Quarry School

Inverse values on a calculator, and why one answer is not all the answers

Subject: MathematicsLeans on: Signs by quadrantLeans on: sin⁻¹ means the inverse, not 1 overLeans on: Rounding to a decimal placeLeans on: Reading [0, 2π)Leans on: Reference angleLeans on: Principal valuesLeans on: A full turn lands on the same point
Level 2 · BuildingAbout 28 min read4 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Picture a Ferris wheel.

    Rule

    The sin⁻¹, cos⁻¹ and tan⁻¹ keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin⁻¹ k in [−π2, π2], cos⁻¹ k in [0, π], tan⁻¹ k in (−π2, π2), named in the units the mode is set to.
    On [0, 2π), sin t = k and cos t = k have two solutions when −1 < k < 1, one when k = 1 or k = −1, and none when k < −1 or k > 1; tan t = k has two for every k. With the reference angle α = the key pressed on |k|, the solutions are the angles among α, π − α, π + α and 2π − α (in degrees α, 180° − α, 180° + α, 360° − α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0, 2π) that solves the equation (sin t = 0 at 0 and π, cos t = 0 at π2 and 3π2, tan t = 0 at 0 and π).

    Step

    1. Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.

    2. Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is π2; degree mode shows 90.

    3. Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.

    4. Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.

    5. Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.

    6. Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.

    Strategy

    1. Read the units and set the mode: π or [0, 2π) means radians, a degree sign means degrees. Test with sin⁻¹(1).

    2. For sine or cosine, check that −1 ≤ k ≤ 1. If k is outside, write no solution and stop.

    3. Find the reference angle α: press the inverse key on |k|, the number without its minus sign. Keep every digit.

    4. Name the two quadrants from the sign of k, using All Silver Tea Cups. If k is 0, or 1 or −1 for sine or cosine, there are no quadrants to name: the answers sit on the axes.

    5. Write each answer from α: Quadrant I, α; Quadrant II, π − α; Quadrant III, π + α; Quadrant IV, 2π − α (in degrees 180° − α, 180° + α, 360° − α). When k is 0, or 1 or −1 for sine or cosine, the answers sit on the axes: keep each different angle among α, π − α, π + α and 2π − α that lies in [0, 2π) and solves the equation.

    6. If the answers came from the key, round only now and write ≈; exact answers keep =. Check: press sin, cos or tan of each answer and see k, up to rounding.

    Question

    Solve tan θ = 1.8 on [0°, 360°). Round each answer to the nearest tenth of a degree.

    Answer

    θ ≈ 60.9° or θ ≈ 240.9°

    Trap

    The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
    The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.

    Term

    restricted domain

    Definition

    A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.

    Term

    inverse function

    Definition

    The function that runs another one backward: if f sends a to b, the inverse f−1 sends b back to a. Its graph is the mirror image across the line y = x.

    Term

    principal value

    Definition

    The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.

    Term

    reference angle

    Definition

    The angle between an angle's ending side and the nearest part of the x-axis, always from 0 to π2. Angles with the same reference angle share the same trig values, up to sign.

    1 In plain words

    Picture a Ferris wheel. In every turn your seat passes each height between the bottom and the top twice: once on the way up and once on the way down. The top and the bottom themselves come once. Ask a careful friend when your seat was 0.6 of the way from the center up to the top, and you hear both moments. Ask your calculator and you hear one, the moment on the way up, because its sin⁻¹ key was built to give a single answer, the principal value. So the calculator is a quick helper with two habits you must manage. It speaks degrees or radians, and you choose which before you ask. It always gives one answer, so when a question wants every angle in a full turn, you find the twin yourself.

    2 Picture it

    0.6435: the calculator2.4981: the twinπ/2π3π/22π−110.6435: the calculator2.4981: the twinπ/2π3π/22π−11
    The dashed level line y = 0.6 crosses one turn of the sine wave twice.

