Quarry School

College Algebra: study guide

about 65 min to listen17 units133 lessonsevery crash course: about 7 h 35 min

The units in study order. For each: what it asks, every rule, every trap, and its crash course.

1 Functions and function notation

crash course: about 42 min10 lessons13 questions to tryOpen the crash course

What it asks. You begin by deciding what counts as an input and whether it determines one output. Then you learn to read function notation and find values from tables, formulas, and graphs. You practice both directions: using an input to find an output, and finding every input that produces a stated output. You build the difference quotient, which measures average output change like average speed, then learn when outputs identify unique inputs. The two line tests and nine toolkit functions connect these ideas to pictures.

Rule A function gives one answer to each input

A relation is a set of ordered pairs (input, output).

It is a function when every input in its domain has exactly one output. The range is the set of outputs it produces.

Trap A function gives one answer to each input

Checking for repeated outputs instead of conflicting inputs. Two arrows arriving together are allowed; two arrows leaving one input for different answers are not.

Rule Read function notation as an instruction

y=f(x): f is the function name, x is the input, and y or f(x) is the output.

Evaluate means find an output. Solve means find the input or inputs producing a specified output.

Trap Read function notation as an instruction

Reading f(x) as f times x. A function name identifies a rule rather than a number being multiplied.

Rule Evaluate a formula

To evaluate a formula, replace every input variable with the whole stated input in parentheses, then calculate or expand.

The value or expression you obtain is the output.

Trap Evaluate a formula

Losing the middle term when squaring a sum. Write (a + h)(a + h) and keep all four products before combining the two ah terms.

Rule The difference quotient: average rate of change

Difference quotient: f(x+h)−f(x)h, with h≠0 and both inputs in the domain.

Read it: f of x plus h, minus f of x, all over h. The starting input can also be named a: f(a+h)−f(a)h.

Trap The difference quotient: average rate of change

Subtracting only the first term of the starting output. Keep −(f(x)) as one group, then change every sign inside.

Rule Solve when the output is given

To solve f(x)=k, set the function's formula equal to k and find every allowed input x.

Zero product rule: AB =0 means A=0 or B=0, or both.

Trap Solve when the output is given

Treating a requested output as an input. In h(p) = 3, set the formula equal to 3; do not evaluate h(3).

Rule Turn an equation into a function when possible

Choose the input and output.

An explicit rule gives the output alone in terms of the input.
An implicit rule keeps them mixed in an equation. Function status requires exactly one output for each allowed input.

Trap Turn an equation into a function when possible

Discarding the negative square-root solution when the original equation permits it. A root expression chooses one branch; a squared equation may include both.

Rule Evaluate and solve from tables and graphs

Evaluate g(3): input 3 is given; read its output.

Solve g(n)=6: output 6 is given; find every input paired with it. A point (x, y) on a function graph means y=f(x).

Trap Evaluate and solve from tables and graphs

Reading only the first matching output when solving. Scan the whole table or the whole horizontal level of the graph before writing the solution set.

Rule One-to-one means each output identifies one input

A one-to-one function gives different outputs to different inputs.

Equivalently, each value in its range comes from exactly one input. Check function status first, then check for shared outputs.

Trap One-to-one means each output identifies one input

Calling a function one-to-one after checking only that each input has one output. Also check that no two different inputs share an output, and state the domain.

Rule Vertical and horizontal lines answer different questions

Vertical line test: a graph represents a function exactly when every vertical line meets it at most once.

Horizontal line test: a function is one-to-one exactly when every horizontal line meets its graph at most once.

Trap Vertical and horizontal lines answer different questions

Using the horizontal line test to decide function status. Check vertical first, then horizontal, and label the conclusion from each test.

Rule Meet the nine toolkit functions

Toolkit functions: constant c, identity x, absolute value |x|, quadratic x2, cubic x3, reciprocal 1x, reciprocal squared 1x2, square root x, and cube root x3.

For each, connect formula, graph, domain, range, and a sample table.

Trap Meet the nine toolkit functions

Memorizing a graph shape without checking its input and output restrictions. The square and square-root functions both stay at nonnegative heights, but only the square root excludes negative inputs.

2 Domain and range

crash course: about 24 min10 lessons15 questions to tryOpen the crash course

What it asks. First you separate the inputs a function accepts from the outputs it reaches. You learn to find allowed inputs by checking the arithmetic, then write those inputs with inequalities, sets and intervals. Next you read the two sets from graphs and explain the behavior of all nine toolkit functions. Finally you use different formulas on different input intervals, choose the correct rule at a boundary, and build the resulting graph.

Rule Domain and range: what can go in and what can come out

Domain = all permitted inputs.

Range = all outputs actually reached by those inputs; a function assigns one output to each input.

Trap Domain and range: what can go in and what can come out

Replacing a listed domain {−4, 0, 3, 5} with [−4, 5]. That interval would add every number between the endpoints. A finite list includes only its listed entries.

Rule Find the domain by checking the arithmetic

Every denominator must be nonzero; every even-root radicand must be ≥0.

Keep inputs satisfying all restrictions, plus any supplied domain or contextual conditions.

Trap Find the domain by checking the arithmetic

Changing ≥ 0 to > 0 whenever you see a square root. 0 is allowed. Strict positivity is needed for a square root that must itself be a nonzero denominator, such as 1x−3.

Rule Factor a denominator and keep every original exclusion

(x+p)(x+q)=x2+(p+q)x+ pq.

To factor x2+ Bx +C, find p+q=B and pq =C.
Exclude every input making the original denominator zero, and retain those exclusions after cancellation.

Trap Factor a denominator and keep every original exclusion

Canceling a factor and then forgetting its zero input. The shorter expression equals the original only where the original denominator was nonzero. Record every exclusion before canceling.

Rule Write the same set three ways

Use [ or ] for an included endpoint, ( or ) for an excluded endpoint or infinity.

Write intervals from smaller to larger; union (∪) means or, including membership in both sets.

Trap Write the same set three ways

Writing [1, ∞) for [1, 3] ∪ (5, ∞). That would fill the missing region after 3 through 5. The union symbol joins sets without filling gaps.

Rule Read domain and range as shadows of a graph

Domain = the graph's horizontal shadow on the x-axis.

Range = its vertical shadow on the y-axis; include a coordinate if any included point reaches it.

Trap Read domain and range as shadows of a graph

Deleting an output height because one point at that height is hollow. Look across the whole graph. A different included point can still put that height in the range.

Rule The first five toolkit functions

For the toolkit formulas c, x, |x|, x2, and x3, the domain is (−∞,∞).

Their ranges are {c}, (−∞,∞),[0,∞),[0,∞), and (−∞,∞), respectively.

Trap The first five toolkit functions

Giving every unrestricted formula an all-real range. An unrestricted domain tells you about inputs. It does not make negative outputs possible for a square or a distance.

Rule Reciprocals and roots complete the toolkit

For 1x: x≠0 and y≠0.

For 1x2: x≠0 and y > 0.
For x: x≥0 and y≥0. For x3: x and y may be any real numbers.

Trap Reciprocals and roots complete the toolkit

Treating all roots as square roots, or all reciprocals as positive. An odd root accepts negative inputs. A reciprocal can be negative; reciprocal squared is positive because its denominator is squared.

Rule Use toolkit behavior to find a changed function's range

Find the domain from the inside arithmetic.

Find the range from the final output, and show every claimed output is attained.
A function continuous on the whole real line, with arbitrarily negative and positive outputs, has range (−∞,∞).

Trap Use toolkit behavior to find a changed function's range

Listing outputs that seem possible without showing that an input produces them. Excluding zero, or observing a sign, may give a restriction but does not by itself prove the whole range.

Rule Write and evaluate a piecewise function

Choose the condition your input satisfies, then use that piece's formula.

The whole domain is the union of the pieces' domains; each allowed input must receive one output.

Trap Write and evaluate a piecewise function

Using a formula because it is familiar before reading its condition. At g = 2 the data plan uses the g ≥ 2 piece. At g = 0 neither piece applies.

Rule Graph each piece only where its condition allows it

Draw each branch only on its assigned interval, using open dots for strict boundaries and closed dots for included ones.

Combine the pieces; domain is the input union and range is the union of reached output heights.

Trap Graph each piece only where its condition allows it

Joining the endpoint (1, 1) to the hollow endpoint (1, 3) with a vertical segment. That segment would create many outputs for x = 1. A jump stays a jump; it is not filled in.

3 Rates of change and behavior of graphs

crash course: about 27 min10 lessons18 questions to tryOpen the crash course

What it asks. You will measure how much an output changes for each unit of input, using a table, a graph, or a formula. You will then build reusable rate expressions, including the difference quotient, so one calculation can describe many intervals. Next you will read graphs from left to right to find rising, falling, and level stretches, and the heights of nearby peaks and valleys. Finally, you will find the highest and lowest values on the entire domain, remembering that one value can occur at more than one point and that some functions never reach a highest or lowest value.

Rule Rate of change and average rate of change

Average rate of change =ΔyΔx=y2−y1x2−x1=f(x2)−f(x1)x2−x1, with x2≠x1 and both outputs defined.

Use the same endpoint order on top and bottom. Units are output units per input unit.

