The Intermediate Value Theorem
Quick review (2 minutes)
The big picture. Locate a zero even when factoring is difficult.
Intermediate Value Theorem, zero version: let f be a polynomial and let a < b. If f(a) and f(b) have opposite signs, then there is at least one number c with a < c < b and f(c) = 0. General version: f takes every value between f(a) and f(b) at some input between a and b.
Check the Intermediate Value Theorem’s condition for f(x) = + x − 3 on 1 ≤ x ≤ 2. It is a polynomial, so its graph is unbroken throughout this interval.
Evaluate both endpoints by substitution: f(1) = 1 + 1 − 3 = −1 and f(2) = 8 + 2 − 3 = 7. These outputs put one endpoint below the axis and the other above it.
Apply the theorem: the opposite signs guarantee at least one zero between 1 and 2. They do not identify an exact zero or prove there is only one.
To narrow the interval to consecutive tenths, test f(1.1) = −0.569, f(1.2) = −0.072 and f(1.3) = 0.497. Apply the same sign-change rule to 1.2 and 1.3: at least one zero lies between them. Matching signs at 1.1 and 1.2 alone give no conclusion about that smaller interval.
Check with the theorem’s general version: f(x) = 0 means + x = 3. At 1.2, + x = 2.928; at 1.3, it is 3.497. The unbroken graph reaches 3 between those inputs, confirming the same interval.
A sign change guarantees at least one zero. It does not give the exact zero, and it does not show there is only one.
Let f(x) = + x − 3.
(a) Show that f has a zero between 1 and 2.
(b) Find two tenths next to each other, such as 1.6 and 1.7, that the zero lies between.
(a) f(1) = −1 is negative and f(2) = 7 is positive, so f has at least one zero between 1 and 2.
(b) The zero is between 1.2 and 1.3.
Wrong: matching endpoint signs mean no zero. Right: matching signs give no conclusion.
Confirm the graph is unbroken throughout the interval; a polynomial is.
Compute the output at each end. Work out a power before the minus sign in front of it.
An output of zero gives an exact zero. Otherwise compare signs.
Opposite signs guarantee at least one zero between the inputs; matching signs give no conclusion.
Read the table in increasing input order.
Mark positive, negative or zero beside every output.
Record each neighboring pair with opposite signs.
Report exact zero entries separately; equal signs give no conclusion.
Start with two outputs of opposite signs.
Choose an input inside the interval and evaluate it.
If the output is zero, report that exact zero.
Otherwise keep the smaller interval whose endpoint signs differ.
Repeat to the requested precision and state the final interval.
Move the target to the left side and call that expression a new function.
Check that the new function is a polynomial.
Evaluate it at both endpoints.
Opposite signs prove it has a zero, which solves the original equation.
zero of a polynomial
An input that makes the polynomial's output equal 0. On the graph, it is a place where the curve meets the x-axis.
multiplicity
The number of times the same factor appears in the factored form: the exponent on that factor. It decides whether the graph crosses the x-axis or only touches it.
Intermediate Value Theorem
If a polynomial's output is negative at one input and positive at another, the output must be 0 somewhere between them, because the graph is one unbroken curve.
1 In plain words
The big picture. Locate a zero even when factoring is difficult. The earlier lessons found exact zeros and described crossings. Here, opposite output signs guarantee a zero between two inputs because polynomial graphs are unbroken. Next, use that idea to check a sketch.
An unbroken trail going from below sea level to above it must pass through sea level. A polynomial’s graph is unbroken too. Opposite output signs force at least one zero between the inputs. The Intermediate Value Theorem gives this guarantee; intermediate means in between. It locates a zero without needing its exact value.
2 Picture it
Reminder
Reminder: Evaluating a polynomial, Powers of a negative number, Cubing a decimal, Zero of a polynomial, Sign and position, Multiplicity at a zero
- Evaluating a polynomial. Replace every x with the number, do the powers first, then multiply, then add and subtract. For f(x) = + x − 3, f(2) = + 2 − 3 = 8 + 2 − 3 = 7.
- Powers of a negative number. An odd power keeps the minus sign and an even power loses it: (−2 = −8 and (−2 = 4. Put the negative number in parentheses before you raise it to a power.
