Graphs of sine and cosine — quick review
1. Turn a circle's height into the sine graph
Picture a dot riding around a circular wheel with radius 1.
Rule: For y = sin x: Domain is all real numbers; Range is [−1, 1]; the graph is Continuous.
Period (T) = 2π; sin(x + 2kπ) = sin x for any Integer k; sin(−x) = −sin x.
1. Treat x as the Input, also called the Independent variable, and y = sin x as the Output, also called the Dependent variable. The output depends on which input you choose.
2. Use radians on the horizontal axis. On a Unit circle, a Radian input has the same numerical value as signed rim distance along the circle. Ordinary traveled Arc length equals the input's magnitude. The Central angle is the turn at the center.
3. Read each column of the value table: its top entry is x and its bottom entry is sin x. Point plotting means putting the Ordered pair (x, sin x) on the Graph in the xy-plane.
4. Locate the five Key points (0, 0), (, 1), (π, 0), (, −1), and (2π, 0). They record the start, top, middle, bottom, and return. A Key point is an anchor at a quarter-cycle position; five such anchors divide a cycle into four gaps. A quarter turn is one fourth of a full turn. A peak is a top height and a valley, also called a trough, is a bottom height.
5. Draw a smooth curve through the points. An Intercept is a crossing or touching of an axis; here x = 0, π, and 2π give output 0.
6. Continue the same pattern left and right. One Cycle has horizontal length 2π, because a full circle lap repeats the entire height record.
A point P starts at (1, 0) on the unit circle. For an input x in radians, P travels a rim distance equal to the magnitude of x, counterclockwise when x > 0 and clockwise when x < 0. The output y = sin x is the height (y-coordinate) of the point where P stops. The figure marks P after a counterclockwise quarter turn of 90°, at (0, 1). (a) For x = −2π, −, −π, − and 0, find where P stops and make a value table of sin x. (b) Plot the ordered pairs (x, sin x), using π ≈ 3.14 to place the inputs, and draw one cycle of y = sin x on [−2π, 0]. Name its intercepts, its peak and its valley. (c) Continue the pattern to find sin(), and state the domain and range of y = sin x.
(a) For x = −2π, −, −π, − and 0, P stops at (1, 0), (0, 1), (−1, 0), (0, −1) and (1, 0). The value table is x: −2π, −, −π, −, 0 with sin x: 0, 1, 0, −1, 0. (b) The cycle is a smooth curve through (−2π, 0), (−, 1), (−π, 0), (−, −1) and (0, 0). Its intercepts are at x = −2π, −π and 0, its peak is (−, 1) and its valley is (−, −1). (c) sin() = 1. The domain is all real numbers and the range is [−1, 1].
Do not turn the exact radian input into a degree input of °. It means a quarter turn, or 90°. The decimal 1.57 is only a rounded label for that exact input.
Confirm that the horizontal inputs are radians.
Read down each input column to get its sine height.
Plot the five quarter-turn points first, then the intermediate source points.
Connect smoothly and repeat by adding or subtracting 2π from inputs.
Use one angle unit for both inputs. If needed, add or subtract whole turns to locate their positions on the first cycle.
Mark both positions on the same circle or sine graph. Identify the rising or falling interval that contains them.
On one increasing interval, keep the input order for the outputs. On one decreasing interval, reverse the order for the outputs.
If the inputs cross a top or bottom, compare the actual circle heights. Equal tilts on opposite sides of the vertical axis give equal sine heights.
Write the comparison of the sine outputs and explain which picture fact supports it.
Sine
Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.
Input
Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.
Independent variable
Pronounced in-duh-PEN-dunt VAIR-ee-uh-bul. The variable you choose first, usually x; its value is the function's input.
Output
Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.
Dependent variable
Pronounced dih-PEN-dunt VAIR-ee-uh-bul. The variable determined by the input through the function, usually y.
xy-plane
Pronounced eks-why plane. The flat coordinate plane formed by a horizontal x-axis and a vertical y-axis.