Trap Rate of change and average rate of change

Subtracting in different orders on top and bottom flips the sign. Point 2 minus point 1 must be used for both output and input changes.

Rule On a graph, the average rate of change is a slope

For [a,b]= [left end, right end], with a < b and both outputs defined, average rate =f(b)−f(a)b−a.

This is the slope of the straight ruler through (a, f(a)) and (b, f(b)).

Trap On a graph, the average rate of change is a slope

Putting right-minus-left on top and left-minus-right on the bottom reverses the sign. Keep each input paired with its output and use one order twice.

Rule Average rate of change from a formula

On [a,b]= [left end, right end], with a < b and both outputs defined, average rate =f(b)−f(a)b−a.

Evaluate the two endpoint outputs first, then subtract and divide. Preserve all nonzero-bottom and square-root restrictions.

Trap Average rate of change from a formula

Stopping after subtracting gives only the output change. Divide by the input change to get the average rate.

Rule When an endpoint is a letter, the answer is an expression

For a fixed input 5 and an endpoint a, rate =f(a)−f(5)a−5, with a≠5 and both outputs defined.

On [5, a], a > 5; if a < 5, use the sorted interval [a, 5]. Factor a polynomial numerator before canceling a matching whole factor.

Trap When an endpoint is a letter, the answer is an expression

Canceling pieces of sums instead of whole multiplied factors, or forgetting the excluded endpoint after cancellation.

Rule The difference quotient: average rate of change from x to x + h

Difference quotient =f(x+h)−f(x)h, with h≠0 and both outputs defined.

It is the average rate on [x,x+h] if h > 0, and on the sorted interval [x+h,x] if h < 0.

Trap The difference quotient: average rate of change from x to x + h

Adding h to the old output, treating f as a multiplier, or allowing a zero input step. Substitute x + h into the whole function formula and keep h ≠ 0.

Rule Difference quotient of a quadratic

(x+h)2=x2+2xh +h2.

For f(x)=x2, the difference quotient is 2x+h, with h≠0. Multiply any outside coefficient into every expanded term, subtract all of f(x), then factor the whole numerator before canceling h.

Trap Difference quotient of a quadratic

Losing the middle term, squaring an outside coefficient, or forgetting that h2 ÷ h = h. Show the full square expansion before subtracting.

Rule Difference quotient of a fraction

For f(x)=2x, combine the output difference over x(x+h), then divide by h to obtain −2x(x+h).

Require h≠0,x≠0, and x+h≠0. Other fraction bottoms need their own product as the common bottom.

Trap Difference quotient of a fraction

Subtracting bottoms, splitting a denominator sum, or losing the minus on the second numerator. Use a common bottom, subtract the whole second top, then divide by h.

Rule Increasing, decreasing, and constant

On an interval, whenever a < b: increasing means f(a) < f(b); decreasing means f(a) > f(b); constant means f(a)=f(b).

This course reports intervals of behavior with open endpoints. These are comparisons between inputs, not a direction assigned to one point.

Trap Increasing, decreasing, and constant

Writing the intervals in y-values, for example 'increasing from −2 to 5' because the heights run from −2 to 5. Intervals of increase and decrease are always inputs (x-values or t-values), read along the horizontal axis.

Rule Local maxima and minima

A local maximum at input b has f(b)≥f(x) for every x in some open interval around b contained in the domain.

A local minimum has f(b)≤f(x) there. Its value is f(b); its location is b; its point is (b, f(b)). Equal nearby heights are allowed by these nonstrict inequalities. A strict local extremum uses > or < for every nearby x≠b.

Trap Local maxima and minima

Saying 'the maximum is x = 1'. The maximum is the output, 2; x = 1 is where it happens. On the exam write both: 'local maximum of 2 at x = 1'.

Rule Toolkit behavior, then absolute maximum and minimum

The absolute maximum is f(c) when c is in the domain and f(c)≥f(x) for every domain input x.

The absolute minimum is f(d) when d is in the domain and f(d)≤f(x) for every domain input x. The value must be attained, meaning reached at an accepted input.

Trap Toolkit behavior, then absolute maximum and minimum

Calling the highest point visible in a picture the absolute maximum when an arrow shows the graph keeps rising beyond the window. Check how the graph behaves at its ends before you name an absolute maximum or minimum.

4 Composition of functions

crash course: about 15 min10 lessons16 questions to tryOpen the crash course

What it asks. A day determines a temperature, and that temperature determines a heating cost, so one function's answer can become another function's input. This section first compares arithmetic on two function outputs with composition, which connects functions in order. You will follow that connection through tables, graphs, and formulas, then check both stages to find the allowed starting inputs. Finally, you will split a complicated formula into the jobs that build it. The practice covers the kinds of questions used in section 1.4: arithmetic combinations, compositions in either order, tables, graphs, domains, and splitting a formula.

Rule Combine two functions with arithmetic

(f+g)(x)=f(x)+g(x); (f−g)(x)=f(x)−g(x); (fg)(x)=f(x)·g(x); (fg)(x)=f(x)g(x).

Use inputs allowed by both functions; for the quotient also require g(x)≠0.

Trap Combine two functions with arithmetic

Subtracting only the first term of a function. (x2 − 1) − (x − 1) subtracts the entire second expression, so both of its signs change.

Rule Composition passes one answer into the next function

(f∘g)(x)=f(g(x)).

First apply g, then apply f to g's output.
The product (fg)(x)=f(x)·g(x) is a different operation.

Trap Composition passes one answer into the next function

Starting with f because its name appears first. In f ∘ g, g receives the original input. Expand the circle notation before calculating.

Rule Order changes the result, and units must fit

Usually f(g(x))≠g(f(x)) as functions.

Check both orders rather than assuming equality.
For a meaningful composition, the inner output must be an acceptable outer input, including its units.

Trap Order changes the result, and units must fit

Treating a valid arithmetic calculation as proof that an application makes sense. Label the units as well as the numbers.

Rule Follow a composition through tables

To evaluate f(g(a)) from tables, read g(a), then use that output as the input for the f lookup.

A composition is defined only when both lookups exist.

Trap Follow a composition through tables

Reading the same input column in both pictures. The outer lookup uses the inner output, which can move you to a new column.

Rule Follow a composition across two graphs

For f(g(a)): read the y-value of g at x=a; use that number as the x-value on f; read f's y-value.

A point (a, b) on g means g(a)=b.

Trap Follow a composition across two graphs

Using the first graph's output as a height on the second graph. Move it to the second x-axis before finding the outer output.

Rule Evaluate formulas one number at a time

For f(h(a)), calculate h(a) first; then substitute that entire numerical answer into every input slot of f.

The input-variable letter does not change the instructions.

Trap Evaluate formulas one number at a time

Replacing only the squared input in t2 − t. The same input goes into both positions, so f(5) is 52 − 5.

Rule Substitute the whole inside expression

To form f(g(x)), replace every input-variable occurrence in f with the whole parenthesized expression g(x).

(a+b)2=a2+2ab+b2, because (a+b)(a+b) has two cross products ab.

Trap Substitute the whole inside expression

Writing (2x + 1)2 = 4x2 + 1. The square multiplies two whole sums, so the two cross products must appear.

Rule A composite domain has two gates

The domain of f∘g consists of the x values allowed by g for which g(x) is allowed by f.

Keep original restrictions when simplifying the composite formula.

Trap A composite domain has two gates

Checking only the simplified final denominator. That can lose an inner restriction which disappeared during algebra.

Rule Square roots add boundary checks

A(x) requires A(x)≥0.

A denominator A(x) requires A(x) > 0.
For f(g(x)), apply every root requirement at its own stage and keep both gates.

Trap Square roots add boundary checks

Demanding a positive radicand for every square root. Ordinary roots allow zero; roots in denominators must avoid zero because of division.

Rule Decompose by naming the inside and outside jobs

To write h(x)=f(g(x)), choose g as the inside job and f as the job applied to its output.

Check by substitution and preserve h's original domain.

Trap Decompose by naming the inside and outside jobs

Giving the two correct component formulas in the wrong order. Recompose f(g(x)) on paper before accepting your decomposition.

5 Transformation of functions

crash course: about 41 min8 lessons15 questions to tryOpen the crash course

What it asks. Start with vertical shifts, then learn why horizontal shifts move in the opposite direction from the sign inside the function. Combine those moves and track what happens to the allowed inputs and possible heights. Next, reflect graphs and use those reflections to decide whether a function is even, odd, or neither. Finish with stretches, compressions, and a point rule that keeps several transformations in the correct order.

Rule Vertical shifts: move every height by the same amount

g(x)=f(x)+k sends (u, v) to (u,v+k).

Positive k moves up; negative k moves down. The domain stays the same; every range value gains k.

Trap Vertical shifts: move every height by the same amount

Changing x when the added number is outside. For f(x) + 3, finish finding the old height first and then add 3; the left-to-right address stays put.

Rule Horizontal shifts: why the inside acts in the opposite direction

g(x)=f(x−h) sends (u, v) to (u+h,v).

Positive h moves right; negative h moves left. Solve new input −h= old input whenever the sign feels uncertain.

