The reciprocal and quotient identities
Quick review (2 minutes)
Every trig function can be built from two: sine and cosine.
Reciprocal identities: csc t = , sec t = , cot t = ; flipped back, sin t = , cos t = , tan t = .
Quotient identities: tan t = and cot t = .
Each holds at every angle where both sides are defined. tan t and sec t are undefined (have no value) where cos t = 0: t = + kπ, which is 90° + k · 180°. csc t and cot t are undefined where sin t = 0: t = kπ, which is k · 180°. Here k is any integer: …, −2, −1, 0, 1, 2, …
Say what the question asks: which angle goes in, and which function's value must come out.
Pick the identity: a flip of sine, cosine or tangent is a reciprocal identity; sine and cosine divided one by the other is a quotient identity.
Write the function as a fraction in sin t and cos t: csc t = , sec t = , tan t = , cot t = .
Look at the bottom. If it is 0 at your angle, the function is undefined there, and you are done.
Otherwise put in the numbers from the point (cos t, sin t) and divide: multiply by the flip, cancel, and rationalize any square root left in the bottom.
Check: multiply the answer by its partner at the same angle (sin with csc, cos with sec, tan with cot). The product must be 1. An answer of 0 is the one exception: its partner is undefined there, so check instead that the top of your fraction is 0 and the bottom is not.
The point on the unit circle at 150° is (−, ). Find tan 150°, csc 150°, sec 150° and cot 150° exactly.
tan 150° = −
csc 150° = 2
sec 150° = −
cot 150° = −
Matching by first letter. Secant starts with s like sine, so it is tempting to write sec t = . It is the other way round: secant is the flip of cosine, and cosecant is the flip of sine. Use the memory device each pair has one co (sine with cosecant, cosine with secant, tangent with cotangent), then test with a number: sec 0° must be = 1, while = has no value.
Name the input angle and the function whose value you want.
Get the point (cos t, sin t) for that angle from the unit circle, or read it from the question.
Rewrite the function in sine and cosine with its reciprocal identity or quotient identity.
Check the bottom: if it is 0 at this angle, the function is undefined there, and you are done.
Otherwise divide: multiply by the flip of the bottom, cancel, and rationalize any square root left in the bottom.
Check: multiply the answer by its partner function at the same angle; the product must be 1. If the answer is 0, its partner is undefined there, so check instead that the top of your fraction is 0 and the bottom is not.
identity
An equation whose two sides are equal at every angle where both sides make sense. You do not solve an identity for t; you use it to trade one expression for an equal one.
reciprocal identity
An identity writing one function as 1 divided by another: csc t = , sec t = , cot t = . Each pair multiplies to 1.
quotient identity
An identity writing tangent and cotangent as one function divided by another: tan t = and cot t = . A quotient is the answer to a division.
1 In plain words
Every trig function can be built from two: sine and cosine. Picture an arcade sign that says 4 tokens for 1 dollar. A second sign could say 1 token costs of a dollar. Both signs give the same deal; the second is the first turned upside down. Turning a fraction upside down gives its reciprocal. Cosecant is sine turned upside down, secant is cosine turned upside down, and cotangent is tangent turned upside down. Tangent is a quotient, the result of a division: sine divided by cosine. Each of these facts, written as an equation, is a reciprocal identity or a quotient identity. One catch: whatever sits in the bottom of a fraction must not be 0.
2 Picture it
Reminder
Reminder: The point on the unit circle, What an identity is, Dividing by a fraction, Dividing by zero, Signs in multiplying and dividing, Reducing a fraction, Rationalizing a denominator, Radians and degrees, Squaring a fraction
- The point on the unit circle. The point at angle t is (cos t, sin t): first coordinate cosine, second coordinate sine, and + = 1. At 90° the point is (0, 1), so cos 90° = 0 and sin 90° = 1.
- What an identity is. An identity is true at every angle where both sides are defined. One angle where it fails proves it false; one angle where it works proves nothing.
- Dividing by a fraction. Multiply by its flip: 1 ÷ = 1 × = .
- Dividing by zero. Dividing by 0 has no answer: 6 ÷ 0 would need a number that gives 6 when multiplied by 0, and none does. A fraction with 0 in the bottom is undefined; a 0 on top is fine, = 0.
