Quarry School

Multiplicity and what the graph does at a zero

Subject: MathematicsLeans on: Zeros from the factored formLeans on: Sign of a productLeans on: Odd and even numbersLeans on: Powers of numbers between 0 and 1Leans on: Adding exponentsLeans on: Difference of squaresLeans on: Perfect square trinomial
Level 1 · FoundationsAbout 39 min read4 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Leans on

    Quick review (2 minutes)

    In plain words

    The big picture. Predict how a graph meets the x-axis at each zero.

    Rule

    Let c be a zero of a polynomial f that is not the constant 0. If the factor (x − c) appears exactly m times in the factored form of f(x), then c has multiplicity m. Odd m: the graph crosses the x-axis at x = c. Even m: the graph touches the x-axis at x = c and turns back. The larger m is, the flatter the graph lies near x = c.

    Step

    1. Use the zero-product rule on f(x) = x(x − 3)2(x + 2)3. Solve x = 0, x − 3 = 0 and x + 2 = 0 to get the zeros 0, 3 and −2. These are the inputs where a factor becomes zero.

    2. Use the multiplicity rule: count how often each zero’s factor appears. The lone x counts once, (x − 3)2 counts twice and (x + 2)3 counts three times. Thus 0 has multiplicity 1, 3 has multiplicity 2 and −2 has multiplicity 3.

    3. Apply odd crosses and even touches. At 0, multiplicity 1 gives a crossing; at 3, multiplicity 2 gives a touch and turn; at −2, multiplicity 3 gives a flattened crossing. Odd powers change sign across a zero; even powers keep the same sign.

    4. Check the count using the product’s degree: x · x2 · x3 = x6, and 1 + 2 + 3 = 6. All factors here are powers of x − c, so their multiplicities account for the whole degree.

    5. Check the predicted crossings with signs on both sides, without passing another zero. Around −2, f(−3) = 108 and f(−1) = −16 have opposite signs. Around 0, f(−1) = −16 and f(1) = 108 have opposite signs. Around 3, f(2) = 128 and f(4) = 864 are both positive, which agrees with a touch and turn.

    Question

    What does the graph of f(x) = (x + 1)(x − 4) do at each zero?

    Answer

    x = −1: multiplicity 1, crosses at a slant.
    x = 4: multiplicity 1, crosses at a slant.

    Strategy

    1. Solve the factor equal to zero.

    2. Read its power and decide whether it is odd or even.

    3. State crossing or touch, with flattening when the power exceeds one.

    4. Check the outputs just to either side.

    Strategy

    1. Solve the factor equal to zero.

    2. Read its power and decide whether it is odd or even.

    3. State crossing or touch, with flattening when the power exceeds one.

    4. Check the outputs just to either side.

    Strategy

    1. Solve the factor equal to zero.

    2. Read its power and decide whether it is odd or even.

    3. State crossing or touch, with flattening when the power exceeds one.

    4. Check the outputs just to either side.

    Strategy

    1. Find the distance of the input from the zero.

    2. Raise that same distance to each power.

    3. Compare the outputs without their signs; the smaller is nearer the axis.

    4. Use odd or even powers to decide crossing or touch.

    Strategy

    1. Factor completely, including any bracket under a power.

    2. Set each factor that has an x equal to zero and solve.

    3. Add powers belonging to the same zero.

    4. Odd counts cross; even counts touch and turn. Counts above one flatten at the axis.

    5. Check signs close to each zero, without crossing another zero.

    Strategy

    1. Factor every bracket, distributing any outside power to each factor.

    2. Collect all copies of the factor for the same zero.

    3. Add their exponents.

    4. An odd total crosses and an even total touches; then check the degree.

    Strategy

    1. When every factor has the form x − c, the multiplicities add to the degree. A factor with no real zero, such as x2 + 4, also adds to the degree.

    Trap

    Wrong: cross at every zero. Right: cross at odd multiplicity and touch at even multiplicity.

    Term

    zero of a polynomial

    Definition

    An input that makes the polynomial's output equal 0. On the graph, it is a place where the curve meets the x-axis.

    Term

    multiplicity

    Definition

    The number of times the same factor appears in the factored form: the exponent on that factor. It decides whether the graph crosses the x-axis or only touches it.

    1 In plain words

    The big picture. Predict how a graph meets the x-axis at each zero. After finding zeros, count how often each factor appears. Odd counts cross; even counts touch and turn. Next, use output signs to locate zeros that are harder to find.

    A graph can cross the x-axis like a bird diving through water, or touch and turn like a stone skipping off it. Multiplicity counts how many times a zero’s factor appears. An odd count makes a crossing; an even count makes a touch and turn. Larger counts make the curve flatter near that zero.

    2 Picture it

    zero at x = 224−224zero at x = 21234−224
    Both graphs have a zero at x = 2.

    Reminder

    Reminder: Zeros from the factored form, Sign of a product, Odd and even numbers, Powers of numbers between 0 and 1, Adding exponents, Difference of squares, Perfect square trinomial
    • Zeros from the factored form. Each factor (x − c) gives a zero at x = c. The factor (x + 5) is (x − (−5)), so its zero is x = −5.
    • Sign of a product. A product is negative when an odd number of its factors are negative: (−2)(−2)(−2) = −8, but (−2)(−2) = 4.
    • Odd and even numbers. Even numbers split into pairs with nothing left over: 2, 4, 6. Odd numbers leave one over: 1, 3, 5.
    • Powers of numbers between 0 and 1. Multiplying a number between 0 and 1 by itself makes it smaller: 0.1 · 0.1 = 0.01, and 0.1 · 0.1 · 0.1 = 0.001.
    • Adding exponents. Multiplying powers of the same thing adds the exponents: (x − 3)2 · (x − 3) = (x − 3)3, the same way x2 · x = x3.
    • Difference of squares. a2 − b2 = (a − b)(a + b). For example, x2 − 9 = (x − 3)(x + 3).
    • Perfect square trinomial. a2 − 2ab + b2 = (a − b)2. For example, x2 − 6x + 9 = (x − 3)2, because 2 · 3 = 6 and 3 · 3 = 9.

    3 Why

    Close to a zero at x = c, every other factor keeps its sign, so only (x − c)m can change the sign of the output. Left of c, x − c is negative. Right of c, it is positive. An odd power of a negative number is negative, so the output changes sign and the graph crosses. An even power of a negative number is positive, so the sign is the same on both sides and the graph touches and turns back. The flattening comes from small numbers: 0.12 = 0.01 and 0.13 = 0.001, so a higher power pins the graph closer to the axis.

    4 The rule

    Let c be a zero of a polynomial f that is not the constant 0.

    If the factor (x−c) appears exactly m times in the factored form of f(x), then c has multiplicity m.source 1 Odd m: the graph crosses the x-axis at x=c. Even m: the graph touches the x-axis at x=c and turns back.source 1 The larger m is, the flatter the graph lies near x=c.

