Quarry School

Exact values by the sign and the quadrant

Subject: MathematicsLeans on: Sine, cosine and the unit circleLeans on: Tangent from the pointLeans on: Negative anglesLeans on: Signs by quadrantLeans on: The three rangesLeans on: Allowed inputsLeans on: Inverse notationLeans on: Subtracting from πLeans on: Adding fractionsLeans on: Subtracting a negativeLeans on: Dividing fractionsLeans on: RationalizingLeans on: Radians and degrees
Level 1 · FoundationsAbout 28 min read3 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Finding an exact inverse value is like giving a taxi driver an address in two parts.

    Rule

    Let r be the reference angle: the angle from 0 to π2 whose sine, cosine or tangent (the one being undone) equals the input without its minus sign. A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π − r for arccos. In symbols: arcsin(−x) = −arcsin x, arctan(−x) = −arctan x, arccos(−x) = π − arccos x. The result is the principal value: the one angle inside the range.

    Step

    1. Name the reference angle: cover any minus sign and find the special angle from 0 to π2 whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.

    2. Read the sign of the input: zero, positive or negative.

    3. Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−π2) for arcsin, the left end (π) for arccos.

    4. Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: −π2 for arcsin(−1), π for arccos(−1).

    5. Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.

    Strategy

    1. Name the reference angle. First say what is asked: arcsin x is the angle in [−π2, π2] whose sine is x, arccos x is the angle in [0, π] whose cosine is x, and arctan x is the angle in (−π2, π2) whose tangent is x. Then cover the minus sign and find the special angle r, from 0 to π2, in that function's row.

    2. Read the sign of the input.

    3. Pick the side the range allows: Quadrant I or its edge for a zero or positive input; Quadrant IV for a negative input to arcsin or arctan, or straight down for arcsin(−1); Quadrant II for a negative input to arccos, or the left end for arccos(−1).

    4. Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: −π2 for arcsin(−1), π for arccos(−1).

    5. Check: evaluate the trig function of your answer and see the input come back with its sign, then confirm the answer is inside the range.

    Question

    Find arcsin(−12). In plain words: find the angle in [−π2, π2] whose sine is −12.

    Answer

    arcsin(−12) = −π6

    Trap

    The most common slip here is the right point with the wrong name. For arcsin(−22) many people write 7π4, because the unit circle they learned runs from 0 to 2π. The point is right, but 7π4 is not between −π2 and π2, so it is not the principal value. Name the same point by turning clockwise: −π4. And 5π4, in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.

    Term

    inverse function

    Definition

    The function that runs another one backward: if f sends a to b, the inverse f−1 sends b back to a. Its graph is the mirror image across the line y = x.

    Term

    principal value

    Definition

    The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.

    Term

    reference angle

    Definition

    The angle between an angle's ending side and the nearest part of the x-axis, always from 0 to π2. Angles with the same reference angle share the same trig values, up to sign.

    1 In plain words

    Finding an exact inverse value is like giving a taxi driver an address in two parts. The first part says how far: the reference angle, the size of the turn, which you read off the special angles while ignoring any minus sign. The second part says which side of town: the quadrant. The sign of the input picks the side, but each inverse function drives only in its own neighborhood. The inverse sine and the inverse tangent stay on the right half of the circle, so a negative input sends them below the x-axis: a negative angle. The inverse cosine stays on the top half, so a negative input sends it to the left side: an angle past π2.

    2 Picture it

    QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
    Sine is negative in Quadrants III and IV, cosine in II and III, tangent in II and IV.

