Quarry School

Sketching a polynomial from its features

Subject: MathematicsLeans on: Zeros from the factored formLeans on: MultiplicityLeans on: The y-interceptLeans on: End behavior from the leading termLeans on: Sign of a productLeans on: Powers of a negative numberLeans on: Order of operationsLeans on: Intermediate Value Theorem
Level 1 · FoundationsAbout 28 min read3 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Leans on

    Quick review (2 minutes)

    In plain words

    The big picture. Sketch a polynomial using its zeros, crossings, heights and ends.

    Rule

    For a polynomial f that is not constant, written in factored form: the zeros cut the x-axis into intervals, and on each interval f(x) keeps one sign, the sign of f at any test point inside it. At a zero of odd multiplicity the graph crosses the x-axis; at a zero of even multiplicity it touches and turns back. The y-intercept is (0, f(0)). The two arms follow the leading term.

    Step

    1. Use the zero-product rule on f(x) = (x + 1)(x − 2)2. Solving x + 1 = 0 and x − 2 = 0 gives −1 and 2. Use the multiplicity rule to mark a crossing at (−1, 0) and a touch and turn at (2, 0): their powers are odd and even, respectively.

    2. Use the y-intercept rule, (0, f(0)): f(0) = (0 + 1)(0 − 2)2 = 4. Plot (0, 4), since every point on the y-axis has input zero.

    3. Use the leading-term rule to find both ends. Multiplying the leading pieces gives x · x2 = x3. Its odd degree and positive coefficient mean the left end goes down and the right end goes up.

    4. Use the interval-sign rule: once all real zeros are listed, one test input gives the sign on each interval. Compute f(−2) = −16, reuse f(0) = 4 and compute f(3) = 4. The graph is below the axis for x < −1 and above it for −1 < x < 2 and x > 2.

    5. Draw one smooth, unbroken curve through the marked points. Also plot f(1) = 2 to guide the middle. Cross at −1, pass through (0, 4) and (1, 2), touch at 2, then rise through (3, 4). The multiplicity and sign rules keep each stretch on the correct side.

    6. Check from right to left using the same rules. The right end is positive. Passing the even zero 2 keeps that sign; passing the odd zero −1 changes it to negative. These signs agree with the test values and the left end. Check that the sketch includes both intercepts and (0, 4).

    Strategy

    1. A correct sketch changes sign only at an odd-multiplicity zero. Exact turning-point heights need more information.

    Question

    Sketch the graph of f(x) = (x + 1)(x − 2)2.

    Answer

    Zeros: x = −1 (multiplicity 1, crosses) and x = 2 (multiplicity 2, touches and turns back)
    y-intercept: (0, 4)
    Ends: left arm down, right arm up
    Signs: below the x-axis for x < −1, above for −1 < x < 2, above for x > 2
    Curve: rises from the lower left through (−2, −16), crosses at (−1, 0), passes through (0, 4) and (1, 2), touches (2, 0), and rises through (3, 4)

    Trap

    Wrong: switch sides at every zero. Right: switch at odd multiplicity and keep the side at even multiplicity.

    Strategy

    1. Factor fully and list every real zero with its multiplicity.

    2. Add degrees and multiply leading coefficients to determine both ends.

    3. Compute the y-intercept by setting x equal to zero.

    4. Choose one test input in every interval cut out by the zeros.

    5. Mark crosses, touches and known heights; connect them smoothly.

    6. Check each interval’s sign and both ends against the drawing.

    Strategy

    1. Pull out any common factor.

    2. Factor the remaining sum by grouping or a quadratic pattern.

    3. Solve the factors and combine repeated zeros.

    4. Use the sketch plan: ends, intercepts, interval signs, then a smooth curve.

    Term

    multiplicity

    Definition

    The number of times the same factor appears in the factored form: the exponent on that factor. It decides whether the graph crosses the x-axis or only touches it.

    Term

    Intermediate Value Theorem

    Definition

    If a polynomial's output is negative at one input and positive at another, the output must be 0 somewhere between them, because the graph is one unbroken curve.

    1 In plain words

    The big picture. Sketch a polynomial using its zeros, crossings, heights and ends. Combine the previous lessons: factors locate zeros, powers describe crossings, and signs guide the curve between them. Every feature must agree with the formula. Next, work backward from a graph to a formula.

    Build a trail map from a few landmarks. Zeros mark meetings with the x-axis. Multiplicities tell the curve to cross or touch. The leading term sets the far ends. The y-intercept anchors a height, and one test point between neighboring zeros tells which side of the axis that whole stretch uses. Join these features with a smooth curve.