    Sources (1)
    1. Jay Abramson. Precalculus 2e, 3.4 Graphs of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

    The same idea, five ways

    Say it

    three is a zero of multiplicity two. Some people say: three is a double zero, or three is a repeated zero.

    Write it

    The factor (x − 3) appears twice in the factored form, so 3 is a zero of multiplicity 2, and the graph touches the x-axis at 3 and turns back.

    In math
    • (x − 3)2 is a factor of f(x) and (x − 3)3 is not
    • f(x) = (x − 3)2·q(x) with q(3) ≠ 0
    • zero: x = 3, multiplicity 2
    • graph words: touches the x-axis at (3, 0) and turns back
    Like

    One guest whose name is written twice on the list: one person, counted twice.

    See it
    zero 3, multiplicity 2246−2246
    The graph of y = (x − 3)2 meets the x-axis at one point, x = 3, and stays on the same side of the axis.

    The same idea, other ways

    As a picture

    The picture shows two graphs with a zero at x = 2. The dashed line y = x − 2 has the factor once: it cuts through the axis at a slant. The solid parabola y = (x − 2)2 has the factor twice: it comes down, touches the axis at one point and goes back up. The cubic y = (x − 2)3, in the picture at the top of this lesson, has the factor three times: it levels off against the axis, then slips through. Zoom in on a zero of multiplicity m of any polynomial other than the constant 0 and you see y = (x − c)m stretched, and possibly flipped upside down; these three pictures are m = 1, 2 and 3.

    zero at x = 224−224
    At the same zero, the dashed line crosses the axis and the solid parabola only touches it.
    As a story

    The x-axis is the surface of a pond. A diving bird is an odd multiplicity: it goes through the surface and ends up on the other side. A skipping stone is an even multiplicity: it meets the surface and comes back up on the side it came from. A higher multiplicity is a plane on a long, low approach: it skims close to the surface for a while before it does its move.

    With small numbers

    Stand close to the zero of y = (x − 2)2, at x = 1.9 and at x = 2.1. The table shows the outputs: (−0.1)2 = 0.01 and (0.1)2 = 0.01. Both are positive, so the graph is above the axis on both sides. It only touched. Now cube instead of square: (−0.1)3 = −0.001 and (0.1)3 = 0.001. One is negative and one is positive, so the graph crossed. Notice how small 0.001 is next to 0.1. That smallness is the flattening.

    input xoutput (x − 2)²1.80.041.90.01202.10.012.20.04↑ solve: output given, read every input above it
    The outputs on both sides of the zero at x = 2 are positive, so the graph never gets below the axis there.
    Why it must be true

    Write (x − c)m as m copies of (x − c) multiplied together. To the left of c, every copy is negative. Negatives cancel in pairs, because two negatives multiply to a positive. With an even number of copies, every negative has a partner, so the product is positive, the same sign it has on the right of c. With an odd number of copies, one negative is left without a partner, so the product is negative, and the sign flips as you pass c.

    As a rule of thumb

    Odd goes through. Even bounces. Bigger exponent, flatter landing. Say it while you point at each exponent in the factored form.

    MultiplicityOdd or evenWhat the graph does at the zeroClose up it looks like, for some number A ≠ 0
    1oddcrosses at a slanty=A(x−c)
    2eventouches and turns backy=A(x−c)2
    3oddflattens, then crossesy=A(x−c)3
    4, 6, 8eventouches and turns back, flatter than a parabolay=A(x−c)m,m=4,6,8
    5, 7, 9oddflattens even more, then crossesy=A(x−c)m,m=5,7,9

    Part 1: Multiplicity 1: crosses at a slant

    What it asks: Describe the crossing at a simple zero.

    A factor appearing once changes sign at its zero. Close up, the curve looks like a slanted line.

    • Factor: (x − c), with no exponent written
    • 1 is odd, so the graph crosses
    • Close up it looks like a slanted line through (c, 0): y = A(x − c) for some number A ≠ 0
    • Sometimes called a simple zero

    The plan

    1. Solve the factor equal to zero.
    2. Read its power and decide whether it is odd or even.
    3. State crossing or touch, with flattening when the power exceeds one.
    4. Check the outputs just to either side.
    crosses at a slant24−2−112
    The line y = x − 2 goes through the x-axis at x = 2 without leveling off.

    Worked example

    Two zeros of multiplicity 1

    What does the graph of f(x) = (x + 1)(x − 4) do at each zero?

    What it asks. Find what the graph does at each zero.

    Show the steps and the answer

    The plan. Solve each factor, read its power, then use odd for crossing and even for touch.

    1. Plan. Solve each factor, read its power, then use odd for crossing and even for touch.
    1. Say what is asked: find the inputs that make the output 0, then say whether the graph crosses or touches at each one.The zeros are where the graph meets the x-axis, and the multiplicity decides what happens there.
    2. Set x+1=0, so x=−1. Set x−4=0, so x=4. Each step finds the input that makes one factor zero. Plug back in: f(−1)=(0)(−5)=0 and f(4)=(5)(0)=0.Each factor (x − c) gives a zero at x = c.
    3. Read the exponents. Neither factor has one written, so both multiplicities are 1.No exponent written means the factor appears once.
    4. 1 is odd, so the graph crosses the x-axis at a slant at both zeros.An odd multiplicity changes the sign of the output across the zero.
    Answer
    • x = −1: multiplicity 1, crosses at a slant.
    • x = 4: multiplicity 1, crosses at a slant.
    Double-check f(−2) = (−1)(−6) = 6, f(0) = (1)(−4) = −4 and f(5) = (6)(1) = 6. The signs go positive, negative, positive, so the graph changes sides at −1 and again at 4.

    Tips and tricks

    • Trap: The coefficient changes height; the exponent counts repeated factors.
    • Trick: Combine repeated factors before deciding odd or even.

    Part 2: Multiplicity 2: touches and turns back

    What it asks: Describe a touch at a double zero.

    A squared factor has the same sign on both sides of its zero. The curve touches and turns like a bouncing ball.

    • Factor: (x − c)2
    • 2 is even, so the output has the same sign on both sides of c
    • Close up it looks like y = A(x − c)2 for some number A ≠ 0: the parabola y = (x − c)2 stretched, and upside down when A < 0
    • Sometimes called a double zero

    The plan

    1. Solve the factor equal to zero.
    2. Read its power and decide whether it is odd or even.
    3. State crossing or touch, with flattening when the power exceeds one.
    4. Check the outputs just to either side.
    touches from below−6−4−2−4−22
    The graph of y = −(x + 3)2 rises to the x-axis at x = −3, touches it, and goes back down.

    Worked example

    A bounce from below

    What does the graph of f(x) = −(x + 3)2 do at its zero?

    What it asks. Find what the graph does at its zero.

    Show the steps and the answer

    The plan. Solve the factor and read its power, then use the minus sign in front to say whether the graph is above or below the axis.

