Quarry School

The Remainder Theorem

Subject: MathematicsLeans on: Evaluating a functionLeans on: Reading c from the divisorLeans on: Synthetic divisionLeans on: Placeholder zerosLeans on: Adding signed numbersLeans on: Multiplying signed numbersLeans on: Powers of a negative numberLeans on: Order of operationsLeans on: Checking a divisionLeans on: Multiplying by a fractionLeans on: Solving a linear equation
Level 1 · FoundationsAbout 20 min read3 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Leans on

    Quick review (2 minutes)

    In plain words

    The big picture: Find a polynomial’s output by reading a division remainder.

    Rule

    Remainder Theorem: if a polynomial f(x) is divided by x − c, the remainder is f(c).
    In symbols, for any number c: f(x) = (x − c) · q(x) + r, and r = f(c).

    Step

    1. For f(x) = 2x3 − 5x2 + x − 4, find f(3). By the Remainder Theorem, use the divisor x − 3 and c = 3: the output equals the remainder.

    2. Write 2, −5, 1, −4 in descending powers. Synthetic division needs a place for every power so the columns line up; here none is missing.

    3. Bring down 2. Follow the synthetic division rule, multiply by 3 then add: −5 + 6 = 1, then 1 + 3 = 4, then −4 + 12 = 8. Each new bottom entry supplies the next multiplication.

    4. Read the last entry as the remainder. The Remainder Theorem gives f(3) = 8; the other entries give the quotient 2x2 + x + 4.

    5. Check by substitution into the original: 2·33 − 5·32 + 3 − 4 = 54 − 45 + 3 − 4 = 8. Substitution and division must agree because both compute f(3).

    Strategy

    1. Set the divisor equal to zero to find c. For a value f(c), use that input.

    2. Write the coefficients in descending order. Put zero in every missing place.

    3. Bring down the first coefficient. Multiply by c, then add to the next coefficient. Repeat.

    4. Read the last bottom number as both the remainder and f(c).

    5. Check by substituting c into the original polynomial.

    Question

    Let f(x) = 2x3 − 5x2 + x − 4. Use synthetic division and the Remainder Theorem to find f(3).

    Answer

    The remainder is 8.
    f(3) = 8.

    Trap

    Wrong: divide by x + 6 with c = 6. Right: set x + 6 = 0, so c = −6.

    Strategy

    1. Set the divisor equal to zero to find c.

    2. Substitute c into the polynomial, keeping the unknown coefficient as a letter.

    3. Set that expression equal to the stated remainder and solve for the letter.

    4. Put the coefficient back into the polynomial and check the remainder.

    Term

    Remainder Theorem

    Definition

    When you divide a polynomial f(x) by x − c, the remainder equals f(c), the value you get by plugging c into f.

    Term

    Factor Theorem

    Definition

    x − c is a factor of f(x) exactly when f(c) = 0. Finding a zero and finding a factor are the same discovery.

    1 In plain words

    The big picture: Find a polynomial’s output by reading a division remainder. The input that makes the divisor zero gives that remainder. This builds on polynomial division and leads to the Factor Theorem’s test for a factor.

    A remainder is the leftover after division, like eggs left after filling cartons. Dividing a polynomial f(x) by x − c leaves the number f(c). You can get it by substituting c or by running synthetic division and reading the last bottom entry.

    2 Picture it

    (−1, −6)(0, 1)(1, 2)(2, 3)(3, 10)2−8−44812(−1, −6)(0, 1)(1, 2)(2, 3)(3, 10)−1123−8−44812
    Each remainder from dividing f(x) = x3 − 3x2 + 3x + 1 by x − c is the height of its graph at x = c.