    2 Picture it

    Zeros: set each factor = 0

    Multiplicity: odd crosses, even touches

    Y-intercept: f(0)

    Ends: degree and leading coefficient

    Test points: one in each interval

    Then draw one smooth curve

    Reminder

    Reminder: Zeros from the factored form, Multiplicity, The y-intercept, End behavior from the leading term, Sign of a product, Powers of a negative number, Order of operations, Intermediate Value Theorem
    • Zeros from the factored form. A product is 0 only when one of its factors is 0. For (x + 1)(x − 2)2 = 0, solve x + 1 = 0 to get x = −1 and x − 2 = 0 to get x = 2.
    • Multiplicity. The multiplicity of a zero is the exponent on its factor. In (x − 2)2, the zero 2 has multiplicity 2. Odd crosses, even touches and turns back.
    • The y-intercept. The graph meets the y-axis where x = 0. For f(x) = (x + 1)(x − 2)2, f(0) = (1)(4) = 4, so the y-intercept is (0, 4).
    • End behavior from the leading term. Even degree: both arms up when the leading coefficient is positive, both down when it is negative. Odd degree: left down and right up when it is positive, left up and right down when it is negative. Example: x3 falls on the left and rises on the right.
    • Sign of a product. A product is negative when an odd number of its factors are negative. (−1)(16) = −16 has one negative factor. (−1)(−5)(1) = 5 has two.
    • Powers of a negative number. An even power of a negative number is positive: (−4)2 = (−4)(−4) = 16. An odd power stays negative: (−2)3 = (−2)(−2)(−2) = −8.
    • Order of operations. Work inside the parentheses first, then the exponent, then multiply. (0 − 2)2 = (−2)2 = 4. A minus sign in front waits until after the square: −(3)2 = −9.
    • Intermediate Value Theorem. If a polynomial is positive at one input and negative at another, it has a zero between them. Turned around: if neither input is a zero and no zero lies between them, the outputs at both have the same sign.

    3 Why

    A polynomial’s graph is unbroken. If its sign changed between neighboring zeros, the Intermediate Value Theorem would force another zero between them. That would contradict their being neighbors. So one test point determines the sign throughout each interval, once every real zero has been found.

    4 The rule

    For a polynomial f that is not constant, written in factored form: the zeros cut the x-axis into intervals, and on each interval f(x) keeps one sign, the sign of f at any test point inside it.

    At a zero of odd multiplicity the graph crosses the x-axis; at a zero of even multiplicity it touches and turns back. The y-intercept is (0, f(0)). The two arms follow the leading term.

    The same idea, five ways

    Say it

    f is positive between negative one and two.

    Write it

    On the interval between the zeros −1 and 2, every output of f(x) = (x + 1)(x − 2)2 is greater than 0, so the graph lies above the x-axis there.

    In math
    • f(x) > 0 for −1 < x < 2
    • f(x) > 0 on (−1, 2)
    • test point: f(0) = 4 > 0, and f has no zero between −1 and 2
    • graph words: the graph is above the x-axis from x = −1 to x = 2
    Like

    A river can only be crossed at a bridge. Check one house on a street between two bridges and you know which bank the whole street is on. The zeros are the bridges, and the test point is the one house.

    See it
    −12f(0) = 4(−1, 2)
    The open interval between the zeros −1 and 2.

    The same idea, other ways

    As a picture

    Draw a number line and mark the zeros. They cut the line into rooms. Write above or below in each room after one test point. The picture shows h(x) = (x + 2)(x − 1)2(x − 4), with zeros −2, 1 and 4. Test points: h(−3) = (−1)(16)(−7) = 112, above. h(0) = (2)(1)(−4) = −8, below. h(2) = (4)(1)(−2) = −8, below. h(5) = (7)(16)(1) = 112, above. The side changes at −2 and at 4, where the multiplicity is odd. It stays the same on both sides of 1, where the multiplicity is even.

    −214+ above− below− below+ above
    The zeros −2, 1 and 4 cut the line into four rooms.
    As a story

    The x-axis is a river and the graph is a road. The zeros are the only bridges. At a bridge with odd multiplicity the road goes over to the other bank. At a bridge with even multiplicity the road drives onto the bridge, turns around, and comes back to the same bank. Between bridges the road cannot change banks, so asking one house on that stretch which bank it is on answers the question for the whole stretch. The end behavior tells you which bank the road is on far out of town, in both directions.

    With small numbers

    Take f(x) = (x + 1)(x − 3). Zeros: −1 and 3, each with multiplicity 1, so the graph crosses at both. y-intercept: f(0) = (1)(−3) = −3. Leading term: x · x = x2, so both arms point up. Test points: f(−2) = (−1)(−5) = 5, above. f(0) = −3, below. f(4) = (5)(1) = 5, above. Five plotted points and two arms give the U shape in the picture.

    (−2, 5)(−1, 0)(0, −3)(3, 0)(4, 5)−224−4−2246
    The graph of f(x) = (x + 1)(x − 3).
    Why it must be true

    Use f(x) = (x + 1)(x − 2)2, whose only zeros are −1 and 2. You know f(0) = 4, which is positive. Suppose someone claims f(1) is negative. Then f would change sign between 0 and 1, and the Intermediate Value Theorem would force a zero somewhere between 0 and 1. There is no zero there. So the claim is impossible, and f(1) must be positive too. Direct arithmetic agrees: f(1) = (2)(−1)2 = 2. The same argument works for any two inputs in the same interval.

