Solving sin t = c, cos t = c and tan t = c on one turn
Quick review (2 minutes)
Until now you went forward, from an angle to its sine.
For 0 ≤ t < 2π, when c is not an axis value and the function can reach it: the size of c gives the reference angle α, the table angle whose sine, cosine or tangent has that size; the sign of c gives the two quadrants where that function has that sign; the answers are α in I, π − α in II, π + α in III and 2π − α in IV. The axis values, 0, 1 and −1 for sine and cosine and 0 for tangent, put the answers on the axes instead, and sine and cosine have no answer when c is above 1 or below −1.
Get the function alone on one side: sin t = c, cos t = c or tan t = c.
Say what the question asks: every angle t with 0 ≤ t < 2π whose sine (or cosine, or tangent) equals c.
Rule out the special cases. For sine or cosine, c > 1 or c < −1 has no solution. If c is 0, or 1 or −1 for sine and cosine, the answers sit on the axes: read them off the circle, check them and stop.
Drop the sign of c and find that size in your function's column of the table. The angle at the start of that row is the reference angle α.
Use the sign of c and All Students Take Calculus to pick the two quadrants where your function has that sign.
Place α in each of those quadrants: α in I, π − α in II, π + α in III, 2π − α in IV. Rewrite π or 2π with the same bottom as α, then combine the tops.
Check: put each answer back into the original equation. Name its quadrant and reference angle, read the size from the table, attach that quadrant's sign, and confirm you get c.
Get sin t, cos t or tan t alone on one side.
Check the special cases: no solution, or an axis value read off the circle.
The size of c gives the reference angle α from the table.
The sign of c gives the two quadrants, by All Students Take Calculus.
Write the answers: α in I, π − α in II, π + α in III, 2π − α in IV.
Put each answer back into the original equation.
Solve sin t = − for 0 ≤ t < 2π.
t =
t =
Stopping at the table. The table gives only the size of c, so answering t = to sin t = − loses the sign: sin is +. After the table, always pick the two quadrants from the sign of c, write an angle in each, and put both answers back into the equation.
trigonometric equation
An equation with sine, cosine or tangent of an unknown angle, such as 2 cos t = 1. Most are true at some angles and false at the others; solving one means finding every angle that makes it true. One that is true at every angle is called an identity, and one such as sin t = 2 is true at none.
solution on one turn
A solution inside one trip around the circle, the interval [0, 2π). The start, 0, is included; the end, 2π, is left out because it is the same spot as 0.
reference angle
The angle between an angle's ending ray, its terminal side, and the nearest part of the x-axis, from 0 to . Angles sharing one have the same sine and cosine except for sign.
1 In plain words
Until now you went forward, from an angle to its sine. Now you go backward. You are given the sine, a number c such as −, and you want every angle on one turn that has it. Picture a Ferris wheel seat and its height above the hub, where below the hub counts as negative. On one ride round, the seat passes each height twice, once going up and once coming down; only the top and the bottom are passed once. Two moves find both spots. The size of c, with its sign dropped, points to a small first quadrant angle called the reference angle. The sign of c picks the two quadrants. Then you place the reference angle in each of them.
2 Picture it
Reminder
Reminder: Reference angle, Signs by quadrant, Sine and cosine as coordinates, Tangent from sine and cosine, One number, two forms, Fractions with π, Solving a linear equation, One turn
- Reference angle. The acute angle between the terminal side and the x-axis. For it is π − = ; for it is 2π − = .
- Signs by quadrant. All Students Take Calculus: in Quadrant I all three are positive, in II sine, in III tangent, in IV cosine. At , in Quadrant III, tangent is positive while sine and cosine are negative.
- Sine and cosine as coordinates. On the unit circle the point at angle t is (cos t, sin t). At the point is (−, ), so cos = − and sin = .
- Tangent from sine and cosine. tan t = . At : ÷ = × = , because dividing by a fraction means multiplying by its flip.
- One number, two forms. = : multiply the top and bottom by , and the bottom becomes × = 3.
