Graphs of the other four functions: crash course
about 27 min to listen9 lessons14 questions to tryUnit 5 of 11
Short view. Each lesson's rule, its steps and its trap. Switch to Full for a worked example and a question to try in every lesson.Full view. Each lesson's rule, its steps, one worked example with Watch it solved, the trap, and one question to try.
Starts here no skill from another unit needed first
1 Four formulas and the inputs they must skip
The rule
; ; ; .
For tan and sec, require ; for cot and csc, require , with n any integer.
How
- Write the formula as a fraction because the denominator identifies the restriction.
- Set the denominator equal to 0 to find the inputs that would make the division impossible.
- Read those angles from the unit circle and substitute them back into the denominator to verify it is 0.
- Exclude those inputs. Keep a zero numerator when the denominator is nonzero.
Worked example
Worked example
Which machines accept a quarter-turn?
In plain words, use one angle to decide which machines have a number to return. Find tan, cot, sec and csc at x = .
Show the steps and the answer
- The point at is (0, 1), so and .The first coordinate is cosine and the second is sine.
- and , so both are undefined.Their common denominator, cosine, is 0. This verifies why the angle is excluded.
- and .Their denominator, sine, is 1, so both divisions are permitted.
- tan(): undefined.
- cot(): 0.
- sec(): undefined.
- csc(): 1.
The trap
A zero on the top is not a break. Check the bottom first: = 0, while is undefined.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
Zero on the bottom
In plain words, decide whether a half-turn has a cosecant output. Find csc π.
Show the steps and the answer
- , so would be .The point at π is (−1, 0).
- Exclude .This is a verified sine zero, so the fraction has no output.
2 Range: the output heights each graph can reach
The rule
tan x and cot x have range .
sec x and csc x have range , meaning or .
How
- Identify whether you have a quotient function or a reciprocal-of-sine-or-cosine function.
- For tangent or cotangent, accept any real output because every height occurs.
- For secant or cosecant, keep outputs at or below −1 and at or above 1.
- Include −1 and 1; exclude only the open middle band −1 < y < 1.
Worked example
Worked example
Which proposed secant heights are possible?
In plain words, check four proposed heights against the range. Decide whether sec x can equal 1, −2, 0 or .
Show the steps and the answer
- Keep 1 because .The endpoint 1 is included, and input 0 gives it.
- Keep because , so .A reciprocal retains the negative sign. Reflection of the 60° circle point into the upper-left region changes cosine to −.
- Reject 0 because 1 divided by a finite nonzero number cannot be zero.If the reciprocal equaled 0, multiplying by its denominator would give 1 = 0.
- Reject because it would require , outside cosine's possible coordinates.Taking the reciprocal back checks whether the proposed output could have a valid denominator.
- 1: possible.
- −2: possible.
- 0: impossible.
- : impossible.
The trap
Excluding ±1 along with the middle band. The gap is open: −1 < y < 1. At the edges, reciprocal values are still ±1.
3 Even and odd: how the picture balances
The rule
is even, with y-axis symmetry.
and are odd, with origin symmetry. In each identity, x and must both be allowed inputs.
How
- Check that the input is allowed before using symmetry.
- If the function is secant, negate the input and keep the output height.
- If it is tangent, cotangent or cosecant, negate both input and output.
- On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.
Worked example
Worked example
Same input distance, different symmetry
In plain words, predict the heights at the mirror input without rebuilding the circle each time. Find sec(−) and tan(−) using the positive-angle values.
Show the steps and the answer
- , and .The equal positive circle coordinates give tangent 1 and the refreshed reciprocal gives secant .
- .Even symmetry keeps the output height when the input changes sign.
- .Odd symmetry changes the output sign when the input changes sign.
- sec(−) = .
The trap
Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.
4 Period: copy the right-sized piece
The rule
and .
and . Their fundamental periods are and respectively.
How
- Select π for tangent or cotangent and 2π for secant or cosecant.
- Sketch a complete piece of that width, keeping excluded endpoints out of the graph.
- Copy its points and breaks left and right by integer multiples of the period.
- For an exact value, add or subtract complete periods to reach a known allowed input.
Worked example
Worked example
Use a period to reach a familiar input
In plain words, remove complete repeating pieces until each input is an angle you know. Find tan() and csc().
Show the steps and the answer
- .2π is two tangent periods, so subtracting it preserves tangent's output.
- .The remaining input has equal positive sine and cosine.
- .2π is one cosecant period, so subtracting it preserves cosecant's output.
- .The remaining input has sine 1, whose reciprocal is 1.
- csc() = 1.
