Quarry School

Graphs of the other four functions: crash course

about 27 min to listen9 lessons14 questions to tryUnit 5 of 11

Short view. Each lesson's rule, its steps and its trap. Switch to Full for a worked example and a question to try in every lesson.Full view. Each lesson's rule, its steps, one worked example with Watch it solved, the trap, and one question to try.

Starts here no skill from another unit needed first

1 Four formulas and the inputs they must skip

about 1 minOpen the full lessonOnly this lesson

The rule

tanx=sinxcosx; cotx=cosxsinx; secx=1cosx; cscx=1sinx.

For tan and sec, require x≠π2+nπ; for cot and csc, require x≠nπ, with n any integer.

How

  1. Write the formula as a fraction because the denominator identifies the restriction.
  2. Set the denominator equal to 0 to find the inputs that would make the division impossible.
  3. Read those angles from the unit circle and substitute them back into the denominator to verify it is 0.
  4. Exclude those inputs. Keep a zero numerator when the denominator is nonzero.

Worked example

Worked example

Which machines accept a quarter-turn?

In plain words, use one angle to decide which machines have a number to return. Find tan, cot, sec and csc at x = π2.

Show the steps and the answer
x = cos θy = sin θ(0, 1)
The zero horizontal coordinate excludes tan and sec; the height 1 allows cot and csc.
  1. The point at π2 is (0, 1), so cos(π2)=0 and sin(π2)=1.The first coordinate is cosine and the second is sine.
  2. tan(π2)=10 and sec(π2)=10, so both are undefined.Their common denominator, cosine, is 0. This verifies why the angle is excluded.
  3. cot(π2)=01=0 and csc(π2)=11=1.Their denominator, sine, is 1, so both divisions are permitted.
Answer
  • tan(π2): undefined.
  • cot(π2): 0.
  • sec(π2): undefined.
  • csc(π2): 1.
Double-check At a vertical-axis angle, the two cosine-bottom functions fail and the two sine-bottom functions remain defined, exactly as the rule predicts.

The trap

A zero on the top is not a break. Check the bottom first: 01 = 0, while 10 is undefined.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Zero on the bottom

In plain words, decide whether a half-turn has a cosecant output. Find csc π.

Show the steps and the answer
domainπ/2π3π/22π−4−224
y = csc x, for x from 0.1 to 6.4.
  1. sinπ=0, so cscπ would be 10.The point at π is (−1, 0).
  2. Exclude x=π.This is a verified sine zero, so the fraction has no output.
Answer
csc π is undefined.
Double-check π = nπ with n = 1, so the input belongs to the sine-zero family.

2 Range: the output heights each graph can reach

about 2 minOpen the full lessonOnly this lesson

The rule

tan x and cot x have range (−∞,∞).

sec x and csc x have range (−∞,−1]∪[1,∞), meaning y≤−1 or y≥1.

How

  1. Identify whether you have a quotient function or a reciprocal-of-sine-or-cosine function.
  2. For tangent or cotangent, accept any real output because every height occurs.
  3. For secant or cosecant, keep outputs at or below −1 and at or above 1.
  4. Include −1 and 1; exclude only the open middle band −1 < y < 1.

Worked example

Worked example

Which proposed secant heights are possible?

In plain words, check four proposed heights against the range. Decide whether sec x can equal 1, −2, 0 or 12.

Show the steps and the answer
−2−101/21(−∞, −1] ∪ [1, ∞)
The two allowed pieces contain 1 and −2, while the middle candidates lie in the gap.
  1. Keep 1 because sec0=1cos0=11=1.The endpoint 1 is included, and input 0 gives it.
  2. Keep −2 because cos(2π3)=−12, so sec(2π3)=1÷(−12)=−2.A reciprocal retains the negative sign. Reflection of the 60° circle point into the upper-left region changes cosine to −12.
  3. Reject 0 because 1 divided by a finite nonzero number cannot be zero.If the reciprocal equaled 0, multiplying by its denominator would give 1 = 0.
  4. Reject 12 because it would require cosx=2, outside cosine's possible coordinates.Taking the reciprocal back checks whether the proposed output could have a valid denominator.
Answer
  • 1: possible.
  • −2: possible.
  • 0: impossible.
  • 12: impossible.
Double-check The permitted heights satisfy y ≤ −1 or y ≥ 1; the two rejected heights lie in the gap.

The trap

Excluding ±1 along with the middle band. The gap is open: −1 < y < 1. At the edges, reciprocal values are still ±1.

3 Even and odd: how the picture balances

about 2 minOpen the full lessonOnly this lesson

The rule

sec(−x)=secx is even, with y-axis symmetry.

tan(−x)=−tanx,cot(−x)=−cotx and csc(−x)=−cscx are odd, with origin symmetry. In each identity, x and −x must both be allowed inputs.

How

  1. Check that the input is allowed before using symmetry.
  2. If the function is secant, negate the input and keep the output height.
  3. If it is tangent, cotangent or cosecant, negate both input and output.
  4. On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.

