Trigonometry overview
Read the units in order. Open rules, recipes and traps from their lessons.
Angles and their measure
- The pieces of an angle and how to name them
- An angle records a turn and its direction
- Coterminal angles: keep the landing, change the journey
- A common start makes the landing place meaningful
- Angle sizes and two ways to fill a corner
- Degrees, minutes and seconds: smaller pieces of a turn
- Radians count radius-lengths of curved distance
- Convert the unit, then locate a radian angle
- Arc length: how far you travel around the rim
- Sector area: how much of the disk you keep
The unit at a glance
Rules
A line has no endpoints, a line segment has two, and a ray has one. In ray OP, O is the endpoint. In ∠AOB, O is the vertex; ∠BOA names the same geometric corner.
Positive angle: counterclockwise rotation. Negative angle: clockwise rotation. The sign depends only on the direction of the turn, regardless of the initial side.
An integer n counts complete laps and may be positive, negative, or zero. 360°n means 360° × n.
In degrees, all angles coterminal with θ have measures θ + 360°n, where n is any integer. For a one-turn representative use 0° ≤ θ < 360°: an angle that ends on the initial ray, such as 360° or −720°, has one-turn representative 0°.
Coordinates (x, y) give the horizontal position first and vertical position second; (0, 0) records zero in both directions.
Standard position means vertex at (0, 0) and initial side on the positive x-axis. The Roman numerals I, II, III, IV mean 1, 2, 3, 4 and name the regions upper right, upper left, lower left, lower right, in counterclockwise order. A quadrantal angle ends on an axis.
Acute: 0° < θ < 90°. Right: θ = 90°. Obtuse: 90° < θ < 180°. Straight: θ = 180°. Positive complements sum to 90°; positive supplements sum to 180°.
1° = 60′ = 3600″ and 1′ = 60″. Decimal degrees = D + + . For subtraction: 90° = 89°59′60″ and 180° = 179°59′60″.
Here D, M, and S count degrees, minutes, and seconds, respectively.
For a nonnegative central opening, θ = radians, where s is the chosen arc length and r > 0 is the radius; signed turns use the direction rule.
180° = π radians; a full revolution is 360° = 2π radians.
Degrees → radians: multiply by . Radians → degrees: multiply by .
Radian coterminal angles are θ + 2πn, where n is any integer; reduce to 0 ≤ θ < 2π before locating the terminal side.
s = rθ; θ = ; r = when θ > 0. θ must be in radians.
For one physical slice, r > 0 and 0 ≤ θ ≤ 2π; arc length is a nonnegative size, also called its magnitude.
A = θ, with θ in radians; for degrees use A = π.
For one physical slice, r > 0 and 0 ≤ θ ≤ 2π in radians; sector area is a nonnegative size, also called its magnitude.
Recipes
- Count the endpoints to decide whether you have a line, line segment or ray.
- For a ray, write the endpoint first and then any point farther along it.
- For an angle, identify the shared endpoint and put its letter in the middle.
- Use one point from each side as the other two letters. A single letter such as θ or a number such as 1 can also label the angle.
- In the table picture, the column under θ gives theta and THAY-tuh. Read each Greek letter by its own name before using it to label an angle.
- Locate the initial side, the hand's starting position.
- Follow the curved arrow from that starting ray to the terminal side.
- Use a positive sign for counterclockwise and a negative sign for clockwise.
- Count the whole movement, including any full laps. Do not assign a sign from the ending ray's location.
- Keep the initial side fixed. A shared terminal ray alone is not enough if the starting rays differ.
- If the measurement is negative, add 360° until it is at least 0°.
- If it is 360° or more, subtract 360° until it is less than 360°.
- For two positive and two negative answers, continue adding or subtracting full turns until you have two distinct answers of each sign.
- Check each answer by subtracting the original measure. The difference must be an integer multiple of 360°.
- Check that the vertex is at the origin and the initial side points right. Otherwise the angle is not in standard position.
- Draw the landmarks: right 0°, up 90°, left 180°, down 270°, right again 360°.
- Locate the terminal ray between two landmarks and name the quadrant, starting I in the upper right.
- If the terminal ray is exactly on an axis, call the angle quadrantal and name the axis instead of a quadrant.
- For several turns, remove complete revolutions before comparing to the landmarks.
- In the table picture, read a column under Positive x-axis, right, then compare the matching information below it. Each column preserves one complete row of the reference table.
- Compare the angle to 0°, 90° and 180° to classify its size.
- For a complement, subtract from 90° and require the result to be positive.
- For a supplement, subtract from 180° and require the result to be positive.
- Add the proposed pair to check the total. Do not use a negative leftover as a positive complement.
- In the table picture, read a column under Acute angle, then compare the matching information below it. Each column preserves one complete row of the reference table.
- For DMS subtraction, align the degree, minute and second columns. If needed, borrow one degree as 60 minutes, then one minute as 60 seconds.
- Subtract each column after the units are available. Check by adding your answer to the original angle.
- For DMS to decimal degrees, keep the degrees and add minutes ÷ 60 and seconds ÷ 3600.
- For decimal degrees to DMS, keep the whole degrees. Multiply only the leftover decimal by 60; keep its whole minutes.
- Multiply the new leftover decimal minute by 60 for seconds. Round at the end; if seconds round to 60, carry one minute. If minutes reach 60, carry one degree.
- In the table picture, read a column under Degree, °, then compare the matching information below it. Each column preserves one complete row of the reference table.
- Locate the center and the two radii forming the central angle. Follow the curved arc between their endpoints, because s measures the edge rather than a straight shortcut.
- Express s and r in the same length unit, because their ratio must compare equal kinds of length.
- Divide arc length by radius: θ = . The result counts radius-lengths, so it is in radians.
- Write a degree sign for degrees. For radians, write the word when clarification helps; the instructor's notation usually omits a unit symbol.
- Rebuild familiar angles from the half-turn fact 180° = π. The table is a reference you can reconstruct, not a separate set of facts to memorize.
- In the table picture, the column under 30° gives because six 30° pieces make 180°. Read the other columns the same way and rebuild each from 180° = π.
- Identify the starting unit. A degree sign means degrees; the instructor's angle notation without that sign means radians.
- Write the multiplier with the starting unit on the bottom, because the matching unit on top and bottom then cancels.
- Multiply the numerators and denominators and reduce common factors. Treat π as one factor, because it cancels only against another π.
- Keep an exact π fraction when possible. If a decimal degree answer is requested, calculate from the exact expression and round at the end.
- To locate a radian angle, add or subtract 2π until it is in 0 ≤ θ < 2π. Use a common denominator when adding or subtracting π fractions.
- Compare with the exact quarter-turn boundaries. Equality means the angle is quadrantal and belongs to no quadrant; decimal landmarks are rounded guides.
- In the table picture, read a column under I, then compare the matching information below it. Each column preserves one complete row of the reference table.
- Identify the chosen arc, its radius and its central angle. Use the physical opening's nonnegative size, because the length measures distance rather than clockwise or counterclockwise direction. Magnitude means size with the direction sign removed: −75° has magnitude 75°. A chosen 300° arc remains 300°; using 60° would select a different arc.
- If the angle is in degrees, convert it to radians first by multiplying by .
- Choose the form that isolates the missing quantity: multiply rθ for length, divide s by r for angle, or divide s by θ for radius.
- Use matching length units for s and r. Keep exact π expressions through the calculation and round only the final decimal answer.
- Check independently using the angle's fraction of a full turn times the circumference. For a slice no larger than the whole circle, its arc cannot exceed 2πr.
- Identify the sector, the filled slice between two radii and their arc, because area measures the inside rather than the rim.
- Use the physical slice's nonnegative opening. Convert a degree measurement to radians before using A = θ. A 300° sector is the large slice; replacing it by 60° changes the chosen region. Magnitude means the nonnegative size of the stated opening.
- Square the radius first: means r × r. Multiply that result by the radian angle and by .
- Keep π exact when possible, then round only the final requested decimal. Label the result in square units.
- Check with the slice's fraction of 360° times π. A slice no larger than the full disk cannot have more than the disk's area.
Traps
Naming the angle ∠OAB. Its middle letter is A, so that name asks for a corner at A. Point to the hinge first, then put its letter in the middle.
Calling an angle negative because its terminal side points downward. You can turn counterclockwise through 300° and end downward. The arrow's direction gives the sign; the final location does not.
Subtracting 180° to make an angle smaller. A half turn points in the opposite direction. Use a whole 360° turn when you must keep the same terminal side.
Saying an angle of 90° is in Quadrant I. The upper-right region ends before its boundary. Exactly 90° is on the positive y-axis.
Interchanging complement and supplement. Remember C comes before S: Complement fills the smaller 90° corner; Supplement fills the larger 180° corner.
Treating DMS as decimal digits. 6′ is ° = 0.1°, not 0.06°. Borrow and carry in groups of 60, not 100.
Reading 30 and 30° as the same angle. In the instructor's angle notation, a number without a degree sign is in radians. Write ° whenever the measurement is in degrees, and say radians when a bare number could be unclear.
Using a rounded boundary such as 1.57 as though it were exactly . An angle of 1.57 radians is slightly below the exact axis value. Use exact π boundaries for exact angles, and use the decimals only when the angle lies clearly between them.
Putting 75 directly into s = rθ when the opening is 75°. The formula counts radius-lengths, so θ must be radians. Write the conversion before substituting, and keep the answer in a length unit rather than degrees.
Using r instead of , or reporting area in centimeters. Write the radius multiplication explicitly, such as = 7 × 7 = 49, and give square units. The angle must also be in radians for A = θ.
Trigonometric functions
- Right triangles and the names of their sides
- The six trig functions of an acute angle
- The fundamental identities
- The special angles: 30°, 45° and 60°
- Using the identities: rewrite and prove
- Definition 2: a point on the terminal side
- Quadrantal angles and undefined values
- Signs by quadrant: find the quadrant first
- Definition 3: the unit circle
- Calculator values: DEG or RAD mode
The unit at a glance
Rules
For an acute angle θ of a right triangle: hyp faces the 90° corner; opp is the leg facing θ; adj is the leg touching θ. The hypotenuse is excluded when naming adj.
The two acute angles add to 90°.
For an acute angle in a right triangle: sin θ = , cos θ = , tan θ = .
csc θ = , sec θ = , cot θ = .
θ + θ = 1 for every angle. tan θ = and sec θ = require cos θ ≠ 0; cot θ = and csc θ = require sin θ ≠ 0.
Where both reciprocal expressions exist, cot θ = . θ + 1 = θ requires cos θ ≠ 0; θ + 1 = θ requires sin θ ≠ 0.
45°, 45°, 90°: sides 1, 1, . 30°, 60°, 90°: the side across from 30° is 1, across from 60° is , across from 90° is 2. sin 30° = , sin 45° = , sin 60° = ; the cosines are the same list in reverse order. For an angle that makes full turns and then ends on an acute ray, we define its trig values to be those of that acute direction; this extends the triangle definition using the terminal side.
For an acute angle, cos θ = and tan θ = . An identity holds on its common domain. Use sin θ ≠ 0 when dividing by sin θ and cos θ ≠ 0 when dividing by cos θ.
r = > 0. sin θ = , cos θ = , tan θ = (x ≠ 0), cot θ = (y ≠ 0), sec θ = (x ≠ 0), csc θ = (y ≠ 0).
sin θ = y and cos θ = x at the axis points with r = 1.
tan θ and sec θ are undefined at θ = 90° + n·180°; cot θ and csc θ are undefined at θ = n·180°, where n is any integer (positive, negative or zero). In radians these are + nπ and nπ.
Inside Quadrants I, II, III, IV, the positive functions are respectively: all six; sin and csc; tan and cot; cos and sec. Every remaining function is negative.
θ + θ = 1 gives the missing magnitude. The quadrant chooses the sign of sin θ or cos θ in front of its nonnegative square root.