    Reminder

    Reminder: Signs by quadrant, sin⁻¹ means the inverse, not 1 over, Rounding to a decimal place, Reading [0, 2π), Reference angle, Principal values, A full turn lands on the same point
    • Signs by quadrant. All Silver Tea Cups: all three positive in Quadrant I, Sine in II, Tangent in III, Cosine in IV. Example: a point in Quadrant III has negative sine and negative cosine, so its tangent is positive.
    • sin⁻¹ means the inverse, not 1 over. sin⁻¹(0.6) is the angle whose sine is 0.6, about 0.6435. The number 1sin(0.6) is a different thing, about 1.7710.
    • Rounding to a decimal place. Look at the first digit you drop: 5 or more, raise the last kept digit by one; 4 or less, leave it. To four decimal places 2.4980915 becomes 2.4981; to the nearest tenth 14.4775 becomes 14.5.
    • Reading [0, 2π). The square bracket keeps 0; the round bracket leaves out 2π, which lands on the same point as 0. So each point of the circle is counted once: 0 ≤ t < 2π.
    • Reference angle. The angle from 0 to π2 between the terminal side and the x-axis: acute off the axes, and 0 or π2 for an angle on an axis. Example: 5π6 has reference angle π − 5π6 = π6.
    • Principal values. sin⁻¹ answers in [−π2, π2], cos⁻¹ in [0, π], tan⁻¹ in (−π2, π2). Example: cos⁻¹(−12) = 2π3, an angle past π2, while sin⁻¹(−12) = −π6, a negative angle.
    • A full turn lands on the same point. Adding 2π (or 360°) brings an angle back to the same point of the circle. Example: −0.4115 + 2π ≈ 5.8717.

    3 Why

    A key must print one number, so sin⁻¹ is the inverse function of sine on its restricted domain [−π2, π2]: the inverse sine, giving one principal value. The equation sin t = 0.6 asks for more: every angle in a full turn with sine 0.6. Sine is the height of a point on the unit circle, and a level line at height 0.6 cuts the circle twice, at mirror images across the vertical axis. The mirror of α stops α short of a half turn: π − α. The mode matters because one angle has two names, 36.87° and 0.6435 radians, and the calculator prints the name its mode asks for.

    4 The rule

    The sin−1,cos−1 and tan−1 keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin−1 k in [−π2,π2],cos−1 k in [0,π],tan−1 k in (−π2,π2), named in the units the mode is set to.

    On [0,2π),sint=k and cost=k have two solutions when −1<k<1, one when k=1 or k=−1, and none when k<−1 or k > 1; tant=k has two for every k. With the reference angle α= the key pressed on |k|, the solutions are the angles among α,π−α,π+α and 2π−α (in degrees α,180°−α,180°+α,360°−α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0,2π) that solves the equation (sint=0 at 0 and π,cost=0 at π2 and 3π2,tant=0 at 0 and π).

    The same idea, five ways

    Say it

    Sine of t equals 0.6 on one full turn has two answers: the one the calculator shows, about 0.64, and its twin, pi minus that, about 2.50.

    Write it

    The calculator gives only the principal value, sin⁻¹(0.6) ≈ 0.6435; the equation sin t = 0.6 on [0, 2π) has two solutions, that value and π − sin⁻¹(0.6) ≈ 2.4981.

    In math
    • sin t = 0.6 and 0 ≤ t < 2π
    • t = sin⁻¹(0.6) or t = π − sin⁻¹(0.6)
    • t ≈ 0.6435 or t ≈ 2.4981
    • {t | sin t = 0.6 and 0 ≤ t < 2π} = {sin⁻¹(0.6), π − sin⁻¹(0.6)}
    Like

    A Ferris wheel seat passes each height strictly between its lowest and highest points twice per turn, going up and coming down; the calculator reports only the trip up.

    See it
    x = cos θy = sin θt ≈ 2.4981, height 0.6
    The twin the calculator never shows: the same height 0.6, mirrored into Quadrant II.

    The same idea, other ways

    As a picture

    On the unit circle, sine is the height of the point. Draw a level line at height 0.6. It cuts the circle at two points: one in Quadrant I, at t ≈ 0.6435, and its mirror image across the vertical axis in Quadrant II, at t ≈ 2.4981. The calculator shows only the Quadrant I point.

    x = cos θy = sin θt ≈ 0.6435
    The calculator's point sits at height 0.6 in Quadrant I.
    As a story

    On a day when the sun rises and sets, it climbs to one midday peak and sinks again, so it passes each height between the horizon and that peak twice, once in the morning and once in the afternoon, about equally far from the moment it is highest; the peak itself comes only once. A friend who only ever thinks about mornings tells you the morning time and stops. The calculator is that friend. You supply the afternoon time yourself, by mirroring across the middle of the day.

    With numbers

    Press sin(0.6435) and sin(2.4981): both show about 0.6. Two different angles, one sine. The sin⁻¹ key can print only one number, and it prints 0.6435 because only that one lies in its range, [−π2, π2], which runs from about −1.5708 to 1.5708.