Coordinate
Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.
Ordered pair
Pronounced OR-derd pair. Two coordinates written as (x, y), horizontal first and vertical second.
Graph
Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.
y-axis
Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.
Origin
Pronounced OR-ih-jin. The point (0, 0) where the axes meet.
Radian
Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.
Real number
Pronounced REE-ul NUM-ber. Any point on the number line, including integers, fractions, and numbers such as π.
Unit circle
Pronounced YOO-nit SUR-kul. The circle centered at the origin with radius 1; its point after angle θ is (cos θ, sin θ).
Arc length
Pronounced ark length. Distance measured along part of a circle's curved rim.
Central angle
Pronounced SEN-trul ANG-gul. An angle whose vertex is at the circle's center and whose sides meet the circle.
Domain
Pronounced doh-MAYN. All allowed inputs of a function.
Range
Pronounced raynj. All output values a function actually reaches.
Continuous
Pronounced kun-TIN-yoo-us. A graph without gaps, breaks or jumps; small changes in input produce small changes in output.
Periodic function
Pronounced peer-ee-OD-ik FUNK-shun. A function with a positive repeat distance p such that f(x + p) = f(x) for every input.
Period (T)
Pronounced PEER-ee-ud tee. The smallest positive horizontal repeat distance of a nonconstant sine or cosine wave.
Cycle
Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.
Integer
Pronounced IN-tuh-jer. A whole-number count that can be positive, negative or zero; no fractional part.
Odd function
Pronounced od FUNK-shun. A function satisfying f(−x) = −f(x); changing the input sign changes the output sign.
Symmetry
Pronounced SIM-uh-tree. A flip or turn that makes a figure match itself.
Symmetry about the origin
Pronounced SIM-uh-tree uh-BOUT thee OR-ih-jin. Every graph point (x, y) has a matching point (−x, −y). A half turn about (0, 0) preserves the graph.
With respect to
Pronounced with ree-SPEKT too. Relative to the named object or viewpoint; abbreviated w.r.t. in the notes.
A
Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.
Absolute value
Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.
Reflection
Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.
Point plotting
Pronounced point PLOT-ing. Finding input-output pairs, placing their points, and using the function's shape to connect them.
Key points
Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.
Intercept
Pronounced IN-ter-sept. A point where a graph meets an axis. An x-intercept has y = 0; a y-intercept has x = 0.
Interval
Pronounced IN-ter-vul. A connected stretch of a number line, with notation indicating whether its endpoints are included.
Fundamental period
Pronounced fun-duh-MEN-tul PEER-ee-ud. The smallest positive repeat distance; this is what period means for the nonconstant waves here.
Quarter turn
Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or radians.
Quadrant
Pronounced KWOD-runt. One of the four regions made by the coordinate axes, numbered counterclockwise from the upper right.
Reference angle
Pronounced REF-er-uns ANG-gul. The acute angle between an angle's terminal ray and the nearest horizontal axis; it helps find coordinate magnitudes.
Clockwise
Pronounced KLOK-wise. Turning in the direction a clock's hands move; from the rightmost circle point, the first motion is downward.
Counterclockwise
Pronounced kown-ter-KLOK-wise. Turning opposite a clock's hands; from the rightmost circle point, the first motion is upward.
Increasing
Pronounced in-KREE-sing. A graph rises as its input moves right through the interval being discussed.
Decreasing
Pronounced dee-KREE-sing. A graph falls as its input moves right through the interval being discussed.
Degree
Pronounced duh-GREE. An angle unit defined by convention as one of 360 equal parts of a full turn. The ° sign distinguishes degrees from radians.
Radius
Pronounced RAY-dee-us. The distance from a circle's center to its rim.
Ray
Pronounced ray. A line starting at one endpoint and extending forever in one direction.
Denominator
Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.
2. A changes height: amplitude, stretch, compression, reflection
Picture the wheel rider's height record printed on stretchy paper.