+ = 1 and P(t) = (cos t, sin t). tan t = and sec t = require x ≠ 0; cot t = and csc t = require y ≠ 0.
P(t ± π) = (−x, −y); P(−t) = (x, −y); P(t + 2nπ) = (x, y), where n is any integer.
Use DEG for degrees and RAD for radians. Here an angle with no unit means radians.
sec θ = requires cos θ ≠ 0; csc θ = and cot θ = require sin θ ≠ 0. Round only the final value, retaining requested trailing zeros.
Recipes
- Find the square corner. The side across from it is the hypotenuse; label it hyp.
- Put your finger on the angle the problem asks about.
- Of the two legs, the one touching that angle is adj.
- The leg that does not touch that angle is opp.
- If the problem switches to the other acute angle, swap opp and adj. The hyp stays the same.
- Name opp, adj and hyp from the angle asked about.
- If a side is missing, find it with the Pythagorean theorem.
- Write sin, cos and tan with SOH-CAH-TOA.
- Flip each one: csc is sin upside down, sec is cos upside down, cot is tan upside down.
- Reduce every fraction and rationalize any square root left on the bottom.
- Read squared notation first: θ = (sin θ. Square the trig value, not the angle.
- If the given value is csc or sec, flip it to obtain sin or cos. If it is cot, its reciprocal gives tan only when cot is nonzero and tan exists.
- If sin or cos is known, substitute into θ + θ = 1. Subtract its square from both sides to isolate the missing square.
- Take the nonnegative square root to find the size. For an acute angle the missing sine or cosine is positive, so choose that sign. is 0, not positive.
- If tan is known, use θ + 1 = θ, choose positive sec for an acute angle, then flip for cos. Multiply tan by cos for sin.
- Use tan = sin ÷ cos and cot = cos ÷ sin when their denominators are nonzero. Flip cosine for secant and sine for cosecant.
- Reduce and rationalize. Check that the squares add to 1 and each reciprocal pair multiplies to 1.
- Sketch the triangle that contains your angle and write its three sides.
- Stand at your angle and name opp, adj and hyp.
- Read sin, cos and tan with SOH-CAH-TOA.
- Flip for csc, sec and cot, and rationalize.
- Use the sine reference diagram for the three acute special angles: each input and its exact output share one column. The axis lesson will add the two endpoint columns at 0° and 90°.
- State the allowed inputs before rewriting: tan and sec need cos θ ≠ 0; cot and csc need sin θ ≠ 0. A displayed fraction also needs its denominator nonzero.
- Pick the messier side, usually the one with more terms or fractions.
- Rewrite every tan, cot, sec and csc using sin θ and cos θ.
- Combine fractions over a common denominator, or multiply out brackets.
- Replace 1 − θ with θ, 1 − θ with θ, and θ + θ with 1.
- Cancel common factors only when those factors are nonzero. Stop at the other side; preserve the original allowed inputs.
- Write down x and y with their signs.
- Find r = and simplify the root. r is always positive.
- sin θ = and cos θ = : reduce, then rationalize.
- tan θ = and cot θ = : r is not involved.
- sec θ = and csc θ = : the flips of cos and sin.
- Check each sign directly: r > 0; a ratio is negative when its numerator and denominator have opposite signs. We will organize these signs by quadrant in a later lesson.
- If this is a quadrantal angle, add or subtract full turns until 0° ≤ θ < 360°; in radians use turns of 2π.
- Match its terminal side to (1, 0), (0, 1), (−1, 0) or (0, −1).
- Read sin θ = y and cos θ = x.
- Write tan = , cot = , sec = and csc = .
- Inspect every denominator first. A zero denominator gives undefined; otherwise do the division.
- For each clue, list every quadrant where it is true. A zero value points to an axis instead.
- Keep only the quadrants shared by every clue. If more than one remains, report that the information does not determine one quadrant.
- Use θ + θ = 1 to isolate the square of the missing partner.
- Take the nonnegative square root for its magnitude, then attach the sign required by the quadrant.
- Compute tan = , cot = , sec = and csc = , checking denominators.
- Check the squared identity and every sign against the clues.
- For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.
- Read x and y from the Terminal point P(t), and check + = 1 if a point is supplied.
- Write cos t = x and sin t = y.
- Use tan = , cot = , sec = and csc = , checking each denominator.
- For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.
- For several moves, apply them one at a time and check the resulting quadrant.
- Read the angle unit from the degree sign or words. If none is written, this course means radians.
- Set DEG or RAD before entering the angle, and use parentheses around an entire fraction, negative angle or multiple of π.
- Use the function key if available. Otherwise compute sec = 1 ÷ cos, csc = 1 ÷ sin, cot = cos ÷ sin, all with the same angle and mode.
- Check whether an exact axis input makes the needed denominator zero. If it does, write undefined rather than trusting a very large calculator display.
- Keep the unrounded value in calculator memory while doing reciprocals or other arithmetic.
- For p decimal places, inspect digit p + 1: 0 through 4 leaves digit p unchanged; 5 through 9 rounds the magnitude up. Restore the sign and keep exactly p places.
Traps
Calling the hypotenuse the adjacent side. The hypotenuse also touches θ, but it is never called adjacent. Name the hypotenuse first, set it aside, and only then decide which of the two legs touches θ.
Naming sides by where they sit on the page. Figures put the angle in different corners, so the leg on the left is not always adjacent. Always name the sides from the angle's point of view.
Reading θ as sin(). θ means (sin θ: find sine first, then square its value. Also, θ + θ = 1 relates squares; sin θ + cos θ is usually not 1. With sine and cosine , the ordinary sum is .
Swapping the 30° and 60° values. The shortest side, 1, faces the smallest angle, 30°, so sin 30° = is the small sine and sin 60° = (about 0.866) is the large one. From 0° to 90°, sine grows as the angle grows.
Testing one angle and calling the identity proved. One angle can agree by coincidence; a proof needs algebra that works for every θ. Use a test angle only to check your algebra afterward.
Giving r a sign. r is a distance, so it is positive even when x and y are negative. Every minus sign in the answers comes from x or y, never from r.
Writing 0 when the answer is undefined, or the reverse. = 0 is a real value; has no value. Look at which coordinate sits on the bottom before you answer.
Taking the positive square root out of habit. The principal square root, written , is nonnegative, including = 0. A missing sine or cosine can still be negative: choose its sign from the quadrant. When a sign clue leaves two possible quadrants, keep both instead of guessing.
Swapping x and y. The point is P(t) = (cos t, sin t): cosine comes first, as x does. Alphabetical order helps: c before s, x before y.
Leaving the calculator in the wrong mode. Before any calculator question, look for a degree sign and set the mode. Quick test: sin 30 should show 0.5 in DEG mode.
Properties of the trigonometric functions
- Sine and cosine: every input works, and the output stays between −1 and 1
- Quadrantal angles: where tan, cot, sec and csc break
- The range of tan, cot, sec and csc
- Periodic functions: the values repeat every lap
- Signs of the six functions in the four quadrants
- Which quadrant is the angle in?
- Increasing and decreasing: where sine and cosine rise and fall
- Even and odd: what a minus sign inside does
- Combining properties to find signs and known exact values
- All six functions from one value and a quadrant
The unit at a glance
Rules
For sin t and cos t: domain (−∞, ∞), all real numbers; range [−1, 1]. Thus −1 ≤ sin t ≤ 1 and −1 ≤ cos t ≤ 1. Absolute value |a| means a number's distance from 0, so the notes' |sin t| ≤ 1 and |cos t| ≤ 1 say the same thing.
tan t and sec t: t ≠ + nπ, or t ≠ 90° + n·180°. cot t and csc t: t ≠ nπ, or t ≠ n·180°. An integer is a number such as −2, −1, 0, 1 or 2; n may be any integer. The notes write the same exclusions as ± nπ and ±nπ. Every other real input is allowed.
tan t and cot t have range (−∞, ∞). sec t and csc t have range (−∞, −1] ∪ [1, ∞), meaning an output ≤ −1 or ≥ 1. To test a proposed secant or cosecant output v, first require v ≠ 0, then check that belongs to [−1, 1].
A positive repeat k preserves the domain in both directions and satisfies f(t + k) = f(t) wherever defined. A function with such a repeat is periodic. If there is a smallest positive repeat, it is the period. For any integer n: sin(t ± 2nπ) = sin t, and the same for cos, sec and csc; tan(t ± nπ) = tan t, and the same for cot. Degree repeats are 360° and 180°, respectively. In degrees, sin t = sin(t ± n·360°), with integer n; likewise cos, sec and csc.
Inside a quadrant: I has all six positive. II has sin and csc positive. III has tan and cot positive. IV has cos and sec positive. Each unlisted function is negative. Axis points need their actual coordinates, because a value may be 0 or undefined.
I: 0 < t < . II: < t < π. III: π < t < . IV: < t < 2π. Reduce to 0 ≤ t < 2π, or 0° ≤ θ < 360°. A multiple of or 90° lies on an axis, not in a quadrant.
On a chosen interval, increasing means > gives f() > f(); decreasing means > gives f() < f(). On [0, 2π], sin increases on [0, ] and [ , 2π], and decreases on [ , ]. cos decreases on [0, π] and increases on [π, 2π].
An even or odd function has a domain that contains −t whenever it contains t. For every t in that domain, even means f(−t) = f(t), and odd means f(−t) = −f(t). Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd. Even graphs are symmetric about the y-axis, meaning the two sides match when folded across that axis. Odd graphs are symmetric about the origin, meaning a half turn around the origin leaves the graph unchanged.
Handle the input's minus sign, remove whole periods, identify a quadrant or an axis, then use a known exact value or a suitable identity. For an unfamiliar angle, the properties can determine a sign or a smaller equivalent expression without determining a special exact value.
θ + θ = 1. Thus cos θ = ± and sin θ = ±, with the sign chosen by the quadrant. Then tan θ = , cot θ = , sec θ = , csc θ = , wherever the denominator is nonzero.
Recipes
- 1. Read the question: is it about an input t (domain) or about an output value (range)?
- 2. Domain of sin or cos: the answer is always yes, for any number in degrees or radians, positive or negative.
- 3. Range of sin or cos: check whether the value is between −1 and 1, endpoints included. If it is, yes; if it is bigger than 1 or smaller than −1, no.
- 4. Unmask disguised numbers before comparing: π ≈ 3.14 and = 1.5 are outside, while ≈ 0.87 is inside.
- Read a reference-table entry in the column under its input or category in the matching picture.
- 1. If the angle is negative or at least a full turn, add or subtract full turns (2π or 360°) to bring it between 0 and 2π.
- 2. Check whether it is a quarter-turn mark: 0 gives (1, 0), (90°) gives (0, 1), π (180°) gives (−1, 0), (270°) gives (0, −1). If it is none of these, all six functions are defined.
- 3. On the y-axis (x = 0): tan and sec are undefined, while cot and csc have values.
- 4. On the x-axis (y = 0): cot and csc are undefined, while tan and sec have values. In a table, write 'undefined' or 'n/a', as the notes do.
- Read a reference-table entry in the column under its input or category in the matching picture.
- 1. For a tangent or cotangent range question, answer yes for every real output.
- 2. For secant or cosecant, first reject 0 because its reciprocal is undefined.
- 3. For any other proposed output, ignore its sign and check its distance from 0.
- 4. A size of at least 1 is allowed. A size less than 1 is impossible.
- 5. To verify the decision, flip a nonzero proposed output. It must become an allowed sine or cosine between −1 and 1.
- Read a reference-table entry in the column under its input or category in the matching picture.
- 1. Identify the requested function and its period: 2π (360°) for sin, cos, sec and csc; π (180°) for tan and cot.
- 2. Add whole periods to a negative angle, or subtract them from an angle at least one period, until 0 ≤ reduced angle < period.
- 3. Use a known special or axis value if the reduced angle is one you know. Other angles may permit a sign decision without a familiar exact value.
