What a zero remainder means
Quick review (2 minutes)
The big picture. Use division to decide whether an expression is a factor.
If a division gives remainder 0, the divisor is a factor of the dividend, and dividend = divisor × quotient. If the remainder is not 0, the divisor is not a factor. For a divisor x − c, with P(x) standing for the dividend and Q(x) for the quotient: remainder 0 means P(x) = (x − c) · Q(x).
Use the synthetic-division rule to test the proposed factor x − 4 of + 3 − 18x − 40. Put 4 in the box: x = 4 makes the divisor zero, since 4 − 4 = 0. Write the complete coefficient row 1, 3, −18, −40.
Use bring down, multiply, add: bring down 1, multiply 1 × 4 = 4, and add 3 + 4 = 7. This starts the quotient row one power below the cubic dividend.
Repeat multiply, add: 7 × 4 = 28 and −18 + 28 = 10; then 10 × 4 = 40 and −40 + 40 = 0. Using each newest bottom number gives the bottom row 1, 7, 10, 0.
Use the zero-remainder rule: the last entry is 0, so x − 4 is a factor. The other entries give quotient + 7x + 10. Write + 3 − 18x − 40 = (x − 4)( + 7x + 10) because the division identity has no leftover term.
Use the quadratic factoring rule: find two numbers whose product is 10 and whose sum is 7. They are 2 and 5, so + 7x + 10 = (x + 2)(x + 5). Keep the original divisor to get (x − 4)(x + 2)(x + 5); every factor is linear.
Check by multiplication: (x − 4)(x + 2) = − 2x − 8. Then ( − 2x − 8)(x + 5) = + 5 − 2 − 10x − 8x − 40 = + 3 − 18x − 40. This recovers every coefficient of the original polynomial.
Divide by the proposed factor, with zeros for missing powers.
Check the remainder. If it is nonzero, the proposed factor fails.
If it is zero, write the dividend as divisor × quotient.
Factor each piece further where it factors, with integers unless the question says otherwise.
Keep all factors, including the original divisor, and multiply back.
Show that x − 4 is a factor of + 3 − 18x − 40. Then factor + 3 − 18x − 40 completely.
x − 4 is a factor, because the remainder is 0.
+ 3 − 18x − 40 = (x − 4)(x + 2)(x + 5)
Wrong: give only the factored quotient. Right: include the divisor too, so the product rebuilds the original polynomial.
Read c from the marked point (c, 0) on the horizontal axis.
Substitute c in the given quadratic. If it is zero, another fact is needed to determine the remaining factor.
Write x − c beside the given quadratic factor.
Match the leading coefficient: divide the cubic's leading coefficient by the quadratic's leading coefficient for the outside multiplier.
Expand to check the degree, leading coefficient and marked intercept.
dividend
The thing being divided: the amount you start with. In long division it sits under the bar.
divisor
The thing you divide by. It says how many groups to make, or how big each group is. It can never be zero.
quotient
The main answer to a division: how many times the divisor fits into the dividend.
remainder
What is left over after the divisor has been taken out as many times as it fits. For polynomials, it is 0 or its degree is lower than the degree of the divisor.
synthetic division
A shortcut for dividing a polynomial by x − c. You write only the coefficients, then multiply by c and add, one column at a time.
division algorithm
The fact that every division can be written as dividend = divisor × quotient + remainder, where the remainder is 0 or has lower degree than the divisor.
1 In plain words
The big picture. Use division to decide whether an expression is a factor. A zero remainder means the divisor fits exactly. Build on the earlier division methods, then factor the quotient further. These factors prepare you to find zeros of polynomial functions in the next unit.
A factor makes an exact fit. Think of filling boxes with nothing left on the table. In polynomial division, a zero remainder means the divisor fits exactly: the dividend equals divisor × quotient. Those are two factors of the original polynomial. Look at the quotient next; it may split into smaller factors.
2 Picture it
Reminder
Reminder: What a factor is, The division algorithm, The number used in synthetic division, Zeros for missing terms, Factoring + bx + c, Multiplying signed numbers, Multiplying two binomials
- What a factor is. A factor is one of the pieces multiplied together to make a product: 3 and 4 are factors of 12 because 3 × 4 = 12.
- The division algorithm. dividend = divisor × quotient + remainder. For 17 ÷ 5: 17 = 5 × 3 + 2.
- The number used in synthetic division. Dividing by x − c uses c. Dividing by x + 3 uses −3, because x + 3 = x − (−3).