- Fractions with π. Give π or 2π the same bottom as α, then combine the tops: 2π − = − = .
- Solving a linear equation. Undo adding or subtracting first, then multiplying, doing the same to both sides: 2 sin t − 1 = 0 becomes 2 sin t = 1, then sin t = .
- One turn. 0 ≤ t < 2π includes 0 and stops short of 2π, because 2π is the same point as 0. So sin t = 0 has the answers 0 and π on the turn, and 2π is not counted.
3 Why
On the unit circle, the points with reference angle α form a family of four, one in each quadrant. Each is a mirror image of the Quadrant I point: flipped across the y-axis, across the x-axis, or across both. A mirror never changes a distance, so all four points have coordinates of the same sizes, and so the same size of sine, cosine and tangent. Only the signs differ. That is why the size of c fixes α and the sign of c picks the quadrants. Each sign shows up in exactly two quadrants, so most values of c give exactly two answers.
4 The rule
For 0 ≤ t < 2π, when c is not an axis value and the function can reach it: the size of c gives the reference angle α, the table angle whose sine, cosine or tangent has that size; the sign of c gives the two quadrants where that function has that sign; the answers are α in I, π − α in II, π + α in III and 2π − α in IV.
The axis values, 0, 1 and for sine and cosine and 0 for tangent, put the answers on the axes instead, and sine and cosine have no answer when c is above 1 or below .
The same idea, five ways
Sine of t equals c, for t from zero up to but not including two pi: find every such t.
A solution on one turn of sin t = c is an angle t with 0 ≤ t < 2π whose sine equals c. When c lies strictly between −1 and 1 and is not 0, the size of c gives the reference angle and the sign of c gives the two quadrants.
- t in [0, 2π)
- sin t = − on one turn: t = or t =
- in degrees: sin t = −, 0° ≤ t < 360°: t = 210° or t = 330°
- graph words: the t values where the line y = c meets one turn of the sine wave
Like asking at which moments of one Ferris wheel ride your seat is at a given height: once on the way up, once on the way down.
The same idea, other ways
Draw the unit circle and a horizontal line at height c. Each place the line meets the circle is a point whose sine is c, so its angle is an answer. A horizontal line at a height strictly between −1 and 1 meets the circle at two points, one on each side of the y-axis, mirror images of each other. For cos t = c, use a vertical line at x = c instead: for c strictly between −1 and 1, two points, one above and one below the x-axis. A line touching the circle at its very top or bottom, or at its far left or right, meets it once, and a line beyond the circle misses it.
You ride a Ferris wheel. Your seat starts level with the hub, on the right, 1 unit from it. As the wheel turns, the seat's height above the hub is the sine of the angle turned; below the hub counts as negative. You want a photo when you are unit below the hub. On one ride round you reach that height twice: once sinking on the left side, once rising on the right side. The first time you are past the half turn, at . The second time you are short of the full turn, at . One small angle, , places both photos.
Size picks the angle, sign picks the quadrants. First check two things: c is not an axis value (0 for all three, 1 or −1 for sine and cosine), and for sine and cosine c lies between −1 and 1. Then find the size of c in the table to get α. Use the sign of c with All Students Take Calculus to get two quadrants. Write the angle for each of those quadrants, then put both answers back into the equation.
Size picks the angle: find the size of c in the table, read α.
Sign picks the quadrants: All Students Take Calculus.
Quadrant I: t = α
Quadrant II: t = π − α
Quadrant III: t = π + α
Quadrant IV: t = 2π − α
Put each answer back into the equation.
Take the Quadrant I point at angle α, at (x, y). Flip it across the y-axis to get (−x, y), the point at π − α. Flip it across the x-axis to get (x, −y), the point at 2π − α. Flip it both ways to get (−x, −y), the point at π + α. All four have coordinates of the same sizes, so their sines, cosines and tangents have the same sizes; only the signs change. No other point on the circle has coordinates of those sizes, so every answer off the axes comes from this family, and the sign of c says which two members. Answers on the axes, for c = 0, or c = 1 or −1 with sine and cosine, sit in no quadrant and are read straight off the circle.