- 4. The original expression has exactly the same output, sign included. If the reduced expression is undefined, the original one is also undefined.
- Read a reference-table entry in the column under its input or category in the matching picture.
- 1. If the question gives a quadrant, locate that region in the picture and write its x and y signs: I (+, +), II (−, +), III (−, −), IV (+, −).
- 2. Use sin t = y and cos t = x. A positive sign means an output greater than 0; a negative sign means an output less than 0.
- 3. Give csc the sign of sin, and sec the sign of cos. A reciprocal of a nonzero number keeps that number's sign.
- 4. Give tan and cot a positive sign when the x and y signs match, and a negative sign when they differ.
- 5. If the question gives signs and asks for location, list every quadrant and axis allowed by each condition, then keep their shared locations. For example, cosine positive allows I, IV and the positive x-axis; sine positive allows I, II and the positive y-axis. Do not drop an axis candidate until another condition excludes it.
- 6. If a condition says a value is 0 or undefined, check the four axis points before using the quadrant rows. For example, cos t = 0 means x = 0, so the point lies on the y-axis.
- 7. Memory device: All Students Take Calculus. In quadrant order, All, Sine, Tangent and Cosine are positive, each named function together with its reciprocal. This cue applies inside quadrants.
- Read a reference-table entry in the column under its input or category in the matching picture.
- 1. Read the unit. A degree sign means degrees; without a degree sign the input is in radians.
- 2. If the angle is negative, add 360° or 2π until it is at least 0. If it is at least one full turn, subtract full turns until it is less than 360° or 2π. The final window includes 0 and excludes a full turn.
- 3. For degrees, compare with the exact boundaries 0°, 90°, 180°, 270°, 360°.
- 4. For a multiple of π, compare its coefficient with 0, , 1, , 2. This works because π is positive.
- 5. For a plain radian number, use ≈ 1.5708, π ≈ 3.1416, ≈ 4.7124, 2π ≈ 6.2832. Each decimal is rounded to four places. Keep enough precision to decide which side of the exact boundary the number is on.
- 6. Use the exact interval in the column under the chosen quadrant. If the angle equals a boundary, name the axis direction instead: 0 gives positive x, positive y, π negative x, negative y.
- Read a reference-table entry in the column under its input or category in the matching picture.
- 1. Read what to compare: a larger angle is the larger input, but its sine or cosine may be a larger or smaller output.
- 2. Locate both angles. For a comparison by increasing or decreasing, both must lie in one interval where the requested function keeps the same direction of change.
- 3. Use the quadrant motion table, or combine neighboring quarters with the same direction: cosine decreases through I and II and increases through III and IV.
- 4. Increasing means the larger input gives the larger output. Decreasing means the larger input gives the smaller output.
- 5. If both angles are shifted by the same complete turn, their order is preserved. If you reduce them by different numbers of turns, compare the reduced inputs again before using the table. Their original order need not be the reduced order.
- 6. If the two values have opposite signs, the positive value is larger. If neither one interval nor signs decide the comparison, these rules alone are insufficient; use an additional taught exact-value fact.
- 7. Check the moving point: higher means larger sine; farther right means larger cosine. For negative outputs, a value closer to 0 is larger, such as − > −.
- Read a reference-table entry in the column under its input or category in the matching picture.
- 1. Read the negative sign inside the function as an instruction to reverse the input.
- 2. Identify the function. Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd.
- 3. For an even function, replace f(−t) by f(t). For an odd function, replace f(−t) by −f(t). Write the outside sign immediately.
- 4. Evaluate the positive input using a known value. If it still contains extra periods, use the period already taught to reduce it.
- 5. Keep the outside sign through every later step. Check that the resulting sign agrees with the terminal point.
- Read a reference-table entry in the column under its input or category in the matching picture.
- 1. Read whether the request is a location or a function value or sign. For a location, keep the original signed angle, reduce only by full turns of 2π or 360°, then use its terminal point and stop. Changing the sign of the angle or using a tangent half-period may change its location.
- 2. If the angle is negative, use even or odd symmetry and record any outside negative sign.
- 3. Remove whole periods: 2π or 360° for sin, cos, sec and csc; π or 180° for tan and cot.
- 4. Locate the reduced angle. If it is on an axis, use its coordinates and check denominators. Otherwise use the quadrant to determine the reduced expression's sign.
- 5. For a sign question, combine the reduced expression's sign with the outside sign and stop. For an exact-value question, use a known value or an identity. If neither applies, retain the exact expression instead of inventing a value.
- Read a reference-table entry in the column under its input or category in the matching picture.
- 1. Translate the request: one trig value and a quadrant are given; find each of the five other outputs.
- 2. Check the sign and range against the stated quadrant. Inside a quadrant both coordinates are nonzero: require 0 < |sin θ| < 1 and 0 < |cos θ| < 1, or |sec θ| > 1 and |csc θ| > 1. A given tangent or cotangent must be nonzero with the quadrant's sign. Reject an endpoint or zero that forces an axis.
- 3. If secant or cosecant is given, take its reciprocal to get cosine or sine. If tangent or cotangent is given, use its quotient formula to express sine in terms of cosine or cosine in terms of sine.
- 4. Substitute into θ + θ = 1. Solve for the missing square; this finds the coordinate's size without yet choosing its sign.
- 5. Take the nonnegative square root, then choose the coordinate's sign from the quadrant.
- 6. Use quotients and reciprocals for the other functions. Show division by fractions and any rationalizing.
- 7. Check the sum of the sine and cosine squares, every quadrant sign and the original given value.
- Read a reference-table entry in the column under its input or category in the matching picture.
Traps
Mixing up the two questions. The domain is about the input t, and every t is allowed for sine and cosine. The range is about the output, which must be between −1 and 1. The input t = 5 is fine for sine; the output 5 is impossible.
Calling a 0 on top 'undefined'. = 0 is an ordinary value. Only a 0 on the bottom breaks a function, so tan π = 0 is defined while cot π is undefined.
Writing the range of sec t or csc t as [−1, 1]. That is the range of their partners cos t and sin t. Flipping pushes every value outside: (−∞, −1] ∪ [1, ∞).
Removing a single π from a sine, cosine, secant or cosecant angle. Half a lap flips their sign: sin(t + π) = −sin t, so sin 210° is −, not sin 30° = . Only tangent and cotangent may drop π at a time; the others must drop 2π (360°).
A reciprocal keeps its partner's sign. csc follows sin, sec follows cos, and cot follows tan wherever both exist. Remember that the All Students Take Calculus cue excludes axis points.
A plain number such as t = 4 means 4 radians, about 229°, rather than 4°. Also, 1.57 is a rounded landmark, rather than exactly . A number close to a rounded landmark needs more digits before you choose a quadrant.
Decreasing does not mean negative. In II, sine decreases while staying positive. In IV, sine increases while staying negative. Also, reducing two angles by different numbers of turns can change their order, so compare their reduced inputs before using a direction rule.
Moving a minus sign outside cosine or secant changes the answer incorrectly. Even functions preserve the positive-input output's sign. Odd functions reverse that output's sign; if the positive-input output is already negative, the result is positive.
Losing the outside sign while reducing the input changes the expression. Carry it through every equality. Also check axis points before attempting a reciprocal: an undefined value cannot be fixed by moving a negative sign.
Taking the sign from the square root. = is positive, but in Quadrant IV sine is negative, so sin θ = −. The quadrant decides the sign, never the square root.
Graphs of sine and cosine
- 1. Turn a circle's height into the sine graph
- 2. A changes height: amplitude, stretch, compression, reflection
- 3. Omega changes width: derive the period
- 4. Read A and omega before doing arithmetic
- 5. Cofunctions: change the partner and subtract the angle
- 6. Cosine starts at the top and shares the same wave shape
- 7. Sketch a complete cycle with five key points
- 8. Read a wave and write its equation
The unit at a glance
Rules
For y = sin x: Domain is all real numbers; Range is [−1, 1]; the graph is Continuous.
Period (T) = 2π; sin(x + 2kπ) = sin x for any Integer k; sin(−x) = −sin x.
For y = A sin x: Amplitude = |A| = ; Midline is y = 0; Range is [−|A|, |A|].
|A| > 1 stretches vertically; 0 < |A| < 1 compresses vertically; A < 0 reflects across the x-axis. For A ≠ 0, T = 2π.
For y = A sin(ωx), with A ≠ 0 and ω ≠ 0: T = and |ω| = .
|ω| > 1 compresses horizontally; 0 < |ω| < 1 stretches horizontally; ω < 0 reverses the input direction. A = 0 or ω = 0 gives a constant graph without a smallest positive period.
For y = A sin(ωx), with A ≠ 0 and ω ≠ 0, amplitude = |A| and T = . A is outside sine; ω multiplies x inside sine.
Wherever both sides are defined: sin x = cos( − x), cos x = sin( − x), tan x = cot( − x), cot x = tan( − x), sec x = csc( − x), and csc x = sec( − x). For degree angles, replace with 90° throughout.
y = cos x has domain (−∞, ∞), range [−1, 1], period 2π, and cos(−x) = cos x. It begins at (0, 1). Also cos x = sin(x + ), a shift of sine left. For A cos(ωx), amplitude = |A| and T = when A ≠ 0 and ω ≠ 0.
For A ≠ 0 and ω > 0, y = A sin(ωx) or y = A cos(ωx) has T = . Use the input columns 0, , , , T in the key-point picture. Multiply the parent heights by A, connect smoothly, and repeat every T.
For nonconstant y = A sin(ωx) or y = A cos(ωx), centered at y = 0 with ω > 0, amplitude a = and ω = . At x = 0: middle up chooses a sin; middle down chooses −a sin; top chooses a cos; bottom chooses −a cos.
Recipes
- 1. Treat x as the Input, also called the Independent variable, and y = sin x as the Output, also called the Dependent variable. The output depends on which input you choose.
- 2. Use radians on the horizontal axis. On a Unit circle, a Radian input has the same numerical value as signed rim distance along the circle. Ordinary traveled Arc length equals the input's magnitude. The Central angle is the turn at the center.
- 3. Read each column of the value table: its top entry is x and its bottom entry is sin x. Point plotting means putting the Ordered pair (x, sin x) on the Graph in the xy-plane.
- 4. Locate the five Key points (0, 0), (, 1), (π, 0), (, −1), and (2π, 0). They record the start, top, middle, bottom, and return. A Key point is an anchor at a quarter-cycle position; five such anchors divide a cycle into four gaps. A quarter turn is one fourth of a full turn. A peak is a top height and a valley, also called a trough, is a bottom height.
- 5. Draw a smooth curve through the points. An Intercept is a crossing or touching of an axis; here x = 0, π, and 2π give output 0.
- 6. Continue the same pattern left and right. One Cycle has horizontal length 2π, because a full circle lap repeats the entire height record.
- 1. Find A, the Constant multiplying sine on the outside. In −3 sin x, A = −3; in sin x, the invisible coefficient is A = 1.
- 2. Compute |A| by keeping its size and removing its minus sign. This is the Amplitude, never a negative distance.
- 3. Compare |A| with 1 to decide whether there is a Vertical stretch, a Vertical compression, or unchanged height. A negative sign adds a Reflection.
- 4. Multiply each original sine output by A. The input coordinates stay fixed because this is an outside multiplication.
- 5. Write the Midline y = 0 and Range [−|A|, |A|]. Maximum and Minimum mean highest and lowest outputs; a Local maximum or Local minimum is a peak or valley compared with nearby points.
- 6. If you are given extreme heights, subtract minimum from maximum and divide by 2. The source waves are centered at zero; do not mistake the entire top-to-bottom distance for the amplitude.
- 7. If A = 0, every output is 0. Draw the constant graph y = 0 and do not assign a smallest positive period.
- 1. Read ω, the entire coefficient multiplying x inside sine. In sin(2x), ω = 2; in sin(x), ω = ; in sin(5πx), ω = 5π.
