Trigonometry / Graphs of sine and cosine
Graphs of sine and cosine
All 8 lessons, in order.
The unit at a glance
- 1. Turn a circle's height into the sine graph
Picture a dot riding around a circular wheel with radius 1.
- 2. A changes height: amplitude, stretch, compression, reflection
Picture the wheel rider's height record printed on stretchy paper.
- 3. Omega changes width: derive the period
Imagine recording the same wheel rider while changing how quickly the rider moves around the circle.
- 4. Read A and omega before doing arithmetic
Picture a music player with two separate knobs.
- 5. Cofunctions: change the partner and subtract the angle
Imagine looking at the same ladder from its two pointed corners.
- 6. Cosine starts at the top and shares the same wave shape
Picture the same wheel you used for sine, with its seat beginning at the far right.
- 7. Sketch a complete cycle with five key points
Imagine drawing one hill and one valley on a strip of wallpaper.
- 8. Read a wave and write its equation
Imagine finding a label for a repeating wallpaper pattern.
Rules (8)
- 1. Turn a circle's height into the sine graph
For y = sin x: Domain is all real numbers; Range is [−1, 1]; the graph is Continuous.
Period (T) = 2π; sin(x + 2kπ) = sin x for any Integer k; sin(−x) = −sin x. - 2. A changes height: amplitude, stretch, compression, reflection
For y = A sin x: Amplitude = |A| = ; Midline is y = 0; Range is [−|A|, |A|].
|A| > 1 stretches vertically; 0 < |A| < 1 compresses vertically; A < 0 reflects across the x-axis. For A ≠ 0, T = 2π. - 3. Omega changes width: derive the period
For y = A sin(ωx), with A ≠ 0 and ω ≠ 0: T = and |ω| = .
|ω| > 1 compresses horizontally; 0 < |ω| < 1 stretches horizontally; ω < 0 reverses the input direction. A = 0 or ω = 0 gives a constant graph without a smallest positive period. - 4. Read A and omega before doing arithmetic
For y = A sin(ωx), with A ≠ 0 and ω ≠ 0, amplitude = |A| and T = . A is outside sine; ω multiplies x inside sine.
- 5. Cofunctions: change the partner and subtract the angle
Wherever both sides are defined: sin x = cos( − x), cos x = sin( − x), tan x = cot( − x), cot x = tan( − x), sec x = csc( − x), and csc x = sec( − x). For degree angles, replace with 90° throughout.
- 6. Cosine starts at the top and shares the same wave shape
y = cos x has domain (−∞, ∞), range [−1, 1], period 2π, and cos(−x) = cos x. It begins at (0, 1). Also cos x = sin(x + ), a shift of sine left. For A cos(ωx), amplitude = |A| and T = when A ≠ 0 and ω ≠ 0.
- 7. Sketch a complete cycle with five key points
For A ≠ 0 and ω > 0, y = A sin(ωx) or y = A cos(ωx) has T = . Use the input columns 0, , , , T in the key-point picture. Multiply the parent heights by A, connect smoothly, and repeat every T.
- 8. Read a wave and write its equation
For nonconstant y = A sin(ωx) or y = A cos(ωx), centered at y = 0 with ω > 0, amplitude a = and ω = . At x = 0: middle up chooses a sin; middle down chooses −a sin; top chooses a cos; bottom chooses −a cos.
Recipes (8)
- 1. Turn a circle's height into the sine graph
- 1. Treat x as the Input, also called the Independent variable, and y = sin x as the Output, also called the Dependent variable. The output depends on which input you choose.
- 2. Use radians on the horizontal axis. On a Unit circle, a Radian input has the same numerical value as signed rim distance along the circle. Ordinary traveled Arc length equals the input's magnitude. The Central angle is the turn at the center.
- 3. Read each column of the value table: its top entry is x and its bottom entry is sin x. Point plotting means putting the Ordered pair (x, sin x) on the Graph in the xy-plane.
- 4. Locate the five Key points (0, 0), (, 1), (π, 0), (, −1), and (2π, 0). They record the start, top, middle, bottom, and return. A Key point is an anchor at a quarter-cycle position; five such anchors divide a cycle into four gaps. A quarter turn is one fourth of a full turn. A peak is a top height and a valley, also called a trough, is a bottom height.
- 5. Draw a smooth curve through the points. An Intercept is a crossing or touching of an axis; here x = 0, π, and 2π give output 0.
- 6. Continue the same pattern left and right. One Cycle has horizontal length 2π, because a full circle lap repeats the entire height record.
- 2. A changes height: amplitude, stretch, compression, reflection
- 1. Find A, the Constant multiplying sine on the outside. In −3 sin x, A = −3; in sin x, the invisible coefficient is A = 1.
- 2. Compute |A| by keeping its size and removing its minus sign. This is the Amplitude, never a negative distance.
- 3. Compare |A| with 1 to decide whether there is a Vertical stretch, a Vertical compression, or unchanged height. A negative sign adds a Reflection.
- 4. Multiply each original sine output by A. The input coordinates stay fixed because this is an outside multiplication.
- 5. Write the Midline y = 0 and Range [−|A|, |A|]. Maximum and Minimum mean highest and lowest outputs; a Local maximum or Local minimum is a peak or valley compared with nearby points.
- 6. If you are given extreme heights, subtract minimum from maximum and divide by 2. The source waves are centered at zero; do not mistake the entire top-to-bottom distance for the amplitude.
- 7. If A = 0, every output is 0. Draw the constant graph y = 0 and do not assign a smallest positive period.
- 3. Omega changes width: derive the period
- 1. Read ω, the entire coefficient multiplying x inside sine. In sin(2x), ω = 2; in sin(x), ω = ; in sin(5πx), ω = 5π.
- 2. Check A ≠ 0 and ω ≠ 0 before calling the graph a nonconstant wave.
- 3. Take |ω| to remove direction. Period (T) measures a positive horizontal length.
- 4. Compute T = 2π ÷ |ω|. Divide by a fraction by multiplying by its reciprocal. Cancel π only when it is a common factor of the full numerator and denominator.
- 5. Compare |ω| with 1. Larger than 1 means Horizontal compression; between 0 and 1 means Horizontal stretch; equal to 1 keeps the original width.
- 6. Check by multiplying the proposed period by |ω|. The product must be 2π, exactly one inside lap.
- 7. If a graph gives T and you need ω, use |ω| = . Choosing ω > 0 gives the convenient representative ω = ; period alone does not determine its sign.
- 4. Read A and omega before doing arithmetic
- 1. Write any missing coefficient: −sin(...) means −1 × sin(...), and sin x means 1 × sin(1x).
- 2. Copy A from outside sine and the entire ω from the factor multiplying x inside. Keep their signs here.
- 3. Use |A| for amplitude and |ω| for the period calculation.
- 4. Calculate T = 2π ÷ |ω|. Dividing by a fraction multiplies by its reciprocal, meaning its upside down version.
- 5. Put T back into |ω|T = 2π to check the complete turn. The range is [−|A|, |A|].
- 5. Cofunctions: change the partner and subtract the angle
- 1. Choose the partner: sine with cosine, tangent with cotangent, or secant with cosecant.
- 2. Use 90° for degree angles and for radian angles.
- 3. Subtract the old angle from that quarter turn. For radian fractions, make the denominators match first.
- 4. Write the partner at the resulting angle. Keep any negative result.
- 5. Add the old and new arguments to check their quarter turn sum. Check that both functions are defined.
- 6. Cosine starts at the top and shares the same wave shape
- 1. Start the parent cosine graph at (0, 1), then read the unit circle's horizontal coordinate at each quarter turn.
- 2. For A cos(ωx), read the outside A and inside ω as for sine. Use |A| for amplitude and 2π ÷ |ω| for period.
- 3. Keep midline y = 0 and range [−|A|, |A|]. A negative A changes the start from the top to the bottom.
- 4. Compare opposite inputs using cos(−u) = cos u. Equal outputs give symmetry about the y-axis. An Even function has equal outputs at opposite inputs. Symmetry about the y-axis means (x, y) matches (−x, y), so the left and right halves mirror each other.
- 5. To compare with sine, use cos x = sin(x + ). Each old sine feature occurs earlier, so the graph moves left.
- 7. Sketch a complete cycle with five key points
- 1. Check A and ω for zero. If the graph is nonconstant and ω is negative, rewrite using sin(−u) = −sin u or cos(−u) = cos u to obtain positive ω. Then copy the resulting signed A and positive ω. Find amplitude |A| and T = .
- 2. Divide T by 4 to find the quarter period. Put its successive multiples in an input/output table.
- 3. Use the sine or cosine parent heights and multiply each by A. The table is the point-plotting plan.
- 4. Draw each column as an ordered pair. Join the points smoothly, with rounded tops and bottoms.
- 5. If the requested interval spans several cycles, copy the points by adding or subtracting T from each input. Do not change their heights.
- 8. Read a wave and write its equation
- 1. Confirm that the midline is y = 0 and that the problem uses an unshifted sine or cosine wave. This is the family the four-start method identifies.
- 2. Find the amplitude from half the vertical span. It is positive for a changing wave.
- 3. At x = 0, choose sine or cosine and the sign of A from the starting height and direction. Set |A| equal to the amplitude.
- 4. Measure the horizontal distance from one point to the next matching point with the same direction. That distance is T.
- 5. Solve ωT = 2π by dividing both sides by T. Choose ω = > 0 and write the equation.
- 6. Substitute the five quarter-period inputs into the equation. Compare all five outputs with the graph, and verify ωT = 2π.
Traps (8)
- 1. Turn a circle's height into the sine graph
Do not turn the exact radian input into a degree input of °. It means a quarter turn, or 90°. The decimal 1.57 is only a rounded label for that exact input.
- 2. A changes height: amplitude, stretch, compression, reflection
A = −3 is a signed coefficient, but Amplitude = |−3| = 3 is a distance. The minus sign describes reflection, not a negative amplitude. The unshifted Midline is y = 0, the x-axis; x = 0 is a vertical line.
- 3. Omega changes width: derive the period
The inside multiplier is not the period. For sin(2x), ω = 2 but T = π. Divide 2π by |ω|. A negative ω also gives a positive period because width is a distance, not a direction.
- 4. Read A and omega before doing arithmetic
Using the outside number as period, or treating π as decoration inside sine. Copy A and the entire ω before applying their separate formulas.
- 5. Cofunctions: change the partner and subtract the angle
Changing the function name but keeping the old angle, or subtracting radians from 90°. Change name and argument, using one angle unit throughout.
- 6. Cosine starts at the top and shares the same wave shape
Starting cosine at the origin, or confusing cos(−x) with −cos x. Cosine starts at (0, 1). Changing its input sign leaves output unchanged, while an outside minus reflects its heights.
- 7. Sketch a complete cycle with five key points
Drawing straight segments between the key points makes a zigzag. These points locate a smooth sinusoidal function, so round the turns and cross the middle smoothly.
- 8. Read a wave and write its equation
The four-start method assumes an unshifted wave centered at y = 0 and a positive ω. A wave with another midline or an arbitrary horizontal shift needs the later transformation method.
Lesson 1 of 8
1. Turn a circle's height into the sine graph
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a dot riding around a circular wheel with radius 1. You watch how high the dot sits above or below the wheel's center. Start at the right edge. The dot begins at height 0, rises to 1, returns to 0, drops to −1, and returns to 0 again. Now unroll your record onto a page: distance traveled around the circle goes across, and height goes up or down. That record is the sine graph. Its input x measures the turn in radians. Its output y is the dot's height. You draw each input and output together as a point (x, y).
Explain it like I am five
Picture a Ferris wheel of radius 1. A rider boards on the right, level with the hub (the center), and the wheel turns counterclockwise by an amount x. Track the rider's height: + above the hub, − below. The height is the second number of the rider's point, the y-coordinate, and on this wheel it equals sin x, said "sine of x".
Follow one lap, measuring x in radians, where π (pi, about 3.14) is half a turn. At x = 0 the height is 0. A quarter turn later, at x = (about 1.57), the rider is at the top: 1. At x = π, level again: 0. At x = , the bottom: −1. At x = 2π, back at the start: 0.
Now unroll the record. Plot (0, 0), (, 1), (π, 0), (, −1) and (2π, 0), and join them with a smooth curve: that is the sine graph. It stays between −1 and 1, because the rider never leaves the wheel, and it repeats every 2π, because every lap is the same trip.
2 Picture it
Reminder
Reminder: Input and output coordinates, Radians and the unit circle, Special-angle exact values, Sign of a circle height, Common denominators, Exact and rounded numbers, Domain and range notation
- Input and output coordinates. At input , sine gives output 1, so the graph point is (, 1). Input goes first in (x, y).
- Radians and the unit circle. One full turn is 2π radians, so a quarter turn is = radians, or 90°. On radius 1, radian input equals signed rim distance; ordinary traveled arc length equals its magnitude.
- Special-angle exact values. At 30°, or , the circle height is ; at 45°, or , it is ; at 60°, or , it is .
- Sign of a circle height. Above the horizontal axis sine is positive; below it sine is negative. Thus sin() = −.
- Common denominators. 2π = , so − 2π = by subtracting the numerators.
- Exact and rounded numbers. ≈ 0.71. The ≈ sign says the decimal is rounded; the fraction with the root stays exact.
- Domain and range notation. (−∞, ∞) has no finite endpoints. [−1, 1] includes its two endpoints, the same statement as −1 ≤ y ≤ 1.
3 Why
On the unit circle, sine is the vertical coordinate of the moving point. The point moves without jumping, so its height changes without jumping. No height can exceed the radius 1 or fall below −1. A full lap travels 2π and returns to the same point, so the height record repeats every 2π. Walking the same distance backward puts the dot at the opposite height, which explains sin(−x) = −sin x and the graph's symmetry about the origin.
4 The rule
For : Domain is all real numbers; Range is ; the graph is Continuous.
Period ; for any Integer k; .
The same idea, five ways
sine of x is the circle point's height after a turn of x radians.
The sine graph records every radian input and the height that input produces.
- y = sin x
- Graph points: (x, sin x)
- Domain: (−∞, ∞)
- Range: [−1, 1], or −1 ≤ y ≤ 1
- Domain: −∞ < x < ∞
- Domain: {x | x is a real number}
- Range: {y | −1 ≤ y ≤ 1}
Track a wheel rider's height as the rider circles the center.