- Cubing a decimal. Multiply in two stages: = 1.2 × 1.2 × 1.2 = 1.44 × 1.2 = 1.728.
- Zero of a polynomial. A zero of a polynomial is an input c with f(c) = 0. On the graph a real zero c marks the point (c, 0), where the curve meets the x-axis. For f(x) = (x − 1)(x − 3), the zeros are 1 and 3.
- Sign and position. A positive output puts the point above the x-axis. A negative output puts it below. f(1) = −1 means the point (1, −1) is below the axis.
- Multiplicity at a zero. An odd multiplicity crosses the x-axis, so the sign changes there. An even multiplicity touches and turns, so the sign stays the same: (x − 2 is positive on both sides of 2.
3 Why
Polynomial outputs change without jumps or gaps. An unbroken curve joining a point below the x-axis to one above it must meet the axis. Equal signs give no such guarantee: the curve could stay on one side or cross and return.
4 The rule
Intermediate Value Theorem, zero version: let f be a polynomial and let a < b.
If f(a) and f(b) have opposite signs, then there is at least one number c with a < c < b and .source 1 General version: f takes every value between f(a) and f(b) at some input between a and b.source 1
Sources (1)
- Jay Abramson. Precalculus 2e, 3.4 Graphs of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.
The same idea, five ways
If the outputs at two inputs have opposite signs, the polynomial has a zero somewhere between those two inputs.
A polynomial that is negative at one input and positive at another must equal 0 at some input between them.
- If a < b and f(a) < 0 < f(b), then f(c) = 0 for some c with a < c < b
- If a < b and f(a) > 0 > f(b), then f(c) = 0 for some c with a < c < b
- Opposite signs test: f(a) · f(b) < 0
- The zero c is in the interval (a, b)
- Graph words: the curve meets the x-axis somewhere between x = a and x = b
An elevator that goes from basement level 2 up to floor 5 has to pass the ground floor on the way.
The same idea, other ways
Put a dot below the x-axis and a dot above it. Now join the dots without lifting your pencil. A straight path crosses the axis once. A wiggly path crosses it too, maybe several times. No unbroken path can get from below to above and miss the axis. The crossing point's x-value is a zero.
An elevator starts at basement level 2 and ends at floor 5. It never teleports, so at some moment it passes the ground floor, level 0. You were not watching, and you still know it happened. The clock times are the inputs, the levels are the outputs, and a moment when the elevator is at level 0 is a zero.
Take f(x) = − 2. At x = 1 the output is 1 − 2 = −1, which is negative. At x = 2 the output is 4 − 2 = 2, which is positive. So a zero sits between 1 and 2. It is the number whose square is 2, which is ≈ 1.414 (rounded), and 1.414 is between 1 and 2.
Take f(x) = + x − 3. At x = 1 the output is −1. At x = 2 the output is 7. As x slides from 1 to 2, the output slides from −1 to 7 without skipping any number, because the graph has no breaks. The number 0 sits between −1 and 7, so the output lands on 0 at some x along the way.
Opposite signs: a zero between. Same signs: no promise. One output equal to 0: you already found a zero.
| Signs of f(a) and f(b) | What the theorem tells you | What it does not tell you |
|---|---|---|
| Opposite, such as − and + | At least one zero lies between a and b | How many zeros there are, or exactly where |
| Same, such as + and + | Nothing about zeros | It does not say there is no zero between a and b |
| One output is exactly 0 | That input is already a zero | Whether other zeros lie between a and b |
Part 1: Read or compute endpoint signs
What it asks: Prove a zero lies between two given inputs.
The table evaluates f(x) = + x − 3. Read the output sign at each input.
The plan
- Confirm the graph is unbroken throughout the interval; a polynomial is.
- Compute the output at each end. Work out a power before the minus sign in front of it.
- An output of zero gives an exact zero. Otherwise compare signs.
- Opposite signs guarantee at least one zero between the inputs; matching signs give no conclusion.
Tips and tricks
- Trap: A minus sign before an even power stays outside the power.
- Trick: Once the outputs are computed, their signs decide the theorem.
Part 2: Read several intervals from a table
What it asks: Find every guaranteed interval between neighboring table inputs.
The table evaluates p(x) = − 4x + 1. Each neighboring sign change gives an interval.