    As a rule of thumb

    One key press, one answer. One full turn, two answers: for sine and cosine when the number is strictly between −1 and 1, and for tangent always. When a question says [0, 2π), check the number first: strictly between −1 and 1, or any number for tangent, means two answers, so go find the second; 1 or −1 means one; past them, none.

    The mode, as a story

    A thermometer can show one temperature as 68 in Fahrenheit or 20 in Celsius. An angle works the same way: sin⁻¹(0.6) prints about 36.87 in degree mode and about 0.6435 in radian mode, two names for one angle. The mode switch decides which name the calculator prints, and the calculator cannot guess which name your question wants.

    Equation on [0, 2π)The key on k showsQuadrants of the answersThe two answers, with α = the key on |k|
    sin t = k, 0 < k < 1α, in Quadrant II and IIα and π − α
    sint=k,−1<k<0−α, a negative angleIII and IVπ + α and 2π − α
    cos t = k, 0 < k < 1α, in Quadrant II and IVα and 2π − α
    cost=k,−1<k<0π − α, in Quadrant IIII and IIIπ − α and π + α
    tan t = k, k > 0α, in Quadrant II and IIIα and π + α
    tan t = k, k < 0−α, a negative angleII and IVπ − α and 2π − α

    5 How

    1. Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
    2. Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is π2; degree mode shows 90.
    3. Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
    4. Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
    5. Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
    6. Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.

    Every solution of sin t = k, cos t = k or tan t = k on [0, 2π)

    1
    Does the question use π, say radians, or give the interval [0, 2π)?
    YesSet radian mode.
    NoIf it uses a degree sign, as in [0°, 360°), set degree mode.
    ↓
    2
    Is it sin t = k or cos t = k with k < −1 or k > 1?
    YesNo solution: no point of the unit circle has that height or that left-right position, and the calculator usually shows an error. Stop.
    NoGo on.
    ↓
    3
    Is it sin t = k or cos t = k with k = 1 or k = −1?
    YesOne answer only, because the point and its mirror image are the same point: sin t = 1 gives π2, sin t = −1 gives 3π2, cos t = 1 gives 0, cos t = −1 gives π.
    NoExpect two answers. Go on.
    ↓
    4
    Is |k| a special value from the unit circle, such as 12, 22 or 32 (for tangent: 33, 1 or 3)?
    YesUse the exact reference angle from the unit circle, such as π6 when sin t = 12 (for cos t = 12 it is π3), and give exact answers; the calculator is not needed.
    NoPress the inverse key on |k| to get α, keeping every digit.
    ↓
    5
    Is k negative?
    YesThe answers lie where the function is negative: sine in III and IV, cosine in II and III, tangent in II and IV. For sine or cosine with k = −1 there is one answer, on an axis: 3π2 for sine, π for cosine.
    NoThe answers lie where the function is positive: sine in I and II, cosine in I and IV, tangent in I and III. When k is 0, or 1 for sine or cosine, the answers sit on the axes: keep each different angle among α, π − α, π + α and 2π − α that lies in [0, 2π) and solves the equation.
    1. Read the units and set the mode: π or [0, 2π) means radians, a degree sign means degrees. Test with sin⁻¹(1).
    2. For sine or cosine, check that −1 ≤ k ≤ 1. If k is outside, write no solution and stop.
    3. Find the reference angle α: press the inverse key on |k|, the number without its minus sign. Keep every digit.
    4. Name the two quadrants from the sign of k, using All Silver Tea Cups. If k is 0, or 1 or −1 for sine or cosine, there are no quadrants to name: the answers sit on the axes.
    5. Write each answer from α: Quadrant I, α; Quadrant II, π − α; Quadrant III, π + α; Quadrant IV, 2π − α (in degrees 180° − α, 180° + α, 360° − α). When k is 0, or 1 or −1 for sine or cosine, the answers sit on the axes: keep each different angle among α, π − α, π + α and 2π − α that lies in [0, 2π) and solves the equation.
    6. If the answers came from the key, round only now and write ≈; exact answers keep =. Check: press sin, cos or tan of each answer and see k, up to rounding.

    6 Worked example

    Worked example

    Solving tan θ = 1.8 on [0°, 360°): the key gives one angle, and the second is 180° later

    Solve tan θ = 1.8 on [0°, 360°). Round each answer to the nearest tenth of a degree.