Rule: For y = A sin x: Amplitude = |A| = ; Midline is y = 0; Range is [−|A|, |A|].
|A| > 1 stretches vertically; 0 < |A| < 1 compresses vertically; A < 0 reflects across the x-axis. For A ≠ 0, T = 2π.
1. Find A, the Constant multiplying sine on the outside. In −3 sin x, A = −3; in sin x, the invisible coefficient is A = 1.
2. Compute |A| by keeping its size and removing its minus sign. This is the Amplitude, never a negative distance.
3. Compare |A| with 1 to decide whether there is a Vertical stretch, a Vertical compression, or unchanged height. A negative sign adds a Reflection.
4. Multiply each original sine output by A. The input coordinates stay fixed because this is an outside multiplication.
5. Write the Midline y = 0 and Range [−|A|, |A|]. Maximum and Minimum mean highest and lowest outputs; a Local maximum or Local minimum is a peak or valley compared with nearby points.
6. If you are given extreme heights, subtract minimum from maximum and divide by 2. The source waves are centered at zero; do not mistake the entire top-to-bottom distance for the amplitude.
7. If A = 0, every output is 0. Draw the constant graph y = 0 and do not assign a smallest positive period.
A designer cuts a wavy edge for a paper border. On the design grid 1 unit = 1 cm, x is the distance along the strip, and y is the height above the strip's center line y = 0 (negative y means below the line). The template edge is y = sin x, which passes through the five points (0, 0), (, 1), (π, 0), (, −1) and (2π, 0). In the figure these x-values are plotted as the decimals 0, 1.57, 3.14, 4.71 and 6.28. To get a shallower wave that dips below the center line first, the designer switches to the edge y = −0.6 sin x. (a) Writing the new edge as y = A sin x, name A and find the amplitude. (b) Decide whether the height is stretched, compressed or unchanged, and whether the edge is reflected. (c) Find the point of the new edge at each of the five x-values. (d) Give the midline, the maximum and the minimum height and where each occurs for 0 ≤ x ≤ 2π, the range, and the period. (e) A coworker measures 1.2 cm from the highest point of the new edge to its lowest point and says the amplitude is 1.2 cm. Explain the mistake and find the amplitude from the extreme heights.
(a) A = −0.6 and the amplitude is 0.6 cm. (b) Vertical compression, since 0 < 0.6 < 1, and a reflection across the x-axis, since A < 0. (c) (0, 0), (, −0.6), (π, 0), (, 0.6), (2π, 0). (d) Midline y = 0; maximum 0.6 at x = ; minimum −0.6 at x = ; range [−0.6, 0.6]; period T = 2π. (e) 1.2 cm is maximum − minimum, the full height of the wave; the amplitude is = 0.6 cm.
A = −3 is a signed coefficient, but Amplitude = |−3| = 3 is a distance. The minus sign describes reflection, not a negative amplitude. The unshifted Midline is y = 0, the x-axis; x = 0 is a vertical line.
Read A outside sine.
Take |A| for amplitude.
Use |A| to decide stretch or compression. A negative sign tells you the heights will also reflect when you multiply by signed A in the next step.
Multiply the original outputs by the signed A exactly once and retain the same inputs. This one multiplication already includes any reflection.
Check the extreme heights and the range.
Sine
Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.
Input
Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.
Output
Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.
Coordinate
Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.
Graph
Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.
x-axis
Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.
y-axis
Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.
Range
Pronounced raynj. All output values a function actually reaches.
Cycle
Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.
Constant
Pronounced KON-stunt. A quantity that stays fixed while the input changes.
A
Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.
Absolute value
Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.
Amplitude
Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.
Midline
Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.
Maximum
Pronounced MAK-sih-mum. The largest output reached by a function in the set being considered.
Minimum
Pronounced MIN-ih-mum. The smallest output reached by a function in the set being considered.
Local maximum
Pronounced LOH-kul MAK-sih-mum. A peak whose output is at least as high as nearby outputs. These sine and cosine peaks also reach the whole wave's maximum.