    Reminder

    Reminder: Sine, cosine and the unit circle, Tangent from the point, Negative angles, Signs by quadrant, The three ranges, Allowed inputs, Inverse notation, Subtracting from π, Adding fractions, Subtracting a negative, Dividing fractions, Rationalizing, Radians and degrees
    • Sine, cosine and the unit circle. The point at angle θ on the unit circle is (cos θ, sin θ): cosine is the x-coordinate and sine is the height. At π3 the point is (12, 32), so cos π3 = 12 and sin π3 = 32.
    • Tangent from the point. Tangent is the height divided by the x-coordinate, y ÷ x. At π4 the point is (22, 22), so tan π4 = 1.
    • Negative angles. A negative angle turns clockwise from the positive x-axis: −π6 is a 30° clockwise turn and ends in Quadrant IV.
    • Signs by quadrant. In Quadrant II, x < 0 and y > 0, so cosine is negative and sine is positive. In Quadrant IV, x > 0 and y < 0, so sine and tangent are negative and cosine is positive.
    • The three ranges. arcsin: [−π2, π2]. arccos: [0, π]. arctan: (−π2, π2). A square bracket includes its end, and a round one leaves it out.
    • Allowed inputs. arcsin and arccos accept only inputs from −1 to 1, because a sine or cosine is a coordinate on a circle of radius 1. So arcsin(2) has no answer, while arctan accepts every number.
    • Inverse notation. sin⁻¹ x, cos⁻¹ x and tan⁻¹ x mean arcsin x, arccos x and arctan x. For example cos⁻¹(1) = 0, the angle whose cosine is 1. The −1 is not a power.
    • Subtracting from π. Write π with the bottom you need, then subtract the tops: π − π3 = 3π3 − π3 = 2π3.
    • Adding fractions. Fractions add when their bottoms match: 13 + 16 = 26 + 16 = 36 = 12.
    • Subtracting a negative. Subtracting a negative adds its positive: 5 − (−2) = 5 + 2 = 7.
    • Dividing fractions. Dividing by a fraction means multiplying by its flip: 12 ÷ 32 = 12 · 23 = 13.
    • Rationalizing. To clear a root from the bottom, multiply the top and the bottom by that root: 12 = 22, because 2 · 2 = 2.
    • Radians and degrees. π radians is 180°, so π6 = 30°, π4 = 45° and 3π4 = 135°.

    3 Why

    Each range is half of the circle, chosen earlier so each input has exactly one answer. The right half (arcsin, arctan) is Quadrant I above the x-axis and Quadrant IV below. Sine is the height, and tangent is the height divided by a positive left-right distance, so a negative input means below: Quadrant IV, or straight down when the inverse sine's input is −1. The top half (arccos) is Quadrant I on the right and Quadrant II on the left. Cosine is the left-right position, so a negative input means left: Quadrant II, or the left end, π, when the input is −1. Mirror images give the two answers: −r is r reflected across the x-axis, and π − r is r reflected across the y-axis.

    4 The rule

    Let r be the reference angle: the angle from 0 to π2 whose sine, cosine or tangent (the one being undone) equals the input without its minus sign.

    A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π−r for arccos. In symbols: arcsin(−x)=−arcsin x, arctan(−x)=−arctan x, arccos(−x)=π− arccos x. The result is the principal value: the one angle inside the range.

    The same idea, five ways

    Say it

    The reference angle is how far the answer's side sits from the x-axis, ignoring which way.

    Write it

    The reference angle for an input is the angle from 0 to π2 whose sine, cosine or tangent equals the input without its minus sign. It is also the angle between the answer's terminal side (the side where the turn ends) and the nearest part of the x-axis.

    In math
    • 0≤r≤π2
    • r in [0, π2]
    • input −22 for sine: r = π4, because sin π4 = 22
    • answer = r, −r or π − r
    Like

    Like the slant of a ladder: 45° off the ground is the same slant whether the ladder leans left or right. The slant is the reference angle, and the side it leans to is the quadrant.

    See it
    π/4
    The answer 3π4 ends π4 short of the negative x-axis, so its reference angle is π4.

    The same idea, other ways

    As a picture

    Picture the unit circle with the half each inverse may use shaded. arcsin answers on the right half, from straight down at −π2 to straight up at π2, both ends included; arctan uses the same half with both ends left out. arccos answers on the top half, from 0 on the right to π on the left. A negative sine is a point below the x-axis, and on the right half those points are in Quadrant IV, plus the bottom end, −π2, for an input of −1. A negative cosine is a point left of the y-axis, and on the top half those points are in Quadrant II, plus the left end, π, for an input of −1.

    x = cos θy = sin θ3π/4
    On the top half, the point with x-coordinate −22 sits in Quadrant II, at 3π4.
    As a story

    Picture a round town cut into four quarters by a north-south road and an east-west road. The inverse sine driver delivers only in the east half, and so does the inverse tangent driver. The inverse cosine driver delivers only in the north half. Tell the inverse sine driver the address is south of the east-west road, and only one quarter of that driver's territory fits: the southeast, Quadrant IV. Tell the inverse cosine driver the address is west of the north-south road, and only the northwest fits: Quadrant II. Two addresses sit right on a road, at the edge of a quarter: due south, for the inverse sine of −1, and due west, for the inverse cosine of −1. The reference angle is the size of the turn between the east-west road and the line from the town centre to the house. The sign says which side of a road the house is on.

