Quarry School

Trigonometry: crash course

about 2 h 25 min to listen11 units93 lessons79 questions to try

Short view. Each lesson's rule, its steps and its trap. Switch to Full for a worked example and a question to try in every lesson.Full view. Each lesson's rule, its steps, one worked example with Watch it solved, the trap, and one question to try.

Every unit, and under it every lesson. A unit's own crash course adds the unit's quick checks.

1 Angles and their measure

about 11 min10 lessonsOpen the unit's crash course

1.1 The pieces of an angle and how to name them

about 1 minOpen the full lesson

The rule

A line has no endpoints, a line segment has two, and a ray has one.

In ray OP, O is the endpoint. In ∠AOB, O is the vertex; ∠BOA names the same geometric corner.

How

  1. Count the endpoints to decide whether you have a line, line segment or ray.
  2. For a ray, write the endpoint first and then any point farther along it.
  3. For an angle, identify the shared endpoint and put its letter in the middle.
  4. Use one point from each side as the other two letters. A single letter such as θ or a number such as 1 can also label the angle.
  5. In the table picture, the column under θ gives theta and THAY-tuh. Read each Greek letter by its own name before using it to label an angle.

Worked example

Worked example

Name the corner and its two paths

You are identifying the shared point, the two rays and two names for their corner. Rays OA and OB start at O. Point A is above O and point B is to its right. Name the vertex, both rays and the angle in two ways.

Show the steps and the answer
∠AOB: vertex Overtex
The arrow records ∠AOB: vertex O from the stated starting ray.
  1. The vertex is O.Both paths start at O, the shared point that plays the role of a hinge.
  2. The rays are OA and OB, each read with O first.A ray name starts with its endpoint and then names a point in its forward direction.
  3. Name the angle ∠AOB or ∠BOA.Both names keep the vertex O in the middle and choose one point from each side.
Answer
  • Vertex: O.
  • Rays: OA and OB.
  • Angle: ∠AOB or ∠BOA.
Double-check In each angle name the middle letter is O. The two outer letters identify the two rays, so both names pick out the same corner.

The trap

Naming the angle ∠OAB. Its middle letter is A, so that name asks for a corner at A. Point to the hinge first, then put its letter in the middle.

1.2 An angle records a turn and its direction

Open the full lesson

The rule

Positive angle: counterclockwise rotation.

Negative angle: clockwise rotation. The sign depends only on the direction of the turn, regardless of the initial side.

How

  1. Locate the initial side, the hand's starting position.
  2. Follow the curved arrow from that starting ray to the terminal side.
  3. Use a positive sign for counterclockwise and a negative sign for clockwise.
  4. Count the whole movement, including any full laps. Do not assign a sign from the ending ray's location.

Worked example

Worked example

A positive turn that starts pointing up

You are recording the amount and direction of the turn and where it finishes. The initial side points straight up, at direction 90° from the right. Turn counterclockwise through 50°. What is the signed angle, and which direction does the terminal side point?

Show the steps and the answer
+50°terminal sideinitial side
The arrow records +50° from the stated starting ray.
  1. The signed angle is +50°.The movement is counterclockwise; its starting direction does not change its sign.
  2. The ending direction is 90°+50°=140° from the right.Both direction readings are measured counterclockwise from the same rightward reference, so the turn adds to the initial direction.
  3. The terminal side points up and left.140° lies between the upward direction 90° and the leftward direction 180°.
Answer
  • Signed angle: +50°.
  • Terminal direction: 140° from the right, pointing up and left.
Double-check Turn clockwise through 50° from that final direction: 140° − 50° = 90°, the starting direction. The opposite signed turns undo each other.

The trap

Calling an angle negative because its terminal side points downward. You can turn counterclockwise through 300° and end downward. The arrow's direction gives the sign; the final location does not.

1.3 Coterminal angles: keep the landing, change the journey

Open the full lesson

The rule

An integer n counts complete laps and may be positive, negative, or zero.

360°n means 360°×n.
In degrees, all angles coterminal with θ have measures θ+360°n, where n is any integer. For a one-turn representative use 0°≤θ<360°: an angle that ends on the initial ray, such as 360° or −720°, has one-turn representative 0°.

How

  1. Keep the initial side fixed. A shared terminal ray alone is not enough if the starting rays differ.
  2. If the measurement is negative, add 360° until it is at least 0°.
  3. If it is 360° or more, subtract 360° until it is less than 360°.
  4. For two positive and two negative answers, continue adding or subtracting full turns until you have two distinct answers of each sign.
  5. Check each answer by subtracting the original measure. The difference must be an integer multiple of 360°.

Worked example

Worked example

One landing, many journeys: unwinding 1185°

An angle of 1185° is in standard position: vertex at the origin, initial side along the positive x-axis. (a) Find the angle θ with 0° ≤ θ < 360° that is coterminal with 1185°. (b) Find two positive angles and two negative angles, other than 1185° itself, that are coterminal with 1185°, and check each one.

Show the steps and the answer
105°1185°same terminal side
In standard position.
  1. Picture 1185° in standard position: vertex at the origin, initial side on the positive x-axis, turning counterclockwise for positive measures. Every answer will start from this same initial side.Coterminal angles share both the initial side and the terminal side. Landing on the same ray is not enough if the starting rays differ, so the initial side stays fixed and only the number of full laps may change.
  2. Choose the direction of adjustment. 1185° is not negative, so there is no need to add 360°. It is 360° or more, so subtract 360° at a time.Adding or subtracting 360° is one complete lap. It changes the journey but returns to the same terminal ray. Choose the direction that moves the measure toward 0° ≤ θ < 360°.
  3. Subtract full turns: 1185°-360°=825°, then 825°-360°=465°, then 465°-360°=105°. Stop at 105°.825° and 465° are still 360° or more, so each needs another lap removed. 105° satisfies 0° ≤ 105° < 360°. One more subtraction would give -255°, which is below 0°.
  4. Count the laps removed. There were 3 subtractions, so 1185°=105°+360°×3 and θ=105°.This is the rule θ + 360°n with θ = 105° and n = 3. The angle 1185° reaches the 105° landing after 3 extra complete counterclockwise laps.
  5. Two positive answers other than 1185°: 105° itself, and 105°+360°=465°.Both are greater than 0° and neither equals 1185°. Each is 105° plus a whole number of laps (0 and 1), so each lands on the same terminal ray. 825° would also work, but only two are needed.
  6. Two negative answers: keep subtracting full turns from 105°. 105°-360°=-255°, then -255°-360°=-615°.Each subtraction is one full clockwise lap, so the terminal ray does not move while the measure drops below 0°. -255° is the first negative value, and one more lap gives a second, distinct negative answer.
  7. Check each answer by subtracting the original measure: 105°-1185°=-1080°=360°×(-3); 465°-1185°=-720°=360°×(-2); -255°-1185°=-1440°=360°×(-4); -615°-1185°=-1800°=360°×(-5).Two angles in standard position are coterminal exactly when their difference is an integer multiple of 360°. The multipliers -3, -2, -4 and -5 are all integers, so all four answers share the terminal ray of 1185°.
Answer
(a) θ = 105°, since 1185° = 105° + 360° × 3. (b) Positive: 105° and 465°. Negative: -255° and -615°. Other choices are also correct, such as 825° or -975°, because any 1185° + 360°n with n a nonzero integer is coterminal with 1185°.
Double-check Rebuild 1185° from each answer by adding whole laps: 105° + 360° × 3 = 105° + 1080° = 1185°; 465° + 360° × 2 = 465° + 720° = 1185°; -255° + 360° × 4 = -255° + 1440° = 1185°; -615° + 360° × 5 = -615° + 1800° = 1185°. Independent check of part (a): 1185360 ≈ 3.29, so exactly 3 whole laps fit, and 1185° - 3 × 360° = 1185° - 1080° = 105°, which lies in 0° ≤ θ < 360°. Since 90° < 105° < 180°, all five angles end on the same ray in Quadrant II, as the figure shows.

Work to write

  1. 1185° - 360° = 825°
  2. 825° - 360° = 465°
  3. 465° - 360° = 105°, and 0° ≤ 105° < 360°
  4. θ = 105° (1185° = 105° + 360° × 3)
  5. Positive: 105° and 105° + 360° = 465°
  6. Negative: 105° - 360° = -255° and -255° - 360° = -615°
  7. 105° - 1185° = -1080° = 360° × (-3)
  8. 465° - 1185° = -720° = 360° × (-2)
  9. -255° - 1185° = -1440° = 360° × (-4)
  10. -615° - 1185° = -1800° = 360° × (-5)

The trap

Subtracting 180° to make an angle smaller. A half turn points in the opposite direction. Use a whole 360° turn when you must keep the same terminal side.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

A little more than one lap

You are changing the recorded turn by complete laps while keeping the same final ray. Reduce 405° to a coterminal measurement in 0° ≤ θ < 360°.

Show the steps and the answer
405°45°same terminal side
Remove one 360° turn to leave the same 45° ending ray.
  1. 405°−360°=45°.Remove one whole lap while preserving the terminal side.
  2. 0°≤45°<360°, so stop at 45°.The remainder is in the requested one-lap range; subtracting another 360° would make it negative.
Answer
Coterminal measure: 45°.
Double-check 405° = 360° + 45°, so the original journey is one complete lap followed by the same 45° ending turn.

1.4 A common start makes the landing place meaningful

Open the full lesson

The rule

Coordinates (x, y) give the horizontal position first and vertical position second; (0, 0) records zero in both directions.

Standard position means vertex at (0, 0) and initial side on the positive x-axis. The Roman numerals I, II, III, IV mean 1, 2, 3, 4 and name the regions upper right, upper left, lower left, lower right, in counterclockwise order. A quadrantal angle ends on an axis.

How

  1. Check that the vertex is at the origin and the initial side points right. Otherwise the angle is not in standard position.
  2. Draw the landmarks: right 0°, up 90°, left 180°, down 270°, right again 360°.
  3. Locate the terminal ray between two landmarks and name the quadrant, starting I in the upper right.
  4. If the terminal ray is exactly on an axis, call the angle quadrantal and name the axis instead of a quadrant.
  5. For several turns, remove complete revolutions before comparing to the landmarks.
  6. In the table picture, read a column under Positive x-axis, right, then compare the matching information below it. Each column preserves one complete row of the reference table.

Worked example

Worked example

A region and a boundary

You are locating each finishing ray in a region or on an axis. In standard position, where do the terminal sides of 140° and 270° lie?

Show the steps and the answer
140°: Quadrant IIterminal sideinitial side
An angle of 140°, turned counterclockwise from the positive x axis.
270°: negative y-axisterminal sideinitial side
An angle of 270°, turned counterclockwise from the positive x axis.
  1. Mark 90° up, 180° left and 270° down.Each move from one cardinal direction to the next is a quarter turn of 90°.
  2. 90°<140°<180°, so 140° lies in Quadrant II.The upper-left region is between the upward and leftward rays.
  3. 270° lies on the negative y-axis and is a quadrantal angle.Three quarter turns finish exactly on the downward dividing ray, not inside either neighboring region.
Answer
  • 140°: Quadrant II.
  • 270°: negative y-axis, a quadrantal angle.
Double-check 140° is 50° past straight up but 40° short of left, so it lies between them. 270° is 90° short of a full revolution, so it points down.

The trap

Saying an angle of 90° is in Quadrant I. The upper-right region ends before its boundary. Exactly 90° is on the positive y-axis.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

A region and an axis

You are locating each finishing ray in a region or on an axis. In standard position, where do the terminal sides of 140° and 270° lie?

Show the steps and the answer
140°: Quadrant IIterminal sideinitial side
The same picture again: An angle of 140°, turned counterclockwise from the positive x axis.
270°: negative y-axisterminal sideinitial side
The same picture again: An angle of 270°, turned counterclockwise from the positive x axis.
  1. Mark 90° up, 180° left and 270° down.Each move from one cardinal direction to the next is a quarter turn of 90°.
  2. 90°<140°<180°, so 140° lies in Quadrant II.The upper-left region is between the upward and leftward rays.
  3. 270° lies on the negative y-axis and is a quadrantal angle.Three quarter turns finish exactly on the downward dividing ray, not inside either neighboring region.
Answer
  • 140°: Quadrant II.
  • 270°: negative y-axis, a quadrantal angle.
Double-check 140° is 50° past straight up but 40° short of left, so it lies between them. 270° is 90° short of a full revolution, so it points down.

1.5 Angle sizes and two ways to fill a corner

Open the full lesson

The rule

Acute: 0°<θ<90°.

Right: θ=90°. Obtuse: 90°<θ<180°. Straight: θ=180°. Positive complements sum to 90°; positive supplements sum to 180°.

How

  1. Compare the angle to 0°, 90° and 180° to classify its size.
  2. For a complement, subtract from 90° and require the result to be positive.
  3. For a supplement, subtract from 180° and require the result to be positive.
  4. Add the proposed pair to check the total. Do not use a negative leftover as a positive complement.
  5. In the table picture, read a column under Acute angle, then compare the matching information below it. Each column preserves one complete row of the reference table.

Worked example

Worked example

A small angle and an angle too large for a complement

You are comparing openings and finding the positive pieces needed to complete 90° and 180° where possible. Find the complement and supplement of 32°. Then decide whether 113° has a positive complement and find its supplement.

Show the steps and the answer
32°58°sum = 90°
32° and its positive complement fill the right-angle corner.
113°67°sum = 180°
The obtuse 113° opening has a positive supplement of 67°.
  1. For 32°, complement =90°−32°=58°.Complementary angles fill a right angle together.
  2. For 32°, supplement =180°−32°=148°.Supplementary angles fill a straight angle together.
  3. For 113°,90°−113°=−23°, so there is no positive complement.113° already exceeds the whole square corner; the leftover would violate the positivity requirement.
  4. For 113°, supplement =180°−113°=67°.67° is a positive amount completing the straight angle.
Answer
  • 32° complement: 58°.
  • 32° supplement: 148°.
  • 113° complement: no positive complement.
  • 113° supplement: 67°.
Double-check 32° + 58° = 90°, 32° + 148° = 180°, and 113° + 67° = 180°. The invalid complement −23° fails the required positive-angle condition.

The trap

Interchanging complement and supplement. Remember C comes before S: Complement fills the smaller 90° corner; Supplement fills the larger 180° corner.

1.6 Degrees, minutes and seconds: smaller pieces of a turn

about 5 minOpen the full lesson

The rule

1°=60′=3600″ and 1′=60″.

Decimal degrees =D+M60+S3600. For subtraction: 90°=89°59′60″ and 180°=179°59′60″.Here D, M, and S count degrees, minutes, and seconds, respectively.

How

  1. For DMS subtraction, align the degree, minute and second columns. If needed, borrow one degree as 60 minutes, then one minute as 60 seconds.
  2. Subtract each column after the units are available. Check by adding your answer to the original angle.
  3. For DMS to decimal degrees, keep the degrees and add minutes ÷ 60 and seconds ÷ 3600.
  4. For decimal degrees to DMS, keep the whole degrees. Multiply only the leftover decimal by 60; keep its whole minutes.
  5. Multiply the new leftover decimal minute by 60 for seconds. Round at the end; if seconds round to 60, carry one minute. If minutes reach 60, carry one degree.
  6. In the table picture, read a column under Degree, °, then compare the matching information below it. Each column preserves one complete row of the reference table.

Worked example

Worked example

A triangle's third angle in degrees, minutes and seconds

A triangular plot of land has corners P, Q and R. A surveyor measures the angle at Q as ∠Q = 48°37′25″. A mapping program lists the angle at P in decimal degrees as ∠P = 63.4333°. (a) Write ∠P in degrees, minutes and seconds, rounded to the nearest second. (b) The three angles of a triangle add to 180°. Using your answer to (a), find ∠R in degrees, minutes and seconds. (c) Write ∠R in decimal degrees, rounded to four decimal places.

Show the steps and the answer
  1. (a) Split ∠P=63.4333° into whole degrees and a leftover. Keep 63°. The leftover is 0.4333 of a degree.The whole-number part is already in degrees. Only the decimal part needs to be changed into minutes and seconds.
  2. Multiply only the leftover by 60: 0.4333×60=25.998′. Keep the whole minutes, 25′, and set aside the leftover 0.998′.1° = 60′, so a fraction of a degree times 60 gives minutes. Do not round 25.998′ to 26′ yet, because its decimal part still holds the seconds.
  3. Multiply the leftover minute by 60: 0.998×60=59.88″. Now round to the nearest second: 59.88″≈60″.1′ = 60″. Rounding happens only at the end, on the seconds.
  4. Since 60″=1′, carry one minute, so 25′60″ becomes 26′0″. The minutes, 26, are less than 60, so no degree is carried. This gives ∠P≈63°26′0″.A finished DMS angle never shows 60 seconds or 60 minutes. A full 60 is traded for one of the next larger unit, so writing 63°25′60″ would be a mistake.
  5. (b) Write ∠R=180°−∠Q−∠P, and rewrite 180° as 179°59′60″.180° has 0′ and 0″, so those columns have nothing to subtract from. Borrowing 1° as 60′, then 1′ as 60″, gives the same angle with enough in every column.
  6. Align the columns and subtract ∠Q from 179°59′60″. Seconds: 60−25=35″. Minutes: 59−37=22′. Degrees: 179−48=131°. This leaves 131°22′35″.Degrees sit under degrees, minutes under minutes and seconds under seconds. Every top entry is at least as large as the one below it, so each column subtracts on its own.
  7. Align ∠P=63°26′0″ under 131°22′35″. Seconds: 35−0=35″. In the minutes column, 22′ is less than 26′, so borrow one degree as 60 minutes: 131°22′35″=130°82′35″.1° = 60′, so moving one degree into the minutes column changes how the angle is written but not its size. It makes the minutes column large enough to subtract.
  8. Finish the subtraction. Minutes: 82−26=56′. Degrees: 130−63=67°. So ∠R=67°56′35″.Once every column has enough units, each column is subtracted separately. The seconds column already gave 35″.
  9. (c) Keep the 67 degrees and add minutes ÷ 60 and seconds ÷ 3600: 67+5660+353600=67+0.933333… +0.009722… =67.943055…One minute is 160 of a degree and one second is 13600 of a degree.
  10. Round to four decimal places: 67.943055… ≈67.9431°.The digit after the fourth decimal place is 5, so the fourth decimal place rounds up from 0 to 1.
Answer
  • (a) ∠P ≈ 63°26′0″
  • (b) ∠R = 67°56′35″
  • (c) ∠R ≈ 67.9431°
Double-check Add the three angles column by column: 48°37′25″ + 63°26′0″ + 67°56′35″ = 178°119′60″. Since 60″ = 1′, this is 178°120′0″. Since 120′ = 2°, it is 180°0′0″, as it must be for a triangle ✓. Check with decimal degrees: ∠Q = 48 + 3760 + 253600 ≈ 48.6236. Also, 63 + 2660 = 63.43333…, which rounds to the listed 63.4333. Then 48.6236 + 63.4333 + 67.9431 = 180.0000 ✓. Convert 67.9431° back to DMS: 0.9431 × 60 = 56.586′, and 0.586 × 60 = 35.16″ ≈ 35″. This gives 67°56′35″ again ✓.

Work to write

  1. 0.4333 × 60 = 25.998′ → 25′
  2. 0.998 × 60 = 59.88″ ≈ 60″ = 1′
  3. ∠P ≈ 63°26′0″
  4. 180° = 179°59′60″
  5. 179°59′60″−48°37′25″=131°22′35″
  6. 131°22′35″ = 130°82′35″
  7. 130°82′35″−63°26′0″=67°56′35″
  8. ∠R = 67°56′35″
  9. 67+5660+353600=67.943055…
  10. ∠R ≈ 67.9431°
  11. Check: 48°37′25″ + 63°26′0″ + 67°56′35″ = 178°119′60″ = 180°

The trap

Treating DMS as decimal digits. 6′ is 660° = 0.1°, not 0.06°. Borrow and carry in groups of 60, not 100.

Quick check

Try it before you open its steps. It is question 4 of 8 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 8

Borrowing twice to subtract from 90°: tilting a telescope straight up

A telescope starts level, pointing at the horizon. The display on its mount shows that it has now been tilted upward through 34°19′52″. Pointing straight up, at the point directly overhead, takes a tilt of exactly 90° from level. Through what further angle must the telescope be tilted upward to point straight up? Give the angle in degrees, minutes and seconds, show each exchange you make, and check your answer by addition.

Show the steps and the answer
  1. Set up the subtraction 90°−34°19′52″. Write 90° as 90°00′00″ so the columns line up: 90° over 34°,00′ over 19′,00″ over 52″.Straight up is 90° from level, so the tilt still needed is 90° minus the tilt already made. Only like units can be subtracted. Writing 00′ and 00″ shows that the top minutes and seconds columns are empty.
  2. The seconds column needs 00″ − 52″, which cannot be done. The minutes column has no minute to lend. So first borrow one degree as 60 minutes: 90°00′00″=89°60′00″.1° = 60′, so trading one degree for 60 minutes leaves the angle the same size. The seconds can only borrow from the minutes column, so that column must hold some minutes before it can lend one.
  3. Now borrow one of those minutes as 60 seconds: 89°60′00″=89°59′60″.1′ = 60″, so the angle is still unchanged. Together the two exchanges give the rule 90° = 89°59′60″. Now every top entry is at least the entry below it: 89 ≥ 34, 59 ≥ 19 and 60 ≥ 52.
  4. Subtract column by column. Seconds: 60″−52″=8″. Minutes: 59′−19′=40′. Degrees: 89°−34°=55°.After the exchanges each column holds enough of its own unit. Each column can therefore be subtracted on its own with no further borrowing.
  5. Combine the three column results: 55°40′08″.The minutes (40) and the seconds (8) are each less than 60. Nothing needs to be carried, so the angle is already in standard degrees-minutes-seconds form.
Answer
The telescope must be tilted upward a further 55°40′08″.
Double-check Add the answer to the original tilt, column by column. Seconds: 8″ + 52″ = 60″ = 1′, so write 0″ and carry 1′. Minutes: 40′ + 19′ + 1′ = 60′ = 1°, so write 0′ and carry 1°. Degrees: 55° + 34° + 1° = 90°. So 55°40′08″ + 34°19′52″ = 90°00′00″ = 90°, which is exactly straight up. Before carrying, the column sums are 89°59′60″, the same as the rewritten 90° used in the subtraction.

Work to write

  1. 90°−34°19′52″
  2. 90°00′00″ = 89°60′00″ = 89°59′60″
  3. 60″−52″=8″,59′−19′=40′,89°−34°=55°
  4. Further tilt = 55°40′08″
  5. Check: 55°40′08″ + 34°19′52″ = 89°59′60″ = 90°

1.7 Radians count radius-lengths of curved distance

about 2 minOpen the full lesson

The rule

For a nonnegative central opening, θ=sr radians, where s is the chosen arc length and r > 0 is the radius; signed turns use the direction rule.

180°=π radians; a full revolution is 360°=2π radians.

How

  1. Locate the center and the two radii forming the central angle. Follow the curved arc between their endpoints, because s measures the edge rather than a straight shortcut.
  2. Express s and r in the same length unit, because their ratio must compare equal kinds of length.
  3. Divide arc length by radius: θ = sr. The result counts radius-lengths, so it is in radians.
  4. Write a degree sign for degrees. For radians, write the word when clarification helps; the instructor's notation usually omits a unit symbol.
  5. Rebuild familiar angles from the half-turn fact 180° = π. The table is a reference you can reconstruct, not a separate set of facts to memorize.
  6. In the table picture, the column under 30° gives π6 because six 30° pieces make 180°. Read the other columns the same way and rebuild each from 180° = π.

Worked example

Worked example

Count radius-lengths on two sizes of circle

You are finding the arc-to-radius count before and after doubling all lengths. An arc is 7.5 cm long on a circle of radius 5 cm. Find its central angle in radians. Then enlarge the circle and arc to twice their size.

Show the steps and the answer
1.5 radians5 cm7.5 cm
A central angle of 85.9437° with its radius 5 cm and its arc 7.5 cm.
1.5 radians10 cm15 cm
A central angle of 85.9437° with its radius 10 cm and its arc 15 cm.
  1. θ=sr=7.5cm5cm.Radian measure counts the arc in units of the radius, and both lengths use centimeters.
  2. θ=7.5÷5=1.5 radians.One 5 cm length plus half of another 5 cm length makes the 7.5 cm arc.
  3. After enlargement, s=15 cm and r=10 cm.Doubling the whole picture multiplies every length by 2 while keeping the opening unchanged.
  4. The enlarged angle is 1510=1.5 radians too.The same factor of 2 appears on the top and bottom and cancels.
Answer
  • Original circle: 1.5 radians.
  • Enlarged circle: 1.5 radians.
Double-check Lay out one whole radius and half a radius along either arc: 5 + 2.5 = 7.5 cm, and 10 + 5 = 15 cm. Both arcs contain the same one-and-a-half measuring units.

The trap

Reading 30 and 30° as the same angle. In the instructor's angle notation, a number without a degree sign is in radians. Write ° whenever the measurement is in degrees, and say radians when a bare number could be unclear.

1.8 Convert the unit, then locate a radian angle

Open the full lesson

The rule

Degrees → radians: multiply by πradians180°.

Radians → degrees: multiply by 180°πradians.Radian coterminal angles are θ+2πn, where n is any integer; reduce to 0≤θ<2π before locating the terminal side.

How

  1. Identify the starting unit. A degree sign means degrees; the instructor's angle notation without that sign means radians.
  2. Write the multiplier with the starting unit on the bottom, because the matching unit on top and bottom then cancels.
  3. Multiply the numerators and denominators and reduce common factors. Treat π as one factor, because it cancels only against another π.
  4. Keep an exact π fraction when possible. If a decimal degree answer is requested, calculate from the exact expression and round at the end.
  5. To locate a radian angle, add or subtract 2π until it is in 0 ≤ θ < 2π. Use a common denominator when adding or subtracting π fractions.
  6. Compare with the exact quarter-turn boundaries. Equality means the angle is quadrantal and belongs to no quadrant; decimal landmarks are rounded guides.
  7. In the table picture, read a column under I, then compare the matching information below it. Each column preserves one complete row of the reference table.

Worked example

Worked example

Two directions of conversion

You are changing the measuring unit in both directions and locating both terminal rays. Convert 225° to radians, then convert 7π6 radians to degrees. Locate both terminal sides.

Show the steps and the answer
225° = 5π/4terminal sideinitial side
The arrow records 225° = 5π4 from the stated starting ray.
7π/6 = 210°terminal sideinitial side
The arrow records 7π6 = 210° from the stated starting ray.
  1. 225°×πradians180°=225π180 radians.Degrees cancel, leaving the desired radian unit.
  2. 225π180=5π4 radians.Dividing 225 and 180 by their common factor 45 preserves the fraction's value.
  3. 7π6 radians ×180°πradians=7×180°6=210°.The radian unit and π cancel, and 180 ÷ 6 = 30, so 7 × 30° = 210°.
  4. Both terminal sides are in Quadrant III.180° < 210° < 270° and 180° < 225° < 270°, strictly between the axes.
Answer
  • 225° = 5π4 radians, Quadrant III.
  • 7π6 radians = 210°, Quadrant III.
Double-check 225° is five 45° turns, so its radian measure is 5 × π4. Also 7π6 = π + π6, which is 180° + 30° = 210°.

The trap

Using a rounded boundary such as 1.57 as though it were exactly π2. An angle of 1.57 radians is slightly below the exact axis value. Use exact π boundaries for exact angles, and use the decimals only when the angle lies clearly between them.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Plain radians require π in the divisor

You are describing the same turn with a different measuring unit. Convert 2.2 radians to degrees, rounded to two decimal places.

Show the steps and the answer
2.2 radians ≈ 126.05°terminal sideinitial side
The arrow records 2.2 radians ≈ 126.05° from the stated starting ray.
  1. 2.2 radians ×180°πradians=396°π.The unit cancels, but there is no π in the original numerator to cancel the divisor π.
  2. 396°π≈126.0507149°.Dividing by π gives the degree measurement; keep extra digits before the final rounding.
  3. θ≈126.05°.The third decimal digit is 0, so the hundredths digit stays 5.
Answer
θ ≈ 126.05°.
Double-check π2 < 2.2 < π, so the degree answer should lie between 90° and 180°. It does. Using the unrounded result times π180° returns 2.2 radians.

1.9 Arc length: how far you travel around the rim

Open the full lesson

The rule

s=rθ; θ=sr; r=sθ when θ>0.

θ must be in radians.
For one physical slice, r > 0 and 0≤θ≤2π; arc length is a nonnegative size, also called its magnitude.

How

  1. Identify the chosen arc, its radius and its central angle. Use the physical opening's nonnegative size, because the length measures distance rather than clockwise or counterclockwise direction. Magnitude means size with the direction sign removed: −75° has magnitude 75°. A chosen 300° arc remains 300°; using 60° would select a different arc.
  2. If the angle is in degrees, convert it to radians first by multiplying by πradians180°.
  3. Choose the form that isolates the missing quantity: multiply rθ for length, divide s by r for angle, or divide s by θ for radius.
  4. Use matching length units for s and r. Keep exact π expressions through the calculation and round only the final decimal answer.
  5. Check independently using the angle's fraction of a full turn times the circumference. For a slice no larger than the whole circle, its arc cannot exceed 2πr.

Worked example

Worked example

Convert a degree opening before finding the arc

You are finding distance along the specified curved rim and expressing that length exactly and as a rounded decimal. A circle has radius 8 cm. Find the arc cut off by a 75° central angle, exactly and to two decimal places.

Show the steps and the answer
75° = 5π/128 cm10π/3 cm
The same picture again: A central angle of 75° with its radius 8 cm and its arc 10π/3 cm.
  1. θ=75°×πradians180°=75π180=5π12 radians.s = rθ requires radians; dividing 75 and 180 by 15 reduces the fraction.
  2. s=8×5π12=40π12 cm.The radian count tells how many 8 cm radius-lengths fit along the arc.
  3. s=10π3 cm.Divide numerator and denominator by 4 to keep the exact result reduced.
  4. s≈10.47 cm.10π3 ≈ 10.4719755, which rounds to 10.47 at two decimal places.
Answer
  • Exact arc length: 10π3 cm.
  • Rounded arc length: approximately 10.47 cm.
Double-check 75° uses 75360 = 524 of the circle. Its circumference is 2π × 8 = 16π cm. Thus 524 × 16π = 80π24 = 10π3 cm, the same result without the radian arc formula.

The trap

Putting 75 directly into s = rθ when the opening is 75°. The formula counts radius-lengths, so θ must be 5π12 radians. Write the conversion before substituting, and keep the answer in a length unit rather than degrees.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Decimal radians

You are finding distance along the curved rim, rather than straight across the circle. A circle has radius 10 units. How long is its arc for θ = 1.2 radians?

Show the steps and the answer
1.2 radians10 units12 units
A central angle of 68.7549° with its radius 10 units and its arc 12 units.
  1. s=10×1.2.The angle is already in radians, so s = rθ applies directly.
  2. s=12 units.Ten copies of 1.2 total 12, and arc length uses the radius's length unit.
Answer
s = 12 units.
Double-check The turn fraction is 1.22π. Multiply it by the 20π-unit circumference: 1.22π × 20π = 12 units.

1.10 Sector area: how much of the disk you keep

about 2 minOpen the full lesson

The rule

A=12r2θ, with θ in radians; for degrees use A=θ360°πr2.

For one physical slice, r > 0 and 0≤θ≤2π in radians; sector area is a nonnegative size, also called its magnitude.

How

  1. Identify the sector, the filled slice between two radii and their arc, because area measures the inside rather than the rim.
  2. Use the physical slice's nonnegative opening. Convert a degree measurement to radians before using A = 12r2θ. A 300° sector is the large slice; replacing it by 60° changes the chosen region. Magnitude means the nonnegative size of the stated opening.
  3. Square the radius first: r2 means r × r. Multiply that result by the radian angle and by 12.
  4. Keep π exact when possible, then round only the final requested decimal. Label the result in square units.
  5. Check with the slice's fraction of 360° times πr2. A slice no larger than the full disk cannot have more than the disk's area.

Worked example

Worked example

A quarter-disk sector

You are finding the amount of filled surface in the specified circular slice. Find the exact area of a sector with radius 7 cm and central angle 90°.

Show the steps and the answer
π/2 radians7 cm7π/2 cm
A central angle of 90° with its radius 7 cm, its arc 7π/2 cm and its sector shaded.
  1. 90°×πradians180°=π2 radians.The sector formula uses radians, and 90 is half of 180.
  2. r2=7×7=49cm2.Area uses the square of the radius, so the length unit is squared too.
  3. A=12×49×π2=49π4cm2.Multiply the numerators 1 × 49 × π and denominators 2 × 2.
Answer
A = 49π4 cm2, exactly.
Double-check The angle is 90360 = 14 of the disk. Its full area is π × 72 = 49π cm2; one quarter is 49π4 cm2.

The trap

Using r instead of r2, or reporting area in centimeters. Write the radius multiplication explicitly, such as 72 = 7 × 7 = 49, and give square units. The angle must also be in radians for A = 12r2θ.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

One radian of surface

You are finding the amount of filled surface in the specified circular slice. Find the sector area for r = 5 cm and θ = 1 radian.

Show the steps and the answer
1 radian5 cm5 cm
A central angle of 57.2958° with its radius 5 cm, its arc 5 cm and its sector shaded.
  1. r2=5×5=25cm2.Squaring the radius provides the area scale.
  2. A=12×25×1=252=12.5cm2.The angle is in radians; taking half of 25 gives 12.5 exactly.
Answer
A = 12.5 cm2, exactly.
Double-check One radian uses 12π of a full turn. That fraction of the 25π cm2 disk is 12π × 25π = 252 cm2.

2 Trigonometric functions

about 35 min10 lessonsOpen the unit's crash course

2.1 Right triangles and the names of their sides

about 2 minOpen the full lesson

The rule

For an acute angle θ of a right triangle: hyp faces the 90° corner; opp is the leg facing θ; adj is the leg touching θ.

The hypotenuse is excluded when naming adj.
The two acute angles add to 90°.

How

  1. Find the square corner. The side across from it is the hypotenuse; label it hyp.
  2. Put your finger on the angle the problem asks about.
  3. Of the two legs, the one touching that angle is adj.
  4. The leg that does not touch that angle is opp.
  5. If the problem switches to the other acute angle, swap opp and adj. The hyp stays the same.

Worked example

Worked example

Name the sides from both acute angles

A right triangle has legs 3 and 4 and hypotenuse 5. Angle A is the corner where the leg 4 meets the hypotenuse. Angle B is the corner where the leg 3 meets the hypotenuse. Name opp, adj and hyp for A, then for B. In words, label the same sides from two different corners.

Show the steps and the answer
θ435
From A, leg 4 touches the chosen corner.
θ345
Redraw from B with the chosen angle at θ: the two leg names swap.
  1. The legs 3 and 4 meet at the square corner, and the side across from it is 5. So hyp =5 for both angles.The hypotenuse faces the right angle, whichever acute angle you stand at.
  2. Stand at A. The leg touching A is 4, so adj =4.Adjacent means next to: it is one of the two sides that form the corner at A, and it is not the hypotenuse.
  3. The leg across from A is 3, so opp =3.It is the one side that does not touch A.
  4. Stand at B. Now the leg 3 touches you and the leg 4 is across: adj =3, opp =4, hyp =5.Moving to the other acute angle swaps opposite and adjacent.
Answer
  • At A:
  • opp = 3
  • adj = 4
  • hyp = 5
  • At B:
  • opp = 4
  • adj = 3
  • hyp = 5
Double-check 32 + 42 = 9 + 16 = 25 = 52, so 5 is the hypotenuse, and it is the longest side, as it must be.

The trap

Calling the hypotenuse the adjacent side. The hypotenuse also touches θ, but it is never called adjacent. Name the hypotenuse first, set it aside, and only then decide which of the two legs touches θ.

2.2 The six trig functions of an acute angle

about 4 minOpen the full lesson

The rule

For an acute angle in a right triangle: sinθ=opphyp,cosθ=adjhyp,tanθ=oppadj.

cscθ=hypopp,secθ=hypadj,cotθ=adjopp.

How

  1. Name opp, adj and hyp from the angle asked about.
  2. If a side is missing, find it with the Pythagorean theorem.
  3. Write sin, cos and tan with SOH-CAH-TOA.
  4. Flip each one: csc is sin upside down, sec is cos upside down, cot is tan upside down.
  5. Reduce every fraction and rationalize any square root left on the bottom.

Worked example

Worked example

Six trig functions of an acute angle when a leg is missing

In right triangle KLM the right angle is at L. The leg KL is 3 units long and the hypotenuse KM is 7 units long. Find the exact values of all six trigonometric functions of angle K. Write each answer as a reduced fraction with no square root in the denominator.

Show the steps and the answer
  1. Name the sides from angle K. The hypotenuse is KM =7, the side across from the right angle at L. The adjacent side is KL =3, the leg that touches K. The opposite side is LM, the leg across from K. Its length is not given.Opp and adj depend on which acute angle is asked about, but hyp is always across from the right angle. Naming the sides from angle K first keeps its ratios from being swapped with those of angle M.
  2. Find the missing leg with the Pythagorean theorem: KL2+LM2=KM2, so 32+LM2=72. Then 9+LM2=49, so LM2=40 and LM =40=4·10=210.In a right triangle the squares of the legs add up to the square of the hypotenuse. A length is positive, so only the positive root counts. Taking the perfect square 4 out of 40 puts the root in simplest form.
  3. Write the three basic ratios with SOH-CAH-TOA, using opp =210, adj =3 and hyp =7: sinK=opphyp=2107,cosK=adjhyp=37,tanK=oppadj=2103.SOH: sine is opposite over hypotenuse. CAH: cosine is adjacent over hypotenuse. TOA: tangent is opposite over adjacent.
  4. Flip each ratio to get the other three: cscK=7210,secK=73,cotK=3210.Cosecant, secant and cotangent are the reciprocals of sine, cosine and tangent: csc K = hypopp, sec K = hypadj, cot K = adjopp.
  5. Two answers have a root on the bottom, so multiply top and bottom of each by 10: cscK=7210·1010=71020, and cotK=3210·1010=31020. Then confirm that all six fractions are reduced. None of the pairs 2 and 7, 3 and 7, 2 and 3, 7 and 20, or 3 and 20 shares a common factor.1010 equals 1, so multiplying by it does not change the value. Since 210 · 10 = 2 · 10 = 20, the root leaves the bottom. A fraction is in simplest form when the whole numbers on top and bottom share no factor greater than 1.
Answer
sin K = 2107, cos K = 37, tan K = 2103, csc K = 71020, sec K = 73, cot K = 31020
Double-check Pythagorean identity: sin2 K + cos2 K = (2107)2 + (37)2 = 4049 + 949 = 4949 = 1. Tangent from sine and cosine: tan K = sinKcosK = 2107 ÷ 37 = 2103. Each flipped pair multiplies to 1: sin K · csc K = 2107 · 71020 = 14·10140 = 1, cos K · sec K = 37 · 73 = 1, and tan K · cot K = 2103 · 31020 = 6·1060 = 1.

Work to write

  1. opp = LM, adj = KL = 3, hyp = KM = 7
  2. LM2 = 72 − 32 = 49 − 9 = 40
  3. LM = 40 = 210
  4. sinK=2107
  5. cosK=37
  6. tanK=2103
  7. csc K = 7210 = 71020
  8. sec K = 73
  9. cot K = 3210 = 31020

The trap

Naming sides by where they sit on the page. Figures put the angle in different corners, so the leg on the left is not always adjacent. Always name the sides from the angle's point of view.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

Reduce enlarged ratios

opp = 9, adj = 12, hyp = 15. Find all six functions. In words, divide named lengths and reduce.

Show the steps and the answer
θ12915
A right triangle: opposite 9, adjacent 12, hypotenuse 15.
  1. sinθ=915=35,cosθ=1215=45,tanθ=912=34.Divide each top and bottom by their common factor 3.
  2. cscθ=53,secθ=54,cotθ=43.Flipping reduced ratios gives reduced reciprocals.
Answer
  • sinθ=35
  • cosθ=45
  • tanθ=34
  • csc θ = 53
  • sec θ = 54
  • cot θ = 43
Double-check 92 + 122 = 152. Tripling every side of rung 1 kept the ratios unchanged.

2.3 The fundamental identities

about 4 minOpen the full lesson

The rule

sin2θ+cos2θ=1 for every angle.

tanθ=sinθcosθ and secθ=1cosθ require cosθ≠0; cotθ=cosθsinθ and cscθ=1sinθ require sinθ≠0.
Where both reciprocal expressions exist, cotθ=1tanθ. tan2θ+1=sec2θ requires cosθ≠0; cot2θ+1=csc2θ requires sinθ≠0.

How

  1. Read squared notation first: sin2θ = (sin θ)2. Square the trig value, not the angle.
  2. If the given value is csc or sec, flip it to obtain sin or cos. If it is cot, its reciprocal gives tan only when cot is nonzero and tan exists.
  3. If sin or cos is known, substitute into sin2θ + cos2θ = 1. Subtract its square from both sides to isolate the missing square.
  4. Take the nonnegative square root to find the size. For an acute angle the missing sine or cosine is positive, so choose that sign. 0 is 0, not positive.
  5. If tan is known, use tan2θ + 1 = sec2θ, choose positive sec for an acute angle, then flip for cos. Multiply tan by cos for sin.
  6. Use tan = sin ÷ cos and cot = cos ÷ sin when their denominators are nonzero. Flip cosine for secant and sine for cosecant.
  7. Reduce and rationalize. Check that the squares add to 1 and each reciprocal pair multiplies to 1.

Worked example

Worked example

Recover five functions from an acute cosecant

In a right triangle, csc θ = 7. Find the other five functions. In words, you know the hypotenuse divided by the opposite leg; recover the remaining ratios.

Show the steps and the answer
θ4√317
A right triangle: opposite 1, adjacent 43, hypotenuse 7.
θ4√317
The same picture again: A right triangle: opposite 1, adjacent 43, hypotenuse 7.
input identityoutput reasoncsc θ = 1/(sin θ)hyp/opp is opp/hyp upside downsec θ = 1/(cos θ)hyp/adj is adj/hyp upside downcot θ = 1/(tan θ)adj/opp flips opp/adj where tan exists and is nonzero; cot = cos ÷ sin applies more generallytan θ = (sin θ)/(cos θ)opp/hyp ÷ adj/hyp = opp/hyp × hyp/adj = opp/adjcot θ = (cos θ)/(sin θ)adj/hyp ÷ opp/hyp = adj/opp, provided sin θ ≠ 0sin²θ + cos²θ = 1divide a² + b² = c² by c²tan²θ + 1 = sec²θdivide every term by nonzero cos²θcot²θ + 1 = csc²θdivide every term by nonzero sin²θ|sin θ| <= 1 and |cos θ| <= 1Absolute value bars give size. Both nonnegative squares add to 1, so each square is at most 1 and each value has size at most 1. In a triangle a leg cannot exceed hyp.
Reference table: read the reason entry directly under its identity label.
  1. sinθ=1÷7=17.Cosecant and sine are reciprocals.
  2. sin2θ+cos2θ=1 becomes 149+cos2θ=1. Subtract 149 from both sides: cos2θ=4949−149=4849.This isolates the unknown cosine square. Subtracting the same fraction from both sides keeps the equation balanced.
  3. cosθ=4849=487=437.48 = 16×3 = 43. Cosine is positive for an acute angle.
  4. tanθ=17÷437=17×743=143=312.The 7s cancel; multiplying top and bottom by 3 gives bottom 4 × 3 = 12.
  5. cotθ=1÷143=43; secθ=1÷437=743=7312.Both known values are nonzero, so their reciprocals exist. For secant multiply top and bottom by 3; the bottom becomes 4 × 3 = 12.
Answer
  • sinθ=17
  • cosθ=437
  • tanθ=312
  • cot θ = 43
  • sec θ = 7312
Double-check A triangle with opp = 1 and hyp = 7 has adj = 49−1 = 43. Its cosine is 437, independently confirming the identity method. The square check is 149 + 4849 = 1.

The trap

Reading sin2θ as sin(θ2). sin2θ means (sin θ)2: find sine first, then square its value. Also, sin2θ + cos2θ = 1 relates squares; sin θ + cos θ is usually not 1. With sine 35 and cosine 45, the ordinary sum is 75.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

The given value is a reciprocal

θ is acute and sec θ = 54. Find the other five functions. In words, obtain cosine first.

Show the steps and the answer
θ435
A right triangle: opposite 3, adjacent 4, hypotenuse 5.
  1. cosθ=1÷54=45.Secant is the nonzero reciprocal of cosine.
  2. sin2θ=1−1625=925, so sinθ=35.Subtract the cosine square, then take the positive acute sine.
  3. tanθ=35÷45=34,cotθ=43.Divide the outputs in the required orders.
  4. cscθ=53.Flip sine; secant was already given.
Answer
  • sinθ=35
  • cosθ=45
  • tanθ=34
  • cot θ = 43
  • csc θ = 53
Double-check 54 × 45 = 1, and 925 + 1625 = 1.

2.4 The special angles: 30°, 45° and 60°

about 3 minOpen the full lesson

The rule

45°,45°,90°: sides 1, 1, 2.

30°,60°,90°: the side across from 30° is 1, across from 60° is 3, across from 90° is 2. sin30°=12,sin45°=22,sin60°=32; the cosines are the same list in reverse order. For an angle that makes full turns and then ends on an acute ray, we define its trig values to be those of that acute direction; this extends the triangle definition using the terminal side.

How

  1. Sketch the triangle that contains your angle and write its three sides.
  2. Stand at your angle and name opp, adj and hyp.
  3. Read sin, cos and tan with SOH-CAH-TOA.
  4. Flip for csc, sec and cot, and rationalize.
  5. Use the sine reference diagram for the three acute special angles: each input and its exact output share one column. The axis lesson will add the two endpoint columns at 0° and 90°.

Worked example

Worked example

Read six ratios from a scaled special triangle

A right triangle has opposite leg 43, adjacent leg 4 and hypotenuse 8, with respect to β. Find all six functions. In words, turn these three lengths into six ratios.

Show the steps and the answer
θ44√38
A right triangle: opposite 43, adjacent 4, hypotenuse 8.
θ44√38
The same picture again: A right triangle: opposite 43, adjacent 4, hypotenuse 8.
input θoutput radians30°π/645°π/460°π/3
Reference table: read the radians entry directly under its θ label.
input θoutput sin θ30°1/245°(√2)/260°(√3)/2
Reference table: read the sin θ entry directly under its θ label.
input θoutput cos θ30°(√3)/245°(√2)/260°1/2
Reference table: read the cos θ entry directly under its θ label.
input θoutput tan θ30°(√3)/345°160°√3
Reference table: read the tan θ entry directly under its θ label.
input θoutput cot θ30°√345°160°(√3)/3
Reference table: read the cot θ entry directly under its θ label.
input θoutput sec θ30°(2√3)/345°√260°2
Reference table: read the sec θ entry directly under its θ label.
input θoutput csc θ30°245°√260°(2√3)/3
Reference table: read the csc θ entry directly under its θ label.
  1. opp =43, adj =4, hyp =8.The question identifies the legs relative to β.
  2. sinβ=438=32; cosβ=48=12.Sine uses opposite over hypotenuse; cosine uses adjacent over hypotenuse. Divide top and bottom by 4.
  3. tanβ=434=3; cotβ=443=13=33.Tangent and cotangent compare the legs in opposite orders.
  4. secβ=84=2; cscβ=843=23=233.Use hypotenuse over adjacent and hypotenuse over opposite; rationalize the last denominator.
Answer
  • sinβ=32
  • cosβ=12
  • tanβ=3
  • cot β = 33
  • sec β = 2
  • csc β = 233
Double-check (43)2 + 42 = 48 + 16 = 64 = 82. Dividing every length by 4 gives the special triangle with lengths 3, 1 and 2.

The trap

Swapping the 30° and 60° values. The shortest side, 1, faces the smallest angle, 30°, so sin 30° = 12 is the small sine and sin 60° = 32 (about 0.866) is the large one. From 0° to 90°, sine grows as the angle grows.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

Rationalize an equal-leg reciprocal

Find sec 405° exactly. In words, find hypotenuse over adjacent after removing a full turn.

Show the steps and the answer
45°405°same terminal side
The final ray is the equal-leg triangle's ray.
  1. 405°−360°=45°.A full turn ends on the same ray, so use the equal-leg triangle.
  2. cos405°=12=22.Adjacent over hypotenuse is 1 over 2; multiply top and bottom by 2.
  3. sec405°=1÷22=22=222=2.Secant flips the nonzero cosine; rationalize with 2 and reduce.
Answer
sec 405° = 2
Double-check cos 405° = 22, so their product is 22 = 1.

2.5 Using the identities: rewrite and prove

about 2 minOpen the full lesson

The rule

For an acute angle, cosθ=1−sin2θ and tanθ=sinθ1−sin2θ.

An identity holds on its common domain. Use sinθ≠0 when dividing by sinθ and cosθ≠0 when dividing by cosθ.

How

  1. State the allowed inputs before rewriting: tan and sec need cos θ ≠ 0; cot and csc need sin θ ≠ 0. A displayed fraction also needs its denominator nonzero.
  2. Pick the messier side, usually the one with more terms or fractions.
  3. Rewrite every tan, cot, sec and csc using sin θ and cos θ.
  4. Combine fractions over a common denominator, or multiply out brackets.
  5. Replace 1 − sin2θ with cos2θ, 1 − cos2θ with sin2θ, and sin2θ + cos2θ with 1.
  6. Cancel common factors only when those factors are nonzero. Stop at the other side; preserve the original allowed inputs.

Worked example

Worked example

Prove sec θ − cos θ = sin θ tan θ

Prove sec θ − cos θ = sin θ tan θ for cos θ ≠ 0. In words, rewrite the left expression until it becomes the right expression.

Show the steps and the answer

cos θ ≠ 0

1−cos2θcosθ

sin2θcosθ=sinθtanθ

  1. Work where cosθ≠0.Both sec θ and tan θ divide by cosine; this records the original domain before any cancellation.
  2. LHS =secθ−cosθ=1cosθ−cosθ.The left side has more pieces, so start there. Reciprocal identity: sec θ = 1cosθ.
  3. =1cosθ−cos2θcosθ=1−cos2θcosθ.cos θ ≠ 0 lets you multiply cosine by cosθcosθ, which equals 1. Match the bottoms, then subtract the tops.
  4. =sin2θcosθ.Pythagorean identity: 1 − cos2θ = sin2θ.
  5. =sinθ×sinθcosθ=sinθtanθ= RHS.Split sin2θ into sin θ × sin θ, and sinθcosθ = tan θ.
Answer
The left side turns into sin θ tan θ, the right side, so the identity holds wherever both sides are defined.
Double-check At θ = 420°, the special-triangle work gives cos θ = 12, sec θ = 2, sin θ = 32 and tan θ = 3. Each side is 32. This numerical check catches errors; the algebra chain proves the identity.

The trap

Testing one angle and calling the identity proved. One angle can agree by coincidence; a proof needs algebra that works for every θ. Use a test angle only to check your algebra afterward.

Quick check

Try it before you open its steps. It is question 2 of 3 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 3

One reciprocal and a cancellation

Prove sec θ cos θ = 1 for cos θ ≠ 0. In words, replace secant with its definition.

Show the steps and the answer

cos θ ≠ 0

cosθcosθ=1

  1. LHS =1cosθ×cosθ.Secant is reciprocal cosine on this domain.
  2. =cosθcosθ=1= RHS.The denominator and cancelled factor are nonzero.
Answer
The identity holds when cos θ ≠ 0.
Double-check At 420°, 2 × 12 = 1.

2.6 Definition 2: a point on the terminal side

about 6 minOpen the full lesson

The rule

r=x2+y2>0.

sinθ=yr,cosθ=xr,tanθ=yx (x≠0), cotθ=xy (y≠0), secθ=rx (x≠0), cscθ=ry (y≠0).

How

  1. Write down x and y with their signs.
  2. Find r = x2+y2 and simplify the root. r is always positive.
  3. sin θ = yr and cos θ = xr: reduce, then rationalize.
  4. tan θ = yx and cot θ = xy: r is not involved.
  5. sec θ = rx and csc θ = ry: the flips of cos and sin.
  6. Check each sign directly: r > 0; a ratio is negative when its numerator and denominator have opposite signs. We will organize these signs by quadrant in a later lesson.

Worked example

Worked example

All six values from the point P(-6, -9)

The terminal side of an angle θ in standard position passes through the point P(-6, -9). Find the exact values of sin θ, cos θ, tan θ, cot θ, sec θ and csc θ. Simplify every square root and leave no square root in a denominator.

Show the steps and the answer
P(-6, -9)−12−6612−12−8−44812
The point P(-6, -9) and the line through the origin and P.
  1. Write the coordinates of P with their signs: x=-6,y=-9.Definition 2 works with any point (x, y) on the terminal side other than the origin. The minus signs stay attached to the numbers because they decide the signs of the answers.
  2. r=x2+y2=(-6)2+(-9)2=36+81=117=9·13=313.r is the distance from the origin to P, so it is the positive root, and squaring removes both minus signs. 9 is the largest perfect square that divides 117, so 117 = 9 · 13 = 313.
  3. sinθ=yr=-9313=-313=-313·1313=-31313. cosθ=xr=-6313=-213=-213·1313=-21313.Cancel the common factor 3 first so the numbers stay small. Then multiply by 1313, which equals 1, to clear the root from the denominator, since 13 · 13 = 13.
  4. tanθ=yx=-9-6=32 and cotθ=xy=-6-9=23.These two use only the coordinates, so r is not involved and no root appears. Both are defined because x = -6 ≠ 0 and y = -9 ≠ 0. A negative divided by a negative is positive, and the common factor 3 cancels.
  5. secθ=rx=313-6=-132 and cscθ=ry=313-9=-133.sec θ and csc θ are the flips of cos θ = -213 and sin θ = -313. With r on top, the root is already in the numerator, so after cancelling the 3 there is nothing to rationalize.
  6. Check each sign: r=313>0,x=-6<0,y=-9<0. sinθ,cosθ,secθ and cscθ each pair r with one negative coordinate, so all four are negative. tanθ and cotθ divide one negative coordinate by the other, so both are positive. The values found agree.A ratio is negative exactly when its numerator and denominator have opposite signs. r is always positive, so a ratio that uses r takes the sign of the coordinate in it.
Answer
sin θ = -31313, cos θ = -21313, tan θ = 32, cot θ = 23, sec θ = -132, csc θ = -133
Double-check Rebuild P from r: r · cos θ = 313 · (-21313) = -6·1313 = -6 = x and r · sin θ = 313 · (-31313) = -9·1313 = -9 = y. Also sin2 θ + cos2 θ = (-313)2 + (-213)2 = 913 + 413 = 1, as it must be because x2 + y2 = r2. Each flip pair multiplies to 1: (-21313) · (-132) = 2·1313·2 = 1, (-31313) · (-133) = 3·1313·3 = 1 and 32 · 23 = 1.