    Show the steps and the answer
    P
    Unit circle with P at about 240.9°.
    1. Read the units. The interval [0°,360°) has a degree sign, so set the calculator to degree mode in its mode or setup menu.The inverse keys answer in whatever units the mode is set to. In radian mode tan⁻¹(1.8) would show 1.063697822, which is a radian measure, but the question asks for degrees.
    2. Test the mode with one press: sin−1(1). The screen shows 90.90 is the degree measure of the angle whose sine is 1, so the mode is right. If the screen showed 1.570796327, which is π2, the calculator would still be in radian mode.
    3. Count the solutions before computing. On [0°,360°),tanθ=k has two solutions for every k, so tanθ=1.8 has two, even though 1.8 > 1.Sine and cosine stay between −1 and 1, so sin θ = 1.8 would have no solution. Tangent takes every real value. The key shows only one angle, so the work is not finished when the screen gives its answer.
    4. Press SHIFT (or 2nd) and then tan to get tan−1. Type (1.8) and press enter. The screen shows 60.9453959. Call this angle α.tan⁻¹ is printed above tan as a second function. The x⁻¹ key is a different key: it would give 11.8 ≈ 0.5555555556, which is a reciprocal, not an angle. Because 1.8 is positive, the principal value is also the reference angle, α = tan⁻¹(|k|).
    5. Pick the quadrants. tanθ>0 in Quadrants I and III, so the solutions are θ=α and θ=180°+α.For the point (x, y) on the unit circle, tan θ = yx. This is positive when x and y have the same sign, which happens in Quadrants I and III. Of α, 180° − α, 180° + α and 360° − α, only α and 180° + α lie in those quadrants. The angle 180° − α is in Quadrant II, where tan θ = −1.8.
    6. Right after the α line, type 180+ Ans. The screen shows 240.9453959.Ans holds every digit of α, so no rounding enters from retyping. The key alone can never show this angle, because tan⁻¹ answers only between −90° and 90°. The point at 180° + α is directly opposite the point at α. Its coordinates are (−x, −y), and −y−x = yx = 1.8.
    7. Round only now, to the nearest tenth of a degree: θ≈60.9° and θ≈240.9°.The question asks for tenths. In both unrounded values the hundredths digit is 4, so both round down. Rounding once, at the end, keeps the answers accurate, and ≈ shows that they are rounded.
    Answer
    θ ≈ 60.9° or θ ≈ 240.9°
    Double-check Both answers lie in [0°, 360°): 60.9° is in Quadrant I and 240.9° is in Quadrant III. They differ by exactly 180°, the period of tangent. In degree mode, tan(60.9453959) and tan(240.9453959) each show 1.8. For contrast, the Quadrant II candidate 180° − α gives tan(119.0546041) = −1.8, so it is not a solution. Testing the rounded angles is only approximate: tan 60.9° ≈ 1.7966, a little under 1.8, because tangent climbs steeply near 61°. That is why the check uses the unrounded values.

    Work to write

    1. Degree mode: sin⁻¹(1) shows 90
    2. tan θ = k has two solutions on [0°, 360°) for every k
    3. α = tan⁻¹(1.8) ≈ 60.9453959°
    4. tan θ > 0 in Quadrants I and III, so θ = α or θ = 180° + α
    5. 180° + α ≈ 240.9453959°
    6. θ ≈ 60.9° or θ ≈ 240.9°

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 7

    Rung 1: almost trivial, reading the mode from one key press

    You press sin⁻¹(1) and the screen shows 90. Which mode is the calculator in, and what would the screen show in the other mode?

    Show the steps and the answer
    x = cos θy = sin θsine 1 at the top
    Sine is 1 only at the top of the circle, a quarter turn: 90° or about 1.5708 radians.
    1. Say what it asks: sin−1(1) is the angle in [−π2,π2] whose sine is 1. The number on the screen names that angle in the calculator's current units.The angle itself never changes; only its name changes with the mode, so the number reveals the mode.
    2. Find the angle: sine is 1 only at the top of the unit circle, a quarter turn from the start.Sine is the height of the point, and the highest point of a circle of radius 1 has height 1.
    3. Name a quarter turn both ways: 90° in degrees, π2≈1.570796327 in radians.A full turn is 360° or 2π, and a quarter of each is 90° or π2.
    4. The screen shows 90, so the calculator is in degree mode.In radians a quarter turn is about 1.57, nowhere near 90.
    Answer
    • Degree mode.
    • In radian mode the screen would show 1.570796327, which is π2.
    Double-check Still in degree mode, press sin(90): the screen shows 1, so 90° really has sine 1. Press π ÷ 2: the screen shows 1.570796327, the radian name of the same quarter turn.