Local minimum
Pronounced LOH-kul MIN-ih-mum. A trough whose output is at least as low as nearby outputs. These sine and cosine troughs also reach the whole wave's minimum.
Vertical stretch or compression
Pronounced VER-tih-kul strech or kum-PRESH-un. Multiplying all outputs by A changes their distances from the midline by the factor |A|.
Vertical stretch
Pronounced VER-tih-kul strech. Multiplying outputs by a coefficient of size greater than 1 moves points farther from the midline.
Vertical compression
Pronounced VER-tih-kul kum-PRESH-un. Multiplying outputs by a nonzero coefficient of size less than 1 moves points closer to the midline.
Reflection
Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.
Key points
Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.
Coefficient
Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.
Ratio
Pronounced RAY-shee-oh. One quantity divided by another, comparing their sizes.
Interval
Pronounced IN-ter-vul. A connected stretch of a number line, with notation indicating whether its endpoints are included.
Opposite side
Pronounced OP-uh-zit side. The right triangle leg across from the acute angle you chose; it does not touch that angle.
Numerator
Pronounced NOO-muh-ray-ter. The top of a fraction.
Denominator
Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.
3. Omega changes width: derive the period
Imagine recording the same wheel rider while changing how quickly the rider moves around the circle.
Rule: For y = A sin(ωx), with A ≠ 0 and ω ≠ 0: T = and |ω| = .
|ω| > 1 compresses horizontally; 0 < |ω| < 1 stretches horizontally; ω < 0 reverses the input direction. A = 0 or ω = 0 gives a constant graph without a smallest positive period.
1. Read ω, the entire coefficient multiplying x inside sine. In sin(2x), ω = 2; in sin(x), ω = ; in sin(5πx), ω = 5π.
2. Check A ≠ 0 and ω ≠ 0 before calling the graph a nonconstant wave.
3. Take |ω| to remove direction. Period (T) measures a positive horizontal length.
4. Compute T = 2π ÷ |ω|. Divide by a fraction by multiplying by its reciprocal. Cancel π only when it is a common factor of the full numerator and denominator.
5. Compare |ω| with 1. Larger than 1 means Horizontal compression; between 0 and 1 means Horizontal stretch; equal to 1 keeps the original width.
6. Check by multiplying the proposed period by |ω|. The product must be 2π, exactly one inside lap.
7. If a graph gives T and you need ω, use |ω| = . Choosing ω > 0 gives the convenient representative ω = ; period alone does not determine its sign.
A wind turbine's blades turn at a steady rate. One blade is 42 m long from the center of the hub to its tip. At time x = 0 seconds that tip is level with the hub's center and moving upward. Its height above the hub's center, in meters, is modeled by y = 42 sin(x). The sine input u = x is the angle, in radians, that the blades have turned. The figure graphs u (vertical axis) against x as a straight line through (0, 0) and (9, 4π). (a) Find the period T of the tip's height, say whether the graph is a horizontal compression or a horizontal stretch of y = 42 sin x, and check T. (b) In lighter wind the rotor slows until one full turn takes 7 seconds, and the tip again starts level with the hub's center and moving upward. Find ω for the new model y = 42 sin(ωx), and say whether its graph is a horizontal compression or stretch of y = 42 sin x.
(a) T = = 4.5 seconds; |ω| = ≈ 1.40 > 1, so the graph is a horizontal compression of y = 42 sin x. (b) ω = ≈ 0.90, giving y = 42 sin(x), a horizontal stretch of y = 42 sin x.
The inside multiplier is not the period. For sin(2x), ω = 2 but T = π. Divide 2π by |ω|. A negative ω also gives a positive period because width is a distance, not a direction.
Identify the entire inside coefficient ω.
Check that A and ω are nonzero.
Take |ω| and divide 2π by it.
Reduce fractions and common factors.
Multiply |ω| by the proposed T to check for one full turn 2π.