    Reminder

    Reminder: Evaluating a function, Reading c from the divisor, Synthetic division, Placeholder zeros, Adding signed numbers, Multiplying signed numbers, Powers of a negative number, Order of operations, Checking a division, Multiplying by a fraction, Solving a linear equation
    • Evaluating a function. f(c) means put c in place of every x: for f(x) = x2 + 1, f(3) = 32 + 1 = 9 + 1 = 10.
    • Reading c from the divisor. Set the divisor equal to 0: x − 6 = 0 gives c = 6, and x + 6 = 0 gives c = −6 (check: −6 + 6 = 0).
    • Synthetic division. Bring down the first coefficient, then multiply the newest bottom number by c and add it to the next coefficient: for x2 + 5x + 2 and c = 1, the bottom row is 1, then 1 · 1 + 5 = 6, then 6 · 1 + 2 = 8.
    • Placeholder zeros. Every power from the highest down to the constant needs its own column: x3 − 7 has the coefficients 1, 0, 0, −7.
    • Adding signed numbers. Start at the first number and walk: −5 + 6 = 1 walks right; 3 + (−4) = −1 walks left.
    • Multiplying signed numbers. Two negatives make a positive; a negative and a positive make a negative: (−1) · (−2) = 2 and 4 · (−2) = −8.
    • Powers of a negative number. An even power of a negative number is positive, an odd power is negative: (−2)2 = 4 and (−2)3 = −8.
    • Order of operations. Do powers before multiplying: 5 · 32 = 5 · 9 = 45, not 152 = 225.
    • Checking a division. Divisor times quotient plus remainder gives back what you divided: 23 ÷ 6 is 3 remainder 5, and 6 · 3 + 5 = 23.
    • Multiplying by a fraction. A whole number times 12 is half of it, 6 · 12 = 3; and (12)3 = 18, because 1 · 1 · 1 = 1 and 2 · 2 · 2 = 8.
    • Solving a linear equation. Undo the adding, then the multiplying: 4k + 1 = 9 becomes 4k = 8, then k = 2.

    3 Why

    Division means f(x) = (x − c)q(x) + r. Put c in for x. The product becomes zero because c − c = 0, leaving f(c) = r. This proves why substitution and the last entry of synthetic division agree.

    4 The rule

    Remainder Theorem: if a polynomial f(x) is divided by x − c, the remainder is f(c).source 1

    In symbols, for any number c: f(x)=(x−c)·q(x)+r, and r=f(c).

    Sources (1)
    1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

    The same idea, five ways

    Say it

    The remainder when f of x is divided by x minus c is f of c.

    Write it

    If a polynomial f(x) is divided by x − c, then the remainder equals f(c), the output of f at the input c.

    In math
    • f(x) = (x − c) · q(x) + r, with r = f(c)
    • f(x)x−c = q(x) + f(c)x−c, for x ≠ c
    • the last number in the bottom row of the table for c = f(c)
    • graph words: the remainder is the height of y = f(x) above x = c
    Like

    Two roads to one town: plugging c in climbs over every power, the synthetic division table takes the flat road of multiplying and adding, and both arrive at f(c).

    See it
    c = 2divide x³ − 3x² + 3x+ 1 by x − 2 andkeep the remainderinputoutput3, which is f(2)
    Put c in, divide by x − c, and the leftover that comes out is the output f(c).

    The same idea, other ways

    As a story

    You pack 23 eggs into cartons of 6: 3 full cartons and 5 eggs left over, and 6 · 3 + 5 = 23 puts every egg back. Dividing f(x) by x − c packs the polynomial the same way: f(x) = (x − c) · q(x) + r, with r the leftover. The Remainder Theorem says this leftover is no random scrap: it is exactly the output f(c).

