Quarry School

Trigonometry: study guide

about 27 min to listen11 units93 lessonsevery crash course: about 2 h 25 min

The units in study order. For each: what it asks, every rule, every trap, and its crash course.

1 Angles and their measure

crash course: about 11 min10 lessons14 questions to tryOpen the crash course

What it asks. You will learn to describe a turn, choose its sign and tell where it finishes. Degrees divide a full turn into equal pieces, while radians measure curved distance using the circle's radius as a ruler. You will practice changing between those two units and finding different turns that finish on the same ray. Then you will use an angle to find distance along a circle and the area of a circular slice. The worked steps and ladders show how to rebuild the rules and check your answers before the closed-book exam.

Rule The pieces of an angle and how to name them

A line has no endpoints, a line segment has two, and a ray has one.

In ray OP, O is the endpoint. In ∠AOB, O is the vertex; ∠BOA names the same geometric corner.

Trap The pieces of an angle and how to name them

Naming the angle ∠OAB. Its middle letter is A, so that name asks for a corner at A. Point to the hinge first, then put its letter in the middle.

Rule An angle records a turn and its direction

Positive angle: counterclockwise rotation.

Negative angle: clockwise rotation. The sign depends only on the direction of the turn, regardless of the initial side.

Trap An angle records a turn and its direction

Calling an angle negative because its terminal side points downward. You can turn counterclockwise through 300° and end downward. The arrow's direction gives the sign; the final location does not.

Rule Coterminal angles: keep the landing, change the journey

An integer n counts complete laps and may be positive, negative, or zero.

360°n means 360°×n.
In degrees, all angles coterminal with θ have measures θ+360°n, where n is any integer. For a one-turn representative use 0°≤θ<360°: an angle that ends on the initial ray, such as 360° or −720°, has one-turn representative 0°.

Trap Coterminal angles: keep the landing, change the journey

Subtracting 180° to make an angle smaller. A half turn points in the opposite direction. Use a whole 360° turn when you must keep the same terminal side.

Rule A common start makes the landing place meaningful

Coordinates (x, y) give the horizontal position first and vertical position second; (0, 0) records zero in both directions.

Standard position means vertex at (0, 0) and initial side on the positive x-axis. The Roman numerals I, II, III, IV mean 1, 2, 3, 4 and name the regions upper right, upper left, lower left, lower right, in counterclockwise order. A quadrantal angle ends on an axis.

Trap A common start makes the landing place meaningful

Saying an angle of 90° is in Quadrant I. The upper-right region ends before its boundary. Exactly 90° is on the positive y-axis.

Rule Angle sizes and two ways to fill a corner

Acute: 0°<θ<90°.

Right: θ=90°. Obtuse: 90°<θ<180°. Straight: θ=180°. Positive complements sum to 90°; positive supplements sum to 180°.

Trap Angle sizes and two ways to fill a corner

Interchanging complement and supplement. Remember C comes before S: Complement fills the smaller 90° corner; Supplement fills the larger 180° corner.

Rule Degrees, minutes and seconds: smaller pieces of a turn

1°=60′=3600″ and 1′=60″.

Decimal degrees =D+M60+S3600. For subtraction: 90°=89°59′60″ and 180°=179°59′60″.Here D, M, and S count degrees, minutes, and seconds, respectively.

Trap Degrees, minutes and seconds: smaller pieces of a turn

Treating DMS as decimal digits. 6′ is 660° = 0.1°, not 0.06°. Borrow and carry in groups of 60, not 100.

Rule Radians count radius-lengths of curved distance

For a nonnegative central opening, θ=sr radians, where s is the chosen arc length and r > 0 is the radius; signed turns use the direction rule.

180°=π radians; a full revolution is 360°=2π radians.

Trap Radians count radius-lengths of curved distance

Reading 30 and 30° as the same angle. In the instructor's angle notation, a number without a degree sign is in radians. Write ° whenever the measurement is in degrees, and say radians when a bare number could be unclear.

Rule Convert the unit, then locate a radian angle

Degrees → radians: multiply by πradians180°.

Radians → degrees: multiply by 180°πradians.Radian coterminal angles are θ+2πn, where n is any integer; reduce to 0≤θ<2π before locating the terminal side.

Trap Convert the unit, then locate a radian angle

Using a rounded boundary such as 1.57 as though it were exactly π2. An angle of 1.57 radians is slightly below the exact axis value. Use exact π boundaries for exact angles, and use the decimals only when the angle lies clearly between them.

Rule Arc length: how far you travel around the rim

s=rθ; θ=sr; r=sθ when θ>0.

θ must be in radians.
For one physical slice, r > 0 and 0≤θ≤2π; arc length is a nonnegative size, also called its magnitude.

Trap Arc length: how far you travel around the rim

Putting 75 directly into s = rθ when the opening is 75°. The formula counts radius-lengths, so θ must be 5π12 radians. Write the conversion before substituting, and keep the answer in a length unit rather than degrees.

Rule Sector area: how much of the disk you keep

A=12r2θ, with θ in radians; for degrees use A=θ360°πr2.

For one physical slice, r > 0 and 0≤θ≤2π in radians; sector area is a nonnegative size, also called its magnitude.

Trap Sector area: how much of the disk you keep

Using r instead of r2, or reporting area in centimeters. Write the radius multiplication explicitly, such as 72 = 7 × 7 = 49, and give square units. The angle must also be in radians for A = 12r2θ.

2 Trigonometric functions

crash course: about 35 min10 lessons17 questions to tryOpen the crash course

What it asks. You first name the sides of a right triangle and turn their lengths into six functions of an acute angle. Identities connect those functions and help you recover missing values, rebuild special-angle values and verify equations. Signed coordinates extend the same definitions to every angle, including axes and all four quadrants. The unit circle turns any real number into an angle input, and matching calculator mode gives decimal approximations.

Rule Right triangles and the names of their sides

For an acute angle θ of a right triangle: hyp faces the 90° corner; opp is the leg facing θ; adj is the leg touching θ.

The hypotenuse is excluded when naming adj.
The two acute angles add to 90°.

Trap Right triangles and the names of their sides

Calling the hypotenuse the adjacent side. The hypotenuse also touches θ, but it is never called adjacent. Name the hypotenuse first, set it aside, and only then decide which of the two legs touches θ.

Rule The six trig functions of an acute angle

For an acute angle in a right triangle: sinθ=opphyp,cosθ=adjhyp,tanθ=oppadj.

cscθ=hypopp,secθ=hypadj,cotθ=adjopp.

Trap The six trig functions of an acute angle

Naming sides by where they sit on the page. Figures put the angle in different corners, so the leg on the left is not always adjacent. Always name the sides from the angle's point of view.

Rule The fundamental identities

sin2θ+cos2θ=1 for every angle.

tanθ=sinθcosθ and secθ=1cosθ require cosθ≠0; cotθ=cosθsinθ and cscθ=1sinθ require sinθ≠0.
Where both reciprocal expressions exist, cotθ=1tanθ. tan2θ+1=sec2θ requires cosθ≠0; cot2θ+1=csc2θ requires sinθ≠0.

Trap The fundamental identities

Reading sin2θ as sin(θ2). sin2θ means (sin θ)2: find sine first, then square its value. Also, sin2θ + cos2θ = 1 relates squares; sin θ + cos θ is usually not 1. With sine 35 and cosine 45, the ordinary sum is 75.