Worked example

Worked example

Same input distance, different symmetry

In plain words, predict the heights at the mirror input without rebuilding the circle each time. Find sec(−π4) and tan(−π4) using the positive-angle values.

Show the steps and the answer
same heightsame height−2π−ππ2π−4−224
y = sec x, its points labelled “same height”.
  1. sec(π4)=1÷22=2, and tan(π4)=1.The equal positive circle coordinates give tangent 1 and the refreshed reciprocal gives secant 2.
  2. sec(−π4)=2.Even symmetry keeps the output height when the input changes sign.
  3. tan(−π4)=−1.Odd symmetry changes the output sign when the input changes sign.
Answer
  • sec(−π4) = 2.
  • tan(−π4)=−1.
Double-check Directly at −π4, cosine is 22 and sine is −22, so the reciprocal is 2 and the quotient is −1.

The trap

Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.

4 Period: copy the right-sized piece

about 2 minOpen the full lessonOnly this lesson

The rule

tan(x+π)=tanx and cot(x+π)=cotx.

sec(x+2π)=secx and csc(x+2π)=cscx. Their fundamental periods are π,π,2π and 2π respectively.

How

  1. Select π for tangent or cotangent and 2π for secant or cosecant.
  2. Sketch a complete piece of that width, keeping excluded endpoints out of the graph.
  3. Copy its points and breaks left and right by integer multiples of the period.
  4. For an exact value, add or subtract complete periods to reach a known allowed input.

Worked example

Worked example

Use a period to reach a familiar input

In plain words, remove complete repeating pieces until each input is an angle you know. Find tan(9π4) and csc(5π2).

Show the steps and the answer
knownone period laterπ/23π/25π/2−4−224
y = csc x, for x from 0 to 8.3.
  1. 9π4−2π=9π4−8π4=π4.2π is two tangent periods, so subtracting it preserves tangent's output.
  2. tan(9π4)=tan(π4)=1.The remaining input has equal positive sine and cosine.
  3. 5π2−2π=5π2−4π2=π2.2π is one cosecant period, so subtracting it preserves cosecant's output.
  4. csc(5π2)=csc(π2)=1.The remaining input has sine 1, whose reciprocal is 1.
Answer
  • tan(9π4)=1.
  • csc(5π2) = 1.
Double-check Both original inputs end at the same circle points as the reduced inputs after complete turns. Their denominators are nonzero, so each calculation is permitted.

The trap

Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Move a negative input to a familiar angle

Find tan(−7π4). In plain words, add complete tangent repeats until the input becomes a familiar positive angle.

Show the steps and the answer
−7π/4terminal sideinitial side
The clockwise turn ends on the same ray as 45°.
  1. Add 2π=8π4: −7π4+2π=π4.Two tangent periods preserve the output and make the remaining angle familiar.
  2. At π4, sine and cosine are both 22, so tangent is 1.Equal nonzero numbers divide to 1.
Answer
tan(−7π4)=1.
Double-check The original angle reaches the same unit-circle point as π4 after a full turn; its cosine is nonzero, confirming that evaluation is allowed.

5 Tangent and the meaning of a vertical asymptote

about 8 minOpen the full lessonOnly this lesson

The rule

tanx=sinxcosx, with x≠π2+nπ for every integer n.

The vertical asymptotes are x=π2+nπ.Each branch is continuous and increasing; the central branch is on (−π2,π2) and the pattern repeats every π.

How

  1. Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.
  2. For the central branch, use x = −π2 and x = π2. Check cos(−π2) = 0 and cos(π2) = 0 before drawing the dashed vertical lines.
  3. Plot (−π4, −1), (0, 0), and (π4, 1), using the exact unit-circle values in the worked example's three-column table.
  4. Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.
  5. Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.

Worked example

Worked example

The tangent branch through (π, 0) and its vertical asymptotes

Graph the branch of y = tan x that passes through the point (π, 0). The three-column table gives exact values on this branch: tan(3π4) = −1, tan(π) = 0 and tan(5π4) = 1. The table lists the inputs as multiples of π, so 0.75, 1 and 1.25 stand for 3π4, π and 5π4. (a) Use cos x = 0 to find the two vertical asymptotes that bound this branch, and check that cos x = 0 at each one. (b) Confirm the three table values from the unit-circle values of sin x and cos x, then plot the three points. (c) Describe what the graph does as x approaches each asymptote from inside the branch, and explain why the graph never meets the line x = 3π2. (d) Copy the branch π units left and π units right, and list every vertical asymptote in the three-branch sketch.