    23 ÷ 6 = 3, remainder 5

    check: 6 · 3 + 5 = 23

    f(x) ÷ (x − c) = q(x), remainder r

    check: f(x) = (x − c) · q(x) + r

    the leftover r is f(c)

    As a table of values

    Divide f(x) = x3 − 3x2 + 3x + 1 by x − c five times, once for each c in the picture, and write each remainder under its c. Now compare with plugging in. The column under 2 holds 3, and f(2) = 8 − 12 + 6 + 1 = 3. The column under −1 holds −6, and f(−1) = −1 − 3 − 3 + 1 = −6. The remainders are the outputs of f, the same heights the graph beside this lesson shows.

    input coutput remainder−1−6011223310↓ evaluate: input given, read the output below it
    Under each c sits the remainder from dividing x3 − 3x2 + 3x + 1 by x − c.
    Why it must be true

    The line f(x) = (x − c) · q(x) + r holds for every x, so it holds at x = c. There the divisor becomes c − c = 0, and 0 times q(c) is 0 no matter what q(c) is. The whole first piece vanishes and only the remainder is left: f(c) = r. That is why the theorem divides by x − c: it is a divisor that turns into 0 at the input c.

    f(x)=(x−c)·q(x)+r

    put in x = c:

    f(c)=(c−c)·q(c)+r

    f(c) = 0 · q(c) + r

    f(c) = r

    With numbers: the table is plugging in

    Pull x out again and again: 2x3 − 5x2 + x − 4 = ((2x − 5)x + 1)x − 4. Multiply back to see it is the same polynomial: (2x − 5) · x = 2x2 − 5x, and (2x2 − 5x + 1) · x = 2x3 − 5x2 + x. Now put in x = 3 and work from the inside out: 2 · 3 − 5 = 1, then 1 · 3 + 1 = 4, then 4 · 3 − 4 = 8. After the leading 2, those are the numbers 1, 4, 8 in the bottom row of the synthetic division table for c = 3. The table is plugging in, done with one multiplication and one addition per column.

    2x3−5x2+x−4=((2x−5)x+1)x−4

    at x = 3, from the inside out:

    2·3−5=1

    1 · 3 + 1 = 4

    4·3−4=8

    table bottom row: 2, 1, 4, 8

    As a rule of thumb

    Divide by x − c, and the last number down is f(c). Two habits keep the rule honest: find c by setting the divisor equal to 0, so x + 4 means c = −4, and give every missing power a 0 before you start.

    DivisorSet it equal to 0cThe remainder equals
    x−4x − 4 = 0 gives x = 44f(4)
    x + 4x + 4 = 0 gives x = −4−4f(−4)
    x−10x − 10 = 0 gives x = 1010f(10)
    x + 1x + 1 = 0 gives x = −1−1f(−1)
    xx = 0, since x is x − 00f(0)
    x−12x − 12 = 0 gives x = 1212f(12)

    Part 1: A missing coefficient from a remainder

    Here the remainder is given and one coefficient is a letter. Substitute c, set the result equal to the remainder, and solve for the letter. The last practice rung works one through.

    What it asks: Find a missing coefficient from a remainder.

    1. Set the divisor equal to zero to find c.
    2. Substitute c into the polynomial, keeping the unknown coefficient as a letter.
    3. Set that expression equal to the stated remainder and solve for the letter.
    4. Put the coefficient back into the polynomial and check the remainder.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Set the value equal to zero for every remainder question.
    A remainder can be nonzero.
    ✓ Instead: Set f(c) equal to the stated remainder.

    Tips and tricks

    • Trick: substitution gives one equation directly; a full division table is optional.

    5 How

    1. For f(x) = 2x3 − 5x2 + x − 4, find f(3). By the Remainder Theorem, use the divisor x − 3 and c = 3: the output equals the remainder.
    2. Write 2, −5, 1, −4 in descending powers. Synthetic division needs a place for every power so the columns line up; here none is missing.
    3. Bring down 2. Follow the synthetic division rule, multiply by 3 then add: −5 + 6 = 1, then 1 + 3 = 4, then −4 + 12 = 8. Each new bottom entry supplies the next multiplication.
    4. Read the last entry as the remainder. The Remainder Theorem gives f(3) = 8; the other entries give the quotient 2x2 + x + 4.
    5. Check by substitution into the original: 2·33 − 5·32 + 3 − 4 = 54 − 45 + 3 − 4 = 8. Substitution and division must agree because both compute f(3).

