Quarry School

The inverse sine

Subject: MathematicsLeans on: Sine is a heightLeans on: The five special sinesLeans on: Negative angles turn clockwiseLeans on: Coterminal anglesLeans on: Radians to degreesLeans on: Square brackets include the endLeans on: Sizing up a rootLeans on: RationalizingLeans on: Adding fractions of π
Level 1 · FoundationsAbout 19 min read3 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Sine takes an angle and gives back a height.

    Rule

    y = arcsin x, also written y = sin−1 x, means sin y = x and −π2 ≤ y ≤ π2.
    Domain: [−1, 1]. Range: [−π2, π2], which is −90° to 90°.

    Step

    1. Turn the question into a sine question: y = arcsin x asks for the angle y from −π2 to π2 with sin y = x. The input x is a height; the answer y is an angle.

    2. Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.

    3. Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.

    4. Check the answer: it lies between −π2 and π2, and its sine gives back x.

    Strategy

    1. Check that −1 ≤ x ≤ 1. If not, write undefined and stop.

    2. Drop the sign of x for now. If the positive version looks unfamiliar, rewrite it: 0.5 = 12, 12 = 22.

    3. Name the angle from 0 to π2 with that sine: sin 0 = 0, sin π6 = 12, sin π4 = 22, sin π3 = 32, sin π2 = 1.

    4. Put the sign back. If x is positive or 0, the angle from the last step is the answer. If x is negative, the answer is that angle with a minus sign: the same turn made clockwise, which lands below the x-axis where heights are negative.

    5. Check: the answer lies between −π2 and π2, and its sine equals x.

    Question

    Evaluate arcsin(−32) exactly.

    Answer

    arcsin(−32) = −π3, which is −60°

    Trap

    Answering with an angle outside the range. For arcsin(−12) it is tempting to write 7π6 or 11π6: both have sine −12, but neither lies between −π2 and π2. The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −π6. Before you write any arcsin answer, check that it lies in that stretch.

    Term

    one-to-one function

    Definition

    A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion.

    Term

    horizontal line test

    Definition

    A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands.

    Term

    restricted domain

    Definition

    A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.

    Term

    inverse function

    Definition

    The function that runs another one backward: if f sends a to b, the inverse f−1 sends b back to a. Its graph is the mirror image across the line y = x.

    Term

    principal value

    Definition

    The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.

    1 In plain words

    Sine takes an angle and gives back a height. Picture a Ferris wheel with radius 1. Your seat starts level with the hub, on the right. Turn the wheel through an angle, and sine tells you your height: above the hub is positive, below is negative. The inverse sine asks the reverse question: your seat is at height 12, so how far did the wheel turn? The catch: every lap passes that height twice, once rising and once falling. So everyone agrees to use only the right side, from straight down to straight up, counting a downward turn as negative. There, each height from −1 to 1 shows up exactly once. That one angle is the answer, called the principal value.

    2 Picture it

    x = cos θy = sin θπ/6
    arcsin(12) = π6: on the right half of the circle, the point at height 12 sits at the angle π6.

    Reminder

    Reminder: Sine is a height, The five special sines, Negative angles turn clockwise, Coterminal angles, Radians to degrees, Square brackets include the end, Sizing up a root, Rationalizing, Adding fractions of π
    • Sine is a height. On the unit circle, sin θ is the y-coordinate, the height, of the point at angle θ. Example: the point at π2 is (0, 1), so sin π2 = 1.
    • The five special sines. sin 0 = 0, sin π6 = 12, sin π4 = 22, sin π3 = 32, sin π2 = 1. Memory device: the tops count 0, 1, 2, 3, 4, always over 2.
    • Negative angles turn clockwise. −π6 is a 30° turn clockwise from the positive x-axis. It lands at the mirror image of the π6 point across the x-axis: same distance across, opposite height, so sin(−π6) = −12.
    • Coterminal angles. Angles that differ by a full turn, 360° or 2π, end at the same point and have the same sine. Example: −60° + 360° = 300°, so −π3 and 5π3 name one point.
    • Radians to degrees. π = 180°, so divide 180° by the bottom: π6 = 30°, π4 = 45°, π3 = 60°, π2 = 90°.
    • Square brackets include the end. [−1, 1] means every number from −1 to 1, both ends included. Example: 1 is in it, 1.5 is not.
    • Sizing up a root. 2 ≈ 1.414 and 3 ≈ 1.732, so 22 ≈ 0.707 and 32 ≈ 0.866: both between 0 and 1.
    • Rationalizing. 12 = 12 · 22 = 22. Multiplying by 22, which is 1, changes the look, not the value.
    • Adding fractions of π. Give both the same bottom first: −π3 + π6 = −2π6 + π6 = −π6.

