Building a polynomial from its zeros
Quick review (2 minutes)
The big picture: Build a polynomial by turning each zero into a factor.
A polynomial of degree n whose zeros are exactly , , ..., , each listed as often as its multiplicity, has the form f(x) = a(x − )(x − ) ... (x − ), where a is any nonzero number. With real coefficients, a complex conjugate pair p + qi and p − qi contributes the factor (x − p + . A point (, ) on the graph that is not a zero fixes a: solve = a( − )( − ) ... ( − ).
Build the degree 3 polynomial with real coefficients, zeros 3 and 1 + 2i, and point (0, −30). The complex conjugate pairs rule adds 1 − 2i; the three zeros fill the required degree.
Use the Factor Theorem to turn zero 3 into x − 3. For the pair, use the conjugate-factor rule: (x − 1 + = − 2x + 5. Multiplying conjugates removes i because = −1.
Write f(x) = a(x − 3)( − 2x + 5), with a nonzero. The linear factorization rule allows this multiplier because multiplying by a nonzero number preserves the zeros.
Use the given point to substitute x = 0 and f(x) = −30: −30 = a(−3)(5) = −15a. Divide both sides by −15 to get a = 2. The point fixes the multiplier left open by the zeros.
Give the factored form 2(x − 3)( − 2x + 5). The question also asks for standard form, so distribute and collect like powers: f(x) = 2 − 10 + 22x − 30.
Check every condition. The degree is 3 and the coefficients are real. Synthetic division with input 3 gives remainder 0 and quotient 2 − 4x + 10; the quadratic formula gives its zeros 1 ± 2i. Finally f(0) = −30, so the zeros and point agree with the question.
Find the polynomial f(x) of degree 3 with real coefficients that has zeros 3 and 1 + 2i and whose graph passes through (0, −30). Give it in factored form and in standard form.
Factored form: f(x) = 2(x − 3)( − 2x + 5)
Standard form: f(x) = 2 − 10 + 22x − 30
Wrong: assume the multiplier is one. Right: use the given point to find it.
List every zero with its multiplicity. Add conjugate partners when coefficients must be real.
Write a factor x minus c for each zero; use a power for repeats.
Multiply conjugate factors together and put an unknown nonzero multiplier in front.
Substitute the given point and solve for the multiplier. Without a point or specified leading coefficient, choose a nonzero multiplier.
Expand only if standard form is requested.
Check each zero, the degree, and the given point.
For a zero , write the factor (qx − p): the zero gives (7x − 4). Use powers for repeats.
Multiply the factors and put an unknown multiplier in front.
Substitute the given point and solve for the multiplier.
Expand the expression into descending powers if requested.
Check the point and all zeros. The leading coefficient includes the factors’ leading numbers.
Factor Theorem
x − c is a factor of f(x) exactly when f(c) = 0. Finding a zero and finding a factor are the same discovery.
Linear Factorization Theorem
Every polynomial of degree n breaks into exactly n factors of the form (x − c), times its leading coefficient. The numbers c are its zeros and may be complex.
complex conjugate pair
Two complex numbers a + bi and a − bi: the same real part, opposite signs on the i part. Nonreal zeros of a polynomial with real coefficients always arrive together as such a pair.
1 In plain words
The big picture: Build a polynomial by turning each zero into a factor. Use the conjugate pairs from the previous lesson, then use a given point to find the multiplier. The final lesson checks possible positive and negative zero counts from the coefficient signs.
Think of zeros as tent stakes. They fix where the graph meets the ground, but leave its height free. Each zero gives a factor. A nonzero multiplier sets the height, and a point away from the zeros determines that multiplier.
2 Picture it
Reminder
Reminder: Factor Theorem, Linear Factorization Theorem, Complex conjugate pair, Multiplicity, i squared, Difference of squares, Expanding a square, Subtracting a negative, Solving a one step equation
- Factor Theorem. c is a zero exactly when (x − c) is a factor. For f(x) = (x − 4)(x + 1), f(4) = (0)(5) = 0.