Trap Horizontal shifts: why the inside acts in the opposite direction

Reading f(x + 3) as right 3. Set x + 3 equal to an old input: x = old input − 3, so the graph moves left. The equation explains the direction when a memorized slogan feels unreliable.

Rule Combine shifts and read the domain and range

g(x)=f(x−h)+k sends (u, v) to (u+h,v+k).

These shifts commute, meaning either order gives the same graph, because each changes a different coordinate.

Trap Combine shifts and read the domain and range

Moving the corner correctly but leaving the old domain and range. For x+2 + 3, the allowed inputs start at −2 and the heights start at 3. Check the inside restriction and the lowest height separately.

Rule Reflections: the minus sign tells you which coordinate changes

Vertical reflection: g(x)=−f(x), with (u, v) becoming (u,−v).

Horizontal reflection: h(x)=f(−x), with (u, v) becoming (−u,v).

Trap Reflections: the minus sign tells you which coordinate changes

Choosing the mirror axis from the coordinate that changes. A vertical reflection changes y but reflects across the x-axis. A horizontal reflection changes x but reflects across the y-axis. Name the mirror line and the moving coordinate separately.

Rule Even, odd, or neither: test the whole formula

On a domain symmetric about zero: even means f(−x)=f(x); odd means f(−x)=−f(x), for every allowed x.

If neither identity holds for all allowed inputs, the function is neither. The zero-valued function on a symmetric domain satisfies both identities.

Trap Even, odd, or neither: test the whole formula

Calling a function odd because some terms change sign. Odd means the entire output changes sign, including its constant term. Compare with −f(x) written in full. A few matching number pairs can check a proof, but cannot replace an identity that covers every input.

Rule Vertical stretch and compression: multiply the heights

For g(x)=a·f(x), (u, v) becomes (u,a·v).

If |a| > 1, stretch vertically; if 0 < |a| < 1, compress vertically.
If a < 0, also reflect across the x-axis. If a=0, all defined outputs become zero; this is a collapse, not an ordinary stretch or compression.

Trap Vertical stretch and compression: multiply the heights

Saying a stretch moves every point upward. A positive scale larger than 1 sends positive outputs up and negative outputs down, increasing distance from the x-axis. Also keep a·f(x) separate from f(ax): the bottom two table rows preview the horizontal-coordinate changes explained in lesson 7.

Rule Horizontal stretch and compression: divide the input coordinates

g(x)=f(bx),b≠0, sends (u, v) to (ub,v).

|b| > 1 compresses horizontally; 0 < |b| < 1 stretches horizontally. If b < 0, also reflect across the y-axis.

Trap Horizontal stretch and compression: divide the input coordinates

Calling f(2x) a horizontal stretch because 2 is bigger than 1. The multiplier is bigger, but the coordinate must be smaller: 2x = u gives x = u ÷ 2. Also, f(2x) and 2f(x) generally give different graphs.

Rule Put everything together: factor first, then move points

For g(x)=a·f(b(x−h))+k with b≠0, the Point rule is (u, v) to (ub+h,a·v+k).

Factor first; scale or reflect each coordinate before shifting that coordinate.

Trap Put everything together: factor first, then move points

Using 6 as the final shift in f(2x − 6), or shifting a height before scaling it. Factor the input and write the two coordinate equations. For a·f(b(x − h)) + k, divide then add h horizontally, and multiply then add k vertically.

6 Absolute value functions

crash course: about 23 min10 lessons17 questions to tryOpen the crash course

What it asks. Absolute value measures distance even when positions point in opposite directions, as they do along a street or when astronomers describe directions in space. You use it to write a machinist's tolerance, a poll's margin of error, and a thermostat's allowed temperature change. You build and read the V graph, then recover its equation from the corner and one other point. You solve equations by undoing outside operations and considering both directions of a possible distance. Finally, you solve inequalities, decide which endpoints count, and use boundaries to find where a function's output is positive or negative.

Rule Absolute value measures distance

|x|=x when x≥0; |x|=−x when x < 0.

Nonnegative means zero or positive. Opposite means the same distance from zero on the other side: the opposite of −7 is 7. Always |x|≥0, and |x|=0 exactly when x=0. A piecewise function chooses one instruction according to the input: use the first line for zero or positive inputs, the second for negative inputs.

Trap Absolute value measures distance

Making individual numbers positive before finishing the inside changes the problem. In |−3 + 5|, the wrong calculation |3 + 5| gives 8; the correct inside is 2, so the answer is 2. In |2 − 9|, changing subtraction to addition gives 11; the correct inside is −7, so the answer is 7.

Rule Distance from a center and tolerance

Distance between two real numbers A and B is |A−B|=|B−A|.

Here A and B name the two positions. For an allowed distance r≥0 from center c, at most r means |x−c|≤r, with ends c−r and c+r included. Strictly less than r means |x−c|<r, with the ends excluded. Exactly r means |x−c|=r. At least r means |x−c|≥r. More than r means |x−c|>r. The sign ± is read plus or minus: c±r names the lower limit c−r and upper limit c+r. If r=0, the two end positions coincide at c; an exact zero distance has only that one position.

Trap Distance from a center and tolerance

The center and permitted distance have different jobs. In |R − 680| ≤ 34, 680 names the rating, while 34 says how far the measurement may depart from it.

Rule Build and read the V graph

For f(x)=a|x−h|+k with a≠0: a is the number multiplying the distance, h is its horizontal center, and k is the outside added height.

Vertex: (h, k). Left slope: −a; right slope: a. It opens up if a > 0 and down if a < 0. Domain: all real numbers. Range: y≥k if a > 0; y≤k if a < 0.

Trap Build and read the V graph

Reading x − 3 as a left shift. Find where the inside is zero: x − 3 = 0 gives x = 3, so the corner moved right. The memory device is 'inside lies, outside tells the truth'; the zero calculation explains it.

Rule Write an equation from a graph

Vertex form is f(x)=a|x−h|+k.

From vertex (h, k) and another point (p, q) with p≠h: a=q−khorizontaldistance, where horizontal distance =|p−h|. For an upward V, width at height D above the corner is 2D÷a, with D > 0. An x-intercept, or horizontal intercept, is a point (x, 0); its input is called a zero.

Trap Write an equation from a graph

Dividing by p − h instead of |p − h|. A point left of the corner has a negative coordinate difference, but its distance is positive. Keep the bars so a correctly records whether the V opens up or down.

Rule Solve an absolute value equation

Isolate |A|=B first.

For B > 0, solve A=B or A=−B. For B=0, solve A=0. For B < 0, there is no solution. These give two, one, or no inputs when A= mx +c and m≠0. Check every input in the original equation.

Trap Solve an absolute value equation

Splitting before isolating, or keeping only the positive branch. In 3|x + 2| − 4 = 11, the needed distance is 5, not 11. Box the isolated equation, then choose its branches.

Rule Find zeros and axis intercepts

Zeros: solve f(x)=0 to find the inputs whose output is zero.

Their x-intercepts are (x, 0). y-intercept: evaluate f(0) and write (0, f(0)). In a|x−h|+k with a≠0: opposite signs for a and k give two x-intercepts; k=0 gives one; the same nonzero sign gives none. The full V always has exactly one y-intercept.

Trap Find zeros and axis intercepts

Substituting x = 0 when asked for zeros. That finds the y-intercept. For zeros set the output to 0 and leave x unknown.

Rule Less than B means between

For B > 0: |A| < B means −B<A<B; |A|≤B means −B≤A≤B.

Both comparisons must hold: 'and'. A is everything inside the bars; B is the number on the other side.

Trap Less than B means between

Changing only the middle of a three-part inequality, or treating < and ≤ alike. Every algebra move acts on all three parts, and the original sign decides whether the boundary belongs.

Rule More than B means outside

For B > 0: |A| > B means A<−B or A > B; |A|≥B means A≤−B or A≥B.

For an inside line with a nonzero number multiplying x, solve each alternative and join its two outside intervals with ∪.

Trap More than B means outside

Using 'and' for an outside condition. No x can be both less than −4 and greater than 3. Use 'or', and use ∪ to keep both permitted pieces.

Rule Use boundaries and graphs to find positive or negative outputs

Find boundaries by solving the corresponding equality.

Test one input inside each interval between boundaries, or compare graph heights. For f(x) < 0, choose the portions below the x-axis; for f(x) > 0, choose those above. Negative multiplication or division flips every comparison sign. Allow a boundary only when its original comparison permits equality.

Trap Use boundaries and graphs to find positive or negative outputs

Multiplying by −2 and keeping the less than sign would select the center, where this function is positive. Flip the sign immediately and confirm your answer with an actual output from each chosen interval.

Rule When B is zero or negative

If B < 0: |A|=B, |A| < B, and |A|≤B have no solution; |A| > B and |A|≥B hold for every allowed input.

If B=0: |A|=0 and |A|≤0 mean A=0; |A| < 0 has none; |A| > 0 means A≠0; |A|≥0 holds for every allowed input.

Trap When B is zero or negative

Using the formulas for B positive before checking the isolated limit. |x − 6| > −2 is true for every real x, so it does not need a pair of boundary equations.