    Rule of thumb

    Cover the minus sign and solve the positive version first. Then put the minus sign back the way the function wants it: arcsin and arctan put it on the angle, and arccos takes the angle away from π. With numbers: arcsin(12) = π6, so arcsin(−12) = −π6. arccos(12) = π3, so arccos(−12) = π − π3 = 2π3.

    arcsin(−x) = −arcsin x

    arctan(−x) = −arctan x

    arccos(−x) = π − arccos x

    Why it must be true

    Here r is the reference angle, strictly between 0 and π2. Turning by −r instead of r mirrors the point across the x-axis: x stays the same and the height changes sign. So sin(−r) = −sin r and tan(−r) = −tan r, which is why −r answers a negative sine or tangent, and −r stays on the right half. That move fails for cosine, because it keeps x. Mirror across the y-axis instead: the point at r goes to the point at π − r, the height stays and x changes sign. So cos(π − r) = −cos r, and π − r stays on the top half.

    x = cos θy = sin θ5π/6
    The point at 5π6, (−32, 12), is the point at π6, (32, 12), mirrored across the y-axis.
    In degrees, with small numbers

    Degrees can make the pattern feel familiar, with π radians = 180°. The reference angle for 12 is 30° for sine and 60° for cosine. So arcsin(−12) = −30°, a 30° turn clockwise, and arccos(−12) = 180° − 60° = 120°, which stops 60° short of a half turn. And arctan(−1) = −45°. Every arcsin and arctan answer lies between −90° and 90°, and every arccos answer between 0° and 180°. Back in radians: −30° = −π6, 120° = 2π3 and −45° = −π4.

    −30°terminal sideinitial side
    A negative angle turns clockwise: −30° ends in Quadrant IV.
    FunctionRange (half of the circle)Input 0 or positive (r is the reference angle)Input negativeExample
    arcsin x[−π2, π2]: right halfQuadrant I or its edge: rQuadrant IV, or straight down when x = −1: −rarcsin(−12) = −π6
    arccos x[0, π]: top halfQuadrant I or its edge: rQuadrant II, or π itself when x = −1: π − rarccos(−32) = 5π6
    arctan x(−π2, π2): right half, ends left outQuadrant I or its edge: rQuadrant IV: −rarctan(−1) = −π4

    Part 1: The inverse sine of a negative input

    The inverse sine answers only on the right half of the circle, from straight down (−π2) to straight up (π2). Sine is the height of the point. A negative input asks for a point below the x-axis, and the part of the right half below the x-axis is Quadrant IV together with its lowest point, straight down, which answers −1. To get there without leaving the range, you turn clockwise, so the answer is a negative angle: minus the reference angle.

    • Range: [−π2, π2], the right half: Quadrants IV and I, with straight down and straight up as its ends
    • Input 0 or positive: the answer is r, in Quadrant I or on its edge
    • Input negative: the answer is −r, in Quadrant IV, or straight down at −π2 when the input is −1
    • In symbols: arcsin(−x) = −arcsin x
    x = cos θy = sin θ−π/6
    Turning π6 clockwise lands at (32, −12), whose height is −12.

    Worked example

    Arcsin(−12)

    Find arcsin(−12). In plain words: find the angle in [−π2, π2] whose sine is −12.

    Show the steps and the answer
    input θoutput sin θ00π/61/2π/4√2/2π/3√3/2π/21↑ solve: output given, read every input above it
    Reference angle on the special-angle table: find 12 in the sine row and follow the arrow up to π6.
    1. Reference angle: which angle from 0 to π2 has sine 12? It is π6.The point at π6 is (32, 12), and the sine is its height, 12. So r = π6.
    2. Sign: −12 is negative.A negative sine means a point below the x-axis.
    3. Quadrant: IV.The range covers Quadrants IV and I, and only Quadrant IV is below the x-axis.
    4. Angle: −π6.Turning r = π6 clockwise reaches Quadrant IV, and a clockwise turn is written with a minus sign.
    Answer
    arcsin(−12) = −π6
    Double-check The point at −π6 is (32, −12), so sin(−π6) = −12, the input. And −π6, which is −30°, lies between −π2 and π2.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: arcsin(−12) = 7π6, because sin 7π6 = −12.
    The sine is right, but 7π6 is in Quadrant III, on the left half of the circle. The inverse sine never answers outside [−π2, π2].
    ✓ Instead: −π6: the same sine, and inside the range.