    As a rule of thumb

    Start at the right arm and walk left. The right arm tells you the side you start on: up means above, down means below. At every zero with odd multiplicity, switch sides. At every zero with even multiplicity, stay on the same side. For f(x) = (x + 1)(x − 2)2: the right arm is up, so above. At 2 the multiplicity is even, so stay above. At −1 it is odd, so switch to below. This gives the signs with no arithmetic. The test points then supply the heights and catch slips.

    FeatureHow to get itWhat it tells the sketch
    ZerosSet each factor equal to 0 and solveWhere the graph meets the x-axis
    MultiplicityRead the exponent on each factor of the form (x − c)Odd: crosses. Even: touches and turns back. Higher: flatter near the zero
    y-interceptCompute f(0)Where the graph meets the y-axis
    End behaviorAdd the degrees of the factors, each counted as many times as its exponent, for the degree; multiply the highest-power terms of the factors for the signWhich way the far left arm and the far right arm point
    Test pointsPick one x inside each interval between zeros and compute f(x)Above or below the x-axis on that interval, and one more point to draw through

    Part 1: From features to a sketch

    What it asks: Draw a polynomial’s overall shape from its formula.

    The picture shows the finished sketch of f(x) = (x − 1)(x + 3). The ladder works through its features.

    The plan

    1. Factor fully and list every real zero with its multiplicity.
    2. Add degrees and multiply leading coefficients to determine both ends.
    3. Compute the y-intercept by setting x equal to zero.
    4. Choose one test input in every interval cut out by the zeros.
    5. Mark crosses, touches and known heights; connect them smoothly.
    6. Check each interval’s sign and both ends against the drawing.
    (−4, 5)(−3, 0)(0, −3)(1, 0)(2, 5)−6−4−224−4−2246
    y=(x+1)2−4.

    Tips and tricks

    • Trap: The sign outside the product affects both end behavior and every height.
    • Trick: Read the leading term by multiplying only the highest-power pieces.

    Part 2: Factor an expanded formula first

    What it asks: Sketch when the zeros are hidden in a sum.

    The plan

    1. Pull out any common factor.
    2. Factor the remaining sum by grouping or a quadratic pattern.
    3. Solve the factors and combine repeated zeros.
    4. Use the sketch plan: ends, intercepts, interval signs, then a smooth curve.
    x³x²x²−9x−9−9x1
    An area model with sides x2 + −9 and x + 1.

    Tips and tricks

    • Trap: Treating separate terms as factors produces false zeros.
    • Trick: Multiply the factors back once before using them to draw.

    5 How

    1. Use the zero-product rule on f(x) = (x + 1)(x − 2)2. Solving x + 1 = 0 and x − 2 = 0 gives −1 and 2. Use the multiplicity rule to mark a crossing at (−1, 0) and a touch and turn at (2, 0): their powers are odd and even, respectively.
    2. Use the y-intercept rule, (0, f(0)): f(0) = (0 + 1)(0 − 2)2 = 4. Plot (0, 4), since every point on the y-axis has input zero.
    3. Use the leading-term rule to find both ends. Multiplying the leading pieces gives x · x2 = x3. Its odd degree and positive coefficient mean the left end goes down and the right end goes up.
    4. Use the interval-sign rule: once all real zeros are listed, one test input gives the sign on each interval. Compute f(−2) = −16, reuse f(0) = 4 and compute f(3) = 4. The graph is below the axis for x < −1 and above it for −1 < x < 2 and x > 2.
    5. Draw one smooth, unbroken curve through the marked points. Also plot f(1) = 2 to guide the middle. Cross at −1, pass through (0, 4) and (1, 2), touch at 2, then rise through (3, 4). The multiplicity and sign rules keep each stretch on the correct side.
    6. Check from right to left using the same rules. The right end is positive. Passing the even zero 2 keeps that sign; passing the odd zero −1 changes it to negative. These signs agree with the test values and the left end. Check that the sketch includes both intercepts and (0, 4).

    Use signs to check the sketch

    1. A correct sketch changes sign only at an odd-multiplicity zero. Exact turning-point heights need more information.

    6 Worked example

    Worked example

    A cubic with one crossing and one touch

    Sketch the graph of f(x) = (x + 1)(x − 2)2.

    What it asks. Sketch the graph with intercepts, crossings or touches, and both ends.