Work to write

  1. x = -6, y = -9
  2. r=(-6)2+(-9)2=117=313
  3. sinθ=-9313=-31313
  4. cosθ=-6313=-21313
  5. tanθ=-9-6=32
  6. cot θ = -6-9 = 23
  7. sec θ = 313-6 = -132
  8. csc θ = 313-9 = -133
  9. x < 0 and y < 0 with r > 0: sin, cos, sec, csc negative; tan, cot positive

The trap

Giving r a sign. r is a distance, so it is positive even when x and y are negative. Every minus sign in the answers comes from x or y, never from r.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

A large point and a small equivalent point

P(9, −12) is on a terminal side. Find all six functions. In words, find the distance and reduce ratios without dropping the negative y.

Show the steps and the answer
xyθx = 4.5y = −6rP(4.5, −6)Ox = 4.5 (4.5 right) y = −6 (6 down) r = √56.25 ≈ 7.5the ray from O through P (and beyond) = the terminal side
Half of (9, −12) fits the drawing and keeps the same ray.
  1. r=81+144=225=15.Squares erase the coordinate signs; distance uses the positive root.
  2. sin=−1215=−45,cos=915=35,tan=−129=−43.Use yr, xr and yx and divide common factors.
  3. cot=−34,sec=53,csc=−54.Use xy, rx and ry with the original signs.
Answer
  • sin=−45
  • cos=35
  • tan=−43
  • cot = −34
  • sec = 53
  • csc = −54
Double-check Divide both coordinates by 3 to obtain (3, −4), whose distance is 5; its six ratios match.

2.7 Quadrantal angles and undefined values

about 3 minOpen the full lesson

The rule

sinθ=y and cosθ=x at the axis points with r=1.

tanθ and secθ are undefined at θ=90°+n·180°; cotθ and cscθ are undefined at θ=n·180°, where n is any integer (positive, negative or zero). In radians these are π2+nπ and nπ.

How

  1. If this is a quadrantal angle, add or subtract full turns until 0° ≤ θ < 360°; in radians use turns of 2π.
  2. Match its terminal side to (1, 0), (0, 1), (−1, 0) or (0, −1).
  3. Read sin θ = y and cos θ = x.
  4. Write tan = yx, cot = xy, sec = 1x and csc = 1y.
  5. Inspect every denominator first. A zero denominator gives undefined; otherwise do the division.

Worked example

Worked example

Axis values after clockwise turns

Find all six functions at −540° and −450°. In words, remove complete turns, find the axis point, then read the six ratios.

Show the steps and the answer
x = cos θy = sin θ(0, −1)
The point (0, −1) on the unit circle at −450°.
x = cos θy = sin θ(0, −1)
The same picture again: The point (0, −1) on the unit circle at −450°.
−540°
One and a half clockwise turns ends on the negative x-axis.
−450°
One and a quarter clockwise turns ends on the negative y-axis.
input θoutput point0° (0)(1, 0)90° (π/2)(0, 1)180° (π)(−1, 0)270° (3π/2)(0, −1)360° (2π)(1, 0)
Reference table: read the point entry directly under its θ label.
input θoutput sin θ0° (0)090° (π/2)1180° (π)0270° (3π/2)−1360° (2π)0
Reference table: read the sin θ entry directly under its θ label.
input θoutput cos θ0° (0)190° (π/2)0180° (π)−1270° (3π/2)0360° (2π)1
Reference table: read the cos θ entry directly under its θ label.
input θoutput tan θ0° (0)090° (π/2)undefined180° (π)0270° (3π/2)undefined360° (2π)0
Reference table: read the tan θ entry directly under its θ label.
input θoutput cot θ0° (0)undefined90° (π/2)0180° (π)undefined270° (3π/2)0360° (2π)undefined
Reference table: read the cot θ entry directly under its θ label.
input θoutput sec θ0° (0)190° (π/2)undefined180° (π)−1270° (3π/2)undefined360° (2π)1
Reference table: read the sec θ entry directly under its θ label.
input θoutput csc θ0° (0)undefined90° (π/2)1180° (π)undefined270° (3π/2)−1360° (2π)undefined
Reference table: read the csc θ entry directly under its θ label.
input θoutput cos θ0°130°(√3)/245°(√2)/260°1/290°0
The cosine reference columns reverse the sine values.
  1. −540°+2×360°=180°, so use (−1,0), with r=1.Adding full turns preserves the terminal side.
  2. sin(−540°)=01=0; cos(−540°)=−11=−1; tan(−540°)=0−1=0.Substitute y, x and r in the coordinate definitions.
  3. cot(−540°) is undefined; sec(−540°)=−1; csc(−540°) is undefined.Cotangent and cosecant divide by y = 0. Secant is 1−1.
  4. −450°+2×360°=270°, so use (0,−1), with r=1.The terminal side points down after the full turns are removed.
  5. sin(−450°)=−1; cos(−450°)=0; cot(−450°)=0−1=0; csc(−450°)=−1.Read the coordinates and substitute in the ratios.
  6. tan(−450°) and sec(−450°) are undefined.Their denominator x is 0.
Answer
  • At −540°:
  • sin = 0
  • cos=−1
  • tan = 0
  • cot = undefined
  • sec = −1
  • csc = undefined
  • At −450°:
  • sin=−1
  • cos = 0
  • tan = undefined
  • cot = 0
  • sec = undefined
  • csc = −1
Double-check At both points x2 + y2 = 1. A zero numerator over −1 gives zero; a zero denominator gives no value.

The trap

Writing 0 when the answer is undefined, or the reverse. 01 = 0 is a real value; 10 has no value. Look at which coordinate sits on the bottom before you answer.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

A negative axis angle

Find tan(−270°) and cot(−270°). In words, identify which fraction has a zero bottom.

Show the steps and the answer
−270°
The negative rotation ends on the positive y-axis.
  1. −270°+360°=90°, so P=(0,1).A clockwise three-quarter turn ends where a counterclockwise quarter turn ends.
  2. tan(−270°)=10 is undefined; cot(−270°)=01=0.Tangent divides by x; cotangent divides by y.
Answer
  • tan(−270°) = undefined
  • cot(−270°) = 0
Double-check The ray points up, so x is zero and y is not.

2.8 Signs by quadrant: find the quadrant first

about 3 minOpen the full lesson

The rule

Inside Quadrants I, II, III, IV, the positive functions are respectively: all six; sin and csc; tan and cot; cos and sec.

Every remaining function is negative.sin2θ+cos2θ=1 gives the missing magnitude. The quadrant chooses the sign of sinθ or cosθ in front of its nonnegative square root.

How

  1. For each clue, list every quadrant where it is true. A zero value points to an axis instead.
  2. Keep only the quadrants shared by every clue. If more than one remains, report that the information does not determine one quadrant.
  3. Use sin2θ + cos2θ = 1 to isolate the square of the missing partner.
  4. Take the nonnegative square root for its magnitude, then attach the sign required by the quadrant.
  5. Compute tan = sinθcosθ, cot = cosθsinθ, sec = 1cosθ and csc = 1sinθ, checking denominators.
  6. Check the squared identity and every sign against the clues.

Worked example

Worked example

Use two sign clues before taking a root

sin θ = 27 and tan θ < 0. Find the other five functions. In words, decide where the terminal side is, then recover the missing ratios.

Show the steps and the answer
x = cos θy = sin θ(−(3√5)/7, 2/7)
The point (−(35)/7, 2/7) on the unit circle at 163.399°.
x = cos θy = sin θ(−(3√5)/7, 2/7)
The same picture again: The point (−(35)/7, 2/7) on the unit circle at 163.399°.
input quadrantoutput xI+II−III−IV+
Reference table: read the x entry directly under its quadrant label.
input quadrantoutput yI+II+III−IV−
Reference table: read the y entry directly under its quadrant label.
input quadrantoutput sin θ and csc θI+II+III−IV−
Reference table: read the sin θ and csc θ entry directly under its quadrant label.
input quadrantoutput cos θ and sec θI+II−III−IV+
Reference table: read the cos θ and sec θ entry directly under its quadrant label.
input quadrantoutput tan θ and cot θI+II−III+IV−
Reference table: read the tan θ and cot θ entry directly under its quadrant label.
  1. sinθ>0 allows I or II; tanθ<0 allows II or IV. Their common quadrant is II.Only Quadrant II satisfies both sign clues, so cosine must be negative.
  2. cos2θ=1−(27)2=4949−449=4549.This isolates the square of the unknown cosine.
  3. cosθ=−4549=−357.45 = 35; choose the negative root for Quadrant II.
  4. tanθ=27÷(−357)=−235=−2515.The 7s cancel; multiply top and bottom by 5.
  5. cotθ=−352; secθ=−735=−7515; cscθ=72.Take reciprocals of nonzero tangent, cosine and sine.
Answer
  • Quadrant II
  • cosθ=−357
  • tanθ=−2515
  • cot θ = −352
  • sec θ = −7515
  • csc θ = 72
Double-check sin2θ + cos2θ = 449 + 4549 = 1. Only sine and cosecant are positive, as required in Quadrant II.

The trap

Taking the positive square root out of habit. The principal square root, written a, is nonnegative, including 0 = 0. A missing sine or cosine can still be negative: choose its sign from the quadrant. When a sign clue leaves two possible quadrants, keep both instead of guessing.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

A missing partner with whole-number roots

sin β = −45 and tan β > 0. Find cos β and tan β. In words, choose the quadrant and recover cosine.

Show the steps and the answer
x = cos θy = sin θ(−3/5, −4/5)
The negative sine and positive tangent place the point in III.
  1. Negative sine allows III or IV; positive tangent allows I or III. Choose III.III is their only overlap, so cosine is negative.
  2. cos2β=1−1625=925, so cosβ=−35.The squared identity gives magnitude 35, and III gives the sign.
  3. tanβ=(−45)÷(−35)=43.Equal bottoms cancel; two negative signs give a positive quotient.
Answer
  • Quadrant III
  • cosβ=−35
  • tanβ=43
Double-check 1625 + 925 = 1, and the positive tangent matches its clue.

2.9 Definition 3: the unit circle

about 8 minOpen the full lesson

The rule

x2+y2=1 and P(t)=(cost,sint).

tant=yx and sect=1x require x≠0; cott=xy and csct=1y require y≠0.P(t±π)=(−x,−y); P(−t)=(x,−y); P(t+2nπ)=(x,y), where n is any integer.

How

  1. For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.
  2. Read x and y from the Terminal point P(t), and check x2 + y2 = 1 if a point is supplied.
  3. Write cos t = x and sin t = y.
  4. Use tan = yx, cot = xy, sec = 1x and csc = 1y, checking each denominator.
  5. For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.
  6. For several moves, apply them one at a time and check the resulting quadrant.

Worked example

Worked example

Clockwise travel to t = −19π6: terminal point by symmetry and the six functions

A point starts at (1, 0) on the unit circle x2 + y2 = 1 and travels clockwise a distance of 19π6, so it marks the real number t = −19π6. You may use P(π6) = (32, 12). Describe where the travel ends. Then find the terminal point P(t) by applying the symmetry rules one move at a time, name its quadrant and confirm that it lies on the unit circle. Finally, find the exact values of sin t, cos t, tan t, cot t, sec t and csc t, rationalizing every denominator.

Show the steps and the answer
x = cos θy = sin θP
Unit circle showing the terminal point P of t = −19π6 at (−32, 12) in Quadrant II.
  1. Locate the end of the travel. Split the distance: 19π6=2π+π+π6. Going clockwise from (1, 0), the 2π is one full turn back to (1, 0). The π is a half turn to (−1,0). The last π6 carries the point on from (−1,0) toward (0, 1), so P(t) is in Quadrant II.t is negative, so the point travels clockwise a distance |t| = 19π6. Clockwise motion passes (1, 0), (0, −1), (−1, 0) and (0, 1) in that order, so a point just past (−1, 0) is in Quadrant II.
  2. Write t as moves applied to π6: t=−π6−π−2π.−π6 − 6π6 − 12π6 = −19π6. Each move (change the sign, subtract π, subtract 2π) has a known effect on the coordinates of P(π6).
  3. Move 1: P(−π6)=(32,−12), in Quadrant IV.P(−t) = (x, −y): changing the sign of t flips only the y-coordinate of P(π6) = (32, 12).
  4. Move 2: P(−π6−π)=(−32,12), in Quadrant II.P(t − π) = (−x, −y): subtracting π is a half turn, which flips both signs of (32, −12).
  5. Move 3: P(−π6−π−2π)=(−32,12), still in Quadrant II. So P(−19π6)=(−32,12).P(t + 2nπ) = (x, y) with n = −1: a full turn keeps both coordinates. Quadrant II agrees with the travel in the first step.
  6. Check the point: (−32)2+(12)2=34+14=1.Every terminal point lies on x2 + y2 = 1. Sign flips do not change x2 or y2, so this also confirms the supplied point P(π6).
  7. Read x=−32 and y=12. Write cost=−32 and sint=12.The unit-circle definition is P(t) = (cos t, sin t). Cosine is the x-coordinate and sine is the y-coordinate.
  8. Check the denominators: x=−32≠0 and y=12≠0.tan t and sec t divide by x, and cot t and csc t divide by y. Both are nonzero, so all four functions are defined here.
  9. tant=yx=12·(−23)=−13=−33, and cott=xy=(−32)·2=−3.Dividing by a fraction is the same as multiplying by its reciprocal. Multiplying the top and bottom of −13 by 3 removes the root from the denominator.
  10. sect=1x=−23=−233, and csct=1y=2.The reciprocal of −32 is −23, which is rationalized by multiplying top and bottom by 3. The reciprocal of 12 is 2.
Answer
P(−19π6) = (−32, 12), in Quadrant II. sin t = 12, cos t = −32, tan t = −33, cot t = −3, sec t = −233, csc t = 2.
Double-check Add two full turns (n = 2): t + 4π = −19π6 + 24π6 = 5π6. This lies between π2 and π, so P(t) = P(5π6) is in Quadrant II with x < 0 and y > 0, as found. The signs fit Quadrant II: sin t and csc t are positive, and cos t, tan t, cot t and sec t are negative. Each reciprocal pair multiplies to 1: (12)(2) = 1, (−32)(−233) = 66 = 1 and (−33)(−3) = 33 = 1.

Work to write

  1. 19π6 = 2π + π + π6 clockwise from (1, 0), ending in Quadrant II
  2. t=−π6−π−2π
  3. P(−π6)=(32,−12)
  4. P(−π6−π)=(−32,12)
  5. P(−19π6) = (−32, 12), Quadrant II
  6. (−32)2+(12)2=34+14=1
  7. cost=−32,sint=12
  8. tan t = −33, cot t = −3
  9. sec t = −233, csc t = 2

The trap

Swapping x and y. The point is P(t) = (cos t, sin t): cosine comes first, as x does. Alphabetical order helps: c before s, x before y.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Six values from a new point

P(u) = (817, 1517). Find all six functions. In words, check the unit point, read its coordinates and form four ratios.

Show the steps and the answer
x = cos θy = sin θ(8/17, 15/17)
The higher y-coordinate gives the larger sine.
  1. 64289+225289=289289=1.The squared coordinates confirm radius 1.
  2. sinu=1517 and cosu=817.Read y and x respectively.
  3. tanu=158,cotu=815,secu=178,cscu=1715.The shared 17s cancel in quotients; dividing 1 by a nonzero fraction flips it.
Answer
  • sinu=1517
  • cosu=817
  • tanu=158
  • cot u = 815
  • sec u = 178
  • csc u = 1715
Double-check Every value is positive in I; sec u × cos u = 178 × 817 = 1.

2.10 Calculator values: DEG or RAD mode

Open the full lesson

The rule

Use DEG for degrees and RAD for radians.

Here an angle with no unit means radians.secθ=1cosθ requires cosθ≠0; cscθ=1sinθ and cotθ=cosθsinθ require sinθ≠0. Round only the final value, retaining requested trailing zeros.

How

  1. Read the angle unit from the degree sign or words. If none is written, this course means radians.
  2. Set DEG or RAD before entering the angle, and use parentheses around an entire fraction, negative angle or multiple of π.
  3. Use the function key if available. Otherwise compute sec = 1 ÷ cos, csc = 1 ÷ sin, cot = cos ÷ sin, all with the same angle and mode.
  4. Check whether an exact axis input makes the needed denominator zero. If it does, write undefined rather than trusting a very large calculator display.
  5. Keep the unrounded value in calculator memory while doing reciprocals or other arithmetic.
  6. For p decimal places, inspect digit p + 1: 0 through 4 leaves digit p unchanged; 5 through 9 rounds the magnitude up. Restore the sign and keep exactly p places.

Worked example

Worked example

Five original calculator approximations

Round to four decimal places: (a) sin 52°, (b) sin 52, (c) cos(−7π6), (d) tan 1.3, (e) sec 67°. In words, identify the angle unit before computing each decimal.

Show the steps and the answer

52°: DEG

52: RAD

sec 67° = 1 ÷ cos 67°

Round the final value.

52°: DEG

52: RAD

sec 67° = 1 ÷ cos 67°

Round the final value.

input keys typedoutput DEG modesin 300.5sin 150.25882cos 300.86603
Reference table: read the DEG mode entry directly under its keys typed label.
input keys typedoutput RAD modesin 30−0.98803sin 150.65029cos 300.15425
Reference table: read the RAD mode entry directly under its keys typed label.
  1. (a) DEG mode: sin52°≈0.7880107536, so 0.7880.The degree sign selects DEG; the fifth decimal is 1.
  2. (b) RAD mode: sin52≈0.9866275920, so 0.9866.No unit means radians; the fifth decimal is 2.
  3. (c) RAD mode: cos(−7π6)≈−0.8660254038, so −0.8660.Enter the entire angle in parentheses; the fifth decimal is 2.
  4. (d) RAD mode: tan1.3≈3.6021024480, so 3.6021.The fifth decimal is 0; preserve four digits after the decimal point.
  5. (e) DEG mode: sec67°=1÷cos67°≈2.5593046652, so 2.5593.If there is no secant key, use 1 ÷ cos 67°. Keep cosine's stored precision until the final rounding.
Answer
  • (a) 0.7880
  • (b) 0.9866
  • (c)−0.8660
  • (d) 3.6021
  • (e) 2.5593
Double-check The sine and cosine outputs lie between −1 and 1. Secant has size at least 1, and multiplying the unrounded result in (e) by cos 67° returns 1.

The trap

Leaving the calculator in the wrong mode. Before any calculator question, look for a degree sign and set the mode. Quick test: sin 30 should show 0.5 in DEG mode.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

A negative radian angle with π

Find cos(−7π6) to four decimals. In words, enter the whole negative radian angle and round its cosine.

Show the steps and the answer
−7π/6
The negative rotation ends in Quadrant II, where cosine is negative.
  1. Set RAD and enter cos(−7π÷6), with the entire angle inside parentheses.The input is radians and the minus sign belongs to the whole angle.
  2. The result is approximately −0.8660254038, which rounds to −0.8660.The fifth decimal is 2; retain four places and the minus sign.
Answer
cos(−7π6)≈−0.8660
Double-check −7π6 is −210°, coterminal with 150°. Since 150° = 180° − 30°, reflect the 30° point across the x-axis, then take a half turn. Reflection keeps its cosine 32; the half turn negates it to −32. This agrees with the negative decimal.

3 Properties of the trigonometric functions

about 30 min10 lessonsOpen the unit's crash course

3.1 Sine and cosine: every input works, and the output stays between −1 and 1

about 2 minOpen the full lesson

The rule

For sin t and cos t: domain (−∞,∞), all real numbers; range [−1,1].

Thus −1≤sint≤1 and −1≤cost≤1. Absolute value |a| means a number's distance from 0, so the notes' |sint|≤1 and |cost|≤1 say the same thing.

How

  1. 1. Read the question: is it about an input t (domain) or about an output value (range)?
  2. 2. Domain of sin or cos: the answer is always yes, for any number in degrees or radians, positive or negative.
  3. 3. Range of sin or cos: check whether the value is between −1 and 1, endpoints included. If it is, yes; if it is bigger than 1 or smaller than −1, no.
  4. 4. Unmask disguised numbers before comparing: π ≈ 3.14 and 32 = 1.5 are outside, while 32 ≈ 0.87 is inside.
  5. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

Domain and range questions for sine and cosine

The question asks whether each proposed input or output is allowed. Answer yes or no. (a) Is t = 1265 in the domain of cos t? (b) Is −0.6 in the range of sin t? (c) Is 32 in the range of cos t? (d) Is 1 in the range of sin t?

Show the steps and the answer
x = cos θy = sin θ(0.8, −0.6)
The point (0.8, −0.6) shows that the proposed sine output −0.6 is possible.
−1−0.613/2
−0.6 and 1 belong to [−1, 1], while 1.5 lies outside it.
  1. (a) Yes. cos 1265 means: walk 1265 units around the unit circle and read the x-coordinate of the stopping point.The walk always ends somewhere, so the domain of cosine is all real numbers.
  2. (b) Yes. −0.6 is between −1 and 1.The range of sine is [−1, 1].
  3. (c) No. 32=1.5, which is bigger than 1.No point of the unit circle is 1.5 units to the right of the center; the rim is only 1 unit away.
  4. (d) Yes. At the top of the circle P=(0,1), so sin90°=1.1 is an endpoint, and the bracket in [−1, 1] includes it.
Answer
  • (a) yes
  • (b) yes
  • (c) no
  • (d) yes
Double-check For (b), find an actual point with height −0.6: (0.8, −0.6) is on the unit circle because 0.82 + (−0.6)2 = 0.64 + 0.36 = 1.

The trap

Mixing up the two questions. The domain is about the input t, and every t is allowed for sine and cosine. The range is about the output, which must be between −1 and 1. The input t = 5 is fine for sine; the output 5 is impossible.

3.2 Quadrantal angles: where tan, cot, sec and csc break

about 3 minOpen the full lesson

The rule

tan t and sec t: t≠π2+nπ, or t≠90°+n·180°.

cot t and csc t: t≠nπ, or t≠n·180°. An integer is a number such as −2,−1, 0, 1 or 2; n may be any integer. The notes write the same exclusions as π2±nπ and ±nπ. Every other real input is allowed.

How

  1. 1. If the angle is negative or at least a full turn, add or subtract full turns (2π or 360°) to bring it between 0 and 2π.
  2. 2. Check whether it is a quarter-turn mark: 0 gives (1, 0), π2 (90°) gives (0, 1), π (180°) gives (−1, 0), 3π2 (270°) gives (0, −1). If it is none of these, all six functions are defined.
  3. 3. On the y-axis (x = 0): tan and sec are undefined, while cot and csc have values.
  4. 4. On the x-axis (y = 0): cot and csc are undefined, while tan and sec have values. In a table, write 'undefined' or 'n/a', as the notes do.
  5. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

Which functions are undefined?

The question asks which division formulas have a zero denominator at each angle. Which of tan t, cot t, sec t and csc t are undefined at (a) t = 3π and (b) t = −90°?

Show the steps and the answer
x = cos θy = sin θP(cos t, sin t)
At 3π, the terminal point is (−1, 0), so formulas dividing by y fail.
x = cos θy = sin θP(cos t, sin t)
At −90°, the terminal point is (0, −1), so formulas dividing by x fail.
  1. (a) 3π is more than 2π, so subtract one full turn: 3π−2π=π.A full turn lands on the same point, so 3π and π share their point.
  2. The point for π is (−1,0): x=−1 and y=0.Half a turn from (1, 0) reaches the far left of the circle.
  3. y=0 is on the bottom of cott=xy and csct=1y, so those two are undefined. The other two have values: tan3π=0−1=0 and sec3π=1−1=−1.Only a 0 on the bottom breaks a fraction; a 0 on top gives the value 0.
  4. (b) −90° is a quarter turn clockwise, ending at the bottom of the circle, (0,−1): x=0 and y=−1.Negative angles turn clockwise, and a quarter turn is 90°.
  5. x=0 is on the bottom of tant=yx and sect=1x, so those two are undefined. cot(−90°)=0−1=0 and csc(−90°)=1−1=−1.Same rule: a 0 on the bottom means undefined.
Answer
  • (a) cot 3π and csc 3π are undefined.
  • (b) tan(−90°) and sec(−90°) are undefined.
Double-check Use the excluded lists: 3π = nπ with n = 3, which is excluded for cot and csc; −90° = 90° + n·180° with n = −1, which is excluded for tan and sec.

The trap

Calling a 0 on top 'undefined'. 0−1 = 0 is an ordinary value. Only a 0 on the bottom breaks a function, so tan π = 0 is defined while cot π is undefined.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Which of tan, cot, sec and csc break at t = 11π2?

Let t = 11π2. Find tan t, cot t, sec t and csc t. Write 'undefined' for any function with no value at this input.

Show the steps and the answer
x = cos θy = sin θP
The angle 11π2 ends at the same place as 270°, at P(0, −1) on the negative y-axis.
  1. Bring the angle into one turn: 11π2−2π−2π=11π2−8π2=3π2. In degrees, 990°−720°=270°.11π2 is at least a full turn. Adding or subtracting whole turns of 2π does not change the point on the unit circle.
  2. Recognise 3π2 (270°) as a quarter-turn mark. Its point on the unit circle is (0,−1), so x=cost=0 and y=sint=−1.The quarter-turn marks are 0 → (1, 0), π2 → (0, 1), π → (−1, 0) and 3π2 → (0, −1).
  3. tant=yx=−10, which is undefined. sect=1x=10, which is also undefined.The point lies on the y-axis, where x = 0. Tan and sec both divide by x, and a zero on the bottom is a break.
  4. cott=xy=0−1=0. csct=1y=1−1=−1.Cot and csc divide by y = −1, which is not zero. A zero on top only makes the value 0.
Answer
tan 11π2 is undefined, sec 11π2 is undefined, cot 11π2 = 0 and csc 11π2 = −1.
Double-check Use the rule. Tan and sec exclude t = π2 + nπ, and 11π2 = π2 + 5π with n = 5, so both are excluded. Cot and csc exclude t = nπ, but 11π2 = 5.5π and 5.5 is not an integer, so both are defined. This agrees with the answer.

Work to write

  1. 11π2 − 4π = 3π2, which is coterminal with 270°
  2. Point on the unit circle: (0, −1), so x = 0 and y = −1
  3. tan t = −10, so it is undefined
  4. sec t = 10, so it is undefined
  5. cot t = 0−1 = 0
  6. csc t = 1−1 = −1

3.3 The range of tan, cot, sec and csc

about 3 minOpen the full lesson

The rule

tan t and cot t have range (−∞,∞).

sec t and csc t have range (−∞,−1]∪[1,∞), meaning an output ≤−1 or ≥1. To test a proposed secant or cosecant output v, first require v≠0, then check that 1v belongs to [−1,1].

How

  1. 1. For a tangent or cotangent range question, answer yes for every real output.
  2. 2. For secant or cosecant, first reject 0 because its reciprocal is undefined.
  3. 3. For any other proposed output, ignore its sign and check its distance from 0.
  4. 4. A size of at least 1 is allowed. A size less than 1 is impossible.
  5. 5. To verify the decision, flip a nonzero proposed output. It must become an allowed sine or cosine between −1 and 1.
  6. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

Range questions for the other four

The question asks whether each proposed output can occur. Answer yes or no. (a) Is 0.5 in the range of sec t? (b) Is −3 in the range of csc t? (c) Is 250 in the range of tan t? (d) Is −1 in the range of csc t?

Show the steps and the answer
−11(−∞, −1] ∪ [1, ∞)
The same picture a third time: (−∞, −1] and [1, ∞) on a number line.

sec t = 0.5 would require cos t = 2

csc t = −3 requires sin t = −13

csc t = −1 occurs at sin t = −1

  1. (a) No. If sect=0.5, then cost=1÷0.5=2, and no point of the unit circle has x=2.sec t and cos t are reciprocals, and cos t can never be bigger than 1.
  2. (b) Yes. If csct=−3, then sint=−13, which is between −1 and 1, so such a t exists.Flip the value back to a sine and check that it is an allowed sine.
  3. (c) Yes. Tangent takes every real value.As the point approaches the top through Quadrant I, x approaches 0 through positive values while y approaches 1. The positive ratio y ÷ x therefore exceeds any fixed positive number; the point construction also supplies 250 exactly.
  4. (d) Yes. csct=−1 when sint=−1, which happens at t=3π2 (270°).−1 is an endpoint, and the bracket in (−∞, −1] includes it.
Answer
  • (a) no
  • (b) yes
  • (c) yes
  • (d) yes
Double-check For a nonzero secant or cosecant output, its reciprocal must be in [−1, 1]: 1 ÷ 0.5 = 2 fails; 1 ÷ (−3) = −13 passes; 1 ÷ (−1) = −1 passes. The proposed output 0 always fails before this test, because 1 ÷ 0 is undefined.

The trap

Writing the range of sec t or csc t as [−1, 1]. That is the range of their partners cos t and sin t. Flipping pushes every value outside: (−∞, −1] ∪ [1, ∞).

3.4 Periodic functions: the values repeat every lap

about 4 minOpen the full lesson

The rule

A positive repeat k preserves the domain in both directions and satisfies f(t+k)=f(t) wherever defined.

A function with such a repeat is periodic. If there is a smallest positive repeat, it is the period. For any integer n: sin(t±2nπ)=sint, and the same for cos, sec and csc; tan(t±nπ)=tant, and the same for cot. Degree repeats are 360° and 180°, respectively. In degrees, sint=sin(t±n·360°), with integer n; likewise cos, sec and csc.

How

  1. 1. Identify the requested function and its period: 2π (360°) for sin, cos, sec and csc; π (180°) for tan and cot.
  2. 2. Add whole periods to a negative angle, or subtract them from an angle at least one period, until 0 ≤ reduced angle < period.
  3. 3. Use a known special or axis value if the reduced angle is one you know. Other angles may permit a sign decision without a familiar exact value.
  4. 4. The original expression has exactly the same output, sign included. If the reduced expression is undefined, the original one is also undefined.
  5. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

Reducing a negative radian angle and a large degree angle by whole periods

Find the exact value of each expression without a calculator. (a) sin(−17π6) (b) tan(1110°)

Show the steps and the answer
30°1110°same terminal side
The angles 30° and 1110° share a terminal side, because 1110° = 30° + 3·360°. So tan(1110°) = tan 30° = 3/3.
  1. (a) The function is sine, so the period is 2π=12π6.sin(t ± 2nπ) = sin t for every integer n, and 2π is the smallest positive repeat of sine.
  2. (a) The angle is negative, so add whole periods. Add 2π once: −17π6+12π6=−5π6. This is still negative, so add 2π again: −5π6+12π6=7π6. Now 0≤7π6<2π.Adding two whole periods (n = 2) moves the angle into the interval from 0 to one period without changing the sine value.
  3. (a)sin(7π6)=−12.7π6 is the special angle π6 past π, in Quadrant III. There sine is negative and the reference value is sin(π6) = 12.
  4. (a) So sin(−17π6)=sin(7π6)=−12.The original expression has exactly the same output as the reduced one, sign included.
  5. (b) The function is tangent, so the period is 180°.tan(t ± n·180°) = tan t for every integer n. Tangent repeats every half lap, not every full lap.
  6. (b) The angle is at least one period, so subtract whole periods. 1110°÷180° is 6 with remainder 30°, so subtract 6 periods: 1110°−6·180°=1110°−1080°=30°. Now 0°≤30°<180°.Subtracting six whole periods (n = 6) gives the reduced angle in the interval from 0° up to one period.
  7. (b)tan(30°)=13=33, so tan(1110°)=33.30° is a special angle with tan 30° = sin30°cos30° = 1/23/2. The original expression has the same value and the same sign.
Answer
(a)sin(−17π6)=−12(b)tan(1110°)=33
Double-check (a) Convert to degrees: −17π6 = −510°. Adding 2·360° gives −510° + 720° = 210°, which is in Quadrant III, and sin 210° = −12. This matches. (b) Using full laps instead: 1110° − 3·360° = 30°, so 1110° is coterminal with 30° and tan(1110°) = tan 30° = 33. This agrees with the half-lap reduction.

Work to write

  1. sine has period 2π; tangent has period 180°
  2. −17π6+2·2π=7π6
  3. sin(−17π6)=sin(7π6)=−12
  4. 1110°−6·180°=30°
  5. tan(1110°)=tan30°=33

The trap

Removing a single π from a sine, cosine, secant or cosecant angle. Half a lap flips their sign: sin(t + π) = −sin t, so sin 210° is −12, not sin 30° = 12. Only tangent and cotangent may drop π at a time; the others must drop 2π (360°).

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

Reduce a fractional radian angle

The question asks for sine after removing whole laps in radians. Find sin 37π6.

Show the steps and the answer
30°1110°same terminal side
1110° is 37π6, three full turns beyond 30°.
  1. Three full laps are 6π=36π6.Sine's period is 2π, so three periods equal 6π.
  2. 37π6−36π6=π6.The denominator 6 means the pieces match.
  3. sin37π6=sinπ6=12.π6 is the 30° special angle.
Answer
sin37π6=12.
Double-check The difference 6π is three full turns, so the terminal point agrees.

3.5 Signs of the six functions in the four quadrants

about 4 minOpen the full lesson

The rule

Inside a quadrant: I has all six positive.

II has sin and csc positive. III has tan and cot positive. IV has cos and sec positive. Each unlisted function is negative. Axis points need their actual coordinates, because a value may be 0 or undefined.

How

  1. 1. If the question gives a quadrant, locate that region in the picture and write its x and y signs: I (+, +), II (−, +), III (−, −), IV (+, −).
  2. 2. Use sin t = y and cos t = x. A positive sign means an output greater than 0; a negative sign means an output less than 0.
  3. 3. Give csc the sign of sin, and sec the sign of cos. A reciprocal of a nonzero number keeps that number's sign.
  4. 4. Give tan and cot a positive sign when the x and y signs match, and a negative sign when they differ.
  5. 5. If the question gives signs and asks for location, list every quadrant and axis allowed by each condition, then keep their shared locations. For example, cosine positive allows I, IV and the positive x-axis; sine positive allows I, II and the positive y-axis. Do not drop an axis candidate until another condition excludes it.
  6. 6. If a condition says a value is 0 or undefined, check the four axis points before using the quadrant rows. For example, cos t = 0 means x = 0, so the point lies on the y-axis.
  7. 7. Memory device: All Students Take Calculus. In quadrant order, All, Sine, Tangent and Cosine are positive, each named function together with its reciprocal. This cue applies inside quadrants.
  8. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

Finding where a terminal point lies from two sign conditions

The terminal point (x, y) of an angle t lies on the unit circle. For each part, find every quadrant or axis direction where the point can lie. (a) csc t > 0 and cot t < 0. (b) sec t < 0 and tan t ≥ 0.

Show the steps and the answer
  1. (a) Rewrite the first condition. csct=1y, so csc t > 0 means y > 0. That is the same as sin t > 0.csc is the reciprocal of sin, and a reciprocal of a nonzero number keeps that number's sign. csc t is defined only when y ≠ 0.
  2. List the locations where y > 0: quadrant I, quadrant II and the positive y-axis.Sine is positive above the x-axis. The positive y-axis has y = 1 > 0, so it stays a candidate for now.
  3. Rewrite the second condition. cott=xy<0. This requires y≠0, and x and y must have different signs. That allows quadrant II (−,+) and quadrant IV (+,−).A quotient is negative when its two signs differ. Cot is undefined on the x-axis, where y = 0.
  4. Test the axis candidate. At the positive y-axis, (0, 1), cott=01=0. Zero is not negative, so cot t < 0 excludes this point.An axis candidate is dropped only when one of the conditions rules it out. Here the actual coordinates do that.
  5. Keep the shared locations. {I, II, positive y-axis} and {II, IV} have only quadrant II in common.The point must satisfy both conditions at once.
  6. (b) Rewrite sect=1x<0 as x < 0, which is cos t < 0. List the locations: quadrant II, quadrant III and the negative x-axis.sec has the sign of cos. Cosine is negative to the left of the y-axis. The negative x-axis has x = −1, so it is a candidate.
  7. Rewrite tant=yx≥0. This allows matching signs, which is quadrants I and III. It also allows tant=0, which happens when y=0 and x≠0. That adds the positive x-axis and the negative x-axis.The condition includes 0. Step 6 says to check the axis points whenever a value may be 0. On the y-axis, x = 0, so tan t is undefined there.
  8. Keep the shared locations. {II, III, negative x-axis} and {I, III, positive x-axis, negative x-axis} have quadrant III and the negative x-axis in common.At (−1, 0): sec t = −1 < 0 and tan t = 0 ≥ 0. Both conditions hold, so this axis direction stays in the answer.
Answer
(a) Quadrant II only. (b) Quadrant III or the negative x-axis.
Double-check (a) Take t = 150°, where (x, y) = (−32, 12). Then csc t = 2 > 0 and cot t = −3 < 0. Both conditions hold. (b) Take t = 225°, where (x, y) = (−22, −22). Then sec t = −2 < 0 and tan t = 1 ≥ 0. Also take t = 180°, where (x, y) = (−1, 0). Then sec t = −1 < 0 and tan t = 0 ≥ 0. All Students Take Calculus agrees inside the quadrants: only sin and csc are positive in II, and only tan and cot are positive in III.

Work to write

  1. csc t > 0 ⇒ y > 0: I, II, positive y-axis
  2. cot t < 0: II, IV (cot = 0 on the positive y-axis, so that axis is excluded)
  3. (a) Quadrant II
  4. sec t < 0 ⇒ x < 0: II, III, negative x-axis
  5. tan t ≥ 0: I, III, positive x-axis, negative x-axis
  6. (b) Quadrant III or the negative x-axis

The trap

A reciprocal keeps its partner's sign. csc follows sin, sec follows cos, and cot follows tan wherever both exist. Remember that the All Students Take Calculus cue excludes axis points.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

Translate reciprocal signs

sec θ > 0 and csc θ < 0. Find the quadrant. First translate the flipped values into coordinate signs.

Show the steps and the answer
x = cos θy = sin θright and below
The two reciprocal conditions select IV.
  1. Both secant and cosecant have defined nonzero values, so their coordinate denominators x and y are nonzero. This excludes all axis points.An axis would make one of these reciprocal functions undefined.
  2. secθ>0 gives cosθ>0 and x > 0, so the candidates are I and IV.A reciprocal keeps its nonzero partner's sign.
  3. cscθ<0 gives sinθ<0 and y < 0, so the candidates are III and IV.The same reciprocal sign rule applies to cosecant.
  4. Only IV appears in both lists.The terminal point must be right and below at once.
Answer
Quadrant IV.
Double-check In IV, x > 0 makes sec positive and y < 0 makes csc negative.

3.6 Which quadrant is the angle in?

about 5 minOpen the full lesson

The rule

I: 0<t<π2.

II: π2<t<π. III: π<t<3π2. IV: 3π2<t<2π. Reduce to 0≤t<2π, or 0°≤θ<360°. A multiple of π2 or 90° lies on an axis, not in a quadrant.

How

  1. 1. Read the unit. A degree sign means degrees; without a degree sign the input is in radians.
  2. 2. If the angle is negative, add 360° or 2π until it is at least 0. If it is at least one full turn, subtract full turns until it is less than 360° or 2π. The final window includes 0 and excludes a full turn.
  3. 3. For degrees, compare with the exact boundaries 0°, 90°, 180°, 270°, 360°.
  4. 4. For a multiple of π, compare its coefficient with 0, 12, 1, 32, 2. This works because π is positive.
  5. 5. For a plain radian number, use π2 ≈ 1.5708, π ≈ 3.1416, 3π2 ≈ 4.7124, 2π ≈ 6.2832. Each decimal is rounded to four places. Keep enough precision to decide which side of the exact boundary the number is on.
  6. 6. Use the exact interval in the column under the chosen quadrant. If the angle equals a boundary, name the axis direction instead: 0 gives positive x, π2 positive y, π negative x, 3π2 negative y.
  7. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

Place four angles: degrees, a multiple of π, a plain radian and an axis case

In which quadrant does each angle lie? If an angle lies on an axis, name the axis direction. (a) −480° (b) 23π4 (c) t = −4 (d) 630°

Show the steps and the answer
240°-480°same terminal side
The angles −480° and 240° share the same terminal side, which lies in Quadrant III.
  1. Read the units. (a) and (d) have a degree sign, so they are in degrees. (b) and (c) have no degree sign, so they are in radians.A degree sign means degrees. Without one, the input is in radians.
  2. (a) −480° is negative, so add 360°: −480°+360°=−120°. That is still negative, so add 360° again: −120°+360°=240°.Add full turns until the angle is in the window 0° ≤ θ < 360°.
  3. (a) Compare with the boundaries: 180°<240°<270°. So −480° is in Quadrant III.Quadrant III is 180° < θ < 270°.
  4. (b) The coefficient of π is 234=5.75, which is at least 2. Subtract 2 twice, which takes off 4π: 234−4=74. The angle reduces to 7π4.Subtract full turns of 2π until the angle is in 0 ≤ t < 2π.
  5. (b) Compare the coefficient: 32=1.5<74=1.75<2. So 3π2<7π4<2π, and 23π4 is in Quadrant IV.For a multiple of π, comparing coefficients with 0, 12, 1, 32 and 2 works because π is positive.
  6. (c) t=−4 is negative, so add 2π≈6.2832: −4+2π≈2.2832.Add one full turn so the angle is in 0 ≤ t < 2π.
  7. (c) Compare with the decimal boundaries: 1.5708 < 2.2832 < 3.1416. The number is about 0.7 away from each boundary, so four decimal places are more than enough. The angle −4 is in Quadrant II.Quadrant II is π2 < t < π, with π2 ≈ 1.5708 and π ≈ 3.1416.
  8. (d) 630° is at least 360°, so subtract a full turn: 630°−360°=270°.Subtract full turns until the angle is less than 360°.
  9. (d) 270° equals a boundary. It is a multiple of 90°, so it lies on an axis and not in a quadrant. 270° corresponds to 3π2, the negative y-axis.An angle equal to a boundary is named by its axis direction: 3π2 or 270° gives the negative y-axis.
Answer
(a) −480° is in Quadrant III. (b) 23π4 is in Quadrant IV. (c) t = −4 is in Quadrant II. (d) 630° lies on the negative y-axis, not in a quadrant.
Double-check Undo each reduction. 240° − 720° = −480°. 7π4 + 4π = 23π4. 2.2832 − 6.2832 = −4. 270° + 360° = 630°. As a sign check for (c): cos(−4) ≈ −0.6536 < 0 and sin(−4) ≈ 0.7568 > 0. A negative x-value with a positive y-value matches Quadrant II.

Work to write

  1. (a) −480° + 360° + 360° = 240°; 180° < 240° < 270° → Quadrant III
  2. (b) 23π4 − 4π = 7π4; 32 < 74 < 2 → Quadrant IV
  3. (c) −4 + 2π ≈ 2.2832; 1.5708 < 2.2832 < 3.1416 → Quadrant II
  4. (d) 630° − 360° = 270° → on the negative y-axis (not in a quadrant)

The trap

A plain number such as t = 4 means 4 radians, about 229°, rather than 4°. Also, 1.57 is a rounded landmark, rather than exactly π2. A number close to a rounded landmark needs more digits before you choose a quadrant.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Several backward turns

Locate θ = −410°. Add laps to find its stopping direction in the first turn.

Show the steps and the answer
310°-410°same terminal side
Both rotations end in the lower right.
  1. −410°+360°=−50°, still negative.One added lap is not enough to enter [0°, 360°).
  2. −50°+360°=310°.A second added lap preserves the terminal side and enters the chosen window.
  3. 270°<310°<360°, so the angle is in IV.The fourth quarter lies between these exact boundaries.
Answer
Quadrant IV.
Double-check −410° and 310° differ by 720°, which is exactly two complete turns.

3.7 Increasing and decreasing: where sine and cosine rise and fall

about 3 minOpen the full lesson

The rule

On a chosen interval, increasing means x2>x1 gives f(x2)>f(x1); decreasing means x2>x1 gives f(x2)<f(x1).

On [0,2π], sin increases on [0,π2] and [3π2,2π], and decreases on [π2,3π2]. cos decreases on [0,π] and increases on [π,2π].

How

  1. 1. Read what to compare: a larger angle is the larger input, but its sine or cosine may be a larger or smaller output.
  2. 2. Locate both angles. For a comparison by increasing or decreasing, both must lie in one interval where the requested function keeps the same direction of change.
  3. 3. Use the quadrant motion table, or combine neighboring quarters with the same direction: cosine decreases through I and II and increases through III and IV.
  4. 4. Increasing means the larger input gives the larger output. Decreasing means the larger input gives the smaller output.
  5. 5. If both angles are shifted by the same complete turn, their order is preserved. If you reduce them by different numbers of turns, compare the reduced inputs again before using the table. Their original order need not be the reduced order.
  6. 6. If the two values have opposite signs, the positive value is larger. If neither one interval nor signs decide the comparison, these rules alone are insufficient; use an additional taught exact-value fact.
  7. 7. Check the moving point: higher means larger sine; farther right means larger cosine. For negative outputs, a value closer to 0 is larger, such as −14 > −34.
  8. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

Which value is larger?

Without a calculator, decide which is larger: (a) cos 20° or cos 70°; (b) sin 200° or sin 250°. The question compares two outputs; it does not require finding their decimal values.

Show the steps and the answer
π/2π3π/22π−11
The same picture, shown 4 times now: y = sin x, solid, beside y = cos x, dashed.
  1. (a) 0°<20°<70°<90°, so both inputs lie in I and 70° is larger.One quarter of the circle covers both angles.
  2. Cosine decreases in I, so cos20°>cos70°.As the angle grows, the point moves left and its x-coordinate gets smaller.
  3. (b) 180°<200°<250°<270°, so both inputs lie in III and 250° is larger.Both angles fit between the same two boundaries.
  4. Sine decreases in III, so sin200°>sin250°.As the angle grows, the point moves down toward (0, −1), making y smaller.
Answer
  • (a) cos 20° is larger.
  • (b) sin 200° is larger.
Double-check A second check in DEG mode gives cos 20° ≈ 0.940 and cos 70° ≈ 0.342; sin 200° ≈ −0.342 and sin 250° ≈ −0.940, rounded to three places. A negative number nearer 0 is larger: −0.342 > −0.940.

The trap

Decreasing does not mean negative. In II, sine decreases while staying positive. In IV, sine increases while staying negative. Also, reducing two angles by different numbers of turns can change their order, so compare their reduced inputs before using a direction rule.

Quick check

Try it before you open its steps. It is question 4 of 8 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 8

Negative and decreasing

Which is larger, sin 190° or sin 260°? Compare two negative heights.

Show the steps and the answer
x = cos θy = sin θlower height
A more negative height is smaller.
  1. 180°<190°<260°<270°.Both inputs lie in III.
  2. Sine decreases in III, so sin190°>sin260°.The later point has moved farther below the center.
Answer
sin 190° is larger.
Double-check The point at 190° is nearer the x-axis, so its negative height is closer to 0 and larger.

3.8 Even and odd: what a minus sign inside does

about 6 minOpen the full lesson

The rule

An even or odd function has a domain that contains −t whenever it contains t.

For every t in that domain, even means f(−t)=f(t), and odd means f(−t)=−f(t). Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd. Even graphs are symmetric about the y-axis, meaning the two sides match when folded across that axis. Odd graphs are symmetric about the origin, meaning a half turn around the origin leaves the graph unchanged.

How

  1. 1. Read the negative sign inside the function as an instruction to reverse the input.
  2. 2. Identify the function. Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd.
  3. 3. For an even function, replace f(−t) by f(t). For an odd function, replace f(−t) by −f(t). Write the outside sign immediately.
  4. 4. Evaluate the positive input using a known value. If it still contains extra periods, use the period already taught to reduce it.
  5. 5. Keep the outside sign through every later step. Check that the resulting sign agrees with the terminal point.
  6. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

Using even and odd identities to evaluate functions of −5π6 and −17π6

The terminal point of t = 5π6 on the unit circle is P(−32, 12). Use the even and odd properties of the trigonometric functions to find the exact value of each expression.
(a) sin(−5π6)
(b) sec(−5π6)
(c) cot(−5π6)
(d) csc(−17π6)

Show the steps and the answer
x = cos θy = sin θP
Unit circle with the terminal point P(−32, 12) of t = 5π6 (150°).
  1. Read each minus sign inside the function as reversing the input. A reversed input moves the terminal point from P(−32,12) to its reflection across the x-axis, (−32,−12).Going around the unit circle clockwise instead of counterclockwise by the same amount reflects the point across the x-axis. The x-coordinate stays the same and the y-coordinate changes sign.
  2. Identify each function. Sine, cotangent and cosecant are odd. Secant is even.Cosine and secant are the only even functions among the six. Sine, cosecant, tangent and cotangent are odd.
  3. (a) Write sin(−5π6)=−sin(5π6). The y-coordinate of P gives sin(5π6)=12. So sin(−5π6)=−12.Sine is odd, so f(−t) = −f(t). The outside sign is written right away and kept.
  4. (b) Write sec(−5π6)=sec(5π6)=1cos(5π6). This is 1−32=−23=−233.Secant is even, so f(−t) = f(t) and no sign is added. Its value is the reciprocal of the x-coordinate of P. The denominator is then rationalized.
  5. (c) Write cot(−5π6)=−cot(5π6). From P, cot(5π6)=costsint=−3212=−3. So cot(−5π6)=−(−3)=3.Cotangent is odd, so the outside minus sign is written first. It is then kept while the inside value, which is itself negative, is evaluated.
  6. (d) Write csc(−17π6)=−csc(17π6). Since 17π6=2π+5π6 and cosecant has period 2π,csc(17π6)=csc(5π6)=112=2. So csc(−17π6)=−2.Cosecant is odd, so the outside sign comes first. Next the extra full period 2π is removed, which leaves the known input 5π6.
  7. Check the signs against the terminal points. −5π6 ends in Quadrant III at (−32,−12). Also, −17π6+4π=7π6, which is also in Quadrant III.In Quadrant III, sine, cosecant, cosine and secant are negative, and tangent and cotangent are positive. This matches −12, −233, 3 and −2.
Answer
(a) sin(−5π6) = −12 (b) sec(−5π6) = −233 (c) cot(−5π6) = 3 (d) csc(−17π6) = −2
Double-check Read the values straight from the reflected point (−32, −12) for −5π6. sin = −12. sec = 1−32 = −233. cot = −32−12 = 3. The angle −17π6 is coterminal with 7π6, whose point is (−32, −12), so csc = 1−12 = −2. All four values agree with the answers.

Work to write

  1. sin is odd: sin(−5π6) = −sin(5π6) = −12
  2. sec is even: sec(−5π6) = sec(5π6) = 1−32 = −233
  3. cot is odd: cot(−5π6) = −cot(5π6) = −(−3) = 3
  4. csc is odd: csc(−17π6) = −csc(17π6) = −csc(5π6) = −2, using period 2π
  5. Sign check: −5π6 and −17π6 both end in Quadrant III, where sin, csc and sec are negative and cot is positive

The trap

Moving a minus sign outside cosine or secant changes the answer incorrectly. Even functions preserve the positive-input output's sign. Odd functions reverse that output's sign; if the positive-input output is already negative, the result is positive.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

Cotangent of a reversed angle with extra periods

The terminal point of t = π3 on the unit circle is P(12, 32). Use the fact that cotangent is an odd function, together with its period π, to find the exact value of cot(−19π3). Rationalize the denominator.

Show the steps and the answer
x = cos θy = sin θP
Unit circle with the terminal point P(12, 32) of t = π3, which is used to evaluate cot(π3).
  1. Read cot(−19π3) as cotangent evaluated at the input 19π3 taken in the reverse (clockwise) direction.A negative sign inside the function reverses the input. The negative sign does not yet tell us the sign of the output.
  2. Identify the function as cotangent, which is odd.Sine, cosecant, tangent and cotangent are odd, so f(−t) = −f(t).
  3. Write cot(−19π3)=−cot(19π3).For an odd function the minus sign moves outside. We write it immediately so that it is not lost.
  4. Split the input: 19π3=18π3+π3=6π+π3.The remaining input still contains extra periods, and these must be removed before we use a known value.
  5. Reduce: cot(19π3)=cot(π3+6π)=cot(π3).Cotangent has period π, and 6π is six whole periods. Adding whole periods does not change the value.
  6. Evaluate cot(π3)=xy=1/23/2=13=33.Cotangent is the quotient x/y of the terminal point coordinates, and P(12, 32) is the given terminal point for π3. Multiplying the top and bottom by 3 rationalizes the denominator.
  7. Restore the outside sign: cot(−19π3)=−33.The minus sign from the odd property has to be kept through every later step.
Answer
cot(−19π3) = −33
Double-check −19π3 = −6π − π3, so the angle is coterminal with −π3. Its terminal point is the reflection of P across the x-axis, which is (12, −32) in Quadrant IV. In Quadrant IV, x > 0 and y < 0, so cotangent is negative. The direct quotient is x/y = 1/2−3/2 = −13 = −33. This matches the answer.