Sine
Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.
Input
Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.
Output
Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.
Graph
Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.
x-axis
Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.
y-axis
Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.
Radian
Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.
Real number
Pronounced REE-ul NUM-ber. Any point on the number line, including integers, fractions, and numbers such as π.
Period (T)
Pronounced PEER-ee-ud tee. The smallest positive horizontal repeat distance of a nonconstant sine or cosine wave.
Cycle
Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.
Constant
Pronounced KON-stunt. A quantity that stays fixed while the input changes.
A
Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.
Absolute value
Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.
Amplitude
Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.
Midline
Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.
Horizontal stretch
Pronounced hor-ih-ZON-tul strech. An inside coefficient with 0 < |ω| < 1 lengthens the period beyond 2π.
Horizontal compression
Pronounced hor-ih-ZON-tul kum-PRESH-un. An inside coefficient with |ω| > 1 shortens the period below 2π.
Reflection
Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.
Identity
Pronounced eye-DEN-tih-tee. An equation true for every input where its two sides are defined.
Undefined
Pronounced un-dih-FYND. Having no assigned value, such as when a function's formula would require division by zero.
Coefficient
Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.
Reciprocal
Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.
Quarter turn
Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or radians.
Increasing
Pronounced in-KREE-sing. A graph rises as its input moves right through the interval being discussed.
Numerator
Pronounced NOO-muh-ray-ter. The top of a fraction.
Denominator
Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.
4. Read A and omega before doing arithmetic
Picture a music player with two separate knobs.
Rule: For y = A sin(ωx), with A ≠ 0 and ω ≠ 0, amplitude = |A| and T = . A is outside sine; ω multiplies x inside sine.
1. Write any missing coefficient: −sin(...) means −1 × sin(...), and sin x means 1 × sin(1x).
2. Copy A from outside sine and the entire ω from the factor multiplying x inside. Keep their signs here.
3. Use |A| for amplitude and |ω| for the period calculation.
4. Calculate T = 2π ÷ |ω|. Dividing by a fraction multiplies by its reciprocal, meaning its upside down version.
5. Put T back into |ω|T = 2π to check the complete turn. The range is [−|A|, |A|].
Name A and ω before arithmetic.
Use |A| for amplitude and 2π ÷ |ω| for period.
Multiply |ω| by the proposed T to recover 2π.
A marker buoy rides long ocean swells. Its height above its calm-water level, in meters, x seconds after a lifeguard starts a stopwatch, is modeled by y = −sin(). A negative y means the buoy is below calm-water level. Match the model to y = A sin(ωx) and state A and ω before doing any arithmetic. Then find the amplitude, the period T (the time for one complete cycle) and the range of the buoy's heights.
A = −1 and ω = . Amplitude = 1 m, period T = 5π s ≈ 15.7 s, range [−1, 1]. The buoy's height stays between 1 m below and 1 m above calm-water level.
Using the outside number as period, or treating π as decoration inside sine. Copy A and the entire ω before applying their separate formulas.
Sine
Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.
Input
Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.
Output
Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.
Graph
Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.
x-axis
Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.
Origin
Pronounced OR-ih-jin. The point (0, 0) where the axes meet.
Radian
Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.
Range
Pronounced raynj. All output values a function actually reaches.
Cycle
Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.
Symmetry
Pronounced SIM-uh-tree. A flip or turn that makes a figure match itself.
Constant
Pronounced KON-stunt. A quantity that stays fixed while the input changes.
A
Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.
ω (omega)
Pronounced oh-MAY-guh. The inside coefficient multiplying x. Its size controls how quickly the angle changes and therefore how wide a cycle is.
Absolute value
Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.
Amplitude
Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.
Midline
Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.
Horizontal stretch
Pronounced hor-ih-ZON-tul strech. An inside coefficient with 0 < |ω| < 1 lengthens the period beyond 2π.
Reflection
Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.
Coefficient
Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.
Reciprocal
Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.
Substitution
Pronounced sub-stih-TOO-shun. Replacing a letter by a specific value in an equation or expression.