    1. Plan. Solve the factor and read its power, then use the minus sign in front to say whether the graph is above or below the axis.
    1. Say what is asked: find the input that makes the output 0, then decide between crossing and touching.That is what the factored form tells you.
    2. Set x + 3 = 0, so x = −3. This finds the input that makes the factor zero. Plug back in: f(−3)=−(0)2=0.The factor (x + 3) is (x − (−3)), so its zero is −3.
    3. Read the exponent: 2. The multiplicity is 2, which is even, so the graph touches the x-axis and turns back.An even power gives the same sign on both sides of the zero.
    4. Look at the minus sign out front. It makes every other output negative, so the graph touches the axis from below.A square is never negative, and the minus sign in front flips it to never positive.
    Answer
    • Zero: x = −3, multiplicity 2.
    • The graph touches the x-axis at (−3, 0) from below and turns back down.
    Double-check f(−4) = −(−1)2 = −1 and f(−2) = −(1)2 = −1. Both outputs are negative, so the graph is below the axis on both sides of −3. It touched and did not cross.

    Tips and tricks

    • Trap: The coefficient changes height; the exponent counts repeated factors.
    • Trick: Combine repeated factors before deciding odd or even.

    Part 3: Multiplicity 3: flattens, then crosses

    What it asks: Describe a flattened crossing at a triple zero.

    A cubed factor changes sign and lies flat at its zero. The curve crosses after flattening.

    • Factor: (x − c)3
    • 3 is odd, so the graph crosses
    • Close up it looks like y = A(x − c)3 for some number A ≠ 0: flat where it meets the axis, then through
    • Sometimes called a triple zero

    The plan

    1. Solve the factor equal to zero.
    2. Read its power and decide whether it is odd or even.
    3. State crossing or touch, with flattening when the power exceeds one.
    4. Check the outputs just to either side.
    flattens, then crosses2−22
    The graph of y = (x − 1)3 lies almost flat along the x-axis near x = 1, then passes to the other side.

    Worked example

    How flat is flat

    What does the graph of f(x) = (x − 1)3 do at its zero, and how far from the x-axis is it at x = 0.9 and x = 1.1?

    What it asks. Find the zero, what the graph does there, and the output at each of the two inputs.

    Show the steps and the answer

    The plan. Solve the factor and read its power, then compute the output at each nearby input.

    1. Plan. Solve the factor and read its power, then compute the output at each nearby input.
    1. Say what is asked: find the zero, decide between crossing and touching, then find the outputs for two inputs close to the zero.The outputs near the zero show how tightly the graph hugs the axis.
    2. Set x−1=0, so x=1. Plug back in: f(1)=(0)3=0. The exponent is 3, so the multiplicity is 3.The exponent counts how many times the factor appears.
    3. 3 is odd, so the graph crosses.An odd power of a negative number is negative, so the sign changes across the zero.
    4. Compute f(0.9)=(−0.1)3=−0.001 and f(1.1)=(0.1)3=0.001.(0.1)(0.1)(0.1) = 0.001, and three negatives multiply to a negative.
    5. Compare with the line y=x−1 at the same inputs: −0.1 and 0.1. The cubic is 100 times closer to the axis.0.1 ÷ 0.001 = 100. That closeness is what flattening means.
    Answer
    • Zero: x = 1, multiplicity 3.
    • The graph flattens and crosses the x-axis at (1, 0).
    • f(0.9) = −0.001 and f(1.1) = 0.001.
    Double-check Farther out, f(0) = (−1)3 = −1 and f(2) = (1)3 = 1. Negative on the left and positive on the right, so the graph did cross.

    Tips and tricks

    • Trap: The coefficient changes height; the exponent counts repeated factors.
    • Trick: Combine repeated factors before deciding odd or even.

    Part 4: Multiplicity 4 and up: the same two moves, flatter

    What it asks: Compare higher powers near a zero.

    Higher even powers touch; higher odd powers cross. Less than one unit from the zero, a larger power gives an output closer to zero.

    • Even multiplicity 4, 6, 8: touches and turns back, flatter near the zero than a parabola
    • Odd multiplicity 5, 7, 9: flattens and crosses, flatter near the zero than a cubic
    • Within one unit of c, but not at c itself, a higher power is smaller: (x − c)4 is closer to 0 than (x − c)2, and (x − c)6 closer still, so a higher multiplicity lies flatter against the axis near the zero

    The plan

    1. Find the distance of the input from the zero.
    2. Raise that same distance to each power.
    3. Compare the outputs without their signs; the smaller is nearer the axis.
    4. Use odd or even powers to decide crossing or touch.
    input xoutput (x − 1)⁴010.50.0625101.50.062521↑ solve: output given, read every input above it
    Half a unit from the zero at x = 1 the output is only 0.0625, so the graph is still very close to the axis.

    Worked example

    Squared against fourth power

    At x = 1.5, which graph is closer to the x-axis: y = (x − 1)2 or y = (x − 1)4?

    What it asks. Compare higher powers near a zero.

    Show the steps and the answer

    The plan. Evaluate both powers at the same input; the smaller output is nearer the axis.

    1. Plan. Evaluate both powers at the same input; the smaller output is nearer the axis.
    1. Say what is asked: put the input 1.5 into both formulas and compare the two outputs. The smaller output is closer to the axis.The output is the height of the graph above the x-axis.
    2. Compute the inside first: 1.5−1=0.5.Parentheses come first.
    3. Square it: (0.5)2=0.5·0.5=0.25.Squaring means multiplying the number by itself.
    4. Raise it to the fourth power: (0.5)4=0.25·0.25=0.0625.A fourth power is a square of a square.
    5. Compare: 0.0625 < 0.25, so the fourth power graph is closer to the axis. Both outputs are positive, so both graphs touch and turn back at x=1.Multiplying a number between 0 and 1 by itself makes it smaller, and both exponents are even.
    Answer
    y = (x − 1)4 is closer: its height is 0.0625, against 0.25 for y = (x − 1)2.
    Double-check With fractions: 0.5 = 12, so the square is 14 and the fourth power is 116. One sixteenth is smaller than one quarter, which agrees.

    Tips and tricks

    • Trap: The coefficient changes height; the exponent counts repeated factors.
    • Trick: Combine repeated factors before deciding odd or even.

    Part 5: Factor first, then count

    What it asks: Find multiplicities hidden in an expanded formula.

    Factor the sum before counting. Keep any power of x taken out in front. Recognize a perfect-square trinomial by checking its two end squares and its middle term.

    • x3 in front is the factor x three times: the zero 0 with multiplicity 3.
    • A perfect square with a number in front of x: a2x2 + 2abx + b2 = (ax + b)2. Test the two ends first: 4x2 = (2x)2 and 25 = 52. Then test the middle: 2 · 2x · 5 = 20x.
    • A bracket (ax + b)m gives one zero, the solution of ax + b = 0, with multiplicity m. The number a changes the height of the graph. It does not change the count.
    • The same factor in two places: add the powers. x2 · x3 = x5.
    • Check: add the multiplicities. When every factor holds x to the first power, the total equals the degree.