    3 Why

    An inverse must give one answer, and sine repeats, so we use sine only on its restricted domain [−π2, π2]. There sine climbs from −1 to 1 and passes the horizontal line test: each height comes from exactly one angle, so the reverse is a function. This piece is a convention, chosen because it holds the first-quadrant angles and is centered at 0, so the answer for −12 is the answer for 12 with a minus sign. If everyone picked a different piece, answers would disagree. The domain is [−1, 1] because no point on the unit circle sits above 1 or below −1.

    4 The rule

    y= arcsin x, also written y=sin−1 x, means siny=x and −π2≤y≤π2.

    Domain: [−1,1]. Range: [−π2,π2], which is −90° to 90°.

    The same idea, five ways

    Say it

    Say “y is the inverse sine of x” or “y is the arcsine of x” (ARK-sine). Read sin−1 x aloud as “inverse sine of x”, not “sine to the minus one”.

    Write it

    y is the angle from −π2 to π2, ends included, whose sine is x.

    In math
    • y = arcsin x
    • y = sin−1 x, the same thing; the −1 is a label, not a power
    • sin y = x and −π2 ≤ y ≤ π2
    • domain: −1 ≤ x ≤ 1, that is [−1, 1], that is {x | −1 ≤ x ≤ 1}
    • range: −π2 ≤ y ≤ π2, that is [−π2, π2], or −90° ≤ y ≤ 90° in degrees
    • graph: the piece of y = sin x from (−π2, −1) to (π2, 1), mirrored across the line y = x; it rises from (−1, −π2) through (0, 0) to (1, π2)
    Like

    A Ferris wheel of radius 1: from your seat's height, say how far the wheel turned, counting only the right side, from straight down to straight up.

    See it
    1/2arcsin: which anglefrom −π/2 to π/2 hasthis sine?inputoutputπ/6
    A height goes in and an angle comes out: the sine machine run backward.

    The same idea, other ways

    As a picture

    Draw the unit circle and cover its left half. What remains runs from the bottom, at −π2, through the right end, at 0, up to the top, at π2. Climbing this half, the height rises from −1 to 1 and passes each value once. To find arcsin x, slide along the half to the point at height x and read its angle: positive above the x-axis, negative below.

    x = cos θy = sin θ−π/6
    On the right half, the height −12 belongs to −π6, a 30° turn clockwise.
    As a story

    The hour hand of a clock points at 3 at three in the morning, at three in the afternoon, and again every day after. Told only that the hand points at 3, you cannot know which time it was, so people agree on a rule: give this morning's time. The inverse sine works the same way. Many angles have sine 12: π6, 5π6, 13π6 and more. The rule “give the angle from −π2 to π2” picks π6. That chosen answer is the principal value.

    30°390°same terminal side
    30° and 390° end at the same point, so they share the sine 12; the inverse sine names only 30°, which is π6.
    With small numbers

    Read sine facts backward, keeping only angles from −π2 to π2. In the table, the top row holds heights and the bottom row holds angles. The highlighted column under 12 says arcsin(12) = π6, because sin π6 = 12. The column under −12 holds −π6: same size, opposite sign. The two end columns are the bottom and the top of the circle.

    input xoutput arcsin x−1−π/2−1/2−π/6001/2π/61π/2↓ evaluate: input given, read the output below it
    Each column pairs a height with the one angle in the range that has it.
    As a rule of thumb

    Input between 0 and 1: the angle is in the first quadrant. Input between −1 and 0: the angle is in the fourth quadrant, written as a negative angle such as −π6, never as 11π6. Zero in, zero out; 1 in, π2 out, straight up; −1 in, −π2 out, straight down. The answer is never in the second or third quadrant, because those make up the left half of the circle. An input above 1 or below −1 has no answer at all.

    QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
    Sine is positive in quadrants I and II and negative in III and IV.
    Why it must be true

    A machine can be run backward only if each output came from exactly one input; otherwise, handed an output, you could not say which input made it. Sine on all angles fails this: π6 and 5π6 both give 12. On the restricted domain from −π2 to π2, sine is a one-to-one function: its heights only go up, so no height repeats. Turn every arrow around and you get a function, the inverse sine. Its inputs are the old outputs, heights from −1 to 1, and its outputs are the old inputs, angles from −π2 to π2.

    −π/2−π/60π/6π/2−1−1/201/21function
    On the restricted domain each angle sends its arrow to a different height.
    x, a heightarcsin xin degreesthe turn from the right end
    −1−π2−90°a quarter turn clockwise
    −32−π3−60°60° clockwise
    −22−π4−45°45° clockwise
    −12−π6−30°30° clockwise
    000°no turn
    12π630°30° counterclockwise
    22π445°45° counterclockwise
    32π360°60° counterclockwise
    1π290°a quarter turn counterclockwise

    5 How

    1. Turn the question into a sine question: y = arcsin x asks for the angle y from −π2 to π2 with sin y = x. The input x is a height; the answer y is an angle.
    2. Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.
    3. Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.
    4. Check the answer: it lies between −π2 and π2, and its sine gives back x.

    Exact values of arcsin x

    1
    Is x between −1 and 1, ends included?
    YesGo on.
    NoStop: arcsin x is undefined, because no point on the unit circle is that high or that low.
    ↓
    2
    Ignoring its sign, is x a special height: 0, 12, 22, 32 or 1, perhaps in disguise, such as 0.5 or 12?
    YesName the angle from 0 to π2 with that sine, and go on.
    NoThe angle exists but is not a special angle. Leave the exact answer as arcsin x.
    ↓
    3
    Is x negative?
    YesAnswer with the negative of that angle: a clockwise turn into the lower right quarter.
    NoAnswer with the angle itself: it is in the upper right quarter, or it is 0.
    1. Check that −1 ≤ x ≤ 1. If not, write undefined and stop.
    2. Drop the sign of x for now. If the positive version looks unfamiliar, rewrite it: 0.5 = 12, 12 = 22.
    3. Name the angle from 0 to π2 with that sine: sin 0 = 0, sin π6 = 12, sin π4 = 22, sin π3 = 32, sin π2 = 1.
    4. Put the sign back. If x is positive or 0, the angle from the last step is the answer. If x is negative, the answer is that angle with a minus sign: the same turn made clockwise, which lands below the x-axis where heights are negative.
    5. Check: the answer lies between −π2 and π2, and its sine equals x.

    6 Worked example

    Worked example

    An exact value with a negative input

    Evaluate arcsin(−32) exactly.