The plan
- Read the table in increasing input order.
- Mark positive, negative or zero beside every output.
- Record each neighboring pair with opposite signs.
- Report exact zero entries separately; equal signs give no conclusion.
Tips and tricks
- Trap: Skipping a table column combines intervals that should be checked separately.
- Trick: Mark signs first, then scan only for sign changes.
Part 3: Narrow a zero’s location
What it asks: Trap a zero to the requested interval width.
Use the table for f(x) = + x − 3 to keep the sign-changing pair of tenths.
The plan
- Start with two outputs of opposite signs.
- Choose an input inside the interval and evaluate it.
- If the output is zero, report that exact zero.
- Otherwise keep the smaller interval whose endpoint signs differ.
- Repeat to the requested precision and state the final interval.
Tips and tricks
- Trap: Choosing an interval by closeness alone can discard the zero.
- Trick: Keep the sign-changing pair after every calculation.
Part 4: An equation with a nonzero target
What it asks: Prove a solution exists when the equation does not equal zero.
The new function measures the difference between the two sides. Its zero means they are equal.
The plan
- Move the target to the left side and call that expression a new function.
- Check that the new function is a polynomial.
- Evaluate it at both endpoints.
- Opposite signs prove it has a zero, which solves the original equation.
Tips and tricks
- Trap: Testing the original outputs against zero ignores the target.
- Trick: Subtract the target before doing the sign test.
5 How
- Check the Intermediate Value Theorem’s condition for f(x) = + x − 3 on 1 ≤ x ≤ 2. It is a polynomial, so its graph is unbroken throughout this interval.
- Evaluate both endpoints by substitution: f(1) = 1 + 1 − 3 = −1 and f(2) = 8 + 2 − 3 = 7. These outputs put one endpoint below the axis and the other above it.
- Apply the theorem: the opposite signs guarantee at least one zero between 1 and 2. They do not identify an exact zero or prove there is only one.
- To narrow the interval to consecutive tenths, test f(1.1) = −0.569, f(1.2) = −0.072 and f(1.3) = 0.497. Apply the same sign-change rule to 1.2 and 1.3: at least one zero lies between them. Matching signs at 1.1 and 1.2 alone give no conclusion about that smaller interval.
- Check with the theorem’s general version: f(x) = 0 means + x = 3. At 1.2, + x = 2.928; at 1.3, it is 3.497. The unbroken graph reaches 3 between those inputs, confirming the same interval.
Keep the guarantee precise
- A sign change guarantees at least one zero. It does not give the exact zero, and it does not show there is only one.
6 Worked example
Worked example
Trapping a zero that factoring does not find
Let f(x) = + x − 3.
(a) Show that f has a zero between 1 and 2.
(b) Find two tenths next to each other, such as 1.6 and 1.7, that the zero lies between.
What it asks. Prove a zero exists and narrow its location to consecutive tenths.
Show the steps and the answer
The plan. Find opposite signs, then test tenths and keep a sign-changing pair.
- Plan. Find opposite signs, then test tenths and keep a sign-changing pair.
- Say what the question asks. A zero is an input whose output is 0. Part (a) asks you to prove such an input exists between 1 and 2. Part (b) asks you to shrink that stretch to one tenth wide.This polynomial has no factoring that falls out by grouping, so you cannot read the zero from brackets. The Intermediate Value Theorem lets you trap it instead.
- Note that f is a polynomial.A polynomial has an unbroken graph, which is what the theorem needs.
- Compute . Sign: .Replace every x with 1. The output is negative, so the graph is below the x-axis at x = 1.
- Compute . Sign: .Replace every x with 2. The output is positive, so the graph is above the x-axis at x = 2.
- Conclude part (a): f(1) < 0 and f(2) > 0, so f has at least one zero between 1 and 2.Opposite signs at the two ends of an unbroken curve force a crossing between them.
- Decide where to test next. The output is much closer to 0 than the output 7, so start near .This is a hint for where to look first, not a guarantee. It saves work when it is right.
- Compute . Sign: . = 1.1 × 1.1 × 1.1 = 1.331. The output is still negative, so the zero is to the right of 1.1.
- Compute . Sign: . = 1.44 × 1.2 = 1.728. Still negative, but very close to 0.