    What it asks: Find a function value or a remainder.

    1
    Is a coefficient unknown?
    YesSet f(c) equal to the given remainder.
    NoEvaluate f(c) with substitution or synthetic division.
    1. Set the divisor equal to zero to find c. For a value f(c), use that input.
    2. Write the coefficients in descending order. Put zero in every missing place.
    3. Bring down the first coefficient. Multiply by c, then add to the next coefficient. Repeat.
    4. Read the last bottom number as both the remainder and f(c).
    5. Check by substituting c into the original polynomial.

    6 Worked example

    Worked example

    Finding f(3) with the table

    Let f(x) = 2x3 − 5x2 + x − 4. Use synthetic division and the Remainder Theorem to find f(3).

    What it asks. Find a function value or a remainder.

    Show the steps and the answer

    The plan. Find c, run the multiply-and-add row, then check by substitution.

    divide 2x3 − 5x2 + x − 4 by x − 3: c = 3

    top row: 2, −5, 1, −4

    products (bottom number · 3): 6, 3, 12

    bottom row: 2, 1, 4, 8

    remainder: 8 = f(3)

    1. Plan. Find c, run the multiply-and-add row, then check by substitution.
    1. Say what the question asks: the input is 3, so find the output f(3). The Remainder Theorem lets us get it as the remainder when f(x) is divided by x−3.f(3) and that remainder are the same number, so we may take the table road instead of cubing 3.
    2. Find c: set the divisor equal to 0. x−3=0 gives x=3, so c=3. Plug back: 3−3=0.This finds the one input that makes the divisor zero, and that input is the number the table runs on.
    3. Write the coefficients from the highest power down: 2, −5, 1, −4.Every power from x3 down to the constant is present, so no 0 is needed. The x term has an invisible 1 in front, and −5 and −4 keep their minus signs.
    4. Bring down the 2.The first bottom number is always the leading coefficient; nothing has been added to it yet.
    5. Multiply 2 · 3 = 6, write 6 under −5, and add: −5+6=1.Each round multiplies the newest bottom number by c and adds the product to the next coefficient.
    6. Multiply 1 · 3 = 3, write 3 under 1, and add: 1+3=4.The same round, one column to the right.
    7. Multiply 4 · 3 = 12, write 12 under −4, and add: −4+12=8.This last column holds the constant term, so its sum is the leftover of the whole division.
    8. Read the bottom row: 2, 1, 4, 8. The remainder is 8, so f(3)=8.The Remainder Theorem says the remainder from dividing by x − 3 is f(3). The numbers before it, 2, 1, 4, are the quotient 2x2 + x + 4.
    Answer
    • The remainder is 8.
    • f(3) = 8.
    Double-check Plug 3 in directly: 2 · 33 − 5 · 32 + 3 − 4 = 2 · 27 − 5 · 9 + 3 − 4 = 54 − 45 + 3 − 4 = 8. Both roads give 8. Multiplying back agrees too: (x − 3)(2x2 + x + 4) + 8 = 2x3 − 5x2 + x − 4.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 6

    A quadratic and c = 1

    Find the remainder when f(x) = x2 + 4x − 3 is divided by x − 1.

    What it asks. Find a function value or a remainder.

    Show the steps and the answer

    The plan. Find c, run the multiply-and-add row, then check by substitution.