    Rung 2 of 7

    Rung 2: one key press, rounded two ways

    Find tan⁻¹(2.5) in degrees, rounded to the nearest tenth of a degree, and in radians, rounded to four decimal places.

    Show the steps and the answer
    xyθx = 2y = 5rP(2, 5)Ox = 2 (2 right) y = 5 (5 up) r = √29.0 ≈ 5.4the ray from O through P (and beyond) = the terminal side
    A terminal side through (2, 5) rises 5 for every 2 across: tangent 5 ÷ 2 = 2.5, an angle of about 68.2°.
    1. Say what it asks: the one angle between −90° and 90° whose tangent is 2.5, named first in degrees and then in radians.tan⁻¹(2.5) is one value of the inverse tangent. No interval such as [0, 2π) is given, so no second answer is wanted.
    2. Set degree mode and test: sin−1(1) shows 90. Press tan−1(2.5): the screen shows 68.19859051.The first answer is wanted in degrees, and the key returns the principal value, a Quadrant I angle because 2.5 is positive.
    3. Round to the nearest tenth: 68.2°.In 68.19859051 the digit after the tenths place is 9, which is 5 or more, so the 1 in the tenths place goes up to 2.
    4. Set radian mode and test: sin−1(1) shows 1.570796327. Press tan−1(2.5): the screen shows 1.19028995.It is the same angle, now named in radians.
    5. Round to four decimal places: 1.1903.In 1.19028995 the fifth decimal digit is 8, so the fourth decimal digit, 2, goes up to 3.
    Answer
    • tan⁻¹(2.5) ≈ 68.2°
    • tan⁻¹(2.5) ≈ 1.1903 radians
    Double-check In degree mode press tan(68.2): about 2.5002. In radian mode press tan(1.1903): about 2.5001. Both are 2.5 apart from the rounding. Second way: 1.19028995 × 180 ÷ π ≈ 68.19859, the degree answer before rounding.

    Rung 3 of 7

    Rung 3: two answers for a positive sine, in degrees

    Solve sin θ = 0.25 on [0°, 360°). Round each answer to the nearest tenth of a degree.

    Show the steps and the answer
    x = cos θy = sin θθ ≈ 14.5°
    Quadrant I: height 0.25.
    x = cos θy = sin θθ ≈ 165.5°
    The mirror image in Quadrant II has the same height 0.25.
    1. Say what it asks: every angle θ from 0° up to but not including 360° whose sine is 0.25.A full turn is wanted, so expect two answers.
    2. Set degree mode and test: sin−1(1) shows 90. Check that 0.25 is between −1 and 1.The interval is written in degrees, and a sine between −1 and 1 has angles to find.
    3. Press sin−1(0.25): the screen shows 14.47751219. Call it α.0.25 is positive, so the principal value is a Quadrant I angle: the reference angle.
    4. Sine is positive in Quadrants I and II.The point is above the x-axis there (All Silver Tea Cups: All in I, Sine in II).
    5. Quadrant I: θ=α≈14.47751219°. Quadrant II: θ=180°−α≈165.52248781°.In degrees a half turn is 180°, and the mirror image across the vertical axis stops α short of it.
    6. Round to the nearest tenth: 14.5° and 165.5°.In 14.47751219 the digit after the tenths place is 7, so the 4 goes up to 5. In 165.52248781 that digit is 2, so the 5 stays.
    Answer
    • θ ≈ 14.5°
    • θ ≈ 165.5°
    Double-check In degree mode press sin(14.5) and sin(165.5): both show about 0.2504, which is 0.25 apart from rounding to tenths. Second way: 14.5 + 165.5 = 180, as two positive-sine answers, mirror images across the vertical axis, must add to a half turn.

    Rung 4 of 7

    Rung 4: two answers for a positive cosine, a different mirror

    Solve cos t = 0.3 on [0, 2π). Round each answer to four decimal places.