- Compute . Sign: . = 1.69 × 1.3 = 2.197. The sign has flipped to positive.
- Conclude part (b): the sign flips between the columns under 1.2 and 1.3 in the table, so the zero is between 1.2 and 1.3.f(1.2) < 0 and f(1.3) > 0, and the theorem applies to this shorter stretch the same way.
- (a) f(1) = −1 is negative and f(2) = 7 is positive, so f has at least one zero between 1 and 2.
- (b) The zero is between 1.2 and 1.3.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 9
Two outputs, read the signs
A polynomial g has g(2) = −5 and g(3) = 4. Another polynomial h has h(2) = 6 and h(3) = 4. For each one, does the Intermediate Value Theorem promise a zero between 2 and 3?
What it asks. Use endpoint signs to decide what the theorem guarantees.
Show the steps and the answer
The plan. Check that the graph is unbroken, find the output at each end, then compare the signs.
- Plan. Check that the graph is unbroken, find the output at each end, then compare the signs.
- Say what the question asks: is there surely an input between 2 and 3 whose output is 0?A zero of a polynomial is an input that gives output 0.
- For g, write the signs: is negative, is positive.Only the signs matter for the theorem.
- Conclude for g: the signs are opposite, so g has at least one zero between 2 and 3.g is a polynomial, so its graph is unbroken and must cross the x-axis on the way from below to above.
- For h, write the signs: is positive, is positive.Both points are above the x-axis.
- Conclude for h: the signs match, so the theorem promises nothing. There may be a zero between 2 and 3, or there may not.A curve can stay above the axis the whole way, or dip below and come back. Two points on the same side cannot tell you which.
- g: yes, at least one zero between 2 and 3.
- h: no promise either way.
Rung 2 of 9
Reading sign changes from a table
The table shows values of the polynomial p(x) = − 4x + 1. Between which neighboring inputs in the table must p have a zero?
What it asks. List guaranteed intervals between neighboring table inputs.
Show the steps and the answer
The plan. Read output signs left to right and record each change.
- Plan. Read output signs left to right and record each change.
- Say what the question asks: no output in the table is 0, so look for neighbors in the output row with opposite signs.Each pair of neighbors with opposite signs traps a zero between their inputs.
- Write the sign of each output, left to right: .The outputs are −14, 1, 4, 1, −2, 1, 16.
- Mark the flips. The sign changes from the column under to the column under , from the column under 0 to the column under 1, and from the column under 1 to the column under 2.Those are the three places where a − sits next to a +.
- Conclude: p has at least one zero in each of those three stretches.p is a polynomial, so the theorem applies to each pair of neighbors separately.
- Between −3 and −2.
- Between 0 and 1.
- Between 1 and 2.
Rung 3 of 9
Compute the two outputs yourself
Show that f(x) = 2 − 3 + 2x − 3 has a zero between 1 and 2.
What it asks. Use endpoint signs to decide what the theorem guarantees.
Show the steps and the answer
The plan. Check that the graph is unbroken, find the output at each end, then compare the signs.
- Plan. Check that the graph is unbroken, find the output at each end, then compare the signs.
- Say what the question asks: prove there is an input between 1 and 2 whose output is 0.You do not have to find the zero, only show that it exists.
- Compute . Sign: . = 1 and = 1, so each term is its coefficient.
- Compute . Sign: . = 8 and = 4. Powers first, then multiply, then add and subtract.
- Conclude: f(1) < 0 and f(2) > 0, and f is a polynomial, so f has at least one zero between 1 and 2.This is the Intermediate Value Theorem, zero version.
Rung 4 of 9
The same-sign trap
Let f(x) = (x − 1)(x − 3). Compute f(0) and f(4). Does the Intermediate Value Theorem say that f has no zero between 0 and 4?
What it asks. Decide what equal endpoint signs allow you to conclude.
Show the steps and the answer
The plan. Compute both outputs, then distinguish a guarantee from a claim that no zero exists.
- Plan. Compute both outputs, then distinguish a guarantee from a claim that no zero exists.
- Say what the question asks: the two outputs will tell you the signs at the ends. Then decide what, if anything, the theorem says.The theorem is a promise only when the signs are opposite.
- Compute . Sign: .A negative times a negative is positive.