    (1, 2)−6−4−22−8−448
    The graph of f(x) = x2 + 4x − 3 is 2 high at x = 1, the same 2 the table leaves over.
    1. Plan. Find c, run the multiply-and-add row, then check by substitution.
    1. Say what it asks: divide by x−1 and find the number left over. By the Remainder Theorem, that number is also f(1).Naming the target first tells you which c to use and what the last bottom number will mean.
    2. Find c: x−1=0 gives x=1, so c=1. Plug back: 1−1=0.The table runs on the input that makes the divisor zero.
    3. Write the coefficients 1, 4, −3.x2 has an invisible 1 in front, 4x gives 4, and the constant −3 keeps its sign.
    4. Bring down 1. Multiply 1 · 1 = 1 and add to 4: 4+1=5.Each round multiplies the newest bottom number by c and adds the product to the next coefficient.
    5. Multiply 5 · 1 = 5 and add to −3: −3+5=2.The last column holds the constant, so this sum is the remainder.
    6. The bottom row is 1, 5, 2, so the remainder is 2.Only the last number is the remainder; 1 and 5 are the quotient x + 5.
    Answer
    • The remainder is 2.
    • So f(1) = 2.
    Double-check Plug in 1: 12 + 4 · 1 − 3 = 1 + 4 − 3 = 2. Same number. Since every power of 1 is 1, f(1) is the sum of the coefficients, 1 + 4 − 3 = 2, a check that works for any polynomial.

    Rung 2 of 6

    A plus sign in the divisor (gotcha: c is negative)

    Find the remainder when f(x) = x3 + 2x2 − x + 5 is divided by x + 2. Which value of f is it?

    What it asks. Find a function value or a remainder.

    Show the steps and the answer

    The plan. Find c, run the multiply-and-add row, then check by substitution.

    −4−202+2lands on 0
    Start at −2 and add 2: you land on 0, so x = −2 is the input that makes x + 2 zero.
    1. Plan. Find c, run the multiply-and-add row, then check by substitution.
    1. Say what it asks: divide by x+2, find the number left over, and name the input of f that gives the same number.The Remainder Theorem says this remainder is a value of f; part of the job is finding at which input.
    2. Find c: set x+2=0, so x=−2 and c=−2. Plug back: −2+2=0.x + 2 is the same as x − (−2). This step finds the input that makes the divisor zero; using 2 instead would compute f(2), a different number.
    3. Write the coefficients 1, 2, −1, 5.x3 has an invisible 1, the term −x has coefficient −1, and every power from x3 down to the constant is present.
    4. Bring down 1. Multiply 1 · (−2) = −2 and add to 2: 2+(−2)=0.Multiply the newest bottom number by c, then add the product to the next coefficient.
    5. Multiply 0 · (−2) = 0 and add to −1: −1+0=−1.A 0 in the bottom row is allowed; zero times anything is zero, so this column passes −1 straight down.
    6. Multiply −1 · (−2) = 2 and add to 5: 5+2=7.A negative times a negative is positive.
    7. The bottom row is 1, 0, −1, 7. The remainder is 7, and it equals f(−2).The last bottom number is the remainder, and the theorem says it is f(c) with c = −2.
    Answer
    • The remainder is 7.
    • It is f(−2), so f(−2) = 7.
    Double-check Plug in −2: (−2)3 + 2 · (−2)2 − (−2) + 5 = −8 + 2 · 4 + 2 + 5 = −8 + 8 + 2 + 5 = 7. Same number.

    Rung 3 of 6

    Missing powers (gotcha: write a 0 for each one)

    Let f(x) = x4 − 5x2 + 3. Use synthetic division to find f(2).

    What it asks. Find a function value or a remainder.