Work to write

  1. cot is odd, so cot(−19π3) = −cot(19π3)
  2. 19π3 = 6π + π3 and the period of cot is π, so cot(19π3) = cot(π3)
  3. cot(π3) = 1/23/2 = 33
  4. cot(−19π3) = −33

3.9 Combining properties to find signs and known exact values

Open the full lesson

The rule

Handle the input's minus sign, remove whole periods, identify a quadrant or an axis, then use a known exact value or a suitable identity.

For an unfamiliar angle, the properties can determine a sign or a smaller equivalent expression without determining a special exact value.

How

  1. 1. Read whether the request is a location or a function value or sign. For a location, keep the original signed angle, reduce only by full turns of 2π or 360°, then use its terminal point and stop. Changing the sign of the angle or using a tangent half-period may change its location.
  2. 2. If the angle is negative, use even or odd symmetry and record any outside negative sign.
  3. 3. Remove whole periods: 2π or 360° for sin, cos, sec and csc; π or 180° for tan and cot.
  4. 4. Locate the reduced angle. If it is on an axis, use its coordinates and check denominators. Otherwise use the quadrant to determine the reduced expression's sign.
  5. 5. For a sign question, combine the reduced expression's sign with the outside sign and stop. For an exact-value question, use a known value or an identity. If neither applies, retain the exact expression instead of inventing a value.
  6. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

One angle, three questions: θ = −1020°

Let θ = −1020°. Answer three questions without a calculator. (a) In which quadrant does the terminal side of θ lie, or does it lie on an axis? (b) Find the exact value of cos(−1020°). (c) Decide whether tan(−1020°) is positive, negative, zero or undefined. Use the odd property of tangent and its period of 180°.

Show the steps and the answer
60°-1020°same terminal side
The angle −1020° turns clockwise almost three full turns.
  1. Part (a) asks for a location. Keep the signed angle −1020° and add full turns: −1020°+3·360°=−1020°+1080°=60°.Adding whole turns of 360° keeps the terminal side the same. Changing the sign to +1020° would give 300°, which is a different place.
  2. 60° lies between 0° and 90°, so the terminal side of θ is in Quadrant I. Stop here for part (a).Location depends only on where the terminal point lies after the reduction by full turns.
  3. Part (b): cosine is even, so cos(−1020°)=cos(1020°). There is no outside sign.cos(−t) = cos t for every t.
  4. Remove whole periods of 360°: 1020°−2·360°=300°. So cos(1020°)=cos300°.Cosine has period 360°.
  5. 300° is in Quadrant IV, where cosine is positive. Its reference angle is 360°−300°=60°. So cos300°=cos60°=12.In Quadrant IV the x-coordinate is positive. The known exact value is cos 60° = 12.
  6. Part (c): tangent is odd, so tan(−1020°)=−tan(1020°). Record the outside negative sign.tan(−t) = −tan t for every t where tangent is defined.
  7. Remove whole periods of 180°: 1020°−5·180°=1020°−900°=120°. So tan(1020°)=tan120°.Tangent has period 180°. This reduction is used only for the value, not for the location.
  8. 120° is in Quadrant II, where tangent is negative, so tan120°<0. Combine this with the outside sign: −(negative) is positive. So tan(−1020°)>0.For a sign question you multiply the outside sign by the sign of the reduced expression, and then you stop.
Answer
(a) Quadrant I. (b) cos(−1020°) = 12. (c) tan(−1020°) is positive.
Double-check −1020° is coterminal with 60°. Then cos 60° = 12, which matches (b). Also tan 60° = 3 > 0, which matches (c). Both coordinates are positive in Quadrant I, which agrees with (a).

Work to write

  1. −1020° + 1080° = 60°, so the terminal side is in Quadrant I
  2. cos(−1020°)=cos(1020°)=cos(300°)=cos60°=12
  3. tan(−1020°)=−tan(1020°)=−tan(120°)
  4. tan 120° < 0, so tan(−1020°) > 0

The trap

Losing the outside sign while reducing the input changes the expression. Carry it through every equality. Also check axis points before attempting a reciprocal: an undefined value cannot be fixed by moving a negative sign.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

A negative reciprocal function

Find csc(−13π6). Keep the outside sign while reducing.

Show the steps and the answer
x = cos θy = sin θsin t = −1/2
The negative height has reciprocal −2.
  1. csc(−13π6)=−csc13π6.Cosecant is odd.
  2. 13π6−2π=13π6−12π6=π6.Cosecant has period 2π.
  3. −cscπ6=−(1÷12)=−2.Cosecant is the reciprocal of the known sine.
Answer
−2
Double-check The original angle reduces to 11π6, in Quadrant IV, where cosecant is negative.

3.10 All six functions from one value and a quadrant

Open the full lesson

The rule

sin2θ+cos2θ=1.

Thus cosθ=±1−sin2θ and sinθ=±1−cos2θ, with the sign chosen by the quadrant. Then tanθ=sinθcosθ,cotθ=cosθsinθ,secθ=1cosθ,cscθ=1sinθ, wherever the denominator is nonzero.

How

  1. 1. Translate the request: one trig value and a quadrant are given; find each of the five other outputs.
  2. 2. Check the sign and range against the stated quadrant. Inside a quadrant both coordinates are nonzero: require 0 < |sin θ| < 1 and 0 < |cos θ| < 1, or |sec θ| > 1 and |csc θ| > 1. A given tangent or cotangent must be nonzero with the quadrant's sign. Reject an endpoint or zero that forces an axis.
  3. 3. If secant or cosecant is given, take its reciprocal to get cosine or sine. If tangent or cotangent is given, use its quotient formula to express sine in terms of cosine or cosine in terms of sine.
  4. 4. Substitute into sin2θ + cos2θ = 1. Solve for the missing square; this finds the coordinate's size without yet choosing its sign.
  5. 5. Take the nonnegative square root, then choose the coordinate's sign from the quadrant.
  6. 6. Use quotients and reciprocals for the other functions. Show division by fractions and any rationalizing.
  7. 7. Check the sum of the sine and cosine squares, every quadrant sign and the original given value.
  8. Read a reference-table entry in the column under its input or category in the matching picture.

Worked example

Worked example

All six functions from cos θ = 27 in Quadrant IV

Suppose cos θ = 27 and the terminal side of θ lies in Quadrant IV. Find the exact values of sin θ, tan θ, cot θ, sec θ and csc θ. Rationalize any denominators.

Show the steps and the answer
P
Unit circle with the terminal point P of θ ≈ 287° in Quadrant IV.
  1. Given: cosθ=27,θ in Quadrant IV. Find: sinθ,tanθ,cotθ,secθ,cscθ.One trig value and a quadrant fix the point on the unit circle. The other five functions come from it.
  2. Check the given value. It is positive, and 0<27<1. In Quadrant IV, cosine is positive and sine is negative.Inside a quadrant both coordinates are nonzero with absolute value less than 1. Cosine is positive in Quadrant IV, so the data are consistent.
  3. Cosine is given directly, so no reciprocal or quotient step is needed. Substitute it into sin2θ+cos2θ=1: sin2θ+(27)2=1, so sin2θ=1−449=4549.The Pythagorean identity gives the size of the missing coordinate. Its sign is not chosen yet.
  4. Take the nonnegative root: 4549=457=357. Sine is negative in Quadrant IV, so sinθ=−357.The quadrant decides the sign. Points in Quadrant IV lie below the x-axis, so the y-coordinate is negative.
  5. tanθ=sinθcosθ=(−357)÷27=−357·72=−352.Dividing by a fraction means multiplying by its reciprocal. The 7s cancel.
  6. cotθ=1tanθ=−235=−2515.Cotangent is the reciprocal of tangent. Multiply top and bottom by 5 to rationalize: 35 · 5 = 15.
  7. secθ=1cosθ=72.Secant is the reciprocal of cosine.
  8. cscθ=1sinθ=−735=−7515.Cosecant is the reciprocal of sine. Rationalize by multiplying top and bottom by 5.
Answer
sin θ = −357, tan θ = −352, cot θ = −2515, sec θ = 72, csc θ = −7515
Double-check Pythagorean identity: sin2θ + cos2θ = 4549 + 449 = 4949 = 1. Signs in Quadrant IV: cos and sec are positive; sin, csc, tan and cot are negative. All six match. Given value: 1secθ = 27 = cos θ. Products: tan θ · cot θ = (−352)(−2515) = 3030 = 1, and sin θ · csc θ = (−357)(−7515) = 105105 = 1.

Work to write

  1. sin2θ=1−449=4549
  2. sin θ = −357 (negative in Quadrant IV)
  3. tanθ=−352
  4. cot θ = −2515
  5. sec θ = 72
  6. csc θ = −7515
  7. Check: 4549 + 449 = 1

The trap

Taking the sign from the square root. 1625 = 45 is positive, but in Quadrant IV sine is negative, so sin θ = −45. The quadrant decides the sign, never the square root.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

A root that must be simplified

sin θ = −27 and θ is in Quadrant IV. Find the other five exact outputs.

Show the steps and the answer
x = cos θy = sin θP((3√5)/7, −2/7)
The horizontal coordinate is positive and the height is negative.
  1. Cosine and secant are positive; sine, cosecant, tangent and cotangent are negative.Quadrant IV is right of the y-axis and below the x-axis.
  2. cos2θ=1−(−27)2=4949−449=4549.This subtraction isolates the missing coordinate's square.
  3. cosθ=4549=457=357.Cosine is positive here. The perfect-square factor 9 in 45 gives 45 = 35.
  4. tanθ=(−27)÷357=−235=−2515.The quotient definition gives tangent; multiplying top and bottom by 5 rationalizes it.
  5. cotθ=357÷(−27)=−352.Use cosine divided by sine.
  6. secθ=735=7515; cscθ=−72.Take the coordinate reciprocals and rationalize secant.
Answer
  • cosθ=357
  • tanθ=−2515
  • cot θ = −352
  • sec θ = 7515
  • csc θ = −72
Double-check The coordinate squares 449 and 4549 add to 1. Their signs fit Quadrant IV.

4 Graphs of sine and cosine

8 lessonsOpen the unit's crash course

4.1 1. Turn a circle's height into the sine graph

Open the full lesson

The rule

For y=sinx: Domain is all real numbers; Range is [−1,1]; the graph is Continuous.

Period (T)=2π; sin(x+2kπ)=sinx for any Integer k; sin(−x)=−sinx.

How

  1. Treat x as the Input, also called the Independent variable, and y = sin x as the Output, also called the Dependent variable. The output depends on which input you choose.
  2. Use radians on the horizontal axis. On a Unit circle, a Radian input has the same numerical value as signed rim distance along the circle. Ordinary traveled Arc length equals the input's magnitude. The Central angle is the turn at the center.
  3. Read each column of the value table: its top entry is x and its bottom entry is sin x. Point plotting means putting the Ordered pair (x, sin x) on the Graph in the xy-plane.
  4. Locate the five Key points (0, 0), (π2, 1), (π, 0), (3π2, −1), and (2π, 0). They record the start, top, middle, bottom, and return. A Key point is an anchor at a quarter-cycle position; five such anchors divide a cycle into four gaps. A quarter turn is one fourth of a full turn. A peak is a top height and a valley, also called a trough, is a bottom height.
  5. Draw a smooth curve through the points. An Intercept is a crossing or touching of an axis; here x = 0, π, and 2π give output 0.
  6. Continue the same pattern left and right. One Cycle has horizontal length 2π, because a full circle lap repeats the entire height record.

Worked example

Worked example

One cycle of y = sin x on [−2π, 0] from clockwise trips around the unit circle

A point P starts at (1, 0) on the unit circle. For an input x in radians, P travels a rim distance equal to the magnitude of x, counterclockwise when x > 0 and clockwise when x < 0. The output y = sin x is the height (y-coordinate) of the point where P stops. The figure marks P after a counterclockwise quarter turn of 90°, at (0, 1). (a) For x = −2π, −3π2, −π, −π2 and 0, find where P stops and make a value table of sin x. (b) Plot the ordered pairs (x, sin x), using π ≈ 3.14 to place the inputs, and draw one cycle of y = sin x on [−2π, 0]. Name its intercepts, its peak and its valley. (c) Continue the pattern to find sin(21π2), and state the domain and range of y = sin x.

Show the steps and the answer
x = cos θy = sin θP
Unit circle with P at (0, 1), reached from (1, 0) by a counterclockwise quarter turn of 90°, the input x = π2.
  1. Name the variables. The input x is the independent variable: the signed rim distance P travels. The output y=sinx is the dependent variable: the height where P stops.Where P stops, and so how high it is, depends on how far and which way it travels. So x is chosen first and y is read from it.
  2. Turn each input into quarter turns. The unit circle's circumference is 2π×1=2π, so a full lap covers 2π of rim. A quarter turn, a central angle of 90°, covers 2π4=π2. Divide each magnitude by π2: π2 is 1 quarter turn, π is 2, 3π2 is 3 and 2π is 4, one full lap. The nonzero inputs are negative, so those trips go clockwise. For x=0, P does not move.On a unit circle a radian input has the same value as the signed rim distance. The arc length traveled equals the input's magnitude, and the sign gives the direction.
  3. Walk clockwise from (1, 0) one quarter turn at a time: P reaches (0,−1), then (−1,0), then (0, 1), then (1, 0) again. So sin(−π2)=−1,sin(−π)=0,sin(−3π2)=1 and sin(−2π)=0. Also sin0=0, since P stays at (1, 0).Clockwise from (1, 0) the path heads down first, passing the bottom, the left side and the top of the circle in that order. sin x is the y-coordinate of the stopping point.
  4. Write the value table with the inputs in increasing order. Top row x: −2π,−3π2,−π,−π2, 0. Bottom row sin x: 0, 1, 0, −1, 0. Each column is one ordered pair (x, sin x).A column's top entry is the input and its bottom entry is the output for that input, so every column gives exactly one point to plot.
  5. Plot (−2π,0),(−3π2,1),(−π,0),(−π2,−1) and (0, 0). With π≈3.14: 2×3.14=6.28,1.5×3.14=4.71 and 0.5×3.14=1.57. So the inputs sit at about −6.28,−4.71,−3.14,−1.57 and 0 on the horizontal axis.The horizontal axis is measured in radians, which are real numbers, so each multiple of π has its own place on the number line.
  6. Name the five key points: start (−2π,0), top (−3π2,1), middle (−π,0), bottom (−π2,−1) and return (0, 0). Neighboring inputs are π2 apart, so the five anchors split the cycle into four equal gaps.The inputs are one quarter turn apart, which is the spacing of the key points. Height 1 belongs to the highest point of the circle (the peak), and height −1 to the lowest (the valley).
  7. Draw a smooth curve through the points. It rises from (−2π,0) to the peak (−3π2,1), falls through (−π,0) to the valley (−π2,−1), and rises again to (0, 0). The intercepts are at x=−2π,−π and 0, where sinx=0, and the curve meets the y-axis at the origin.P slides along the rim without jumping, so its height changes gradually and the graph is continuous. The curve stays between −1 and 1 because no point of the unit circle is higher than 1 or lower than −1.
  8. Compare with the cycle on [0,2π]. Adding 2π to the inputs gives 0, π2,π,3π2,2π with the same outputs 0, 1, 0, −1, 0. So the cycle on [−2π,0] is the cycle on [0,2π] moved 2π to the left. Repeating it left and right covers every real x: the domain is all real numbers and the range is [−1,1].Adding 2π adds one full counterclockwise lap, which ends at the same point, so sin(x + 2π) = sin x. One cycle has horizontal length 2π.
  9. For x=21π2, take away 6 full laps, 12π=24π2: 21π2−24π2=−3π2. So sin(21π2)=sin(−3π2)=1, the peak value in the table.sin(x + 2kπ) = sin x for any integer k. Here k = −6, which moves the input into the cycle already drawn on [−2π, 0].
Answer
(a) For x = −2π, −3π2, −π, −π2 and 0, P stops at (1, 0), (0, 1), (−1, 0), (0, −1) and (1, 0). The value table is x: −2π, −3π2, −π, −π2, 0 with sin x: 0, 1, 0, −1, 0. (b) The cycle is a smooth curve through (−2π, 0), (−3π2, 1), (−π, 0), (−π2, −1) and (0, 0). Its intercepts are at x = −2π, −π and 0, its peak is (−3π2, 1) and its valley is (−π2, −1). (c) sin(21π2) = 1. The domain is all real numbers and the range is [−1, 1].
Double-check Use sin(−x) = −sin x with the key points on [0, 2π]: sin(−π2) = −sin(π2) = −1, sin(−π) = −sin(π) = 0, sin(−3π2) = −sin(3π2) = −(−1) = 1 and sin(−2π) = −sin(2π) = 0. All four match the table. For (c), use k = −5 instead: 21π2 − 10π = 21π2 − 20π2 = π2. That is five laps plus a counterclockwise quarter turn, which stops at the top point (0, 1) marked in the figure. So sin(21π2) = sin(π2) = 1 again.

Work to write

  1. Quarter turn: 2π4 = π2 of rim; x < 0 means clockwise
  2. x=−π2:P=(0,−1),sin(−π2)=−1
  3. x=−π:P=(−1,0),sin(−π)=0
  4. x=−3π2:P=(0,1),sin(−3π2)=1
  5. x=−2π:P=(1,0),sin(−2π)=0;x=0:sin0=0
  6. x: −2π, −3π2, −π, −π2, 0 and sin x: 0, 1, 0, −1, 0
  7. Key points: (−2π, 0), (−3π2, 1), (−π, 0), (−π2, −1), (0, 0)
  8. Intercepts: x = −2π, −π, 0; peak (−3π2, 1); valley (−π2, −1)
  9. 21π2 − 12π = −3π2, so sin(21π2) = sin(−3π2) = 1
  10. Domain: all real numbers; range: [−1, 1]; period 2π

The trap

Do not turn the exact radian input π2 into a degree input of π2°. It means a quarter turn, or 90°. The decimal 1.57 is only a rounded label for that exact input.

Quick check

Try it before you open its steps. It is question 2 of 3 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 3

Keep size and sign separate below the left axis

Find sin(5π4) exactly. This asks for the circle height at 225°, where the reference triangle supplies size and the region supplies sign.

Show the steps and the answer
x = cos θy = sin θ5π/4
Below the axis, the same reference triangle gives a negative sine height.
  1. π=4π4<5π4<6π4=3π2, so the ray is in Quadrant III.The turn finishes between the left side and the bottom, below the horizontal axis.
  2. Reference angle =5π4−π=5π4−4π4=π4. Check π+π4=5π4.Subtracting the half turn finds and verifies the small tilt below the left horizontal axis.
  3. Use magnitude 22 and attach a minus sign: sin(5π4)=−22.The 45° triangle gives an unsigned leg length, but the circle point's height is negative below the axis.
Answer
  • Reference angle = π4.
  • sin(5π4)=−22.
Double-check A half turn carries the 45° unit-circle point to the 225° point and reverses both coordinates. Its former height 22 becomes −22, matching the answer.

4.2 2. A changes height: amplitude, stretch, compression, reflection

Open the full lesson

The rule

For y=Asinx: Amplitude =|A|=maximum−minimum2; Midline is y=0; Range is [−|A|,|A|].

|A| > 1 stretches vertically; 0 < |A| < 1 compresses vertically; A < 0 reflects across the x-axis. For A≠0,T=2π.

How

  1. Find A, the Constant multiplying sine on the outside. In −3 sin x, A = −3; in sin x, the invisible coefficient is A = 1.
  2. Compute |A| by keeping its size and removing its minus sign. This is the Amplitude, never a negative distance.
  3. Compare |A| with 1 to decide whether there is a Vertical stretch, a Vertical compression, or unchanged height. A negative sign adds a Reflection.
  4. Multiply each original sine output by A. The input coordinates stay fixed because this is an outside multiplication.
  5. Write the Midline y = 0 and Range [−|A|, |A|]. Maximum and Minimum mean highest and lowest outputs; a Local maximum or Local minimum is a peak or valley compared with nearby points.
  6. If you are given extreme heights, subtract minimum from maximum and divide by 2. The source waves are centered at zero; do not mistake the entire top-to-bottom distance for the amplitude.
  7. If A = 0, every output is 0. Draw the constant graph y = 0 and do not assign a smallest positive period.

Worked example

Worked example

Shallower and flipped: the border edge y = −0.6 sin x

A designer cuts a wavy edge for a paper border. On the design grid 1 unit = 1 cm, x is the distance along the strip, and y is the height above the strip's center line y = 0 (negative y means below the line). The template edge is y = sin x, which passes through the five points (0, 0), (π2, 1), (π, 0), (3π2, −1) and (2π, 0). In the figure these x-values are plotted as the decimals 0, 1.57, 3.14, 4.71 and 6.28. To get a shallower wave that dips below the center line first, the designer switches to the edge y = −0.6 sin x. (a) Writing the new edge as y = A sin x, name A and find the amplitude. (b) Decide whether the height is stretched, compressed or unchanged, and whether the edge is reflected. (c) Find the point of the new edge at each of the five x-values. (d) Give the midline, the maximum and the minimum height and where each occurs for 0 ≤ x ≤ 2π, the range, and the period. (e) A coworker measures 1.2 cm from the highest point of the new edge to its lowest point and says the amplitude is 1.2 cm. Explain the mistake and find the amplitude from the extreme heights.

(0, 0)(1.57, 1)(3.14, 0)(4.71, −1)(6.28, 0)246−2−112
The border's center line y = 0, drawn along the x-axis.
Show the steps and the answer
  1. Write the new edge as y=Asinx and read the constant multiplying sine on the outside: y=−0.6sinx gives A=−0.6.A is the number that multiplies the whole output sin x, and the minus sign belongs to A.
  2. Remove the sign to get the amplitude: |A|=|−0.6|=0.6, so the new edge reaches 0.6 cm above and 0.6 cm below the center line.Amplitude is the distance from the midline to a peak, so it keeps the size of A and is never negative.
  3. Compare |A| with 1: 0 < 0.6 < 1, so each height becomes 0.6 times the template height, which is a vertical compression. Because A=−0.6<0, the edge is also reflected across the x-axis, which here is the center line.A size between 0 and 1 compresses vertically (a size above 1 would stretch), and a negative A sends every output to the opposite side of y = 0.
  4. Multiply each template height by −0.6 and keep each x: −0.6·0=0,−0.6·1=−0.6,−0.6·0=0,−0.6·(−1)=0.6 and −0.6·0=0. The new points are (0, 0), (π2,−0.6),(π,0),(3π2,0.6) and (2π,0).The −0.6 multiplies outside the sine, so it changes outputs only. The inputs stay fixed, and the zeros at 0, π and 2π stay put because −0.6 · 0 = 0.
  5. Read the extremes from the new points: the maximum (highest output) is 0.6 at x=3π2 and the minimum (lowest output) is −0.6 at x=π2. Write the midline y=0 and the range [−0.6,0.6].sin x runs from −1 to 1, so −0.6 sin x runs from −0.6 to 0.6 and stays centered on y = 0. The reflection turns the template peak at π2 into a valley and the template valley at 3π2 into a peak.
  6. State the period: A=−0.6≠0, so T=2π, and the pattern repeats every 2π≈6.28 cm along the strip.An outside multiplication changes heights, not inputs, so one full wave still covers an x-length of 2π.
  7. Answer the coworker from the extreme heights: maximum−minimum2=0.6−(−0.6)2=1.22=0.6. The measured 1.2 cm is the whole top-to-bottom distance, which is twice the amplitude.The wave is centered on y = 0, so the amplitude is the distance from the midline to a peak. That is half the distance from the lowest point to the highest point.
Answer
  • (a) A = −0.6 and the amplitude is 0.6 cm. (b) Vertical compression, since 0 < 0.6 < 1, and a reflection across the x-axis, since A < 0. (c) (0, 0), (π2, −0.6), (π, 0), (3π2, 0.6), (2π, 0). (d) Midline y = 0
  • maximum 0.6 at x = 3π2
  • minimum −0.6 at x = π2
  • range [−0.6, 0.6]
  • period T = 2π. (e) 1.2 cm is maximum − minimum, the full height of the wave
  • the amplitude is 1.22 = 0.6 cm.
Double-check Divide each nonzero new height by its template height: −0.61 = −0.6 and 0.6−1 = −0.6. Both ratios equal A, so every output was multiplied by A while every input stayed the same, and the negative ratios confirm the reflection. The extremes ±0.6 match the range endpoints ±|A|, and 0.6−(−0.6)2 = 0.6 = |A| agrees with part (a).

Work to write

  1. A=−0.6
  2. Amplitude = |−0.6| = 0.6
  3. 0 < 0.6 < 1, so vertical compression
  4. A < 0, so reflection across the x-axis
  5. New points: (0, 0), (π2, −0.6), (π, 0), (3π2, 0.6), (2π, 0)
  6. Maximum 0.6 at x = 3π2; minimum −0.6 at x = π2
  7. Midline y = 0; Range [−0.6, 0.6]
  8. T = 2π
  9. 0.6−(−0.6)2 = 1.22 = 0.6, so the amplitude is 0.6 cm, not 1.2 cm

The trap

A = −3 is a signed coefficient, but Amplitude = |−3| = 3 is a distance. The minus sign describes reflection, not a negative amplitude. The unshifted Midline is y = 0, the x-axis; x = 0 is a vertical line.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Invert a test tone: y = −sin x flips the wave without changing its size

In an audio editor, a test tone is drawn as the curve y = sin x, with x in radians. The editor's Invert command multiplies every output by −1, so the inverted tone is y = −sin x. The original tone passes through these seven points of y = sin x: (−π, 0), (−π2, −1), (−π6, −12), (0, 0), (π6, 12), (π2, 1) and (π, 0). (a) Name A in y = −sin x and find the amplitude. (b) Decide whether Invert stretches, compresses or keeps the height of the wave, and whether it reflects the graph. (c) Find the point of y = −sin x at each of the same seven inputs. (d) State the midline, the range and the period T of y = −sin x. (e) For −π ≤ x ≤ π, find the maximum and the minimum of y = −sin x and the inputs where they occur. Then use them to check the amplitude.

(−π, 0)(−π/2, −1)(−π/6, −1/2)(0, 0)(π/6, 1/2)(π/2, 1)(π, 0)−4−224−2−112
The original tone y = sin x before Invert.
Show the steps and the answer
  1. Find A. Write y=−sinx as y=(−1)·sinx, so A=−1.A is the constant multiplying sine on the outside. A lone minus sign in front of sin x is a hidden factor of −1, just as plain sin x hides A = 1.
  2. Find the amplitude: |A|=|−1|=1.The amplitude keeps the size of A and removes its minus sign. It measures how far the wave reaches from the midline, which is a distance and is never negative. The amplitude is 1, not −1.
  3. Compare |A|=1 with 1. They are equal, so there is no vertical stretch and no vertical compression, and the height is unchanged. Since A=−1<0, the graph is also reflected across the x-axis.|A| > 1 would stretch the wave and 0 < |A| < 1 would compress it; |A| = 1 does neither. The size of A decides stretch or compression. The sign of A, separately, decides the reflection.
  4. Keep each input and multiply each output by A=−1: (−π,0)→(−π,0),(−π2,−1)→(−π2,1),(−π6,−12)→(−π6,12),(0,0)→(0,0),(π6,12)→(π6,−12),(π2,1)→(π2,−1),(π,0)→(π,0).The −1 multiplies outside the sine, so only the outputs change and every input stays fixed. Each point moves straight across the x-axis to the same distance on the other side. Points with output 0 lie on the x-axis, so they do not move.
  5. Write the midline y=0 and the range [−|A|,|A|]=[−1,1]. Because A=−1≠0, the period is T=2π.Multiplying a zero-centered wave by A keeps it centered on y = 0, and its outputs then run from −|A| up to |A|. A only rescales heights, so the period of sine stays 2π. Only A = 0 would flatten the graph to y = 0 with no smallest positive period.
  6. Read the extremes from the new points. The maximum is 1, at x=−π2, and the minimum is −1, at x=π2. Check the amplitude: maximum−minimum2=1−(−1)2=22=1.The maximum and minimum are the highest and lowest outputs, and the range [−1, 1] shows that no output goes beyond them. The amplitude is half the top-to-bottom distance, not the whole distance of 2, and it matches |A| = 1 from step 2. The flip also swaps peak and valley: sin x peaks at x = π2, so −sin x has its valley there.
Answer
  • (a)A=−1
  • amplitude = |A| = 1. (b) Height unchanged (no vertical stretch, no vertical compression)
  • the graph is reflected across the x-axis. (c) (−π, 0), (−π2, 1), (−π6, 12), (0, 0), (π6, −12), (π2, −1), (π, 0). (d) Midline y = 0
  • range [−1, 1]
  • T = 2π. (e) Maximum 1 at x = −π2
  • minimum −1 at x = π2
  • 1−(−1)2 = 1 confirms the amplitude.
Double-check At each input, add the old output to the new output: 0 + 0 = 0, −1 + 1 = 0, −12 + 12 = 0, and so on. Every sum is 0, so each new point is the mirror image of the old point across the x-axis, at the same distance from it. That is a reflection with no change of size. Spot check: at x = π2, −sin x = −(1) = −1, the valley where sin x had its peak. The extremes 1 and −1 give 1−(−1)2 = 1 = |A|. The range [−1, 1] is the same as that of sin x, so the inverted tone swings exactly as far as the original.

Work to write

  1. A=−1
  2. Amplitude = |A| = |−1| = 1
  3. |A| = 1, so no vertical stretch or compression (height unchanged)
  4. A < 0, so the graph is reflected across the x-axis
  5. Points of y = −sin x (same inputs, outputs times −1): (−π, 0), (−π2, 1), (−π6, 12), (0, 0), (π6, −12), (π2, −1), (π, 0)
  6. Midline: y = 0
  7. Range: [−1, 1]
  8. Period: T = 2π
  9. Maximum 1 at x = −π2; minimum −1 at x = π2
  10. Check: 1−(−1)2 = 1 = |A|

4.3 3. Omega changes width: derive the period

Open the full lesson

The rule

For y=Asin(ωx), with A≠0 and ω≠0: T=2π|ω| and |ω|=2πT.

|ω|>1 compresses horizontally; 0<|ω|<1 stretches horizontally; ω<0 reverses the input direction. A=0 or ω=0 gives a constant graph without a smallest positive period.

How

  1. Read ω, the entire coefficient multiplying x inside sine. In sin(2x), ω = 2; in sin(12x), ω = 12; in sin(5πx), ω = 5π.
  2. Check A ≠ 0 and ω ≠ 0 before calling the graph a nonconstant wave.
  3. Take |ω| to remove direction. Period (T) measures a positive horizontal length.
  4. Compute T = 2π ÷ |ω|. Divide by a fraction by multiplying by its reciprocal. Cancel π only when it is a common factor of the full numerator and denominator.
  5. Compare |ω| with 1. Larger than 1 means Horizontal compression; between 0 and 1 means Horizontal stretch; equal to 1 keeps the original width.
  6. Check by multiplying the proposed period by |ω|. The product must be 2π, exactly one inside lap.
  7. If a graph gives T and you need ω, use |ω| = 2πT. Choosing ω > 0 gives the convenient representative ω = 2πT; period alone does not determine its sign.

Worked example

Worked example

Wind turbine blade tip: period from ω, then ω from a period

A wind turbine's blades turn at a steady rate. One blade is 42 m long from the center of the hub to its tip. At time x = 0 seconds that tip is level with the hub's center and moving upward. Its height above the hub's center, in meters, is modeled by y = 42 sin(4π9x). The sine input u = 4π9x is the angle, in radians, that the blades have turned. The figure graphs u (vertical axis) against x as a straight line through (0, 0) and (9, 4π). (a) Find the period T of the tip's height, say whether the graph is a horizontal compression or a horizontal stretch of y = 42 sin x, and check T. (b) In lighter wind the rotor slows until one full turn takes 7 seconds, and the tip again starts level with the hub's center and moving upward. Find ω for the new model y = 42 sin(ωx), and say whether its graph is a horizontal compression or stretch of y = 42 sin x.

(0, 0)(9, 4π)2468104812
The blades' turning angle u = 4π9x (radians, vertical axis) against time x (seconds).
Show the steps and the answer
  1. Read ω as the whole coefficient of x inside sine. In y=42sin(4π9x),ω=4π9, not 49 and not 4π.The width depends on the entire number multiplying x; the π and the 9 both belong to ω.
  2. Check that A=42≠0 and ω=4π9≠0.Only then is the height a nonconstant wave with a smallest positive period. A = 42 sets how high the tip goes, not how wide one cycle is, so it plays no part in T.
  3. Take |ω|=4π9; ω is already positive.A period is a positive horizontal length, so only the size of ω matters, not its sign.
  4. T=2π÷|ω|=2π÷4π9=2π·94π=18π4π=184=92=4.5 seconds.Sine repeats when its input grows by 2π, and the input grows by |ω| radians per second, so one cycle lasts 2π ÷ |ω| seconds. Dividing by a fraction means multiplying by its reciprocal. π is a factor of both 18π and 4π, so it cancels, and 184 then reduces to 92.
  5. Compare |ω| with 1: 4π9≈1.40>1, so the graph is a horizontal compression of y=42sinx. Its period shrinks from 2π≈6.28 s to 4.5 s.|ω| > 1 squeezes one cycle into less than 2π. Use the full value including π: 49 by itself is below 1 and would wrongly suggest a stretch.
  6. Check: T·|ω|=92·4π9=36π18=2π.Across one period the input must advance exactly one lap, 2π radians; any other product means T is wrong.
  7. Read the line u=4π9x: it rises from 0 at x=0 to 4π at x=9. 4π is two laps, so one lap takes 9÷2=4.5 seconds, which matches T.The input u is the angle turned, a straight line with slope ω. Each rise of 2π is one full turn of the blade and one cycle of its height.
  8. For (b), T=7, so |ω|=2πT=2π7. The tip again starts level and rising, so ω>0. That gives ω=2π7 and the model y=42sin(2π7x).|ω| = 2πT undoes T = 2π ÷ |ω|. The period alone fixes only |ω|. With A = 42 > 0, a negative ω would make the tip drop first, so the rising start picks ω > 0.
  9. Compare: 2π7≈0.90, between 0 and 1, so this graph is a horizontal stretch of y=42sinx. Check: 7·2π7=2π.A turn that takes longer than 2π ≈ 6.28 s needs |ω| < 1. The product 2π confirms exactly one lap per period.
Answer
  • (a) T = 92 = 4.5 seconds
  • |ω| = 4π9 ≈ 1.40 > 1, so the graph is a horizontal compression of y = 42 sin x. (b) ω = 2π7 ≈ 0.90, giving y = 42 sin(2π7x), a horizontal stretch of y = 42 sin x.
Double-check 92 · 4π9 = 36π18 = 2π, so 4.5 s is exactly one lap of the input: 42 sin(4π9(x + 92)) = 42 sin(4π9x + 2π) = 42 sin(4π9x). The line u = 4π9x reaches 4π, two full turns, at x = 9, which is 4.5 s per turn. For (b), 7 · 2π7 = 2π. The order 4.5 < 2π ≈ 6.28 < 7 agrees with a compression in (a) and a stretch in (b).

Work to write

  1. ω = 4π9; A = 42 ≠ 0 and ω ≠ 0, so the graph is a nonconstant wave
  2. |ω|=4π9
  3. T=2π÷4π9=2π·94π=18π4π=92=4.5s
  4. |ω| = 4π9 ≈ 1.40 > 1 → horizontal compression of y = 42 sin x
  5. Check: 92 · 4π9 = 2π
  6. (b) |ω| = 2π7; the tip rises first, so ω = 2π7 and y = 42 sin(2π7x)
  7. 2π7 ≈ 0.90 < 1 → horizontal stretch; check: 7 · 2π7 = 2π

The trap

The inside multiplier is not the period. For sin(2x), ω = 2 but T = π. Divide 2π by |ω|. A negative ω also gives a positive period because width is a distance, not a direction.

Quick check

Try it before you open its steps. It is question 1 of 2 in the full lesson, where they run from easy to exam-hard.

Try it · level 1 of 2

An inside coefficient containing π

This asks for the period of y = sin(5πx). Keep the whole factor 5π as omega, then simplify.

Show the steps and the answer
first top at 1/10one cycle at 2/5amplitude 1one period00.5−11
A coefficient containing π can produce a period with no π remaining.
  1. Read ω=5π; it is positive, so |ω|=5π.Both 5 and π multiply x inside sine.
  2. T=2π5π=25.The numerator and denominator have the common nonzero factor π, which cancels.
  3. Substitute: 5π×25=2π.The computed outside distance must generate one full inside turn.
Answer
  • ω = 5π.
  • Period = 25.
  • Amplitude = 1.
Double-check The first peak is at input 110, because 5π × 110 = π2. Four such quarter-period distances give 410 = 25.

4.4 4. Read A and omega before doing arithmetic

Open the full lesson

The rule

For y=Asin(ωx), with A≠0 and ω≠0, amplitude =|A| and T=2π|ω|.

A is outside sine; ω multiplies x inside sine.

How

  1. Write any missing coefficient: −sin(...) means −1 × sin(...), and sin x means 1 × sin(1x).
  2. Copy A from outside sine and the entire ω from the factor multiplying x inside. Keep their signs here.
  3. Use |A| for amplitude and |ω| for the period calculation.
  4. Calculate T = 2π ÷ |ω|. Dividing by a fraction multiplies by its reciprocal, meaning its upside down version.
  5. Put T back into |ω|T = 2π to check the complete turn. The range is [−|A|, |A|].

Worked example

Worked example

A buoy in long swells: read A and ω before the arithmetic

A marker buoy rides long ocean swells. Its height above its calm-water level, in meters, x seconds after a lifeguard starts a stopwatch, is modeled by y = −sin(2x5). A negative y means the buoy is below calm-water level. Match the model to y = A sin(ωx) and state A and ω before doing any arithmetic. Then find the amplitude, the period T (the time for one complete cycle) and the range of the buoy's heights.

Show the steps and the answer
  1. Write the hidden coefficients: y=−sin(2x5) is y=−1×sin(25×x).A minus sign in front of sin with no number shown means −1 × sin(...). Inside, 2x5 means 2x ÷ 5, which equals 25 × x. So the number multiplying x is the fraction 25.
  2. Copy the coefficients with their signs: A=−1 (outside sine) and ω=25 (the entire factor multiplying x inside sine).The rule needs the whole factor on x, not just the 2 on top or the 5 underneath. Reading ω as 2 or as 5 would give the wrong period. Writing A = −1 with its sign records exactly what the model says before deciding what the sign does.
  3. Amplitude =|A|=|−1|=1 m. For the period, use |ω|=25.Amplitude is a distance from the center line (calm-water level), so it is never negative. The minus sign only flips the wave: the buoy dips first instead of rising first, but it still moves 1 m each way. ω is already positive, so |ω| is the same number.
  4. T=2π÷|ω|=2π÷25=2π×52=10π2=5πs≈15.7 s.Dividing by the fraction 25 is the same as multiplying by its reciprocal 52, which is the fraction turned upside down. Because |ω| is less than 1, the cycle is stretched to longer than 2π.
  5. Check the complete turn: |ω|T=25×5π=10π5=2π✓. Range =[−|A|,|A|]=[−1,1].Over one period the input to sine, 25x, must grow by exactly 2π, which is one complete turn. It does, so T = 5π is right. The outputs of sine stay between −1 and 1, and multiplying by A = −1 only swaps their signs. So y also stays between −1 and 1, which means the buoy is never more than 1 m below or above calm-water level.
Answer
A = −1 and ω = 25. Amplitude = 1 m, period T = 5π s ≈ 15.7 s, range [−1, 1]. The buoy's height stays between 1 m below and 1 m above calm-water level.
Double-check A quarter of a period in, at x = 5π4 ≈ 3.9 s, the input is 25 × 5π4 = π2, so y = −sin(π2) = −1, the lowest point. At x = 15π4 ≈ 11.8 s the input is 3π2, so y = −sin(3π2) = 1, the highest point. At x = 5π the input is 2π, so y = −sin(2π) = 0 and the pattern starts over. The extremes −1 and 1 match the range, and the cycle closes at 5π. About 15.7 s per swell suits long ocean swells. The misreadings ω = 2 (T = π ≈ 3.1 s) and ω = 5 (T = 2π5 ≈ 1.3 s) would be far too quick.

Work to write

  1. y = −1 × sin(25x), so A = −1 and ω = 25
  2. amplitude = |A| = |−1| = 1 m
  3. T=2π÷25=2π×52=5πs≈15.7s
  4. check: 25 × 5π = 2π
  5. range = [−1, 1] (from 1 m below to 1 m above calm-water level)

The trap

Using the outside number as period, or treating π as decoration inside sine. Copy A and the entire ω before applying their separate formulas.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

Negative height and fractional width

Find amplitude and period of y = −34 sin(27x). Both answers are positive lengths.

Show the steps and the answer
amplitude 0.75one periodπ3π5π7π−0.500.5
y=−0.75sin0.2857x.
  1. A=−34 and ω=27.Outside and inside fractions have separate jobs.
  2. Amplitude =34.The negative sign reflects heights, but distance is positive.
  3. T=2π÷27=2π×72=7π.Flip the divisor and cancel the factor 2.
  4. Put T back: 27×7π=2π.This confirms the proposed period.
Answer
  • Amplitude = 34.
  • Period = 7π.
Double-check At x = 7π4, the inside angle is π2 and y = −34. Three times that input gives y = 34, confirming both extremes.

4.5 5. Cofunctions: change the partner and subtract the angle

Open the full lesson

The rule

Wherever both sides are defined: sinx=cos(π2−x),cosx=sin(π2−x),tanx=cot(π2−x),cotx=tan(π2−x),secx=csc(π2−x), and cscx=sec(π2−x).

For degree angles, replace π2 with 90° throughout.

How

  1. Choose the partner: sine with cosine, tangent with cotangent, or secant with cosecant.
  2. Use 90° for degree angles and π2 for radian angles.
  3. Subtract the old angle from that quarter turn. For radian fractions, make the denominators match first.
  4. Write the partner at the resulting angle. Keep any negative result.
  5. Add the old and new arguments to check their quarter turn sum. Check that both functions are defined.

Worked example

Worked example

Secant to cosecant when the angle is past a quarter turn

The figure shows the angle 4π5 radians, which is 144°, in standard position. Use a cofunction identity to rewrite sec(4π5) as the cosecant of a single angle in radians. Write that angle as a fraction of π in lowest terms. Show the subtraction with matching denominators. Then check that the old and new angles add to a quarter turn and that both functions are defined.

The angle 4π5 radians (144°) drawn in standard position.
Show the steps and the answer
  1. Choose the partner. Secant pairs with cosecant, so the answer will have the form csc(new angle).The cofunction pairs are sine with cosine, tangent with cotangent, and secant with cosecant. The rule sec x = csc(π2 − x) turns a secant into a cosecant.
  2. Use the quarter turn π2: sec(4π5)=csc(π2−4π5).4π5 is a radian measure, so the quarter turn must be in radians too. The 144° in the figure is the same angle, but 90° − 4π5 would mix degrees with radians.
  3. Make the denominators match: π2=5π10 and 4π5=8π10.Fractions can be subtracted only over a common denominator. 10 is the least common multiple of 2 and 5, so multiply the top and bottom of π2 by 5, and the top and bottom of 4π5 by 2.
  4. Subtract the old angle from the quarter turn: π2−4π5=5π10−8π10=−3π10.The rule is quarter turn minus old angle, in that order. 8π10 is larger than 5π10, and the figure shows the angle already past a quarter turn, so the difference is negative. Reversing the order would give 3π10, which has the wrong sign. 3π10 is in lowest terms because 3 and 10 have no common factor.
  5. Write the partner at the new angle and keep the sign: sec(4π5)=csc(−3π10).The partner is evaluated at exactly the result of the subtraction, minus sign included. Dropping the sign would change the value. sec(4π5) is negative because cosine is negative in Quadrant II. csc(3π10) is positive because 3π10 lies in Quadrant I, where sine is positive.
  6. Check the quarter-turn sum: 4π5+(−3π10)=8π10−3π10=5π10=π2.The old and new arguments of a cofunction pair always add to a quarter turn. Getting exactly π2 confirms both the subtraction and its sign.
  7. Check that both functions are defined. Because π2<4π5<π, the angle 4π5 ends inside Quadrant II, off the y-axis, so cos(4π5)≠0. Because −π2<−3π10<0, the angle −3π10 ends inside Quadrant IV, off the x-axis, so sin(−3π10)≠0.The identity holds only where both sides are defined. sec x = 1cosx needs cos x ≠ 0, and csc x = 1sinx needs sin x ≠ 0. An angle whose terminal side lies strictly inside a quadrant has nonzero sine and nonzero cosine.
Answer
sec(4π5) = csc(−3π10)
Double-check Sum: 4π5 + (−3π10) = 8π10 − 3π10 = 5π10 = π2, a quarter turn. Defined: neither angle ends on an axis, so cos(4π5) ≠ 0 and sin(−3π10) ≠ 0. Calculator in radian mode: cos(4π5) ≈ −0.8090, so sec(4π5) ≈ −1.2361. Also sin(−3π10) ≈ −0.8090, so csc(−3π10) ≈ −1.2361. The two sides agree, sign included.

Work to write

  1. sec(4π5) = csc(π2 − 4π5)
  2. π2−4π5=5π10−8π10=−3π10
  3. sec(4π5) = csc(−3π10)
  4. Check: 4π5 + (−3π10) = 8π10 − 3π10 = 5π10 = π2
  5. cos(4π5) ≠ 0 and sin(−3π10) ≠ 0, so both sides are defined

The trap

Changing the function name but keeping the old angle, or subtracting radians from 90°. Change name and argument, using one angle unit throughout.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

A radian common denominator

Rewrite cot(π10) as tangent. The partner argument must be in radians.

Show the steps and the answer
π/102π/5sum = 90°
90° split into 18° and 72°, labelled π/10 and 2π/5.
  1. Choose tangent and set π10+β=π2.The arguments total a radian quarter turn.
  2. β=5π10−π10=4π10=2π5.Rewrite the quarter turn in tenths, subtract, and reduce by 2.
  3. Put it back: π10+2π5=5π10=π2.This verifies the missing argument.
  4. cot(π10)=tan(2π5).Both acute arguments have nonzero denominators.
Answer
cot(π10) = tan(2π5).
Double-check Reverse the subtraction: π2 − 2π5 = π10.

4.6 6. Cosine starts at the top and shares the same wave shape

Open the full lesson

The rule

y=cosx has domain (−∞,∞), range [−1,1], period 2π, and cos(−x)=cosx.

It begins at (0, 1). Also cosx=sin(x+π2), a shift of sine π2 left. For Acos(ωx), amplitude =|A| and T=2π|ω| when A≠0 and ω≠0.

How

  1. Start the parent cosine graph at (0, 1), then read the unit circle's horizontal coordinate at each quarter turn.
  2. For A cos(ωx), read the outside A and inside ω as for sine. Use |A| for amplitude and 2π ÷ |ω| for period.
  3. Keep midline y = 0 and range [−|A|, |A|]. A negative A changes the start from the top to the bottom.
  4. Compare opposite inputs using cos(−u) = cos u. Equal outputs give symmetry about the y-axis. An Even function has equal outputs at opposite inputs. Symmetry about the y-axis means (x, y) matches (−x, y), so the left and right halves mirror each other.
  5. To compare with sine, use cos x = sin(x + π2). Each old sine feature occurs π2 earlier, so the graph moves left.

Worked example

Worked example

The same height and width formulas for cosine

For y = −43 cos(35x), find amplitude, period, range, starting point, and whether opposite inputs give equal outputs. This asks for size, repetition length, achieved heights, and mirror symmetry.

Show the steps and the answer
amplitude 1.33333one periodrange−2π2π−11
y=−1.3333cos0.6x.
  1. A=−43 and ω=35.The outside coefficient multiplies output, and the inside coefficient multiplies input.
  2. Amplitude =|−43|=43.Amplitude is a distance, even when the coefficient is negative.
  3. T=2π÷35=2π×53=10π3.The inside angle needs a full turn; divide by its coefficient using the reciprocal.
  4. Put T back: 35×10π3=2π.This verifies the proposed input length for a full turn.
  5. Range =[−43,43].Multiplying cosine's two endpoints −1 and 1 by the coefficient gives the two extreme heights.
  6. At x=0,y=−43cos0=−43, so the start is (0,−43).The parent cosine output is 1, and the outside minus sends it to the bottom.
  7. At −x,y=−43cos(−35x)=−43cos(35x).Cosine is even, so changing the entire angle's sign leaves its output unchanged.
Answer
  • Amplitude = 43.
  • Period = 10π3.
  • Range = [−43, 43].
  • Starting point = (0, −43).
  • The function is even, with symmetry about the y-axis.
Double-check At half a period, x = 5π3, the inside angle is π, so y = −43 × (−1) = 43. This reaches the other endpoint of the range and confirms the bottom start.

The trap

Starting cosine at the origin, or confusing cos(−x) with −cos x. Cosine starts at (0, 1). Changing its input sign leaves output unchanged, while an outside minus reflects its heights.

Quick check

Try it before you open its steps. It is question 1 of 1 in the full lesson, where they run from easy to exam-hard.

Try it · level 1 of 1

A quarter cycle of a faster wave

Explain how y = 3 cos(2x) comes from y = 3 sin(2x) by moving the sine graph sideways. Find the leftward distance and verify where the first sine top moves. This asks for a graph movement, rather than a change in height.

moved topamplitude 3one period−π/2π/2π−22
A faster wave moves left by π over 4 to reach the cosine starting point.
Show the steps and the answer
  1. Use the quarter-turn identity with angle 2x: 3cos(2x)=3sin(2x+π2).The identity holds for every angle, so the entire angle 2x can replace x in it. Multiplying both equal outputs by 3 preserves equality.
  2. Write 2x+π2=2(x+π4).Distributing 2 gives 2x + 2π4, which is the original expression. A change of π4 in x changes the inside angle by π2.
  3. For the old sine top, solve 2x=π2 to get x=π4. Put it back: 2×π4=π2.The parent top occurs when its inside angle reaches a quarter turn. This finds and verifies the original input location.
  4. For the shifted top, solve 2x+π2=π2: subtract π2, then divide by 2 to get x=0. Put it back: 2×0+π2=π2.The new graph reaches the same top angle at an earlier input. Solving the inside-angle equation locates that moved feature.
  5. The top moves from (π4,3) to (0, 3), so the shift is π4 left. T=2π2=π, and T4=π4.The heights stay fixed during a horizontal move. This distance is a quarter of the faster wave's period.
Answer
  • 3cos(2x)=3sin(2(x+π4)).
  • The shift is π4 left.
  • The first sine top moves from (π4, 3) to (0, 3).
Double-check Direct cosine substitution gives 3 cos 0 = 3 at the new top. At x = π4, cosine gives 3 cos(π2) = 0; the shifted sine gives 3 sin(π) = 0 as well. The period check 2 × π = 2π confirms that the leftward distance is one quarter cycle.

4.7 7. Sketch a complete cycle with five key points

Open the full lesson

The rule

For A≠0 and ω>0,y=Asin(ωx) or y=Acos(ωx) has T=2πω.

Use the input columns 0, T4,T2,3T4, T in the key-point picture. Multiply the parent heights by A, connect smoothly, and repeat every T.

How

  1. Check A and ω for zero. If the graph is nonconstant and ω is negative, rewrite using sin(−u) = −sin u or cos(−u) = cos u to obtain positive ω. Then copy the resulting signed A and positive ω. Find amplitude |A| and T = 2πω.
  2. Divide T by 4 to find the quarter period. Put its successive multiples in an input/output table.
  3. Use the sine or cosine parent heights and multiply each by A. The table is the point-plotting plan.
  4. Draw each column as an ordered pair. Join the points smoothly, with rounded tops and bottoms.
  5. If the requested interval spans several cycles, copy the points by adding or subtracting T from each input. Do not change their heights.

Worked example

Worked example

A complete reflected sine cycle

Sketch y = −4 sin(23x) for 0 ≤ x ≤ 3π. This asks you to draw one whole wave, with its five key points, and state its amplitude and period.

Show the steps and the answer
(0, 0)(3π/4, −4)(3π/2, 0)(9π/4, 4)(3π, 0)amplitude 4one periodπ2π3π−4−224
The same picture again: y = −4 sin 0.6667x.
input xoutput y003π/4−43π/209π/443π0
x:0,3π4,3π2,9π4,3π;y:0,−4,0,4,0.
  1. Read A=−4 and ω=23. The amplitude is |−4|=4.A multiplies the output, so the negative sign reflects the wave while the distance from its middle remains positive.
  2. Find T=2π÷23=2π×32=3π.A full cycle makes the inside angle advance by 2π.
  3. Find the quarter period: T4=3π4. Use successive multiples of this spacing in the table. Start with 0. One gap gives 3π4. Two gaps give 6π4=3π2. Three gaps give 9π4. Four gaps give 12π4=3π. These are the input columns in the picture.Four equal steps span one whole period.
  4. Multiply the sine heights by −4. The table shows the reflected heights in their matching columns.The sine quarter-turn heights are shown in the pattern table. Multiplying each height by −4 reflects it across the middle line.
  5. Plot the table columns as ordered pairs and join them with a smooth curve. Begin at the middle and travel downward.The sine function changes continuously between its key points; straight segments would change the shape.
Answer
  • Amplitude = 4
  • Period T = 3π
  • Quarter period = 3π4
  • One cycle begins at the middle going down and returns to the middle going down at x = 3π.
Double-check Check by direct substitution, using the circle values rather than the sketch. The inside products are 23 × 0 = 0, 23 × 3π4 = π2, 23 × 3π2 = π, 23 × 9π4 = 3π2, and 23 × 3π = 2π. Thus the outputs are −4 × 0 = 0, −4 × 1 = −4, −4 × 0 = 0, −4 × (−1) = 4, and −4 × 0 = 0. The extremes give 4−(−4)2 = 4, and ωT = 23 × 3π = 2π.

The trap

Drawing straight segments between the key points makes a zigzag. These points locate a smooth sinusoidal function, so round the turns and cross the middle smoothly.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

A wider cosine cycle

Sketch y = cos(15x) on 0 ≤ x ≤ 10π. You are stretching the cosine cycle horizontally while keeping its height unchanged.