- Compute . Sign: .Both brackets are positive at x = 4.
- Conclude: the signs match, so the theorem says nothing about the stretch from 0 to 4. It does not say there is no zero.Two points on the same side of the axis do not show what the curve does between them.
- Test one input between them: . Sign: .A new test point can uncover a hidden sign change.
- Now use the theorem twice. From to the sign goes to , so there is a zero between 0 and 2. From to the sign goes to , so there is a zero between 2 and 4.Each shorter stretch has opposite signs at its ends.
- f(0) = 3 and f(4) = 3.
- No. Matching signs give no conclusion. In fact f has two zeros between 0 and 4.
Rung 5 of 9
Find the two integers yourself
Find two consecutive integers that trap a zero of f(x) = + 2x + 5.
What it asks. Find a sign-changing interval at the requested precision.
Show the steps and the answer
The plan. Try inputs in order, then keep consecutive endpoints with opposite output signs.
- Plan. Try inputs in order, then keep consecutive endpoints with opposite output signs.
- Say what the question asks: find inputs such as 4 and 5, or and , whose outputs have opposite signs.Opposite signs at consecutive integers trap a zero between them.
- Start at 0: . Sign: .0 is the quickest input to compute.
- Try 1: . Sign: . The outputs are growing, so going right will not help.For any positive x, the terms and 2x are positive, so the output is more than 5. No zero can be to the right of 0.
- Go left. . Sign: .An odd power of a negative number is negative: (−1 = −1.
- Keep going left. . Sign: .(−2 = −8. The sign has flipped.
- Conclude: and , so a zero lies between and .f is a polynomial and the signs at the two ends are opposite.
Rung 6 of 9
Narrow the trap to one tenth
The polynomial f(x) = − 3x − 5 has a zero between 2 and 3. Find two tenths next to each other, such as 2.6 and 2.7, that the zero lies between.
What it asks. Find a sign-changing interval at the requested precision.
Show the steps and the answer
The plan. Try inputs in order, then keep consecutive endpoints with opposite output signs.
- Plan. Try inputs in order, then keep consecutive endpoints with opposite output signs.
- Say what the question asks: shrink the stretch from 2 to 3 down to a stretch one tenth wide that still has opposite signs at its ends.A shorter trap pins the zero down more closely.
- Confirm the starting trap. , sign . , sign .Never trust a claimed trap without checking the two signs.
- Decide where to start. The output is closer to 0 than 13 is, so begin near and step right by tenths.A hint for where to look first. The sign check is what decides.
- Compute . Sign: . = 4.41 × 2.1 = 9.261, and 3 × 2.1 = 6.3.
- Compute . Sign: . = 4.84 × 2.2 = 10.648, and 3 × 2.2 = 6.6.
- Compute . Sign: . = 5.29 × 2.3 = 12.167, and 3 × 2.3 = 6.9. The sign has flipped.
- Conclude: f(2.2) < 0 and f(2.3) > 0, so the zero is between 2.2 and 2.3.The theorem applies to the stretch from 2.2 to 2.3 the same way it applied from 2 to 3.
Rung 7 of 9
An equation whose target is not 0
Does the equation − x = 4 have a solution between 1 and 2?
What it asks. Prove whether the equation has a solution in the interval.
Show the steps and the answer
The plan. Subtract the target, evaluate the resulting polynomial at both ends, then compare signs.
- Plan. Subtract the target, evaluate the resulting polynomial at both ends, then compare signs.
- Say what the question asks: is there an input between 1 and 2 that makes come out to exactly 4?A solution of an equation is an input that makes both sides equal.
- Move the 4 to the left side: . Name the left side .Subtracting 4 from both sides turns the question into: does h have a zero between 1 and 2? The sign test works on zeros.
- Compute . Sign: .Replace every x with 1.
- Compute . Sign: .Replace every x with 2, powers first.
- Conclude: h is a polynomial with h(1) < 0 and h(2) > 0, so h has a zero between 1 and 2. That zero is a solution of .h(c) = 0 means − c − 4 = 0, which is the same as − c = 4.
Rung 8 of 9
Decimal ends
Show that f(x) = − 40x + 2 has a zero between 0.02 and 0.2.
What it asks. Use endpoint signs to decide what the theorem guarantees.