    Show the steps and the answer
    x = cos θy = sin θt ≈ 1.2661
    Quadrant I: left-right position 0.3.
    x = cos θy = sin θt ≈ 5.0171
    The mirror image across the x-axis, in Quadrant IV, has the same left-right position 0.3.
    1. Say what it asks: every angle t in one full turn, from 0 up to but not including 2π, whose cosine is 0.3.Cosine is the left-right position of the point on the unit circle, and a full turn passes the position 0.3 twice.
    2. Set radian mode and test: sin−1(1) shows 1.570796327. Check that 0.3 is between −1 and 1.The interval uses π, and a cosine between −1 and 1 has angles to find.
    3. Press cos−1(0.3): the screen shows 1.266103673. Call it α.0.3 is positive, so the principal value, which lies in [0, π], is in Quadrant I: it is the reference angle.
    4. Cosine is positive in Quadrants I and IV.The point is right of the vertical axis there (All Silver Tea Cups: Cosine in IV).
    5. Quadrant I: t=α≈1.266103673. Quadrant IV: type 2π−cos−1(0.3), which shows 5.017081634.Mirroring the point across the x-axis keeps its left-right position 0.3, and the mirror stops α short of a full turn: 2π − α. The sine pattern π − α would mirror across the vertical axis and give cosine −0.3.
    6. Round to four decimal places: 1.2661 and 5.0171.In 1.266103673 the fifth decimal digit is 0, so 1.2661 stays. In 5.017081634 the fifth decimal digit is 8, so the 0 before it goes up to 1.
    Answer
    • t ≈ 1.2661
    • t ≈ 5.0171
    Double-check Press cos(1.2661) and cos(5.0171): both show 0.3000 when rounded to four decimal places. Second way: 1.2661 + 5.0171 = 6.2832 ≈ 2π, as two cosine answers, mirror images across the x-axis, must add to a full turn.

    Rung 5 of 7

    Rung 5: a negative sine, where the calculator's answer is outside the interval

    Solve sin t = −0.4 on [0, 2π). Round each answer to four decimal places.

    Show the steps and the answer
    calculator: −0.41153.55315.8717π2π−11
    The calculator's crossing lies left of 0, outside the interval.
    1. Say what it asks: every angle t in one full turn, from 0 up to but not including 2π, whose sine is −0.4, a height below the center.A full turn is wanted, so expect two answers, both below the x-axis.
    2. Set radian mode and test: sin−1(1) shows 1.570796327. Check that −0.4 is between −1 and 1.The interval uses π, and a sine between −1 and 1 has angles to find.
    3. Notice what sin−1(−0.4) shows: −0.4115168461. It is negative, so it is not in [0,2π) at all.The principal value of sin⁻¹ for a negative number is a clockwise angle between −π2 and 0.
    4. Find α from the positive number: sin−1(0.4) shows 0.4115168461.The reference angle is acute and positive, and the key on |k| = 0.4 gives it directly.
    5. Sine is negative in Quadrants III and IV.The point is below the x-axis there; sine is positive only in Quadrants I and II.
    6. Quadrant III: type π+sin−1(0.4), which shows 3.553109500. Quadrant IV: type 2π−sin−1(0.4), which shows 5.871668461.π + α goes α past a half turn, landing below the x-axis on the left; 2π − α stops α short of a full turn, landing below the x-axis on the right.
    7. Round to four decimal places: 3.5531 and 5.8717.In 3.553109500 the fifth decimal digit is 0, so 3.5531 stays. In 5.871668461 the fifth decimal digit is 6, so the 6 before it goes up to 7.
    Answer
    • t ≈ 3.5531
    • t ≈ 5.8717
    Double-check Press sin(3.5531) and sin(5.8717): both show −0.4000 when rounded to four decimal places. Second way: add a full turn to the calculator's own answer: −0.4115168461 + 2π ≈ 5.8717, the Quadrant IV answer.

    Rung 6 of 7

    Rung 6: a negative cosine, where the calculator's answer is not the reference angle

    Solve cos θ = −0.7 on [0°, 360°). Round each answer to the nearest tenth of a degree.