    Show the steps and the answer
    x = cos θy = sin θ−π/3
    At −π3, a 60° turn clockwise, the point is (12, −32): its height is the input.
    -60°300°same terminal side
    −60° and 300° end at the same point, but only −60°, which is −π3, lies in the range of arcsin.
    1. Say what it asks: the input −32 is a height. Find the one angle from −π2 to π2 whose sine is −32.That is the definition of arcsin: the angle on the right half of the unit circle at the given height.
    2. Check the input: 3≈1.732, so −32≈−0.866, which is between −1 and 1.Heights on the unit circle run from −1 to 1, so this check tells you an answer exists.
    3. Drop the minus sign for a moment. The angle from 0 to π2 with sine 32 is π3, which is 60°.The point at π3 is (12, 32), so its height is 32.
    4. Put the sign back. The height is negative, so the point is below the x-axis on the right half: make the same turn clockwise, −π3.The point at −π3 is the mirror image of the point at π3 across the x-axis: same distance across, opposite height.
    5. Confirm the range: −90°<−60°<90°, so −π3 is between −π2 and π2.arcsin answers only with angles in that stretch, and on a number line −90 sits to the left of −60.
    6. Set aside 4π3 (240°) and 5π3 (300°). Both have sine −32, but both are bigger than π2.4π3 is on the left half; 5π3 is the same point as −π3, reached the long way around, so it is outside the range.
    Answer
    arcsin(−32) = −π3, which is −60°
    Double-check Take the sine of the answer: the point at −π3 is (12, −32), so sin(−π3) = −32, the input. Second way, with the 30-60-90 triangle of hypotenuse 1: the side across from the 60° angle is 32, and at −60° the triangle hangs below the x-axis, so the height is −32.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 7

    Rung 1: the top of the circle

    Evaluate arcsin(1).

    Show the steps and the answer
    x = cos θy = sin θπ/2
    The only point at height 1 is the top of the circle, at π2.
    1. Say what it asks: the input 1 is a height. Find the angle from −π2 to π2 whose sine is 1.arcsin x always means the angle in that stretch whose sine is x.
    2. Check the input: 1 is in [−1,1].The square bracket at 1 means the end itself is allowed.
    3. Find the point at height 1: the top of the circle, (0, 1), a quarter turn counterclockwise, at the angle π2.A circle of radius 1 reaches 1 unit above its center only at the very top.
    4. Confirm the angle is in the range: π2 is the top end of [−π2,π2], and that end is included.The range is written with square brackets too.
    Answer
    arcsin(1) = π2, which is 90°
    Double-check sin π2 is the height of the point (0, 1), which is 1: the input comes back.

    Rung 2 of 7

    Rung 2: a special height above the axis

    Evaluate arcsin(12).

    Show the steps and the answer
    30°60°√31245°45°11√2
    In the 30-60-90 triangle the side across from 30° is half the hypotenuse, which is why sin 30° = 12.
    1. Say what it asks: find the angle from −π2 to π2 whose sine is 12.The input 12 is a height, and arcsin returns the angle on the right half at that height.
    2. Check the input: 12=0.5, which is between −1 and 1.Heights on the unit circle never go above 1 or below −1, so an answer exists.
    3. The input is positive, so look in the upper right quarter. The point at π6 (30°) is (32,12), so its height is 12.In the 30-60-90 triangle with hypotenuse 1, the side across from the 30° angle is 12.
    4. Set aside 5π6 (150°). Its sine is also 12, but it is bigger than π2.5π6 is on the left half of the circle, outside the range, and arcsin gives only the one answer in its range.
    Answer
    arcsin(12) = π6, which is 30°
    Double-check sin π6 = 12, the input, and 30° is between −90° and 90°.

    Rung 3 of 7

    Rung 3: the answer in degrees

    Evaluate arcsin(22) and give the answer in degrees.

    Show the steps and the answer
    x = cos θy = sin θ45°
    At 45° the height and the distance across are equal, both 22.
    1. Say what it asks: find the angle from −90° to 90° whose sine is 22, written in degrees.The range from −π2 to π2 is the same stretch as −90° to 90°, since π = 180°.
    2. Check the input: 2≈1.414, so 22≈0.707, which is between −1 and 1.An answer exists only for heights from −1 to 1.
    3. The input is positive, so look in the upper right quarter. The point at 45° is (22,22), so its height is 22.In the 45-45-90 triangle with hypotenuse 1, each leg is 22.
    4. Write the angle in degrees: 45°.The question asks for degrees; in radians the same angle is π4, since 180° ÷ 4 = 45°.
    Answer
    arcsin(22) = 45°, which is π4 in radians
    Double-check sin 45° = 22, the input, and 45° is between −90° and 90°.