Fundamental period
Pronounced fun-duh-MEN-tul PEER-ee-ud. The smallest positive repeat distance; this is what period means for the nonconstant waves here.
5. Cofunctions: change the partner and subtract the angle
Imagine looking at the same ladder from its two pointed corners.
Rule: Wherever both sides are defined: sin x = cos( − x), cos x = sin( − x), tan x = cot( − x), cot x = tan( − x), sec x = csc( − x), and csc x = sec( − x). For degree angles, replace with 90° throughout.
1. Choose the partner: sine with cosine, tangent with cotangent, or secant with cosecant.
2. Use 90° for degree angles and for radian angles.
3. Subtract the old angle from that quarter turn. For radian fractions, make the denominators match first.
4. Write the partner at the resulting angle. Keep any negative result.
5. Add the old and new arguments to check their quarter turn sum. Check that both functions are defined.
Choose the function's partner.
Subtract the old angle from the quarter turn in the same unit.
Keep the sign, check the sum, and check the denominator.
The figure shows the angle radians, which is 144°, in standard position. Use a cofunction identity to rewrite sec() as the cosecant of a single angle in radians. Write that angle as a fraction of π in lowest terms. Show the subtraction with matching denominators. Then check that the old and new angles add to a quarter turn and that both functions are defined.
sec() = csc(−)
Changing the function name but keeping the old angle, or subtracting radians from 90°. Change name and argument, using one angle unit throughout.
Sine
Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.
Cosine
Pronounced KOH-syne. The sideways coordinate of a point on the unit circle; its graph begins at the top and falls for small positive inputs.
Coordinate
Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.
x-axis
Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.
y-axis
Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.
Radian
Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.
Unit circle
Pronounced YOO-nit SUR-kul. The circle centered at the origin with radius 1; its point after angle θ is (cos θ, sin θ).
A
Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.
Reflection
Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.
Cofunctions
Pronounced KOH-funk-shunz. The partner pairs sine/cosine, tangent/cotangent, and secant/cosecant; each matches its partner at the quarter-turn-minus-angle argument where defined.
Complementary angles
Pronounced kom-pluh-MEN-tuh-ree ANG-gulz. Two angles whose measures add to 90°, or radians. A cofunction argument can be negative beyond the acute-angle picture.
Tangent
Pronounced TAN-junt. Sine divided by cosine where cosine is not zero; abbreviated tan.
Cotangent
Pronounced koh-TAN-junt. Cosine divided by sine where sine is not zero; abbreviated cot and paired with tangent as a cofunction.
Secant
Pronounced SEE-kant. One divided by cosine wherever cosine is not zero; abbreviated sec and paired with cosecant as a cofunction.
Cosecant
Pronounced koh-SEE-kant. One divided by sine wherever sine is not zero; abbreviated csc and paired with secant as a cofunction.
Identity
Pronounced eye-DEN-tih-tee. An equation true for every input where its two sides are defined.
Undefined
Pronounced un-dih-FYND. Having no assigned value, such as when a function's formula would require division by zero.
Reciprocal
Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.
Ratio
Pronounced RAY-shee-oh. One quantity divided by another, comparing their sizes.
Quarter turn
Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or radians.
Quadrant
Pronounced KWOD-runt. One of the four regions made by the coordinate axes, numbered counterclockwise from the upper right.
Right triangle
Pronounced rite TRY-ang-gul. A triangle with one 90° angle. Its other two angles together use the remaining 90°.
Hypotenuse
Pronounced hy-POT-uh-noos. The longest side of a right triangle, across from its 90° angle.
Clockwise
Pronounced KLOK-wise. Turning in the direction a clock's hands move; from the rightmost circle point, the first motion is downward.
Counterclockwise
Pronounced kown-ter-KLOK-wise. Turning opposite a clock's hands; from the rightmost circle point, the first motion is upward.