The same idea, other ways
A moving point on a Unit circle supplies the height. At a quarter turn its vertical coordinate is 1, so the sine graph contains (, 1).
Imagine writing the wheel rider's height on a strip of paper that moves steadily sideways. Each full lap makes another copy of the same rise and fall.
At the right, top, left, bottom, and right positions, the heights are 0, 1, 0, −1, 0. Those five numbers give the shape before you fill in extra points.
A full lap returns to the same physical point. Its height cannot change merely because you reached it after another lap. Therefore sin(x + 2π) = sin x.
| x exact, in radians | sin x exact | x rounded to 2 decimal places | sin x rounded to 2 decimal places |
|---|---|---|---|
| 0 | 0 | 0.00 | 0.00 |
| 0.52 | 0.50 | ||
| 0.79 | 0.71 | ||
| 1.05 | 0.87 | ||
| 1 | 1.57 | 1.00 | |
| 2.09 | 0.87 | ||
| 2.36 | 0.71 | ||
| 2.62 | 0.50 | ||
| π | 0 | 3.14 | 0.00 |
| 3.67 | |||
| 3.93 | |||
| 4.19 | |||
| 4.71 | |||
| 5.24 | |||
| 5.50 | |||
| 5.76 | |||
| 2π | 0 | 6.28 | 0.00 |
Part 1: Domain and Continuous
A Domain is the list of inputs you are allowed to give a function. For sine, you can turn the wheel any distance forward or backward, so every Real number is allowed. Continuous means the drawn record has no break or jump. Think of following a road without teleporting to a different height. These are two different facts: allowing every input does not, by itself, guarantee a smooth trip between inputs.
- Rule: Domain of sin x: all real numbers, written (−∞, ∞).
- Rule: Continuous: sine has no breaks or jumps anywhere in its domain.
- Rule: The circle point and its height move continuously; that is why sine is continuous.
Reminder
Reminder: Real number and infinity
- Real number and infinity. 7, −2, and are real inputs. ∞ describes endless extent; it is not an input or endpoint you reach.
The same idea, five ways
every real input works, and the graph has no jumps.
Sine has all real numbers as its domain and is continuous everywhere.
- Domain: (−∞, ∞)
- For every real x, sin x exists.
- {x | x is a real number}
You can keep riding the circular track without falling into a gap.
Worked example
An input beyond the first lap still works
This asks whether 7 is an allowed input for sin x, rather than asking for its exact output.
Show the steps and the answer
- Read the Domain statement: every Real number is allowed.You can walk any real signed distance around the unit circle.
- 7 is a Real number, so 7 belongs to the domain.The allowed inputs are not limited to the first drawn cycle.
- Yes. sin 7 exists
- the input 7 is in the domain.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Domain asks about the horizontal inputs; Continuous asks whether the curve breaks.
Part 2: Range
The Range is the collection of outputs the function can make. The rider's wheel has radius 1, so the rider can get 1 unit above the center or 1 unit below it, but no farther. Every height in between occurs somewhere on the lap. You can give sine a very large input, meaning many turns, without making its output very large. More travel makes another lap, not a taller wheel.
- Rule: Range of sin x: [−1, 1].
- Rule: Equivalent statements: −1 ≤ sin x ≤ 1 and |sin x| ≤ 1.
- Rule: The endpoints are included because sine reaches both 1 and −1.
Reminder
Reminder: Absolute value and closed intervals
- Absolute value and closed intervals. |−1| = 1 is distance from zero. [−1, 1] includes both ends, as do the signs in −1 ≤ y ≤ 1.
The same idea, five ways
sine's output is between minus one and one, including both.
Every sine output lies in the closed interval from −1 to 1.
- Range: [−1, 1]
- |sin x| ≤ 1
A rider on a radius-one wheel cannot be more than one unit above its center.
Worked example
Tell an output from an input
This asks whether can be a sine output, rather than whether is an allowed input.
Show the steps and the answer
- Compare with the highest allowed output 1: .Range is an output question, and the radius-one circle has top height 1.
- Reject as an output, while keeping it as a permitted input.Every real input is allowed, but outputs stay between −1 and 1.
- is not in the range of sine.
- is in its domain.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: Domain goes across; Range rises and falls. Point to the horizontal and vertical axes as you say it.
Part 3: Periodic function, Period (T), and Cycle
A repeating wallpaper strip has a whole design that returns again and again. A Periodic function does the same thing with its outputs. A positive shift p is a period if moving every input p units to the right gives the same output. When we say Period (T), we mean the smallest positive shift that repeats the entire design. A Cycle is one complete copy of that design. For sine, one cycle comes from one full circle lap. This least positive repeat distance is also called the Fundamental period.
- Rule: A Periodic function has a positive p such that x + p is also in its domain and f(x + p) = f(x) for every x in its domain.
- Rule: For sine, the smallest positive period is T = 2π.
- Rule: sin(x + 2kπ) = sin x for every Integer k; negative k repeats the pattern to the left.
- Rule: An Integer is a whole number with a possible minus sign, such as −2, 0, or 3.
Reminder
Reminder: Adding fractions with π
- Adding fractions with π. + π = + = because the pieces must have the same denominator.
The same idea, five ways
sine's whole pattern repeats every two pi units.
A sine cycle has horizontal length 2π, and the same cycle continues both ways.
- f(x + p) = f(x), p > 0
- T = 2π for sin x
- sin(x + 2kπ) = sin x, k an integer
One complete wallpaper design repeats after the same width each time.
Worked example
A matching pair of zeros is not a whole period
This asks whether shifting sine by π repeats every output. Try the simple input 0 and the harder check input .
Show the steps and the answer
- At 0, and .These are both circle points level with the center.
- At , but .A half turn carries the top point to the bottom point.
- Reject as a period and use .A period must repeat every output, and the peak test has failed for π.
- π is not a period of sine.
- The smallest positive period is 2π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- A period repeats the entire design. Measure from a peak to the next peak or from an upward middle crossing to the next upward middle crossing.
Part 4: Odd function and symmetry about the origin
Imagine turning the wheel the same amount in opposite directions from the right edge. One rider goes up while the other goes down by the same amount. An Odd function has opposite outputs at opposite inputs: changing x to −x changes the output's sign too. Symmetry about the origin means a half turn of the drawn page around (0, 0) leaves the graph in the same place. The matching points are (x, y) and (−x, −y).
- Rule: Sine is an Odd function: sin(−x) = −sin x.
- Rule: Symmetry about the origin matches (x, y) with (−x, −y).
- Rule: With respect to means measured or described in relation to; here the center of the symmetry is the Origin.
Reminder
Reminder: A minus sign in front of an output
- A minus sign in front of an output. −() = −, and −(−1) = 1 because reversing a negative direction gives a positive direction.
The same idea, five ways
reverse the input and sine reverses the output.
Sine is odd, so its graph has symmetry about the origin.
- (x, y) matches (−x, −y)
Equal turns forward and backward lift one rider and lower the other by equal amounts.
Worked example
Reverse an input and then extend beyond a full turn
This asks for sine heights at negative inputs. Find sin(−) and sin(−) using the positive heights already taught.
Show the steps and the answer
- .Oddness reverses the height when the input is reversed.
- , so .The earlier repeat example found the positive height, and oddness supplies the negative one.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: Odd means opposite input, opposite output. Check it with sin() = 1 and sin(−) = −1.
Part 5: Increasing and Decreasing: follow the height, not the angle alone
Picture the dot riding around the unit circle while you record its height. From the right edge to the top, the dot climbs. From the top around the left side to the bottom, it descends. From the bottom back to the right edge, it climbs again. Increasing means the output rises whenever the input moves right within the interval you named. Decreasing means the output falls there. A larger input therefore does not always mean a larger sine output. First locate both inputs within the same rising or falling stretch, the way you would check which side of a hill you are walking on.
- Rule: Increasing on an interval means u < v gives sin u < sin v for any two inputs u and v in that interval.
- Rule: Decreasing on an interval means u < v gives sin u > sin v for any two inputs u and v in that interval.
- Rule: Sine is increasing on [0, ] and [ , 2π ], because the circle dot climbs on those arcs. These intervals are [0°, 90°] and [270°, 360°] when the inputs use degrees.
- Rule: Sine is decreasing on [ , ], because the dot descends from the top through the left side to the bottom. This interval is [90°, 270°] for degree inputs.
- Rule: These intervals repeat after every whole turn. For any Integer k, sine increases on [2kπ, + 2kπ] and [ + 2kπ, 2π + 2kπ], and decreases on [ + 2kπ, + 2kπ].
Reminder
Reminder: Sine is circle height, Degrees and radians, Closed intervals, A whole-turn repeat
- Sine is circle height. At the rightmost dot sin 0 = 0; at the top sin() = 1; at the bottom sin() = −1.
- Degrees and radians. The top is 90° = , the bottom is 270° = , and a full lap is 360° = 2π. Compare angles using one unit.
- Closed intervals. [0, ] includes the start and top. Increasing still compares distinct inputs: 0 < and sin 0 < sin().
- A whole-turn repeat. sin(x + 2kπ) = sin x for Integer k. Shifting both inputs by the same whole turn keeps their output comparison.
The same idea, five ways
first find the rising or falling stretch, then compare heights.
On an increasing interval, a larger input has a larger output; on a decreasing interval, a larger input has a smaller output.
- Increasing: if u < v in the same increasing interval, sin u < sin v.
- Decreasing: if u < v in the same decreasing interval, sin u > sin v.
- Sine increases on [0, ] and [ , 2π ].
- Sine decreases on [ , ].
- Graph words: rising left to right means increasing; falling left to right means decreasing.
Check which side of the hill holds both stops before comparing their heights.
Worked example
Compare two heights before a peak, then across the peak
Compare sin 35° with sin 55°, then compare sin 75° with sin 105°. This asks which circle dot is higher in each pair. Find the order or equality without calculating decimal outputs.
Show the steps and the answer
- Locate and : .Both dots lie on the right-to-top arc, where the dot's height increases as its angle increases.
- Write .The later position on this rising arc is higher, so the sine outputs keep the order of the inputs.
- Locate the other pair: . Calculate and .The inputs lie on opposite sides of the top, equally far from its vertical radius. They are not together in one rising interval.
- Reflect the circle point across the vertical axis. It lands at with the same vertical coordinate. Write .Reflection across a vertical mirror changes sideways position but keeps height. Sine reads that unchanged height.
- sin 35° < sin 55°.
- sin 75° = sin 105°.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Trace the sine graph left to right before comparing two outputs. Name the interval you are using.
- Memory cue: rising keeps order, falling reverses order. Check the location of both inputs before applying it.
- Rebuild the rise and fall intervals from the circle's top and bottom. Do not memorize a separate interval for every repeated lap.
- An angle's quadrant determines coordinate signs; it does not make sine increasing throughout every positive-height region. The top splits the upper half into a rising side and a falling side.
5 How
- Treat x as the Input, also called the Independent variable, and y = sin x as the Output, also called the Dependent variable. The output depends on which input you choose.
- Use radians on the horizontal axis. On a Unit circle, a Radian input has the same numerical value as signed rim distance along the circle. Ordinary traveled Arc length equals the input's magnitude. The Central angle is the turn at the center.
- Read each column of the value table: its top entry is x and its bottom entry is sin x. Point plotting means putting the Ordered pair (x, sin x) on the Graph in the xy-plane.
- Locate the five Key points (0, 0), (, 1), (π, 0), (, −1), and (2π, 0). They record the start, top, middle, bottom, and return. A Key point is an anchor at a quarter-cycle position; five such anchors divide a cycle into four gaps. A quarter turn is one fourth of a full turn. A peak is a top height and a valley, also called a trough, is a bottom height.
- Draw a smooth curve through the points. An Intercept is a crossing or touching of an axis; here x = 0, π, and 2π give output 0.
- Continue the same pattern left and right. One Cycle has horizontal length 2π, because a full circle lap repeats the entire height record.
Build a sine graph from circle heights
- Confirm that the horizontal inputs are radians.
- Read down each input column to get its sine height.
- Plot the five quarter-turn points first, then the intermediate source points.
- Connect smoothly and repeat by adding or subtracting 2π from inputs.
6 Worked example
Worked example
One cycle of y = sin x on [−2π, 0] from clockwise trips around the unit circle
A point P starts at (1, 0) on the unit circle. For an input x in radians, P travels a rim distance equal to the magnitude of x, counterclockwise when x > 0 and clockwise when x < 0. The output y = sin x is the height (y-coordinate) of the point where P stops. The figure marks P after a counterclockwise quarter turn of 90°, at (0, 1). (a) For x = −2π, −, −π, − and 0, find where P stops and make a value table of sin x. (b) Plot the ordered pairs (x, sin x), using π ≈ 3.14 to place the inputs, and draw one cycle of y = sin x on [−2π, 0]. Name its intercepts, its peak and its valley. (c) Continue the pattern to find sin(), and state the domain and range of y = sin x.
Show the steps and the answer
- Name the variables. The input x is the independent variable: the signed rim distance P travels. The output is the dependent variable: the height where P stops.Where P stops, and so how high it is, depends on how far and which way it travels. So x is chosen first and y is read from it.
- Turn each input into quarter turns. The unit circle's circumference is , so a full lap covers of rim. A quarter turn, a central angle of , covers . Divide each magnitude by : is 1 quarter turn, is 2, is 3 and is 4, one full lap. The nonzero inputs are negative, so those trips go clockwise. For , P does not move.On a unit circle a radian input has the same value as the signed rim distance. The arc length traveled equals the input's magnitude, and the sign gives the direction.
- Walk clockwise from (1, 0) one quarter turn at a time: P reaches , then , then (0, 1), then (1, 0) again. So and . Also , since P stays at (1, 0).Clockwise from (1, 0) the path heads down first, passing the bottom, the left side and the top of the circle in that order. sin x is the y-coordinate of the stopping point.
- Write the value table with the inputs in increasing order. Top row x: , 0. Bottom row sin x: 0, 1, 0, , 0. Each column is one ordered pair (x, sin x).A column's top entry is the input and its bottom entry is the output for that input, so every column gives exactly one point to plot.
- Plot and (0, 0). With : and . So the inputs sit at about and 0 on the horizontal axis.The horizontal axis is measured in radians, which are real numbers, so each multiple of π has its own place on the number line.