The trap
Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
Move a negative input to a familiar angle
Find tan(−). In plain words, add complete tangent repeats until the input becomes a familiar positive angle.
Show the steps and the answer
- Add : .Two tangent periods preserve the output and make the remaining angle familiar.
- At , sine and cosine are both , so tangent is 1.Equal nonzero numbers divide to 1.
5 Tangent and the meaning of a vertical asymptote
The rule
, with for every integer n.
The vertical asymptotes are .Each branch is continuous and increasing; the central branch is on and the pattern repeats every .
How
- Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.
- For the central branch, use x = − and x = . Check cos(−) = 0 and cos() = 0 before drawing the dashed vertical lines.
- Plot (−, −1), (0, 0), and (, 1), using the exact unit-circle values in the worked example's three-column table.
- Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.
- Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.
Worked example
Worked example
The tangent branch through (π, 0) and its vertical asymptotes
Graph the branch of y = tan x that passes through the point (π, 0). The three-column table gives exact values on this branch: tan() = −1, tan(π) = 0 and tan() = 1. The table lists the inputs as multiples of π, so 0.75, 1 and 1.25 stand for , π and . (a) Use cos x = 0 to find the two vertical asymptotes that bound this branch, and check that cos x = 0 at each one. (b) Confirm the three table values from the unit-circle values of sin x and cos x, then plot the three points. (c) Describe what the graph does as x approaches each asymptote from inside the branch, and explain why the graph never meets the line x = . (d) Copy the branch π units left and π units right, and list every vertical asymptote in the three-branch sketch.
Show the steps and the answer
- Solve . On the unit circle, cos x is 0 only at the top point (0, 1) and the bottom point , so for every integer n: …, , … The nearest of these on each side of are on the left and on the right.tan x = , so any input that makes the denominator cos x equal 0 has no tangent value and must be excluded. The branch through (π, 0) runs from the nearest excluded input on the left of π to the nearest excluded input on the right of π.
- Check both boundary inputs before drawing: (with ) and (with ). Then draw dashed vertical lines and . They are apart, which is the width of one branch.A dashed line belongs only where the denominator really is 0. Do not draw one where sin x = 0. At x = π, tan(π) = 0 ÷ (−1) = 0, so that input gives a point on the graph and does not give an asymptote.
- Confirm the table with exact unit-circle values. At : and , so . At : and , so . At : and , so . Plot and .Exact values give exact points. is halfway between and π, and is halfway between π and . The three points therefore mark the center of the branch and one point on each side of it.
- Find the sign of tan x close to each line. Just right of (Quadrant II), sin x is close to 1 and cos x is a small negative number, so the quotient is a large negative number. Just left of (Quadrant III), sin x is close to and cos x is a small negative number, so the quotient is a large positive number.Dividing a number near 1 or −1 by a number shrinking toward 0 gives outputs that grow past any bound. The signs of sin x and cos x decide whether the curve heads down or up.
- Draw one smooth rising curve through the three points. As x approaches from the right, the curve drops without bound beside that dashed line. As x approaches from the left, the curve rises without bound beside the other dashed line. The curve gets ever closer to each line but never touches or crosses it.Each branch of tangent is continuous and increasing on its open interval. The inputs x = and x = are outside the domain, so no point of the graph can lie on those lines. That is the meaning of a vertical asymptote: an excluded input where the outputs grow without bound as the inputs close in on it.
- Copy the branch units left and units right. Subtract from each point to get , (0, 0) and between and . Add to each point to get and between and . Draw the new dashed lines and , and keep every curve separate from every line.Tangent repeats every π, so tan(x + π) = tan x and tan(x − π) = tan x. Moving every point of one branch by π gives the neighboring branch. Moving a line x = + nπ by π gives another line of the same form.
Work to write
- cos x = 0 when x = + nπ, so the branch through (π, 0) lies between x = and x =
- cos() = 0 and cos() = 0, so the dashed asymptotes are x = and x =
- Plot (, −1), (π, 0) and (, 1), then draw one smooth rising curve through them
- As x approaches from the right, tan x drops without bound; as x approaches from the left, tan x rises without bound
- x = is not in the domain because cos() = 0, so the graph never touches that line
- Copies: (−, −1), (0, 0), (, 1) and (, −1), (2π, 0), (, 1)
- Asymptotes in the sketch: x = −, x = , x = , x =
The trap
Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
Add the quarter-π points
Add tan() and tan() to the central sketch. This asks for the heights at the two inputs on either side of 0.
Show the steps and the answer
- At , divide by to get 1.Sine and cosine are equal and nonzero there.