    Show the steps and the answer

    The plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.

    input xoutput f(x)−2−16−1004122034
    The two 0s in the output row are the zeros.
    −12− below+ above+ above
    The side changes at −1 and does not change at 2.
    1. Plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.
    1. Set each factor equal to 0. x+1=0 gives x=−1. x−2=0 gives x=2. Plug back: f(−1)=(−1+1)(−1−2)2=(0)(9)=0 and f(2)=(2+1)(2−2)2=(3)(0)=0.A product is 0 only when one of its factors is 0, so this step finds the only two places where the graph meets the x-axis. Each real zero c gives the x-intercept (c, 0): here (−1, 0) and (2, 0).
    2. Read the multiplicity of each zero. (x+1) has exponent 1, so x=−1 has multiplicity 1. (x−2)2 has exponent 2, so x=2 has multiplicity 2.Odd multiplicity means the graph crosses the x-axis, so it crosses at −1. Even multiplicity means it touches and turns back, so it touches at 2.
    3. Find the y-intercept. f(0)=(0+1)(0−2)2=(1)(−2)2=(1)(4)=4. Plot (0, 4).Every point on the y-axis has x = 0, so putting 0 in for x gives the one point where the graph meets the y-axis.
    4. Find the end behavior. Degree: 1+2=3. Leading term: x·x2=x3, so the leading coefficient is 1.The highest power comes from multiplying the x part of every factor. Odd degree with a positive leading coefficient means the left arm points down and the right arm points up.
    5. List the intervals. The zeros −1 and 2 cut the x-axis into three: x<−1,−1<x<2, and x > 2. Choose a test point inside each: −2, 0 and 3. Add 1 as an extra point between the zeros.The graph cannot change sides inside an interval, so one input from each interval tells the side for all of it. Small integers keep the arithmetic short, and f(0) is already computed.
    6. Compute the test points. f(−2)=(−2+1)(−2−2)2=(−1)(−4)2=(−1)(16)=−16. f(1)=(1+1)(1−2)2=(2)(−1)2=(2)(1)=2. f(3)=(3+1)(3−2)2=(4)(1)2=4. With f(0)=4, the table in the picture is complete.A negative output means the graph is below the x-axis there, and a positive output means above. So the graph is below for x < −1, above for −1 < x < 2, and above for x > 2.
    7. Draw the curve from left to right. Start low on the left, rise through (−2,−16), cross the x-axis at (−1,0), go up through (0, 4), bend over, come down through (1, 2), touch the x-axis at (2, 0), turn back up through (3, 4), and keep rising.Each piece obeys one fact: the left arm down, the crossing at the odd zero, the test points, the touch at the even zero, the right arm up. The curve is smooth, with no corners and no gaps.
    Answer
    • Zeros: x = −1 (multiplicity 1, crosses) and x = 2 (multiplicity 2, touches and turns back)
    • y-intercept: (0, 4)
    • Ends: left arm down, right arm up
    • Signs: below the x-axis for x < −1, above for −1 < x < 2, above for x > 2
    • Curve: rises from the lower left through (−2, −16), crosses at (−1, 0), passes through (0, 4) and (1, 2), touches (2, 0), and rises through (3, 4)
    Double-check Second way, with no arithmetic: walk from the right arm to the left. The right arm is up, so f is positive for x > 2. The zero 2 has even multiplicity, so the sign stays positive between −1 and 2. The zero −1 has odd multiplicity, so the sign switches to negative for x < −1, which agrees with the left arm pointing down. This matches the computed values 4, then 4 and 2, then −16.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 6

    Two single zeros, a U shape

    Sketch f(x) = (x − 1)(x + 3).

    What it asks. Sketch the graph with intercepts, crossings or touches, and both ends.

    Show the steps and the answer

    The plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.

    (−4, 5)(−3, 0)(0, −3)(1, 0)(2, 5)−6−4−224−4−2246
    The same picture again: y = (x + 1)2 − 4.
    1. Plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.
    1. Zeros: x−1=0 gives x=1. x+3=0 gives x=−3. Plug back: f(1)=(0)(4)=0 and f(−3)=(−4)(0)=0.Setting each factor equal to 0 finds the only inputs where the graph meets the x-axis.
    2. Multiplicity: each factor has exponent 1.1 is odd, so the graph crosses the x-axis at −3 and at 1.
    3. y-intercept: f(0)=(0−1)(0+3)=(−1)(3)=−3. Plot (0,−3).The graph meets the y-axis where x = 0.
    4. Ends: degree 1+1=2. Leading term x·x=x2.Even degree with a positive leading coefficient: both arms point up.
    5. Test points, one in each of the three intervals: f(−4)=(−5)(−1)=5. f(0)=−3. f(2)=(1)(5)=5.−4 is left of both zeros, 0 is between them, and 2 is right of both. Positive means above the x-axis, negative means below.
    6. Draw: come down from the upper left through (−4,5), cross at (−3,0), dip through (0,−3), come back up to cross at (1, 0), and rise through (2, 5).The curve must pass through every plotted point, cross at both odd zeros, and end with both arms up.
    Answer
    • Zeros: −3 and 1, crossing at both
    • y-intercept: (0, −3)
    • Ends: both arms up
    • Signs: above for x < −3, below for −3 < x < 1, above for x > 1
    Double-check Walk from the right: the right arm is up, so positive for x > 1. Odd zero at 1: switch to negative. Odd zero at −3: switch to positive, which agrees with the left arm pointing up. This matches the values 5, −3, 5.