- Name the five key points: start , top , middle , bottom and return (0, 0). Neighboring inputs are apart, so the five anchors split the cycle into four equal gaps.The inputs are one quarter turn apart, which is the spacing of the key points. Height 1 belongs to the highest point of the circle (the peak), and height −1 to the lowest (the valley).
- Draw a smooth curve through the points. It rises from to the peak , falls through to the valley , and rises again to (0, 0). The intercepts are at and 0, where , and the curve meets the y-axis at the origin.P slides along the rim without jumping, so its height changes gradually and the graph is continuous. The curve stays between −1 and 1 because no point of the unit circle is higher than 1 or lower than −1.
- Compare with the cycle on . Adding to the inputs gives 0, with the same outputs 0, 1, 0, , 0. So the cycle on is the cycle on moved to the left. Repeating it left and right covers every real x: the domain is all real numbers and the range is .Adding 2π adds one full counterclockwise lap, which ends at the same point, so sin(x + 2π) = sin x. One cycle has horizontal length 2π.
- For , take away 6 full laps, : . So , the peak value in the table.sin(x + 2kπ) = sin x for any integer k. Here k = −6, which moves the input into the cycle already drawn on [−2π, 0].
Work to write
- Quarter turn: = of rim; x < 0 means clockwise
- x: −2π, −, −π, −, 0 and sin x: 0, 1, 0, −1, 0
- Key points: (−2π, 0), (−, 1), (−π, 0), (−, −1), (0, 0)
- Intercepts: x = −2π, −π, 0; peak (−, 1); valley (−, −1)
- − 12π = −, so sin() = sin(−) = 1
- Domain: all real numbers; range: [−1, 1]; period 2π
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 3
Use a reference angle above the left axis
Find sin() exactly. This asks for a circle height after a 135° turn; first find the small angle to the horizontal axis.
Show the steps and the answer
- is between and , so its terminal ray is in Quadrant II.A turn between 90° and 180° finishes above and left of the center.
- Reference angle . Add it back: .Subtracting from the left-axis angle finds and checks the acute tilt of this ray from that axis.
- The triangle gives height magnitude . Keep the positive sign, so .The triangle measures size, and a point above the horizontal axis has positive height.
- Reference angle = .
Rung 2 of 3
Keep size and sign separate below the left axis
Find sin() exactly. This asks for the circle height at 225°, where the reference triangle supplies size and the region supplies sign.
Show the steps and the answer
- , so the ray is in Quadrant III.The turn finishes between the left side and the bottom, below the horizontal axis.
- Reference angle . Check .Subtracting the half turn finds and verifies the small tilt below the left horizontal axis.
- Use magnitude and attach a minus sign: .The 45° triangle gives an unsigned leg length, but the circle point's height is negative below the axis.
- Reference angle = .
Rung 3 of 3
Remove several full turns before reading the height
Find sin() exactly. This asks for a height after more than two full turns; use the repeats to reach a known first-lap angle.
Show the steps and the answer
- Two full turns have angle . Subtract them: .Removing complete laps finds a smaller angle that finishes at the same circle point.
- Verify the decomposition: .Adding back confirms that only whole turns were removed.
- Use with : .The two extra laps preserve the height, and the first rung rebuilt the exact 45° value.
- Matching first-lap angle = .
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Know cold: sine starts at the middle and rises. Memory device: start, top, middle, bottom, start gives heights 0, 1, 0, −1, 0.
- Understand, then rebuild: the five points come from the wheel's right, top, left, bottom, and right positions. You can rebuild them in one lap rather than memorize seventeen pairs.
- Put on the cheat sheet: Domain (−∞, ∞), Range [−1, 1], T = 2π, sin(x + 2kπ) = sin x, and sin(−x) = −sin x.
- The source's rounded row is a plotting aid. Exact fractions and roots are the answers to use when exact values are requested.
7 The trap
Do not turn the exact radian input into a degree input of °. It means a quarter turn, or 90°. The decimal 1.57 is only a rounded label for that exact input.
Keep in mind
- Sine is a number, the point's height, not the y-axis itself: a rider 0.6 below the hub gives a sine of −0.6.
- The input is in radians: means a quarter turn (90°), and 1.57 is only its rounded label.
- Far inputs repeat, so remove whole laps of 2π first: sin() = sin() = .
- √ alone means the nonnegative (principal) root, so ≈ 1.41, while the equation = 2 has two answers, and −; a height below the hub gets its minus sign written in front, as in −.
Memory hook
Sine is the rider's height: start in the middle and go up first. Middle, top, middle, bottom, middle: 0, 1, 0, −1, 0.
Flash cards
Say the answer out loud, then flip.
What are the domain and range of y = sin x?
- Domain (inputs allowed): all real numbers
- Range (outputs produced): [−1, 1]
What is the period of y = sin x?
List the five key points of one sine cycle.
Find sin().
What does sin(−x) equal?
Can sin x equal 1.2?
Lesson 2 of 8
2. A changes height: amplitude, stretch, compression, reflection
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture the wheel rider's height record printed on stretchy paper. Pull the paper upward and downward while holding the middle line still. Every recorded height becomes twice as far from that line, but the rider reaches the top at the same input as before. The number A in y = A sin x performs that height multiplication. It is a Constant, meaning a fixed number throughout the graph. Its size sets the Amplitude, the distance from the middle to a peak. Its sign controls which direction a height points. A negative A turns an upward height into a downward one.
Explain it like I am five
Picture the Ferris wheel height record printed on stretchy paper. Pull it up and down while the middle line stays put: every height moves farther from the middle, but each top stays at the same spot across. The number A in y = A sin x does that stretch: it multiplies every height.
Example: y = 6 sin x. Where sin x = 1, at x = , the height is 6 × 1 = 6. Where sin x = −1, at x = , the height is 6 × (−1) = −6. The wave runs from −6 to 6, and its amplitude, the distance from the middle line y = 0 up to a peak (a top), is 6.
Now y = −6 sin x. The minus flips every height: at the wave sits at −6, a valley (a bottom) instead of a peak. That flip is a reflection across the x-axis. The amplitude is still |−6| = 6: the bars, called absolute value, keep the size and drop the sign, since a distance is never negative.
2 Picture it
Reminder
Reminder: Absolute value, Signed multiplication, Multiplying fractions, Subtracting a negative, Dividing a gap in half, An average locates the middle, Sine key points, Axis equations
- Absolute value. Absolute value is distance from zero: |−3| = 3 and || = .
- Signed multiplication. −3 × 1 = −3, but −3 × (−1) = 3. A negative factor reverses each height's direction.
- Multiplying fractions. × = by multiplying across the top and bottom.
- Subtracting a negative. 3 − (−3) = 3 + 3 = 6, the full distance from bottom height −3 to top height 3.
- Dividing a gap in half. = 3 because the two equal middle-to-extreme distances together make the gap 6.
- An average locates the middle. (3 + (−3)) ÷ 2 = 0 gives the height halfway between the extremes.
- Sine key points. sin() = 1 and sin() = −1; multiply these heights by A to find the new extremes.
- Axis equations. y = 0 means every point has height zero and runs horizontally. x = 0 means every point has input zero and runs vertically.
3 Why
Sine's outputs cover every height from −1 to 1. Multiplying those outputs by A scales their distances from zero by |A|, so the new extreme heights are |A| and −|A|. The gap from the lowest to highest height is therefore 2|A|; halving that gap returns the amplitude. Multiplication by a negative reverses every height's direction, producing a reflection across the x-axis. The input has not changed, so a nonconstant wave keeps its original period 2π.
4 The rule
For : Amplitude ; Midline is ; Range is .
|A| > 1 stretches vertically; 0 < |A| < 1 compresses vertically; A < 0 reflects across the x-axis. For .
The same idea, five ways
A multiplies each height, and amplitude is the size of A.
The outside coefficient scales vertical distances and may reverse their direction.
- y = A sin x
- Amplitude = |A|
- Amplitude =
- Range: [−|A|, |A|]
- Midline: y = 0
Stretch a printed height record while holding its middle still.
The same idea, other ways
Compare the original wave with 2 sin x. Both reach their first peak at , but their peak heights are 1 and 2. Only the vertical distances changed.
Keep the middle line fixed while stretching a height record. A factor 4 makes a height become 4 × = 2; a factor 2 makes it 1.
A top height 3 and bottom height −3 are 3 − (−3) = 6 units apart. The middle splits that gap in half, so the amplitude is 6 ÷ 2 = 3.
Multiplying a height 1 by −1 puts it at −1. Multiplying a height −1 by −1 puts it at 1. The graph reflects, but both points remain one unit from the middle.
| Function | A | Amplitude | Range |
|---|---|---|---|
| y = sin x | 1 | 1 | |
| y = 2 sin x | 2 | 2 | |
| 3 | |||
Part 1: Vertical stretch
A Vertical stretch makes every height farther from the middle by the same factor. Think of enlarging only the height of a photograph. Its left-to-right positions stay fixed. For 2 sin x, the old height 1 becomes 2 and the old height −1 becomes −2. A zero height stays zero. The source compares 4 sin x with 2 sin x: the first has amplitude 4, twice the amplitude 2 of the second.
- Rule: If |A| > 1, multiply all distances from the middle by |A|.
- Rule: For positive A, outputs keep their signs; a negative A also adds reflection.
- Rule: 4 sin x has twice the amplitude of 2 sin x, because 4 ÷ 2 = 2.
Reminder
Reminder: Multiplying a fraction
- Multiplying a fraction. 4 × = = 2; multiply the numerator by 4 and reduce.
The same idea, five ways
make every height farther from zero by the factor |A|.
An outside multiplier larger than 1 in size produces a vertical stretch.
- |A| > 1
- (x, sin x) becomes (x, A sin x)
Enlarge a photograph's height while keeping its width fixed.
Worked example
Finding a vertical stretch from the highest and lowest points
The graph of y = A sin x, with x in radians and A a constant, is drawn for 0 ≤ x ≤ 2π. On this interval its highest point is (, 2.5) and its lowest point is (, −2.5). Use sin = 1, sin = −1 and sin = . (a) Find the amplitude and the value of A, and write the equation of the graph. (b) Is the graph a vertical stretch or a vertical compression of y = sin x? By what factor? Is it reflected across the x-axis? (c) The graph of y = sin x passes through (, ). Find the point on y = A sin x that has the same input. (d) State the midline, the range and the period.
Show the steps and the answer
- Read the extreme heights. The Maximum is 2.5, at , and the Minimum is , at . Amplitude .The wave is centered at y = 0. Its top-to-bottom distance of 5 covers the amplitude twice, once above the midline and once below it. Halving gives 2.5. Calling 5 the amplitude is the error to avoid.
- The amplitude is |A|, so and A is either 2.5 or . Test the input : . The point there is the highest point, at height 2.5. So , and the equation is .The amplitude fixes only the size of A, not its sign. Where sin x = 1, the output equals A itself. If A were −2.5, the output at would be −2.5. Then (, −2.5) would be the lowest point, which contradicts the given highest point (, 2.5).
- Compare with 1. Because 2.5 > 1, the graph is a Vertical stretch of by a factor of 2.5. Because is positive, there is no Reflection.When |A| > 1, every output becomes |A| times as far from the x-axis. Only a negative A flips the graph across the x-axis.
- Multiply the sine output at by A: . The point is .A multiplies on the outside of sine, so it changes outputs only. The input stays fixed. The point (, ) on y = sin x moves straight up to 2.5 times its height.
- Write the Midline and the Range .Nothing is added outside the sine, so the wave stays centered on y = 0. Its outputs run from the Minimum −2.5 up to the Maximum 2.5.
- State the period: .A ≠ 0, and A changes only heights, never inputs. So the pattern repeats every 2π, exactly as y = sin x does.
Work to write
- Amplitude = = = 2.5
- A sin = A · 1 = 2.5, so A = 2.5 and y = 2.5 sin x
- |A| = 2.5 > 1: vertical stretch by a factor of 2.5; A > 0, so no reflection
- y = 2.5 sin = 2.5 · = 1.25, point (, 1.25)
- Midline y = 0; Range [−2.5, 2.5]; Period T = 2π
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: Outside tells the truth. An outside factor 2 makes heights twice as large.
Part 2: Vertical compression
A Vertical compression moves every height closer to the middle by the same factor. Imagine squeezing a photograph shorter without narrowing it. For sin x, a height 1 becomes , and a height −1 becomes −. The input positions stay unchanged. Compression uses a nonzero factor with size below 1. A zero factor collapses all heights completely and produces a constant line rather than a wave.
- Rule: If 0 < |A| < 1, the wave is vertically compressed.
- Rule: For y = sin x, amplitude is , range is [−, ], and period stays 2π.
Reminder
Reminder: Fraction multiplication
- Fraction multiplication. × = = because fractions multiply across numerator and denominator.
The same idea, five ways
move every height closer to the middle by a fraction.
A nonzero outside multiplier smaller than 1 in size produces vertical compression.
- 0 < |A| < 1
- Amplitude =
Squeeze a printed picture shorter while leaving its width unchanged.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Ask what the fraction multiplies. Outside sine means outputs are compressed.
Part 3: Reflection
A Reflection across the x-axis turns every height upside down while keeping its input position. Think of the wave seen in a mirror along its middle line. For −sin x, the old height 1 becomes −1, and the old height −1 becomes 1. The middle points remain on the middle. The distance to the middle does not change, so the amplitude is still 1. For −3 sin x, reflection and a vertical stretch occur together.
- Rule: A < 0 reflects outputs across the x-axis.
- Rule: The point (x, y) becomes (x, −y) for multiplication by −1.
- Rule: −sin x has amplitude 1 and first goes downward from (0, 0).
Reminder
Reminder: Signed multiplication
- Signed multiplication. A negative times a positive is negative: −1 × 1 = −1. Two negatives give positive: −1 × (−1) = 1.
The same idea, five ways
negative A turns heights upside down.
A negative outside coefficient reflects the sine graph across the x-axis.
- A < 0
- (x, y) becomes (x, −y)
View the height record in a mirror along its horizontal middle.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write A and |A| separately to keep sign and size apart.
