Quarry School

Trigonometry / Inverse trigonometric functions

Inverse trigonometric functions

Subject: Mathematics

All 8 lessons, in order.

The unit at a glance

  1. Why a trig function needs its domain cut before it can have an inverse

    A function is a machine: one input goes in, one output comes out.

  2. The inverse sine

    Sine takes an angle and gives back a height.

  3. The inverse cosine

    Picture a protractor, the half-circle ruler for measuring angles, with its straight edge at the bottom.

  4. The inverse tangent

    Think of a ramp.

  5. Exact values by the sign and the quadrant

    Finding an exact inverse value is like giving a taxi driver an address in two parts.

  6. A function and its inverse undo each other, with conditions

    Picture a Ferris wheel of radius 1 turning counterclockwise.

  7. Mixing the functions with a right triangle

    Picture a ladder 5 feet long leaning on a wall, its top 3 feet up.

  8. Inverse values on a calculator, and why one answer is not all the answers

    Picture a Ferris wheel.

Rules (8)
  • Why a trig function needs its domain cut before it can have an inverse

    Horizontal line test: a function has an inverse function exactly when no horizontal line crosses its graph more than once. A function that passes is called a one-to-one function. Every trig function repeats, so each one fails the test and must be cut first. Sine is cut to the restricted domain [−π2, π2], where sin θ takes every value in [−1, 1] exactly once.

  • The inverse sine

    y = arcsin x, also written y = sin−1 x, means sin y = x and −π2 ≤ y ≤ π2.
    Domain: [−1, 1]. Range: [−π2, π2], which is −90° to 90°.

  • The inverse cosine

    The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0, π]. So y = arccos x, also written y = cos−1 x, means cos y = x and 0 ≤ y ≤ π.
    Domain of arccos: [−1, 1]. Range of arccos: [0, π].

  • The inverse tangent

    y = arctan x, also written y = tan⁻¹ x, means tan y = x and −π2 < y < π2.
    Domain: all real numbers, (−∞, ∞). Range: (−π2, π2), with both ends left out. Horizontal asymptotes: y = −π2 and y = π2.

  • Exact values by the sign and the quadrant

    Let r be the reference angle: the angle from 0 to π2 whose sine, cosine or tangent (the one being undone) equals the input without its minus sign. A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π − r for arccos. In symbols: arcsin(−x) = −arcsin x, arctan(−x) = −arctan x, arccos(−x) = π − arccos x. The result is the principal value: the one angle inside the range.

  • A function and its inverse undo each other, with conditions

    sin(arcsin x) = x for x in [−1, 1] (undefined for other x); arcsin(sin x) = x for x in [−π2, π2], and for any other x it is the angle in [−π2, π2] with the same sine.
    cos(arccos x) = x for x in [−1, 1] (undefined for other x); arccos(cos x) = x for x in [0, π], and for any other x it is the angle in [0, π] with the same cosine.

  • Mixing the functions with a right triangle

    For an expression such as cos(arcsin a): let θ = arcsin a, the principal value; draw θ in the quadrant that its range and the sign of a allow; label two sides from a, with a minus sign on a leg that points left or down; find the third side from adj2 + opp2 = hyp2; then read sin θ = opphyp, cos θ = adjhyp or tan θ = oppadj. When θ lands on an axis (a = 0, or a = 1 or −1 for arcsin and arccos) there is no triangle: read the value from the point on the unit circle, for example cos(arcsin 1) = cos π2 = 0. For a letter: cos(arcsin x) = 1−x2, for −1 ≤ x ≤ 1.

  • Inverse values on a calculator, and why one answer is not all the answers

    The sin⁻¹, cos⁻¹ and tan⁻¹ keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin⁻¹ k in [−π2, π2], cos⁻¹ k in [0, π], tan⁻¹ k in (−π2, π2), named in the units the mode is set to.
    On [0, 2π), sin t = k and cos t = k have two solutions when −1 < k < 1, one when k = 1 or k = −1, and none when k < −1 or k > 1; tan t = k has two for every k. With the reference angle α = the key pressed on |k|, the solutions are the angles among α, π − α, π + α and 2π − α (in degrees α, 180° − α, 180° + α, 360° − α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0, 2π) that solves the equation (sin t = 0 at 0 and π, cos t = 0 at π2 and 3π2, tan t = 0 at 0 and π).

Recipes (8)
  • Why a trig function needs its domain cut before it can have an inverse
    1. Say in plain words what is asked: can the function be run backward, that is, does each output come from only one input?
    2. Picture the graph with inputs across and outputs up. For sine it is the wave that rises to 1 at π2, falls to −1 at 3π2 and repeats every 2π.
    3. Slide a horizontal line from the bottom of the graph to the top and watch for any height where it touches two or more points.
    4. If it ever does, write the proof as a pair: two inputs with one shared output, such as sin(π6) = sin(5π6) = 12. The function is not a one-to-one function, so on that domain it has no inverse function.
    5. To repair a smooth wave like sine, keep a stretch of inputs with no turn inside it that still reaches every output. For sine that stretch is the restricted domain [−π2, π2].
    6. Check the stretch: evaluate sine at its ends and its middle, sin(−π2) = −1, sin 0 = 0 and sin(π2) = 1, then slide the horizontal line again; each height from −1 to 1 should touch once.
  • The inverse sine
    1. Turn the question into a sine question: y = arcsin x asks for the angle y from −π2 to π2 with sin y = x. The input x is a height; the answer y is an angle.
    2. Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.
    3. Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.
    4. Check the answer: it lies between −π2 and π2, and its sine gives back x.
  • The inverse cosine
    1. Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
    2. Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
    3. Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to π2. An input of 0 puts it straight up, at π2. A negative input puts it on the top-left quarter, so the answer is past π2, up to π.
    4. In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
    5. Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.
  • The inverse tangent
    1. Read arctan(a) as a question: which angle, strictly between −π2 and π2, has tangent a? The input a is a tangent value, a steepness. The answer is an angle.
    2. If a has a square root in its bottom, rewrite it to match the table: 13 = 33.
    3. Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.
    4. Find a in the tan θ column of the table and read the angle at the start of its row.
    5. Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between −π2 and π2.
  • Exact values by the sign and the quadrant
    1. Name the reference angle: cover any minus sign and find the special angle from 0 to π2 whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
    2. Read the sign of the input: zero, positive or negative.
    3. Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−π2) for arcsin, the left end (π) for arccos.
    4. Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: −π2 for arcsin(−1), π for arccos(−1).
    5. Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.
  • A function and its inverse undo each other, with conditions
    1. Say what the problem asks, reading from the inside out: arcsin(sin θ) means 'take the sine of θ, then find the angle in [−π2, π2] with that sine'.
    2. Name the outside function; it decides the test. A trig function outside needs the number inside to be one its inverse accepts: from −1 to 1 for sin and cos, any number for tan. An inverse outside needs the angle inside to lie in its range: [−π2, π2] for arcsin, [0, π] for arccos, (−π2, π2) for arctan.
    3. If the test passes, the two undo each other, and the answer is the number or angle you started with.
    4. If a trig function is outside and the test fails, the inverse does not exist there: write undefined.
    5. If an inverse is outside and the test fails, do not cancel. First make sure the inside value exists: tan(π2) does not, so arctan(tan(π2)) is undefined. Then find the inside value exactly from the unit circle, then find the angle in the range with that value by the four-step method of the last lesson.
    6. Check: with an inverse outside, the answer lies in that inverse's range, and its sine, cosine or tangent equals the inside value; with sin, cos or tan outside, the answer is the number inside the inverse, which that inverse had to accept.
  • Mixing the functions with a right triangle
    1. Say it in words and name the inside angle: cos(arcsin(35)) is the cosine of θ, where θ = arcsin(35), so sin θ = 35.
    2. Pick θ's quadrant from the table: a positive input gives Quadrant I; a negative input gives Quadrant IV for the inverse sine and the inverse tangent, and Quadrant II for the inverse cosine. An input of 0, 1 or −1 to the inverse sine or inverse cosine, or 0 to the inverse tangent, puts the angle on an axis: read those from the unit circle.
    3. Draw θ from the positive x-axis into that quadrant, and drop a line from the end of its slanted side to the x-axis. The right triangle this makes has the reference angle at the origin; giving its legs signs turns its ratios into the values for θ itself.
    4. Label the two sides the input gives: a sine gives opphyp, a cosine gives adjhyp, a tangent gives oppadj. A leg that points left or down is negative; the hypotenuse is always positive.
    5. Find the third side with adj2 + opp2 = hyp2: take the positive square root, then give a leg the sign of the direction it points.
    6. Read the outside function as a ratio of the signed sides with SOH-CAH-TOA, then check the sign with All Silver Tea Cups.
  • Inverse values on a calculator, and why one answer is not all the answers
    1. Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
    2. Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is π2; degree mode shows 90.
    3. Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
    4. Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
    5. Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
    6. Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.
Traps (8)
  • Why a trig function needs its domain cut before it can have an inverse

    Cutting sine to [0, π], the top half of the circle, because it looks like a natural half. On [0, π] sine climbs and then falls, so sin(π6) = sin(5π6) = 12 still repeats, and it never reaches a negative height. Sine's piece is the right half of the circle, from the bottom to the top: [−π2, π2]. Say it to yourself: sine climbs the right side.

  • The inverse sine

    Answering with an angle outside the range. For arcsin(−12) it is tempting to write 7π6 or 11π6: both have sine −12, but neither lies between −π2 and π2. The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −π6. Before you write any arcsin answer, check that it lies in that stretch.

  • The inverse cosine

    Answering a negative input with a negative angle, the way the inverse sine does: arccos(−12) = −π3 is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past π2, up to π: here 2π3. Catch the slip by taking the cosine of what you wrote: cos(−π3) = +12, the wrong sign.

  • The inverse tangent

    Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of 3π4, of 7π4 and of −π4, and it is tempting to write the first one that comes to mind. Only the principal value, −π4, lies strictly between −π2 and π2, so arctan(−1) = −π4. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.

  • Exact values by the sign and the quadrant

    The most common slip here is the right point with the wrong name. For arcsin(−22) many people write 7π4, because the unit circle they learned runs from 0 to 2π. The point is right, but 7π4 is not between −π2 and π2, so it is not the principal value. Name the same point by turning clockwise: −π4. And 5π4, in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.

  • A function and its inverse undo each other, with conditions

    Canceling on sight. arcsin and sine look as if they cross out, so it is tempting to write arcsin(sin(5π6)) = 5π6. Before you cancel, test the angle against the range of the outside inverse. 5π6 is past π2 = 3π6, so it fails; work from the inside instead: sin(5π6) = 12, then arcsin(12) = π6.

  • Mixing the functions with a right triangle

    Drawing every triangle in Quadrant I. A negative input moves the inside angle: to Quadrant IV for the inverse sine and the inverse tangent, to Quadrant II for the inverse cosine, and one leg turns negative. An input of −1 to the inverse sine or cosine puts the angle on an axis instead, where no triangle forms; read that answer from the unit circle. Skip this and you get the right size with the wrong sign: 125 instead of −125 for tan(arccos(−513)). Decide the quadrant before you draw anything.

  • Inverse values on a calculator, and why one answer is not all the answers

    The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
    The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.

Lesson 1 of 8

Why a trig function needs its domain cut before it can have an inverse

Subject: MathematicsLeans on: What a function isLeans on: The vertical line testLeans on: Sine on the unit circleLeans on: The graph of sineLeans on: Reflecting over the line y = xLeans on: Square and round bracketsLeans on: Full turns and negative anglesLeans on: Comparing fractions of πLeans on: Squaring a negative numberOpen this lesson
Leans on 0Comes back in 0

1 In plain words

A function is a machine: one input goes in, one output comes out. An inverse function runs the machine backward: you hand it an output and it hands back the input. That can only work if no two inputs share an output. Picture a seat on a Ferris wheel. Its height above the hub works like the sine of the angle the wheel has turned. On every lap the seat passes most heights twice, once going up and once coming down, and the laps repeat forever. Hearing only that the seat is level with the hub, you cannot tell where it is. So everyone agrees to watch one stretch: the climb from the bottom to the top. On that climb, each height happens exactly once.

2 Picture it

π/65π/613π/617π/6π2π3π4π−11π/65π/613π/617π/6π2π3π4π−11
In two laps alone, the dashed line at height 12 crosses the sine wave four times, at π6, 5π6, 13π6 and 17π6.

Reminder

Reminder: What a function is, The vertical line test, Sine on the unit circle, The graph of sine, Reflecting over the line y = x, Square and round brackets, Full turns and negative angles, Comparing fractions of π, Squaring a negative number
  • What a function is. Each input gets exactly one output: the angle π6 goes in, and sin(π6) = 12 is the one height that comes out.
  • The vertical line test. A graph is a function when no vertical line crosses it twice. A circle is not one: the vertical line through its center crosses it at the top and at the bottom.
  • Sine on the unit circle. sin θ is the height, the y-coordinate, of the point at angle θ: at θ = π2 the point is the top, (0, 1), so sin(π2) = 1.
  • The graph of sine. Angle across, height up: (0, 0), up to (π2, 1), down through (π, 0) to (3π2, −1), back to (2π, 0), then the same wave again.
  • Reflecting over the line y = x. Swap the two coordinates of each point: (π6, 12) on the sine graph becomes (12, π6) on its mirror image.
  • Square and round brackets. A square bracket keeps the end, a round one leaves it out: [−1, 1] contains −1 and 1, and (−1, 1) does not.
  • Full turns and negative angles. Adding 2π is one more full turn and lands on the same point: π6 + 2π = 13π6. A negative angle turns clockwise: −π2 lands at the bottom, (0, −1).
  • Comparing fractions of π. Give both the same bottom first: π2 = 3π6, so 5π6 is bigger than π2 because 5 > 3.
  • Squaring a negative number. A negative times a negative is positive: (−2)2 = (−2) · (−2) = 4, the same as 22 = 4.

3 Why

An inverse sends each output back to the one input that made it. Sine breaks this: sin(π6) and sin(5π6) are both 12, and adding 2π to either angle gives 12 again. So 12 would have to go back to infinitely many angles, and a machine with many answers to one question is not a function. The mirror shows it: flip the sine graph over the line y = x and a vertical line hits it again and again. We cannot change what sine does, so we change where we look: keep one stretch where sine never repeats yet still reaches every height from −1 to 1.

4 The rule

Horizontal line test: a function has an inverse function exactly when no horizontal line crosses its graph more than once.

A function that passes is called a one-to-one function. Every trig function repeats, so each one fails the test and must be cut first. Sine is cut to the restricted domain [−π2, π2], where sin θ takes every value in [−1, 1] exactly once.

The same idea, five ways

Say it

On the angles from minus pi over two to pi over two, sine is one-to-one: it hits every height from minus one to one exactly once.

Write it

The sine function, restricted to the angles θ with −π2 ≤ θ ≤ π2, is a one-to-one function whose outputs are all the numbers from −1 to 1.

In math
  • −π2≤θ≤π2
  • [−π2,π2]
  • {θ|−π2≤θ≤π2}
  • sin a = sin b only when a = b, for a and b in [−π2, π2]
  • outputs: −1 ≤ sin θ ≤ 1, that is [−1, 1]
  • graph words: the rising arc from (−π2, −1) to (π2, 1)
Like

Like agreeing to describe a Ferris wheel seat only on its climb up the right side, from the bottom to the top: then its height alone tells you exactly where it is.

See it
−π/20π/2
Filled dots at both ends: the restricted domain keeps −π2 and π2.

The same idea, other ways

As a picture

Draw the sine wave and slide a ruler, held flat, from the bottom of the wave to the top. At height 12 it touches the wave at π6, 5π6, 13π6, 17π6 and on forever: sine fails the horizontal line test. Now erase everything except the rising arc from (−π2, −1) to (π2, 1). Slide the ruler again: at every height from −1 to 1 it touches the arc exactly once.

(−π/2, −1)(π/2, 1)domainrange−π/2π/2−11
The arc that is kept.
As a story

You ride a Ferris wheel whose hub is at height 0 and whose seat is 1 unit from the hub, so your height is the sine of the angle the wheel has turned. On each lap you reach the height 12 twice: once on the right side going up, at π6, and once on the left side coming down, at 5π6. A photo that shows only your height cannot tell those two moments apart. If everyone agrees to talk only about the climb up the right side, from the bottom to the top, each height names exactly one moment of the ride.

x = cos θy = sin θ5π/6
At 5π6 the seat is on the left side, coming down, at height 12: the same height it had at π6 on the way up.
With small numbers

Look at the table of sine values: the output row holds three 0s, under the inputs 0, π and 2π. Three inputs, one output. A backward machine handed the number 0 would have three angles to choose from and no rule for choosing, so it could not be a function. On the kept piece [−π2, π2], only θ = 0 still has height 0, because π and 2π are both bigger than π2.

input θoutput sin θ00π/21π03π/2−12π0↑ solve: output given, read every input above it
The three 0s in the output row point up to three different inputs: 0, π and 2π.
Why it must be true

Running a function backward is the same as reflecting its graph over the line y = x: each point (θ, height) becomes (height, θ). The points (π6, 12) and (5π6, 12) become (12, π6) and (12, 5π6): one input, 12, with two outputs. The vertical line x = 12 crosses the reflected graph more than once, so the reflection is not a function. The only way out is to keep fewer points: a piece of the graph where no two points share a height.

−202−202
A vertical line that crosses a graph more than once means the graph is not a function.
As a rule of thumb

For a smooth wave like sine: if the graph turns around, going up and then down or down and then up, it fails the horizontal line test, because the heights near the turn are visited once on each side of it. So keep a stretch that runs from one turn to the next with no turn inside. For sine, the bottom at −π2 and the next top at π2 mark that stretch.

π/2π3π/22π−11
The top at π2 and the bottom at 3π2 are turns, and heights repeat on the two sides of each one.
Angles keptDoes a height repeat?Heights reachedCan sine be run backward on all of [−1, 1]?
[0, 2π], one full lapYes: sin(π6) = sin(5π6) = 12[−1,1]No: heights repeat
[0, π], the top halfYes: sin(π6) = sin(5π6) = 12[0, 1]No: heights repeat, and no negative heights
[0, π2], a quarter lapNo[0, 1]No: no negative heights
(−π2, π2), ends left outNo(−1,1)No: −1 and 1 are missing
from π2 to 3π2, ends keptNo[−1,1]It would work, but it is not the agreed piece
[−π2, π2], the right halfNo[−1,1]Yes: the agreed restricted domain

5 How

  1. Say in plain words what is asked: can the function be run backward, that is, does each output come from only one input?
  2. Picture the graph with inputs across and outputs up. For sine it is the wave that rises to 1 at π2, falls to −1 at 3π2 and repeats every 2π.
  3. Slide a horizontal line from the bottom of the graph to the top and watch for any height where it touches two or more points.
  4. If it ever does, write the proof as a pair: two inputs with one shared output, such as sin(π6) = sin(5π6) = 12. The function is not a one-to-one function, so on that domain it has no inverse function.
  5. To repair a smooth wave like sine, keep a stretch of inputs with no turn inside it that still reaches every output. For sine that stretch is the restricted domain [−π2, π2].
  6. Check the stretch: evaluate sine at its ends and its middle, sin(−π2) = −1, sin 0 = 0 and sin(π2) = 1, then slide the horizontal line again; each height from −1 to 1 should touch once.

Checking whether a piece of a graph can be run backward

1
Does some horizontal line cross the piece two or more times?
YesHeights repeat, so the piece fails. Shorten it so no top or bottom sits inside it.
NoNo repeats. Go on.
↓
2
Does the piece reach every height the full function reaches (for sine, every number from −1 to 1, ends included)?
YesNothing is missing. Go on.
NoSome heights would have no input to go back to. Widen the piece, or change a round bracket to a square one if an end is missing.
↓
3
Is it the agreed piece (for sine, [−π2, π2])?
YesUse it: this is the restricted domain.
NoIt may work, but answers would not match anyone else's. Use the agreed piece.
  1. Write the piece as an interval of inputs, for example [0, π].
  2. Repeat check: look for a top or a bottom strictly inside the piece, or for two inputs with the same output. Either one means some horizontal line crosses twice.
  3. Coverage check: find the outputs at the two ends and at any top or bottom, then list every height the piece reaches. Compare that with every height the full function reaches; for sine that is [−1, 1].
  4. Ends check: if a needed height appears only at an end of the piece, that end must be kept, with a square bracket.
  5. Agreement check: among the pieces that pass, use the agreed one, so your answers match everyone else's. For sine it is [−π2, π2].

6 Worked example

Worked example

Sine fails the test, and the kept piece passes

(a) Find two angles with the same sine, and use them to show that sine fails the horizontal line test.
(b) Show that on the angles −π2 ≤ θ ≤ π2, sine takes every value in [−1, 1] exactly once.

Show the steps and the answer
x = cos θy = sin θπ/6
The point at π6 is (32, 12): its height is 12.
x = cos θy = sin θ5π/6
Its mirror image across the vertical axis, at 5π6, is (−32, 12): the same height, 12.
(−π/2, −1)(π/2, 1)domainrange−π/2π/2−11
The kept piece climbs from height −1 to height 1 and never turns back.
  1. Say what part (a) asks: find one height that two different angles share. Say what part (b) asks: on the kept angles, show that no height repeats and that no height from −1 to 1 is missing.A horizontal line at height h touches the sine graph at every angle whose sine is h, so a shared height is a horizontal line that touches twice.
  2. Start with the special angle π6. Its point on the unit circle is (32,12), so sin(π6)=12.Sine is the height, the y-coordinate, of the point on the unit circle, and π6 is the 30° special angle.
  3. Mirror that point across the vertical axis: (32,12) becomes (−32,12). This new point stops π6 short of the half turn π, so its angle is π−π6=6π6−π6=5π6.A mirror across the vertical axis keeps the height and swaps right for left. To subtract, write π as 6π6 so both fractions have the bottom 6.
  4. So sin(5π6)=12 as well: the horizontal line y=12 touches the sine graph at θ=π6 and at θ=5π6.Both points have the same height, 12.
  5. Answer (a): two different angles share the output 12, so sine fails the horizontal line test and is not a one-to-one function.The test fails as soon as one horizontal line touches twice, so one pair is a complete proof.
  6. It is worse than two: π6+2π=π6+12π6=13π6 lands on the same point, so sin(13π6)=12 too, and every further full turn adds another angle.2π is one full turn, and a full turn ends where it started.
  7. For (b), place the kept angles on the circle: θ=−π2 is the bottom, (0,−1); θ=0 is the right end, (1, 0); θ=π2 is the top, (0, 1).−π2 is a quarter turn clockwise from (1, 0), and π2 is a quarter turn counterclockwise.
  8. As θ grows from −π2 to π2, the point travels up the right half of the circle, from the bottom to the top. Its height climbs the whole way.On the right half each counterclockwise step lifts the point; the height starts to fall only after the top, and the top is where the piece ends.
  9. No repeats: a height that only climbs never returns to a value it already had, so every horizontal line touches the kept piece at most once.That is what passing the horizontal line test means.
  10. Nothing missing: the height moves smoothly from −1 up to 1, so it passes through every value in between, and the square brackets keep both ends, where the heights are −1 and 1.Like an elevator riding from the lowest floor to the highest: it passes every level on the way, and both end floors are part of the ride.
  11. Look back at the pair from (a): π6 is in the kept piece, but 5π6 is not, because π2=3π6 and 5π6 is bigger than 3π6. The cut threw the duplicate away.To compare fractions of π, give them the same bottom and compare the tops: 5 > 3.
Answer
  • (a) sin(π6) = sin(5π6) = 12, so the line y = 12 crosses the sine graph twice: sine fails the horizontal line test.
  • (b) On [−π2, π2] the height climbs from −1 to 1 without turning back, so each value in [−1, 1] is taken exactly once.
Double-check Second way, from the graph. (a) The sine wave rises to its top at θ = π2 and comes down the same way it went up, so two angles the same distance before and after π2 have the same height. π6 sits π3 before the top, since π2 − π6 = 3π6 − π6 = 2π6 = π3, and 5π6 sits π3 after it, since 5π6 − π2 = 5π6 − 3π6 = 2π6 = π3, so their heights match. (b) Evaluate the ends and the middle: sin(−π2) = −1, sin 0 = 0, sin(π2) = 1. That is bottom, middle, top in order, with no top or bottom strictly between, so the piece never turns around.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

Rung 1: A hill that fails the horizontal line test, and where to cut it

The figure shows the graph of f(x) = −(x − 1)2 + 3, a hill whose top is the point (1, 3). Does f pass the horizontal line test? If not, give two inputs with the same output to prove it. Then choose which inputs to keep so that f passes the test and still reaches every height it reached before.

(0, 2)(2, 2)(1, 3)−224−6−4−224
The hill y = −(x − 1)2 + 3 with its top marked at (1, 3).
Show the steps and the answer
  1. Say in plain words what is asked: can f be run backward? For that, each output must come from only one input.An inverse function takes each output back to the input it came from. If one output comes from two inputs, there is no single input to go back to, so there is no inverse function.
  2. Picture the graph with inputs across and outputs up. Write f(x)=3−(x−1)2. The square (x−1)2 is never negative and is 0 only at x=1. So f(x) is never above 3 and equals 3 only at x=1. The graph is a hill: it climbs to its top (1, 3), turns, and falls. Far out on either side it drops below any height you name. So the heights f reaches are all y≤3.Inputs the same distance left and right of 1, such as 0 and 2, give the same square. So the two sides of the hill are mirror images. Sine's wave does the same: it climbs to 1 at π2 and then comes back down through the same heights.
  3. Slide a horizontal line from the bottom of the picture to the top. Every height below 3 meets the hill twice, once on the climb and once on the fall. The height 3 meets it once, at the top. Heights above 3 miss it.The horizontal line test fails as soon as a single height is touched at two or more points.
  4. Write the proof as a pair, using the height 2: f(0)=−(0−1)2+3=−1+3=2 and f(2)=−(2−1)2+3=−1+3=2, so f(0)=f(2)=2.Two inputs with one shared output are a complete proof. The line y = 2 crosses the graph at (0, 2) and at (2, 2), so f is not a one-to-one function. On all real numbers it has no inverse function.
  5. Cut the domain the way sine is cut: keep a stretch of inputs with no turn inside it that still reaches every output. The only turn is the top at x=1. So keep the climb up to and including the top: x≤1, the interval (−∞,1].With no turn inside, the graph only rises, so it never comes back to a height it already had. Keeping x = 1 keeps the top height 3. The climb has no bottom, so no height below 3 is lost. The fall, x ≥ 1, works just as well. The climb is chosen to match sine's piece [−π2, π2], which also climbs up to its top.
  6. Check the stretch. Evaluate at its end and at points to its left: f(1)=3,f(0)=2,f(−1)=−(−2)2+3=−1 and f(−2)=−(−3)2+3=−6. Moving right, the outputs −6,−1, 2, 3 only go up. Slide the horizontal line again over this half of the hill: every height y≤3 now touches it exactly once.For x ≤ 1, moving right brings x closer to 1. So (x − 1)2 shrinks and f(x) = 3 − (x − 1)2 grows, and no height repeats. The graph rises from below any height you name up to 3, so every height y ≤ 3 is reached. Both checks pass, so f on (−∞, 1] is a one-to-one function and has an inverse function.
Answer
No. f(0) = f(2) = 2, so the horizontal line y = 2 crosses the graph twice and f is not one-to-one. Keep only x ≤ 1, the interval (−∞, 1]. There f rises all the way to its top f(1) = 3 and takes every height y ≤ 3 exactly once, so it has an inverse function. (The other half, x ≥ 1, the interval [1, ∞), works just as well.)
Double-check Run the cut function backward. From y = 3 − (x − 1)2 we get (x − 1)2 = 3 − y. With x ≤ 1, x − 1 is zero or negative, so x − 1 = −3−y and x = 1 − 3−y. That is one input for each y ≤ 3. Test it: y = 2 gives x = 1 − 1 = 0, and f(0) = 2 (the other input, 2, has been cut away). y = −6 gives x = 1 − 9 = −2, and f(−2) = −6. y = 3 gives x = 1 − 0 = 1, and f(1) = 3. For y above 3, 3 − y is negative and has no square root, which matches the hill never going above 3.

Work to write

  1. f(0) = −(0 − 1)2 + 3 = 2 and f(2) = −(2 − 1)2 + 3 = 2, so f(0) = f(2) = 2
  2. One output comes from two inputs, so the line y = 2 crosses the graph twice: f fails the horizontal line test, is not one-to-one, and has no inverse function on all real numbers
  3. The only turn is the top (1, 3), so keep x ≤ 1, the interval (−∞, 1] (keeping x ≥ 1, the interval [1, ∞), is also correct)
  4. Check: f(−2) = −6, f(−1) = −1, f(0) = 2, f(1) = 3, rising all the way up to the top (for x ≥ 1: f(1) = 3, f(2) = 2, f(3) = −1, f(4) = −6, falling all the way)
  5. On the kept piece each height y ≤ 3 is reached exactly once, so f is one-to-one there and has an inverse function

Rung 2 of 7

Rung 2: one height, three angles

Find every angle θ from 0 to 2π, ends included, with sin θ = 0. What does the answer say about sine and the horizontal line test?

Show the steps and the answer
0π2ππ/2π3π/22π−11
The sine wave meets height 0 at θ = 0, π and 2π: three angles, one height.
  1. Say what it asks: the output is 0; find every input that gives it. This finds every place where the line y=0 touches the sine graph, so you can count them.Solving sin θ = 0 reads the graph backward, from a height to the angles.
  2. On the unit circle, height 0 means the point lies on the horizontal axis: at (1, 0) or at (−1,0).Sine is the y-coordinate, and y = 0 only on the horizontal axis.
  3. (1, 0) is the point for θ=0 and, after a full turn, for θ=2π. (−1,0) is the point for θ=π.0 is the starting point, π is a half turn, and 2π is a full turn back to the start.
  4. Plug each one back in: sin0=0,sinπ=0,sin2π=0.Each of those points has y-coordinate 0.
  5. Three angles share one height, so the line y=0 touches the sine graph three times: sine fails the horizontal line test.Passing allows at most one touch for every horizontal line.
Answer
  • θ = 0, π, 2π
  • Sine fails the horizontal line test.
Double-check Read the graph: the sine wave crosses the horizontal axis at 0, at π and at 2π, the three places where its height is 0.