Rule The special angles: 30°, 45° and 60°

45°,45°,90°: sides 1, 1, 2.

30°,60°,90°: the side across from 30° is 1, across from 60° is 3, across from 90° is 2. sin30°=12,sin45°=22,sin60°=32; the cosines are the same list in reverse order. For an angle that makes full turns and then ends on an acute ray, we define its trig values to be those of that acute direction; this extends the triangle definition using the terminal side.

Trap The special angles: 30°, 45° and 60°

Swapping the 30° and 60° values. The shortest side, 1, faces the smallest angle, 30°, so sin 30° = 12 is the small sine and sin 60° = 32 (about 0.866) is the large one. From 0° to 90°, sine grows as the angle grows.

Rule Using the identities: rewrite and prove

For an acute angle, cosθ=1−sin2θ and tanθ=sinθ1−sin2θ.

An identity holds on its common domain. Use sinθ≠0 when dividing by sinθ and cosθ≠0 when dividing by cosθ.

Trap Using the identities: rewrite and prove

Testing one angle and calling the identity proved. One angle can agree by coincidence; a proof needs algebra that works for every θ. Use a test angle only to check your algebra afterward.

Rule Definition 2: a point on the terminal side

r=x2+y2>0.

sinθ=yr,cosθ=xr,tanθ=yx (x≠0), cotθ=xy (y≠0), secθ=rx (x≠0), cscθ=ry (y≠0).

Trap Definition 2: a point on the terminal side

Giving r a sign. r is a distance, so it is positive even when x and y are negative. Every minus sign in the answers comes from x or y, never from r.

Rule Quadrantal angles and undefined values

sinθ=y and cosθ=x at the axis points with r=1.

tanθ and secθ are undefined at θ=90°+n·180°; cotθ and cscθ are undefined at θ=n·180°, where n is any integer (positive, negative or zero). In radians these are π2+nπ and nπ.

Trap Quadrantal angles and undefined values

Writing 0 when the answer is undefined, or the reverse. 01 = 0 is a real value; 10 has no value. Look at which coordinate sits on the bottom before you answer.

Rule Signs by quadrant: find the quadrant first

Inside Quadrants I, II, III, IV, the positive functions are respectively: all six; sin and csc; tan and cot; cos and sec.

Every remaining function is negative.sin2θ+cos2θ=1 gives the missing magnitude. The quadrant chooses the sign of sinθ or cosθ in front of its nonnegative square root.

Trap Signs by quadrant: find the quadrant first

Taking the positive square root out of habit. The principal square root, written a, is nonnegative, including 0 = 0. A missing sine or cosine can still be negative: choose its sign from the quadrant. When a sign clue leaves two possible quadrants, keep both instead of guessing.

Rule Definition 3: the unit circle

x2+y2=1 and P(t)=(cost,sint).

tant=yx and sect=1x require x≠0; cott=xy and csct=1y require y≠0.P(t±π)=(−x,−y); P(−t)=(x,−y); P(t+2nπ)=(x,y), where n is any integer.

Trap Definition 3: the unit circle

Swapping x and y. The point is P(t) = (cos t, sin t): cosine comes first, as x does. Alphabetical order helps: c before s, x before y.

Rule Calculator values: DEG or RAD mode

Use DEG for degrees and RAD for radians.

Here an angle with no unit means radians.secθ=1cosθ requires cosθ≠0; cscθ=1sinθ and cotθ=cosθsinθ require sinθ≠0. Round only the final value, retaining requested trailing zeros.

Trap Calculator values: DEG or RAD mode

Leaving the calculator in the wrong mode. Before any calculator question, look for a degree sign and set the mode. Quick test: sin 30 should show 0.5 in DEG mode.

3 Properties of the trigonometric functions

crash course: about 30 min10 lessons16 questions to tryOpen the crash course

What it asks. Picture yourself riding a Ferris wheel of radius 1: your height above its center and your position to its right or left tell you two numbers.

Rule Sine and cosine: every input works, and the output stays between −1 and 1

For sin t and cos t: domain (−∞,∞), all real numbers; range [−1,1].

Thus −1≤sint≤1 and −1≤cost≤1. Absolute value |a| means a number's distance from 0, so the notes' |sint|≤1 and |cost|≤1 say the same thing.

Trap Sine and cosine: every input works, and the output stays between −1 and 1

Mixing up the two questions. The domain is about the input t, and every t is allowed for sine and cosine. The range is about the output, which must be between −1 and 1. The input t = 5 is fine for sine; the output 5 is impossible.

Rule Quadrantal angles: where tan, cot, sec and csc break

tan t and sec t: t≠π2+nπ, or t≠90°+n·180°.

cot t and csc t: t≠nπ, or t≠n·180°. An integer is a number such as −2,−1, 0, 1 or 2; n may be any integer. The notes write the same exclusions as π2±nπ and ±nπ. Every other real input is allowed.

Trap Quadrantal angles: where tan, cot, sec and csc break

Calling a 0 on top 'undefined'. 0−1 = 0 is an ordinary value. Only a 0 on the bottom breaks a function, so tan π = 0 is defined while cot π is undefined.

Rule The range of tan, cot, sec and csc

tan t and cot t have range (−∞,∞).

sec t and csc t have range (−∞,−1]∪[1,∞), meaning an output ≤−1 or ≥1. To test a proposed secant or cosecant output v, first require v≠0, then check that 1v belongs to [−1,1].

Trap The range of tan, cot, sec and csc

Writing the range of sec t or csc t as [−1, 1]. That is the range of their partners cos t and sin t. Flipping pushes every value outside: (−∞, −1] ∪ [1, ∞).

Rule Periodic functions: the values repeat every lap

A positive repeat k preserves the domain in both directions and satisfies f(t+k)=f(t) wherever defined.

A function with such a repeat is periodic. If there is a smallest positive repeat, it is the period. For any integer n: sin(t±2nπ)=sint, and the same for cos, sec and csc; tan(t±nπ)=tant, and the same for cot. Degree repeats are 360° and 180°, respectively. In degrees, sint=sin(t±n·360°), with integer n; likewise cos, sec and csc.

Trap Periodic functions: the values repeat every lap

Removing a single π from a sine, cosine, secant or cosecant angle. Half a lap flips their sign: sin(t + π) = −sin t, so sin 210° is −12, not sin 30° = 12. Only tangent and cotangent may drop π at a time; the others must drop 2π (360°).

Rule Signs of the six functions in the four quadrants

Inside a quadrant: I has all six positive.

II has sin and csc positive. III has tan and cot positive. IV has cos and sec positive. Each unlisted function is negative. Axis points need their actual coordinates, because a value may be 0 or undefined.

Trap Signs of the six functions in the four quadrants

A reciprocal keeps its partner's sign. csc follows sin, sec follows cos, and cot follows tan wherever both exist. Remember that the All Students Take Calculus cue excludes axis points.

Rule Which quadrant is the angle in?

I: 0<t<π2.

II: π2<t<π. III: π<t<3π2. IV: 3π2<t<2π. Reduce to 0≤t<2π, or 0°≤θ<360°. A multiple of π2 or 90° lies on an axis, not in a quadrant.

Trap Which quadrant is the angle in?

A plain number such as t = 4 means 4 radians, about 229°, rather than 4°. Also, 1.57 is a rounded landmark, rather than exactly π2. A number close to a rounded landmark needs more digits before you choose a quadrant.

