Quarry School

Domain and range trade places

Subject: MathematicsLeans on: What f^{−1} meansLeans on: Domain and rangeLeans on: One-to-one functionLeans on: Interval notationLeans on: Set bracesLeans on: What a square root allowsLeans on: No zero in a bottomLeans on: The union sign
Level 1 · FoundationsAbout 20 min read4 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Leans on

    Quick review (2 minutes)

    In plain words

    Picture a coat check.

    Rule

    If f is a one-to-one function, then: domain of f−1 = range of f, and range of f−1 = domain of f.

    Step

    1. Make sure f is a one-to-one function, so that f−1 exists: no output repeated in a table, or a graph that passes the horizontal line test.

    2. Find the domain of f: every input f allows.

    3. Find the range of f: every output f actually produces. List only outputs that really come out, not every number you can imagine.

    4. Trade the two lists. Domain of f−1 = range of f. Range of f−1 = domain of f.

    5. Check with one pair. Pick an allowed input a and compute b = f(a). Then f−1(b) = a, so b must sit in your new domain and a must sit in your new range.

    Question

    The function f(x) = x−2 + 1 is a one-to-one function, so it has an inverse function. Without finding a formula for f−1, find the domain and the range of f−1. In plain words: which numbers may go into f−1, and which numbers can come out of it?

    Answer

    Domain of f−1: [1, ∞)
    Range of f−1: [2, ∞)

    Trap

    Writing the domain of f again as the domain of f−1. The two functions trade their lists, and the two lists are often different. For f(x) = x−2 + 1 the tempting answer is 'domain of f−1: [2, ∞)', but [2, ∞) is what f−1 gives back, not what it takes in. To avoid this, write two labeled lines before you answer, 'goes into f−1' and 'comes out of f−1', and fill the first line from the outputs of f.

    Strategy

    1. Confirm that f is a one-to-one function, so an inverse function exists.

    2. List what goes into f: its domain.

    3. List what comes out of f: its range.

    4. Write the range of f as the domain of f−1, and the domain of f as the range of f−1. Keep each bracket with its own list.

    5. Test one pair: compute b = f(a) for an allowed a, then confirm b is in the new domain and a is in the new range.

    Term

    inverse function

    Definition

    A function that undoes another one. It takes each output of the first function back to the input it came from.

    Term

    one-to-one function

    Definition

    A function in which no two different inputs share an output. Every output comes from exactly one input, so the function can be undone.

    Term

    horizontal line test

    Definition

    A check done on a graph. If no horizontal line crosses the graph more than once, the function is a one-to-one function and has an inverse function.

    Term

    domain

    Definition

    The set of all inputs a function accepts. For an inverse function, the domain is the range of the original function.

    Term

    range

    Definition

    The set of all outputs a function actually produces. For an inverse function, the range is the domain of the original function.

    1 In plain words

    Picture a coat check. You hand over a coat and get a numbered ticket. The coats the counter will take are its domain: everything that is allowed to go in. The tickets it hands out are its range: everything that actually comes out. At the end of the night the counter runs backward. You hand over a ticket and get your coat back. That backward counter is the inverse function. What goes into it? Tickets, and only tickets that were handed out. What comes out? Coats, and only coats that were checked. So the two lists trade places. The inputs of the inverse are the outputs of the original, and the outputs of the inverse are the inputs of the original.

    2 Picture it

    123579function
    The left oval is the domain of f and the right oval is its range.

    Reminder

    Reminder: What f−1 means, Domain and range, One-to-one function, Interval notation, Set braces, What a square root allows, No zero in a bottom, The union sign
    • What f−1 means. f(a) = b says the same thing as f−1(b) = a. The −1 is a name, not a power. Example: f(6) = 3 gives f−1(3) = 6.
    • Domain and range. The domain is every input a function allows. The range is every output that actually comes out. For the squaring function, the domain is every number and the range is 0 and up, because a square is never negative.
    • One-to-one function. No two inputs share an output. Only a one-to-one function has an inverse function. On a graph, no horizontal line meets it twice.
    • Interval notation. [2, ∞) means every number from 2 up, with 2 included. A square bracket includes the end, a round bracket leaves it out, and ∞ always gets a round bracket. (−3, 7] leaves out −3 and includes 7.
    • Set braces. {5, 7, 9} means exactly the numbers 5, 7 and 9, and nothing between them.
    • What a square root allows. The inside of a square root must be 0 or more, and the root itself is never negative. x−2 needs x − 2 ≥ 0, so x ≥ 2, and its smallest value is 0 = 0.
    • No zero in a bottom. A fraction with 0 on the bottom has no value. In 1x−3, the input x = 3 is not allowed because it gives 10.
    • The union sign. The sign ∪ joins two pieces into one list. (−∞, 3) ∪ (3, ∞) means every number except 3.