- Linear Factorization Theorem. A polynomial of degree n factors as a(x − )(x − ) ... (x − ) over the complex numbers. This lesson writes that same factorization starting from the zeros.
- Complex conjugate pair. Flip the sign of the i part only. The conjugate of 1 + 2i is 1 − 2i, and the conjugate of 3i is −3i.
- Multiplicity. A zero with multiplicity 2 appears as a factor twice. (x − 5 has the zero 5 counted two times.
- i squared. = −1, so (3i = 9 = −9.
- Difference of squares. (A − B)(A + B) = − . For example (x − 5)(x + 5) = − 25.
- Expanding a square. (x − 1 = (x − 1)(x − 1) = − 2x + 1. It is not + 1 and not − 1.
- Subtracting a negative. x − (−3) = x + 3. Two minus signs side by side make a plus.
- Solving a one step equation. To undo a multiplication, divide both sides by the same number: −15a = −30 becomes a = 2. A negative divided by a negative is positive.
3 Why
The Factor Theorem turns each zero c into a factor x − c. Multiplying by a nonzero constant preserves those zeros. Substituting a point gives an equation for that constant. Conjugate factors multiply to (x − p + , so their imaginary terms cancel and leave real coefficients.
4 The rule
A polynomial of degree n whose zeros are exactly , ..., , each listed as often as its multiplicity, has the form ...
(), where a is any nonzero number.source 1 With real coefficients, a complex conjugate pair qi and qi contributes the factor . A point on the graph that is not a zero fixes a: solve ... ().
Sources (1)
- Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.
The same idea, five ways
f of x equals a, times x minus c one, times x minus c two, and so on, one bracket for each zero, and a repeated zero gets one bracket each time it repeats.
A polynomial whose zeros are exactly the given ones, each counted as often as its multiplicity, is a nonzero number a times one factor, x minus the zero, for each of them, and one point on the graph that is not a zero tells you a.
- zero c gives the factor (x − c)
- zeros p + qi and p − qi give the factor (x − p +
- point (, ): = a( − )( − ) ... ( − )
The zeros are tent stakes that fix where the graph meets the ground. The point is one measured height that fixes how tall the tent stands.
zero c gives the factor (x − c)
zeros p + qi and p − qi give (x − p +
f(x) = a · (all the factors)
plug in the point, solve for a
check: zeros give 0, the point gives its y
The same idea, other ways
Two parabolas both cross the x axis at −1 and 3. The dashed one is (x + 1)(x − 3). The solid one is −1 times that, the same curve flipped over. Same stakes, different tents. Now suppose you are told the graph passes through (1, 4). At x = 1 the dashed curve sits at (2)(−2) = −4, and the solid one sits at 4. Only the solid curve qualifies, so a = −1.
Put a drawing in an editor and stretch it to double height, measured up from the bottom edge, while every left-to-right position stays put. Every height doubles. The places where the drawing touches the bottom edge do not move, because double of zero is still zero. The number a is the zoom setting. The zeros tell you where the drawing touches the edge. One measured height that is not zero tells you the zoom.
Take zeros 2 and 5. The product is (x − 2)(x − 5). At x = 2 it is (0)(−3) = 0. At x = 5 it is (3)(0) = 0. Now put 7 in front. At x = 2 you get 7 · 0 = 0, and at x = 5 you get 7 · 0 = 0. The zeros did not move. At x = 3 the bare product is (1)(−2) = −2, and with the 7 it is −14. So a changes every height except the heights at the zeros.