- Signs in multiplying and dividing. Same signs give a positive, different signs give a negative: ÷ (−) = × (−4) = −2, and (−3) × (−2) = 6.
- Reducing a fraction. Divide the top and the bottom by the same number: = after dividing both by 5.
- Rationalizing a denominator. Multiply the top and the bottom by the root in the bottom: = = .
- Radians and degrees. 180° = π, so 90° = , 270° = and 30° = .
- Squaring a fraction. Square the top and the bottom: ( = .
3 Why
On the unit circle all six trig functions are read from one point (x, y) at angle t: cos t = x, sin t = y, tan t = , csc t = , sec t = and cot t = . Write cos t in place of x and sin t in place of y, and the identities in the rule appear. Also is turned upside down, so cot t = . Each new function is undefined where its bottom is 0, because dividing by 0 has no answer.
4 The rule
Reciprocal identities: ; flipped back, .
Quotient identities: and .Each holds at every angle where both sides are defined. tan t and sec t are undefined (have no value) where : , which is . csc t and cot t are undefined where : , which is . Here k is any integer: …, , 0, 1, 2, …
The same idea, five ways
Cosecant is one over sine. Secant is one over cosine. Cotangent is one over tangent. Tangent is sine over cosine, and cotangent is cosine over sine. Read csc t out loud as cosecant of t (koh-SEE-kant), sec t as secant of t (SEE-kant), and cot t as cotangent of t (koh-TAN-jent).
At every angle t where the bottom is not zero, the cosecant of t equals 1 divided by the sine of t, the secant of t equals 1 divided by the cosine of t, the cotangent of t equals 1 divided by the tangent of t, the tangent of t equals the sine of t divided by the cosine of t, and the cotangent of t equals the cosine of t divided by the sine of t.
- csc t = , for sin t ≠ 0
- sec t = , for cos t ≠ 0
- cot t = , where tan t is defined and tan t ≠ 0
- tan t = , for cos t ≠ 0
- cot t = , for sin t ≠ 0
- sin t · csc t = 1, cos t · sec t = 1, tan t · cot t = 1
- Unit circle point (x, y): tan t = , csc t = , sec t = , cot t =
- Where tan t and sec t exist: {t | cos t ≠ 0}; where csc t and cot t exist: {t | sin t ≠ 0}
- Graph words: tan t and sec t break apart where the graph of cos t crosses 0; csc t and cot t break apart where the graph of sin t crosses 0
An arcade sign that says 4 tokens per dollar and one that says dollar per token describe one deal, flipped: that is a reciprocal. A ramp's steepness, its climb divided by its run, is a quotient, the way tangent is sine divided by cosine.
csc t =
sec t =
cot t =
cot t =
a bottom of 0 means undefined
The same idea, other ways
Stand at the point on the unit circle. Its x, how far it sits right of center (negative means left), is cos t. Its y, how far it sits above center (negative means below), is sin t. Secant is 1 over the x, cosecant is 1 over the y, tangent is the y over the x, and cotangent is the x over the y. When the point is straight up, at 90°, its x is 0, so the two functions with x in the bottom, tangent and secant, are undefined there.
A farm stand sells 3 pounds of apples for 1 dollar. The same price can be written as dollar per pound. Same deal, fraction flipped: know one and you know the other. A reciprocal identity says exactly this about angles: know sin t and you know csc t, the same number flipped. Now imagine free apples, 0 dollars a pound, and ask how many pounds 1 dollar buys. No number answers that. In the same way, flipping 0 has no answer, which is why every flip breaks where the number being flipped is 0.
Two short rules carry the whole lesson. First, each pair has one co: sine goes with cosecant, cosine with secant, tangent with cotangent. Second, the bottom decides where it breaks: tangent and secant have cosine in the bottom, so they are undefined where cosine is 0 (90° and 270° in one turn, and every angle a multiple of 180° away from them); cosecant and cotangent have sine in the bottom, so they are undefined where sine is 0 (0° and 180° in one turn, and every angle a multiple of 180° away from them).
sine and cosecant
cosine and secant
tangent and cotangent
one co in every pair
cos t in the bottom: tan t, sec t
sin t in the bottom: csc t, cot t
On the unit circle, sin t is the point's y, and csc t is defined as . Multiply them: y · = = 1 whenever y is not 0. Two numbers whose product is 1 are reciprocals, so sine and cosecant are reciprocals. The same steps work for cos t = x and sec t = , and for tan t = and cot t = , whose product is = 1. And since y is sin t and x is cos t, tan t = is the same as .