    3 Why

    Start from what an inverse does: f(a) = b says the same thing as f−1(b) = a. A number b can go into f−1 only if there is some input a that f sent to b. That is exactly what it means for b to be an output of f. So the allowed inputs of f−1 are the outputs of f. In the same way, each answer f−1 gives is some a that f accepted, and every such a is given back from its own b. If you fed f−1 a number f never produced, there would be no input to send it back to.

    4 The rule

    If f is a one-to-one function, then: domain of f−1= range of f, and range of f−1= domain of f.

    The same idea, five ways

    Say it

    The domain of f inverse is the range of f. The range of f inverse is the domain of f.

    Write it

    Every number that f−1 accepts is a number that f produces, and every number that f−1 produces is a number that f accepts.

    In math
    • domain of f−1 = range of f
    • range of f−1 = domain of f
    • f(a) = b means f−1(b) = a: a is in the domain of f, and b is in the domain of f−1
    • a one-to-one f with domain [2, ∞) and range [1, ∞) gives f−1 with domain [1, ∞) and range [2, ∞)
    Like

    A coat check takes coats and gives tickets. Run backward, it takes tickets and gives coats.

    See it

    f takes in its domain and gives out its range

    f−1 takes in the range of f

    f−1 gives out the domain of f

    domain of f−1 = range of f

    range of f−1 = domain of f

    The same idea, other ways

    As two machines in a row

    Feed 2 into f, where f doubles a number and adds 3. Out comes 7. Feed that 7 straight into f−1, which subtracts 3 and halves. Out comes 2 again. Look at the 7 in the middle. It is an output of f and an input of f−1 at the same moment. Every number f−1 ever receives is a middle number like this one, so the inputs of f−1 are exactly the outputs of f.

    2f: double,then add 3f⁻¹: subtract3, then halvefirstsecond72
    The 7 between the machines is an output of f and an input of f−1 at once.
    With small numbers

    Look at the table. The input row is the domain of f and the output row is its range. The question f−1(7) asks: which input gave the output 7? Find the 7 in the output row and look up to its input, 2. So f−1(7) = 2. You can ask f−1 about any number in the output row, and it answers with a number from the input row. Now ask about 6. There is no 6 in the output row, so f−1(6) has no answer. The output row of f is the full list of what f−1 accepts.

    input xoutput f(x)152739↑ solve: output given, read every input above it
    The output row of f is the list of numbers f−1 accepts, and the input row is the list it gives back.
    As a story

    A thermometer function f turns Celsius into Fahrenheit by f(x) = 95x + 32, and you use it only for liquid water. It accepts readings from 0 to 100. It outputs readings from 32 to 212, since f(0) = 32 and f(100) = 180 + 32 = 212. The inverse turns Fahrenheit back into Celsius. It accepts 32 to 212 and returns 0 to 100. Ask it about 68 and it answers 20, because f(20) = 36 + 32 = 68. Ask it about 20 and it has no answer: 20°F is below freezing, so f never produced that number.

    As shadows on a graph

    Picture the graph of f(x) = x + 2. Press the graph flat onto the x-axis and it covers 0 and everything to the right: the domain of f, [0, ∞). Press it flat onto the y-axis and it covers 2 and everything above: the range of f, [2, ∞). The shadow on the y-axis is the list of numbers f−1 accepts. The shadow on the x-axis is the list of numbers f−1 gives back.

    domainrange2468246
    The shadow on the y-axis, from 2 up, is what f−1 takes in, and the shadow on the x-axis, from 0 right.
    As a rule of thumb

    Turn every question about f−1 into a question about f. 'Can f−1 take 7?' becomes 'Does f ever output 7?' 'Can f−1 give back 4?' becomes 'Does f accept 4?' You already know how to answer questions about f, so you never need the inverse itself to find its domain and range.