Part 4: Amplitude from maximum and minimum
The tallest and lowest heights are the Maximum and Minimum. Their difference measures the full height of the wave from bottom to top. The Amplitude is only half that distance, because the Midline sits halfway between the extremes. Think of a room with a horizontal stripe halfway up the wall: the distance from stripe to ceiling is half the floor-to-ceiling height. The repeated peaks are Local maxima, and the valleys are Local minima, because each is highest or lowest among nearby points.
- Rule: Amplitude = .
- Rule: Midline height = . For y = A sin x, this height is 0.
- Rule: The x-axis has equation y = 0. The line x = 0 is the vertical y-axis.
- Rule: For these waves, local peaks all reach the global maximum and local valleys all reach the global minimum.
Reminder
Reminder: Subtracting a negative and taking an average
- Subtracting a negative and taking an average. 7 − (−7) = 14 finds the full gap. (7 + (−7)) ÷ 2 = 0 finds the halfway height.
The same idea, five ways
subtract bottom from top, then halve the gap.
Amplitude is half the difference between maximum and minimum outputs.
- Amplitude =
- Midline height =
- For y = A sin x: midline y = 0
Half a room's height runs from its middle stripe to its ceiling.
Worked example
Find the middle and amplitude of an unshifted wave
This asks for a wave's middle height and middle-to-top distance. Its maximum is 7 and minimum is −7.
Show the steps and the answer
- Find the full height gap: .Subtracting the negative bottom measures the entire distance from −7 to 7.
- Halve the gap: amplitude .The middle divides the top-to-bottom distance into two equal parts.
- Find the middle height: , so the Midline is .The average of the two extreme heights lies halfway between them.
- Amplitude = 7.
- Midline: y = 0.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: Amplitude is half the height gap. Draw middle-to-top and middle-to-bottom as two equal pieces.
5 How
- Find A, the Constant multiplying sine on the outside. In −3 sin x, A = −3; in sin x, the invisible coefficient is A = 1.
- Compute |A| by keeping its size and removing its minus sign. This is the Amplitude, never a negative distance.
- Compare |A| with 1 to decide whether there is a Vertical stretch, a Vertical compression, or unchanged height. A negative sign adds a Reflection.
- Multiply each original sine output by A. The input coordinates stay fixed because this is an outside multiplication.
- Write the Midline y = 0 and Range [−|A|, |A|]. Maximum and Minimum mean highest and lowest outputs; a Local maximum or Local minimum is a peak or valley compared with nearby points.
- If you are given extreme heights, subtract minimum from maximum and divide by 2. The source waves are centered at zero; do not mistake the entire top-to-bottom distance for the amplitude.
- If A = 0, every output is 0. Draw the constant graph y = 0 and do not assign a smallest positive period.
Separate height size from sign
- Read A outside sine.
- Take |A| for amplitude.
- Use |A| to decide stretch or compression. A negative sign tells you the heights will also reflect when you multiply by signed A in the next step.
- Multiply the original outputs by the signed A exactly once and retain the same inputs. This one multiplication already includes any reflection.
- Check the extreme heights and the range.
6 Worked example
Worked example
Shallower and flipped: the border edge y = −0.6 sin x
A designer cuts a wavy edge for a paper border. On the design grid 1 unit = 1 cm, x is the distance along the strip, and y is the height above the strip's center line y = 0 (negative y means below the line). The template edge is y = sin x, which passes through the five points (0, 0), (, 1), (π, 0), (, −1) and (2π, 0). In the figure these x-values are plotted as the decimals 0, 1.57, 3.14, 4.71 and 6.28. To get a shallower wave that dips below the center line first, the designer switches to the edge y = −0.6 sin x. (a) Writing the new edge as y = A sin x, name A and find the amplitude. (b) Decide whether the height is stretched, compressed or unchanged, and whether the edge is reflected. (c) Find the point of the new edge at each of the five x-values. (d) Give the midline, the maximum and the minimum height and where each occurs for 0 ≤ x ≤ 2π, the range, and the period. (e) A coworker measures 1.2 cm from the highest point of the new edge to its lowest point and says the amplitude is 1.2 cm. Explain the mistake and find the amplitude from the extreme heights.
Show the steps and the answer
- Write the new edge as and read the constant multiplying sine on the outside: gives .A is the number that multiplies the whole output sin x, and the minus sign belongs to A.
- Remove the sign to get the amplitude: , so the new edge reaches 0.6 cm above and 0.6 cm below the center line.Amplitude is the distance from the midline to a peak, so it keeps the size of A and is never negative.
- Compare |A| with 1: 0 < 0.6 < 1, so each height becomes 0.6 times the template height, which is a vertical compression. Because , the edge is also reflected across the x-axis, which here is the center line.A size between 0 and 1 compresses vertically (a size above 1 would stretch), and a negative A sends every output to the opposite side of y = 0.
- Multiply each template height by and keep each x: and . The new points are (0, 0), and .The −0.6 multiplies outside the sine, so it changes outputs only. The inputs stay fixed, and the zeros at 0, π and 2π stay put because −0.6 · 0 = 0.
- Read the extremes from the new points: the maximum (highest output) is 0.6 at and the minimum (lowest output) is at . Write the midline and the range .sin x runs from −1 to 1, so −0.6 sin x runs from −0.6 to 0.6 and stays centered on y = 0. The reflection turns the template peak at into a valley and the template valley at into a peak.
- State the period: , so , and the pattern repeats every cm along the strip.An outside multiplication changes heights, not inputs, so one full wave still covers an x-length of 2π.
- Answer the coworker from the extreme heights: . The measured 1.2 cm is the whole top-to-bottom distance, which is twice the amplitude.The wave is centered on y = 0, so the amplitude is the distance from the midline to a peak. That is half the distance from the lowest point to the highest point.
- (a) A = −0.6 and the amplitude is 0.6 cm. (b) Vertical compression, since 0 < 0.6 < 1, and a reflection across the x-axis, since A < 0. (c) (0, 0), (, −0.6), (π, 0), (, 0.6), (2π, 0). (d) Midline y = 0
- maximum 0.6 at x =
- minimum −0.6 at x =
- range [−0.6, 0.6]
- period T = 2π. (e) 1.2 cm is maximum − minimum, the full height of the wave
- the amplitude is = 0.6 cm.
Work to write
- Amplitude = |−0.6| = 0.6
- 0 < 0.6 < 1, so vertical compression
- A < 0, so reflection across the x-axis
- New points: (0, 0), (, −0.6), (π, 0), (, 0.6), (2π, 0)
- Maximum 0.6 at x = ; minimum −0.6 at x =
- Midline y = 0; Range [−0.6, 0.6]
- T = 2π
- = = 0.6, so the amplitude is 0.6 cm, not 1.2 cm
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Vertical stretch: amplitude, key points and range of y = 4 sin x
Compare y = 4 sin x with y = sin x. Use these key outputs of y = sin x: at the inputs x = 0, , π, , 2π, its outputs are 0, 1, 0, −1, 0. (a) Name A and find the amplitude. (b) Decide whether the height is stretched, compressed or unchanged, and whether the graph is reflected across the x-axis. (c) Find the outputs of y = 4 sin x at the same five inputs and list the key points. (d) State the midline, the maximum and minimum, the range and the period. (e) Confirm the amplitude from the maximum and minimum heights.
Show the steps and the answer
- Find A, the constant multiplying sine on the outside. In .A is the number written in front of sin x, and it multiplies the output. In y = sin x it would be the invisible 1, but here it is 4.
- Compute the amplitude: .The amplitude is |A|, the size of A with any minus sign removed. It measures a distance from the midline, so it is never negative.
- Compare |A| with 1. Because 4 > 1, the graph has a vertical stretch by a factor of 4. Because is positive, there is no reflection across the x-axis.|A| > 1 stretches vertically, 0 < |A| < 1 compresses vertically, and |A| = 1 leaves the height unchanged. Only A < 0 adds a reflection.
- Multiply each key output of sin x by : . The key points are (0, 0), .A multiplies on the outside, so it changes only the outputs (heights). The inputs 0, , π, , 2π stay fixed, and every height becomes 4 times as far from the x-axis.
- Write the midline . The peak at gives the maximum 4, and the valley at gives the minimum . So the range is .Multiplying by A keeps the wave centered on y = 0, and the outputs run from −|A| to |A|. The highest output of sin x, 1, becomes 4, and the lowest, −1, becomes −4.
- Confirm the amplitude from the extreme heights: .The wave is centered at zero, so the full top-to-bottom distance of 8 spans two amplitudes. The amplitude is half of it, the distance from the midline to a peak, so 8 is not the amplitude.
- Check whether A is zero. Here , so the graph is a true wave, not the flat line , and its period is .An outside multiplication never changes the input, so the wave repeats every 2π, exactly like y = sin x. Only A = 0 would make every output 0 and leave no smallest positive period.
Work to write
- A = 4
- Amplitude = |A| = |4| = 4
- |A| = 4 > 1, so vertical stretch by a factor of 4; A > 0, so no reflection
- Outputs at x = 0, , π, , 2π: 4 · 0 = 0, 4 · 1 = 4, 4 · 0 = 0, 4 · (−1) = −4, 4 · 0 = 0
- Key points: (0, 0), (, 4), (π, 0), (, −4), (2π, 0)
- Midline y = 0; maximum 4, minimum −4
- Range [−4, 4]
- Amplitude check: = = 4
- A ≠ 0, so T = 2π
Rung 2 of 4
Invert a test tone: y = −sin x flips the wave without changing its size
In an audio editor, a test tone is drawn as the curve y = sin x, with x in radians. The editor's Invert command multiplies every output by −1, so the inverted tone is y = −sin x. The original tone passes through these seven points of y = sin x: (−π, 0), (−, −1), (−, −), (0, 0), (, ), (, 1) and (π, 0). (a) Name A in y = −sin x and find the amplitude. (b) Decide whether Invert stretches, compresses or keeps the height of the wave, and whether it reflects the graph. (c) Find the point of y = −sin x at each of the same seven inputs. (d) State the midline, the range and the period T of y = −sin x. (e) For −π ≤ x ≤ π, find the maximum and the minimum of y = −sin x and the inputs where they occur. Then use them to check the amplitude.
Show the steps and the answer
- Find A. Write as , so .A is the constant multiplying sine on the outside. A lone minus sign in front of sin x is a hidden factor of −1, just as plain sin x hides A = 1.
- Find the amplitude: .The amplitude keeps the size of A and removes its minus sign. It measures how far the wave reaches from the midline, which is a distance and is never negative. The amplitude is 1, not −1.
- Compare with 1. They are equal, so there is no vertical stretch and no vertical compression, and the height is unchanged. Since , the graph is also reflected across the x-axis.|A| > 1 would stretch the wave and 0 < |A| < 1 would compress it; |A| = 1 does neither. The size of A decides stretch or compression. The sign of A, separately, decides the reflection.
- Keep each input and multiply each output by : .The −1 multiplies outside the sine, so only the outputs change and every input stays fixed. Each point moves straight across the x-axis to the same distance on the other side. Points with output 0 lie on the x-axis, so they do not move.
- Write the midline and the range . Because , the period is .Multiplying a zero-centered wave by A keeps it centered on y = 0, and its outputs then run from −|A| up to |A|. A only rescales heights, so the period of sine stays 2π. Only A = 0 would flatten the graph to y = 0 with no smallest positive period.
- Read the extremes from the new points. The maximum is 1, at , and the minimum is , at . Check the amplitude: .The maximum and minimum are the highest and lowest outputs, and the range [−1, 1] shows that no output goes beyond them. The amplitude is half the top-to-bottom distance, not the whole distance of 2, and it matches |A| = 1 from step 2. The flip also swaps peak and valley: sin x peaks at x = , so −sin x has its valley there.
- amplitude = |A| = 1. (b) Height unchanged (no vertical stretch, no vertical compression)
- the graph is reflected across the x-axis. (c) (−π, 0), (−, 1), (−, ), (0, 0), (, −), (, −1), (π, 0). (d) Midline y = 0
- range [−1, 1]
- T = 2π. (e) Maximum 1 at x = −
- minimum −1 at x =
- = 1 confirms the amplitude.
Work to write
- Amplitude = |A| = |−1| = 1
- |A| = 1, so no vertical stretch or compression (height unchanged)
- A < 0, so the graph is reflected across the x-axis
- Points of y = −sin x (same inputs, outputs times −1): (−π, 0), (−, 1), (−, ), (0, 0), (, −), (, −1), (π, 0)
- Midline: y = 0
- Range: [−1, 1]
- Period: T = 2π
- Maximum 1 at x = −; minimum −1 at x =
- Check: = 1 = |A|
Rung 3 of 4
Compress by a fraction
This asks for the new size and a sample height in y = sin x. Find amplitude, range, and the output at .
Show the steps and the answer
- , so amplitude and range is .0 < < 1 makes a Vertical compression.
- At .Multiply the numerator by the numerator and denominator by the denominator to scale the known sine height.
- Amplitude = .
- Range = [−, ].
- At , y = .
Rung 4 of 4
Stretch and reflect together
This asks you to separate size from sign in y = −6 sin x. Find amplitude, range, and the heights at and .
Show the steps and the answer
- ; amplitude .The magnitude determines size while the minus sign determines reflection.
- At ; at .The old top becomes the new bottom, and the old bottom becomes the new top.
- Write range and midline .The scaled output extremes are equally far below and above zero.
- Amplitude = 6.
- Range = [−6, 6].
- At , y = −6.
- At , y = 6.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Know cold: Amplitude = |A|. Memory device: Size is the amplitude; sign is the flip. Check with A = −3 and |A| = 3.
- Understand, then rebuild: maximum minus minimum is two equal middle-to-extreme distances. Divide by 2 to recover one distance.
- Put on the cheat sheet: amplitude = |A| = , range [−|A|, |A|], and midline y = 0 for an unshifted wave.
- When comparing two waves, use the ratio of their amplitudes. Amplitude 4 is twice amplitude 2, while both graphs keep period 2π.
7 The trap
A = −3 is a signed coefficient, but Amplitude = |−3| = 3 is a distance. The minus sign describes reflection, not a negative amplitude. The unshifted Midline is y = 0, the x-axis; x = 0 is a vertical line.
Keep in mind
- Amplitude is |A|, a distance, so it is never negative: y = −6 sin x has amplitude 6.
- A changes heights only, so the period stays 2π: y = 6 sin x still peaks at x = .