    Show the steps and the answer
    x = cos θy = sin θθ ≈ 134.4°
    Quadrant II: left-right position −0.7, the calculator's own answer.
    x = cos θy = sin θθ ≈ 225.6°
    Quadrant III: the mirror image across the x-axis, the same left-right position −0.7.
    1. Say what it asks: every angle θ from 0° up to but not including 360° whose cosine, the left-right position on the unit circle, is −0.7.A full turn is wanted, so expect two answers, both left of the vertical axis.
    2. Set degree mode and test: sin−1(1) shows 90. Check that −0.7 is between −1 and 1.The interval is in degrees, and a cosine between −1 and 1 has angles to find.
    3. Notice what cos−1(−0.7) shows: 134.427004. It is one answer, but it is not the reference angle, because it is bigger than 90°.The principal value of cos⁻¹ lies in [0°, 180°], and a negative input lands past 90°, in Quadrant II.
    4. Find α from the positive number: cos−1(0.7) shows 45.572996.The reference angle is acute, and the key on |k| = 0.7 gives it directly.
    5. Cosine is negative in Quadrants II and III.The point is left of the vertical axis there (All Silver Tea Cups: cosine is positive only in I and IV).
    6. Quadrant II: θ=180°−α≈180−45.572996=134.427004°. Quadrant III: θ=180°+α≈180+45.572996=225.572996°.180° − α stops α short of a half turn; 180° + α goes α past it. The Quadrant II answer matches the calculator's 134.427004, as it should.
    7. Round to the nearest tenth: 134.4° and 225.6°.In 134.427004 the digit after the tenths place is 2, so 134.4 stays. In 225.572996 that digit is 7, so the 5 goes up to 6.
    Answer
    • θ ≈ 134.4°
    • θ ≈ 225.6°
    Double-check In degree mode press cos(134.4) and cos(225.6): both show about −0.6997, which is −0.7 apart from rounding to tenths. Second way: 134.4 + 225.6 = 360, as two cosine answers must add to a full turn. The tempting move of treating 134.427 as α gives 180 + 134.427 = 314.427°, whose cosine is +0.7, the wrong sign.

    Rung 7 of 7

    Rung 7: the hardest, a negative tangent

    Solve tan t = −2 on [0, 2π). Round each answer to four decimal places.

    Show the steps and the answer
    2.03445.1760π/2π3π/22π−4−224
    The level line y = −2 crosses the tangent graph twice in one turn, at about 2.0344 and 5.1760.
    1. Say what it asks: every angle t in one full turn, from 0 up to but not including 2π, whose tangent is −2.A full turn is wanted, and tan t = k has two answers in a full turn for every k.
    2. Set radian mode and test: sin−1(1) shows 1.570796327. Skip the −1 to 1 check.Tangent is yx, a slope, and a slope can be any real number, so tan t = k always has answers.
    3. Notice what tan−1(−2) shows: −1.107148718. It is negative, so it is outside [0,2π).The principal value of tan⁻¹ lies in (−π2, π2), and a negative input gives a clockwise angle.
    4. Find α from the positive number: tan−1(2) shows 1.107148718.The key on the positive number gives the acute reference angle.
    5. Tangent is negative in Quadrants II and IV.Tangent is yx. In Quadrant II, y is positive and x negative; in Quadrant IV, y is negative and x positive. A positive divided by a negative, or a negative divided by a positive, is negative.
    6. Quadrant II: type π−tan−1(2), which shows 2.034443936. Quadrant IV: type 2π−tan−1(2), which shows 5.176036589.π − α stops α short of a half turn; 2π − α stops α short of a full turn.
    7. Round to four decimal places: 2.0344 and 5.1760.In 2.034443936 the fifth decimal digit is 4, so 2.0344 stays. In 5.176036589 the fifth decimal digit is 3, so 5.1760 stays; write the final 0 to show four places.
    Answer
    • t ≈ 2.0344
    • t ≈ 5.1760
    Double-check Press tan(2.0344) and tan(5.1760): both show about −2.0002, which is −2 apart from rounding. Second way: add a half turn and a full turn to the calculator's own answer: −1.107148718 + π ≈ 2.0344 and −1.107148718 + 2π ≈ 5.1760. A half turn moves the point to the opposite side of the circle, where x and y both change sign and yx stays the same.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: sin t = 0.6 on [0, 2π), so t = sin⁻¹(0.6) ≈ 0.6435, and that is the whole answer.
    The sin⁻¹ key gives one principal value from [−π2, π2]. The question asks for every angle in a full turn, and the height 0.6 is reached twice on the circle.
    ✓ Instead: t ≈ 0.6435 and t = π − sin⁻¹(0.6) ≈ 2.4981.
    ✗ Not this: In degree mode sin⁻¹(0.6) shows 36.86989765, so t ≈ 36.8699 and t ≈ π − 36.8699 ≈ −33.7283.
    36.87 counts degrees and π counts radians, so the subtraction mixes units and lands on a negative number outside [0, 2π). Every radian answer on [0, 2π) lies between 0 and 6.2832.
    ✓ Instead: Switch to radian mode and test with sin⁻¹(1): t ≈ 0.6435 and t ≈ 2.4981.
    ✗ Not this: For sin θ = 0.6 on [0°, 360°) with the calculator in radian mode: θ ≈ 0.6435° and θ ≈ 180° − 0.6435° = 179.3565°.
    0.6435 is a radian number wearing a degree sign. The check exposes it: sin(0.6435°) is about 0.0112, not 0.6.
    ✓ Instead: In degree mode: θ ≈ 36.8699° and θ ≈ 180° − 36.8699° = 143.1301°.
    ✗ Not this: Rounding first: α ≈ 0.64, so the twin is π − 0.64 ≈ 2.5016.
    The 0.0035 dropped at the start rides along into the answer, which comes out 0.0035 too big.
    ✓ Instead: Keep every digit: π − sin⁻¹(0.6) shows 2.498091545, which rounds to 2.4981.
    ✗ Not this: Typing 3.14 for π: 3.14 − 0.6435011088 ≈ 2.4965.
    3.14 is π cut short by about 0.0016, and the answer comes out short by the same amount.
    ✓ Instead: Use the π key: π − 0.6435011088 ≈ 2.4981.
    ✗ Not this: Pressing sin(0.6), then the x⁻¹ key, and reading 1.7710 as sin⁻¹(0.6).
    The x⁻¹ key means 1 over the number, so this computes 1sin(0.6), about 1.7710, which is not an angle with sine 0.6. The inverse sine is the second function printed above the sin key.
    ✓ Instead: Press 2nd (or SHIFT), then sin, then 0.6: radian mode shows 0.6435011088.
    ✗ Not this: For cos t = 0.3 on [0, 2π), copying the sine pattern: t ≈ 1.2661 and t ≈ π − 1.2661 ≈ 1.8755.
    π − α mirrors the point across the vertical axis, which keeps the height but flips the left-right position, so cos(1.8755) ≈ −0.3, the wrong sign.
    ✓ Instead: Cosine mirrors across the x-axis: t ≈ 1.2661 and t = 2π − cos⁻¹(0.3) ≈ 5.0171.
    ✗ Not this: sin⁻¹(1.2) shows an error, so the mode must be wrong and sin t = 1.2 needs another method.
    Sine is a height on a circle of radius 1, so it is never above 1. No angle has sine 1.2, in any mode, and the error is the calculator saying so.
    ✓ Instead: sin t = 1.2 has no solution.
    ✗ Not this: For sin t = 1 on [0, 2π): t = π2 and t = π − π2, two answers.
    π − π2 is π2 again: the top of the circle is its own mirror image.
    ✓ Instead: One answer: t = π2.