- Zeros for missing terms. Write a 0 for each missing power before dividing: − 13x − 12 has coefficients 1, 0, −13, −12.
- Factoring + bx + c. Find two numbers that multiply to c and add to b. For + 7x + 10 they are 2 and 5, so + 7x + 10 = (x + 2)(x + 5).
- Multiplying signed numbers. Same signs give a positive, different signs give a negative: (−3)(−3) = 9 and (−4)(2) = −8.
- Multiplying two binomials. Multiply each term of the first by each term of the second, then collect like terms: (x − 3)(x + 5) = + 5x − 3x − 15 = + 2x − 15.
3 Why
The division identity is dividend = divisor × quotient + remainder. When the remainder is zero, only the product remains. That makes the divisor a factor. Conversely, a polynomial written as divisor × quotient divides with nothing left over. A nonzero remainder prevents that exact product.
4 The rule
If a division gives remainder 0, the divisor is a factor of the dividend, and dividend divisor quotient.
If the remainder is not 0, the divisor is not a factor. For a divisor , with P(x) standing for the dividend and Q(x) for the quotient: remainder 0 means .
The same idea, five ways
x minus c goes into the polynomial evenly. Or: x minus c divides it with nothing left over.
The divisor is a factor of the dividend because the remainder of the division is zero.
- dividend = divisor × quotient + 0
- dividend = divisor × quotient
- = Q(x) for x ≠ c, with remainder 0
24 eggs fill 4 cartons of 6 with no egg left on the table, so 24 = 6 × 4.
remainder = 0
dividend = divisor × quotient
the divisor is a factor
remainder ≠ 0: not a factor
The same idea, other ways
Draw a rectangle whose area is the dividend. Make one side the divisor. If the remainder is 0, the other side is the quotient and the rectangle is filled exactly, with no extra strip hanging off the edge. Side times side equals area, so divisor × quotient = dividend.
12 ÷ 3 = 4 with remainder 0, so 12 = 3 × 4 and 3 is a factor of 12. 14 ÷ 3 = 4 with remainder 2, so 14 = 3 × 4 + 2. The extra + 2 is what stops 3 from being a factor of 14. A polynomial division reads the same way: remainder 0 means a clean multiplication, any other remainder means a multiplication plus an extra piece.
A baker packs rolls into bags of 6. If the last bag comes out full and the tray is empty, the number of rolls is 6 times the number of bags. If rolls are still on the tray, it is not. The rolls on the tray are the remainder. An empty tray is a remainder of 0, and it tells you the bag size is a factor of the total.
Start from the division algorithm: dividend = divisor × quotient + remainder. Adding 0 changes nothing, so with remainder 0 the line reads dividend = divisor × quotient. A factor is one of the pieces in a multiplication. The divisor is one of the pieces in this multiplication. So the divisor is a factor.
In synthetic division, look at the last number of the bottom row before anything else. If it is 0, the divisor x − c is a factor, and the other numbers in the bottom row are the coefficients of the other factor. If it is anything else, x − c is not a factor.
| Division | Remainder | What it tells you | How to write the dividend |
|---|---|---|---|
| 12 ÷ 3 | 0 | 3 is a factor of 12 | 12 = 3 × 4 |
| 14 ÷ 3 | 2 | 3 is not a factor of 14 | 14 = 3 × 4 + 2 |
| 0 | x − 3 is a factor | ||
| 2 | x − 3 is not a factor |
Part 1: The graph gives a factor
An x-intercept is a point on the horizontal axis, where the output is zero. Think of that axis as sea level. If its input is c, then x − c is a factor. With a given quadratic factor and the cubic's leading coefficient, you can recover the remaining linear factor.
- Why: P(x) = (x − c)Q(x) + R gives P(c) = R. A point (c, 0) means remainder zero.
- Use this method when the given quadratic is nonzero at c. If it also vanishes there, this point alone does not determine the remaining factor.
What it asks: write a cubic in factored form from its graph
- Read c from the marked point (c, 0) on the horizontal axis.
- Substitute c in the given quadratic. If it is zero, another fact is needed to determine the remaining factor.
- Write x − c beside the given quadratic factor.
- Match the leading coefficient: divide the cubic's leading coefficient by the quadratic's leading coefficient for the outside multiplier.
- Expand to check the degree, leading coefficient and marked intercept.
