Quarry School

Equations that factor like a quadratic

Subject: MathematicsLeans on: The zero-product ruleLeans on: Factoring by splitting the middle termLeans on: Pulling out a common factorLeans on: Moving a term across the equals signLeans on: Solving 2u + 1 = 0Leans on: What sin² t meansLeans on: Sine and cosine stay from −1 to 1Leans on: A basic equation on one turnLeans on: Adding and subtracting fractions of π
Level 1 · FoundationsAbout 31 min read1 new term
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    A trigonometric equation such as 2 sin2 t − 7 sin t − 4 = 0 looks crowded.

    Rule

    An equation a·sin2 t + b·sin t + c = 0, with a ≠ 0, is a quadratic in sin t: writing u = sin t gives au2 + bu + c = 0. Its solutions are the angles t with sin t = u, for each answer u of the quadratic with −1 ≤ u ≤ 1; an answer outside [−1, 1] gives no angle. Cosine works the same way. For tangent, keep every real answer, since tangent takes every real value.

    Step

    1. Get 0 on one side: add or subtract on both sides until every term sits on the left and the right side is 0.

    2. Make sure only one trig function appears (all sin t, or all cos t, or all tan t), with its square in one term.

    3. Write u for that function, so sin2 t becomes u2 and sin t becomes u.

    4. Factor the quadratic in u: pull out a common factor when there is no plain number term; otherwise split the middle term and group. Multiply back to check. An equation that comes already factored, such as (sin t − 1)(sin t + 2) = 0, skips this step.

    5. Set each factor equal to 0 and solve for u (the zero-product rule). Plug each u back into the factored form to see the product is 0.

    6. Put the function back: each value of u becomes a basic equation such as sin t = −12.

    7. Throw out any value of sine or cosine below −1 or above 1: no angle has it. Keep every value of tangent.

    8. Solve each remaining basic equation on [0, 2π) with the reference angle and the quadrants. For sine or cosine, the values 1 and −1 give one angle each; the other values give two.

    9. List all the angles in order and put each one back into the original equation.

    Question

    Solve 2 sin2 t − 7 sin t = 4 for every t in [0, 2π). In plain words: find every angle on one turn that makes the left side equal 4.

    Answer

    t = 7π6
    t = 11π6

    Trap

    Stopping at the values of sin t. Factoring hands you numbers such as sin t = −12 and sin t = 4, not angles. Each number still needs two more steps: throw it out if it is below −1 or above 1, and otherwise turn it into every angle on one turn with that sine (one angle for 1 and −1, two for the others). Only those angles are the answers.

    Strategy

    1. Zero: move every term to one side so the other side is 0.

    2. Rename: write u for the one trig function in the equation.

    3. Factor the quadratic in u and multiply back to check. An equation that comes already factored skips this step.

    4. Zero-product: set each factor equal to 0 and solve for u.

    5. Return: turn each u into a basic equation, such as sin t = −12.

    6. Filter: throw out any value of sine or cosine below −1 or above 1.

    7. Angles: solve each kept equation on [0, 2π) with the reference angle and the quadrants.

    8. Check: put every angle back into the original equation.

    Term

    trigonometric equation

    Definition

    An equation with sine, cosine or tangent of an unknown angle, such as 2 cos t = 1. Most are true at some angles and false at the others; solving one means finding every angle that makes it true. One that is true at every angle is called an identity, and one such as sin t = 2 is true at none.

    Term

    solution on one turn

    Definition

    A solution inside one trip around the circle, the interval [0, 2π). The start, 0, is included; the end, 2π, is left out because it is the same spot as 0.

    Term

    general solution

    Definition

    One formula naming every solution: the solutions on one turn plus any whole number of periods, as in t = a + 2kπ, where k is any integer, negative, zero or positive.

    Term

    period

    Definition

    How far you go along before a function's pattern starts over. Sine and cosine repeat every 2π, one full turn; tangent repeats every π, half a turn.

    Term

    reference angle

    Definition

    The angle between an angle's ending ray, its terminal side, and the nearest part of the x-axis, from 0 to π2. Angles sharing one have the same sine and cosine except for sign.

    1 In plain words

    A trigonometric equation such as 2 sin2 t − 7 sin t − 4 = 0 looks crowded. (sin2 t means sin t times itself.) The trick: cover every sin t with a sticky note marked u. What is left, 2u2 − 7u − 4 = 0, is a quadratic you already know how to factor. So you solve in two stages, like finding a seat on a Ferris wheel of radius 1: first the height (the value of sin t), then the spots on the wheel at that height (the angles). No seat is ever more than 1 above or below the center, so if the algebra hands you a height of 4, nothing matches. You cross it out.

    2 Picture it

    7π/611π/6π/2π3π/22π247π/611π/6π/2π3π/22π−11234
    In the worked example, 2 sin2 t − 7 sin t = 4, the quadratic gives sin t = 4 or sin t = −12.