Take the pair 2 + i and 2 − i. Their factors are (x − 2 − i) and (x − 2 + i). Call the shared part A = x − 2. The product is (A − i)(A + i) = − = − (−1) = + 1. Put A back: (x − 2 + 1 = − 4x + 5. The i went in twice with opposite signs and came out as a plain + 1.
| Given zero or zeros | Factor to write | Plug the zero in |
|---|---|---|
| 4 | ||
| (x + 3) | ||
| 0 | x | 0 |
| (x − ), or (2x − 1) with the 2 absorbed into a | ||
| 5 with multiplicity 2 | ||
| 3i and −3i | ||
| 1 + 2i and 1 − 2i |
Part 1: Fractional zeros and a point
Zeros fix the places where the graph meets the axis. A point away from the axis fixes its height. Fractions in the zeros are easier to manage by clearing the denominators in the factors and keeping a separate multiplier.
- The zero p/q gives x − p/q, or qx − p with its extra scale absorbed into a.
- A zero at 0 gives a factor x. A multiplicity of m gives m copies of its factor.
- Least degree uses only the required factors. Use the point to find a after choosing those factors.
zeros −2/3, 0, 2/3
f(1) = 5a = 15 → a = 3
What it asks: Build a polynomial from fractional zeros and a point.
- For a zero , write the factor (qx − p): the zero gives (7x − 4). Use powers for repeats.
- Multiply the factors and put an unknown multiplier in front.
- Substitute the given point and solve for the multiplier.
- Expand the expression into descending powers if requested.
- Check the point and all zeros. The leading coefficient includes the factors’ leading numbers.
Worked example
Fractional zeros, zero, and a point
Find a polynomial of least degree with zeros −2/3, 0 and 2/3 and passing through (1, 15). Give standard form.
What it asks. Build a polynomial from fractional zeros and a point.
Show the steps and the answer
The plan. Clear factor denominators, solve for the multiplier using the point, then expand.
- Plan. Clear factor denominators, solve for the multiplier using the point, then expand.
- Use x for a zero at 0. Replace a zero p/q by the factor qx − p, keeping an unknown multiplier.
- Write .Each zero contributes a factor. Clearing a denominator changes the numerical scale, so keep an unknown multiplier a.
- At , the product of the factors is 5. Thus .The point supplies both the input and the required output. Substitute into every factor before multiplying.
- , so .Divide both sides by the nonzero factor product to determine the multiplier.
- (3x + 2)(3x − 2) = 9 − 4. Multiply by 3x: .Multiply each term in one factor by each term in the next, combine equal powers, then apply the multiplier.
- The least degree is 3.The required multiplicities total three; adding another factor would increase the degree.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Trick: clear denominators in the factors first, then use the point to find the new multiplier.
5 How
- Build the degree 3 polynomial with real coefficients, zeros 3 and 1 + 2i, and point (0, −30). The complex conjugate pairs rule adds 1 − 2i; the three zeros fill the required degree.
- Use the Factor Theorem to turn zero 3 into x − 3. For the pair, use the conjugate-factor rule: (x − 1 + = − 2x + 5. Multiplying conjugates removes i because = −1.
- Write f(x) = a(x − 3)( − 2x + 5), with a nonzero. The linear factorization rule allows this multiplier because multiplying by a nonzero number preserves the zeros.
- Use the given point to substitute x = 0 and f(x) = −30: −30 = a(−3)(5) = −15a. Divide both sides by −15 to get a = 2. The point fixes the multiplier left open by the zeros.
- Give the factored form 2(x − 3)( − 2x + 5). The question also asks for standard form, so distribute and collect like powers: f(x) = 2 − 10 + 22x − 30.
- Check every condition. The degree is 3 and the coefficients are real. Synthetic division with input 3 gives remainder 0 and quotient 2 − 4x + 10; the quadratic formula gives its zeros 1 ± 2i. Finally f(0) = −30, so the zeros and point agree with the question.
What it asks: Build a polynomial from zeros and a point.
- List every zero with its multiplicity. Add conjugate partners when coefficients must be real.
- Write a factor x minus c for each zero; use a power for repeats.
- Multiply conjugate factors together and put an unknown nonzero multiplier in front.