Rule Increasing and decreasing: where sine and cosine rise and fall

On a chosen interval, increasing means x2>x1 gives f(x2)>f(x1); decreasing means x2>x1 gives f(x2)<f(x1).

On [0,2π], sin increases on [0,π2] and [3π2,2π], and decreases on [π2,3π2]. cos decreases on [0,π] and increases on [π,2π].

Trap Increasing and decreasing: where sine and cosine rise and fall

Decreasing does not mean negative. In II, sine decreases while staying positive. In IV, sine increases while staying negative. Also, reducing two angles by different numbers of turns can change their order, so compare their reduced inputs before using a direction rule.

Rule Even and odd: what a minus sign inside does

An even or odd function has a domain that contains −t whenever it contains t.

For every t in that domain, even means f(−t)=f(t), and odd means f(−t)=−f(t). Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd. Even graphs are symmetric about the y-axis, meaning the two sides match when folded across that axis. Odd graphs are symmetric about the origin, meaning a half turn around the origin leaves the graph unchanged.

Trap Even and odd: what a minus sign inside does

Moving a minus sign outside cosine or secant changes the answer incorrectly. Even functions preserve the positive-input output's sign. Odd functions reverse that output's sign; if the positive-input output is already negative, the result is positive.

Rule Combining properties to find signs and known exact values

Handle the input's minus sign, remove whole periods, identify a quadrant or an axis, then use a known exact value or a suitable identity.

For an unfamiliar angle, the properties can determine a sign or a smaller equivalent expression without determining a special exact value.

Trap Combining properties to find signs and known exact values

Losing the outside sign while reducing the input changes the expression. Carry it through every equality. Also check axis points before attempting a reciprocal: an undefined value cannot be fixed by moving a negative sign.

Rule All six functions from one value and a quadrant

sin2θ+cos2θ=1.

Thus cosθ=±1−sin2θ and sinθ=±1−cos2θ, with the sign chosen by the quadrant. Then tanθ=sinθcosθ,cotθ=cosθsinθ,secθ=1cosθ,cscθ=1sinθ, wherever the denominator is nonzero.

Trap All six functions from one value and a quadrant

Taking the sign from the square root. 1625 = 45 is positive, but in Quadrant IV sine is negative, so sin θ = −45. The quadrant decides the sign, never the square root.

4 Graphs of sine and cosine

8 lessons16 questions to tryOpen the crash course

What it asks. You will build the sine graph from a turning circle, then see how two numbers change its height and width. You will learn why amplitude measures height and why period measures the horizontal distance needed for a repeat. Next you will connect cofunctions and build the cosine graph, which has the same wave shape with a different starting place. Finally you will sketch complete cycles and read a graph to write its equation, using the instructor's examples and fresh practice problems.

Rule 1. Turn a circle's height into the sine graph

For y=sinx: Domain is all real numbers; Range is [−1,1]; the graph is Continuous.

Period (T)=2π; sin(x+2kπ)=sinx for any Integer k; sin(−x)=−sinx.

Trap 1. Turn a circle's height into the sine graph

Do not turn the exact radian input π2 into a degree input of π2°. It means a quarter turn, or 90°. The decimal 1.57 is only a rounded label for that exact input.

Rule 2. A changes height: amplitude, stretch, compression, reflection

For y=Asinx: Amplitude =|A|=maximum−minimum2; Midline is y=0; Range is [−|A|,|A|].

|A| > 1 stretches vertically; 0 < |A| < 1 compresses vertically; A < 0 reflects across the x-axis. For A≠0,T=2π.

Trap 2. A changes height: amplitude, stretch, compression, reflection

A = −3 is a signed coefficient, but Amplitude = |−3| = 3 is a distance. The minus sign describes reflection, not a negative amplitude. The unshifted Midline is y = 0, the x-axis; x = 0 is a vertical line.

Rule 3. Omega changes width: derive the period

For y=Asin(ωx), with A≠0 and ω≠0: T=2π|ω| and |ω|=2πT.

|ω|>1 compresses horizontally; 0<|ω|<1 stretches horizontally; ω<0 reverses the input direction. A=0 or ω=0 gives a constant graph without a smallest positive period.

Trap 3. Omega changes width: derive the period

The inside multiplier is not the period. For sin(2x), ω = 2 but T = π. Divide 2π by |ω|. A negative ω also gives a positive period because width is a distance, not a direction.

Rule 4. Read A and omega before doing arithmetic

For y=Asin(ωx), with A≠0 and ω≠0, amplitude =|A| and T=2π|ω|.

A is outside sine; ω multiplies x inside sine.

Trap 4. Read A and omega before doing arithmetic

Using the outside number as period, or treating π as decoration inside sine. Copy A and the entire ω before applying their separate formulas.

Rule 5. Cofunctions: change the partner and subtract the angle

Wherever both sides are defined: sinx=cos(π2−x),cosx=sin(π2−x),tanx=cot(π2−x),cotx=tan(π2−x),secx=csc(π2−x), and cscx=sec(π2−x).

For degree angles, replace π2 with 90° throughout.

Trap 5. Cofunctions: change the partner and subtract the angle

Changing the function name but keeping the old angle, or subtracting radians from 90°. Change name and argument, using one angle unit throughout.

Rule 6. Cosine starts at the top and shares the same wave shape

y=cosx has domain (−∞,∞), range [−1,1], period 2π, and cos(−x)=cosx.

It begins at (0, 1). Also cosx=sin(x+π2), a shift of sine π2 left. For Acos(ωx), amplitude =|A| and T=2π|ω| when A≠0 and ω≠0.

Trap 6. Cosine starts at the top and shares the same wave shape

Starting cosine at the origin, or confusing cos(−x) with −cos x. Cosine starts at (0, 1). Changing its input sign leaves output unchanged, while an outside minus reflects its heights.

Rule 7. Sketch a complete cycle with five key points

For A≠0 and ω>0,y=Asin(ωx) or y=Acos(ωx) has T=2πω.

Use the input columns 0, T4,T2,3T4, T in the key-point picture. Multiply the parent heights by A, connect smoothly, and repeat every T.

Trap 7. Sketch a complete cycle with five key points

Drawing straight segments between the key points makes a zigzag. These points locate a smooth sinusoidal function, so round the turns and cross the middle smoothly.

Rule 8. Read a wave and write its equation

For nonconstant y=Asin(ωx) or y=Acos(ωx), centered at y=0 with ω>0, amplitude a=maximum−minimum2 and ω=2πT.

At x=0: middle up chooses a sin; middle down chooses −asin; top chooses a cos; bottom chooses −acos.

Trap 8. Read a wave and write its equation

The four-start method assumes an unshifted wave centered at y = 0 and a positive ω. A wave with another midline or an arbitrary horizontal shift needs the later transformation method.

5 Graphs of the other four functions

crash course: about 27 min9 lessons14 questions to tryOpen the crash course

What it asks. You will first find which angle inputs each of the four functions accepts and which output heights it can produce. Then you will use symmetry and period to recognize repeated pieces of the graphs. Tangent will show you why division by a number near zero creates a vertical asymptote, and cotangent will use the same reasoning with a different denominator. Finally, you will build cosecant from sine and secant from cosine, then practice sketching and checking all four without a calculator.