    Reminder

    Reminder: The zero-product rule, Factoring by splitting the middle term, Pulling out a common factor, Moving a term across the equals sign, Solving 2u + 1 = 0, What sin2 t means, Sine and cosine stay from −1 to 1, A basic equation on one turn, Adding and subtracting fractions of π
    • The zero-product rule. If a product is 0, one of its factors is 0: (u − 3)(u + 4) = 0 means u = 3 or u = −4. It works only when the other side is 0.
    • Factoring by splitting the middle term. For au2 + bu + c, find two numbers that multiply to a·c and add to b, split the middle term with them, and group. For 2u2 + 5u + 3: a·c = 6, and 2 + 3 = 5, so 2u2 + 2u + 3u + 3 = 2u(u + 1) + 3(u + 1) = (2u + 3)(u + 1).
    • Pulling out a common factor. When every term has a u, take it out front: 2u2 + u = u(2u + 1). Multiply back to check: u·2u + u·1 = 2u2 + u.
    • Moving a term across the equals sign. Do the same thing to both sides: from u2 = 4u − 3, subtract 4u and add 3 to get u2 − 4u + 3 = 0.
    • Solving 2u + 1 = 0. Undo the steps in reverse order: subtract 1 to get 2u = −1, then divide by 2 to get u = −12.
    • What sin2 t means. sin2 t is (sin t)2: find the sine first, then square it. sin2(π6) = (12)2 = 14, and (−12)2 = 14 as well, because a negative times a negative is positive.
    • Sine and cosine stay from −1 to 1. On the unit circle, cos t is the x and sin t is the y of a point on a circle of radius 1, so −1 ≤ sin t ≤ 1 and −1 ≤ cos t ≤ 1. Tangent has no such limit.
    • A basic equation on one turn. For sin t = −12: the reference angle is π6, and sine is negative in quadrants III and IV, so t = π + π6 = 7π6 and t = 2π − π6 = 11π6.
    • Adding and subtracting fractions of π. Rewrite π and 2π with the same bottom first: π + π6 = 6π6 + π6 = 7π6, and 2π − π3 = 6π3 − π3 = 5π3.

    3 Why

    The equation looks at t only through sin t. So if an angle t makes it true, the number sin t, put in for u, makes 2u2 − 7u − 4 = 0 true: sin t must be one of the quadratic's answers, −12 or 4. And any angle whose sine is one of those answers makes the equation true. So the solutions are exactly those angles. The throw-out step comes from the unit circle: its radius is 1, and sin t is the height of a point on it, so sin t is never below −1 or above 1. The algebra cannot know that; the circle does.

    4 The rule

    An equation a·sin2t+b·sint+c=0, with a≠0, is a quadratic in sin t: writing u=sint gives au2+ bu +c=0.

    Its solutions are the angles t with sint=u, for each answer u of the quadratic with −1≤u≤1; an answer outside [−1,1] gives no angle. Cosine works the same way. For tangent, keep every real answer, since tangent takes every real value.

    The same idea, five ways

    Say it

    a quadratic in sine t. It means sine t plays the part that x plays in an ordinary quadratic. Read sin2 t aloud as sine squared of t.

    Write it

    An equation is a quadratic in sin t when, after you write one letter u for sin t, it has the form au2 + bu + c = 0 with a not equal to 0.

    In math
    • a·sin2 t + b·sin t + c = 0, with a ≠ 0
    • u = sin t turns it into au2 + bu + c = 0
    • 2 sin2 t − sin t − 1 = 0 is 2u2 − u − 1 = 0
    • keep an answer u only when −1 ≤ u ≤ 1 (sine and cosine)
    Like

    Like a box with a label: put sin t in a box marked u, do the algebra with the box, and open it only at the end to find the angles.

    See it

    2sin2t−sint−1=0

    write u for sin t

    2u2−u−1=0

    a quadratic in u

    The same idea, other ways

    As a picture

    Picture the graph of y = sin t over one turn: a wave that rises to 1 and falls to −1. Each answer the quadratic gives for sin t is a flat line across that picture, and each place where the wave crosses the line is an angle. A line at 1 touches the top of the wave once. A line at 12 crosses it twice. A line at −2 passes below the whole wave and crosses nothing: that miss is the throw-out step.