- Substitute the given point and solve for the multiplier. Without a point or specified leading coefficient, choose a nonzero multiplier.
- Expand only if standard form is requested.
- Check each zero, the degree, and the given point.
6 Worked example
Worked example
A cubic from a real zero, a complex zero and a point
Find the polynomial f(x) of degree 3 with real coefficients that has zeros 3 and 1 + 2i and whose graph passes through (0, −30). Give it in factored form and in standard form.
What it asks. Build a polynomial from zeros and a point.
Show the steps and the answer
The plan. Build the factors, use the point to find the multiplier, and expand if asked.
- Plan. Build the factors, use the point to find the multiplier, and expand if asked.
- Say what is asked. Two zeros are given, the degree must be 3, the coefficients must be real numbers, and the input 0 must give the output . Find the one polynomial that does all of that.Knowing the target tells you when you are finished: three zeros, no i left in the answer, and f(0) = −30.
- Add the missing zero . The full list is 3, .Nonreal zeros of a polynomial with real coefficients come as a complex conjugate pair, so 1 + 2i brings 1 − 2i with it. That makes three zeros, which matches degree 3.
- Turn the real zero into a factor: 3 gives ().By the Factor Theorem, 3 is a zero exactly when (x − 3) is a factor. Plug 3 in to see it: 3 − 3 = 0.
- Turn the pair into one factor. Here and , so the factor is .(x − (1 + 2i))(x − (1 − 2i)) = ((x − 1) − 2i)((x − 1) + 2i) = (x − 1 − (2i = (x − 1 − 4 = (x − 1 + 4, since = −1.
- Expand it: .(x − 1 means (x − 1)(x − 1) = − x − x + 1 = − 2x + 1. Then add the 4.
- Put an unknown number a in front: .The zeros do not fix the height of the graph. Multiplying by any nonzero a keeps every zero, so a stays unknown until the point is used.
- Use the point : replace x with 0 and f(x) with . This gives .The point says the input 0 gives the output −30. This step turns that fact into an equation whose only unknown is a.
- Solve −15a = −30 by dividing both sides by −15: .Dividing undoes multiplying, and a negative divided by a negative is positive. Plug back to confirm: −15 · 2 = −30, which matches.
- Write the factored form: .Every piece is now known: the factor from the real zero, the factor from the pair, and the number in front.
- Multiply the brackets: .Multiply x by each of the three terms, then −3 by each of the three terms, then combine like terms: −2 − 3 = −5 and 5x + 6x = 11x.
- Multiply by a = 2: .Saving a for last keeps the numbers small while the brackets are multiplied.
- Factored form: f(x) = 2(x − 3)( − 2x + 5)
- Standard form: f(x) = 2 − 10 + 22x − 30
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 9
Two whole number zeros, number in front is 1
Write the polynomial of degree 2 with leading coefficient 1 whose zeros are 2 and −3.
What it asks. Build the requested polynomial with the given leading coefficient.
Show the steps and the answer
The plan. Use the zeros, repeats and required conjugates to build factors; apply the leading coefficient and expand.
- Plan. Use the zeros, repeats and required conjugates to build factors; apply the leading coefficient and expand.
- Say what is asked. The inputs 2 and must both give the output 0, and the number in front is 1.A zero is an input whose output is 0.
- Write the factors: 2 gives (), and gives .The Factor Theorem turns a zero c into the factor (x − c), and subtracting a negative is adding. Plug in to see it: 2 − 2 = 0 and −3 + 3 = 0.
- Write .The leading coefficient is given as 1, and 1 times anything changes nothing.
- Multiply: . Add them: .Each term of the first bracket multiplies each term of the second, as the four cells of the picture show. Then 3x − 2x = x.
Rung 2 of 9
Two zeros and a point
Find the polynomial of degree 2 with zeros 1 and −3 whose graph passes through (0, 6).
What it asks. Build a polynomial from zeros and a point.
Show the steps and the answer
The plan. Build the factors, use the point to find the multiplier, and expand if asked.