7 Inverse functions

crash course: about 21 min7 lessons15 questions to tryOpen the crash course

What it asks. A function takes an input to an output, and its inverse runs the other way, taking each output back to the input it came from. This unit starts with what that undoing means and what the notation f−1 says, then shows how to check that two functions undo each other by composing them in both orders. Next it sorts out which functions can be undone at all, using one-to-one functions and the horizontal line test, and shows why the domain and the range trade places. It ends with three ways to find an inverse: from a table by swapping the two rows, from a graph by mirroring it in the line y = x, and from a formula by swapping and solving, including what to do when a domain must be restricted first.

Rule Undoing a function, and what f^-1 means

When f has an inverse function and f(a)=b, then f−1(b)=a.

The inverse function f−1 takes each output of f back to the input it came from. The −1 is part of the name, not a power: f−1(x) does not mean 1f(x).

Trap Undoing a function, and what f^-1 means

Reading f−1(x) as 1f(x). On the name of a function, −1 means inverse, not 1 over. To avoid the mistake, say f inverse out loud and turn f−1(b) into the question f(?) = b before you compute anything. When 1 over f(x) is meant, it is written 1f(x)−1 or [f(x)], with the −1 outside brackets.

Rule Checking that two functions are inverses

Two functions f and g are inverses of each other exactly when both of these are true: f(g(x))=x for every input x that g accepts, and g(f(x))=x for every input x that f accepts.

When both hold, g is f−1 and f is g−1. If either one fails, even for a single input, they are not inverses.

Trap Checking that two functions are inverses

Stopping after one order. Getting f(g(x)) = x feels like the finish, but it is half of the test. With f(x) = x2 and g(x) = x, the first order gives (x)2 = x and passes, while the second order gives g(f(−3)) = 9 = 3, which is not −3. Always write both lines, f(g(x)) and g(f(x)), before you answer yes.

Rule One-to-one functions and the horizontal line test

A function f is a one-to-one function when different inputs always give different outputs: f(a) = f(b) happens only when a = b.

A function has an inverse function exactly when it is one-to-one. Horizontal line test: a function is one-to-one exactly when no horizontal line meets its graph at more than one point.

Trap One-to-one functions and the horizontal line test

Using the wrong line. A vertical line tests whether a graph is a function at all. A horizontal line tests whether that function is one-to-one. The graph of y = x2 passes the first test and fails the second. Say the question out loud before you draw the line: "does one input have two outputs?" calls for a vertical line, and "do two inputs share one output?" calls for a horizontal line.

Rule Domain and range trade places

If f is a one-to-one function, then: domain of f−1= range of f, and range of f−1= domain of f.

Trap Domain and range trade places

Writing the domain of f again as the domain of f−1. The two functions trade their lists, and the two lists are often different. For f(x) = x−2 + 1 the tempting answer is 'domain of f−1: [2, ∞)', but [2, ∞) is what f−1 gives back, not what it takes in. To avoid this, write two labeled lines before you answer, 'goes into f−1' and 'comes out of f−1', and fill the first line from the outputs of f.

Rule Reading an inverse from a table and from a graph

If f is a one-to-one function, then: (1) the table of f−1 is the table of f with its two rows traded; (2) the point (a, b) is on the graph of f exactly when the point (b, a) is on the graph of f−1; (3) the graph of f−1 is the graph of f reflected (flipped, as in a mirror) across the line y=x.

Trap Reading an inverse from a table and from a graph

Reading in the forward direction. For f−1(5), the 5 is an output of f, so look for it in the output row of the table, or at height 5 on the y-axis of the graph. If you look for 5 in the input row, or at 5 on the x-axis, you find f(5), the answer to the forward question. Before you read anything, say the question aloud: 'f gave 5; what went in?'

Rule Restricting a domain so an inverse exists

A restricted domain is a smaller set of inputs than the full domain of a function.

If f fails the horizontal line test, choose a restricted domain on which f is one-to-one. On that piece f has an inverse function. The usual choice also keeps every output of f, so the inverse accepts all of them. For f(x)=x2 the usual restricted domain is x≥0, written [0,∞). The domain of f−1 is then the range of f, and the range of f−1 is the restricted domain.

Trap Restricting a domain so an inverse exists

The most common mistake is to restrict the domain on paper and then forget it. Once you keep x ≥ 0 for f(x) = x2, the inputs −1, −2, −3 and the rest are gone. So f−1(9) is 3 only. It is not "3 or −3", and it is not −3. To avoid the mistake, write the restricted domain beside the formula every time you write the function, and check that each answer from the inverse lies inside the restricted domain.

Rule Finding the inverse of a formula by swapping and solving

For a one-to-one function f: write y=f(x), swap x and y to get x=f(y), solve for y, and name the result f−1(x).

If solving produces ±, the domain of f picks the sign, because the outputs of f−1 are the inputs of f. The domain of f−1 is the range of f.

Trap Finding the inverse of a formula by swapping and solving

The most common mistake comes with the square root. After x = y2, people write y = x out of habit, or leave y = ±x as the answer. Neither is safe. Write ± first, then look at the condition on y that came from the domain of f, and keep the one sign that fits it. For x ≥ 0 that is x. For x ≤ 0 it is −x. Then test with a number from the domain of f: it must come back to itself.

8 Linear functions

crash course: about 12 min9 lessons13 questions to tryOpen the crash course

What it asks. You will describe one steady change in words, with a formula, in a table and on a graph. You will learn what the slope and the starting value say about that change. Then you will build an equation from points, a graph, a table or a real situation. Each method finishes with a check that puts the answer back into the information you were given.

Rule One steady change, four ways to show it

A linear function has form f(x)= mx +b, where fixed real numbers m and b give the constant rate m and input-zero output b.

Its graph lies on a straight nonvertical line. If m≠0, it is a polynomial of degree 1; if m=0, it is a constant function.

Trap One steady change, four ways to show it

Tip: Count the starting 250 once. Writing 333t would repeat the starting distance at every second.

Rule Read the starting amount and the amount per step

In f(x)= mx +b, slope m is output change per input unit and initial value b=f(0).

The y-intercept or vertical intercept is the point (0, b).

Trap Read the starting amount and the amount per step

Tip: At 33 feet, 14.322 PSI is the added pressure and 29.018 PSI is the total. Include the initial pressure when the question asks for pressure.

Rule Increasing, decreasing and constant lines

In f(x)= mx +b, m > 0 gives an increasing linear function, m < 0 gives a decreasing linear function, and m=0 gives a constant function with a horizontal line.

Trap Increasing, decreasing and constant lines

Tip: Classify by the input coefficient rather than the starting value. In 3x − 2, the positive three gives increasing behavior.

Rule Slope: output change divided by input change

m=riserun=y2−y1x2−x1=f(x2)−f(x1)x2−x1, where x2≠x1.

Units are output units per input unit.

Trap Slope: output change divided by input change

subtracting outputs in one order and inputs in the other reverses the sign. Use the same starting point for both differences.

Rule Anchor a line with a slope and a point

point-slope form is y−y1=m(x−x1).

Equivalently, y= mx +b with b=y1−mx1.

Trap Anchor a line with a slope and a point

y − 4 = 2(x − 1) switches the coordinates. The number beside y must be the output; the number beside x must be the input.

Rule Build the equation from two points

for distinct inputs, find m=y2−y1x2−x1, then b=y1−mx1.

Write y= mx +b or f(x)= mx +b.

Trap Build the equation from two points

taking the first listed output as b. It gives b only when that point's input is zero; otherwise recover b by substitution.

Rule Read a graph and choose a method

For a nonvertical line, m=y2−y1x2−x1, then y= mx +b.

Read b at x=0, or find b=y1−mx1 from a known point.

Trap Read a graph and choose a method

Treating the left edge of the displayed window as the y-axis. The y-axis is where x = 0, which may not be shown.

Rule Turn a real situation into a linear model

A constant-rate model has output = starting amount + rate × input.

Write f(x)= mx +b with units for m and b and a domain appropriate to the situation.

Trap Turn a real situation into a linear model

Using the first observed total as the initial value when its input is not zero. Remove its accumulated change to find the starting amount.

Rule Build and check a line from a table

With at least two distinct inputs and one output per input, compare outputchangeinputchange on every adjacent interval of increasing inputs.

Equal rates mean the listed points fit f(x)= mx +b. Read b under zero, or use b=y− mx.

Trap Build and check a line from a table

Looking only at the output differences when the input gaps change. Always divide by the actual input gap for that interval.

9 Graphs of linear functions

crash course: about 32 min10 lessons16 questions to tryOpen the crash course

What it asks. You will draw straight-line graphs three ways, then work backward from a graph to its equation. You will find axis crossings and distinguish horizontal and vertical lines. Next you will compare line directions and write parallel or perpendicular lines through a required point. Finally you will find shared points of two lines and use that idea to compare expenses with sales at break-even.

Rule Draw a line by plotting points

Graph a linear function by plotting at least two distinct coordinate pairs (x, f(x)) and drawing the entire straight line through them.

A third point checks the arithmetic.

Trap Draw a line by plotting points

Plotting (3, 3) as output first can hide the mistake because both numbers match. Practice with (0, 5): across 0, then up 5. The input always comes first.