    Tips and tricks

    • For a negative input, an arcsin answer always starts with a minus sign and is never below −π2.

    Part 2: The inverse cosine of a negative input

    The inverse cosine answers only on the top half of the circle, from the right end (0) over to the left end (π). Cosine is how far right or left the point is. A negative input asks for a point left of the y-axis, and the part of the top half on the left is Quadrant II together with the left end, which answers −1. So the answer goes past π2: turn all the way to π, then come back by the reference angle. It is never a negative angle.

    • Range: [0, π], the top half: Quadrants I and II, with 0 and π as its ends
    • Input 0 or positive: the answer is r, in Quadrant I or on its edge (r = π2 when the input is 0)
    • Input negative: the answer is π − r, in Quadrant II, or π itself when the input is −1
    • In symbols: arccos(−x) = π − arccos x
    x = cos θy = sin θ5π/6
    At 5π6 the point is (−32, 12): left of the y-axis, still on the top half.

    Worked example

    Arccos(−32)

    Find arccos(−32). In plain words: find the angle in [0, π] whose cosine is −32.

    Show the steps and the answer
    input θoutput cos θ01π/6√3/2π/4√2/2π/31/2π/20↑ solve: output given, read every input above it
    Reference angle on the special-angle table: 32 in the cosine row sits under π6.
    1. Reference angle: which angle from 0 to π2 has cosine 32? It is π6.The point at π6 is (32, 12), and the cosine is its x-coordinate, 32. It is not π3: sin π3 is 32, but cos π3 is 12.
    2. Sign: −32 is negative.A negative cosine means a point left of the y-axis.
    3. Quadrant: II.The range covers Quadrants I and II, and only Quadrant II is left of the y-axis.
    4. Angle: π−π6=6π6−π6=5π6.The Quadrant II angle with reference angle r stops r short of a half turn. Writing π as 6π6 gives a common bottom, so the tops subtract: 6π − π = 5π.
    Answer
    arccos(−32) = 5π6
    Double-check The point at 5π6 is the point at π6 mirrored across the y-axis: (−32, 12). So cos 5π6 = −32, the input. And 5π6, which is 150°, lies between 0 and π.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: arccos(−32) = 7π6, because cos 7π6 = −32.
    The cosine is right, but 7π6 is more than π: the turn has gone below the x-axis, outside the range [0, π].
    ✓ Instead: 5π6, the Quadrant II angle with the same cosine.

    Tips and tricks

    • An arccos answer is never negative. For a negative input it always lies between π2 and π.

    Part 3: The inverse tangent of a negative input

    The inverse tangent answers on the right half of the circle, like the inverse sine, but the very top and bottom are left out, because tangent does not exist straight up or straight down. Tangent is the height divided by the left-right distance, and on the right half that distance is positive. So a negative tangent needs a negative height, which means Quadrant IV. The answer is a negative angle: minus the reference angle.

    • Range: (−π2, π2), the right half without its two ends, Quadrants IV and I
    • Every number is allowed as an input
    • Input 0 or positive: the answer is r, in Quadrant I or on its edge
    • Input negative: the answer is −r, in Quadrant IV
    • In symbols: arctan(−x) = −arctan x
    x = cos θy = sin θ−π/4
    At −π4 the point is (22, −22): height divided by x is −1.

    Worked example

    Arctan(−1)

    Find arctan(−1). In plain words: find the angle strictly between −π2 and π2 whose tangent is −1.

    Show the steps and the answer
    input θoutput tan θ00π/6√3/3π/41π/3√3π/2undefined↑ solve: output given, read every input above it
    Reference angle on the special-angle table: 1 in the tangent row sits under π4. Tangent has no value at π2.
    1. Reference angle: which angle from 0 to π2 has tangent 1? It is π4.At π4 the point is (22, 22). Tangent is y ÷ x, and a number divided by itself is 1. So r = π4.
    2. Sign: −1 is negative.On the right half, a negative tangent means a negative height.
    3. Quadrant: IV.The range covers Quadrants I and IV. Tangent is positive in Quadrant I and negative in Quadrant IV.
    4. Angle: −π4.Turning r = π4 clockwise reaches Quadrant IV inside the range, and a clockwise turn is a negative angle.
    Answer
    arctan(−1) = −π4
    Double-check At −π4 the point is (22, −22). Tangent = y ÷ x = −22 ÷ 22 = −1, the input. And −π4, which is −45°, lies strictly between −π2 and π2.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: arctan(−1) = 3π4, because tan 3π4 = −1.
    Tangent is negative in Quadrant II too, but 3π4 is past π2, outside the range (−π2, π2).
    ✓ Instead: −π4: the same tangent, and inside the range.