- 2. Check A ≠ 0 and ω ≠ 0 before calling the graph a nonconstant wave.
- 3. Take |ω| to remove direction. Period (T) measures a positive horizontal length.
- 4. Compute T = 2π ÷ |ω|. Divide by a fraction by multiplying by its reciprocal. Cancel π only when it is a common factor of the full numerator and denominator.
- 5. Compare |ω| with 1. Larger than 1 means Horizontal compression; between 0 and 1 means Horizontal stretch; equal to 1 keeps the original width.
- 6. Check by multiplying the proposed period by |ω|. The product must be 2π, exactly one inside lap.
- 7. If a graph gives T and you need ω, use |ω| = . Choosing ω > 0 gives the convenient representative ω = ; period alone does not determine its sign.
- 1. Write any missing coefficient: −sin(...) means −1 × sin(...), and sin x means 1 × sin(1x).
- 2. Copy A from outside sine and the entire ω from the factor multiplying x inside. Keep their signs here.
- 3. Use |A| for amplitude and |ω| for the period calculation.
- 4. Calculate T = 2π ÷ |ω|. Dividing by a fraction multiplies by its reciprocal, meaning its upside down version.
- 5. Put T back into |ω|T = 2π to check the complete turn. The range is [−|A|, |A|].
- 1. Choose the partner: sine with cosine, tangent with cotangent, or secant with cosecant.
- 2. Use 90° for degree angles and for radian angles.
- 3. Subtract the old angle from that quarter turn. For radian fractions, make the denominators match first.
- 4. Write the partner at the resulting angle. Keep any negative result.
- 5. Add the old and new arguments to check their quarter turn sum. Check that both functions are defined.
- 1. Start the parent cosine graph at (0, 1), then read the unit circle's horizontal coordinate at each quarter turn.
- 2. For A cos(ωx), read the outside A and inside ω as for sine. Use |A| for amplitude and 2π ÷ |ω| for period.
- 3. Keep midline y = 0 and range [−|A|, |A|]. A negative A changes the start from the top to the bottom.
- 4. Compare opposite inputs using cos(−u) = cos u. Equal outputs give symmetry about the y-axis. An Even function has equal outputs at opposite inputs. Symmetry about the y-axis means (x, y) matches (−x, y), so the left and right halves mirror each other.
- 5. To compare with sine, use cos x = sin(x + ). Each old sine feature occurs earlier, so the graph moves left.
- 1. Check A and ω for zero. If the graph is nonconstant and ω is negative, rewrite using sin(−u) = −sin u or cos(−u) = cos u to obtain positive ω. Then copy the resulting signed A and positive ω. Find amplitude |A| and T = .
- 2. Divide T by 4 to find the quarter period. Put its successive multiples in an input/output table.
- 3. Use the sine or cosine parent heights and multiply each by A. The table is the point-plotting plan.
- 4. Draw each column as an ordered pair. Join the points smoothly, with rounded tops and bottoms.
- 5. If the requested interval spans several cycles, copy the points by adding or subtracting T from each input. Do not change their heights.
- 1. Confirm that the midline is y = 0 and that the problem uses an unshifted sine or cosine wave. This is the family the four-start method identifies.
- 2. Find the amplitude from half the vertical span. It is positive for a changing wave.
- 3. At x = 0, choose sine or cosine and the sign of A from the starting height and direction. Set |A| equal to the amplitude.
- 4. Measure the horizontal distance from one point to the next matching point with the same direction. That distance is T.
- 5. Solve ωT = 2π by dividing both sides by T. Choose ω = > 0 and write the equation.
- 6. Substitute the five quarter-period inputs into the equation. Compare all five outputs with the graph, and verify ωT = 2π.
Traps
Do not turn the exact radian input into a degree input of °. It means a quarter turn, or 90°. The decimal 1.57 is only a rounded label for that exact input.
A = −3 is a signed coefficient, but Amplitude = |−3| = 3 is a distance. The minus sign describes reflection, not a negative amplitude. The unshifted Midline is y = 0, the x-axis; x = 0 is a vertical line.
The inside multiplier is not the period. For sin(2x), ω = 2 but T = π. Divide 2π by |ω|. A negative ω also gives a positive period because width is a distance, not a direction.
Using the outside number as period, or treating π as decoration inside sine. Copy A and the entire ω before applying their separate formulas.
Changing the function name but keeping the old angle, or subtracting radians from 90°. Change name and argument, using one angle unit throughout.
Starting cosine at the origin, or confusing cos(−x) with −cos x. Cosine starts at (0, 1). Changing its input sign leaves output unchanged, while an outside minus reflects its heights.
Drawing straight segments between the key points makes a zigzag. These points locate a smooth sinusoidal function, so round the turns and cross the middle smoothly.
The four-start method assumes an unshifted wave centered at y = 0 and a positive ω. A wave with another midline or an arbitrary horizontal shift needs the later transformation method.
Graphs of the other four functions
- Four formulas and the inputs they must skip
- Range: the output heights each graph can reach
- Even and odd: how the picture balances
- Period: copy the right-sized piece
- Tangent and the meaning of a vertical asymptote
- Cotangent: the branch that falls
- Cosecant: build a reciprocal graph from sine
- Secant: build a reciprocal graph from cosine
- Read, sketch and remember all four graphs
The unit at a glance
Rules
tan x = ; cot x = ; sec x = ; csc x = .
For tan and sec, require x ≠ + nπ; for cot and csc, require x ≠ nπ, with n any integer.
tan x and cot x have range (−∞, ∞). sec x and csc x have range (−∞, −1] ∪ [1, ∞), meaning y ≤ −1 or y ≥ 1.
sec(−x) = sec x is even, with y-axis symmetry. tan(−x) = −tan x, cot(−x) = −cot x and csc(−x) = −csc x are odd, with origin symmetry. In each identity, x and −x must both be allowed inputs.
tan(x + π) = tan x and cot(x + π) = cot x. sec(x + 2π) = sec x and csc(x + 2π) = csc x. Their fundamental periods are π, π, 2π and 2π respectively.
tan x = , with x ≠ + nπ for every integer n. The vertical asymptotes are x = + nπ.
Each branch is continuous and increasing; the central branch is on (−, ) and the pattern repeats every π.
cot x = , with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ and its period is π.
On (0, π), the continuous decreasing branch passes through (, 1), (, 0), and (, −1).
csc x = , with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and csc(−x) = −csc x.
sec x = , with x ≠ + nπ for every integer n. Its vertical asymptotes are x = + nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and sec(−x) = sec x.
for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote. Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.
Recipes
- 1. Write the formula as a fraction because the denominator identifies the restriction.
- 2. Set the denominator equal to 0 to find the inputs that would make the division impossible.
- 3. Read those angles from the unit circle and substitute them back into the denominator to verify it is 0.
- 4. Exclude those inputs. Keep a zero numerator when the denominator is nonzero.
- 1. Identify whether you have a quotient function or a reciprocal-of-sine-or-cosine function.
- 2. For tangent or cotangent, accept any real output because every height occurs.
- 3. For secant or cosecant, keep outputs at or below −1 and at or above 1.
- 4. Include −1 and 1; exclude only the open middle band −1 < y < 1.
- 1. Check that the input is allowed before using symmetry.
- 2. If the function is secant, negate the input and keep the output height.
- 3. If it is tangent, cotangent or cosecant, negate both input and output.
- 4. On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.
- 1. Select π for tangent or cotangent and 2π for secant or cosecant.
- 2. Sketch a complete piece of that width, keeping excluded endpoints out of the graph.
- 3. Copy its points and breaks left and right by integer multiples of the period.
- 4. For an exact value, add or subtract complete periods to reach a known allowed input.
- 1. Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.
- 2. For the central branch, use x = − and x = . Check cos(−) = 0 and cos() = 0 before drawing the dashed vertical lines.
- 3. Plot (−, −1), (0, 0), and (, 1), using the exact unit-circle values in the worked example's three-column table.
- 4. Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.
- 5. Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.
- 1. Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.
- 2. For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.
- 3. Read the three table columns to plot (, 1), (, 0), and (, −1).
- 4. Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.
- 5. Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.
- 1. Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.
- 2. Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.
- 3. Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.
- 4. Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.
- 5. Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.
- 1. Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.
- 2. Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.
- 3. Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.
- 4. Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.
- 5. Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.
- 1. Write the quotient or reciprocal formula.
- 2. Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.
- 3. Plot the known key points within each allowed branch.
- 4. Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.
- 5. Repeat by the fundamental period and check the even or odd symmetry and the range.
Traps
A zero on the top is not a break. Check the bottom first: = 0, while is undefined.
Excluding ±1 along with the middle band. The gap is open: −1 < y < 1. At the edges, reciprocal values are still ±1.
Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.
Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.
Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.
Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at that gives the valid output 0.
taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.
secant uses cosine zeros, which lie at odd multiples of . Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.
Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.
Sinusoidal functions
- A sinusoidal function is a repeating wave
- Amplitude measures height, not direction
- Period measures the width of a repeat
- Phase shift: why minus inside moves right
- One cycle: solve the inside-input inequality
- Midline, maximum, minimum and range
- Read all four features, including unusual signs
- Build an equation from a graph
- Build and check a daylight model
The unit at a glance
Rules
a sine wave is written y = A sin(ωx − φ) + B, and a cosine wave is written y = A cos(ωx − φ) + B. For a nonconstant wave, A ≠ 0; use ω > 0 after rewriting signs. The inside input is in radians. Read ω as omega and φ as phi. A coefficient is a multiplier; ω is the coefficient of x. A parameter is a fixed setting such as A, ω, φ or B. T labels the period and h labels the signed horizontal shift. The subscript max means highest output and min means lowest output.
amplitude = |A| = . It is the distance from the midline to an extreme, not the full height. Negative A reflects the wave vertically.
for ω > 0, T = and ω = . Use adjacent matching stages of the wave to read T from a graph. T is a positive repeat distance, and h will name a signed horizontal shift.
h = , with ω > 0. Factor ωx − φ = ω(x − h). h > 0 moves right; h < 0 moves left; h = 0 gives no horizontal shift. We name the signed horizontal slide h.
0 ≤ ωx − φ ≤ 2π gives h ≤ x ≤ h + T, where h = and T = , provided ω > 0.
midline y = B, with B = . Minimum = B − |A|; maximum = B + |A|. Range: [B − |A|, B + |A|].
rewrite negative inside speed first: cos(−u) = cos u; sin(−u) = −sin u. Then amplitude |A|, period , phase shift , and midline y = B.
A = > 0, B = , ω = , φ = ωh. Choose h at an upward middle crossing for sine or a peak for cosine.
for a fitted positive-A sine wave, A = , B = , ω = , φ = ωh. Choose h near a rising middle crossing and compare predictions with observations.
Recipes
- Name the wave as sine or cosine.
- Read the number multiplying the whole wave, A.
- Read the coefficient of x inside, ω, and match the inside to ωx − φ.
- Read the number added after the wave, B.
- Use the next lessons to translate these parameters into distances.
- Read A, the entire outside multiplier, including its sign.
- Use |A| for the amplitude.
- If heights are given instead, subtract minimum from maximum and divide by 2.
- Keep A's sign when drawing which part of the cycle rises or falls.
- Read ω, the coefficient of x inside.
- Divide 2π by that positive coefficient.
- If T is given instead, divide 2π by T to find ω.
- Plug back into ωT = 2π.
- Match the entire inside input to ωx − φ, including the sign of φ.
- Set the inside input equal to 0 to locate the chosen cycle start.
- Undo the subtraction, then divide by the positive coefficient of x.
- Plug the answer back into the inside and confirm 0.
- State the distance and direction separately.
- Write 0 ≤ the entire inside input ≤ 2π.
- Undo addition or subtraction in all three parts.
- Undo multiplication by dividing all three parts by positive ω.
- Plug both endpoints back into the inside; get 0 and 2π.
- Subtract start from end to get the period.
- Find the center B from the outside addition or the average of the extremes.