At 60° the point is (, ). So sec 60° = 1 ÷ = 2 and csc 60° = 1 ÷ = = . Tangent is ÷ = , and cotangent is ÷ = = . Each pair multiplies to 1: · 2 = 1 and · = = 1.
| Identity | Bottom | The right side has no value when | Those angles in degrees | Those angles in radians |
|---|---|---|---|---|
| csc t = | sin t | sin t = 0 | ||
| sec t = | cos t | cos t = 0 | ||
| cos t | cos t = 0 | |||
| cot t = | sin t | sin t = 0 | ||
| cot t = | tan t | tan t = 0, or tan t has no value | every multiple of 90°: …, 0°, 90°, 180°, 270°, … |
Part 1: Cosecant: the flip of sine
Sine is the height of the point on the unit circle. Cosecant is that height turned upside down: 1 divided by it. A height of gives a cosecant of 2, and a height of gives 3. Think of a cake cut so each slice is of it: flip and you learn the cake makes 8 slices. Because sine sits in the bottom, cosecant is undefined wherever the height is 0, where the point lies straight right or straight left of center, at 0°, 180° and 360°.
- Formula: csc t = ; flipped back, sin t =
- On the unit circle: csc t = , the flip of the point's height
- Undefined where sin t = 0: t = kπ, that is …, −180°, 0°, 180°, 360°, …
- Sign: always the same as the sign of sin t
- Size: csc t ≤ −1 or csc t ≥ 1; it is never strictly between −1 and 1
Worked example
Cosecant at 30° and at 180°
The point at 30° on the unit circle is (, ), and the point at 180° is (−1, 0). Find csc 30° and csc 180°.
Show the steps and the answer
- Say what it asks: two inputs, and ; for each, find the output of cosecant, or show there is none.Naming the inputs and the output first tells you to use csc t = twice.
- and .Sine is the second coordinate of each point.
- .Reciprocal identity; dividing by a fraction is multiplying by its flip, and the flip of is 2.
- , so is undefined.The bottom is 0, and no number times 0 gives 1, so dividing by 0 has no answer.
- csc 30° = 2
- csc 180° is undefined
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Cosecant copies sine at the top and bottom of the circle: where sine is 1 (at 90°) cosecant is 1, and where sine is −1 (at 270°) cosecant is −1.
Part 2: Secant: the flip of cosine
Cosine is how far the point on the unit circle sits to the right of center; a negative cosine means it sits to the left. Secant is that number turned upside down: 1 divided by it. A cosine of gives a secant of 2. Think of a car that covers mile each minute: flipped, that is 2 minutes for each mile. Because cosine sits in the bottom, secant is undefined wherever the point is straight up or straight down from center, at 90° and 270°, where cosine is 0.
- Formula: sec t = ; flipped back, cos t =
- On the unit circle: sec t = , the flip of the point's x
- Undefined where cos t = 0: t = + kπ, that is …, −90°, 90°, 270°, 450°, …
- Sign: always the same as the sign of cos t
- Size: sec t ≤ −1 or sec t ≥ 1; it is never strictly between −1 and 1
Worked example
Secant at 45°, and where secant breaks
The point at 45° on the unit circle is (, ). Find sec 45°. Then find every angle t from 0° to 360° where sec t is undefined.
Show the steps and the answer
- Say what it asks: first an output, the secant at the input ; then every input from to that has no output.Two jobs: evaluate at one angle, then hunt for the trouble spots.
- .Reciprocal identity; cos 45° is the first coordinate, ; dividing by a fraction is multiplying by its flip.
- .Rationalize: multiply top and bottom by , since · = 2; then the 2s cancel.
- Set the bottom equal to 0: .This finds the angles that would put 0 in the bottom of , so we can throw them out.
- cos t is the point's x, and only where the point is straight up or straight down: and .Going once around from 0° to 360°, the circle crosses the vertical axis at exactly these two places.
- Plug them back in: gives , and gives . Neither has a value.Seeing the 0 in each bottom confirms these two angles are the trouble spots.