Rung 3 of 7

Rung 3: half a lap, the top half of the circle

Suppose you keep only the angles in [0, π], the top half of the unit circle. On that piece, does any height repeat? Is every height from −1 to 1 reached?

Show the steps and the answer
π/65π/6rangeπ/2π−11
On [0, π] the line at height 12 still crosses twice, and the shaded heights stop at 0: nothing below the axis.
  1. Say what it asks: on the angles from 0 to π only, check for repeated heights, then for missing heights.A piece can be the domain of an inverse sine that answers every height from −1 to 1 only if no height repeats and none of those heights is missing.
  2. Check one height: sin(π6)=12 and sin(5π6)=12, and both angles lie in [0,π].π6 is positive, and 5π6 is less than 6π6, which is π.
  3. So the line y=12 still touches the piece twice: heights repeat.Two angles in the piece share one height.
  4. Now the heights reached: from 0 to π the point stays on the top half of the circle, rising from (1, 0) to the top, (0, 1), and coming back down to (−1,0). Every height is between 0 and 1, so the piece reaches [0, 1].Every point on the top half has a y-coordinate of 0 or more, and the highest one is the top, at height 1.
  5. A negative height such as −12 is never reached.No point on the top half lies below the horizontal axis.
Answer
  • Heights repeat: sin(π6) = sin(5π6) = 12.
  • Only the heights in [0, 1] are reached.
  • The piece [0, π] does not work for sine.
Double-check On the graph, sine on [0, π] is one hump: up to 1 at π2 and back down to 0, never below the axis. A hump repeats the heights on its two sides and has nothing below 0.

Rung 4 of 7

Rung 4: a quarter lap, nothing repeated, something missing

On the angles in [0, π2], does any height repeat? Is every height from −1 to 1 reached?

Show the steps and the answer
domainrangeπ/2−11
The quarter lap only climbs, but the dashed line at −12 never meets it: negative heights are missing.
  1. Say what it asks: run the same two checks, repeats and missing heights, on the quarter lap from 0 to π2.A usable piece must pass both.
  2. From 0 to π2 the point moves from (1, 0) up to the top, (0, 1), through the first quadrant, rising the whole way.In the first quadrant each counterclockwise step lifts the point.
  3. The height climbs from sin0=0 to sin(π2)=1 and never comes back down, so no height repeats.A height that only climbs cannot return to an earlier value.
  4. But every height on this piece is between 0 and 1. The height −12, for example, is never reached.Points in the first quadrant have a y-coordinate of 0 or more.
  5. So a backward machine built on this piece would have no angle to hand back for −12: the piece has no repeats but is too short.An inverse sine that answers every height from −1 to 1 needs an angle for each of them.
Answer
  • No height repeats.
  • Only the heights in [0, 1] are reached, so every negative height is missing.
  • Sine on [0, π2] can be run backward, but only for heights from 0 to 1, so it cannot be the piece for an inverse sine that answers every height from −1 to 1.
Double-check On the graph, the quarter lap from (0, 0) to (π2, 1) stays on or above the horizontal axis, so the dashed line at height −12 never meets it.

Rung 5 of 7

Rung 5: the right climb with its ends left out

On the angles in (−π2, π2), with round brackets, is every height from −1 to 1 reached?

Show the steps and the answer
−1.570801.5708−π/2π/2
Open dots at −π2 and π2: the ends are left out, and with them the heights −1 and 1.
  1. Say what it asks: the round brackets leave out both ends. Does leaving them out lose any height?A round bracket means that end is not in the piece.
  2. Height 1 belongs only to the top of the circle, (0, 1), which is the point for θ=π2.The top is the only point on the unit circle with y-coordinate 1.
  3. π2 is an end, and the round bracket leaves it out. Any other angle at the top is a full turn away, such as π2−2π=π2−4π2=−3π2, which is below −π2 and so outside the piece.Taking away a full turn, 2π, lands on the same point; to subtract, write 2π as 4π2.
  4. In the same way, height −1 belongs only to the bottom, (0,−1), the point for θ=−π2, and that end is left out too.The bottom is the only point with y-coordinate −1, and every other angle that lands there is a full turn away from −π2, outside the piece.
  5. So the heights reached are all the numbers strictly between −1 and 1, that is (−1,1). The heights −1 and 1 are missing.The climb never arrives at its own ends.
  6. Fix it by closing the brackets: [−π2,π2].Square brackets keep the ends, and with them the heights −1 and 1.
Answer
  • No: the heights reached are (−1, 1), so −1 and 1 are missing.
  • Closing the brackets, [−π2, π2], fixes it.
Double-check Evaluate sine at the two dropped ends: sin(−π2) = −1 and sin(π2) = 1. Those are exactly the two missing heights.

Rung 6 of 7

Rung 6: the agreed piece passes both checks

Show that on [−π2, π2] sine repeats no height and reaches every height from −1 to 1.

Show the steps and the answer
(−π/2, −1)(0, 0)(π/2, 1)domainrange−π/2π/2−11
The kept arc climbs from (−π2, −1) to (π2, 1), and its shadow on the vertical axis is all of [−1, 1].
  1. Say what it asks: run the same two checks on the closed piece from −π2 to π2.This is the piece that will be used, so it must pass both.
  2. Evaluate the ends and the middle: sin(−π2)=−1,sin0=0,sin(π2)=1.The points are the bottom, (0, −1), the right end, (1, 0), and the top, (0, 1).
  3. Between them the point climbs the right half of the circle, through the fourth quadrant and then the first, rising the whole time.On the right half each counterclockwise step lifts the point.
  4. No repeats: the height only climbs.A climbing height never returns to an earlier value.
  5. Nothing missing: the height moves smoothly from −1 to 1, and the square brackets keep both ends, so every height in [−1,1] is reached, each exactly once.A smooth climb from −1 to 1 passes through every value in between, and the two ends supply −1 and 1.
Answer
  • No height repeats, and every height in [−1, 1] is reached exactly once.
  • This is the restricted domain for sine: [−π2, π2].
Double-check On the graph, the arc from (−π2, −1) to (π2, 1) rises the whole way with no top or bottom inside it, and its shadow on the vertical axis covers all of [−1, 1].

Rung 7 of 7

Rung 7: another piece that works, and why it is not the one used

Check the angles from π2 to 3π2, ends included: the left half of the circle. Do they pass both checks? Then explain why [−π2, π2] is the piece everyone uses instead.

Show the steps and the answer
π/23π/2domainrangeπ3π/2−11
From π2 to 3π2 the wave runs downhill from 1 to −1, so this piece passes too; it is not the one chosen.
  1. Say what it asks: run the two checks on a second piece, then explain a choice between two pieces that both pass.More than one piece can work, so the question is why one of them is chosen.
  2. Ends and middle: sin(π2)=1 at the top, sinπ=0 at the left end, (−1,0), and sin(3π2)=−1 at the bottom, (0,−1).Sine is the y-coordinate of each of those points.
  3. Between them the point moves down the left half of the circle, from the top to the bottom, and its height falls the whole time.On the left half each counterclockwise step lowers the point.
  4. So no height repeats, and every height from 1 down to −1 is reached once: this piece passes both checks.A height that only falls cannot repeat, and a smooth fall from 1 to −1 passes every value between, with both ends kept.
  5. Compare the two pieces. [−π2,π2] contains 0 and the first-quadrant special angles π6,π4 and π3. The left piece contains none of them, not even 0.Every angle in the left piece is at least π2, and 0, π6, π4 and π3 are all smaller than π2.
  6. For those reasons mathematicians agreed on [−π2,π2]. The choice is a convention, and what matters most is that everyone uses the same piece.If two people used different pieces, running sine backward would give them different angles for the same height, and both would think they were right.
Answer
  • Yes: from π2 to 3π2 sine falls from 1 to −1 with no repeats, so this piece would work.
  • The agreed piece is [−π2, π2], because it contains 0 and the small positive special angles, and one agreed piece means one answer for everyone.
Double-check On the graph, sine from π2 to 3π2 runs downhill the whole way, from 1 at the top to −1 at the bottom, with no turn inside, so each horizontal line between −1 and 1 crosses it once.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Using a vertical line: every vertical line crosses the sine wave once, so sine must have an inverse function.
The vertical line test only shows that sine is a function, one height for each angle. Running sine backward starts from a height, and all the angles with that height lie on one horizontal line.
✓ Instead: Slide a horizontal line instead. The line y = 12 crosses the wave at π6 and at 5π6, so sine fails the horizontal line test.
✗ Not this: Keeping one full lap, [0, 2π], and expecting the repeats to be gone.
One lap still rises and falls: sin(π6) = sin(5π6) = 12, and sin 0 = sin π = sin 2π = 0, all inside [0, 2π].
✓ Instead: Keep only the climb from the bottom to the top, [−π2, π2], where no height repeats.
✗ Not this: Keeping [0, π2] because nothing repeats there.
No repeats is only half the job. Every angle from 0 to π2 has a height of 0 or more, so a negative height such as −12 would have no angle to go back to.
✓ Instead: The piece must also reach every height from −1 to 1. [−π2, π2] does: it runs from sin(−π2) = −1 up to sin(π2) = 1.
✗ Not this: Writing the restricted domain with round brackets, (−π2, π2).
Round brackets drop the ends, and the ends are the only angles in the piece with heights −1 and 1.
✓ Instead: Use square brackets: [−π2, π2].
✗ Not this: Thinking the cut changes sine, so that sin(5π6) is no longer 12.
The cut does not change a single value of sine: sin(5π6) is still 12. It only decides which angles a backward machine is allowed to hand back.
✓ Instead: Sine still works on every angle. The restricted domain [−π2, π2] matters only when sine is run backward.
✗ Not this: Believing every function must be cut before it can have an inverse function.
Only a function that fails the horizontal line test needs a cut. y = x3 only climbs: (−2)3 = −8, 13 = 1, 23 = 8, and no two inputs ever share an output.
✓ Instead: Run the horizontal line test first, and cut only when it fails, as it does for sine.

Tips and tricks

  • Memory device: a vertical line asks whether it is a function (each x has one y); a horizontal line asks whether it can run backward (each y has one x).
  • Memory cue for the piece: sine climbs the right side. Picture the right half of the unit circle, from the bottom at −π2 to the top at π2.
  • Check any piece in ten seconds: find sine at its two ends and its middle. For [−π2, π2] you get −1, 0, 1, climbing in order with no top or bottom in between.
  • To show on paper that a function fails the horizontal line test, write one pair of inputs with the same output, such as sin(π6) = sin(5π6) = 12. One pair is a complete proof.
  • Rebuild, do not memorize: draw the unit circle, trace the right half from the bottom to the top, and you have the piece [−π2, π2] and the heights [−1, 1].
  • Cosine and tangent repeat too, so each needs its own cut, chosen by the same two checks: no repeats, nothing missing.

7 The trap

Cutting sine to [0, π], the top half of the circle, because it looks like a natural half. On [0, π] sine climbs and then falls, so sin(π6) = sin(5π6) = 12 still repeats, and it never reaches a negative height. Sine's piece is the right half of the circle, from the bottom to the top: [−π2, π2]. Say it to yourself: sine climbs the right side.

Flash cards

Say the answer out loud, then flip.

Why must a trig function have its domain cut before it can have an inverse function?
Every trig function repeats. Sine, for example, gives 12 at π6 and again each time you add 2π to that angle. Run backward, 12 would point to infinitely many angles instead of one, so we keep a piece where no output repeats.
What does the horizontal line test tell you about a function?
  • Whether it has an inverse function.
  • Pass: no horizontal line crosses the graph more than once, so it is a one-to-one function and has an inverse.
  • Fail: some line crosses two or more times, so two inputs share an output and, on that domain, there is no inverse.
What restricted domain does sine get, and why does that stretch work?
  • [−π2,π2]
  • Like a Ferris wheel seat climbing from the bottom to the top, sine rises there without turning back, from sin(−π2) = −1 to sin(π2) = 1, so each height from −1 to 1 happens exactly once.
Why is [0, π] the wrong piece of sine to keep?
  • On [0, π] sine climbs and then falls, so heights repeat: π6 and 5π6 both give 12.
  • It also never goes below 0, so negative outputs such as −1 are never reached.

Lesson 2 of 8

The inverse sine

Subject: MathematicsLeans on: Sine is a heightLeans on: The five special sinesLeans on: Negative angles turn clockwiseLeans on: Coterminal anglesLeans on: Radians to degreesLeans on: Square brackets include the endLeans on: Sizing up a rootLeans on: RationalizingLeans on: Adding fractions of πOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Sine takes an angle and gives back a height. Picture a Ferris wheel with radius 1. Your seat starts level with the hub, on the right. Turn the wheel through an angle, and sine tells you your height: above the hub is positive, below is negative. The inverse sine asks the reverse question: your seat is at height 12, so how far did the wheel turn? The catch: every lap passes that height twice, once rising and once falling. So everyone agrees to use only the right side, from straight down to straight up, counting a downward turn as negative. There, each height from −1 to 1 shows up exactly once. That one angle is the answer, called the principal value.

2 Picture it

x = cos θy = sin θπ/6
arcsin(12) = π6: on the right half of the circle, the point at height 12 sits at the angle π6.

Reminder

Reminder: Sine is a height, The five special sines, Negative angles turn clockwise, Coterminal angles, Radians to degrees, Square brackets include the end, Sizing up a root, Rationalizing, Adding fractions of π
  • Sine is a height. On the unit circle, sin θ is the y-coordinate, the height, of the point at angle θ. Example: the point at π2 is (0, 1), so sin π2 = 1.
  • The five special sines. sin 0 = 0, sin π6 = 12, sin π4 = 22, sin π3 = 32, sin π2 = 1. Memory device: the tops count 0, 1, 2, 3, 4, always over 2.
  • Negative angles turn clockwise. −π6 is a 30° turn clockwise from the positive x-axis. It lands at the mirror image of the π6 point across the x-axis: same distance across, opposite height, so sin(−π6) = −12.
  • Coterminal angles. Angles that differ by a full turn, 360° or 2π, end at the same point and have the same sine. Example: −60° + 360° = 300°, so −π3 and 5π3 name one point.
  • Radians to degrees. π = 180°, so divide 180° by the bottom: π6 = 30°, π4 = 45°, π3 = 60°, π2 = 90°.
  • Square brackets include the end. [−1, 1] means every number from −1 to 1, both ends included. Example: 1 is in it, 1.5 is not.
  • Sizing up a root. 2 ≈ 1.414 and 3 ≈ 1.732, so 22 ≈ 0.707 and 32 ≈ 0.866: both between 0 and 1.
  • Rationalizing. 12 = 12 · 22 = 22. Multiplying by 22, which is 1, changes the look, not the value.
  • Adding fractions of π. Give both the same bottom first: −π3 + π6 = −2π6 + π6 = −π6.

3 Why

An inverse must give one answer, and sine repeats, so we use sine only on its restricted domain [−π2, π2]. There sine climbs from −1 to 1 and passes the horizontal line test: each height comes from exactly one angle, so the reverse is a function. This piece is a convention, chosen because it holds the first-quadrant angles and is centered at 0, so the answer for −12 is the answer for 12 with a minus sign. If everyone picked a different piece, answers would disagree. The domain is [−1, 1] because no point on the unit circle sits above 1 or below −1.

4 The rule

y= arcsin x, also written y=sin−1 x, means siny=x and −π2≤y≤π2.

Domain: [−1,1]. Range: [−π2,π2], which is −90° to 90°.

The same idea, five ways

Say it

Say “y is the inverse sine of x” or “y is the arcsine of x” (ARK-sine). Read sin−1 x aloud as “inverse sine of x”, not “sine to the minus one”.

Write it

y is the angle from −π2 to π2, ends included, whose sine is x.

In math
  • y = arcsin x
  • y = sin−1 x, the same thing; the −1 is a label, not a power
  • sin y = x and −π2 ≤ y ≤ π2
  • domain: −1 ≤ x ≤ 1, that is [−1, 1], that is {x | −1 ≤ x ≤ 1}
  • range: −π2 ≤ y ≤ π2, that is [−π2, π2], or −90° ≤ y ≤ 90° in degrees
  • graph: the piece of y = sin x from (−π2, −1) to (π2, 1), mirrored across the line y = x; it rises from (−1, −π2) through (0, 0) to (1, π2)
Like

A Ferris wheel of radius 1: from your seat's height, say how far the wheel turned, counting only the right side, from straight down to straight up.

See it
1/2arcsin: which anglefrom −π/2 to π/2 hasthis sine?inputoutputπ/6
A height goes in and an angle comes out: the sine machine run backward.

The same idea, other ways

As a picture

Draw the unit circle and cover its left half. What remains runs from the bottom, at −π2, through the right end, at 0, up to the top, at π2. Climbing this half, the height rises from −1 to 1 and passes each value once. To find arcsin x, slide along the half to the point at height x and read its angle: positive above the x-axis, negative below.

x = cos θy = sin θ−π/6
On the right half, the height −12 belongs to −π6, a 30° turn clockwise.
As a story

The hour hand of a clock points at 3 at three in the morning, at three in the afternoon, and again every day after. Told only that the hand points at 3, you cannot know which time it was, so people agree on a rule: give this morning's time. The inverse sine works the same way. Many angles have sine 12: π6, 5π6, 13π6 and more. The rule “give the angle from −π2 to π2” picks π6. That chosen answer is the principal value.

30°390°same terminal side
30° and 390° end at the same point, so they share the sine 12; the inverse sine names only 30°, which is π6.
With small numbers

Read sine facts backward, keeping only angles from −π2 to π2. In the table, the top row holds heights and the bottom row holds angles. The highlighted column under 12 says arcsin(12) = π6, because sin π6 = 12. The column under −12 holds −π6: same size, opposite sign. The two end columns are the bottom and the top of the circle.

input xoutput arcsin x−1−π/2−1/2−π/6001/2π/61π/2↓ evaluate: input given, read the output below it
Each column pairs a height with the one angle in the range that has it.
As a rule of thumb

Input between 0 and 1: the angle is in the first quadrant. Input between −1 and 0: the angle is in the fourth quadrant, written as a negative angle such as −π6, never as 11π6. Zero in, zero out; 1 in, π2 out, straight up; −1 in, −π2 out, straight down. The answer is never in the second or third quadrant, because those make up the left half of the circle. An input above 1 or below −1 has no answer at all.

QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
Sine is positive in quadrants I and II and negative in III and IV.
Why it must be true

A machine can be run backward only if each output came from exactly one input; otherwise, handed an output, you could not say which input made it. Sine on all angles fails this: π6 and 5π6 both give 12. On the restricted domain from −π2 to π2, sine is a one-to-one function: its heights only go up, so no height repeats. Turn every arrow around and you get a function, the inverse sine. Its inputs are the old outputs, heights from −1 to 1, and its outputs are the old inputs, angles from −π2 to π2.

−π/2−π/60π/6π/2−1−1/201/21function
On the restricted domain each angle sends its arrow to a different height.
x, a heightarcsin xin degreesthe turn from the right end
−1−π2−90°a quarter turn clockwise
−32−π3−60°60° clockwise
−22−π4−45°45° clockwise
−12−π6−30°30° clockwise
000°no turn
12π630°30° counterclockwise
22π445°45° counterclockwise
32π360°60° counterclockwise
1π290°a quarter turn counterclockwise

5 How

  1. Turn the question into a sine question: y = arcsin x asks for the angle y from −π2 to π2 with sin y = x. The input x is a height; the answer y is an angle.
  2. Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.
  3. Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.
  4. Check the answer: it lies between −π2 and π2, and its sine gives back x.

Exact values of arcsin x

1
Is x between −1 and 1, ends included?
YesGo on.
NoStop: arcsin x is undefined, because no point on the unit circle is that high or that low.
↓
2
Ignoring its sign, is x a special height: 0, 12, 22, 32 or 1, perhaps in disguise, such as 0.5 or 12?
YesName the angle from 0 to π2 with that sine, and go on.
NoThe angle exists but is not a special angle. Leave the exact answer as arcsin x.
↓
3
Is x negative?
YesAnswer with the negative of that angle: a clockwise turn into the lower right quarter.
NoAnswer with the angle itself: it is in the upper right quarter, or it is 0.
  1. Check that −1 ≤ x ≤ 1. If not, write undefined and stop.
  2. Drop the sign of x for now. If the positive version looks unfamiliar, rewrite it: 0.5 = 12, 12 = 22.
  3. Name the angle from 0 to π2 with that sine: sin 0 = 0, sin π6 = 12, sin π4 = 22, sin π3 = 32, sin π2 = 1.
  4. Put the sign back. If x is positive or 0, the angle from the last step is the answer. If x is negative, the answer is that angle with a minus sign: the same turn made clockwise, which lands below the x-axis where heights are negative.
  5. Check: the answer lies between −π2 and π2, and its sine equals x.

6 Worked example

Worked example

An exact value with a negative input

Evaluate arcsin(−32) exactly.

Show the steps and the answer
x = cos θy = sin θ−π/3
At −π3, a 60° turn clockwise, the point is (12, −32): its height is the input.
-60°300°same terminal side
−60° and 300° end at the same point, but only −60°, which is −π3, lies in the range of arcsin.
  1. Say what it asks: the input −32 is a height. Find the one angle from −π2 to π2 whose sine is −32.That is the definition of arcsin: the angle on the right half of the unit circle at the given height.
  2. Check the input: 3≈1.732, so −32≈−0.866, which is between −1 and 1.Heights on the unit circle run from −1 to 1, so this check tells you an answer exists.
  3. Drop the minus sign for a moment. The angle from 0 to π2 with sine 32 is π3, which is 60°.The point at π3 is (12, 32), so its height is 32.
  4. Put the sign back. The height is negative, so the point is below the x-axis on the right half: make the same turn clockwise, −π3.The point at −π3 is the mirror image of the point at π3 across the x-axis: same distance across, opposite height.
  5. Confirm the range: −90°<−60°<90°, so −π3 is between −π2 and π2.arcsin answers only with angles in that stretch, and on a number line −90 sits to the left of −60.
  6. Set aside 4π3 (240°) and 5π3 (300°). Both have sine −32, but both are bigger than π2.4π3 is on the left half; 5π3 is the same point as −π3, reached the long way around, so it is outside the range.
Answer
arcsin(−32) = −π3, which is −60°
Double-check Take the sine of the answer: the point at −π3 is (12, −32), so sin(−π3) = −32, the input. Second way, with the 30-60-90 triangle of hypotenuse 1: the side across from the 60° angle is 32, and at −60° the triangle hangs below the x-axis, so the height is −32.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

Rung 1: the top of the circle

Evaluate arcsin(1).

Show the steps and the answer
x = cos θy = sin θπ/2
The only point at height 1 is the top of the circle, at π2.
  1. Say what it asks: the input 1 is a height. Find the angle from −π2 to π2 whose sine is 1.arcsin x always means the angle in that stretch whose sine is x.
  2. Check the input: 1 is in [−1,1].The square bracket at 1 means the end itself is allowed.
  3. Find the point at height 1: the top of the circle, (0, 1), a quarter turn counterclockwise, at the angle π2.A circle of radius 1 reaches 1 unit above its center only at the very top.
  4. Confirm the angle is in the range: π2 is the top end of [−π2,π2], and that end is included.The range is written with square brackets too.
Answer
arcsin(1) = π2, which is 90°
Double-check sin π2 is the height of the point (0, 1), which is 1: the input comes back.

Rung 2 of 7

Rung 2: a special height above the axis

Evaluate arcsin(12).

Show the steps and the answer
30°60°√31245°45°11√2
In the 30-60-90 triangle the side across from 30° is half the hypotenuse, which is why sin 30° = 12.
  1. Say what it asks: find the angle from −π2 to π2 whose sine is 12.The input 12 is a height, and arcsin returns the angle on the right half at that height.
  2. Check the input: 12=0.5, which is between −1 and 1.Heights on the unit circle never go above 1 or below −1, so an answer exists.
  3. The input is positive, so look in the upper right quarter. The point at π6 (30°) is (32,12), so its height is 12.In the 30-60-90 triangle with hypotenuse 1, the side across from the 30° angle is 12.
  4. Set aside 5π6 (150°). Its sine is also 12, but it is bigger than π2.5π6 is on the left half of the circle, outside the range, and arcsin gives only the one answer in its range.
Answer
arcsin(12) = π6, which is 30°
Double-check sin π6 = 12, the input, and 30° is between −90° and 90°.

Rung 3 of 7

Rung 3: the answer in degrees

Evaluate arcsin(22) and give the answer in degrees.

Show the steps and the answer
x = cos θy = sin θ45°
At 45° the height and the distance across are equal, both 22.
  1. Say what it asks: find the angle from −90° to 90° whose sine is 22, written in degrees.The range from −π2 to π2 is the same stretch as −90° to 90°, since π = 180°.
  2. Check the input: 2≈1.414, so 22≈0.707, which is between −1 and 1.An answer exists only for heights from −1 to 1.
  3. The input is positive, so look in the upper right quarter. The point at 45° is (22,22), so its height is 22.In the 45-45-90 triangle with hypotenuse 1, each leg is 22.
  4. Write the angle in degrees: 45°.The question asks for degrees; in radians the same angle is π4, since 180° ÷ 4 = 45°.
Answer
arcsin(22) = 45°, which is π4 in radians
Double-check sin 45° = 22, the input, and 45° is between −90° and 90°.

Rung 4 of 7

Rung 4: the first negative input

Evaluate arcsin(−12).

Show the steps and the answer
−π/6terminal sideinitial side
A negative angle is a clockwise turn: −π6 dips 30° below the positive x-axis.
  1. Say what it asks: find the angle from −π2 to π2 whose sine is −12.That is what arcsin means.
  2. Check the input: −12=−0.5, which is between −1 and 1.So an answer exists.
  3. Drop the sign for a moment: the angle from 0 to π2 with sine 12 is π6.The point at π6 is (32, 12).
  4. Put the sign back: the height is negative, so the point is below the x-axis on the right half. Make the same turn clockwise: −π6.The point at −π6 is the mirror image of the point at π6 across the x-axis, so its height is −12.
  5. Set aside 7π6 and 11π6. Both have sine −12, but both are bigger than π2.7π6 is on the left half; 11π6 is the same point as −π6, reached the long way around, and the range allows only the short clockwise name.
Answer
arcsin(−12) = −π6, which is −30°
Double-check The point at −π6 is (32, −12), so sin(−π6) = −12, the input; and −30° is between −90° and 90°.

Rung 5 of 7

Rung 5: the inverse notation and a root in the bottom

Evaluate sin−1(−12).

Show the steps and the answer
x = cos θy = sin θ−π/4
At −π4 the point sits as far below the axis as it sits to the right: height −22.
  1. Read the notation: sin−1 is the inverse sine, arcsin. The question is: which angle from −π2 to π2 has sine −12?The −1 on sin is the inverse label, not a power, so this is not one over sine.
  2. Rewrite the input: 12=12·22=22, so the input is −22.Multiplying by 22, which equals 1, changes the look, not the value, and 2 · 2 = 2. Now the input matches a special height.
  3. Check the input: −22≈−0.707, which is between −1 and 1.So an answer exists.
  4. Drop the sign: the angle from 0 to π2 with sine 22 is π4.The point at π4 is (22, 22).
  5. Put the sign back: −π4.A negative height puts the point below the x-axis on the right half: the same turn, made clockwise.
Answer
sin−1(−12) = −π4, which is −45°
Double-check The point at −π4 is (22, −22), so sin(−π4) = −22, which equals −12, the input; and −45° is in the range.

Rung 6 of 7

Rung 6: a look-alike input that is not allowed

Evaluate arcsin(32).

Show the steps and the answer
−1013/2√3/2
The domain of arcsin stops at 1: 32 ≈ 0.866 is inside it and 32 = 1.5 is outside.
  1. Say what it asks: find the angle from −π2 to π2 whose sine is 32.That is what arcsin means.
  2. Check the input: 32=1.5, and 1.5 > 1.The domain is [−1, 1], so 1.5 is outside it.
  3. Stop and write undefined.No point on the unit circle has height 1.5; the highest point is at height 1, so no angle has sine 32.
  4. Do not confuse it with 32≈0.866, whose arcsin is π3.The root sign makes the top about 1.732 instead of 3, which keeps the number below 1.
Answer
arcsin(32) is undefined.
Double-check The largest sine any angle has is sin π2 = 1, and 1 < 1.5, so no angle can give back the input.

Rung 7 of 7

Rung 7: two values in one expression

Evaluate arcsin(−32) + arcsin(12) exactly.

