The inverse cosine
Quick review (2 minutes)
Picture a protractor, the half-circle ruler for measuring angles, with its straight edge at the bottom.
The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0, π]. So y = arccos x, also written y = x, means cos y = x and 0 ≤ y ≤ π.
Domain of arccos: [−1, 1]. Range of arccos: [0, π].
Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to . An input of 0 puts it straight up, at . A negative input puts it on the top-left quarter, so the answer is past , up to π.
In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.
Domain check: the input must be from −1 to 1. If it is not, write undefined and stop.
Sign check: a positive input lands on the top-right quarter, 0 lands straight up at , a negative input lands on the top-left quarter.
Name the special angle in that quarter whose point has the input as its x-coordinate, mirroring the positive twin when the input is negative.
Test the answer: its cosine equals the input, and it lies from 0 to π.
Find the exact value of arccos(−). In words: the input is −; find the one angle from 0 to π whose cosine is −.
arccos(−) = , which is 120°
Answering a negative input with a negative angle, the way the inverse sine does: arccos(−) = − is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past , up to π: here . Catch the slip by taking the cosine of what you wrote: cos(−) = +, the wrong sign.
one-to-one function
A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion.
horizontal line test
A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands.
restricted domain
A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
inverse cosine (arccos)
The function that takes a number from −1 to 1 and gives back the angle from 0 to π whose cosine is that number. Written arccos x or x; said ark-KOH-sine.
1 In plain words
Picture a protractor, the half-circle ruler for measuring angles, with its straight edge at the bottom. Number that edge −1 at the left end, 0 in the middle and 1 at the right end. Pick a spot on the edge, look straight up to the curved rim and read the angle there. Each spot lines up with exactly one angle, from 0° at the right end to 180° at the left. That is the inverse cosine. Cosine takes an angle and tells you how far left or right its point on the unit circle sits. The inverse cosine runs backward: give it the left-right position, and it hands back the one angle on the top half of the circle with that position.
2 Picture it
Reminder
Reminder: Cosine is the x-coordinate, Signs by quadrant, Mirror across the vertical axis, Degrees to radians, Square brackets include the end, The horizontal line test, The inverse sine's range, Rough sizes of , and π, Subtracting a negative, Fractions over a common bottom
- Cosine is the x-coordinate. The point at angle θ on the unit circle is (cos θ, sin θ): the 60° point is (, ), so cos 60° = and sin 60° = .
- Signs by quadrant. Left of the vertical axis every x-coordinate is negative, so cosine is negative in quadrant II: cos 150° = −.
- Mirror across the vertical axis. Reflecting a point across the vertical axis keeps its height, flips the sign of its x-coordinate, and turns the angle θ into 180° − θ: the 60° point (, ) becomes the 120° point (−, ).
- Degrees to radians. Multiply by and reduce: 120° × = = .
- Square brackets include the end. [0, π] contains 0 and π themselves, so arccos 1 = 0 and arccos(−1) = π are allowed answers.
- The horizontal line test. A function can be run backward only if no horizontal line crosses its graph twice: y = fails, since the line y = 4 crosses it at x = −2 and at x = 2.
- The inverse sine's range. arcsin x answers from − to , the right half of the circle, so a negative input gives a negative angle: arcsin(−) = −.
- Rough sizes of , and π. ≈ 1.41, ≈ 1.73 and π ≈ 3.14, all rounded, so ≈ 0.71, ≈ 0.87 and ≈ 1.57.
- Subtracting a negative. Subtracting a negative is adding the positive: 5 − (−2) = 5 + 2 = 7, and − (−) = + .
- Fractions over a common bottom. With matching bottoms, add the tops: + = = π. If the bottoms differ, multiply top and bottom to match first: = .