- Amplitude is half the top-to-bottom gap, not the whole gap: from −6 up to 6 the gap is 12 and the amplitude is 6.
- When |A| is less than 1 the wave shrinks: y = 0.3 sin x only reaches 0.3 and −0.3.
Memory hook
A is the amplifier: a bigger |A| makes a taller wave, and a minus flips it upside down, but the amplitude |A| is never negative.
Flash cards
Say the answer out loud, then flip.
What is amplitude?
- The distance from the middle line up to a peak
- for y = A sin x it is |A|.
Find the amplitude and range of y = 7 sin x.
- Amplitude: 7
- Range (outputs reached): [−7, 7]
A wave centered on y = 0 runs from −2.5 to 2.5. Find its amplitude.
What does a negative A do to the graph?
Is the amplitude of y = −7 sin x equal to −7?
Lesson 3 of 8
3. Omega changes width: derive the period
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Imagine recording the same wheel rider while changing how quickly the rider moves around the circle. If the rider covers twice the turning distance during each step across your page, a full lap finishes in half as much page width. The wave becomes narrower. The number ω, pronounced oh-MAY-guh, multiplies the input inside sine and controls this width. It is another Constant. A large size of ω packs more laps into the same horizontal distance. A small nonzero size spreads a lap over more distance. A negative ω makes the rider move backward, so you must separate its direction from its speed.
Explain it like I am five
Picture the Ferris wheel again, but now it can spin faster or slower. A faster wheel finishes a lap sooner, so one full wave takes less width on the page. The number ω (omega, oh-MAY-guh) in y = sin(ωx) is that speed knob: it multiplies the input x inside the sine.
Example: y = sin(πx), so ω = π. One full wave, a cycle, needs the inside, πx, to grow by 2π. Solve π × T = 2π for the period T, the width of one cycle: divide both sides by π, and T = 2. Check: π × 2 = 2π. Plain sin x needs about 6.28 for a cycle, so this wave is squeezed.
Why T = : a lap is 2π of turning, and the inside turns |ω| (the size of ω, sign dropped) for each 1 unit across, so a lap takes 2π ÷ |ω|. If ω = 0 nothing turns: y = sin 0 = 0 is a flat line, and 2π ÷ 0 has no value, since no number times 0 gives 2π.
2 Picture it
Reminder
Reminder: One full turn, Absolute value, Dividing by a fraction, Canceling a common factor, Solving and substituting, Sine oddness, Nonzero division, Coefficient and input
- One full turn. A full turn is 2π radians; a first top uses radians inside sine.
- Absolute value. |−4| = 4, so the period calculation uses 2π ÷ 4 rather than a negative divisor.
- Dividing by a fraction. 2π ÷ = 2π × = 4π. The reciprocal reverses the original fraction multiplication.
- Canceling a common factor. = because both complete numerator and denominator contain the factor π.
- Solving and substituting. 2T = 2π becomes T = π after division by 2; substitute 2 × π = 2π to verify the distance makes a complete lap.
- Sine oddness. sin(−x) = −sin x; therefore sin(−4x) = −sin(4x). Opposite inside turns give opposite heights.
- Nonzero division. 2π ÷ 0 has no answer because 0 multiplied by any real number is 0 rather than 2π.
- Coefficient and input. In sin(5πx), the coefficient is 5π, not 5. At input , the entire inside becomes 5π × = 2π.
3 Why
One full sine lap requires the inside angle to change by 2π in size. When the outside input advances by T, the inside angle changes by ωT. Therefore |ω|T = 2π, and dividing by |ω| gives T = . If |ω| doubles, T halves; if |ω| halves, T doubles. Negative ω changes the travel direction, but one lap still requires a positive horizontal length. A only scales heights, so it cannot change that width when the graph remains nonconstant.
4 The rule
For , with and : and .
compresses horizontally; stretches horizontally; reverses the input direction. or gives a constant graph without a smallest positive period.
The same idea, five ways
period is two pi divided by the size of omega.
The inside multiplier changes how much horizontal distance is needed for one complete sine cycle.
- y = A sin(ωx)
- |ω|T = 2π
- A ≠ 0 and ω ≠ 0 for a nonconstant wave
A faster rider finishes a lap in less horizontal distance.
The same idea, other ways
In the width 2π, sin x makes one full wave while sin(2x) makes two. The latter's individual cycle width is π.
If you walk around the wheel twice as fast for each horizontal step, you finish a lap in half the distance. At half speed, the lap takes twice the distance.
The inside must advance 2π for a full lap. With ω = , the equation T = 2π requires T = 4π because × 4π = 2π.
Inside lies: a bigger input multiplier makes a smaller width. Check with ω = 2 giving T = π, then ω = giving T = 4π.
Part 1: Horizontal compression
A Horizontal compression packs the same height record into less width. Imagine folding more repeated wallpaper designs into the same wall length. The inside factor 2 makes the circle rider travel 2 radians whenever x advances 1 radian. The full lap therefore needs x to advance only π instead of 2π. Each height feature arrives sooner, but the amplitude stays 1 when no outside height multiplier is added.
- Rule: |ω| > 1 produces Horizontal compression.
- Rule: Horizontal distances are multiplied by .
- Rule: For sin(2x), T = π and amplitude remains 1.
Reminder
Reminder: Canceling a common factor
- Canceling a common factor. = because numerator and denominator share the factor 2.
The same idea, five ways
a larger inside factor squeezes the wave's width.
When |ω| is greater than 1, one cycle takes less than 2π of horizontal distance.
- |ω| > 1
- For ω = 2: T = π
Pack more identical wallpaper designs into the same wall width.
Worked example
Compress width with an original inside factor
This asks for the cycle width of y = sin(6x), then checks whether the height changed.
Show the steps and the answer
- , so .The inside angle moves six times as far as the outside input.
- Substitute T: . The amplitude is .The product checks one full inside turn, while the unchanged outside coefficient leaves heights unchanged.
- Period = .
- Amplitude = 1.
- Horizontal distances are one-sixth their original size.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: Inside lies. Factor 6 inside produces width one-sixth as large.
Part 2: Horizontal stretch
A Horizontal stretch spreads a full height record over more width. Imagine pulling a wallpaper strip longer while keeping its height unchanged. In sin(x), each step in x advances the inside angle only half as far. The rider needs twice the horizontal distance to complete a lap. The first peak moves from to π, and one full cycle moves from width 2π to width 4π. The peak height is still 1.
- Rule: 0 < |ω| < 1 produces Horizontal stretch.
- Rule: For sin(x), T = 4π.
- Rule: Width changes do not change amplitude when A stays fixed.
Reminder
Reminder: Dividing by a fraction
- Dividing by a fraction. 2π ÷ = 2π × = 4π. Multiplication by the reciprocal undoes multiplication by the original fraction.
The same idea, five ways
a smaller nonzero inside factor spreads the wave wider.
An inside multiplier between zero and one in size makes the period larger than 2π.
- 0 < |ω| < 1
- T > 2π
- For ω = : T = 4π
Pull a wallpaper design longer without increasing its height.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Substitute the period into the inside. If it does not give one full turn in size, recompute.
Part 3: Negative omega and nonzero assumptions
A negative ω sends the wheel rider backward, like reversing a walking direction around a track. The traveled direction changes, but the distance for one lap stays positive. Sine's oddness makes sin(−2x) equal −sin(2x), so its graph starts downward. If ω = 0, the rider never moves: the inside angle stays at 0 and every sine output is 0. If A = 0, every height is erased. Either case is a constant line with no smallest positive repeating distance.
- Rule: For sine, sin(−|ω|x) = −sin(|ω|x). Negative omega reflects the input across the y-axis; sine's oddness makes the result also look like an output reflection across the x-axis.
- Rule: T uses |ω|, so ω = −2 gives T = π, never −π.
- Rule: The wave period formula requires A ≠ 0 and ω ≠ 0.
- Rule: A = 0 or ω = 0 makes y = A sin(ωx) identically 0. Every positive shift repeats it, with no least positive one.
Reminder
Reminder: Oddness and absolute value, Division by zero
- Oddness and absolute value. sin(−) = −1 by sin(−x) = −sin x; |−2| = 2 is a positive size.
- Division by zero. 2π ÷ 0 is undefined because no number multiplied by 0 gives the nonzero number 2π.
The same idea, five ways
use omega's size for width and its sign for travel direction.
A negative inside coefficient reverses input direction but gives a positive period for a nonconstant wave.
- A ≠ 0 and ω ≠ 0
- ω = 0 implies y = A sin 0 = 0
A backward lap has a reversed direction but the same track length.
Worked example
Reverse the source compression's direction
This asks for the positive period and first valley of y = sin(−2x). Explain the minus sign separately from the width.
Show the steps and the answer
- , so and .Period is a distance and therefore uses the coefficient's size.
- Use oddness: . At , the inside angle is , giving output .The backward quarter turn reaches the bottom instead of the top.
- Check the full-lap size: .The proposed positive width must advance the inside by one turn in size.
- Period = π.
- First valley: (, −1).
- Amplitude = 1.
- The graph equals −sin(2x).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Check for zero first, then remove omega's sign for the period calculation.
5 How
- Read ω, the entire coefficient multiplying x inside sine. In sin(2x), ω = 2; in sin(x), ω = ; in sin(5πx), ω = 5π.
- Check A ≠ 0 and ω ≠ 0 before calling the graph a nonconstant wave.
- Take |ω| to remove direction. Period (T) measures a positive horizontal length.
- Compute T = 2π ÷ |ω|. Divide by a fraction by multiplying by its reciprocal. Cancel π only when it is a common factor of the full numerator and denominator.
- Compare |ω| with 1. Larger than 1 means Horizontal compression; between 0 and 1 means Horizontal stretch; equal to 1 keeps the original width.
- Check by multiplying the proposed period by |ω|. The product must be 2π, exactly one inside lap.
- If a graph gives T and you need ω, use |ω| = . Choosing ω > 0 gives the convenient representative ω = ; period alone does not determine its sign.
Turn an inside coefficient into a period
- Identify the entire inside coefficient ω.
- Check that A and ω are nonzero.
- Take |ω| and divide 2π by it.
- Reduce fractions and common factors.
- Multiply |ω| by the proposed T to check for one full turn 2π.
6 Worked example
Worked example
Wind turbine blade tip: period from ω, then ω from a period
A wind turbine's blades turn at a steady rate. One blade is 42 m long from the center of the hub to its tip. At time x = 0 seconds that tip is level with the hub's center and moving upward. Its height above the hub's center, in meters, is modeled by y = 42 sin(x). The sine input u = x is the angle, in radians, that the blades have turned. The figure graphs u (vertical axis) against x as a straight line through (0, 0) and (9, 4π). (a) Find the period T of the tip's height, say whether the graph is a horizontal compression or a horizontal stretch of y = 42 sin x, and check T. (b) In lighter wind the rotor slows until one full turn takes 7 seconds, and the tip again starts level with the hub's center and moving upward. Find ω for the new model y = 42 sin(ωx), and say whether its graph is a horizontal compression or stretch of y = 42 sin x.
Show the steps and the answer
- Read as the whole coefficient of x inside sine. In , not and not .The width depends on the entire number multiplying x; the π and the 9 both belong to ω.
- Check that and .Only then is the height a nonconstant wave with a smallest positive period. A = 42 sets how high the tip goes, not how wide one cycle is, so it plays no part in T.
- Take ; is already positive.A period is a positive horizontal length, so only the size of ω matters, not its sign.
- seconds.Sine repeats when its input grows by 2π, and the input grows by |ω| radians per second, so one cycle lasts 2π ÷ |ω| seconds. Dividing by a fraction means multiplying by its reciprocal. π is a factor of both 18π and 4π, so it cancels, and then reduces to .
- Compare with 1: , so the graph is a horizontal compression of . Its period shrinks from s to 4.5 s.|ω| > 1 squeezes one cycle into less than 2π. Use the full value including π: by itself is below 1 and would wrongly suggest a stretch.
- Check: .Across one period the input must advance exactly one lap, 2π radians; any other product means T is wrong.
- Read the line : it rises from 0 at to at . is two laps, so one lap takes seconds, which matches T.The input u is the angle turned, a straight line with slope ω. Each rise of 2π is one full turn of the blade and one cycle of its height.
- For (b), , so . The tip again starts level and rising, so . That gives and the model .|ω| = undoes T = 2π ÷ |ω|. The period alone fixes only |ω|. With A = 42 > 0, a negative ω would make the tip drop first, so the rising start picks ω > 0.
- Compare: , between 0 and 1, so this graph is a horizontal stretch of . Check: .A turn that takes longer than 2π ≈ 6.28 s needs |ω| < 1. The product 2π confirms exactly one lap per period.
- (a) T = = 4.5 seconds
- |ω| = ≈ 1.40 > 1, so the graph is a horizontal compression of y = 42 sin x. (b) ω = ≈ 0.90, giving y = 42 sin(x), a horizontal stretch of y = 42 sin x.
Work to write
- ω = ; A = 42 ≠ 0 and ω ≠ 0, so the graph is a nonconstant wave
- |ω| = ≈ 1.40 > 1 → horizontal compression of y = 42 sin x
- Check: · = 2π
- (b) |ω| = ; the tip rises first, so ω = and y = 42 sin(x)
- ≈ 0.90 < 1 → horizontal stretch; check: 7 · = 2π
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 2
An inside coefficient containing π
This asks for the period of y = sin(5πx). Keep the whole factor 5π as omega, then simplify.
Show the steps and the answer
- Read ; it is positive, so .Both 5 and π multiply x inside sine.
- .The numerator and denominator have the common nonzero factor π, which cancels.
- Substitute: .The computed outside distance must generate one full inside turn.
- ω = 5π.
- Period = .
- Amplitude = 1.
Rung 2 of 2
Negative direction with positive width
This asks for the period and direction of y = sin(−4x). Keep width and sign separate.
Show the steps and the answer
- , so and .The absolute value supplies travel size rather than direction.
- Use oddness: . The curve first goes downward.Backward turns reverse sine's height sign.
- Substitute the period: . At , the inside is , giving .The first calculation confirms one full turn in size; the second confirms the first valley's direction.
- Period = .
- Amplitude = 1.
- First valley: (, −1).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Know cold: divide 2π by the size of omega. Memory device: Inside lies. Larger inside factor means smaller width; check 2 and against periods π and 4π.