- At , divide by to get .Sine is negative and cosine positive, with equal magnitudes.
- Plot , (0, 0), and , then connect them with a smooth rising curve inside the boundary lines.The accepted inputs and outputs in the table guide the continuous increasing branch.
- Central branch: rises through the three points.
6 Cotangent: the branch that falls
The rule
, with for every integer n.
Its vertical asymptotes are and its period is .
On , the continuous decreasing branch passes through , and .
How
- Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.
- For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.
- Read the three table columns to plot (, 1), (, 0), and (, −1).
- Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.
- Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.
Worked example
Worked example
The cotangent branch between π and 2π
Graph the branch of y = cot x that passes through the point (, 0), then extend the graph using the period. The three-column table gives exact values on this branch: cot() = , cot() = 0 and cot() = −. The table lists each input as a count of sixths of π, so 8, 9 and 10 stand for , and . It rounds the outputs to two decimal places: 0.58, 0 and −0.58.
Show the steps and the answer
- Solve . Sine is zero at …, , 0, , …, which is for every integer n. Exclude these inputs, so the domain of is .cot x = has sin x in the denominator, and division by 0 is undefined. At x = nπ the numerator cos x is 1 or −1, not 0. So the size of the quotient grows without bound near x = nπ, which makes each line x = nπ a vertical asymptote.
- Since , the branch through lies between and , two neighboring zeros of sine. Draw dashed vertical lines at and . Plug the endpoints back into sine: and .A cotangent branch runs from one asymptote to the next. No multiple of π lies strictly between π and 2π, so the curve is unbroken there. Checking sine at both endpoints confirms that the dashed lines sit exactly where the denominator is zero.
- Read the three table columns. Convert each input: and . Pair them with the exact outputs , 0 and , which the table shows as 0.58, 0 and . Plot and .The table counts sixths of π so that every input is a whole number. Dividing a count by 6 and simplifying turns it back into an angle. All three inputs lie between π and 2π. The zero sits exactly halfway between the asymptotes, because (π + 2π) ÷ 2 = .
- Draw one smooth curve through the three points that falls from left to right. On the right side of the curve rises without bound along the dashed line. On the left side of it falls without bound.On the interval (π, 2π), sin x is negative. Just right of π, cos x is near −1 and sin x is a tiny negative number, so is a large positive number. Just left of 2π, cos x is near 1 and sin x is a tiny negative number, so the quotient is a large negative number. The table agrees: as x increases, the outputs go , then 0, then −.
- Copy the branch every units. Moving the three points to the left gives and between and . Moving them to the right gives and between and . Draw a dashed asymptote at every and keep each copy separate there.Cotangent has period π, so cot(x + π) = cot x. Every branch is therefore the same falling curve shifted by a multiple of π. The function is undefined at each x = nπ, so no copy is joined to its neighbor across an asymptote.
Work to write
- sin x = 0 at x = nπ, so cot x is undefined there: x ≠ nπ
- Asymptotes x = π and x = 2π; sin π = 0 and sin 2π = 0
- Plot (, ), (, 0), (, −)
- Falling branch: rises without bound just right of x = π, falls without bound just left of x = 2π
- Period π: copy the branch between each x = nπ and x = (n + 1)π, kept separate at x = nπ
The trap
Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at that gives the valid output 0.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
Draw the positive half of the branch
Sketch cotangent for 0 < x ≤ , including its point at . This asks for the positive half of a branch and the midpoint zero, while excluding 0.
Show the steps and the answer
- Exclude 0 because ; draw the dashed line .Substitution finds and verifies the zero denominator at the left boundary.
- At , divide by itself to get 1, then plot .Equal nonzero cosine and sine values give the quotient 1.
- Include and draw a falling curve toward it from high positive heights near 0.The denominator is positive inside this half-interval, and the quotient decreases toward its allowed zero.
- Excluded boundary: x = 0.
- Points: (, 1), (, 0).
- Shape: positive and falling on (0, ), with the zero at included.
7 Cosecant: build a reciprocal graph from sine
The rule
, with for every integer n.
Its vertical asymptotes are , its range is , its period is , and .
How
- Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.
- Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.
- Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.
- Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.
- Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.
Worked example
Worked example
A complete cosecant period
You need the graph pieces across one full turn, including the locations where no point exists. Sketch y = csc x on 0 ≤ x ≤ 2π using sine as the guide.
Show the steps and the answer
- Draw the sine guide from to , using the sine fntable visual.The sine row gives the starting height under each angle, and the reciprocal construction keeps that angle fixed.