- Plan. Build the factors, use the point to find the multiplier, and expand if asked.
- Say what is asked. The inputs 1 and give the output 0, and the input 0 gives the output 6.The zeros give the factors, and the point will give the number in front.
- Write the factors: () and ().Zero c gives (x − c). Plug in: 1 − 1 = 0 and −3 + 3 = 0.
- Write .The number in front is not given, so it stays as the unknown a.
- Use the point (0, 6): .Replacing x with 0 and f(x) with 6 makes an equation with a as the only unknown.
- Divide both sides by −3: .A positive divided by a negative is negative. Plug back to confirm: −3 · (−2) = 6.
- Write . Multiply out: , then .Brackets first, then a. The −2 multiplies all three terms once each.
Rung 3 of 9
A zero that counts twice
Find the polynomial of degree 3 whose zeros are −1 with multiplicity 2 and 2, and whose graph passes through (1, −12).
What it asks. Build a polynomial from zeros and a point.
Show the steps and the answer
The plan. Build the factors, use the point to find the multiplier, and expand if asked.
- Plan. Build the factors, use the point to find the multiplier, and expand if asked.
- Say what is asked. The zero is counted two times, the zero 2 once, and the input 1 gives the output .Two plus one makes three zeros, which matches degree 3.
- Write the factors: with multiplicity 2 gives , and 2 gives ().Multiplicity 2 means the factor appears twice, and (x + 1)(x + 1) is written (x + 1.
- Write .The number in front is unknown until the point is used.
- Use the point (1, −12): .(1 + 1 = = 4 and 1 − 2 = −1. The point becomes an equation for a.
- Divide both sides by −4: .A negative divided by a negative is positive. Plug back to confirm: −4 · 3 = −12.
- Write . Multiply out: , then , then times 3 gives .The terms cancel: −2 + 2 = 0. And −4x + x = −3x.
Rung 4 of 9
One complex zero, real coefficients
Find the polynomial of lowest degree with real coefficients and leading coefficient 1 that has 2 + i as a zero.
What it asks. Build the requested polynomial with the given leading coefficient.
Show the steps and the answer
The plan. Use the zeros, repeats and required conjugates to build factors; apply the leading coefficient and expand.
- Plan. Use the zeros, repeats and required conjugates to build factors; apply the leading coefficient and expand.
- Say what is asked. The input must give the output 0, no i may appear in the coefficients, and no extra zeros should be added beyond what is forced.Lowest degree means using only the zeros you must use.
- Add the conjugate to the list.With real coefficients, a nonreal zero always arrives as a complex conjugate pair.
- Write the pair as one factor with p = 2 and q = 1: .(x − 2 − i)(x − 2 + i) = (x − 2 − = (x − 2 + 1, since = −1.
- Expand: .
- Write .The leading coefficient is given as 1, so a = 1.
Rung 5 of 9
Degree 4, a pair, and a fraction in front
Find the polynomial f(x) of degree 4 with real coefficients that has zeros −1, 2 and 3i and satisfies f(1) = 10.
What it asks. Build a polynomial from zeros and a point.
Show the steps and the answer
The plan. Build the factors, use the point to find the multiplier, and expand if asked.
- Plan. Build the factors, use the point to find the multiplier, and expand if asked.
- Say what is asked. Three zeros are given, the coefficients are real, and means the input 1 gives the output 10, which is the point (1, 10).A statement like f(1) = 10 is a point on the graph written another way.
- Add the conjugate . The list is , 2, 3i, .3i is 0 + 3i, so its conjugate is 0 − 3i. Four zeros match degree 4.
- Write the factors: (), (), and for the pair with and .Each real zero c gives (x − c), and the pair gives (x − p + .
- Write .The number in front is unknown until the point is used.
- Use the point (1, 10): .Replace x with 1 in every bracket and f(x) with 10. Then 2 · (−1) · 10 = −20.