Worked example
Read a factor from a graph
The graph shows a cubic with leading coefficient 2. One factor is + 4x + 16. Use the marked x-intercept to write the cubic in factored form.
What it asks. Find the missing linear factor and the multiplier for the cubic.
Show the steps and the answer
The plan. Read the marked x-intercept, pair its factor with the given quadratic, then match the leading coefficient.
- Plan. Read the marked x-intercept, pair its factor with the given quadratic, then match the leading coefficient.
- At an x-intercept the output is zero. An input c gives the factor x − c.
- The leading coefficients of the factors must multiply to the given leading coefficient.
- Read the marked point (4, 0). The input is 4, so is a factor.On the horizontal axis the output is zero. In P(c) = (c − c)Q(c) + R, only R remains, so R = 0.
- The given quadratic starts with . Multiplying it by would start with . Multiply the product by 2 to obtain the required .The degrees 2 and 1 add to 3. The leading coefficients must multiply to the given cubic coefficient.
- Write .Keep the given quadratic and the linear factor together, with the required multiplier.
- Expanded check: 2 − 128
- The factors may be written in any order.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Trick: multiply the outside multiplier by the factors' constant terms. The product is the graph's y-intercept.
5 How
- Use the synthetic-division rule to test the proposed factor x − 4 of + 3 − 18x − 40. Put 4 in the box: x = 4 makes the divisor zero, since 4 − 4 = 0. Write the complete coefficient row 1, 3, −18, −40.
- Use bring down, multiply, add: bring down 1, multiply 1 × 4 = 4, and add 3 + 4 = 7. This starts the quotient row one power below the cubic dividend.
- Repeat multiply, add: 7 × 4 = 28 and −18 + 28 = 10; then 10 × 4 = 40 and −40 + 40 = 0. Using each newest bottom number gives the bottom row 1, 7, 10, 0.
- Use the zero-remainder rule: the last entry is 0, so x − 4 is a factor. The other entries give quotient + 7x + 10. Write + 3 − 18x − 40 = (x − 4)( + 7x + 10) because the division identity has no leftover term.
- Use the quadratic factoring rule: find two numbers whose product is 10 and whose sum is 7. They are 2 and 5, so + 7x + 10 = (x + 2)(x + 5). Keep the original divisor to get (x − 4)(x + 2)(x + 5); every factor is linear.
- Check by multiplication: (x − 4)(x + 2) = − 2x − 8. Then ( − 2x − 8)(x + 5) = + 5 − 2 − 10x − 8x − 40 = + 3 − 18x − 40. This recovers every coefficient of the original polynomial.
What it asks: test a factor and finish factoring
- Divide by the proposed factor, with zeros for missing powers.
- Check the remainder. If it is nonzero, the proposed factor fails.
- If it is zero, write the dividend as divisor × quotient.
- Factor each piece further where it factors, with integers unless the question says otherwise.
- Keep all factors, including the original divisor, and multiply back.
6 Worked example
Worked example
Show a factor, then factor completely
Show that x − 4 is a factor of + 3 − 18x − 40. Then factor + 3 − 18x − 40 completely.
What it asks. Confirm the proposed factor and factor the whole polynomial.
Show the steps and the answer
The plan. Divide by x − 4, check for remainder zero, then factor the quadratic quotient and multiply all factors back.
Dividing by x − 4: use c = 4
Top row: 1 3 −18 −40
Middle row: 4 28 40
Bottom row: 1 7 10 0
Quotient: + 7x + 10
Remainder: 0, so x − 4 is a factor
- Plan. Divide by x − 4, check for remainder zero, then factor the quadratic quotient and multiply all factors back.
- Say what the question asks. Show that is a factor means: divide by and get remainder 0. Factor completely means: write the polynomial as a product of pieces that cannot be split again.Knowing the target tells you when to stop: a remainder of 0 for the first part, no more splitting for the second.
- Choose the method and the number. The divisor has the form with , so use synthetic division with 4.Synthetic division is built for a divisor of the form x − c. The number 4 is the one that makes the divisor equal 0: 4 − 4 = 0.
- Write the coefficients of the dividend in descending powers as the top row: 1, 3, .The dividend has an term, an term, an x term and a constant, so no power is missing and no 0 is needed.
- Bring down the 1. Multiply 1 × 4 = 4, write it under the 3, and add: .Each new bottom number is the top number plus 4 times the bottom number before it.
- Multiply 7 × 4 = 28, write it under the −18, and add: .Same move, one column to the right.