Show the steps and the answer
  1. Say what it asks: find each inverse sine on its own, then add the two angles.Each arcsin is a number, an angle. Add the angles, not the inputs: −32 + 12 ≈ −0.366 is a height between −12 and 0, so its angle lies between −30° and 0°, a different number.
  2. First value: arcsin(−32)=−π3.sin π3 = 32, and a negative input gives the same turn made clockwise.
  3. Second value: arcsin(12)=π6.sin π6 = 12, and π6 is in the range.
  4. Add: −π3+π6=−2π6+π6=−π6.Fractions add once they share a bottom: π3 = 2π6, and −2 sixths of π plus 1 sixth of π is −1 sixth of π.
Answer
arcsin(−32) + arcsin(12) = −π6
Double-check In degrees: −60° + 30° = −30°, and −30° is −π6. Same answer.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Reading sin−1 x as 1sinx, one over sine.
Here the −1 is the label for an inverse function, the same label as in f−1. It is not a power. Watch the difference: sin2 x does mean (sin x)2, but sin−1 x does not mean (sin x)−1.
✓ Instead: sin−1 x is arcsin x, an angle: sin−1(12) = π6. One over sine is written 1sinx, (sin x)−1 or csc x.
✗ Not this: arcsin(π6) = 12.
This runs the machine the wrong way. arcsin takes a height and gives back an angle; sine is the one that takes the angle π6 and gives the height 12.
✓ Instead: sin π6 = 12, so arcsin(12) = π6: one fact read in two directions.
✗ Not this: arcsin(−1) = 3π2.
sin 3π2 = −1 is true: 3π2 names the bottom of the circle. But 3π2 is bigger than π2, so it is outside the range.
✓ Instead: arcsin(−1) = −π2: the same bottom point, reached by a quarter turn clockwise.
✗ Not this: arcsin(0) = π.
sin π = 0 is true, but π points to the left end of the circle, outside the right half.
✓ Instead: arcsin(0) = 0: the right end of the circle, at height 0, with no turn at all.
✗ Not this: Writing an angle for arcsin(2), such as one near 90°.
No point on the unit circle has height 2; the highest point has height 1. The input is outside the domain [−1, 1].
✓ Instead: arcsin(2) is undefined. Write the word undefined, not an angle.

Tips and tricks

  • Memory device: sine climbs the right side. Every arcsin answer sits on the right half of the unit circle, from −90° at the bottom to 90° at the top.
  • Check every answer twice: the sine of your angle must give back the input, and the angle must lie between −π2 and π2. If either check fails, the answer is wrong.
  • Sign shortcut: a positive input gives a positive angle; a negative input gives the negative of the same angle. arcsin(−22) = −arcsin(22) = −π4.
  • Do not memorize the table of nine values. Rebuild it in ten seconds from the five special sines and the sign shortcut.
  • Write exact answers such as −π3, not decimals such as −1.047, and use radians unless the problem uses degrees.
  • Say sin−1 x out loud as “inverse sine of x” or “arcsine of x”, never “sine to the minus one”. Saying it right keeps you from reading it as one over sine.

7 The trap

Answering with an angle outside the range. For arcsin(−12) it is tempting to write 7π6 or 11π6: both have sine −12, but neither lies between −π2 and π2. The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −π6. Before you write any arcsin answer, check that it lies in that stretch.

Flash cards

Say the answer out loud, then flip.

In y = arcsin x, which letter is the height and which is the angle?
  • x, the input, is the height: how far your Ferris wheel seat sits above or below the hub.
  • y, the answer, is the angle: how far the wheel turned to put your seat there, always from −π2 to π2.
  • In symbols: sin y = x.
Why is arcsin 2 undefined?
It asks for an angle whose sine is 2, and there is none. On a Ferris wheel of radius 1, your seat is never more than 1 above or below the hub, so a sine is never above 1 or below −1. That is why the domain of arcsin is [−1, 1].
Why does the inverse sine answer only with angles from −π2 to π2?
Sine repeats: each lap of the Ferris wheel passes most heights twice, so many angles have the same sine. On the right side of the wheel, from straight down to straight up, each height from −1 to 1 shows up exactly once, so there is one answer, the principal value. This stretch is a convention everyone shares, so all answers agree.
What is arcsin(−32)?
  • −π3, which is −60°. A negative height puts your seat below the hub, so the wheel turned down: a negative angle.
  • Check: sin(−π3) = −32, and −π3 lies between −π2 and π2.
  • Not 4π3 or 5π3: they have the same sine but lie outside that stretch.

Lesson 3 of 8

The inverse cosine

Subject: MathematicsLeans on: Cosine is the x-coordinateLeans on: Signs by quadrantLeans on: Mirror across the vertical axisLeans on: Degrees to radiansLeans on: Square brackets include the endLeans on: The horizontal line testLeans on: The inverse sine's rangeLeans on: Rough sizes of √{2}, √{3} and πLeans on: Subtracting a negativeLeans on: Fractions over a common bottomOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Picture a protractor, the half-circle ruler for measuring angles, with its straight edge at the bottom. Number that edge −1 at the left end, 0 in the middle and 1 at the right end. Pick a spot on the edge, look straight up to the curved rim and read the angle there. Each spot lines up with exactly one angle, from 0° at the right end to 180° at the left. That is the inverse cosine. Cosine takes an angle and tells you how far left or right its point on the unit circle sits. The inverse cosine runs backward: give it the left-right position, and it hands back the one angle on the top half of the circle with that position.

2 Picture it

[0, π]
Every answer of the inverse cosine lies on this half-turn over the top.

Reminder

Reminder: Cosine is the x-coordinate, Signs by quadrant, Mirror across the vertical axis, Degrees to radians, Square brackets include the end, The horizontal line test, The inverse sine's range, Rough sizes of 2, 3 and π, Subtracting a negative, Fractions over a common bottom
  • Cosine is the x-coordinate. The point at angle θ on the unit circle is (cos θ, sin θ): the 60° point is (12, 32), so cos 60° = 12 and sin 60° = 32.
  • Signs by quadrant. Left of the vertical axis every x-coordinate is negative, so cosine is negative in quadrant II: cos 150° = −32.
  • Mirror across the vertical axis. Reflecting a point across the vertical axis keeps its height, flips the sign of its x-coordinate, and turns the angle θ into 180° − θ: the 60° point (12, 32) becomes the 120° point (−12, 32).
  • Degrees to radians. Multiply by π180° and reduce: 120° × π180° = 120π180 = 2π3.
  • Square brackets include the end. [0, π] contains 0 and π themselves, so arccos 1 = 0 and arccos(−1) = π are allowed answers.
  • The horizontal line test. A function can be run backward only if no horizontal line crosses its graph twice: y = x2 fails, since the line y = 4 crosses it at x = −2 and at x = 2.
  • The inverse sine's range. arcsin x answers from −π2 to π2, the right half of the circle, so a negative input gives a negative angle: arcsin(−22) = −π4.
  • Rough sizes of 2, 3 and π. 2 ≈ 1.41, 3 ≈ 1.73 and π ≈ 3.14, all rounded, so 22 ≈ 0.71, 32 ≈ 0.87 and π2 ≈ 1.57.
  • Subtracting a negative. Subtracting a negative is adding the positive: 5 − (−2) = 5 + 2 = 7, and 3π4 − (−π4) = 3π4 + π4.
  • Fractions over a common bottom. With matching bottoms, add the tops: 3π4 + π4 = 4π4 = π. If the bottoms differ, multiply top and bottom to match first: 2π3 = 4π6.

3 Why

Why not reuse the inverse sine's right half, from −π2 to π2? There the left-right position is never negative, so arccos(−12) would have no answer, and positions repeat: −π3 and π3 both sit at 12. Over the top half, from 0 to π, the position slides from 1 down to −1 without turning back, so each number from −1 to 1 appears exactly once, passing the horizontal line test. The bottom half would work too. The top is the convention because it starts at 0 and puts inputs between 0 and 1 in the first quadrant, as right triangles do; calculators follow it, so another half would disagree with them.

4 The rule

The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0,π].

So y= arccos x, also written y=cos−1 x, means cosy=x and 0≤y≤π.
Domain of arccos: [−1,1]. Range of arccos: [0,π].

The same idea, five ways

Say it

Say arc cosine of x, inverse cosine of x, or cosine inverse of x. All three mean the angle whose cosine is x.

Write it

y is the inverse cosine of x when y is the angle from 0 to π, both ends included, whose cosine is x.

In math
  • y = arccos x
  • y=cos−1x
  • cos y = x and 0 ≤ y ≤ π
  • Domain: −1 ≤ x ≤ 1, written [−1, 1] or {x | −1 ≤ x ≤ 1}
  • Range: 0 ≤ y ≤ π, written [0, π] or {y | 0 ≤ y ≤ π}
Like

A protractor: pick a spot on its straight edge, look straight up, and read the one angle on the curved rim above that spot.

See it
x = cos θy = sin θπ/4
The input is the left-right leg, here 22.

The same idea, other ways

As a picture

Draw the unit circle and keep only its top half. Find the input on the horizontal axis, go straight up until you meet the circle, and the angle to that point is the answer. For the input 12 you meet the point at 60°, so arccos 12 = π3. For any input strictly between −1 and 1, going up you meet the circle once and going down you would meet a second point, which is why the bottom half is left out. At 1 and −1 the two halves touch, so there is only the one point.

x = cos θy = sin θπ/3
Straight up from x = 12 you meet the top half once, at 60°, so arccos 12 = π3.
As a story

Think of a fuel gauge whose needle swings over the top of its dial, from pointing straight right to pointing straight left, and never dips below its pivot. If someone tells you only how far left or right the tip of the needle is, you can still name the exact reading, because the needle passes over each left-right spot once. A clock hand does not work this way: it goes all the way around, and the hand pointing at 2 sits exactly as far right as the hand pointing at 4.

With small numbers

Walk along the top half and watch the cosine. In the table picture, the output row falls steadily from 1 down to −1 and never repeats a number, so cosine on the top half is a one-to-one function. That means you can read the table backward, from an output up to its input, and always get one answer: the highlighted −12 points up to 2π3.

input θoutput cos θ01π/31/2π/202π/3−1/2π−1↑ solve: output given, read every input above it
Along the top half the cosine only falls, so each output points back to exactly one angle.
Why the inverse sine's half fails here

Try the inverse sine's half, the right side from −π2 up to π2. Every point there sits on or to the right of the vertical axis, so every cosine there is 0 or more: no angle on that half has cosine −12. Also, the points at −π3 and π3 sit at the same left-right position, 12, so cosine on that half reaches 12 twice and cannot be run backward. The top half fixes both problems at once.

−90° to 90°
The inverse sine's half-turn runs up the right side, where x is never negative.
As a rule of thumb

Between 0 and 1 in, first quadrant out; 1 in, 0 out. Zero in, π2 out. Between −1 and 0 in, second quadrant out; −1 in, π out. The answer is never negative and never more than π, which is about 3.14, and an input above 1 or below −1 has no answer.

QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
Inverse cosine answers live on the top half, from 0 to π.
input xarccos xthe same angle in degreesarcsin x, for contrast
100°π2
32π630°π3
22π445°π4
12π360°π6
0π290°0
−122π3120°−π6
−223π4135°−π4
−325π6150°−π3
−1π180°−π2

5 How

  1. Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
  2. Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
  3. Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to π2. An input of 0 puts it straight up, at π2. A negative input puts it on the top-left quarter, so the answer is past π2, up to π.
  4. In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
  5. Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.

Finding arccos x exactly

1
Is the input from −1 to 1, ends included?
YesGo on.
NoStop: arccos x is undefined, because no point on the unit circle has that x-coordinate.
↓
2
Is the input 0?
YesThe answer is π2, the top of the circle.
NoGo on.
↓
3
Is the input positive?
YesLook on the top-right quarter: the answer is from 0 up to π2.
NoThe input is negative, so look on the top-left quarter. The answer is past π2, up to π, and never negative.
↓
4
Does the cosine of your answer equal the input, and is the answer from 0 to π?
YesDone: write the exact value in radians unless degrees are asked for.
NoGo back: you picked the wrong point or the wrong half.
  1. Domain check: the input must be from −1 to 1. If it is not, write undefined and stop.
  2. Sign check: a positive input lands on the top-right quarter, 0 lands straight up at π2, a negative input lands on the top-left quarter.
  3. Name the special angle in that quarter whose point has the input as its x-coordinate, mirroring the positive twin when the input is negative.
  4. Test the answer: its cosine equals the input, and it lies from 0 to π.

6 Worked example

Worked example

A negative input: arccos(−12)

Find the exact value of arccos(−12). In words: the input is −12; find the one angle from 0 to π whose cosine is −12.

Show the steps and the answer
x = cos θy = sin θ2π/3
The point at 120° on the top half has x-coordinate −12, so arccos(−12) = 2π3.
  1. Check the input: −12 is between −1 and 1.Only numbers from −1 to 1 are left-right positions on the unit circle, so only they have an inverse cosine.
  2. Turn the question into a picture: find the point on the top half of the unit circle whose x-coordinate is −12.The cosine of an angle is the x-coordinate of its point, and the inverse cosine answers only with angles from 0 to π, which sweep the top half.
  3. The input is negative, so look on the top-left quarter, past π2.Left of the vertical axis every x-coordinate is negative, and the top-left quarter is the part of the top half that lies there.
  4. Start from the positive twin: the 60° point is (12,32), so cos60°=12.60° is the special angle whose point sits 12 to the right of center.
  5. Mirror that point across the vertical axis: it becomes (−12,32), at 180°−60°=120°.The mirror keeps the height, flips the sign of the x-coordinate, and turns 60° into 180° − 60°, which lands in the top-left quarter as required.
  6. Convert to radians: 120°×π180°=120π180=2π3.π radians is 180°, and 120 over 180 reduces to 2 over 3 when you divide top and bottom by 60.
  7. Write the answer: arccos(−12)=2π3.2π3 lies from 0 to π and its cosine is −12, which is exactly what the definition asks for.
Answer
arccos(−12) = 2π3, which is 120°
Double-check Take the cosine of the answer: cos 2π3 = −12, the x-coordinate of the 120° point, and 2π3 ≈ 2.09 (rounded) lies from 0 to π ≈ 3.14. The tempting −π3 fails both checks: it is below 0, and cos(−π3) = +12.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 8

Rung 1: almost trivial, arccos 1

Evaluate arccos 1. In words: the input is 1; find the angle from 0 to π whose cosine is 1.

Show the steps and the answer
x = cos θy = sin θ0
With no turn at all the point sits at (1, 0), so arccos 1 = 0.
  1. Check the input: 1 is in [−1,1].The square bracket at 1 means 1 itself is included.
  2. Find the point on the top half whose x-coordinate is 1.Cosine is the x-coordinate of the point on the unit circle.
  3. The only such point is (1, 0), at the far right, where you have not turned at all: the angle is 0.The circle has radius 1, so it reaches x = 1 at one point only, the starting point of every angle.
Answer
arccos 1 = 0
Double-check cos 0 = 1, and 0 is the left end of the range [0, π], which the square bracket includes. 2π also has cosine 1, but it is past π, so it is not the answer.

Rung 2 of 8

Rung 2: a positive input, arccos 32

Evaluate arccos 32. In words: the input is 32; find the angle from 0 to π whose cosine is 32.

Show the steps and the answer
x = cos θy = sin θπ/6
The 30° point sits 32 to the right of center, so arccos 32 = π6.
  1. Check the input: 32≈0.87 (rounded), which is between −1 and 1.3 ≈ 1.73, and half of that is about 0.87.
  2. The input is positive, so look on the top-right quarter, from 0 up to π2.Right of the vertical axis every x-coordinate is positive.
  3. The special point there with x-coordinate 32 is the 30° point, (32,12).Small angle, big x: a small turn leaves the point far to the right, so 30° has the bigger x-coordinate 32, while 60° has 12.
  4. Convert to radians: 30°×π180°=30π180=π6.30 over 180 reduces to 1 over 6 when you divide top and bottom by 30.
Answer
arccos 32 = π6
Double-check cos π6 = 32, and π6 lies from 0 to π. The tempting π3 fails: cos π3 = 12, not 32.

Rung 3 of 8

Rung 3: the middle, arccos 0

Evaluate arccos 0. In words: the input is 0; find the angle from 0 to π whose cosine is 0.

Show the steps and the answer
x = cos θy = sin θπ/2
Straight up, the point (0, 1) is neither left nor right, so arccos 0 = π2.
  1. Check the input: 0 is between −1 and 1.0 is the middle of the domain [−1, 1].
  2. Find the point on the top half whose x-coordinate is 0: it is (0, 1), straight up.An x-coordinate of 0 means neither left nor right of center, and on the top half that is the very top.
  3. Straight up is a quarter turn: 90°, which is π2.A full turn is 2π, and a quarter of 2π is 2π4 = π2.
Answer
arccos 0 = π2
Double-check cos π2 = 0, the x-coordinate of (0, 1), and π2 lies from 0 to π. The tempting answer 0 fails: cos 0 = 1, not 0. The inverse sine does give arcsin 0 = 0, which is why the two get mixed up.

Rung 4 of 8

Rung 4: the left end, arccos(−1)

Evaluate arccos(−1). In words: the input is −1; find the angle from 0 to π whose cosine is −1.

Show the steps and the answer
x = cos θy = sin θπ
A half turn reaches the far left point (−1, 0), so arccos(−1) = π.
  1. Check the input: −1 is in [−1,1].The square bracket at −1 means −1 itself is included.
  2. Find the point on the top half whose x-coordinate is −1: it is (−1,0), at the far left.The circle has radius 1, so it reaches x = −1 at one point only, the far left.
  3. Reaching the far left takes a half turn: 180°, which is π.A half turn is half of 2π.
Answer
arccos(−1) = π
Double-check cos π = −1, and π is the right end of [0, π], included by the square bracket. Two tempting answers fail: −π also has cosine −1 but is negative, outside the range; −π2 is the inverse sine's answer for −1, and cos(−π2) = 0.

Rung 5 of 8

Rung 5: a negative input, arccos(−22)

Evaluate arccos(−22). In words: the input is −22; find the angle from 0 to π whose cosine is −22.

Show the steps and the answer
x = cos θy = sin θ3π/4
The 135° point is the mirror image of the 45° point, with x-coordinate −22.
  1. Check the input: −22≈−0.71 (rounded), which is between −1 and 1.2 ≈ 1.41, and half of that is about 0.71.
  2. The input is negative, so look on the top-left quarter, past π2.Left of the vertical axis every x-coordinate is negative.
  3. Start from the positive twin: the 45° point is (22,22).45° is the special angle whose x-coordinate is 22.
  4. Mirror it across the vertical axis: (−22,22), at 180°−45°=135°.The mirror keeps the height, flips the sign of the x-coordinate, and lands in the top-left quarter.
  5. Convert to radians: 135°×π180°=135π180=3π4.135 over 180 reduces to 3 over 4 when you divide top and bottom by 45.
Answer
arccos(−22) = 3π4
Double-check cos 3π4 = −22, the x-coordinate of the 135° point, and 3π4 lies from 0 to π. The tempting −π4 fails twice: it is negative, and cos(−π4) = +22.

Rung 6 of 8

Rung 6: the look-alike, arccos(−32)

Evaluate arccos(−32). In words: the input is −32; find the angle from 0 to π whose cosine is −32.

Show the steps and the answer
x = cos θy = sin θ5π/6
The 150° point, the mirror of the 30° point, sits 32 to the left of center.
  1. Check the input: −32≈−0.87 (rounded), which is between −1 and 1.3 ≈ 1.73, and half of that is about 0.87.
  2. The input is negative, so look on the top-left quarter, past π2.Left of the vertical axis every x-coordinate is negative.
  3. Start from the positive twin: the 30° point is (32,12).Small angle, big x: of 30° and 60°, the smaller angle has the bigger x-coordinate, 32.
  4. Mirror it across the vertical axis: (−32,12), at 180°−30°=150°.The mirror keeps the height, flips the sign of the x-coordinate, and lands in the top-left quarter.
  5. Convert to radians: 150°×π180°=150π180=5π6.150 over 180 reduces to 5 over 6 when you divide top and bottom by 30.
Answer
arccos(−32) = 5π6
Double-check cos 5π6 = −32, the x-coordinate of the 150° point, and 5π6 lies from 0 to π. Two look-alikes fail: 2π3 has cosine −12, not −32; 7π6 has the right cosine but sits on the bottom half, past π.

Rung 7 of 8

Rung 7: an input that looks like an angle, arccos(π2)

Evaluate arccos(π2). In words: the input is the number π2; find the angle from 0 to π whose cosine is π2.

Show the steps and the answer
−101π/2[−1, 1]
The domain [−1, 1] is shaded; π2 ≈ 1.57 sits to the right of it, so it has no inverse cosine.
  1. Remember what the input is: a cosine value, a left-right position, even though π2 looks like an angle.The inverse cosine takes a position in and gives an angle out.
  2. Check the input: π2≈1.57 (rounded), which is more than 1.π ≈ 3.14, and half of that is about 1.57.
  3. Stop: arccos(π2) is undefined.Every point on the unit circle has its x-coordinate from −1 to 1, so no angle has cosine 1.57.
Answer
Undefined: π2 ≈ 1.57 is outside the domain [−1, 1].
Double-check The tempting answer 0 comes from cos π2 = 0, which runs the other way: the angle π2 goes in and 0 comes out. Try 0 here: cos 0 = 1, not π2, so 0 fails.

Rung 8 of 8

Rung 8: both inverses at once, arccos(−22) − arcsin(−22)

Evaluate arccos(−22) − arcsin(−22). In words: find each angle, then subtract the second from the first.

Show the steps and the answer

arccos(−22) = 3π4, on the top half

arcsin(−22) = −π4, on the right half

3π4−(−π4)=3π4+π4=π

  1. Find arccos(−22): the input is negative, so the point is on the top-left quarter, at 135°, which is 3π4.The inverse cosine answers on the top half, and the 135° point is (−22, 22).
  2. Find arcsin(−22): the input is negative, so the point is on the lower part of the right half, at −45°, which is −π4.The inverse sine answers on the right half, from −π2 to π2, and the −45° point is (22, −22), whose height, the sine, is −22.
  3. Notice that one input gave two different angles, 3π4 and −π4.The two functions answer on different halves: the inverse sine on the right side, the inverse cosine on the cap.
  4. Rewrite the subtraction: 3π4−(−π4)=3π4+π4.Subtracting a negative is adding the positive.
  5. Add: 3π4+π4=4π4=π.The bottoms match, so add the tops: 3π + π = 4π, and 4π over 4 is π.
Answer
π
Double-check Redo it in degrees: 135° − (−45°) = 135° + 45° = 180°, which is π. Each piece checks on its own: cos 3π4 = −22 and sin(−π4) = −22.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: arccos(−12) = −π3, because a negative input should give a negative angle, the way the inverse sine works.
The inverse cosine never answers with a negative angle: its range is [0, π]. And −π3 does not even have the right cosine: turning 60° clockwise lands on the bottom right, where x is positive, so cos(−π3) = 12.
✓ Instead: arccos(−12) = 2π3, the top-left point at 120°, where cos 2π3 = −12.
✗ Not this: arccos(−12) = 4π3, because cos 4π3 = −12.
The cosine is right, but 4π3 (240°) is on the bottom half, past π. Many angles have cosine −12; the inverse cosine returns only its principal value, the one from 0 to π.
✓ Instead: arccos(−12) = 2π3, the only angle from 0 to π with cosine −12.
✗ Not this: cos−1 0 = 1cos0 = 1, reading the small −1 as a power.
In cos−1 the small −1 means run cosine backward, not one over cosine. One over cosine is a different function with its own name, secant.
✓ Instead: cos−1 0 = arccos 0 = π2, because cos π2 = 0 and π2 lies from 0 to π.
✗ Not this: arccos 2 is some angle; look for it on the circle.
The x-coordinates on the unit circle only reach from −1 to 1, so no angle has cosine 2. The number 2 is outside the domain [−1, 1].
✓ Instead: arccos 2 is undefined: there is no angle to find.

Tips and tricks

  • Memory cue: Sine takes the Side, Cosine takes the Cap. Inverse sine answers sit on the right side of the circle, from −π2 to π2; inverse cosine answers sit on the cap, the top half, from 0 to π.
  • Check every answer before you write it: the cosine of your answer must give back the input, and the answer must lie from 0 to π. Both checks must pass.
  • Small angle, big x: a small turn leaves the point far to the right. So 32, the bigger x-value, goes with the smaller angle π6, and 12 goes with the bigger angle π3.
  • Pattern for checking table work: in every row of this lesson's table, arccos x and arcsin x add to π2. For x = −12: 2π3 + (−π6) = 4π6 − π6 = 3π6 = π2. If your two answers do not add to π2, one or both are wrong: check each value and the half it sits on.
  • Do not memorize the table. Rebuild any row in seconds: picture the top half of the unit circle, find the point whose x-coordinate is the input, and name its angle.
  • Write the final answer as an exact value in radians, such as 2π3, not 120° or 2.09, unless the question asks for degrees or a decimal.

7 The trap

Answering a negative input with a negative angle, the way the inverse sine does: arccos(−12) = −π3 is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past π2, up to π: here 2π3. Catch the slip by taking the cosine of what you wrote: cos(−π3) = +12, the wrong sign.

Flash cards

Say the answer out loud, then flip.

In plain words, what does arccos x ask for?
  • The one angle from 0 to π whose cosine is x.
  • Picture a protractor whose straight edge reads −1 at the left end and 1 at the right end: find x on the edge, look straight up to the rim and read the angle there.
What are the domain and range of arccos?
  • Domain: [−1, 1], the inputs it accepts.
  • Range: [0, π], the angles it gives back.
What is arccos(−22)?
  • 3π4
  • The twin without the minus sign is arccos(22) = π4. A negative input lands on the top-left quarter, so mirror it across the vertical axis: π − π4 = 4π4 − π4 = 3π4.
  • Not −π4: arccos never answers below 0.
Why does arccos answer from 0 to π instead of from −π2 to π2?
  • From 0 to π, the left-right position on the unit circle slides from 1 down to −1 without turning back, so each input from −1 to 1 gets exactly one angle.
  • From −π2 to π2, the position is never negative, and it repeats: π6 and −π6 both sit at 32.

Lesson 4 of 8

The inverse tangent

Subject: MathematicsLeans on: Tangent on the unit circleLeans on: Dividing fractionsLeans on: Dividing by zeroLeans on: RationalizingLeans on: Negative anglesLeans on: Radians to degreesLeans on: Tangent repeats every half turnLeans on: Round and square bracketsLeans on: Reflecting over y = xLeans on: The range of arcsinLeans on: Subtracting a negativeLeans on: Adding fractions with πOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Think of a ramp. Its steepness is one number: how far it rises for each foot it runs forward. Tangent turns an angle into that steepness, since tan θ is rise divided by run. The inverse tangent, written arctan, works backward: you hand it a steepness and it hands back the angle. Every steepness can happen: 0 for flat ground, 1 for a 45° ramp, 1000 for an almost vertical cliff, a negative number for a downhill ramp. So arctan takes any number. But no ramp is perfectly vertical: straight up has no run, and rise ÷ 0 has no value. So the angle you get back is always strictly between straight down and straight up, −π2 and π2, and never either one.

2 Picture it

x = cos θy = sin θπ/4
At π4 the height and the across are both 22, so tan π4 = 1 and arctan 1 = π4.

Reminder

Reminder: Tangent on the unit circle, Dividing fractions, Dividing by zero, Rationalizing, Negative angles, Radians to degrees, Tangent repeats every half turn, Round and square brackets, Reflecting over y = x, The range of arcsin, Subtracting a negative, Adding fractions with π
  • Tangent on the unit circle. tan θ = sinθcosθ, the point's height divided by its across. At π4 the point is (22, 22), so tan π4 = 1.
  • Dividing fractions. Flip the second fraction and multiply: 32 ÷ 12 = 32 × 21 = 3.
  • Dividing by zero. A number divided by 0 has no value: 10 is undefined, so tan π2 does not exist.
  • Rationalizing. Multiply top and bottom by the root in the bottom: 13 = 1·33·3 = 33. This multiplies by 33, which is 1, so the value does not change.
  • Negative angles. A negative angle turns clockwise from the positive x-axis: −π3 is a 60° turn clockwise, ending below the x-axis on the right.
  • Radians to degrees. Replace π with 180°: −π3 = −180°3 = −60°.
  • Tangent repeats every half turn. Half a turn away the point is (−across, −height), and (−height) ÷ (−across) = height ÷ across, so tan 5π4 = tan π4 = 1.
  • Round and square brackets. A round bracket leaves an end out and a square bracket keeps it: (−π2, π2) leaves out both ends, [−π2, π2] keeps both.
  • Reflecting over y = x. Swap the coordinates of every point: (π4, 1) on y = tan x becomes (1, π4) on y = arctan x.
  • The range of arcsin. arcsin answers from −π2 to π2 with both ends included: arcsin 1 = π2.
  • Subtracting a negative. Subtracting a negative is adding: 5 − (−2) = 5 + 2 = 7.
  • Adding fractions with π. Rewrite with a common bottom, then add the tops: π6 + π4 = 2π12 + 3π12 = 5π12.

3 Why

Tangent repeats every half turn, so one number is the tangent of many angles: tan π4 = tan 5π4 = 1. To get one answer we keep one piece of the tangent graph that rises through every number exactly once. Choosing the piece from −π2 to π2 is a convention: it is unbroken, holds 0, and is the right half of the circle that arcsin uses. Without one agreed piece, arctan(−1) could be −π4 to one person and 3π4 to another. The ends are left out because cos θ = 0 there, and tangent, sine ÷ cosine, would divide by zero.

4 The rule

y= arctan x, also written y=tan−1 x, means tany=x and −π2<y<π2.

Domain: all real numbers, (−∞,∞). Range: (−π2,π2), with both ends left out. Horizontal asymptotes: y=−π2 and y=π2.

The same idea, five ways

Say it

Say “arc tangent of x” (ark TAN-jent) or “tan inverse of x”. Both mean the angle whose tangent is x. Never read it as “one over tan x”.

Write it

The inverse tangent of a number is the one angle strictly between −π2 and π2 whose tangent is that number; that angle is called the principal value.

In math
  • y = arctan x
  • y = tan⁻¹ x
  • tan y = x and −π2 < y < π2
  • domain: (−∞, ∞), all real numbers
  • range: (−π2, π2), that is {y | −π2 < y < π2}
  • graph: horizontal asymptotes y = −π2 and y = π2
Like

A ramp tilt finder: tell it how many feet a ramp rises per foot forward and it tells you the tilt. It works for any steepness, but it never says straight up or straight down.