3 Why
Why not reuse the inverse sine's right half, from − to ? There the left-right position is never negative, so arccos(−) would have no answer, and positions repeat: − and both sit at . Over the top half, from 0 to π, the position slides from 1 down to −1 without turning back, so each number from −1 to 1 appears exactly once, passing the horizontal line test. The bottom half would work too. The top is the convention because it starts at 0 and puts inputs between 0 and 1 in the first quadrant, as right triangles do; calculators follow it, so another half would disagree with them.
4 The rule
The inverse cosine (arccos) is the inverse function of cosine on the restricted domain .
So arccos x, also written x, means and .
Domain of arccos: . Range of arccos: .
The same idea, five ways
Say arc cosine of x, inverse cosine of x, or cosine inverse of x. All three mean the angle whose cosine is x.
y is the inverse cosine of x when y is the angle from 0 to π, both ends included, whose cosine is x.
- y = arccos x
- cos y = x and 0 ≤ y ≤ π
- Domain: −1 ≤ x ≤ 1, written [−1, 1] or {x | −1 ≤ x ≤ 1}
- Range: 0 ≤ y ≤ π, written [0, π] or {y | 0 ≤ y ≤ π}
A protractor: pick a spot on its straight edge, look straight up, and read the one angle on the curved rim above that spot.
The same idea, other ways
Draw the unit circle and keep only its top half. Find the input on the horizontal axis, go straight up until you meet the circle, and the angle to that point is the answer. For the input you meet the point at 60°, so arccos = . For any input strictly between −1 and 1, going up you meet the circle once and going down you would meet a second point, which is why the bottom half is left out. At 1 and −1 the two halves touch, so there is only the one point.
Think of a fuel gauge whose needle swings over the top of its dial, from pointing straight right to pointing straight left, and never dips below its pivot. If someone tells you only how far left or right the tip of the needle is, you can still name the exact reading, because the needle passes over each left-right spot once. A clock hand does not work this way: it goes all the way around, and the hand pointing at 2 sits exactly as far right as the hand pointing at 4.
Walk along the top half and watch the cosine. In the table picture, the output row falls steadily from 1 down to −1 and never repeats a number, so cosine on the top half is a one-to-one function. That means you can read the table backward, from an output up to its input, and always get one answer: the highlighted − points up to .
Try the inverse sine's half, the right side from − up to . Every point there sits on or to the right of the vertical axis, so every cosine there is 0 or more: no angle on that half has cosine −. Also, the points at − and sit at the same left-right position, , so cosine on that half reaches twice and cannot be run backward. The top half fixes both problems at once.
Between 0 and 1 in, first quadrant out; 1 in, 0 out. Zero in, out. Between −1 and 0 in, second quadrant out; −1 in, π out. The answer is never negative and never more than π, which is about 3.14, and an input above 1 or below −1 has no answer.
| input x | arccos x | the same angle in degrees | arcsin x, for contrast |
|---|---|---|---|
| 1 | 0 | 0° | |
| 30° | |||
| 45° | |||
| 60° | |||
| 0 | 90° | 0 | |
| 120° | |||
| 135° | |||
| 150° | |||
| π | 180° |
5 How
- Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
- Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
- Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to . An input of 0 puts it straight up, at . A negative input puts it on the top-left quarter, so the answer is past , up to π.
- In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
- Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.
Finding arccos x exactly
- Domain check: the input must be from −1 to 1. If it is not, write undefined and stop.
- Sign check: a positive input lands on the top-right quarter, 0 lands straight up at , a negative input lands on the top-left quarter.
- Name the special angle in that quarter whose point has the input as its x-coordinate, mirroring the positive twin when the input is negative.
- Test the answer: its cosine equals the input, and it lies from 0 to π.
6 Worked example
Worked example
A negative input: arccos(−)
Find the exact value of arccos(−). In words: the input is −; find the one angle from 0 to π whose cosine is −.
Show the steps and the answer
- Check the input: is between and 1.Only numbers from −1 to 1 are left-right positions on the unit circle, so only they have an inverse cosine.
- Turn the question into a picture: find the point on the top half of the unit circle whose x-coordinate is .The cosine of an angle is the x-coordinate of its point, and the inverse cosine answers only with angles from 0 to π, which sweep the top half.