SOH CAH TOA
Pronounced soh kah toh-uh. A memory phrase for sine as opposite over hypotenuse, cosine as adjacent over hypotenuse, and tangent as opposite over adjacent.
Degree
Pronounced duh-GREE. An angle unit defined by convention as one of 360 equal parts of a full turn. The ° sign distinguishes degrees from radians.
Terminal side
Pronounced TER-mih-nul side. The ray where an angle's turn finishes.
Numerator
Pronounced NOO-muh-ray-ter. The top of a fraction.
Denominator
Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.
Rationalizing
Pronounced RASH-uh-nuh-ly-zing. Rewriting an equivalent fraction to remove a square root from its denominator.
7. Sketch a complete cycle with five key points
Imagine drawing one hill and one valley on a strip of wallpaper.
Rule: For A ≠ 0 and ω > 0, y = A sin(ωx) or y = A cos(ωx) has T = . Use the input columns 0, , , , T in the key-point picture. Multiply the parent heights by A, connect smoothly, and repeat every T.
1. Check A and ω for zero. If the graph is nonconstant and ω is negative, rewrite using sin(−u) = −sin u or cos(−u) = cos u to obtain positive ω. Then copy the resulting signed A and positive ω. Find amplitude |A| and T = .
2. Divide T by 4 to find the quarter period. Put its successive multiples in an input/output table.
3. Use the sine or cosine parent heights and multiply each by A. The table is the point-plotting plan.
4. Draw each column as an ordered pair. Join the points smoothly, with rounded tops and bottoms.
5. If the requested interval spans several cycles, copy the points by adding or subtracting T from each input. Do not change their heights.
Sketch y = −4 sin(x) for 0 ≤ x ≤ 3π. This asks you to draw one whole wave, with its five key points, and state its amplitude and period.
Amplitude = 4
Period T = 3π
Quarter period =
One cycle begins at the middle going down and returns to the middle going down at x = 3π.
Trap: Drawing straight segments between the key points makes a zigzag. These points locate a smooth sinusoidal function, so round the turns and cross the middle smoothly.
Write A, ω, |A|, T, and .
Draw the five-column table using sine or cosine heights. Multiply each parent height by the signed A exactly once; a negative A already performs the reflection.
Plot the points and connect smoothly. Copy by T to cover the requested interval.
Sine
Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.
Cosine
Pronounced KOH-syne. The sideways coordinate of a point on the unit circle; its graph begins at the top and falls for small positive inputs.
Input
Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.
Output
Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.
Coordinate
Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.
Ordered pair
Pronounced OR-derd pair. Two coordinates written as (x, y), horizontal first and vertical second.
Graph
Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.
Origin
Pronounced OR-ih-jin. The point (0, 0) where the axes meet.
Radian
Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.
Unit circle
Pronounced YOO-nit SUR-kul. The circle centered at the origin with radius 1; its point after angle θ is (cos θ, sin θ).
Periodic function
Pronounced peer-ee-OD-ik FUNK-shun. A function with a positive repeat distance p such that f(x + p) = f(x) for every input.
Cycle
Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.
Integer
Pronounced IN-tuh-jer. A whole-number count that can be positive, negative or zero; no fractional part.
Constant
Pronounced KON-stunt. A quantity that stays fixed while the input changes.
A
Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.
Absolute value
Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.
Amplitude
Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.
Midline
Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.
Maximum
Pronounced MAK-sih-mum. The largest output reached by a function in the set being considered.
Minimum
Pronounced MIN-ih-mum. The smallest output reached by a function in the set being considered.
Reflection
Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.
Key points
Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.
Quarter period
Pronounced KWOR-ter PEER-ee-ud. One fourth of the full cycle's horizontal length, T ÷ 4.
Sinusoidal function
Pronounced sy-nuh-SOY-dul FUNK-shun. A function whose graph is a sine-shaped or cosine-shaped wave, including its stretches, reflections and shifts.
Exact value
Pronounced ig-ZAKT VAL-yoo. A value written without rounding, often as a fraction, π expression or square root.