    π/2π/65π/6π/2π3π/22π−2−11
    Three flat lines, three outcomes.
    As a story

    A Ferris wheel has radius 1, and heights are measured from its center. A friend works out on paper that your seat must be at height 4 or at height −12. You look up: the top seat is at height 1, so height 4 is empty sky far above the wheel. Cross it out. Height −12 is below the center, and a seat passes it twice on every turn, once on the way down and once on the way back up. Those two moments are the two angles.

    x = cos θy = sin θseat
    A seat at angle 7π6 is half a unit below the center of a wheel of radius 1.
    With small numbers

    Take cos2 t − cos t − 2 = 0. Write u for cos t: u2 − u − 2 = 0. Two numbers that multiply to −2 and add to −1 are −2 and 1, so (u − 2)(u + 1) = 0, and u = 2 or u = −1. Put cosine back: cos t = 2 has no angle, since cosine never goes above 1; cos t = −1 is the leftmost point of the circle: t = π on one turn, and t = π + 2kπ for every integer k in general. Check: (−1)2 − (−1) − 2 = 1 + 1 − 2 = 0.

    x = cos θy = sin θπ
    cos t = −1 happens only at the leftmost point of the circle, once per turn, at π.
    Why it must be true

    The equation looks at t only through the number sin t. Two angles with the same sine, like π6 and 5π6, look identical to it. So the question splits in two: which numbers u make 2u2 − 7u − 4 = 0, a plain algebra question, and which angles have those numbers as their sine, a unit circle question. Splitting it this way loses nothing and adds nothing.

    x = cos θy = sin θ5π/6
    5π6 sits at the same height, 12, as π6: an equation that sees only sin t cannot tell them apart.
    Rule of thumb

    Algebra first, circle second, check last. The algebra does not know that sine and cosine stop at 1, so every number it hands you must pass the circle's test, from −1 to 1, before it turns into angles.

    1. algebra: find the values of sin t

    2. filter: keep −1 ≤ value ≤ 1

    3. circle: turn each kept value into angles

    4. check each angle in the original

    value from the factoringsin t = value: angles in [0, 2π)cos t = value: angles in [0, 2π)
    1π2 (one angle)0 (one angle)
    12π6,5π6π3,5π3
    00, ππ2,3π2
    −127π6,11π62π3,4π3
    −13π2 (one angle)π (one angle)
    below −1 or above 1, such as 4, −3 or −32none: throw it outnone: throw it out

    5 How

    1. Get 0 on one side: add or subtract on both sides until every term sits on the left and the right side is 0.
    2. Make sure only one trig function appears (all sin t, or all cos t, or all tan t), with its square in one term.
    3. Write u for that function, so sin2 t becomes u2 and sin t becomes u.
    4. Factor the quadratic in u: pull out a common factor when there is no plain number term; otherwise split the middle term and group. Multiply back to check. An equation that comes already factored, such as (sin t − 1)(sin t + 2) = 0, skips this step.
    5. Set each factor equal to 0 and solve for u (the zero-product rule). Plug each u back into the factored form to see the product is 0.
    6. Put the function back: each value of u becomes a basic equation such as sin t = −12.
    7. Throw out any value of sine or cosine below −1 or above 1: no angle has it. Keep every value of tangent.
    8. Solve each remaining basic equation on [0, 2π) with the reference angle and the quadrants. For sine or cosine, the values 1 and −1 give one angle each; the other values give two.
    9. List all the angles in order and put each one back into the original equation.

    Solving a trig equation that factors like a quadratic

    1
    Is the right side something other than 0?
    YesAdd or subtract on both sides until one side is 0.
    NoGo on.
    ↓
    2
    Does the equation come already factored, as in (sin t − 1)(sin t + 2) = 0?
    YesSkip the factoring: set each factor equal to 0, solve for the value of the function, and go to the question about values below −1 or above 1.
    NoGo on.
    ↓
    3
    Does only one trig function appear (sin t, or cos t, or tan t), with its square in one term?
    YesWrite u for it and go on.
    NoThis method does not fit the equation as it stands. Equations that mix sin t and cos t are first rewritten into one function, a step taught later in this unit.
    ↓
    4
    Is the plain number term missing, as in 2u2 + u = 0?
    YesPull out the common factor u. Do not divide by u: that deletes the answers where u = 0.
    NoLook for two whole numbers, positive or negative, that multiply to a·c and add to b.
    ↓
    5
    Did you find two such numbers?
    YesSplit the middle term with them, group, and multiply back to check.
    NoRecheck the signs and that every term moved to one side. Every equation in this lesson that does not come already factored factors this way.
    ↓
    6
    Is an answer for sin t or cos t below −1 or above 1?
    YesThrow that answer out: it gives no angle.
    NoKeep it. Answers for tan t are always kept.
    ↓
    7
    Is a kept value of sin t or cos t equal to 1 or −1?
    YesIt gives one angle on one turn: the top, bottom, right or left point of the unit circle.
    NoIt gives two angles on one turn. Every kept value of tan t also gives two.
    1. Zero: move every term to one side so the other side is 0.
    2. Rename: write u for the one trig function in the equation.
    3. Factor the quadratic in u and multiply back to check. An equation that comes already factored skips this step.
    4. Zero-product: set each factor equal to 0 and solve for u.
    5. Return: turn each u into a basic equation, such as sin t = −12.
    6. Filter: throw out any value of sine or cosine below −1 or above 1.
    7. Angles: solve each kept equation on [0, 2π) with the reference angle and the quadrants.
    8. Check: put every angle back into the original equation.