Rule Start at the y-intercept and walk the slope

In y= mx +b, the y-intercept is (0, b) and m=riserun=y2−y1x2−x1, with x2≠x1.

Trap Start at the y-intercept and walk the slope

Reading −23 as down 3 and right 2. The top is rise, the bottom is run. Write the two movements beside the fraction before plotting.

Rule Build a line by changing the identity function

To transform y=x into y= mx +b, multiply outputs by m, including a reflection if m < 0, then shift outputs by b.

Stretch if |m| > 1; compress if 0 < |m| < 1.

Trap Build a line by changing the identity function

Doing the stated downward shift first and then halving the heights. That produces 12(x − 3) = 12x − 32, a different line.

Rule Read a graph and write its equation

Read b at (0, b), calculate m=y2−y1x2−x1, then write f(x)= mx +b.

If b is hidden, use b=y1−mx1.

Trap Read a graph and write its equation

Subtracting the output coordinates in one direction and the input coordinates in the opposite direction. Write arrows between the two points, then use that same direction for both differences.

Rule Find where the line reaches the x-axis

Set f(x)=0 to find x-intercepts.

For f(x)= mx +b with m≠0,x=−bm and the point is (−bm,0).

Trap Find where the line reaches the x-axis

Setting x = 0 to find the x-intercept. The axis name tells you which coordinate is allowed to vary: on the x-axis, x varies while y stays 0.

Rule Horizontal and vertical lines

A horizontal line has equation y=c and slope 0.

A vertical line has equation x=c, undefined slope, and is not a function of x.

Trap Horizontal and vertical lines

Writing y = 7 for the vertical line. Say what stays fixed before choosing the letter. Fixed across position means x; fixed height means y.

Rule Compare parallel and perpendicular lines

Nonvertical lines are parallel when m1=m2 and b1≠b2; coincident when both match.

Lines with finite nonzero slopes are perpendicular when m1m2=−1. Horizontal and vertical lines are perpendicular.

Trap Compare parallel and perpendicular lines

Changing only the sign or only flipping the fraction for a perpendicular slope. Both moves are needed, and the product must be −1.

Rule Write a parallel or perpendicular line through a point

Choose m equal to the given slope for a parallel line, or m=−1mgiven for a perpendicular line with nonzero finite given slope.

Through (x1,y1), use y−y1=m(x−x1).

Trap Write a parallel or perpendicular line through a point

Using the old slope in a perpendicular problem, or using the old intercept after changing the slope. Choose the direction first, then use the new point to find the new intercept.

Rule Find the point shared by two lines

A solution to a system satisfies every equation.

For y=f(x) and y=g(x), solve f(x)=g(x), find y, and check both. Two lines have one, no, or infinitely many shared points.

Trap Find the point shared by two lines

Finding the shared input and stopping. A point needs its output too. Also check both original equations; a point that fits only one is not a system solution.

Rule Use an intersection to find break-even

C(x)=F+ vx, R(x)= px, and profit P(x)=R(x)−C(x).

Break-even satisfies C(x)=R(x). For F > 0 and p > v, x=Fp−v.

Trap Use an intersection to find break-even

Confusing the shared revenue with profit. At break-even both cost and revenue can be large, but profit is their difference, which is 0.

10 Complex numbers

crash course: about 23 min6 lessons14 questions to tryOpen the crash course

What it asks. The big picture
Complex numbers extend real-number arithmetic using i2 = −1. You will learn to read, plot and calculate with numbers written as a + bi. Each lesson adds a skill you use in the next.

Rule The number i and the square root of a negative number

The imaginary unit i is the number with i2=−1, so i=−1.source 1

For any positive number a: −a=ia. Example: −16=i16=4i. Warning: a·b=ab is safe only when a and b are not both negative. When both are negative, write each root with i first, then multiply.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.1 Complex Numbers. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap The number i and the square root of a negative number

Multiplying under the roots before taking out i. −4 · −9 is not 36 = 6. Each root of a negative hides one i, so the product is 2i · 3i = 6i2 = −6. Whenever a negative sits under a square root, take the i out first, and only then multiply.

Rule A complex number as a point in a plane

Standard form: a+bi, where a and b are real numbers and i is the imaginary unit (i2=−1).source 1

Real part: a. Imaginary part: b, the number without the i. In the complex plane, a+bi is the point (a, b): a along the horizontal real axis, b along the vertical imaginary axis.source 1 Two complex numbers are equal only when their real parts are equal and their imaginary parts are equal.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.1 Complex Numbers. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap A complex number as a point in a plane

Calling the imaginary part bi instead of b. The imaginary part of 3 − 4i is −4, a plain real number with its sign. It is not −4i and it is not 4. Leave the i off and keep the minus sign.

Rule Adding and subtracting complex numbers

(a+bi)+(c+di)=(a+c)+(b+d)i(a+bi)−(c+di)=(a−c)+(b−d)i

Trap Adding and subtracting complex numbers

Changing only the first sign when you subtract. In (8 − 3i) − (2 − 7i), the minus sign outside reaches both terms inside: it makes −2 and it makes +7i. Writing 8 − 3i − 2 − 7i gives 6 − 10i, which is wrong. Before you combine anything, rewrite the line with both signs of the second number changed.

Rule Multiplying complex numbers

(a+bi)(c+di)=ac+ adi + bci +bdi2=(ac−bd)+(ad+bc)i, because i2=−1.

In words: multiply every term of the first number by every term of the second, replace i2 with −1, then collect the real numbers and collect the i terms.

Trap Multiplying complex numbers

The most common mistake is in the Last product. 2i · 4i is 8i2, and 8i2 is −8: a real number with the opposite sign. It is not 8, not 8i and not −8i. Say it each time you reach an i2: the sign flips and the i2 disappears. Then check that your final answer has no i2 left in it.

Rule The conjugate and dividing complex numbers

The complex conjugate of a+bi is a−bi.source 1

A number times its conjugate is real: (a+bi)(a−bi)=a2+b2. To divide (the bottom must not be 0), multiply top and bottom by the conjugate of the bottom: a+bic+di=(a+bi)(c−di)c2+d2.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.1 Complex Numbers. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap The conjugate and dividing complex numbers

Writing the bottom as a2 − b2. The product (3 + 2i)(3 − 2i) is 9 + 4 = 13, not 9 − 4 = 5. The last piece is −4i2, and i2 = −1 turns it into +4. To avoid the mistake, write the i2 piece out every time, and remember that the bottom is a sum of two squares, so it can never be negative and can never contain i.

Rule Powers of i repeat every four

i1=i,i2=−1,i3=−i,i4=1, and then the list repeats.

For any whole number n≥0, divide n by 4 and call the remainder r. Then in=ir: remainder 1 gives i, remainder 2 gives −1, remainder 3 gives −i, and remainder 0 gives 1.

Trap Powers of i repeat every four

Using the wrong number from the division. In 47 ÷ 4 = 11 remainder 3, the 11 only counts full groups of four, and each full group equals 1 and disappears. The answer comes from the remainder, 3, so i47 = i3 = −i. A second form of the same mistake: when the remainder is 0, the answer is 1, not 0. No power of i is ever 0.

11 Quadratic functions

crash course: about 27 min6 lessons14 questions to tryOpen the crash course

What it asks. The big picture: Quadratic functions connect formulas with curved graphs called parabolas. The vertex is the turning point that ties together the graph, its possible outputs and its largest or smallest value. You will read graphs and tables, rewrite formulas, find domain and range, solve area and revenue problems, and find intercepts or complex roots.

Rule The parabola and its parts

A quadratic function is f(x) = ax2 + bx + c, where a, b and c are numbers and a ≠ 0.

Its graph is a parabola.source 1
Vertex: the one turning point. If a > 0 the parabola opens up and the vertex is its lowest point; the y-coordinate of the vertex is the minimum value. If a < 0 it opens down and the vertex is its highest point; the y-coordinate of the vertex is the maximum value.
Axis of symmetry: the vertical line through the vertex. If the vertex is (h, k), the line is x = h.source 1
y-intercept: the one point of the graph with x=0. x-intercepts: the points of the graph with y=0. There are two, one or none.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.2 Quadratic Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap The parabola and its parts

Wrong: a maximum is the point (h, k). Right: the vertex is (h, k); the maximum is the height k.

Rule The vertex form f(x) = a(x − h)2 + k

Vertex form: f(x)=a(x−h)2+k, where a≠0.

The vertex is (h, k) and the axis of symmetry is x=h.source 1 If a > 0 the parabola opens up and the vertex is its lowest point. If a < 0 it opens down and the vertex is its highest point. If a is larger than 1 or smaller than −1 the parabola is narrower than y=x2. If a is between −1 and 1 it is wider.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.2 Quadratic Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap The vertex form f(x) = a(x − h)2 + k

Wrong: read the sign inside the bracket as h. Right: choose the x that makes the bracket zero.

Rule From general form to vertex form

General form: f(x)=ax2+bx+c, with a≠0.

Completing the square turns it into f(x)=a(x+b2a)2+c−b24a. So the vertex (h, k) has h=−b2a and k=f(h). The number a is the same in both forms.

Trap From general form to vertex form

Wrong: move the subtracted square outside unchanged. Right: multiply it by a as it leaves the bracket.