    Tips and tricks

    • arctan follows the same sign rule as arcsin. The difference: arctan never equals −π2 or π2, because tangent does not exist there.

    5 How

    1. Name the reference angle: cover any minus sign and find the special angle from 0 to π2 whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
    2. Read the sign of the input: zero, positive or negative.
    3. Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−π2) for arcsin, the left end (π) for arccos.
    4. Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: −π2 for arcsin(−1), π for arccos(−1).
    5. Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.

    The four-step method for an exact inverse value

    1
    Is it arcsin or arccos, with an input below −1 or above 1?
    YesStop: there is no answer, because a sine or cosine is never past 1 in size.
    NoGo on.
    ↓
    2
    Does the input have a root in the bottom, such as −12?
    YesRationalize first: 12 = 22. Then go on.
    NoGo on.
    ↓
    3
    With the minus sign covered, is the input a special value of this function? For sine or cosine those are 0, 12, 22, 32 and 1. For tangent they are 0, 33, 1 and 3.
    YesIts special angle from 0 to π2 is the reference angle r. Go on.
    NoNo special angle fits, so this method gives no exact answer.
    ↓
    4
    Is the input negative?
    YesGo on to the last question.
    NoThe answer is r.
    ↓
    5
    Is the function arccos?
    YesThe answer is π − r: in Quadrant II, or at the left end, π, when the input is −1.
    NoIt is arcsin or arctan, so the answer is −r: in Quadrant IV, or straight down, −π2, for arcsin(−1).
    1. Name the reference angle. First say what is asked: arcsin x is the angle in [−π2, π2] whose sine is x, arccos x is the angle in [0, π] whose cosine is x, and arctan x is the angle in (−π2, π2) whose tangent is x. Then cover the minus sign and find the special angle r, from 0 to π2, in that function's row.
    2. Read the sign of the input.
    3. Pick the side the range allows: Quadrant I or its edge for a zero or positive input; Quadrant IV for a negative input to arcsin or arctan, or straight down for arcsin(−1); Quadrant II for a negative input to arccos, or the left end for arccos(−1).
    4. Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: −π2 for arcsin(−1), π for arccos(−1).
    5. Check: evaluate the trig function of your answer and see the input come back with its sign, then confirm the answer is inside the range.

    6 Worked example

    Worked example

    Same input, two functions: arcsin(−22) and arccos(−22)

    Find the exact values of arcsin(−22) and arccos(−22). In plain words: the input is −22 both times. First find the angle in [−π2, π2] whose sine is −22. Then find the angle in [0, π] whose cosine is −22.

    Show the steps and the answer
    x = cos θy = sin θ−π/4
    The arcsin answer: the point below the x-axis on the right half.
    x = cos θy = sin θ3π/4
    The arccos answer: the point left of the y-axis on the top half.
    1. Reference angle, for both: cover the minus sign and find the angle from 0 to π2 whose sine is 22, and the one whose cosine is 22.At π4 the point on the unit circle is (22, 22). Its height (the sine) and its x-coordinate (the cosine) are both 22, so the reference angle is r = π4 for both questions.
    2. Sign, for both: the input −22 is negative.The minus sign is what moves each answer out of Quadrant I.
    3. arcsin, quadrant: pick Quadrant IV.The range [−π2, π2] is the right half of the circle, Quadrants IV and I. Sine is the height, and the height is negative only in Quadrant IV of those two.
    4. arcsin, angle: write −π4.Inside the range, Quadrant IV is reached by turning r clockwise, and a clockwise turn is a negative angle.
    5. arccos, quadrant: pick Quadrant II.The range [0, π] is the top half of the circle, Quadrants I and II. Cosine is the x-coordinate, and x is negative only in Quadrant II of those two.
    6. arccos, angle: write π−π4=4π4−π4=3π4.The Quadrant II angle with reference angle r stops r short of a half turn, so it is π − r. Writing π as 4π4 gives both fractions the bottom 4, and then the tops subtract: 4π − π = 3π.
    Answer
    • arcsin(−22) = −π4
    • arccos(−22) = 3π4
    Double-check Evaluate each answer. The point at −π4 is (22, −22), so sin(−π4) = −22, the input, and −π4 lies in [−π2, π2]. The point at 3π4 is (−22, 22), so cos 3π4 = −22, the input, and 3π4 lies in [0, π]. In degrees the answers are −45° and 180° − 45° = 135°. Same input, two different angles, each inside its own range.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 7

    Rung 1: a positive input

    Find arccos(32). In plain words: find the angle in [0, π] whose cosine is 32.