Rule Four formulas and the inputs they must skip

tanx=sinxcosx; cotx=cosxsinx; secx=1cosx; cscx=1sinx.

For tan and sec, require x≠π2+nπ; for cot and csc, require x≠nπ, with n any integer.

Trap Four formulas and the inputs they must skip

A zero on the top is not a break. Check the bottom first: 01 = 0, while 10 is undefined.

Rule Range: the output heights each graph can reach

tan x and cot x have range (−∞,∞).

sec x and csc x have range (−∞,−1]∪[1,∞), meaning y≤−1 or y≥1.

Trap Range: the output heights each graph can reach

Excluding ±1 along with the middle band. The gap is open: −1 < y < 1. At the edges, reciprocal values are still ±1.

Rule Even and odd: how the picture balances

sec(−x)=secx is even, with y-axis symmetry.

tan(−x)=−tanx,cot(−x)=−cotx and csc(−x)=−cscx are odd, with origin symmetry. In each identity, x and −x must both be allowed inputs.

Trap Even and odd: how the picture balances

Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.

Rule Period: copy the right-sized piece

tan(x+π)=tanx and cot(x+π)=cotx.

sec(x+2π)=secx and csc(x+2π)=cscx. Their fundamental periods are π,π,2π and 2π respectively.

Trap Period: copy the right-sized piece

Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.

Rule Tangent and the meaning of a vertical asymptote

tanx=sinxcosx, with x≠π2+nπ for every integer n.

The vertical asymptotes are x=π2+nπ.Each branch is continuous and increasing; the central branch is on (−π2,π2) and the pattern repeats every π.

Trap Tangent and the meaning of a vertical asymptote

Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.

Rule Cotangent: the branch that falls

cotx=cosxsinx, with x≠nπ for every integer n.

Its vertical asymptotes are x=nπ and its period is π.
On (0,π), the continuous decreasing branch passes through (π4,1),(π2,0), and (3π4,−1).

Trap Cotangent: the branch that falls

Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at π2 that gives the valid output 0.

Rule Cosecant: build a reciprocal graph from sine

cscx=1sinx, with x≠nπ for every integer n.

Its vertical asymptotes are x=nπ, its range is (−∞,−1]∪[1,∞), its period is 2π, and csc(−x)=−cscx.

Trap Cosecant: build a reciprocal graph from sine

taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.

Rule Secant: build a reciprocal graph from cosine

secx=1cosx, with x≠π2+nπ for every integer n.

Its vertical asymptotes are x=π2+nπ, its range is (−∞,−1]∪[1,∞), its period is 2π, and sec(−x)=secx.

Trap Secant: build a reciprocal graph from cosine

secant uses cosine zeros, which lie at odd multiples of π2. Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.

Rule Read, sketch and remember all four graphs

for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote.

Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.

Trap Read, sketch and remember all four graphs

Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.

6 Sinusoidal functions

crash course: about 12 min9 lessons13 questions to tryOpen the crash course

What it asks. You will learn how four numbers control a sine or cosine wave's height, width, horizontal position and center. You will see why an inside subtraction moves the graph right, then derive the phase shift and period together from one complete inside turn. You will practice reading features even when signs and fractions hide the usual form. Finally, you will rebuild equations from graphs and use the instructor's daylight table to fit and check a seasonal approximation.

Rule A sinusoidal function is a repeating wave

a sine wave is written y=Asin(ωx−φ)+B, and a cosine wave is written y=Acos(ωx−φ)+B.

For a nonconstant wave, A≠0; use ω>0 after rewriting signs. The inside input is in radians. Read ω as omega and φ as phi. A coefficient is a multiplier; ω is the coefficient of x. A parameter is a fixed setting such as A, ω,φ or B. T labels the period and h labels the signed horizontal shift. The subscript max means highest output and min means lowest output.

Trap A sinusoidal function is a repeating wave

Do not call every periodic function sinusoidal. Repeating stair steps repeat too, but they are not sine or cosine waves.

Rule Amplitude measures height, not direction

amplitude =|A|=ymax−ymin2.

It is the distance from the midline to an extreme, not the full height. Negative A reflects the wave vertically.

Trap Amplitude measures height, not direction

Do not report maximum-minus-minimum as the amplitude. It contains two amplitude distances.

Rule Period measures the width of a repeat

for ω>0,T=2πω and ω=2πT.

Use adjacent matching stages of the wave to read T from a graph. T is a positive repeat distance, and h will name a signed horizontal shift.

Trap Period measures the width of a repeat

ω is not the period. It is the multiplier that determines the period.

Rule Phase shift: why minus inside moves right

h=φω, with ω>0.

Factor ωx−φ=ω(x−h). h > 0 moves right; h < 0 moves left; h=0 gives no horizontal shift. We name the signed horizontal slide h.

Trap Phase shift: why minus inside moves right

Do not read the phase shift as φ alone. First translate from inside units to x-units by dividing by ω.

Rule One cycle: solve the inside-input inequality

0≤ωx−φ≤2π gives h≤x≤h+T, where h=φω and T=2πω, provided ω>0.

Trap One cycle: solve the inside-input inequality

Matching endpoint heights alone does not prove a full cycle. A sine wave also has equal heights half a cycle apart, but it then moves in the opposite direction.

Rule Midline, maximum, minimum and range

midline y=B, with B=ymax+ymin2.

Minimum =B−|A|; maximum =B+|A|. Range: [B−|A|,B+|A|].

Trap Midline, maximum, minimum and range

The Domain is the input set; the Range is the output set. A transformed sine or cosine still accepts every real x, while its output heights are bounded.

Rule Read all four features, including unusual signs

rewrite negative inside speed first: cos(−u)=cosu; sin(−u)=−sinu.

Then amplitude |A|, period 2πω, phase shift φω, and midline y=B.

Trap Read all four features, including unusual signs

The chosen cycle start is an upward crossing for positive-A sine and a peak for positive-A cosine. Negative A reverses those starting features.

Rule Build an equation from a graph

A=ymax−ymin2>0,B=ymax+ymin2,ω=2πT,φ=ωh.

Choose h at an upward middle crossing for sine or a peak for cosine.

Trap Build an equation from a graph

A graph alone does not force a unique phase shift. State which sine or cosine start you chose and check that the equation reproduces the pictured stages.

Rule Build and check a daylight model

for a fitted positive-A sine wave, A=Dmax−Dmin2,B=Dmax+Dmin2,ω=2πT,φ=ωh.

Choose h near a rising middle crossing and compare predictions with observations.

Trap Build and check a daylight model

Do not confuse an observed height with a model prediction. The instructor's formula approximates the table and does not exactly place every observed extreme in its recorded month.

7 Inverse trigonometric functions

crash course: about 32 min8 lessons15 questions to tryOpen the crash course

What it asks. This unit runs sine, cosine and tangent backward: you start with a number and look for the angle. Because each trig function repeats, many angles share one value, so the unit first cuts each graph down to a piece that never repeats; the one angle that piece gives for a number is the principal value. With those cuts in place you meet the inverse sine, the inverse cosine and the inverse tangent, and a four-step way to find exact values from the special angles, the sign of the input and the quadrant. Then the functions are put together, one inside another, where they undo each other only under conditions, and inside a right triangle. The unit ends at the calculator, which shows the principal value and never the other answers.