    The plan

    1. Factor completely, including any bracket under a power.
    2. Set each factor that has an x equal to zero and solve.
    3. Add powers belonging to the same zero.
    4. Odd counts cross; even counts touch and turn. Counts above one flatten at the axis.
    5. Check signs close to each zero, without crossing another zero.

    4x5+20x4+25x3

    =x3(4x2+20x+25)

    4x2=(2x)2,25=52,2·2x·5=20x

    =x3(2x+5)2

    zero 0: multiplicity 3

    zero −52: multiplicity 2

    Worked example

    A power of x in front and a perfect square with a number in front of x

    Find the zeros of f(x) = 4x5 + 20x4 + 25x3, their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and what the graph does there.

    input xoutput f(x)−3−27−2.50−1−900149
    x:−3,−2.5,−1,0,1;f(x):−27,0,−9,0,49.
    Show the steps and the answer

    The plan. Take out the common power of x, factor the perfect square, then read zeros, powers and behavior.

    input xoutput f(x)−3−27−2.50−1−900149↑ solve: output given, read every input above it
    Negative on both sides of −2.5, the touch. A sign change across 0, the crossing.
    1. Plan. Take out the common power of x, factor the perfect square, then read zeros, powers and behavior.
    2. Every term holds x3. Take it out in front. It is a factor with its own zero and multiplicity.
    3. Test the bracket for a perfect square: are the two ends squares, and is the middle twice the product of their roots?
    1. Say what is asked: factor the formula fully, then read each zero, the power on its factor, and whether that power is odd or even.Multiplicities can be read only from the factored form.
    2. Pull out the common factor x3: f(x)=x3(4x2+20x+25).x3 is the highest power of x in every term. Multiply back: x3 · 4x2 = 4x5, x3 · 20x = 20x4, x3 · 25 = 25x3.
    3. Test the bracket for a perfect square. The ends are squares: 4x2=(2x)2 and 25=52. The middle should be 2·2x·5=20x, and it is.(a + b)2 = a2 + 2ab + b2. Here a is 2x and b is 5.
    4. Write the factored form: f(x)=x3(2x+5)2.Multiply back: (2x + 5)(2x + 5) = 4x2 + 10x + 10x + 25 = 4x2 + 20x + 25.
    5. Read the first zero. x3 is the factor x three times, so x=0 has multiplicity 3.A bare power of x is (x − 0) raised to that power.
    6. Read the second zero. Set 2x+5=0: subtract 5 to get 2x=−5, then divide by 2 to get x=−52. The power on the bracket is 2, so the multiplicity is 2.The zero comes from solving the inside of the bracket. The multiplicity is the power outside.
    7. Decide the behavior. At 0 the multiplicity 3 is odd: the graph flattens and crosses. At −52 the multiplicity 2 is even: the graph touches the x-axis and turns back.Odd goes through, even bounces, and 3 or more lies flat.
    8. Add the multiplicities: 3+2=5, the degree of 4x5+20x4+25x3.The count matches the degree, so no zero was missed.
    Answer
    • f(x)=x3(2x+5)2
    • x = −52: multiplicity 2, touches and turns back.
    • x = 0: multiplicity 3, flattens and crosses.
    Double-check Use the original formula on each side of the zeros. f(−3) = 4(−243) + 20(81) + 25(−27) = −972 + 1620 − 675 = −27 and f(−1) = −4 + 20 − 25 = −9: negative on both sides of −52, so the graph touched, from below. f(−1) = −9 and f(1) = 4 + 20 + 25 = 49: negative, then positive across 0, so it crossed. At the zero itself the factored form gives f(−52) = (−52)3 · (−5 + 5)2 = 0.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: f(x) = x3(2x + 5)2 has the zero −5 with multiplicity 2.
    The zero is the input that makes the inside 0, and 2 · (−5) + 5 = −5, not 0.
    ✓ Instead: Solve 2x + 5 = 0: x = −52. Check: 2 · (−52) + 5 = −5 + 5 = 0.
    ✗ Not this: After pulling out x3, the only zero of f(x) = x3(2x + 5)2 is −52, because x3 is not a bracket.
    x3 is a factor that holds x. At x = 0 it is 0, so f(0) = 0.
    ✓ Instead: 0 is a zero with multiplicity 3, the power on x.

    Tips and tricks

    • Trap: The coefficient changes height; the exponent counts repeated factors.
    • Trick: Combine repeated factors before deciding odd or even.

    Part 6: A factor in more than one place

    What it asks: Count one zero whose factor appears in several brackets.

    The factored form separates zeros and powers. If a zero’s factor appears elsewhere too, combine the powers before counting.

    The plan

    1. Factor every bracket, distributing any outside power to each factor.
    2. Collect all copies of the factor for the same zero.
    3. Add their exponents.
    4. An odd total crosses and an even total touches; then check the degree.

    f(x)=(x2−4)2(x+2)

    x2−4=(x−2)(x+2)

    (x2−4)2=(x−2)2(x+2)2

    x + 2 in two places: powers 2 and 1 add to 3

    f(x)=(x−2)2(x+2)3

    zero 2: multiplicity 2, touches

    zero −2: multiplicity 3, flattens and crosses

    check: 2 + 3 = 5, the degree

    Tips and tricks

    • Trap: Reading only one copy gives the wrong multiplicity.
    • Trick: Write the repeated factor once with the sum of its powers.

    5 How

    1. Use the zero-product rule on f(x) = x(x − 3)2(x + 2)3. Solve x = 0, x − 3 = 0 and x + 2 = 0 to get the zeros 0, 3 and −2. These are the inputs where a factor becomes zero.
    2. Use the multiplicity rule: count how often each zero’s factor appears. The lone x counts once, (x − 3)2 counts twice and (x + 2)3 counts three times. Thus 0 has multiplicity 1, 3 has multiplicity 2 and −2 has multiplicity 3.
    3. Apply odd crosses and even touches. At 0, multiplicity 1 gives a crossing; at 3, multiplicity 2 gives a touch and turn; at −2, multiplicity 3 gives a flattened crossing. Odd powers change sign across a zero; even powers keep the same sign.
    4. Check the count using the product’s degree: x · x2 · x3 = x6, and 1 + 2 + 3 = 6. All factors here are powers of x − c, so their multiplicities account for the whole degree.
    5. Check the predicted crossings with signs on both sides, without passing another zero. Around −2, f(−3) = 108 and f(−1) = −16 have opposite signs. Around 0, f(−1) = −16 and f(1) = 108 have opposite signs. Around 3, f(2) = 128 and f(4) = 864 are both positive, which agrees with a touch and turn.

    Check the total

    1. When every factor has the form x − c, the multiplicities add to the degree. A factor with no real zero, such as x2 + 4, also adds to the degree.

    6 Worked example

    Worked example

    Three zeros, three different behaviors

    For f(x) = x(x − 3)2(x + 2)3, find each zero, its multiplicity, and whether the graph crosses the x-axis there or touches it and turns back.