- Set to find denominator zeros: in this interval. Plug them back in: .This finds the inputs that cannot be used in , so each gets an asymptote and no cosecant point.
- Keep and .The sine guide has height 1 and −1 there, and = 1 while = −1.
- Read the columns under and in the sine table. Replace their heights by .These two reciprocal points guide the positive branch on (0, π). Rebuild the farther input: = π − , so reflection across the vertical axis keeps sine .
- Read the columns under and . Replace their heights by .A positive numerator divided by a negative denominator gives a negative output, guiding the negative branch on (π, 2π). Here = π + , so a half-turn reverses sine. Also = 2π − , so reflecting to − and adding a full turn gives the same negative sine.
- Draw an upward-opening curved branch through , and a downward-opening curved branch through , approaching their boundary lines.As sine approaches zero from the branch's sign, the reciprocal magnitude grows without bound. Neither branch enters −1 < y < 1.
- Asymptotes in the interval: x = 0, π, 2π.
- Positive branch: 0 < x < π, vertex (, 1).
- Negative branch: π < x < 2π, vertex (, −1).
- Repeat the pattern every 2π.
The trap
taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.
Quick check
Try it before you open its steps. It is question 2 of 4 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 4
A positive fraction moves outward
You need the output at a sine height of one half. Evaluate csc() and locate its point.
Show the steps and the answer
- Use .The 30° unit-circle vertical coordinate is one half.
- Compute .Dividing by a fraction means multiplying by its reciprocal.
- Plot , above the vertex's height of 1.The positive reciprocal height stays positive and moves farther from the x-axis.
- csc() = 2.
- Point: (, 2).
8 Secant: build a reciprocal graph from cosine
The rule
, with for every integer n.
Its vertical asymptotes are , its range is , its period is , and .
How
- Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.
- Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.
- Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.
- Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.
- Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.
Worked example
Worked example
A full cosine-guided secant period
You need one complete positive branch and one complete negative branch. Sketch y = sec x on − ≤ x ≤ using cosine as the guide.
Show the steps and the answer
- Draw the cosine guide using the cosine fntable visual.The starting heights appear directly below the angle inputs.
- Set to locate forbidden inputs: . Plug them back in: .These values make the secant denominator zero, so each is excluded and receives an asymptote.
- Keep (0, 1) and .Cosine has heights 1 and −1 there, and their reciprocals have the same values.
- Read the columns under and . Change each cosine height to secant height 2.The positive branch lies between − and , and these points guide its two sides.
- Read the columns under and . Change each cosine height to secant height .The negative branch lies between and , and both support points remain negative. = π − , so vertical-axis reflection reverses cosine. = − + 2π; reflection across the horizontal axis and a full turn both keep that cosine.
- Draw an upward-opening curved branch centered at 0 and a downward-opening curved branch centered at .Near either boundary the cosine height approaches zero with the branch's sign, so the reciprocal moves away from the x-axis without bound.
- Asymptotes in the interval: x = −, , .
- Positive branch: − < x < , vertex (0, 1).
- Negative branch: < x < , vertex (π, −1).
- The interval length and the repeating pattern are 2π.
The trap
secant uses cosine zeros, which lie at odd multiples of . Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.
Quick check
Try it before you open its steps. It is question 2 of 3 in the full lesson, where they run from easy to exam-hard.
Try it · level 2 of 3
The negative branch at and beside its vertex
You need the negative branch's central height and one neighboring height. Evaluate sec π and sec().
Show the steps and the answer
- Use and .The unit-circle horizontal coordinates at 180° and 120° give these exact cosine values.
- Compute .The reciprocal of −1 is −1, locating the negative vertex.
- Compute .Dividing one by a negative half gives a negative output of magnitude 2.
- Plot and below the x-axis.Both inputs lie in the cosine-negative interval (, ), so their secant heights are negative.
- sec π = −1.
- sec() = −2.
9 Read, sketch and remember all four graphs
The rule
for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote.
Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.
How
- Write the quotient or reciprocal formula.
- Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.
- Plot the known key points within each allowed branch.
- Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.
- Repeat by the fundamental period and check the even or odd symmetry and the range.
Worked example
Worked example
Secant: the upward branch through (2π, 1) and its neighbor
Graph the branch of y = sec x that passes through the point (2π, 1), then sketch the neighboring downward branch through (3π, −1). Extend the graph using the period and the even symmetry of secant, and state the range. The three-column table gives exact values on the first branch: sec() = , sec(2π) = 1 and sec() = . The table lists each input as a multiple of π, so 1.75, 2 and 2.25 stand for , 2π and , and it shows rounded to 1.414.