- Multiply , write it under the , and add: . The bottom row is 1, 7, 10, 0.The last number of the bottom row is the remainder, and here it is 0.
- Read the bottom row: the remainder is 0 and the quotient is .The numbers before the last one are the coefficients of the quotient, and the quotient starts one degree below the dividend, so drops to .
- Write the multiplication: .The division algorithm says dividend = divisor × quotient + remainder, and the remainder is 0. This shows x − 4 is a factor.
- Factor the quotient . Look for two numbers that multiply to 10 and add to 7. They are 2 and 5, so .2 × 5 = 10 and 2 + 5 = 7, which match the last number and the middle number of the quotient.
- Put every piece in one product: .The divisor stays in the answer because it is one of the factors. Each piece now has degree 1, so nothing can be split again.
- x − 4 is a factor, because the remainder is 0.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 8
Whole numbers first
Is 7 a factor of 91? If it is, write 91 as a multiplication.
What it asks. Use the remainder to decide whether the proposed divisor is a factor.
Show the steps and the answer
The plan. Divide the whole number and look for remainder zero. Check by multiplication.
- Plan. Divide the whole number and look for remainder zero. Check by multiplication.
- Say what the question asks: divide 91 by 7 and see whether anything is left over.A factor is a number that divides with remainder 0.
- Divide the tens. 7 goes into 9 one time. , and .Long division works from the left digit.
- Bring down the 1 to make 21. 7 goes into 21 three times. , and .The 2 left from the tens joins the next digit.
- Read the result: quotient 13, remainder 0. So .dividend = divisor × quotient + remainder, and the remainder is 0.
- Yes, 7 is a factor of 91.
- 91 = 7 × 13
Rung 2 of 8
A quadratic and a divisor x − c
Is x − 3 a factor of + 2x − 15? If it is, write + 2x − 15 in factored form.
What it asks. Use the remainder to decide whether the proposed divisor is a factor.
Show the steps and the answer
The plan. Use 3 in the box. A zero remainder lets you write divisor × quotient.
Dividing by x − 3: use c = 3
Top row: 1 2 −15
Middle row: 3 15
Bottom row: 1 5 0
Quotient: x + 5
Remainder: 0
- Plan. Use 3 in the box. A zero remainder lets you write divisor × quotient.
- Say what the question asks: divide by and see whether the remainder is 0.Remainder 0 is the test for a factor.
- The divisor is , so use synthetic division with . The top row is 1, 2, .3 is the number that makes x − 3 equal 0: 3 − 3 = 0. No power of x is missing in the dividend.
- Bring down the 1. Multiply 1 × 3 = 3 and add: .Each bottom number is the top number plus 3 times the bottom number before it.
- Multiply and add: . The bottom row is 1, 5, 0.The last bottom number is the remainder.
- Read the result: remainder 0, quotient . Write .With remainder 0, dividend = divisor × quotient. The quotient starts one degree below , so 1, 5 means x + 5.
- Yes, x − 3 is a factor.
Rung 3 of 8
The remainder is not zero
Is x − 2 a factor of − 4 + x + 5?
What it asks. Use the remainder to decide whether the proposed divisor is a factor.
Show the steps and the answer
The plan. Use 2 in the box and read the remainder before deciding whether the divisor is a factor.
Dividing by x − 2: use c = 2
Top row: 1 −4 1 5
Middle row: 2 −4 −6
Bottom row: 1 −2 −3 −1
Remainder: −1, not 0
x − 2 is not a factor
- Plan. Use 2 in the box and read the remainder before deciding whether the divisor is a factor.
- Say what the question asks: divide by and see whether the remainder is 0.Only a remainder of exactly 0 means factor.
- Use synthetic division with . The top row is 1, , 1, 5.The divisor is x − 2, and every power from down to the constant is present.
- Bring down the 1. Multiply 1 × 2 = 2 and add: .Top number plus 2 times the bottom number before it.
- Multiply −2 × 2 = −4 and add: .Same move, next column. A negative times a positive is negative.
- Multiply and add: . The bottom row is 1, .The last bottom number is the remainder.
- Read the result: the remainder is , not 0. So is not a factor. The honest statement is .The division algorithm still holds, but the extra − 1 means the dividend is not a plain multiplication by x − 2.
- No. The remainder is −1, so x − 2 is not a factor.