    What it asks. Find each zero, its multiplicity and its behavior.

    input xoutput f(x)−3108−20−1−160011082128304864
    x:−3,−2,−1,0,1,2,3,4;f(x):108,0,−16,0,108,128,0,864.
    Show the steps and the answer

    The plan. Solve each factor, read its power, then use odd for crossing and even for touch.

    input xoutput f(x)−3108−20−1−160011082128304864↑ solve: output given, read every input above it
    The three highlighted 0s are the zeros.
    1. Plan. Solve each factor, read its power, then use odd for crossing and even for touch.
    1. Say what the question asks: find every input that makes the output 0, count how many times each one's factor appears, and use that count to say what the graph does at that spot.A zero of a polynomial is an input whose output is 0, and the multiplicity is the count of its factor.
    2. List the factors with their exponents: x has exponent 1, (x−3) has exponent 2, and (x+2) has exponent 3.No exponent written means the factor appears once, so the lone x counts once.
    3. Set x=0. This finds the input that makes the first factor zero. Plug it back in: f(0)=0·(0−3)2·(0+2)3=0·9·8=0. So 0 is a zero with multiplicity 1.The factor x is the same as (x − 0), and one zero factor makes the whole product 0.
    4. Set x−3=0, so x=3. This finds the input that makes the second factor zero. Plug it back in: f(3)=3·(0)2·(5)3=3·0·125=0. So 3 is a zero with multiplicity 2.The exponent on (x − 3) is 2.
    5. Set x+2=0, so x=−2. This finds the input that makes the third factor zero. Plug it back in: f(−2)=(−2)·(−5)2·(0)3=(−2)·25·0=0. So −2 is a zero with multiplicity 3.The exponent on (x + 2) is 3.
    6. Sort the multiplicities into odd and even. At x=0 the multiplicity is 1, odd: the graph crosses at a slant. At x=3 it is 2, even: the graph touches and turns back. At x=−2 it is 3, odd: the graph flattens, then crosses.An odd count of the factor lets the sign of the output change across the zero. An even count does not.
    7. Add the multiplicities: 1+2+3=6. Multiply the leading pieces: x·x2·x3=x6, so the degree is 6. The two numbers match.When every factor has the form (x − c), the multiplicities add up to the degree, so no zero was missed.
    Answer
    • x = −2: multiplicity 3, the graph flattens and crosses.
    • x = 0: multiplicity 1, the graph crosses at a slant.
    • x = 3: multiplicity 2, the graph touches the x-axis and turns back.
    Double-check Plug in a number on each side of every zero and watch the sign. The table shows the values. f(−3) = (−3)(−6)2(−1)3 = (−3)(36)(−1) = 108 and f(−1) = (−1)(−4)2(1)3 = −16: positive, then negative, so the graph crosses at −2. f(−1) = −16 and f(1) = (1)(−2)2(3)3 = 108: negative, then positive, so it crosses at 0. f(2) = (2)(−1)2(4)3 = 128 and f(4) = (4)(1)2(6)3 = 864: positive on both sides, so it touches at 3 and turns back.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 10

    One factor, squared

    Find the zero of f(x) = (x − 4)2, its multiplicity, and what the graph does there.

    What it asks. Find each zero, its multiplicity and its behavior.

    touches(3, 1)(5, 1)246−2246
    The points on each side of the zero are both above the axis, so the graph only touches at x = 4.
    Show the steps and the answer

    The plan. Solve each factor, read its power, then use odd for crossing and even for touch.

    1. Plan. Solve each factor, read its power, then use odd for crossing and even for touch.
    1. Say what is asked: find the input that makes the output 0, count how many times its factor appears, and decide between crossing and touching.Those are the three things the factored form tells you.
    2. Set x − 4 = 0, so x = 4. This finds the input that makes the factor zero. Plug it back in: f(4)=(4−4)2=02=0.A factor (x − c) gives a zero at x = c.
    3. Read the exponent: 2. The multiplicity is 2.The exponent counts how many times the factor appears.
    4. 2 is even, so the graph touches the x-axis at x=4 and turns back.An even power gives the same sign on both sides of the zero.
    Answer
    • Zero: x = 4, multiplicity 2.
    • The graph touches the x-axis at (4, 0) and turns back.
    Double-check f(3) = (−1)2 = 1 and f(5) = (1)2 = 1. Both outputs are positive, so the graph is above the axis on both sides of 4. It touched and did not cross.

    Rung 2 of 10

    Two factors, one of them cubed

    Find the zeros of g(x) = (x + 1)(x − 2)3, their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and its behavior.

    Show the steps and the answer

    The plan. Solve each factor, read its power, then use odd for crossing and even for touch.

    1. Plan. Solve each factor, read its power, then use odd for crossing and even for touch.
    1. Say what is asked: find each input that makes the output 0, read the exponent on its factor, and decide what the graph does there.Each factor gives one zero and one multiplicity.
    2. Set x+1=0, so x=−1. Plug back in: g(−1)=(0)(−3)3=0. The factor has no exponent written, so the multiplicity is 1.(x + 1) is (x − (−1)), and it appears once.
    3. Set x−2=0, so x=2. Plug back in: g(2)=(3)(0)3=0. The exponent is 3, so the multiplicity is 3.The exponent on (x − 2) is 3.
    4. Both multiplicities are odd, so the graph crosses at both zeros. At −1 it crosses at a slant. At 2 it flattens first, then crosses.Odd goes through, and a multiplicity of 3 lies flat against the axis.
    5. Add the multiplicities: 1+3=4. The leading pieces give x·x3=x4, degree 4. They match.The multiplicities add up to the degree when every factor has the form (x − c).
    Answer
    • x = −1: multiplicity 1, crosses at a slant.
    • x = 2: multiplicity 3, flattens and crosses.
    Double-check g(−2) = (−1)(−4)3 = (−1)(−64) = 64, g(0) = (1)(−2)3 = −8 and g(3) = (4)(1)3 = 4. The signs go positive, negative, positive, so the graph changes sides at −1 and again at 2.

    Rung 3 of 10

    A number out front and a bare power of x

    Find the zeros of h(x) = −2x3(x − 5)2, their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and its behavior.

    Show the steps and the answer

    The plan. Solve each factor, read its power, then use odd for crossing and even for touch.