- sec 45° =
- sec t is undefined at t = 90° and t = 270°
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Secant equals cosine only where cosine is 1 or −1: at 0°, at 180° and at the angles that land on those points after full turns. At every other angle where secant has a value, the flip pushes secant farther from 0 than cosine.
Part 3: Tangent: sine divided by cosine
Draw the line from the center of the unit circle out to the point. Tangent says how steep that line is: how far it climbs for each 1 it runs sideways. The climb is sine and the run is cosine, so tangent is sine divided by cosine. A ramp that climbs 1 foot over a 12 foot run has steepness . When the line stands straight up or straight down, at 90° and 270°, the run is 0; a wall has no steepness number, so tangent is undefined there.
- Formula: tan t =
- On the unit circle: tan t = , the climb over the run
- Undefined where cos t = 0: t = + kπ, that is …, −90°, 90°, 270°, 450°, …
- Equal to 0 where sin t = 0: t = kπ, that is …, −180°, 0°, 180°, 360°, …
- Sign: positive where sine and cosine share a sign, negative where their signs differ
Worked example
Tangent at 120°
The point at 120° on the unit circle is (−, ). Find tan 120°.
Show the steps and the answer
- Say what it asks: the input is ; find the output of tangent.Tangent is a quotient, so both sine and cosine at 120° are needed.
- and .The point is (cos t, sin t): first coordinate cosine, second sine.
- .Quotient identity. The bottom is −, not 0, so the value exists.
- .Multiply by the flip of −, which is −2; a positive times a negative is negative; the 2s cancel.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Sign test: tangent is positive where the point's two coordinates share a sign (upper right, lower left) and negative where they differ (upper left, lower right).
Part 4: Cotangent: the flip of tangent, or cosine over sine
Cotangent is tangent turned upside down: the run of the line from the center divided by its climb. Read the ramp the other way: 12 feet of run for each foot of climb is a cotangent of 12. On the unit circle that is cosine divided by sine. The two formulas agree at almost every angle, with one catch. At 90° the point is straight up: tangent is undefined there, yet cosine over sine is = 0. So cot 90° = 0, and cosine over sine is the safe formula. Cotangent is undefined only where sine is 0, at 0°, 180° and 360°.
- Formula: cot t = , and cot t = wherever tan t is defined and not 0
- On the unit circle: cot t = , the run over the climb
- Undefined where sin t = 0: t = kπ, that is …, −180°, 0°, 180°, 360°, …
- Equal to 0 where cos t = 0: t = + kπ, that is …, −90°, 90°, 270°, …
- Sign: the same as the sign of tan t, wherever both have a value
Worked example
Cotangent at 135° and at 90°
The point at 135° on the unit circle is (−, ), and the point at 90° is (0, 1). Find cot 135° and cot 90°.
Show the steps and the answer
- Say what it asks: two inputs, and ; for each, find the output of cotangent.Naming the inputs first warns you that 90° is a multiple of 90°, where cosine over sine is the formula to use.
- .Quotient identity: cotangent is cosine over sine, and sin 135° = is not 0.
- .A number divided by itself is 1, and the minus sign stays.
- .The point at 90° is (0, 1), so the top is 0 and the bottom is 1. A 0 on top is fine; only a 0 in the bottom is trouble.
- cot 135° = −1
- cot 90° = 0
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Where one of tangent and cotangent is 0, the other is undefined: at 0° tangent is 0 and cotangent is undefined; at 90° tangent is undefined and cotangent is 0.
5 How
- Say what the question asks: which angle goes in, and which function's value must come out.
- Pick the identity: a flip of sine, cosine or tangent is a reciprocal identity; sine and cosine divided one by the other is a quotient identity.
- Write the function as a fraction in sin t and cos t: csc t = , sec t = , tan t = , cot t = .
- Look at the bottom. If it is 0 at your angle, the function is undefined there, and you are done.
- Otherwise put in the numbers from the point (cos t, sin t) and divide: multiply by the flip, cancel, and rationalize any square root left in the bottom.
- Check: multiply the answer by its partner at the same angle (sin with csc, cos with sec, tan with cot). The product must be 1. An answer of 0 is the one exception: its partner is undefined there, so check instead that the top of your fraction is 0 and the bottom is not.