    FunctionGoes in (domain)Comes out (range)
    Coat checkcoatstickets
    Coat check run backwardticketscoats
    f(x)=x−2+1[2, ∞)[1, ∞)
    f−1[1, ∞)[2, ∞)

    5 How

    1. Make sure f is a one-to-one function, so that f−1 exists: no output repeated in a table, or a graph that passes the horizontal line test.
    2. Find the domain of f: every input f allows.
    3. Find the range of f: every output f actually produces. List only outputs that really come out, not every number you can imagine.
    4. Trade the two lists. Domain of f−1 = range of f. Range of f−1 = domain of f.
    5. Check with one pair. Pick an allowed input a and compute b = f(a). Then f−1(b) = a, so b must sit in your new domain and a must sit in your new range.

    Finding the domain and range of f−1 without finding f−1

    1
    Is f a one-to-one function (no output used by two inputs)?
    Yesf−1 exists. Go on.
    NoStop. There is no inverse function, so there is no domain or range to report.
    ↓
    2
    Is f given as a table or a list of pairs?
    YesThe input row is the domain of f and the output row is its range. Trade the two lists.
    NoGo on.
    ↓
    3
    Is f given as a graph?
    YesRead the shadow on the x-axis (the domain of f) and the shadow on the y-axis (the range of f). Trade them.
    NoGo on.
    ↓
    4
    Is f given as a formula?
    YesFind the inputs the formula allows (no zero in a bottom, no negative under a square root), then find which outputs come out. Trade them.
    NoUse whatever description you have to list the inputs and the outputs of f, then trade them.
    ↓
    5
    Does a test pair agree? Pick an allowed a and compute b = f(a).
    Yesb is in the domain of f−1 and a is in its range. You are done.
    NoEither a list was left in place instead of traded, or the range of f is wrong. Redo that step.
    1. Confirm that f is a one-to-one function, so an inverse function exists.
    2. List what goes into f: its domain.
    3. List what comes out of f: its range.
    4. Write the range of f as the domain of f−1, and the domain of f as the range of f−1. Keep each bracket with its own list.
    5. Test one pair: compute b = f(a) for an allowed a, then confirm b is in the new domain and a is in the new range.

    6 Worked example

    Worked example

    The domain and range of an inverse, with no formula for the inverse

    The function f(x) = x−2 + 1 is a one-to-one function, so it has an inverse function. Without finding a formula for f−1, find the domain and the range of f−1. In plain words: which numbers may go into f−1, and which numbers can come out of it?

    Show the steps and the answer
    (2, 1)(6, 3)domainrange2468101212345
    The shadow on the x-axis starts at 2, the domain of f, and the shadow on the y-axis starts at 1, the range of…
    1. Find the domain of f. The inside of the root must be 0 or more: x−2≥0, so x≥2. Domain of f: [2,∞).A negative number has no real square root. Solving x − 2 ≥ 0 finds the smallest input the root accepts. Plug it in to see: f(2) = 0 + 1 = 1, which works, while f(1) would need −1, which is not a real number.
    2. Find the range of f. The root x−2 is 0 at x=2 and grows without end as x grows. Adding 1 lifts every output by 1, so f(x)≥1. Range of f: [1,∞).A square root never comes out negative, so its smallest value is 0 and the smallest output of f is 0 + 1 = 1. The outputs then climb through every number above 1: f(2) = 1, f(3) = 2, f(6) = 3, f(11) = 4.
    3. Trade the first list. Domain of f−1= range of f=[1,∞).f−1 can only accept numbers that f actually produces, and those are the numbers from 1 up.
    4. Trade the second list. Range of f−1= domain of f=[2,∞).f−1 hands back the inputs of f, and those are the numbers from 2 up.
    Answer
    • Domain of f−1: [1, ∞)
    • Range of f−1: [2, ∞)
    Double-check Test one pair. f(6) = 6−2 + 1 = 4 + 1 = 2 + 1 = 3, so f−1(3) = 6. The input 3 is in [1, ∞) and the output 6 is in [2, ∞). Now test a number outside. Could f−1(0) exist? That would need x−2 + 1 = 0, so x−2 = −1, and a square root is never negative. So 0 is not allowed into f−1, which agrees with [1, ∞).