- Divide both sides by −20: .Divide top and bottom by 10 to reduce the fraction. Plug back to confirm: −20 · (−) = 10.
- Write .This is the factored form with every piece known.
- Multiply the brackets: , then .Multiply each of the three terms by and by 9, then combine 9 − 2 = 7.
- Multiply every term by : .Half of each coefficient, with every sign flipped. Half of −18 with the sign flipped is 9.
- Factored form: f(x) = −(x + 1)(x − 2)( + 9)
- Standard form: f(x) = − + − + x + 9
Rung 6 of 9
Practice: clear the denominators in the factors
Find a polynomial of least degree with zeros −3/4, 0 and 3/4 and passing through (1, 14). Give standard form.
What it asks. Build a polynomial from fractional zeros and a point.
Show the steps and the answer
The plan. Clear factor denominators, solve for the multiplier using the point, then expand.
- Plan. Clear factor denominators, solve for the multiplier using the point, then expand.
- Use x for a zero at 0. Replace a zero p/q by the factor qx − p, keeping an unknown multiplier.
- Write .Each zero contributes a factor. Clearing a denominator changes the numerical scale, so keep an unknown multiplier a.
- At , the product of the factors is 7. Thus .The point supplies both the input and the required output. Substitute into every factor before multiplying.
- , so .Divide both sides by the nonzero factor product to determine the multiplier.
- (4x + 3)(4x − 3) = 16 − 9. Multiply by 2x: .Multiply each term in one factor by each term in the next, combine equal powers, then apply the multiplier.
- The least degree is 3.The required multiplicities total three; adding another factor would increase the degree.
Rung 7 of 9
Practice: a fractional zero counted twice
Find a polynomial of least degree with zeros −2/5 with multiplicity 2, and 1 and passing through (0, −12). Give standard form.
What it asks. Build a polynomial from fractional zeros and a point.
Show the steps and the answer
The plan. Clear factor denominators, solve for the multiplier using the point, then expand.
- Plan. Clear factor denominators, solve for the multiplier using the point, then expand.
- Use x for a zero at 0. Replace a zero p/q by the factor qx − p, keeping an unknown multiplier.
- Write .Each zero contributes a factor. Clearing a denominator changes the numerical scale, so keep an unknown multiplier a.
- At , the product of the factors is . Thus .The point supplies both the input and the required output. Substitute into every factor before multiplying.
- , so .Divide both sides by the nonzero factor product to determine the multiplier.
- . Multiply by : . Multiply by 3: .Multiply each term in one factor by each term in the next, combine equal powers, then apply the multiplier.
- The least degree is 3.The required multiplicities total three; adding another factor would increase the degree.
Rung 8 of 9
Practice: a point left of 0 and a fraction in front
Find a polynomial of least degree with zeros −3/2, 0 and 3/2 and passing through (−2, 7). Give standard form.
What it asks. Build a polynomial from fractional zeros and a point.
Show the steps and the answer
The plan. Clear factor denominators, solve for the multiplier using the point, then expand.
- Plan. Clear factor denominators, solve for the multiplier using the point, then expand.
- Substitute the point while the polynomial is factored. Keep the sign of every bracket.
- Write .The zero 0 gives the factor x. The zero −3/2 gives 2x + 3 and the zero 3/2 gives 2x − 3, since each bracket is 0 at its zero. The multiplier a is unknown.
- Use the point (−2, 7): .Replace x with −2 in every factor and f(x) with 7. Then (−2)(−1) = 2 and 2(−7) = −14.
- Divide both sides by −14: .7 ÷ (−14) = −. The multiplier can be a negative fraction.
- , so .The middle terms −6x and +6x cancel. Then multiply each term by x.
- .Multiply each term by −: 4 times − is −2, and −9 times − is .
Rung 9 of 9
Practice: degree 5 from a triple zero and one nonreal zero
Find the polynomial of degree 5 with real coefficients and leading coefficient 1 whose zeros are −2 with multiplicity 3 and 1 + 2i.