Show the steps and the answer
- Write secant as a reciprocal formula: .Secant is the reciprocal of cosine, so each output is 1 divided by cos x. The formula has a value only where its denominator cos x is not 0.
- Set the denominator equal to 0: gives for any integer k. The two zeros on either side of are and . Substitute them back: , and .A denominator-zero input is excluded. Just beside it cos x is close to 0, so grows without bound, which makes each such vertical line a vertical asymptote. Consecutive zeros are π apart, so no other asymptote lies between and , and these two lines bound the branch through (2π, 1).
- Find the allowed outputs of this branch. For , the angle is between and , so . Therefore , and only where , which is at .The reciprocal of a positive number no greater than 1 is at least 1. So every point of this branch must lie on or above the line y = 1, and the branch opens upward.
- Verify and plot the table points. gives . gives . gives . Plot and , at , 5.50 and 7.07.Each plotted point must agree with sec x = and with the allowed outputs y ≥ 1. The two points sit either side of 2π at the same height, so the branch is symmetric about the line x = 2π.
- Draw the upward U. Start high beside , fall through to the lowest point , rise through , and climb beside without ever touching either asymptote.From x = to x = 2π, cos x increases from 0 to 1, so its reciprocal falls from unbounded values down to 1. From x = 2π to x = , cos x decreases from 1 toward 0, so sec x increases without bound. Near both asymptotes cos x approaches 0 through positive values, so the outputs head to +∞.
- Sketch the neighboring branch. The next zero of cos x is , since . For . gives . gives . Draw a downward U between and through , the highest point , and .The reciprocal of a negative number between −1 and 0 is at most −1, so this branch lies on or below y = −1. Near its asymptotes cos x approaches 0 through negative values, so the outputs fall without bound.
- Repeat by the fundamental period . The window from to holds one upward and one downward branch, and copies of it shifted by , … in both directions give the whole graph. For example, shifting the first branch left by gives the upward branch between and through , (0, 1) and . For integers k, the asymptotes are , the lowest points of the upward branches are , and the highest points of the downward branches are .cos(x + 2π) = cos x, so sec(x + 2π) = sec x and every point (x, y) repeats at (x + 2π, y). The period is 2π and not π because sec(x + π) = −sec x, so a shift of π carries an upward branch onto a downward one.
- Check the even symmetry. , so the graph is symmetric about the y-axis. The mirror image of is , and gives . The period gives the same value: , and .Even symmetry pairs each point (x, y) with (−x, y). The paired point agrees with both the formula and the period, so the extended graph is consistent. The copy through (0, 1) is its own mirror image.
- State the range. Wherever sec x is defined, either , giving (the upward branches), or , giving (the downward branches). The range is .cos x always lies between −1 and 1, so no output of sec x lies strictly between −1 and 1. The values 1 and −1 are reached at x = 2π and x = 3π, and the branches climb or fall without bound near the asymptotes.
Work to write
- sec x =
- cos x = 0 gives x = + kπ; check: cos() = 0 and cos() = 0
- Vertical asymptotes of the branch: x = and x =
- sec(2π) = 1, sec() = = , sec() =
- Upward U with lowest point (2π, 1); sec x ≥ 1 on this branch
- Downward U between x = and x = with highest point (3π, −1)
- Period 2π: sec(x + 2π) = sec x; asymptotes x = + kπ
- Even: sec(−x) = sec x, so sec(−) =
- Range: (−∞, −1] ∪ [1, ∞)
The trap
Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.
10 Quick checks for the whole unit
Quick check 1 of 8
Where are the vertical asymptotes of y = cot x?
Show the steps and the answer
Quick check 2 of 8
Which of the four functions are odd?
Show the steps and the answer
- Tangent, cotangent and cosecant. Each reverses its output when the input changes sign
- secant keeps the output and is even.
Quick check 3 of 8
What is the range of y = sec x?
Show the steps and the answer
Quick check 4 of 8
Why does y = tan x have no amplitude?
Show the steps and the answer
Quick check 5 of 8
Is cot() zero or undefined?
Show the steps and the answer
Quick check 6 of 8
What does a vertical asymptote tell you?
Show the steps and the answer
Quick check 7 of 8
What are the fundamental periods of tangent and cosecant?
Show the steps and the answer
- Tangent: π, because two coordinate sign changes cancel.
- Cosecant: 2π, because one denominator sign change after π reverses its output.
Quick check 8 of 8
Does secant's range include −1? Does it include 0?
Show the steps and the answer
- −1 is included because sec π = −1.
- 0 is excluded because a nonzero cosine reciprocal cannot equal zero.