Rule Domain and range of a quadratic

For a quadratic function with vertex (h, k), written as f(x)=a(x−h)2+k or as f(x)=ax2+bx+c, with a≠0:
Domain: (−∞,∞), every real number.

If a > 0 (the parabola opens up): the range is [k, ∞), and k is the minimum value.
If a < 0 (the parabola opens down): the range is (−∞, k], and k is the maximum value.

Trap Domain and range of a quadratic

Wrong: start the range at h. Right: use the vertex height k and include it.

Rule Largest and smallest values in a word problem

For f(x)=ax2+bx+c, the vertex is at x=−b2a.

If a < 0, the parabola opens down and f has a maximum value, f(−b2a). If a > 0, the parabola opens up and f has a minimum value, f(−b2a). The two models used most: area of a rectangle = width × length, and revenue = price × number sold.

Trap Largest and smallest values in a word problem

Wrong: report only the vertex input. Right: give the requested dimensions or price and the largest or smallest amount, with units.

Rule The intercepts and what the discriminant says

For f(x)=ax2+bx+c with a≠0:
y-intercept: (0, c), because f(0)=c.

x-intercepts: the real solutions of ax2+bx+c=0, which are x=−b±b2−4ac2a, each written as a point (x, 0).
The discriminant D=b2−4ac counts them: D > 0 gives two x-intercepts, D=0 gives one (the vertex, sitting on the x-axis), D < 0 gives none.

Trap The intercepts and what the discriminant says

Wrong: square a negative coefficient without parentheses. Right: b2 squares the whole signed value; compute −4ac separately.

12 Power functions and polynomial functions

crash course: about 28 min6 lessons14 questions to tryOpen the crash course

What it asks. The big picture. Learn to read a polynomial formula and predict its graph. Start with a single power of x, then add powers together and read where the graph's two ends point, where it crosses the axes and where it turns. Use these skills to sort formulas, find where a graph crosses the axes and judge which graph shapes a formula can have.

Rule Power functions

A power function is f(x) = kxp, where k is a fixed number other than 0 and p is a fixed number.source 1

The graph families below use whole-number powers p (0, 1, 2, 3, ...). Polynomial vocabulary later compares these with negative and fractional powers.
For a whole-number p: if p is even, f(−x)=f(x): the inputs x and −x give the same output, and the graph mirrors across the y-axis. If p is odd, f(−x)=−f(x): x and −x give opposite outputs, and the graph looks the same after a half turn around (0, 0).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Power functions

Letting the power grab the number in front. In f(x) = −3x2 the power 2 belongs to x alone. At x = 2, square first, 22 = 4, then multiply by −3 to get −12. Squaring −3 · 2 = −6 gives 36, which is the output of a different function, (−3x)2. Put the input in, do the power, and only then multiply by k.

Rule End behavior of a power function

For f(x)=kxp with p=1, 2, 3, ...

and k≠0:
Right arm: k > 0 gives f(x)→∞ as x→∞; k < 0 gives f(x)→−∞ as x→∞.
Left arm: if p is even it matches the right arm; if p is odd it points the opposite way.

Trap End behavior of a power function

Reading −x4 as (−x)4. The power touches only x. The minus sign in front is k = −1 and is applied last. So −x4 has both arms down, while (−x)4 = x4 has both arms up. Before deciding anything, write k out with its sign: k = −1, k = −2, and so on.

Rule Polynomial vocabulary

A polynomial is a sum of terms a·xn: each coefficient a is a real number and each power n is a whole number (0, 1, 2, 3, ...).

Standard form lists the powers from highest to lowest: f(x) = anxn + ... + a2x2 + a1x + a0, with an ≠ 0; every polynomial except 0 itself can be written this way. The degree is n, the highest power. The leading term is anxn. The leading coefficient is an.source 1 The constant term is a0. The zero polynomial, 0, has no degree and no leading term.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Polynomial vocabulary

The most common mistake is to take the first term on the page as the leading term, or to take the biggest number as the leading coefficient. In 5 + 2x − 3x4 the leading term is −3x4, not 5, and the leading coefficient is −3, sign included. Always find the highest power first. The order on the page and the size of the numbers decide nothing.

Rule End behavior of a polynomial comes from its leading term

If f(x)=anxn+ (terms with lower powers of x), where an≠0 is the leading coefficient and the degree n is 1 or more, then f has the same end behavior as the power function y=anxn.source 1

n even, an>0: as x→−∞,f(x)→∞, and as x→∞,f(x)→∞ (both arms up).
n even, an<0: as x→−∞,f(x)→−∞, and as x→∞,f(x)→−∞ (both arms down).
n odd, an>0: as x→−∞,f(x)→−∞, and as x→∞,f(x)→∞ (left arm down, right arm up).
n odd, an<0: as x→−∞,f(x)→∞, and as x→∞,f(x)→−∞ (left arm up, right arm down).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap End behavior of a polynomial comes from its leading term

Taking the first term on the page as the leading term. In f(x) = 6 + 2x − x4 the first term is 6, but the leading term is −x4, the one with the highest power. Before reading any sign, scan every term for its power of x and circle the highest one. Then read the sign directly in front of that term, including a bare minus sign, which means −1.

Rule Intercepts of a polynomial

y-intercept: the point (0, f(0)).

When the polynomial is written term by term, f(0) is the constant term, the term with no x. x-intercepts: the points (c, 0) for every real number c with f(c)=0. Zero product property: if A·B=0, then A=0 or B=0.

Trap Intercepts of a polynomial

The most common mistake is reading the number inside a bracket with its sign unchanged. The factor (x + 3) does not give an intercept at 3. It gives −3, because −3 is the value that makes x + 3 equal 0. To avoid it, write the small equation x + 3 = 0 every time, solve it, and plug the answer back in. If the output is not 0, the sign is wrong.

Rule Turning points

A turning point is a point where the graph changes from rising to falling (a peak) or from falling to rising (a valley), read left to right.source 1

A polynomial of degree n, where n is 1 or more, has at most n−1 turning points.source 1
Backward: a polynomial that is not constant and whose graph has t turning points has degree at least t+1.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Turning points

Reading 'at most' as 'exactly'. A degree 3 polynomial does not have to have 2 turning points: y = x3 has none. A graph with 3 turning points does not have to come from degree 4: it could come from degree 6. Going from a formula of degree 1 or more, say 'at most n − 1 turning points'. Going from a graph that is not a flat line, say 'degree at least t + 1'.

13 Graphs of polynomial functions

crash course: about 29 min6 lessons14 questions to tryOpen the crash course

What it asks. The big picture. Connect polynomial formulas to the shapes of their graphs. Zeros, repeated factors and output signs explain where a curve meets the axis and which side it uses. Work from a formula to a sketch, then from graph features back to a formula. Finish by finding the largest and smallest outputs on an allowed interval.

Rule Zeros from the factored form

If f(x)=(x−c)· (other factors), then f(c)=0: c is a zero of f, and the graph meets the x-axis at the point (c, 0).

In factored form the zeros are exactly the inputs that make at least one factor 0, so x+c gives −c, a lone x gives 0, and a factor that is a nonzero number gives none.

Trap Zeros from the factored form

Wrong: copy the sign inside a factor. Right: solve the factor equal to zero, then substitute to check.

Rule Multiplicity and what the graph does at a zero

Let c be a zero of a polynomial f that is not the constant 0.

If the factor (x−c) appears exactly m times in the factored form of f(x), then c has multiplicity m.source 1 Odd m: the graph crosses the x-axis at x=c. Even m: the graph touches the x-axis at x=c and turns back.source 1 The larger m is, the flatter the graph lies near x=c.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.4 Graphs of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Multiplicity and what the graph does at a zero

Wrong: cross at every zero. Right: cross at odd multiplicity and touch at even multiplicity.

Rule The Intermediate Value Theorem

Intermediate Value Theorem, zero version: let f be a polynomial and let a < b.

If f(a) and f(b) have opposite signs, then there is at least one number c with a < c < b and f(c)=0.source 1 General version: f takes every value between f(a) and f(b) at some input between a and b.source 1

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.4 Graphs of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap The Intermediate Value Theorem

Wrong: matching endpoint signs mean no zero. Right: matching signs give no conclusion.

Rule Sketching a polynomial from its features

For a polynomial f that is not constant, written in factored form: the zeros cut the x-axis into intervals, and on each interval f(x) keeps one sign, the sign of f at any test point inside it.

At a zero of odd multiplicity the graph crosses the x-axis; at a zero of even multiplicity it touches and turns back. The y-intercept is (0, f(0)). The two arms follow the leading term.

Trap Sketching a polynomial from its features

Wrong: switch sides at every zero. Right: switch at odd multiplicity and keep the side at even multiplicity.

Rule Writing a formula from a graph

If all of a polynomial's zeros are real, at c1,c2, ...

with multiplicities m1,m2, ..., so the graph shows every one, then f(x)=a(x−c1)m1(x−c2)m2··· with a≠0.source 1 Lowest multiplicity that fits: a straight crossing is 1, a touch and turn is 2, a flattened crossing is 3. To find a, substitute one point (x0,y0) that is not on the x-axis and solve the equation for a.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.4 Graphs of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Writing a formula from a graph

Wrong: stop at the factors and assume the scale is one. Right: use a point off the x-axis to solve for the scale.