Show the steps and the answer
(0, 1)(5π/2, 0)(5π, −1)(15π/2, 0)(10π, 1)amplitude 1one periodπ3π5π7π9π−11
y = cos 0.2x.
input xoutput y015π/205π−115π/2010π1
x:0,5π2,5π,15π2,10π;y:1,0,−1,0,1.
  1. Read A=1 and ω=15. Amplitude =1.Only the inside coefficient changed.
  2. Find T=2π÷15=2π×5=10π.Dividing by one fifth multiplies by five.
  3. Compute T4=10π4=5π2. Use the table's input columns.Each horizontal step is a quarter of the new width.
  4. Use the ordinary cosine outputs and join the five points smoothly.An inside multiplier moves the x-locations but does not multiply the output heights.
Answer
  • Amplitude = 1
  • Period = 10π
  • Quarter period = 5π2
  • The cycle starts at the top.
Double-check Substitute the table inputs: 15 × 0 = 0, 15 × 5π2 = π2, 15 × 5π = π, 15 × 15π2 = 3π2, and 15 × 10π = 2π. Their cosine outputs match the table. The extremes give 1−(−1)2 = 1, and ωT = 15 × 10π = 2π.

4.8 8. Read a wave and write its equation

Open the full lesson

The rule

For nonconstant y=Asin(ωx) or y=Acos(ωx), centered at y=0 with ω>0, amplitude a=maximum−minimum2 and ω=2πT.

At x=0: middle up chooses a sin; middle down chooses −asin; top chooses a cos; bottom chooses −acos.

How

  1. Confirm that the midline is y = 0 and that the problem uses an unshifted sine or cosine wave. This is the family the four-start method identifies.
  2. Find the amplitude from half the vertical span. It is positive for a changing wave.
  3. At x = 0, choose sine or cosine and the sign of A from the starting height and direction. Set |A| equal to the amplitude.
  4. Measure the horizontal distance from one point to the next matching point with the same direction. That distance is T.
  5. Solve ωT = 2π by dividing both sides by T. Choose ω = 2πT > 0 and write the equation.
  6. Substitute the five quarter-period inputs into the equation. Compare all five outputs with the graph, and verify ωT = 2π.

Worked example

Worked example

Read a bottom-start graph with a plain-number period

The pictured unshifted wave centered at y = 0 has a maximum of 8, a minimum of −8, a full cycle of 10, and is at the bottom at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.

Show the steps and the answer
(0, −8)(5/2, 0)(5, 8)(15/2, 0)(10, −8)amplitude 8one periodπ2π3π−8−448
The same picture, shown 4 times now: y = −8 cos 0.6283x.
input xoutput y0−85/205815/2010−8
x:0,52,5,152,10;y:−8,0,8,0,−8.
  1. Confirm that the highest and lowest heights are 8 and −8. Their middle is y=0.Their sum is zero, so 8+(−8)2 = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
  2. Find the amplitude: 8−(−8)2=162=8.The distance from bottom to top contains two equal amplitudes.
  3. At x=0 the graph is at the bottom. Choose negative cosine, so A=−8.Cosine at zero is 1, so A cos 0 = A. The start is the minimum, −8.
  4. Read one complete repeat as T=10. Find ω=2π10=π5. Choose ω>0.A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
  5. Write y=−8cos(π5x).The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
  6. For a second check, split the period into quarters: T4=52. Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
Answer
  • Amplitude = 8
  • Period T = 10
  • ω=π5
  • y=−8cos(π5x)
Double-check Check by substituting instead of reading the graph. The inside products are π5 × 0 = 0, π5 × 52 = π2, π5 × 5 = π, π5 × 152 = 3π2, and π5 × 10 = 2π. Thus −8 cos 0 = −8, −8 cos(π2) = 0, −8 cos π = 8, −8 cos(3π2) = 0, and −8 cos(2π) = −8. These match all five table columns. The extremes of the equation are 8 and −8, so half their difference returns 8. Also π5 × 10 = 2π verifies both the solved ω and the measured period.

The trap

The four-start method assumes an unshifted wave centered at y = 0 and a positive ω. A wave with another midline or an arbitrary horizontal shift needs the later transformation method.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

Bottom start and a plain-number period

The pictured unshifted wave centered at y = 0 has a maximum of 8, a minimum of −8, a full cycle of 10, and is at the bottom at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.

Show the steps and the answer
(0, −8)(5/2, 0)(5, 8)(15/2, 0)(10, −8)amplitude 8one periodπ2π3π−8−448
The same picture, shown 5 times now: y = −8 cos 0.6283x.
input xoutput y0−85/205815/2010−8
The same picture again: x: 0, 52, 5, 152, 10; y: −8, 0, 8, 0, −8.
  1. Confirm that the highest and lowest heights are 8 and −8. Their middle is y=0.Their sum is zero, so 8+(−8)2 = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
  2. Find the amplitude: 8−(−8)2=162=8.The distance from bottom to top contains two equal amplitudes.
  3. At x=0 the graph is at the bottom. Choose negative cosine, so A=−8.Cosine at zero is 1, so A cos 0 = A. The start is the minimum, −8.
  4. Read one complete repeat as T=10. Find ω=2π10=π5. Choose ω>0.A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
  5. Write y=−8cos(π5x).The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
  6. For a second check, split the period into quarters: T4=52. Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
Answer
  • Amplitude = 8
  • Period T = 10
  • ω=π5
  • y=−8cos(π5x)
Double-check Check by substituting instead of reading the graph. The inside products are π5 × 0 = 0, π5 × 52 = π2, π5 × 5 = π, π5 × 152 = 3π2, and π5 × 10 = 2π. Thus −8 cos 0 = −8, −8 cos(π2) = 0, −8 cos π = 8, −8 cos(3π2) = 0, and −8 cos(2π) = −8. These match all five table columns. The extremes of the equation are 8 and −8, so half their difference returns 8. Also π5 × 10 = 2π verifies both the solved ω and the measured period.

5 Graphs of the other four functions

about 27 min9 lessonsOpen the unit's crash course

5.1 Four formulas and the inputs they must skip

about 1 minOpen the full lesson

The rule

tanx=sinxcosx; cotx=cosxsinx; secx=1cosx; cscx=1sinx.

For tan and sec, require x≠π2+nπ; for cot and csc, require x≠nπ, with n any integer.

How

  1. Write the formula as a fraction because the denominator identifies the restriction.
  2. Set the denominator equal to 0 to find the inputs that would make the division impossible.
  3. Read those angles from the unit circle and substitute them back into the denominator to verify it is 0.
  4. Exclude those inputs. Keep a zero numerator when the denominator is nonzero.

Worked example

Worked example

Which machines accept a quarter-turn?

In plain words, use one angle to decide which machines have a number to return. Find tan, cot, sec and csc at x = π2.

Show the steps and the answer
x = cos θy = sin θ(0, 1)
The zero horizontal coordinate excludes tan and sec; the height 1 allows cot and csc.
  1. The point at π2 is (0, 1), so cos(π2)=0 and sin(π2)=1.The first coordinate is cosine and the second is sine.
  2. tan(π2)=10 and sec(π2)=10, so both are undefined.Their common denominator, cosine, is 0. This verifies why the angle is excluded.
  3. cot(π2)=01=0 and csc(π2)=11=1.Their denominator, sine, is 1, so both divisions are permitted.
Answer
  • tan(π2): undefined.
  • cot(π2): 0.
  • sec(π2): undefined.
  • csc(π2): 1.
Double-check At a vertical-axis angle, the two cosine-bottom functions fail and the two sine-bottom functions remain defined, exactly as the rule predicts.

The trap

A zero on the top is not a break. Check the bottom first: 01 = 0, while 10 is undefined.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Zero on the bottom

In plain words, decide whether a half-turn has a cosecant output. Find csc π.

Show the steps and the answer
domainπ/2π3π/22π−4−224
y = csc x, for x from 0.1 to 6.4.
  1. sinπ=0, so cscπ would be 10.The point at π is (−1, 0).
  2. Exclude x=π.This is a verified sine zero, so the fraction has no output.
Answer
csc π is undefined.
Double-check π = nπ with n = 1, so the input belongs to the sine-zero family.

5.2 Range: the output heights each graph can reach

about 2 minOpen the full lesson

The rule

tan x and cot x have range (−∞,∞).

sec x and csc x have range (−∞,−1]∪[1,∞), meaning y≤−1 or y≥1.

How

  1. Identify whether you have a quotient function or a reciprocal-of-sine-or-cosine function.
  2. For tangent or cotangent, accept any real output because every height occurs.
  3. For secant or cosecant, keep outputs at or below −1 and at or above 1.
  4. Include −1 and 1; exclude only the open middle band −1 < y < 1.

Worked example

Worked example

Which proposed secant heights are possible?

In plain words, check four proposed heights against the range. Decide whether sec x can equal 1, −2, 0 or 12.

Show the steps and the answer
−2−101/21(−∞, −1] ∪ [1, ∞)
The two allowed pieces contain 1 and −2, while the middle candidates lie in the gap.
  1. Keep 1 because sec0=1cos0=11=1.The endpoint 1 is included, and input 0 gives it.
  2. Keep −2 because cos(2π3)=−12, so sec(2π3)=1÷(−12)=−2.A reciprocal retains the negative sign. Reflection of the 60° circle point into the upper-left region changes cosine to −12.
  3. Reject 0 because 1 divided by a finite nonzero number cannot be zero.If the reciprocal equaled 0, multiplying by its denominator would give 1 = 0.
  4. Reject 12 because it would require cosx=2, outside cosine's possible coordinates.Taking the reciprocal back checks whether the proposed output could have a valid denominator.
Answer
  • 1: possible.
  • −2: possible.
  • 0: impossible.
  • 12: impossible.
Double-check The permitted heights satisfy y ≤ −1 or y ≥ 1; the two rejected heights lie in the gap.

The trap

Excluding ±1 along with the middle band. The gap is open: −1 < y < 1. At the edges, reciprocal values are still ±1.

5.3 Even and odd: how the picture balances

about 2 minOpen the full lesson

The rule

sec(−x)=secx is even, with y-axis symmetry.

tan(−x)=−tanx,cot(−x)=−cotx and csc(−x)=−cscx are odd, with origin symmetry. In each identity, x and −x must both be allowed inputs.

How

  1. Check that the input is allowed before using symmetry.
  2. If the function is secant, negate the input and keep the output height.
  3. If it is tangent, cotangent or cosecant, negate both input and output.
  4. On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.

Worked example

Worked example

Same input distance, different symmetry

In plain words, predict the heights at the mirror input without rebuilding the circle each time. Find sec(−π4) and tan(−π4) using the positive-angle values.

Show the steps and the answer
same heightsame height−2π−ππ2π−4−224
y = sec x, its points labelled “same height”.
  1. sec(π4)=1÷22=2, and tan(π4)=1.The equal positive circle coordinates give tangent 1 and the refreshed reciprocal gives secant 2.
  2. sec(−π4)=2.Even symmetry keeps the output height when the input changes sign.
  3. tan(−π4)=−1.Odd symmetry changes the output sign when the input changes sign.
Answer
  • sec(−π4) = 2.
  • tan(−π4)=−1.
Double-check Directly at −π4, cosine is 22 and sine is −22, so the reciprocal is 2 and the quotient is −1.

The trap

Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.

5.4 Period: copy the right-sized piece

about 2 minOpen the full lesson

The rule

tan(x+π)=tanx and cot(x+π)=cotx.

sec(x+2π)=secx and csc(x+2π)=cscx. Their fundamental periods are π,π,2π and 2π respectively.

How

  1. Select π for tangent or cotangent and 2π for secant or cosecant.
  2. Sketch a complete piece of that width, keeping excluded endpoints out of the graph.
  3. Copy its points and breaks left and right by integer multiples of the period.
  4. For an exact value, add or subtract complete periods to reach a known allowed input.

Worked example

Worked example

Use a period to reach a familiar input

In plain words, remove complete repeating pieces until each input is an angle you know. Find tan(9π4) and csc(5π2).

Show the steps and the answer
knownone period laterπ/23π/25π/2−4−224
y = csc x, for x from 0 to 8.3.
  1. 9π4−2π=9π4−8π4=π4.2π is two tangent periods, so subtracting it preserves tangent's output.
  2. tan(9π4)=tan(π4)=1.The remaining input has equal positive sine and cosine.
  3. 5π2−2π=5π2−4π2=π2.2π is one cosecant period, so subtracting it preserves cosecant's output.
  4. csc(5π2)=csc(π2)=1.The remaining input has sine 1, whose reciprocal is 1.
Answer
  • tan(9π4)=1.
  • csc(5π2) = 1.
Double-check Both original inputs end at the same circle points as the reduced inputs after complete turns. Their denominators are nonzero, so each calculation is permitted.

The trap

Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Move a negative input to a familiar angle

Find tan(−7π4). In plain words, add complete tangent repeats until the input becomes a familiar positive angle.

Show the steps and the answer
−7π/4terminal sideinitial side
The clockwise turn ends on the same ray as 45°.
  1. Add 2π=8π4: −7π4+2π=π4.Two tangent periods preserve the output and make the remaining angle familiar.
  2. At π4, sine and cosine are both 22, so tangent is 1.Equal nonzero numbers divide to 1.
Answer
tan(−7π4)=1.
Double-check The original angle reaches the same unit-circle point as π4 after a full turn; its cosine is nonzero, confirming that evaluation is allowed.

5.5 Tangent and the meaning of a vertical asymptote

about 8 minOpen the full lesson

The rule

tanx=sinxcosx, with x≠π2+nπ for every integer n.

The vertical asymptotes are x=π2+nπ.Each branch is continuous and increasing; the central branch is on (−π2,π2) and the pattern repeats every π.

How

  1. Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.
  2. For the central branch, use x = −π2 and x = π2. Check cos(−π2) = 0 and cos(π2) = 0 before drawing the dashed vertical lines.
  3. Plot (−π4, −1), (0, 0), and (π4, 1), using the exact unit-circle values in the worked example's three-column table.
  4. Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.
  5. Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.

Worked example

Worked example

The tangent branch through (π, 0) and its vertical asymptotes

Graph the branch of y = tan x that passes through the point (π, 0). The three-column table gives exact values on this branch: tan(3π4) = −1, tan(π) = 0 and tan(5π4) = 1. The table lists the inputs as multiples of π, so 0.75, 1 and 1.25 stand for 3π4, π and 5π4. (a) Use cos x = 0 to find the two vertical asymptotes that bound this branch, and check that cos x = 0 at each one. (b) Confirm the three table values from the unit-circle values of sin x and cos x, then plot the three points. (c) Describe what the graph does as x approaches each asymptote from inside the branch, and explain why the graph never meets the line x = 3π2. (d) Copy the branch π units left and π units right, and list every vertical asymptote in the three-branch sketch.

Show the steps and the answer
input x (as a multiple of π)output tan x0.75−1101.251↓ evaluate: input given, read the output below it
Three-column table for the branch of y = tan x through (π, 0).
  1. Solve cosx=0. On the unit circle, cos x is 0 only at the top point (0, 1) and the bottom point (0,−1), so x=π2+nπ for every integer n: …, −π2,π2,3π2,5π2, … The nearest of these on each side of π are x=π2 on the left and x=3π2 on the right.tan x = sinxcosx, so any input that makes the denominator cos x equal 0 has no tangent value and must be excluded. The branch through (π, 0) runs from the nearest excluded input on the left of π to the nearest excluded input on the right of π.
  2. Check both boundary inputs before drawing: cos(π2)=0 (with sin(π2)=1) and cos(3π2)=0 (with sin(3π2)=−1). Then draw dashed vertical lines x=π2 and x=3π2. They are 3π2−π2=π apart, which is the width of one branch.A dashed line belongs only where the denominator really is 0. Do not draw one where sin x = 0. At x = π, tan(π) = 0 ÷ (−1) = 0, so that input gives a point on the graph and does not give an asymptote.
  3. Confirm the table with exact unit-circle values. At 3π4: cosx=−22 and sinx=22, so tan(3π4)=22÷(−22)=−1. At π: cosx=−1 and sinx=0, so tan(π)=0÷(−1)=0. At 5π4: cosx=−22 and sinx=−22, so tan(5π4)=(−22)÷(−22)=1. Plot (3π4,−1),(π,0) and (5π4,1).Exact values give exact points. 3π4 is halfway between π2 and π, and 5π4 is halfway between π and 3π2. The three points therefore mark the center of the branch and one point on each side of it.
  4. Find the sign of tan x close to each line. Just right of π2 (Quadrant II), sin x is close to 1 and cos x is a small negative number, so the quotient is a large negative number. Just left of 3π2 (Quadrant III), sin x is close to −1 and cos x is a small negative number, so the quotient is a large positive number.Dividing a number near 1 or −1 by a number shrinking toward 0 gives outputs that grow past any bound. The signs of sin x and cos x decide whether the curve heads down or up.
  5. Draw one smooth rising curve through the three points. As x approaches π2 from the right, the curve drops without bound beside that dashed line. As x approaches 3π2 from the left, the curve rises without bound beside the other dashed line. The curve gets ever closer to each line but never touches or crosses it.Each branch of tangent is continuous and increasing on its open interval. The inputs x = π2 and x = 3π2 are outside the domain, so no point of the graph can lie on those lines. That is the meaning of a vertical asymptote: an excluded input where the outputs grow without bound as the inputs close in on it.
  6. Copy the branch π units left and π units right. Subtract π from each point to get (−π4,−1), (0, 0) and (π4,1) between x=−π2 and x=π2. Add π to each point to get (7π4,−1),(2π,0) and (9π4,1) between x=3π2 and x=5π2. Draw the new dashed lines x=−π2 and x=5π2, and keep every curve separate from every line.Tangent repeats every π, so tan(x + π) = tan x and tan(x − π) = tan x. Moving every point of one branch by π gives the neighboring branch. Moving a line x = π2 + nπ by π gives another line of the same form.
Answer
The branch lies between the vertical asymptotes x = π2 and x = 3π2, where cos x = 0. It passes through (3π4, −1), (π, 0) and (5π4, 1) and rises from left to right. It drops without bound as x approaches π2 from the right and rises without bound as x approaches 3π2 from the left. It never meets x = 3π2 because cos(3π2) = 0, which leaves tan x = sinxcosx undefined there. The three-branch sketch has vertical asymptotes x = −π2, x = π2, x = 3π2 and x = 5π2. The copied branches pass through (−π4, −1), (0, 0), (π4, 1) and through (7π4, −1), (2π, 0), (9π4, 1).
Double-check Shift check: 3π4 − π = −π4, and tan(−π4) = (−22) ÷ 22 = −1, which matches tan(3π4). Also 5π4 − π = π4, and tan(π4) = 1, which matches tan(5π4). Rising check: the outputs −1, 0, 1 increase as the inputs 3π4, π, 5π4 increase. Asymptote check on a calculator in radian mode: π2 ≈ 1.571 and tan(1.6) ≈ −34.23, a large negative value just right of the left line. Also 3π2 ≈ 4.712 and tan(4.7) ≈ 80.71, a large positive value just left of the right line. Both match the drawn ends.

Work to write

  1. cos x = 0 when x = π2 + nπ, so the branch through (π, 0) lies between x = π2 and x = 3π2
  2. cos(π2) = 0 and cos(3π2) = 0, so the dashed asymptotes are x = π2 and x = 3π2
  3. tan(3π4)=22÷(−22)=−1
  4. tan(π)=0÷(−1)=0
  5. tan(5π4)=(−22)÷(−22)=1
  6. Plot (3π4, −1), (π, 0) and (5π4, 1), then draw one smooth rising curve through them
  7. As x approaches π2 from the right, tan x drops without bound; as x approaches 3π2 from the left, tan x rises without bound
  8. x = 3π2 is not in the domain because cos(3π2) = 0, so the graph never touches that line
  9. Copies: (−π4, −1), (0, 0), (π4, 1) and (7π4, −1), (2π, 0), (9π4, 1)
  10. Asymptotes in the sketch: x = −π2, x = π2, x = 3π2, x = 5π2

The trap

Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Add the quarter-π points

Add tan(−π4) and tan(π4) to the central sketch. This asks for the heights at the two inputs on either side of 0.

Show the steps and the answer
input x in radiansoutput tan x−π/4−100π/41↓ evaluate: input given, read the output below it
The highlighted radian inputs add the two heights beside the zero.
−101−π/2π/2−4−224
In radians, these three points lie on one rising branch.
  1. At π4, divide 22 by 22 to get 1.Sine and cosine are equal and nonzero there.
  2. At −π4, divide −22 by 22 to get −1.Sine is negative and cosine positive, with equal magnitudes.
  3. Plot (−π4,−1), (0, 0), and (π4,1), then connect them with a smooth rising curve inside the boundary lines.The accepted inputs and outputs in the table guide the continuous increasing branch.
Answer
  • tan(−π4)=−1.
  • tan(π4)=1.
  • Central branch: rises through the three points.
Double-check A half-turn about the origin sends (π4, 1) to (−π4, −1), which matches tangent's odd symmetry.

5.6 Cotangent: the branch that falls

Open the full lesson

The rule

cotx=cosxsinx, with x≠nπ for every integer n.

Its vertical asymptotes are x=nπ and its period is π.
On (0,π), the continuous decreasing branch passes through (π4,1),(π2,0), and (3π4,−1).

How

  1. Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.
  2. For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.
  3. Read the three table columns to plot (π4, 1), (π2, 0), and (3π4, −1).
  4. Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.
  5. Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.

Worked example

Worked example

The cotangent branch between π and 2π

Graph the branch of y = cot x that passes through the point (3π2, 0), then extend the graph using the period. The three-column table gives exact values on this branch: cot(4π3) = 33, cot(3π2) = 0 and cot(5π3) = −33. The table lists each input as a count of sixths of π, so 8, 9 and 10 stand for 8π6, 9π6 and 10π6. It rounds the outputs to two decimal places: 0.58, 0 and −0.58.

Show the steps and the answer
input x (sixths of π)output cot x (to 2 decimal places)80.589010−0.58↓ evaluate: input given, read the output below it
Table of y = cot x on the branch between π and 2π.
  1. Solve sinx=0. Sine is zero at x= …, −π, 0, π,2π,3π, …, which is x=nπ for every integer n. Exclude these inputs, so the domain of y=cotx is x≠nπ.cot x = cosxsinx has sin x in the denominator, and division by 0 is undefined. At x = nπ the numerator cos x is 1 or −1, not 0. So the size of the quotient grows without bound near x = nπ, which makes each line x = nπ a vertical asymptote.
  2. Since π<3π2<2π, the branch through (3π2,0) lies between π and 2π, two neighboring zeros of sine. Draw dashed vertical lines at x=π and x=2π. Plug the endpoints back into sine: sinπ=0 and sin2π=0.A cotangent branch runs from one asymptote to the next. No multiple of π lies strictly between π and 2π, so the curve is unbroken there. Checking sine at both endpoints confirms that the dashed lines sit exactly where the denominator is zero.
  3. Read the three table columns. Convert each input: 8π6=4π3,9π6=3π2 and 10π6=5π3. Pair them with the exact outputs 33, 0 and −33, which the table shows as 0.58, 0 and −0.58. Plot (4π3,33),(3π2,0) and (5π3,−33).The table counts sixths of π so that every input is a whole number. Dividing a count by 6 and simplifying turns it back into an angle. All three inputs lie between π and 2π. The zero sits exactly halfway between the asymptotes, because (π + 2π) ÷ 2 = 3π2.
  4. Draw one smooth curve through the three points that falls from left to right. On the right side of x=π the curve rises without bound along the dashed line. On the left side of x=2π it falls without bound.On the interval (π, 2π), sin x is negative. Just right of π, cos x is near −1 and sin x is a tiny negative number, so cosxsinx is a large positive number. Just left of 2π, cos x is near 1 and sin x is a tiny negative number, so the quotient is a large negative number. The table agrees: as x increases, the outputs go 33, then 0, then −33.
  5. Copy the branch every π units. Moving the three points π to the left gives (π3,33),(π2,0) and (2π3,−33) between x=0 and x=π. Moving them π to the right gives (7π3,33),(5π2,0) and (8π3,−33) between x=2π and x=3π. Draw a dashed asymptote at every x=nπ and keep each copy separate there.Cotangent has period π, so cot(x + π) = cot x. Every branch is therefore the same falling curve shifted by a multiple of π. The function is undefined at each x = nπ, so no copy is joined to its neighbor across an asymptote.
Answer
The branch lies between the dashed asymptotes x = π and x = 2π. It passes through (4π3, 33), (3π2, 0) and (5π3, −33) and falls from left to right. It rises without bound as x approaches π from the right and falls without bound as x approaches 2π from the left. The full graph repeats this branch between x = nπ and x = (n + 1)π for every integer n, with a dashed asymptote at each x = nπ.
Double-check Compute the table values from cot x = cosxsinx. First, cos(4π3) = −12 and sin(4π3) = −32, so cot(4π3) = (−12) ÷ (−32) = 13 = 33 ≈ 0.58. Next, cos(3π2) = 0 and sin(3π2) = −1, so cot(3π2) = 0. Last, cos(5π3) = 12 and sin(5π3) = −32, so cot(5π3) = −33 ≈ −0.58. The left copy also agrees with the rule's branch on (0, π). The point (π3, 33) falls between (π4, 1) and (π2, 0), and (2π3, −33) falls between (π2, 0) and (3π4, −1).

Work to write

  1. sin x = 0 at x = nπ, so cot x is undefined there: x ≠ nπ
  2. Asymptotes x = π and x = 2π; sin π = 0 and sin 2π = 0
  3. 8π6=4π3,9π6=3π2,10π6=5π3
  4. Plot (4π3, 33), (3π2, 0), (5π3, −33)
  5. Falling branch: rises without bound just right of x = π, falls without bound just left of x = 2π
  6. Period π: copy the branch between each x = nπ and x = (n + 1)π, kept separate at x = nπ

The trap

Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at π2 that gives the valid output 0.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Draw the positive half of the branch

Sketch cotangent for 0 < x ≤ π2, including its point at π4. This asks for the positive half of a branch and the midpoint zero, while excluding 0.

Show the steps and the answer
input x in radiansoutput cot x0undefinedπ/41π/20↓ evaluate: input given, read the output below it
The radian input 0 is excluded, while the highlighted columns provide two allowed points.
(π/4, 1)(π/2, 0)π/21234
The positive half-branch falls from the asymptote to its included zero at π2 radians.
  1. Exclude 0 because sin0=0; draw the dashed line x=0.Substitution finds and verifies the zero denominator at the left boundary.
  2. At π4, divide 22 by itself to get 1, then plot (π4,1).Equal nonzero cosine and sine values give the quotient 1.
  3. Include (π2,0) and draw a falling curve toward it from high positive heights near 0.The denominator is positive inside this half-interval, and the quotient decreases toward its allowed zero.
Answer
  • Excluded boundary: x = 0.
  • Points: (π4, 1), (π2, 0).
  • Shape: positive and falling on (0, π2), with the zero at π2 included.
Double-check Quadrant I has positive sine and cosine, so cotangent must stay positive before π2; the axis point at π2 supplies the included zero.

5.7 Cosecant: build a reciprocal graph from sine

Open the full lesson

The rule

cscx=1sinx, with x≠nπ for every integer n.

Its vertical asymptotes are x=nπ, its range is (−∞,−1]∪[1,∞), its period is 2π, and csc(−x)=−cscx.

How

  1. Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.
  2. Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.
  3. Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.
  4. Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.
  5. Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.

Worked example

Worked example

A complete cosecant period

You need the graph pieces across one full turn, including the locations where no point exists. Sketch y = csc x on 0 ≤ x ≤ 2π using sine as the guide.

Show the steps and the answer
(π/2, 1)(3π/2, −1)rangeπ/2π3π/22π−4−224
The same picture, shown 6 times now: y = csc x, solid, beside y = sin x, dashed, for y from −4 to 4.
input xoutput sin x00π/61/2π/215π/61/2π07π/6−1/23π/2−111π/6−1/22π0
Read each output directly below its input; the inputs are angles in radians and sin x is the output height.
input xoutput csc x0undefinedπ/62π/215π/62πundefined7π/6−23π/2−111π/6−22πundefined
Read each output directly below its input; the inputs are angles in radians and csc x is the output height.
  1. Draw the sine guide from x=0 to x=2π, using the sine fntable visual.The sine row gives the starting height under each angle, and the reciprocal construction keeps that angle fixed.
  2. Set sinx=0 to find denominator zeros: x=0,π,2π in this interval. Plug them back in: sin0=0,sinπ=0,sin2π=0.This finds the inputs that cannot be used in 1sinx, so each gets an asymptote and no cosecant point.
  3. Keep (π2,1) and (3π2,−1).The sine guide has height 1 and −1 there, and 11 = 1 while 1−1 = −1.
  4. Read the columns under π6 and 5π6 in the sine table. Replace their 12 heights by 1÷12=2.These two reciprocal points guide the positive branch on (0, π). Rebuild the farther input: 5π6 = π − π6, so reflection across the vertical axis keeps sine 12.
  5. Read the columns under 7π6 and 11π6. Replace their −12 heights by 1÷(−12)=−2.A positive numerator divided by a negative denominator gives a negative output, guiding the negative branch on (π, 2π). Here 7π6 = π + π6, so a half-turn reverses sine. Also 11π6 = 2π − π6, so reflecting to −π6 and adding a full turn gives the same negative sine.
  6. Draw an upward-opening curved branch through (π2,1), and a downward-opening curved branch through (3π2,−1), approaching their boundary lines.As sine approaches zero from the branch's sign, the reciprocal magnitude grows without bound. Neither branch enters −1 < y < 1.
Answer
  • Asymptotes in the interval: x = 0, π, 2π.
  • Positive branch: 0 < x < π, vertex (π2, 1).
  • Negative branch: π < x < 2π, vertex (3π2, −1).
  • Repeat the pattern every 2π.
Double-check Independent symmetry check: the point (π6, 2) turns about the origin into (−π6, −2). Adding the period 2π gives (11π6, −2), which matches the negative branch. Both vertices have magnitude 1, so the range check also agrees.

The trap

taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

A positive fraction moves outward

You need the output at a sine height of one half. Evaluate csc(π6) and locate its point.

Show the steps and the answer
(π/6, 2)π/2π123
y = csc x, solid, beside y = sin x, dashed, with the point (π/6, 2), for y from −0.5 to 3.
  1. Use sin(π6)=12.The 30° unit-circle vertical coordinate is one half.
  2. Compute 1÷12=1×21=2.Dividing by a fraction means multiplying by its reciprocal.
  3. Plot (π6,2), above the vertex's height of 1.The positive reciprocal height stays positive and moves farther from the x-axis.
Answer
  • csc(π6) = 2.
  • Point: (π6, 2).
Double-check Multiplication check: 12 × 2 = 1. The height 2 also fits the positive range y ≥ 1.

5.8 Secant: build a reciprocal graph from cosine

about 3 minOpen the full lesson

The rule

secx=1cosx, with x≠π2+nπ for every integer n.

Its vertical asymptotes are x=π2+nπ, its range is (−∞,−1]∪[1,∞), its period is 2π, and sec(−x)=secx.

How

  1. Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.
  2. Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.
  3. Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.
  4. Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.
  5. Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.

Worked example

Worked example

A full cosine-guided secant period

You need one complete positive branch and one complete negative branch. Sketch y = sec x on −π2 ≤ x ≤ 3π2 using cosine as the guide.

Show the steps and the answer
(0, 1)(π, −1)range−π/2π/2π3π/2−4−224
The same picture, shown 4 times now: y = sec x, solid, beside y = cos x, dashed, for x from −1.8708 to 5.0124.
input xoutput cos x−π/20−π/31/201π/31/2π/202π/3−1/2π−14π/3−1/23π/20
Read the cos x height under its input angle; all inputs in this picture are radians.
input xoutput sec x−π/2undefined−π/3201π/32π/2undefined2π/3−2π−14π/3−23π/2undefined
Read the sec x height under its input angle; all inputs in this picture are radians.
  1. Draw the cosine guide using the cosine fntable visual.The starting heights appear directly below the angle inputs.
  2. Set cosx=0 to locate forbidden inputs: −π2,π2,3π2. Plug them back in: cos(−π2)=cos(π2)=cos(3π2)=0.These values make the secant denominator zero, so each is excluded and receives an asymptote.
  3. Keep (0, 1) and (π,−1).Cosine has heights 1 and −1 there, and their reciprocals have the same values.
  4. Read the columns under −π3 and π3. Change each cosine height 12 to secant height 2.The positive branch lies between −π2 and π2, and these points guide its two sides.
  5. Read the columns under 2π3 and 4π3. Change each cosine height −12 to secant height −2.The negative branch lies between π2 and 3π2, and both support points remain negative. 2π3 = π − π3, so vertical-axis reflection reverses cosine. 4π3 = −2π3 + 2π; reflection across the horizontal axis and a full turn both keep that cosine.
  6. Draw an upward-opening curved branch centered at 0 and a downward-opening curved branch centered at π.Near either boundary the cosine height approaches zero with the branch's sign, so the reciprocal moves away from the x-axis without bound.
Answer
  • Asymptotes in the interval: x = −π2, π2, 3π2.
  • Positive branch: −π2 < x < π2, vertex (0, 1).
  • Negative branch: π2 < x < 3π2, vertex (π, −1).
  • The interval length and the repeating pattern are 2π.
Double-check Independent symmetry check: reflecting (π3, 2) across the y-axis gives (−π3, 2), the plotted positive point. Reflecting (π, −1) gives (−π, −1); adding the period 2π returns to (π, −1). The heights also satisfy the two allowed range bands.

The trap

secant uses cosine zeros, which lie at odd multiples of π2. Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.

Quick check

Try it before you open its steps. It is question 2 of 3 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 3

The negative branch at and beside its vertex

You need the negative branch's central height and one neighboring height. Evaluate sec π and sec(2π3).

Show the steps and the answer
(π, −1)(2π/3, −2)π/2π3π/2−3−2−1
y = sec x, solid, beside y = cos x, dashed, for x from π/2 to 3π/2.
  1. Use cosπ=−1 and cos(2π3)=−12.The unit-circle horizontal coordinates at 180° and 120° give these exact cosine values.
  2. Compute secπ=1−1=−1.The reciprocal of −1 is −1, locating the negative vertex.
  3. Compute sec(2π3)=1÷(−12)=−2.Dividing one by a negative half gives a negative output of magnitude 2.
  4. Plot (π,−1) and (2π3,−2) below the x-axis.Both inputs lie in the cosine-negative interval (π2, 3π2), so their secant heights are negative.
Answer
  • sec π = −1.
  • sec(2π3) = −2.
Double-check Multiplication checks: (−1) × (−1) = 1 and (−12) × (−2) = 1. The second point is farther below the axis than the vertex, as required.

5.9 Read, sketch and remember all four graphs

about 10 minOpen the full lesson

The rule

for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote.

Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.

How

  1. Write the quotient or reciprocal formula.
  2. Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.
  3. Plot the known key points within each allowed branch.
  4. Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.
  5. Repeat by the fundamental period and check the even or odd symmetry and the range.

Worked example

Worked example

Secant: the upward branch through (2π, 1) and its neighbor

Graph the branch of y = sec x that passes through the point (2π, 1), then sketch the neighboring downward branch through (3π, −1). Extend the graph using the period and the even symmetry of secant, and state the range. The three-column table gives exact values on the first branch: sec(7π4) = 2, sec(2π) = 1 and sec(9π4) = 2. The table lists each input as a multiple of π, so 1.75, 2 and 2.25 stand for 7π4, 2π and 9π4, and it shows 2 rounded to 1.414.

Show the steps and the answer
input x (multiple of π)output sec x1.751.414212.251.414↓ evaluate: input given, read the output below it
Three-column table of y = sec x on the branch through (2π, 1).
  1. Write secant as a reciprocal formula: y=secx=1cosx.Secant is the reciprocal of cosine, so each output is 1 divided by cos x. The formula has a value only where its denominator cos x is not 0.
  2. Set the denominator equal to 0: cosx=0 gives x=π2+kπ for any integer k. The two zeros on either side of 2π are x=3π2 and x=5π2. Substitute them back: cos(3π2)=0, and cos(5π2)=cos(π2+2π)=cos(π2)=0.A denominator-zero input is excluded. Just beside it cos x is close to 0, so 1cosx grows without bound, which makes each such vertical line a vertical asymptote. Consecutive zeros are π apart, so no other asymptote lies between 3π2 and 5π2, and these two lines bound the branch through (2π, 1).
  3. Find the allowed outputs of this branch. For 3π2<x<5π2, the angle x−2π is between −π2 and π2, so 0<cosx≤1. Therefore secx=1cosx≥1, and secx=1 only where cosx=1, which is at x=2π.The reciprocal of a positive number no greater than 1 is at least 1. So every point of this branch must lie on or above the line y = 1, and the branch opens upward.
  4. Verify and plot the table points. cos(2π)=1 gives sec(2π)=1. cos(7π4)=22 gives sec(7π4)=22=2≈1.414. cos(9π4)=cos(π4+2π)=22 gives sec(9π4)=2. Plot (2π,1),(7π4,2) and (9π4,2), at x≈6.28, 5.50 and 7.07.Each plotted point must agree with sec x = 1cosx and with the allowed outputs y ≥ 1. The two 2 points sit π4 either side of 2π at the same height, so the branch is symmetric about the line x = 2π.
  5. Draw the upward U. Start high beside x=3π2, fall through (7π4,2) to the lowest point (2π,1), rise through (9π4,2), and climb beside x=5π2 without ever touching either asymptote.From x = 3π2 to x = 2π, cos x increases from 0 to 1, so its reciprocal falls from unbounded values down to 1. From x = 2π to x = 5π2, cos x decreases from 1 toward 0, so sec x increases without bound. Near both asymptotes cos x approaches 0 through positive values, so the outputs head to +∞.
  6. Sketch the neighboring branch. The next zero of cos x is x=7π2, since cos(7π2)=cos(3π2+2π)=0. For 5π2<x<7π2,−1≤cosx<0. cos3π=cos(π+2π)=−1 gives sec3π=−1. cos(11π4)=cos(13π4)=−22 gives sec(11π4)=sec(13π4)=−2. Draw a downward U between x=5π2 and x=7π2 through (11π4,−2), the highest point (3π,−1), and (13π4,−2).The reciprocal of a negative number between −1 and 0 is at most −1, so this branch lies on or below y = −1. Near its asymptotes cos x approaches 0 through negative values, so the outputs fall without bound.
  7. Repeat by the fundamental period 2π. The window from x=3π2 to x=7π2 holds one upward and one downward branch, and copies of it shifted by 2π,4π, … in both directions give the whole graph. For example, shifting the first branch left by 2π gives the upward branch between x=−π2 and x=π2 through (−π4,2), (0, 1) and (π4,2). For integers k, the asymptotes are x=π2+kπ, the lowest points of the upward branches are (2kπ,1), and the highest points of the downward branches are ((2k+1)π,−1).cos(x + 2π) = cos x, so sec(x + 2π) = sec x and every point (x, y) repeats at (x + 2π, y). The period is 2π and not π because sec(x + π) = −sec x, so a shift of π carries an upward branch onto a downward one.
  8. Check the even symmetry. sec(−x)=1cos(−x)=1cosx=secx, so the graph is symmetric about the y-axis. The mirror image of (7π4,2) is (−7π4,2), and cos(−7π4)=22 gives sec(−7π4)=2. The period gives the same value: −7π4=9π4−4π, and sec(9π4)=2.Even symmetry pairs each point (x, y) with (−x, y). The paired point agrees with both the formula and the period, so the extended graph is consistent. The copy through (0, 1) is its own mirror image.
  9. State the range. Wherever sec x is defined, either 0<cosx≤1, giving secx≥1 (the upward branches), or −1≤cosx<0, giving secx≤−1 (the downward branches). The range is (−∞,−1]∪[1,∞).cos x always lies between −1 and 1, so no output of sec x lies strictly between −1 and 1. The values 1 and −1 are reached at x = 2π and x = 3π, and the branches climb or fall without bound near the asymptotes.
Answer
The branch through (2π, 1) is an upward U between the vertical asymptotes x = 3π2 and x = 5π2. Its lowest point is (2π, 1), and it passes through (7π4, 2) and (9π4, 2). Beside it is a downward U between x = 5π2 and x = 7π2 with highest point (3π, −1). The graph repeats every 2π, has vertical asymptotes x = π2 + kπ for every integer k, and is symmetric about the y-axis because sec(−x) = sec x. The range is (−∞, −1] ∪ [1, ∞).
Double-check Test an input that is not in the table. x = 11π6 lies between 7π4 and 2π, and cos(11π6) = 32, so sec(11π6) = 23 = 233 ≈ 1.155. This lies between 1 and 2 ≈ 1.414, as the falling left half of the U requires. Just right of the asymptote, x = 3π2 + 0.01 gives cos x = sin 0.01 ≈ 0.0100 and sec x ≈ 100, a very large positive output. The pair (7π4, 2) and (−7π4, 2) agrees with both the even symmetry and the period 2π. Every plotted output (1, 2, −1 and −2) satisfies y ≥ 1 or y ≤ −1.

Work to write

  1. sec x = 1cosx
  2. cos x = 0 gives x = π2 + kπ; check: cos(3π2) = 0 and cos(5π2) = 0
  3. Vertical asymptotes of the branch: x = 3π2 and x = 5π2
  4. sec(2π) = 1, sec(7π4) = 22 = 2, sec(9π4) = 2
  5. Upward U with lowest point (2π, 1); sec x ≥ 1 on this branch
  6. Downward U between x = 5π2 and x = 7π2 with highest point (3π, −1)
  7. Period 2π: sec(x + 2π) = sec x; asymptotes x = π2 + kπ
  8. Even: sec(−x) = sec x, so sec(−7π4) = 2
  9. Range: (−∞, −1] ∪ [1, ∞)

The trap

Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.

6 Sinusoidal functions

about 12 min9 lessonsOpen the unit's crash course

6.1 A sinusoidal function is a repeating wave

Open the full lesson

The rule

a sine wave is written y=Asin(ωx−φ)+B, and a cosine wave is written y=Acos(ωx−φ)+B.

For a nonconstant wave, A≠0; use ω>0 after rewriting signs. The inside input is in radians. Read ω as omega and φ as phi. A coefficient is a multiplier; ω is the coefficient of x. A parameter is a fixed setting such as A, ω,φ or B. T labels the period and h labels the signed horizontal shift. The subscript max means highest output and min means lowest output.

How

  1. Name the wave as sine or cosine.
  2. Read the number multiplying the whole wave, A.
  3. Read the coefficient of x inside, ω, and match the inside to ωx − φ.
  4. Read the number added after the wave, B.
  5. Use the next lessons to translate these parameters into distances.

Worked example

Worked example

Follow one unshifted sine cycle

The input is an angle in radians. Find the five turning and crossing heights of y = sin x in one full cycle, then see where they repeat.

Show the steps and the answer
π/23π/2−2−112
The same picture, shown 4 times now: y = sin x, for x from −1 to 7.2832.
input xoutput sin x00π/21π03π/2−12π0↓ evaluate: input given, read the output below it
The same picture again: x: 0, π2, π, 3π2, 2π; sin x: 0, 1, 0, −1, 0.
  1. Read the sine table at x=0: sin0=0.Sine is the vertical coordinate on the unit circle, whose starting point has height 0.
  2. At x=π2,sinx=1; at x=π,sinx=0.A quarter turn reaches the top of the circle, and a half turn returns to height 0.
  3. At x=3π2,sinx=−1; at x=2π,sinx=0.Three quarters of a turn reaches the bottom, and a full turn reaches the start.
  4. At x=2π+π2=5π2, the output is 1 again.The extra 2π is one full turn, which returns to the same circle point before the quarter turn.
Answer
  • One cycle runs from x = 0 to x = 2π.
  • The heights at the five key points are shown in the table.
  • The pattern then repeats.
Double-check The start and end both have height 0 and are followed by increasing heights. You have returned to the same stage of the motion.

The trap

Do not call every periodic function sinusoidal. Repeating stair steps repeat too, but they are not sine or cosine waves.

6.2 Amplitude measures height, not direction

Open the full lesson

The rule

amplitude =|A|=ymax−ymin2.

It is the distance from the midline to an extreme, not the full height. Negative A reflects the wave vertically.

How

  1. Read A, the entire outside multiplier, including its sign.
  2. Use |A| for the amplitude.
  3. If heights are given instead, subtract minimum from maximum and divide by 2.
  4. Keep A's sign when drawing which part of the cycle rises or falls.

Worked example

Worked example

Amplitude when the outside multiplier is negative

Find A and the amplitude of y = −9 sin(π2x) + 2. The midline is y = 2, and one cycle runs from x = 0 to x = 4, with lowest point (1, −7) and highest point (3, 11). Confirm the amplitude from those two heights, then say whether the graph falls or rises first as it leaves (0, 2). The figure shows the midline with the five key points (0, 2), (1, −7), (2, 2), (3, 11) and (4, 2).

(0, 2)(1, −7)(2, 2)(3, 11)(4, 2)−2246−8−44812
The horizontal line is the midline y = 2.
Show the steps and the answer
  1. Read the outside multiplier of y=−9sin(π2x)+2: A=−9.A is the entire number multiplying the sine, sign included. The π2 inside the sine and the + 2 added at the end are not part of it.
  2. Take the absolute value: amplitude =|A|=|−9|=9.Amplitude is a distance from the midline to an extreme, and a distance cannot be negative, so the sign is dropped when measuring the size of the wave.
  3. Confirm with the heights. The highest point (3, 11) gives ymax=11 and the lowest point (1,−7) gives ymin=−7, so amplitude =ymax−ymin2=11−(−7)2=182=9.Subtracting the minimum from the maximum gives the full height, 18, which is two amplitudes: one below the midline and one above. Dividing by 2 leaves one amplitude, and it matches |A|.
  4. Measure from the midline y=2: up to the top is 11−2=9, and down to the bottom is 2−(−7)=9.The amplitude runs from the midline to an extreme, not from bottom to top, so each of these distances must be 9. The full height 18 is not the amplitude.
  5. Bring the sign back for the shape. At x=1,y=−9sin(π2)+2=−9×1+2=−7, so the graph leaves (0, 2) going down to (1,−7), comes back to (2, 2), climbs to (3, 11) and returns to (4, 2).With A = 9 the graph would rise first, to (1, 11). The negative A reflects the wave vertically across the midline, so the fall comes first and the rise second. Only the direction changes; the size stays 9.
Answer
A = −9, and the amplitude is |−9| = 9 (not −9, and not 18). The heights agree: 11−(−7)2 = 182 = 9, so the full height 18 is twice the amplitude. Because A is negative, the graph falls first, from (0, 2) to its lowest point (1, −7), and rises to its highest point (3, 11) afterwards.
Double-check Since sin(π2x) stays between −1 and 1, −9 sin(π2x) stays between −9 and 9, so y stays between 2 − 9 = −7 and 2 + 9 = 11. Substituting confirms both ends are reached: at x = 1, sin(π2) = 1 gives y = −9 × 1 + 2 = −7, and at x = 3, sin(3π2) = −1 gives y = −9 × (−1) + 2 = 11. The formula gives the same lowest and highest heights as the problem, and 11 − (−7) = 18 = 2 × 9, so the amplitude is 9.

Work to write

  1. A=−9
  2. amplitude = |A| = |−9| = 9
  3. ymax−ymin2 = 11−(−7)2 = 182 = 9
  4. 11 − 2 = 9 and 2 − (−7) = 9
  5. A is negative, so the graph falls first from (0, 2) to (1, −7), then rises to (3, 11)

The trap

Do not report maximum-minus-minimum as the amplitude. It contains two amplitude distances.

6.3 Period measures the width of a repeat

about 1 minOpen the full lesson

The rule

for ω>0,T=2πω and ω=2πT.

Use adjacent matching stages of the wave to read T from a graph. T is a positive repeat distance, and h will name a signed horizontal shift.

How

  1. Read ω, the coefficient of x inside.
  2. Divide 2π by that positive coefficient.
  3. If T is given instead, divide 2π by T to find ω.
  4. Plug back into ωT = 2π.

Worked example

Worked example

Four times the input runs four times as fast

Find the period of y = sin(4x). This asks how far x moves before the entire shape repeats.

Show the steps and the answer
one periodπ/2π−2−112
The same picture, shown 6 times now: y = sin 4x.
  1. The inside input needs to advance by 2π for one full sine cycle.That is one full turn.
  2. Set 4T=2π to find the horizontal distance that produces this inside change.Changing x by T changes 4x by 4T.
  3. Divide by 4: T=2π4=π2.Division undoes multiplication and finds the needed distance.
  4. Plug back: 4×π2=2π.The distance really does send the inside through exactly one turn.
Answer
Period T = π2
Double-check At x + π2, the inside becomes 4x + 2π; sine then gives the same output as at x.

The trap

ω is not the period. It is the multiplier that determines the period.

6.4 Phase shift: why minus inside moves right

about 1 minOpen the full lesson

The rule

h=φω, with ω>0.

Factor ωx−φ=ω(x−h). h > 0 moves right; h < 0 moves left; h=0 gives no horizontal shift. We name the signed horizontal slide h.

How

  1. Match the entire inside input to ωx − φ, including the sign of φ.
  2. Set the inside input equal to 0 to locate the chosen cycle start.
  3. Undo the subtraction, then divide by the positive coefficient of x.
  4. Plug the answer back into the inside and confirm 0.
  5. State the distance and direction separately.

Worked example

Worked example

Subtract 1 inside

Compare sin(x − 1) with sin x. Find where the original inside input 0 now happens. This asks where the original starting point moves.

Show the steps and the answer
cycle startsπ/23π/25π/2−2−112
The same picture, shown 7 times now: y = sin(x − 1), solid, beside y = sin x, dashed.
  1. The basic sine has inside input 0 at x=0.Its starting height is sin 0 = 0.
  2. Set x−1=0 to find where the shifted formula receives that same inside input.Matching the inside input matches the stage of the sine motion.
  3. Add 1 to both sides: x=1.Adding undoes subtraction and locates the shifted starting point.
  4. Plug back: 1−1=0.The new input 1 does feed the original sine input 0.
  5. For any old input u, choose x=u+1; then x−1=u.This shows every point moves right 1, not only the starting point.
Answer
Phase shift = 1 unit right
Double-check The old peak at x = π2 now occurs at x = 1 + π2, because (1 + π2) − 1 = π2.

The trap

Do not read the phase shift as φ alone. First translate from inside units to x-units by dividing by ω.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

Divide the inside subtraction by its speed

Find the phase shift of sin(2x − π). This asks how much the graph slides relative to sin(2x).

cycle startsπ/23π/2−2−112
y=sin(2x−π).
Show the steps and the answer
  1. Match 2x−π to ωx−φ: ω=2 and φ=π.The subtracted number is not yet the x-distance.
  2. Set 2x−π=0 to locate the selected cycle start.The sine receives inside input 0 at that horizontal position.
  3. Add π: 2x=π. Divide by 2: x=π2.You undo the subtraction and then the input multiplier.
  4. Plug back: 2×π2−π=0.The proposed x gives the intended inside input.
  5. Factor: 2x−π=2(x−π2).The form x − h displays the horizontal distance h.
Answer
Phase shift = π2 right
Double-check The unshifted peak needs inside input π2. Solve 2x = π2 to find its horizontal position: x = π4. Plug back: 2 × π4 = π2. Moving it right by h = π2 gives π4 + 2π4 = 3π4. Plug into the shifted inside: 2 × 3π4 − π = 3π2 − π = π2, so sine is 1 at the shifted peak.

6.5 One cycle: solve the inside-input inequality

about 1 minOpen the full lesson

The rule

0≤ωx−φ≤2π gives h≤x≤h+T, where h=φω and T=2πω, provided ω>0.

How

  1. Write 0 ≤ the entire inside input ≤ 2π.
  2. Undo addition or subtraction in all three parts.
  3. Undo multiplication by dividing all three parts by positive ω.
  4. Plug both endpoints back into the inside; get 0 and 2π.
  5. Subtract start from end to get the period.

Worked example

Worked example

The basic cycle

Find one cycle interval of y = sin x using the inside input from 0 to 2π. This asks for the horizontal beginning and end.

Show the steps and the answer
π/23π/2−2−112
y = sin x.
  1. The inside is x, so 0≤x≤2π.The base sine completes one turn as its inside moves through that interval.
  2. The selected start is x=0 and end is x=2π.These inputs send the inside to its required endpoints.
  3. Plug back: at x=0 the inside is 0; at x=2π the inside is 2π.Both endpoints match the desired stages.
  4. Length =2π−0=2π.A horizontal distance is right endpoint minus left endpoint.
Answer
  • One cycle: [0, 2π]
  • Phase shift = 0
  • Period = 2π
Double-check The graph begins at height 0 going up and returns to that same stage at 2π.

The trap

Matching endpoint heights alone does not prove a full cycle. A sine wave also has equal heights half a cycle apart, but it then moves in the opposite direction.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Speed up the inside

Find one cycle interval of sin(2x). Find the two x-values that make the inside run from 0 to 2π.

Show the steps and the answer
one periodπ/2π3π/22π−2−112
y = sin 2x.
  1. Write 0≤2x≤2π.This restricts the inside input to one full turn.
  2. Divide all three parts by positive 2: 0≤x≤π.Positive division preserves their order.
  3. Plug back: 2×0=0 and 2×π=2π.The endpoints produce a full inside cycle.
  4. Length =π−0=π.Subtracting endpoints measures the width.
Answer
  • One cycle: [0, π]
  • Period = π
Double-check T = 2π2 = π independently.

6.6 Midline, maximum, minimum and range

about 1 minOpen the full lesson

The rule

midline y=B, with B=ymax+ymin2.

Minimum =B−|A|; maximum =B+|A|. Range: [B−|A|,B+|A|].

How

  1. Find the center B from the outside addition or the average of the extremes.
  2. Find the positive amplitude |A|.
  3. Subtract the amplitude from B for the minimum.
  4. Add the amplitude to B for the maximum.
  5. Write the midline as an equation and the range as an included interval.