    1. Plan. Solve each factor, read its power, then use odd for crossing and even for touch.
    1. Say what is asked: find the inputs that make the output 0, with their multiplicities, and the behavior at each.Same three questions as before, with two new wrinkles in the formula.
    2. Set the −2 aside. It gives no zero.A nonzero number stays nonzero, whatever x is.
    3. Read x3 as (x − 0)3. Its zero is x = 0 with multiplicity 3. Plug back in: h(0)=−2·03·(−5)2=−2·0·25=0.A bare x is the factor (x − 0), and its exponent is the multiplicity.
    4. Set x − 5 = 0, so x = 5, with multiplicity 2. Plug back in: h(5)=−2·125·02=0.The exponent on (x − 5) is 2.
    5. At 0 the multiplicity 3 is odd: the graph flattens and crosses. At 5 the multiplicity 2 is even: the graph touches and turns back.Odd goes through, even bounces.
    Answer
    • x = 0: multiplicity 3, flattens and crosses.
    • x = 5: multiplicity 2, touches and turns back.
    • The −2 gives no zero.
    Double-check h(−1) = −2 · (−1)3 · (−6)2 = −2 · (−1) · 36 = 72, h(1) = −2 · 1 · (−4)2 = −32 and h(6) = −2 · 216 · 12 = −432. The sign changes from positive to negative across 0, so the graph crosses there. It is negative on both sides of 5, so the graph touches there, from below. Also 3 + 2 = 5, the degree.

    Rung 4 of 10

    Factor first

    Find the zeros of p(x) = x3 − 6x2 + 9x, their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and its behavior.

    Show the steps and the answer

    The plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.

    1. Plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.
    1. Say what is asked: the same three things, but this formula is not factored yet, so factoring comes first.Multiplicities can only be read from the factored form.
    2. Pull out the common factor x: p(x)=x(x2−6x+9).Every term has at least one x in it.
    3. Recognize x2−6x+9 as a perfect square trinomial: it equals (x−3)2.3 · 3 = 9 and 2 · 3 = 6, and (x − 3)2 = x2 − 6x + 9.
    4. Write the factored form: p(x)=x(x−3)2.Now every factor has the form (x − c).
    5. Read the zeros. x=0 has multiplicity 1. x=3 has multiplicity 2. Plug back into the original formula: p(0)=0−0+0=0 and p(3)=27−54+27=0.Plugging into the original formula is also a quick check on the factoring.
    6. At 0 the multiplicity is odd: the graph crosses at a slant. At 3 it is even: the graph touches and turns back.Odd goes through, even bounces.
    Answer
    • p(x)=x(x−3)2.
    • x = 0: multiplicity 1, crosses at a slant.
    • x = 3: multiplicity 2, touches and turns back.
    Double-check Using the original formula: p(−1) = −1 − 6 − 9 = −16, p(1) = 1 − 6 + 9 = 4 and p(4) = 64 − 96 + 36 = 4. Negative, then positive across 0: it crossed. Positive on both sides of 3: it touched.

    Rung 5 of 10

    A repeated factor hiding behind grouping

    Find the zeros of k(x) = x3 − 3x2 − 9x + 27, their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and its behavior.

    Show the steps and the answer

    The plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.

    1. Plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.
    1. Say what is asked: factor the formula fully, then read each zero, its multiplicity and the behavior.With four terms and no common factor, grouping is the tool to try.
    2. Group in pairs and factor each pair: (x3−3x2)+(−9x+27)=x2(x−3)−9(x−3).x2 comes out of the first pair and −9 out of the second, leaving the same bracket (x − 3) in both.
    3. Pull out the shared bracket: k(x)=(x−3)(x2−9).Both pieces contain (x − 3).
    4. Factor the difference of squares: x2−9=(x−3)(x+3).x2 − 9 is x2 − 32, and a2 − b2 = (a − b)(a + b).
    5. Collect the copies: k(x)=(x−3)(x−3)(x+3)=(x−3)2(x+3).The factor (x − 3) appeared in two places, so its exponents add: 1 + 1 = 2.
    6. Read the zeros. x=3 has multiplicity 2. x=−3 has multiplicity 1. Plug back into the original formula: k(3)=27−27−27+27=0 and k(−3)=−27−27+27+27=0.Both inputs give output 0, a check that agrees with the factoring.
    7. At 3 the multiplicity is even: the graph touches and turns back. At −3 it is odd: the graph crosses at a slant.Odd goes through, even bounces.
    Answer
    • k(x)=(x−3)2(x+3).
    • x = −3: multiplicity 1, crosses at a slant.
    • x = 3: multiplicity 2, touches and turns back.
    Double-check Using the original formula: k(−4) = −64 − 48 + 36 + 27 = −49, k(0) = 27 and k(4) = 64 − 48 − 36 + 27 = 7. Negative, then positive across −3: it crossed. Positive on both sides of 3: it touched. Also 2 + 1 = 3, the degree.

    Rung 6 of 10

    A power on a bracket that still factors

    Find the zeros of r(x) = (x2 − 1)2(x − 1), their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and its behavior.

    Show the steps and the answer

    The plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.

    1. Plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.
    1. Say what is asked: the formula looks factored, but one bracket can be broken down further. Break it down, then read the zeros, multiplicities and behavior.A multiplicity read before the factoring is finished can be wrong.
    2. Factor the inside of the squared bracket: x2−1=(x−1)(x+1).x2 − 1 is a difference of squares, x2 − 12.
    3. Apply the square to both factors: (x2−1)2=(x−1)2(x+1)2.A power on a product goes onto each factor: (ab)2 = a2b2.
    4. Collect the copies of (x − 1): r(x)=(x−1)2(x+1)2(x−1)=(x−1)3(x+1)2.The same factor in two places adds its exponents: 2 + 1 = 3.
    5. Read the zeros. x=1 has multiplicity 3. x=−1 has multiplicity 2. Plug back into the original formula: r(1)=(1−1)2(0)=0 and r(−1)=(1−1)2(−2)=0.Both inputs make the output 0.
    6. At 1 the multiplicity 3 is odd: the graph flattens and crosses. At −1 the multiplicity 2 is even: the graph touches and turns back.Odd goes through, even bounces, and 3 or more lies flat.
    Answer
    • r(x)=(x−1)3(x+1)2.
    • x = −1: multiplicity 2, touches and turns back.
    • x = 1: multiplicity 3, flattens and crosses.
    Double-check Using the original formula: r(−2) = (4 − 1)2(−3) = 9 · (−3) = −27, r(0) = (0 − 1)2(−1) = −1 and r(2) = (4 − 1)2(1) = 9. Negative on both sides of −1: it touched, from below. Negative, then positive across 1: it crossed. Also 3 + 2 = 5, and the degree is 5 because (x2)2 · x = x5.

    Rung 7 of 10

    A number in front of x inside a bracket with a power

    Find the zeros of h(x) = x4(4x − 3)3(x + 2)2, their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and its behavior.

    Show the steps and the answer

    The plan. Solve each factor, read its power, then use odd for crossing and even for touch.