    Show the steps and the answer
    input θoutput cos θ01π/6√3/2π/4√2/2π/31/2π/20↑ solve: output given, read every input above it
    Find 32 in the cosine row. The arrow points up to its angle, π6.
    1. Reference angle: in the cosine row, cosπ6=32, so r=π6.The point at π6 is (32, 12), and cosine is the x-coordinate. Use the cosine row, not the sine row: sin π3 is also 32, but that is a sine.
    2. Sign: positive.There is no minus sign in front of 32.
    3. Quadrant: I.Quadrant I is inside all three ranges, and both coordinates are positive there.
    4. Angle: π6.In Quadrant I the answer is the reference angle itself.
    Answer
    arccos(32) = π6
    Double-check cos π6 is the x-coordinate of (32, 12), which is 32, the input. And π6 lies in [0, π].

    Rung 2 of 7

    Rung 2: an input of zero

    Find arcsin(0) and arccos(0). In plain words: find the angle in [−π2, π2] whose sine is 0, then the angle in [0, π] whose cosine is 0.

    Show the steps and the answer
    x = cos θy = sin θπ/2
    Straight up, the point (0, 1) has cosine 0, so arccos(0) = π2.
    1. arcsin(0), reference angle: the angle from 0 to π2 with sine 0 is 0.At angle 0 the point is (1, 0), and its height is 0.
    2. arcsin(0), sign and angle: zero is not negative, so the answer is r=0.Only a negative input moves the answer out of Quadrant I and its edges.
    3. arccos(0), reference angle: the angle from 0 to π2 with cosine 0 is π2.At π2 the point is (0, 1), straight up, and its x-coordinate is 0.
    4. arccos(0), sign and angle: zero is not negative, so the answer is r=π2.The same rule: no minus sign, so no move away from the reference angle.
    Answer
    • arcsin(0) = 0
    • arccos(0) = π2
    Double-check sin 0 = 0, and 0 is in [−π2, π2]. cos π2 = 0, and π2 is in [0, π]. The gotcha: arccos(0) is not 0, because cos 0 = 1.

    Rung 3 of 7

    Rung 3: a negative input for the inverse tangent

    Find arctan(−33). In plain words: find the angle strictly between −π2 and π2 whose tangent is −33.

    Show the steps and the answer
    x = cos θy = sin θ−π/6
    At −π6 the height is negative and x is positive, so the tangent is negative.
    1. Reference angle: the angle from 0 to π2 with tangent 33 is π6.At π6 the point is (32, 12). Tangent is y ÷ x = 12 ÷ 32 = 12 · 23 = 13, and multiplying top and bottom by 3 gives 33.
    2. Sign: negative.The input has a minus sign in front.
    3. Quadrant: IV.arctan answers on the right half, Quadrants I and IV, and tangent is negative only in Quadrant IV of those two.
    4. Angle: −π6.A clockwise turn of r reaches Quadrant IV inside the range, and clockwise is negative.
    Answer
    arctan(−33) = −π6
    Double-check At −π6 the point is (32, −12). Tangent = −12 ÷ 32 = −13 = −33, the input. And −π6 lies strictly between −π2 and π2.

    Rung 4 of 7

    Rung 4: answers at the ends of the range

    Find arcsin(−1) and arccos(−1). In plain words: find the angle in [−π2, π2] whose sine is −1, then the angle in [0, π] whose cosine is −1.

    Show the steps and the answer
    x = cos θy = sin θ−π/2
    Straight down: height −1.
    x = cos θy = sin θπ
    The left end: x-coordinate −1.
    1. arcsin(−1), reference angle: the angle from 0 to π2 with sine 1 is π2.At π2 the point is (0, 1), straight up, with height 1.
    2. arcsin(−1), sign and angle: negative, so the answer is −r=−π2.For arcsin a negative input means a clockwise turn. Turning π2 clockwise points straight down, the bottom end of the range.
    3. arccos(−1), reference angle: the angle from 0 to π2 with cosine 1 is 0.At 0 the point is (1, 0), with x-coordinate 1.
    4. arccos(−1), sign and angle: negative, so the answer is π−r=π−0=π.For arccos a negative input means mirroring across the y-axis: (1, 0) mirrors to (−1, 0), which sits at a half turn, π.
    Answer
    • arcsin(−1) = −π2
    • arccos(−1) = π
    Double-check At −π2 the point is (0, −1), so sin(−π2) = −1, and −π2 is the bottom end of [−π2, π2], included because of the square bracket. At π the point is (−1, 0), so cos π = −1, and π is the top end of [0, π], also included. The gotcha: these answers sit on an axis, not inside a quadrant, and the four steps still work.