Rule Why a trig function needs its domain cut before it can have an inverse

Horizontal line test: a function has an inverse function exactly when no horizontal line crosses its graph more than once.

A function that passes is called a one-to-one function. Every trig function repeats, so each one fails the test and must be cut first. Sine is cut to the restricted domain [−π2, π2], where sin θ takes every value in [−1, 1] exactly once.

Trap Why a trig function needs its domain cut before it can have an inverse

Cutting sine to [0, π], the top half of the circle, because it looks like a natural half. On [0, π] sine climbs and then falls, so sin(π6) = sin(5π6) = 12 still repeats, and it never reaches a negative height. Sine's piece is the right half of the circle, from the bottom to the top: [−π2, π2]. Say it to yourself: sine climbs the right side.

Rule The inverse sine

y= arcsin x, also written y=sin−1 x, means siny=x and −π2≤y≤π2.

Domain: [−1,1]. Range: [−π2,π2], which is −90° to 90°.

Trap The inverse sine

Answering with an angle outside the range. For arcsin(−12) it is tempting to write 7π6 or 11π6: both have sine −12, but neither lies between −π2 and π2. The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −π6. Before you write any arcsin answer, check that it lies in that stretch.

Rule The inverse cosine

The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0,π].

So y= arccos x, also written y=cos−1 x, means cosy=x and 0≤y≤π.
Domain of arccos: [−1,1]. Range of arccos: [0,π].

Trap The inverse cosine

Answering a negative input with a negative angle, the way the inverse sine does: arccos(−12) = −π3 is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past π2, up to π: here 2π3. Catch the slip by taking the cosine of what you wrote: cos(−π3) = +12, the wrong sign.

Rule The inverse tangent

y= arctan x, also written y=tan−1 x, means tany=x and −π2<y<π2.

Domain: all real numbers, (−∞,∞). Range: (−π2,π2), with both ends left out. Horizontal asymptotes: y=−π2 and y=π2.

Trap The inverse tangent

Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of 3π4, of 7π4 and of −π4, and it is tempting to write the first one that comes to mind. Only the principal value, −π4, lies strictly between −π2 and π2, so arctan(−1) = −π4. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.

Rule Exact values by the sign and the quadrant

Let r be the reference angle: the angle from 0 to π2 whose sine, cosine or tangent (the one being undone) equals the input without its minus sign.

A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π−r for arccos. In symbols: arcsin(−x)=−arcsin x, arctan(−x)=−arctan x, arccos(−x)=π− arccos x. The result is the principal value: the one angle inside the range.

Trap Exact values by the sign and the quadrant

The most common slip here is the right point with the wrong name. For arcsin(−22) many people write 7π4, because the unit circle they learned runs from 0 to 2π. The point is right, but 7π4 is not between −π2 and π2, so it is not the principal value. Name the same point by turning clockwise: −π4. And 5π4, in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.

Rule A function and its inverse undo each other, with conditions

sin(arcsin x) =x for x in [−1,1] (undefined for other x); arcsin(sinx)=x for x in [−π2,π2], and for any other x it is the angle in [−π2,π2] with the same sine.

cos(arccos x) =x for x in [−1,1] (undefined for other x); arccos(cosx)=x for x in [0,π], and for any other x it is the angle in [0,π] with the same cosine.

Trap A function and its inverse undo each other, with conditions

Canceling on sight. arcsin and sine look as if they cross out, so it is tempting to write arcsin(sin(5π6)) = 5π6. Before you cancel, test the angle against the range of the outside inverse. 5π6 is past π2 = 3π6, so it fails; work from the inside instead: sin(5π6) = 12, then arcsin(12) = π6.

Rule Mixing the functions with a right triangle

For an expression such as cos(arcsin a): let θ= arcsin a, the principal value; draw θ in the quadrant that its range and the sign of a allow; label two sides from a, with a minus sign on a leg that points left or down; find the third side from adj2+ opp2= hyp2; then read sinθ=opphyp,cosθ=adjhyp or tanθ=oppadj.

When θ lands on an axis (a=0, or a=1 or −1 for arcsin and arccos) there is no triangle: read the value from the point on the unit circle, for example cos(arcsin 1) =cosπ2=0. For a letter: cos(arcsin x) =1−x2, for −1≤x≤1.

Trap Mixing the functions with a right triangle

Drawing every triangle in Quadrant I. A negative input moves the inside angle: to Quadrant IV for the inverse sine and the inverse tangent, to Quadrant II for the inverse cosine, and one leg turns negative. An input of −1 to the inverse sine or cosine puts the angle on an axis instead, where no triangle forms; read that answer from the unit circle. Skip this and you get the right size with the wrong sign: 125 instead of −125 for tan(arccos(−513)). Decide the quadrant before you draw anything.

Rule Inverse values on a calculator, and why one answer is not all the answers

The sin−1,cos−1 and tan−1 keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin−1 k in [−π2,π2],cos−1 k in [0,π],tan−1 k in (−π2,π2), named in the units the mode is set to.

On [0,2π),sint=k and cost=k have two solutions when −1<k<1, one when k=1 or k=−1, and none when k<−1 or k > 1; tant=k has two for every k. With the reference angle α= the key pressed on |k|, the solutions are the angles among α,π−α,π+α and 2π−α (in degrees α,180°−α,180°+α,360°−α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0,2π) that solves the equation (sint=0 at 0 and π,cost=0 at π2 and 3π2,tant=0 at 0 and π).

Trap Inverse values on a calculator, and why one answer is not all the answers

The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.

8 Trigonometric equations

8 lessons16 questions to tryOpen the crash course

What it asks. An identity, such as sin2 t + cos2 t = 1, is true for every angle; a trigonometric equation such as sin t = 12 is true only for some angles, and solving it means finding every one of them. Because sine and cosine repeat every full turn, a basic equation like that one usually has two answers on one turn, and each solution on one turn comes back once every full turn, forward and backward, so there are infinitely many in all; the general solution writes them in one line. The unit builds one method from the unit circle: find the reference angle, keep the quadrants where the function has the right sign, then add the period any whole number of times. It then stretches that method to equations with a multiple of the angle, equations that factor like a quadratic, equations that need an identity first, values that only a calculator can finish, and equations where squaring both sides lets in an extraneous solution that a check must throw out.

Rule What it means to solve a trigonometric equation

A solution of a trigonometric equation is an angle t that makes it true.

For sint=c with −1<c<1 and c≠0, one turn, 0≤t<2π, holds exactly two solutions, in the two quadrants where sine has the sign of c; and if t is a solution, so is t plus or minus any number of full turns 2π.

Trap What it means to solve a trigonometric equation

Stopping at the first angle you find. When −1 < c < 1 and c ≠ 0, sin t = c has a second solution on one turn, the mirror image across the vertical axis, and every solution comes back after each full turn. Before you finish, ask two questions: did I find both points, and does the question want one turn or more?

Rule Solving sin t = c, cos t = c and tan t = c on one turn

For 0 ≤ t < 2π, when c is not an axis value and the function can reach it: the size of c gives the reference angle α, the table angle whose sine, cosine or tangent has that size; the sign of c gives the two quadrants where that function has that sign; the answers are α in I, π − α in II, π + α in III and 2π − α in IV.

The axis values, 0, 1 and −1 for sine and cosine and 0 for tangent, put the answers on the axes instead, and sine and cosine have no answer when c is above 1 or below −1.