    1. Plan. Solve each factor, read its power, then use odd for crossing and even for touch.
    2. The formula is a product already. Take the factors one at a time.
    3. For (4x − 3)3, solve 4x − 3 = 0 for the zero. The power 3 is its multiplicity.
    1. Say what is asked: for each factor, the input that makes it 0, the power on it, and what that power tells the graph to do.The formula is fully factored, so the powers can be read as they stand.
    2. Take x4: the zero is 0, with multiplicity 4. Plug back: h(0)=0·(−3)3·22=0.A bare power of x is (x − 0) raised to that power.
    3. Take (4x−3)3: set 4x−3=0, add 3 to get 4x=3, then divide by 4 to get x=34. The multiplicity is 3.The 4 in front of x means you solve the small equation. Check: 4 · 34 − 3 = 3 − 3 = 0.
    4. Take (x+2)2: set x+2=0, so x=−2. The multiplicity is 2.A plus inside the bracket gives a negative zero: −2 + 2 = 0.
    5. Decide the behavior. At −2 the multiplicity 2 is even: the graph touches and turns back. At 0 the multiplicity 4 is even: the graph touches and turns back, flatter than a parabola. At 34 the multiplicity 3 is odd: the graph flattens and crosses.Odd goes through, even bounces, and a larger power lies flatter.
    6. Add the multiplicities: 4+3+2=9, the degree.The leading pieces multiply to x4 · (4x)3 · x2 = 64x9.
    Answer
    • x = −2: multiplicity 2, touches and turns back.
    • x = 0: multiplicity 4, touches and turns back.
    • x = 34: multiplicity 3, flattens and crosses.
    Double-check Plug in a number on each side of every zero. h(−3) = 81 · (−15)3 · (−1)2 = 81 · (−3375) · 1, which is negative, and h(−1) = 1 · (−7)3 · 12 = −343: negative on both sides of −2, a touch. h(−1) = −343 and h(12) = 116 · (−1)3 · 254 = −2564: negative on both sides of 0, a touch. h(12) is negative and h(1) = 1 · 13 · 32 = 9 is positive: a crossing at 34.

    Rung 8 of 10

    A trinomial bracket that is a perfect square

    Find the zeros of g(x) = (5x + 2)3(x2 − 14x + 49), their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and its behavior.

    Show the steps and the answer

    The plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.

    1. Plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.
    2. The second bracket is not finished. Test it for a perfect square.
    3. For (5x + 2)3, solve 5x + 2 = 0 for the zero.
    1. Say what is asked: finish the factoring, then read each zero, its multiplicity and the behavior.A trinomial bracket can hide a repeated factor.
    2. Test x2−14x+49 for a perfect square. The ends are x2 and 49=72. The middle should be 2·x·7=14x with a minus sign, and it is. So x2−14x+49=(x−7)2.a2 − 2ab + b2 = (a − b)2. Multiply back: (x − 7)(x − 7) = x2 − 7x − 7x + 49.
    3. Write the factored form: g(x)=(5x+2)3(x−7)2.Every bracket now holds x to the first power, with its own power outside.
    4. Take (5x+2)3: set 5x+2=0, subtract 2 to get 5x=−2, then divide by 5 to get x=−25. The multiplicity is 3.Check: 5 · (−25) + 2 = −2 + 2 = 0.
    5. Take (x−7)2: the zero is 7, with multiplicity 2.x − 7 = 0 at x = 7, and the power outside is 2.
    6. Decide the behavior. At −25 the multiplicity 3 is odd: the graph flattens and crosses. At 7 the multiplicity 2 is even: the graph touches and turns back.Odd goes through, even bounces.
    Answer
    • g(x)=(5x+2)3(x−7)2
    • x = −25: multiplicity 3, flattens and crosses.
    • x = 7: multiplicity 2, touches and turns back.
    Double-check Use the original formula. g(−1) = (−3)3 · (1 + 14 + 49) = −27 · 64 = −1728 and g(0) = 23 · 49 = 8 · 49 = 392: negative, then positive across −25, so the graph crossed. g(0) = 392 and g(8) = 423 · (64 − 112 + 49) = 423 · 1 are both positive: the same sign on both sides of 7, so the graph touched. Also 3 + 2 = 5, the degree.

    Rung 9 of 10

    A power of x in front, then a trinomial

    Find the zeros of p(x) = x5 − 4x4 − 12x3, their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and its behavior.

    Show the steps and the answer

    The plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.

    1. Plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.
    2. Every term holds x3. Take it out in front.
    3. For x2 − 4x − 12, look for two numbers that multiply to −12 and add to −4.
    1. Say what is asked: factor first, then read each zero, its multiplicity and the behavior.The formula is a sum of three terms, so no power can be read from it as it stands.
    2. Pull out the common factor x3: p(x)=x3(x2−4x−12).x3 is the highest power of x in every term. Multiply back: x3 · x2 = x5, x3 · (−4x) = −4x4, x3 · (−12) = −12x3.
    3. Find two numbers that multiply to −12 and add to −4: 2 and −6. So x2−4x−12=(x+2)(x−6).2 · (−6) = −12 and 2 + (−6) = −4. Multiply back: x2 − 6x + 2x − 12 = x2 − 4x − 12.
    4. Write the factored form: p(x)=x3(x+2)(x−6).Every factor is now x, or x plus or minus a number, with its power.
    5. Read the zeros. x3 gives 0 with multiplicity 3. x+2 gives −2 with multiplicity 1. x−6 gives 6 with multiplicity 1.No power written on a bracket means the factor appears once.
    6. Decide the behavior. At −2 and at 6 the graph crosses at a slant. At 0 it flattens and crosses.All three multiplicities are odd, and the 3 at 0 lies flat.
    Answer
    • p(x)=x3(x+2)(x−6)
    • x = −2: multiplicity 1, crosses at a slant.
    • x = 0: multiplicity 3, flattens and crosses.
    • x = 6: multiplicity 1, crosses at a slant.
    Double-check Use the original formula. p(−3) = −243 − 324 + 324 = −243, p(−1) = −1 − 4 + 12 = 7, p(1) = 1 − 4 − 12 = −15 and p(7) = 16807 − 9604 − 4116 = 3087. The signs go negative, positive, negative, positive, so the graph changes sides at −2, at 0 and at 6. Also 1 + 3 + 1 = 5, the degree.

    Rung 10 of 10

    X as a factor in two places

    Find the zeros of r(x) = 5x2(4x5 − 4x4 + x3), their multiplicities, and what the graph does at each.

    What it asks. Find each zero, its multiplicity and its behavior.

    Show the steps and the answer

    The plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.