Rung 4 of 8
A divisor x + c and a missing term
Show that x + 3 is a factor of − 13x − 12. Then factor − 13x − 12 completely.
What it asks. Confirm the proposed factor and factor completely.
Show the steps and the answer
The plan. Use −3 in the box with a zero for the missing term. Factor the quadratic quotient.
Dividing by x + 3: use c = −3
Top row: 1 0 −13 −12
Middle row: −3 9 12
Bottom row: 1 −3 −4 0
Quotient: − 3x − 4
Remainder: 0
- Plan. Use −3 in the box with a zero for the missing term. Factor the quadratic quotient.
- Say what the question asks: divide by , get remainder 0, then keep splitting until no piece can be split again.Remainder 0 proves the factor, and completely means no piece is left that still factors.
- Find the number for synthetic division. Write as , so .Synthetic division uses the number that makes the divisor 0, and −3 + 3 = 0.
- Write the top row with a 0 for the missing term: 1, 0, . − 13x − 12 is + 0 − 13x − 12. Without the 0, every later number lands in the wrong column.
- Bring down the 1. Multiply 1 × (−3) = −3 and add: .Top number plus −3 times the bottom number before it.
- Multiply −3 × (−3) = 9 and add: .A negative times a negative is positive.
- Multiply and add: . The bottom row is 1, , 0.The last bottom number is the remainder, and it is 0, so x + 3 is a factor.
- Write .Remainder 0 gives dividend = divisor × quotient, and 1, −3, −4 are the coefficients of the quotient starting at .
- Factor . Two numbers that multiply to and add to are and 1. So .−4 × 1 = −4 and −4 + 1 = −3.
- Write every factor: .The divisor x + 3 is a factor and stays in the answer.
- x + 3 is a factor, because the remainder is 0.
Rung 5 of 8
The quotient does not factor again
Show that x − 1 is a factor of + 2x − 3. Then factor + 2x − 3 as far as it will go using integers.
What it asks. Confirm the proposed factor and factor as far as integers allow.
Show the steps and the answer
The plan. Use 1 in the box. Check whether any integer factor pair gives the quadratic quotient.
Dividing by x − 1: use c = 1
Top row: 1 0 2 −3
Middle row: 1 1 3
Bottom row: 1 1 3 0
Quotient: + x + 3
Remainder: 0
- Plan. Use 1 in the box. Check whether any integer factor pair gives the quadratic quotient.
- Say what the question asks: divide by , get remainder 0, then split the quotient if it can be split.Remainder 0 proves the factor. The quotient may or may not factor again.
- Use synthetic division with . Write a 0 for the missing term: the top row is 1, 0, 2, . + 2x − 3 is + 0 + 2x − 3.
- Bring down the 1. Multiply 1 × 1 = 1 and add: .Top number plus 1 times the bottom number before it.
- Multiply 1 × 1 = 1 and add: .Same move, next column.
- Multiply and add: . The bottom row is 1, 1, 3, 0.The remainder is 0, so x − 1 is a factor.
- Write .Remainder 0 gives dividend = divisor × quotient.
- Try to factor . You need two integers that multiply to 3 and add to 1. The only pairs that multiply to 3 are 1 and 3, which add to 4, and and , which add to .Neither pair adds to 1, so no integers work.
- Stop. The answer is .A quotient that does not factor is left as it is. The zero remainder still gave one true factor.
- x − 1 is a factor, because the remainder is 0.
- + 2x − 3 = (x − 1)( + x + 3), and + x + 3 does not factor with integers.
Rung 6 of 8
A divisor of degree two
Show that + 1 is a factor of + 2 − 2 + 2x − 3. Then factor + 2 − 2 + 2x − 3 completely.
What it asks. Confirm the proposed factor and factor completely.
Show the steps and the answer
The plan. Use long division by the quadratic. If the remainder is zero, factor the quotient and keep the divisor.
- Plan. Use long division by the quadratic. If the remainder is zero, factor the quotient and keep the divisor.
- Say what the question asks: divide by , get remainder 0, then split the quotient as far as it goes.The zero remainder test works for any divisor, not only x − c.
- Choose long division, and write the divisor as .This synthetic table handles linear divisors; a quadratic needs long division. The 0x keeps the columns lined up.
- Match leading terms: . Multiply . Subtract from to get . Bring down 2x: . is the piece of the quotient that removes the term. Note −2 − = −3.
- Match leading terms: . Multiply . Subtract to get . Bring down : .2x removes the term, and 2x − 2x = 0x.