    6 Worked example

    Worked example

    Two values of sine, one thrown out

    Solve 2 sin2 t − 7 sin t = 4 for every t in [0, 2π). In plain words: find every angle on one turn that makes the left side equal 4.

    Show the steps and the answer
    2u²−8u2uu−4+1u−4
    The four parts add to 2u2 − 8u + u − 4 = 2u2 − 7u − 4, so (2u + 1)(u − 4) is the right factoring.
    x = cos θy = sin θ7π/6
    At 7π6, in quadrant III, the point sits half a unit below the center: sin t = −12.
    x = cos θy = sin θ11π/6
    At 11π6, in quadrant IV, the point is again half a unit below the center: the second angle with sin t = −12.
    1. Subtract 4 from both sides: 2 sin2t−7sint−4=0.The zero-product rule, used in a moment, needs a 0 on one side. Subtracting the same number from both sides keeps them equal.
    2. Write u for sin t: 2u2−7u−4=0.sin2 t means (sin t)2, which is u2. Every t in the equation sits inside a sin t, so with this one letter the trigonometric equation becomes a plain quadratic.
    3. Find two numbers that multiply to a·c=2·(−4)=−8 and add to b=−7. They are −8 and 1.(−8)·1 = −8 and −8 + 1 = −7. These two numbers show how to split the middle term so the four pieces group in pairs.
    4. Split and group: 2u2−8u+u−4=2u(u−4)+1(u−4)=(2u+1)(u−4). So (2u+1)(u−4)=0.Both pairs contain (u − 4), so it comes out as a common factor. Multiply back to check: 2u2 − 8u + u − 4 = 2u2 − 7u − 4, the quadratic you started with.
    5. Set each factor equal to 0: 2u+1=0 gives u=−12; u−4=0 gives u=4.This finds the values of u that make the product 0 (the zero-product rule). For 2u + 1 = 0, subtract 1, then divide by 2. Plug back in: u = −12 gives (0)(−92) = 0, and u = 4 gives (9)(0) = 0.
    6. Put sine back: sint=−12 or sint=4.u was only a stand-in for sin t. These are values of sine, not angles yet.
    7. Throw out sint=4.sin t is the height of a point on the unit circle, whose radius is 1, so −1 ≤ sin t ≤ 1. Height 4 is far above the whole circle: no angle has sine 4.
    8. Solve sint=−12. The reference angle is π6, since sinπ6=12. Sine is negative in quadrants III and IV.This is a basic equation, solved by the reference angle and quadrant method: the reference angle gives the size, and the sign of sine picks the quadrants.
    9. Quadrant III: t=π+π6=7π6. Quadrant IV: t=2π−π6=11π6.In quadrant III you go half a turn, then the reference angle more; in quadrant IV you stop the reference angle short of a full turn. In sixths: 6π6 + π6 = 7π6 and 12π6 − π6 = 11π6.
    Answer
    • t=7π6
    • t=11π6
    Double-check Put each angle into the original equation 2 sin2 t − 7 sin t = 4. At t = 7π6, sin t = −12, so the left side is 2·14 − 7·(−12) = 12 + 72 = 82 = 4, the right side. At t = 11π6, sin t is also −12, so the same arithmetic gives 4. A second way, by picture: on the unit circle the only points at height −12 are the two at 7π6 (quadrant III) and 11π6 (quadrant IV), and no point is at height 4.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 7

    Already factored

    Solve (sin t − 1)(sin t + 2) = 0 for every t in [0, 2π). In plain words: find every angle on one turn that makes the product on the left equal 0.

    Show the steps and the answer
    x = cos θy = sin θπ/2
    Height 1 is the top of the circle, reached once per turn, at π2.
    1. Set each factor equal to 0: sint−1=0 or sint+2=0.This finds what sin t must be for the product to be 0. A product is 0 only when one of its factors is 0 (the zero-product rule), and the right side here is already 0.
    2. Solve each one for sin t: sint=1 or sint=−2.Add 1 to both sides of the first; subtract 2 from both sides of the second. Plug back in: with sin t = 1 the product is (0)(3) = 0, and with sin t = −2 it is (−3)(0) = 0.
    3. Throw out sint=−2.sin t is the height of a point on the unit circle, so it is never below −1. No angle has sine −2.
    4. Solve sint=1: height 1 is the top of the unit circle, the point (0, 1), a quarter turn from the start, so t=π2.Only one point of the circle sits at height 1, so this value gives one angle on one turn, not two.
    Answer
    t=π2
    Double-check Put t = π2 back in: sin π2 = 1, so the left side is (1 − 1)(1 + 2) = 0·3 = 0. A second way: on the unit circle the only point at height 1 is the top, at π2, and no point is as low as −2, so no other angle can work.

    Rung 2 of 7

    A plain trinomial, one value thrown out

    Solve cos2 t + 2 cos t − 3 = 0 for every t in [0, 2π). In plain words: find every angle on one turn that makes the left side 0.