    Tips and tricks

    • One-press mode test: sin⁻¹(1) shows 90 in degree mode and 1.570796327 in radian mode. Do it every time you pick up the calculator.
    • Size check: answers on [0, 2π) lie between 0 and 6.2832, and answers on [0°, 360°) between 0 and 360. A radian answer like 36.87 means the calculator is in degree mode.
    • Twin check: two cosine answers always add to 2π (360°); two tangent answers always differ by π (180°); two sine answers add to π (180°) when k is positive and to 3π (540°) when k is negative.
    • Memory cue for the four positions, going around from Quadrant I: α, then half minus (π − α), half plus (π + α), full minus (2π − α).
    • Press the inverse key on the positive number |k| every time. The result is always the reference angle, an angle from 0 to π2, which keeps the quadrant rule the same for sine, cosine and tangent.
    • What to write down: the reference angle, the quadrants with the reason, and every answer: with = when it is exact, such as t = 5π6, and with ≈ and the rounding place when it is rounded, such as t ≈ 2.4981 (four decimal places).

    7 The trap

    The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
    The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.

    Flash cards

    Say the answer out loud, then flip.

    Why does the sin⁻¹ key show only one angle?
    A key must print one number, so sin⁻¹ gives the principal value: the one angle in [−π2, π2] with that sine. When a question wants every angle in a full turn, you find the second one yourself when there is one: an input of 1 or −1 has only one angle per turn.
    What one press tells you whether the calculator is in degrees or radians?
    • Press sin⁻¹(1).
    • Radian mode shows 1.570796327, which is π2.
    • Degree mode shows 90.
    On [0, 2π), how many solutions does sin t = k have?
    • Two when −1 < k < 1: a level line at height k cuts the unit circle twice.
    • One when k = 1 or k = −1: the line touches the circle only at the top or the bottom.
    • None when k < −1 or k > 1: the line misses the circle.