The picture lists the four angles with reference angle and the sine of each. Every output has size ; only the sign changes. Solving sin t = − means starting in the output row: the two cells holding − sit under and , the Quadrant III and Quadrant IV angles. Those are the answers, and sin t = gets the other two, and .
| reference angle α | in degrees | sin α | cos α | tan α |
|---|---|---|---|---|
| 30° | , also written | |||
| 45° | 1 | |||
| 60° |
Part 1: Sine: sin t = c asks for a height
Sine is the height of the point on the unit circle: positive above the x-axis, negative below it. So sin t = c asks for every point at height c. Above the axis that means Quadrants I and II; below it, Quadrants III and IV. Draw a horizontal line at height c across the circle. When c is strictly between −1 and 1, it meets the circle at two points, one on each side of the y-axis, like two riders at the same height on opposite sides of a Ferris wheel. At c = 1 or c = −1 it touches the circle once, at the top or the bottom, and past those values it misses the circle.
- Sine is the y coordinate: the height of the point.
- 0 < c < 1: Quadrants I and II, so t = α and t = π − α.
- −1 < c < 0: Quadrants III and IV, so t = π + α and t = 2π − α.
- Axis values: sin t = 0 gives t = 0 and t = π; sin t = 1 gives only t = ; sin t = −1 gives only t = .
- No solution when c > 1 or c < −1: no point on the unit circle is that high or that low.
- Pair check: the two answers add to π when 0 < c < 1 and to 3π when −1 < c < 0.
Worked example
Sin t = − on one turn
Solve sin t = − for 0 ≤ t < 2π.
Show the steps and the answer
- Say what it asks: which angles t on one turn put the point at height , below the x-axis?Sine is the height, so we know the output and look for every input angle that gives it.
- is about : between and 1, and not 0, 1 or .So there are answers, and they do not sit on the axes.
- Drop the sign: sits in the row of the column, so .The size of c names the reference angle; the sign is handled next.
- c is negative, and sine is negative in Quadrants III and IV.Below the x-axis every height is negative.
- Quadrant III: .A Quadrant III angle goes past a half turn by α; writing π as gives matching bottoms, so the tops add: 4 + 1 = 5.
- Quadrant IV: .A Quadrant IV angle stops short of a full turn by α; 2π is , and 8 − 1 = 7.
Tips and tricks
- Sine answers sit at the same height, one left and one right of the y-axis; if your two answers are not mirror images like that, recheck the quadrants.
Part 2: Cosine: cos t = c asks for a left or right position
Cosine is the x coordinate of the point: how far right of the center it sits, with left of the center counting as negative. So cos t = c asks for every point at that sideways position. Right of the y-axis means Quadrants I and IV; left of it means II and III. Draw a vertical line at x = c. When c is strictly between −1 and 1, it meets the circle at two points, one above and one below the x-axis, like the tip of a lamp post and its reflection in a still lake. At c = 1 or c = −1 it touches the circle once, at the far right or the far left, and past those values it misses the circle.
- Cosine is the x coordinate: right of center is positive, left is negative.
- 0 < c < 1: Quadrants I and IV, so t = α and t = 2π − α.
- −1 < c < 0: Quadrants II and III, so t = π − α and t = π + α.
- Axis values: cos t = 0 gives t = and t = ; cos t = 1 gives only t = 0; cos t = −1 gives only t = π.
- No solution when c > 1 or c < −1: no point on the unit circle is that far right or left.
- Pair check: for c strictly between −1 and 1, the two answers add to 2π.
- Gotcha: cos t = 1 does not give 2π, because the turn stops short of 2π.
Worked example
Cos t = on one turn
Solve cos t = for 0 ≤ t < 2π.
Show the steps and the answer
- Say what it asks: which angles t on one turn put the point to the right of center?Cosine is the x coordinate, so we know the output and look for every input angle that gives it.