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 5

    A table

    The table shows a one-to-one function h. Find the domain and the range of h−1. In plain words: list the numbers you may feed to h−1, and list the numbers it can give back.

    input xoutput h(x)−24013856
    x:−2,0,3,5;h(x):4,1,8,6.
    Show the steps and the answer
    input xoutput h(x)−24013856↑ solve: output given, read every input above it
    The highlighted 8 in the output row is a number h−1 accepts, and the 3 above it is what h−1 gives back.
    1. Read the domain of h from the input row: {−2,0,3,5}.The input row lists every number h accepts.
    2. Read the range of h from the output row: {4, 1, 8, 6}, or in order {1, 4, 6, 8}.The output row lists every number h actually produces. No number appears twice there, which is why h is a one-to-one function.
    3. Trade them. Domain of h−1={1,4,6,8}. Range of h−1={−2,0,3,5}.h−1 takes each output of h back to the input it came from.
    Answer
    • Domain of h−1: {1, 4, 6, 8}
    • Range of h−1: {−2, 0, 3, 5}
    Double-check Find the 8 in the output row and look up to its input: h(3) = 8, so h−1(8) = 3. The 8 is in the new domain and the 3 is in the new range. Now try 2: no column has 2 in the output row, so h−1(2) has no answer, and 2 is not in the new domain.

    Rung 2 of 5

    A straight line on a limited stretch

    A taxi charges f(x) = 3x + 4 dollars for a ride of x miles and only takes rides from 0 to 10 miles, so the domain of f is [0, 10]. The inverse f−1 takes a fare and gives back the miles. Find the domain and the range of f−1. In plain words: which fares can you hand to f−1, and which mile counts can it return?

    Show the steps and the answer
    41934[4, 34]
    These are the fares the taxi can charge: the range of f, and so the domain of f−1.
    1. Write the domain of f: [0, 10].The question says the taxi accepts rides of 0 to 10 miles, both ends included.
    2. Find the lowest and highest outputs. f(0)=3·0+4=4 and f(10)=3·10+4=34.The fare climbs 3 dollars every mile, so the smallest fare belongs to the shortest ride and the largest fare to the longest ride.
    3. Write the range of f: [4, 34].A straight line has no gaps, so as x slides from 0 to 10 the fare passes through every number from 4 to 34. It never repeats a fare, so f is a one-to-one function.
    4. Trade them. Domain of f−1=[4,34]. Range of f−1=[0,10].f−1 takes fares in and gives miles out.
    Answer
    • Domain of f−1: [4, 34]
    • Range of f−1: [0, 10]
    Double-check A 5 mile ride costs f(5) = 3 · 5 + 4 = 19, so f−1(19) = 5. The 19 is in [4, 34] and the 5 is in [0, 10]. Try a fare outside the list: 40 dollars would need 3x + 4 = 40, so 3x = 36 and x = 12 miles, which the taxi does not drive. So 40 is not in the domain of f−1, which agrees with [4, 34].

    Rung 3 of 5

    A square root that is subtracted

    f(x) = 5 − x+4 is a one-to-one function. Find the domain and the range of f−1 without finding its formula. In plain words: which numbers does f produce, since those are the ones f−1 accepts, and which numbers does f accept, since those are the ones f−1 returns?

    Show the steps and the answer
    (−4, 5)(0, 3)domainrange−44812246
    The graph starts at height 5 and only falls, so its shadow on the y-axis is 5 and everything below.
    1. Find the domain of f. The inside of the root must be 0 or more: x+4≥0, so x≥−4. Domain of f: [−4,∞).A negative number has no real square root. Solving x + 4 ≥ 0 finds the smallest input the root accepts. Plug it in to see: f(−4) = 5 − 0 = 5, which works, while f(−5) would need −1.
    2. Find the range of f. The root x+4 starts at 0 and grows without end, so 5−x+4 starts at 5 and falls without end: f(−4)=5,f(0)=3,f(5)=2,f(12)=1. Range of f: (−∞,5].The root is never negative, and here it is taken away from 5. Taking away 0 or more leaves 5 or less. This is the gotcha: the range runs down from 5, not up from it.
    3. Trade them. Domain of f−1=(−∞,5]. Range of f−1=[−4,∞).The outputs of f are the inputs of f−1, and the inputs of f are its outputs. The square bracket at 5 and the square bracket at −4 each stay with their own list.
    Answer
    • Domain of f−1: (−∞, 5]
    • Range of f−1: [−4, ∞)
    Double-check f(0) = 5 − 4 = 5 − 2 = 3, so f−1(3) = 0. The 3 is in (−∞, 5] and the 0 is in [−4, ∞). Try a number outside: 6 would need 5 − x+4 = 6, so x+4 = −1, and a square root is never negative. So 6 is not in the domain of f−1.