Show the steps and the answer
input x (as a multiple of π)output tan x0.75−1101.251↓ evaluate: input given, read the output below it
Three-column table for the branch of y = tan x through (π, 0).
  1. Solve cosx=0. On the unit circle, cos x is 0 only at the top point (0, 1) and the bottom point (0,−1), so x=π2+nπ for every integer n: …, −π2,π2,3π2,5π2, … The nearest of these on each side of π are x=π2 on the left and x=3π2 on the right.tan x = sinxcosx, so any input that makes the denominator cos x equal 0 has no tangent value and must be excluded. The branch through (π, 0) runs from the nearest excluded input on the left of π to the nearest excluded input on the right of π.
  2. Check both boundary inputs before drawing: cos(π2)=0 (with sin(π2)=1) and cos(3π2)=0 (with sin(3π2)=−1). Then draw dashed vertical lines x=π2 and x=3π2. They are 3π2−π2=π apart, which is the width of one branch.A dashed line belongs only where the denominator really is 0. Do not draw one where sin x = 0. At x = π, tan(π) = 0 ÷ (−1) = 0, so that input gives a point on the graph and does not give an asymptote.
  3. Confirm the table with exact unit-circle values. At 3π4: cosx=−22 and sinx=22, so tan(3π4)=22÷(−22)=−1. At π: cosx=−1 and sinx=0, so tan(π)=0÷(−1)=0. At 5π4: cosx=−22 and sinx=−22, so tan(5π4)=(−22)÷(−22)=1. Plot (3π4,−1),(π,0) and (5π4,1).Exact values give exact points. 3π4 is halfway between π2 and π, and 5π4 is halfway between π and 3π2. The three points therefore mark the center of the branch and one point on each side of it.
  4. Find the sign of tan x close to each line. Just right of π2 (Quadrant II), sin x is close to 1 and cos x is a small negative number, so the quotient is a large negative number. Just left of 3π2 (Quadrant III), sin x is close to −1 and cos x is a small negative number, so the quotient is a large positive number.Dividing a number near 1 or −1 by a number shrinking toward 0 gives outputs that grow past any bound. The signs of sin x and cos x decide whether the curve heads down or up.
  5. Draw one smooth rising curve through the three points. As x approaches π2 from the right, the curve drops without bound beside that dashed line. As x approaches 3π2 from the left, the curve rises without bound beside the other dashed line. The curve gets ever closer to each line but never touches or crosses it.Each branch of tangent is continuous and increasing on its open interval. The inputs x = π2 and x = 3π2 are outside the domain, so no point of the graph can lie on those lines. That is the meaning of a vertical asymptote: an excluded input where the outputs grow without bound as the inputs close in on it.
  6. Copy the branch π units left and π units right. Subtract π from each point to get (−π4,−1), (0, 0) and (π4,1) between x=−π2 and x=π2. Add π to each point to get (7π4,−1),(2π,0) and (9π4,1) between x=3π2 and x=5π2. Draw the new dashed lines x=−π2 and x=5π2, and keep every curve separate from every line.Tangent repeats every π, so tan(x + π) = tan x and tan(x − π) = tan x. Moving every point of one branch by π gives the neighboring branch. Moving a line x = π2 + nπ by π gives another line of the same form.
Answer
The branch lies between the vertical asymptotes x = π2 and x = 3π2, where cos x = 0. It passes through (3π4, −1), (π, 0) and (5π4, 1) and rises from left to right. It drops without bound as x approaches π2 from the right and rises without bound as x approaches 3π2 from the left. It never meets x = 3π2 because cos(3π2) = 0, which leaves tan x = sinxcosx undefined there. The three-branch sketch has vertical asymptotes x = −π2, x = π2, x = 3π2 and x = 5π2. The copied branches pass through (−π4, −1), (0, 0), (π4, 1) and through (7π4, −1), (2π, 0), (9π4, 1).
Double-check Shift check: 3π4 − π = −π4, and tan(−π4) = (−22) ÷ 22 = −1, which matches tan(3π4). Also 5π4 − π = π4, and tan(π4) = 1, which matches tan(5π4). Rising check: the outputs −1, 0, 1 increase as the inputs 3π4, π, 5π4 increase. Asymptote check on a calculator in radian mode: π2 ≈ 1.571 and tan(1.6) ≈ −34.23, a large negative value just right of the left line. Also 3π2 ≈ 4.712 and tan(4.7) ≈ 80.71, a large positive value just left of the right line. Both match the drawn ends.

Work to write

  1. cos x = 0 when x = π2 + nπ, so the branch through (π, 0) lies between x = π2 and x = 3π2
  2. cos(π2) = 0 and cos(3π2) = 0, so the dashed asymptotes are x = π2 and x = 3π2
  3. tan(3π4)=22÷(−22)=−1
  4. tan(π)=0÷(−1)=0
  5. tan(5π4)=(−22)÷(−22)=1
  6. Plot (3π4, −1), (π, 0) and (5π4, 1), then draw one smooth rising curve through them
  7. As x approaches π2 from the right, tan x drops without bound; as x approaches 3π2 from the left, tan x rises without bound
  8. x = 3π2 is not in the domain because cos(3π2) = 0, so the graph never touches that line
  9. Copies: (−π4, −1), (0, 0), (π4, 1) and (7π4, −1), (2π, 0), (9π4, 1)
  10. Asymptotes in the sketch: x = −π2, x = π2, x = 3π2, x = 5π2

The trap

Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Add the quarter-π points

Add tan(−π4) and tan(π4) to the central sketch. This asks for the heights at the two inputs on either side of 0.