- is between and 1 and is not 0, 1 or .So there are answers, and they do not sit on the axes.
- In the column of the table, sits in the row, so .Read the cosine column, not the sine column: sin is also , but that belongs to the other function.
- c is positive, and cosine is positive in Quadrants I and IV.All Students Take Calculus: All in I, Cosine in IV. Both sit right of the y-axis.
- Quadrant I: .In Quadrant I the angle is the reference angle itself.
- Quadrant IV: .A Quadrant IV angle stops short of a full turn by α; 2π is , and 6 − 1 = 5.
Tips and tricks
- Cosine answers sit at the same left or right position, one above and one below the x-axis.
Part 3: Tangent: tan t = c asks for a steepness
Tangent is the sine divided by the cosine: y divided by x. Think of it as the steepness of the spoke from the center to the point, like the slope of a ramp. It is positive where x and y have the same sign, Quadrants I and III, and negative where they differ, Quadrants II and IV. Unlike sine and cosine, tangent is not kept between −1 and 1: a spoke can be as steep as you like, so tan t = has answers. At and the x coordinate is 0, and tangent does not exist.
- Tangent is , the y coordinate divided by the x coordinate.
- Its special values come from that division, for example tan = ÷ = ; all three are in the table.
- c > 0: Quadrants I and III, so t = α and t = π + α.
- c < 0: Quadrants II and IV, so t = π − α and t = 2π − α.
- Axis value: tan t = 0 gives t = 0 and t = π. tan t = 1 and tan t = −1 are not axis values: their reference angle is .
- Never an answer: and , where cos t = 0 and tangent does not exist.
Worked example
Tan t = − on one turn
Solve tan t = − for 0 ≤ t < 2π.
Show the steps and the answer
- Say what it asks: which angles t on one turn have a tangent, y divided by x, equal to ?We know the output of tangent and look for every input angle that gives it.
- is not 0, so it is not an axis value for tangent, and there is no size limit to check.Only tan t = 0 sits on the axes, and a division can give any number.
- Drop the sign: sits in the row of the column, so .At the point has x = and y = , and ÷ = .
- c is negative, and tangent is negative in Quadrants II and IV.There x and y have opposite signs, and dividing numbers of opposite signs gives a negative.
- Quadrant II: .A Quadrant II angle stops short of a half turn by α; π is , and 3 − 1 = 2.
- Quadrant IV: .A Quadrant IV angle stops short of a full turn by α; 2π is , and 6 − 1 = 5.
Tips and tricks
- Check a tangent answer by dividing the point's y by its x: the signs of the two coordinates decide the sign of the result.
5 How
- Get the function alone on one side: sin t = c, cos t = c or tan t = c.
- Say what the question asks: every angle t with 0 ≤ t < 2π whose sine (or cosine, or tangent) equals c.
- Rule out the special cases. For sine or cosine, c > 1 or c < −1 has no solution. If c is 0, or 1 or −1 for sine and cosine, the answers sit on the axes: read them off the circle, check them and stop.
- Drop the sign of c and find that size in your function's column of the table. The angle at the start of that row is the reference angle α.
- Use the sign of c and All Students Take Calculus to pick the two quadrants where your function has that sign.
- Place α in each of those quadrants: α in I, π − α in II, π + α in III, 2π − α in IV. Rewrite π or 2π with the same bottom as α, then combine the tops.
- Check: put each answer back into the original equation. Name its quadrant and reference angle, read the size from the table, attach that quadrant's sign, and confirm you get c.
Solving a basic trigonometric equation on one turn
- Get sin t, cos t or tan t alone on one side.
- Check the special cases: no solution, or an axis value read off the circle.
- The size of c gives the reference angle α from the table.
- The sign of c gives the two quadrants, by All Students Take Calculus.
- Write the answers: α in I, π − α in II, π + α in III, 2π − α in IV.
- Put each answer back into the original equation.
6 Worked example
Worked example
Worked example: cos t = − on one turn
Solve cos t = − for 0 ≤ t < 2π. Give exact answers.