- Find the positive amplitude |A|.
- Subtract the amplitude from B for the minimum.
- Add the amplitude to B for the maximum.
- Write the midline as an equation and the range as an included interval.
- If the x-coefficient inside is negative, factor out −1 from the whole inside.
- Use the cosine even rule or sine odd rule.
- Match A, ω, φ and B, keeping signed quantities.
- Compute each feature on its own line.
- Plug the shift into the original and rewritten inside and check the range.
- Read the maximum and minimum, then find positive A and B.
- Read T between adjacent matching stages.
- Compute ω = 2π ÷ T.
- Choose sine at an upward middle crossing or cosine at a peak; read h.
- Compute φ = ωh and substitute h back into the inside.
- Check points one quarter period apart.
- Define the time input and the output units.
- Draw the table and plot the observed points.
- Read the observed maximum, minimum and repeating interval.
- Choose a suitable sine crossing or cosine peak.
- Assemble the model and check several months.
- Repeat the observation pattern by T for the requested longer plot.
Traps
Do not call every periodic function sinusoidal. Repeating stair steps repeat too, but they are not sine or cosine waves.
Do not report maximum-minus-minimum as the amplitude. It contains two amplitude distances.
ω is not the period. It is the multiplier that determines the period.
Do not read the phase shift as φ alone. First translate from inside units to x-units by dividing by ω.
Matching endpoint heights alone does not prove a full cycle. A sine wave also has equal heights half a cycle apart, but it then moves in the opposite direction.
The Domain is the input set; the Range is the output set. A transformed sine or cosine still accepts every real x, while its output heights are bounded.
The chosen cycle start is an upward crossing for positive-A sine and a peak for positive-A cosine. Negative A reverses those starting features.
A graph alone does not force a unique phase shift. State which sine or cosine start you chose and check that the equation reproduces the pictured stages.
Do not confuse an observed height with a model prediction. The instructor's formula approximates the table and does not exactly place every observed extreme in its recorded month.
Inverse trigonometric functions
- Why a trig function needs its domain cut before it can have an inverse
- The inverse sine
- The inverse cosine
- The inverse tangent
- Exact values by the sign and the quadrant
- A function and its inverse undo each other, with conditions
- Mixing the functions with a right triangle
- Inverse values on a calculator, and why one answer is not all the answers
The unit at a glance
Rules
Horizontal line test: a function has an inverse function exactly when no horizontal line crosses its graph more than once. A function that passes is called a one-to-one function. Every trig function repeats, so each one fails the test and must be cut first. Sine is cut to the restricted domain [−, ], where sin θ takes every value in [−1, 1] exactly once.
y = arcsin x, also written y = x, means sin y = x and − ≤ y ≤ .
Domain: [−1, 1]. Range: [−, ], which is −90° to 90°.
The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0, π]. So y = arccos x, also written y = x, means cos y = x and 0 ≤ y ≤ π.
Domain of arccos: [−1, 1]. Range of arccos: [0, π].
y = arctan x, also written y = tan⁻¹ x, means tan y = x and − < y < .
Domain: all real numbers, (−∞, ∞). Range: (−, ), with both ends left out. Horizontal asymptotes: y = − and y = .
Let r be the reference angle: the angle from 0 to whose sine, cosine or tangent (the one being undone) equals the input without its minus sign. A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π − r for arccos. In symbols: arcsin(−x) = −arcsin x, arctan(−x) = −arctan x, arccos(−x) = π − arccos x. The result is the principal value: the one angle inside the range.
sin(arcsin x) = x for x in [−1, 1] (undefined for other x); arcsin(sin x) = x for x in [−, ], and for any other x it is the angle in [−, ] with the same sine.
cos(arccos x) = x for x in [−1, 1] (undefined for other x); arccos(cos x) = x for x in [0, π], and for any other x it is the angle in [0, π] with the same cosine.
For an expression such as cos(arcsin a): let θ = arcsin a, the principal value; draw θ in the quadrant that its range and the sign of a allow; label two sides from a, with a minus sign on a leg that points left or down; find the third side from ad + op = hy; then read sin θ = , cos θ = or tan θ = . When θ lands on an axis (a = 0, or a = 1 or −1 for arcsin and arccos) there is no triangle: read the value from the point on the unit circle, for example cos(arcsin 1) = cos = 0. For a letter: cos(arcsin x) = , for −1 ≤ x ≤ 1.
The sin⁻¹, cos⁻¹ and tan⁻¹ keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin⁻¹ k in [−, ], cos⁻¹ k in [0, π], tan⁻¹ k in (−, ), named in the units the mode is set to.
On [0, 2π), sin t = k and cos t = k have two solutions when −1 < k < 1, one when k = 1 or k = −1, and none when k < −1 or k > 1; tan t = k has two for every k. With the reference angle α = the key pressed on |k|, the solutions are the angles among α, π − α, π + α and 2π − α (in degrees α, 180° − α, 180° + α, 360° − α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0, 2π) that solves the equation (sin t = 0 at 0 and π, cos t = 0 at and , tan t = 0 at 0 and π).
Recipes
- Say in plain words what is asked: can the function be run backward, that is, does each output come from only one input?
- Picture the graph with inputs across and outputs up. For sine it is the wave that rises to 1 at , falls to −1 at and repeats every 2π.
- Slide a horizontal line from the bottom of the graph to the top and watch for any height where it touches two or more points.
- If it ever does, write the proof as a pair: two inputs with one shared output, such as sin() = sin() = . The function is not a one-to-one function, so on that domain it has no inverse function.
- To repair a smooth wave like sine, keep a stretch of inputs with no turn inside it that still reaches every output. For sine that stretch is the restricted domain [−, ].
- Check the stretch: evaluate sine at its ends and its middle, sin(−) = −1, sin 0 = 0 and sin() = 1, then slide the horizontal line again; each height from −1 to 1 should touch once.
- Turn the question into a sine question: y = arcsin x asks for the angle y from − to with sin y = x. The input x is a height; the answer y is an angle.
- Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.
- Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.
- Check the answer: it lies between − and , and its sine gives back x.
- Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
- Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
- Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to . An input of 0 puts it straight up, at . A negative input puts it on the top-left quarter, so the answer is past , up to π.
- In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
- Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.
- Read arctan(a) as a question: which angle, strictly between − and , has tangent a? The input a is a tangent value, a steepness. The answer is an angle.
- If a has a square root in its bottom, rewrite it to match the table: = .
- Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.
- Find a in the tan θ column of the table and read the angle at the start of its row.
- Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between − and .
- Name the reference angle: cover any minus sign and find the special angle from 0 to whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
- Read the sign of the input: zero, positive or negative.
- Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−) for arcsin, the left end (π) for arccos.
- Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
- Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.
- Say what the problem asks, reading from the inside out: arcsin(sin θ) means 'take the sine of θ, then find the angle in [−, ] with that sine'.
- Name the outside function; it decides the test. A trig function outside needs the number inside to be one its inverse accepts: from −1 to 1 for sin and cos, any number for tan. An inverse outside needs the angle inside to lie in its range: [−, ] for arcsin, [0, π] for arccos, (−, ) for arctan.
- If the test passes, the two undo each other, and the answer is the number or angle you started with.
- If a trig function is outside and the test fails, the inverse does not exist there: write undefined.
- If an inverse is outside and the test fails, do not cancel. First make sure the inside value exists: tan() does not, so arctan(tan()) is undefined. Then find the inside value exactly from the unit circle, then find the angle in the range with that value by the four-step method of the last lesson.
- Check: with an inverse outside, the answer lies in that inverse's range, and its sine, cosine or tangent equals the inside value; with sin, cos or tan outside, the answer is the number inside the inverse, which that inverse had to accept.
- Say it in words and name the inside angle: cos(arcsin()) is the cosine of θ, where θ = arcsin(), so sin θ = .
- Pick θ's quadrant from the table: a positive input gives Quadrant I; a negative input gives Quadrant IV for the inverse sine and the inverse tangent, and Quadrant II for the inverse cosine. An input of 0, 1 or −1 to the inverse sine or inverse cosine, or 0 to the inverse tangent, puts the angle on an axis: read those from the unit circle.
- Draw θ from the positive x-axis into that quadrant, and drop a line from the end of its slanted side to the x-axis. The right triangle this makes has the reference angle at the origin; giving its legs signs turns its ratios into the values for θ itself.
- Label the two sides the input gives: a sine gives , a cosine gives , a tangent gives . A leg that points left or down is negative; the hypotenuse is always positive.
- Find the third side with ad + op = hy: take the positive square root, then give a leg the sign of the direction it points.
- Read the outside function as a ratio of the signed sides with SOH-CAH-TOA, then check the sign with All Silver Tea Cups.
- Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
- Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is ; degree mode shows 90.
- Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
- Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
- Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
- Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.
Traps
Cutting sine to [0, π], the top half of the circle, because it looks like a natural half. On [0, π] sine climbs and then falls, so sin() = sin() = still repeats, and it never reaches a negative height. Sine's piece is the right half of the circle, from the bottom to the top: [−, ]. Say it to yourself: sine climbs the right side.
Answering with an angle outside the range. For arcsin(−) it is tempting to write or : both have sine −, but neither lies between − and . The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −. Before you write any arcsin answer, check that it lies in that stretch.
Answering a negative input with a negative angle, the way the inverse sine does: arccos(−) = − is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past , up to π: here . Catch the slip by taking the cosine of what you wrote: cos(−) = +, the wrong sign.
Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of , of and of −, and it is tempting to write the first one that comes to mind. Only the principal value, −, lies strictly between − and , so arctan(−1) = −. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.
The most common slip here is the right point with the wrong name. For arcsin(−) many people write , because the unit circle they learned runs from 0 to 2π. The point is right, but is not between − and , so it is not the principal value. Name the same point by turning clockwise: −. And , in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.
Canceling on sight. arcsin and sine look as if they cross out, so it is tempting to write arcsin(sin()) = . Before you cancel, test the angle against the range of the outside inverse. is past = , so it fails; work from the inside instead: sin() = , then arcsin() = .
Drawing every triangle in Quadrant I. A negative input moves the inside angle: to Quadrant IV for the inverse sine and the inverse tangent, to Quadrant II for the inverse cosine, and one leg turns negative. An input of −1 to the inverse sine or cosine puts the angle on an axis instead, where no triangle forms; read that answer from the unit circle. Skip this and you get the right size with the wrong sign: instead of − for tan(arccos(−)). Decide the quadrant before you draw anything.
The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.
Trigonometric equations
- What it means to solve a trigonometric equation
- Solving sin t = c, cos t = c and tan t = c on one turn
- Writing every solution with the period
- Equations with a multiple of the angle
- Equations that factor like a quadratic
- Rewriting with an identity first
- Equations a calculator finishes
- Checking for extra solutions after squaring
The unit at a glance
Rules
A solution of a trigonometric equation is an angle t that makes it true. For sin t = c with −1 < c < 1 and c ≠ 0, one turn, 0 ≤ t < 2π, holds exactly two solutions, in the two quadrants where sine has the sign of c; and if t is a solution, so is t plus or minus any number of full turns 2π.
For 0 ≤ t < 2π, when c is not an axis value and the function can reach it: the size of c gives the reference angle α, the table angle whose sine, cosine or tangent has that size; the sign of c gives the two quadrants where that function has that sign; the answers are α in I, π − α in II, π + α in III and 2π − α in IV. The axis values, 0, 1 and −1 for sine and cosine and 0 for tangent, put the answers on the axes instead, and sine and cosine have no answer when c is above 1 or below −1.
If t = a solves sin t = c or cos t = c, so does t = a + 2kπ for every integer k; if t = a solves tan t = c, so does t = a + kπ. The general solution: each solution on one turn + 2kπ for sine and cosine, the one solution in [0, π) + kπ for tangent, where k is any integer.