Show the steps and the answer
input x in radiansoutput tan x−π/4−100π/41↓ evaluate: input given, read the output below it
The highlighted radian inputs add the two heights beside the zero.
−101−π/2π/2−4−224
In radians, these three points lie on one rising branch.
  1. At π4, divide 22 by 22 to get 1.Sine and cosine are equal and nonzero there.
  2. At −π4, divide −22 by 22 to get −1.Sine is negative and cosine positive, with equal magnitudes.
  3. Plot (−π4,−1), (0, 0), and (π4,1), then connect them with a smooth rising curve inside the boundary lines.The accepted inputs and outputs in the table guide the continuous increasing branch.
Answer
  • tan(−π4)=−1.
  • tan(π4)=1.
  • Central branch: rises through the three points.
Double-check A half-turn about the origin sends (π4, 1) to (−π4, −1), which matches tangent's odd symmetry.

6 Cotangent: the branch that falls

Open the full lessonOnly this lesson

The rule

cotx=cosxsinx, with x≠nπ for every integer n.

Its vertical asymptotes are x=nπ and its period is π.
On (0,π), the continuous decreasing branch passes through (π4,1),(π2,0), and (3π4,−1).

How

  1. Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.
  2. For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.
  3. Read the three table columns to plot (π4, 1), (π2, 0), and (3π4, −1).
  4. Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.
  5. Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.

Worked example

Worked example

The cotangent branch between π and 2π

Graph the branch of y = cot x that passes through the point (3π2, 0), then extend the graph using the period. The three-column table gives exact values on this branch: cot(4π3) = 33, cot(3π2) = 0 and cot(5π3) = −33. The table lists each input as a count of sixths of π, so 8, 9 and 10 stand for 8π6, 9π6 and 10π6. It rounds the outputs to two decimal places: 0.58, 0 and −0.58.

Show the steps and the answer
input x (sixths of π)output cot x (to 2 decimal places)80.589010−0.58↓ evaluate: input given, read the output below it
Table of y = cot x on the branch between π and 2π.
  1. Solve sinx=0. Sine is zero at x= …, −π, 0, π,2π,3π, …, which is x=nπ for every integer n. Exclude these inputs, so the domain of y=cotx is x≠nπ.cot x = cosxsinx has sin x in the denominator, and division by 0 is undefined. At x = nπ the numerator cos x is 1 or −1, not 0. So the size of the quotient grows without bound near x = nπ, which makes each line x = nπ a vertical asymptote.
  2. Since π<3π2<2π, the branch through (3π2,0) lies between π and 2π, two neighboring zeros of sine. Draw dashed vertical lines at x=π and x=2π. Plug the endpoints back into sine: sinπ=0 and sin2π=0.A cotangent branch runs from one asymptote to the next. No multiple of π lies strictly between π and 2π, so the curve is unbroken there. Checking sine at both endpoints confirms that the dashed lines sit exactly where the denominator is zero.
  3. Read the three table columns. Convert each input: 8π6=4π3,9π6=3π2 and 10π6=5π3. Pair them with the exact outputs 33, 0 and −33, which the table shows as 0.58, 0 and −0.58. Plot (4π3,33),(3π2,0) and (5π3,−33).The table counts sixths of π so that every input is a whole number. Dividing a count by 6 and simplifying turns it back into an angle. All three inputs lie between π and 2π. The zero sits exactly halfway between the asymptotes, because (π + 2π) ÷ 2 = 3π2.
  4. Draw one smooth curve through the three points that falls from left to right. On the right side of x=π the curve rises without bound along the dashed line. On the left side of x=2π it falls without bound.On the interval (π, 2π), sin x is negative. Just right of π, cos x is near −1 and sin x is a tiny negative number, so cosxsinx is a large positive number. Just left of 2π, cos x is near 1 and sin x is a tiny negative number, so the quotient is a large negative number. The table agrees: as x increases, the outputs go 33, then 0, then −33.
  5. Copy the branch every π units. Moving the three points π to the left gives (π3,33),(π2,0) and (2π3,−33) between x=0 and x=π. Moving them π to the right gives (7π3,33),(5π2,0) and (8π3,−33) between x=2π and x=3π. Draw a dashed asymptote at every x=nπ and keep each copy separate there.Cotangent has period π, so cot(x + π) = cot x. Every branch is therefore the same falling curve shifted by a multiple of π. The function is undefined at each x = nπ, so no copy is joined to its neighbor across an asymptote.
Answer
The branch lies between the dashed asymptotes x = π and x = 2π. It passes through (4π3, 33), (3π2, 0) and (5π3, −33) and falls from left to right. It rises without bound as x approaches π from the right and falls without bound as x approaches 2π from the left. The full graph repeats this branch between x = nπ and x = (n + 1)π for every integer n, with a dashed asymptote at each x = nπ.
Double-check Compute the table values from cot x = cosxsinx. First, cos(4π3) = −12 and sin(4π3) = −32, so cot(4π3) = (−12) ÷ (−32) = 13 = 33 ≈ 0.58. Next, cos(3π2) = 0 and sin(3π2) = −1, so cot(3π2) = 0. Last, cos(5π3) = 12 and sin(5π3) = −32, so cot(5π3) = −33 ≈ −0.58. The left copy also agrees with the rule's branch on (0, π). The point (π3, 33) falls between (π4, 1) and (π2, 0), and (2π3, −33) falls between (π2, 0) and (3π4, −1).