Worked example

Worked example

A reflected wave above a new center

Find the midline and range of y = −3 sin x + 1. This asks for the center line and every possible output height.

Show the steps and the answer
amplitude 3rangeπ/23π/2−224
The same picture, shown 4 times now: y = −3 sin x + 1, with its midline, range and amplitude marked.
  1. B=1, so the midline is y=1.The outside addition raises every height by 1.
  2. |A|=|−3|=3.The negative multiplier reflects the wave, but the distance is positive.
  3. Minimum =B−|A|=1−3=−2.Move 3 below the center.
  4. Maximum =B+|A|=1+3=4.Move 3 above the center.
  5. The range is [−2,4], including both endpoints.The sine wave passes continuously through every height between its attained extremes.
Answer
  • Midline: y = 1
  • Range: [−2, 4]
Double-check At x = π2, y = −3(1) + 1 = −2. At x = 3π2, y = −3(−1) + 1 = 4, so both claimed endpoints really occur.

The trap

The Domain is the input set; the Range is the output set. A transformed sine or cosine still accepts every real x, while its output heights are bounded.

6.7 Read all four features, including unusual signs

about 6 minOpen the full lesson

The rule

rewrite negative inside speed first: cos(−u)=cosu; sin(−u)=−sinu.

Then amplitude |A|, period 2πω, phase shift φω, and midline y=B.

How

  1. If the x-coefficient inside is negative, factor out −1 from the whole inside.
  2. Use the cosine even rule or sine odd rule.
  3. Match A, ω, φ and B, keeping signed quantities.
  4. Compute each feature on its own line.
  5. Plug the shift into the original and rewritten inside and check the range.

Worked example

Worked example

Two minus signs that cancel: y = −10 sin(−π9x + π3) − 5

Find the amplitude, period, phase shift and midline of y = −10 sin(−π9x + π3) − 5. Say which way the graph is shifted and whether it is reflected. Then check the shift in both the original and the rewritten inside, and check the range. The figure shows the midline y = −5 of the finished graph with the five key points of one cycle: (3, −5), (7.5, 5), (12, −5), (16.5, −15) and (21, −5). Your answers should agree with it.

(3, −5)(7.5, 5)(12, −5)(16.5, −15)(21, −5)391521−18−12−66
The midline y = −5 of the finished graph y = 10 sin(π9x − π3) − 5, with the five key points of one cycle.
Show the steps and the answer
  1. Look inside the sine. The x-coefficient is −π9, which is negative. Factor −1 out of the whole inside: −π9x+π3=−(π9x−π3).The rule removes a negative speed before any feature is read. The −1 must come out of both terms, so +π3 becomes −π3 inside the brackets. Multiplying back out gives −π9x + π3 again, so only the form has changed. Writing −(π9x + π3) instead would wrongly send the shift to the left.
  2. Let u=π9x−π3, so y=−10sin(−u)−5. Sine is odd, so sin(−u)=−sinu and −10sin(−u)=−10(−sinu)=10sinu. The rewritten function is y=10sin(π9x−π3)−5.The odd rule moves the inner minus sign to the front, where it multiplies the −10. Two negatives make a positive, so the coefficient in front becomes +10. The − 5 outside the sine is not affected.
  3. Match y=10sin(π9x−π3)−5 with y=Asin(ωx−φ)+B. This gives A=10,ω=π9,φ=π3 and B=−5.All four features are read from the rewritten form, where the speed is positive. φ is the amount subtracted from ωx, so φ = +π3. The constant outside the sine is − 5, so B = −5 with its sign kept.
  4. Amplitude =|A|=|10|=10. Because A=10 is positive, the graph is not reflected.Amplitude is the height from the midline to a peak, so it is the absolute value of A. The −10 in the original only looked like a reflection, because the minus sign from sin(−u) cancelled it.
  5. Period =2πω=2π÷π9=2π·9π=18.One sine cycle is complete when the inside has grown by 2π. The inside grows by π9 for each unit of x, so a cycle takes 18 units of x.
  6. Phase shift =φω=π3÷π9=π3·9π=3. The shift is positive, so the graph is shifted 3 units to the right.π9x − π3 = π9(x − 3), so the cycle that normally starts at x = 0 now starts at x = 3. A positive phase shift means right and a negative one means left.
  7. Midline: y=B=−5.B lowers the whole graph by 5, so the curve rises and falls by equal amounts about the horizontal line y = −5.
  8. Put x=3 into both insides. Original: −π9(3)+π3=−π3+π3=0. Rewritten: π9(3)−π3=π3−π3=0. Then y=−10sin0−5=−5.The phase shift is where a cycle starts, so the inside must equal 0 there. Getting 0 in the original form as well as the rewritten one confirms both the factoring and the direction of the shift. y = −5 shows that the start point lies on the midline.
  9. Range: B−|A|≤y≤B+|A|, so −5−10≤y≤−5+10, which gives −15≤y≤5. In the original, x=7.5 gives the inside −π9(7.5)+π3=−5π6+2π6=−π2, so y=−10(−1)−5=5. Also x=16.5 gives the inside −11π6+2π6=−3π2, so y=−10(1)−5=−15.The value of sin stays between −1 and 1, so y stays within |A| = 10 of the midline. The maximum 5 comes a quarter period after the start (3 + 4.5 = 7.5), and the minimum −15 comes three quarters of the way through (3 + 13.5 = 16.5). The graph rises first, as an unreflected sine should.
Answer
  • Rewritten, the function is y = 10 sin(π9x − π3) − 5. Amplitude 10
  • period 18
  • phase shift 3, so the graph is shifted 3 units to the right
  • midline y = −5. The graph is not reflected, because the minus in −10 cancels the minus from sin(−u) = −sin u. Its range is −15 ≤ y ≤ 5.
Double-check At the shift x = 3, the original inside −π9(3) + π3 and the rewritten inside π9(3) − π3 are both 0, so y = −5 lies on the midline. At x = 7.5 the original gives y = −10 sin(−π2) − 5 = 5 = B + |A|. At x = 16.5 it gives y = −10 sin(−3π2) − 5 = −15 = B − |A|. So the range is −15 ≤ y ≤ 5. At x = 12 the inside is −12π9 + 3π9 = −π, and at x = 21 it is −21π9 + 3π9 = −2π, so y = −5 at both. The cycle from 3 to 21 therefore has length 18, which matches the period. All five key points agree with the figure.

Work to write

  1. −π9x+π3=−(π9x−π3)
  2. sin(−u) = −sin u, so −10 sin(−u) = 10 sin u
  3. y=10sin(π9x−π3)−5
  4. A=10,ω=π9,φ=π3,B=−5
  5. Amplitude = |10| = 10; not reflected
  6. Period = 2π ÷ π9 = 18
  7. Phase shift = π3 ÷ π9 = 3, so 3 units to the right
  8. Midline: y = −5
  9. x = 3: −π3 + π3 = 0 and π3 − π3 = 0
  10. Range: −15 ≤ y ≤ 5

The trap

The chosen cycle start is an upward crossing for positive-A sine and a peak for positive-A cosine. Negative A reverses those starting features.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

Cosine with a negative fractional speed: fractions in both inside positions

Find the amplitude, period, phase shift and midline of y = 5 cos(−π8x + 3π4) + 2. Say which way the graph is shifted. Then check the shift in both the original and the rewritten inside, and check the range. The figure is drawn from the answer and shows the midline and the five key points of one cycle.

(6, 7)(10, 2)(14, −3)(18, 2)(22, 7)391521−448
For y = 5 cos(−π8x + 3π4) + 2, the horizontal line is the midline y = 2.
Show the steps and the answer
  1. The x-coefficient −π8 is negative, so factor −1 out of the whole inside: −π8x+3π4=−(π8x−3π4).The period and shift formulas need a positive speed ω. The −1 comes out of both terms, so the constant changes sign too: +3π4 becomes −3π4 inside the bracket. Expanding −(π8x − 3π4) gives back −π8x + 3π4, so the function has not changed.
  2. Use the cosine even rule cos(−u)=cosu with u=π8x−3π4: y=5cos(π8x−3π4)+2.Cosine is even. On the unit circle the angles u and −u are mirror images across the x-axis, so they share the same x-coordinate, and that x-coordinate is the cosine. The minus in front of the bracket drops and the 5 stays 5. Only a sine would change A, because sin(−u) = −sin u.
  3. Match y=5cos(π8x−3π4)+2 with y=Acos(ωx−φ)+B: A=5,ω=π8,φ=3π4,B=2.The pattern has a minus in front of φ, so the −3π4 in the bracket means φ = +3π4. Keeping that sign decides the direction of the shift.
  4. Amplitude: |A|=|5|=5.The amplitude is the vertical distance from the midline to a maximum, and a distance is never negative.
  5. Period: 2πω=2π÷π8=2π×8π=16.Dividing by the fraction π8 means multiplying by its reciprocal 8π. The π cancels, leaving 2 × 8 = 16. One full cycle covers 16 units of x.
  6. Phase shift: φω=3π4÷π8=3π4×8π=244=6. It is positive, so the graph is shifted 6 units to the right.Both positions hold fractions, so again multiply by the reciprocal of ω. The π cancels and 34 × 8 = 6. In y = A cos(ωx − φ) + B a positive φω means a shift to the right. The factored form π8x − 3π4 = π8(x − 6) shows the same thing.
  7. Midline: y=B=2.The + 2 is added outside the cosine, so every point of the graph is lifted by 2 and the graph swings evenly about the line y = 2.
  8. Plug the shift x=6 into both insides. Original: −π8(6)+3π4=−3π4+3π4=0. Rewritten: π8(6)−3π4=3π4−3π4=0. At that point y=5cos0+2=7.A cosine cycle starts where its inside is 0. Both insides are 0 at the same x, which shows the rewrite kept the function the same. The value y = 7 = B + |A| shows the cycle starts at a maximum, as a cosine cycle should.
  9. Check the range: cosine runs from −1 to 1, so y runs from 5(−1)+2=−3 to 5(1)+2=7, giving −3≤y≤7.The graph reaches |A| above and |A| below the midline: 2 + 5 = 7 and 2 − 5 = −3. The top value 7 agrees with the maximum found at x = 6.
Answer
  • Amplitude 5
  • period 16
  • phase shift 6 units to the right
  • midline y = 2. The rewritten form is y = 5 cos(π8x − 3π4) + 2, and the range is −3 ≤ y ≤ 7.
Double-check One period after the start is x = 6 + 16 = 22. There the original inside is −π8(22) + 3π4 = −22π8 + 6π8 = −2π, and cos(−2π) = 1, so y = 7 again: this is the next maximum. From the range, the midline is 7+(−3)2 = 2 and the amplitude is 7−(−3)2 = 5, which match B and |A|. The key points of one cycle are a quarter period (4 units) apart: (6, 7), (10, 2), (14, −3), (18, 2) and (22, 7). Sign trap: dropping the minus from the x-term only gives cos(π8x + 3π4), which suggests a shift of 6 to the left. But at x = −6 the original inside is −π8(−6) + 3π4 = 3π2, not 0, so that rewrite fails the check.

Work to write

  1. −π8x+3π4=−(π8x−3π4)
  2. cos(−u) = cos u, so y = 5 cos(π8x − 3π4) + 2
  3. A=5,ω=π8,φ=3π4,B=2
  4. Amplitude = |5| = 5
  5. Period = 2π ÷ π8 = 2π × 8π = 16
  6. Phase shift = 3π4 ÷ π8 = 3π4 × 8π = 6, so 6 units to the right
  7. Midline: y = 2
  8. x = 6: original inside −π8(6) + 3π4 = 0; rewritten inside π8(6) − 3π4 = 0
  9. Range: 5(−1) + 2 = −3 to 5(1) + 2 = 7, so −3 ≤ y ≤ 7

6.8 Build an equation from a graph

Open the full lesson

The rule

A=ymax−ymin2>0,B=ymax+ymin2,ω=2πT,φ=ωh.

Choose h at an upward middle crossing for sine or a peak for cosine.

How

  1. Read the maximum and minimum, then find positive A and B.
  2. Read T between adjacent matching stages.
  3. Compute ω = 2π ÷ T.
  4. Choose sine at an upward middle crossing or cosine at a peak; read h.
  5. Compute φ = ωh and substitute h back into the inside.
  6. Check points one quarter period apart.

Worked example

Worked example

A centered cosine graph

A smooth cosine-shaped graph has maximum 1, minimum −1 and adjacent peaks at x = 0 and x = 2π. Write one equation. You are converting the pictured heights and repeat width into a rule.

amplitude 1one periodπ/23π/25π/2−2−112
y = cos x.
Show the steps and the answer
  1. Amplitude =1−(−1)2=1; B=1+(−1)2=0.Half-difference gives size, and average gives center.
  2. T=2π−0=2π, so ω=2π÷2π=1.Adjacent peaks mark one full cycle.
  3. Choose positive cosine with h=0, the first peak.Positive cosine reaches its maximum when its inside is 0.
  4. φ = ωh = 1 × 0 = 0; plug back: 1×0−0=0.The peak's x-coordinate gives the inside start after converting h to φ.
  5. Write y=cosx.All four parameters are now fixed.
Answer
y = cos x
Double-check At x = π, halfway between the peaks, cos π = −1, the pictured minimum.

The trap

A graph alone does not force a unique phase shift. State which sine or cosine start you chose and check that the equation reproduces the pictured stages.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Raised cosine graph

A graph has maximum 9, minimum 3, and adjacent peaks at x = 0 and x = 8. Write a positive cosine equation. This asks for the wave's size, center and repeat width, with its peak placed at input 0.

amplitude 3one periodπ2π3π4π5π246810
y = 3 cos (π/4)x + 6.
Show the steps and the answer
  1. A=9−32=3 and B=9+32=6.Choose positive A so a peak is the cosine start.
  2. T=8−0=8, so ω=2π8=π4.The two peaks enclose one full inside turn.
  3. h=0, so φ=ωh=0. At x=0, the inside is 0.The first peak is at the standard cosine start.
  4. Write y=3cos(π4x)+6.Combine size, speed, position and center.
Answer
y=3cos(π4x)+6
Double-check At x = 4 the inside is π, giving 3(−1) + 6 = 3. At x = 8 the inside is 2π, giving 9 again.

6.9 Build and check a daylight model

Open the full lesson

The rule

for a fitted positive-A sine wave, A=Dmax−Dmin2,B=Dmax+Dmin2,ω=2πT,φ=ωh.

Choose h near a rising middle crossing and compare predictions with observations.

How

  1. Define the time input and the output units.
  2. Draw the table and plot the observed points.
  3. Read the observed maximum, minimum and repeating interval.
  4. Choose a suitable sine crossing or cosine peak.
  5. Assemble the model and check several months.
  6. Repeat the observation pattern by T for the requested longer plot.

Worked example

Worked example

Model rung 1: one exact repeating table

A synthetic repeating table is shown. The first zero crossing is upward, and the next matching crossing is at t = 4. Write a sine model. This asks for a rule that follows the recorded rise and fall.

input toutput recorded output0011203−140
t: 0, 1, 2, 3, 4; recorded output: 0, 1, 0, −1, 0.
Show the steps and the answer
input toutput recorded output0011203−140
The same picture again: t: 0, 1, 2, 3, 4; recorded output: 0, 1, 0, −1, 0.
starthighmiddlelowrepeatone periodπ/23π/25π/2−11
y = sin (π/2)x.
  1. Read the high output 1 and low output −1. A=1−(−1)2=1; B=1+(−1)2=0.Half the span gives height distance; half the sum gives center.
  2. T=4−0=4, so ω=2π4=π2.Adjacent upward crossings give the full repeat width.
  3. Choose positive sine at h = 0. φ = ωh = 0. Plug back: π2×0−0=0.This puts the inside start at the recorded rising center crossing.
  4. Write y=sin(π2t). Read the columns under 1 and 3: the inside angles are π2 and 3π2, giving 1 and −1.The quarter-turn values reproduce the two recorded extremes.
Answer
  • y=sin(π2t)
  • Amplitude = 1
  • Period = 4
  • Midline: y = 0
Double-check The columns under 0 and 4 both give 0, and the rule rises immediately after both. All five listed outputs match the table.

The trap

Do not confuse an observed height with a model prediction. The instructor's formula approximates the table and does not exactly place every observed extreme in its recorded month.

Quick check

Try it before you open its steps. It is question 2 of 3 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 3

Model rung 2: a raised repeating height

The synthetic table shows a peak at t = 0, a low at t = 5, and the next peak at t = 10. Write a positive cosine model. This asks for its center, size and repeating timing.

input toutput recorded height0175/2125715/2121017
t: 0, 52, 5, 152, 10; recorded height: 17, 12, 7, 12, 17.
Show the steps and the answer
input toutput recorded height0175/2125715/2121017
The peak columns at 0 and 10 enclose one whole repeat.
amplitude 5one periodπ3π5π681012141618
A center height 12 and amplitude 5 place the extremes at 7 and 17.
  1. A=17−72=102=5; B=17+72=242=12.The largest and smallest outputs in the picture set the amplitude and center.
  2. T=10−0=10; ω=2π10=π5.Peak to next peak measures a complete repeat.
  3. Choose cosine with h=0; φ=ωh=0. At t=0 the inside is 0.Positive cosine starts at the chosen peak.
  4. Write y=5cos(π5t)+12. At t=5, the inside is π, so y=5(−1)+12=7.The independent half-period check reproduces the recorded minimum.
Answer
  • y=5cos(π5t)+12
  • Amplitude = 5
  • Period = 10
  • Midline: y = 12
Double-check At t = 10 the inside is 2π and the output is 17 again. At t = 52 it is π2 and the output is 12, agreeing with the middle-height column.

7 Inverse trigonometric functions

about 32 min8 lessonsOpen the unit's crash course

7.1 Why a trig function needs its domain cut before it can have an inverse

about 6 minOpen the full lesson

The rule

Horizontal line test: a function has an inverse function exactly when no horizontal line crosses its graph more than once.

A function that passes is called a one-to-one function. Every trig function repeats, so each one fails the test and must be cut first. Sine is cut to the restricted domain [−π2, π2], where sin θ takes every value in [−1, 1] exactly once.

How

  1. Say in plain words what is asked: can the function be run backward, that is, does each output come from only one input?
  2. Picture the graph with inputs across and outputs up. For sine it is the wave that rises to 1 at π2, falls to −1 at 3π2 and repeats every 2π.
  3. Slide a horizontal line from the bottom of the graph to the top and watch for any height where it touches two or more points.
  4. If it ever does, write the proof as a pair: two inputs with one shared output, such as sin(π6) = sin(5π6) = 12. The function is not a one-to-one function, so on that domain it has no inverse function.
  5. To repair a smooth wave like sine, keep a stretch of inputs with no turn inside it that still reaches every output. For sine that stretch is the restricted domain [−π2, π2].
  6. Check the stretch: evaluate sine at its ends and its middle, sin(−π2) = −1, sin 0 = 0 and sin(π2) = 1, then slide the horizontal line again; each height from −1 to 1 should touch once.

Worked example

Worked example

Sine fails the test, and the kept piece passes

(a) Find two angles with the same sine, and use them to show that sine fails the horizontal line test.
(b) Show that on the angles −π2 ≤ θ ≤ π2, sine takes every value in [−1, 1] exactly once.

Show the steps and the answer
x = cos θy = sin θπ/6
The point at π6 is (32, 12): its height is 12.
x = cos θy = sin θ5π/6
Its mirror image across the vertical axis, at 5π6, is (−32, 12): the same height, 12.
(−π/2, −1)(π/2, 1)domainrange−π/2π/2−11
The kept piece climbs from height −1 to height 1 and never turns back.
  1. Say what part (a) asks: find one height that two different angles share. Say what part (b) asks: on the kept angles, show that no height repeats and that no height from −1 to 1 is missing.A horizontal line at height h touches the sine graph at every angle whose sine is h, so a shared height is a horizontal line that touches twice.
  2. Start with the special angle π6. Its point on the unit circle is (32,12), so sin(π6)=12.Sine is the height, the y-coordinate, of the point on the unit circle, and π6 is the 30° special angle.
  3. Mirror that point across the vertical axis: (32,12) becomes (−32,12). This new point stops π6 short of the half turn π, so its angle is π−π6=6π6−π6=5π6.A mirror across the vertical axis keeps the height and swaps right for left. To subtract, write π as 6π6 so both fractions have the bottom 6.
  4. So sin(5π6)=12 as well: the horizontal line y=12 touches the sine graph at θ=π6 and at θ=5π6.Both points have the same height, 12.
  5. Answer (a): two different angles share the output 12, so sine fails the horizontal line test and is not a one-to-one function.The test fails as soon as one horizontal line touches twice, so one pair is a complete proof.
  6. It is worse than two: π6+2π=π6+12π6=13π6 lands on the same point, so sin(13π6)=12 too, and every further full turn adds another angle.2π is one full turn, and a full turn ends where it started.
  7. For (b), place the kept angles on the circle: θ=−π2 is the bottom, (0,−1); θ=0 is the right end, (1, 0); θ=π2 is the top, (0, 1).−π2 is a quarter turn clockwise from (1, 0), and π2 is a quarter turn counterclockwise.
  8. As θ grows from −π2 to π2, the point travels up the right half of the circle, from the bottom to the top. Its height climbs the whole way.On the right half each counterclockwise step lifts the point; the height starts to fall only after the top, and the top is where the piece ends.
  9. No repeats: a height that only climbs never returns to a value it already had, so every horizontal line touches the kept piece at most once.That is what passing the horizontal line test means.
  10. Nothing missing: the height moves smoothly from −1 up to 1, so it passes through every value in between, and the square brackets keep both ends, where the heights are −1 and 1.Like an elevator riding from the lowest floor to the highest: it passes every level on the way, and both end floors are part of the ride.
  11. Look back at the pair from (a): π6 is in the kept piece, but 5π6 is not, because π2=3π6 and 5π6 is bigger than 3π6. The cut threw the duplicate away.To compare fractions of π, give them the same bottom and compare the tops: 5 > 3.
Answer
  • (a) sin(π6) = sin(5π6) = 12, so the line y = 12 crosses the sine graph twice: sine fails the horizontal line test.
  • (b) On [−π2, π2] the height climbs from −1 to 1 without turning back, so each value in [−1, 1] is taken exactly once.
Double-check Second way, from the graph. (a) The sine wave rises to its top at θ = π2 and comes down the same way it went up, so two angles the same distance before and after π2 have the same height. π6 sits π3 before the top, since π2 − π6 = 3π6 − π6 = 2π6 = π3, and 5π6 sits π3 after it, since 5π6 − π2 = 5π6 − 3π6 = 2π6 = π3, so their heights match. (b) Evaluate the ends and the middle: sin(−π2) = −1, sin 0 = 0, sin(π2) = 1. That is bottom, middle, top in order, with no top or bottom strictly between, so the piece never turns around.

The trap

Cutting sine to [0, π], the top half of the circle, because it looks like a natural half. On [0, π] sine climbs and then falls, so sin(π6) = sin(5π6) = 12 still repeats, and it never reaches a negative height. Sine's piece is the right half of the circle, from the bottom to the top: [−π2, π2]. Say it to yourself: sine climbs the right side.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

A quarter lap, nothing repeated, something missing

On the angles in [0, π2], does any height repeat? Is every height from −1 to 1 reached?

Show the steps and the answer
domainrangeπ/2−11
The quarter lap only climbs, but the dashed line at −12 never meets it: negative heights are missing.
  1. Say what it asks: run the same two checks, repeats and missing heights, on the quarter lap from 0 to π2.A usable piece must pass both.
  2. From 0 to π2 the point moves from (1, 0) up to the top, (0, 1), through the first quadrant, rising the whole way.In the first quadrant each counterclockwise step lifts the point.
  3. The height climbs from sin0=0 to sin(π2)=1 and never comes back down, so no height repeats.A height that only climbs cannot return to an earlier value.
  4. But every height on this piece is between 0 and 1. The height −12, for example, is never reached.Points in the first quadrant have a y-coordinate of 0 or more.
  5. So a backward machine built on this piece would have no angle to hand back for −12: the piece has no repeats but is too short.An inverse sine that answers every height from −1 to 1 needs an angle for each of them.
Answer
  • No height repeats.
  • Only the heights in [0, 1] are reached, so every negative height is missing.
  • Sine on [0, π2] can be run backward, but only for heights from 0 to 1, so it cannot be the piece for an inverse sine that answers every height from −1 to 1.
Double-check On the graph, the quarter lap from (0, 0) to (π2, 1) stays on or above the horizontal axis, so the dashed line at height −12 never meets it.

7.2 The inverse sine

about 3 minOpen the full lesson

The rule

y= arcsin x, also written y=sin−1 x, means siny=x and −π2≤y≤π2.

Domain: [−1,1]. Range: [−π2,π2], which is −90° to 90°.

How

  1. Turn the question into a sine question: y = arcsin x asks for the angle y from −π2 to π2 with sin y = x. The input x is a height; the answer y is an angle.
  2. Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.
  3. Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.
  4. Check the answer: it lies between −π2 and π2, and its sine gives back x.

Worked example

Worked example

An exact value with a negative input

Evaluate arcsin(−32) exactly.

Show the steps and the answer
x = cos θy = sin θ−π/3
At −π3, a 60° turn clockwise, the point is (12, −32): its height is the input.
-60°300°same terminal side
−60° and 300° end at the same point, but only −60°, which is −π3, lies in the range of arcsin.
  1. Say what it asks: the input −32 is a height. Find the one angle from −π2 to π2 whose sine is −32.That is the definition of arcsin: the angle on the right half of the unit circle at the given height.
  2. Check the input: 3≈1.732, so −32≈−0.866, which is between −1 and 1.Heights on the unit circle run from −1 to 1, so this check tells you an answer exists.
  3. Drop the minus sign for a moment. The angle from 0 to π2 with sine 32 is π3, which is 60°.The point at π3 is (12, 32), so its height is 32.
  4. Put the sign back. The height is negative, so the point is below the x-axis on the right half: make the same turn clockwise, −π3.The point at −π3 is the mirror image of the point at π3 across the x-axis: same distance across, opposite height.
  5. Confirm the range: −90°<−60°<90°, so −π3 is between −π2 and π2.arcsin answers only with angles in that stretch, and on a number line −90 sits to the left of −60.
  6. Set aside 4π3 (240°) and 5π3 (300°). Both have sine −32, but both are bigger than π2.4π3 is on the left half; 5π3 is the same point as −π3, reached the long way around, so it is outside the range.
Answer
arcsin(−32) = −π3, which is −60°
Double-check Take the sine of the answer: the point at −π3 is (12, −32), so sin(−π3) = −32, the input. Second way, with the 30-60-90 triangle of hypotenuse 1: the side across from the 60° angle is 32, and at −60° the triangle hangs below the x-axis, so the height is −32.

The trap

Answering with an angle outside the range. For arcsin(−12) it is tempting to write 7π6 or 11π6: both have sine −12, but neither lies between −π2 and π2. The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −π6. Before you write any arcsin answer, check that it lies in that stretch.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

The first negative input

Evaluate arcsin(−12).

Show the steps and the answer
−π/6terminal sideinitial side
A negative angle is a clockwise turn: −π6 dips 30° below the positive x-axis.
  1. Say what it asks: find the angle from −π2 to π2 whose sine is −12.That is what arcsin means.
  2. Check the input: −12=−0.5, which is between −1 and 1.So an answer exists.
  3. Drop the sign for a moment: the angle from 0 to π2 with sine 12 is π6.The point at π6 is (32, 12).
  4. Put the sign back: the height is negative, so the point is below the x-axis on the right half. Make the same turn clockwise: −π6.The point at −π6 is the mirror image of the point at π6 across the x-axis, so its height is −12.
  5. Set aside 7π6 and 11π6. Both have sine −12, but both are bigger than π2.7π6 is on the left half; 11π6 is the same point as −π6, reached the long way around, and the range allows only the short clockwise name.
Answer
arcsin(−12) = −π6, which is −30°
Double-check The point at −π6 is (32, −12), so sin(−π6) = −12, the input; and −30° is between −90° and 90°.

7.3 The inverse cosine

about 4 minOpen the full lesson

The rule

The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0,π].

So y= arccos x, also written y=cos−1 x, means cosy=x and 0≤y≤π.
Domain of arccos: [−1,1]. Range of arccos: [0,π].

How

  1. Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
  2. Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
  3. Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to π2. An input of 0 puts it straight up, at π2. A negative input puts it on the top-left quarter, so the answer is past π2, up to π.
  4. In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
  5. Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.

Worked example

Worked example

A negative input: arccos(−12)

Find the exact value of arccos(−12). In words: the input is −12; find the one angle from 0 to π whose cosine is −12.

Show the steps and the answer
x = cos θy = sin θ2π/3
The point at 120° on the top half has x-coordinate −12, so arccos(−12) = 2π3.
  1. Check the input: −12 is between −1 and 1.Only numbers from −1 to 1 are left-right positions on the unit circle, so only they have an inverse cosine.
  2. Turn the question into a picture: find the point on the top half of the unit circle whose x-coordinate is −12.The cosine of an angle is the x-coordinate of its point, and the inverse cosine answers only with angles from 0 to π, which sweep the top half.
  3. The input is negative, so look on the top-left quarter, past π2.Left of the vertical axis every x-coordinate is negative, and the top-left quarter is the part of the top half that lies there.
  4. Start from the positive twin: the 60° point is (12,32), so cos60°=12.60° is the special angle whose point sits 12 to the right of center.
  5. Mirror that point across the vertical axis: it becomes (−12,32), at 180°−60°=120°.The mirror keeps the height, flips the sign of the x-coordinate, and turns 60° into 180° − 60°, which lands in the top-left quarter as required.
  6. Convert to radians: 120°×π180°=120π180=2π3.π radians is 180°, and 120 over 180 reduces to 2 over 3 when you divide top and bottom by 60.
  7. Write the answer: arccos(−12)=2π3.2π3 lies from 0 to π and its cosine is −12, which is exactly what the definition asks for.
Answer
arccos(−12) = 2π3, which is 120°
Double-check Take the cosine of the answer: cos 2π3 = −12, the x-coordinate of the 120° point, and 2π3 ≈ 2.09 (rounded) lies from 0 to π ≈ 3.14. The tempting −π3 fails both checks: it is below 0, and cos(−π3) = +12.

The trap

Answering a negative input with a negative angle, the way the inverse sine does: arccos(−12) = −π3 is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past π2, up to π: here 2π3. Catch the slip by taking the cosine of what you wrote: cos(−π3) = +12, the wrong sign.

Quick check

Try it before you open its steps. It is question 4 of 8 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 8

The left end, arccos(−1)

Evaluate arccos(−1). In words: the input is −1; find the angle from 0 to π whose cosine is −1.

Show the steps and the answer
x = cos θy = sin θπ
A half turn reaches the far left point (−1, 0), so arccos(−1) = π.
  1. Check the input: −1 is in [−1,1].The square bracket at −1 means −1 itself is included.
  2. Find the point on the top half whose x-coordinate is −1: it is (−1,0), at the far left.The circle has radius 1, so it reaches x = −1 at one point only, the far left.
  3. Reaching the far left takes a half turn: 180°, which is π.A half turn is half of 2π.
Answer
arccos(−1) = π
Double-check cos π = −1, and π is the right end of [0, π], included by the square bracket. Two tempting answers fail: −π also has cosine −1 but is negative, outside the range; −π2 is the inverse sine's answer for −1, and cos(−π2) = 0.

7.4 The inverse tangent

about 3 minOpen the full lesson

The rule

y= arctan x, also written y=tan−1 x, means tany=x and −π2<y<π2.

Domain: all real numbers, (−∞,∞). Range: (−π2,π2), with both ends left out. Horizontal asymptotes: y=−π2 and y=π2.

How

  1. Read arctan(a) as a question: which angle, strictly between −π2 and π2, has tangent a? The input a is a tangent value, a steepness. The answer is an angle.
  2. If a has a square root in its bottom, rewrite it to match the table: 13 = 33.
  3. Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.
  4. Find a in the tan θ column of the table and read the angle at the start of its row.
  5. Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between −π2 and π2.

Worked example

Worked example

An exact value with a negative input: arctan(−3)

Find the exact value of arctan(−3).

Show the steps and the answer
input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
Arctan reads this table upward: the cell holding −3 in the tan θ row points up to −π3.
−π/3terminal sideinitial side
A 60° clockwise turn ends below the x-axis on the right half, where tangents are negative.
  1. Say what the question asks: find the one angle θ, with −π2<θ<π2, whose tangent is −3.That is the definition of arctan. The input −3 is a tangent value, and the output must be an angle on the right half of the circle, not at its very top or bottom.
  2. Decide where to search: below the x-axis, between −π2 and 0.Tangent is height ÷ across. On the right half the across is positive, so a negative tangent needs a negative height, which means a point below the x-axis.
  3. Find −3 in the tanθ row of the table and follow the arrow up: it sits under −π3.The point at −π3 is (12, −32), and its height divided by its across is −3. Reading the table from the bottom row up is exactly what arctan does.
  4. Make sure the angle is allowed: −π3 is −60°, and −90°<−60°<90°.Other angles also have tangent −3, such as 2π3 (120°) and 5π3 (300°), but they are outside the range, so they cannot be the answer.
  5. Write the answer: arctan(−3)=−π3.−π3 is the principal value: the only angle in the range whose tangent is −3.
Answer
arctan(−3) = −π3, which is −60°
Double-check Work out tan(−π3) from its point (12, −32): (−32) ÷ 12 = (−32) × 21 = −3, the number we started with. And −π3 is strictly between −π2 and π2.

The trap

Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of 3π4, of 7π4 and of −π4, and it is tempting to write the first one that comes to mind. Only the principal value, −π4, lies strictly between −π2 and π2, so arctan(−1) = −π4. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Rung 4, a negative input: arctan(−1)

Find arctan(−1).

Show the steps and the answer
−π/4terminal sideinitial side
A 45° clockwise turn ends below the x-axis, halfway down to the bottom of the circle.
input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
The cell holding −1 in the tan θ row points up to −π4.
  1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=−1?That is the definition of arctan.
  2. −1 is negative, so search below the x-axis: θ is between −π2 and 0.On the right half the across is positive, so a negative tangent needs a negative height.
  3. A tangent of −1 means the height is the across with its sign flipped. Below the x-axis that happens 45° down, at the point (22,−22); in the tanθ row of the table, −1 sits under −π4.Height and across have the same size and opposite signs, so their quotient is −1.
  4. Name the angle by turning clockwise: −π4.The range runs from −π2 to π2, so a point below the x-axis gets a negative name. The same point is also called 7π4, but 7π4 is outside the range.
  5. Answer: arctan(−1)=−π4.It is the only allowed angle with tangent −1.
  6. Watch the gotcha: do not answer 3π4.tan 3π4 = 22 ÷ (−22) = −1 as well, but 3π4 is 135°, on the left half, outside the range.
Answer
arctan(−1) = −π4, which is −45°
Double-check tan(−π4) = (−22) ÷ 22 = −1, the number we started with, and −90° < −45° < 90°.

7.5 Exact values by the sign and the quadrant

about 4 minOpen the full lesson

The rule

Let r be the reference angle: the angle from 0 to π2 whose sine, cosine or tangent (the one being undone) equals the input without its minus sign.

A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π−r for arccos. In symbols: arcsin(−x)=−arcsin x, arctan(−x)=−arctan x, arccos(−x)=π− arccos x. The result is the principal value: the one angle inside the range.

How

  1. Name the reference angle: cover any minus sign and find the special angle from 0 to π2 whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
  2. Read the sign of the input: zero, positive or negative.
  3. Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−π2) for arcsin, the left end (π) for arccos.
  4. Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: −π2 for arcsin(−1), π for arccos(−1).
  5. Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.

Worked example

Worked example

Same input, two functions: arcsin(−22) and arccos(−22)

Find the exact values of arcsin(−22) and arccos(−22). In plain words: the input is −22 both times. First find the angle in [−π2, π2] whose sine is −22. Then find the angle in [0, π] whose cosine is −22.

Show the steps and the answer
x = cos θy = sin θ−π/4
The arcsin answer: the point below the x-axis on the right half.
x = cos θy = sin θ3π/4
The arccos answer: the point left of the y-axis on the top half.
  1. Reference angle, for both: cover the minus sign and find the angle from 0 to π2 whose sine is 22, and the one whose cosine is 22.At π4 the point on the unit circle is (22, 22). Its height (the sine) and its x-coordinate (the cosine) are both 22, so the reference angle is r = π4 for both questions.
  2. Sign, for both: the input −22 is negative.The minus sign is what moves each answer out of Quadrant I.
  3. arcsin, quadrant: pick Quadrant IV.The range [−π2, π2] is the right half of the circle, Quadrants IV and I. Sine is the height, and the height is negative only in Quadrant IV of those two.
  4. arcsin, angle: write −π4.Inside the range, Quadrant IV is reached by turning r clockwise, and a clockwise turn is a negative angle.
  5. arccos, quadrant: pick Quadrant II.The range [0, π] is the top half of the circle, Quadrants I and II. Cosine is the x-coordinate, and x is negative only in Quadrant II of those two.
  6. arccos, angle: write π−π4=4π4−π4=3π4.The Quadrant II angle with reference angle r stops r short of a half turn, so it is π − r. Writing π as 4π4 gives both fractions the bottom 4, and then the tops subtract: 4π − π = 3π.
Answer
  • arcsin(−22) = −π4
  • arccos(−22) = 3π4
Double-check Evaluate each answer. The point at −π4 is (22, −22), so sin(−π4) = −22, the input, and −π4 lies in [−π2, π2]. The point at 3π4 is (−22, 22), so cos 3π4 = −22, the input, and 3π4 lies in [0, π]. In degrees the answers are −45° and 180° − 45° = 135°. Same input, two different angles, each inside its own range.

The trap

The most common slip here is the right point with the wrong name. For arcsin(−22) many people write 7π4, because the unit circle they learned runs from 0 to 2π. The point is right, but 7π4 is not between −π2 and π2, so it is not the principal value. Name the same point by turning clockwise: −π4. And 5π4, in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Answers at the ends of the range

Find arcsin(−1) and arccos(−1). In plain words: find the angle in [−π2, π2] whose sine is −1, then the angle in [0, π] whose cosine is −1.

Show the steps and the answer
x = cos θy = sin θ−π/2
Straight down: height −1.
x = cos θy = sin θπ
The left end: x-coordinate −1.
  1. arcsin(−1), reference angle: the angle from 0 to π2 with sine 1 is π2.At π2 the point is (0, 1), straight up, with height 1.
  2. arcsin(−1), sign and angle: negative, so the answer is −r=−π2.For arcsin a negative input means a clockwise turn. Turning π2 clockwise points straight down, the bottom end of the range.
  3. arccos(−1), reference angle: the angle from 0 to π2 with cosine 1 is 0.At 0 the point is (1, 0), with x-coordinate 1.
  4. arccos(−1), sign and angle: negative, so the answer is π−r=π−0=π.For arccos a negative input means mirroring across the y-axis: (1, 0) mirrors to (−1, 0), which sits at a half turn, π.
Answer
  • arcsin(−1) = −π2
  • arccos(−1) = π
Double-check At −π2 the point is (0, −1), so sin(−π2) = −1, and −π2 is the bottom end of [−π2, π2], included because of the square bracket. At π the point is (−1, 0), so cos π = −1, and π is the top end of [0, π], also included. The gotcha: these answers sit on an axis, not inside a quadrant, and the four steps still work.

7.6 A function and its inverse undo each other, with conditions

Open the full lesson

The rule

sin(arcsin x) =x for x in [−1,1] (undefined for other x); arcsin(sinx)=x for x in [−π2,π2], and for any other x it is the angle in [−π2,π2] with the same sine.

cos(arccos x) =x for x in [−1,1] (undefined for other x); arccos(cosx)=x for x in [0,π], and for any other x it is the angle in [0,π] with the same cosine.

How

  1. Say what the problem asks, reading from the inside out: arcsin(sin θ) means 'take the sine of θ, then find the angle in [−π2, π2] with that sine'.
  2. Name the outside function; it decides the test. A trig function outside needs the number inside to be one its inverse accepts: from −1 to 1 for sin and cos, any number for tan. An inverse outside needs the angle inside to lie in its range: [−π2, π2] for arcsin, [0, π] for arccos, (−π2, π2) for arctan.
  3. If the test passes, the two undo each other, and the answer is the number or angle you started with.
  4. If a trig function is outside and the test fails, the inverse does not exist there: write undefined.
  5. If an inverse is outside and the test fails, do not cancel. First make sure the inside value exists: tan(π2) does not, so arctan(tan(π2)) is undefined. Then find the inside value exactly from the unit circle, then find the angle in the range with that value by the four-step method of the last lesson.
  6. Check: with an inverse outside, the answer lies in that inverse's range, and its sine, cosine or tangent equals the inside value; with sin, cos or tan outside, the answer is the number inside the inverse, which that inverse had to accept.

Worked example

Worked example

An angle outside the range: arcsin(sin(5π6))

Find the exact value of arcsin(sin(5π6)).

Show the steps and the answer
x = cos θy = sin θ5π/6
The point for 5π6 is (−32, 12): height 12, on the left half, where arcsin never answers.
x = cos θy = sin θπ/6
The point for π6 is (32, 12): the same height 12, on the right half, so this is the angle arcsin names.
  1. Say what it asks: take the sine of 5π6, then find the angle in [−π2,π2] whose sine is that number.The inner function acts first. The outside function is arcsin, and arcsin answers only with angles from −π2 to π2.
  2. Test the angle against the range. Give π2 a bottom of 6: π2=3π6. Since 5π6>3π6, the angle 5π6 is outside [−π2,π2].With the same bottom, comparing fractions means comparing tops, and 5 > 3. Had the angle passed, the answer would be 5π6 itself; it failed, so arcsin and sine may not be canceled.
  3. Find the inside value. 5π6 is in Quadrant II, its reference angle is π−5π6=6π6−5π6=π6, and sine is positive there, so sin(5π6)=sin(π6)=12.5π6 lies between π2 = 3π6 and π = 6π6, which is Quadrant II. There the point on the unit circle is above the x-axis, so its height, the sine, is positive.
  4. Replace the inside by its value: arcsin(sin(5π6))= arcsin(12).What remains is a plain inverse sine of a special value, the kind of problem the last lesson solved.
  5. Find arcsin(12) with the four-step method: the reference angle is π6, because sin(π6)=12; the input is positive; so the answer is in Quadrant I, the part of the range from 0 to π2; the angle is π6.arcsin answers a positive input with an angle between 0 and π2, and π6 is that angle.
Answer
π6
Double-check Second way, by the mirror: the points for 5π6 and π6 are mirror images across the y-axis, so they have the same height, 12, and π6 is the one on the right half, where arcsin answers. Evaluating the answer confirms it: sin(π6) = 12 = sin(5π6), and −π2 ≤ π6 ≤ π2.

The trap

Canceling on sight. arcsin and sine look as if they cross out, so it is tempting to write arcsin(sin(5π6)) = 5π6. Before you cancel, test the angle against the range of the outside inverse. 5π6 is past π2 = 3π6, so it fails; work from the inside instead: sin(5π6) = 12, then arcsin(12) = π6.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Inverse outside, an angle in Quadrant II

Find arcsin(sin(2π3)).

Show the steps and the answer
x = cos θy = sin θ2π/3
The point for 2π3 is at height 32 on the left half; its mirror on the right half is the point for π3.
  1. Say what it asks: take the sine of 2π3, then find the angle in [−π2,π2] with that sine.arcsin is on the outside, and arcsin answers only from −π2 to π2.
  2. Test the angle: with a bottom of 6, 2π3=4π6 and π2=3π6. Since 4π6>3π6, the angle is outside the range.The test fails, so arcsin and sine may not be canceled.
  3. Find the inside value: 2π3 is in Quadrant II, its reference angle is π−2π3=3π3−2π3=π3, and sine is positive there, so sin(2π3)=32.2π3 = 4π6 lies between π2 = 3π6 and π = 6π6. In Quadrant II the point is above the x-axis, so its height, the sine, is positive.
  4. Finish: arcsin(32) has reference angle π3 and a positive input, so it is the Quadrant I angle π3.This is the four-step method: a positive input puts the answer between 0 and π2.
Answer
π3
Double-check Second way, by the mirror: the point for 2π3 reflected across the y-axis is the point for π − 2π3 = π3, at the same height, on the right half. And sin(π3) = 32, with π3 inside [−π2, π2].

7.7 Mixing the functions with a right triangle

about 4 minOpen the full lesson

The rule

For an expression such as cos(arcsin a): let θ= arcsin a, the principal value; draw θ in the quadrant that its range and the sign of a allow; label two sides from a, with a minus sign on a leg that points left or down; find the third side from adj2+ opp2= hyp2; then read sinθ=opphyp,cosθ=adjhyp or tanθ=oppadj.

When θ lands on an axis (a=0, or a=1 or −1 for arcsin and arccos) there is no triangle: read the value from the point on the unit circle, for example cos(arcsin 1) =cosπ2=0. For a letter: cos(arcsin x) =1−x2, for −1≤x≤1.

How

  1. Say it in words and name the inside angle: cos(arcsin(35)) is the cosine of θ, where θ = arcsin(35), so sin θ = 35.
  2. Pick θ's quadrant from the table: a positive input gives Quadrant I; a negative input gives Quadrant IV for the inverse sine and the inverse tangent, and Quadrant II for the inverse cosine. An input of 0, 1 or −1 to the inverse sine or inverse cosine, or 0 to the inverse tangent, puts the angle on an axis: read those from the unit circle.
  3. Draw θ from the positive x-axis into that quadrant, and drop a line from the end of its slanted side to the x-axis. The right triangle this makes has the reference angle at the origin; giving its legs signs turns its ratios into the values for θ itself.
  4. Label the two sides the input gives: a sine gives opphyp, a cosine gives adjhyp, a tangent gives oppadj. A leg that points left or down is negative; the hypotenuse is always positive.
  5. Find the third side with adj2 + opp2 = hyp2: take the positive square root, then give a leg the sign of the direction it points.
  6. Read the outside function as a ratio of the signed sides with SOH-CAH-TOA, then check the sign with All Silver Tea Cups.

Worked example

Worked example

The cosine of the angle whose sine is three fifths

Find the exact value of cos(arcsin(35)).

Show the steps and the answer
xyθx = 4y = 3rP(4, 3)Ox = 4 (4 right) y = 3 (3 up) r = 5the ray from O through P (and beyond) = the terminal side
θ = arcsin(35) drawn in Quadrant I: up 3, slanted side 5, so the across leg is 4 and cos θ = 45.
  1. Say what it asks: the cosine of the angle whose sine is 35. Name that angle θ= arcsin(35), so sinθ=35 and −π2≤θ≤π2.This is the definition of the inverse sine: arcsin(35) is the one angle in [−π2, π2] whose sine is 35, its principal value. Naming it splits one tangled question into two small ones: what does θ look like, and what is cos θ.
  2. Pick the quadrant: the input 35 is positive, so θ is between 0 and π2, in Quadrant I.The inverse sine answers only in the right half of the circle, and there the sine is positive only above the x-axis. Quadrant II also has positive sines, but arcsin never answers past π2.
  3. Label two sides: sinθ=opphyp=35, so the opposite leg is 3 and the hypotenuse is 5.SOH: sine is opposite over hypotenuse, so the input hands you those two sides directly.
  4. Find the adjacent leg: adj2+32=52, so adj2+9=25,adj2=16, and adj =4. Plug back: 42+32=16+9=25=52.This finds the one missing side. The Pythagorean theorem says the legs squared add to the hypotenuse squared; subtracting 9 from both sides leaves adj2 alone; 4 × 4 = 16. Take the positive root because in Quadrant I the adjacent leg points right.
  5. Read the outside function: cosθ=adjhyp=45.CAH: cosine is adjacent over hypotenuse.
  6. Check the sign: θ is in Quadrant I, where all three functions are positive, so 45 keeps its plus sign.All Silver Tea Cups: in Quadrant I, All are positive.
Answer
cos(arcsin(35)) = 45
Double-check A second way, with no triangle: every angle has sin2θ + cos2θ = 1, because the point (cos θ, sin θ) sits on the unit circle x2 + y2 = 1. So cos2θ = 1 − (35)2 = 1 − 925 = 1625, and cos θ is 45 or −45. θ is in Quadrant I, where cosine is positive, so cos θ = 45, the same answer. Going back, the triangle 3, 4, 5 gives sin θ = 35, the input.

The trap

Drawing every triangle in Quadrant I. A negative input moves the inside angle: to Quadrant IV for the inverse sine and the inverse tangent, to Quadrant II for the inverse cosine, and one leg turns negative. An input of −1 to the inverse sine or cosine puts the angle on an axis instead, where no triangle forms; read that answer from the unit circle. Skip this and you get the right size with the wrong sign: 125 instead of −125 for tan(arccos(−513)). Decide the quadrant before you draw anything.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

A negative input to the inverse cosine

Find the exact value of tan(arccos(−513)).

Show the steps and the answer
x = cos θy = sin θθ = arccos(−5/13)
The inverse cosine of a negative number lands in Quadrant II, across negative and up positive.
  1. Say what it asks: the tangent of the angle whose cosine is −513. Name it θ= arccos(−513), so cosθ=−513 and 0≤θ≤π.Definition of the inverse cosine.
  2. Pick the quadrant: the input is negative, so θ is between π2 and π, in Quadrant II.The inverse cosine answers in the top half of the circle; a negative cosine there means left of the y-axis. It can never be Quadrant III or IV, because arccos never answers past π or below 0.
  3. Label with signs: cosθ=adjhyp=−513, so the adjacent leg is −5 and the hypotenuse is 13.In Quadrant II the adjacent leg points left, so it carries the minus sign; the hypotenuse stays positive.
  4. Find the opposite leg: (−5)2+ opp2=132, so 25+ opp2=169, opp2=144, and opp =12. Plug back: 25+144=169=132.Subtract 25 from both sides; 12 × 12 = 144. Positive because in Quadrant II the opposite leg points up.
  5. Read the outside: tanθ=oppadj=12−5=−125.TOA; a positive divided by a negative is negative. Dropping the minus sign would give 125, which answers a different question, tan(arccos(513)).
Answer
−125
Double-check Find the sine first, then divide: sin θ = opphyp = 1213, so tan θ = sinθcosθ = 1213 ÷ (−513) = 1213 × (−135) = −125. Sign: in Quadrant II only sine is positive, so the tangent is negative.

7.8 Inverse values on a calculator, and why one answer is not all the answers

about 7 minOpen the full lesson

The rule

The sin−1,cos−1 and tan−1 keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin−1 k in [−π2,π2],cos−1 k in [0,π],tan−1 k in (−π2,π2), named in the units the mode is set to.

On [0,2π),sint=k and cost=k have two solutions when −1<k<1, one when k=1 or k=−1, and none when k<−1 or k > 1; tant=k has two for every k. With the reference angle α= the key pressed on |k|, the solutions are the angles among α,π−α,π+α and 2π−α (in degrees α,180°−α,180°+α,360°−α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0,2π) that solves the equation (sint=0 at 0 and π,cost=0 at π2 and 3π2,tant=0 at 0 and π).

How

  1. Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
  2. Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is π2; degree mode shows 90.
  3. Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
  4. Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
  5. Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
  6. Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.

Worked example

Worked example

Solving tan θ = 1.8 on [0°, 360°): the key gives one angle, and the second is 180° later

Solve tan θ = 1.8 on [0°, 360°). Round each answer to the nearest tenth of a degree.

Show the steps and the answer
P
Unit circle with P at about 240.9°.
  1. Read the units. The interval [0°,360°) has a degree sign, so set the calculator to degree mode in its mode or setup menu.The inverse keys answer in whatever units the mode is set to. In radian mode tan⁻¹(1.8) would show 1.063697822, which is a radian measure, but the question asks for degrees.
  2. Test the mode with one press: sin−1(1). The screen shows 90.90 is the degree measure of the angle whose sine is 1, so the mode is right. If the screen showed 1.570796327, which is π2, the calculator would still be in radian mode.
  3. Count the solutions before computing. On [0°,360°),tanθ=k has two solutions for every k, so tanθ=1.8 has two, even though 1.8 > 1.Sine and cosine stay between −1 and 1, so sin θ = 1.8 would have no solution. Tangent takes every real value. The key shows only one angle, so the work is not finished when the screen gives its answer.
  4. Press SHIFT (or 2nd) and then tan to get tan−1. Type (1.8) and press enter. The screen shows 60.9453959. Call this angle α.tan⁻¹ is printed above tan as a second function. The x⁻¹ key is a different key: it would give 11.8 ≈ 0.5555555556, which is a reciprocal, not an angle. Because 1.8 is positive, the principal value is also the reference angle, α = tan⁻¹(|k|).
  5. Pick the quadrants. tanθ>0 in Quadrants I and III, so the solutions are θ=α and θ=180°+α.For the point (x, y) on the unit circle, tan θ = yx. This is positive when x and y have the same sign, which happens in Quadrants I and III. Of α, 180° − α, 180° + α and 360° − α, only α and 180° + α lie in those quadrants. The angle 180° − α is in Quadrant II, where tan θ = −1.8.
  6. Right after the α line, type 180+ Ans. The screen shows 240.9453959.Ans holds every digit of α, so no rounding enters from retyping. The key alone can never show this angle, because tan⁻¹ answers only between −90° and 90°. The point at 180° + α is directly opposite the point at α. Its coordinates are (−x, −y), and −y−x = yx = 1.8.
  7. Round only now, to the nearest tenth of a degree: θ≈60.9° and θ≈240.9°.The question asks for tenths. In both unrounded values the hundredths digit is 4, so both round down. Rounding once, at the end, keeps the answers accurate, and ≈ shows that they are rounded.
Answer
θ ≈ 60.9° or θ ≈ 240.9°
Double-check Both answers lie in [0°, 360°): 60.9° is in Quadrant I and 240.9° is in Quadrant III. They differ by exactly 180°, the period of tangent. In degree mode, tan(60.9453959) and tan(240.9453959) each show 1.8. For contrast, the Quadrant II candidate 180° − α gives tan(119.0546041) = −1.8, so it is not a solution. Testing the rounded angles is only approximate: tan 60.9° ≈ 1.7966, a little under 1.8, because tangent climbs steeply near 61°. That is why the check uses the unrounded values.