    Rung 5 of 7

    Rung 5: an input that is not allowed

    Find arccos(−3), if it exists. In plain words: is there an angle in [0, π] whose cosine is −3?

    Show the steps and the answer
    lowest: −1rangeπ/2π3π/22π−2−112
    Every cosine lies in the shaded band from −1 to 1. The input −3, about −1.73, is below the band.
    1. Size of the input: 3 is about 1.73, so −3 is about −1.73.1.7 × 1.7 = 2.89 and 1.8 × 1.8 = 3.24, so the number that squares to 3 sits between 1.7 and 1.8.
    2. Allowed inputs: arccos accepts only numbers from −1 to 1.Cosine is the x-coordinate of a point on a circle of radius 1, so it is never below −1. About −1.73 is below −1.
    3. Stop: arccos(−3) does not exist.No angle has cosine −3, so the reference angle step has nothing to find: no special angle has cosine 3.
    4. Name the trap: 3 belongs to the tangent row, since tanπ3=3. So arctan(−3)=−π3 does exist.arctan accepts every number and arccos does not. Borrowing a value from the wrong row is how arccos(−3) gets a fake answer.
    Answer
    arccos(−3) does not exist (it is undefined): no angle has a cosine below −1.
    Double-check Try the tempting answers: cos 2π3 = −12, and cos 5π6 = −32, which is about −0.87. Neither is −3. No angle can do better, because the leftmost point of the unit circle, (−1, 0), has the smallest cosine, −1.

    Rung 6 of 7

    Rung 6: inverse notation and an input in disguise

    Find cos⁻¹(−12). In plain words: the input is −12. Find the angle in [0, π] whose cosine is that number.

    Show the steps and the answer

    12=1·22·2=22

    cos⁻¹(−12)=cos⁻¹(−22)

    =π−π4=3π4

    1. Notation: cos−1 means arccos.The −1 written up high means the inverse function, as with sin⁻¹. It does not mean 1 divided by cosine.
    2. Clear the root from the bottom: 12=1·22·2=22.Multiplying the top and the bottom by the same number leaves a fraction's value unchanged, and 2 · 2 = 2. The input is −22, a special value in disguise.
    3. Reference angle: cosπ4=22, so r=π4.The point at π4 is (22, 22).
    4. Sign and quadrant: negative, so Quadrant II.arccos answers on the top half, and a negative cosine puts the point on its left part, Quadrant II.
    5. Angle: π−π4=4π4−π4=3π4.The Quadrant II angle with reference angle r is π − r, and π = 4π4 gives a common bottom.
    Answer
    cos⁻¹(−12)=3π4
    Double-check The point at 3π4 is (−22, 22), so cos 3π4 = −22, which equals −12, the input. In degrees 3π4 is 135°, between 0° and 180°.

    Rung 7 of 7

    Rung 7: the hardest kind, two inverses in one expression

    Find the exact value of arccos(−12) − arcsin(−12). In plain words: find each angle on its own with the four steps, then subtract the second angle from the first.