    Show the steps and the answer
    x = cos θy = sin θ0
    The rightmost point, (1, 0), is the only point with x-coordinate 1, so cos t = 1 once per turn, at t = 0.
    1. Write u for cos t: u2+2u−3=0.cos2 t means (cos t)2, which is u2. The right side is already 0, so nothing has to move.
    2. Find two numbers that multiply to −3 and add to 2: they are 3 and −1. So u2+2u−3=(u+3)(u−1).3·(−1) = −3 and 3 + (−1) = 2. When u2 has no number in front, those two numbers go straight into the brackets. Multiply back to check: u2 − u + 3u − 3 = u2 + 2u − 3.
    3. Set each factor equal to 0: u+3=0 gives u=−3; u−1=0 gives u=1.This finds the values of u that make the product 0. Plug back in: (−3 + 3)(−3 − 1) = 0·(−4) = 0 and (1 + 3)(1 − 1) = 4·0 = 0.
    4. Put cosine back: cost=−3 or cost=1. Throw out cost=−3.cos t is the x-coordinate of a point on the unit circle, and no point of that circle lies left of −1.
    5. Solve cost=1: x-coordinate 1 belongs to the rightmost point of the circle, (1, 0), so t=0.Only one point is that far right. A full turn, 2π, lands on the same point, but [0, 2π) leaves 2π out, so 0 is the only answer on this turn.
    Answer
    t = 0
    Double-check Put t = 0 back in: cos 0 = 1, so the left side is 12 + 2·1 − 3 = 1 + 2 − 3 = 0. A second way: on the unit circle only the rightmost point, (1, 0), has x-coordinate 1, and no point has x-coordinate −3, so t = 0 is the only angle. The thrown-out value does solve the quadratic, (−3)2 + 2·(−3) − 3 = 9 − 6 − 3 = 0; it is out only because of the circle.

    Rung 3 of 7

    No number term, so pull out a common factor

    Solve 2 cos2 t + cos t = 0 for every t in [0, 2π). In plain words: find every angle on one turn that makes the left side 0.

    Show the steps and the answer
    π/22π/34π/33π/2π/2π3π/22π−11
    The lines y = 0 and y = −12 each cross the graph of y = cos t twice on one turn: four answers in all.
    1. Write u for cos t: 2u2+u=0.Renaming shows the quadratic. There is no plain number term, so both terms contain u.
    2. Pull out the common factor u: u(2u+1)=0.Multiply back to check: u·2u + u·1 = 2u2 + u. Do not divide both sides by u instead: dividing by a number that might be 0 deletes the answers where it is 0.
    3. Set each factor equal to 0: u=0 or 2u+1=0, so u=0 or u=−12.This finds the values of u that make the product 0. For 2u + 1 = 0, subtract 1 and divide by 2. Plug back in: u = 0 gives 0·(2·0 + 1) = 0·1 = 0, and u = −12 gives 2u + 1 = −1 + 1 = 0, so the product is 0.
    4. Put cosine back: cost=0 or cost=−12. Both lie from −1 to 1, so both stay.Neither value is below −1 or above 1.
    5. Solve cost=0: x-coordinate 0 means the top or the bottom of the circle, so t=π2 and t=3π2.The two points of the unit circle on the vertical axis are (0, 1) and (0, −1).
    6. Solve cost=−12: the reference angle is π3, since cosπ3=12. Cosine is negative in quadrants II and III, so t=π−π3=2π3 and t=π+π3=4π3.The reference angle gives the size; the sign of cosine picks the quadrants. In thirds: 3π3 − π3 = 2π3 and 3π3 + π3 = 4π3.
    7. List the angles in order: π2,2π3,4π3,3π2.Both factors give angles, and the answer is all of them.
    Answer
    • t=π2
    • t=2π3
    • t=4π3
    • t=3π2
    Double-check At t = 2π3 and t = 4π3, cos t = −12, so 2·14 + (−12) = 12 − 12 = 0. At t = π2 and t = 3π2, cos t = 0, so 2·0 + 0 = 0. A second way, by picture: the line y = 0 and the line y = −12 each cross the graph of y = cos t twice on one turn, so four answers is the right count. Dividing by cos t at the start would have found only 2π3 and 4π3.

    Rung 4 of 7

    Move the terms first, with a 2 in front

    Solve 2 sin2 t + 1 = 3 sin t for every t in [0, 2π). In plain words: find every angle on one turn that makes both sides equal.