    Show the steps and the answer

    The plan. Find c, run the multiply-and-add row, then check by substitution.

    f(x)=x4−5x2+3

    powers: x4, x3, x2, x, constant

    coefficients: 1, 0, −5, 0, 3

    bottom row for c = 2: 1, 2, −1, −2, −1

    1. Plan. Find c, run the multiply-and-add row, then check by substitution.
    1. Say what it asks: the input is 2, so find the output f(2). By the Remainder Theorem it is the remainder when f(x) is divided by x−2.The question names f(2), so the divisor to use is x − 2.
    2. c=2: x−2=0 gives x=2. Plug back: 2−2=0.The table runs on the input that makes the divisor zero.
    3. Write the coefficients with placeholders: 1, 0, −5, 0, 3.The powers run x4, x3, x2, x, constant. There is no x3 term and no x term, so each gets a 0. Without them, −5 would land in the x3 column and the table would work on a different polynomial.
    4. Bring down 1. Multiply 1 · 2 = 2 and add to 0: 0+2=2.A placeholder 0 takes part like any other coefficient.
    5. Multiply 2 · 2 = 4 and add to −5: −5+4=−1.Newest bottom number times c, added to the next coefficient.
    6. Multiply −1 · 2 = −2 and add to 0: 0+(−2)=−2.A negative times a positive is negative.
    7. Multiply −2 · 2 = −4 and add to 3: 3+(−4)=−1.This last column holds the constant, so this sum is the remainder.
    8. The bottom row is 1, 2, −1,−2,−1. The remainder is −1, so f(2)=−1.A remainder here can be negative: it is an output of f, and outputs can be any number.
    Answer
    f(2)=−1.
    Double-check Plug in 2: 24 − 5 · 22 + 3 = 16 − 5 · 4 + 3 = 16 − 20 + 3 = −1. Same number.

    Rung 4 of 6

    A big input, where the table saves work

    Let f(x) = x4 − 6x3 + 7x2 + 5x − 20. Find f(5).

    What it asks. Find a function value or a remainder.

    Show the steps and the answer

    The plan. Find c, run the multiply-and-add row, then check by substitution.

    plugging in: 54 = 625, 53 = 125, 52 = 25

    625−750+175+25−20=55

    table products: 5, −5, 10, 75

    bottom row: 1, −1, 2, 15, 55

    1. Plan. Find c, run the multiply-and-add row, then check by substitution.
    1. Say what it asks: the input is 5, so find the output f(5).Plugging in would mean working out 54 = 625 and 53 = 125. The Remainder Theorem lets us divide by x − 5 instead, and the table only multiplies by 5 and adds.
    2. c=5, since x−5=0 gives x=5. The coefficients are 1, −6, 7, 5, −20.Every power from x4 down to the constant is present, so no 0 is needed.
    3. Bring down 1. Multiply 1 · 5 = 5 and add to −6: −6+5=−1.Newest bottom number times c, added to the next coefficient.
    4. Multiply −1 · 5 = −5 and add to 7: 7+(−5)=2.A negative times a positive is negative.
    5. Multiply 2 · 5 = 10 and add to 5: 5+10=15.The same round, next column.
    6. Multiply 15 · 5 = 75 and add to −20: −20+75=55.This last column holds the constant, so this sum is the remainder.
    7. The bottom row is 1, −1, 2, 15, 55. The remainder is 55, so f(5)=55.By the Remainder Theorem the remainder from dividing by x − 5 is f(5).
    Answer
    f(5) = 55.
    Double-check Plug in 5: 54 − 6 · 53 + 7 · 52 + 5 · 5 − 20 = 625 − 750 + 175 + 25 − 20 = 55. Same number, by way of much bigger arithmetic.

    Rung 5 of 6

    A fraction for c

    Find the remainder when f(x) = 4x3 − 2x2 + 6x − 1 is divided by x − 12.

    What it asks. Find a function value or a remainder.