- The input is negative, so look on the top-left quarter, past .Left of the vertical axis every x-coordinate is negative, and the top-left quarter is the part of the top half that lies there.
- Start from the positive twin: the point is , so .60° is the special angle whose point sits to the right of center.
- Mirror that point across the vertical axis: it becomes , at .The mirror keeps the height, flips the sign of the x-coordinate, and turns 60° into 180° − 60°, which lands in the top-left quarter as required.
- Convert to radians: .π radians is 180°, and 120 over 180 reduces to 2 over 3 when you divide top and bottom by 60.
- Write the answer: arccos. lies from 0 to π and its cosine is −, which is exactly what the definition asks for.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 8
Rung 1: almost trivial, arccos 1
Evaluate arccos 1. In words: the input is 1; find the angle from 0 to π whose cosine is 1.
Show the steps and the answer
- Check the input: 1 is in .The square bracket at 1 means 1 itself is included.
- Find the point on the top half whose x-coordinate is 1.Cosine is the x-coordinate of the point on the unit circle.
- The only such point is (1, 0), at the far right, where you have not turned at all: the angle is 0.The circle has radius 1, so it reaches x = 1 at one point only, the starting point of every angle.
Rung 2 of 8
Rung 2: a positive input, arccos
Evaluate arccos . In words: the input is ; find the angle from 0 to π whose cosine is .
Show the steps and the answer
- Check the input: (rounded), which is between and 1. ≈ 1.73, and half of that is about 0.87.
- The input is positive, so look on the top-right quarter, from 0 up to .Right of the vertical axis every x-coordinate is positive.
- The special point there with x-coordinate is the point, .Small angle, big x: a small turn leaves the point far to the right, so 30° has the bigger x-coordinate , while 60° has .
- Convert to radians: .30 over 180 reduces to 1 over 6 when you divide top and bottom by 30.
Rung 3 of 8
Rung 3: the middle, arccos 0
Evaluate arccos 0. In words: the input is 0; find the angle from 0 to π whose cosine is 0.
Show the steps and the answer
- Check the input: 0 is between and 1.0 is the middle of the domain [−1, 1].
- Find the point on the top half whose x-coordinate is 0: it is (0, 1), straight up.An x-coordinate of 0 means neither left nor right of center, and on the top half that is the very top.
- Straight up is a quarter turn: , which is .A full turn is 2π, and a quarter of 2π is = .
Rung 4 of 8
Rung 4: the left end, arccos(−1)
Evaluate arccos(−1). In words: the input is −1; find the angle from 0 to π whose cosine is −1.
Show the steps and the answer
- Check the input: is in .The square bracket at −1 means −1 itself is included.
- Find the point on the top half whose x-coordinate is : it is , at the far left.The circle has radius 1, so it reaches x = −1 at one point only, the far left.
- Reaching the far left takes a half turn: , which is .A half turn is half of 2π.
Rung 5 of 8
Rung 5: a negative input, arccos(−)
Evaluate arccos(−). In words: the input is −; find the angle from 0 to π whose cosine is −.
Show the steps and the answer
- Check the input: (rounded), which is between and 1. ≈ 1.41, and half of that is about 0.71.
- The input is negative, so look on the top-left quarter, past .Left of the vertical axis every x-coordinate is negative.
- Start from the positive twin: the point is .45° is the special angle whose x-coordinate is .
- Mirror it across the vertical axis: , at .The mirror keeps the height, flips the sign of the x-coordinate, and lands in the top-left quarter.
- Convert to radians: .135 over 180 reduces to 3 over 4 when you divide top and bottom by 45.
Rung 6 of 8
Rung 6: the look-alike, arccos(−)
Evaluate arccos(−). In words: the input is −; find the angle from 0 to π whose cosine is −.
Show the steps and the answer
- Check the input: (rounded), which is between and 1. ≈ 1.73, and half of that is about 0.87.