Show the steps and the answer
- Say what it asks: which angles t, from 0 up to but not including , put the point of the unit circle at , a little less than 1 unit left of the center?Cosine is the x coordinate. We know the output, so we are looking for every input angle that produces it.
- Check the special cases: is about , between and 1, and it is not 0, 1 or .Outside −1 to 1 there would be no solution, and 0, 1 or −1 would put the answers on the axes. Neither happens, so the main method applies.
- Drop the sign: the size is . In the column of the table, sits in the row, so the reference angle is .All four mirror points with reference angle have a cosine of size ; the table names the Quadrant I one.
- c is negative, and cosine is negative in Quadrants II and III.All Students Take Calculus: cosine is positive only in I (All) and IV (Calculus), so it is negative in II and III, left of the y-axis.
- Quadrant II: , which is .A Quadrant II angle stops short of a half turn by α. Writing π as gives one bottom, so the tops subtract: 6 − 1 = 5.
- Quadrant III: , which is .A Quadrant III angle goes past a half turn by α: 6 + 1 = 7.
- Both answers lie between 0 and , so both are solutions on one turn.The question asks only for angles on this turn, and 5 and 7 are both less than 12.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 6
An axis value
Solve cos t = −1 for 0 ≤ t < 2π.
Show the steps and the answer
- Say what it asks: which angles t on one turn put the point of the unit circle at ?Cosine is the x coordinate of the point, so we know the output and look for every input angle that gives it.
- is an axis value: it is the farthest left the circle reaches, and only the left point has it.The circle has radius 1, so nothing sits farther left than −1, and a vertical line at that x touches the circle at one point only.
- The left point is half a turn from the start: , which is .A half turn is π.
Rung 2 of 6
A positive value
Solve sin t = for 0 ≤ t < 2π.
Show the steps and the answer
- Say what it asks: which angles t on one turn put the point at height ?We know the output, a height, and look for every input angle that gives it.
- is about 0.87: between and 1, and not 0, 1 or .So there are answers, and they do not sit on the axes.
- In the column of the table, sits in the row, so .The size of c names the reference angle.
- c is positive, and sine is positive in Quadrants I and II.Above the x-axis every height is positive.
- Quadrant I: . Quadrant II: .A Quadrant II angle stops short of a half turn by α; writing π as gives matching bottoms, and 3 − 1 = 2.
Rung 3 of 6
A negative value, and a tempting negative angle
Solve sin t = − for 0 ≤ t < 2π.
Show the steps and the answer
- Say what it asks: which angles t on one turn put the point at height , half a unit below the center?Sine is the height, and a negative height is below the x-axis.
- Drop the sign: sits in the row of the column, so .The table gives only sizes; the sign is the next step.
- c is negative, and sine is negative in Quadrants III and IV.Below the x-axis every height is negative.
- Quadrant III: .A Quadrant III angle goes past a half turn by α; π is , and 6 + 1 = 7.
- Quadrant IV: .Gotcha: turning back from 0 gives −, which ends at the same point but is not between 0 and 2π. A full turn minus reaches that point and stays on the turn.
Rung 4 of 6
Tangent, with its own pair of quadrants
Solve tan t = for 0 ≤ t < 2π.
Show the steps and the answer
- Say what it asks: which angles t on one turn have a tangent, y divided by x, equal to ?We know the output of tangent and look for every input angle that gives it.
- is about 1.73, more than 1. That is allowed for tangent.Tangent is a division, and a division can give any number; only sine and cosine, which are coordinates, stay between −1 and 1.
- In the column, sits in the row, so .
- c is positive, and tangent is positive in Quadrants I and III.All Students Take Calculus: All in I, Tangent in III. In III both coordinates are negative, and a negative divided by a negative is positive.
- Quadrant I: . Quadrant III: .A Quadrant III angle goes past a half turn by α; π is , and 3 + 1 = 4.
Rung 5 of 6
Get the cosine alone first
Solve 2 cos t + = 0 for 0 ≤ t < 2π.