    Show the steps and the answer
    x = cos θy = sin θ2π/3
    arccos(−12): left of the y-axis on the top half.
    x = cos θy = sin θ−π/6
    arcsin(−12): below the x-axis on the right half.
    1. arccos(−12), reference angle: cosπ3=12, so r=π3.The point at π3 is (12, 32), and cosine is the x-coordinate.
    2. arccos(−12), sign, quadrant and angle: negative, so Quadrant II, and π−π3=3π3−π3=2π3.arccos answers on the top half, and a negative cosine means its left part.
    3. arcsin(−12), reference angle: sinπ6=12, so r=π6.The point at π6 is (32, 12), and sine is the height. The two reference angles differ because they come from different rows.
    4. arcsin(−12), sign, quadrant and angle: negative, so Quadrant IV, and the answer is −π6.arcsin answers on the right half, and a negative height means its lower part, reached by a clockwise turn.
    5. Subtract: 2π3−(−π6)=2π3+π6.Subtracting a negative number adds its positive, the way 5 − (−2) = 7.
    6. Add with a common bottom: 2π3=4π6, so 4π6+π6=5π6.Fractions add only when their bottoms match. Multiplying the top and bottom of 2π3 by 2 turns thirds into sixths.
    Answer
    arccos(−12) − arcsin(−12) = 5π6
    Double-check Each angle: the point at 2π3 is (−12, 32), so cos 2π3 = −12. The point at −π6 is (32, −12), so sin(−π6) = −12. The arithmetic in degrees: 120° − (−30°) = 150°, and 5π6 is 150° because π6 is 30°.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Using the cosine move for sine: arcsin(−32) = π − π3 = 2π3.
    Mirroring across the y-axis keeps the height, so sin 2π3 = +32: the sign never changed. And 2π3 is outside [−π2, π2].
    ✓ Instead: For a negative sine, turn clockwise: arcsin(−32) = −π3, and sin(−π3) = −32.
    ✗ Not this: Using the sine move for cosine: arccos(−22) = −π4.
    Turning clockwise keeps the x-coordinate, so cos(−π4) = +22, not −22. And an arccos answer is never negative, since its range is [0, π].
    ✓ Instead: For a negative cosine, take the angle away from π: π − π4 = 3π4, and cos 3π4 = −22.
    ✗ Not this: Reading the wrong row: arccos(12) = π6.
    It is sin π6 that equals 12. cos π6 is 32.
    ✓ Instead: cos π3 = 12, so arccos(12) = π3. Take the reference angle from the row of the function you are undoing.
    ✗ Not this: Running the four steps on arcsin(−0.3).
    0.3 is not a special value: no special angle has sine 0.3, so the reference angle step has nothing exact to name.
    ✓ Instead: The answer exists, and the sign rule still says it is a negative angle between −π2 and 0. Finding its size needs a calculator, which a later lesson covers.

    Tips and tricks

    • Memory device: cosine on top, sine and tangent on the right. Every arccos answer is on the top half of the circle, from 0 to π. Every arcsin and arctan answer is on the right half, from −π2 to π2.
    • Memory device for a negative input: sine and tangent turn clockwise, cosine turns past straight up. arcsin and arctan give −r. arccos gives π − r, which is more than π2.
    • No inverse ever answers in Quadrant III, because none of the three ranges reaches it. An answer such as 7π6 or 5π4 is always wrong.
    • Check every answer twice: take the sine, cosine or tangent of your angle and see the input come back with its sign, then confirm the angle is inside the range. An answer that passes only the first check is the most common slip.
    • On paper, write the four steps as one line, for example: r = π4, negative, arccos, Quadrant II, π − π4 = 3π4. Each decision is visible, so a slip is quick to spot.
    • If the input has a root in the bottom, such as −13, rationalize it first so it matches a value in the special-angle table: 13 = 33.

    7 The trap

    The most common slip here is the right point with the wrong name. For arcsin(−22) many people write 7π4, because the unit circle they learned runs from 0 to 2π. The point is right, but 7π4 is not between −π2 and π2, so it is not the principal value. Name the same point by turning clockwise: −π4. And 5π4, in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.

    Flash cards

    Say the answer out loud, then flip.

    Like a taxi address, an exact inverse value has two parts. What are they?
    • How far: the reference angle r, the angle from 0 to π2 whose sine, cosine or tangent equals the input with its minus sign covered.
    • Which side: the quadrant, picked by the sign of the input, but only inside that function's range; the inputs 0, 1 and −1 (for arctan, only 0) land on an axis instead.
    For arcsin or arctan, where does a negative input land, and what angle do you write?
    • Below the x-axis, in Quadrant IV or on its edge, because their range is the right half of the circle.
    • Write −r. For example, arctan(−3) = −π3, since tan π3 = 3.
    For arccos, where does a negative input land, and what angle do you write?
    • Left of the y-axis, in Quadrant II or on its edge, because its range is the top half of the circle.
    • Write π − r. For example, arccos(−12) = π − π3 = 2π3, since cos π3 = 12.
    Why is 11π6 the wrong answer for arcsin(−12)?
    • It names the right point, but it is outside the arcsin range, −π2 to π2, so it is not the principal value.
    • Name the same point by turning clockwise: −π6.