To solve a trigonometric equation such as sin(nt) = c, cos(nt) = c or tan(nt) = c for 0 ≤ t < 2π: the inside angle u = nt runs over 0 ≤ u < 2nπ, which is n full turns. Find every u on that stretch, then divide each one by n. For a positive whole number n, that gives n times as many solutions as the plain equation, such as sin t = c, has on one turn.
An equation a· t + b·sin t + c = 0, with a ≠ 0, is a quadratic in sin t: writing u = sin t gives a + bu + c = 0. Its solutions are the angles t with sin t = u, for each answer u of the quadratic with −1 ≤ u ≤ 1; an answer outside [−1, 1] gives no angle. Cosine works the same way. For tangent, keep every real answer, since tangent takes every real value.
t + t = 1 at every angle, so t = 1 − t and t = 1 − t: replace the squared function and keep the lonely one.
Where cos t ≠ 0, = tan t, so sin t = cos t becomes tan t = 1, and a·sin t = b·cos t (a ≠ 0) becomes tan t = . First test t = and t = in the original, because a division by cos t would lose them if they were solutions.
To find each solution on one turn [0, 2π) of sin t = c, cos t = c or tan t = c when c is not a special value (and −1 ≤ c ≤ 1 for sine and cosine): in radian mode, the inverse key gives α = arcsin c, arccos c or arctan c. The second solution is π − α for sine, 2π − α for cosine and α + π for tangent. Add 2π to any negative answer. Round only at the end, usually to four decimal places, and write ≈.
If a = b, then = , but = only tells you that a = b or a = −b. So squaring both sides never loses a solution and can add extraneous solutions: keep a candidate only if it makes the original equation true.
Recipes
- Read the question in plain words. 'Solve sin t = c on [0, 2π)' asks for every solution on one turn: every angle from 0 up to, but not including, 2π whose sine is c.
- To test one angle, work out its sine and compare it with c. Equal means the angle is a solution; different means it is not.
- To find every solution on one turn, follow the strategy in this lesson. When −1 < c < 1 and c ≠ 0, do not stop until you have two angles.
- To list solutions on other turns, add 2π to each answer once for every turn forward, or take 2π away once for every turn back.
- Get the function alone on one side: sin t = c, cos t = c or tan t = c.
- Say what the question asks: every angle t with 0 ≤ t < 2π whose sine (or cosine, or tangent) equals c.
- Rule out the special cases. For sine or cosine, c > 1 or c < −1 has no solution. If c is 0, or 1 or −1 for sine and cosine, the answers sit on the axes: read them off the circle, check them and stop.
- Drop the sign of c and find that size in your function's column of the table. The angle at the start of that row is the reference angle α.
- Use the sign of c and All Students Take Calculus to pick the two quadrants where your function has that sign.
- Place α in each of those quadrants: α in I, π − α in II, π + α in III, 2π − α in IV. Rewrite π or 2π with the same bottom as α, then combine the tops.
- Check: put each answer back into the original equation. Name its quadrant and reference angle, read the size from the table, attach that quadrant's sign, and confirm you get c.
- Find every solution on one turn, [0, 2π), with the reference angle and quadrant method from the lesson before.
- Sine or cosine: write each one-turn answer + 2kπ. Each such list is a family: one starting angle plus every whole number of full turns, forward or back.
- Tangent: keep the one answer in [0, π) and write it + kπ. The other one-turn answer is that one + π, so the family already holds it.
- Finish with the words: where k is any integer.
- Check: put k = 1 and k = −1 into each family and confirm that each angle lands on a point with the right value.
- Say what is asked: every solution on one turn, that is, every angle t with 0 ≤ t < 2π that makes the equation true.
- Get the sine, cosine or tangent alone on one side, the way you would solve for x.
- Give the inside angle, the angle the function acts on, a nickname: u = 2t (or u = 3t, and so on).
- Stretch the interval: multiply both ends of 0 ≤ t < 2π by the number in front of t. For 2t that gives 0 ≤ u < 4π, two turns.
- Solve for u on the first turn with the reference angle and the quadrant signs.
- Add 2π to each of those answers, again and again, keeping every result that is below the new end.
- Divide each u by the number in front of t, and simplify the fraction.
- Check: the count should be the number of turns times the count on one turn; then put each t back into the original equation.
- Get 0 on one side: add or subtract on both sides until every term sits on the left and the right side is 0.
- Make sure only one trig function appears (all sin t, or all cos t, or all tan t), with its square in one term.
- Write u for that function, so t becomes and sin t becomes u.
- Factor the quadratic in u: pull out a common factor when there is no plain number term; otherwise split the middle term and group. Multiply back to check. An equation that comes already factored, such as (sin t − 1)(sin t + 2) = 0, skips this step.
- Set each factor equal to 0 and solve for u (the zero-product rule). Plug each u back into the factored form to see the product is 0.
- Put the function back: each value of u becomes a basic equation such as sin t = −.
- Throw out any value of sine or cosine below −1 or above 1: no angle has it. Keep every value of tangent.
- Solve each remaining basic equation on [0, 2π) with the reference angle and the quadrants. For sine or cosine, the values 1 and −1 give one angle each; the other values give two.
- List all the angles in order and put each one back into the original equation.
- Say what the equation asks: every solution on one turn, each t in [0, 2π) that makes the two sides equal.
- Rewrite with an identity until one trigonometric function of t is left; the strategy in this lesson says which identity. Write each swap inside parentheses.
- If you divide by cos t, first put t = and t = into the original equation and keep any that work.
- Get a 0 on one side. If the equation is a quadratic in the function or has a common factor, factor it, treating the function as a single unknown.
- Solve each piece with the reference angle and the quadrants. Throw out any value of sine or cosine outside [−1, 1].
- Put every answer into the original equation, not the rewritten one.
- Get the trig function alone: sin t = c, cos t = c or tan t = c.
- Look at c. A special value is solved exactly, with no calculator. For sine or cosine, a c above 1 or below −1 means no solution: stop.
- Put the calculator in radian mode.
- Press the inverse key (, or ) on c. Call the result α and keep every digit.
- Find the second solution: π − α for sine, 2π − α for cosine, α + π for tangent.
- If an answer is negative, add 2π to it so it lands in [0, 2π).
- Round each answer to four decimal places, write ≈, and put each one back into the equation to check.
- Write the original equation where you will see it at the end. It is the judge.
- Square both sides, the whole of each side at once, keeping the middle term: (a + b = + 2ab + .
- Use t + t = 1, get 0 alone on one side, factor, and set each factor equal to 0.
- Solve each small equation on one turn, [0, 2π). Every answer you get is a candidate.
- Put each candidate into the original equation, not the squared one. Keep it only if the two sides match, sign included.
- Each kept solution on one turn, a, gives the general solution t = a + 2kπ, k any integer.
Traps
Stopping at the first angle you find. When −1 < c < 1 and c ≠ 0, sin t = c has a second solution on one turn, the mirror image across the vertical axis, and every solution comes back after each full turn. Before you finish, ask two questions: did I find both points, and does the question want one turn or more?
Stopping at the table. The table gives only the size of c, so answering t = to sin t = − loses the sign: sin is +. After the table, always pick the two quadrants from the sign of c, write an angle in each, and put both answers back into the equation.
Mixing up the two steps. A family of sine or cosine solutions steps by a full turn, + 2kπ; a family of tangent solutions steps by a half turn, + kπ. For cos t = −, writing + kπ would make (k = 1) a solution, but cos = , the wrong sign. Before you write + kπ, ask: is this tangent? The one other case is sin t = 0 or cos t = 0, whose two families sit half a turn apart and may be joined into one with + kπ.
Solving for 2t only on the usual one turn, 0 ≤ 2t < 2π, and then dividing by 2. That finds only the answers with t less than π and quietly loses the rest: for sin 2t = it gives t = and and misses and . Stretch the interval before you solve, 0 ≤ 2t < 4π, and do all the adding of 2π on 2t before you divide.
Stopping at the values of sin t. Factoring hands you numbers such as sin t = − and sin t = 4, not angles. Each number still needs two more steps: throw it out if it is below −1 or above 1, and otherwise turn it into every angle on one turn with that sine (one angle for 1 and −1, two for the others). Only those angles are the answers.
Dividing both sides by cos t, or by sin t, without testing where it is zero. Division by zero is not allowed, so every solution with cos t = 0, at t = or t = , disappears without any warning; for sin t the angles are t = 0 and t = π. In 2 sin t cos t = cos t, a division loses and . Test those angles in the original equation before dividing, and when the function sits in every term, factor it out instead of dividing.
Stopping at the calculator's answer. The inverse key shows one angle, but sin t = 0.4 has two on one turn. After every key press, ask which other quadrant shares the sign, and find the second angle with π − α, 2π − α or α + π.
Writing the candidates as the answer. After squaring sin t + cos t = 1, the list 0, , π, looks finished, but at t = π the left side is sin π + cos π = 0 + (−1) = −1, not 1, and fails the same way. Put every candidate back into the original equation, never the squared one, before you write the answer.
Trigonometric identities
- What an identity is and how it differs from an equation
- The reciprocal and quotient identities
- The Pythagorean identities from the unit circle
- Even and odd: what a negative angle does
- Simplifying an expression step by step
- Proving an identity by working on one side
- The usual mistakes in a proof
The unit at a glance
Rules
An identity is an equation whose two sides are equal at every angle t where both sides are defined. One angle where both sides are defined and come out different, called a counterexample, proves a claim is not an identity; no number of angles where the sides agree proves that it is.
Reciprocal identities: csc t = , sec t = , cot t = ; flipped back, sin t = , cos t = , tan t = .
Quotient identities: tan t = and cot t = .
Each holds at every angle where both sides are defined. tan t and sec t are undefined (have no value) where cos t = 0: t = + kπ, which is 90° + k · 180°. csc t and cot t are undefined where sin t = 0: t = kπ, which is k · 180°. Here k is any integer: …, −2, −1, 0, 1, 2, …
t + t = 1 for every angle t.
1 + t = t for every angle t with cos t ≠ 0.
1 + t = t for every angle t with sin t ≠ 0.
cos(−t) = cos t and sin(−t) = −sin t for every angle t, and so tan(−t) = −tan t wherever cos t ≠ 0. These are identities. A function f is an even function when f(−t) = f(t), and an odd function when f(−t) = −f(t), for every t where f has a value: cosine is even; sine and tangent are odd.
Simplify by replacing an expression, one step at a time, with a shorter one that has the same value. Each step is a named identity (reciprocal identity, quotient identity, Pythagorean identity, or the even function and odd function rules for a negative angle) or an algebra move that keeps the value (common bottom, multiply across, flip and multiply, factor, cancel a shared factor). The result equals the original at every angle where the original is defined.
To prove an identity in this course, work on one side. Start with the more complicated side and rewrite it one step at a time, using only facts already known: the reciprocal, quotient and Pythagorean identities, the negative-angle facts, and fraction rules that keep the value (a common denominator, factoring, canceling a common factor, multiplying the top and the bottom by the same expression where it is not 0). Stop when the line reads exactly as the other side: the chain of equal lines proves the identity at every angle where every line is defined, and an angle a step leaves out, where both sides of the claim are defined, is checked on its own.
An argument that instead starts from the claim and does the same thing to both of its sides, such as moving a term (a piece joined to the rest by + or −) across the equals sign, shows only where the claim leads. It becomes a proof once every step is shown to run backwards, with any angle where a step cannot run backwards checked on its own. Working on one side needs no such check, which is why it is the method used here.
A proof of an identity leads from facts already known to the claim. The method of this course starts from one side alone and changes only that side, one known identity or algebra move at a time, until it becomes the other side.
An argument that starts from the whole claim and does the same thing to both sides shows only where the claim leads. It becomes a proof once every step is shown to walk back, with any angle where a step cannot walk back checked on its own. Squaring both sides walks back only where the two sides are known to have the same sign. Multiplying both sides by an expression does not walk back where that expression is 0, and dividing both sides by it is not possible there.
Recipes
- Say in plain words what the claim promises: the left side equals the right side at every angle where both are defined.