Work to write

  1. sin x = 0 at x = nπ, so cot x is undefined there: x ≠ nπ
  2. Asymptotes x = π and x = 2π; sin π = 0 and sin 2π = 0
  3. 8π6=4π3,9π6=3π2,10π6=5π3
  4. Plot (4π3, 33), (3π2, 0), (5π3, −33)
  5. Falling branch: rises without bound just right of x = π, falls without bound just left of x = 2π
  6. Period π: copy the branch between each x = nπ and x = (n + 1)π, kept separate at x = nπ

The trap

Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at π2 that gives the valid output 0.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

Draw the positive half of the branch

Sketch cotangent for 0 < x ≤ π2, including its point at π4. This asks for the positive half of a branch and the midpoint zero, while excluding 0.

Show the steps and the answer
input x in radiansoutput cot x0undefinedπ/41π/20↓ evaluate: input given, read the output below it
The radian input 0 is excluded, while the highlighted columns provide two allowed points.
(π/4, 1)(π/2, 0)π/21234
The positive half-branch falls from the asymptote to its included zero at π2 radians.
  1. Exclude 0 because sin0=0; draw the dashed line x=0.Substitution finds and verifies the zero denominator at the left boundary.
  2. At π4, divide 22 by itself to get 1, then plot (π4,1).Equal nonzero cosine and sine values give the quotient 1.
  3. Include (π2,0) and draw a falling curve toward it from high positive heights near 0.The denominator is positive inside this half-interval, and the quotient decreases toward its allowed zero.
Answer
  • Excluded boundary: x = 0.
  • Points: (π4, 1), (π2, 0).
  • Shape: positive and falling on (0, π2), with the zero at π2 included.
Double-check Quadrant I has positive sine and cosine, so cotangent must stay positive before π2; the axis point at π2 supplies the included zero.

7 Cosecant: build a reciprocal graph from sine

Open the full lessonOnly this lesson

The rule

cscx=1sinx, with x≠nπ for every integer n.

Its vertical asymptotes are x=nπ, its range is (−∞,−1]∪[1,∞), its period is 2π, and csc(−x)=−cscx.

How

  1. Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.
  2. Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.
  3. Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.
  4. Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.
  5. Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.

Worked example

Worked example

A complete cosecant period

You need the graph pieces across one full turn, including the locations where no point exists. Sketch y = csc x on 0 ≤ x ≤ 2π using sine as the guide.

Show the steps and the answer
(π/2, 1)(3π/2, −1)rangeπ/2π3π/22π−4−224
The same picture, shown 6 times now: y = csc x, solid, beside y = sin x, dashed, for y from −4 to 4.
input xoutput sin x00π/61/2π/215π/61/2π07π/6−1/23π/2−111π/6−1/22π0
Read each output directly below its input; the inputs are angles in radians and sin x is the output height.
input xoutput csc x0undefinedπ/62π/215π/62πundefined7π/6−23π/2−111π/6−22πundefined
Read each output directly below its input; the inputs are angles in radians and csc x is the output height.
  1. Draw the sine guide from x=0 to x=2π, using the sine fntable visual.The sine row gives the starting height under each angle, and the reciprocal construction keeps that angle fixed.
  2. Set sinx=0 to find denominator zeros: x=0,π,2π in this interval. Plug them back in: sin0=0,sinπ=0,sin2π=0.This finds the inputs that cannot be used in 1sinx, so each gets an asymptote and no cosecant point.
  3. Keep (π2,1) and (3π2,−1).The sine guide has height 1 and −1 there, and 11 = 1 while 1−1 = −1.
  4. Read the columns under π6 and 5π6 in the sine table. Replace their 12 heights by 1÷12=2.These two reciprocal points guide the positive branch on (0, π). Rebuild the farther input: 5π6 = π − π6, so reflection across the vertical axis keeps sine 12.
  5. Read the columns under 7π6 and 11π6. Replace their −12 heights by 1÷(−12)=−2.A positive numerator divided by a negative denominator gives a negative output, guiding the negative branch on (π, 2π). Here 7π6 = π + π6, so a half-turn reverses sine. Also 11π6 = 2π − π6, so reflecting to −π6 and adding a full turn gives the same negative sine.
  6. Draw an upward-opening curved branch through (π2,1), and a downward-opening curved branch through (3π2,−1), approaching their boundary lines.As sine approaches zero from the branch's sign, the reciprocal magnitude grows without bound. Neither branch enters −1 < y < 1.
Answer
  • Asymptotes in the interval: x = 0, π, 2π.
  • Positive branch: 0 < x < π, vertex (π2, 1).
  • Negative branch: π < x < 2π, vertex (3π2, −1).
  • Repeat the pattern every 2π.
Double-check Independent symmetry check: the point (π6, 2) turns about the origin into (−π6, −2). Adding the period 2π gives (11π6, −2), which matches the negative branch. Both vertices have magnitude 1, so the range check also agrees.