- Match leading terms: . Multiply . Subtract to get 0.Nothing is left, so the remainder is 0 and + 1 is a factor.
- Write .The quotient is + 2x − 3 and the remainder is 0, so dividend = divisor × quotient.
- Factor . Two numbers that multiply to and add to 2 are 3 and . So .3 × (−1) = −3 and 3 + (−1) = 2.
- Test the same way. It is , so you need two integers that multiply to 1 and add to 0. The integer pairs are 1 and 1, which add to 2, and and , which add to . Neither works, so does not factor with integers and stays.Factor completely means checking every piece, including the divisor.
- Write every factor: .No piece can be split again.
- + 1 is a factor, because the remainder is 0.
Rung 7 of 8
Graph practice: negative intercept
The graph shows a cubic with leading coefficient 1. One factor is − 5x + 25. Use the marked x-intercept to write the cubic in factored form.
What it asks. Use the marked intercept and given factor to write the cubic as a product.
Show the steps and the answer
The plan. The marked intercept is negative. Subtracting a negative number adds, so the factor x − c has a plus sign. Keep the given quadratic.
- Plan. The marked intercept is negative. Subtracting a negative number adds, so the factor x − c has a plus sign. Keep the given quadratic.
- At an x-intercept the output is zero. An input c gives the factor x − c.
- The leading coefficients of the factors must multiply to the given leading coefficient.
- Read the marked point . The input is , so is a factor.On the horizontal axis the output is zero. In P(c) = (c − c)Q(c) + R, only R remains, so R = 0.
- The given quadratic has leading coefficient 1. Use multiplier 1.The degrees 2 and 1 add to 3. The leading coefficients must multiply to the given cubic coefficient.
- Write .Keep the given quadratic and the linear factor together, with the required multiplier.
- Expanded check: + 125
- The factors may be written in any order.
Rung 8 of 8
Graph practice: match the scale
The graph shows a cubic with leading coefficient 3. One factor is + 2x + 4. Use the marked x-intercept to write the cubic in factored form.
What it asks. Use the marked intercept and given factor to write the cubic as a product.
Show the steps and the answer
The plan. Read the x-intercept, form x − c, and match the cubic's leading coefficient with an outside multiplier.
- Plan. Read the x-intercept, form x − c, and match the cubic's leading coefficient with an outside multiplier.
- At an x-intercept the output is zero. An input c gives the factor x − c.
- The leading coefficients of the factors must multiply to the given leading coefficient.
- Read the marked point (2, 0). The input is 2, so is a factor.On the horizontal axis the output is zero. In P(c) = (c − c)Q(c) + R, only R remains, so R = 0.
- The given quadratic has leading coefficient 1. Use multiplier 3.The degrees 2 and 1 add to 3. The leading coefficients must multiply to the given cubic coefficient.
- Write .Keep the given quadratic and the linear factor together, with the required multiplier.
- Expanded check: 3 − 24
- The factors may be written in any order.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Trick: to test x − c without finding the quotient, evaluate the dividend at c. A zero result confirms the factor.
- For complete factoring, division supplies the quotient you must factor next.
- The degrees of all factors must add to the dividend's degree.
- The factors' constant terms must multiply to the dividend's constant term.
- A matching input is a spot check. Expanding the product checks every coefficient.
7 The trap
Wrong: give only the factored quotient. Right: include the divisor too, so the product rebuilds the original polynomial.
Keep in mind
- For a test, use a zero remainder to factor completely. Given a cubic graph and a quadratic factor, read the missing linear factor from an x-intercept and match the leading coefficient.
Flash cards
Say the answer out loud, then flip.
You divide a polynomial by x − c and the remainder is 0. What does that tell you?
A division leaves a remainder that is not 0. Is the divisor a factor, and what do you write?
- No, the divisor is not a factor. The remainder is the amount that spoils the exact fit, like 2 eggs left on the table.
- Write dividend = divisor × quotient + remainder and stop.
Why does a remainder of 0 make the divisor a factor?
Dividing + 3 − 18x − 40 by x − 4 gives remainder 0, and the quotient factors into (x + 2)(x + 5). What is the complete factored form, and how do you check that no factor is missing?
- (x − 4)(x + 2)(x + 5). The divisor is one of the factors, so it must be in the answer.
- Check by counting degrees: 1 + 1 + 1 = 3, which matches the degree of the dividend.