    1. Plan. Factor fully, combine repeated factors, then use odd for crossing and even for touch.
    2. The bracket is not finished: every term inside holds x3. Take it out and join it with the x2 in front.
    3. After that, test what is left in the bracket for a perfect square.
    1. Say what is asked: the formula looks factored, but the bracket can be broken down further. Finish the factoring, then read the zeros, multiplicities and behavior.A multiplicity read before the factoring is finished can be wrong.
    2. Pull x3 out of the bracket: 4x5−4x4+x3=x3(4x2−4x+1).x3 is the highest power of x in every term of the bracket. Multiply back: x3 · 4x2 = 4x5, x3 · (−4x) = −4x4, x3 · 1 = x3.
    3. Join the two powers of x: r(x)=5x2·x3(4x2−4x+1)=5x5(4x2−4x+1).The same factor in two places adds its powers: 2 + 3 = 5.
    4. Test 4x2−4x+1 for a perfect square. The ends are (2x)2 and 12. The middle should be 2·2x·1=4x with a minus sign, and it is. So 4x2−4x+1=(2x−1)2.a2 − 2ab + b2 = (a − b)2. Multiply back: (2x − 1)(2x − 1) = 4x2 − 2x − 2x + 1.
    5. Write the factored form: r(x)=5x5(2x−1)2.The 5 in front is a number, so it gives no zero.
    6. Read the zeros. x5 gives 0 with multiplicity 5. 2x−1=0 gives 2x=1, so x=12, with multiplicity 2.Check: 2 · 12 − 1 = 1 − 1 = 0.
    7. Decide the behavior. At 0 the multiplicity 5 is odd: the graph flattens and crosses. At 12 the multiplicity 2 is even: the graph touches and turns back.Odd goes through, even bounces.
    Answer
    • r(x)=5x5(2x−1)2
    • x = 0: multiplicity 5, flattens and crosses.
    • x = 12: multiplicity 2, touches and turns back.
    • The 5 gives no zero.
    Double-check Use the original formula at −1 and at 1. r(−1) = 5 · 1 · (−4 − 4 − 1) = 5 · (−9) = −45 and r(1) = 5 · 1 · (4 − 4 + 1) = 5. Between the zeros, the factored form gives r(14) = 5 · (14)5 · (12 − 1)2 = 5 · 11024 · 14 = 54096, which is positive. Negative at −1, then positive at 14: the graph crossed at 0. Positive at 14 and at 1: the same sign on both sides of 12, so it touched. Also 5 + 2 = 7, the degree.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: In f(x) = (x − 5)2, the zero is 2 and its multiplicity is 5.
    The two numbers were swapped. The zero comes from setting the inside equal to 0. The multiplicity is the exponent outside.
    ✓ Instead: x − 5 = 0 gives the zero x = 5. The exponent 2 is the multiplicity. Check: f(5) = 02 = 0, while f(2) = (−3)2 = 9, which is not 0.
    ✗ Not this: In f(x) = (x2 − 4)(x − 2), the factor (x − 2) has no exponent, so 2 is a zero of multiplicity 1 and the graph crosses there.
    The factoring is not finished. x2 − 4 = (x − 2)(x + 2) hides a second copy of (x − 2).
    ✓ Instead: f(x) = (x − 2)2(x + 2). The zero 2 has multiplicity 2, so the graph touches and turns back. Check: f(1) = (−3)(−1) = 3 and f(3) = (5)(1) = 5, positive on both sides.
    ✗ Not this: An even multiplicity means the graph stays above the x-axis near that zero.
    Even means the same side on both sides. It does not say which side. The other factors and the sign out front decide that.
    ✓ Instead: f(x) = −(x − 1)2 touches the axis at x = 1 from below: f(0) = −1 and f(2) = −1.
    ✗ Not this: g(x) = (x2 + 4)(x − 1) has a factor with an even exponent, so the graph touches the axis somewhere because of x2 + 4.
    The rule is about factors of the form (x − c). The factor x2 + 4 is never 0, because x2 is never negative, so x2 + 4 is always 4 or more. It gives no zero at all.
    ✓ Instead: The only zero is x = 1, with multiplicity 1. The graph crosses there and meets the axis nowhere else.
    ✗ Not this: In f(x) = (2x − 6)2, the zero is 6.
    The zero is the input that makes the inside 0, and 2 · 6 − 6 = 6, not 0.
    ✓ Instead: Set 2x − 6 = 0, so x = 3. Check: f(3) = (6 − 6)2 = 0. The multiplicity is still 2, because (2x − 6)2 = 4(x − 3)2.
    ✗ Not this: A zero of multiplicity 3 means the graph crosses the x-axis three times.
    Multiplicity counts copies of one factor, and all the copies give the same zero. The graph meets the axis at that one place only.
    ✓ Instead: y = (x − 1)3 meets the x-axis once, at x = 1. It flattens there and crosses once.

    Tips and tricks

    • Memory device: odd goes through, even bounces. Bigger exponent, flatter landing.
    • The zero comes from inside the parentheses. The multiplicity is the exponent outside.
    • No exponent written means multiplicity 1. A bare x is the factor (x − 0), so x3 means a zero at 0 with multiplicity 3.
    • Check your count: add the multiplicities. When every factor has the form (x − c), apart from a number out front, the total equals the degree.
    • Check the behavior: plug in one number a little left of the zero and one a little right, with no other zero between them. Opposite signs mean it crossed. Matching signs mean it touched.
    • Finish the factoring before you read any exponent. A bracket such as x2 − 9 still hides two factors.
    • A number out front, such as −2, changes which side of the axis the graph is on. It never changes crossing into touching.

    7 The trap

    Wrong: cross at every zero. Right: cross at odd multiplicity and touch at even multiplicity.

    Keep in mind

    • What a test asks from this lesson: every zero with its multiplicity, and whether the graph crosses or touches there. The formula may be factored, or it may be a sum you must factor first.
    • Before you count: pull out the highest power of x every term shares, split any trinomial, and join powers of the same factor.
    • A bracket (ax + b)m gives one zero, the solution of ax + b = 0, with multiplicity m.

    Flash cards

    Say the answer out loud, then flip.

    What is the multiplicity of a zero?
    It is the number of times the factor for that zero appears in the factored form. In (x − 2)3(x + 1)2, the zero x = 2 has multiplicity 3 and the zero x = −1 has multiplicity 2.
    Think of the x-axis as the surface of a pond. What does the graph do at a zero with odd multiplicity, and at a zero with even multiplicity?
    • Odd: the graph crosses the x-axis, like a diving bird going through the surface.
    • Even: the graph touches and turns back, like a skipping stone that bounces off the surface and stays on the same side.
    In a fully factored formula with repeated factors combined, the factor (x + 4) appears with no exponent written. What is the multiplicity of its zero, and how does the graph pass through the x-axis there?
    • The multiplicity is 1, because in the combined form the factor appears exactly once.
    • The zero is x = −4, and the graph crosses there at a slant, without flattening.
    Why does an even multiplicity make the graph stay on the same side of the x-axis at x = c?
    • Left of c, x − c is negative. Right of c, it is positive.
    • An even power of a negative number is positive, so (x − c)m has the same sign on both sides.
    • The output does not change sign, so the graph touches and turns back.

    Sources

    1. Jay Abramson. Precalculus 2e, 3.4 Graphs of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

    From earlier

    Zeros from the factored form

    What is a zero of a polynomial, and where does it show up on the graph?
    Show answer
    It is an input that gives the output 0.
    On the graph, a real zero c marks the point (c, 0) where the curve meets the x-axis.

    Zeros from the factored form

    Why does one factor equal to 0 make the whole product 0?
    Show answer
    Zero times any number is 0.
    It works like holiday lights wired in a row: one burned-out bulb makes the whole string go dark.