- The input is negative, so look on the top-left quarter, past .Left of the vertical axis every x-coordinate is negative.
- Start from the positive twin: the point is .Small angle, big x: of 30° and 60°, the smaller angle has the bigger x-coordinate, .
- Mirror it across the vertical axis: , at .The mirror keeps the height, flips the sign of the x-coordinate, and lands in the top-left quarter.
- Convert to radians: .150 over 180 reduces to 5 over 6 when you divide top and bottom by 30.
Rung 7 of 8
Rung 7: an input that looks like an angle, arccos()
Evaluate arccos(). In words: the input is the number ; find the angle from 0 to π whose cosine is .
Show the steps and the answer
- Remember what the input is: a cosine value, a left-right position, even though looks like an angle.The inverse cosine takes a position in and gives an angle out.
- Check the input: (rounded), which is more than 1.π ≈ 3.14, and half of that is about 1.57.
- Stop: arccos() is undefined.Every point on the unit circle has its x-coordinate from −1 to 1, so no angle has cosine 1.57.
Rung 8 of 8
Rung 8: both inverses at once, arccos(−) − arcsin(−)
Evaluate arccos(−) − arcsin(−). In words: find each angle, then subtract the second from the first.
Show the steps and the answer
arccos(−) = , on the top half
arcsin(−) = −, on the right half
- Find arccos(): the input is negative, so the point is on the top-left quarter, at , which is .The inverse cosine answers on the top half, and the 135° point is (−, ).
- Find arcsin(): the input is negative, so the point is on the lower part of the right half, at , which is .The inverse sine answers on the right half, from − to , and the −45° point is (, −), whose height, the sine, is −.
- Notice that one input gave two different angles, and .The two functions answer on different halves: the inverse sine on the right side, the inverse cosine on the cap.
- Rewrite the subtraction: .Subtracting a negative is adding the positive.
- Add: .The bottoms match, so add the tops: 3π + π = 4π, and 4π over 4 is π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: Sine takes the Side, Cosine takes the Cap. Inverse sine answers sit on the right side of the circle, from − to ; inverse cosine answers sit on the cap, the top half, from 0 to π.
- Check every answer before you write it: the cosine of your answer must give back the input, and the answer must lie from 0 to π. Both checks must pass.
- Small angle, big x: a small turn leaves the point far to the right. So , the bigger x-value, goes with the smaller angle , and goes with the bigger angle .
- Pattern for checking table work: in every row of this lesson's table, arccos x and arcsin x add to . For x = −: + (−) = − = = . If your two answers do not add to , one or both are wrong: check each value and the half it sits on.
- Do not memorize the table. Rebuild any row in seconds: picture the top half of the unit circle, find the point whose x-coordinate is the input, and name its angle.
- Write the final answer as an exact value in radians, such as , not 120° or 2.09, unless the question asks for degrees or a decimal.
7 The trap
Answering a negative input with a negative angle, the way the inverse sine does: arccos(−) = − is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past , up to π: here . Catch the slip by taking the cosine of what you wrote: cos(−) = +, the wrong sign.
Flash cards
Say the answer out loud, then flip.
In plain words, what does arccos x ask for?
- The one angle from 0 to π whose cosine is x.
- Picture a protractor whose straight edge reads −1 at the left end and 1 at the right end: find x on the edge, look straight up to the rim and read the angle there.
What are the domain and range of arccos?
- Domain: [−1, 1], the inputs it accepts.
- Range: [0, π], the angles it gives back.
What is arccos(−)?
- The twin without the minus sign is arccos() = . A negative input lands on the top-left quarter, so mirror it across the vertical axis: π − = − = .
- Not −: arccos never answers below 0.
Why does arccos answer from 0 to π instead of from − to ?
- From 0 to π, the left-right position on the unit circle slides from 1 down to −1 without turning back, so each input from −1 to 1 gets exactly one angle.
- From − to , the position is never negative, and it repeats: and − both sit at .