See it
−π/20π/2
The outputs of arctan fill the line strictly between −π2 and π2, with open dots because both ends are left…

The same idea, other ways

As a picture: the mirror

Take the piece of y = tan x between −π2 and π2, its restricted domain. It climbs from far below to far above and hugs two vertical walls, the asymptotes x = −π2 and x = π2. It passes the horizontal line test, so it is a one-to-one function and has an inverse function. Flip it over the dashed line y = x by swapping the coordinates of every point: (π4, 1) becomes (1, π4). The flipped curve is y = arctan x. Its walls turn into a floor y = −π2 and a ceiling y = π2, the two horizontal asymptotes, and it runs left and right forever, because every input works.

(π/4, 1)(1, π/4)−π−π/2π/2π−22
Flip the middle branch of tan, between its walls at −π2 and π2, over the dashed line y = x.
On the unit circle

Keep only the right half of the unit circle and cut out its very top point (0, 1) and its very bottom point (0, −1). Every answer of arctan is an angle whose side ends on what is left. The tangent of that angle is the point's height divided by its across, which is the steepness of the side. Points above the x-axis give positive tangents, points below it give negative ones, and the point (1, 0) gives 0. At the two cut-out points the across is 0, so there is no tangent, and their angles, π2 and −π2, are never answers.

x = cos θy = sin θπ/3
At π3 the point is (12, 32); its height divided by its across is 3, so arctan 3 = π3.
As a story: ramps

A skateboard ramp that rises 1 foot for every 1 foot it runs has steepness 1, and arctan 1 = π4, a 45° tilt. A ramp that rises 3 feet, about 1.73, per foot is tilted π3, which is 60°. Build steeper and steeper ramps, rising 10, then 100, then 1000 feet per foot forward, and the tilt creeps toward 90° but never gets there, because a wall that goes straight up does not run forward at all. A downhill ramp has a negative steepness and a negative tilt: steepness −1 means a tilt of −π4.

θrun 1rise 1√2
Rise 1 over run 1 is a steepness of 1, and the angle θ at the left is π4, so arctan 1 = π4.
With numbers

The table shows angles creeping up toward 90° and their tangents, rounded. Read the bottom row from left to right: the tangent climbs from 1 to about 572.96, and it shoots up fastest as the angle gets close to 90°. Now read the table upward, which is what arctan does: an input of about 572.96 gives back only about 89.9°. No input, however large, gives 90° itself. That ceiling is the horizontal asymptote y = π2, since π2 is 90°. Large negative inputs work the same way toward the floor y = −π2.

input θoutput tan θ45°160°√3 ≈ 1.7380°≈ 5.6789°≈ 57.2989.9°≈ 572.96
Each step toward 90° makes the tangent far bigger.
Why it must be true

Suppose some number x had arctan x = π2. Then, by the definition, tan π2 = x. But the point at π2 is (0, 1), so tan π2 = 10, and dividing by zero has no answer: 12 cookies cannot be shared among 0 friends. So no x works, and π2 is not in the range. The same holds at −π2, where the point is (0, −1). Every angle strictly between them has an across bigger than 0, so its tangent exists, and those angles are exactly the outputs of arctan.

12 ÷ 3 = 412 ÷ 2 = 612 ÷ 1 = 1212 ÷ 0 = ?0 groups: nowhere to put them, so no answer
12 shared among 3, 2 and 1 groups works, but among 0 groups it has no answer.
angle θpoint (cos θ, sin θ)tan θ = sin θ ÷ cos θread backward by arctan
−π2(−90°)(0,−1)no value: −1 ÷ 0never an answer
−π3(−60°)(12,−32)−3arctan(−3) = −π3
−π4(−45°)(22,−22)−1arctan(−1) = −π4
−π6(−30°)(32,−12)−33arctan(−33) = −π6
0 (0°)(1, 0)0arctan 0 = 0
π6(30°)(32,12)33arctan 33 = π6
π4(45°)(22,22)1arctan 1 = π4
π3(60°)(12,32)3arctan 3 = π3
π2(90°)(0, 1)no value: 1 ÷ 0never an answer

5 How

  1. Read arctan(a) as a question: which angle, strictly between −π2 and π2, has tangent a? The input a is a tangent value, a steepness. The answer is an angle.
  2. If a has a square root in its bottom, rewrite it to match the table: 13 = 33.
  3. Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.
  4. Find a in the tan θ column of the table and read the angle at the start of its row.
  5. Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between −π2 and π2.

Finding an exact inverse tangent

1
Does the number have a square root in its bottom, such as 13?
YesRationalize it first: 13 = 33. Then go on.
NoGo on.
↓
2
Is the number 0?
YesThe answer is 0, because tan 0 = 01 = 0 and 0 is in the range. Stop.
NoGo on.
↓
3
Is the number positive?
YesSearch above the x-axis: the answer is between 0 and π2.
NoIt is negative, so search below the x-axis: the answer is a negative angle between −π2 and 0.
↓
4
Is the number in the tangent column of the table: −3, −1, −33, 33, 1 or 3?
YesRead the angle in its row. It is your answer.
NoIt is not one of the special values. The angle still exists, because arctan takes every real number. Leave it written as arctan of the number, which is already exact, and place it between two table angles whose tangents surround it. Past 3 no table tangent is larger, so the angle lies between π3 and π2; below −3 it lies between −π2 and −π3.
↓
5
Did you get π2, −π2, or an angle outside them, such as 3π4 or 7π4?
YesThat cannot be an inverse tangent. Search again on the right half of the circle, without its top and bottom points.
NoWrite the answer and check it.
  1. Turn arctan(a) into a question: which angle θ, with −π2 < θ < π2, has tan θ = a?
  2. Tidy the number so it can be matched: if it has a root in its bottom, multiply top and bottom by that root, so 13 becomes 33.
  3. Pick where to search on the right half of the circle: above the x-axis (0 < θ < π2) when a is positive, below it (−π2 < θ < 0) when a is negative, and θ = 0 when a = 0. On the right half the across is positive, so the tangent has the same sign as the height.
  4. Find a in the tangent column of the special-angle table and read the angle in its row.
  5. Check: work out tan θ = sinθcosθ from the point on the circle and confirm it equals a, then confirm that θ is strictly between −π2 and π2.

6 Worked example

Worked example

An exact value with a negative input: arctan(−3)

Find the exact value of arctan(−3).

Show the steps and the answer
input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
Arctan reads this table upward: the cell holding −3 in the tan θ row points up to −π3.
−π/3terminal sideinitial side
A 60° clockwise turn ends below the x-axis on the right half, where tangents are negative.
  1. Say what the question asks: find the one angle θ, with −π2<θ<π2, whose tangent is −3.That is the definition of arctan. The input −3 is a tangent value, and the output must be an angle on the right half of the circle, not at its very top or bottom.
  2. Decide where to search: below the x-axis, between −π2 and 0.Tangent is height ÷ across. On the right half the across is positive, so a negative tangent needs a negative height, which means a point below the x-axis.
  3. Find −3 in the tanθ row of the table and follow the arrow up: it sits under −π3.The point at −π3 is (12, −32), and its height divided by its across is −3. Reading the table from the bottom row up is exactly what arctan does.
  4. Make sure the angle is allowed: −π3 is −60°, and −90°<−60°<90°.Other angles also have tangent −3, such as 2π3 (120°) and 5π3 (300°), but they are outside the range, so they cannot be the answer.
  5. Write the answer: arctan(−3)=−π3.−π3 is the principal value: the only angle in the range whose tangent is −3.
Answer
arctan(−3) = −π3, which is −60°
Double-check Work out tan(−π3) from its point (12, −32): (−32) ÷ 12 = (−32) × 21 = −3, the number we started with. And −π3 is strictly between −π2 and π2.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

Rung 1, almost trivial: arctan(0)

Find arctan(0).

Show the steps and the answer
x = cos θy = sin θ0
At angle 0 the point is (1, 0): height 0, across 1, so the tangent is 0.
  1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=0?arctan takes a tangent value and returns the one allowed angle with that tangent.
  2. A tangent is 0 when the point's height is 0, so look for points on the x-axis: (1, 0) at angle 0 and (−1,0) at angle π.tan θ = height ÷ across, and a fraction is 0 exactly when its top is 0 and its bottom is not. This step finds every point where the tangent could be 0.
  3. Keep (1, 0) and drop (−1,0).(−1, 0) is on the left half, so its angle π is outside the range.
  4. Answer: arctan(0)=0.0 is the only allowed angle with tangent 0.
Answer
arctan(0) = 0
Double-check Plug the answer back in: tan 0 = 0 ÷ 1 = 0, the number we started with, and 0 is between −π2 and π2.

Rung 2 of 7

Rung 2, a first special angle: arctan(1)

Find arctan(1).

Show the steps and the answer
x = cos θy = sin θπ/4
At π4 the height and the across are both 22, so their quotient is 1.
θ11√2
Two equal legs make two equal sharp angles, so θ = 45°, which is π4.
  1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=1?That is the definition of arctan: the input is a tangent, the output is an allowed angle.
  2. A tangent of 1 means height ÷ across =1, so the height and the across are equal.A fraction equals 1 when its top equals its bottom.
  3. On the right half, the height equals the across at π4, where the point is (22,22).A 45° angle sits halfway between the two axes, so its point is as high as it is far across.
  4. Answer: arctan(1)=π4.The only other point with equal height and across is at 5π4, on the left half, outside the range.
Answer
arctan(1) = π4, which is 45°
Double-check tan π4 = 22 ÷ 22 = 1. A second way: a ramp that rises 1 foot per foot of run has two equal legs, so its two sharp angles are equal, and since they add to 90°, each is 45°.

Rung 3 of 7

Rung 3, a bigger tangent: arctan(3)

Find arctan(3).

Show the steps and the answer
x = cos θy = sin θπ/3
At π3 the point is (12, 32): the height is 3 times the across.
  1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=3?That is the definition of arctan.
  2. 3 is positive, so search above the x-axis: θ is between 0 and π2.On the right half the across is positive, so a positive tangent needs a positive height.
  3. Find 3 in the tanθ column of the table: it sits in the row of π3.The point at π3 is (12, 32), and 32 ÷ 12 = 3.
  4. Answer: arctan(3)=π3.π3 is in the range and has tangent 3.
  5. Watch the gotcha: 3 is not 32.32 is a height or an across on the circle, a sine or a cosine. 3, about 1.73, is too big to be a sine or a cosine, but it is a perfectly good tangent.
Answer
arctan(3) = π3, which is 60°
Double-check tan π3 = 32 × 21 = 3. A second way, by the memory device: the tangents 33, 1, 3 grow with the angles π6, π4, π3, and 3 is the largest, so it belongs to the largest angle, π3.

Rung 4 of 7

Rung 4, a negative input: arctan(−1)

Find arctan(−1).

Show the steps and the answer
−π/4terminal sideinitial side
A 45° clockwise turn ends below the x-axis, halfway down to the bottom of the circle.
input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
The cell holding −1 in the tan θ row points up to −π4.
  1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=−1?That is the definition of arctan.
  2. −1 is negative, so search below the x-axis: θ is between −π2 and 0.On the right half the across is positive, so a negative tangent needs a negative height.
  3. A tangent of −1 means the height is the across with its sign flipped. Below the x-axis that happens 45° down, at the point (22,−22); in the tanθ row of the table, −1 sits under −π4.Height and across have the same size and opposite signs, so their quotient is −1.
  4. Name the angle by turning clockwise: −π4.The range runs from −π2 to π2, so a point below the x-axis gets a negative name. The same point is also called 7π4, but 7π4 is outside the range.
  5. Answer: arctan(−1)=−π4.It is the only allowed angle with tangent −1.
  6. Watch the gotcha: do not answer 3π4.tan 3π4 = 22 ÷ (−22) = −1 as well, but 3π4 is 135°, on the left half, outside the range.
Answer
arctan(−1) = −π4, which is −45°
Double-check tan(−π4) = (−22) ÷ 22 = −1, the number we started with, and −90° < −45° < 90°.

Rung 5 of 7

Rung 5, a number in disguise: arctan(−13)

Find arctan(−13).

Show the steps and the answer
input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
After rewriting, −33 is in the tan θ row, and its arrow points up to −π6.
  1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=−13?That is the definition of arctan.
  2. Rewrite the number to match the table: −13=−1·33·3=−33.Multiplying top and bottom by 3 multiplies by 1, so the value does not change, and 3 · 3 = 3.
  3. The number is negative, so search below the x-axis: θ is between −π2 and 0.On the right half the across is positive, so a negative tangent needs a negative height.
  4. Find −33 in the tanθ row: it sits under −π6.The point at −π6 is (32, −12), and (−12) ÷ 32 = −13 = −33.
  5. Answer: arctan(−13)=−π6.−π6 is in the range and has the right tangent.
  6. Watch the gotcha: −13 and −33 are the same number written two ways.If you search the table for −13 without rewriting it, you may think it is missing and give up.
Answer
arctan(−13) = −π6, which is −30°
Double-check tan(−π6) = (−12) ÷ 32 = (−12) × 23 = −13, the number we started with, and −90° < −30° < 90°.

Rung 6 of 7

Rung 6, what can go in and what can come out

Answer each, with a reason.
(a) Does arctan(1000) have an answer, and roughly where is it?
(b) Can arctan x equal 2π3 for some number x?
(c) Can arctan x equal π2 for some number x?

Show the steps and the answer
0
Domain of arctan: the whole line is shaded, so every number, 1000 included, is an allowed input.
−1.570801.5708−π/2π/22π/3
Range of arctan: open dots at −π2 and π2, and 2π3 lies outside the shaded part.
  1. (a) Ask whether 1000 is an allowed input: yes, the domain of arctan is all real numbers.A tangent is a steepness, and any steepness can happen: a ramp rising 1000 feet per foot of run is very steep, but it is not straight up.
  2. (a) Place the answer: tanπ3=3, about 1.73, is far below 1000, and the tangent keeps rising as the angle climbs toward π2. So arctan(1000) is between π3 and π2, very close to π2.On the right half a bigger tangent means a bigger angle, and no input reaches π2.
  3. (b) Compare 2π3 with the range: 2π3 is 120°, more than 90°.Every output of arctan is strictly between −90° and 90°, so 120° can never come out. tan 2π3 = −3 is a real number, but arctan(−3) is −π3, not 2π3.
  4. (c) Suppose arctan x=π2. Then tanπ2 would equal x.This is the definition read the other way: if y = arctan x, then tan y = x. The step tests whether any x could work.
  5. (c) The point at π2 is (0, 1), so tanπ2=10, which has no value. No x works.Dividing by zero has no answer, so π2 is left out of the range. The graph of arctan approaches the line y = π2 but never touches it.
Answer
  • (a) Yes. arctan(1000) exists, between π3 and π2 and very close to π2.
  • (b) No. 2π3 is outside the range (−π2, π2).
  • (c) No. tan π2 does not exist, so π2 is not in the range.
Double-check Read the two number lines: the domain line is shaded everywhere, so 1000 is allowed; the range line stops at an open dot at π2, about 1.57, and never reaches 2π3, about 2.09.

Rung 7 of 7

Rung 7, the hardest: arctan(3) − arctan(−1)

Find the exact value of arctan(3) − arctan(−1).

Show the steps and the answer

arctan(3) = π3

arctan(−1) = −π4

π3−(−π4)=4π12+3π12

=7π12

  1. Say what it asks: find each inverse tangent, then subtract the second angle from the first.Each arctan is one number, an angle in radians, so the whole expression is a subtraction of two numbers.
  2. arctan(3)=π3.tan π3 = 3 and π3 is in the range, as in rung 3.
  3. arctan(−1)=−π4.tan(−π4) = −1 and −π4 is in the range, as in rung 4.
  4. Subtract: π3−(−π4)=π3+π4.Subtracting a negative is adding.
  5. Add with the common bottom 12: π3=4π12 and π4=3π12, so the sum is 7π12.Fractions add only when their bottoms match. 12 is the smallest number that both 3 and 4 go into evenly, so multiply the top and bottom of π3 by 4 and of π4 by 3.
  6. Watch the gotcha: the answer 7π12 is bigger than π2, and that is fine.The range rule applies to each arctan, not to a number built from two of them. The rule mattered in step 3: answering 3π4 there would give π3 − 3π4 = 4π12 − 9π12 = −5π12, which is wrong.
Answer
7π12
Double-check Check the two pieces first: tan π3 = 3 and tan(−π4) = −1. Then a second way, in degrees: 60° − (−45°) = 105°, and 7π12 = 7 × π12 = 7 × 15° = 105°, the same angle.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: arctan(−1) = 3π4, because tan 3π4 = −1.
tan 3π4 really is −1, but 3π4 is 135°, on the left half of the circle. The inverse tangent answers only with an angle strictly between −π2 and π2.
✓ Instead: arctan(−1) = −π4: it is in the range, and tan(−π4) = (−22) ÷ 22 = −1.
✗ Not this: arctan(−1) = 7π4, because 7π4 ends at the same point as −π4.
It is the right point with the wrong name. 7π4 is 315°, far past π2, so it is outside the range. For a point below the x-axis the range uses the clockwise name, a negative angle.
✓ Instead: arctan(−1) = −π4, a 45° turn clockwise.
✗ Not this: The range of arctan is [−π2, π2], the same as arcsin, so arctan of a huge number is π2.
At π2 the point is (0, 1), and tan π2 = 10 has no value, so no number has π2 as its inverse tangent. The same is true at −π2.
✓ Instead: The range is (−π2, π2), with round brackets. A huge input gives an angle close to π2 but still less than it.
✗ Not this: arctan 2 has no answer, the same way arcsin 2 has none.
arcsin takes only numbers from −1 to 1, because a sine is a height on a circle of radius 1. A tangent is a steepness, and a steepness can be any number, so arctan takes every real number.
✓ Instead: arctan 2 exists. It is not one of the special angles, but tan π3 = 3 ≈ 1.73 is less than 2 and the tangent keeps rising toward π2, so arctan 2 lies between π3 and π2.
✗ Not this: tan⁻¹(3) means 1tan3.
On a function name the ⁻¹ means inverse, not one over. One over tangent is a different function, the cotangent. The reciprocal (tan π3)⁻¹ = 13 = 33 turns an angle into a number; the inverse tan⁻¹(3) turns the number 3 back into an angle.
✓ Instead: tan⁻¹(3) = arctan 3 = π3.

Tips and tricks

  • Memory cue: arctan lives on the right half of the circle, the same half as arcsin, with the top and bottom points punched out because the across is 0 there. Punched-out ends get round brackets: (−π2, π2).
  • Memory device for the table: the tangents of π6, π4 and π3 are 33, 1 and 3, and each is 3 times the one before: 33 × 3 = 33 = 1, then 1 × 3 = 3. The negative angles have the same tangents with a minus sign.
  • Check every answer two ways: is it strictly between −π2 and π2, that is between −90° and 90°? Does its tangent, worked out as sine ÷ cosine, give back the number you started with?
  • When you write up a solution, put the definition line first: y = arctan x means tan y = x and −π2 < y < π2. Seeing the range on the page keeps you from answering 3π4 or 7π4.
  • In y = arctan x, x is a slope (a tangent value) and y is an angle. Do not read them as the horizontal and vertical positions of a unit-circle point.

7 The trap

Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of 3π4, of 7π4 and of −π4, and it is tempting to write the first one that comes to mind. Only the principal value, −π4, lies strictly between −π2 and π2, so arctan(−1) = −π4. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.

Flash cards

Say the answer out loud, then flip.

What goes into the inverse tangent, and what comes out?
  • In: a steepness, which can be any real number. The domain is (−∞, ∞).
  • Out: an angle strictly between −π2 and π2 (between −90° and 90°). The range is (−π2, π2).
Why are −π2 and π2 left out of the range of arctan?
  • At those angles cos θ = 0, so tangent, sine ÷ cosine, would divide by zero, like a vertical ramp with no run.
  • The graph only creeps toward those heights, so y = −π2 and y = π2 are horizontal asymptotes.
tan 5π4 = 1. Is arctan(1) = 5π4?
  • No, arctan(1) = π4, the principal value.
  • 5π4 also has tangent 1, but it is outside the range (−π2, π2), so arctan never gives it.
If a < 0, where on the unit circle is the angle arctan(a)?
  • On the right half, below the x-axis.
  • The angle is negative, strictly between −π2 and 0, like a downhill ramp.

Lesson 5 of 8

Exact values by the sign and the quadrant

Subject: MathematicsLeans on: Sine, cosine and the unit circleLeans on: Tangent from the pointLeans on: Negative anglesLeans on: Signs by quadrantLeans on: The three rangesLeans on: Allowed inputsLeans on: Inverse notationLeans on: Subtracting from πLeans on: Adding fractionsLeans on: Subtracting a negativeLeans on: Dividing fractionsLeans on: RationalizingLeans on: Radians and degreesOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Finding an exact inverse value is like giving a taxi driver an address in two parts. The first part says how far: the reference angle, the size of the turn, which you read off the special angles while ignoring any minus sign. The second part says which side of town: the quadrant. The sign of the input picks the side, but each inverse function drives only in its own neighborhood. The inverse sine and the inverse tangent stay on the right half of the circle, so a negative input sends them below the x-axis: a negative angle. The inverse cosine stays on the top half, so a negative input sends it to the left side: an angle past π2.

2 Picture it

QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
Sine is negative in Quadrants III and IV, cosine in II and III, tangent in II and IV.

Reminder

Reminder: Sine, cosine and the unit circle, Tangent from the point, Negative angles, Signs by quadrant, The three ranges, Allowed inputs, Inverse notation, Subtracting from π, Adding fractions, Subtracting a negative, Dividing fractions, Rationalizing, Radians and degrees
  • Sine, cosine and the unit circle. The point at angle θ on the unit circle is (cos θ, sin θ): cosine is the x-coordinate and sine is the height. At π3 the point is (12, 32), so cos π3 = 12 and sin π3 = 32.
  • Tangent from the point. Tangent is the height divided by the x-coordinate, y ÷ x. At π4 the point is (22, 22), so tan π4 = 1.
  • Negative angles. A negative angle turns clockwise from the positive x-axis: −π6 is a 30° clockwise turn and ends in Quadrant IV.
  • Signs by quadrant. In Quadrant II, x < 0 and y > 0, so cosine is negative and sine is positive. In Quadrant IV, x > 0 and y < 0, so sine and tangent are negative and cosine is positive.
  • The three ranges. arcsin: [−π2, π2]. arccos: [0, π]. arctan: (−π2, π2). A square bracket includes its end, and a round one leaves it out.
  • Allowed inputs. arcsin and arccos accept only inputs from −1 to 1, because a sine or cosine is a coordinate on a circle of radius 1. So arcsin(2) has no answer, while arctan accepts every number.
  • Inverse notation. sin⁻¹ x, cos⁻¹ x and tan⁻¹ x mean arcsin x, arccos x and arctan x. For example cos⁻¹(1) = 0, the angle whose cosine is 1. The −1 is not a power.
  • Subtracting from π. Write π with the bottom you need, then subtract the tops: π − π3 = 3π3 − π3 = 2π3.
  • Adding fractions. Fractions add when their bottoms match: 13 + 16 = 26 + 16 = 36 = 12.
  • Subtracting a negative. Subtracting a negative adds its positive: 5 − (−2) = 5 + 2 = 7.
  • Dividing fractions. Dividing by a fraction means multiplying by its flip: 12 ÷ 32 = 12 · 23 = 13.
  • Rationalizing. To clear a root from the bottom, multiply the top and the bottom by that root: 12 = 22, because 2 · 2 = 2.
  • Radians and degrees. π radians is 180°, so π6 = 30°, π4 = 45° and 3π4 = 135°.

3 Why

Each range is half of the circle, chosen earlier so each input has exactly one answer. The right half (arcsin, arctan) is Quadrant I above the x-axis and Quadrant IV below. Sine is the height, and tangent is the height divided by a positive left-right distance, so a negative input means below: Quadrant IV, or straight down when the inverse sine's input is −1. The top half (arccos) is Quadrant I on the right and Quadrant II on the left. Cosine is the left-right position, so a negative input means left: Quadrant II, or the left end, π, when the input is −1. Mirror images give the two answers: −r is r reflected across the x-axis, and π − r is r reflected across the y-axis.

4 The rule

Let r be the reference angle: the angle from 0 to π2 whose sine, cosine or tangent (the one being undone) equals the input without its minus sign.

A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π−r for arccos. In symbols: arcsin(−x)=−arcsin x, arctan(−x)=−arctan x, arccos(−x)=π− arccos x. The result is the principal value: the one angle inside the range.

The same idea, five ways

Say it

The reference angle is how far the answer's side sits from the x-axis, ignoring which way.

Write it

The reference angle for an input is the angle from 0 to π2 whose sine, cosine or tangent equals the input without its minus sign. It is also the angle between the answer's terminal side (the side where the turn ends) and the nearest part of the x-axis.

In math
  • 0≤r≤π2
  • r in [0, π2]
  • input −22 for sine: r = π4, because sin π4 = 22
  • answer = r, −r or π − r
Like

Like the slant of a ladder: 45° off the ground is the same slant whether the ladder leans left or right. The slant is the reference angle, and the side it leans to is the quadrant.

See it
π/4
The answer 3π4 ends π4 short of the negative x-axis, so its reference angle is π4.

The same idea, other ways

As a picture

Picture the unit circle with the half each inverse may use shaded. arcsin answers on the right half, from straight down at −π2 to straight up at π2, both ends included; arctan uses the same half with both ends left out. arccos answers on the top half, from 0 on the right to π on the left. A negative sine is a point below the x-axis, and on the right half those points are in Quadrant IV, plus the bottom end, −π2, for an input of −1. A negative cosine is a point left of the y-axis, and on the top half those points are in Quadrant II, plus the left end, π, for an input of −1.

x = cos θy = sin θ3π/4
On the top half, the point with x-coordinate −22 sits in Quadrant II, at 3π4.
As a story

Picture a round town cut into four quarters by a north-south road and an east-west road. The inverse sine driver delivers only in the east half, and so does the inverse tangent driver. The inverse cosine driver delivers only in the north half. Tell the inverse sine driver the address is south of the east-west road, and only one quarter of that driver's territory fits: the southeast, Quadrant IV. Tell the inverse cosine driver the address is west of the north-south road, and only the northwest fits: Quadrant II. Two addresses sit right on a road, at the edge of a quarter: due south, for the inverse sine of −1, and due west, for the inverse cosine of −1. The reference angle is the size of the turn between the east-west road and the line from the town centre to the house. The sign says which side of a road the house is on.

Rule of thumb

Cover the minus sign and solve the positive version first. Then put the minus sign back the way the function wants it: arcsin and arctan put it on the angle, and arccos takes the angle away from π. With numbers: arcsin(12) = π6, so arcsin(−12) = −π6. arccos(12) = π3, so arccos(−12) = π − π3 = 2π3.

arcsin(−x) = −arcsin x

arctan(−x) = −arctan x

arccos(−x) = π − arccos x

Why it must be true

Here r is the reference angle, strictly between 0 and π2. Turning by −r instead of r mirrors the point across the x-axis: x stays the same and the height changes sign. So sin(−r) = −sin r and tan(−r) = −tan r, which is why −r answers a negative sine or tangent, and −r stays on the right half. That move fails for cosine, because it keeps x. Mirror across the y-axis instead: the point at r goes to the point at π − r, the height stays and x changes sign. So cos(π − r) = −cos r, and π − r stays on the top half.

x = cos θy = sin θ5π/6
The point at 5π6, (−32, 12), is the point at π6, (32, 12), mirrored across the y-axis.
In degrees, with small numbers

Degrees can make the pattern feel familiar, with π radians = 180°. The reference angle for 12 is 30° for sine and 60° for cosine. So arcsin(−12) = −30°, a 30° turn clockwise, and arccos(−12) = 180° − 60° = 120°, which stops 60° short of a half turn. And arctan(−1) = −45°. Every arcsin and arctan answer lies between −90° and 90°, and every arccos answer between 0° and 180°. Back in radians: −30° = −π6, 120° = 2π3 and −45° = −π4.

−30°terminal sideinitial side
A negative angle turns clockwise: −30° ends in Quadrant IV.
FunctionRange (half of the circle)Input 0 or positive (r is the reference angle)Input negativeExample
arcsin x[−π2, π2]: right halfQuadrant I or its edge: rQuadrant IV, or straight down when x = −1: −rarcsin(−12) = −π6
arccos x[0, π]: top halfQuadrant I or its edge: rQuadrant II, or π itself when x = −1: π − rarccos(−32) = 5π6
arctan x(−π2, π2): right half, ends left outQuadrant I or its edge: rQuadrant IV: −rarctan(−1) = −π4

Part 1: The inverse sine of a negative input

The inverse sine answers only on the right half of the circle, from straight down (−π2) to straight up (π2). Sine is the height of the point. A negative input asks for a point below the x-axis, and the part of the right half below the x-axis is Quadrant IV together with its lowest point, straight down, which answers −1. To get there without leaving the range, you turn clockwise, so the answer is a negative angle: minus the reference angle.

  • Range: [−π2, π2], the right half: Quadrants IV and I, with straight down and straight up as its ends
  • Input 0 or positive: the answer is r, in Quadrant I or on its edge
  • Input negative: the answer is −r, in Quadrant IV, or straight down at −π2 when the input is −1
  • In symbols: arcsin(−x) = −arcsin x
x = cos θy = sin θ−π/6
Turning π6 clockwise lands at (32, −12), whose height is −12.

Worked example

Arcsin(−12)

Find arcsin(−12). In plain words: find the angle in [−π2, π2] whose sine is −12.