    Show the steps and the answer
    π/6π/25π/6π/2π3π/22π−11
    The line y = 12 crosses the graph of y = sin t twice and the line y = 1 touches it once: three answers.
    1. Subtract 3 sin t from both sides: 2 sin2t−3sint+1=0.The zero-product rule needs 0 on one side. Write the terms from the square down, the way a quadratic is written.
    2. Write u for sin t: 2u2−3u+1=0.Renaming shows the quadratic.
    3. Find two numbers that multiply to a·c=2·1=2 and add to −3: they are −2 and −1. Split the middle term: 2u2−2u−u+1.(−2)·(−1) = 2 and −2 + (−1) = −3. Splitting makes two pairs that share a factor.
    4. Group: 2u(u−1)−1(u−1)=(2u−1)(u−1).Both pairs contain (u − 1). Multiply back to check: 2u2 − 2u − u + 1 = 2u2 − 3u + 1.
    5. Set each factor equal to 0: 2u−1=0 gives u=12; u−1=0 gives u=1.This finds the values of u that make the product 0. For 2u − 1 = 0, add 1 and divide by 2. Plug back in: u = 12 gives (2·12 − 1)(12 − 1) = 0·(−12) = 0, and u = 1 gives (2 − 1)(1 − 1) = 1·0 = 0.
    6. Put sine back: sint=12 or sint=1. Both lie from −1 to 1, so both stay.Nothing to throw out this time.
    7. Solve sint=12: the reference angle is π6; sine is positive in quadrants I and II, so t=π6 and t=π−π6=5π6.Two quadrants share a positive sine. In sixths: 6π6 − π6 = 5π6.
    8. Solve sint=1: only the top of the circle, t=π2.Height 1 is a single point of the circle.
    9. List in order: π6,π2,5π6.The answer is every angle from both factors.
    Answer
    • t=π6
    • t=π2
    • t=5π6
    Double-check Use the original equation, before anything moved. At t = π6, sin t = 12: left 2·14 + 1 = 32, right 3·12 = 32. At t = 5π6, sin t is also 12, so the sides match again. At t = π2, sin t = 1: left 2·1 + 1 = 3, right 3·1 = 3.

    Rung 5 of 7

    Tangent, where nothing is thrown out

    Solve (tan t − 3)(tan t + 1) = 0 for every t in [0, 2π). In plain words: find every angle on one turn that makes the product on the left equal 0.

    Show the steps and the answer
    π/33π/44π/37π/4π/2π3π/22π−22
    The graph of y = tan t climbs to every height.
    1. Set each factor equal to 0: tant−3=0 or tant+1=0, so tant=3 or tant=−1.This finds what tan t must be for the product to be 0 (the zero-product rule). Plug back in: (3 − 3)(3 + 1) = 0 and (−1 − 3)(−1 + 1) = 0.
    2. Keep both values, even though 3≈1.73 is bigger than 1.The limit from −1 to 1 belongs to sine and cosine, the coordinates of a point on a circle of radius 1. Tangent is sin t ÷ cos t, and a quotient can be any number.
    3. Solve tant=3: the reference angle is π3, since tanπ3=32÷12=3. Tangent is positive in quadrants I and III, so t=π3 and t=π+π3=4π3.Dividing by 12 is the same as multiplying by 2. Tangent is positive where sine and cosine have the same sign.
    4. Solve tant=−1: the reference angle is π4, since tanπ4=1. Tangent is negative in quadrants II and IV, so t=π−π4=3π4 and t=2π−π4=7π4.Tangent is negative where sine and cosine have opposite signs. In fourths: 4π4 − π4 = 3π4 and 8π4 − π4 = 7π4.
    5. List in order: π3,3π4,4π3,7π4.The answer is every angle from both factors.
    Answer
    • t=π3
    • t=3π4
    • t=4π3
    • t=7π4
    Double-check At 4π3 the point is (−12, −32), so tan t = (−32) ÷ (−12) = 3 and the first factor is 0. At 7π4 the point is (22, −22), so tan t = −1 and the second factor is 0. A second way: the two answers for each value are exactly π apart, 4π3 − π3 = π and 7π4 − 3π4 = π, as tangent's period of π says they must be.

    Rung 6 of 7

    A 4 in front, and a fraction out of range

    Solve 4 cos2 t + 4 cos t − 3 = 0 for every t in [0, 2π). In plain words: find every angle on one turn that makes the left side 0.

    Show the steps and the answer
    π/35π/3π/2π3π/22π−2−11
    The line y = −32 runs below the whole graph of y = cos t, so only y = 12 gives angles.
    1. Write u for cos t: 4u2+4u−3=0.Renaming shows the quadratic; the right side is already 0.
    2. Find two numbers that multiply to a·c=4·(−3)=−12 and add to 4: they are 6 and −2. Split the middle term: 4u2+6u−2u−3.The pairs that multiply to −12 are 1 and −12, 2 and −6, 3 and −4, 4 and −3, 6 and −2, 12 and −1. Only 6 and −2 add to 4.
    3. Group: 2u(2u+3)−1(2u+3)=(2u−1)(2u+3).Both pairs contain (2u + 3). Multiply back to check: 4u2 + 6u − 2u − 3 = 4u2 + 4u − 3.
    4. Set each factor equal to 0: 2u−1=0 gives u=12; 2u+3=0 gives u=−32.This finds the values of u that make the product 0. For 2u + 3 = 0, subtract 3, then divide by 2. Plug back in: when u = 12, 2u = 1 and the product is (1 − 1)(1 + 3) = 0; when u = −32, 2u = −3 and it is (−3 − 1)(−3 + 3) = 0.
    5. Put cosine back: cost=12 or cost=−32. Throw out cost=−32.−32 is −1.5, and −1.5 < −1. A fraction can still be out of range: no point of the unit circle is that far left.
    6. Solve cost=12: the reference angle is π3; cosine is positive in quadrants I and IV, so t=π3 and t=2π−π3=5π3.Two quadrants share a positive cosine. In thirds: 6π3 − π3 = 5π3.
    Answer
    • t=π3
    • t=5π3
    Double-check At t = π3, cos t = 12: 4·14 + 4·12 − 3 = 1 + 2 − 3 = 0. At t = 5π3, cos t is also 12, so the same arithmetic gives 0. A second way, by picture: the line y = 12 crosses the graph of y = cos t exactly twice on one turn, and the line y = −32 runs below the whole graph. The thrown-out value does solve the quadratic, 4·94 + 4·(−32) − 3 = 9 − 6 − 3 = 0; it is out only because no angle has cosine −1.5.