Trap Solving sin t = c, cos t = c and tan t = c on one turn

Stopping at the table. The table gives only the size of c, so answering t = π6 to sin t = −12 loses the sign: sin π6 is +12. After the table, always pick the two quadrants from the sign of c, write an angle in each, and put both answers back into the equation.

Rule Writing every solution with the period

If t=a solves sint=c or cost=c, so does t=a+2kπ for every integer k; if t=a solves tant=c, so does t=a+kπ.

The general solution: each solution on one turn +2kπ for sine and cosine, the one solution in [0,π)+kπ for tangent, where k is any integer.

Trap Writing every solution with the period

Mixing up the two steps. A family of sine or cosine solutions steps by a full turn, + 2kπ; a family of tangent solutions steps by a half turn, + kπ. For cos t = −22, writing 3π4 + kπ would make 7π4 (k = 1) a solution, but cos 7π4 = 22, the wrong sign. Before you write + kπ, ask: is this tangent? The one other case is sin t = 0 or cos t = 0, whose two families sit half a turn apart and may be joined into one with + kπ.

Rule Equations with a multiple of the angle

To solve a trigonometric equation such as sin(nt) =c, cos(nt) =c or tan(nt) =c for 0≤t<2π: the inside angle u= nt runs over 0≤u<2nπ, which is n full turns.

Find every u on that stretch, then divide each one by n. For a positive whole number n, that gives n times as many solutions as the plain equation, such as sint=c, has on one turn.

Trap Equations with a multiple of the angle

Solving for 2t only on the usual one turn, 0 ≤ 2t < 2π, and then dividing by 2. That finds only the answers with t less than π and quietly loses the rest: for sin 2t = 12 it gives t = π12 and 5π12 and misses 13π12 and 17π12. Stretch the interval before you solve, 0 ≤ 2t < 4π, and do all the adding of 2π on 2t before you divide.

Rule Equations that factor like a quadratic

An equation a·sin2t+b·sint+c=0, with a≠0, is a quadratic in sin t: writing u=sint gives au2+ bu +c=0.

Its solutions are the angles t with sint=u, for each answer u of the quadratic with −1≤u≤1; an answer outside [−1,1] gives no angle. Cosine works the same way. For tangent, keep every real answer, since tangent takes every real value.

Trap Equations that factor like a quadratic

Stopping at the values of sin t. Factoring hands you numbers such as sin t = −12 and sin t = 4, not angles. Each number still needs two more steps: throw it out if it is below −1 or above 1, and otherwise turn it into every angle on one turn with that sine (one angle for 1 and −1, two for the others). Only those angles are the answers.

Rule Rewriting with an identity first

sin2t+cos2t=1 at every angle, so sin2t=1−cos2t and cos2t=1−sin2t: replace the squared function and keep the lonely one.

Where cost≠0,sintcost=tant, so sint=cost becomes tant=1, and a·sint=b·cost (a≠0) becomes tant=ba. First test t=π2 and t=3π2 in the original, because a division by cos t would lose them if they were solutions.

Trap Rewriting with an identity first

Dividing both sides by cos t, or by sin t, without testing where it is zero. Division by zero is not allowed, so every solution with cos t = 0, at t = π2 or t = 3π2, disappears without any warning; for sin t the angles are t = 0 and t = π. In 2 sin t cos t = cos t, a division loses π2 and 3π2. Test those angles in the original equation before dividing, and when the function sits in every term, factor it out instead of dividing.

Rule Equations a calculator finishes

To find each solution on one turn [0,2π) of sint=c,cost=c or tant=c when c is not a special value (and −1≤c≤1 for sine and cosine): in radian mode, the inverse key gives α= arcsin c, arccos c or arctan c.

The second solution is π−α for sine, 2π−α for cosine and α+π for tangent. Add 2π to any negative answer. Round only at the end, usually to four decimal places, and write ≈.

Trap Equations a calculator finishes

Stopping at the calculator's answer. The inverse key shows one angle, but sin t = 0.4 has two on one turn. After every key press, ask which other quadrant shares the sign, and find the second angle with π − α, 2π − α or α + π.

Rule Checking for extra solutions after squaring

If a=b, then a2=b2, but a2=b2 only tells you that a=b or a=−b.

So squaring both sides never loses a solution and can add extraneous solutions: keep a candidate only if it makes the original equation true.

Trap Checking for extra solutions after squaring

Writing the candidates as the answer. After squaring sin t + cos t = 1, the list 0, π2, π, 3π2 looks finished, but at t = π the left side is sin π + cos π = 0 + (−1) = −1, not 1, and 3π2 fails the same way. Put every candidate back into the original equation, never the squared one, before you write the answer.

9 Trigonometric identities

7 lessons15 questions to tryOpen the crash course

What it asks. This unit begins by pinning down what an identity is: an equation that holds at every angle where both of its sides make sense, so it is a tool you use rather than a puzzle you solve. It then gathers the basic identities from the unit circle and gives each one its reason: every reciprocal identity and quotient identity, the three forms of the Pythagorean identity, and the facts that cosine is an even function and sine is an odd function. With those in hand, you simplify expressions one named step at a time, and you prove that two expressions are the same by changing one side into the other, sometimes by multiplying by a conjugate. The unit ends with the mistakes that make a proof fall apart and the reason each one fails.

Rule What an identity is and how it differs from an equation

An identity is an equation whose two sides are equal at every angle t where both sides are defined.

One angle where both sides are defined and come out different, called a counterexample, proves a claim is not an identity; no number of angles where the sides agree proves that it is.

Trap What an identity is and how it differs from an equation

Testing one angle, seeing the two sides agree, and calling the claim an identity. Agreement proves nothing: sin t + cos t = 1 agrees at 0° and at 90° and is still false, since at 30° the left side is 1+32 ≈ 1.366, not 1. Use test angles only to disprove; to prove, give a reason that covers every allowed angle.

Rule The reciprocal and quotient identities

Reciprocal identities: csct=1sint,sect=1cost,cott=1tant; flipped back, sint=1csct,cost=1sect,tant=1cott.

Quotient identities: tant=sintcost and cott=costsint.Each holds at every angle where both sides are defined. tan t and sec t are undefined (have no value) where cost=0: t=π2+kπ, which is 90°+k·180°. csc t and cot t are undefined where sint=0: t=kπ, which is k·180°. Here k is any integer: …, −2,−1, 0, 1, 2, …

Trap The reciprocal and quotient identities

Matching by first letter. Secant starts with s like sine, so it is tempting to write sec t = 1sint. It is the other way round: secant is the flip of cosine, and cosecant is the flip of sine. Use the memory device each pair has one co (sine with cosecant, cosine with secant, tangent with cotangent), then test with a number: sec 0° must be 1cos0° = 1, while 1sin0° = 10 has no value.

Rule The Pythagorean identities from the unit circle

sin2t+cos2t=1 for every angle t.

1+tan2t=sec2t for every angle t with cost≠0.1+cot2t=csc2t for every angle t with sint≠0.

Trap The Pythagorean identities from the unit circle

Keeping only the positive square root. A Pythagorean identity gives the size of the missing value, not its sign. With sin t = 35 and t in quadrant II, cos2t = 1 − 925 = 1625, so cos t is 45 or −45; in quadrant II the point sits left of the y-axis, so cos t = −45. After every square root, write both signs and let the quadrant choose.