Show the steps and the answer
input θoutput sin θ00π/61/2π/4√2/2π/3√3/2π/21↑ solve: output given, read every input above it
Reference angle on the special-angle table: find 12 in the sine row and follow the arrow up to π6.
  1. Reference angle: which angle from 0 to π2 has sine 12? It is π6.The point at π6 is (32, 12), and the sine is its height, 12. So r = π6.
  2. Sign: −12 is negative.A negative sine means a point below the x-axis.
  3. Quadrant: IV.The range covers Quadrants IV and I, and only Quadrant IV is below the x-axis.
  4. Angle: −π6.Turning r = π6 clockwise reaches Quadrant IV, and a clockwise turn is written with a minus sign.
Answer
arcsin(−12) = −π6
Double-check The point at −π6 is (32, −12), so sin(−π6) = −12, the input. And −π6, which is −30°, lies between −π2 and π2.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: arcsin(−12) = 7π6, because sin 7π6 = −12.
The sine is right, but 7π6 is in Quadrant III, on the left half of the circle. The inverse sine never answers outside [−π2, π2].
✓ Instead: −π6: the same sine, and inside the range.
Tips and tricks
  • For a negative input, an arcsin answer always starts with a minus sign and is never below −π2.

Part 2: The inverse cosine of a negative input

The inverse cosine answers only on the top half of the circle, from the right end (0) over to the left end (π). Cosine is how far right or left the point is. A negative input asks for a point left of the y-axis, and the part of the top half on the left is Quadrant II together with the left end, which answers −1. So the answer goes past π2: turn all the way to π, then come back by the reference angle. It is never a negative angle.

  • Range: [0, π], the top half: Quadrants I and II, with 0 and π as its ends
  • Input 0 or positive: the answer is r, in Quadrant I or on its edge (r = π2 when the input is 0)
  • Input negative: the answer is π − r, in Quadrant II, or π itself when the input is −1
  • In symbols: arccos(−x) = π − arccos x
x = cos θy = sin θ5π/6
At 5π6 the point is (−32, 12): left of the y-axis, still on the top half.

Worked example

Arccos(−32)

Find arccos(−32). In plain words: find the angle in [0, π] whose cosine is −32.

Show the steps and the answer
input θoutput cos θ01π/6√3/2π/4√2/2π/31/2π/20↑ solve: output given, read every input above it
Reference angle on the special-angle table: 32 in the cosine row sits under π6.
  1. Reference angle: which angle from 0 to π2 has cosine 32? It is π6.The point at π6 is (32, 12), and the cosine is its x-coordinate, 32. It is not π3: sin π3 is 32, but cos π3 is 12.
  2. Sign: −32 is negative.A negative cosine means a point left of the y-axis.
  3. Quadrant: II.The range covers Quadrants I and II, and only Quadrant II is left of the y-axis.
  4. Angle: π−π6=6π6−π6=5π6.The Quadrant II angle with reference angle r stops r short of a half turn. Writing π as 6π6 gives a common bottom, so the tops subtract: 6π − π = 5π.
Answer
arccos(−32) = 5π6
Double-check The point at 5π6 is the point at π6 mirrored across the y-axis: (−32, 12). So cos 5π6 = −32, the input. And 5π6, which is 150°, lies between 0 and π.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: arccos(−32) = 7π6, because cos 7π6 = −32.
The cosine is right, but 7π6 is more than π: the turn has gone below the x-axis, outside the range [0, π].
✓ Instead: 5π6, the Quadrant II angle with the same cosine.
Tips and tricks
  • An arccos answer is never negative. For a negative input it always lies between π2 and π.

Part 3: The inverse tangent of a negative input

The inverse tangent answers on the right half of the circle, like the inverse sine, but the very top and bottom are left out, because tangent does not exist straight up or straight down. Tangent is the height divided by the left-right distance, and on the right half that distance is positive. So a negative tangent needs a negative height, which means Quadrant IV. The answer is a negative angle: minus the reference angle.

  • Range: (−π2, π2), the right half without its two ends, Quadrants IV and I
  • Every number is allowed as an input
  • Input 0 or positive: the answer is r, in Quadrant I or on its edge
  • Input negative: the answer is −r, in Quadrant IV
  • In symbols: arctan(−x) = −arctan x
x = cos θy = sin θ−π/4
At −π4 the point is (22, −22): height divided by x is −1.

Worked example

Arctan(−1)

Find arctan(−1). In plain words: find the angle strictly between −π2 and π2 whose tangent is −1.

Show the steps and the answer
input θoutput tan θ00π/6√3/3π/41π/3√3π/2undefined↑ solve: output given, read every input above it
Reference angle on the special-angle table: 1 in the tangent row sits under π4. Tangent has no value at π2.
  1. Reference angle: which angle from 0 to π2 has tangent 1? It is π4.At π4 the point is (22, 22). Tangent is y ÷ x, and a number divided by itself is 1. So r = π4.
  2. Sign: −1 is negative.On the right half, a negative tangent means a negative height.
  3. Quadrant: IV.The range covers Quadrants I and IV. Tangent is positive in Quadrant I and negative in Quadrant IV.
  4. Angle: −π4.Turning r = π4 clockwise reaches Quadrant IV inside the range, and a clockwise turn is a negative angle.
Answer
arctan(−1) = −π4
Double-check At −π4 the point is (22, −22). Tangent = y ÷ x = −22 ÷ 22 = −1, the input. And −π4, which is −45°, lies strictly between −π2 and π2.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: arctan(−1) = 3π4, because tan 3π4 = −1.
Tangent is negative in Quadrant II too, but 3π4 is past π2, outside the range (−π2, π2).
✓ Instead: −π4: the same tangent, and inside the range.
Tips and tricks
  • arctan follows the same sign rule as arcsin. The difference: arctan never equals −π2 or π2, because tangent does not exist there.

5 How

  1. Name the reference angle: cover any minus sign and find the special angle from 0 to π2 whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
  2. Read the sign of the input: zero, positive or negative.
  3. Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−π2) for arcsin, the left end (π) for arccos.
  4. Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: −π2 for arcsin(−1), π for arccos(−1).
  5. Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.

The four-step method for an exact inverse value

1
Is it arcsin or arccos, with an input below −1 or above 1?
YesStop: there is no answer, because a sine or cosine is never past 1 in size.
NoGo on.
↓
2
Does the input have a root in the bottom, such as −12?
YesRationalize first: 12 = 22. Then go on.
NoGo on.
↓
3
With the minus sign covered, is the input a special value of this function? For sine or cosine those are 0, 12, 22, 32 and 1. For tangent they are 0, 33, 1 and 3.
YesIts special angle from 0 to π2 is the reference angle r. Go on.
NoNo special angle fits, so this method gives no exact answer.
↓
4
Is the input negative?
YesGo on to the last question.
NoThe answer is r.
↓
5
Is the function arccos?
YesThe answer is π − r: in Quadrant II, or at the left end, π, when the input is −1.
NoIt is arcsin or arctan, so the answer is −r: in Quadrant IV, or straight down, −π2, for arcsin(−1).
  1. Name the reference angle. First say what is asked: arcsin x is the angle in [−π2, π2] whose sine is x, arccos x is the angle in [0, π] whose cosine is x, and arctan x is the angle in (−π2, π2) whose tangent is x. Then cover the minus sign and find the special angle r, from 0 to π2, in that function's row.
  2. Read the sign of the input.
  3. Pick the side the range allows: Quadrant I or its edge for a zero or positive input; Quadrant IV for a negative input to arcsin or arctan, or straight down for arcsin(−1); Quadrant II for a negative input to arccos, or the left end for arccos(−1).
  4. Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: −π2 for arcsin(−1), π for arccos(−1).
  5. Check: evaluate the trig function of your answer and see the input come back with its sign, then confirm the answer is inside the range.

6 Worked example

Worked example

Same input, two functions: arcsin(−22) and arccos(−22)

Find the exact values of arcsin(−22) and arccos(−22). In plain words: the input is −22 both times. First find the angle in [−π2, π2] whose sine is −22. Then find the angle in [0, π] whose cosine is −22.

Show the steps and the answer
x = cos θy = sin θ−π/4
The arcsin answer: the point below the x-axis on the right half.
x = cos θy = sin θ3π/4
The arccos answer: the point left of the y-axis on the top half.
  1. Reference angle, for both: cover the minus sign and find the angle from 0 to π2 whose sine is 22, and the one whose cosine is 22.At π4 the point on the unit circle is (22, 22). Its height (the sine) and its x-coordinate (the cosine) are both 22, so the reference angle is r = π4 for both questions.
  2. Sign, for both: the input −22 is negative.The minus sign is what moves each answer out of Quadrant I.
  3. arcsin, quadrant: pick Quadrant IV.The range [−π2, π2] is the right half of the circle, Quadrants IV and I. Sine is the height, and the height is negative only in Quadrant IV of those two.
  4. arcsin, angle: write −π4.Inside the range, Quadrant IV is reached by turning r clockwise, and a clockwise turn is a negative angle.
  5. arccos, quadrant: pick Quadrant II.The range [0, π] is the top half of the circle, Quadrants I and II. Cosine is the x-coordinate, and x is negative only in Quadrant II of those two.
  6. arccos, angle: write π−π4=4π4−π4=3π4.The Quadrant II angle with reference angle r stops r short of a half turn, so it is π − r. Writing π as 4π4 gives both fractions the bottom 4, and then the tops subtract: 4π − π = 3π.
Answer
  • arcsin(−22) = −π4
  • arccos(−22) = 3π4
Double-check Evaluate each answer. The point at −π4 is (22, −22), so sin(−π4) = −22, the input, and −π4 lies in [−π2, π2]. The point at 3π4 is (−22, 22), so cos 3π4 = −22, the input, and 3π4 lies in [0, π]. In degrees the answers are −45° and 180° − 45° = 135°. Same input, two different angles, each inside its own range.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

Rung 1: a positive input

Find arccos(32). In plain words: find the angle in [0, π] whose cosine is 32.

Show the steps and the answer
input θoutput cos θ01π/6√3/2π/4√2/2π/31/2π/20↑ solve: output given, read every input above it
Find 32 in the cosine row. The arrow points up to its angle, π6.
  1. Reference angle: in the cosine row, cosπ6=32, so r=π6.The point at π6 is (32, 12), and cosine is the x-coordinate. Use the cosine row, not the sine row: sin π3 is also 32, but that is a sine.
  2. Sign: positive.There is no minus sign in front of 32.
  3. Quadrant: I.Quadrant I is inside all three ranges, and both coordinates are positive there.
  4. Angle: π6.In Quadrant I the answer is the reference angle itself.
Answer
arccos(32) = π6
Double-check cos π6 is the x-coordinate of (32, 12), which is 32, the input. And π6 lies in [0, π].

Rung 2 of 7

Rung 2: an input of zero

Find arcsin(0) and arccos(0). In plain words: find the angle in [−π2, π2] whose sine is 0, then the angle in [0, π] whose cosine is 0.

Show the steps and the answer
x = cos θy = sin θπ/2
Straight up, the point (0, 1) has cosine 0, so arccos(0) = π2.
  1. arcsin(0), reference angle: the angle from 0 to π2 with sine 0 is 0.At angle 0 the point is (1, 0), and its height is 0.
  2. arcsin(0), sign and angle: zero is not negative, so the answer is r=0.Only a negative input moves the answer out of Quadrant I and its edges.
  3. arccos(0), reference angle: the angle from 0 to π2 with cosine 0 is π2.At π2 the point is (0, 1), straight up, and its x-coordinate is 0.
  4. arccos(0), sign and angle: zero is not negative, so the answer is r=π2.The same rule: no minus sign, so no move away from the reference angle.
Answer
  • arcsin(0) = 0
  • arccos(0) = π2
Double-check sin 0 = 0, and 0 is in [−π2, π2]. cos π2 = 0, and π2 is in [0, π]. The gotcha: arccos(0) is not 0, because cos 0 = 1.

Rung 3 of 7

Rung 3: a negative input for the inverse tangent

Find arctan(−33). In plain words: find the angle strictly between −π2 and π2 whose tangent is −33.

Show the steps and the answer
x = cos θy = sin θ−π/6
At −π6 the height is negative and x is positive, so the tangent is negative.
  1. Reference angle: the angle from 0 to π2 with tangent 33 is π6.At π6 the point is (32, 12). Tangent is y ÷ x = 12 ÷ 32 = 12 · 23 = 13, and multiplying top and bottom by 3 gives 33.
  2. Sign: negative.The input has a minus sign in front.
  3. Quadrant: IV.arctan answers on the right half, Quadrants I and IV, and tangent is negative only in Quadrant IV of those two.
  4. Angle: −π6.A clockwise turn of r reaches Quadrant IV inside the range, and clockwise is negative.
Answer
arctan(−33) = −π6
Double-check At −π6 the point is (32, −12). Tangent = −12 ÷ 32 = −13 = −33, the input. And −π6 lies strictly between −π2 and π2.

Rung 4 of 7

Rung 4: answers at the ends of the range

Find arcsin(−1) and arccos(−1). In plain words: find the angle in [−π2, π2] whose sine is −1, then the angle in [0, π] whose cosine is −1.

Show the steps and the answer
x = cos θy = sin θ−π/2
Straight down: height −1.
x = cos θy = sin θπ
The left end: x-coordinate −1.
  1. arcsin(−1), reference angle: the angle from 0 to π2 with sine 1 is π2.At π2 the point is (0, 1), straight up, with height 1.
  2. arcsin(−1), sign and angle: negative, so the answer is −r=−π2.For arcsin a negative input means a clockwise turn. Turning π2 clockwise points straight down, the bottom end of the range.
  3. arccos(−1), reference angle: the angle from 0 to π2 with cosine 1 is 0.At 0 the point is (1, 0), with x-coordinate 1.
  4. arccos(−1), sign and angle: negative, so the answer is π−r=π−0=π.For arccos a negative input means mirroring across the y-axis: (1, 0) mirrors to (−1, 0), which sits at a half turn, π.
Answer
  • arcsin(−1) = −π2
  • arccos(−1) = π
Double-check At −π2 the point is (0, −1), so sin(−π2) = −1, and −π2 is the bottom end of [−π2, π2], included because of the square bracket. At π the point is (−1, 0), so cos π = −1, and π is the top end of [0, π], also included. The gotcha: these answers sit on an axis, not inside a quadrant, and the four steps still work.

Rung 5 of 7

Rung 5: an input that is not allowed

Find arccos(−3), if it exists. In plain words: is there an angle in [0, π] whose cosine is −3?

Show the steps and the answer
lowest: −1rangeπ/2π3π/22π−2−112
Every cosine lies in the shaded band from −1 to 1. The input −3, about −1.73, is below the band.
  1. Size of the input: 3 is about 1.73, so −3 is about −1.73.1.7 × 1.7 = 2.89 and 1.8 × 1.8 = 3.24, so the number that squares to 3 sits between 1.7 and 1.8.
  2. Allowed inputs: arccos accepts only numbers from −1 to 1.Cosine is the x-coordinate of a point on a circle of radius 1, so it is never below −1. About −1.73 is below −1.
  3. Stop: arccos(−3) does not exist.No angle has cosine −3, so the reference angle step has nothing to find: no special angle has cosine 3.
  4. Name the trap: 3 belongs to the tangent row, since tanπ3=3. So arctan(−3)=−π3 does exist.arctan accepts every number and arccos does not. Borrowing a value from the wrong row is how arccos(−3) gets a fake answer.
Answer
arccos(−3) does not exist (it is undefined): no angle has a cosine below −1.
Double-check Try the tempting answers: cos 2π3 = −12, and cos 5π6 = −32, which is about −0.87. Neither is −3. No angle can do better, because the leftmost point of the unit circle, (−1, 0), has the smallest cosine, −1.

Rung 6 of 7

Rung 6: inverse notation and an input in disguise

Find cos⁻¹(−12). In plain words: the input is −12. Find the angle in [0, π] whose cosine is that number.

Show the steps and the answer

12=1·22·2=22

cos⁻¹(−12)=cos⁻¹(−22)

=π−π4=3π4

  1. Notation: cos−1 means arccos.The −1 written up high means the inverse function, as with sin⁻¹. It does not mean 1 divided by cosine.
  2. Clear the root from the bottom: 12=1·22·2=22.Multiplying the top and the bottom by the same number leaves a fraction's value unchanged, and 2 · 2 = 2. The input is −22, a special value in disguise.
  3. Reference angle: cosπ4=22, so r=π4.The point at π4 is (22, 22).
  4. Sign and quadrant: negative, so Quadrant II.arccos answers on the top half, and a negative cosine puts the point on its left part, Quadrant II.
  5. Angle: π−π4=4π4−π4=3π4.The Quadrant II angle with reference angle r is π − r, and π = 4π4 gives a common bottom.
Answer
cos⁻¹(−12)=3π4
Double-check The point at 3π4 is (−22, 22), so cos 3π4 = −22, which equals −12, the input. In degrees 3π4 is 135°, between 0° and 180°.

Rung 7 of 7

Rung 7: the hardest kind, two inverses in one expression

Find the exact value of arccos(−12) − arcsin(−12). In plain words: find each angle on its own with the four steps, then subtract the second angle from the first.

Show the steps and the answer
x = cos θy = sin θ2π/3
arccos(−12): left of the y-axis on the top half.
x = cos θy = sin θ−π/6
arcsin(−12): below the x-axis on the right half.
  1. arccos(−12), reference angle: cosπ3=12, so r=π3.The point at π3 is (12, 32), and cosine is the x-coordinate.
  2. arccos(−12), sign, quadrant and angle: negative, so Quadrant II, and π−π3=3π3−π3=2π3.arccos answers on the top half, and a negative cosine means its left part.
  3. arcsin(−12), reference angle: sinπ6=12, so r=π6.The point at π6 is (32, 12), and sine is the height. The two reference angles differ because they come from different rows.
  4. arcsin(−12), sign, quadrant and angle: negative, so Quadrant IV, and the answer is −π6.arcsin answers on the right half, and a negative height means its lower part, reached by a clockwise turn.
  5. Subtract: 2π3−(−π6)=2π3+π6.Subtracting a negative number adds its positive, the way 5 − (−2) = 7.
  6. Add with a common bottom: 2π3=4π6, so 4π6+π6=5π6.Fractions add only when their bottoms match. Multiplying the top and bottom of 2π3 by 2 turns thirds into sixths.
Answer
arccos(−12) − arcsin(−12) = 5π6
Double-check Each angle: the point at 2π3 is (−12, 32), so cos 2π3 = −12. The point at −π6 is (32, −12), so sin(−π6) = −12. The arithmetic in degrees: 120° − (−30°) = 150°, and 5π6 is 150° because π6 is 30°.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Using the cosine move for sine: arcsin(−32) = π − π3 = 2π3.
Mirroring across the y-axis keeps the height, so sin 2π3 = +32: the sign never changed. And 2π3 is outside [−π2, π2].
✓ Instead: For a negative sine, turn clockwise: arcsin(−32) = −π3, and sin(−π3) = −32.
✗ Not this: Using the sine move for cosine: arccos(−22) = −π4.
Turning clockwise keeps the x-coordinate, so cos(−π4) = +22, not −22. And an arccos answer is never negative, since its range is [0, π].
✓ Instead: For a negative cosine, take the angle away from π: π − π4 = 3π4, and cos 3π4 = −22.
✗ Not this: Reading the wrong row: arccos(12) = π6.
It is sin π6 that equals 12. cos π6 is 32.
✓ Instead: cos π3 = 12, so arccos(12) = π3. Take the reference angle from the row of the function you are undoing.
✗ Not this: Running the four steps on arcsin(−0.3).
0.3 is not a special value: no special angle has sine 0.3, so the reference angle step has nothing exact to name.
✓ Instead: The answer exists, and the sign rule still says it is a negative angle between −π2 and 0. Finding its size needs a calculator, which a later lesson covers.

Tips and tricks

  • Memory device: cosine on top, sine and tangent on the right. Every arccos answer is on the top half of the circle, from 0 to π. Every arcsin and arctan answer is on the right half, from −π2 to π2.
  • Memory device for a negative input: sine and tangent turn clockwise, cosine turns past straight up. arcsin and arctan give −r. arccos gives π − r, which is more than π2.
  • No inverse ever answers in Quadrant III, because none of the three ranges reaches it. An answer such as 7π6 or 5π4 is always wrong.
  • Check every answer twice: take the sine, cosine or tangent of your angle and see the input come back with its sign, then confirm the angle is inside the range. An answer that passes only the first check is the most common slip.
  • On paper, write the four steps as one line, for example: r = π4, negative, arccos, Quadrant II, π − π4 = 3π4. Each decision is visible, so a slip is quick to spot.
  • If the input has a root in the bottom, such as −13, rationalize it first so it matches a value in the special-angle table: 13 = 33.

7 The trap

The most common slip here is the right point with the wrong name. For arcsin(−22) many people write 7π4, because the unit circle they learned runs from 0 to 2π. The point is right, but 7π4 is not between −π2 and π2, so it is not the principal value. Name the same point by turning clockwise: −π4. And 5π4, in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.

Flash cards

Say the answer out loud, then flip.

Like a taxi address, an exact inverse value has two parts. What are they?
  • How far: the reference angle r, the angle from 0 to π2 whose sine, cosine or tangent equals the input with its minus sign covered.
  • Which side: the quadrant, picked by the sign of the input, but only inside that function's range; the inputs 0, 1 and −1 (for arctan, only 0) land on an axis instead.
For arcsin or arctan, where does a negative input land, and what angle do you write?
  • Below the x-axis, in Quadrant IV or on its edge, because their range is the right half of the circle.
  • Write −r. For example, arctan(−3) = −π3, since tan π3 = 3.
For arccos, where does a negative input land, and what angle do you write?
  • Left of the y-axis, in Quadrant II or on its edge, because its range is the top half of the circle.
  • Write π − r. For example, arccos(−12) = π − π3 = 2π3, since cos π3 = 12.
Why is 11π6 the wrong answer for arcsin(−12)?
  • It names the right point, but it is outside the arcsin range, −π2 to π2, so it is not the principal value.
  • Name the same point by turning clockwise: −π6.

Lesson 6 of 8

A function and its inverse undo each other, with conditions

Subject: MathematicsLeans on: Sine and cosine on the unit circleLeans on: Tangent on the unit circleLeans on: Comparing fractions of πLeans on: Subtracting from πLeans on: Full turnsLeans on: Reference anglesLeans on: Signs by quadrantLeans on: The three rangesLeans on: The four-step methodLeans on: Square and round bracketsOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Picture a Ferris wheel of radius 1 turning counterclockwise. Your seat's height above the center is the sine of your angle. A helper hears only your height and must name your seat. Most heights belong to two seats, one on the rising right half and one on the falling left half, so the helper has a fixed rule: always name the seat on the right half. Turn by an angle from −π2 to π2, which puts you on the right half, and the helper names your seat by that very angle, so you get your angle back. Ride an extra lap first, as with 13π6, and the helper still names your seat, but by its first-lap angle, π6. Sit on the left half and the helper names a different seat at the same height. Starting from a height always works, as long as the wheel reaches it: the seat the helper names sits at that very height.

2 Picture it

5π/6sinarcsinfirstsecond1/2π/6
5π6 goes in, sine turns it into 12, and arcsin turns 12 into π6, not back into 5π6.

Reminder

Reminder: Sine and cosine on the unit circle, Tangent on the unit circle, Comparing fractions of π, Subtracting from π, Full turns, Reference angles, Signs by quadrant, The three ranges, The four-step method, Square and round brackets
  • Sine and cosine on the unit circle. The point for an angle has x = cosine and y = sine. The point for 5π6 is (−32, 12), so cos(5π6) = −32 and sin(5π6) = 12.
  • Tangent on the unit circle. Tangent is y ÷ x for the point: for π4, 22 ÷ 22 = 1.
  • Comparing fractions of π. Give them the same bottom, then compare the tops: π2 = 3π6, and 5 > 3, so 5π6 > π2.
  • Subtracting from π. Write π with the same bottom first: π − 5π6 = 6π6 − 5π6 = π6.
  • Full turns. Adding or subtracting 2π, one full turn, lands on the same point, so sine and cosine do not change: 13π6 − 2π = 13π6 − 12π6 = π6.
  • Reference angles. The angle back to the nearest side of the x-axis. First swap θ for β, the angle from 0 up to 2π that ends at the same point. The reference angle is then β in Quadrant I, π − β in Quadrant II, β − π in Quadrant III and 2π − β in Quadrant IV, and 0 or π2 when β lies on an axis. For 7π4: 2π − 7π4 = π4. For −π6: β = 11π6, so the reference angle is 2π − 11π6 = π6.
  • Signs by quadrant. All Silver Tea Cups: all three are positive in Quadrant I, only sine in II, only tangent in III, only cosine in IV. So sin(4π3), in Quadrant III, is negative.
  • The three ranges. arcsin answers in [−π2, π2], arccos in [0, π], arctan in (−π2, π2). For example arccos(−1) = π is allowed, because the bracket at π is square.
  • The four-step method. Reference angle, sign of the input, the quadrant the range allows, write the angle. arcsin(−12): reference angle π6, negative input, the part of the range below 0, so −π6.
  • Square and round brackets. A square bracket includes the end and a round one leaves it out: 1 is in [−1, 1], but π2 is not in (−π2, π2).

3 Why

arcsin x is, by definition, an angle whose sine is x. Take the sine of that angle and you must get x back: that is what the angle was chosen for. The only condition is that arcsin x exists, which needs x in [−1, 1], since every height on the unit circle is between −1 and 1. The other order loses information. Sine gives the same number for many angles, such as π6 and 5π6, and arcsin answers with only one of them, the principal value in [−π2, π2]. So arcsin(sin x) equals x only when x already lies in that interval.

4 The rule

sin(arcsin x) =x for x in [−1,1] (undefined for other x); arcsin(sinx)=x for x in [−π2,π2], and for any other x it is the angle in [−π2,π2] with the same sine.

cos(arccos x) =x for x in [−1,1] (undefined for other x); arccos(cosx)=x for x in [0,π], and for any other x it is the angle in [0,π] with the same cosine.

The same idea, five ways

Say it

The sine of the arcsine of x is x, for x from negative 1 to 1. The arcsine of the sine of x is x only when x is from negative pi over 2 to pi over 2.

Write it

Sine undoes its inverse function, arcsin, for every number arcsin accepts, but arcsin undoes sine only for angles in its own range; for any other angle it returns the angle in that range with the same sine.

In math
  • sin(arcsin x) = x when −1 ≤ x ≤ 1
  • arcsin(sin x) = x when −π2 ≤ x ≤ π2
  • Interval: arcsin(sin x) = x for x in [−π2, π2]
  • Set-builder: arcsin(sin x) = x on {x | −π2 ≤ x ≤ π2}
  • Other notation: sin(sin⁻¹ x) = x on [−1, 1] and sin⁻¹(sin x) = x on [−π2, π2]
  • Cosine: cos(arccos x) = x on [−1, 1]; arccos(cos x) = x on [0, π]
Like

A round trip through a translator: Spanish to English and back always returns your word, but English to Spanish and back can turn 'large' into 'big'.

See it
1/2arcsinsinfirstsecondπ/61/2
Starting from a number works: 12 goes to π6 and comes back as 12.

The same idea, other ways

As a picture

Draw the unit circle. arcsin answers only on its right half: from the bottom point, −π2, up through the rightmost point, 0, to the top point, π2. Every height from −1 to 1 appears exactly once on that half. An angle from −π2 to π2 survives the round trip arcsin(sin x). An angle on the left half, such as 5π6, comes back as the angle of its mirror point across the y-axis, π6: the point on the right half at the same height. For arccos the allowed half is the top half, from 0 to π, and the mirror is across the x-axis.

arcsin answers here
The sweep from −π2 at the bottom to π2 at the top covers the right half of the circle.
As a story

Translate the English word 'large' into Spanish and you get 'grande'. Translate 'grande' back and the dictionary gives its first entry, 'big'. Several English words share that one Spanish word, so the trip back cannot know which one you meant and hands back the standard one. Sine works the same way: π6, 5π6 and 13π6 all have sine 12, and arcsin hands back the standard angle, the principal value π6. Start on the Spanish side and the trip always works: 'grande' becomes 'big' and comes back as 'grande', the way sin(arcsin(12)) = 12.

With small numbers

The table sends four angles whose sine is 12 through sine and then arcsin. Every column ends at π6, so only the column that started at π6 came back to where it began: π6 is the only one of the four inside [−π2, π2]. Now start from numbers instead: sin(arcsin 0.3) = 0.3 and sin(arcsin(−1)) = sin(−π2) = −1. Every number from −1 to 1 comes back unchanged.

input θoutput arcsin(sin θ)π/6π/65π/6π/613π/6π/6−7π/6π/6↑ solve: output given, read every input above it
Four different angles, one output: every angle whose sine is 12 comes out of arcsin as π6.
Why it must be true

arcsin was built as the inverse function of sine on the restricted domain [−π2, π2]. There sine is a one-to-one function: it passes the horizontal line test, so each height comes from exactly one angle. An inverse function undoes its function on exactly those inputs, so arcsin(sin x) = x for every x in [−π2, π2]. For any other x, the output still has to lie in the range [−π2, π2], so it cannot be x. In the other order, every number in [−1, 1] is a legal input to arcsin, and arcsin x is by definition an angle with sine x, so sin(arcsin x) = x for all of them.

Rule of thumb

Outside trig, trust; outside inverse, test. When sin, cos or tan is on the outside, trust the cancel, as long as the number inside is one the inverse accepts. When arcsin, arccos or arctan is on the outside, first test the angle against that inverse's range. Pass, and the answer is the angle. Fail, and the answer is the angle in the range with the same sine, cosine or tangent, provided the inside has a value at all: tan x has none when x is an odd multiple of π2.