Finding csc, sec, tan or cot at one angle
- Name the input angle and the function whose value you want.
- Get the point (cos t, sin t) for that angle from the unit circle, or read it from the question.
- Rewrite the function in sine and cosine with its reciprocal identity or quotient identity.
- Check the bottom: if it is 0 at this angle, the function is undefined there, and you are done.
- Otherwise divide: multiply by the flip of the bottom, cancel, and rationalize any square root left in the bottom.
- Check: multiply the answer by its partner function at the same angle; the product must be 1. If the answer is 0, its partner is undefined there, so check instead that the top of your fraction is 0 and the bottom is not.
6 Worked example
Worked example
All four values at 150°
The point on the unit circle at 150° is (−, ). Find tan 150°, csc 150°, sec 150° and cot 150° exactly.
Show the steps and the answer
- Say what it asks: the input is the angle , and four outputs are wanted, the values of tan, csc, sec and cot there.Naming the input and the outputs first tells you which identities to reach for.
- Read the point: and . Neither is 0.The point at angle t is (cos t, sin t). With no 0 in either possible bottom, all four values exist.
- .Quotient identity: tangent is sine over cosine. Dividing by a fraction is multiplying by its flip; a positive times a negative is negative; then the 2s cancel.
- , so .Rationalize: multiplying top and bottom by keeps the value and clears the root from the bottom, since · = 3.
- .Reciprocal identity: cosecant is the flip of sine, and the flip of is 2.
- .Reciprocal identity: secant is the flip of cosine. The flip of − is −, and multiplying top and bottom by rationalizes it.
- .Quotient identity: cotangent is cosine over sine. Multiply by the flip of , which is 2, and the 2s cancel.
- csc 150° = 2
- sec 150° = −
- cot 150° = −
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
A flip of 1
The point at 90° on the unit circle is (0, 1). Find csc 90°.
Show the steps and the answer
- Say what it asks: the input is ; find the output of cosecant.Cosecant is the flip of sine, so the only number needed is sin 90°.
- .Sine is the second coordinate of the point (0, 1).
- .Reciprocal identity; the bottom is 1, not 0, and 1 divided by 1 is 1.
Rung 2 of 7
A flip of a fraction
At some angle t, sin t = . Find csc t.
Show the steps and the answer
- Say what it asks: the sine at some angle is given; find the cosecant at the same angle.The angle itself is never needed: csc t = uses only sin t.
- .Reciprocal identity.
- .Dividing by a fraction is multiplying by its flip, and the flip of is .
Rung 3 of 7
Flipping back
At some angle t, sec t = −. Find cos t.
Show the steps and the answer
- Say what it asks: this time the secant is given; find the cosine at the same angle.The question runs the reciprocal identity in the other direction.
- .Reciprocals work both ways: if secant is the flip of cosine, then cosine is the flip of secant.
- .Multiply by the flip. The flip of − is −; flipping never changes the sign.
Rung 4 of 7
All four from a point
The point (, ) lies on the unit circle at some angle t. Find csc t, sec t, tan t and cot t.
Show the steps and the answer
- Say what it asks: the point is given; find four outputs at its angle.The angle itself is never needed, only its cosine and sine, and the point gives both.
- Check the point: .Every point on the unit circle has + = 1, so this confirms the point really lies on it.
- and . Neither is 0.The point is (cos t, sin t), and bottoms that are not 0 mean all four values exist.
- and .Reciprocal identities: cosecant flips sine and secant flips cosine; dividing 1 by a fraction gives its flip.
- .Quotient identity, sine over cosine: multiply by the flip, then divide top and bottom by 5.
- .Quotient identity, cosine over sine: the same steps the other way up, then divide top and bottom by 5.
- csc t =
- sec t =
- cot t =
Rung 5 of 7
A square root in the bottom
The point at 30° on the unit circle is (, ). Find sec 30° exactly.
Show the steps and the answer
- Say what it asks: the input is ; find the output of secant as an exact number.Exact means fractions and roots, not a rounded decimal.
- .Reciprocal identity; cos 30° is the first coordinate, , which is not 0.
- .Dividing by a fraction is multiplying by its flip.
- .Rationalize: multiplying top and bottom by keeps the value and turns the bottom into 3.