    Rung 2 of 6

    Three single zeros, and a factor that is a bare x

    Sketch f(x) = x(x − 3)(x + 2).

    What it asks. Sketch the graph with intercepts, crossings or touches, and both ends.

    Show the steps and the answer

    The plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.

    input xoutput f(x)−3−18−20−14001−630424
    The three 0s in the output row are the zeros, and the outputs between them alternate in sign.
    −203− below+ above− below+ above
    Three crossings, so the side switches at every zero.
    1. Plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.
    1. Zeros: x=0 from the factor x. x−3=0 gives x=3. x+2=0 gives x=−2. Plug back: f(0)=(0)(−3)(2)=0,f(3)=(3)(0)(5)=0,f(−2)=(−2)(−5)(0)=0.The factor x is the same as (x − 0), so it gives a zero at 0. Gotcha: a bare x is a factor too, and forgetting it loses a zero.
    2. Multiplicity: every factor has exponent 1.All three are odd, so the graph crosses at −2, at 0 and at 3.
    3. y-intercept: f(0)=0, so the y-intercept is the origin (0, 0).0 is one of the zeros, so the graph meets both axes at the same point. It cannot serve as a test point.
    4. Ends: degree 1+1+1=3. Leading term x·x·x=x3.Odd degree with a positive leading coefficient: left arm down, right arm up.
    5. Test points in the four intervals: f(−3)=(−3)(−6)(−1)=−18. f(−1)=(−1)(−4)(1)=4. f(1)=(1)(−2)(3)=−6. f(4)=(4)(1)(6)=24.Three zeros make four intervals: x < −2, −2 < x < 0, 0 < x < 3, and x > 3. Each needs its own test point.
    6. Draw: rise from the lower left through (−3,−18), cross at (−2,0), go over a hill through (−1,4), cross at (0, 0), pass through (1,−6), keep falling to a valley between 1 and 3, then rise to cross at (3, 0), and rise through (4, 24).The sides alternate below, above, below, above, because every zero is a crossing.
    Answer
    • Zeros: −2, 0 and 3, crossing at each
    • y-intercept: (0, 0)
    • Ends: left arm down, right arm up
    • Signs: below for x < −2, above for −2 < x < 0, below for 0 < x < 3, above for x > 3
    Double-check Count negative factors at each test point. At −3 all three factors are negative: odd count, negative. At −1 two are negative (x and x − 3): even count, positive. At 1 one is negative (x − 3): negative. At 4 none is negative: positive. This matches −18, 4, −6, 24.

    Rung 3 of 6

    A minus sign in front and a zero that touches

    Sketch f(x) = −x2(x − 3).

    What it asks. Sketch the graph with intercepts, crossings or touches, and both ends.

    Show the steps and the answer

    The plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.

    input xoutput f(x)−14001224304−16
    The outputs on both sides of x = 0 are positive, which is the touch; the sign changes only after x = 3.
    03+ above+ above− below
    Same side on both sides of the even zero 0, a switch at the odd zero 3.
    1. Plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.
    1. Zeros: x2=0 gives x=0. x−3=0 gives x=3. Plug back: f(0)=−(0)2(−3)=0 and f(3)=−(9)(0)=0.The factor −1 in front is never 0, so it adds no zero. Only x2 and (x − 3) can be 0.
    2. Multiplicity: x2 has exponent 2, so the zero 0 has multiplicity 2. (x−3) has exponent 1, so the zero 3 has multiplicity 1.Even at 0: the graph touches the x-axis and turns back. Odd at 3: the graph crosses.
    3. y-intercept: f(0)=0, so it is the origin (0, 0).0 is a zero, so the graph meets both axes there.
    4. Ends: degree 2+1=3. Leading term −x2·x=−x3.Odd degree with a negative leading coefficient: left arm up, right arm down. Gotcha: the minus sign in front belongs to the leading term.
    5. Test points: f(−1)=−(−1)2(−1−3)=−(1)(−4)=4. f(1)=−(1)2(1−3)=−(1)(−2)=2. f(2)=−(2)2(2−3)=−(4)(−1)=4. f(4)=−(4)2(4−3)=−(16)(1)=−16.The intervals are x < 0, 0 < x < 3, and x > 3. Square first, then apply the minus sign in front: −(−1)2 is −(1), not +1.
    6. Draw: come down from the upper left through (−1,4), touch the x-axis at (0, 0), turn back up through (1, 2) and (2, 4), bend over, cross at (3, 0), and fall through (4,−16).The graph stays above the axis on both sides of the even zero, then switches to below at the odd zero, ending with the right arm down.
    Answer
    • Zeros: 0 (multiplicity 2, touches and turns back) and 3 (multiplicity 1, crosses)
    • y-intercept: (0, 0)
    • Ends: left arm up, right arm down
    • Signs: above for x < 0, above for 0 < x < 3, below for x > 3
    Double-check Walk from the right: the right arm is down, so negative for x > 3. Odd zero at 3: switch to positive between 0 and 3. Even zero at 0: stay positive for x < 0, which agrees with the left arm pointing up. This matches −16, then 4 and 2, then 4.