    Rung 7 of 7

    A doubled angle inside the quadratic

    Solve 2 cos2 2t − 5 cos 2t + 2 = 0 for every t in [0, 2π). In plain words: find every angle t on one turn that makes the left side 0, where each cosine is taken of the doubled angle 2t.

    Show the steps and the answer
    π/65π/67π/611π/6π/2π3π/22π−112
    y = cos 2t makes two full waves while t makes one turn.
    1. Write u for cos 2t: 2u2−5u+2=0.The same cos 2t appears in both places, so one letter can stand for it. cos2 2t means (cos 2t)2.
    2. Find two numbers that multiply to a·c=2·2=4 and add to −5: they are −4 and −1. Split and group: 2u2−4u−u+2=2u(u−2)−1(u−2)=(2u−1)(u−2).(−4)·(−1) = 4 and −4 + (−1) = −5. Multiply back to check: 2u2 − 4u − u + 2 = 2u2 − 5u + 2.
    3. Set each factor equal to 0: 2u−1=0 gives u=12; u−2=0 gives u=2.This finds the values of u that make the product 0. Plug back in: u = 12 gives (2·12 − 1)(12 − 2) = 0·(−32) = 0, and u = 2 gives (4 − 1)(2 − 2) = 3·0 = 0.
    4. Put cosine back: cos2t=12 or cos2t=2. Throw out cos2t=2.A cosine is never above 1, whatever angle sits inside it.
    5. Widen the interval: as t runs over [0,2π), 2t runs over [0,4π), two full turns.Doubling every t doubles both ends of the interval, as in the lesson on multiple angles.
    6. Solve cos2t=12 for 2t on [0,4π): the first turn gives 2t=π3 and 2t=5π3; adding a full turn, 2π=6π3, gives 2t=7π3 and 2t=11π3.The reference angle is π3, cosine is positive in quadrants I and IV, and cosine repeats every full turn.
    7. Divide each by 2: t=π6,5π6,7π6,11π6.Dividing a fraction by 2 doubles its bottom: 7π3 ÷ 2 = 7π6. All four are less than 2π = 12π6, so all four lie on one turn.
    Answer
    • t=π6
    • t=5π6
    • t=7π6
    • t=11π6
    Double-check At t = 7π6, 2t = 7π3, one full turn plus π3, so cos 2t = 12 and 2·14 − 5·12 + 2 = 12 − 52 + 2 = 0. A second way, by counting: one kept value gives two angles per turn, and 2t makes two turns, so there must be 2·2 = 4 answers, which matches the list.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Keeping sin t = 4 from 2 sin2 t − 7 sin t − 4 = 0 and looking for an angle whose sine is 4.
    u = 4 does make the quadratic 0 (2·16 − 7·4 − 4 = 32 − 28 − 4 = 0), but sin t is the height of a point on a circle of radius 1. No point on that circle is at height 4, so no angle has sine 4.
    ✓ Instead: Write 'no angle' beside sin t = 4 and solve only sin t = −12, which gives t = 7π6 and t = 11π6.
    ✗ Not this: Factoring 2 sin2 t − 7 sin t = 4 as sin t (2 sin t − 7) = 4 and setting each factor equal to 4.
    The zero-product rule works only for 0. Two numbers can multiply to 4 without either one being 4: 8 × 12 = 4. Here the wrong move gives sin t = 4 or sin t = 112, both impossible, and the false verdict that nothing solves the equation.
    ✓ Instead: Subtract 4 first: 2 sin2 t − 7 sin t − 4 = 0, which factors as (2 sin t + 1)(sin t − 4) = 0 and gives the real answers 7π6 and 11π6.
    ✗ Not this: Solving 2 sin2 t = sin t by dividing both sides by sin t, which leaves 2 sin t = 1, so sin t = 12 and t = π6 or 5π6.
    Dividing by sin t is not allowed when sin t = 0, and those are exactly angles that work: at t = 0 and t = π, sin t = 0, so the left side is 2·02 = 0 and the right side is 0. Dividing throws them away without a trace.
    ✓ Instead: Move everything to one side and pull out the common factor: 2 sin2 t − sin t = 0, so sin t (2 sin t − 1) = 0. Then sin t = 0 gives 0 and π, and sin t = 12 gives π6 and 5π6: four answers, 0, π6, 5π6 and π.
    ✗ Not this: Throwing out tan t = 3 because 3 ≈ 1.73 is bigger than 1.
    The limit from −1 to 1 comes from the unit circle and belongs to sine and cosine only. Tangent is sin t ÷ cos t, and a quotient can be any number: at π3 it is 32 ÷ 12 = 3.
    ✓ Instead: Keep every value of tan t. tan t = 3 gives t = π3 and t = 4π3 on one turn.
    ✗ Not this: Keeping cos t = −32 because a fraction looks small.
    −32 is −1.5, and −1.5 < −1. No point of the unit circle is farther left than −1, so no angle has cosine −32.
    ✓ Instead: Compare each value with −1 and 1, as a decimal if that helps: −32 = −1.5 is out, 12 = 0.5 is in. In 4 cos2 t + 4 cos t − 3 = 0 only cos t = 12 survives, giving π3 and 5π3.
    ✗ Not this: Reading sin2 t as sin(t2), the sine of the angle squared.
    The small 2 after sin squares the sine's output, not the angle. sin2(π6) = (12)2 = 14, which is not the sine of the angle (π6)2.
    ✓ Instead: Read sin2 t as (sin t)2. That is exactly why writing u for sin t turns sin2 t into u2.