Rule Even and odd: what a negative angle does

cos(−t)=cost and sin(−t)=−sint for every angle t, and so tan(−t)=−tant wherever cost≠0.

These are identities. A function f is an even function when f(−t)=f(t), and an odd function when f(−t)=−f(t), for every t where f has a value: cosine is even; sine and tangent are odd.

Trap Even and odd: what a negative angle does

The most common slip is pulling the minus out of cosine: writing cos(−t) = −cos t. Only the odd functions (sine, cosecant, tangent, cotangent) carry the minus out in front. Cosine and secant are even and drop it, because the mirror across the x-axis never moves the x. Say cos keeps, sin flips before you write the next line.

Rule Simplifying an expression step by step

Simplify by replacing an expression, one step at a time, with a shorter one that has the same value.

Each step is a named identity (reciprocal identity, quotient identity, Pythagorean identity, or the even function and odd function rules for a negative angle) or an algebra move that keeps the value (common bottom, multiply across, flip and multiply, factor, cancel a shared factor). The result equals the original at every angle where the original is defined.

Trap Simplifying an expression step by step

Canceling a term instead of a factor. You may cross out only a piece that multiplies the entire top and the entire bottom. In cost+sintcost the cos t on top is added to sin t, so it does not cancel; the fraction splits into costcost + sintcost = 1 + tan t. When the piece is in every term on top, factor first and then cancel: cost+sint·costcost = cost(1+sint)cost = 1 + sin t.

Rule Proving an identity by working on one side

To prove an identity in this course, work on one side.

Start with the more complicated side and rewrite it one step at a time, using only facts already known: the reciprocal, quotient and Pythagorean identities, the negative-angle facts, and fraction rules that keep the value (a common denominator, factoring, canceling a common factor, multiplying the top and the bottom by the same expression where it is not 0). Stop when the line reads exactly as the other side: the chain of equal lines proves the identity at every angle where every line is defined, and an angle a step leaves out, where both sides of the claim are defined, is checked on its own.
An argument that instead starts from the claim and does the same thing to both of its sides, such as moving a term (a piece joined to the rest by + or −) across the equals sign, shows only where the claim leads. It becomes a proof once every step is shown to run backwards, with any angle where a step cannot run backwards checked on its own. Working on one side needs no such check, which is why it is the method used here.

Trap Proving an identity by working on one side

The most common mistake is treating the claim like an equation to solve by moving a term across its equals sign, as in turning sec2t − tan2t = 1 into sec2t = 1 + tan2t. That starts from the claim before it is proved, so it shows only where the claim leads, and it is a proof only if every step can be run backwards. Copy one side alone, write = and the next form of that same side, and keep going until it reads exactly as the other side.

Rule The usual mistakes in a proof

A proof of an identity leads from facts already known to the claim.

The method of this course starts from one side alone and changes only that side, one known identity or algebra move at a time, until it becomes the other side.
An argument that starts from the whole claim and does the same thing to both sides shows only where the claim leads. It becomes a proof once every step is shown to walk back, with any angle where a step cannot walk back checked on its own. Squaring both sides walks back only where the two sides are known to have the same sign. Multiplying both sides by an expression does not walk back where that expression is 0, and dividing both sides by it is not possible there.

Trap The usual mistakes in a proof

The most common mistake is writing the claim as the first line and then doing the same thing to both sides until a true line appears. It feels like solving an equation, but it starts from the very thing you are proving, and the same moves can carry a false claim to a true line, so the true line proves the claim only if every step can be walked back. Start from one side alone and turn it into the other.

10 Sum and difference formulas

7 lessons15 questions to tryOpen the crash course

What it asks. This unit opens with a warning you can check with numbers: a trig function does not split over a plus sign, and cos(a + b) is not the same as cos a + cos b. You then find the true rule for cos(a − b) by measuring one chord of the unit circle in two ways, and build every other formula from it: the cosine of a sum, the sine of a sum and of a difference through cofunctions, and the tangent formulas by dividing sine by cosine. Finally the formulas go to work: exact values for angles such as 15° and 75°, the sine, cosine and tangent of a sum or difference when you know only one value of each angle and its quadrant, and long expressions that fold back into a single value when you read a formula backwards.

Rule Why cos(a + b) is not cos a + cos b

cos(a+b)≠cosa+cosb in general: for example, cos(π4+π4)=cosπ2=0, while cosπ4+cosπ4=2.

Sine behaves the same way: sin(a+b)≠sina+sinb in general.

Trap Why cos(a + b) is not cos a + cos b

Splitting the cosine over the plus sign: writing cos(a + b) = cos a + cos b, or its twin cos(2a) = 2 cos a. Avoid it by adding the angles first and taking one cosine of the total, then checking that the answer lies from −1 to 1.

Rule The cosine of a difference, from a distance on the circle

For every pair of angles a and b, in degrees or in radians: cos(a−b)=cosacosb+sinasinb.

Trap The cosine of a difference, from a distance on the circle

Copying the minus sign. The angle inside is a − b, so a minus between the two products feels natural, but the formula has a plus: cos(a − b) = cos a cos b + sin a sin b. Catch it with a = b: the gap is 0° and cos 0° = 1, and only the plus gives cos2a + sin2a = 1.

Rule The cosine of a sum and the sine formulas

For every pair of angles a and b:cos(a+b)=cosacosb−sinasinbsin(a+b)=sinacosb+cosasinbsin(a−b)=sinacosb−cosasinb

Trap The cosine of a sum and the sine formulas

The sign in the cosine formulas. The cosine of a sum has a minus in the middle, and the cosine of a difference has a plus: cosine switches the sign you see inside, while sine keeps it. With a plus, cos(90° + 90°) would come out 0 · 0 + 1 · 1 = 1, but the point at 180° is (−1, 0), so the true value is −1. Write the formula in letters, sign included, before any number goes in, and say cosine switches, sine stays as you write it.

Rule Exact values of angles such as 15 degrees and 75 degrees

If θ=a+b or θ=a−b, where a and b are special angles, the sum formula or the difference formula gives sinθ and cosθ exactly:sin(a+b)=sinacosb+cosasinb and sin(a−b)=sinacosb−cosasinbcos(a+b)=cosacosb−sinasinb and cos(a−b)=cosacosb+sinasinb

Trap Exact values of angles such as 15 degrees and 75 degrees

Getting the sign wrong in the cosine formula. cos 15° = cos(45° − 30°) has a plus in the middle: cos 30° cos 45° + sin 30° sin 45° = 6+24 ≈ 0.9659. Copying the minus from the angles gives 6−24 ≈ 0.2588, which is cos 75°, not cos 15°. Catch it with a size check: a small angle such as 15° has a cosine close to 1, so its cosine must be the larger of the two numbers.

Rule The tangent of a sum or a difference

tan(a+b)=tana+tanb1−tanatanb and tan(a−b)=tana−tanb1+tanatanbBoth need tan a and tan b to exist.

When the bottom is 0, the tangent of the sum or difference is undefined.

Trap The tangent of a sum or a difference

Putting the same sign on the bottom as on top, for example 1 + tan a tan b in the sum formula. The bottom always takes the other sign. Test it with 45° + 45° = 90°, where tangent does not exist: the bottom must come out 0, and only 1 − 1 · 1 does.