    Show the steps and the answer

    The plan. Find c, run the multiply-and-add row, then check by substitution.

    c=12

    top row: 4, −2, 6, −1

    4 · 12 = 2, then −2 + 2 = 0

    0 · 12 = 0, then 6 + 0 = 6

    6 · 12 = 3, then −1 + 3 = 2

    bottom row: 4, 0, 6, 2

    1. Plan. Find c, run the multiply-and-add row, then check by substitution.
    1. Say what it asks: divide by x−12 and find the number left over. By the Remainder Theorem it is f(12).The theorem works for any number c, fractions included.
    2. Find c: x−12=0 gives x=12, so c=12. Plug back: 12−12=0.The table runs on the input that makes the divisor zero.
    3. Write the coefficients 4, −2, 6, −1.Every power from x3 down to the constant is present.
    4. Bring down 4. Multiply 4·12=2 and add to −2: −2+2=0.Multiplying by 12 takes half, and half of 4 is 2.
    5. Multiply 0·12=0 and add to 6: 6+0=6.Zero times anything is zero.
    6. Multiply 6·12=3 and add to −1: −1+3=2.Half of 6 is 3, and this last column holds the constant, so the sum is the remainder.
    7. The bottom row is 4, 0, 6, 2. The remainder is 2.The last bottom number is the remainder, which is f(12).
    Answer
    • The remainder is 2.
    • So f(12) = 2.
    Double-check Plug in 12: (12)3 = 18 and (12)2 = 14, so f(12) = 4 · 18 − 2 · 14 + 6 · 12 − 1 = 12 − 12 + 3 − 1 = 2. Same number.

    Rung 6 of 6

    Working backward to a missing coefficient

    When f(x) = x3 + kx2 − 4x + 1 is divided by x − 2, the remainder is 9. Find the number k.

    What it asks. Find a missing coefficient from a remainder.

    Show the steps and the answer

    The plan. Substitute the divisor’s zero, set the result equal to the remainder, and solve.

    remainder from x − 2 = f(2) = 9

    f(2)=8+4k−8+1=4k+1

    4k + 1 = 9

    4k = 8

    k = 2

    1. Plan. Substitute the divisor’s zero, set the result equal to the remainder, and solve.
    1. Say what it asks: k stands for one unknown number inside f. We know the leftover from dividing by x−2 is 9; find the k that makes this true.Here the remainder is given and a coefficient is missing, the reverse of the earlier rungs.
    2. Use the Remainder Theorem: the remainder from dividing by x−2 is f(2), so f(2)=9.The theorem turns a fact about a division into an equation about f.
    3. Work out f(2) with k still a letter: 23+k·22−4·2+1=8+4k−8+1=4k+1.Plugging in keeps the letter in one tidy term; the 8 and the −8 cancel.
    4. Solve 4k+1=9: subtract 1 from both sides to get 4k=8, then divide both sides by 4 to get k=2.This finds the one k that makes the remainder 9. Plug back: 4 · 2 + 1 = 8 + 1 = 9.
    5. Write the finished polynomial: f(x)=x3+2x2−4x+1.Putting k back in lets us check the remainder with the table.
    Answer
    k = 2.
    Double-check Run the table on 1, 2, −4, 1 with c = 2: bring down 1; 1 · 2 + 2 = 4; 4 · 2 + (−4) = 4; 4 · 2 + 1 = 9. The remainder is 9, as the question says.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Dividing f(x) = x2 + 2x + 5 by x + 3 with c = 3: the bottom row is 1, 5, 20, so the remainder looks like 20.
    x + 3 is x − (−3), so the input that makes the divisor zero is −3, not 3. The table with 3 computes f(3) = 9 + 6 + 5 = 20, which is the remainder for x − 3, a different divisor.
    ✓ Instead: Use c = −3: bring down 1; 1 · (−3) + 2 = −1; −1 · (−3) + 5 = 8. The remainder is 8 = f(−3), and 9 − 6 + 5 = 8 agrees.
    ✗ Not this: Dividing f(x) = x3 − 4x + 2 by x − 2 with the coefficients 1, −4, 2: the bottom row is 1, −2, −2, so the remainder looks like −2.
    The table gives each power of x its own column. With no 0 for the missing x2 term, the three numbers fill only three columns: 1 becomes the x2 coefficient, −4 the x coefficient and 2 the constant. So the table works on x2 − 4x + 2 instead, whose value at 2 is 4 − 8 + 2 = −2.
    ✓ Instead: Use 1, 0, −4, 2. The bottom row is 1, 2, 0, 2, so the remainder is 2, and f(2) = 8 − 8 + 2 = 2 agrees.
    ✗ Not this: Getting a remainder of −11 and deciding it must be a mistake, because a remainder cannot be negative.
    With whole numbers the leftover is never negative and is smaller than the divisor. A polynomial remainder is an output f(c), and an output can be any number: negative, zero or large.
    ✓ Instead: Keep −11 when plugging in agrees. Dividing f(x) = x2 − 3x − 9 by x − 1 gives the bottom row 1, −2, −11, and f(1) = 1 − 3 − 9 = −11.
    ✗ Not this: Reading the first number of the bottom row, or the whole row, as the value f(c).
    Only the last number is the remainder. The numbers before it are the coefficients of the quotient q(x), a polynomial, not a value of f.
    ✓ Instead: Dividing 2x3 − 5x2 + x − 4 by x − 3 gives 2, 1, 4, 8: f(3) is 8, and 2, 1, 4 belong to the quotient 2x2 + x + 4.