Coefficient
Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.
Reciprocal
Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.
Interval
Pronounced IN-ter-vul. A connected stretch of a number line, with notation indicating whether its endpoints are included.
Substitution
Pronounced sub-stih-TOO-shun. Replacing a letter by a specific value in an equation or expression.
Denominator
Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.
8. Read a wave and write its equation
Imagine finding a label for a repeating wallpaper pattern.
Rule: For nonconstant y = A sin(ωx) or y = A cos(ωx), centered at y = 0 with ω > 0, amplitude a = and ω = . At x = 0: middle up chooses a sin; middle down chooses −a sin; top chooses a cos; bottom chooses −a cos.
1. Confirm that the midline is y = 0 and that the problem uses an unshifted sine or cosine wave. This is the family the four-start method identifies.
2. Find the amplitude from half the vertical span. It is positive for a changing wave.
3. At x = 0, choose sine or cosine and the sign of A from the starting height and direction. Set |A| equal to the amplitude.
4. Measure the horizontal distance from one point to the next matching point with the same direction. That distance is T.
5. Solve ωT = 2π by dividing both sides by T. Choose ω = > 0 and write the equation.
6. Substitute the five quarter-period inputs into the equation. Compare all five outputs with the graph, and verify ωT = 2π.
The pictured unshifted wave centered at y = 0 has a maximum of 8, a minimum of −8, a full cycle of 10, and is at the bottom at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Amplitude = 8
Period T = 10
ω =
y = −8 cos(x)
Trap: The four-start method assumes an unshifted wave centered at y = 0 and a positive ω. A wave with another midline or an arbitrary horizontal shift needs the later transformation method.
Confirm the family and y = 0 midline. Choose positive ω.
Measure amplitude, read the starting position and direction, and choose signed A with sine or cosine.
Measure one complete repeat T and calculate ω = .
Write the equation and check all five quarter-period points.
Sine
Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.
Cosine
Pronounced KOH-syne. The sideways coordinate of a point on the unit circle; its graph begins at the top and falls for small positive inputs.
Input
Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.
Output
Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.
Coordinate
Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.
Graph
Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.
y-axis
Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.
Origin
Pronounced OR-ih-jin. The point (0, 0) where the axes meet.
Radian
Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.
Domain
Pronounced doh-MAYN. All allowed inputs of a function.
Range
Pronounced raynj. All output values a function actually reaches.
Cycle
Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.
Symmetry
Pronounced SIM-uh-tree. A flip or turn that makes a figure match itself.
A
Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.
ω (omega)
Pronounced oh-MAY-guh. The inside coefficient multiplying x. Its size controls how quickly the angle changes and therefore how wide a cycle is.
Absolute value
Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.
Amplitude
Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.
Midline
Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.
Maximum
Pronounced MAK-sih-mum. The largest output reached by a function in the set being considered.
Minimum
Pronounced MIN-ih-mum. The smallest output reached by a function in the set being considered.
Reflection
Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.
Point plotting
Pronounced point PLOT-ing. Finding input-output pairs, placing their points, and using the function's shape to connect them.
Key points
Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.
Quarter period
Pronounced KWOR-ter PEER-ee-ud. One fourth of the full cycle's horizontal length, T ÷ 4.
Cofunction identities
Pronounced KOH-funk-shun eye-DEN-tih-teez. Equalities replacing a trig function by its cofunction at − x, or 90° − x, wherever both sides are defined.
Horizontal shift
Pronounced hor-ih-ZON-tul shift. Sliding a graph left or right without changing its shape or height.
Coefficient
Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.
Substitution
Pronounced sub-stih-TOO-shun. Replacing a letter by a specific value in an equation or expression.
Quarter turn
Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or radians.
Degree
Pronounced duh-GREE. An angle unit defined by convention as one of 360 equal parts of a full turn. The ° sign distinguishes degrees from radians.
Phase shift
Pronounced fayz shift. The horizontal displacement of a wave from its chosen parent graph.