    Rung 4 of 7

    Rung 4: the first negative input

    Evaluate arcsin(−12).

    Show the steps and the answer
    −π/6terminal sideinitial side
    A negative angle is a clockwise turn: −π6 dips 30° below the positive x-axis.
    1. Say what it asks: find the angle from −π2 to π2 whose sine is −12.That is what arcsin means.
    2. Check the input: −12=−0.5, which is between −1 and 1.So an answer exists.
    3. Drop the sign for a moment: the angle from 0 to π2 with sine 12 is π6.The point at π6 is (32, 12).
    4. Put the sign back: the height is negative, so the point is below the x-axis on the right half. Make the same turn clockwise: −π6.The point at −π6 is the mirror image of the point at π6 across the x-axis, so its height is −12.
    5. Set aside 7π6 and 11π6. Both have sine −12, but both are bigger than π2.7π6 is on the left half; 11π6 is the same point as −π6, reached the long way around, and the range allows only the short clockwise name.
    Answer
    arcsin(−12) = −π6, which is −30°
    Double-check The point at −π6 is (32, −12), so sin(−π6) = −12, the input; and −30° is between −90° and 90°.

    Rung 5 of 7

    Rung 5: the inverse notation and a root in the bottom

    Evaluate sin−1(−12).

    Show the steps and the answer
    x = cos θy = sin θ−π/4
    At −π4 the point sits as far below the axis as it sits to the right: height −22.
    1. Read the notation: sin−1 is the inverse sine, arcsin. The question is: which angle from −π2 to π2 has sine −12?The −1 on sin is the inverse label, not a power, so this is not one over sine.
    2. Rewrite the input: 12=12·22=22, so the input is −22.Multiplying by 22, which equals 1, changes the look, not the value, and 2 · 2 = 2. Now the input matches a special height.
    3. Check the input: −22≈−0.707, which is between −1 and 1.So an answer exists.
    4. Drop the sign: the angle from 0 to π2 with sine 22 is π4.The point at π4 is (22, 22).
    5. Put the sign back: −π4.A negative height puts the point below the x-axis on the right half: the same turn, made clockwise.
    Answer
    sin−1(−12) = −π4, which is −45°
    Double-check The point at −π4 is (22, −22), so sin(−π4) = −22, which equals −12, the input; and −45° is in the range.

    Rung 6 of 7

    Rung 6: a look-alike input that is not allowed

    Evaluate arcsin(32).

    Show the steps and the answer
    −1013/2√3/2
    The domain of arcsin stops at 1: 32 ≈ 0.866 is inside it and 32 = 1.5 is outside.
    1. Say what it asks: find the angle from −π2 to π2 whose sine is 32.That is what arcsin means.
    2. Check the input: 32=1.5, and 1.5 > 1.The domain is [−1, 1], so 1.5 is outside it.
    3. Stop and write undefined.No point on the unit circle has height 1.5; the highest point is at height 1, so no angle has sine 32.
    4. Do not confuse it with 32≈0.866, whose arcsin is π3.The root sign makes the top about 1.732 instead of 3, which keeps the number below 1.
    Answer
    arcsin(32) is undefined.
    Double-check The largest sine any angle has is sin π2 = 1, and 1 < 1.5, so no angle can give back the input.

    Rung 7 of 7

    Rung 7: two values in one expression

    Evaluate arcsin(−32) + arcsin(12) exactly.