- Understand, then rebuild: write |ω|T = 2π, meaning one complete inside lap, then divide by |ω| to recover the period formula.
- Put on the cheat sheet: T = , |ω| = , and the nonzero conditions A ≠ 0, ω ≠ 0.
- A period gives omega's size, not its sign. Choosing the positive representative makes later graph-reading decisions consistent.
- A affects height and ω affects width. Confirm which side of the function name each multiplier occupies before calculating.
7 The trap
The inside multiplier is not the period. For sin(2x), ω = 2 but T = π. Divide 2π by |ω|. A negative ω also gives a positive period because width is a distance, not a direction.
Keep in mind
- The period is not ω itself: y = sin(5x) has ω = 5 but T = .
- Bigger |ω| means a shorter period: |ω| > 1 squeezes the wave and 0 < |ω| < 1 stretches it.
- A negative ω still gives a positive period, because width is a distance: y = sin(−5x) has T = .
- Dividing by a fraction means multiplying by its flip: for ω = , T = 2π × = 7π.
Memory hook
ω is the speed knob: faster spin, shorter wave. One lap is 2π, so the period is T = .
Flash cards
Say the answer out loud, then flip.
What is the period of a wave?
State the period formula for y = A sin(ωx).
Find the period of y = sin(8x).
A cycle is 6 units wide. Find the positive ω.
Does y = sin(−8x) have period −?
- No. Use |ω| = 8, so T =
- a period is always positive.
Lesson 4 of 8
4. Read A and omega before doing arithmetic
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a music player with two separate knobs. One changes how far the speaker moves. The other changes how quickly its movement repeats. A sine equation has two numbers with those separate jobs. The number outside sine, called A, multiplies each output and controls the height. The number multiplying x inside sine, called ω (omega), controls how much input you need for a complete wave. Before calculating anything, point to each number and name its job. A minus sign with no written number means −1. A fraction inside the parentheses belongs to the width knob, even when a different fraction sits outside.
Explain it like I am five
Picture a music player with two separate knobs: one sets how loud, the other sets how fast the beat repeats. In y = A sin(ωx), A is the loudness knob. It sits outside the sine and multiplies every output, so the amplitude, the height from the middle to a peak, is |A|. ω (omega) is the tempo knob. It sits inside, multiplying x, so the period, the width of one wave, is T = .
Example: y = −6 sin(x). Point before you compute. Outside the sine: A = −6. Inside, multiplying x: ω = . Amplitude = |−6| = 6; the minus only flips the wave. Period: T = 2π ÷ . Dividing by a fraction means multiplying by its reciprocal, the fraction turned upside down: T = 2π × = . Check: × = = 2π, one full lap.
Why name them first: A changes outputs and ω changes inputs, so each has its own formula. Mixing them up gives answers like period 6, which uses the loudness knob to set the tempo.
2 Picture it
Reminder
Reminder: Absolute value, Fraction multiplication, Fraction division, Canceling factors, Solving and substituting, Sine values and odd symmetry
- Absolute value. Absolute value is distance from zero: |−| = .
- Fraction multiplication. Multiply tops and bottoms: × = = .
- Fraction division. Keep the first number and flip the divisor: 2π ÷ = 2π × 3 = 6π.
- Canceling factors. π is nonzero, so = . Cancel factors multiplying the entire top and bottom.
- Solving and substituting. 2T = 2π becomes T = π after division by 2. Put it back: 2 × π = 2π.
- Sine values and odd symmetry. sin() = 1 and sin(−) = −1 because sin(−u) = −sin u.
3 Why
Sine itself produces outputs from −1 to 1. Multiplying those outputs by A makes their largest distance from zero |A|. Inside the function, the angle ωx must travel a full 2π for the pattern to repeat. A positive input length T therefore satisfies |ω|T = 2π, so T = . These are different calculations because one number multiplies the output and the other multiplies the input. Naming A and ω first prevents you from using the right formula on the wrong number.
4 The rule
For , with and , amplitude and .
A is outside sine; multiplies x inside sine.
The same idea, five ways
amplitude is the size of the outside number; period is two pi divided by the size of the inside number.
The outside coefficient controls height, and the inside coefficient controls the input length of a cycle.
- y = A sin(ωx)
- amplitude = |A|
- |ω|T = 2π
- range: [−|A|, |A|]
Find the height knob and the speed knob before turning either one.
y = A sin(ωx)
Outside A → amplitude |A|
Inside ω → period 2π ÷ |ω|
Check: |ω|T = 2π
The same idea, other ways
First multiply input x by ω. Next sine converts that angle to a height. Last multiply the height by A. In 6 sin(5x), 5 belongs to the first machine and 6 belongs to the last.
In 6 sin x, the inside coefficient is the unwritten 1. Height becomes 6 but period stays 2π. In sin(5x), height stays 1 but the angle reaches 2π at x = .
Part 1: Outside coefficient A
Treat sine as a machine that has already delivered its height. A multiplies that delivered number. If sine delivers 1 and A = −6, the final height is −6. If sine delivers −1, the final height is 6. This flips the wave and makes its largest distance from the middle 6. The sign tells direction; absolute value tells size.
- Rule: A multiplies every sine output.
- Rule: Amplitude = |A| and range = [−|A|, |A|].
- Rule: A < 0 reflects heights across the x-axis, whose equation is y = 0.
Reminder
Reminder: Signed multiplication
- Signed multiplication. A negative times a negative is positive: −6 × (−1) = 6.
The same idea, five ways
A multiplies the height after sine is evaluated.
The outside coefficient scales the outputs.
- y = A × sin(ωx)
- amplitude = |A|
Multiply every reading on a height gauge by the same number.
Worked example
Read a negative outside coefficient
For y = −6 sin(5x), find A, amplitude, and range. This asks how the outputs are multiplied and which heights are achieved.
Show the steps and the answer
- .−6 is outside sine and multiplies its output.
- Amplitude .Amplitude is a distance, so the sign does not make it negative.
- At and .Substitution exhibits the lowest output.
- At and . The range is .These inputs reach both endpoints, and sine never exceeds its own range.
- Amplitude = 6.
- Range = [−6, 6].
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- copy A with its sign, then use absolute value for amplitude.
Part 2: Inside coefficient ω
The inside coefficient changes the angle before sine sees it. If x moves forward 1 unit and ω = , the angle moves forward only of a radian. More input distance is needed for a full turn. In sin(4πx), the entire product 4π is ω. Keep π because it also multiplies x.
- Rule: ω is the entire factor multiplying x inside sine.
- Rule: For a nonconstant wave, T = 2π ÷ |ω| and |ω|T = 2π.
- Rule: Negative ω reverses the angle's direction; period length stays positive.
Reminder
Reminder: Fraction division
- Fraction division.
The same idea, five ways
omega gives the angle change per input unit.
The inside coefficient controls how quickly the angle completes a turn.
- angle = ωx
A slower wheel needs more time to complete a revolution.
Worked example
Solve for a full cycle length
Find ω and the period of y = sin(x). This asks how quickly the angle changes and how much x must change for one cycle.
Show the steps and the answer
- .The entire fraction multiplies x.
- .This equation finds the positive input length needed for one angular turn.
- Multiply both sides by : .The product × is 1, removing the coefficient of T.
- Put T back: .Substitution verifies that this length supplies exactly a full turn.
- Period = 5π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- circle every factor multiplying x inside the parentheses. Together they form ω.
5 How
- Write any missing coefficient: −sin(...) means −1 × sin(...), and sin x means 1 × sin(1x).
- Copy A from outside sine and the entire ω from the factor multiplying x inside. Keep their signs here.
- Use |A| for amplitude and |ω| for the period calculation.
- Calculate T = 2π ÷ |ω|. Dividing by a fraction multiplies by its reciprocal, meaning its upside down version.
- Put T back into |ω|T = 2π to check the complete turn. The range is [−|A|, |A|].
Find amplitude and period from the coefficients
- Name A and ω before arithmetic.
- Use |A| for amplitude and 2π ÷ |ω| for period.
- Multiply |ω| by the proposed T to recover 2π.
6 Worked example
Worked example
A buoy in long swells: read A and ω before the arithmetic
A marker buoy rides long ocean swells. Its height above its calm-water level, in meters, x seconds after a lifeguard starts a stopwatch, is modeled by y = −sin(). A negative y means the buoy is below calm-water level. Match the model to y = A sin(ωx) and state A and ω before doing any arithmetic. Then find the amplitude, the period T (the time for one complete cycle) and the range of the buoy's heights.
Show the steps and the answer
- Write the hidden coefficients: is .A minus sign in front of sin with no number shown means −1 × sin(...). Inside, means 2x ÷ 5, which equals × x. So the number multiplying x is the fraction .
- Copy the coefficients with their signs: (outside sine) and (the entire factor multiplying x inside sine).The rule needs the whole factor on x, not just the 2 on top or the 5 underneath. Reading ω as 2 or as 5 would give the wrong period. Writing A = −1 with its sign records exactly what the model says before deciding what the sign does.
- Amplitude m. For the period, use .Amplitude is a distance from the center line (calm-water level), so it is never negative. The minus sign only flips the wave: the buoy dips first instead of rising first, but it still moves 1 m each way. ω is already positive, so |ω| is the same number.
- s.Dividing by the fraction is the same as multiplying by its reciprocal , which is the fraction turned upside down. Because |ω| is less than 1, the cycle is stretched to longer than 2π.
- Check the complete turn: . Range .Over one period the input to sine, x, must grow by exactly 2π, which is one complete turn. It does, so T = 5π is right. The outputs of sine stay between −1 and 1, and multiplying by A = −1 only swaps their signs. So y also stays between −1 and 1, which means the buoy is never more than 1 m below or above calm-water level.
Work to write
- y = −1 × sin(x), so A = −1 and ω =
- amplitude = |A| = |−1| = 1 m
- check: × 5π = 2π
- range = [−1, 1] (from 1 m below to 1 m above calm-water level)
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
An unwritten inside coefficient
Find amplitude and period of y = 6 sin x. Find the height above the middle and the length of a cycle.
Show the steps and the answer
- Write 6 sin(1x), so and .An unwritten coefficient is 1.
- Amplitude .The outside size controls height.
- .The ordinary sine angle needs a full 2π.
- Put T back: .This verifies the full turn.
- Amplitude = 6.
- Period = 2π.
Rung 2 of 5
Two whole number coefficients
Find amplitude and period of y = 7 sin(5x). The two requested lengths have different coefficients.
Show the steps and the answer
- and .7 is outside sine, and 5 is inside.
- Amplitude .The outside coefficient is positive.
- .Five times the input needs one fifth of the ordinary length for a turn.
- Put T back: .This verifies the complete turn.
- Amplitude = 7.
- Period = .
Rung 3 of 5
Negative height and fractional width
Find amplitude and period of y = − sin(x). Both answers are positive lengths.
Show the steps and the answer
- and .Outside and inside fractions have separate jobs.
- Amplitude .The negative sign reflects heights, but distance is positive.
- .Flip the divisor and cancel the factor 2.
- Put T back: .This confirms the proposed period.
- Amplitude = .
- Period = 7π.
Rung 4 of 5
An inside coefficient containing π
Find amplitude and period of y = sin(4πx). Keep the entire 4π as ω.
Show the steps and the answer
- and .π is a factor multiplying x.
- Amplitude .The outside number is positive.
- .Cancel π, then reduce by 2.
- Put T back: .This verifies that one half input unit gives a full angular turn.
- Amplitude = .
- Period = .
Rung 5 of 5
Two negative coefficients
Find amplitude and period of y = − sin(−x). Separate both signs from the sizes before calculating.
Show the steps and the answer
- and .The first sign belongs to the output and the second to the input.
- Amplitude and .Lengths use absolute values.
- .Flip the whole divisor, then cancel π.
- Put T back: .This confirms the positive full turn distance.
- Rewrite as .Sine is odd, so the negative inside gives another minus, canceling the outside one.
- Amplitude = .
- Period = .
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- outside controls height; inside controls how quickly the angle turns.
- write A and ω before arithmetic, and check |ω|T = 2π afterward.
- a missing coefficient is 1, and a lone minus sign means −1.
7 The trap
Using the outside number as period, or treating π as decoration inside sine. Copy A and the entire ω before applying their separate formulas.
Keep in mind
- A minus sign with no number in front means A = −1: y = −sin(5x) has amplitude 1.
- π inside belongs to ω: in y = 9 sin(4πx), ω = 4π and T = = .
- A fraction outside sets height and a fraction inside sets width: y = sin(x) has amplitude and period 2π × 6 = 12π.
- Signs never make these answers negative: amplitude uses |A| and the period uses |ω|.
Memory hook
Outside sets height, inside sets width: A stands alone outside the sine (amplitude |A|); ω sits with x inside (period ).
Flash cards
Say the answer out loud, then flip.
In y = A sin(ωx), which number sets the height, and where does it sit?
- A, outside the sine
- the amplitude is |A|.
Find the amplitude and period of y = −sin(7x).
- Amplitude: 1
- Period:
What is the reciprocal of ?
Find the amplitude and period of y = sin(2πx).
- Amplitude:
- Period: = 1
In y = 10 sin(πx), can you ignore the π?
Lesson 5 of 8
5. Cofunctions: change the partner and subtract the angle
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Imagine looking at the same ladder from its two pointed corners. From the floor corner, the wall is across from you. From the wall corner, the floor is across from you. The corners add to 90°, and the two legs trade jobs. That trade creates Cofunctions, three pairs of trig functions that give the same value at matching angles. Sine pairs with cosine, tangent with cotangent, and secant with cosecant. To change partners, subtract the old angle from a quarter turn. Use 90° for degrees or for radians. The result may be negative; the identity works wherever both functions are defined.
Explain it like I am five
Picture a ladder leaning against a wall. With the floor it makes a right triangle, a triangle with one square corner of 90°. The two pointed corners share the other 90°: if the floor corner is 35°, the top corner is 90° − 35° = 55°.
Stand at the floor corner. The wall height is opposite you, so sin 35° = , by SOH: opposite over hypotenuse, the ladder. Now stand at the top corner. The same wall height is adjacent, next to you, so cos 55° = , by CAH. Same fraction, so sin 35° = cos 55°; a calculator gives about 0.5736 for both. This swap gives the cofunction pairs: sine and cosine, tangent and cotangent, secant and cosecant. The co means complement: the two angles add to 90°.