    Rung 4 of 6

    Factor first, then sketch

    Sketch f(x) = x3 + x2 − 9x − 9.

    What it asks. Find hidden zeros, then sketch the polynomial.

    Show the steps and the answer

    The plan. Group and factor first; use the factors to build the intercepts and sign chart.

    x³x²x²−9x−9−9x1
    The same picture again: An area model with sides x2 + −9 and x + 1.
    input xoutput f(x)−4−21−30−25−100−930435
    The 0s in the output row sit under −3, −1 and 3, and the signs alternate between them.
    1. Plan. Group and factor first; use the factors to build the intercepts and sign chart.
    1. Factor by grouping. (x3+x2)+(−9x−9)=x2(x+1)−9(x+1)=(x+1)(x2−9).x2 comes out of the first pair and −9 out of the second, leaving the same bracket (x + 1) in both, which then comes out as a common factor. The picture shows the four terms as the four cells of a multiplication grid.
    2. Factor x2−9=(x−3)(x+3). So f(x)=(x+1)(x−3)(x+3).x2 − 9 is a difference of squares: x2 − 32.
    3. Zeros: x+1=0 gives x=−1. x−3=0 gives x=3. x+3=0 gives x=−3. Plug back into the original formula for one of them: f(3)=27+9−27−9=0.Setting each factor equal to 0 finds every place the graph meets the x-axis. Plugging into the original formula is also a quick check on the factoring.
    4. Multiplicity: every factor has exponent 1.All odd, so the graph crosses at −3, at −1 and at 3.
    5. y-intercept: f(0)=0+0−0−9=−9. Plot (0,−9).With x = 0, every term that contains x vanishes, and only the constant term is left.
    6. Ends: the leading term is x3, read straight from the original formula.Odd degree with a positive leading coefficient: left arm down, right arm up.
    7. Test points, using the factored form: f(−4)=(−3)(−7)(−1)=−21. f(−2)=(−1)(−5)(1)=5. f(0)=(1)(−3)(3)=−9. f(4)=(5)(1)(7)=35.The intervals are x < −3, −3 < x < −1, −1 < x < 3, and x > 3. The factored form makes each sign visible.
    8. Draw: rise from the lower left through (−4,−21), cross at (−3,0), go over a small hill through (−2,5), cross at (−1,0), drop through (0,−9), come back up to cross at (3, 0), and rise through (4, 35).Three crossings, so the sides alternate: below, above, below, above.
    Answer
    • Factored form: f(x) = (x + 1)(x − 3)(x + 3)
    • Zeros: −3, −1 and 3, crossing at each
    • y-intercept: (0, −9)
    • Ends: left arm down, right arm up
    • Signs: below for x < −3, above for −3 < x < −1, below for −1 < x < 3, above for x > 3
    Double-check Recompute two test points from the original formula. f(−2) = −8 + 4 + 18 − 9 = 5. f(4) = 64 + 16 − 36 − 9 = 35. Both agree with the factored form, a check on the factoring and the signs.

    Rung 5 of 6

    Degree 5, negative in front, a touch and a flattened crossing

    Sketch f(x) = −(x + 2)2(x − 1)3.

    What it asks. Sketch the graph with intercepts, crossings or touches, and both ends.

    Show the steps and the answer

    The plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.

