Inverse trigonometric functions
Levels 1–2 · estimatedThis unit runs sine, cosine and tangent backward: you start with a number and look for the angle. Because each trig function repeats, many angles share one value, so the unit first cuts each graph down to a piece that never repeats; the one angle that piece gives for a number is the principal value. With those cuts in place you meet the inverse sine, the inverse cosine and the inverse tangent, and a four-step way to find exact values from the special angles, the sign of the input and the quadrant. Then the functions are put together, one inside another, where they undo each other only under conditions, and inside a right triangle. The unit ends at the calculator, which shows the principal value and never the other answers.
Lessons
Read the whole unit on one page
- Why a trig function needs its domain cut before it can have an inverseLevel 2 · Building
- The inverse sineLevel 1 · Foundations
- The inverse cosineLevel 1 · Foundations
- The inverse tangentLevel 1 · Foundations
- Exact values by the sign and the quadrantLevel 1 · Foundations
- A function and its inverse undo each other, with conditionsLevel 1 · Foundations
- Mixing the functions with a right triangleLevel 1 · Foundations
- Inverse values on a calculator, and why one answer is not all the answersLevel 2 · Building
Vocabulary
- one-to-one function
- A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion. Like: A coat check where each ticket number belongs to exactly one coat.
- horizontal line test
- A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands. Like: Sliding a level ruler up a graph and watching for a double hit.
- restricted domain
- A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse. Like: Trimming a looping road to one stretch that never doubles back.
- inverse function
- The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x. Like: Retracing your steps home: the same path, walked in the opposite direction.
- principal value
- The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main. Like: A building has many doors, but its street address names one main entrance.
- inverse sine (arcsin)
- The function that takes a number from −1 to 1 and gives back the angle from − to whose sine is that number. Written arcsin x or x; said ark-SINE. Like: A height-to-angle machine: give it a height on the unit circle, and it gives back the turn.
- inverse cosine (arccos)
- The function that takes a number from −1 to 1 and gives back the angle from 0 to π whose cosine is that number. Written arccos x or x; said ark-KOH-sine. Like: A left-right-to-angle machine: give it a left-right position on the unit circle, and it gives back the turn.
- inverse tangent (arctan)
- The function that takes any real number and gives back the angle strictly between − and whose tangent is that number. Written arctan x or x; said ark-TAN-jent. Like: A steepness-to-angle machine: tell it how steep a ramp is, and it gives the ramp's angle.
- reference angle
- The angle between an angle's ending side and the nearest part of the x-axis, always from 0 to . Angles with the same reference angle share the same trig values, up to sign. Like: How far a clock hand sits from the nearer of the 3 and the 9.
Quick checks
Quick check 1 of 7
Evaluate arcsin() exactly.
Show the steps and the answer
- Why: sin() = , and lies in [−, ].
Quick check 2 of 7
Evaluate arccos(−) exactly.
Show the steps and the answer
- Why: the reference angle is , a negative input sends the inverse cosine into quadrant II, and π − = ; cos() = −.
Quick check 3 of 7
Evaluate arctan(−) exactly.
Show the steps and the answer
- Why: tan() = , and a negative input gives a negative angle in (−, ); tan(−) = −.
Quick check 4 of 7
Give the value of each, if it has one: sin(arcsin(0.8)) and sin(arcsin(1.8)).
Show the steps and the answer
- sin(arcsin(0.8)) = 0.8
- sin(arcsin(1.8)) has no value
- Why: 0.8 is in [−1, 1], so the inverse sine finds an angle and the sine undoes it; no angle has a sine of 1.8.
Quick check 5 of 7
Evaluate sin(arctan()) exactly.
Show the steps and the answer
- Why: the angle is in quadrant I with opposite 5 and adjacent 12, so the hypotenuse is = = 13, and sine is opposite over hypotenuse.
Quick check 6 of 7
Evaluate cos(arcsin(−)) exactly.
Show the steps and the answer
- Why: the angle is in quadrant IV with opposite −12 and hypotenuse 13, so the adjacent side is = = 5, positive because it points right.
Quick check 7 of 7
In radian mode a calculator shows (0.25) ≈ 0.2527. Find the other solution of sin t = 0.25 in [0, 2π), to four decimal places.
Show the steps and the answer
- t ≈ 2.8889
- Why: sine is positive in quadrants I and II, and the quadrant II angle with the same reference angle is π − 0.2527 ≈ 3.1416 − 0.2527 = 2.8889.
Before you start
- The special angles on the unit circle
Picture a Ferris wheel with radius 1 and its hub at (0, 0). You board at the far right, (1, 0), and the wheel turns counterclockwise through an angle θ (theta). Where your seat stops, its left-right position x is cos θ, its height y is sin θ, and tan θ = . Three stops carry the special numbers: (30°) puts the seat at (, ), (45°) at (, ), and (60°) at (, ); 0 and give (1, 0) and (0, 1). The four quarters of the plane are the quadrants, numbered I to IV counterclockwise from the upper right. Every other special stop mirrors one of these into another quadrant: same two numbers, new signs. A negative angle turns the wheel clockwise.
- Reflecting a graph over the line y = x
A function is a machine: one input goes in, one output comes out. Its inverse is the same machine run backward: feed in the output and get back the input. On a graph, every point (a, b) swaps its two numbers and becomes (b, a). Picture the graph drawn in wet ink, then fold the paper along the diagonal line y = x, the line through (0, 0), (1, 1) and (2, 2): each point prints onto its mirror image, with its coordinates swapped. The trouble comes when two inputs share an output. Run backward, that output would have to return two different inputs, like a vending machine button that drops two different snacks, and a function is not allowed to do that.
- Interval notation and the two kinds of bracket
An interval is an unbroken stretch of the number line, like the stretch of highway between two exits. Interval notation writes it in shorthand: the left end, a comma, the right end, wrapped in brackets. The bracket on each side tells you whether that end belongs. A square bracket, [ or ], means the end is included, like a ride open to ages 13 to 19 with both ages allowed. A round bracket, ( or ), means you may come as close as you like to that end but never stand on it. Infinity, ∞, always gets a round bracket, because it is a direction, not a number you can land on.