The rule: switch to the partner and replace the angle x by − x in radians, or 90° − x in degrees. Example: tan() = cot( − ). With a common bottom, − = , so tan() = cot().
2 Picture it
tan x = cot( − x); cot x = tan( − x)
sec x = csc( − x); csc x = sec( − x)
Use 90° in degrees. Both sides must be defined.
Reminder
Reminder: Degrees and radians, Common denominators, Signed subtraction, SOH CAH TOA, Quotients and reciprocals, Rationalizing, Quadrant signs
- Degrees and radians. 90° and name the same quarter turn, but each subtraction needs one unit: − uses radians.
- Common denominators. = and = , giving difference −.
- Signed subtraction. 90 − 110 = −20. Subtracting a negative reverses that move: 90 − (−20) = 110.
- SOH CAH TOA. Sine is opposite over hypotenuse, cosine is adjacent over hypotenuse, and tangent is opposite over adjacent. sin 30° = .
- Quotients and reciprocals. tan θ = , cot θ = , sec θ = , and csc θ = . At 45°, sec and csc both equal .
- Rationalizing. = after multiplying top and bottom by .
- Quadrant signs. In Quadrant II sine is positive and cosine negative, so cotangent is negative; at an axis is undefined.
3 Why
A triangle's angles total 180°. The right angle uses 90°, leaving 90° for the two acute angles. Changing corners exchanges opposite and adjacent while keeping the hypotenuse. Thus opposite over hypotenuse at one corner equals adjacent over hypotenuse at the other. The other pairs follow from the same exchange. Beyond triangle angles, the unit circle gives the same exchange: the point at − x has coordinates (sin x, cos x). Swapping those coordinates produces the identities. A zero denominator still has no value, so an identity cannot turn an undefined expression into a number.
4 The rule
Wherever both sides are defined: , and .
For degree angles, replace with throughout.
The same idea, five ways
switch to the cofunction and subtract the old angle from a quarter turn.
A function of an angle equals its cofunction at the complementary argument, wherever both expressions have values.
- α + β = 90°
- sin α = cos β
- tan α = cot β
- sec α = csc β
From the other ladder corner, across from and next to exchange jobs.
The same idea, other ways
From the floor corner, sine is wall height over ladder length. From the wall corner, cosine is the same wall height over ladder length. The same fraction has two names at complementary angles.
30° and 60° add to 90°. sin 30° = cos 60° = . tan 30° = cot 60° = . The same triangle sides supply each matching ratio.
At angle x the unit circle point is (cos x, sin x). Reflect it across the diagonal where the two coordinates are equal. This changes angle x to − x and swaps the coordinates. Its horizontal coordinate is now sin x and its vertical coordinate is now cos x. This argument includes negative and larger angles. Reflection across the diagonal sends the rightward axis to the upward axis and reverses counterclockwise turning to clockwise turning. Starting at and turning clockwise by x therefore gives the reflected signed angle − x. This also applies to negative or larger turns. The argument follows from the changed direction as well as the swapped coordinates.
At x: (cos x, sin x)
At − x: (sin x, cos x)
The coordinates exchange jobs.
Part 1: Sine and cosine
A right triangle's two acute corners are Complementary angles because their sum is 90°. A leg opposite one corner is adjacent to the other. Dividing the same leg by the unchanged hypotenuse gives sine from the first corner and cosine from the second. At general angles, the unit circle's coordinate exchange gives the same relation.
- Rule: sin x = cos( − x) and cos x = sin( − x).
- Rule: In degrees the new argument is 90° − x.
- Rule: Sine and cosine exist at every real angle.
Reminder
Reminder: Complement arithmetic
- Complement arithmetic. 27° + β = 90° becomes β = 63° after subtracting 27°; 27° + 63° checks it.
The same idea, five ways
sine becomes cosine at the quarter turn minus the old angle.
Sine and cosine exchange when their arguments total a quarter turn.
- sin α = cos β
- cos α = sin β
One leg is across from one corner and beside the other.
Worked example
Change cosine to sine in degrees
Rewrite cos 27° as sine of another angle. Find an equal partner expression, not a decimal.
Show the steps and the answer
- Choose sine and set .The partner argument must complete the quarter turn.
- .Subtract the old angle to find the new one.
- Put it back: .This verifies the argument.
- .The cofunction identity applies, and both expressions are defined.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- switch both the function name and the argument.
Part 2: Tangent and cotangent
Tangent compares opposite with adjacent. Cotangent reverses that comparison at the same corner. Moving to the other acute corner also swaps the legs' names. The two reversals cancel, making tangent at one corner equal to cotangent at the complementary corner. At general angles use the coordinate fractions and remember that a zero denominator gives an Undefined expression.
- Rule: tan x = cot( − x) and cot x = tan( − x), wherever defined.
- Rule: tan x = and cot x = .
- Rule: Tangent needs nonzero cosine; cotangent needs nonzero sine.
Reminder
Reminder: Division by zero
- Division by zero. = 0, but is undefined. Check the bottom.
The same idea, five ways
tangent pairs with cotangent at the complementary argument.
Changing corners and reversing the leg ratio gives the same value.
- tan α = cot β
- cot α = tan β
Swapping labels and reversing the comparison returns the original ratio.
tan α = opposite ÷ adjacent
The other corner exchanges the legs.
cot β uses the original ratio.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- at an axis angle, check the quotient denominator before writing a value.
Part 3: Secant and cosecant
Secant is the reciprocal of cosine, and cosecant is the reciprocal of sine. A reciprocal divides 1 by the original number. Equal nonzero cosine and sine values have equal reciprocals. The triangle gives the same explanation: hypotenuse over adjacent at one corner becomes hypotenuse over opposite at the other. If the original value is zero, its reciprocal is undefined.
- Rule: sec x = csc( − x) and csc x = sec( − x), wherever defined.
- Rule: sec x = and csc x = .
- Rule: Zero has no reciprocal.
Reminder
Reminder: Reciprocals
- Reciprocals. 1 ÷ = 2, but zero has no reciprocal.
The same idea, five ways
secant pairs with cosecant at the quarter turn minus the old angle.
Equal nonzero sine and cosine values have equal reciprocals.
- sec α = csc β
- csc α = sec β
Turn equal nonzero fractions upside down and they stay equal.
cos α = sin β
sec α = csc β, when defined
Worked example
A negative cosecant partner argument
Rewrite csc() as secant of another angle. A negative complementary argument is allowed.
Show the steps and the answer
- Set .This finds the missing secant argument.
- .Common tenths allow subtraction, giving a negative result.
- Put it back: .This verifies the argument.
- .The first angle has nonzero sine in Quadrant II, and the second has nonzero cosine in Quadrant IV.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- check the underlying cosine for secant and sine for cosecant before taking a reciprocal.
5 How
- Choose the partner: sine with cosine, tangent with cotangent, or secant with cosecant.
- Use 90° for degree angles and for radian angles.
- Subtract the old angle from that quarter turn. For radian fractions, make the denominators match first.
- Write the partner at the resulting angle. Keep any negative result.
- Add the old and new arguments to check their quarter turn sum. Check that both functions are defined.
Fill a cofunction angle blank
- Choose the function's partner.
- Subtract the old angle from the quarter turn in the same unit.
- Keep the sign, check the sum, and check the denominator.
6 Worked example
Worked example
Secant to cosecant when the angle is past a quarter turn
The figure shows the angle radians, which is 144°, in standard position. Use a cofunction identity to rewrite sec() as the cosecant of a single angle in radians. Write that angle as a fraction of π in lowest terms. Show the subtraction with matching denominators. Then check that the old and new angles add to a quarter turn and that both functions are defined.
Show the steps and the answer
- Choose the partner. Secant pairs with cosecant, so the answer will have the form csc(new angle).The cofunction pairs are sine with cosine, tangent with cotangent, and secant with cosecant. The rule sec x = csc( − x) turns a secant into a cosecant.
- Use the quarter turn : . is a radian measure, so the quarter turn must be in radians too. The 144° in the figure is the same angle, but 90° − would mix degrees with radians.
- Make the denominators match: and .Fractions can be subtracted only over a common denominator. 10 is the least common multiple of 2 and 5, so multiply the top and bottom of by 5, and the top and bottom of by 2.
- Subtract the old angle from the quarter turn: .The rule is quarter turn minus old angle, in that order. is larger than , and the figure shows the angle already past a quarter turn, so the difference is negative. Reversing the order would give , which has the wrong sign. is in lowest terms because 3 and 10 have no common factor.
- Write the partner at the new angle and keep the sign: .The partner is evaluated at exactly the result of the subtraction, minus sign included. Dropping the sign would change the value. sec() is negative because cosine is negative in Quadrant II. csc() is positive because lies in Quadrant I, where sine is positive.
- Check the quarter-turn sum: .The old and new arguments of a cofunction pair always add to a quarter turn. Getting exactly confirms both the subtraction and its sign.
- Check that both functions are defined. Because , the angle ends inside Quadrant II, off the y-axis, so . Because , the angle ends inside Quadrant IV, off the x-axis, so .The identity holds only where both sides are defined. sec x = needs cos x ≠ 0, and csc x = needs sin x ≠ 0. An angle whose terminal side lies strictly inside a quadrant has nonzero sine and nonzero cosine.
Work to write
- sec() = csc( − )
- sec() = csc(−)
- Check: + (−) = − = =
- cos() ≠ 0 and sin(−) ≠ 0, so both sides are defined
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 6
Degree subtraction
Rewrite sin 18° as cosine. Find the angle in the partner expression.
Show the steps and the answer
- Choose cosine and set .Degrees need a 90° quarter turn.
- .Subtracting isolates the new angle.
- Put it back: .The sum checks the complement.
- .Sine and cosine are the correct pair and both are defined.
Rung 2 of 6
Reciprocal functions in degrees
Rewrite sec 32° as cosecant. Find and check its argument.
Show the steps and the answer
- Choose cosecant and set .Secant pairs with cosecant.
- .This finds the partner angle.
- Put it back: .The sum verifies the argument.
- .Cosine at 32° and sine at 58° are equal and positive, so their reciprocals are defined.
Rung 3 of 6
A radian common denominator
Rewrite cot() as tangent. The partner argument must be in radians.
Show the steps and the answer
- Choose tangent and set .The arguments total a radian quarter turn.
- .Rewrite the quarter turn in tenths, subtract, and reduce by 2.
- Put it back: .This verifies the missing argument.
- .Both acute arguments have nonzero denominators.
Rung 4 of 6
Unequal denominators and a larger numerator
Rewrite cos() as sine. Carry the numerator 2 through the subtraction.
Show the steps and the answer
- Choose sine and set .This finds the complementary sine argument.
- .Both fractions must describe equal sized tenths before subtraction.
- Put it back: .The sum verifies the new argument.
- .Sine and cosine are defined at every real angle.
Rung 5 of 6
A negative radian result
Rewrite cot() as tangent. The old angle is greater than a quarter turn.
Show the steps and the answer
- Choose tangent and set .The identity still uses a quarter turn beyond acute triangle angles.
- .Six twelfths minus seven twelfths leaves a negative twelfth.
- Put it back: .The negative sign is necessary for the required sum.
- .The first angle has nonzero sine in Quadrant II, and the second has nonzero cosine in Quadrant IV.
Rung 6 of 6
A negative reciprocal partner
Rewrite csc 143° as secant. Explain why its negative argument is allowed.
Show the steps and the answer
csc 143° = sec(−53°)
- Choose secant and set .Cosecant pairs with secant at a quarter turn sum.
- .The old angle is 53° beyond the quarter turn.
- Put it back: .This verifies the negative partner argument.
- .Sine in Quadrant II and cosine in Quadrant IV are positive and nonzero here, so both reciprocals exist.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- remember the three pairs, then rebuild the angle by subtraction.
- check that the two arguments add to a quarter turn instead of evaluating unfamiliar trig values.
- keep the six identities on the cheat sheet; individual complement answers can be rebuilt.
- a negative partner argument is expected when the original argument exceeds a quarter turn.
7 The trap
Changing the function name but keeping the old angle, or subtracting radians from 90°. Change name and argument, using one angle unit throughout.
Keep in mind
- Change both the name and the angle: sin 35° = cos 55°, not cos 35°.
- Stay in one unit: subtract degrees from 90° and radians from , never from 90°.
- LHS and RHS mean the left-hand side and the right-hand side of the equals sign: in sin 35° = cos 55°, the LHS is sin 35° and the RHS is cos 55°.
- A cofunction identity, an equation true for every allowed angle, holds only where both sides are defined, because a fraction with 0 on the bottom has no value: 6 ÷ 0 would need a number that times 0 gives 6, and none exists.
Memory hook
Co means complement: a cofunction trades sine for cosine, tan for cot, sec for csc, and trades the angle x for 90° − x.
Flash cards
Say the answer out loud, then flip.
What are the three cofunction pairs?
- sine and cosine
- tangent and cotangent
- secant and cosecant
What does the co in cofunction stand for?
Fill the blank: sin 28° = cos ___
Fill the blank: sec() = csc ___
Fill the blank: cos 125° = sin ___. Is a negative answer allowed?
- −35°, from 90° − 125°
- yes, the identity works for negative angles.
Lesson 7 of 8
7. Sketch a complete cycle with five key points
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Imagine drawing one hill and one valley on a strip of wallpaper. You do not need a dot at every possible place. You need a few reliable landmarks, then a smooth line between them. A wave works the same way. Its key points are five landmarks that divide one complete repeat, called a cycle, into four equal steps. The period is the width of that repeat. The amplitude is the distance from the middle to the top. You find the five horizontal positions from the period, then choose the heights from the sine or cosine pattern. After that, you can copy the finished cycle across the page.
Explain it like I am five
Picture drawing one hill and one valley on a strip of wallpaper. You need only five landmark dots and a smooth curve through them. These landmarks, the key points, split one cycle (one full repeat of the wave) into four equal steps.
Example: y = 6 cos(πx). A = 6, so the amplitude, the middle-to-top height, is 6. ω = π, so the period T, the width of one cycle, is = 2. Each step is a quarter period: = = . The inputs are 0, , 1, , 2. Cosine's heights go top, middle, bottom, middle, top: 1, 0, −1, 0, 1. Multiply each by A = 6: 6, 0, −6, 0, 6. The key points are (0, 6), (, 0), (1, −6), (, 0) and (2, 6).