    input xoutput f(x)−364−20−1804102−16
    Positive outputs on both sides of x = −2 show the touch; the sign changes only at x = 1.
    −21+ above+ above− below
    No switch at the even zero −2, a switch at the odd zero 1.
    1. Plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.
    1. Zeros: x+2=0 gives x=−2. x−1=0 gives x=1. Plug back: f(−2)=−(0)2(−3)3=0 and f(1)=−(3)2(0)3=0.A power of a factor is 0 exactly when the factor is 0, so these are the only x-intercepts.
    2. Multiplicity: (x+2)2 gives multiplicity 2 at −2. (x−1)3 gives multiplicity 3 at 1.Even at −2: touches and turns back. Odd at 1: crosses, and because 3 is higher than 1 the graph flattens as it passes through, like the middle of the graph of x3.
    3. y-intercept: f(0)=−(0+2)2(0−1)3=−(4)(−1)=4. Plot (0, 4).(−1)3 = −1, and the minus sign in front turns −4 into 4.
    4. Ends: degree 2+3=5. Leading term −x2·x3=−x5.Odd degree with a negative leading coefficient: left arm up, right arm down.
    5. Test points: f(−3)=−(−1)2(−4)3=−(1)(−64)=64. f(−1)=−(1)2(−2)3=−(1)(−8)=8. f(0)=4. f(2)=−(4)2(1)3=−(16)(1)=−16.The intervals are x < −2, −2 < x < 1, and x > 1. The middle interval gets two points, −1 and 0, to show its shape. An odd power of a negative stays negative: (−4)3 = −64.
    6. Draw: come down steeply from the upper left through (−3,64), touch the x-axis at (−2,0), turn back up through (−1,8), come down through (0, 4), level off while crossing at (1, 0), then fall through (2,−16).Above on both sides of the even zero, a flattened switch to below at the zero of multiplicity 3, and the right arm down.
    Answer
    • Zeros: −2 (multiplicity 2, touches and turns back) and 1 (multiplicity 3, crosses and flattens)
    • y-intercept: (0, 4)
    • Ends: left arm up, right arm down
    • Signs: above for x < −2, above for −2 < x < 1, below for x > 1
    Double-check Walk from the right: the right arm is down, so negative for x > 1. Odd zero at 1: switch to positive between −2 and 1. Even zero at −2: stay positive for x < −2, which agrees with the left arm pointing up. This matches −16, then 4 and 8, then 64.

    Rung 6 of 6

    A number in front and three crossings

    Sketch f(x) = −2x(x + 3)(x − 2).

    What it asks. Sketch the graph with intercepts, crossings or touches, and both ends.

    Show the steps and the answer

    The plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.

    input xoutput f(x)−448−30−1−120018203−36
    The 0s sit under −3, 0 and 2, and the outputs around them go positive, negative, positive, negative.
    −302+ above− below+ above− below
    The side switches at −3, at 0 and at 2, so the four intervals alternate.
    1. Plan. Find each zero and its multiplicity, the y-intercept and both ends, test each interval, then draw one smooth curve.
    2. The −2 in front gives no zero, but it sets the sign of the leading term and scales every test point.
    3. Three zeros make four intervals. Compute one test point in each.
    1. Zeros: the −2 gives none. x=0 from the lone x. x+3=0 gives x=−3. x−2=0 gives x=2. Plug back: f(0)=−2(0)(3)(−2)=0,f(−3)=−2(−3)(0)(−5)=0,f(2)=−2(2)(5)(0)=0.A number in front is never 0. Each factor that holds x gives one x-intercept: (−3, 0), (0, 0) and (2, 0).
    2. Multiplicity: every factor has exponent 1.All three are odd, so the graph crosses the x-axis at −3, at 0 and at 2.
    3. y-intercept: f(0)=0, so it is the origin (0, 0).0 is one of the zeros, so the graph meets both axes at the same point.
    4. Ends: degree 1+1+1=3. Leading term −2·x·x·x=−2x3. The left arm goes up and the right arm goes down.Odd degree with a negative leading coefficient. Written with arrows, where → is read "goes to": as x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞.
    5. Test points in the four intervals: f(−4)=−2(−4)(−1)(−6)=48. f(−1)=−2(−1)(2)(−3)=−12. f(1)=−2(1)(4)(−1)=8. f(3)=−2(3)(6)(1)=−36.The intervals are x < −3, −3 < x < 0, 0 < x < 2 and x > 2. Count the negative numbers in each product, the −2 included: four at x = −4 make a positive, three at x = −1 make a negative, two at x = 1 make a positive, one at x = 3 makes a negative.
    6. Draw: come down from the upper left through (−4,48), cross at (−3,0), dip through (−1,−12), come back up to cross at (0, 0), go over a hill through (1, 8), cross at (2, 0), and fall through (3,−36).Three crossings, so the sides alternate: above, below, above, below. The first and the last agree with the arms.
    Answer
    • x-intercepts: (−3, 0), (0, 0) and (2, 0), each with multiplicity 1, crossing at each
    • y-intercept: (0, 0)
    • Ends: left arm up, right arm down. As x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞
    • Signs: above for x < −3, below for −3 < x < 0, above for 0 < x < 2, below for x > 2
    Double-check Walk from the right: the right arm is down, so negative for x > 2. Odd zero at 2: switch to positive. Odd zero at 0: switch to negative. Odd zero at −3: switch to positive, which agrees with the left arm pointing up. This matches −36, 8, −12, 48. A second way for one value: multiply out to f(x) = −2x3 − 2x2 + 12x, then f(1) = −2 − 2 + 12 = 8.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: For f(x) = (x + 1)(x − 2)2, drawing the curve through the x-axis at x = 2 so that it is below the axis to the right of 2.
    The exponent on (x − 2) is 2, which is even. The test points on both sides agree: f(1) = 2 and f(3) = 4 are both positive, so the graph never gets below the axis near 2.
    ✓ Instead: The graph comes down to (2, 0), touches the x-axis, and turns back up.
    ✗ Not this: For g(x) = (3 − x)(x + 1), saying the leading coefficient is positive because no minus sign sits in front, and drawing both arms up.
    The highest-power term of (3 − x) is −x. The leading term is (−x)(x) = −x2, so the leading coefficient is −1.
    ✓ Instead: Both arms point down. The zeros are −1 and 3. The test points agree: g(−2) = (5)(−1) = −5, g(0) = (3)(1) = 3, g(4) = (−1)(5) = −5. Below, above, below.
    ✗ Not this: Using a zero as a test point: for f(x) = (x + 1)(x − 2)2, testing x = 2, getting f(2) = 0, and not knowing what sign to write.
    A zero is the fence between two intervals. It is not inside either one, and 0 is neither positive nor negative.
    ✓ Instead: Pick a number strictly inside the interval, such as 0 or 1 for the interval between −1 and 2.
    ✗ Not this: Looking for zeros to mark for k(x) = x2 + 4 and getting stuck. This is a case where the method has no zeros to work with.
    x2 is never negative, so x2 + 4 is at least 4 for every x. The graph never meets the x-axis.
    ✓ Instead: With no zeros, the whole x-axis is one interval. One test point settles it: k(0) = 4, so the graph is above the axis everywhere. Both arms point up because the leading term is x2.
    ✗ Not this: Joining the plotted points with straight ruler lines, which makes a sharp corner at each point.
    A polynomial's graph is smooth. It bends gradually and never has a corner or a break.
    ✓ Instead: Draw one flowing curve through the points, rounded at every hill and valley.