The trap

taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.

Quick check

Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 4

A positive fraction moves outward

You need the output at a sine height of one half. Evaluate csc(π6) and locate its point.

Show the steps and the answer
(π/6, 2)π/2π123
y = csc x, solid, beside y = sin x, dashed, with the point (π/6, 2), for y from −0.5 to 3.
  1. Use sin(π6)=12.The 30° unit-circle vertical coordinate is one half.
  2. Compute 1÷12=1×21=2.Dividing by a fraction means multiplying by its reciprocal.
  3. Plot (π6,2), above the vertex's height of 1.The positive reciprocal height stays positive and moves farther from the x-axis.
Answer
  • csc(π6) = 2.
  • Point: (π6, 2).
Double-check Multiplication check: 12 × 2 = 1. The height 2 also fits the positive range y ≥ 1.

8 Secant: build a reciprocal graph from cosine

about 3 minOpen the full lessonOnly this lesson

The rule

secx=1cosx, with x≠π2+nπ for every integer n.

Its vertical asymptotes are x=π2+nπ, its range is (−∞,−1]∪[1,∞), its period is 2π, and sec(−x)=secx.

How

  1. Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.
  2. Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.
  3. Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.
  4. Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.
  5. Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.

Worked example

Worked example

A full cosine-guided secant period

You need one complete positive branch and one complete negative branch. Sketch y = sec x on −π2 ≤ x ≤ 3π2 using cosine as the guide.

Show the steps and the answer
(0, 1)(π, −1)range−π/2π/2π3π/2−4−224
The same picture, shown 4 times now: y = sec x, solid, beside y = cos x, dashed, for x from −1.8708 to 5.0124.
input xoutput cos x−π/20−π/31/201π/31/2π/202π/3−1/2π−14π/3−1/23π/20
Read the cos x height under its input angle; all inputs in this picture are radians.
input xoutput sec x−π/2undefined−π/3201π/32π/2undefined2π/3−2π−14π/3−23π/2undefined
Read the sec x height under its input angle; all inputs in this picture are radians.
  1. Draw the cosine guide using the cosine fntable visual.The starting heights appear directly below the angle inputs.
  2. Set cosx=0 to locate forbidden inputs: −π2,π2,3π2. Plug them back in: cos(−π2)=cos(π2)=cos(3π2)=0.These values make the secant denominator zero, so each is excluded and receives an asymptote.
  3. Keep (0, 1) and (π,−1).Cosine has heights 1 and −1 there, and their reciprocals have the same values.
  4. Read the columns under −π3 and π3. Change each cosine height 12 to secant height 2.The positive branch lies between −π2 and π2, and these points guide its two sides.
  5. Read the columns under 2π3 and 4π3. Change each cosine height −12 to secant height −2.The negative branch lies between π2 and 3π2, and both support points remain negative. 2π3 = π − π3, so vertical-axis reflection reverses cosine. 4π3 = −2π3 + 2π; reflection across the horizontal axis and a full turn both keep that cosine.
  6. Draw an upward-opening curved branch centered at 0 and a downward-opening curved branch centered at π.Near either boundary the cosine height approaches zero with the branch's sign, so the reciprocal moves away from the x-axis without bound.
Answer
  • Asymptotes in the interval: x = −π2, π2, 3π2.
  • Positive branch: −π2 < x < π2, vertex (0, 1).
  • Negative branch: π2 < x < 3π2, vertex (π, −1).
  • The interval length and the repeating pattern are 2π.
Double-check Independent symmetry check: reflecting (π3, 2) across the y-axis gives (−π3, 2), the plotted positive point. Reflecting (π, −1) gives (−π, −1); adding the period 2π returns to (π, −1). The heights also satisfy the two allowed range bands.

The trap

secant uses cosine zeros, which lie at odd multiples of π2. Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.

Quick check

Try it before you open its steps. It is question 2 of 3 in the full lesson, where they run from easy to exam-hard.

Try it · level 2 of 3

The negative branch at and beside its vertex

You need the negative branch's central height and one neighboring height. Evaluate sec π and sec(2π3).