Rule Using the formulas from one value of each angle

One value and the quadrant fix the other value of the same angle: cosa=±1−sin2a and sinb=±1−cos2b, each sign chosen by that angle's quadrant.

Then sin(a+b)=sinacosb+cosasinb and cos(a−b)=cosacosb+sinasinb.

Trap Using the formulas from one value of each angle

Dropping the sign of the missing value. The square root gives only the size, as in 225 = 15. Writing cos a = 1517 for an angle in Quadrant II turns the main example's sin(a + b) = 7785 into −1385. Choose the sign from the quadrant in the same step where you take the root, before the value goes anywhere near a formula.

Rule Reading a formula backwards

sinxcosy−cosxsiny=sin(x−y), for every pair of angles x and y.

Every other sum formula and difference formula can be read from right to left in the same way, the tangent ones wherever they are defined; the table lists all six.

Trap Reading a formula backwards

Taking the angles in the order they are printed. In a sine difference, the first angle is the one whose sine sits in the product before the minus sign, wherever that sine is written. So cos 20° sin 65° − sin 20° cos 65° is sin(65° − 20°) = 22, not sin(20° − 65°). The wrong order gives the negative of the right answer, because sin(−45°) = −sin 45°. Before you subtract, find the sine in the product before the minus sign and put its angle first.

11 Double-angle and half-angle formulas

7 lessons15 questions to tryOpen the crash course

What it asks. This unit starts from the sum formulas: set both angles equal and they become the double-angle formulas for sin 2t, cos 2t and tan 2t. Because sin2 t + cos2 t = 1, cos 2t has three forms, and you will learn to pick the one that fits what you already know. Solving those forms for sin2 t and cos2 t gives the power-reducing formulas, which remove squares; putting t2 in place of t and taking a square root then gives the half-angle formulas, whose sign comes from the quadrant of t2. With these you will find exact values such as sin 22.5° and cos 105°, often written as a nested radical, and you will solve equations such as sin 2t = sin t by factoring, never by dividing.

Rule The double-angle formulas from the sum formulas

For every angle t: sin2t=2sintcost and cos2t=cos2t−sin2 t.

For every angle t whose tangent exists, with tant≠1 and tant≠−1: tan2t=2tant1−tan2t.

Trap The double-angle formulas from the sum formulas

Reading sin 2t as 2 sin t. The 2 sits inside the sine, on the angle, so it doubles the turn, not the answer, and doubling the turn does not double the height: sin 30° = 12, but sin 60° = 32 ≈ 0.87 (rounded), not 1. To avoid it, say "sine of two t" out loud and reach for 2 sin t cos t, which needs the cosine too. The same goes for cos 2t and tan 2t.

Rule The three forms of cos 2t and when to use each

For every angle t, cos2t=cos2t−sin2t=2cos2t−1=1−2sin2t.

Know cos t only: use 2cos2t−1. Know sin t only: use 1−2sin2t. Know both: use cos2t−sin2t.

Trap The three forms of cos 2t and when to use each

Putting the value into the wrong form. With sin t = 13, writing 2 · (13)2 − 1 = −79 uses the cosine form for a sine value; the sine form gives 1 − 2 · 19 = 79. The two answers differ only in sign, so the slip is hard to spot. Before you substitute, check that the letter in the form, sin or cos, matches the letter of the value you know, and try the form at t = 0: a true form gives 1.

Rule Finding sin 2t and cos 2t from one value and a quadrant

The reference triangle joins the center, a point (x, y) on the terminal side of t and the point (x, 0) on the x-axis: its legs, the two sides at the square corner, are |x| and |y| long, its long side is r, x2+y2=r2 and r > 0.

The given value is a ratio, so take the two of x, y and r it names from its top and bottom (sint=513: y=5,r=13); x2+y2=r2 gives the size of the third, and the quadrant the signs of x and y; then sint=yr and cost=xr go into sin2t=2sintcost and cos2t=cos2t−sin2 t (or 2cos2t−1, or 1−2sin2 t).

Trap Finding sin 2t and cos 2t from one value and a quadrant

The most common mistake is giving the new leg the wrong sign, nearly always by keeping the positive root without looking at the quadrant. x2 = 144 gives 12 and −12, and only the quadrant chooses between them. The wrong sign is hard to spot: cos 2t comes out the same, because it uses only squares, and (sin 2t)2 + (cos 2t)2 = 1 still holds, yet sin 2t has the wrong sign. Sketch the point before you compute, and test sin 2t against the pattern: positive for t in Quadrant I or III, negative for t in Quadrant II or IV.

Rule The power-reducing formulas

sin2t=1−cos2t2 and cos2t=1+cos2t2, for every angle t.

Dividing the first by the second gives tan2t=1−cos2t1+cos2t, wherever cos2t≠−1.

Trap The power-reducing formulas

Forgetting to double the angle. The cosine on the right always carries twice the angle of the square on the left: sin2 t goes with cos 2t, cos2 3t with cos 6t, sin2 40° with cos 80°. Writing 1−cost2 for sin2 t gives 12 at t = 90°, where sin2 90° is 1. Before moving on, point at the angle in the square, double it, and make sure that double is what you wrote.

Rule The half-angle formulas and the sign of the answer

sint2=±1−cost2; cost2=±1+cost2; tant2=±1−cost1+cost=sint1+cost=1−costsintIn each ± form, keep the one sign the function has in the quadrant where t2 lies, not where t lies.

The two tangent fractions carry their own sign, and each holds where its bottom is not 0.

Trap The half-angle formulas and the sign of the answer

Taking the sign from the quadrant of t instead of t2. With cos t = −725 and π < t < 3π2, t is in Quadrant III, where sine is negative, so it is tempting to write sin t2 = −45. But the formula gives the sine of t2, which lies between π2 and 3π4, in Quadrant II, where sine is positive: sin t2 = 45. Halve the bounds and name the quadrant of t2 before any arithmetic.

Rule Exact values such as sin 22.5 degrees and cos 105 degrees

For an angle θ whose double t=2θ is a special angle:sinθ=±1−cost2 and cosθ=±1+cost2, with the sign that sinθ or cosθ has in the quadrant of θ itself, not of t.

Trap Exact values such as sin 22.5 degrees and cos 105 degrees

Taking the sign from the doubled angle instead of the angle you want. For cos 67.5°, the double, 135°, is in quadrant II, where cosine is negative, so a minus in front is tempting. But the question is about 67.5°, which is in quadrant I, where every value is positive: cos 67.5° = +2−22. The negative cos 135° belongs inside the root, not in front. To avoid the mistake, sketch the angle you want before any arithmetic, decide its sign, and write that sign in front of the root right away.

Rule Equations with a double angle

If A·B=0, then A=0 or B=0 (the zero-product property).

To solve an equation with a double angle for 0≤t<2π: rewrite the double angle so only t appears, move every term to one side so the other side is 0, factor, and set each factor equal to 0. Never divide both sides by sin t or cos t, which can be 0.
The pattern: sin2t=sint becomes 2sintcost−sint=0, then sin t (2cost−1)=0, so sint=0 or cost=12.

Trap Equations with a double angle

Dividing both sides by sin t (or cos t) to make the equation shorter. It looks harmless, but wherever sin t = 0 that is a division by 0, and those angles are answers: dividing sin 2t = sin t by sin t loses t = 0 and t = π. Subtract instead, factor sin t out, and give sin t = 0 its own small equation.