- Find the angles to leave out: any angle where a side has no value. In this unit that happens where the bottom of a fraction is 0, or where a square root would hold a negative number. Those angles count neither for nor against the claim. Every other angle is allowed.
- Pick an allowed test angle whose sine and cosine you know exactly, preferably 30° or 60°, where neither is 0 and the two are different.
- Work out the left side and the right side separately, with exact values.
- If the two numbers differ, stop: the claim is not an identity, and your angle is a counterexample, an example that breaks the claim.
- If they agree, you have no verdict yet. Test another angle, or find a reason that works for every allowed angle at once; only such a reason shows the claim is an identity.
- Say what the question asks: which angle goes in, and which function's value must come out.
- Pick the identity: a flip of sine, cosine or tangent is a reciprocal identity; sine and cosine divided one by the other is a quotient identity.
- Write the function as a fraction in sin t and cos t: csc t = , sec t = , tan t = , cot t = .
- Look at the bottom. If it is 0 at your angle, the function is undefined there, and you are done.
- Otherwise put in the numbers from the point (cos t, sin t) and divide: multiply by the flip, cancel, and rationalize any square root left in the bottom.
- Check: multiply the answer by its partner at the same angle (sin with csc, cos with sec, tan with cot). The product must be 1. An answer of 0 is the one exception: its partner is undefined there, so check instead that the top of your fraction is 0 and the bottom is not.
- Write the parent identity: t + t = 1.
- Choose what to divide by: t to reach tangent and secant, t to reach cotangent and cosecant.
- Set cos t (or sin t) equal to 0 to find the angles to throw out: cos t = 0 at 90° and 270°, sin t = 0 at 0° and 180°, and at every angle ending at those same points.
- Divide every term on both sides by the chosen amount, the 1 included.
- Split the left side into one fraction per term.
- Rename each fraction: a term over itself is 1, and each of the others is a quotient identity or a reciprocal identity, squared.
- Test the result at one angle where it should hold, such as 30° or 60°.
- Look at the angle: a minus sign in front of it means the same size of turn in the other direction.
- Name the function in front of the angle.
- Cosine or secant: drop the minus, because they are even. cos(−t) becomes cos t.
- Sine, cosecant, tangent or cotangent: move the minus out in front of the function, because they are odd. sin(−t) becomes −sin t.
- If the function is squared or cubed, rewrite inside the parentheses first and apply the power after.
- Finish the work at the positive angle, then combine the signs: a minus times a minus is a plus.
- Check: add 360° to the negative angle (as many times as needed) and read the point at the new angle.
- Say what the question asks: a shorter expression with the same value wherever the original is defined.
- Rewrite every tan, cot, sec and csc in sine and cosine, and write quotient identity or reciprocal identity beside the line.
- If an angle is negative, swap cos(−t) for cos t (cosine is an even function) and sin(−t) for −sin t (sine is an odd function).
- Tidy the fractions: multiply straight across, flip and multiply to divide, and put added fractions over one bottom before adding the tops.
- Look for a Pythagorean pattern, such as t + t, 1 − t or 1 + t, swap it for its partner, and name the Pythagorean identity.
- Factor the top and the bottom, then cancel every factor they share.
- If a quotient or reciprocal is left, such as or , you may rename it tan t or csc t.
- Check: work out the start and your answer at one angle, such as 30° or 60°. They must give the same number.
- Read the claim and decide which side is more complicated: more functions, more fractions, more terms or higher powers.
- Copy that side alone. The other side is the target: do not write on it, and do not move anything across the equals sign.
- Rewrite the side one step at a time. Each step is a new line that begins with =, made with the strategies in this lesson: sine and cosine, Pythagorean substitution, factoring, or multiplying by a conjugate.
- Beside each step, name the identity or fraction rule that makes it true.
- Stop when the line reads exactly as the target, and say that the identity holds.
- Check at a test angle such as 30° or 60°: both sides of the claim must give the same number. This catches slips; it does not replace the proof.
- Pick the more complicated side of the claim. It is the only side you will change.
- Write that side alone as your first line, with no equals sign and no other side yet.
- Change it one step at a time, with an identity you name or an algebra move: combining fractions, factoring, or multiplying one fraction's top and bottom by the same expression.
- Before you cancel, check that the factor sits in both the top and the bottom of one fraction.
- Do not square, multiply or divide the two sides of the claim: each of those moves starts from the claim and needs a walk-back check that this method never needs.
- Stop when your line is exactly the other side. If you are stuck, test an angle: two different values there mean the claim is false and no proof exists.
Traps
Testing one angle, seeing the two sides agree, and calling the claim an identity. Agreement proves nothing: sin t + cos t = 1 agrees at 0° and at 90° and is still false, since at 30° the left side is ≈ 1.366, not 1. Use test angles only to disprove; to prove, give a reason that covers every allowed angle.
Matching by first letter. Secant starts with s like sine, so it is tempting to write sec t = . It is the other way round: secant is the flip of cosine, and cosecant is the flip of sine. Use the memory device each pair has one co (sine with cosecant, cosine with secant, tangent with cotangent), then test with a number: sec 0° must be = 1, while = has no value.
Keeping only the positive square root. A Pythagorean identity gives the size of the missing value, not its sign. With sin t = and t in quadrant II, t = 1 − = , so cos t is or −; in quadrant II the point sits left of the y-axis, so cos t = −. After every square root, write both signs and let the quadrant choose.
The most common slip is pulling the minus out of cosine: writing cos(−t) = −cos t. Only the odd functions (sine, cosecant, tangent, cotangent) carry the minus out in front. Cosine and secant are even and drop it, because the mirror across the x-axis never moves the x. Say cos keeps, sin flips before you write the next line.
Canceling a term instead of a factor. You may cross out only a piece that multiplies the entire top and the entire bottom. In the cos t on top is added to sin t, so it does not cancel; the fraction splits into + = 1 + tan t. When the piece is in every term on top, factor first and then cancel: = = 1 + sin t.
The most common mistake is treating the claim like an equation to solve by moving a term across its equals sign, as in turning t − t = 1 into t = 1 + t. That starts from the claim before it is proved, so it shows only where the claim leads, and it is a proof only if every step can be run backwards. Copy one side alone, write = and the next form of that same side, and keep going until it reads exactly as the other side.
The most common mistake is writing the claim as the first line and then doing the same thing to both sides until a true line appears. It feels like solving an equation, but it starts from the very thing you are proving, and the same moves can carry a false claim to a true line, so the true line proves the claim only if every step can be walked back. Start from one side alone and turn it into the other.
Sum and difference formulas
- Why cos(a + b) is not cos a + cos b
- The cosine of a difference, from a distance on the circle
- The cosine of a sum and the sine formulas
- Exact values of angles such as 15 degrees and 75 degrees
- The tangent of a sum or a difference
- Using the formulas from one value of each angle
- Reading a formula backwards
The unit at a glance
Rules
cos(a + b) ≠ cos a + cos b in general: for example, cos( + ) = cos = 0, while cos + cos = . Sine behaves the same way: sin(a + b) ≠ sin a + sin b in general.
For every pair of angles a and b, in degrees or in radians: cos(a − b) = cos a cos b + sin a sin b.
For every pair of angles a and b:
cos(a + b) = cos a cos b − sin a sin b
sin(a + b) = sin a cos b + cos a sin b
sin(a − b) = sin a cos b − cos a sin b
If θ = a + b or θ = a − b, where a and b are special angles, the sum formula or the difference formula gives sin θ and cos θ exactly:
sin(a + b) = sin a cos b + cos a sin b and sin(a − b) = sin a cos b − cos a sin b
cos(a + b) = cos a cos b − sin a sin b and cos(a − b) = cos a cos b + sin a sin b
tan(a + b) = and tan(a − b) =
Both need tan a and tan b to exist. When the bottom is 0, the tangent of the sum or difference is undefined.
One value and the quadrant fix the other value of the same angle: cos a = ± and sin b = ±, each sign chosen by that angle's quadrant. Then sin(a + b) = sin a cos b + cos a sin b and cos(a − b) = cos a cos b + sin a sin b.
sin x cos y − cos x sin y = sin(x − y), for every pair of angles x and y. Every other sum formula and difference formula can be read from right to left in the same way, the tangent ones wherever they are defined; the table lists all six.
Recipes
- Read the parentheses as an instruction: cos(a + b) means add the angles first, then take one cosine of the total.
- To test a claim such as cos(a + b) = cos a + cos b, pick angles whose exact values you know from the unit circle: 0, , , , or π.
- Work the left side: add the angles, find where the total turn lands on the unit circle, and read the x of that point.
- Work the right side: read the x for each angle on its own, then add the two numbers.
- Compare the two sides. If they differ, the claim is false and your pair is a counterexample. If they agree, nothing is proved yet: try another pair.
- Finish with a size check: one sine or one cosine always lies from −1 to 1, so a side outside that range cannot be a single cosine.
- Read what is asked: cos(a − b) is the cosine of one angle, the gap a − b. It is not two cosines with a minus between them.
- Name the angles: a is the angle before the minus sign and b is the angle after it.
- Write the four values cos a, sin a, cos b and sin b from the unit circle or the special triangles, each with the sign its quadrant gives it.
- Multiply the two cosines: cos a · cos b.
- Multiply the two sines: sin a · sin b.
- Add the two products. The sign between them is plus, even though the angle has a minus.
- Check: when the gap a − b is an angle whose cosine you know, the result must equal that cosine.
- Say what the question asks: is it a sine or a cosine, and are the two angles added or subtracted? Call the first angle a and the second b.
- Write the matching formula in letters, sign included, before any number goes in. Cosine matches like with like and switches the sign; sine mixes and keeps it.
- Find the four values cos a, sin a, cos b and sin b from the special triangles or the unit circle.
- Put each value in its place and do the two multiplications: top times top, bottom times bottom.
- Add or subtract the two results as the formula says, and simplify to an exact value: fractions and roots, no rounding.
- Check: if the whole angle a + b or a − b is one whose value you already know, find that value directly and compare.
- Write the angle as a sum or a difference of two special angles, in the order that gives the angle itself (75° = 45° + 30°, 15° = 45° − 30°, −15° = 30° − 45°).
- Pick the formula that matches the question: sine or cosine, sum or difference.
- Write down sin a, cos a, sin b and cos b from the special-angle triangles, each with the sign of its quadrant.
- Substitute the four values into the formula, keeping the sign in the middle.
- Multiply each pair: tops times tops, bottoms times bottoms, and two roots join under one root.
- Combine the two products over their common bottom 4, leaving different roots apart.
- Check: compare the decimal of your answer with a calculator in the right mode, and ask whether the size and sign fit the picture.
- Say what is asked: the tangent of a sum or difference of two angles, either an exact value for one angle or a value from two tangents you are given.
- If you start from one angle, write it as a sum or difference of two angles whose tangents you know. Leave out 90° and 270°, which have no tangent.
- Choose by the sign between the angles: the sum formula for a + b, the difference formula for a − b.
- Put each tangent in its place, and wrap a negative one in parentheses.
- Work out the bottom first. If it is 0, stop: the tangent of the sum or difference is undefined.
- Work out the top, divide the top by the bottom, and clear any square root from the bottom.
- Check: the sign must match the quadrant where the angle lands, and a calculator decimal must match your answer.
- Say in plain words what is given (one value of each angle and its quadrant) and what is asked (for example sin(a + b) and cos(a − b)).
- Write the four-slot list sin a, cos a, sin b, cos b, and copy in the two given values.
- Turn each given value into a right triangle: sine is and cosine is , with any minus sign on x or y and r always positive.
- Find the missing leg with + = , then give it the sign its quadrant demands.
- Write each missing value as that leg over r, so all four slots are full.
- Substitute the four values, each in parentheses, into the sum formula or difference formula, multiply, and combine over the common bottom.
- Check that each answer lies between −1 and 1 and that estimates of the angles give the same sign and size.