Show the steps and the answer
(π, −1)(2π/3, −2)π/2π3π/2−3−2−1
y = sec x, solid, beside y = cos x, dashed, for x from π/2 to 3π/2.
  1. Use cosπ=−1 and cos(2π3)=−12.The unit-circle horizontal coordinates at 180° and 120° give these exact cosine values.
  2. Compute secπ=1−1=−1.The reciprocal of −1 is −1, locating the negative vertex.
  3. Compute sec(2π3)=1÷(−12)=−2.Dividing one by a negative half gives a negative output of magnitude 2.
  4. Plot (π,−1) and (2π3,−2) below the x-axis.Both inputs lie in the cosine-negative interval (π2, 3π2), so their secant heights are negative.
Answer
  • sec π = −1.
  • sec(2π3) = −2.
Double-check Multiplication checks: (−1) × (−1) = 1 and (−12) × (−2) = 1. The second point is farther below the axis than the vertex, as required.

9 Read, sketch and remember all four graphs

about 10 minOpen the full lessonOnly this lesson

The rule

for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote.

Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.

How

  1. Write the quotient or reciprocal formula.
  2. Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.
  3. Plot the known key points within each allowed branch.
  4. Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.
  5. Repeat by the fundamental period and check the even or odd symmetry and the range.

Worked example

Worked example

Secant: the upward branch through (2π, 1) and its neighbor

Graph the branch of y = sec x that passes through the point (2π, 1), then sketch the neighboring downward branch through (3π, −1). Extend the graph using the period and the even symmetry of secant, and state the range. The three-column table gives exact values on the first branch: sec(7π4) = 2, sec(2π) = 1 and sec(9π4) = 2. The table lists each input as a multiple of π, so 1.75, 2 and 2.25 stand for 7π4, 2π and 9π4, and it shows 2 rounded to 1.414.

Show the steps and the answer
input x (multiple of π)output sec x1.751.414212.251.414↓ evaluate: input given, read the output below it
Three-column table of y = sec x on the branch through (2π, 1).
  1. Write secant as a reciprocal formula: y=secx=1cosx.Secant is the reciprocal of cosine, so each output is 1 divided by cos x. The formula has a value only where its denominator cos x is not 0.
  2. Set the denominator equal to 0: cosx=0 gives x=π2+kπ for any integer k. The two zeros on either side of 2π are x=3π2 and x=5π2. Substitute them back: cos(3π2)=0, and cos(5π2)=cos(π2+2π)=cos(π2)=0.A denominator-zero input is excluded. Just beside it cos x is close to 0, so 1cosx grows without bound, which makes each such vertical line a vertical asymptote. Consecutive zeros are π apart, so no other asymptote lies between 3π2 and 5π2, and these two lines bound the branch through (2π, 1).
  3. Find the allowed outputs of this branch. For 3π2<x<5π2, the angle x−2π is between −π2 and π2, so 0<cosx≤1. Therefore secx=1cosx≥1, and secx=1 only where cosx=1, which is at x=2π.The reciprocal of a positive number no greater than 1 is at least 1. So every point of this branch must lie on or above the line y = 1, and the branch opens upward.
  4. Verify and plot the table points. cos(2π)=1 gives sec(2π)=1. cos(7π4)=22 gives sec(7π4)=22=2≈1.414. cos(9π4)=cos(π4+2π)=22 gives sec(9π4)=2. Plot (2π,1),(7π4,2) and (9π4,2), at x≈6.28, 5.50 and 7.07.Each plotted point must agree with sec x = 1cosx and with the allowed outputs y ≥ 1. The two 2 points sit π4 either side of 2π at the same height, so the branch is symmetric about the line x = 2π.
  5. Draw the upward U. Start high beside x=3π2, fall through (7π4,2) to the lowest point (2π,1), rise through (9π4,2), and climb beside x=5π2 without ever touching either asymptote.From x = 3π2 to x = 2π, cos x increases from 0 to 1, so its reciprocal falls from unbounded values down to 1. From x = 2π to x = 5π2, cos x decreases from 1 toward 0, so sec x increases without bound. Near both asymptotes cos x approaches 0 through positive values, so the outputs head to +∞.
  6. Sketch the neighboring branch. The next zero of cos x is x=7π2, since cos(7π2)=cos(3π2+2π)=0. For 5π2<x<7π2,−1≤cosx<0. cos3π=cos(π+2π)=−1 gives sec3π=−1. cos(11π4)=cos(13π4)=−22 gives sec(11π4)=sec(13π4)=−2. Draw a downward U between x=5π2 and x=7π2 through (11π4,−2), the highest point (3π,−1), and (13π4,−2).The reciprocal of a negative number between −1 and 0 is at most −1, so this branch lies on or below y = −1. Near its asymptotes cos x approaches 0 through negative values, so the outputs fall without bound.
  7. Repeat by the fundamental period 2π. The window from x=3π2 to x=7π2 holds one upward and one downward branch, and copies of it shifted by 2π,4π, … in both directions give the whole graph. For example, shifting the first branch left by 2π gives the upward branch between x=−π2 and x=π2 through (−π4,2), (0, 1) and (π4,2). For integers k, the asymptotes are x=π2+kπ, the lowest points of the upward branches are (2kπ,1), and the highest points of the downward branches are ((2k+1)π,−1).cos(x + 2π) = cos x, so sec(x + 2π) = sec x and every point (x, y) repeats at (x + 2π, y). The period is 2π and not π because sec(x + π) = −sec x, so a shift of π carries an upward branch onto a downward one.
  8. Check the even symmetry. sec(−x)=1cos(−x)=1cosx=secx, so the graph is symmetric about the y-axis. The mirror image of (7π4,2) is (−7π4,2), and cos(−7π4)=22 gives sec(−7π4)=2. The period gives the same value: −7π4=9π4−4π, and sec(9π4)=2.Even symmetry pairs each point (x, y) with (−x, y). The paired point agrees with both the formula and the period, so the extended graph is consistent. The copy through (0, 1) is its own mirror image.
  9. State the range. Wherever sec x is defined, either 0<cosx≤1, giving secx≥1 (the upward branches), or −1≤cosx<0, giving secx≤−1 (the downward branches). The range is (−∞,−1]∪[1,∞).cos x always lies between −1 and 1, so no output of sec x lies strictly between −1 and 1. The values 1 and −1 are reached at x = 2π and x = 3π, and the branches climb or fall without bound near the asymptotes.
Answer
The branch through (2π, 1) is an upward U between the vertical asymptotes x = 3π2 and x = 5π2. Its lowest point is (2π, 1), and it passes through (7π4, 2) and (9π4, 2). Beside it is a downward U between x = 5π2 and x = 7π2 with highest point (3π, −1). The graph repeats every 2π, has vertical asymptotes x = π2 + kπ for every integer k, and is symmetric about the y-axis because sec(−x) = sec x. The range is (−∞, −1] ∪ [1, ∞).
Double-check Test an input that is not in the table. x = 11π6 lies between 7π4 and 2π, and cos(11π6) = 32, so sec(11π6) = 23 = 233 ≈ 1.155. This lies between 1 and 2 ≈ 1.414, as the falling left half of the U requires. Just right of the asymptote, x = 3π2 + 0.01 gives cos x = sin 0.01 ≈ 0.0100 and sec x ≈ 100, a very large positive output. The pair (7π4, 2) and (−7π4, 2) agrees with both the even symmetry and the period 2π. Every plotted output (1, 2, −1 and −2) satisfies y ≥ 1 or y ≤ −1.