    Rung 4 of 5

    A fraction with x in the bottom

    f(x) = 1x−3 + 2 is a one-to-one function. Find the domain and the range of f−1 without finding its formula. In plain words: find the one number f cannot take in and the one number f cannot give out, then trade the two lists.

    Show the steps and the answer
    −22468−2246
    The graph never sits over x = 3 and never reaches the height y = 2, the two numbers that get thrown out.
    1. Find the domain of f. Set the bottom equal to 0: x−3=0, so x=3. Throw that input out. Domain of f: (−∞,3)∪(3,∞), every number except 3.Setting the bottom equal to 0 finds the one input that would make the fraction divide by zero. Plug it in to see: f(3) = 10 + 2, and 10 has no value.
    2. Find the one output f can never give. The fraction 1x−3 is 1 divided by something, and that is never 0. So f(x)=1x−3+2 is never 0+2=2.A fraction equals 0 only when its top is 0, and the top here is always 1.
    3. See that every other output is reached. To get 3 you need 1x−3=1, which x=4 does: f(4)=1+2=3. To get 1 you need 1x−3=−1, which x=2 does: f(2)=−1+2=1. Any target other than 2 works the same way. Range of f: (−∞,2)∪(2,∞).For a target other than 2, the fraction must equal the target minus 2, which is not 0, and some x always makes 1x−3 equal a number that is not 0.
    4. Trade them. Domain of f−1=(−∞,2)∪(2,∞). Range of f−1=(−∞,3)∪(3,∞).The number f never outputs, 2, is the number f−1 cannot accept. The number f cannot accept, 3, is the number f−1 never gives back.
    Answer
    • Domain of f−1: (−∞, 2) ∪ (2, ∞), every number except 2
    • Range of f−1: (−∞, 3) ∪ (3, ∞), every number except 3
    Double-check f(5) = 15−3 + 2 = 12 + 2 = 52, so f−1(52) = 5. The input 52 is not 2 and the output 5 is not 3, so both fit. Then test the excluded number: f−1(2) would need 1x−3 + 2 = 2, so 1x−3 = 0, which never happens. So 2 is out of the domain of f−1.

    Rung 5 of 5

    Only the two lists, with open and closed ends

    A one-to-one function g has domain (−3, 7] and range [0, 12). (a) Find the domain and the range of g−1. (b) Does g−1(12) exist? (c) Does g−1(0) exist? (d) Could g−1(5) = 9? In plain words: no table, graph or formula is given, only the list of inputs and the list of outputs of g, and you must say what g−1 can take in and give out.