Work to write

  1. Degree mode: sin⁻¹(1) shows 90
  2. tan θ = k has two solutions on [0°, 360°) for every k
  3. α = tan⁻¹(1.8) ≈ 60.9453959°
  4. tan θ > 0 in Quadrants I and III, so θ = α or θ = 180° + α
  5. 180° + α ≈ 240.9453959°
  6. θ ≈ 60.9° or θ ≈ 240.9°

The trap

The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Two answers for a positive cosine, a different mirror

Solve cos t = 0.3 on [0, 2π). Round each answer to four decimal places.

Show the steps and the answer
x = cos θy = sin θt ≈ 1.2661
Quadrant I: left-right position 0.3.
x = cos θy = sin θt ≈ 5.0171
The mirror image across the x-axis, in Quadrant IV, has the same left-right position 0.3.
  1. Say what it asks: every angle t in one full turn, from 0 up to but not including 2π, whose cosine is 0.3.Cosine is the left-right position of the point on the unit circle, and a full turn passes the position 0.3 twice.
  2. Set radian mode and test: sin−1(1) shows 1.570796327. Check that 0.3 is between −1 and 1.The interval uses π, and a cosine between −1 and 1 has angles to find.
  3. Press cos−1(0.3): the screen shows 1.266103673. Call it α.0.3 is positive, so the principal value, which lies in [0, π], is in Quadrant I: it is the reference angle.
  4. Cosine is positive in Quadrants I and IV.The point is right of the vertical axis there (All Silver Tea Cups: Cosine in IV).
  5. Quadrant I: t=α≈1.266103673. Quadrant IV: type 2π−cos−1(0.3), which shows 5.017081634.Mirroring the point across the x-axis keeps its left-right position 0.3, and the mirror stops α short of a full turn: 2π − α. The sine pattern π − α would mirror across the vertical axis and give cosine −0.3.
  6. Round to four decimal places: 1.2661 and 5.0171.In 1.266103673 the fifth decimal digit is 0, so 1.2661 stays. In 5.017081634 the fifth decimal digit is 8, so the 0 before it goes up to 1.
Answer
  • t ≈ 1.2661
  • t ≈ 5.0171
Double-check Press cos(1.2661) and cos(5.0171): both show 0.3000 when rounded to four decimal places. Second way: 1.2661 + 5.0171 = 6.2832 ≈ 2π, as two cosine answers, mirror images across the x-axis, must add to a full turn.

8 Trigonometric equations

8 lessonsOpen the unit's crash course

8.1 What it means to solve a trigonometric equation

Open the full lesson

The rule

A solution of a trigonometric equation is an angle t that makes it true.

For sint=c with −1<c<1 and c≠0, one turn, 0≤t<2π, holds exactly two solutions, in the two quadrants where sine has the sign of c; and if t is a solution, so is t plus or minus any number of full turns 2π.

How

  1. Read the question in plain words. 'Solve sin t = c on [0, 2π)' asks for every solution on one turn: every angle from 0 up to, but not including, 2π whose sine is c.
  2. To test one angle, work out its sine and compare it with c. Equal means the angle is a solution; different means it is not.
  3. To find every solution on one turn, follow the strategy in this lesson. When −1 < c < 1 and c ≠ 0, do not stop until you have two angles.
  4. To list solutions on other turns, add 2π to each answer once for every turn forward, or take 2π away once for every turn back.

Worked example

Worked example

Every angle whose sine is 32

Solve sin t = 32 on one turn, 0 ≤ t < 2π. Then give the two solutions on the next turn, 2π ≤ t < 4π.

Show the steps and the answer
x = cos θy = sin θπ/3
The point at π3 stands 32 above the horizontal axis.
x = cos θy = sin θ2π/3
Its mirror image at 2π3 stands at the same height on the left.
  1. Say what it asks: the output of sine is 32; find every angle t in one turn that gives that output, then the ones in the turn after.Solving means finding all the angles that make the equation true, not stopping at the first one.
  2. Size up the value: 32≈0.87 (rounded). It is positive, it is between −1 and 1, and it is neither 0 nor 1.sin t is a height on a circle of radius 1, so only values from −1 to 1 can happen; a value strictly between 0 and 1 gives two points, one in quadrant I and one in quadrant II.
  3. Picture the unit circle with a level line at height 32, high up, a little below the top point.The solutions are the angles of the points of the circle that sit at that height.
  4. The line meets the circle twice: once right of the vertical axis, in quadrant I, and once left of it, in quadrant II.Sine is positive above the horizontal axis, in quadrants I and II, and the two crossings are mirror images across the vertical axis.
  5. The quadrant I point is (12,32), at the special angle t=π3.The special angles refresher gives sin π3 = 32, so this point is at the right height.
  6. Its mirror image across the vertical axis is (−12,32), which the special angles refresher lists at t=2π3.The mirror flips the sign of the x coordinate and keeps the height, so sin 2π3 = 32 too.
  7. Answer for one turn: t=π3 and t=2π3.No other point of the circle is at that height, and each point has exactly one angle in 0 ≤ t < 2π.
  8. Next turn: add 2π, written as 6π3, to each. π3+6π3=7π3 and 2π3+6π3=8π3.A full turn brings each point back to the same spot, so its height, the sine, is unchanged; writing 2π as 6π3 gives the fractions the same bottom.
  9. Make sure both are in the next turn: 2π=6π3 and 4π=12π3, and 7π3 and 8π3 lie between them.The question asked for 2π ≤ t < 4π only, and 6 ≤ 7 < 12 and 6 ≤ 8 < 12.
Answer
  • One turn: t = π3 and t = 2π3
  • Next turn: t = 7π3 and t = 8π3
Double-check Put each answer back: sin π3 = 32 and sin 2π3 = 32 from the special angles, and 7π3 − 2π = π3 and 8π3 − 2π = 2π3, the same two points. Second way, by the mirror: twins above the horizontal axis sit equally far on either side of the top point π2. π2 − π3 = 3π6 − 2π6 = π6, and 2π3 − π2 = 4π6 − 3π6 = π6. The distances match, so the pair is right.

The trap

Stopping at the first angle you find. When −1 < c < 1 and c ≠ 0, sin t = c has a second solution on one turn, the mirror image across the vertical axis, and every solution comes back after each full turn. Before you finish, ask two questions: did I find both points, and does the question want one turn or more?

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

Both solutions on one turn

Solve sin t = 22 on one turn, 0 ≤ t < 2π.

Show the steps and the answer
x = cos θy = sin θ3π/4
The twin of the π4 point, on the left, at the same height 22.
  1. Say what it asks: find every angle t with 0≤t<2π whose point on the unit circle is at height 22.The solutions on one turn are all the angles in that stretch that make the equation true.
  2. Size up the value: 22≈0.71 (rounded) is positive and strictly between 0 and 1.So the level line crosses the circle twice, in quadrants I and II, where sine is positive.
  3. Quadrant I: t=π4, the angle tested in rung 1.sinπ4=22.
  4. Quadrant II: the mirror image of (22,22) across the vertical axis is (−22,22), which the special angles list at t=3π4.The mirror flips the sign of x and keeps the height 22.
  5. Stop at two.A straight line meets a circle at most twice, so there is no third point at that height.
Answer
t = π4 and t = 3π4
Double-check Put back: sin 3π4 = 22 in the special angles, and sin π4 = 22 from rung 1. Second way: twins above the horizontal axis sit equally far on either side of the top point π2, so they add up to 2 × π2 = π. Here π4 + 3π4 = 4π4 = π.

8.2 Solving sin t = c, cos t = c and tan t = c on one turn

Open the full lesson

The rule

For 0 ≤ t < 2π, when c is not an axis value and the function can reach it: the size of c gives the reference angle α, the table angle whose sine, cosine or tangent has that size; the sign of c gives the two quadrants where that function has that sign; the answers are α in I, π − α in II, π + α in III and 2π − α in IV.

The axis values, 0, 1 and −1 for sine and cosine and 0 for tangent, put the answers on the axes instead, and sine and cosine have no answer when c is above 1 or below −1.

How

  1. Get the function alone on one side: sin t = c, cos t = c or tan t = c.
  2. Say what the question asks: every angle t with 0 ≤ t < 2π whose sine (or cosine, or tangent) equals c.
  3. Rule out the special cases. For sine or cosine, c > 1 or c < −1 has no solution. If c is 0, or 1 or −1 for sine and cosine, the answers sit on the axes: read them off the circle, check them and stop.
  4. Drop the sign of c and find that size in your function's column of the table. The angle at the start of that row is the reference angle α.
  5. Use the sign of c and All Students Take Calculus to pick the two quadrants where your function has that sign.
  6. Place α in each of those quadrants: α in I, π − α in II, π + α in III, 2π − α in IV. Rewrite π or 2π with the same bottom as α, then combine the tops.
  7. Check: put each answer back into the original equation. Name its quadrant and reference angle, read the size from the table, attach that quadrant's sign, and confirm you get c.

Worked example

Worked example

Worked example: cos t = −32 on one turn

Solve cos t = −32 for 0 ≤ t < 2π. Give exact answers.

Show the steps and the answer
x = cos θy = sin θP
The chain for cos 150°, which is 5π6: Quadrant II, reference angle 30°, a negative sign, value −32.
x = cos θy = sin θP
The chain for cos 210°, which is 7π6: Quadrant III, reference angle 30°, a negative sign, value −32.
  1. Say what it asks: which angles t, from 0 up to but not including 2π, put the point of the unit circle at x=−32, a little less than 1 unit left of the center?Cosine is the x coordinate. We know the output, so we are looking for every input angle that produces it.
  2. Check the special cases: −32 is about −0.87, between −1 and 1, and it is not 0, 1 or −1.Outside −1 to 1 there would be no solution, and 0, 1 or −1 would put the answers on the axes. Neither happens, so the main method applies.
  3. Drop the sign: the size is 32. In the cosα column of the table, 32 sits in the π6 row, so the reference angle is α=π6.All four mirror points with reference angle π6 have a cosine of size 32; the table names the Quadrant I one.
  4. c is negative, and cosine is negative in Quadrants II and III.All Students Take Calculus: cosine is positive only in I (All) and IV (Calculus), so it is negative in II and III, left of the y-axis.
  5. Quadrant II: t=π−π6=6π6−π6=5π6, which is 150°.A Quadrant II angle stops short of a half turn by α. Writing π as 6π6 gives one bottom, so the tops subtract: 6 − 1 = 5.
  6. Quadrant III: t=π+π6=6π6+π6=7π6, which is 210°.A Quadrant III angle goes past a half turn by α: 6 + 1 = 7.
  7. Both answers lie between 0 and 2π=12π6, so both are solutions on one turn.The question asks only for angles on this turn, and 5 and 7 are both less than 12.
Answer
  • t=5π6
  • t=7π6
Double-check Put each answer back. 5π6 is in Quadrant II with reference angle π6, and cosine is negative there, so cos 5π6 = −32. 7π6 is in Quadrant III with reference angle π6, cosine negative again, so cos 7π6 = −32. A second way: the points are (−32, 12) and (−32, −12), mirror images across the x-axis, and both x coordinates are −32.

The trap

Stopping at the table. The table gives only the size of c, so answering t = π6 to sin t = −12 loses the sign: sin π6 is +12. After the table, always pick the two quadrants from the sign of c, write an angle in each, and put both answers back into the equation.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

A negative value, and a tempting negative angle

Solve sin t = −12 for 0 ≤ t < 2π.

Show the steps and the answer
-30°330°same terminal side
−30° and 330° end on the same side: −π6 and 11π6 name one point, but only 11π6 is on the turn.
11 of 12 wedges, each π/6
A full turn is twelve wedges of π6; take one away and eleven are left, so 2π − π6 = 11π6.
  1. Say what it asks: which angles t on one turn put the point at height −12, half a unit below the center?Sine is the height, and a negative height is below the x-axis.
  2. Drop the sign: 12 sits in the π6 row of the sinα column, so α=π6.The table gives only sizes; the sign is the next step.
  3. c is negative, and sine is negative in Quadrants III and IV.Below the x-axis every height is negative.
  4. Quadrant III: t=π+π6=6π6+π6=7π6.A Quadrant III angle goes past a half turn by α; π is 6π6, and 6 + 1 = 7.
  5. Quadrant IV: t=2π−π6=12π6−π6=11π6.Gotcha: turning back π6 from 0 gives −π6, which ends at the same point but is not between 0 and 2π. A full turn minus π6 reaches that point and stays on the turn.
Answer
  • t=7π6
  • t=11π6
Double-check 7π6 is in Quadrant III with reference angle π6, and sine is negative there, so sin 7π6 = −12. 11π6 is in Quadrant IV with reference angle π6, and sine is negative there too, so sin 11π6 = −12. Second way: 7π6 + 11π6 = 18π6 = 3π, the sum two sine answers below the x-axis always have.

8.3 Writing every solution with the period

Open the full lesson

The rule

If t=a solves sint=c or cost=c, so does t=a+2kπ for every integer k; if t=a solves tant=c, so does t=a+kπ.

The general solution: each solution on one turn +2kπ for sine and cosine, the one solution in [0,π)+kπ for tangent, where k is any integer.

How

  1. Find every solution on one turn, [0, 2π), with the reference angle and quadrant method from the lesson before.
  2. Sine or cosine: write each one-turn answer + 2kπ. Each such list is a family: one starting angle plus every whole number of full turns, forward or back.
  3. Tangent: keep the one answer in [0, π) and write it + kπ. The other one-turn answer is that one + π, so the family already holds it.
  4. Finish with the words: where k is any integer.
  5. Check: put k = 1 and k = −1 into each family and confirm that each angle lands on a point with the right value.

Worked example

Worked example

Every solution of a cosine equation

Write every solution of cos t = −22.

Show the steps and the answer
x = cos θy = sin θP
cos 495°. Drop the full turn to reach 135°, in quadrant II with reference angle 45°, so the value is −22, the same as at 3π4.
  1. Say what it asks: find every angle t, on every turn and in both directions, whose point on the unit circle has x=−22.cos t is the x coordinate of the point at angle t.
  2. Find the reference angle: π4.The reference angle comes from the value without its sign, and the special-angle table gives cos π4 = 22.
  3. Pick the quadrants: II and III.x is negative on the left half of the circle, so cosine is negative in quadrants II and III.
  4. Build the one-turn answers: t=π−π4=3π4 and t=π+π4=5π4.In quadrant II the angle is π minus the reference angle, in quadrant III it is π plus it. With π = 4π4: 4π4 − π4 = 3π4 and 4π4 + π4 = 5π4.
  5. Add 2kπ to each: t=3π4+2kπ and t=5π4+2kπ.Cosine repeats only after a full turn. The two answers are 5π4 − 3π4 = 2π4 = π2 apart, not π, so they stay two families.
  6. Say what k may be: any integer.k = 0 gives the one-turn answers, positive k adds full turns forward, negative k turns back.
Answer
  • t=3π4+2kπ
  • t=5π4+2kπ
  • where k is any integer
Double-check A second way, with degrees and a clockwise turn. k = 1 in the first family gives 3π4 + 8π4 = 11π4, which is 495°. Drop the full turn: 495° − 360° = 135°, in quadrant II with reference angle 45°, so cos 495° = −22. k = −1 in the second family gives 5π4 − 8π4 = −3π4, a 135° turn clockwise, which ends in quadrant III at (−22, −22). Both land where x = −22.

The trap

Mixing up the two steps. A family of sine or cosine solutions steps by a full turn, + 2kπ; a family of tangent solutions steps by a half turn, + kπ. For cos t = −22, writing 3π4 + kπ would make 7π4 (k = 1) a solution, but cos 7π4 = 22, the wrong sign. Before you write + kπ, ask: is this tangent? The one other case is sin t = 0 or cos t = 0, whose two families sit half a turn apart and may be joined into one with + kπ.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

Tangent steps by half a turn, tan t = 1

Write every solution of tan t = 1.

Show the steps and the answer
x = cos θy = sin θP
At 225°, which is 5π4, x and y are both −22: equal, so their ratio is 1.
  1. Say what it asks: every angle t whose point (x, y) has yx=1, which means y and x are equal.tan t = yx, and a number divided by itself is 1.
  2. Find the reference angle: π4.At π4 the point is (22, 22): x and y are equal.
  3. Pick the quadrants and build the one-turn answers: t=π4 and t=π+π4=5π4.yx is positive when x and y have the same sign: both positive in quadrant I, both negative in quadrant III.
  4. Measure the gap: 5π4−π4=4π4=π.The answers are half a turn apart: tangent's period showing up.
  5. Keep the answer in [0,π),π4, and write t=π4+kπ, where k is any integer.k = 1 gives 5π4, so one family holds both one-turn answers. A second family would list the same angles again.
Answer
t = π4 + kπ, where k is any integer
Double-check k = 1 gives 5π4, the point (−22, −22), and (−22) ÷ (−22) = 1. k = 2 gives π4 + 2π = 9π4, one full turn past π4, the same point, so the tangent is 1 again.

8.4 Equations with a multiple of the angle

Open the full lesson

The rule

To solve a trigonometric equation such as sin(nt) =c, cos(nt) =c or tan(nt) =c for 0≤t<2π: the inside angle u= nt runs over 0≤u<2nπ, which is n full turns.

Find every u on that stretch, then divide each one by n. For a positive whole number n, that gives n times as many solutions as the plain equation, such as sint=c, has on one turn.

How

  1. Say what is asked: every solution on one turn, that is, every angle t with 0 ≤ t < 2π that makes the equation true.
  2. Get the sine, cosine or tangent alone on one side, the way you would solve for x.
  3. Give the inside angle, the angle the function acts on, a nickname: u = 2t (or u = 3t, and so on).
  4. Stretch the interval: multiply both ends of 0 ≤ t < 2π by the number in front of t. For 2t that gives 0 ≤ u < 4π, two turns.
  5. Solve for u on the first turn with the reference angle and the quadrant signs.
  6. Add 2π to each of those answers, again and again, keeping every result that is below the new end.
  7. Divide each u by the number in front of t, and simplify the fraction.
  8. Check: the count should be the number of turns times the count on one turn; then put each t back into the original equation.

Worked example

Worked example

Sin 2t = 12 on one turn: four answers

Solve sin 2t = 12 for 0 ≤ t < 2π.

Show the steps and the answer
30°390°same terminal side
π6 (30°) and 13π6 (390°) end on the same side, so both have sine 12.
  1. Say what the question asks: find every angle t on one turn whose double, 2t, has sine 12.Naming the target reminds you that the answer is a list of every such t, not a single angle.
  2. Call the inside angle u, so u=2t and the equation reads sinu=12. Multiply each part of 0≤t<2π by 2: 0≤u<4π.u is a nickname for 2t, which turns the problem into the basic kind you already solve. Multiplying by the positive number 2 keeps the inequality signs, and the stretch from 0 to 4π is two full turns, so both must be searched.
  3. Solve sinu=12 on the first turn. The reference angle is π6, because sinπ6=12. Sine is positive in quadrants I and II, so u=π6 and u=π−π6=5π6.This is the method for one turn: the special value gives the reference angle, and the sign of 12 picks the quadrants.
  4. Add one full turn, 2π=12π6, to each: u=π6+12π6=13π6 and u=5π6+12π6=17π6.On the second lap the angle passes the same two spots again: adding 2π brings the point back to where it was. Both values are less than 4π = 24π6, so both stay.
  5. Try one more turn: 13π6+12π6=25π6 and 17π6+12π6=29π6.Both are more than 24π6 = 4π, past the end of the stretch, so the search stops with four values of u: π6, 5π6, 13π6, 17π6.
  6. Divide each u by 2: t=π12,5π12,13π12,17π12.u = 2t, so t is half of u. Halving a fraction doubles its bottom: 13π6 ÷ 2 = 13π12.
  7. Put each one back. 2·π12=π6 and 2·5π12=5π6: both have sine 12. 2·13π12=13π6, which is π6 plus a full turn, and 2·17π12=17π6, which is 5π6 plus a full turn: sine 12 again.Every answer must make the original equation true, and adding a full turn never changes a sine.
Answer
  • t=π12
  • t=5π12
  • t=13π12
  • t=17π12
Double-check Second way, with the general solution: every solution of sin u = 12 is u = π6 + 2kπ or u = 5π6 + 2kπ. Halve them: t = π12 + kπ or t = 5π12 + kπ. k = 0 gives π12 and 5π12; k = 1 gives 13π12 and 17π12; k = 2 gives 25π12 and 29π12, both past 2π = 24π12. The same four answers, and the count matches: two per turn times two turns.

The trap

Solving for 2t only on the usual one turn, 0 ≤ 2t < 2π, and then dividing by 2. That finds only the answers with t less than π and quietly loses the rest: for sin 2t = 12 it gives t = π12 and 5π12 and misses 13π12 and 17π12. Stretch the interval before you solve, 0 ≤ 2t < 4π, and do all the adding of 2π on 2t before you divide.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Get it alone first, 2 cos 2t + 2 = 0

Solve 2 cos 2t + 2 = 0 for 0 ≤ t < 2π.

Show the steps and the answer
QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
Cosine is negative in quadrants II and III, so cos u = −22 has one answer in each on every turn.
  1. Say what it asks: every t on one turn that makes 2cos2t+2 equal to 0.The cosine is not alone yet, so the first job is to free it.
  2. Subtract 2 from both sides: 2cos2t=−2. Divide both sides by 2: cos2t=−22.This finds the one value the cosine must have, the same way 2x + 2 = 0 gives x = −22. Plug it back to see: 2 · (−22) + 2 = −2 + 2 = 0.
  3. Let u=2t, so 0≤u<4π.Two turns for the doubled angle.
  4. First turn: the reference angle is π4, because cosπ4=22. Cosine is negative in quadrants II and III, so u=π−π4=3π4 and u=π+π4=5π4.Cosine is the x coordinate, negative on the left half of the circle: quadrants II and III.
  5. Add 2π=8π4 to each: u=11π4 and u=13π4.Both are less than 4π = 16π4, so both stay; one more 2π gives 19π4 and 21π4, past the end.
  6. Divide each u by 2: t=3π8,5π8,11π8,13π8.Halving doubles the bottom. Gotcha: these are not special angles, and that is fine; only the inside angle 2t has to be one.
Answer
  • t=3π8
  • t=5π8
  • t=11π8
  • t=13π8
Double-check Second way, with the general solution: u = 3π4 + 2kπ or u = 5π4 + 2kπ, so t = 3π8 + kπ or t = 5π8 + kπ. k = 0 gives 3π8 and 5π8; k = 1 gives 3π8 + 8π8 = 11π8 and 5π8 + 8π8 = 13π8; k = 2 is past 2π. Put one back: 2 · 11π8 = 11π4, which is 3π4 plus a full turn, so 2 cos 2t + 2 = 2 · (−22) + 2 = 0.

8.5 Equations that factor like a quadratic

Open the full lesson

The rule

An equation a·sin2t+b·sint+c=0, with a≠0, is a quadratic in sin t: writing u=sint gives au2+ bu +c=0.

Its solutions are the angles t with sint=u, for each answer u of the quadratic with −1≤u≤1; an answer outside [−1,1] gives no angle. Cosine works the same way. For tangent, keep every real answer, since tangent takes every real value.

How

  1. Get 0 on one side: add or subtract on both sides until every term sits on the left and the right side is 0.
  2. Make sure only one trig function appears (all sin t, or all cos t, or all tan t), with its square in one term.
  3. Write u for that function, so sin2 t becomes u2 and sin t becomes u.
  4. Factor the quadratic in u: pull out a common factor when there is no plain number term; otherwise split the middle term and group. Multiply back to check. An equation that comes already factored, such as (sin t − 1)(sin t + 2) = 0, skips this step.
  5. Set each factor equal to 0 and solve for u (the zero-product rule). Plug each u back into the factored form to see the product is 0.
  6. Put the function back: each value of u becomes a basic equation such as sin t = −12.
  7. Throw out any value of sine or cosine below −1 or above 1: no angle has it. Keep every value of tangent.
  8. Solve each remaining basic equation on [0, 2π) with the reference angle and the quadrants. For sine or cosine, the values 1 and −1 give one angle each; the other values give two.
  9. List all the angles in order and put each one back into the original equation.

Worked example

Worked example

Two values of sine, one thrown out

Solve 2 sin2 t − 7 sin t = 4 for every t in [0, 2π). In plain words: find every angle on one turn that makes the left side equal 4.

Show the steps and the answer
2u²−8u2uu−4+1u−4
The four parts add to 2u2 − 8u + u − 4 = 2u2 − 7u − 4, so (2u + 1)(u − 4) is the right factoring.
x = cos θy = sin θ7π/6
At 7π6, in quadrant III, the point sits half a unit below the center: sin t = −12.
x = cos θy = sin θ11π/6
At 11π6, in quadrant IV, the point is again half a unit below the center: the second angle with sin t = −12.
  1. Subtract 4 from both sides: 2 sin2t−7sint−4=0.The zero-product rule, used in a moment, needs a 0 on one side. Subtracting the same number from both sides keeps them equal.
  2. Write u for sin t: 2u2−7u−4=0.sin2 t means (sin t)2, which is u2. Every t in the equation sits inside a sin t, so with this one letter the trigonometric equation becomes a plain quadratic.
  3. Find two numbers that multiply to a·c=2·(−4)=−8 and add to b=−7. They are −8 and 1.(−8)·1 = −8 and −8 + 1 = −7. These two numbers show how to split the middle term so the four pieces group in pairs.
  4. Split and group: 2u2−8u+u−4=2u(u−4)+1(u−4)=(2u+1)(u−4). So (2u+1)(u−4)=0.Both pairs contain (u − 4), so it comes out as a common factor. Multiply back to check: 2u2 − 8u + u − 4 = 2u2 − 7u − 4, the quadratic you started with.
  5. Set each factor equal to 0: 2u+1=0 gives u=−12; u−4=0 gives u=4.This finds the values of u that make the product 0 (the zero-product rule). For 2u + 1 = 0, subtract 1, then divide by 2. Plug back in: u = −12 gives (0)(−92) = 0, and u = 4 gives (9)(0) = 0.
  6. Put sine back: sint=−12 or sint=4.u was only a stand-in for sin t. These are values of sine, not angles yet.
  7. Throw out sint=4.sin t is the height of a point on the unit circle, whose radius is 1, so −1 ≤ sin t ≤ 1. Height 4 is far above the whole circle: no angle has sine 4.
  8. Solve sint=−12. The reference angle is π6, since sinπ6=12. Sine is negative in quadrants III and IV.This is a basic equation, solved by the reference angle and quadrant method: the reference angle gives the size, and the sign of sine picks the quadrants.
  9. Quadrant III: t=π+π6=7π6. Quadrant IV: t=2π−π6=11π6.In quadrant III you go half a turn, then the reference angle more; in quadrant IV you stop the reference angle short of a full turn. In sixths: 6π6 + π6 = 7π6 and 12π6 − π6 = 11π6.
Answer
  • t=7π6
  • t=11π6
Double-check Put each angle into the original equation 2 sin2 t − 7 sin t = 4. At t = 7π6, sin t = −12, so the left side is 2·14 − 7·(−12) = 12 + 72 = 82 = 4, the right side. At t = 11π6, sin t is also −12, so the same arithmetic gives 4. A second way, by picture: on the unit circle the only points at height −12 are the two at 7π6 (quadrant III) and 11π6 (quadrant IV), and no point is at height 4.

The trap

Stopping at the values of sin t. Factoring hands you numbers such as sin t = −12 and sin t = 4, not angles. Each number still needs two more steps: throw it out if it is below −1 or above 1, and otherwise turn it into every angle on one turn with that sine (one angle for 1 and −1, two for the others). Only those angles are the answers.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Move the terms first, with a 2 in front

Solve 2 sin2 t + 1 = 3 sin t for every t in [0, 2π). In plain words: find every angle on one turn that makes both sides equal.

Show the steps and the answer
π/6π/25π/6π/2π3π/22π−11
The line y = 12 crosses the graph of y = sin t twice and the line y = 1 touches it once: three answers.
  1. Subtract 3 sin t from both sides: 2 sin2t−3sint+1=0.The zero-product rule needs 0 on one side. Write the terms from the square down, the way a quadratic is written.
  2. Write u for sin t: 2u2−3u+1=0.Renaming shows the quadratic.
  3. Find two numbers that multiply to a·c=2·1=2 and add to −3: they are −2 and −1. Split the middle term: 2u2−2u−u+1.(−2)·(−1) = 2 and −2 + (−1) = −3. Splitting makes two pairs that share a factor.
  4. Group: 2u(u−1)−1(u−1)=(2u−1)(u−1).Both pairs contain (u − 1). Multiply back to check: 2u2 − 2u − u + 1 = 2u2 − 3u + 1.
  5. Set each factor equal to 0: 2u−1=0 gives u=12; u−1=0 gives u=1.This finds the values of u that make the product 0. For 2u − 1 = 0, add 1 and divide by 2. Plug back in: u = 12 gives (2·12 − 1)(12 − 1) = 0·(−12) = 0, and u = 1 gives (2 − 1)(1 − 1) = 1·0 = 0.
  6. Put sine back: sint=12 or sint=1. Both lie from −1 to 1, so both stay.Nothing to throw out this time.
  7. Solve sint=12: the reference angle is π6; sine is positive in quadrants I and II, so t=π6 and t=π−π6=5π6.Two quadrants share a positive sine. In sixths: 6π6 − π6 = 5π6.
  8. Solve sint=1: only the top of the circle, t=π2.Height 1 is a single point of the circle.
  9. List in order: π6,π2,5π6.The answer is every angle from both factors.
Answer
  • t=π6
  • t=π2
  • t=5π6
Double-check Use the original equation, before anything moved. At t = π6, sin t = 12: left 2·14 + 1 = 32, right 3·12 = 32. At t = 5π6, sin t is also 12, so the sides match again. At t = π2, sin t = 1: left 2·1 + 1 = 3, right 3·1 = 3.

8.6 Rewriting with an identity first

Open the full lesson

The rule

sin2t+cos2t=1 at every angle, so sin2t=1−cos2t and cos2t=1−sin2t: replace the squared function and keep the lonely one.

Where cost≠0,sintcost=tant, so sint=cost becomes tant=1, and a·sint=b·cost (a≠0) becomes tant=ba. First test t=π2 and t=3π2 in the original, because a division by cos t would lose them if they were solutions.

How

  1. Say what the equation asks: every solution on one turn, each t in [0, 2π) that makes the two sides equal.
  2. Rewrite with an identity until one trigonometric function of t is left; the strategy in this lesson says which identity. Write each swap inside parentheses.
  3. If you divide by cos t, first put t = π2 and t = 3π2 into the original equation and keep any that work.
  4. Get a 0 on one side. If the equation is a quadratic in the function or has a common factor, factor it, treating the function as a single unknown.
  5. Solve each piece with the reference angle and the quadrants. Throw out any value of sine or cosine outside [−1, 1].
  6. Put every answer into the original equation, not the rewritten one.

Worked example

Worked example

Swap the squared sine, then factor

Solve 2 sin2t + 5 cos t = 4 for every t in [0, 2π).

Show the steps and the answer
x = cos θy = sin θP
At π3, which is 60°, the point sits 12 to the right of center: cos t = 12.
x = cos θy = sin θP
At 5π3, which is 300°, the point is the mirror image below the x-axis, with the same cos t = 12.
  1. Say what it asks: find every angle t on one turn, from 0 up to but not including 2π, that makes 2 sin2t+5cost equal to 4.Solving a trigonometric equation on one turn means finding all such angles, not only one.
  2. Spot the two functions: sin2t is squared, and cos t stands alone.The methods you have need one function. The lonely one, cosine, is the one to keep, so the squared sine is the one to trade.
  3. Replace sin2t with (1−cos2t): 2(1−cos2t)+5cost=4.Subtracting cos2t from both sides of sin2t + cos2t = 1 gives sin2t = 1 − cos2t at every angle, so the swap changes no answer. The parentheses keep the 2 on both pieces.
  4. Multiply out: 2−2cos2t+5cost=4.The 2 multiplies both the 1 and the −cos2t.
  5. Subtract 4 from both sides: −2cos2t+5cost−2=0.The zero-product rule needs a zero on one side, and 2 − 4 = −2.
  6. Multiply both sides by −1: 2 cos2t−5cost+2=0.Every sign flips and 0 stays 0, so the solutions do not change, and a positive first term is friendlier to factor.
  7. Write u for cos t: 2u2−5u+2=0. Factor it: (2u−1)(u−2)=0.This is a quadratic in cos t, like the ones in the last lesson. Multiply back to check: 2u2 − 4u − u + 2 = 2u2 − 5u + 2.
  8. Set each factor to 0: 2u−1=0 gives u=12, and u−2=0 gives u=2.This finds the values of cos t that make a bracket zero, which makes the whole product zero. Plug back in: 2·12 − 1 = 0 and 2 − 2 = 0.
  9. So cost=12 or cost=2. Throw out cost=2.Cosine is the x coordinate of a point on a circle of radius 1, so it is never larger than 1. No angle has cos t = 2.
  10. Solve cost=12: the reference angle is π3, and cosine is positive in quadrants I and IV, so t=π3 and t=2π−π3=5π3.cos π3 = 12. In quadrant IV the angle is a full turn minus the reference angle: 6π3 − π3 = 5π3.
Answer
  • t=π3
  • t=5π3
Double-check Put each answer into the original equation. At t = π3: sin t = 32, so sin2t = 34 and 2 sin2t = 32; cos t = 12, so 5 cos t = 52; and 32 + 52 = 82 = 4. At t = 5π3: sin t = −32, whose square is again 34, and cos t = 12 again, so the total is 4 again. Both work. An angle off the list fails: at t = π, 2·0 + 5·(−1) = −5, not 4.

The trap

Dividing both sides by cos t, or by sin t, without testing where it is zero. Division by zero is not allowed, so every solution with cos t = 0, at t = π2 or t = 3π2, disappears without any warning; for sin t the angles are t = 0 and t = π. In 2 sin t cos t = cos t, a division loses π2 and 3π2. Test those angles in the original equation before dividing, and when the function sits in every term, factor it out instead of dividing.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

The swap, then a common factor

Solve 2 cos2t + sin t = 2 for every t in [0, 2π).

Show the steps and the answer
x = cos θy = sin θP
At 30° the height is 12 and cos t = 32, so 2 cos2t + sin t = 2·34 + 12 = 2.
  1. Say what it asks: find every angle on one turn that makes 2 cos2t+sint equal to 2.Every such angle is a solution on one turn, and we want them all.
  2. cos2t is squared and sin t is alone, so keep sine and replace cos2t with (1−sin2t): 2(1−sin2t)+sint=2.Subtracting sin2t from both sides of sin2t + cos2t = 1 gives cos2t = 1 − sin2t at every angle, so the answers do not change.
  3. Multiply out: 2−2sin2t+sint=2.The 2 multiplies both pieces inside the parentheses.
  4. Subtract 2 from both sides: −2sin2t+sint=0. Multiply by −1: 2 sin2t−sint=0.The zero-product rule needs a zero on one side, and multiplying by −1 keeps the same solutions.
  5. Pull out the common factor sin t: sin t (2sint−1)=0.Both terms contain sin t. Multiply back to check: sin t·2 sin t − sin t·1 = 2 sin2t − sin t.
  6. Set each factor to 0: sint=0, or 2sint−1=0, which gives sint=12.This finds the values of sine that make one factor zero. For the second, add 1 and divide by 2; plug back in: 2·12 − 1 = 0.
  7. sint=0 at t=0 and t=π.The height is 0 at the right and left ends of the circle. 2π is the same point as 0 and is not in [0, 2π).
  8. sint=12: the reference angle is π6, and sine is positive in quadrants I and II, so t=π6 and t=π−π6=5π6.sin π6 = 12, and the quadrant II angle is half a turn minus the reference angle.
Answer
  • t = 0
  • t=π6
  • t=5π6
  • t = π
Double-check At t = 0: cos t = 1, so 2·1 + 0 = 2. At t = π: cos t = −1 and cos2t = 1, so 2·1 + 0 = 2. At t = π6: cos2t = 34, so 2·34 + 12 = 32 + 12 = 2. At t = 5π6: cos t = −32, so cos2t is 34 again and the total is 2 again. All four work.

8.7 Equations a calculator finishes

Open the full lesson

The rule

To find each solution on one turn [0,2π) of sint=c,cost=c or tant=c when c is not a special value (and −1≤c≤1 for sine and cosine): in radian mode, the inverse key gives α= arcsin c, arccos c or arctan c.

The second solution is π−α for sine, 2π−α for cosine and α+π for tangent. Add 2π to any negative answer. Round only at the end, usually to four decimal places, and write ≈.

How

  1. Get the trig function alone: sin t = c, cos t = c or tan t = c.
  2. Look at c. A special value is solved exactly, with no calculator. For sine or cosine, a c above 1 or below −1 means no solution: stop.
  3. Put the calculator in radian mode.
  4. Press the inverse key (sin−1, cos−1 or tan−1) on c. Call the result α and keep every digit.
  5. Find the second solution: π − α for sine, 2π − α for cosine, α + π for tangent.
  6. If an answer is negative, add 2π to it so it lands in [0, 2π).
  7. Round each answer to four decimal places, write ≈, and put each one back into the equation to check.

Worked example

Worked example

Solving sin t = 0.4 with the inverse key

Solve sin t = 0.4 for 0 ≤ t < 2π, rounded to four decimal places. In plain words: the sine of the angle, the height of its point on the unit circle, is 0.4; find every angle in one turn with that height.

Show the steps and the answer

sin−1 0.4 ≈ 0.411516846 (Quadrant I)

π − 0.411516846 ≈ 2.730075808 (Quadrant II)

Round last: t ≈ 0.4115 and t ≈ 2.7301

Check: 0.4115 + 2.7301 = 3.1416 ≈ π

  1. Look at 0.4. The special sines are 0, 12,22≈0.7071,32≈0.8660, 1 and their negatives. 0.4 is none of them, and it lies between −1 and 1.A special value would be solved exactly, and a value outside [−1, 1] would have no solution. Neither happens, so answers exist and the calculator is needed.
  2. Sine is positive here, so expect two answers: one in Quadrant I and one in Quadrant II.All Students Take Calculus: sine is positive in Quadrants I and II only.
  3. In radian mode, press sin−1 0.4. The screen shows 0.411516846 (some calculators show more digits). Call it α and keep every digit.The inverse key returns the one angle from −π2 to π2 whose sine is 0.4. It is between 0 and 1.5708, so it is the Quadrant I answer.
  4. Second solution: π−α≈3.141592654−0.411516846=2.730075808.Mirroring the point across the vertical axis keeps its height at 0.4 and gives the angle π − α. The result is between 1.5708 and 3.1416, so it is in Quadrant II, as expected.
  5. Round both to four decimal places: 0.411516846 becomes 0.4115, and 2.730075808 becomes 2.7301.Rounding once, at the end, keeps the error in the last digit. The fifth digits after the point are 1 and 7, so the first stays and the second rounds up.
Answer
  • t ≈ 0.4115
  • t ≈ 2.7301
  • (both rounded to four decimal places)
Double-check Put each answer back: sin(0.4115) ≈ 0.39998 and sin(2.7301) ≈ 0.39998, both 0.4000 to four decimal places. Second way: the two points are mirror images across the vertical axis, so the first answer is as far past 0 as the second is short of π. The two must add to π, and 0.4115 + 2.7301 = 3.1416 ≈ π.

The trap

Stopping at the calculator's answer. The inverse key shows one angle, but sin t = 0.4 has two on one turn. After every key press, ask which other quadrant shares the sign, and find the second angle with π − α, 2π − α or α + π.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

A negative sine, sin t = −0.25

Solve sin t = −0.25 for 0 ≤ t < 2π, to four decimal places. In plain words: the height of the angle's point is −0.25, a little below the center; find every angle in one turn at that height.

Show the steps and the answer
-14.48°345.52°same terminal side
The calculator's clockwise angle and the angle one full turn later end on the same side.
  1. −0.25 is between −1 and 1 and is not a special sine. Sine is negative, so expect answers in Quadrants III and IV.Sine is positive only in Quadrants I and II, so a negative sine lives in III and IV.
  2. Radian mode: sin−1(−0.25)≈−0.252680255. Call it α and keep every digit.arcsin returns an angle from −π2 to π2; a negative height gives a negative angle, a small clockwise turn into Quadrant IV.
  3. α is not in [0,2π), so add a full turn: α+2π≈−0.252680255+6.283185307=6.030505052.Adding 2π lands on the same point of the circle, now inside one counterclockwise turn. This is the Quadrant IV answer.
  4. Second solution: π−α≈3.141592654−(−0.252680255)=3.394272909.Sine's mirror is π − α even when α is negative. Subtracting a negative adds, and the result is between 3.1416 and 4.7124, in Quadrant III.
  5. Round and list from smallest to largest: 3.3943 and 6.0305.Four decimal places, once, at the end.
Answer
  • t ≈ 3.3943
  • t ≈ 6.0305
Double-check Second way, with the reference angle arcsin 0.25 ≈ 0.2527: Quadrant III gives π + 0.2527 ≈ 3.3943 and Quadrant IV gives 2π − 0.2527 ≈ 6.0305, the same two answers. Put back: sin(3.3943) ≈ −0.2500 and sin(6.0305) ≈ −0.2500.

8.8 Checking for extra solutions after squaring

Open the full lesson

The rule

If a=b, then a2=b2, but a2=b2 only tells you that a=b or a=−b.

So squaring both sides never loses a solution and can add extraneous solutions: keep a candidate only if it makes the original equation true.

How

  1. Write the original equation where you will see it at the end. It is the judge.
  2. Square both sides, the whole of each side at once, keeping the middle term: (a + b)2 = a2 + 2ab + b2.
  3. Use sin2 t + cos2 t = 1, get 0 alone on one side, factor, and set each factor equal to 0.
  4. Solve each small equation on one turn, [0, 2π). Every answer you get is a candidate.
  5. Put each candidate into the original equation, not the squared one. Keep it only if the two sides match, sign included.
  6. Each kept solution on one turn, a, gives the general solution t = a + 2kπ, k any integer.

Worked example

Worked example

Squaring a difference, then checking

Solve cos t − sin t = 1 on one turn, [0, 2π), then write the general solution. In plain words: find every angle where the cosine minus the sine comes out to exactly 1, then describe all such angles on every turn.

Show the steps and the answer
input toutput cos t − sin t01π/2−1π−13π/21↑ solve: output given, read every input above it
The two 1s in the output row point up to 0 and 3π2, the kept answers.
  1. Keep the original equation in view: cost−sint=1.It is the judge at the end. Every candidate goes back into this line, not into a later one.
  2. Square both sides: (cost−sint)2=12=1.Two different functions sit on the left, and none of the earlier methods joins them. Squaring will make cos2 t + sin2 t appear, which the identity turns into 1. Doing the same thing to both sides keeps them equal.
  3. Expand the left side: cos2t−2costsint+sin2t=1.(a − b)2 = a2 − 2ab + b2 with a = cos t and b = sin t. The middle term −2 cos t sin t must stay.
  4. Replace cos2t+sin2 t with 1: 1−2costsint=1.sin2 t + cos2 t = 1 for every angle, so the two squares together are worth 1.
  5. Subtract 1 from both sides, then divide both sides by −2: costsint=0.This puts 0 alone on one side, which the zero-product rule needs. Subtracting 1 leaves −2 cos t sin t = 0, and 0 ÷ (−2) = 0.
  6. Use the zero-product rule: cost=0 or sint=0.A product is 0 only when one of its factors is 0, so this step finds every angle that could make the product 0.
  7. Solve each on one turn. cost=0 at t=π2 and t=3π2; sint=0 at t=0 and t=π. The candidates are 0, π2,π and 3π2.cos t is the x-coordinate on the unit circle, 0 at the top (0, 1) and the bottom (0, −1); sin t is the y-coordinate, 0 at (1, 0) and (−1, 0). Plug one back in: at t = π2, cos t · sin t = 0 · 1 = 0.
  8. Check t=0 in the original: cos0−sin0=1−0=1. Keep it.The left side matches the right side, 1. In the table picture, this is the first 1 in the output row.
  9. Check t=π2: cosπ2−sinπ2=0−1=−1, not 1. Throw it out.The left side is −1. It passed the squared equation only because (−1)2 = 1, so it is an extraneous solution.
  10. Check t=π: cosπ−sinπ=−1−0=−1, not 1. Throw it out.Again the left side is −1, the sign that squaring hid.
  11. Check t=3π2: cos3π2−sin3π2=0−(−1)=1. Keep it.Subtracting −1 is the same as adding 1, so the left side is 1 and matches.
  12. Write the general solution: t=2kπ or t=3π2+2kπ, k any integer.The period of cosine and sine is 2π, so each kept answer comes back every full turn; 0 + 2kπ is written 2kπ.
Answer
  • On one turn: t = 0 and t = 3π2
  • General solution: t = 2kπ or t = 3π2 + 2kπ, k any integer
  • Extraneous: π2 and π
Double-check Second way: move sin t across first, cos t = 1 + sin t, and square: cos2 t = 1 + 2 sin t + sin2 t. Replace cos2 t with 1 − sin2 t and subtract 1 − sin2 t from both sides: 0 = 2 sin2 t + 2 sin t = 2 sin t (sin t + 1). So sin t = 0 (t = 0 or π) or sin t = −1 (t = 3π2), only three candidates this time. In cos t − sin t = 1: at 0, 1 − 0 = 1; at π, −1 − 0 = −1, out; at 3π2, 0 − (−1) = 1. The same two answers survive: 0 and 3π2.

The trap

Writing the candidates as the answer. After squaring sin t + cos t = 1, the list 0, π2, π, 3π2 looks finished, but at t = π the left side is sin π + cos π = 0 + (−1) = −1, not 1, and 3π2 fails the same way. Put every candidate back into the original equation, never the squared one, before you write the answer.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

Move a term first, then square

Solve sin t − cos t = 1 on one turn by first moving cos t to the right side. In plain words: find the angles where the sine minus the cosine is exactly 1.

Show the steps and the answer
input toutput sin t − cos tπ/21π13π/2−1↑ solve: output given, read every input above it
The two 1s in the output row point up to π2 and π, the kept answers; the −1 under 3π2 is the fake.
  1. Add cos t to both sides: sint=1+cost.With one function alone on the left, its square is the single term sin2 t, which the identity can replace.
  2. Square both sides: sin2t=1+2cost+cos2 t.(1 + cos t)2 = 12 + 2 · 1 · cos t + cos2 t, and squaring both sides keeps them equal.
  3. Replace sin2 t with 1−cos2 t: 1−cos2t=1+2cost+cos2 t.From sin2 t + cos2 t = 1. Now cos t is the only function left.
  4. Subtract 1−cos2 t from both sides: 0=2cos2t+2cost.This gets 0 alone on one side: 1 − 1 = 0, and cos2 t − (−cos2 t) = 2 cos2 t.
  5. Factor and use the zero-product rule: 0=2cost (cost+1), so cost=0 or cost=−1.2 cos t divides both terms. Plug one back in to see it work: with cos t = −1, 2(−1)(−1 + 1) = 2(−1)(0) = 0.
  6. List the candidates: cost=0 at π2 and 3π2; cost=−1 at π.On the unit circle x = 0 at the top and the bottom, and x = −1 at the far left. This route gives only three candidates.
  7. Check in sint−cost=1. At π2: 1−0=1, keep. At π: 0−(−1)=1, keep. At 3π2: −1−0=−1, throw out.Subtracting −1 adds 1. At 3π2 the moved equation sin t = 1 + cos t reads −1 = 1: equal size, opposite sign, which squaring cannot see. In the table picture, the −1 under 3π2 is the fake.
Answer
  • On one turn: t = π2 and t = π
  • General solution: t = π2 + 2kπ or t = π + 2kπ, k any integer
  • Extraneous: 3π2
Double-check Second way: square without moving anything. (sin t − cos t)2 = 1 becomes sin2 t − 2 sin t cos t + cos2 t = 1, so 1 − 2 sin t cos t = 1 and sin t cos t = 0. The candidates are now 0, π2, π and 3π2. In sin t − cos t = 1: at 0, 0 − 1 = −1; at π2, 1 − 0 = 1; at π, 0 − (−1) = 1; at 3π2, −1 − 0 = −1. The survivors are again π2 and π, though the candidate list was different.

9 Trigonometric identities

7 lessonsOpen the unit's crash course

9.1 What an identity is and how it differs from an equation

Open the full lesson

The rule

An identity is an equation whose two sides are equal at every angle t where both sides are defined.

One angle where both sides are defined and come out different, called a counterexample, proves a claim is not an identity; no number of angles where the sides agree proves that it is.

How

  1. Say in plain words what the claim promises: the left side equals the right side at every angle where both are defined.
  2. Find the angles to leave out: any angle where a side has no value. In this unit that happens where the bottom of a fraction is 0, or where a square root would hold a negative number. Those angles count neither for nor against the claim. Every other angle is allowed.
  3. Pick an allowed test angle whose sine and cosine you know exactly, preferably 30° or 60°, where neither is 0 and the two are different.
  4. Work out the left side and the right side separately, with exact values.
  5. If the two numbers differ, stop: the claim is not an identity, and your angle is a counterexample, an example that breaks the claim.
  6. If they agree, you have no verdict yet. Test another angle, or find a reason that works for every allowed angle at once; only such a reason shows the claim is an identity.

Worked example

Worked example

Is sin t + cos t = 1 an identity?

Decide whether sin t + cos t = 1 is an identity. If it is not, give an angle that shows it.

Show the steps and the answer
x = cos θy = sin θP
At 30° the point is (32, 12): its two legs add up to 1+32, which is more than the radius 1.
x = cos θy = sin θP
At 45° both legs are 22: going along both legs is longer than going straight along the radius of length 1.
  1. Say what the question asks: does the sine of an angle plus its cosine come to 1 at every angle, or only at some angles?An identity has to hold at every angle where both sides are defined, so one angle where the sides differ settles the question.
  2. Look for angles to leave out. Neither side has a fraction, so no angle is left out.Here only a bottom equal to 0 could make a side undefined. Every angle lands on a point of the unit circle, so sin t and cos t always have values.
  3. Test t=0°. Left side: sin0°+cos0°=0+1=1. Right side: 1. They agree.The point at 0° on the unit circle is (1, 0), so cos 0° = 1 and sin 0° = 0.
  4. Test t=90°. Left side: sin90°+cos90°=1+0=1. Right side: 1. They agree again.The point at 90° is (0, 1), so cos 90° = 0 and sin 90° = 1. Two agreements still prove nothing: infinitely many angles are unchecked, and at both of these angles one of the two numbers being added was 0.
  5. Test t=30°, where neither sine nor cosine is 0. Left side: sin30°+cos30°=12+32=1+32.sin 30° = 12 and cos 30° = 32. The two fractions have the same bottom, 2, so add the tops and keep the 2.
  6. Compare with the right side, 1. The fraction 1+32 equals 1 only if its top equals its bottom: 1+3=2, that is, 3=1. But 3 is the number that times itself gives 3, and 1·1=1, so 3 is not 1. The sides differ. In decimals, 1+32≈1.366, rounded.A fraction equals 1 exactly when its top and bottom are the same number. Both sides are defined at 30° and give different numbers, so 30° is a counterexample.
  7. Conclude: sint+cost=1 is not an identity. It is an equation that is true at some angles, such as 0° and 90°, and false at others, such as 30°.One angle where both sides are defined and differ breaks a promise about every angle, however many angles agreed before it.
Answer
  • Not an identity.
  • Counterexample: at t = 30°, the left side is 1+32 ≈ 1.366 and the right side is 1.
  • It holds at some angles, such as 0° and 90°, so it is an equation, not an identity.
Double-check A second way, with a picture: at 45° the point on the unit circle has legs x = cos 45° and y = sin 45°, and the radius to it has length 1. Walking along both legs is a longer trip than walking straight along the radius, because a straight line is the shortest path, so sin 45° + cos 45° is more than 1. Exactly: 22 + 22 = 222 = 2 ≈ 1.414 (rounded), not 1. A second angle breaks the claim too, so the verdict stands.

The trap

Testing one angle, seeing the two sides agree, and calling the claim an identity. Agreement proves nothing: sin t + cos t = 1 agrees at 0° and at 90° and is still false, since at 30° the left side is 1+32 ≈ 1.366, not 1. Use test angles only to disprove; to prove, give a reason that covers every allowed angle.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

One test angle breaks a claim

Is sin(2t) = 2 sin t an identity?

Show the steps and the answer
π/2π3π/22π−2−112
y = sin(2t) (solid) and y = 2 sin t (dashed) meet only at t = 0, π and 2π (0°, 180° and 360°), so a test at…
  1. Say what the question asks: is the sine of a doubled angle always twice the sine of the angle?If one angle gives different values on the two sides, the answer is no.
  2. Look for angles to leave out: there are no fractions, so none.Sine has a value at every angle, since every angle lands on a point of the unit circle.
  3. Test t=0°. Left: sin(2·0°)=sin0°=0. Right: 2sin0°=2·0=0. They agree.This settles nothing: one agreement never proves a promise about every angle.
  4. Test t=30°. Left: sin(2·30°)=sin60°=32. Right: 2sin30°=2·12=1.On the left, double the angle first, inside the parentheses, then take the sine. On the right, take the sine first, then double. Gotcha: sin is not a number multiplying 2t, so the 2 cannot be moved out front.
  5. Compare: 32≈0.866 (rounded) and 1 are different numbers.Both sides are defined at 30° and differ, so 30° is a counterexample.
Answer
  • Not an identity.
  • Counterexample: at t = 30°, the left side is 32 and the right side is 1.
Double-check A second way: test t = 90°. Left: sin(2 · 90°) = sin 180° = 0. Right: 2 sin 90° = 2 · 1 = 2. You can see the clash without working out the left side: a sine is the height of a point on a circle of radius 1, so it is never more than 1, yet the right side reaches 2 here.