    Show the steps and the answer
    1. Say what it asks: find each inverse sine on its own, then add the two angles.Each arcsin is a number, an angle. Add the angles, not the inputs: −32 + 12 ≈ −0.366 is a height between −12 and 0, so its angle lies between −30° and 0°, a different number.
    2. First value: arcsin(−32)=−π3.sin π3 = 32, and a negative input gives the same turn made clockwise.
    3. Second value: arcsin(12)=π6.sin π6 = 12, and π6 is in the range.
    4. Add: −π3+π6=−2π6+π6=−π6.Fractions add once they share a bottom: π3 = 2π6, and −2 sixths of π plus 1 sixth of π is −1 sixth of π.
    Answer
    arcsin(−32) + arcsin(12) = −π6
    Double-check In degrees: −60° + 30° = −30°, and −30° is −π6. Same answer.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Reading sin−1 x as 1sinx, one over sine.
    Here the −1 is the label for an inverse function, the same label as in f−1. It is not a power. Watch the difference: sin2 x does mean (sin x)2, but sin−1 x does not mean (sin x)−1.
    ✓ Instead: sin−1 x is arcsin x, an angle: sin−1(12) = π6. One over sine is written 1sinx, (sin x)−1 or csc x.
    ✗ Not this: arcsin(π6) = 12.
    This runs the machine the wrong way. arcsin takes a height and gives back an angle; sine is the one that takes the angle π6 and gives the height 12.
    ✓ Instead: sin π6 = 12, so arcsin(12) = π6: one fact read in two directions.
    ✗ Not this: arcsin(−1) = 3π2.
    sin 3π2 = −1 is true: 3π2 names the bottom of the circle. But 3π2 is bigger than π2, so it is outside the range.
    ✓ Instead: arcsin(−1) = −π2: the same bottom point, reached by a quarter turn clockwise.
    ✗ Not this: arcsin(0) = π.
    sin π = 0 is true, but π points to the left end of the circle, outside the right half.
    ✓ Instead: arcsin(0) = 0: the right end of the circle, at height 0, with no turn at all.
    ✗ Not this: Writing an angle for arcsin(2), such as one near 90°.
    No point on the unit circle has height 2; the highest point has height 1. The input is outside the domain [−1, 1].
    ✓ Instead: arcsin(2) is undefined. Write the word undefined, not an angle.

    Tips and tricks

    • Memory device: sine climbs the right side. Every arcsin answer sits on the right half of the unit circle, from −90° at the bottom to 90° at the top.
    • Check every answer twice: the sine of your angle must give back the input, and the angle must lie between −π2 and π2. If either check fails, the answer is wrong.
    • Sign shortcut: a positive input gives a positive angle; a negative input gives the negative of the same angle. arcsin(−22) = −arcsin(22) = −π4.
    • Do not memorize the table of nine values. Rebuild it in ten seconds from the five special sines and the sign shortcut.
    • Write exact answers such as −π3, not decimals such as −1.047, and use radians unless the problem uses degrees.
    • Say sin−1 x out loud as “inverse sine of x” or “arcsine of x”, never “sine to the minus one”. Saying it right keeps you from reading it as one over sine.

    7 The trap

    Answering with an angle outside the range. For arcsin(−12) it is tempting to write 7π6 or 11π6: both have sine −12, but neither lies between −π2 and π2. The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −π6. Before you write any arcsin answer, check that it lies in that stretch.

    Flash cards

    Say the answer out loud, then flip.

    In y = arcsin x, which letter is the height and which is the angle?
    • x, the input, is the height: how far your Ferris wheel seat sits above or below the hub.
    • y, the answer, is the angle: how far the wheel turned to put your seat there, always from −π2 to π2.
    • In symbols: sin y = x.
    Why is arcsin 2 undefined?
    It asks for an angle whose sine is 2, and there is none. On a Ferris wheel of radius 1, your seat is never more than 1 above or below the hub, so a sine is never above 1 or below −1. That is why the domain of arcsin is [−1, 1].
    Why does the inverse sine answer only with angles from −π2 to π2?
    Sine repeats: each lap of the Ferris wheel passes most heights twice, so many angles have the same sine. On the right side of the wheel, from straight down to straight up, each height from −1 to 1 shows up exactly once, so there is one answer, the principal value. This stretch is a convention everyone shares, so all answers agree.
    What is arcsin(−32)?
    • −π3, which is −60°. A negative height puts your seat below the hub, so the wheel turned down: a negative angle.
    • Check: sin(−π3) = −32, and −π3 lies between −π2 and π2.
    • Not 4π3 or 5π3: they have the same sine but lie outside that stretch.