Show the steps and the answer
- Say what it asks: which angles t on one turn make equal 0? The cosine is not alone yet, so first find the value cos t must have.The table can be read only once we know the value of cos t.
- Subtract from both sides: .Undo the adding first; doing the same to both sides keeps them equal.
- Divide both sides by 2: .Undo the multiplying next. This step finds the one value of cos t that makes the left side 0.
- Drop the sign: sits in the row of the column, so .The size of c names the reference angle.
- c is negative, and cosine is negative in Quadrants II and III.Left of the y-axis every x coordinate is negative.
- Quadrant II: . Quadrant III: .Quadrant II stops short of a half turn by α and Quadrant III goes past it by α; π is .
Rung 6 of 6
Genuinely hard, a tangent value in disguise
Solve 3 tan t + = 0 for 0 ≤ t < 2π.
Show the steps and the answer
- Say what it asks: which angles t on one turn make equal 0? First find the value tan t must have.The table can be read only with tan t alone.
- Subtract from both sides: . Divide both sides by 3: .Undo the adding, then the multiplying. This finds the one value of tan t that makes the left side 0.
- Drop the sign: sits in the row of the column, so .Gotcha: some tables write this value as . It is the same number: multiplying the top and bottom of by gives , since × = 3.
- c is negative, and tangent is negative in Quadrants II and IV.There x and y have opposite signs, so y divided by x is negative.
- Quadrant II: . Quadrant IV: .Quadrant II stops short of a half turn by α, and Quadrant IV stops short of a full turn by α.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Size from the table, sign from the quadrants. The table never tells you the sign; that is always its own step.
- Quadrant shortcut: for c > 0 the answers are in Quadrant I and in your function's own quadrant from All Students Take Calculus (Sine II, Tangent III, Cosine IV); for c < 0 they are in the other two quadrants.
- Bottoms match: written in lowest terms, answers built from have 6 on the bottom (, , ), from a 4, from a 3. A different bottom on a fraction in lowest terms means an arithmetic slip.
- Pair check: two sine answers add to π when c > 0, since α + (π − α) = π, and to 3π when c < 0, since (π + α) + (2π − α) = 3π; two cosine answers always add to 2π.
- Always put each answer back: name its quadrant and reference angle, read the size, attach the sign. If you do not get c back, redo the quadrant step.
- Sketch both answers on a circle: sine answers sit at the same height, cosine answers at the same left or right position.
- Every answer must obey 0 ≤ t < 2π: no negative angles, and never 2π itself.
- You may think in degrees (30°, 150°, 210°, 330°) and convert at the end: multiply by , so 210° becomes = .
7 The trap
Stopping at the table. The table gives only the size of c, so answering t = to sin t = − loses the sign: sin is +. After the table, always pick the two quadrants from the sign of c, write an angle in each, and put both answers back into the equation.
Flash cards
Say the answer out loud, then flip.
When you solve sin t = c, cos t = c or tan t = c, what does the size of c tell you, and what does its sign tell you?
- The size of c, with its sign dropped, points to the reference angle α in the table.
- The sign of c picks the two quadrants where your function has that sign.
- Axis values are the exception: when sin t or cos t is 0, 1 or −1, or tan t is 0, the answers sit on the axes and are read straight from the circle. For example, cos t = 1 only at t = 0.
Why is t = a wrong answer to cos t = −?
- It has the wrong sign: cos = +. The table gives only the size of c.
- Cosine is negative in II and III, so place α = there.
- II: t = π − =
- III: t = π + =
Solve tan t = − for 0 ≤ t < 2π.
- The size gives α = .
- All Students Take Calculus: tangent is positive in I and III, so it is negative in II and IV.
- II: t = π − = − =
- IV: t = 2π − = − =
How many solutions does sin t = have for 0 ≤ t < 2π?
- None.
- Sine is never more than 1 or less than −1, the way a Ferris wheel seat never goes above the top of the wheel or below the bottom.
- Do not mistake , which is 1.5, for the table value , which is less than 1.