9.2 The reciprocal and quotient identities

Open the full lesson

The rule

Reciprocal identities: csct=1sint,sect=1cost,cott=1tant; flipped back, sint=1csct,cost=1sect,tant=1cott.

Quotient identities: tant=sintcost and cott=costsint.Each holds at every angle where both sides are defined. tan t and sec t are undefined (have no value) where cost=0: t=π2+kπ, which is 90°+k·180°. csc t and cot t are undefined where sint=0: t=kπ, which is k·180°. Here k is any integer: …, −2,−1, 0, 1, 2, …

How

  1. Say what the question asks: which angle goes in, and which function's value must come out.
  2. Pick the identity: a flip of sine, cosine or tangent is a reciprocal identity; sine and cosine divided one by the other is a quotient identity.
  3. Write the function as a fraction in sin t and cos t: csc t = 1sint, sec t = 1cost, tan t = sintcost, cot t = costsint.
  4. Look at the bottom. If it is 0 at your angle, the function is undefined there, and you are done.
  5. Otherwise put in the numbers from the point (cos t, sin t) and divide: multiply by the flip, cancel, and rationalize any square root left in the bottom.
  6. Check: multiply the answer by its partner at the same angle (sin with csc, cos with sec, tan with cot). The product must be 1. An answer of 0 is the one exception: its partner is undefined there, so check instead that the top of your fraction is 0 and the bottom is not.

Worked example

Worked example

All four values at 150°

The point on the unit circle at 150° is (−32, 12). Find tan 150°, csc 150°, sec 150° and cot 150° exactly.

Show the steps and the answer
x = cos θy = sin θP
At 150° the point sits up and to the left.
  1. Say what it asks: the input is the angle 150°, and four outputs are wanted, the values of tan, csc, sec and cot there.Naming the input and the outputs first tells you which identities to reach for.
  2. Read the point: cos150°=−32 and sin150°=12. Neither is 0.The point at angle t is (cos t, sin t). With no 0 in either possible bottom, all four values exist.
  3. tan150°=sin150°cos150°=12÷(−32)=12×(−23)=−223=−13.Quotient identity: tangent is sine over cosine. Dividing by a fraction is multiplying by its flip; a positive times a negative is negative; then the 2s cancel.
  4. −13=−1·33·3=−33, so tan150°=−33.Rationalize: multiplying top and bottom by 3 keeps the value and clears the root from the bottom, since 3 · 3 = 3.
  5. csc150°=1sin150°=1÷12=1×2=2.Reciprocal identity: cosecant is the flip of sine, and the flip of 12 is 2.
  6. sec150°=1cos150°=1÷(−32)=−23=−233.Reciprocal identity: secant is the flip of cosine. The flip of −32 is −23, and multiplying top and bottom by 3 rationalizes it.
  7. cot150°=cos150°sin150°=(−32)÷12=(−32)×2=−3.Quotient identity: cotangent is cosine over sine. Multiply by the flip of 12, which is 2, and the 2s cancel.
Answer
  • tan150°=−33
  • csc 150° = 2
  • sec 150° = −233
  • cot 150° = −3
Double-check Each value times its partner must be 1. sin 150° · csc 150° = 12 · 2 = 1. cos 150° · sec 150° = (−32) · (−23) = 2323 = 1. tan 150° · cot 150° = (−33) · (−3) = 33 = 1. All three products are 1.

The trap

Matching by first letter. Secant starts with s like sine, so it is tempting to write sec t = 1sint. It is the other way round: secant is the flip of cosine, and cosecant is the flip of sine. Use the memory device each pair has one co (sine with cosecant, cosine with secant, tangent with cotangent), then test with a number: sec 0° must be 1cos0° = 1, while 1sin0° = 10 has no value.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

All four from a point

The point (35, 45) lies on the unit circle at some angle t. Find csc t, sec t, tan t and cot t.

Show the steps and the answer
x = cos θy = sin θP
The point (35, 45) sits at an angle of about 53.13° (rounded).
  1. Say what it asks: the point is given; find four outputs at its angle.The angle itself is never needed, only its cosine and sine, and the point gives both.
  2. Check the point: (35)2+(45)2=925+1625=2525=1.Every point on the unit circle has x2 + y2 = 1, so this confirms the point really lies on it.
  3. cost=35 and sint=45. Neither is 0.The point is (cos t, sin t), and bottoms that are not 0 mean all four values exist.
  4. csct=1÷45=54 and sect=1÷35=53.Reciprocal identities: cosecant flips sine and secant flips cosine; dividing 1 by a fraction gives its flip.
  5. tant=45÷35=45×53=2015=43.Quotient identity, sine over cosine: multiply by the flip, then divide top and bottom by 5.
  6. cott=35÷45=35×54=1520=34.Quotient identity, cosine over sine: the same steps the other way up, then divide top and bottom by 5.
Answer
  • csc t = 54
  • sec t = 53
  • tant=43
  • cot t = 34
Double-check tan t · cot t = 43 · 34 = 1212 = 1. The other route agrees: cot t = 1tant = 1 ÷ 43 = 34.

9.3 The Pythagorean identities from the unit circle

Open the full lesson

The rule

sin2t+cos2t=1 for every angle t.

1+tan2t=sec2t for every angle t with cost≠0.1+cot2t=csc2t for every angle t with sint≠0.

How

  1. Write the parent identity: sin2t + cos2t = 1.
  2. Choose what to divide by: cos2t to reach tangent and secant, sin2t to reach cotangent and cosecant.
  3. Set cos t (or sin t) equal to 0 to find the angles to throw out: cos t = 0 at 90° and 270°, sin t = 0 at 0° and 180°, and at every angle ending at those same points.
  4. Divide every term on both sides by the chosen amount, the 1 included.
  5. Split the left side into one fraction per term.
  6. Rename each fraction: a term over itself is 1, and each of the others is a quotient identity or a reciprocal identity, squared.
  7. Test the result at one angle where it should hold, such as 30° or 60°.

Worked example

Worked example

Divide by cos2t: the tangent and secant identity

Start from sin2t + cos2t = 1. Divide by cos2t to get an identity that uses tangent and secant, and say for which angles it holds.

Show the steps and the answer

sin2t+cos2t=1

÷ cos2t, every term, the 1 too

sin2tcos2t+cos2tcos2t=1cos2t

tan2t + 1 = sec2t

not where cos t = 0: 90°, 270°, ...

x = cos θy = sin θP
At 90° the point is (0, 1), so cos 90° = 0 and dividing by cos2t is impossible there.
  1. Say what it asks: turn the sine and cosine identity into one written with tangent, secant and numbers only, and list the angles the new identity must leave out.Tangent and secant both have cos t on the bottom, which is why dividing by cos2t is the move that reaches them.
  2. Write the starting identity: sin2t+cos2t=1.It holds for every angle, from the point (cos t, sin t) on the unit circle.
  3. Find the angles to leave out by setting cost=0. On the unit circle x=0 only at the top point (0, 1) and the bottom point (0,−1), that is at t=90° and t=270°, and at every angle that ends at those points (90° plus any multiple of 180°). Plug one in: cos90°=0, so cos290°=0.We are about to divide by cos2t, and dividing by 0 has no answer. This step finds the angles where the division is impossible, so we can throw them out first.
  4. For every other angle, divide both sides by cos2t: sin2t+cos2tcos2t=1cos2t.Dividing both sides of a true equation by the same nonzero amount keeps it true. The 1 on the right gets divided too.
  5. Split the left side: sin2tcos2t+cos2tcos2t=1cos2t.A fraction whose top is a sum splits into one fraction per term over the same bottom: adding fractions with a common denominator, run backwards.
  6. Rename the first fraction: sin2tcos2t=(sintcost)2=tan2t.Squaring a fraction squares its top and its bottom, and tan t = sintcost is the quotient identity.
  7. Rename the second fraction: cos2tcos2t=1.Any amount other than 0 divided by itself is 1, and step 3 made sure cos2t is not 0.
  8. Rename the right side: 1cos2t=(1cost)2=sec2t.12 = 1, so 1cos2t is the square of 1cost, and sec t = 1cost is the reciprocal identity.
  9. Put the pieces together: tan2t+1=sec2t, usually written 1+tan2t=sec2t.Adding in either order gives the same sum.
Answer
  • 1 + tan2t = sec2t
  • It holds for every angle t with cos t ≠ 0: every angle except 90°, 270° and the other angles that end at the top or bottom of the circle (90° plus any multiple of 180°, or π2 plus any multiple of π in radians).
Double-check Test two angles where it should hold. At t = 60°: tan 60° = 3, so 1 + tan260° = 1 + 3 = 4; cos 60° = 12, so sec 60° = 1 ÷ 12 = 2 and sec260° = 4. At t = 135°: tan 135° = 22 ÷ (−22) = −1, so the left side is 1 + 1 = 2; cos2135° = (−22)2 = 12, so sec2135° = 1 ÷ 12 = 2. Both sides agree each time. Test angles can never prove an identity, but a slip in the steps would almost always show up here; the proof is the chain of steps above.

The trap

Keeping only the positive square root. A Pythagorean identity gives the size of the missing value, not its sign. With sin t = 35 and t in quadrant II, cos2t = 1 − 925 = 1625, so cos t is 45 or −45; in quadrant II the point sits left of the y-axis, so cos t = −45. After every square root, write both signs and let the quadrant choose.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

A root that does not come out whole

cos t = −23 and t is in quadrant III. Find sin t.

Show the steps and the answer
QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
In quadrant III sine and cosine are both negative; only tangent and its reciprocal, cotangent, are positive.
  1. Say what it asks: you know the cosine; find the sine of the same angle, with the sign quadrant III allows.Sine and cosine sit together in sin2t + cos2t = 1.
  2. Put in the known value: sin2t+(−23)2=1, so sin2t+49=1.Square the whole value, sign included: (−2)2 = 4 and 32 = 9, and the minus sign is gone.
  3. Get sin2t alone: sin2t=99−49=59.Subtract 49 from both sides, writing 1 as 99 to share the bottom.
  4. Take the square root: sint=53 or sint=−53. Plug back: (53)2=59.The root of a fraction is the root of the top over the root of the bottom, and the root of 9 is 3. No whole number squares to 5, so 5 stays as it is.
  5. Choose the sign: in quadrant III the point is below the x-axis, so its y reading, sin t, is negative. sint=−53.In quadrant III only tangent (with its reciprocal) is positive.
Answer
sint=−53
Double-check Put both values back: (−53)2 + (−23)2 = 59 + 49 = 99 = 1. With rounded decimals: sin t ≈ −0.745 and cos t ≈ −0.667, and 0.7452 + 0.6672 ≈ 0.555 + 0.445 = 1.000.

9.4 Even and odd: what a negative angle does

Open the full lesson

The rule

cos(−t)=cost and sin(−t)=−sint for every angle t, and so tan(−t)=−tant wherever cost≠0.

These are identities. A function f is an even function when f(−t)=f(t), and an odd function when f(−t)=−f(t), for every t where f has a value: cosine is even; sine and tangent are odd.

How

  1. Look at the angle: a minus sign in front of it means the same size of turn in the other direction.
  2. Name the function in front of the angle.
  3. Cosine or secant: drop the minus, because they are even. cos(−t) becomes cos t.
  4. Sine, cosecant, tangent or cotangent: move the minus out in front of the function, because they are odd. sin(−t) becomes −sin t.
  5. If the function is squared or cubed, rewrite inside the parentheses first and apply the power after.
  6. Finish the work at the positive angle, then combine the signs: a minus times a minus is a plus.
  7. Check: add 360° to the negative angle (as many times as needed) and read the point at the new angle.

Worked example

Worked example

Cosine, sine and tangent at −60°

Find the exact values of cos(−60°), sin(−60°) and tan(−60°).

Show the steps and the answer
x = cos θy = sin θP
P, the point for 60°, sits above the x-axis at (12, 32).
x = cos θy = sin θQ
Q, the point for −60° (the same spot as 300°), sits straight below P at (12, −32).
  1. Say what it asks: the input is −60°, a turn of 60° clockwise. Find three outputs there as exact numbers (fractions and roots, no decimals): the cosine (the x of the point), the sine (the y) and the tangent.Naming the input and the outputs first keeps you answering the question that was asked.
  2. cos(−60°)=cos60°=12.Cosine is an even function: the mirror across the x-axis keeps the x. The special-angle value is cos 60° = 12.
  3. sin(−60°)=−sin60°=−32.Sine is an odd function: the mirror flips the sign of the y. The special-angle value is sin 60° = 32.
  4. tan(−60°)=sin(−60°)cos(−60°)=(−32)÷12=−32·2=−3.The quotient identity says tangent is sine over cosine. Dividing by 12 is multiplying by 2, and one minus sign makes the result negative.
  5. Compare with the odd rule for tangent: −tan60°=−3, the same value.tan 60° = 3, and tangent is odd, so tan(−60°) must be −3. Two routes agreeing is a good sign.
Answer
  • cos(−60°)=12
  • sin(−60°)=−32
  • tan(−60°)=−3
Double-check A second way, without the even and odd rules: −60° + 360° = 300°, so −60° ends where 300° ends, in Quadrant IV, 60° below the positive x-axis, at (12, −32). Its x, 12, is cos(−60°). Its y, −32, is sin(−60°). And y ÷ x = −32 · 2 = −3 is tan(−60°). All three match.

The trap

The most common slip is pulling the minus out of cosine: writing cos(−t) = −cos t. Only the odd functions (sine, cosecant, tangent, cotangent) carry the minus out in front. Cosine and secant are even and drop it, because the mirror across the x-axis never moves the x. Say cos keeps, sin flips before you write the next line.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Values given, angle unknown

An angle t has sin t = 1237 and cos t = 3537. Find sin(−t), cos(−t), tan(−t) and csc(−t).

Show the steps and the answer
  1. Say what it asks: you do not know t itself, only its sine and cosine. Find four outputs at the input −t.The even and odd rules need only the values at t, not the angle.
  2. sin(−t)=−sint=−1237.Sine is an odd function.
  3. cos(−t)=cost=3537.Cosine is an even function.
  4. tan(−t)=sin(−t)cos(−t)=(−1237)÷3537=−1237·3735=−1235.The quotient identity, then dividing by 3537 is multiplying by its flip, 3735; the 37 on top and the 37 on the bottom cancel.
  5. csc(−t)=1sin(−t)=1÷(−1237)=−3712.The reciprocal identity; 1 divided by a fraction is its flip, and the sign stays.
Answer
  • sin(−t)=−1237
  • cos(−t)=3537
  • tan(−t)=−1235
  • csc(−t) = −3712
Double-check Another route: work at t first, then use the odd rules. tan t = 1237 ÷ 3537 = 1235, so tan(−t) = −1235. csc t = 1 ÷ 1237 = 3712, so csc(−t) = −3712. Both match. Also, (3537, −1237) is on the unit circle, since 12251369 + 1441369 = 13691369 = 1, as the point for −t must be.

9.5 Simplifying an expression step by step

Open the full lesson

The rule

Simplify by replacing an expression, one step at a time, with a shorter one that has the same value.

Each step is a named identity (reciprocal identity, quotient identity, Pythagorean identity, or the even function and odd function rules for a negative angle) or an algebra move that keeps the value (common bottom, multiply across, flip and multiply, factor, cancel a shared factor). The result equals the original at every angle where the original is defined.

How

  1. Say what the question asks: a shorter expression with the same value wherever the original is defined.
  2. Rewrite every tan, cot, sec and csc in sine and cosine, and write quotient identity or reciprocal identity beside the line.
  3. If an angle is negative, swap cos(−t) for cos t (cosine is an even function) and sin(−t) for −sin t (sine is an odd function).
  4. Tidy the fractions: multiply straight across, flip and multiply to divide, and put added fractions over one bottom before adding the tops.
  5. Look for a Pythagorean pattern, such as sin2t + cos2t, 1 − sin2t or 1 + tan2t, swap it for its partner, and name the Pythagorean identity.
  6. Factor the top and the bottom, then cancel every factor they share.
  7. If a quotient or reciprocal is left, such as sintcost or 1sint, you may rename it tan t or csc t.
  8. Check: work out the start and your answer at one angle, such as 30° or 60°. They must give the same number.

Worked example

Worked example

All four moves in one problem

Simplify 2csct−2sintcott, naming the identity used at each step.

Show the steps and the answer
30°60°√31245°45°11√2
The two special right triangles supply the check values, such as sin 30° = 12 and cos 30° = 32.
  1. Say what is asked: find the shortest expression with the same value as 2csct−2sintcott at every angle where it is defined.Knowing the goal tells you when to stop: when nothing more can be rewritten, combined, swapped or canceled.
  2. Rewrite csc t and cot t in sine and cosine, reading the big fraction bar as divided by: (2sint−2sint)÷costsint.Reciprocal identity: csc t = 1sint, so 2 csc t = 2sint. Quotient identity: cot t = costsint. A fraction bar means divide.
  3. Give 2 sin t the bottom sin t: 2sint=2sin2tsint.Fractions are subtracted over one bottom. Multiplying top and bottom by sin t multiplies by sintsint = 1, and sin t · sin t = sin2t.
  4. Subtract the tops: 2sint−2sin2tsint=2−2sin2tsint.With one bottom, the tops combine and the bottom stays.
  5. Factor 2 out of the top: 2(1−sin2t)sint.Both terms on top, 2 and 2 sin2t, share the factor 2, and pulling it out shows the pattern 1 − sin2t.
  6. Swap 1−sin2t for cos2t: 2cos2tsint.Pythagorean identity: sin2t + cos2t = 1; subtracting sin2t from both sides gives 1 − sin2t = cos2t.
  7. Divide by costsint by flipping it and multiplying: 2cos2tsint·sintcost=2cos2t·sintsint·cost.Dividing by a fraction is multiplying by its flip; then multiply tops together and bottoms together.
  8. Cancel sin t and one cos t: 2·cost·cost·sintsint·cost=2cost.cos2t is cos t · cos t. The factors sin t and cos t each multiply the whole top and the whole bottom, so each pair divides to 1.
  9. Say where the answer holds: wherever sint≠0 and cost≠0.The original needs sin t ≠ 0 for csc t and cot t, and it needs cot t ≠ 0, that is cos t ≠ 0, because cot t is its bottom. At all those angles every swap kept the value.
Answer
2 cos t, wherever sin t ≠ 0 and cos t ≠ 0
Double-check At t = 30°: sin 30° = 12 and cos 30° = 32, so csc 30° = 1 ÷ 12 = 2 and cot 30° = 32 ÷ 12 = 3. The start's top is 2 · 2 − 2 · 12 = 4 − 1 = 3, and 3 ÷ 3 = 3, because 3 · 3 = 3. The answer: 2 cos 30° = 2 · 32 = 3. Both give 3. One angle cannot prove the two always agree, but a mismatch would have exposed a mistake.

The trap

Canceling a term instead of a factor. You may cross out only a piece that multiplies the entire top and the entire bottom. In cost+sintcost the cos t on top is added to sin t, so it does not cancel; the fraction splits into costcost + sintcost = 1 + tan t. When the piece is in every term on top, factor first and then cancel: cost+sint·costcost = cost(1+sint)cost = 1 + sin t.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Rewrite, combine, swap

Simplify 3 cot t · cos t + 3 sin t, that is, find a shorter expression with the same value wherever cot t is defined.

Show the steps and the answer
  1. Rewrite cot t as costsint and multiply: 3·costsint·cost=3cos2tsint.Quotient identity: cot t = costsint. Multiplying the fraction by 3 and by cos t multiplies its top, and cos t · cos t = cos2t.
  2. Give 3 sin t the bottom sin t: 3sint=3sin2tsint.Fractions are added over one bottom; multiplying top and bottom by sin t multiplies by 1.
  3. Add the tops: 3cos2t+3sin2tsint.With one bottom, the tops add and the bottom stays.
  4. Factor 3 out of the top: 3(cos2t+sin2t)sint.Both terms on top share the factor 3.
  5. Swap cos2t+sin2t for 1: 3sint.Pythagorean identity: sin2t + cos2t = 1, and the order of adding does not matter.
  6. Rename: 3sint=3·1sint=3csct.Reciprocal identity read backwards: 1sint = csc t.
Answer
3 csc t, wherever sin t ≠ 0 (the same answer can be written 3sint)
Double-check At t = 30°: cot 30° = 32 ÷ 12 = 3 and cos 30° = 32, so 3 · 3 · 32 = 92, and 3 sin 30° = 32. The start is 92 + 32 = 6. The answer: 3 csc 30° = 3 · 2 = 6. Both give 6.

9.6 Proving an identity by working on one side

Open the full lesson

The rule

To prove an identity in this course, work on one side.

Start with the more complicated side and rewrite it one step at a time, using only facts already known: the reciprocal, quotient and Pythagorean identities, the negative-angle facts, and fraction rules that keep the value (a common denominator, factoring, canceling a common factor, multiplying the top and the bottom by the same expression where it is not 0). Stop when the line reads exactly as the other side: the chain of equal lines proves the identity at every angle where every line is defined, and an angle a step leaves out, where both sides of the claim are defined, is checked on its own.
An argument that instead starts from the claim and does the same thing to both of its sides, such as moving a term (a piece joined to the rest by + or −) across the equals sign, shows only where the claim leads. It becomes a proof once every step is shown to run backwards, with any angle where a step cannot run backwards checked on its own. Working on one side needs no such check, which is why it is the method used here.

How

  1. Read the claim and decide which side is more complicated: more functions, more fractions, more terms or higher powers.
  2. Copy that side alone. The other side is the target: do not write on it, and do not move anything across the equals sign.
  3. Rewrite the side one step at a time. Each step is a new line that begins with =, made with the strategies in this lesson: sine and cosine, Pythagorean substitution, factoring, or multiplying by a conjugate.
  4. Beside each step, name the identity or fraction rule that makes it true.
  5. Stop when the line reads exactly as the target, and say that the identity holds.
  6. Check at a test angle such as 30° or 60°: both sides of the claim must give the same number. This catches slips; it does not replace the proof.

Worked example

Worked example

From (csc t − sin t)·tan t to cos t

Prove that (csc t − sin t)·tan t = cos t is an identity. In plain words: start with one side and rewrite it, using only facts you already know, until it reads exactly as the other side.

Show the steps and the answer

(csc t − sin t)·tan t

= (1sint − sin t)·sintcost sine and cosine

= 1−sin2tsint·sintcost common bottom

= cos2tsint·sintcost Pythagorean

= cos t cancel sin t and one cos t

  1. Choose the left side, (csct−sint)·tant, and leave cos t alone as the target.The left side has three functions, a subtraction and a product; the right side is one function. The more complicated side gives you moves to make.
  2. (csct−sint)·tant=(1sint−sint)·sintcostSine and cosine: the reciprocal identity csc t = 1sint and the quotient identity tan t = sintcost.
  3. =(1sint−sin2tsint)·sintcostTo subtract, sin t needs the bottom sin t: multiply it by sintsint, which is 1, to get sin2tsint.
  4. =1−sin2tsint·sintcostThe two fractions now share the bottom sin t, so subtract the tops.
  5. =cos2tsint·sintcostPythagorean identity: sin2t + cos2t = 1 rearranged gives 1 − sin2t = cos2t.
  6. =cos2t·sintsint·costMultiply fractions: top times top, bottom times bottom.
  7. =cost·cost·sintsint·cost=costcos2t is cos t · cos t. The factors sin t and cos t each sit on the whole top and the whole bottom, so they cancel, and one cos t is left.
  8. The last line, cos t, is exactly the right side, so the proof is done.Every line equals the line before it by a fact you can name, so the first line equals the last.
Answer
(csc t − sin t)·tan t = (1sint − sin t)·sintcost = 1−sin2tsint·sintcost = cos2tsint·sintcost = cos t, so the identity holds.
Double-check Test t = 30°, where csc 30° = 2, sin 30° = 12, tan 30° = 33 and cos 30° = 32. The left side is (2 − 12) · 33 = 32 · 33 = 336 = 32, which matches cos 30°. One angle cannot prove an identity, but a wrong step would most likely have shown up here.

The trap

The most common mistake is treating the claim like an equation to solve by moving a term across its equals sign, as in turning sec2t − tan2t = 1 into sec2t = 1 + tan2t. That starts from the claim before it is proved, so it shows only where the claim leads, and it is a proof only if every step can be run backwards. Copy one side alone, write = and the next form of that same side, and keep going until it reads exactly as the other side.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Two fractions over a common denominator

Prove that 11−sint + 11+sint = 2sec2t. In plain words: rewrite the left side until it reads 2sec2t.

Show the steps and the answer
  1. Work on the left side, 11−sint+11+sint.It has two fractions to combine; the right side is one term.
  2. =1+sint(1−sint)(1+sint)+1−sint(1−sint)(1+sint)Common denominator: multiply the top and the bottom of each fraction by the other fraction's bottom, which is multiplying by 1.
  3. =(1+sint)+(1−sint)(1−sint)(1+sint)Same bottom, so add the tops.
  4. =21−sin2tTop: sin t − sin t = 0 and 1 + 1 = 2 (gotcha: the sines cancel, so the top is not 2 + 2sin t). Bottom: difference of squares, (1 − sin t)(1 + sin t) = 1 − sin2t.
  5. =2cos2tPythagorean identity: 1 − sin2t = cos2t.
  6. =2·1cos2t=2sec2tsec t = 1cost, so sec2t = (1cost)2 = 1cos2t. This is the right side.
Answer
11−sint + 11+sint = 21−sin2t = 2cos2t = 2sec2t, so the identity holds.
Double-check At t = 30°: 11−sin30° = 1 ÷ 12 = 2 and 11+sin30° = 1 ÷ 32 = 23, so the left side is 2 + 23 = 83. The right side is 2 · sec230° = 2 · (23)2 = 2 · 43 = 83.

9.7 The usual mistakes in a proof

Open the full lesson

The rule

A proof of an identity leads from facts already known to the claim.

The method of this course starts from one side alone and changes only that side, one known identity or algebra move at a time, until it becomes the other side.
An argument that starts from the whole claim and does the same thing to both sides shows only where the claim leads. It becomes a proof once every step is shown to walk back, with any angle where a step cannot walk back checked on its own. Squaring both sides walks back only where the two sides are known to have the same sign. Multiplying both sides by an expression does not walk back where that expression is 0, and dividing both sides by it is not possible there.

How

  1. Pick the more complicated side of the claim. It is the only side you will change.
  2. Write that side alone as your first line, with no equals sign and no other side yet.
  3. Change it one step at a time, with an identity you name or an algebra move: combining fractions, factoring, or multiplying one fraction's top and bottom by the same expression.
  4. Before you cancel, check that the factor sits in both the top and the bottom of one fraction.
  5. Do not square, multiply or divide the two sides of the claim: each of those moves starts from the claim and needs a walk-back check that this method never needs.
  6. Stop when your line is exactly the other side. If you are stuck, test an angle: two different values there mean the claim is false and no proof exists.

Worked example

Worked example

Repairing an argument that works both sides

Someone wants to show that sin2t1−cost − cos t = 1 is an identity and writes:
Line 1: sin2t1−cost − cos t = 1
Line 2: sin2t1−cost = 1 + cos t (add cos t to both sides)
Line 3: sin2t = (1 + cos t)(1 − cos t) (multiply both sides by 1 − cos t)
Line 4: sin2t = 1 − cos2t (multiply out)
Line 5: sin2t + cos2t = 1 (add cos2t to both sides), which is true.
They stop there. Say what the five lines show when read from top to bottom, what has to be checked before they count as a proof, and then write a proof that starts from one side.

Show the steps and the answer

sin2t1−cost−cost

=1−cos2t1−cost−cost

=(1−cost)(1+cost)1−cost−cost

=1+cost−cost

= 1

  1. Say what the question asks: what the five lines show as written, what they still need, and a proof from one side.A proof is judged by how its lines are built, not only by whether the last line is true.
  2. Read Line 1: it is the whole claim, left side = right side.The argument starts from the claim, the very thing to be shown, so the lines under it show where the claim leads.
  3. Read Lines 2, 3 and 5: each does the same thing to both sides (adds cos t, multiplies by 1−cost, adds cos2t).Doing the same thing to both sides is how you solve an equation. Each such step says: if the line above is true, the line below is true.
  4. Say what the lines show from top to bottom: if the claim is true, then sin2t+cos2t=1. A true last line does not by itself make the first line true.False starts can reach true finishes too: squaring the false 3 = −3 gives the true 9 = 9.
  5. Check whether every step can be walked back, from Line 5 up to Line 1: subtracting cos2t undoes Line 5, Line 4 only rewrites the right side of Line 3, dividing by 1−cost undoes Line 3, and subtracting cos t undoes Line 2.Dividing by 1 − cos t is allowed here because 1 − cos t is the bottom of the claim's left side, so it is not 0 at any angle where the claim's sides are defined. With this check written down, the lines read from bottom to top are a proof; without it they are not.
  6. Now the method that needs no such check. Start from the left side alone: sin2t1−cost−cost.It is the more complicated side; the right side, 1, has nothing to rewrite.
  7. Replace sin2t with 1−cos2t: =1−cos2t1−cost−cost.The Pythagorean identity sin2t + cos2t = 1 gives sin2t = 1 − cos2t, so the value stays the same.
  8. Factor the top as a difference of squares: =(1−cost)(1+cost)1−cost−cost.1 − cos2t has the shape a2 − b2 with a = 1 and b = cos t, and a2 − b2 = (a − b)(a + b).
  9. Cancel the factor 1−cost from the top and the bottom: =1+cost−cost.Wherever the left side makes sense, its bottom 1 − cos t is not 0, so dividing top and bottom by it keeps the value. This is canceling inside one fraction, not dividing both sides.
  10. Combine: 1+cost−cost=1, which is the right side.cos t − cos t = 0, and every line equals the one before it, so the left side equals the right side.
Answer
  • Read from top to bottom, the five lines show only that if the claim is true, then sin2t + cos2t = 1.
  • To count as a proof they need a check that every step can be walked back. Here each one can, at every angle where the claim's sides are defined, because 1 − cos t is not 0 at those angles. With that check written down, the lines read from bottom to top are a proof.
  • A proof from one side, with nothing to walk back: sin2t1−cost − cos t = 1−cos2t1−cost − cos t = (1−cost)(1+cost)1−cost − cos t = 1 + cos t − cos t = 1.
Double-check Test two angles. At t = 90°: sin 90° = 1 and cos 90° = 0, so the left side is 11−0 − 0 = 1. At t = 60°: sin260° = 34 and 1 − cos 60° = 12, so 34 ÷ 12 = 32 and 32 − 12 = 1. Both equal the right side, 1, as an identity must; the tests can only catch a false claim, and the chain from one side is the proof.

The trap

The most common mistake is writing the claim as the first line and then doing the same thing to both sides until a true line appears. It feels like solving an equation, but it starts from the very thing you are proving, and the same moves can carry a false claim to a true line, so the true line proves the claim only if every step can be walked back. Start from one side alone and turn it into the other.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

Squaring hides a minus sign

Someone claims that cos t and −cos t are the same number at every angle, because their squares, cos2t and (−cos t)2, are the same number at every angle. Is the claim right?

Show the steps and the answer
x = cos θy = sin θ(1, 0)
At 0° the point is (1, 0), so cos 0° = 1 while −cos 0° = −1.
  1. Say what the question asks: is cos t equal to −cost at every angle?An identity has to hold at every angle where both sides make sense, and here both sides make sense at every angle.
  2. Flag the squaring step: (−cost)2=cos2t is true, but it says nothing about cos t and −cost themselves.A negative times a negative is positive, so squaring wipes out the minus sign: two numbers with the same square can still be opposites.
  3. Test t=0°: cos0°=1, so the left side is 1 and the right side is −1.The point at 0° on the unit circle is (1, 0), and cos t is its x coordinate.
  4. Compare: 1≠−1, so the claim fails at 0°.One angle where both sides make sense and differ is enough to show a claim is not an identity.
Answer
  • No: at t = 0°, cos t = 1 but −cos t = −1, so cos t = −cos t is not an identity.
  • Squaring made a false claim look true.
Double-check Test a second angle, t = 180°: cos 180° = −1, so the left side is −1 and the right side is 1, and again they differ.

10 Sum and difference formulas

7 lessonsOpen the unit's crash course

10.1 Why cos(a + b) is not cos a + cos b

Open the full lesson

The rule

cos(a+b)≠cosa+cosb in general: for example, cos(π4+π4)=cosπ2=0, while cosπ4+cosπ4=2.

Sine behaves the same way: sin(a+b)≠sina+sinb in general.

How

  1. Read the parentheses as an instruction: cos(a + b) means add the angles first, then take one cosine of the total.
  2. To test a claim such as cos(a + b) = cos a + cos b, pick angles whose exact values you know from the unit circle: 0, π6, π4, π3, π2 or π.
  3. Work the left side: add the angles, find where the total turn lands on the unit circle, and read the x of that point.
  4. Work the right side: read the x for each angle on its own, then add the two numbers.
  5. Compare the two sides. If they differ, the claim is false and your pair is a counterexample. If they agree, nothing is proved yet: try another pair.
  6. Finish with a size check: one sine or one cosine always lies from −1 to 1, so a side outside that range cannot be a single cosine.

Worked example

Worked example

The counterexample a = b = π4

Test the claim cos(a + b) = cos a + cos b with a = π4 and b = π4.

Show the steps and the answer
a = 45°terminal sideinitial side
First turn: a = π4 = 45°, measured from the positive x-axis.
b = 45°terminal sideinitial side
Second turn: b = 45° more, starting where the first turn stopped, so the two together end straight up at 90°.
(0, 1)
The whole turn π2 ends at the top point (0, 1), so cos(a + b) is its x, 0.
x = cos θy = sin θP
One 45° turn lands at (22, 22), so each leg is about 0.7071 and two of them add to more than the radius 1.
  1. Say what the question asks: work out the left side and the right side with a=π4 and b=π4, then see whether the two numbers match.A rule has to give equal sides for every pair of angles, so one pair where the sides differ shows the claim is false.
  2. Left side, inside first: a+b=π4+π4=2π4=π2.The parentheses say to add the angles before taking any cosine. Both bottoms are 4, so add the tops, π + π = 2π, then divide the top and bottom of 2π4 by 2.
  3. Picture the two turns one after the other: 45° from the positive x-axis, then 45° more from where the first turn stopped. Together they make 90°, which ends at the top of the unit circle, the point (0, 1).π = 180°, so π4 = 45° and π2 = 90°, and a 90° turn from the positive x-axis points straight up.
  4. So cos(a+b)=cosπ2=0.The cosine of an angle is the x of the point where the turn lands, and the point (0, 1) has x = 0.
  5. Right side: cosπ4=22, an exact value.A 45° turn lands at (22, 22) on the unit circle, from the 45-45-90 triangle with hypotenuse 1, and the cosine is the x of that point.
  6. Add the two cosines: 22+22=222=2.The bottoms match, so add the tops: one 2 plus one 2 is two 2. Then 22 = 1 leaves 2.
  7. Compare: the left side is 0 and the right side is 2≈1.414 (rounded). They are different numbers.2 is a positive number, about 1.414, so it is not 0.
  8. Conclude: the claim is false, and the pair a=b=π4 is a counterexample.A counterexample is one case where a claimed rule gives the wrong answer, and one is enough to throw the rule out.
Answer
  • cos(π4+π4)=cosπ2=0
  • cos π4 + cos π4 = 2 ≈ 1.414 (rounded)
  • The sides differ, so cos(a + b) = cos a + cos b is false.
Double-check Second way, with decimals: 22 ≈ 0.7071 (rounded), so the right side is about 0.7071 + 0.7071 = 1.4142, which matches 2 ≈ 1.4142. No cosine can be more than 1, because it is the x of a point on a circle of radius 1, so 2 cannot be the cosine of π2 or of any angle, while the left side, 0, is the x of the top point (0, 1).

The trap

Splitting the cosine over the plus sign: writing cos(a + b) = cos a + cos b, or its twin cos(2a) = 2 cos a. Avoid it by adding the angles first and taking one cosine of the total, then checking that the answer lies from −1 to 1.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

Two different special angles

Test the claim cos(a + b) = cos a + cos b with a = π3 and b = π6.

Show the steps and the answer
a = 60°b = 30°sum = 90°
A 60° turn and then a 30° turn make one 90° turn, which ends at the top of the circle where the cosine is 0.
  1. Say what it asks: work out each side with a=π3, which is 60°, and b=π6, which is 30°, then compare.One pair where the sides differ is enough to show the claim is false.
  2. Left side, inside first: π3+π6=2π6+π6=3π6=π2.The bottoms differ, so rewrite π3 with bottom 6 by multiplying its top and bottom by 2. Then add the tops, and divide the top and bottom of 3π6 by 3.
  3. cosπ2=0.60° + 30° = 90°, a quarter turn to the top point (0, 1), whose x is 0.
  4. Right side: cosπ3+cosπ6=12+32=1+32.60° lands at (12, 32) and 30° at (32, 12), from the 30-60-90 triangle with hypotenuse 1, so the cosines are 12 and 32. The bottoms match, so the tops go over one bottom. 1 and 3 are different kinds of number, so 1 + 3 stays as it is; it is not 4.
  5. Compare: 1+32≈1+1.7322=2.7322=1.366 (rounded), which is not 0. The claim fails.3 ≈ 1.732 (rounded), and a positive number divided by 2 is still positive, so it cannot be 0.
Answer
  • cos(π3+π6)=0
  • cos π3 + cos π6 = 1+32 ≈ 1.366 (rounded)
  • The claim fails.
Double-check Second way, a size check: 1+32 ≈ 1.366 is more than 1, and no cosine is more than 1, so the right side cannot be cos π2 or the cosine of any angle.

10.2 The cosine of a difference, from a distance on the circle

Open the full lesson

The rule

For every pair of angles a and b, in degrees or in radians: cos(a−b)=cosacosb+sinasinb.

How

  1. Read what is asked: cos(a − b) is the cosine of one angle, the gap a − b. It is not two cosines with a minus between them.
  2. Name the angles: a is the angle before the minus sign and b is the angle after it.
  3. Write the four values cos a, sin a, cos b and sin b from the unit circle or the special triangles, each with the sign its quadrant gives it.
  4. Multiply the two cosines: cos a · cos b.
  5. Multiply the two sines: sin a · sin b.
  6. Add the two products. The sign between them is plus, even though the angle has a minus.
  7. Check: when the gap a − b is an angle whose cosine you know, the result must equal that cosine.

Worked example

Worked example

One chord, two ways: the points at 90° and 30°

On the unit circle, P is the point at 90° and Q is the point at 30°. Find the length of the chord PQ where it sits, and again after turning the circle back (clockwise) by 30°. Then test the difference formula with a = 90° and b = 30°. In plain words: measure one straight line in two pictures, check that the two lengths agree, and check that cos 90° cos 30° + sin 90° sin 30° equals cos(90° − 30°).

90° − 30° = 60°
Where the points sit: Q at 30°, P at 90°, a 60° gap between them.
60°
After turning back by 30°: Q at 3 o'clock and P at 60°, the same 60° gap.
Show the steps and the answer
30°60°√31245°45°11√2
The 30-60-90 triangle.
  1. Write the points where they sit: P=(cos90°,sin90°)=(0,1) and Q=(cos30°,sin30°)=(32,12).On the unit circle the point at angle t is (cos t, sin t). 90° points straight up, and the 30° values come from the 30-60-90 triangle.
  2. First way: PQ2=(0−32)2+(1−12)2.The distance formula subtracts the x's and the y's, squares each difference and adds. Working with PQ2 leaves the square root for the very end.
  3. Work out each square: (−32)2=34, and 1−12=12, so (12)2=14.To square a fraction, square its top and its bottom; 3 · 3 = 3, and a negative number times itself is positive.
  4. Add: PQ2=34+14=44=1.The bottoms match, so add the tops.
  5. Turn the circle back by 30°: Q moves to 30°−30°=0°, the point (1, 0), and P moves to 90°−30°=60°, the point (12,32).Turning back by 30° takes 30° off every angle. Both points move together, so the chord between them keeps its length.
  6. Second way: PQ2=(12−1)2+(32−0)2=(−12)2+34=14+34=1.The same distance formula on the turned points; 12 − 1 = −12, whose square is 14.
  7. Both ways give PQ2=1, so PQ =1=1.A length is never negative, so PQ is the positive square root of PQ2.
  8. Formula side: cos90°cos30°+sin90°sin30°=0·32+1·12=12.From P = (0, 1), cos 90° = 0 and sin 90° = 1; anything times 0 is 0.
  9. Gap side: cos(90°−30°)=cos60°=12. The two sides match.After the turn, P sat at 60°, and its x coordinate is cos 60° = 12.
Answer
  • PQ = 1 both ways.
  • cos90°cos30°+sin90°sin30°=12=cos(90°−30°).
Double-check Look at the triangle made by the center O and the points P and Q. Its sides OP and OQ are radii, both 1 long, with the 60° gap between them. A triangle with two equal sides is a mirror image of itself across its middle, so its other two angles are equal; together they make 180° − 60° = 120°, so each is 120° ÷ 2 = 60°. A triangle whose three angles are all 60° has three equal sides (it is the triangle that the 30-60-90 triangle is half of), so PQ = OP = 1, as both measurements found.

The trap

Copying the minus sign. The angle inside is a − b, so a minus between the two products feels natural, but the formula has a plus: cos(a − b) = cos a cos b + sin a sin b. Catch it with a = b: the gap is 0° and cos 0° = 1, and only the plus gives cos2a + sin2a = 1.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

A gap past half a turn, 300° and 60°

P is the point at 300° and Q is the point at 60° on the unit circle. Find PQ2 both ways and test the difference formula with a = 300° and b = 60°. In plain words: the gap 300° − 60° = 240° is more than half a turn; does the method still work, and does the formula give a negative cosine correctly?

Show the steps and the answer
300° − 60° = 240°
The gap runs more than half a turn.
  1. Write the points: P=(12,−32) and Q=(12,32).300° is 60° short of 360°, in quadrant IV, where cosine is positive and sine negative; 60° gives (12, 32).
  2. First way: PQ2=(12−12)2+(−32−32)2=02+(−3)2=3.The x's are equal; two halves of 3, with a minus, make −3; and (−3)2 = 3.
  3. Turn the circle back by 60°: Q moves to 0°, the point (1, 0), and P moves to 300°−60°=240°, the point (−12,−32).240° is 60° past 180°, in quadrant III, where both coordinates are negative.
  4. Second way: PQ2=(−12−1)2+(−32−0)2=(−32)2+34=94+34=124=3.−12 − 1 = −32, whose square is 94; a negative squared is positive.
  5. Formula side: 12·12+(−32)·32=14−34=−24=−12.3 · 3 = 3, a negative times a positive is negative, and 24 reduces to 12.
  6. Gap side: cos(300°−60°)=cos240°=−12. The two sides match.The turned point P = (−12, −32) sits at 240°, and its x coordinate is −12.
Answer
  • PQ2 = 3 both ways, so PQ = 3.
  • The formula gives −12 = cos 240°.
Double-check P and Q share the x coordinate 12, so the chord stands upright and its length is the distance between the heights: 32 − (−32) = 3, whose square is 3.

10.3 The cosine of a sum and the sine formulas

Open the full lesson

The rule

For every pair of angles a and b:cos(a+b)=cosacosb−sinasinbsin(a+b)=sinacosb+cosasinbsin(a−b)=sinacosb−cosasinb

How

  1. Say what the question asks: is it a sine or a cosine, and are the two angles added or subtracted? Call the first angle a and the second b.
  2. Write the matching formula in letters, sign included, before any number goes in. Cosine matches like with like and switches the sign; sine mixes and keeps it.
  3. Find the four values cos a, sin a, cos b and sin b from the special triangles or the unit circle.
  4. Put each value in its place and do the two multiplications: top times top, bottom times bottom.
  5. Add or subtract the two results as the formula says, and simplify to an exact value: fractions and roots, no rounding.
  6. Check: if the whole angle a + b or a − b is one whose value you already know, find that value directly and compare.

Worked example

Worked example

The cosine of 60° + 60°

Find cos(60° + 60°) with the sum formula for cosine, and check the answer.

Show the steps and the answer
30°60°√31245°45°11√2
In the 30-60-90 triangle the side next to 60° is 1 and the side across from it is 3, over the hypotenuse 2.
x = cos θy = sin θ120°
The point at 120° sits left of the y-axis, so its x, which is cos 120°, is negative: −12.
  1. Say what it asks: the angle is made of two pieces, a=60° and b=60°. Find the cosine of the whole angle from the sines and cosines of the pieces.The formula is written in a and b, so name them first.
  2. Write the formula with its sign: cos(a+b)=cosacosb−sinasinb.Cosine matches like with like, cos with cos and sin with sin, and switches the sign: a plus inside, a minus in the middle.
  3. Read the values: cos60°=12 and sin60°=32.In the 30-60-90 triangle with sides 1, 3 and 2, the side next to 60° is 1 and the side across from it is 3, each over the hypotenuse 2.
  4. Multiply each pair: cos60°·cos60°=12·12=14, and sin60°·sin60°=32·32=34.Top times top and bottom times bottom; 3 · 3 = 3.
  5. Subtract: 14−34=1−34=−24=−12.The bottoms match, so subtract the tops; then divide top and bottom by 2.
Answer
cos(60°+60°)=−12
Double-check 60° + 60° = 120°. On the unit circle, 120° is in the second quadrant (between 90° and 180°) and 60° short of 180°, so its point is the 60° point mirrored across the y-axis: the x turns negative, and cos 120° = −cos 60° = −12. Same answer. Adding the cosines instead gives 12 + 12 = 1, which is the cosine of 0°, not of 120°.

The trap

The sign in the cosine formulas. The cosine of a sum has a minus in the middle, and the cosine of a difference has a plus: cosine switches the sign you see inside, while sine keeps it. With a plus, cos(90° + 90°) would come out 0 · 0 + 1 · 1 = 1, but the point at 180° is (−1, 0), so the true value is −1. Write the formula in letters, sign included, before any number goes in, and say cosine switches, sine stays as you write it.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

Radians and two multiplications

Find cos(π6 + π6) with the sum formula for cosine.

Show the steps and the answer
30°60°√31245°45°11√2
The 30-60-90 triangle gives cos 30° = 32, sin 30° = 12 and the check value cos 60° = 12.
  1. Say what it asks: a=b=π6, which is 30° because π is 180° and 180°÷6=30°; find the cosine of the whole angle.In degrees you can read the values from the 30-60-90 triangle.
  2. Write cos(a+b)=cosacosb−sinasinb.Cosine matches like with like and switches the sign.
  3. cos30°=32 and sin30°=12.In the 30-60-90 triangle the side next to 30° is 3 and the side across from it is 1, each over the hypotenuse 2.
  4. cosacosb=32·32=34 and sinasinb=12·12=14.Top times top, bottom times bottom; 3 · 3 = 3.
  5. 34−14=24=12.The bottoms match, so subtract the tops; then divide top and bottom by 2.
Answer
cos(π6+π6)=12
Double-check π6 + π6 = 2π6 = π3, which is 60°, and cos 60° = 12. Same answer. The gotcha: when adding π6 + π6, add only the tops; adding the bottoms too gives 2π12 = π6, which is wrong.

10.4 Exact values of angles such as 15 degrees and 75 degrees

Open the full lesson

The rule

If θ=a+b or θ=a−b, where a and b are special angles, the sum formula or the difference formula gives sinθ and cosθ exactly:sin(a+b)=sinacosb+cosasinb and sin(a−b)=sinacosb−cosasinbcos(a+b)=cosacosb−sinasinb and cos(a−b)=cosacosb+sinasinb

How

  1. Write the angle as a sum or a difference of two special angles, in the order that gives the angle itself (75° = 45° + 30°, 15° = 45° − 30°, −15° = 30° − 45°).
  2. Pick the formula that matches the question: sine or cosine, sum or difference.
  3. Write down sin a, cos a, sin b and cos b from the special-angle triangles, each with the sign of its quadrant.
  4. Substitute the four values into the formula, keeping the sign in the middle.
  5. Multiply each pair: tops times tops, bottoms times bottoms, and two roots join under one root.
  6. Combine the two products over their common bottom 4, leaving different roots apart.
  7. Check: compare the decimal of your answer with a calculator in the right mode, and ask whether the size and sign fit the picture.

Worked example

Worked example

The exact value of sin 15°

Find the exact value of sin 15°, then check it with a decimal. In plain words: write sin 15° as a number made of fractions and square roots, with nothing rounded, then make sure it agrees with the calculator's rounded value.

Show the steps and the answer
30°60°√31245°45°11√2
Every value used here comes from these two triangles: 30° and 60° from the first, 45° from the second.
x = cos θy = sin θP
The point at 15° sits low on the circle, so its height, sin 15°, is a small number, about 0.26.
  1. Write 15°=45°−30°.15° is not in the special-angle table, but 45° and 30° are, and 45 − 30 = 15. The larger angle goes first, so the difference is 15° and not −15°.
  2. Choose sin(a−b)=sinacosb−cosasinb, with a=45° and b=30°: sin15°=sin45°cos30°−cos45°sin30°.The question asks for a sine, and the angle is a difference. Sine mixes the pairs (a sine with a cosine) and keeps the minus sign that sits between the angles.
  3. Write the four values: sin45°=22,cos30°=32,cos45°=22,sin30°=12.They come from the 45-45-90 and 30-60-90 triangles in the first picture. Both angles are in quadrant I, so all four values are positive.
  4. Substitute: sin15°=22·32−22·12.Each name in the formula is replaced by its number, and the minus sign between the two products stays.
  5. Multiply each pair: 22·32=64 and 22·12=24.To multiply fractions, multiply the tops and multiply the bottoms. Two square roots multiply under one root: 2 · 3 = 6. Each bottom is 2 · 2 = 4.
  6. Subtract: 64−24=6−24.Both fractions have the bottom 4, so subtract the tops and keep the 4. 6 and 2 are different roots, so 6 − 2 stays as it is.
Answer
  • sin 15° = 6−24 (exact)
  • sin 15° ≈ 0.2588 (rounded)
Double-check Decimal: 6 ≈ 2.4495 and 2 ≈ 1.4142, so the top is about 1.0353, and 1.0353 ÷ 4 ≈ 0.2588. A calculator in degree mode gives sin 15° ≈ 0.2588, so the two agree.
Second build: 15° is also 60° − 45°, and sin 60° cos 45° − cos 60° sin 45° = 32 · 22 − 12 · 22 = 64 − 24, the same exact value.

The trap

Getting the sign wrong in the cosine formula. cos 15° = cos(45° − 30°) has a plus in the middle: cos 30° cos 45° + sin 30° sin 45° = 6+24 ≈ 0.9659. Copying the minus from the angles gives 6−24 ≈ 0.2588, which is cos 75°, not cos 15°. Catch it with a size check: a small angle such as 15° has a cosine close to 1, so its cosine must be the larger of the two numbers.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

The same idea in radians: cos π12

Find the exact value of cos π12. In plain words: the angle is given in radians; write its cosine with fractions and square roots.

Show the steps and the answer

π3=4π12(60°)

π4=3π12(45°)

4π12−3π12=π12(15°)

  1. Write π12 as a difference of special angles: π3−π4=4π12−3π12=π12.π3 (60°) and π4 (45°) are special. To subtract the fractions, put both over the common bottom 12: π3 = 4π12 and π4 = 3π12, and 4 − 3 = 1.
  2. Use cos(a−b)=cosacosb+sinasinb with a=π3 and b=π4: cosπ12=cosπ3cosπ4+sinπ3sinπ4.It is the cosine of a difference: matched pairs, and the minus between the angles flips to a plus.
  3. Put in the values: 12·22+32·22.cos π3 = 12 and sin π3 = 32 (the 60° values); cos π4 = sin π4 = 22 (the 45° values).
  4. Multiply: 24+64.1 · 2 = 2 and 3 · 2 = 6 on top; 2 · 2 = 4 on the bottom.
  5. Add: 2+64, the same as 6+24.Same bottom, so add the tops; the order of the two terms in a sum does not matter.
Answer
  • cos π12 = 6+24 (exact)
  • cos π12 ≈ 0.9659 (rounded)
Double-check A calculator in radian mode gives cos(π ÷ 12) ≈ 0.9659, and (2.4495 + 1.4142) ÷ 4 ≈ 0.9659.
A second build: π12 is 180°12 = 15°, and 15° = 45° − 30° gives cos 45° cos 30° + sin 45° sin 30° = 64 + 24, the same exact value.

10.5 The tangent of a sum or a difference

Open the full lesson

The rule

tan(a+b)=tana+tanb1−tanatanb and tan(a−b)=tana−tanb1+tanatanbBoth need tan a and tan b to exist.

When the bottom is 0, the tangent of the sum or difference is undefined.

How

  1. Say what is asked: the tangent of a sum or difference of two angles, either an exact value for one angle or a value from two tangents you are given.
  2. If you start from one angle, write it as a sum or difference of two angles whose tangents you know. Leave out 90° and 270°, which have no tangent.
  3. Choose by the sign between the angles: the sum formula for a + b, the difference formula for a − b.
  4. Put each tangent in its place, and wrap a negative one in parentheses.
  5. Work out the bottom first. If it is 0, stop: the tangent of the sum or difference is undefined.
  6. Work out the top, divide the top by the bottom, and clear any square root from the bottom.
  7. Check: the sign must match the quadrant where the angle lands, and a calculator decimal must match your answer.

Worked example

Worked example

The exact value of tan 75°

Find the exact value of tan 75°.