Rung 6 of 7
An angle where two have no value
The point at 270° on the unit circle is (0, −1). Find tan 270°, sec 270°, csc 270° and cot 270°, or say which ones are undefined.
Show the steps and the answer
- Say what it asks: the input is ; for each of four functions, find the output or show there is none.At angles on the axes some bottoms are 0, so each function must be tested on its own.
- and .Read the point (0, −1): first coordinate cosine, second sine.
- , so is undefined.Quotient identity; the bottom is 0, and dividing by 0 has no answer.
- , so is undefined.Reciprocal identity with the same bottom, cos 270° = 0.
- .Reciprocal identity; the bottom is −1, not 0, and 1 divided by −1 is −1.
- .Quotient identity; a 0 on top is allowed, and 0 divided by any number that is not 0 is 0.
- tan 270° is undefined
- sec 270° is undefined
- csc 270° = −1
- cot 270° = 0
Rung 7 of 7
Radians, negatives and roots together
The point at t = on the unit circle is (−, −). Find csc t, sec t, tan t and cot t exactly.
Show the steps and the answer
- Say what it asks: the input is ; find four outputs there.Naming the input and the outputs tells you to use all four identities.
- .Since π = 180°, = 30°. Seeing 210° helps you picture the point down and to the left.
- and . Neither is 0.The point is (cos t, sin t), so all four values exist.
- .Reciprocal identity; the flip of − is −2.
- .Reciprocal identity; flip, then rationalize by multiplying top and bottom by .
- .Quotient identity; a negative times a negative is positive; cancel the 2s; rationalize.
- .Quotient identity, cosine over sine; negative times negative is positive, and the 2s cancel.
- csc = −2
- sec = −
- cot =
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: each pair has one co. Sine goes with cosecant, cosine goes with secant, tangent goes with cotangent.
- Check every answer by multiplying it by its partner at the same angle: the product must be 1. For example sin 30° · csc 30° = · 2 = 1. An answer of 0 is the one exception: cot 90° = = 0 is right, but its partner tan 90° is undefined, so there is no product to take.
- A function and its partner always share a sign, because flipping a fraction never changes its sign: if cos t is negative, sec t is negative too.
- Sine and cosine never go below −1 or above 1, so their flips never land strictly between −1 and 1: always csc t ≤ −1 or csc t ≥ 1, and the same for sec t. A secant of signals a mistake.
- Picture the trouble spots: tangent and secant break where the point is straight up or straight down (x = 0, at 90° and 270°); cosecant and cotangent break where it is straight right or straight left (y = 0, at 0° and 180°).
- Shortcut: when two fractions share a bottom, dividing them leaves the tops: ÷ = = , because the two 2s cancel after the flip.
- Most calculators have no csc, sec or cot key. For csc or sec, find sin or cos first, then press 1 ÷ that value. For cot, divide cos by sin: 1 ÷ tan gives the same number wherever tan has a value other than 0, but it fails at an angle such as 90°, where tan 90° is undefined and cot 90° = 0. The key marked is not cosecant: it turns a number back into an angle, a different job.
7 The trap
Matching by first letter. Secant starts with s like sine, so it is tempting to write sec t = . It is the other way round: secant is the flip of cosine, and cosecant is the flip of sine. Use the memory device each pair has one co (sine with cosecant, cosine with secant, tangent with cotangent), then test with a number: sec 0° must be = 1, while = has no value.
Flash cards
Say the answer out loud, then flip.
Is secant the reciprocal of sine or of cosine?
- Cosine: sec t = .
- Remember each pair has one co: sine with cosecant, cosine with secant, tangent with cotangent.
How do you write cot t using only sin t and cos t?
- cot t = . This is a quotient identity.
- Cotangent is tangent turned upside down. Since tan t = , the top and bottom trade places.
At which angles are tan t and sec t undefined, and why?
- Where cos t = 0: t = + kπ, which is 90° + k · 180°, for any integer k.
- Both have cos t in the bottom (tan t = and sec t = ), and dividing by 0 has no answer.
If sin 45° = , what is csc 45°?
- csc 45° = = 1 ÷ = , because dividing by a fraction means multiplying by its flip.
- Rationalize to clear the root from the bottom: × = = .
- Check: × = = 1.