What it asks. Build the requested polynomial with the given leading coefficient.
Show the steps and the answer
The plan. Use the zeros, repeats and required conjugates to build factors; apply the leading coefficient and expand.
- Plan. Use the zeros, repeats and required conjugates to build factors; apply the leading coefficient and expand.
- A nonreal zero brings its conjugate. Count the zeros with multiplicity until the count equals the degree.
- Add the conjugate to the list of zeros.With real coefficients, nonreal zeros come in conjugate pairs. The count is now 3 + 1 + 1 = 5, which matches degree 5.
- The zero with multiplicity 3 gives .The factor for −2 is x + 2, and multiplicity 3 means three copies of it.
- The pair and gives .For a pair p + qi and p − qi the quadratic is (x − p + . Here (x − 1 = − 2x + 1, and 1 + 4 = 5.
- .The leading coefficient is 1, so no extra number goes in front.
- , and .Multiply two copies first, then the third: + 2 + 4 + 8x + 4x + 8.
- .Collect each power. For : −2 + 6 = 4. For : 5 − 12 + 12 = 5. For : 30 − 24 + 8 = 14. For x: 60 − 16 = 44. The constant is 8 · 5 = 40.
- Factored form: f(x) = (x + 2( − 2x + 5)
- Standard form: f(x) = + 4 + 5 + 14 + 44x + 40
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue for signs: the bracket shows the opposite sign of the zero. Zero 4 gives (x − 4). Zero −4 gives (x + 4).
- Write a in front before doing anything else with the factors, even if you expect it to turn out to be 1.
- Find a while the polynomial is still factored. Plugging a point into brackets takes far less arithmetic than plugging into the multiplied out form.
- If the point has x = 0, every bracket collapses to its constant, so the equation for a is one multiplication.
- Shortcut for a pair p + qi and p − qi: the quadratic is − 2px + ( + ). For 1 + 2i and 1 − 2i that is − 2x + 5. The last number is always positive.
- Count the zeros, with multiplicity and with both members of each pair. The count must equal the degree.
- The phrase lowest degree means: use only the zeros you are forced to use. Without it, extra factors could be tacked on and the given zeros would still be zeros.
- When every bracket starts with a plain x or , the number a ends up as the leading coefficient of the multiplied out polynomial. A bracket such as (2x − 1) multiplies that coefficient by 2.
- Two checks finish every problem: each zero gives 0, and the point gives its y value.
7 The trap
Wrong: assume the multiplier is one. Right: use the given point to find it.
Keep in mind
- Test tasks: build the least-degree polynomial from zeros, multiplicities and one point. Expect fractional zeros, a negative fraction in front, and a nonreal zero that brings its conjugate.
Flash cards
Say the answer out loud, then flip.
In the tent picture, the zeros are the stakes. What do the stakes leave undecided, and what settles it?
- The stakes leave the height undecided. That height is the number a in front of the factors.
- One point on the graph that is not a zero settles it: plug the point in and solve for a.
A polynomial of degree 2 has zeros 2 and −3 and its graph passes through (0, 12). Find a, then write the polynomial in factored form.
- Start with f(x) = a(x − 2)(x + 3).
- Put in x = 0 and f(x) = 12: 12 = a(−2)(3) = −6a, so a = −2.
- Check: −2 · (−2) · 3 = 12.
The coefficients must be real and one zero is 1 + 2i. What other zero must be on the list, and what single factor does the pair give?
- The conjugate 1 − 2i must be on the list. Flip the sign of the i part only.
- The pair gives (x − 1 + = − 2x + 5.
Why can you multiply all the factors by a nonzero number a without moving any zero?
- At a zero the factors multiply to 0, and a · 0 = 0, so it is still a zero.
- Everywhere else the factors give a nonzero number, and a times a nonzero number is never 0, so no new zero appears.
- Same stakes, different tent height.
Sources
- Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.