Outside trig, trust: sin(arcsin x) = x for x in [−1, 1]

Outside inverse, test: arcsin(sin x) = x for x in [−π/2, π/2]

Test failed: if the inside value exists, the angle in the range with that value

PairTrig on the outsideTrue forInverse on the outsideTrue for
sine and inverse sinesin(arcsin x) = xx in [−1, 1]arcsin(sin x) = xx in [−π2, π2]
cosine and inverse cosinecos(arccos x) = xx in [−1, 1]arccos(cos x) = xx in [0, π]
tangent and inverse tangenttan(arctan x) = xevery real xarctan(tan x) = xx in (−π2, π2)

Part 1: Sine and the inverse sine (arcsin)

Sine on the outside: arcsin x is an angle whose sine is x, so the sine of that angle is x again. That works for every x from −1 to 1; past them no such angle exists, and sin(arcsin x) is undefined. Inverse sine on the outside: arcsin answers only on the right half of the unit circle, with angles from −π2 at the bottom to π2 at the top. If your angle ends at a point on the right half, arcsin gives the angle in that range that ends at the same point, which is your angle itself when it was already in the range. If your angle ends on the left half, arcsin gives the angle of the mirror point across the y-axis, at the same height.

  • sin(arcsin x) = x for every x in [−1, 1]
  • sin(arcsin x) is undefined when x < −1 or x > 1
  • arcsin(sin x) = x for every x in [−π2, π2]
  • Any other x: arcsin(sin x) is the angle in [−π2, π2] with the same sine as x
  • Mirror: the points for θ and π − θ are mirror images across the y-axis, so sin(π − θ) = sin θ
x = cos θy = sin θ−π/4
arcsin(−22) names this point, −π4, on the right half; its height is −22, the number you started with.

Worked example

Sine on the outside: sin(arcsin(−22))

Find sin(arcsin(−22)).

Show the steps and the answer
  1. Say what it asks: find the angle whose sine is −22, then take the sine of that angle.arcsin is inside, so it acts first, and sine acts on its answer.
  2. Test the number: 2<2, so 22 is less than 1, and −22 lies between −1 and 0, inside [−1,1].Sine on the outside gives back the number whenever arcsin of it exists, and arcsin accepts exactly the numbers from −1 to 1.
  3. Cancel: sin(arcsin(−22)) =−22.arcsin(−22) is an angle whose sine is −22, so its sine is −22.
Answer
−22
Double-check Work from the inside: arcsin(−22) has reference angle π4 and a negative input, so it is −π4. The point for −π4 is (22, −22), so sin(−π4) = −22, the same answer.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: arcsin(sin(13π6)) = 13π6, because arcsin and sine cancel.
13π6 is more than a full turn, far past π2, so it is outside the range, and arcsin never answers outside [−π2, π2].
✓ Instead: 13π6 − 2π = 13π6 − 12π6 = π6 ends at the same point, and π6 is in the range, so arcsin(sin(13π6)) = π6.
Tips and tricks
  • The number inside sin(arcsin x) does not have to be a special value: sin(arcsin 0.37) = 0.37, and you never need the angle.

Part 2: Cosine and the inverse cosine (arccos)

Cosine is the left-right position of the point on the unit circle, its x. Cosine on the outside: arccos x is an angle whose cosine is x, so cos(arccos x) = x for every x from −1 to 1, and it is undefined past them. Inverse cosine on the outside: arccos answers only on the top half of the circle, from 0 at the right end, over the top, to π at the left end. Every x from −1 to 1 appears exactly once on that half. If your angle ends on the top half, arccos gives the angle in [0, π] that ends at that same point, your angle itself when it was already in [0, π]. If it ends on the bottom half, such as 7π4, arccos gives the angle of the mirror point across the x-axis, which has the same x.

  • cos(arccos x) = x for every x in [−1, 1]; undefined for other x
  • arccos(cos x) = x for every x in [0, π]
  • Any other x: arccos(cos x) is the angle in [0, π] with the same cosine as x
  • Mirror: the points for θ and −θ are mirror images across the x-axis, so cos(−θ) = cos θ
  • A negative angle never comes out of arccos, because arccos never answers below 0
arccos answers here
The sweep from 0 at the right end to π at the left end covers the top half.

Worked example

An angle on the bottom half: arccos(cos(7π4))

Find the exact value of arccos(cos(7π4)).

Show the steps and the answer
x = cos θy = sin θ7π/4
The point for 7π4 is (22, −22): x = 22, on the bottom half, where arccos never answers.
x = cos θy = sin θπ/4
The point for π4 is (22, 22): the same x on the top half, so this is the angle arccos names.
  1. Say what it asks: take the cosine of 7π4, then find the angle in [0,π] whose cosine is that number.The outside function is arccos, and arccos answers only with angles from 0 to π.
  2. Test the angle: π=4π4, and 7π4>4π4, so 7π4 is outside [0,π].With the same bottom, compare the tops: 7 > 4. The test fails, so arccos and cosine may not be canceled.
  3. Find the inside value. 7π4 is in Quadrant IV, its reference angle is 2π−7π4=8π4−7π4=π4, and cosine is positive there, so cos(7π4)=cos(π4)=22.7π4 lies between 3π2 = 6π4 and 2π = 8π4, which is Quadrant IV. There the point is right of the y-axis, so its x, the cosine, is positive.
  4. Replace the inside by its value: arccos(cos(7π4))= arccos(22).What remains is an inverse cosine of a special value.
  5. Find arccos(22): the reference angle is π4, because cos(π4)=22; the input is positive, so the answer is in Quadrant I; the angle is π4.arccos answers a positive input with an angle between 0 and π2.
Answer
π4
Double-check Second way, by the mirror: 7π4 − 2π = 7π4 − 8π4 = −π4 ends at the same point, and the mirror of that point across the x-axis is the point for π4, with the same x, on the top half. Evaluating the answer confirms it: cos(π4) = 22 = cos(7π4), and 0 ≤ π4 ≤ π.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: arccos(cos(7π4)) = −π4, because 7π4 and −π4 end at the same point.
They do end at the same point, a full turn apart, but −π4 is negative, and arccos answers only from 0 to π.
✓ Instead: The angle in [0, π] with the same cosine is the mirror angle across the x-axis, π4.
Tips and tricks
  • Think 'arccos lives on the top half': an answer from arccos that is negative or larger than π is always a mistake.

Part 3: Tangent and the inverse tangent (arctan)

Tangent is the height divided by the left-right position, y ÷ x, for the point on the unit circle. Tangent on the outside: arctan accepts every real number, so tan(arctan x) = x for every x, with no condition at all. Inverse tangent on the outside: arctan answers only with angles strictly between −π2 and π2, the right half without its top and bottom points. If your angle ends on the right half, arctan gives the angle in the range that ends at that same point. If it ends on the left half, arctan gives the angle of the opposite point, half a turn away: a half turn flips the sign of both x and y, so y ÷ x stays the same.

  • tan(arctan x) = x for every real number x
  • arctan(tan x) = x for every x in (−π2, π2)
  • Any other x where tan x exists: arctan(tan x) is the angle in (−π2, π2) with the same tangent as x
  • Half turn: the points for θ and θ − π are opposite each other, so tan(θ − π) = tan θ
  • tan(π2) does not exist, because x = 0 at the top of the circle, so arctan(tan(π2)) is undefined
x = cos θy = sin θ3π/4
The point for 3π4 is (−22, 22): equal lengths with opposite signs, so its tangent is −1.

Worked example

An angle on the left half: arctan(tan(3π4))

Find the exact value of arctan(tan(3π4)).

Show the steps and the answer
x = cos θy = sin θ−π/4
The point for −π4 is directly opposite the point for 3π4: both signs flip, so the tangent is still −1.
  1. Say what it asks: take the tangent of 3π4, then find the angle in (−π2,π2) whose tangent is that number.The outside function is arctan, and arctan answers only with angles strictly between −π2 and π2.
  2. Test the angle: π2=2π4, and 3π4>2π4, so 3π4 is outside the range.With the same bottom, compare the tops: 3 > 2. The test fails, so arctan and tangent may not be canceled.
  3. Find the inside value: the point for 3π4 is (−22,22), so tan(3π4)=22÷(−22)=−1.Tangent is y ÷ x, and a number divided by its own negative is −1.
  4. Replace the inside by its value: arctan(tan(3π4))= arctan(−1).What remains is an inverse tangent of a special value.
  5. Find arctan(−1): the reference angle is π4, because tan(π4)=1; the input is negative, so the answer is in the part of the range below 0; the angle is −π4.arctan answers a negative input with a negative angle, between −π2 and 0.
Answer
−π4
Double-check Second way, by the half turn: 3π4 − π = 3π4 − 4π4 = −π4, the opposite point, so its tangent is the same. Evaluating the answer confirms it: the point for −π4 is (22, −22), so tan(−π4) = (−22) ÷ 22 = −1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: arctan(tan(3π4)) = 3π4, because arctan and tangent cancel.
3π4 is past π2 = 2π4, outside (−π2, π2), and arctan never answers outside that interval.
✓ Instead: tan(3π4) = −1, and arctan(−1) = −π4.
Tips and tricks
  • tan(arctan x) never fails, whatever the number: tan(arctan 50) = 50.

5 How

  1. Say what the problem asks, reading from the inside out: arcsin(sin θ) means 'take the sine of θ, then find the angle in [−π2, π2] with that sine'.
  2. Name the outside function; it decides the test. A trig function outside needs the number inside to be one its inverse accepts: from −1 to 1 for sin and cos, any number for tan. An inverse outside needs the angle inside to lie in its range: [−π2, π2] for arcsin, [0, π] for arccos, (−π2, π2) for arctan.
  3. If the test passes, the two undo each other, and the answer is the number or angle you started with.
  4. If a trig function is outside and the test fails, the inverse does not exist there: write undefined.
  5. If an inverse is outside and the test fails, do not cancel. First make sure the inside value exists: tan(π2) does not, so arctan(tan(π2)) is undefined. Then find the inside value exactly from the unit circle, then find the angle in the range with that value by the four-step method of the last lesson.
  6. Check: with an inverse outside, the answer lies in that inverse's range, and its sine, cosine or tangent equals the inside value; with sin, cos or tan outside, the answer is the number inside the inverse, which that inverse had to accept.

Evaluating a trig function and its inverse stacked together

1
Is sin, cos or tan on the outside, as in sin(arcsin x)?
YesIs x in [−1, 1]? (For tan(arctan x), every x passes.) If yes, the answer is x. If no, the inverse does not exist there: write undefined.
NoAn inverse is on the outside, as in arcsin(sin θ). Go to the next question.
↓
2
Is θ in the range of the outside inverse: [−π2, π2] for arcsin, [0, π] for arccos, (−π2, π2) for arctan?
YesThe two undo each other: the answer is θ.
NoDo not cancel. Go to the next question.
↓
3
Does the inside value sin θ, cos θ or tan θ exist?
YesFind it exactly from the unit circle: the reference angle gives its size, the quadrant of θ gives its sign. Go to the next question.
NoOnly tan θ can fail, when the point is at the top or bottom of the circle, such as θ = π2, because there x = 0. The whole expression is undefined.
↓
4
Is the inside value negative?
Yesarcsin and arctan answer with the negative of the reference angle; arccos answers with π minus the reference angle.
NoA positive value gives the reference angle itself: in Quadrant I, except the value 1, which lands on an axis for arcsin (π2) and arccos (0). A value of 0 gives 0 for arcsin and arctan, and π2 for arccos.
↓
5
Does the answer lie in the range, with the right sine, cosine or tangent?
YesDone.
NoRecheck the inside value and its sign, then redo the last step.
  1. Say what it asks, reading from the inside out: the inner function acts first.
  2. Name the outside function and run its test.
  3. If the test passes, the answer is the value you started with.
  4. If the test fails, a trig function outside means undefined; an inverse outside means you first check that the inside value exists (tan has none at π2), then find it exactly, then the angle in the range with that value.
  5. Check: with an inverse outside, the answer lies in its range and has the inside value as its sine, cosine or tangent; with sin, cos or tan outside, the answer equals the number you started with.

6 Worked example

Worked example

An angle outside the range: arcsin(sin(5π6))

Find the exact value of arcsin(sin(5π6)).

Show the steps and the answer
x = cos θy = sin θ5π/6
The point for 5π6 is (−32, 12): height 12, on the left half, where arcsin never answers.
x = cos θy = sin θπ/6
The point for π6 is (32, 12): the same height 12, on the right half, so this is the angle arcsin names.
  1. Say what it asks: take the sine of 5π6, then find the angle in [−π2,π2] whose sine is that number.The inner function acts first. The outside function is arcsin, and arcsin answers only with angles from −π2 to π2.
  2. Test the angle against the range. Give π2 a bottom of 6: π2=3π6. Since 5π6>3π6, the angle 5π6 is outside [−π2,π2].With the same bottom, comparing fractions means comparing tops, and 5 > 3. Had the angle passed, the answer would be 5π6 itself; it failed, so arcsin and sine may not be canceled.
  3. Find the inside value. 5π6 is in Quadrant II, its reference angle is π−5π6=6π6−5π6=π6, and sine is positive there, so sin(5π6)=sin(π6)=12.5π6 lies between π2 = 3π6 and π = 6π6, which is Quadrant II. There the point on the unit circle is above the x-axis, so its height, the sine, is positive.
  4. Replace the inside by its value: arcsin(sin(5π6))= arcsin(12).What remains is a plain inverse sine of a special value, the kind of problem the last lesson solved.
  5. Find arcsin(12) with the four-step method: the reference angle is π6, because sin(π6)=12; the input is positive; so the answer is in Quadrant I, the part of the range from 0 to π2; the angle is π6.arcsin answers a positive input with an angle between 0 and π2, and π6 is that angle.
Answer
π6
Double-check Second way, by the mirror: the points for 5π6 and π6 are mirror images across the y-axis, so they have the same height, 12, and π6 is the one on the right half, where arcsin answers. Evaluating the answer confirms it: sin(π6) = 12 = sin(5π6), and −π2 ≤ π6 ≤ π2.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

Trig outside, an allowed number inside

Find sin(arcsin(25)).

Show the steps and the answer
  1. Say what it asks: find the angle whose sine is 25, then take the sine of that angle.arcsin is inside, so it acts first, and sine acts on its answer.
  2. Test the number: −1≤25≤1, so 25 is in [−1,1].With sine on the outside, the test is whether arcsin accepts the number, and arcsin accepts exactly the numbers from −1 to 1.
  3. Cancel: sin(arcsin(25)) =25.arcsin(25) is an angle whose sine is 25, so its sine is 25. You never need to know which angle it is.
Answer
25
Double-check Second way, by the picture: arcsin(25) names the point on the right half of the unit circle at height 25. The sine of an angle is the height of its point, so the answer is that height, 25.

Rung 2 of 7

Trig outside, a number that is not allowed

Find cos(arccos 3).

Show the steps and the answer
x = cos θy = sin θ0
The point for angle 0 is (1, 0), the farthest right the unit circle reaches; no point has x = 3.
  1. Say what it asks: find the angle whose cosine is 3, then take the cosine of that angle.arccos is inside, so it acts first.
  2. Test the number: 3 > 1, so 3 is not in [−1,1].arccos accepts only numbers from −1 to 1.
  3. Stop and write undefined: arccos 3 does not exist, so cosine has nothing to act on.Cosine is the x of a point on the unit circle, and no point of a circle of radius 1 lies 3 units right of the center.
Answer
Undefined
Double-check Look for the angle anyway: the x values on the unit circle run from −1, at angle π, to 1, at angle 0. 3 is past the right end, so no angle has cosine 3, and the expression has no value.

Rung 3 of 7

Inverse outside, an angle already in the range

Find arcsin(sin(−π6)).

Show the steps and the answer
x = cos θy = sin θ−π/6
The point for −π6 is on the right half, where arcsin answers, so the round trip brings it back.
  1. Say what it asks: take the sine of −π6, then find the angle in [−π2,π2] with that sine.arcsin is on the outside, and arcsin answers only from −π2 to π2.
  2. Test the angle: with a bottom of 6, the range runs from −3π6 to 3π6, and −π6 lies between them.With equal bottoms, compare the tops: −3 ≤ −1 ≤ 3.
  3. Cancel: arcsin(sin(−π6))=−π6.On the restricted domain each sine value belongs to exactly one angle, so arcsin returns the angle you started with.
Answer
−π6
Double-check Work from the inside: −π6 is in Quadrant IV with reference angle π6, and sine is negative there, so sin(−π6) = −12. Then arcsin(−12) has reference angle π6 and a negative input, so it is −π6. Same answer.

Rung 4 of 7

Inverse outside, an angle in Quadrant II

Find arcsin(sin(2π3)).

Show the steps and the answer
x = cos θy = sin θ2π/3
The point for 2π3 is at height 32 on the left half; its mirror on the right half is the point for π3.
  1. Say what it asks: take the sine of 2π3, then find the angle in [−π2,π2] with that sine.arcsin is on the outside, and arcsin answers only from −π2 to π2.
  2. Test the angle: with a bottom of 6, 2π3=4π6 and π2=3π6. Since 4π6>3π6, the angle is outside the range.The test fails, so arcsin and sine may not be canceled.
  3. Find the inside value: 2π3 is in Quadrant II, its reference angle is π−2π3=3π3−2π3=π3, and sine is positive there, so sin(2π3)=32.2π3 = 4π6 lies between π2 = 3π6 and π = 6π6. In Quadrant II the point is above the x-axis, so its height, the sine, is positive.
  4. Finish: arcsin(32) has reference angle π3 and a positive input, so it is the Quadrant I angle π3.This is the four-step method: a positive input puts the answer between 0 and π2.
Answer
π3
Double-check Second way, by the mirror: the point for 2π3 reflected across the y-axis is the point for π − 2π3 = π3, at the same height, on the right half. And sin(π3) = 32, with π3 inside [−π2, π2].

Rung 5 of 7

A negative angle inside arccos

Find arccos(cos(−2π3)).

Show the steps and the answer
x = cos θy = sin θ−2π/3
The point for −2π3 is on the bottom half.
  1. Say what it asks: take the cosine of −2π3, then find the angle in [0,π] with that cosine.arccos is on the outside, and arccos answers only from 0 to π.
  2. Test the angle: −2π3 is negative, and the range starts at 0, so it fails.arccos never answers with a negative angle.
  3. Find the inside value: add a full turn, −2π3+2π=−2π3+6π3=4π3. That angle is in Quadrant III, its reference angle is 4π3−π=4π3−3π3=π3, and cosine is negative there, so cos(−2π3)=−12.Adding 2π, one full turn, lands on the same point, so the cosine is unchanged. 4π3 = 8π6 lies between π = 6π6 and 3π2 = 9π6, which is Quadrant III, where the point is left of the y-axis, so its x, the cosine, is negative.
  4. Finish: arccos(−12) has reference angle π3 and a negative input, so it is in Quadrant II: π−π3=3π3−π3=2π3.arccos answers a negative input with an angle past π2, in Quadrant II, where cosine is negative.
Answer
2π3
Double-check Second way, by the mirror: the point for −2π3 reflected across the x-axis is the point for 2π3, with the same x, on the top half. And cos(2π3) = −12, with 0 ≤ 2π3 ≤ π.

Rung 6 of 7

Arcsin outside, an angle in Quadrant III

Find arcsin(sin(4π3)).

Show the steps and the answer
x = cos θy = sin θ4π/3
The point for 4π3 is at height −32 on the left half; its mirror on the right half is the point for −π3.
  1. Say what it asks: take the sine of 4π3, then find the angle in [−π2,π2] with that sine.arcsin is on the outside, and arcsin answers only from −π2 to π2.
  2. Test the angle: with a bottom of 6, 4π3=8π6 and π2=3π6. Since 8π6>3π6, the angle is outside the range.The test fails, so arcsin and sine may not be canceled.
  3. Find the inside value: 4π3 is in Quadrant III, its reference angle is 4π3−π=4π3−3π3=π3, and sine is negative there, so sin(4π3)=−32.8π6 lies between π = 6π6 and 3π2 = 9π6, which is Quadrant III. There the point is below the x-axis, so its height, the sine, is negative.
  4. Finish: arcsin(−32) has reference angle π3 and a negative input, so it is the angle below 0 in the range: −π3.arcsin answers a negative input with a negative angle, between −π2 and 0.
Answer
−π3
Double-check Second way, by the mirror: the point for 4π3 reflected across the y-axis is the point for π − 4π3 = 3π3 − 4π3 = −π3, at the same height, on the right half. And sin(−π3) = −32, with −π2 ≤ −π3 ≤ π2.

Rung 7 of 7

Arccos outside, an angle in Quadrant III

Find arccos(cos(5π4)).

Show the steps and the answer
x = cos θy = sin θ5π/4
The point for 5π4 is on the bottom half at x = −22.
  1. Say what it asks: take the cosine of 5π4, then find the angle in [0,π] with that cosine.arccos is on the outside, and arccos answers only from 0 to π.
  2. Test the angle: π=4π4, and 5π4>4π4, so the angle is outside [0,π].The test fails, so arccos and cosine may not be canceled.
  3. Find the inside value: 5π4 is in Quadrant III, its reference angle is 5π4−π=5π4−4π4=π4, and cosine is negative there, so cos(5π4)=−22.5π4 lies between π = 4π4 and 3π2 = 6π4, which is Quadrant III. There the point is left of the y-axis, so its x, the cosine, is negative.
  4. Finish: arccos(−22) has reference angle π4 and a negative input, so it is in Quadrant II: π−π4=4π4−π4=3π4.arccos answers a negative input with an angle past π2, in Quadrant II, where cosine is negative.
Answer
3π4
Double-check Second way, by the mirror: 5π4 − 2π = 5π4 − 8π4 = −3π4 ends at the same point, and its mirror across the x-axis is the point for 3π4, with the same x, on the top half. And cos(3π4) = −22, with 0 ≤ 3π4 ≤ π.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: arcsin(sin(5π6)) = 5π6, because arcsin and sine cancel.
arcsin answers only with angles from −π2 to π2, and 5π6 is past π2 = 3π6. No output of arcsin can ever be 5π6.
✓ Instead: Work from the inside: sin(5π6) = 12, and arcsin(12) = π6. The answer is π6.
✗ Not this: sin(arcsin 2) = 2, because sine undoes arcsin.
No angle has sine 2: every point of the unit circle has a height from −1 to 1. So arcsin 2 does not exist, and there is no angle for sine to act on.
✓ Instead: sin(arcsin 2) is undefined. Sine on the outside gives back x only for x in [−1, 1], for example sin(arcsin 0.8) = 0.8.
✗ Not this: arcsin(sin(5π6)) is undefined, because 5π6 is outside the range of arcsin.
The range test decides only whether you may cancel. The expression itself is fine: sin(5π6) = 12 is a number from −1 to 1, which arcsin accepts.
✓ Instead: A failed test means a different angle, not undefined: arcsin(sin(5π6)) = π6. In fact arcsin(sin x) has a value for every angle x, because sin x is always a number from −1 to 1.
✗ Not this: arccos(cos(−π4)) = −π4, because −π4 is between −π2 and π2.
That interval is the range of arcsin. The test always uses the range of the outside function, and arccos answers only from 0 to π, so a negative angle never comes out of it.
✓ Instead: cos(−π4) = 22, and arccos(22) = π4. The answer is π4.

Tips and tricks

  • Memory device: outside trig, trust; outside inverse, test. sin(arcsin x) gives back x whenever x is in [−1, 1]; arcsin(sin x) gives back x only after x passes the range test.
  • The outside function owns the test. In arccos(cos x), compare x with [0, π], the range of arccos, even if x would pass for arcsin.
  • Write the middle step every time: arcsin(sin(5π6)) = arcsin(12) = π6. It shows a reader why you did not cancel, and it lets you catch a slip in the last step.
  • With an inverse on the outside, check the answer twice: it must lie in that inverse's range, and its sine, cosine or tangent must equal the inside value. With sin, cos or tan on the outside, the answer is the number you started with, once the inverse has accepted it.
  • Picture the halves: the right half of the unit circle for arcsin and arctan, the top half for arccos. An answer on the wrong half is wrong.
  • Same angle, different answers: arcsin(sin(5π4)) = −π4, but arccos(cos(5π4)) = 3π4. Always look at which inverse is outside.

7 The trap

Canceling on sight. arcsin and sine look as if they cross out, so it is tempting to write arcsin(sin(5π6)) = 5π6. Before you cancel, test the angle against the range of the outside inverse. 5π6 is past π2 = 3π6, so it fails; work from the inside instead: sin(5π6) = 12, then arcsin(12) = π6.

Flash cards

Say the answer out loud, then flip.

Why can arcsin(sin x) give an angle different from x?
Sine gives the same number for many angles, such as π4 and 3π4. arcsin names only one of them, the principal value in [−π2, π2], so you get x back only when x already lies in that interval.
What is cos(arccos 2)?
  • Undefined.
  • arccos accepts only numbers from −1 to 1, so arccos 2 does not exist.
What is arcsin(sin(−π5))?
  • −π5
  • The angle −π5 lies in [−π2, π2], the range of arcsin, so the two undo each other. You do not need to find sin(−π5).
What is arccos(cos(4π3))?
  • 2π3
  • The angle 4π3 is past π, outside [0, π], so do not cancel. cos(4π3) = −12, and the angle in [0, π] with cosine −12 is 2π3.

Lesson 7 of 8

Mixing the functions with a right triangle

Subject: MathematicsLeans on: The Pythagorean theoremLeans on: Getting a squared letter aloneLeans on: Squaring a square rootLeans on: SOH-CAH-TOALeans on: Special angles on the unit circleLeans on: Signed legs in any quadrantLeans on: Signs by quadrant: All Silver Tea CupsLeans on: Where each inverse answersLeans on: Interval bracketsLeans on: Squaring a negativeLeans on: Square root of a fractionLeans on: Dividing fractionsLeans on: Tangent from sine and cosineLeans on: Sine squared plus cosine squaredLeans on: Partners undo each otherOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Picture a ladder 5 feet long leaning on a wall, its top 3 feet up. How far is its foot from the wall? You never need to measure the angle at the floor. Ladder, wall and floor make a right triangle, and the Pythagorean theorem gives the floor side: 4 feet. The expression cos(arcsin(35)) is the same question written in symbols. The inside, arcsin(35), is an angle with no special name, but it describes its triangle: the side opposite it is 3 (the wall) and the slanted side is 5 (the ladder). The outside, cos, asks for a different ratio of that same triangle: floor over ladder, 45. One more thing: a negative input moves the triangle into another quadrant, where one of its legs counts as negative.

2 Picture it

θ?35
The inside, arcsin(35), gives opposite 3 and hypotenuse 5; the Pythagorean theorem fills in the ?

Reminder

Reminder: The Pythagorean theorem, Getting a squared letter alone, Squaring a square root, SOH-CAH-TOA, Special angles on the unit circle, Signed legs in any quadrant, Signs by quadrant: All Silver Tea Cups, Where each inverse answers, Interval brackets, Squaring a negative, Square root of a fraction, Dividing fractions, Tangent from sine and cosine, Sine squared plus cosine squared, Partners undo each other
  • The Pythagorean theorem. In a right triangle, leg2 + leg2 = hypotenuse2. Missing leg: legs ? and 3, hypotenuse 5, so ?² = 25 − 9 = 16 and ? = 4. Missing hypotenuse: legs 3 and 4, so 9 + 16 = 25 and the hypotenuse is 5.
  • Getting a squared letter alone. In a2 + 9 = 25, subtract 9 from both sides: a2 = 16. Then a = 4, the positive root, because a length is positive.
  • Squaring a square root. Squaring a square root gives back what is inside: (5)2 = 5, because 5 is the positive number whose square is 5.
  • SOH-CAH-TOA. Sine = oppositehypotenuse, cosine = adjacenthypotenuse, tangent = oppositeadjacent. With opposite 3, adjacent 4, hypotenuse 5: sin = 35, cos = 45, tan = 34.
  • Special angles on the unit circle. The point at π6 is (32, 12), at π3 it is (12, 32), and at −π6 it is (32, −12). The across coordinate is the cosine and the height is the sine: cos π3 = 12.
  • Signed legs in any quadrant. For an angle drawn from the positive x-axis, drop a line from the end of its slanted side to the x-axis. The across leg is negative if it points left, the up-down leg is negative if it points down, and the slanted side is always positive. Example: the point (−3, 4) gives legs −3 and 4 and slanted side 5, so cos θ = −35 and sin θ = 45.
  • Signs by quadrant: All Silver Tea Cups. Quadrant I: All three positive. II: only Sine. III: only Tangent. IV: only Cosine. Example: an angle in Quadrant II has a negative cosine and a negative tangent.
  • Where each inverse answers. The inverse sine and the inverse tangent answer in the right half of the circle, from −π2 to π2 (the inverse tangent never reaches the ends). The inverse cosine answers in the top half, from 0 to π. Example: arccos(−12) = 2π3, in Quadrant II.
  • Interval brackets. A square bracket includes the end, a round one leaves it out: [0, π] contains 0 and π; (−π2, π2) contains neither end.
  • Squaring a negative. A negative times a negative is positive: (−5)2 = (−5) × (−5) = 25. So a squared leg is never negative.
  • Square root of a fraction. Take the root of the top and of the bottom: 1625 = 1625 = 45. A number that is not a perfect square keeps its root: 34 = 32.
  • Dividing fractions. Flip the second fraction and multiply: 1213 ÷ 513 = 1213 × 135 = 125, because the 13s cancel.
  • Tangent from sine and cosine. tan θ = sinθcosθ: dividing opphyp by adjhyp cancels the hypotenuse and leaves oppadj. Example: 35 ÷ 45 = 34.
  • Sine squared plus cosine squared. The point (cos θ, sin θ) sits on the unit circle x2 + y2 = 1, so sin2θ + cos2θ = 1. Example, θ = π6: (12)2 + (32)2 = 14 + 34 = 1.
  • Partners undo each other. sin(arcsin x) = x and cos(arccos x) = x when −1 ≤ x ≤ 1; tan(arctan x) = x for every x. Example: cos(arccos(−0.4)) = −0.4.