Rule Largest and smallest values on an interval

On a closed interval a≤x≤b, a polynomial always has a global maximum and a global minimum.source 1

Each one sits at a local maximum or local minimum inside the interval, or at an endpoint (x=a or x=b).source 1 The maximum or minimum is the output, the y-value. The place where it happens is the input, the x-value.

Sources (1)
  1. Gilbert Strang and Edwin Herman. Calculus Volume 1, 4.3 Maxima and Minima. OpenStax, 2016. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Largest and smallest values on an interval

Wrong: choose the highest hill and ignore the ends. Right: compare every hilltop and valley inside the interval with every included end.

14 Dividing polynomials

crash course: about 25 min5 lessons13 questions to tryOpen the crash course

What it asks. The big picture. Divide polynomials to find a quotient and a remainder. Multiply the divisor by the quotient and add the remainder to check your work. These lessons prepare you to divide by linear or quadratic expressions, write division results in two forms, and use division or a graph to find factors.

Rule Polynomial long division

Divide, multiply, subtract, bring down.

Write powers in descending order with zero placeholders. Stop only when every term is down and the remainder is zero or has lower degree than the divisor.

Trap Polynomial long division

Wrong: change only the first sign when subtracting a row. Right: change every sign, then add.

Rule Dividend = divisor times quotient plus remainder

The division algorithm: for a dividend P(x) and a divisor D(x) that is not 0, there is exactly one quotient Q(x) and exactly one remainder R(x) with P(x)=D(x)·Q(x)+R(x), where R(x) is 0 or has a lower degree than D(x).source 1

Dividing both sides by D(x) gives the fraction form: P(x)D(x)=Q(x)+R(x)D(x), wherever D(x)≠0.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.5 Dividing Polynomials. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Dividend = divisor times quotient plus remainder

Wrong: check with divisor × quotient alone. Right: add the remainder too, including its sign.

Rule Synthetic division by x − c

This short table works for a divisor of the form x−c.source 1

Write c in a box and the coefficients of the dividend in a row, in descending powers, with 0 for every missing power. Bring down the first coefficient. Then repeat: multiply the newest bottom number by c, write the product under the next coefficient, and add the column. The last bottom number is the remainder. The numbers before it are the coefficients of the quotient, whose degree is one less than the degree of the dividend when the dividend has degree 1 or more.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.5 Dividing Polynomials. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Synthetic division by x − c

Wrong: omit a missing power from the coefficient row. Right: write a zero in that place before starting.

Rule Dividing by a divisor of degree two

Use long division for a quadratic divisor.

Stop when all terms are down and the remainder is zero or has degree below two. The remainder may be mx +n, a constant or zero.

Trap Dividing by a divisor of degree two

Wrong: subtract only two terms of a three-term product. Right: change all three signs, then add.

Rule What a zero remainder means

If a division gives remainder 0, the divisor is a factor of the dividend, and dividend = divisor × quotient.

If the remainder is not 0, the divisor is not a factor. For a divisor x−c, with P(x) standing for the dividend and Q(x) for the quotient: remainder 0 means P(x)=(x−c)·Q(x).

Trap What a zero remainder means

Wrong: give only the factored quotient. Right: include the divisor too, so the product rebuilds the original polynomial.

15 Zeros of polynomial functions

crash course: about 35 min7 lessons15 questions to tryOpen the crash course

What it asks. The big picture: Find the inputs that make a polynomial equal zero, and build a polynomial from given zeros. A zero gives a factor; dividing out that factor reduces the problem. This unit builds on polynomial division and prepares you to factor the polynomials in rational functions.

Rule The Remainder Theorem

Remainder Theorem: if a polynomial f(x) is divided by x − c, the remainder is f(c).source 1

In symbols, for any number c: f(x)=(x−c)·q(x)+r, and r=f(c).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap The Remainder Theorem

Wrong: divide by x + 6 with c = 6. Right: set x + 6 = 0, so c = −6.

Rule The Factor Theorem

Factor Theorem.

For a polynomial f(x) and a number c: x−c is a factor of f(x) exactly when f(c)=0.source 1 When that happens, f(x)=(x−c)·q(x), where q(x) is the quotient from dividing f(x) by x−c.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap The Factor Theorem

Wrong: turn the zero c into x + c. Right: use x − c and substitute c to check.

Rule The Rational Zero Theorem

Let f(x)=anxn+ ...

+a1x+a0, where every coefficient is an integer, an≠0 and a0≠0. If pq is a rational zero of f written in lowest terms, then p is a factor of the constant term a0 and q is a factor of the leading coefficient an.source 1 So every rational zero is on the list ±factorofa0factorofan.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap The Rational Zero Theorem

Wrong: leading factors over constant factors. Right: constant factors over leading factors.

Rule Finding every zero, step by step

If c is a zero of f, then f(x)=(x−c)·q(x), and the zeros of f are c together with the zeros of the quotient q(x).

Take f with integer coefficients and a nonzero constant term (if the constant term is 0, factor out x and work with what is left). Every rational zero of a quotient is also a rational zero of f, so keep testing the same candidates ±factoroftheconstanttermfactoroftheleadingcoefficient of f on each quotient. When the quotient is a quadratic, the quadratic formula gives its last two zeros. If no candidate is a zero of a quotient of degree 3 or more, that quotient has no rational zero, and its zeros need another method.

Trap Finding every zero, step by step

Wrong: keep testing the original polynomial. Right: test the quotient and keep every zero already found.

Rule The Fundamental Theorem of Algebra and complex conjugate pairs

Fundamental Theorem of Algebra: every polynomial of degree n ≥ 1 has at least one zero among the complex numbers, so it has exactly n zeros counted with multiplicity; written as a product, f(x) = an(x − c1)(x − c2) ··· (x − cn), where an is the leading coefficient (the Linear Factorization Theorem).source 1

Complex conjugate pairs: if every coefficient of f is real and a + bi with b ≠ 0 is a zero, then its conjugate a − bi is also a zero.source 1

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap The Fundamental Theorem of Algebra and complex conjugate pairs

Wrong: count only distinct intercepts. Right: count real and nonreal zeros with multiplicity to the degree.

Rule Building a polynomial from its zeros

A polynomial of degree n whose zeros are exactly c1,c2, ..., cn, each listed as often as its multiplicity, has the form f(x)=a(x−c1)(x−c2) ...

(x−cn), where a is any nonzero number.source 1 With real coefficients, a complex conjugate pair p+ qi and p− qi contributes the factor (x−p)2+q2. A point (x0,y0) on the graph that is not a zero fixes a: solve y0=a(x0−c1)(x0−c2) ... (x0−cn).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Building a polynomial from its zeros

Wrong: assume the multiplier is one. Right: use the given point to find it.

Rule Descartes' Rule of Signs

Descartes' Rule of Signs.

Let f(x) be a polynomial with real coefficients, written from the highest power down, with missing terms skipped. (1) The number of positive real zeros equals the number of sign changes in f(x), or is less than that by an even number. (2) The number of negative real zeros equals the number of sign changes in f(−x), or is less than that by an even number.source 1 Zeros are counted with multiplicity, and a zero at x=0 belongs to neither group.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Trap Descartes' Rule of Signs

Wrong: call the sign-change count exact. Right: list that count, then 2 less, then 4 less, stopping at 0 or 1.

16 Rational functions

crash course: about 33 min7 lessons15 questions to tryOpen the crash course

What it asks. A rational function is a fraction with one polynomial on top and another on the bottom. You start with the simplest one, 1 ÷ x, and learn the arrow notation that describes a graph racing up beside a line or flattening out far away. Then you read each feature straight from the formula: the inputs the bottom forbids, the vertical asymptote or hole each forbidden input creates, the horizontal or slant line the graph settles toward when it has one, and the intercepts. Last, you put the features together into a sketch, and then run the process backward to write a formula from a graph.

Rule The reciprocal function and arrow notation

The reciprocal function is f(x)=1x.

Its domain and its range are both (−∞,0)∪(0,∞): every real number except 0. Near zero: as x→0+,f(x)→∞, and as x→0−,f(x)→−∞. Far away: as x→∞,f(x)→0, and as x→−∞,f(x)→0. In arrow notation the arrow reads "approaches" or "goes to", a raised + means from the right, and a raised − means from the left.

Trap The reciprocal function and arrow notation

The most common mistake is running the two behaviors together: thinking a small input gives a small output, or writing "as x → 0, f(x) → 0". It is the reverse. Inputs near 0 give outputs far from 0, and inputs far from 0 give outputs near 0. Before you write any arrow statement, plug in one test number, such as 0.01 or 1000, and look at both the size and the sign of the answer.

Rule The domain of a rational function

A rational function has the form f(x)=P(x)Q(x), where P(x) and Q(x) are polynomials and Q(x) is not the zero polynomial.

Domain of f: every real number x with Q(x)≠0. Solve Q(x)=0 on the original formula, before any canceling, and leave out each solution.