Work to write

  1. sec x = 1cosx
  2. cos x = 0 gives x = π2 + kπ; check: cos(3π2) = 0 and cos(5π2) = 0
  3. Vertical asymptotes of the branch: x = 3π2 and x = 5π2
  4. sec(2π) = 1, sec(7π4) = 22 = 2, sec(9π4) = 2
  5. Upward U with lowest point (2π, 1); sec x ≥ 1 on this branch
  6. Downward U between x = 5π2 and x = 7π2 with highest point (3π, −1)
  7. Period 2π: sec(x + 2π) = sec x; asymptotes x = π2 + kπ
  8. Even: sec(−x) = sec x, so sec(−7π4) = 2
  9. Range: (−∞, −1] ∪ [1, ∞)

The trap

Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.

10 Quick checks for the whole unit

8 questions

Quick check 1 of 8

Where are the vertical asymptotes of y = cot x?

Show the steps and the answer
Answer
x = nπ for any integer n: …, −π, 0, π, 2π, …. Sine is zero there, so cotangent's denominator vanishes.

Quick check 2 of 8

Which of the four functions are odd?

Show the steps and the answer
Answer
  • Tangent, cotangent and cosecant. Each reverses its output when the input changes sign
  • secant keeps the output and is even.

Quick check 3 of 8

What is the range of y = sec x?

Show the steps and the answer
Answer
(−∞, −1] ∪ [1, ∞). The reciprocal of a nonzero cosine between −1 and 1 has size at least 1.

Quick check 4 of 8

Why does y = tan x have no amplitude?

Show the steps and the answer
Answer
Amplitude is a finite half-height between a highest and lowest output. Tangent has neither extreme because its range is all real numbers.

Quick check 5 of 8

Is cot(π2) zero or undefined?

Show the steps and the answer
Answer
Zero: cos(π2) = 0 and sin(π2) = 1, so cot(π2) = 01 = 0. The zero is only on the top.

Quick check 6 of 8

What does a vertical asymptote tell you?

Show the steps and the answer
Answer
At least one side has output magnitudes that grow without bound as the input approaches that line. For these four parents the line's input itself is undefined.

Quick check 7 of 8

What are the fundamental periods of tangent and cosecant?

Show the steps and the answer
Answer
  • Tangent: π, because two coordinate sign changes cancel.
  • Cosecant: 2π, because one denominator sign change after π reverses its output.

Quick check 8 of 8

Does secant's range include −1? Does it include 0?

Show the steps and the answer
Answer
  • −1 is included because sec π = −1.
  • 0 is excluded because a nonzero cosine reciprocal cannot equal zero.