- Name the two functions in each product. A sine times a cosine in both products points to a sine formula. A cosine times a cosine in one product and a sine times a sine in the other point to a cosine formula. A fraction of tangents points to a tangent formula.
- Check that the same two angles appear in both products, that each angle switches function from one product to the other, and that no number multiplies only one product. If any check fails, stop: no formula packs it.
- Choose between x + y and x − y with Sine Same, Cosine Changes: a sine pattern keeps the sign between the products as the sign between the angles, a cosine pattern switches it, and a tangent fraction keeps it on top and switches it on the bottom.
- For a difference, put first the angle whose sine, or tangent, comes before the minus sign. With cosine the order does not matter.
- Work out the one angle, giving fractions with π a common bottom, then evaluate its sine, cosine or tangent, or keep the shorter expression when the angle holds a letter.
- Check the answer a second way: a calculator decimal of the whole long side, or a test angle put into both the start and the answer.
Traps
Splitting the cosine over the plus sign: writing cos(a + b) = cos a + cos b, or its twin cos(2a) = 2 cos a. Avoid it by adding the angles first and taking one cosine of the total, then checking that the answer lies from −1 to 1.
Copying the minus sign. The angle inside is a − b, so a minus between the two products feels natural, but the formula has a plus: cos(a − b) = cos a cos b + sin a sin b. Catch it with a = b: the gap is 0° and cos 0° = 1, and only the plus gives a + a = 1.
The sign in the cosine formulas. The cosine of a sum has a minus in the middle, and the cosine of a difference has a plus: cosine switches the sign you see inside, while sine keeps it. With a plus, cos(90° + 90°) would come out 0 · 0 + 1 · 1 = 1, but the point at 180° is (−1, 0), so the true value is −1. Write the formula in letters, sign included, before any number goes in, and say cosine switches, sine stays as you write it.
Getting the sign wrong in the cosine formula. cos 15° = cos(45° − 30°) has a plus in the middle: cos 30° cos 45° + sin 30° sin 45° = ≈ 0.9659. Copying the minus from the angles gives ≈ 0.2588, which is cos 75°, not cos 15°. Catch it with a size check: a small angle such as 15° has a cosine close to 1, so its cosine must be the larger of the two numbers.
Putting the same sign on the bottom as on top, for example 1 + tan a tan b in the sum formula. The bottom always takes the other sign. Test it with 45° + 45° = 90°, where tangent does not exist: the bottom must come out 0, and only 1 − 1 · 1 does.
Dropping the sign of the missing value. The square root gives only the size, as in = 15. Writing cos a = for an angle in Quadrant II turns the main example's sin(a + b) = into −. Choose the sign from the quadrant in the same step where you take the root, before the value goes anywhere near a formula.
Taking the angles in the order they are printed. In a sine difference, the first angle is the one whose sine sits in the product before the minus sign, wherever that sine is written. So cos 20° sin 65° − sin 20° cos 65° is sin(65° − 20°) = , not sin(20° − 65°). The wrong order gives the negative of the right answer, because sin(−45°) = −sin 45°. Before you subtract, find the sine in the product before the minus sign and put its angle first.
Double-angle and half-angle formulas
- The double-angle formulas from the sum formulas
- The three forms of cos 2t and when to use each
- Finding sin 2t and cos 2t from one value and a quadrant
- The power-reducing formulas
- The half-angle formulas and the sign of the answer
- Exact values such as sin 22.5 degrees and cos 105 degrees
- Equations with a double angle
The unit at a glance
Rules
For every angle t: sin 2t = 2 sin t cos t and cos 2t = t − t.
For every angle t whose tangent exists, with tan t ≠ 1 and tan t ≠ −1: tan 2t = .
For every angle t, cos 2t = t − t = 2t − 1 = 1 − 2t. Know cos t only: use 2t − 1. Know sin t only: use 1 − 2t. Know both: use t − t.
The reference triangle joins the center, a point (x, y) on the terminal side of t and the point (x, 0) on the x-axis: its legs, the two sides at the square corner, are |x| and |y| long, its long side is r, + = and r > 0. The given value is a ratio, so take the two of x, y and r it names from its top and bottom (sin t = : y = 5, r = 13); + = gives the size of the third, and the quadrant the signs of x and y; then sin t = and cos t = go into sin 2t = 2 sin t cos t and cos 2t = t − t (or 2 t − 1, or 1 − 2 t).
t = and t = , for every angle t.
Dividing the first by the second gives t = , wherever cos 2t ≠ −1.
sin = ±; cos = ±; tan = ± = =
In each ± form, keep the one sign the function has in the quadrant where lies, not where t lies. The two tangent fractions carry their own sign, and each holds where its bottom is not 0.
For an angle θ whose double t = 2θ is a special angle:
sin θ = ± and cos θ = ±, with the sign that sin θ or cos θ has in the quadrant of θ itself, not of t.
If A · B = 0, then A = 0 or B = 0 (the zero-product property).
To solve an equation with a double angle for 0 ≤ t < 2π: rewrite the double angle so only t appears, move every term to one side so the other side is 0, factor, and set each factor equal to 0. Never divide both sides by sin t or cos t, which can be 0.
The pattern: sin 2t = sin t becomes 2 sin t cos t − sin t = 0, then sin t (2 cos t − 1) = 0, so sin t = 0 or cos t = .
Recipes
- Say in plain words what is asked: "find sin 2t" means "find the sine of the angle twice as big as t", not "double the sine of t".
- List what the formula needs, with signs: sin t and cos t for sin 2t and cos 2t; tan t for tan 2t, where tan t = .
- Write the formula, then put each value in parentheses where its name was.
- Work in order: squares first, then products, then the subtraction; for tan 2t, finish the top and the bottom before you divide.
- Check a second way: (sin 2t + (cos 2t must be 1, and tan 2t must equal .
- Say what you have and what you want: the problem gives cos t, sin t, or both, and wants cos 2t, the cosine of the angle twice as big.
- Pick the form that uses only what you have: cos t alone, the cosine form 2t − 1; sin t alone, the sine form 1 − 2t; both, the first form t − t.
- Put the known value in parentheses and square it: square the top and the bottom, and a minus sign disappears.
- Double, then subtract, in the order the form shows. Write 1 as a fraction with the same bottom before you subtract.
- Check: the answer must be between −1 and 1. Then find the missing square from t + t = 1, work a second form, and compare.
- Say what is given (one value of t and where t ends) and what is asked (sin 2t, cos 2t, or both).
- Turn the given value into two sides of the reference triangle with sin t = , cos t = or tan t = . Put any minus sign on x or y, never on r.
- Find the third side from + = . For r keep the positive root; for a leg keep both roots for a moment.
- Let the quadrant choose the leg's sign: x is negative left of the y-axis (Quadrants II and III), and y is negative below the x-axis (Quadrants III and IV). Plug the leg back into + = to confirm it.
- Write sin t and cos t as signed fractions.
- Substitute into sin 2t = 2 sin t cos t and a form of cos 2t, then simplify.
- Check with a second form of cos 2t, with (sin 2t + (cos 2t = 1, and with the sign of sin 2t.
- Find the square, or of some angle, and read the whole angle inside it: in 3t the angle is 3t.
- Choose the formula by the name: a sine squared takes the minus, A = ; a cosine squared takes the plus, A = .
- Double the whole angle for the new cosine: 3t becomes 6t, and 75° becomes 150°.
- Keep the bottom 2, and multiply any number in front through: 6 · = 3(1 − cos 2t) = 3 − 3 cos 2t.
- If a new square shows up, such as 2t, use the cosine formula again with the angle doubled again: 2t = .
- Check: put a special angle such as t = 30° into the start and into the finish; the two numbers must match.
- Get cos t. Every half-angle formula needs the cosine of the whole angle.
- Divide the bounds on t by 2 to find where lies, and read the sign there.
- Put cos t into 1 − cos t (for sine) or 1 + cos t (for cosine), then divide by 2.
- Take the square root of the top and the bottom, and rationalize if a root is left in the bottom.
- Replace ± with the one sign from step 2.
- For tangent, divide your sine by your cosine, or use .
- Check that + = 1.
- Double the angle you want, θ, to get t = 2θ. Check that t is a special angle, a multiple of 30° or 45°. If t is more than 360°, take away 360° only to look up its cosine.
- Choose the sign from the quadrant of θ itself, not of t, and write it down before any arithmetic.
- Look up cos t exactly: find the reference angle, take the value from the special triangle, and give it the sign of t's quadrant.
- Put cos t into the form: sin θ uses and cos θ uses .
- Simplify: write 1 as and combine, divide by 2 by doubling the bottom to 4, then take = 2 out of the bottom. The top keeps its root, so the answer is a nested radical, a root with another root inside, such as . Put the sign in front.
- Check: compare decimals with a calculator, or run the answer back through a double-angle formula or a sum formula.
- Say what the question asks: every angle t with 0 ≤ t < 2π that makes the two sides equal.
- Rewrite the double angle so only t appears: sin 2t = 2 sin t cos t. For cos 2t, use 1 − 2t when the rest of the equation is in sine and 2t − 1 when it is in cosine.
- Move every term to one side by adding or subtracting, so the other side is 0. Never divide by anything that contains t.
- Factor: pull out the piece every term shares, or factor the quadratic.
- Set each factor equal to 0, and solve each small equation on the unit circle with the table in this lesson.
- Collect every angle from every factor, once each and in order around the circle, then check each one in the original equation.
Traps
Reading sin 2t as 2 sin t. The 2 sits inside the sine, on the angle, so it doubles the turn, not the answer, and doubling the turn does not double the height: sin 30° = , but sin 60° = ≈ 0.87 (rounded), not 1. To avoid it, say "sine of two t" out loud and reach for 2 sin t cos t, which needs the cosine too. The same goes for cos 2t and tan 2t.
Putting the value into the wrong form. With sin t = , writing 2 · ( − 1 = − uses the cosine form for a sine value; the sine form gives 1 − 2 · = . The two answers differ only in sign, so the slip is hard to spot. Before you substitute, check that the letter in the form, sin or cos, matches the letter of the value you know, and try the form at t = 0: a true form gives 1.
The most common mistake is giving the new leg the wrong sign, nearly always by keeping the positive root without looking at the quadrant. = 144 gives 12 and −12, and only the quadrant chooses between them. The wrong sign is hard to spot: cos 2t comes out the same, because it uses only squares, and (sin 2t + (cos 2t = 1 still holds, yet sin 2t has the wrong sign. Sketch the point before you compute, and test sin 2t against the pattern: positive for t in Quadrant I or III, negative for t in Quadrant II or IV.
Forgetting to double the angle. The cosine on the right always carries twice the angle of the square on the left: t goes with cos 2t, 3t with cos 6t, 40° with cos 80°. Writing for t gives at t = 90°, where 90° is 1. Before moving on, point at the angle in the square, double it, and make sure that double is what you wrote.
Taking the sign from the quadrant of t instead of . With cos t = − and π < t < , t is in Quadrant III, where sine is negative, so it is tempting to write sin = −. But the formula gives the sine of , which lies between and , in Quadrant II, where sine is positive: sin = . Halve the bounds and name the quadrant of before any arithmetic.
Taking the sign from the doubled angle instead of the angle you want. For cos 67.5°, the double, 135°, is in quadrant II, where cosine is negative, so a minus in front is tempting. But the question is about 67.5°, which is in quadrant I, where every value is positive: cos 67.5° = +. The negative cos 135° belongs inside the root, not in front. To avoid the mistake, sketch the angle you want before any arithmetic, decide its sign, and write that sign in front of the root right away.
Dividing both sides by sin t (or cos t) to make the equation shorter. It looks harmless, but wherever sin t = 0 that is a division by 0, and those angles are answers: dividing sin 2t = sin t by sin t loses t = 0 and t = π. Subtract instead, factor sin t out, and give sin t = 0 its own small equation.