3 Why

An angle fixes the shape of its right triangle: right triangles with the same angle are copies at different sizes, so their side ratios agree. Saying sin θ = 35 fixes the shape (3, 4, 5, or 6, 8, 10, with the same ratios), and the range of the inverse sine, together with the sign of 35, fixes the quadrant. Every other trig value of θ is a ratio of sides of that shape, so it is already decided. The triangle lets you read it without finding θ, which matters: arcsin(35) is not a special angle, and in degrees it is about 36.87°, with no neat exact form.

4 The rule

For an expression such as cos(arcsin a): let θ= arcsin a, the principal value; draw θ in the quadrant that its range and the sign of a allow; label two sides from a, with a minus sign on a leg that points left or down; find the third side from adj2+ opp2= hyp2; then read sinθ=opphyp,cosθ=adjhyp or tanθ=oppadj.

When θ lands on an axis (a=0, or a=1 or −1 for arcsin and arccos) there is no triangle: read the value from the point on the unit circle, for example cos(arcsin 1) =cosπ2=0. For a letter: cos(arcsin x) =1−x2, for −1≤x≤1.

The same idea, five ways

Say it

Say 'cosine of arc sine of three fifths', and think 'the cosine of the angle whose sine is three fifths'.

Write it

Find the angle whose sine is 35, then take the cosine of that angle.

In math
  • cos(arcsin(35))
  • cos(sin−1(35))
  • cos θ, where θ = arcsin(35)
  • cos θ, where sin θ = 35 and −π2 ≤ θ ≤ π2
Like

A 5-foot ladder reaches 3 feet up a wall: how far out is its foot? The Pythagorean theorem answers 4 feet, and nobody measures the angle.

See it
3/5arcsincosfirstsecondθ, an angle4/5
The number 35 goes into the arcsin machine and comes out as an angle.

The same idea, other ways

As a picture

Put θ = arcsin(35) on the unit circle. It is the point in the right half at height 35 = 0.6, because sine is the height. The radius to that point is 1, so the Pythagorean theorem gives the across distance: 0.62 + ?² = 1, so ?² = 1 − 0.36 = 0.64 and ? = 0.8 = 45. On the unit circle the across distance is the cosine, so cos(arcsin(35)) = 45.

x = cos θy = sin θθ = arcsin(3/5)
The point for arcsin(35) sits at height 0.6, and its across distance, 0.8 = 45, is the cosine.
As two machines

Two machines stand in a row. The first, arcsin, takes the number 35 and gives back an angle θ. The second, cos, takes that angle and gives back a number. You never have to read θ in degrees: the cos machine only needs the shape of θ's triangle, and the label on θ, 'my sine is 35', already fixes that shape.

With numbers you already know

Try cos(arcsin(32)). From the special angles, arcsin(32) = π3 and cos π3 = 12. Now the triangle way: opposite 3, hypotenuse 2, so the adjacent leg is 4−3 = 1 = 1, and the cosine is 12. The triangle reproduces an answer you can verify on the unit circle, which is why you can trust it when the angle has no special name.

Why it must be true, without a triangle

Every angle obeys sin2θ + cos2θ = 1, because the point (cos θ, sin θ) sits on the unit circle. If sin θ = 35, then cos2θ = 1 − 925 = 1625, so cos θ is 45 or −45. Only the sign is still open, and the quadrant settles it: arcsin(35) lies in Quadrant I, where cosine is positive. The triangle is a drawing of this same calculation.

Inside functionIts rangeThe input givesInput > 0Input < 0
arcsin x[−π2,π2]opposite and hypotenuse, opphypQuadrant I (x = 1 gives π2, on the axis)Quadrant IV: opposite leg negative (x = −1 gives −π2, on the axis)
arccos x[0, π]adjacent and hypotenuse, adjhypQuadrant I (x = 1 gives 0, on the axis)Quadrant II: adjacent leg negative (x = −1 gives π, on the axis)
arctan x(−π2,π2)opposite and adjacent, oppadjQuadrant IQuadrant IV: opposite leg negative

5 How

  1. Say it in words and name the inside angle: cos(arcsin(35)) is the cosine of θ, where θ = arcsin(35), so sin θ = 35.
  2. Pick θ's quadrant from the table: a positive input gives Quadrant I; a negative input gives Quadrant IV for the inverse sine and the inverse tangent, and Quadrant II for the inverse cosine. An input of 0, 1 or −1 to the inverse sine or inverse cosine, or 0 to the inverse tangent, puts the angle on an axis: read those from the unit circle.
  3. Draw θ from the positive x-axis into that quadrant, and drop a line from the end of its slanted side to the x-axis. The right triangle this makes has the reference angle at the origin; giving its legs signs turns its ratios into the values for θ itself.
  4. Label the two sides the input gives: a sine gives opphyp, a cosine gives adjhyp, a tangent gives oppadj. A leg that points left or down is negative; the hypotenuse is always positive.
  5. Find the third side with adj2 + opp2 = hyp2: take the positive square root, then give a leg the sign of the direction it points.
  6. Read the outside function as a ratio of the signed sides with SOH-CAH-TOA, then check the sign with All Silver Tea Cups.

Evaluating a trig function of an inverse trig function

1
Are the two functions partners, like sin(arcsin(0.3)) or tan(arctan(7))?
YesThey undo each other, so the answer is the input: 0.3 and 7. For arcsin and arccos the input must be between −1 and 1. No triangle is needed.
NoGo on, after one check: an inside arcsin or arccos takes only numbers from −1 to 1, so cos(arcsin 2) has no value and you stop there. Otherwise different functions need a triangle.
↓
2
Is the input 0, 1 or −1 inside arcsin or arccos, or 0 inside arctan?
YesThe inside angle lies on an axis, so no triangle exists. Find the angle on the unit circle and evaluate the outside function there: cos(arcsin(1)) = cos π2 = 0.
NoGo on: draw a triangle.
↓
3
Is the inside function arccos?
YesTop half of the circle: Quadrant I for a positive input, Quadrant II for a negative one, where the adjacent leg is negative.
NoIt is arcsin or arctan, right half of the circle: Quadrant I for a positive input, Quadrant IV for a negative one, where the opposite leg is negative.
↓
4
Does the input give one leg and the hypotenuse (arcsin or arccos)?
YesMissing leg = hyp2−leg2; then give it the sign of the direction it points.
NoIt gives both legs (arctan): hyp = adj2+opp2, always positive.
  1. Write 'Let θ = (the inside)' and say what θ is: θ = arccos(−513) is the angle in [0, π] whose cosine is −513.
  2. Choose the quadrant from the range of the inside function and the sign of the input.
  3. Draw the triangle in that quadrant and label the two sides the input gives, with the minus sign on a leg that points left or down, never on the hypotenuse.
  4. Find the third side with the Pythagorean theorem and give it the sign of its direction.
  5. Read the outside function as a ratio of the signed sides.
  6. Check: the sign agrees with All Silver Tea Cups, and the inside function of your triangle gives back the input.

6 Worked example

Worked example

The cosine of the angle whose sine is three fifths

Find the exact value of cos(arcsin(35)).

Show the steps and the answer
xyθx = 4y = 3rP(4, 3)Ox = 4 (4 right) y = 3 (3 up) r = 5the ray from O through P (and beyond) = the terminal side
θ = arcsin(35) drawn in Quadrant I: up 3, slanted side 5, so the across leg is 4 and cos θ = 45.
  1. Say what it asks: the cosine of the angle whose sine is 35. Name that angle θ= arcsin(35), so sinθ=35 and −π2≤θ≤π2.This is the definition of the inverse sine: arcsin(35) is the one angle in [−π2, π2] whose sine is 35, its principal value. Naming it splits one tangled question into two small ones: what does θ look like, and what is cos θ.
  2. Pick the quadrant: the input 35 is positive, so θ is between 0 and π2, in Quadrant I.The inverse sine answers only in the right half of the circle, and there the sine is positive only above the x-axis. Quadrant II also has positive sines, but arcsin never answers past π2.
  3. Label two sides: sinθ=opphyp=35, so the opposite leg is 3 and the hypotenuse is 5.SOH: sine is opposite over hypotenuse, so the input hands you those two sides directly.
  4. Find the adjacent leg: adj2+32=52, so adj2+9=25,adj2=16, and adj =4. Plug back: 42+32=16+9=25=52.This finds the one missing side. The Pythagorean theorem says the legs squared add to the hypotenuse squared; subtracting 9 from both sides leaves adj2 alone; 4 × 4 = 16. Take the positive root because in Quadrant I the adjacent leg points right.
  5. Read the outside function: cosθ=adjhyp=45.CAH: cosine is adjacent over hypotenuse.
  6. Check the sign: θ is in Quadrant I, where all three functions are positive, so 45 keeps its plus sign.All Silver Tea Cups: in Quadrant I, All are positive.
Answer
cos(arcsin(35)) = 45
Double-check A second way, with no triangle: every angle has sin2θ + cos2θ = 1, because the point (cos θ, sin θ) sits on the unit circle x2 + y2 = 1. So cos2θ = 1 − (35)2 = 1 − 925 = 1625, and cos θ is 45 or −45. θ is in Quadrant I, where cosine is positive, so cos θ = 45, the same answer. Going back, the triangle 3, 4, 5 gives sin θ = 35, the input.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

Rung 1: a warm-up with a special angle, done two ways

Find the exact value of cos(arcsin(12)).

Show the steps and the answer
x = cos θy = sin θθ = arcsin(1/2) = π/6
The point at π6 is (32, 12): its height 12 is the sine and its across distance 32 is the cosine.
30°60°√31245°45°11√2
The 30-60-90 triangle has sides 1, 3 and 2, the same triangle the method builds for arcsin(12).
  1. Say what it asks: the cosine of the angle whose sine is 12. The answer will be a number.The inside, arcsin(12), is an angle; the outside, cos, turns that angle into a number.
  2. Find the inside angle exactly: arcsin(12)=π6.π6 lies in [−π2, π2] and sin π6 = 12: the point at π6 on the unit circle is (32, 12), and sine is its height.
  3. Evaluate the outside: cosπ6=32.Cosine is the across coordinate of that same point.
  4. Now the triangle way: sinθ=12=opphyp, so the opposite leg is 1 and the hypotenuse is 2, in Quadrant I.SOH, and a positive input to the inverse sine lands in Quadrant I.
  5. Find the adjacent leg: adj2+12=22, so adj2=4−1=3 and adj =3. Plug back: (3)2+12=3+1=4=22.The Pythagorean theorem finds the missing leg; 3 is not a perfect square, so the root stays as 3; it is positive because the leg points right.
  6. Read the outside: cosθ=adjhyp=32.CAH. It matches the unit-circle answer, which is why the triangle can be trusted when the angle has no special name.
Answer
32
Double-check The two routes agree. Also (12)2 + (32)2 = 14 + 34 = 1, as the sine and cosine of one angle must.

Rung 2 of 7

Rung 2: a new triangle, still in Quadrant I

Find the exact value of sin(arccos(817)).

Show the steps and the answer
θ81517
The input 817 gives the adjacent side 8 and the hypotenuse 17, and the theorem supplies the opposite side 15.
  1. Say what it asks: the sine of the angle whose cosine is 817. Name it θ= arccos(817), so cosθ=817 and 0≤θ≤π.Definition of the inverse cosine: the one angle in [0, π] with that cosine.
  2. Pick the quadrant: 817>0, so θ is between 0 and π2, in Quadrant I.In the top half of the circle, the cosine is positive only to the right of the y-axis.
  3. Label: cosθ=adjhyp=817, so the adjacent leg is 8 and the hypotenuse is 17.CAH: cosine is adjacent over hypotenuse.
  4. Find the opposite leg: 82+ opp2=172, so 64+ opp2=289, opp2=289−64=225, and opp =15. Plug back: 64+225=289=172.This finds the missing side. Subtract 64 from both sides; 15 × 15 = 225; positive because in Quadrant I the opposite leg points up.
  5. Read the outside: sinθ=opphyp=1517.SOH: sine is opposite over hypotenuse.
Answer
1517
Double-check Without the triangle: sin2θ = 1 − cos2θ = 1 − 64289 = 225289, so sin θ = 1517 or −1517; θ is in Quadrant I, where sine is positive, so sin θ = 1517.

Rung 3 of 7

Rung 3: a negative input to the inverse sine

Find the exact value of tan(arcsin(−725)).

Show the steps and the answer
x = cos θy = sin θθ = arcsin(−7/25)
A negative input sends the inverse sine below the x-axis.
  1. Say what it asks: the tangent of the angle whose sine is −725. Name it θ= arcsin(−725), so sinθ=−725 and −π2≤θ≤π2.Definition of the inverse sine.
  2. Pick the quadrant: the input is negative, so θ is between −π2 and 0, in Quadrant IV.The inverse sine answers in the right half of the circle; a negative sine there means below the x-axis. Quadrant III also has negative sines, but arcsin never answers there.
  3. Label with signs: sinθ=opphyp=−725, so the opposite leg is −7 and the hypotenuse is 25.In Quadrant IV the opposite leg points down, so the minus sign belongs to it. The hypotenuse is a length and stays positive.
  4. Find the adjacent leg: adj2+(−7)2=252, so adj2+49=625,adj2=576, and adj =24. Plug back: 576+49=625=252.(−7)2 = 49 because a negative times a negative is positive; 625 − 49 = 576 and 24 × 24 = 576. Positive because in Quadrant IV the adjacent leg points right.
  5. Read the outside: tanθ=oppadj=−724=−724.TOA, with the signed legs.
Answer
−724
Double-check Through sine and cosine: cos2θ = 1 − 49625 = 576625, so cos θ = 2425, positive in Quadrant IV. Then tan θ = sinθcosθ = (−725) ÷ 2425 = −725 × 2524 = −724. Sign: in Quadrant IV only cosine is positive, so the tangent must be negative.

Rung 4 of 7

Rung 4: a negative input to the inverse cosine

Find the exact value of tan(arccos(−513)).

Show the steps and the answer
x = cos θy = sin θθ = arccos(−5/13)
The inverse cosine of a negative number lands in Quadrant II, across negative and up positive.
  1. Say what it asks: the tangent of the angle whose cosine is −513. Name it θ= arccos(−513), so cosθ=−513 and 0≤θ≤π.Definition of the inverse cosine.
  2. Pick the quadrant: the input is negative, so θ is between π2 and π, in Quadrant II.The inverse cosine answers in the top half of the circle; a negative cosine there means left of the y-axis. It can never be Quadrant III or IV, because arccos never answers past π or below 0.
  3. Label with signs: cosθ=adjhyp=−513, so the adjacent leg is −5 and the hypotenuse is 13.In Quadrant II the adjacent leg points left, so it carries the minus sign; the hypotenuse stays positive.
  4. Find the opposite leg: (−5)2+ opp2=132, so 25+ opp2=169, opp2=144, and opp =12. Plug back: 25+144=169=132.Subtract 25 from both sides; 12 × 12 = 144. Positive because in Quadrant II the opposite leg points up.
  5. Read the outside: tanθ=oppadj=12−5=−125.TOA; a positive divided by a negative is negative. Dropping the minus sign would give 125, which answers a different question, tan(arccos(513)).
Answer
−125
Double-check Find the sine first, then divide: sin θ = opphyp = 1213, so tan θ = sinθcosθ = 1213 ÷ (−513) = 1213 × (−135) = −125. Sign: in Quadrant II only sine is positive, so the tangent is negative.

Rung 5 of 7

Rung 5: the inverse tangent, where you find the hypotenuse

Find the exact value of cos(arctan(−43)).

Show the steps and the answer
xyθx = 3y = −4rP(3, −4)Ox = 3 (3 right) y = −4 (4 down) r = 5the ray from O through P (and beyond) = the terminal side
arctan(−43) turns clockwise from the positive x-axis into Quadrant IV: across 3, down 4, slanted side 5.
  1. Say what it asks: the cosine of the angle whose tangent is −43. Name it θ= arctan(−43), so tanθ=−43 and −π2<θ<π2.Definition of the inverse tangent; its range leaves out both ends.
  2. Pick the quadrant: the input is negative, so θ is between −π2 and 0, in Quadrant IV.Tangent is negative in Quadrants II and IV, but the inverse tangent answers only in the right half of the circle, so Quadrant II is not allowed.
  3. Label with signs: tanθ=oppadj=−43, so the opposite leg is −4 and the adjacent leg is 3.TOA. In Quadrant IV the opposite leg points down, so the minus sign goes on it, not on the adjacent leg.
  4. Find the hypotenuse: hyp2=32+(−4)2=9+16=25, so hyp =5. Plug back: 9+16=25=52.This time both legs are known, so add their squares. The hypotenuse is a length, so take the positive root.
  5. Read the outside: cosθ=adjhyp=35.CAH: cosine is adjacent over hypotenuse.
Answer
35
Double-check Going back: the triangle gives tan θ = oppadj = −43, the input, and sin θ = −45 with cos θ = 35 gives 1625 + 925 = 1. Sign: in Quadrant IV cosine is positive; drawing the angle in Quadrant II would have given the wrong −35.

Rung 6 of 7

Rung 6: A negative inverse tangent with a root for the hypotenuse

Find the exact value of cos(arctan(−52)), and write it with no root in the denominator. The figure shows the line y = −52x through the origin, with the point (2, −5) on it.

(2, −5)−6−4−2246−6−4−2246
The line y = −52x through the origin, running through Quadrants II and IV.
Show the steps and the answer
  1. Say it in words and name the inside angle: cos(arctan(−52)) is the cosine of θ, where θ= arctan(−52), so tanθ=−52.The inverse tangent gives back an angle. Naming it θ turns the question into one about a single angle whose tangent is known and whose cosine is wanted.
  2. Pick θ's quadrant: the input −52 is negative, and a negative input to the inverse tangent gives Quadrant IV, so −π2<θ<0.The inverse tangent only returns angles strictly between −π2 and π2, which means Quadrant I or IV. Of those two, only Quadrant IV has a negative tangent. Quadrant II has negative tangents too, but its angles are outside that range. The input is not 0, so θ is not on an axis.
  3. Draw θ from the positive x-axis, turning clockwise into Quadrant IV, with its slanted side running from the origin through (2,−5). Then draw a line from (2,−5) straight up to the x-axis, meeting it at (2, 0).The point (2, −5) is 2 right of the origin and 5 down, and −52 = −52 = tan θ, so this half of the line y = −52x is θ's terminal side. The other half, through (−2, 5) in Quadrant II, has the same tangent, but θ does not end there. The vertical line makes a right triangle with the reference angle at the origin.
  4. Label the two sides the input gives. A tangent gives oppadj, so write −52 as −52: opp =−5 and adj =2.The vertical leg, from (2, 0) to (2, −5), points down, so it carries the minus sign. The horizontal leg, from the origin to (2, 0), points right, so it is positive. Putting the minus sign on the bottom instead, 5−2, would describe the point (−2, 5) in Quadrant II, which is the wrong quadrant.
  5. Find the third side, the hypotenuse, with adj2+ opp2= hyp2: 22+(−5)2=4+25=29, so hyp =29.Squaring removes the minus sign. The hypotenuse is a length, so take the positive square root. 29 is not a perfect square and has no square factor, so 29 is already in simplest form.
  6. Read the outside function with SOH-CAH-TOA: cosθ=adjhyp=229. Check the sign with All Silver Tea Cups: θ is in Quadrant IV, where the cosine is positive, and 229 is positive.CAH: the cosine is adjacent over hypotenuse, and both of those sides are positive. The minus sign from the input sits on the opposite side, which the cosine does not use. So a negative input to the inverse tangent still gives a positive cosine.
  7. Clear the root from the denominator: 229·2929=22929.2929 equals 1, so multiplying by it does not change the value. Since 29 · 29 = 29, the bottom becomes a whole number, which is the form the question asks for.
Answer
cos(arctan(−52)) = 22929
Double-check The same triangle gives sin θ = opphyp = −529. Then sin2θ + cos2θ = 2529 + 429 = 1, and sinθcosθ = −52 = −52, which is the tangent we started from. A calculator agrees: in degree mode, arctan(−2.5) ≈ −68.2° and cos(arctan(−2.5)) ≈ 0.3714, the same as 22929 ≈ 10.77029 ≈ 0.3714.

Work to write

  1. θ = arctan(−52), so tan θ = −52
  2. Quadrant IV: −π2 < θ < 0
  3. opp = −5, adj = 2
  4. hyp = 22+(−5)2 = 29
  5. cos θ = adjhyp = 229, positive in Quadrant IV
  6. 229·2929=22929
  7. cos(arctan(−52)) = 22929

Rung 7 of 7

Rung 7: a letter instead of a number

Write cos(arcsin x) with no trig functions in it, for −1 ≤ x ≤ 1.

Show the steps and the answer
θ√(1 − x²)x1
arcsin x as a triangle, drawn for an x between 0 and 1.
(√(1 − x²), x)
Whatever x is, arcsin x lands in the right half of the circle.
  1. Say what it asks: a formula in x for the cosine of the angle whose sine is x. Name it θ= arcsin x, so sinθ=x and −π2≤θ≤π2.Definition of the inverse sine. x must be between −1 and 1, because no angle has a sine outside that range.
  2. Label, for an x with 0 < |x| < 1: sinθ=x=x1, so the opposite leg is x and the hypotenuse is 1.SOH. Any number equals itself over 1, so a hypotenuse of 1 works for every x. Careful: here the letter x is the input, and it becomes the height of the triangle. At x = 0, 1 or −1 the triangle flattens, and the unit circle covers those inputs in the sign step.
  3. Find the adjacent leg: adj2+x2=12, so adj2=1−x2, and the leg's length is 1−x2. Plug back: (1−x2)2+x2=1−x2+x2=1.The Pythagorean theorem; subtract x2 from both sides, then take the square root. The square root of a difference does not split, so it stays 1−x2.
  4. Choose the sign: take the root that is not negative, 1−x2; it is 0 when x is 1 or −1.The inverse sine always answers in the right half of the circle (Quadrant I, Quadrant IV, or on an axis at 0, π2 or −π2), where the adjacent leg points right or has length 0. For a negative x the triangle flips below the x-axis, but its adjacent leg still points right. Every input from −1 to 1, the flat cases too, matches the point (1−x2, x) on the unit circle, whose left-right coordinate is the cosine.
  5. Read the outside: cos(arcsin x) =adjhyp=1−x21=1−x2.CAH; dividing by 1 changes nothing.
Answer
cos(arcsin x) = 1−x2, for −1 ≤ x ≤ 1
Double-check Try special angles. x = 12: arcsin(12) = π6 and cos π6 = 32; the formula gives 1−14 = 34 = 32. x = −12: arcsin(−12) = −π6 and cos(−π6) = 32; the formula gives the same 34 = 32. And x = 35 gives 1−925 = 1625 = 45, the worked example.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: cos(arcsin(35)) = 35, because cosine and arcsine cancel.
Only partners cancel: sin with arcsin, cos with arccos, tan with arctan. Here the outside is cos and the inside is arcsin, so nothing cancels. The inside angle has sine 35; its cosine is a different side over the hypotenuse.
✓ Instead: Triangle with opposite 3 and hypotenuse 5, so adjacent 4: cos(arcsin(35)) = 45.
✗ Not this: tan(arccos(−513)) = 125, read off a 5, 12, 13 triangle drawn in Quadrant I.
A negative input to the inverse cosine puts the angle in Quadrant II, where the adjacent leg points left and is −5. Tangent is negative in Quadrant II.
✓ Instead: tan(arccos(−513)) = 12−5 = −125.
✗ Not this: cos(arctan(−43)) = −35, drawing the angle in Quadrant II because tangent is negative there.
Tangent is negative in Quadrants II and IV, but the inverse tangent answers only between −π2 and π2, the right half, so the angle is in Quadrant IV, where cosine is positive.
✓ Instead: Opposite −4, adjacent 3, hypotenuse 5: cos(arctan(−43)) = 35.
✗ Not this: cos(arcsin x) = ±1−x2, keeping both signs to be safe.
A function gives one output, and the inverse sine always lands in the right half of the circle, where cosine is never negative. The minus version is wrong for every x except 1 and −1.
✓ Instead: cos(arcsin x) = 1−x2.
✗ Not this: 1−x2=1−x.
A square root does not split across a minus sign. Try x = 0.6: 1−0.36 = 0.64 = 0.8, but 1 − 0.6 = 0.4.
✓ Instead: Leave it as 1−x2.
✗ Not this: cos(arcsin(2)) = 1−4, using the formula.
The rule does not apply here: no angle has sine 2, because sine never leaves [−1, 1]. A triangle with opposite 2 and hypotenuse 1 would have a leg longer than its slanted side, and −3 has no real value, because no real number squares to −3.
✓ Instead: cos(arcsin(2)) is undefined, because arcsin(2) does not exist. The formula holds only for −1 ≤ x ≤ 1.

Tips and tricks

  • Say it in words before you touch it: cos(arcsin(35)) is 'the cosine of the angle whose sine is 35'. In written work, make your first line 'Let θ = arcsin(35), so sin θ = 35 and θ is in Quadrant I.'
  • Memory chain: inside gives two sides, Pythagoras gives the third, outside reads a ratio, the quadrant gives the sign.
  • The answer is a number, never an angle: the outside function has the last word. With an inverse on the outside, as in arcsin(sin 5π6), the answer is an angle instead.
  • A positive input lands in Quadrant I (an input of exactly 1 to arcsin or arccos lands on an axis), where every answer is positive. Only a negative input needs sign work.
  • Sign shortcuts: cos(arcsin of anything) and cos(arctan of anything) are never negative, because those angles live in the right half; sin(arccos of anything) is never negative, because the inverse cosine lives in the top half.
  • Check by going back: your finished triangle must give the original input. For cos(arcsin(35)), the triangle 3, 4, 5 gives sin θ = 35, as it should.
  • You do not need to memorize Pythagorean triples: the theorem rebuilds the third side in seconds. Recognizing 3, 4, 5 and 5, 12, 13 only saves time.

7 The trap

Drawing every triangle in Quadrant I. A negative input moves the inside angle: to Quadrant IV for the inverse sine and the inverse tangent, to Quadrant II for the inverse cosine, and one leg turns negative. An input of −1 to the inverse sine or cosine puts the angle on an axis instead, where no triangle forms; read that answer from the unit circle. Skip this and you get the right size with the wrong sign: 125 instead of −125 for tan(arccos(−513)). Decide the quadrant before you draw anything.

Flash cards

Say the answer out loud, then flip.

A ladder 13 feet long leans on a wall, its top 12 feet up. Find cos(arcsin(1213)) without finding any angle.
  • 513
  • θ = arcsin(1213) is the angle at the floor: the side opposite it is the wall, 12, and the hypotenuse is the ladder, 13. The Pythagorean theorem gives the floor side, 132−122 = 169−144 = 25 = 5, so cos θ = adjhyp = 513.
  • No angle is needed: two known sides already fix the triangle's shape, so they fix every ratio of its sides too.
The input to an inverse trig function is negative. In which quadrant do you draw the angle?
  • Inverse sine: Quadrant IV.
  • Inverse tangent: Quadrant IV.
  • Inverse cosine: Quadrant II.
  • Why: the inverse sine and inverse tangent give only angles in the right half of the unit circle (Quadrants I and IV), the inverse cosine only angles in the top half (Quadrants I and II), and a negative input rules out Quadrant I, where every trig value is positive.
  • An input of −1 to the inverse sine or inverse cosine lands on an axis instead.
Find sin(arccos(−817)) and tan(arccos(−817)).
  • sin(arccos(−817)) = 1517
  • tan(arccos(−817)) = −158
  • Why: a negative input puts θ = arccos(−817) in Quadrant II, with adjacent side −8 (it points left) and hypotenuse 17. The Pythagorean theorem gives the opposite side, 172−82 = 289−64 = 225 = 15 (it points up), so sin θ = opphyp = 1517 and tan θ = oppadj = 15−8.
  • Check: All Silver Tea Cups says only sine is positive in Quadrant II, which matches a positive sine and a negative tangent.

Lesson 8 of 8

Inverse values on a calculator, and why one answer is not all the answers

Subject: MathematicsLeans on: Signs by quadrantLeans on: sin⁻¹ means the inverse, not 1 overLeans on: Rounding to a decimal placeLeans on: Reading [0, 2π)Leans on: Reference angleLeans on: Principal valuesLeans on: A full turn lands on the same pointOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Picture a Ferris wheel. In every turn your seat passes each height between the bottom and the top twice: once on the way up and once on the way down. The top and the bottom themselves come once. Ask a careful friend when your seat was 0.6 of the way from the center up to the top, and you hear both moments. Ask your calculator and you hear one, the moment on the way up, because its sin⁻¹ key was built to give a single answer, the principal value. So the calculator is a quick helper with two habits you must manage. It speaks degrees or radians, and you choose which before you ask. It always gives one answer, so when a question wants every angle in a full turn, you find the twin yourself.

2 Picture it

0.6435: the calculator2.4981: the twinπ/2π3π/22π−110.6435: the calculator2.4981: the twinπ/2π3π/22π−11
The dashed level line y = 0.6 crosses one turn of the sine wave twice.