    Tips and tricks

    • Write u = sin t at the top of your work. The letter u is a nickname: when the algebra ends, put sin t back, because the answers must be angles.
    • Check the factoring before you go on: multiply the brackets back out and compare with the quadratic term by term.
    • Draw a box around each value of sine or cosine that lies from −1 to 1. Only boxed values go on to the unit circle. Turn a fraction into a decimal if that helps: −32 = −1.5 is out.
    • Count before you finish: on one turn each kept value of sine or cosine gives two angles, except 1 and −1, which give one each. Every kept value of tangent gives two.
    • Memory cue: find the sine, then the angle. The quadratic answers the first question; the unit circle answers the second.
    • Do not divide both sides by sin t, cos t or tan t to make an equation smaller: the division drops every angle where that function is 0. Pull it out as a common factor instead, so those answers stay in.
    • For the general solution of an equation in sin t, cos t or tan t, find each solution on one turn first, then add 2kπ to each one for sine and cosine (k any integer, such as −1, 0 or 2). For tangent, whose period is π, add kπ to each solution between 0 and π.

    7 The trap

    Stopping at the values of sin t. Factoring hands you numbers such as sin t = −12 and sin t = 4, not angles. Each number still needs two more steps: throw it out if it is below −1 or above 1, and otherwise turn it into every angle on one turn with that sine (one angle for 1 and −1, two for the others). Only those angles are the answers.

    Flash cards

    Say the answer out loud, then flip.

    Factoring 2 cos2 t + cos t − 1 = 0 gives cos t = 12 or cos t = −1. Are you done?
    • No. Those are values of cos t, not angles. Both lie between −1 and 1, so each one still has to become angles on [0, 2π).
    • cos t = 12: reference angle π3, and cosine is positive in quadrants I and IV, so t = π3 and t = 5π3.
    • cos t = −1: the lowest value cosine reaches, so only one angle has it, t = π.
    Solving the quadratic in u gives u = 3 or u = −1. What do you keep if u stands for sin t? If u stands for tan t?
    • For sin t: keep only sin t = −1, which gives t = 3π2. Throw out sin t = 3: sin t is the height of a seat on a Ferris wheel of radius 1, and no seat is ever more than 1 above the center.
    • For tan t: keep both. tan t = sintcost, and when cos t is close to 0 that fraction can be as large as you like, positive or negative. Only sine and cosine are stuck between −1 and 1.
    Why does sin t = −12 give two angles on [0, 2π), but sin t = 1 only one?
    • sin t is the height of a seat on a Ferris wheel of radius 1. In one turn the seat passes every height between the bottom and the top twice, once on the left half and once on the right: height −12 comes at t = 7π6 and t = 11π6.
    • Height 1 is the very top seat, where the right and left halves meet, so it comes only once, at t = π2.
    Solve 2 sin2 t = −sin t on [0, 2π).
    • Get 0 on one side, which the zero-product rule needs: 2 sin2 t + sin t = 0. Writing u for sin t gives 2u2 + u = 0.
    • There is no plain number term, so pull out the common factor: u(2u + 1) = 0. That gives sin t = 0 or sin t = −12.
    • sin t = 0 gives t = 0 and t = π; sin t = −12 gives t = 7π6 and t = 11π6.