Show the steps and the answer
The plan. Check that the graph is unbroken, find the output at each end, then compare the signs.
f(0.02) = 1.200008, positive
f(0.05) = 0.000125, positive
f(0.06) = −0.399784, negative
f(0.2) = −5.992, negative
- Plan. Check that the graph is unbroken, find the output at each end, then compare the signs.
- Compute the output at each end, powers first. Cubing 0.02 gives a number with six decimal places.
- Only the two signs matter. Opposite signs trap a zero.
- Say what the question asks: prove there is an input between 0.02 and 0.2 whose output is 0.You do not have to find the zero, only show that it exists.
- Cube 0.02: , then .2 × 2 × 2 = 8, and each 0.02 has two decimal places, so the answer has six.
- Compute . Sign: .40 × 0.02 = 0.8. The output is positive, so the graph is above the x-axis at x = 0.02.
- Compute . Sign: . = 0.2 × 0.2 × 0.2 = 0.008, and 40 × 0.2 = 8. The output is negative, so the graph is below the x-axis at x = 0.2.
- Conclude: f is a polynomial, f(0.02) > 0 and f(0.2) < 0, so f has at least one zero between 0.02 and 0.2.This is the Intermediate Value Theorem, zero version. Opposite signs at the two ends of an unbroken curve force a crossing between them.
Rung 9 of 9
A minus sign in front of an even power
Show that g(x) = − + 20 has a zero between 2 and 3.
What it asks. Use endpoint signs to decide what the theorem guarantees.
Show the steps and the answer
The plan. Check that the graph is unbroken, find the output at each end, then compare the signs.
g(2) = 4, positive
g(2.1) = 0.5519, positive
g(2.2) = −3.4256, negative
g(3) = −61, negative
- Plan. Check that the graph is unbroken, find the output at each end, then compare the signs.
- Do the power before the minus sign: at x = 2, − is −(), which is −16.
- Opposite signs at the two ends trap a zero.
- Say what the question asks: prove there is an input between 2 and 3 whose output is 0.Two outputs with opposite signs are enough.
- Compute . Sign: . = 2 · 2 · 2 · 2 = 16. The power comes first, then the minus sign in front.
- Compute . Sign: .
- Conclude: g is a polynomial, g(2) > 0 and g(3) < 0, so g has at least one zero between 2 and 3.The graph goes from above the x-axis to below it without a break, so it crosses the axis on the way. The theorem works for + then − as well as for − then +.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: opposite signs, a zero between. Same signs, no promise.
- Quick test for opposite signs: multiply the two outputs. A negative product means opposite signs, because a product of two numbers is negative only when exactly one of them is negative.
- Write + or − beside every output as you compute it. The flip is then visible at a glance.
- The output that is closer to 0 hints at which end the zero is nearer. Use it to choose the next test input, then let the signs decide.
- Report the result as a stretch: the zero is between 1.2 and 1.3. Give a single number only when an output comes out to exactly 0.
- If an output is exactly 0, stop. That input is a zero and no trapping is needed.
- To check your work, redo it with the constant moved to the other side: a zero of + x − 3 is an input where + x equals 3.
7 The trap
Wrong: matching endpoint signs mean no zero. Right: matching signs give no conclusion.
Keep in mind
- What a test asks from this lesson: show that a polynomial has a zero between two given inputs. Compute the two outputs, write the sign of each, and finish with the sentence: the signs are opposite, so by the Intermediate Value Theorem there is at least one zero between them.
- Powers first. A minus sign in front waits until after the power: − is −16. A decimal cubed has three times as many decimal places: = 0.000008.
- Matching signs prove nothing either way.
Flash cards
Say the answer out loud, then flip.
A polynomial f has f(a) negative and f(b) positive, with a < b. What does the Intermediate Value Theorem promise?
For the polynomial f(x) = − x − 1, f(1) = −1 and f(2) = 5. What can you conclude?
A polynomial is positive at x = 0 and positive at x = 4. Does that prove there is no zero between 0 and 4?
A polynomial has f(1) negative and f(2) positive. You test the middle and find f(1.5) is positive. Which piece do you keep to narrow down the zero?
Sources
- Jay Abramson. Precalculus 2e, 3.4 Graphs of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.