    0512[0, 12)
    These are the numbers g−1 accepts: the filled dot keeps 0 in and the open dot leaves 12 out.
    Show the steps and the answer
    1. (a) Trade the lists. Domain of g−1=[0,12). Range of g−1=(−3,7].The outputs of g are the inputs of g−1, and the inputs of g are its outputs. Each bracket stays with its own list.
    2. (b) Look for 12 in [0, 12). The round bracket leaves 12 out, so g−1(12) does not exist.g never outputs 12, so there is no input to send 12 back to.
    3. (c) Look for 0 in [0, 12). The square bracket includes 0, so g−1(0) exists. Its value is some number in (−3,7].0 is an output of g, so exactly one input produced it. The two lists alone do not say which input.
    4. (d) g−1(5) exists, because 5 is in [0, 12). Its value cannot be 9, because 9 is not in (−3,7].g−1(5) = 9 would mean g(9) = 5, and g does not accept 9.
    Answer
    • (a) Domain of g−1: [0, 12). Range of g−1: (−3, 7]
    • (b) No
    • (c) Yes, and its value lies in (−3, 7]
    • (d) No
    Double-check Turn each question into a question about g. Part (b) asks whether g ever outputs 12: no, the range [0, 12) stops short of 12. Part (c) asks whether g ever outputs 0: yes, 0 is in the range. Part (d) asks whether g(9) = 5 is possible: no, 9 is outside the domain (−3, 7]. All three agree with the answers.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: A thermometer function f turns Celsius into Fahrenheit for liquid water, so its domain is [0, 100]. Tempting: f−1 is the same function run backward, so its domain is [0, 100] too.
    f−1 takes Fahrenheit readings in, and those run from f(0) = 32 to f(100) = 212. The number 20 is in [0, 100], but f never outputs 20, so f−1(20) does not exist.
    ✓ Instead: Domain of f−1 = range of f = [32, 212]. Range of f−1 = domain of f = [0, 100].
    ✗ Not this: For f(x) = x−2 + 1: the outputs are y values, and y can be anything, so the range of f is every real number and f−1 accepts every number.
    The range is the list of outputs that actually come out, not every number you can name. A square root is never negative, so f(x) is never below 1. No input gives f(x) = 0, for example.
    ✓ Instead: The range of f is [1, ∞), so the domain of f−1 is [1, ∞).
    ✗ Not this: Let f double a number and add 3, but only for the inputs 1, 2 and 3. It is undone by 'subtract 3, then halve'. That rule can be done to any number, so f−1 accepts any number, for example f−1(6) = 1.5.
    The undoing rule can be carried out on 6, but f never produced 6: its outputs are only 5, 7 and 9. And 1.5 was never an input of f. Being able to compute a rule does not put a number in the domain.
    ✓ Instead: The domain of f−1 is {5, 7, 9}, the range of f, and its range is {1, 2, 3}. f−1(6) does not exist.
    ✗ Not this: g(x) = x2 accepts every number and outputs 0 and up, so g−1 has domain [0, ∞) and range every real number.
    The trade applies only when an inverse function exists. Here g(3) = 9 and g(−3) = 9, so two inputs share an output and g is not a one-to-one function. There is no inverse function to have a domain.
    ✓ Instead: Check that the function is a one-to-one function first. If it is not, there is no inverse function, and so no domain or range to report.

    Tips and tricks

    • Memory cue: what f gives out, f−1 takes in. Outs become ins, and ins become outs.
    • You do not need a formula for f−1 to know its domain and range. Everything comes from f.
    • To test one number, turn the question around. 'Is 7 in the domain of f−1?' is the same question as 'Does f ever output 7?'
    • Brackets travel with their list. If the range of f is [1, ∞), the domain of f−1 is [1, ∞), with the same closed end at 1.
    • The trade works in both directions, because f is the inverse of f−1. Knowing the domain and range of either function gives you both for the other.
    • When a later lesson gives you a formula for f−1, still take its domain from the range of f. A formula can look as if it accepts more numbers than the inverse really does.

    7 The trap

    Writing the domain of f again as the domain of f−1. The two functions trade their lists, and the two lists are often different. For f(x) = x−2 + 1 the tempting answer is 'domain of f−1: [2, ∞)', but [2, ∞) is what f−1 gives back, not what it takes in. To avoid this, write two labeled lines before you answer, 'goes into f−1' and 'comes out of f−1', and fill the first line from the outputs of f.

    Flash cards

    Say the answer out loud, then flip.

    f is a one-to-one function. Where do you get the domain of f−1?
    From the range of f. The backward coat check takes in tickets, and only the tickets that were handed out.
    You know f(4) = 9, and f is a one-to-one function. Which number goes into f−1, and which comes out?
    • 9 goes in, so 9 is in the domain of f−1.
    • 4 comes out, so 4 is in the range of f−1.
    • Reason: f(4) = 9 says the same thing as f−1(9) = 4.
    f(x) = x−2 + 1 has domain [2, ∞) and range [1, ∞). What are the domain and range of f−1?
    • Domain of f−1: [1, ∞)
    • Range of f−1: [2, ∞)
    • The two lists trade places. [2, ∞) is what f−1 gives back, not what it takes in.
    Why can you not put a number into f−1 that f never produced?
    There is no input for f−1 to send it back to. It is like handing over a ticket the counter never gave out: no coat is waiting for it.

    Comes back in