    Tips and tricks

    • Memory cue: R for Remainder, R for Result. The remainder from dividing by x − c is the result of putting c into f.
    • Fast checks: f(0) is the constant term, and f(1) is the sum of the coefficients, because every power of 1 is 1. For 2x3 − 5x2 + x − 4, a table run with c = 1 must end in 2 − 5 + 1 − 4 = −6.
    • The theorem runs both ways. Asked for a remainder, you may plug in; asked for f(c), you may divide. Choose the road with the smaller arithmetic.
    • The table pays off most when c is big or f has high powers: it never raises a number to a power; it only multiplies by c and adds.
    • Picture the graph: the remainder is how high the curve sits above x = c, so a negative remainder means the curve is below the x-axis there.
    • Where it goes wrong: the sign of c and missing powers cause most wrong remainders. Set the divisor equal to 0 before you start, and count one column per power.

    7 The trap

    Wrong: divide by x + 6 with c = 6. Right: set x + 6 = 0, so c = −6.

    Keep in mind

    • Test tasks: find a remainder or a function value, handle missing powers, and solve for a missing coefficient.

    Flash cards

    Say the answer out loud, then flip.

    You divide a polynomial f(x) by x − c. What does the Remainder Theorem say the remainder is?
    The remainder is f(c), the output you get when you put c in for x.
    You divide f(x) by x + 5. Which number runs the synthetic division table, and how do you confirm it?
    • Use c = −5, not 5.
    • Set the divisor equal to 0: x + 5 = 0 gives x = −5.
    • Plug it back in: −5 + 5 = 0.
    Packing 23 eggs into cartons of 6 checks as 23 = 6 · 3 + 5. What is the matching line for f(x) divided by x − c, and what does it show at x = c?
    • f(x)=(x−c)·q(x)+r.
    • At x = c the first piece is 0 · q(c) = 0, because c − c = 0.
    • Only r is left, so f(c) = r.
    Find the remainder when f(x) = x2 + 3x + 1 is divided by x − 2.
    • c = 2, because 2 − 2 = 0.
    • f(2)=22+3·2+1=4+6+1=11.
    • The remainder is 11.

    Sources

    1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

    From earlier

    Synthetic division by x - c

    You divide by x + 5 using synthetic division. What number goes in the box?
    Show answer
    −5. The divisor must be read as x − c, and x + 5 is x − (−5), so c = −5. The number in the box always has the opposite sign from the one you see in the divisor.

    Synthetic division by x - c

    What row of coefficients do you write for x3 − 4x + 7, and why?
    Show answer
    1, 0, −4, 7. There is no x2 term, so a 0 holds its spot, the same way the 0 in 1,074 holds the hundreds place. Without it, every later number lands in the wrong column.

    Comes back in