    Tips and tricks

    • Memory device for the order: Zebras Must Yawn Every Tuesday. Zeros, Multiplicity, Y-intercept, Ends, Test points.
    • When 0 is not a zero, use it as a test point. f(0) is already the y-intercept, so one computation does two jobs.
    • If you only need the sign of a test point, count the negative factors. An odd count means negative, an even count means positive. A factor raised to an even power is never negative, so skip it in the count. A minus sign in front counts as one negative factor.
    • Free check: the leftmost and rightmost test points must agree with the arms. If the right arm should point up and your rightmost test point came out negative, recompute.
    • Free check: the sign must switch across every zero of odd multiplicity and stay the same across every zero of even multiplicity.
    • A sketch shows the shape and the points you computed. It does not show the exact height of a hill or the exact depth of a valley, so label the points you know and do not claim more.
    • When an output is large, such as −16 or 64, you do not need a tall sheet of paper. Squeeze the y-axis and write the coordinates beside the point.

    7 The trap

    Wrong: switch sides at every zero. Right: switch at odd multiplicity and keep the side at even multiplicity.

    Keep in mind

    • What a test asks from this lesson: graph a factored polynomial and label its x-intercepts, the multiplicity of each, its y-intercept and its end behavior.
    • Write the four answers before you draw: the intercepts as points, cross or touch at each, the point (0, f(0)), and the two arms.
    • End behavior with arrows, where → is read "goes to": left arm up and right arm down is written as x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞.

    Flash cards

    Say the answer out loud, then flip.

    Why can one test point speak for the whole stretch between two neighboring zeros?
    A polynomial's graph is one unbroken curve. To change sides of the x-axis it would have to pass through a zero, and there is no zero between neighbors. So the whole stretch stays above or stays below, like a trail that cannot switch sides of sea level without meeting it.
    A zero has even multiplicity. What does the graph do there, and what is the tempting wrong drawing?
    • It touches the x-axis and turns back the way it came, like a trail that dips to sea level and climbs back up.
    • The wrong drawing switches sides there. The graph switches sides only at a zero with odd multiplicity.
    For f(x) = (x + 1)2(x − 2), where does the graph touch the x-axis and where does it cross?
    • It touches at x = −1, because the exponent on (x + 1) is 2, which is even.
    • It crosses at x = 2, because the exponent on (x − 2) is 1, which is odd.
    • Check with test points: f(−2) = −4 and f(0) = −2 are both negative, so there is no side change at −1. f(3) = 16 is positive, so the side changes at 2.
    How do you get the degree and the leading term of f(x) = 2(x + 1)2(x − 2) without multiplying everything out?
    • Degree: add the exponents on the factors. 2 + 1 = 3.
    • Leading term: multiply the front number by the highest-power term of each factor. 2 · x2 · x = 2x3.
    • The degree and the sign of the leading coefficient tell you which way the two arms go.

    From earlier

    Zeros from the factored form

    What is a zero of a polynomial, and where does it show up on the graph?
    Show answer
    It is an input that gives the output 0.
    On the graph, a real zero c marks the point (c, 0) where the curve meets the x-axis.

    Zeros from the factored form

    Why does one factor equal to 0 make the whole product 0?
    Show answer
    Zero times any number is 0.
    It works like holiday lights wired in a row: one burned-out bulb makes the whole string go dark.