Trap The domain of a rational function

Canceling before you find the domain. f(x) = x2−1x−1 factors to (x−1)(x+1)x−1 and cancels to x + 1, which looks as if it accepts every number. But the original formula at x = 1 is 0 ÷ 0, which has no answer. The domain is still (−∞, 1) ∪ (1, ∞). Always solve bottom = 0 on the formula as it was given, and simplify only after that.

Rule Vertical asymptotes and holes

Factor the top and the bottom and cancel every common factor.

If x = a still makes the bottom zero after canceling, the line x = a is a vertical asymptote. If x = a makes the original bottom zero but no longer makes the simplified bottom zero, the graph has a hole (a removable discontinuity) at x = a, and the height of the hole is the value of the simplified formula at a.

Trap Vertical asymptotes and holes

The most common mistake is to stop at the domain: you find the zeros of the bottom and call every one of them a vertical asymptote. Some of them may be holes. Always factor and cancel first, then sort each excluded input by whether it still makes the simplified bottom zero. Still zero means a wall. No longer zero means a hole, with its height taken from the simplified formula.

Rule Horizontal and slant asymptotes

For a top that is not the constant 0, compare the degree of the top with the degree of the bottom.

Top degree < bottom degree: horizontal asymptote y=0. Degrees equal: horizontal asymptote y=leadingcoefficientofthetopleadingcoefficientofthebottom. Top degree = bottom degree +1: no horizontal asymptote, and the slant asymptote is y= the quotient of top ÷ bottom with the remainder dropped. Top degree bigger by 2 or more: neither.

Trap Horizontal and slant asymptotes

Dividing the leading coefficients without first comparing the degrees. The ratio of leading coefficients is the horizontal asymptote only when the two degrees are equal. For 3x+1x2−4 the tempting answer y = 3 is wrong: the bottom is stronger, so the answer is y = 0. Write the two degrees down before you touch the coefficients.

Rule Intercepts of a rational function

Let f(x)=p(x)q(x) be a rational function, where p(x) is the top and q(x) is the bottom.

y-intercept: the point (0, f(0)), when q(0) ≠ 0. When q(0) = 0 there is no y-intercept.
x-intercepts: every point (a, 0) where p(a) = 0 and q(a) ≠ 0. A zero of the top that also makes the bottom 0 is never an x-intercept.

Trap Intercepts of a rational function

Keeping a zero of the top that also makes the bottom zero. For f(x) = x2−1x−1, the top is 0 at x = 1 and at x = −1. But x = 1 makes the bottom 0 too, so f(1) is 0 ÷ 0, which is undefined. The graph has a hole at (1, 2) there, and the only x-intercept is (−1, 0). Test every candidate in the original bottom before you call it an intercept.

Rule Graphing a rational function from its features

For a top that is not the constant 0, split the x-axis at every x-intercept, every vertical asymptote and every hole.

On each interval between neighboring split points, f(x) keeps one sign, so one test point tells whether the graph is above or below the x-axis there. The sketch is: dashed asymptotes, plotted intercepts, an open circle at each hole, one test point per interval, then smooth branches that never cross a vertical asymptote and, at the far left and far right, level toward the horizontal asymptote or slant asymptote. When the top's degree is two or more above the bottom's, there is neither, and the far ends follow the polynomial quotient that division gives.

Trap Graphing a rational function from its features

The most common mistake is to plot a handful of points and join them all in one stroke, straight through a vertical asymptote. The function has no output at a vertical asymptote, so no part of the curve may pass through that dashed line. Draw every asymptote first, lift the pencil at each vertical one, and let the test point on each side decide whether that side climbs or dives.

Rule Writing a rational function from its graph

The first candidate formula, with the simplest factors, for a graph that crosses the x-axis at x=p and x=q, has vertical asymptotes at x=r and x=s, and has a hole at x=c is f(x)=a·(x−p)(x−q)(x−c)(x−r)(x−s)(x−c) with a≠0.

With no hole, leave out both (x−c) factors. Find a by plugging in one more point of the graph that is not on the x-axis. If the graph goes the same way on both sides of a vertical asymptote, square that bottom factor, the simplest even power. If the graph touches the x-axis at an intercept and turns back, square that top factor. Check the candidate against the rest of the graph: a graph can call for higher powers or for factors with no real zero, such as x2+1.

Trap Writing a rational function from its graph

Stopping after the factors. x−1x+2 has the right crossing and the right wall, but its graph passes through (0, −12) and levels off at y = 1. The graph in the example passes through (0, −1) and levels off at y = 2. Always write a in front and use a point to find it, even when a turns out to be 1.

17 Inverses and radical functions

crash course: about 21 min6 lessons14 questions to tryOpen the crash course

What it asks. An inverse function runs a function backward: it takes an output and hands back the input that produced it. That works only for a one-to-one function, where every output comes from one input, and the horizontal line test tells you whether a graph qualifies. A parabola fails the test, so you give it a restricted domain by cutting at the vertex, and the inverse of the half you keep is a square root function. You also find the inverse of a cubic a(x − h)3 + k, which needs no cut, the inverse of a fraction with x on the top and the bottom, and the domain of a radical function. The unit ends by checking that a function and its inverse undo each other in both orders and that their graphs are mirror images across the line y = x.

Rule Why a quadratic needs its domain cut to have an inverse

A quadratic f(x)=a(x−h)2+k, with a≠0, has its vertex at (h, k).

On all real numbers it is not a one-to-one function, so it has no inverse function. On the restricted domain x≥h (the right half) or x≤h (the left half) it is a one-to-one function, so it has an inverse function. The range does not change: y≥k when a > 0, and y≤k when a < 0.

Trap Why a quadratic needs its domain cut to have an inverse

Cutting at x = 0 out of habit. That works only when the vertex sits on the y-axis, as in x2 or x2 + 5. For (x − 4)2, the inputs 3 and 5 are both positive and both give 1, so x ≥ 0 fixes nothing. Find the vertex first, every time, and cut at its x value h.

Rule Finding the inverse of a quadratic on a cut domain

For f(x)=a(x−h)2+k on the restricted domain x≥h, the inverse function is f−1(x)=h+(x−k)÷a.

On the restricted domain x≤h it is f−1(x)=h−(x−k)÷a. The domain of f−1 is the range of f, and the range of f−1 is the restricted domain of f.

Trap Finding the inverse of a quadratic on a cut domain

Writing the plus root out of habit. The root step always produces ±, and the plus sign is right only when the right half of the parabola was kept. When the restricted domain is x ≤ h, the answer needs the minus sign. To avoid the mistake, carry the domain note through the swap, read it before you choose the sign, and test one number that is not the vertex.

Rule Inverses of other polynomials

A cubic of the form f(x)=a(x−h)3+k, with a≠0, is a one-to-one function on all real numbers, so it has an inverse function with no restricted domain.

To find it: write y=f(x), swap x and y, and solve for y, using a cube root to undo the cube. A cube root has one value and takes no ± sign. The result is f−1(x)=(x−ka)3+h, with domain (−∞,∞) and range (−∞,∞).

Trap Inverses of other polynomials

The most common mistake is carrying square root habits into cube roots: writing ± in front of the cube root, or cutting the domain as if the cubic were a parabola. A cube root has one value. 83 is 2 only, because (−2)3 is −8 and not 8. Before writing ±, ask whether the power being undone is even or odd. Only an even power loses the sign.

Rule Radical functions and their domains

Square root (and every even root): f(x)=ax+b gives a real number only when ax+b≥0.

Solve that inequality. Its solution is the domain.
Cube root (and every odd root): g(x)=(ax+b)3 gives a real number for every x. Its domain is (−∞,∞).

Trap Radical functions and their domains

Writing x ≥ 0 out of habit. The condition belongs to the whole inside, not to x alone. For f(x) = 2x+6, the answer x ≥ 0 throws away every input from −3 up to, but not including, 0, and those inputs work: x = −1 gives 4 = 2. To avoid it, copy everything under the root sign first, write ≥ 0 after it, and only then solve.

Rule Inverses of rational functions

For f(x)=ax+bcx+d with c≠0 and ad−bc≠0, swap and solve gives f−1(x)=−dx+bcx−a.

Domain of f: x≠−dc. Range of f: y≠ac. Domain of f−1= range of f. Range of f−1= domain of f.

Trap Inverses of rational functions

After the fraction is cleared, y sits in two terms on opposite sides, as in xy − 3x = 2y + 1. The common mistake is to divide right away and write y = 2y+3x+1x. That is not solved, because y is still on the right. Gather every y term on one side first, factor y out, and only then divide.

Rule A function and its inverse undo each other

Two functions f and g are inverses of each other exactly when g(f(x))=x for every x in the domain of f, and f(g(x))=x for every x in the domain of g.

Then g=f−1, the domain of g is the range of f, the range of g is the domain of f, and the point (a, b) is on the graph of f exactly when (b, a) is on the graph of g. The two graphs are mirror images across the line y=x.

Trap A function and its inverse undo each other

Checking one order only, or dropping the domain. With f(x) = x2 on all real numbers and g(x) = x, the order f(g(x)) = (x)2 = x works, yet g(f(−3)) = 9 = 3, not −3. Always work both orders, write x2 as |x|, and write the domain beside each result.