Show the steps and the answer
45°30°sum = 75°
75° is a turn of 45° and then 30° more, two angles from the table.
input θoutput tan θ0°030°(√3)/345°160°√3↓ evaluate: input given, read the output below it
The special tangents: the highlighted columns under 30° and 45° hold the two values this example needs.
  1. Say what it asks: tan75° written with whole numbers and square roots, not a rounded decimal. 75° is not on the table of special angles, so build it from two angles that are.An exact value keeps every digit, and the sum formula needs angles whose tangents we already know exactly.
  2. Write 75°=45°+30°.45° and 30° are both on the table, they add to 75°, and neither is 90°, so both tangents exist.
  3. Read the two tangents from the table: the column under 45° holds 1, and the column under 30° holds 33.These are the special values, highlighted in the picture.
  4. Use the sum formula: tan75°=tan45°+tan30°1−tan45°tan30°.The angles are added, so the top gets a plus and the bottom gets 1 minus the product.
  5. Work out the bottom first: 1−1·33=33−33=3−33, about 0.42, so not 0.Multiplying by 1 changes nothing, and writing 1 as 33 lets us subtract over the same bottom. A bottom of 0 would mean 75° points straight up, and it does not.
  6. Work out the top: 1+33=33+33=3+33.The same move: write 1 with bottom 3, then add the tops.
  7. Divide the top by the bottom: 3+33÷3−33=3+33×33−3=3+33−3.To divide by a fraction, multiply by its flip; the 3 on the bottom of the first fraction cancels the 3 on top of the second.
  8. Clear the square root from the bottom: multiply top and bottom by 3+3. The bottom becomes (3−3)(3+3)=9−3=6.(p − q)(p + q) = p2 − q2, and (3)2 = 3, so the root disappears. Multiplying top and bottom by the same number keeps the value.
  9. The top becomes (3+3)2=9+63+3=12+63.(p + q)2 = p2 + 2pq + q2: here p2 = 9, 2pq = 2 · 3 · 3 = 63, and q2 = 3.
  10. Divide each part of the top by 6: 12+636=126+636=2+3.A top made of added parts splits into one fraction per part, all over the same bottom.
Answer
tan 75° = 2 + 3 (exact), about 3.732 (rounded)
Double-check Second way, with a calculator in degree mode: tan 75° ≈ 3.7321, and 2 + 3 ≈ 2 + 1.7321 = 3.7321. They match. Third way, as sine over cosine: sin 75° ≈ 0.9659 and cos 75° ≈ 0.2588, and 0.9659 ÷ 0.2588 ≈ 3.732.

The trap

Putting the same sign on the bottom as on top, for example 1 + tan a tan b in the sum formula. The bottom always takes the other sign. Test it with 45° + 45° = 90°, where tangent does not exist: the bottom must come out 0, and only 1 − 1 · 1 does.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Rung 4, a negative tangent goes in: radians and a double negative

Find the exact value of tan 11π12.

Show the steps and the answer
P
11π12 is 165°.
  1. Say what it asks: an exact tangent for the angle 11π12 radians. Since π radians is 180°,π12 is 15°, and 11π12 is 11×15°=165°, which is not on the table.Changing to degrees shows where the angle lands and which pieces can build it.
  2. Split it: 3π4=9π12 and π6=2π12, so 3π4+π6=11π12.To add fractions of π, give them the same bottom: 9 twelfths plus 2 twelfths is 11 twelfths. In degrees, 135° + 30° = 165°.
  3. The tangents: tan3π4=−1 and tanπ6=33.3π4 is 135°, in quadrant II with reference angle 45°, so its tangent is −1; π6 is 30°.
  4. Bottom first, with the negative in parentheses: 1−(−1)·33=1+33=3+33.(−1) times 33 is −33, and subtracting a negative adds it. The bottom is not 0.
  5. Top: −1+33=−3+33.Write −1 as −33 to add over the same bottom.
  6. Divide: −3+33÷3+33=−3+33+3.Multiply by the flip; the two 3s cancel.
  7. Multiply top and bottom by 3−3. Bottom: (3+3)(3−3)=9−3=6.Flipping the middle sign of the bottom clears its root.
  8. Top: −3+3 is −(3−3), so the top is −(3−3)2=−(9−63+3)=−12+63.Pulling out the minus sign turns the top into a square, and (p − q)2 = p2 − 2pq + q2.
  9. Simplify: −12+636=−2+3, which is 3−2.Divide each part of the top by 6.
Answer
tan 11π12 = 3 − 2 (exact), about −0.268 (rounded)
Double-check Second way, from rung 3: 165° = 180° − 15°, so its reference angle is 15°, and in quadrant II the tangent is negative: tan 165° = −tan 15° = −(2 − 3) = 3 − 2. It matches. A calculator in radian mode gives tan(11π ÷ 12) ≈ −0.2679, and 1.7321 − 2 = −0.2679.

10.6 Using the formulas from one value of each angle

Open the full lesson

The rule

One value and the quadrant fix the other value of the same angle: cosa=±1−sin2a and sinb=±1−cos2b, each sign chosen by that angle's quadrant.

Then sin(a+b)=sinacosb+cosasinb and cos(a−b)=cosacosb+sinasinb.

How

  1. Say in plain words what is given (one value of each angle and its quadrant) and what is asked (for example sin(a + b) and cos(a − b)).
  2. Write the four-slot list sin a, cos a, sin b, cos b, and copy in the two given values.
  3. Turn each given value into a right triangle: sine is yr and cosine is xr, with any minus sign on x or y and r always positive.
  4. Find the missing leg with x2 + y2 = r2, then give it the sign its quadrant demands.
  5. Write each missing value as that leg over r, so all four slots are full.
  6. Substitute the four values, each in parentheses, into the sum formula or difference formula, multiply, and combine over the common bottom.
  7. Check that each answer lies between −1 and 1 and that estimates of the angles give the same sign and size.

Worked example

Worked example

Sin a in Quadrant II and cos b in Quadrant IV

sin a = 817 with a in Quadrant II, and cos b = 45 with b in Quadrant IV. Find the exact values of sin(a + b) and cos(a − b).

Show the steps and the answer
xyθx = −15y = 8rP(−15, 8)Ox = −15 (15 left) y = 8 (8 up) r = 17the ray from O through P (and beyond) = the terminal side
a's point: 8 up and 15 to the left, 17 from the center, so cos a = −1517.
xyθx = 4y = −3rP(4, −3)Ox = 4 (4 right) y = −3 (3 down) r = 5the ray from O through P (and beyond) = the terminal side
b's point: 4 to the right and 3 down, 5 from the center, so sin b = −35.
  1. Say what the question asks. It gives one value of each angle and the quadrant each angle points into, and it wants two exact values: the sine of the angle a+b and the cosine of the angle a−b.Naming the targets picks the formulas, sin(a + b) = sin a cos b + cos a sin b and cos(a − b) = cos a cos b + sin a sin b, and both use all four of sin a, cos a, sin b and cos b.
  2. Fill the four-slot list with what is given: sina=817,cosa= ?, sinb= ?, cosb=45.Two slots are empty, cos a and sin b, so those are the two values to rebuild.
  3. Turn sina=817 into a point: sine is yr, so take y=8 and r=17, a point 8 above the x-axis and 17 from the center.Every point on the angle's side gives the same sine, and this choice keeps the numbers whole.
  4. Find the left-right leg: x2+82=172, so x2=289−64=225, and x is 15 or −15.The legs x and y and the slanted side r form a right triangle, so the Pythagorean theorem holds. Both 15 and −15 square to 225, so the root gives the size but not the sign.
  5. Choose the sign: a is in Quadrant II, left of the y-axis, so x=−15. Plug back in: (−15)2+82=225+64=289=172.Every point left of the y-axis has a negative x. The plug-back shows the point really is 17 from the center.
  6. So cosa=xr=−1517=−1517.Cosine is x over r, and r is a distance, always positive.
  7. Do the same for b: cosb=45=xr, so x=4 and r=5. Then y2=52−42=25−16=9, and y is 3 or −3.The same right triangle, but now the missing leg is the up-down one.
  8. b is in Quadrant IV, below the x-axis, so y=−3 and sinb=yr=−35. Plug back in: 42+(−3)2=16+9=25=52.Every point below the x-axis has a negative y.
  9. The full list: sina=817,cosa=−1517,sinb=−35,cosb=45.With every slot filled and signed, the formulas become copying.
  10. sin(a+b)=sinacosb+cosasinb=(817)(45)+(−1517)(−35).This is the sine sum formula: the sine of one angle times the cosine of the other, done both ways and added. Parentheses keep each sign attached to its value.
  11. =3285+4585=7785.Tops times tops (8 · 4 = 32 and 15 · 3 = 45), bottoms times bottoms (17 · 5 = 85), and a negative times a negative is positive. The bottoms match, so add the tops: 32 + 45 = 77.
  12. cos(a−b)=cosacosb+sinasinb=(−1517)(45)+(817)(−35).This is the cosine difference formula: cosine times cosine plus sine times sine. For a difference the middle sign is plus.
  13. =−6085−2485=−8485.15 · 4 = 60 and 8 · 3 = 24. Each product has exactly one negative factor, so each is negative. Over the shared bottom 85: −60 − 24 = −84.
  14. Make sure both answers are finished: 77=7·11,84=2·2·3·7 and 85=5·17 share no factor, and both fractions lie between −1 and 1.A fraction is finished when its top and bottom share no factor. A sine or cosine is a coordinate on the unit circle, so it is never below −1 or above 1.
Answer
  • sin(a+b)=7785
  • cos(a−b)=−8485
Double-check Second way, by estimating the angles on a calculator in degree mode. Trying angles shows sin 28° ≈ 0.469, close to 817 ≈ 0.471, so a's reference angle is about 28° and a ≈ 180° − 28° = 152°. Trying again shows cos 37° ≈ 0.799, close to 45 = 0.8, so b is about 37° below the positive x-axis: b ≈ −37°, the same direction as 323°. Then a + b ≈ 152° − 37° = 115°, and sin 115° ≈ 0.906, matching 7785 ≈ 0.906. And a − b ≈ 152° + 37° = 189°, and cos 189° ≈ −0.988, matching −8485 ≈ −0.988. Had cos a lost its minus sign, sin(a + b) would have come out −1385 ≈ −0.153, which does not match: the estimate catches the sign slip.

The trap

Dropping the sign of the missing value. The square root gives only the size, as in 225 = 15. Writing cos a = 1517 for an angle in Quadrant II turns the main example's sin(a + b) = 7785 into −1385. Choose the sign from the quadrant in the same step where you take the root, before the value goes anywhere near a formula.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

One angle in Quadrant II

sin a = 2129 with a in Quadrant II, and cos b = 45 with b in Quadrant I. Find cos(a − b).

Show the steps and the answer
xyθx = −20y = 21rP(−20, 21)Ox = −20 (20 left) y = 21 (21 up) r = 29the ray from O through P (and beyond) = the terminal side
a's point is left of the y-axis, so its x is −20 and cos a = −2029.
  1. Say what it asks: one value of each angle is given; find the cosine of the angle a−b.The cosine difference formula, cos(a − b) = cos a cos b + sin a sin b, needs cos a and sin b, and both are missing.
  2. For a: y=21 and r=29, so x2=292−212=841−441=400, and x is 20 or −20.The right triangle with legs x and y and slanted side r; both 20 and −20 square to 400.
  3. a is in Quadrant II, left of the y-axis, so x=−20 and cosa=−2029. Plug back in: (−20)2+212=400+441=841=292.In Quadrant II every x is negative, so cosine is negative there. This sign is the gotcha of this rung.
  4. For b: x=4 and r=5, so y2=25−16=9,y=3, and sinb=35.Quadrant I keeps y positive.
  5. cos(a−b)=cosacosb+sinasinb=(−2029)(45)+(2129)(35).The cosine difference formula, with plus in the middle.
  6. =−80145+63145=−17145.20 · 4 = 80, made negative by the one negative factor; 21 · 3 = 63; 29 · 5 = 145. Then −80 + 63 = −17. 17 does not divide 145 = 5 · 29, so the fraction is finished.
Answer
cos(a−b)=−17145
Double-check Second way, by estimating the angles. sin 46° ≈ 0.719 is close to 2129 ≈ 0.724, so a ≈ 180° − 46° = 134°. cos 37° ≈ 0.799 is close to 45 = 0.8, so b ≈ 37°. Then a − b ≈ 97°, a little past 90°, where cosine is slightly negative: cos 97° ≈ −0.122, close to −17145 ≈ −0.117 (the small gap comes from rounding the angles to whole degrees). Had cos a lost its minus sign, the answer would have been 143145 ≈ 0.986, nowhere near.

10.7 Reading a formula backwards

Open the full lesson

The rule

sinxcosy−cosxsiny=sin(x−y), for every pair of angles x and y.

Every other sum formula and difference formula can be read from right to left in the same way, the tangent ones wherever they are defined; the table lists all six.

How

  1. Name the two functions in each product. A sine times a cosine in both products points to a sine formula. A cosine times a cosine in one product and a sine times a sine in the other point to a cosine formula. A fraction of tangents points to a tangent formula.
  2. Check that the same two angles appear in both products, that each angle switches function from one product to the other, and that no number multiplies only one product. If any check fails, stop: no formula packs it.
  3. Choose between x + y and x − y with Sine Same, Cosine Changes: a sine pattern keeps the sign between the products as the sign between the angles, a cosine pattern switches it, and a tangent fraction keeps it on top and switches it on the bottom.
  4. For a difference, put first the angle whose sine, or tangent, comes before the minus sign. With cosine the order does not matter.
  5. Work out the one angle, giving fractions with π a common bottom, then evaluate its sine, cosine or tangent, or keep the shorter expression when the angle holds a letter.
  6. Check the answer a second way: a calculator decimal of the whole long side, or a test angle put into both the start and the answer.

Worked example

Worked example

Packing sin 83° cos 23° − cos 83° sin 23°

Find the exact value of sin 83° cos 23° − cos 83° sin 23°.

Show the steps and the answer

sin83°cos23°−cos83°sin23°

sinxcosy−cosxsiny

x = 83°, y = 23°

=sin(83°−23°)=sin60°=32

30°60°√31245°45°11√2
In the 30-60-90 triangle the side opposite 60° is 3 and the hypotenuse is 2, so sin 60° = 32.
  1. Say what the question asks: one number for the whole expression, written exactly with fractions and roots, not as a rounded decimal.An exact value is the number itself, such as 32. A decimal such as 0.866 is only close to it.
  2. Name the functions in each product: sin83°cos23° is a sine times a cosine, and cos83°sin23° is a cosine times a sine.When each product holds one sine and one cosine, only a sine formula can have produced it.
  3. Check the angles: both products use 83° and 23°, and no number stands in front of either product.The formula packs only when the same two angles fill both products.
  4. The sign between the products is minus, so the pattern is sinxcosy−cosxsiny=sin(x−y).Sine Same: in a sine formula the sign between the products is the sign between the angles.
  5. x=83° and y=23°.x is the angle whose sine sits in the product before the minus sign, and that product is sin 83° cos 23°.
  6. Pack it: sin83°cos23°−cos83°sin23°=sin(83°−23°)=sin60°.The two sides of the difference formula are the same number, so the long side may be traded for the short one.
  7. sin60°=32.60° is a special angle: in the 30-60-90 triangle with hypotenuse 2, the side opposite 60° is 3, and opposite over hypotenuse is 32.
Answer
32
Double-check Type the whole left side into a calculator in degree mode as one line: sin(83) × cos(23) − cos(83) × sin(23) gives 0.8660254 (rounded). Then 3 ÷ 2 gives 0.8660254 as well. The two agree, and the calculator never used the formula.

The trap

Taking the angles in the order they are printed. In a sine difference, the first angle is the one whose sine sits in the product before the minus sign, wherever that sine is written. So cos 20° sin 65° − sin 20° cos 65° is sin(65° − 20°) = 22, not sin(20° − 65°). The wrong order gives the negative of the right answer, because sin(−45°) = −sin 45°. Before you subtract, find the sine in the product before the minus sign and put its angle first.

Quick check

Try it before you open its steps. It is question 4 of 8 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 8

A tangent fraction

Find the exact value of tan33°+tan12°1−tan33°tan12°.

Show the steps and the answer

top: tan 33° + tan 12°, the same sign as the angles

bottom: 1 − tan 33° tan 12°, the sign switched

= tan(33° + 12°) = tan 45° = 1

  1. Say what it asks: one exact number for the whole fraction.tan 33° and tan 12° are not special values, but the fraction may pack into one tangent that is.
  2. Two tangents on top with a plus, and 1 minus the product of the same two tangents on the bottom.That is the shape of tanx+tany1−tanxtany = tan(x + y).
  3. Check the signs: plus on top, minus on the bottom.The top keeps the sign of the angles, as sine does, and the bottom switches it, as cosine does. Matching signs on top and bottom would not pack.
  4. Pack it: tan(33°+12°)=tan45°.The tangent sum formula read from right to left.
  5. tan45°=1.In the 45-45-90 triangle the opposite and adjacent sides are equal, so opposite over adjacent is 1.
Answer
1
Double-check With a calculator in degree mode, the top is tan 33° + tan 12° ≈ 0.861964 and the bottom is 1 − tan 33° tan 12° ≈ 0.861964 (both rounded). Top and bottom are the same number, so the fraction is 1.

11 Double-angle and half-angle formulas

7 lessonsOpen the unit's crash course

11.1 The double-angle formulas from the sum formulas

Open the full lesson

The rule

For every angle t: sin2t=2sintcost and cos2t=cos2t−sin2 t.

For every angle t whose tangent exists, with tant≠1 and tant≠−1: tan2t=2tant1−tan2t.

How

  1. Say in plain words what is asked: "find sin 2t" means "find the sine of the angle twice as big as t", not "double the sine of t".
  2. List what the formula needs, with signs: sin t and cos t for sin 2t and cos 2t; tan t for tan 2t, where tan t = sintcost.
  3. Write the formula, then put each value in parentheses where its name was.
  4. Work in order: squares first, then products, then the subtraction; for tan 2t, finish the top and the bottom before you divide.
  5. Check a second way: (sin 2t)2 + (cos 2t)2 must be 1, and tan 2t must equal sin2tcos2t.

Worked example

Worked example

All three formulas with a negative cosine

An angle t has sin t = 2029 and cos t = −2129. Find sin 2t, cos 2t and tan 2t, and say which quadrant 2t ends in.

Show the steps and the answer
xyθx = −21y = 20rP(−21, 20)Ox = −21 (21 left) y = 20 (20 up) r = 29the ray from O through P (and beyond) = the terminal side
P = (−21, 20) lies 29 from the origin, so this angle has sin = 2029 and cos = −2129: it ends in quadrant II.
QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
Sine negative with cosine positive happens only in quadrant IV, so that is where 2t ends.
  1. Say what is asked: the sine, cosine and tangent of the angle twice as big as t, from the two values given, and then where that doubled angle ends.sin 2t means sin(2t): the 2 belongs to the angle, so we use the formulas, not 2 · sin t.
  2. Note the signs: sin t is positive and cos t is negative, so t ends in quadrant II.Quadrant II is the one where sine is positive and cosine is negative. Keeping each sign attached prevents slips later.
  3. sin2t=2·2029·(−2129).sin 2t = 2 sin t cos t, with each value in parentheses so its sign comes along.
  4. Multiply: sin2t=−2·20·2129·29=−840841.Multiply the tops and the bottoms: 2 · 20 · 21 = 840 and 29 · 29 = 841. One negative factor makes the product negative.
  5. cos2t=(−2129)2−(2029)2=441841−400841.cos 2t = cos2 t − sin2 t, cosine first. A negative squared is positive: 212 = 441, 202 = 400, 292 = 841.
  6. Subtract: cos2t=41841.The bottoms match, so subtract the tops: 441 − 400 = 41.
  7. tant=2029÷(−2129)=2029·(−2921)=−2021.tan t = sintcost. Dividing by a fraction is multiplying by its flip, and the 29s cancel.
  8. Top of the tangent formula: 2tant=2·(−2021)=−4021.Doubling a fraction doubles its top.
  9. Bottom: 1−tan2t=1−400441=441441−400441=41441.(−2021)2 = 400441, and writing 1 as 441441 gives both fractions the same bottom.
  10. Divide: tan2t=−4021÷41441=−4021·44141=−40·2141=−84041.Multiply by the flip. 441 ÷ 21 = 21, so the 21 on the bottom cancels into 441 and leaves 21 on top; 40 · 21 = 840.
  11. sin 2t is negative and cos 2t is positive, so 2t ends in quadrant IV.Quadrant IV is the one where sine is negative and cosine is positive.
Answer
  • sin2t=−840841
  • cos2t=41841
  • tan2t=−84041
  • 2t ends in quadrant IV
Double-check Two checks. First, tan 2t = sin2tcos2t = −840841 ÷ 41841 = −840841 · 84141 = −84041, the same as the tangent formula gave. Second, every point on the unit circle is 1 from the center, so by the Pythagorean theorem (sin 2t)2 + (cos 2t)2 must be 1: (−840841)2 + (41841)2 = 705600+1681707281 = 707281707281 = 1, since 8412 = 707281.

The trap

Reading sin 2t as 2 sin t. The 2 sits inside the sine, on the angle, so it doubles the turn, not the answer, and doubling the turn does not double the height: sin 30° = 12, but sin 60° = 32 ≈ 0.87 (rounded), not 1. To avoid it, say "sine of two t" out loud and reach for 2 sin t cos t, which needs the cosine too. The same goes for cos 2t and tan 2t.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

Reading sin 2t from right to left

Find the exact value of 4 sin 15° cos 15°.

Show the steps and the answer

2 sin t cos t = sin 2t

4 sin 15° cos 15° = 2 · (2 sin 15° cos 15°)

=2·sin30°=2·12=1

  1. Say what is asked: one exact number, with no rounding. 15° is not an angle of a special triangle, so we cannot plug in known values.That tells us to look for a formula that turns the product into a value we know.
  2. Split the 4 as 2·2: 4sin15°cos15°=2·(2sin15°cos15°).2 · 2 = 4, and the part in parentheses now has the exact shape 2 sin t cos t, with t = 15°.
  3. Read sin2t=2sintcost from right to left: 2sin15°cos15°=sin(2·15°)=sin30°.An equation says both sides are the same number, so it can be read in either direction.
  4. sin30°=12, so 4sin15°cos15°=2·12=1.sin 30° comes from the 30-60-90 triangle, and the leftover 2 from the split multiplies it.
Answer
4 sin 15° cos 15° = 1
Double-check With a calculator in degree mode, sin 15° ≈ 0.2588 and cos 15° ≈ 0.9659 (both rounded), and 4 · 0.2588 · 0.9659 ≈ 0.9999, which is 1 up to the rounding.

11.2 The three forms of cos 2t and when to use each

Open the full lesson

The rule

For every angle t, cos2t=cos2t−sin2t=2cos2t−1=1−2sin2t.

Know cos t only: use 2cos2t−1. Know sin t only: use 1−2sin2t. Know both: use cos2t−sin2t.

How

  1. Say what you have and what you want: the problem gives cos t, sin t, or both, and wants cos 2t, the cosine of the angle twice as big.
  2. Pick the form that uses only what you have: cos t alone, the cosine form 2cos2t − 1; sin t alone, the sine form 1 − 2sin2t; both, the first form cos2t − sin2t.
  3. Put the known value in parentheses and square it: square the top and the bottom, and a minus sign disappears.
  4. Double, then subtract, in the order the form shows. Write 1 as a fraction with the same bottom before you subtract.
  5. Check: the answer must be between −1 and 1. Then find the missing square from sin2t + cos2t = 1, work a second form, and compare.

Worked example

Worked example

Cos 2t from the sine alone

You know sin t = −23. Find cos 2t exactly.

Show the steps and the answer
4/95/9
sin2t = 49 and cos2t = 59 fill one whole between them, so knowing one square gives the other.
  1. Say what the question asks: we have the sine of an angle t and want the cosine of the angle twice as big, 2t.Naming what we have and what we want tells us which form fits.
  2. Pick the sine form, cos2t=1−2sin2t.sin t is the only trig value in it, and sin t is what we know. We never need cos t, so we never need to know where t is.
  3. Square the sine, keeping the minus sign inside parentheses: sin2t=(−23)2=49.Square the top and the bottom: (−2) · (−2) = 4 and 3 · 3 = 9. A negative times a negative is positive.
  4. Double it: 2·49=89.Multiplying a fraction by a whole number multiplies its top: 2 · 4 = 8.
  5. Take it from 1: 1−89=99−89=19.Writing 1 as 99 gives both fractions the same bottom; then subtract the tops, 9 − 8 = 1.
Answer
cos2t=19
Double-check Second way: sin2t + cos2t = 1 gives cos2t = 1 − 49 = 59 (and 59 + 49 = 99 = 1, as it must). The first form gives cos2t − sin2t = 59 − 49 = 19. Same answer, with no sign of cos t needed, and 19 is between −1 and 1, as a cosine must be.

The trap

Putting the value into the wrong form. With sin t = 13, writing 2 · (13)2 − 1 = −79 uses the cosine form for a sine value; the sine form gives 1 − 2 · 19 = 79. The two answers differ only in sign, so the slip is hard to spot. Before you substitute, check that the letter in the form, sin or cos, matches the letter of the value you know, and try the form at t = 0: a true form gives 1.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Rung 4, a root inside: the sine has a square root

You know sin t = 34. Find cos 2t.

Show the steps and the answer
  1. Say what it asks: we have sin t and want cos 2t.The sine is the only value we know.
  2. Pick the sine form, cos2t=1−2sin2t.sin t is the only trig value in it.
  3. Square: (34)2=316.Squaring undoes a square root, so (3)2 = 3, and 42 = 16.
  4. Double and reduce: 2·316=616=38.Twice 3 is 6; then divide the top and the bottom by 2.
  5. Take from 1: 88−38=58.1 = 88, and 8 − 3 = 5.
Answer
cos2t=58
Double-check Second way: cos2t = 1 − 316 = 1316 (and 1316 + 316 = 1). The first form gives 1316 − 316 = 1016 = 58. Same answer. As a decimal, 58 = 0.625, between −1 and 1.

11.3 Finding sin 2t and cos 2t from one value and a quadrant

Open the full lesson

The rule

The reference triangle joins the center, a point (x, y) on the terminal side of t and the point (x, 0) on the x-axis: its legs, the two sides at the square corner, are |x| and |y| long, its long side is r, x2+y2=r2 and r > 0.

The given value is a ratio, so take the two of x, y and r it names from its top and bottom (sint=513: y=5,r=13); x2+y2=r2 gives the size of the third, and the quadrant the signs of x and y; then sint=yr and cost=xr go into sin2t=2sintcost and cos2t=cos2t−sin2 t (or 2cos2t−1, or 1−2sin2 t).

How

  1. Say what is given (one value of t and where t ends) and what is asked (sin 2t, cos 2t, or both).
  2. Turn the given value into two sides of the reference triangle with sin t = yr, cos t = xr or tan t = yx. Put any minus sign on x or y, never on r.
  3. Find the third side from x2 + y2 = r2. For r keep the positive root; for a leg keep both roots for a moment.
  4. Let the quadrant choose the leg's sign: x is negative left of the y-axis (Quadrants II and III), and y is negative below the x-axis (Quadrants III and IV). Plug the leg back into x2 + y2 = r2 to confirm it.
  5. Write sin t and cos t as signed fractions.
  6. Substitute into sin 2t = 2 sin t cos t and a form of cos 2t, then simplify.
  7. Check with a second form of cos 2t, with (sin 2t)2 + (cos 2t)2 = 1, and with the sign of sin 2t.

Worked example

Worked example

Sine given, angle in Quadrant II

sin t = 513, and t ends in Quadrant II. Find sin 2t and cos 2t.

Show the steps and the answer

sin t = 513, Quadrant II

y=5,r=13,x=−12

cost=−1213

sin2t=2·513·(−1213)=−120169

cos2t=144169−25169=119169

  1. Say what the question asks. It gives one value, sint=513, and says t ends in Quadrant II, up and to the left of the center. It asks for sin 2t and cos 2t, the sine and cosine of the angle twice as big as t.Naming the goal first keeps you from stopping at cos t, which is only a stepping stone.
  2. Write the two formulas you will fill in: sin2t=2sintcost and cos2t=cos2t−sin2 t.Both need sin t and cos t. You have sin t, so the missing piece is cos t.
  3. Read two sides from sint=yr=513: the height y=5 and the distance r=13.Sine is the height over the distance from the center. A positive height fits Quadrant II, which lies above the x-axis.
  4. Find x: x2+52=132, so x2+25=169, so x2=144, and x=12 or x=−12.This step finds x, the sideways distance, which is the side cosine needs. The Pythagorean theorem ties the three sides together, and two numbers square to 144, so keep both for a moment.
  5. Keep x = −12. Plug it back: (−12)2+52=144+25=169=132.Quadrant II lies left of the y-axis, where every x is negative. The plug-in shows that −12 fits the triangle.
  6. cost=xr=−1213.Cosine is the sideways distance over r, and the minus sign came from the quadrant.
  7. sin2t=2·513·(−1213)=−120169.Multiply the tops, 2 · 5 · 12 = 120, and the bottoms, 13 · 13 = 169. One negative factor makes the product negative.
  8. cos2t=(−1213)2−(513)2=144169−25169=119169.Squaring −1213 gives the positive 144169; then subtract the tops over the same bottom: 144 − 25 = 119.
Answer
  • sin2t=−120169
  • cos2t=119169
Double-check Second way for cos 2t: the form 1 − 2 sin2 t uses only the given value, and 1 − 2 · 25169 = 169169 − 50169 = 119169, the same. For sin 2t: the answers must satisfy (sin 2t)2 + (cos 2t)2 = 1, and 1202 + 1192 = 14400 + 14161 = 28561 = 1692, so they do. The sign fits as well: take t between 90° and 180° (a full turn on t is two full turns on 2t, so the choice does not move 2t), and 2t is between 180° and 360°, below the x-axis, where sine is negative.

The trap

The most common mistake is giving the new leg the wrong sign, nearly always by keeping the positive root without looking at the quadrant. x2 = 144 gives 12 and −12, and only the quadrant chooses between them. The wrong sign is hard to spot: cos 2t comes out the same, because it uses only squares, and (sin 2t)2 + (cos 2t)2 = 1 still holds, yet sin 2t has the wrong sign. Sketch the point before you compute, and test sin 2t against the pattern: positive for t in Quadrant I or III, negative for t in Quadrant II or IV.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

Tangent given, and both legs negative

tan t = 43, and t is in Quadrant III. Find sin 2t and cos 2t.

Show the steps and the answer
xyθx = −3y = −4rP(−3, −4)Ox = −3 (3 left) y = −4 (4 down) r = 5the ray from O through P (and beyond) = the terminal side
Both legs of the point (−3, −4) point the negative way, yet r = 5 is a positive length.
  1. Say what the question asks: you have tan t, t ends down and to the left, and you want sin 2t and cos 2t.Neither sin t nor cos t is given, so the triangle must supply both.
  2. Write tant=yx=−4−3, so y=−4 and x=−3.In Quadrant III the point is left of the y-axis and below the x-axis, so both legs are negative, and a negative over a negative is the positive 43.
  3. Find r: r2=(−3)2+(−4)2=9+16=25, so r=5.This finds the distance from the center to the point. A distance is positive, so only the root 5 counts, and 52 = 25 confirms it.
  4. sint=yr=−45 and cost=xr=−35.Each leg keeps its own minus sign, and r stays positive.
  5. sin2t=2·(−45)·(−35)=2425.Two negative factors make a positive product: 2 · 4 · 3 = 24 over 5 · 5 = 25.
  6. cos2t=(−35)2−(−45)2=925−1625=−725.Both squares are positive; then 9 − 16 = −7.
Answer
  • sin2t=2425
  • cos2t=−725
Double-check Second form: 1 − 2 sin2 t = 1 − 2 · 1625 = 2525 − 3225 = −725, the same. Sign of sin 2t: take t between 180° and 270°, since a full turn on t is two full turns on 2t and does not move it; then 2t is between 360° and 540°, one full turn plus 0° to 180°, above the x-axis, where sine is positive. Sizes: 242 + 72 = 576 + 49 = 625 = 252.

11.4 The power-reducing formulas

Open the full lesson

The rule

sin2t=1−cos2t2 and cos2t=1+cos2t2, for every angle t.

Dividing the first by the second gives tan2t=1−cos2t1+cos2t, wherever cos2t≠−1.

How

  1. Find the square, sin2 or cos2 of some angle, and read the whole angle inside it: in cos2 3t the angle is 3t.
  2. Choose the formula by the name: a sine squared takes the minus, sin2 A = 1−cos2A2; a cosine squared takes the plus, cos2 A = 1+cos2A2.
  3. Double the whole angle for the new cosine: 3t becomes 6t, and 75° becomes 150°.
  4. Keep the bottom 2, and multiply any number in front through: 6 · 1−cos2t2 = 3(1 − cos 2t) = 3 − 3 cos 2t.
  5. If a new square shows up, such as cos2 2t, use the cosine formula again with the angle doubled again: cos2 2t = 1+cos4t2.
  6. Check: put a special angle such as t = 30° into the start and into the finish; the two numbers must match.

Worked example

Worked example

Rewriting 6 sin2 t as a plain wave

Write 6 sin2 t with no square, then say how low and how high its graph goes.

amplitude 3π/2π246
The wave 3 − 3 cos 2t, which equals 6 sin2 t, has midline 3 and swings 3 above and below it, from 0 up to 6.
Show the steps and the answer
  1. Say what is asked: find an expression equal to 6 sin2 t at every angle, with no sine or cosine squared, and then read the lowest and highest values of its graph.Trading a square for a plain cosine is what a power-reducing formula does, and a plain cosine wave is one you can read.
  2. Replace sin2 t: 6 sin2t=6·1−cos2t2.The square is a sine, so it takes the minus form (Sine Subtracts), and the angle t doubles to 2t.
  3. 6·1−cos2t2=3(1−cos2t).6 divided by the bottom 2 is 3.
  4. 3(1−cos2t)=3−3cos2t.The 3 multiplies each term inside the brackets.
  5. Read the wave: when cos2t=1 it is 3−3=0, and when cos2t=−1 it is 3+3=6. Halfway between, the midline (middle height) is 3.cos 2t never goes below −1 or above 1, so these are the lowest and highest values.
Answer
  • 6sin2t=3−3cos2t
  • Its graph is a cosine wave flipped upside down, with midline 3, running from 0 up to 6.
Double-check Second way, plug in t = 30°: 6 sin2 30° = 6 · 14 = 32, and 3 − 3 cos 60° = 3 − 32 = 32. Same number. The heights agree too: sin2 t runs from 0 to 1, so 6 sin2 t runs from 0 to 6.

The trap

Forgetting to double the angle. The cosine on the right always carries twice the angle of the square on the left: sin2 t goes with cos 2t, cos2 3t with cos 6t, sin2 40° with cos 80°. Writing 1−cost2 for sin2 t gives 12 at t = 90°, where sin2 90° is 1. Before moving on, point at the angle in the square, double it, and make sure that double is what you wrote.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

An exact value, cos2 75°

Find cos2 75° exactly.

Show the steps and the answer
x = cos θy = sin θP
At 150° the point sits left of the y-axis at x = −32, so cos 150° is negative.
  1. Say what is asked: find the exact number cos275°, with no decimals.75° is not a special angle, so there is no table value to square, but its double, 150°, has a known cosine.
  2. cos275°=1+cos150°2.A cosine squared takes the plus form, and 75° doubles to 150°.
  3. cos150°=−32.150° lies in Quadrant II, where cosine is negative, and its reference angle is 180° − 150° = 30°, with cos 30° = 32.
  4. 1+cos150°=1−32=22−32=2−32.Adding a negative is subtracting, and writing 1 as 22 gives both pieces the same bottom.
  5. Divide by 2: 2−32÷2=2−34.Dividing a fraction by 2 doubles its bottom.
Answer
cos2 75° = 2−34 (about 0.067, rounded)
Double-check Second way, the partner formula: sin2 75° = 1−cos150°2, and 1 − cos 150° = 1 + 32 = 2+32, so sin2 75° = 2+34. Then 2−34 + 2+34 = 44 = 1, as sin2 75° + cos2 75° must be. A calculator agrees: cos 75° ≈ 0.2588 and 0.25882 ≈ 0.0670, while (2 − 1.7321) ÷ 4 ≈ 0.0670 (both rounded).

11.5 The half-angle formulas and the sign of the answer

Open the full lesson

The rule

sint2=±1−cost2; cost2=±1+cost2; tant2=±1−cost1+cost=sint1+cost=1−costsintIn each ± form, keep the one sign the function has in the quadrant where t2 lies, not where t lies.

The two tangent fractions carry their own sign, and each holds where its bottom is not 0.

How

  1. Get cos t. Every half-angle formula needs the cosine of the whole angle.
  2. Divide the bounds on t by 2 to find where t2 lies, and read the sign there.
  3. Put cos t into 1 − cos t (for sine) or 1 + cos t (for cosine), then divide by 2.
  4. Take the square root of the top and the bottom, and rationalize if a root is left in the bottom.
  5. Replace ± with the one sign from step 2.
  6. For tangent, divide your sine by your cosine, or use sint1+cost.
  7. Check that sin2 t2 + cos2 t2 = 1.

Worked example

Worked example

All three half-angle values from cos t = −725

cos t = −725 and π < t < 3π2. Find the exact values of sin t2, cos t2 and tan t2.

Show the steps and the answer
tterminal sideinitial side
t ends in Quadrant III, between 180° and 270°.
t/2terminal sideinitial side
Half of the turn ends in Quadrant II, between 90° and 135°.
x = cos θy = sin θ(−3/5, 4/5)
The halfway point: its x leg, cos t2 = −35, points left, and its y leg, sin t2 = 45, points up.
  1. Say what it asks: you know the cosine of a whole angle t and the stretch where t lies. You want the sine, cosine and tangent of half of t.The input is cos t, which is exactly what the half-angle formulas take.
  2. Halve the bounds: π<t<3π2 becomes π2<t2<3π4.Dividing every part by 2 halves the angle, and 2 is positive, so the < signs stay. The sign depends on t2, so its bounds are the ones we need.
  3. Name the quadrant and the signs: π2 to 3π4 is 90° to 135°, Quadrant II. There sine is positive, cosine is negative and tangent is negative.All Students Take Calculus: in Quadrant II only sine is positive. t itself is in Quadrant III, where sine is negative, but that is t's sign, not the half angle's.
  4. Sine, inside the root: 1−cost=1−(−725)=1+725=3225, and 3225÷2=1625.The sine formula takes 1 − cos t and halves it. Subtracting a negative adds it, and dividing by 2 doubles the bottom: 3250 reduces to 1625.
  5. Sine, root and sign: sint2=+1625=45.16 = 4 and 25 = 5, and step 3 says sine is positive here.
  6. Cosine, inside the root: 1+cost=1+(−725)=1825, and 1825÷2=925.The cosine formula takes 1 + cos t and halves it. Adding a negative subtracts it, 2525 − 725 = 1825, and 1850 reduces to 925.
  7. Cosine, root and sign: cost2=−925=−35.9 = 3 and 25 = 5, and step 3 says cosine is negative here.
  8. Tangent: tant2=45÷(−35)=45×(−53)=−43.Tangent is sine divided by cosine. Dividing by a fraction is multiplying by its flip, and a positive divided by a negative is negative, matching tangent's sign in Quadrant II.
Answer
  • sint2=45
  • cost2=−35
  • tant2=−43
Double-check Find sin t a second way, from the reference triangle: adjacent 7, hypotenuse 25, so the opposite side is 625−49 = 576 = 24, and sine is negative in Quadrant III, so sin t = −2425. The sign-free tangent then gives tan t2 = sint1+cost = (−2425) ÷ 1825 = −2418 = −43, a match. The double-angle formulas with t2 as the angle rebuild t's values: cos2 t2 − sin2 t2 = 925 − 1625 = −725 = cos t, and 2 · 45 · (−35) = −2425 = sin t.

The trap

Taking the sign from the quadrant of t instead of t2. With cos t = −725 and π < t < 3π2, t is in Quadrant III, where sine is negative, so it is tempting to write sin t2 = −45. But the formula gives the sine of t2, which lies between π2 and 3π4, in Quadrant II, where sine is positive: sin t2 = 45. Halve the bounds and name the quadrant of t2 before any arithmetic.

Quick check

Try it before you open its steps. It is question 3 of 5 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 5

T's cosine is negative, the half angle's is not

cos t = −725 and π2 < t < π. Find sin t2 and cos t2.

Show the steps and the answer
t/2terminal sideinitial side
Half of t lands between 45° and 90°, in Quadrant I, where sine and cosine are both positive.
  1. Say what it asks: cos t is −725, t is in Quadrant II, and you want the sine and cosine of half of t.Both half-angle formulas take cos t as their input.
  2. Halve the bounds: π4<t2<π2, which is 45° to 90°, Quadrant I. Both answers are positive.In Quadrant I everything is positive. Here is the gotcha: t is in Quadrant II, where cosine is negative, but the half angle is not, so cos t2 is positive.
  3. Sine inside: 1−(−725)=3225, and 3225÷2=3250=1625.Subtracting a negative adds it: 2525 + 725 = 3225; dividing by 2 doubles the bottom, then reduce.
  4. Sine root: sint2=1625=45.16 = 4 and 25 = 5; no root is left in the bottom.
  5. Cosine inside: 1+(−725)=1825, and 1825÷2=1850=925.Adding a negative subtracts it: 2525 − 725 = 1825; then halve and reduce.
  6. Cosine root: cost2=925=35.9 = 3 and 25 = 5.
Answer
  • sint2=45
  • cost2=35
Double-check Use the squares before the roots: sin2 t2 = 1625 and cos2 t2 = 925. They add to 2525 = 1, and cos2 t2 − sin2 t2 = 925 − 1625 = −725 = cos t, as the double-angle formula requires.

11.6 Exact values such as sin 22.5 degrees and cos 105 degrees

Open the full lesson

The rule

For an angle θ whose double t=2θ is a special angle:sinθ=±1−cost2 and cosθ=±1+cost2, with the sign that sinθ or cosθ has in the quadrant of θ itself, not of t.

How

  1. Double the angle you want, θ, to get t = 2θ. Check that t is a special angle, a multiple of 30° or 45°. If t is more than 360°, take away 360° only to look up its cosine.
  2. Choose the sign from the quadrant of θ itself, not of t, and write it down before any arithmetic.
  3. Look up cos t exactly: find the reference angle, take the value from the special triangle, and give it the sign of t's quadrant.
  4. Put cos t into the form: sin θ uses 1−cost2 and cos θ uses 1+cost2.
  5. Simplify: write 1 as 22 and combine, divide by 2 by doubling the bottom to 4, then take 4 = 2 out of the bottom. The top keeps its root, so the answer is a nested radical, a root with another root inside, such as 2−22. Put the sign in front.
  6. Check: compare decimals with a calculator, or run the answer back through a double-angle formula or a sum formula.

Worked example

Worked example

Sin 22.5° from its double, 45°

Find the exact value of sin 22.5°.

Show the steps and the answer
x = cos θy = sin θP
The point at 22.5° is in quadrant I, above the horizontal axis, so its height, sin 22.5°, is positive.
  1. Say what it asks: the height (y) of the point at 22.5° on the unit circle, written with roots instead of a rounded decimal.Sine is the y of the point, and exact means no rounding.
  2. Double the angle: 2×22.5°=45°. So 22.5°=45°2, and t=45°.22.5° is not a special angle, but 45° is, and the half-angle formula needs only the cosine of the double.
  3. Choose the sign now: 0°<22.5°<90°, so the point is in quadrant I, above the horizontal axis. The sign is +.The sign belongs to 22.5°, the angle we want, and in quadrant I every value is positive.
  4. Look up cos45°=22.The 45-45-90 triangle has sides 1, 1 and 2, so cos 45° = 12 = 22, and 45° is in quadrant I, so the value is positive.
  5. Use the sine form and put the value in: sin22.5°=+1−cos45°2, and its top is 1−22.We want a sine, and the sine form is the one with 1 − cos t.
  6. Write 1 as 22 and combine: 22−22=2−22.Fractions with the same bottom combine by combining their tops.
  7. Divide by 2: 2−22÷2=2−24.Dividing a fraction by 2 doubles its bottom.
  8. Take the root of the top and of the bottom: 2−24=2−24=2−22.The root of a fraction is the root of the top over the root of the bottom, and 4 = 2. The top's root stays whole, because a root does not split across a minus.
  9. Put the sign chosen earlier in front: sin22.5°=+2−22.The root gave the size; the quadrant gave the direction, and here it is plus.
Answer
  • sin 22.5° = 2−22 (exact)
  • sin 22.5° ≈ 0.3827 (rounded to four places)
Double-check Run the answer back through the double-angle formula cos 2t = 1 − 2 sin2 t with t = 22.5°. Squaring a root gives back what is inside, and 22 = 4, so sin2 22.5° = 2−24. Then 1 − 2 × 2−24 = 1 − 2−22 = 2−(2−2)2 = 22, which is cos 45°, as it must be. A calculator agrees too: sin 22.5° ≈ 0.3827, and 2−1.4142 ÷ 2 = 0.5858 ÷ 2 ≈ 0.7654 ÷ 2 ≈ 0.3827.

The trap

Taking the sign from the doubled angle instead of the angle you want. For cos 67.5°, the double, 135°, is in quadrant II, where cosine is negative, so a minus in front is tempting. But the question is about 67.5°, which is in quadrant I, where every value is positive: cos 67.5° = +2−22. The negative cos 135° belongs inside the root, not in front. To avoid the mistake, sketch the angle you want before any arithmetic, decide its sign, and write that sign in front of the root right away.

Quick check

Try it before you open its steps. It is question 4 of 7 in the full lesson, where they run from easy to exam-hard.

Try it · level 4 of 7

Taking away a negative, and a misleading double (sin 112.5°)

Find the exact value of sin 112.5°.

Show the steps and the answer
x = cos θy = sin θP
The point at 112.5° is above the horizontal axis, so its height, sin 112.5°, is positive.
  1. Say what it asks: the height (y) of the point at 112.5°, written exactly.Sine is the y of the point on the unit circle.
  2. Double: 2×112.5°=225°, so t=225°.225° is a special angle (reference angle 45°).
  3. Sign first: 90°<112.5°<180°, so 112.5° is in quadrant II, above the horizontal axis. The sign is +.Sine is positive in quadrant II. The double, 225°, is in quadrant III, where sine is negative, but 225° is not the angle we want.
  4. Look up cos225°=−22.225° is in quadrant III with reference angle 225° − 180° = 45°, and x is negative there.
  5. Sine form: 1−cos225°=1−(−22)=1+22=2+22.Taking away a negative adds, and 1 = 22.
  6. Divide by 2: 2+24. Take the root and put + in front: sin112.5°=2+22.Dividing by 2 doubles the bottom, 4 = 2, and the sign is the one chosen above.
Answer
  • sin112.5°=2+22
  • sin 112.5° ≈ 0.9239 (rounded)
Double-check A second route, the sum formula for sine: 112.5° = 90° + 22.5°, so sin 112.5° = sin 90° cos 22.5° + cos 90° sin 22.5° = 1 · cos 22.5° + 0 · sin 22.5° = cos 22.5°. The cosine form gives cos 22.5° = 1+cos45°2 = 2+24 = 2+22, the same. A calculator gives sin 112.5° ≈ 0.9239.

11.7 Equations with a double angle

Open the full lesson

The rule

If A·B=0, then A=0 or B=0 (the zero-product property).

To solve an equation with a double angle for 0≤t<2π: rewrite the double angle so only t appears, move every term to one side so the other side is 0, factor, and set each factor equal to 0. Never divide both sides by sin t or cos t, which can be 0.
The pattern: sin2t=sint becomes 2sintcost−sint=0, then sin t (2cost−1)=0, so sint=0 or cost=12.

How

  1. Say what the question asks: every angle t with 0 ≤ t < 2π that makes the two sides equal.
  2. Rewrite the double angle so only t appears: sin 2t = 2 sin t cos t. For cos 2t, use 1 − 2sin2t when the rest of the equation is in sine and 2cos2t − 1 when it is in cosine.
  3. Move every term to one side by adding or subtracting, so the other side is 0. Never divide by anything that contains t.
  4. Factor: pull out the piece every term shares, or factor the quadratic.
  5. Set each factor equal to 0, and solve each small equation on the unit circle with the table in this lesson.
  6. Collect every angle from every factor, once each and in order around the circle, then check each one in the original equation.

Worked example

Worked example

Four answers from sin 2t = 2 sin t

Solve sin 2t = 2 sin t for every t with 0 ≤ t < 2π.

Show the steps and the answer
2 sin t cos t−√2 sin tsin t2 cos t−√2
The shared piece sin t runs down the side.
0π/4π7π/4π/2π3π/22π−11
The solid y = sin 2t and the dashed y = 2 sin t cross at the four answers.
  1. Say what the question asks: find every angle t in one lap, from 0 up to but not including 2π, at which sin 2t and 2sint are equal.The answer is a list of angles, so you keep going after the first one you find.
  2. Rewrite the left side with the double-angle formula: 2sintcost=2sint.The left side used the angle 2t and the right side the angle t. Now both use t alone, and the unit circle can answer questions about t.
  3. Subtract 2sint from both sides: 2sintcost−2sint=0.Subtracting the same thing from both sides keeps them equal, and the 0 on the right is what lets you split the left side two steps from now. Dividing both sides by sin t instead would delete the angles where sin t = 0.
  4. Factor out the piece both terms share, sin t: sin t (2cost−2)=0.Both terms contain sin t. Multiplying back, sin t · 2 cos t − sin t · 2 = 2 sin t cos t − 2 sin t, which is the line above, as the area picture shows.
  5. Split into two small equations: sint=0 or 2cost−2=0.If two numbers multiply to 0, one of them is 0. Each small equation finds the angles that make one factor zero, and that makes the whole left side zero.
  6. Solve sint=0: the height on the unit circle is 0 only on the horizontal axis, at t=0 and t=π.Those are the right and left ends of the axis (the table's first row), and 2π is left out by the < sign; it names the same point of the circle as 0. Plug back in: at t = π the left side is sin π · (2 cos π − 2) = 0 · (−2 − 2) = 0.
  7. Solve 2cost−2=0: add 2 to both sides, then divide both sides by 2, to get cost=22.Adding undoes the subtracting, and dividing undoes the multiplying by 2. Dividing by 2 is safe, because 2 is never 0.
  8. Find the angles: cosπ4=22, so the reference angle is α=π4. The value is positive, so t is in Quadrant I or IV: t=π4 or t=2π−π4=8π4−π4=7π4.Cosine, the x coordinate, is positive on the right half of the circle, and an angle in Quadrant IV with reference angle α is 2π − α (the table's row for cos t between 0 and 1). Plug back in: 2 cos π4 − 2 = 2 · 22 − 2 = 2 − 2 = 0.
  9. Collect every angle from both factors, in order around the circle: 0, π4,π,7π4.Each of the four makes one factor zero, so each makes the equation true. Dropping a factor's list would drop answers.
Answer
  • t = 0 (0°)
  • t=π4(45°)
  • t = π (180°)
  • t=7π4(315°)
Double-check Plug each answer into the original equation. At t = 0: sin 0 = 0 and 2 sin 0 = 0. At t = π4: sin π2 = 1 and 2 · 22 = 22 = 1. At t = π: sin 2π = 0 and 2 sin π = 0. At t = 7π4: 2t = 7π2, one full lap past 3π2, so sin 7π2 = sin 3π2 = −1, and 2 · (−22) = −1. The graph agrees: y = sin 2t and y = 2 sin t cross exactly four times in one lap, at these four angles.

The trap

Dividing both sides by sin t (or cos t) to make the equation shorter. It looks harmless, but wherever sin t = 0 that is a division by 0, and those angles are answers: dividing sin 2t = sin t by sin t loses t = 0 and t = π. Subtract instead, factor sin t out, and give sin t = 0 its own small equation.

Quick check

Try it before you open its steps. It is question 3 of 6 in the full lesson, where they run from easy to exam-hard.

Try it · level 3 of 6

The shared piece is cos t

Solve sin 2t = 3 cos t for every t with 0 ≤ t < 2π.

Show the steps and the answer
x = cos θy = sin θP
At π3, which is 60°, the height of the point, sin t, is 32.
x = cos θy = sin θP
Its mirror image across the vertical axis, at 2π3, which is 120°, has the same height.
  1. Say what it asks: find every angle in one lap at which sin 2t equals 3cost.Here the piece every term will share is cos t, not sin t, so watch which function appears in both terms.
  2. Rewrite with the double-angle formula: 2sintcost=3cost.Both sides now use the angle t alone.
  3. Subtract 3cost from both sides: 2sintcost−3cost=0.This puts 0 on one side. Dividing by cos t instead would lose the angles where cos t = 0.
  4. Factor out cos t: cos t (2sint−3)=0.Both terms contain cos t. Multiplying back gives 2 sin t cos t − 3 cos t, the line above.
  5. Split: cost=0 or 2sint−3=0.If two numbers multiply to 0, one of them is 0, so each small equation finds the angles that make one factor zero.
  6. Solve cost=0: t=π2 or t=3π2.The x coordinate is 0 only at the top and the bottom of the circle (the table's row for cos t = 0). Plug back in: cos π2 = 0 and cos 3π2 = 0, so the product is 0 at both.
  7. Solve 2sint−3=0: add 3, then divide by 2, to get sint=32.Adding undoes the subtracting, and dividing undoes the multiplying by 2. Dividing by 2 is safe, because 2 is never 0.
  8. Find the angles: sinπ3=32, so the reference angle is α=π3. The value is positive, so t is in Quadrant I or II: t=π3 or t=π−π3=3π3−π3=2π3.Sine, the height, is positive on the top half of the circle, and an angle in Quadrant II with reference angle α is π − α (the table's row for sin t between 0 and 1). Plug back in: 2 sin 2π3 − 3 = 2 · 32 − 3 = 0.
  9. Collect all four, in order: π3,π2,2π3,3π2.Each makes one of the two factors zero, and each angle is listed once.
Answer
  • t=π3(60°)
  • t=π2(90°)
  • t=2π3(120°)
  • t=3π2(270°)
Double-check Plug each answer into the original equation. At t = π3: sin 2π3 = 32 and 3 · cos π3 = 3 · 12 = 32. At t = 2π3: sin 4π3 = −32 and 3 · cos 2π3 = 3 · (−12) = −32. At t = π2: sin π = 0 and 3 · 0 = 0. At t = 3π2: sin 3π = 0, since 3π is a full lap plus π, and 3 · 0 = 0.