Reminder

Reminder: Signs by quadrant, sin⁻¹ means the inverse, not 1 over, Rounding to a decimal place, Reading [0, 2π), Reference angle, Principal values, A full turn lands on the same point
  • Signs by quadrant. All Silver Tea Cups: all three positive in Quadrant I, Sine in II, Tangent in III, Cosine in IV. Example: a point in Quadrant III has negative sine and negative cosine, so its tangent is positive.
  • sin⁻¹ means the inverse, not 1 over. sin⁻¹(0.6) is the angle whose sine is 0.6, about 0.6435. The number 1sin(0.6) is a different thing, about 1.7710.
  • Rounding to a decimal place. Look at the first digit you drop: 5 or more, raise the last kept digit by one; 4 or less, leave it. To four decimal places 2.4980915 becomes 2.4981; to the nearest tenth 14.4775 becomes 14.5.
  • Reading [0, 2π). The square bracket keeps 0; the round bracket leaves out 2π, which lands on the same point as 0. So each point of the circle is counted once: 0 ≤ t < 2π.
  • Reference angle. The angle from 0 to π2 between the terminal side and the x-axis: acute off the axes, and 0 or π2 for an angle on an axis. Example: 5π6 has reference angle π − 5π6 = π6.
  • Principal values. sin⁻¹ answers in [−π2, π2], cos⁻¹ in [0, π], tan⁻¹ in (−π2, π2). Example: cos⁻¹(−12) = 2π3, an angle past π2, while sin⁻¹(−12) = −π6, a negative angle.
  • A full turn lands on the same point. Adding 2π (or 360°) brings an angle back to the same point of the circle. Example: −0.4115 + 2π ≈ 5.8717.

3 Why

A key must print one number, so sin⁻¹ is the inverse function of sine on its restricted domain [−π2, π2]: the inverse sine, giving one principal value. The equation sin t = 0.6 asks for more: every angle in a full turn with sine 0.6. Sine is the height of a point on the unit circle, and a level line at height 0.6 cuts the circle twice, at mirror images across the vertical axis. The mirror of α stops α short of a half turn: π − α. The mode matters because one angle has two names, 36.87° and 0.6435 radians, and the calculator prints the name its mode asks for.

4 The rule

The sin−1,cos−1 and tan−1 keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin−1 k in [−π2,π2],cos−1 k in [0,π],tan−1 k in (−π2,π2), named in the units the mode is set to.

On [0,2π),sint=k and cost=k have two solutions when −1<k<1, one when k=1 or k=−1, and none when k<−1 or k > 1; tant=k has two for every k. With the reference angle α= the key pressed on |k|, the solutions are the angles among α,π−α,π+α and 2π−α (in degrees α,180°−α,180°+α,360°−α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0,2π) that solves the equation (sint=0 at 0 and π,cost=0 at π2 and 3π2,tant=0 at 0 and π).

The same idea, five ways

Say it

Sine of t equals 0.6 on one full turn has two answers: the one the calculator shows, about 0.64, and its twin, pi minus that, about 2.50.

Write it

The calculator gives only the principal value, sin⁻¹(0.6) ≈ 0.6435; the equation sin t = 0.6 on [0, 2π) has two solutions, that value and π − sin⁻¹(0.6) ≈ 2.4981.

In math
  • sin t = 0.6 and 0 ≤ t < 2π
  • t = sin⁻¹(0.6) or t = π − sin⁻¹(0.6)
  • t ≈ 0.6435 or t ≈ 2.4981
  • {t | sin t = 0.6 and 0 ≤ t < 2π} = {sin⁻¹(0.6), π − sin⁻¹(0.6)}
Like

A Ferris wheel seat passes each height strictly between its lowest and highest points twice per turn, going up and coming down; the calculator reports only the trip up.

See it
x = cos θy = sin θt ≈ 2.4981, height 0.6
The twin the calculator never shows: the same height 0.6, mirrored into Quadrant II.

The same idea, other ways

As a picture

On the unit circle, sine is the height of the point. Draw a level line at height 0.6. It cuts the circle at two points: one in Quadrant I, at t ≈ 0.6435, and its mirror image across the vertical axis in Quadrant II, at t ≈ 2.4981. The calculator shows only the Quadrant I point.

x = cos θy = sin θt ≈ 0.6435
The calculator's point sits at height 0.6 in Quadrant I.
As a story

On a day when the sun rises and sets, it climbs to one midday peak and sinks again, so it passes each height between the horizon and that peak twice, once in the morning and once in the afternoon, about equally far from the moment it is highest; the peak itself comes only once. A friend who only ever thinks about mornings tells you the morning time and stops. The calculator is that friend. You supply the afternoon time yourself, by mirroring across the middle of the day.

With numbers

Press sin(0.6435) and sin(2.4981): both show about 0.6. Two different angles, one sine. The sin⁻¹ key can print only one number, and it prints 0.6435 because only that one lies in its range, [−π2, π2], which runs from about −1.5708 to 1.5708.

As a rule of thumb

One key press, one answer. One full turn, two answers: for sine and cosine when the number is strictly between −1 and 1, and for tangent always. When a question says [0, 2π), check the number first: strictly between −1 and 1, or any number for tangent, means two answers, so go find the second; 1 or −1 means one; past them, none.

The mode, as a story

A thermometer can show one temperature as 68 in Fahrenheit or 20 in Celsius. An angle works the same way: sin⁻¹(0.6) prints about 36.87 in degree mode and about 0.6435 in radian mode, two names for one angle. The mode switch decides which name the calculator prints, and the calculator cannot guess which name your question wants.

Equation on [0, 2π)The key on k showsQuadrants of the answersThe two answers, with α = the key on |k|
sin t = k, 0 < k < 1α, in Quadrant II and IIα and π − α
sint=k,−1<k<0−α, a negative angleIII and IVπ + α and 2π − α
cos t = k, 0 < k < 1α, in Quadrant II and IVα and 2π − α
cost=k,−1<k<0π − α, in Quadrant IIII and IIIπ − α and π + α
tan t = k, k > 0α, in Quadrant II and IIIα and π + α
tan t = k, k < 0−α, a negative angleII and IVπ − α and 2π − α

5 How

  1. Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
  2. Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is π2; degree mode shows 90.
  3. Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
  4. Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
  5. Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
  6. Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.

Every solution of sin t = k, cos t = k or tan t = k on [0, 2π)

1
Does the question use π, say radians, or give the interval [0, 2π)?
YesSet radian mode.
NoIf it uses a degree sign, as in [0°, 360°), set degree mode.
↓
2
Is it sin t = k or cos t = k with k < −1 or k > 1?
YesNo solution: no point of the unit circle has that height or that left-right position, and the calculator usually shows an error. Stop.
NoGo on.
↓
3
Is it sin t = k or cos t = k with k = 1 or k = −1?
YesOne answer only, because the point and its mirror image are the same point: sin t = 1 gives π2, sin t = −1 gives 3π2, cos t = 1 gives 0, cos t = −1 gives π.
NoExpect two answers. Go on.
↓
4
Is |k| a special value from the unit circle, such as 12, 22 or 32 (for tangent: 33, 1 or 3)?
YesUse the exact reference angle from the unit circle, such as π6 when sin t = 12 (for cos t = 12 it is π3), and give exact answers; the calculator is not needed.
NoPress the inverse key on |k| to get α, keeping every digit.
↓
5
Is k negative?
YesThe answers lie where the function is negative: sine in III and IV, cosine in II and III, tangent in II and IV. For sine or cosine with k = −1 there is one answer, on an axis: 3π2 for sine, π for cosine.
NoThe answers lie where the function is positive: sine in I and II, cosine in I and IV, tangent in I and III. When k is 0, or 1 for sine or cosine, the answers sit on the axes: keep each different angle among α, π − α, π + α and 2π − α that lies in [0, 2π) and solves the equation.
  1. Read the units and set the mode: π or [0, 2π) means radians, a degree sign means degrees. Test with sin⁻¹(1).
  2. For sine or cosine, check that −1 ≤ k ≤ 1. If k is outside, write no solution and stop.
  3. Find the reference angle α: press the inverse key on |k|, the number without its minus sign. Keep every digit.
  4. Name the two quadrants from the sign of k, using All Silver Tea Cups. If k is 0, or 1 or −1 for sine or cosine, there are no quadrants to name: the answers sit on the axes.
  5. Write each answer from α: Quadrant I, α; Quadrant II, π − α; Quadrant III, π + α; Quadrant IV, 2π − α (in degrees 180° − α, 180° + α, 360° − α). When k is 0, or 1 or −1 for sine or cosine, the answers sit on the axes: keep each different angle among α, π − α, π + α and 2π − α that lies in [0, 2π) and solves the equation.
  6. If the answers came from the key, round only now and write ≈; exact answers keep =. Check: press sin, cos or tan of each answer and see k, up to rounding.

6 Worked example

Worked example

Solving tan θ = 1.8 on [0°, 360°): the key gives one angle, and the second is 180° later

Solve tan θ = 1.8 on [0°, 360°). Round each answer to the nearest tenth of a degree.

Show the steps and the answer
P
Unit circle with P at about 240.9°.
  1. Read the units. The interval [0°,360°) has a degree sign, so set the calculator to degree mode in its mode or setup menu.The inverse keys answer in whatever units the mode is set to. In radian mode tan⁻¹(1.8) would show 1.063697822, which is a radian measure, but the question asks for degrees.
  2. Test the mode with one press: sin−1(1). The screen shows 90.90 is the degree measure of the angle whose sine is 1, so the mode is right. If the screen showed 1.570796327, which is π2, the calculator would still be in radian mode.
  3. Count the solutions before computing. On [0°,360°),tanθ=k has two solutions for every k, so tanθ=1.8 has two, even though 1.8 > 1.Sine and cosine stay between −1 and 1, so sin θ = 1.8 would have no solution. Tangent takes every real value. The key shows only one angle, so the work is not finished when the screen gives its answer.
  4. Press SHIFT (or 2nd) and then tan to get tan−1. Type (1.8) and press enter. The screen shows 60.9453959. Call this angle α.tan⁻¹ is printed above tan as a second function. The x⁻¹ key is a different key: it would give 11.8 ≈ 0.5555555556, which is a reciprocal, not an angle. Because 1.8 is positive, the principal value is also the reference angle, α = tan⁻¹(|k|).
  5. Pick the quadrants. tanθ>0 in Quadrants I and III, so the solutions are θ=α and θ=180°+α.For the point (x, y) on the unit circle, tan θ = yx. This is positive when x and y have the same sign, which happens in Quadrants I and III. Of α, 180° − α, 180° + α and 360° − α, only α and 180° + α lie in those quadrants. The angle 180° − α is in Quadrant II, where tan θ = −1.8.
  6. Right after the α line, type 180+ Ans. The screen shows 240.9453959.Ans holds every digit of α, so no rounding enters from retyping. The key alone can never show this angle, because tan⁻¹ answers only between −90° and 90°. The point at 180° + α is directly opposite the point at α. Its coordinates are (−x, −y), and −y−x = yx = 1.8.
  7. Round only now, to the nearest tenth of a degree: θ≈60.9° and θ≈240.9°.The question asks for tenths. In both unrounded values the hundredths digit is 4, so both round down. Rounding once, at the end, keeps the answers accurate, and ≈ shows that they are rounded.
Answer
θ ≈ 60.9° or θ ≈ 240.9°
Double-check Both answers lie in [0°, 360°): 60.9° is in Quadrant I and 240.9° is in Quadrant III. They differ by exactly 180°, the period of tangent. In degree mode, tan(60.9453959) and tan(240.9453959) each show 1.8. For contrast, the Quadrant II candidate 180° − α gives tan(119.0546041) = −1.8, so it is not a solution. Testing the rounded angles is only approximate: tan 60.9° ≈ 1.7966, a little under 1.8, because tangent climbs steeply near 61°. That is why the check uses the unrounded values.

Work to write

  1. Degree mode: sin⁻¹(1) shows 90
  2. tan θ = k has two solutions on [0°, 360°) for every k
  3. α = tan⁻¹(1.8) ≈ 60.9453959°
  4. tan θ > 0 in Quadrants I and III, so θ = α or θ = 180° + α
  5. 180° + α ≈ 240.9453959°
  6. θ ≈ 60.9° or θ ≈ 240.9°

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

Rung 1: almost trivial, reading the mode from one key press

You press sin⁻¹(1) and the screen shows 90. Which mode is the calculator in, and what would the screen show in the other mode?

Show the steps and the answer
x = cos θy = sin θsine 1 at the top
Sine is 1 only at the top of the circle, a quarter turn: 90° or about 1.5708 radians.
  1. Say what it asks: sin−1(1) is the angle in [−π2,π2] whose sine is 1. The number on the screen names that angle in the calculator's current units.The angle itself never changes; only its name changes with the mode, so the number reveals the mode.
  2. Find the angle: sine is 1 only at the top of the unit circle, a quarter turn from the start.Sine is the height of the point, and the highest point of a circle of radius 1 has height 1.
  3. Name a quarter turn both ways: 90° in degrees, π2≈1.570796327 in radians.A full turn is 360° or 2π, and a quarter of each is 90° or π2.
  4. The screen shows 90, so the calculator is in degree mode.In radians a quarter turn is about 1.57, nowhere near 90.
Answer
  • Degree mode.
  • In radian mode the screen would show 1.570796327, which is π2.
Double-check Still in degree mode, press sin(90): the screen shows 1, so 90° really has sine 1. Press π ÷ 2: the screen shows 1.570796327, the radian name of the same quarter turn.

Rung 2 of 7

Rung 2: one key press, rounded two ways

Find tan⁻¹(2.5) in degrees, rounded to the nearest tenth of a degree, and in radians, rounded to four decimal places.

Show the steps and the answer
xyθx = 2y = 5rP(2, 5)Ox = 2 (2 right) y = 5 (5 up) r = √29.0 ≈ 5.4the ray from O through P (and beyond) = the terminal side
A terminal side through (2, 5) rises 5 for every 2 across: tangent 5 ÷ 2 = 2.5, an angle of about 68.2°.
  1. Say what it asks: the one angle between −90° and 90° whose tangent is 2.5, named first in degrees and then in radians.tan⁻¹(2.5) is one value of the inverse tangent. No interval such as [0, 2π) is given, so no second answer is wanted.
  2. Set degree mode and test: sin−1(1) shows 90. Press tan−1(2.5): the screen shows 68.19859051.The first answer is wanted in degrees, and the key returns the principal value, a Quadrant I angle because 2.5 is positive.
  3. Round to the nearest tenth: 68.2°.In 68.19859051 the digit after the tenths place is 9, which is 5 or more, so the 1 in the tenths place goes up to 2.
  4. Set radian mode and test: sin−1(1) shows 1.570796327. Press tan−1(2.5): the screen shows 1.19028995.It is the same angle, now named in radians.
  5. Round to four decimal places: 1.1903.In 1.19028995 the fifth decimal digit is 8, so the fourth decimal digit, 2, goes up to 3.
Answer
  • tan⁻¹(2.5) ≈ 68.2°
  • tan⁻¹(2.5) ≈ 1.1903 radians
Double-check In degree mode press tan(68.2): about 2.5002. In radian mode press tan(1.1903): about 2.5001. Both are 2.5 apart from the rounding. Second way: 1.19028995 × 180 ÷ π ≈ 68.19859, the degree answer before rounding.

Rung 3 of 7

Rung 3: two answers for a positive sine, in degrees

Solve sin θ = 0.25 on [0°, 360°). Round each answer to the nearest tenth of a degree.

Show the steps and the answer
x = cos θy = sin θθ ≈ 14.5°
Quadrant I: height 0.25.
x = cos θy = sin θθ ≈ 165.5°
The mirror image in Quadrant II has the same height 0.25.
  1. Say what it asks: every angle θ from 0° up to but not including 360° whose sine is 0.25.A full turn is wanted, so expect two answers.
  2. Set degree mode and test: sin−1(1) shows 90. Check that 0.25 is between −1 and 1.The interval is written in degrees, and a sine between −1 and 1 has angles to find.
  3. Press sin−1(0.25): the screen shows 14.47751219. Call it α.0.25 is positive, so the principal value is a Quadrant I angle: the reference angle.
  4. Sine is positive in Quadrants I and II.The point is above the x-axis there (All Silver Tea Cups: All in I, Sine in II).
  5. Quadrant I: θ=α≈14.47751219°. Quadrant II: θ=180°−α≈165.52248781°.In degrees a half turn is 180°, and the mirror image across the vertical axis stops α short of it.
  6. Round to the nearest tenth: 14.5° and 165.5°.In 14.47751219 the digit after the tenths place is 7, so the 4 goes up to 5. In 165.52248781 that digit is 2, so the 5 stays.
Answer
  • θ ≈ 14.5°
  • θ ≈ 165.5°
Double-check In degree mode press sin(14.5) and sin(165.5): both show about 0.2504, which is 0.25 apart from rounding to tenths. Second way: 14.5 + 165.5 = 180, as two positive-sine answers, mirror images across the vertical axis, must add to a half turn.

Rung 4 of 7

Rung 4: two answers for a positive cosine, a different mirror

Solve cos t = 0.3 on [0, 2π). Round each answer to four decimal places.

Show the steps and the answer
x = cos θy = sin θt ≈ 1.2661
Quadrant I: left-right position 0.3.
x = cos θy = sin θt ≈ 5.0171
The mirror image across the x-axis, in Quadrant IV, has the same left-right position 0.3.
  1. Say what it asks: every angle t in one full turn, from 0 up to but not including 2π, whose cosine is 0.3.Cosine is the left-right position of the point on the unit circle, and a full turn passes the position 0.3 twice.
  2. Set radian mode and test: sin−1(1) shows 1.570796327. Check that 0.3 is between −1 and 1.The interval uses π, and a cosine between −1 and 1 has angles to find.
  3. Press cos−1(0.3): the screen shows 1.266103673. Call it α.0.3 is positive, so the principal value, which lies in [0, π], is in Quadrant I: it is the reference angle.
  4. Cosine is positive in Quadrants I and IV.The point is right of the vertical axis there (All Silver Tea Cups: Cosine in IV).
  5. Quadrant I: t=α≈1.266103673. Quadrant IV: type 2π−cos−1(0.3), which shows 5.017081634.Mirroring the point across the x-axis keeps its left-right position 0.3, and the mirror stops α short of a full turn: 2π − α. The sine pattern π − α would mirror across the vertical axis and give cosine −0.3.
  6. Round to four decimal places: 1.2661 and 5.0171.In 1.266103673 the fifth decimal digit is 0, so 1.2661 stays. In 5.017081634 the fifth decimal digit is 8, so the 0 before it goes up to 1.
Answer
  • t ≈ 1.2661
  • t ≈ 5.0171
Double-check Press cos(1.2661) and cos(5.0171): both show 0.3000 when rounded to four decimal places. Second way: 1.2661 + 5.0171 = 6.2832 ≈ 2π, as two cosine answers, mirror images across the x-axis, must add to a full turn.

Rung 5 of 7

Rung 5: a negative sine, where the calculator's answer is outside the interval

Solve sin t = −0.4 on [0, 2π). Round each answer to four decimal places.

Show the steps and the answer
calculator: −0.41153.55315.8717π2π−11
The calculator's crossing lies left of 0, outside the interval.
  1. Say what it asks: every angle t in one full turn, from 0 up to but not including 2π, whose sine is −0.4, a height below the center.A full turn is wanted, so expect two answers, both below the x-axis.
  2. Set radian mode and test: sin−1(1) shows 1.570796327. Check that −0.4 is between −1 and 1.The interval uses π, and a sine between −1 and 1 has angles to find.
  3. Notice what sin−1(−0.4) shows: −0.4115168461. It is negative, so it is not in [0,2π) at all.The principal value of sin⁻¹ for a negative number is a clockwise angle between −π2 and 0.
  4. Find α from the positive number: sin−1(0.4) shows 0.4115168461.The reference angle is acute and positive, and the key on |k| = 0.4 gives it directly.
  5. Sine is negative in Quadrants III and IV.The point is below the x-axis there; sine is positive only in Quadrants I and II.
  6. Quadrant III: type π+sin−1(0.4), which shows 3.553109500. Quadrant IV: type 2π−sin−1(0.4), which shows 5.871668461.π + α goes α past a half turn, landing below the x-axis on the left; 2π − α stops α short of a full turn, landing below the x-axis on the right.
  7. Round to four decimal places: 3.5531 and 5.8717.In 3.553109500 the fifth decimal digit is 0, so 3.5531 stays. In 5.871668461 the fifth decimal digit is 6, so the 6 before it goes up to 7.
Answer
  • t ≈ 3.5531
  • t ≈ 5.8717
Double-check Press sin(3.5531) and sin(5.8717): both show −0.4000 when rounded to four decimal places. Second way: add a full turn to the calculator's own answer: −0.4115168461 + 2π ≈ 5.8717, the Quadrant IV answer.

Rung 6 of 7

Rung 6: a negative cosine, where the calculator's answer is not the reference angle

Solve cos θ = −0.7 on [0°, 360°). Round each answer to the nearest tenth of a degree.

Show the steps and the answer
x = cos θy = sin θθ ≈ 134.4°
Quadrant II: left-right position −0.7, the calculator's own answer.
x = cos θy = sin θθ ≈ 225.6°
Quadrant III: the mirror image across the x-axis, the same left-right position −0.7.
  1. Say what it asks: every angle θ from 0° up to but not including 360° whose cosine, the left-right position on the unit circle, is −0.7.A full turn is wanted, so expect two answers, both left of the vertical axis.
  2. Set degree mode and test: sin−1(1) shows 90. Check that −0.7 is between −1 and 1.The interval is in degrees, and a cosine between −1 and 1 has angles to find.
  3. Notice what cos−1(−0.7) shows: 134.427004. It is one answer, but it is not the reference angle, because it is bigger than 90°.The principal value of cos⁻¹ lies in [0°, 180°], and a negative input lands past 90°, in Quadrant II.
  4. Find α from the positive number: cos−1(0.7) shows 45.572996.The reference angle is acute, and the key on |k| = 0.7 gives it directly.
  5. Cosine is negative in Quadrants II and III.The point is left of the vertical axis there (All Silver Tea Cups: cosine is positive only in I and IV).
  6. Quadrant II: θ=180°−α≈180−45.572996=134.427004°. Quadrant III: θ=180°+α≈180+45.572996=225.572996°.180° − α stops α short of a half turn; 180° + α goes α past it. The Quadrant II answer matches the calculator's 134.427004, as it should.
  7. Round to the nearest tenth: 134.4° and 225.6°.In 134.427004 the digit after the tenths place is 2, so 134.4 stays. In 225.572996 that digit is 7, so the 5 goes up to 6.
Answer
  • θ ≈ 134.4°
  • θ ≈ 225.6°
Double-check In degree mode press cos(134.4) and cos(225.6): both show about −0.6997, which is −0.7 apart from rounding to tenths. Second way: 134.4 + 225.6 = 360, as two cosine answers must add to a full turn. The tempting move of treating 134.427 as α gives 180 + 134.427 = 314.427°, whose cosine is +0.7, the wrong sign.

Rung 7 of 7

Rung 7: the hardest, a negative tangent

Solve tan t = −2 on [0, 2π). Round each answer to four decimal places.

Show the steps and the answer
2.03445.1760π/2π3π/22π−4−224
The level line y = −2 crosses the tangent graph twice in one turn, at about 2.0344 and 5.1760.
  1. Say what it asks: every angle t in one full turn, from 0 up to but not including 2π, whose tangent is −2.A full turn is wanted, and tan t = k has two answers in a full turn for every k.
  2. Set radian mode and test: sin−1(1) shows 1.570796327. Skip the −1 to 1 check.Tangent is yx, a slope, and a slope can be any real number, so tan t = k always has answers.
  3. Notice what tan−1(−2) shows: −1.107148718. It is negative, so it is outside [0,2π).The principal value of tan⁻¹ lies in (−π2, π2), and a negative input gives a clockwise angle.
  4. Find α from the positive number: tan−1(2) shows 1.107148718.The key on the positive number gives the acute reference angle.
  5. Tangent is negative in Quadrants II and IV.Tangent is yx. In Quadrant II, y is positive and x negative; in Quadrant IV, y is negative and x positive. A positive divided by a negative, or a negative divided by a positive, is negative.
  6. Quadrant II: type π−tan−1(2), which shows 2.034443936. Quadrant IV: type 2π−tan−1(2), which shows 5.176036589.π − α stops α short of a half turn; 2π − α stops α short of a full turn.
  7. Round to four decimal places: 2.0344 and 5.1760.In 2.034443936 the fifth decimal digit is 4, so 2.0344 stays. In 5.176036589 the fifth decimal digit is 3, so 5.1760 stays; write the final 0 to show four places.
Answer
  • t ≈ 2.0344
  • t ≈ 5.1760
Double-check Press tan(2.0344) and tan(5.1760): both show about −2.0002, which is −2 apart from rounding. Second way: add a half turn and a full turn to the calculator's own answer: −1.107148718 + π ≈ 2.0344 and −1.107148718 + 2π ≈ 5.1760. A half turn moves the point to the opposite side of the circle, where x and y both change sign and yx stays the same.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: sin t = 0.6 on [0, 2π), so t = sin⁻¹(0.6) ≈ 0.6435, and that is the whole answer.
The sin⁻¹ key gives one principal value from [−π2, π2]. The question asks for every angle in a full turn, and the height 0.6 is reached twice on the circle.
✓ Instead: t ≈ 0.6435 and t = π − sin⁻¹(0.6) ≈ 2.4981.
✗ Not this: In degree mode sin⁻¹(0.6) shows 36.86989765, so t ≈ 36.8699 and t ≈ π − 36.8699 ≈ −33.7283.
36.87 counts degrees and π counts radians, so the subtraction mixes units and lands on a negative number outside [0, 2π). Every radian answer on [0, 2π) lies between 0 and 6.2832.
✓ Instead: Switch to radian mode and test with sin⁻¹(1): t ≈ 0.6435 and t ≈ 2.4981.
✗ Not this: For sin θ = 0.6 on [0°, 360°) with the calculator in radian mode: θ ≈ 0.6435° and θ ≈ 180° − 0.6435° = 179.3565°.
0.6435 is a radian number wearing a degree sign. The check exposes it: sin(0.6435°) is about 0.0112, not 0.6.
✓ Instead: In degree mode: θ ≈ 36.8699° and θ ≈ 180° − 36.8699° = 143.1301°.
✗ Not this: Rounding first: α ≈ 0.64, so the twin is π − 0.64 ≈ 2.5016.
The 0.0035 dropped at the start rides along into the answer, which comes out 0.0035 too big.
✓ Instead: Keep every digit: π − sin⁻¹(0.6) shows 2.498091545, which rounds to 2.4981.
✗ Not this: Typing 3.14 for π: 3.14 − 0.6435011088 ≈ 2.4965.
3.14 is π cut short by about 0.0016, and the answer comes out short by the same amount.
✓ Instead: Use the π key: π − 0.6435011088 ≈ 2.4981.
✗ Not this: Pressing sin(0.6), then the x⁻¹ key, and reading 1.7710 as sin⁻¹(0.6).
The x⁻¹ key means 1 over the number, so this computes 1sin(0.6), about 1.7710, which is not an angle with sine 0.6. The inverse sine is the second function printed above the sin key.
✓ Instead: Press 2nd (or SHIFT), then sin, then 0.6: radian mode shows 0.6435011088.
✗ Not this: For cos t = 0.3 on [0, 2π), copying the sine pattern: t ≈ 1.2661 and t ≈ π − 1.2661 ≈ 1.8755.
π − α mirrors the point across the vertical axis, which keeps the height but flips the left-right position, so cos(1.8755) ≈ −0.3, the wrong sign.
✓ Instead: Cosine mirrors across the x-axis: t ≈ 1.2661 and t = 2π − cos⁻¹(0.3) ≈ 5.0171.
✗ Not this: sin⁻¹(1.2) shows an error, so the mode must be wrong and sin t = 1.2 needs another method.
Sine is a height on a circle of radius 1, so it is never above 1. No angle has sine 1.2, in any mode, and the error is the calculator saying so.
✓ Instead: sin t = 1.2 has no solution.
✗ Not this: For sin t = 1 on [0, 2π): t = π2 and t = π − π2, two answers.
π − π2 is π2 again: the top of the circle is its own mirror image.
✓ Instead: One answer: t = π2.

Tips and tricks

  • One-press mode test: sin⁻¹(1) shows 90 in degree mode and 1.570796327 in radian mode. Do it every time you pick up the calculator.
  • Size check: answers on [0, 2π) lie between 0 and 6.2832, and answers on [0°, 360°) between 0 and 360. A radian answer like 36.87 means the calculator is in degree mode.
  • Twin check: two cosine answers always add to 2π (360°); two tangent answers always differ by π (180°); two sine answers add to π (180°) when k is positive and to 3π (540°) when k is negative.
  • Memory cue for the four positions, going around from Quadrant I: α, then half minus (π − α), half plus (π + α), full minus (2π − α).
  • Press the inverse key on the positive number |k| every time. The result is always the reference angle, an angle from 0 to π2, which keeps the quadrant rule the same for sine, cosine and tangent.
  • What to write down: the reference angle, the quadrants with the reason, and every answer: with = when it is exact, such as t = 5π6, and with ≈ and the rounding place when it is rounded, such as t ≈ 2.4981 (four decimal places).

7 The trap

The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.

Flash cards

Say the answer out loud, then flip.

Why does the sin⁻¹ key show only one angle?
A key must print one number, so sin⁻¹ gives the principal value: the one angle in [−π2, π2] with that sine. When a question wants every angle in a full turn, you find the second one yourself when there is one: an input of 1 or −1 has only one angle per turn.
What one press tells you whether the calculator is in degrees or radians?
  • Press sin⁻¹(1).
  • Radian mode shows 1.570796327, which is π2.
  • Degree mode shows 90.
On [0, 2π), how many solutions does sin t = k have?
  • Two when −1 < k < 1: a level line at height k cuts the unit circle twice.
  • One when k = 1 or k = −1: the line touches the circle only at the top or the bottom.
  • None when k < −1 or k > 1: the line misses the circle.