Join them with a smooth, rounded curve. Why these five: at those inputs the inside, πx, equals 0, , π, and 2π, the quarter turns where cosine is 1, 0, −1, 0, 1. To draw more, copy the cycle every 2 units.
2 Picture it
Reminder
Reminder: Input, output, and ordered pair, Radian and unit circle, Absolute value, Signed multiplication, Divide fractions, Divide by a whole number, Solve and substitute, Closed intervals, Sine and cosine signs, Negative inputs, Exact value
- Input, output, and ordered pair. A point (x, y) places x horizontally and y vertically: for y = 6 sin x, x = gives y = 6, so plot (, 6).
- Radian and unit circle. One quarter-turn is radians; at it, sin() = 1 and cos() = 0.
- Absolute value. Amplitude is a distance: |−4| = 4.
- Signed multiplication. A negative times a negative is positive: −4 × (−1) = 4.
- Divide fractions. Divide by a fraction by multiplying by its reciprocal: 2π ÷ = 2π × = 3π.
- Divide by a whole number.
- Solve and substitute. To find a full cycle for ω = 3, solve 3T = 2π to get T = ; plugging back gives 3 × = 2π.
- Closed intervals. [0, 3π] means 0 ≤ x ≤ 3π, including both endpoints.
- Sine and cosine signs. sin() = −1, while cos π = −1. A negative A reverses those outputs.
- Negative inputs. sin(−u) = −sin u and cos(−u) = cos u: sin(−) = −1 and cos(−π) = −1.
- Exact value. Keep π exact in calculations: is exact, while its decimal would be rounded.
3 Why
One turn around the unit circle contains four quarter-turns. At those quarter-turns, sine and cosine have outputs 0, 1, or −1. Multiplying x by ω changes where these angles occur but preserves their order when ω > 0. Multiplying the outputs by A changes their heights. Therefore the five transformed points remain equally spaced by , and direct substitution produces their heights. The connecting curve stays smooth because the circle coordinates change continuously.
4 The rule
For and or has .
Use the input columns 0, , T in the key-point picture. Multiply the parent heights by A, connect smoothly, and repeat every T.
The same idea, five ways
find one repeat, split its width into quarters, and draw the five landmarks.
The five key points divide a complete sine or cosine cycle into four equal horizontal steps.
- Quarter period =
- y = A sin(ωx) or y = A cos(ωx)
- One cycle: 0 ≤ x ≤ T, or [0, T]
Place evenly spaced fence posts, then run a smooth ribbon through their chosen heights.
The same idea, other ways
The graph is a road with five landmarks: a starting position, a quarter-cycle position, a halfway position, a three-quarter position, and the matching endpoint.
If T = 12, the quarter period is 12 ÷ 4 = 3. For y = sin(x), each step of 3 makes the inside angle advance by . The picture holds the input/output pairs.
Part 1: Sine key-point pattern
For positive sine, you begin at the middle, climb to the top, return to the middle, descend to the bottom, and return to the middle. Think of one rise and one fall on a ribbon. Multiplying all heights by a negative A reflects the ribbon across y = 0. It then begins by going down. Read heights from the table instead of guessing the curve.
- Rule: For y = A sin(ωx), A ≠ 0, ω > 0, use the sine heights in the five-column picture.
- Rule: Positive A starts at the middle going up; negative A starts at the middle going down.
The same idea, five ways
middle, high, middle, low, middle for positive sine.
Sine begins on the middle line and its sign chooses whether it initially rises or falls.
- y = A sin(ωx), A ≠ 0, ω > 0
- f(0) = 0
Walk away from the middle floor, return, walk below it, then return again.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: sine starts at the center. Keep A's sign beside your height row.
Part 2: Cosine key-point pattern
For positive cosine, you begin at the top, pass through the middle, reach the bottom, pass through the middle again, and return to the top. This is like starting a ride at its highest seat instead of at the side. The same quarter-period spacing still works. If A is negative, every height reverses and you start at the bottom.
- Rule: For y = A cos(ωx), A ≠ 0, ω > 0, multiply the parent cosine heights 1, 0, −1, 0, 1 by A.
- Rule: Positive A begins at the top; negative A begins at the bottom.
The same idea, five ways
high, middle, low, middle, high for positive cosine.
Cosine begins at an extreme, and A's sign selects the top or bottom.
- y = A cos(ωx), A ≠ 0, ω > 0
- f(0) = A
Begin a rocking movement at its farthest position instead of at the center.
Worked example
The cosine pattern with an output multiplier
Sketch y = 6 cos x on 0 ≤ x ≤ 2π. This asks you to draw one cycle that has the cosine shape but reaches six units from its middle.
Show the steps and the answer
- Read and . The amplitude is 6 and .The outside multiplier changes heights, while the inside coefficient leaves the cycle width unchanged.
- Compute the quarter period .Four steps of this size complete the cycle.
- Multiply every parent cosine output by 6 and use the output row in the table.Cosine's circle coordinate starts at 1, passes through 0, reaches −1, passes through 0, and returns to 1.
- Start at the top, plot the table columns, and connect smoothly.Positive cosine begins at its maximum, so it does not begin at the origin.
- Amplitude = 6
- Period = 2π
- Quarter period =
- The curve starts and ends at y = 6.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: cosine starts at the crest when A is positive. Substitute x = 0 to check.
Part 3: Repeating the cycle
A finished cycle is a pattern you can stamp again. To move a point one cycle to the right, add T to its input while keeping its height. To move it left, subtract T. This is like copying a wallpaper strip next to itself. At each shared endpoint, the copied curve continues in the same direction. The period tells you the stamp's width.
- Rule: For every integer k, f(x + kT) = f(x). An integer is a whole-number count such as −2, −1, 0, 1, 2.
- Rule: Copy (x, y) to (x + kT, y). The vertical coordinate stays unchanged.
The same idea, five ways
add one period to the input and keep the output.
A periodic function repeats its entire pattern after every full period.
- f(x + kT) = f(x), k an integer
- (x, y) becomes (x + kT, y)
- For these waves, T =
Copy one tile beside itself without stretching or turning it.
Worked example
Move a cycle left and right
Sketch y = 2 sin(3x) on − ≤ x ≤ . This asks you to show three complete cycles by copying one correct cycle across the requested interval.
Show the steps and the answer
- Read and . Find amplitude and .A controls height and ω determines how far x travels while the inside angle makes one turn.
- Compute . Use the five columns from through for the middle cycle.Five quarter-spaced points give one complete sine cycle.
- Copy each point once to the left by subtracting from its input, and once to the right by adding . Keep its height unchanged. For example, copy left: , giving . Copy it right: , giving . Only the horizontal coordinate changes.Adding a full period changes the inside angle by 2π, which returns to the same place on the circle.
- Use the extended table and connect all the points smoothly.The interval length is − (−) = 2π = 3 × , so exactly three cycles fit.
- Amplitude = 2
- Period =
- Quarter period =
- Three full cycles fill [−, ].
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- A matching zero alone does not prove a full repeat. Match its direction as well.
5 How
- Check A and ω for zero. If the graph is nonconstant and ω is negative, rewrite using sin(−u) = −sin u or cos(−u) = cos u to obtain positive ω. Then copy the resulting signed A and positive ω. Find amplitude |A| and T = .
- Divide T by 4 to find the quarter period. Put its successive multiples in an input/output table.
- Use the sine or cosine parent heights and multiply each by A. The table is the point-plotting plan.
- Draw each column as an ordered pair. Join the points smoothly, with rounded tops and bottoms.
- If the requested interval spans several cycles, copy the points by adding or subtracting T from each input. Do not change their heights.
Sketch a wave from its equation
- Write A, ω, |A|, T, and .
- Draw the five-column table using sine or cosine heights. Multiply each parent height by the signed A exactly once; a negative A already performs the reflection.
- Plot the points and connect smoothly. Copy by T to cover the requested interval.
6 Worked example
Worked example
A complete reflected sine cycle
Sketch y = −4 sin(x) for 0 ≤ x ≤ 3π. This asks you to draw one whole wave, with its five key points, and state its amplitude and period.
Show the steps and the answer
- Read and . The amplitude is .A multiplies the output, so the negative sign reflects the wave while the distance from its middle remains positive.
- Find .A full cycle makes the inside angle advance by 2π.
- Find the quarter period: . Use successive multiples of this spacing in the table. Start with 0. One gap gives . Two gaps give . Three gaps give . Four gaps give . These are the input columns in the picture.Four equal steps span one whole period.
- Multiply the sine heights by . The table shows the reflected heights in their matching columns.The sine quarter-turn heights are shown in the pattern table. Multiplying each height by −4 reflects it across the middle line.
- Plot the table columns as ordered pairs and join them with a smooth curve. Begin at the middle and travel downward.The sine function changes continuously between its key points; straight segments would change the shape.
- Amplitude = 4
- Period T = 3π
- Quarter period =
- One cycle begins at the middle going down and returns to the middle going down at x = 3π.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Make a sine cycle taller
Sketch y = 6 sin x on 0 ≤ x ≤ 2π. You are keeping the ordinary sine width and making its heights six times as large.
Show the steps and the answer
- Read and . Amplitude and .A scales output heights, and an inside coefficient of 1 leaves the period unchanged.
- Compute . Use the table's x-row.Four quarter-steps span 2π.
- Multiply the parent sine outputs by 6 and plot the columns.Every y-value is multiplied by the outside coefficient.
- Draw a smooth curve through the points, starting at the middle going up.Positive sine keeps its starting direction.
- Amplitude = 6
- Period = 2π
- Quarter period =
- The maximum is 6 and the minimum is −6.
Rung 2 of 4
A wider cosine cycle
Sketch y = cos(x) on 0 ≤ x ≤ 10π. You are stretching the cosine cycle horizontally while keeping its height unchanged.
Show the steps and the answer
- Read and . Amplitude .Only the inside coefficient changed.
- Find .Dividing by one fifth multiplies by five.
- Compute . Use the table's input columns.Each horizontal step is a quarter of the new width.
- Use the ordinary cosine outputs and join the five points smoothly.An inside multiplier moves the x-locations but does not multiply the output heights.
- Amplitude = 1
- Period = 10π
- Quarter period =
- The cycle starts at the top.
Rung 3 of 4
Reflect and compress a sine wave
Sketch y = − sin(4x) on 0 ≤ x ≤ . You need one short cycle with a reflection and a fractional amplitude.
Show the steps and the answer
- Read and . Amplitude .Amplitude measures distance, so it uses the size of A rather than its sign.
- Find and .Dividing a fraction by 4 multiplies its denominator by 4.
- Put successive quarter-period inputs in the table and multiply the sine outputs by .The negative multiplier reverses the heights, while 4 compresses their horizontal spacing.
- Join the five points smoothly, beginning at the middle going down.Reflected sine crosses the middle in the opposite direction from positive sine.
- Amplitude =
- Period =
- Quarter period =
- The sine cycle is reflected across y = 0.
Rung 4 of 4
Reflected cosine with π inside
Sketch y = − cos(x) on 0 ≤ x ≤ 6. This asks you to combine a fractional height, a reflection, and a cycle width measured by an ordinary number.
Show the steps and the answer
- Read and . The amplitude is .The minus sign chooses the reflection, while absolute value gives the height.
- Find .Dividing by a fraction multiplies by its reciprocal, and π cancels because π is nonzero.
- Compute . Use the quarter-spaced inputs in the table.The period is 6, so the graph's input labels are ordinary numbers even though its inside angles are radians.
- Multiply the cosine output row by , plot the columns, and connect smoothly.Negative cosine begins at its minimum and returns there after a complete cycle.
- Amplitude =
- Period = 6
- Quarter period =
- The cycle starts at the bottom.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: five points, four gaps. The number of gaps explains why you divide T by 4.
- Rebuild the height rows from the circle instead of memorizing many transformed graphs.
- Cheat sheet tip: Write T = , quarter period = , and the signed five-point tables.
- Mark the middle as y = 0. The equation x = 0 names the vertical axis.
7 The trap
Drawing straight segments between the key points makes a zigzag. These points locate a smooth sinusoidal function, so round the turns and cross the middle smoothly.
Keep in mind
- The five inputs are always 0, , , and T: four equal steps across one period.
- Copy a finished cycle by adding T to every input and keeping the heights: for y = 6 cos(πx), the next top is at (2 + 2, 6) = (4, 6).
- A negative A flips every height: y = −6 cos(πx) starts at the bottom, (0, −6).
- Round the tops and bottoms, because straight segments between key points make a zigzag, the wrong shape.
Memory hook
Five points, four equal steps of . Sine: middle, top, middle, bottom, middle. Cosine: top, middle, bottom, middle, top.
Flash cards
Say the answer out loud, then flip.
What are key points?
What is a cycle?
- One complete repeat of the wave
- its width is the period.
How far apart are neighboring key points?
A wave has period 12. What are its five key-point inputs?
List the key points of y = 9 sin(x).
- Period 2π ÷ = 6, so:
Should you join the key points with straight lines?
- No. Use a smooth, rounded curve
- straight lines make a zigzag.
Lesson 8 of 8
8. Read a wave and write its equation
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Imagine finding a label for a repeating wallpaper pattern. You measure how tall it is, how wide one repeat is, and where the pattern begins. Those three clues name a sine or cosine wave too. This lesson uses unshifted waves, meaning there is no extra angle added or subtracted inside the function. Their middle, called the midline, is y = 0. You also choose the inside multiplier ω to be positive. Within that family, the start at x = 0 tells you sine or cosine and its sign. The vertical height tells you the amplitude. One complete horizontal repeat tells you the period. You turn those observations into an equation.
Explain it like I am five
Picture describing ocean swells to a friend: their height, the distance between crests (tops), and what the water does as you start watching. A wave's equation needs the same three clues. Here the midline, the middle line, is y = 0, and ω (omega) is positive.
Example: a wave tops out at 7, bottoms out at −7, repeats every 12 units, and at x = 0 sits in the middle heading down. Height: the amplitude is half the top-to-bottom gap, = = 7. Start: sine rises from the middle; this one falls, so A = −7. Width: the period is T = 12, and one cycle needs ωT = 2π, so ω = = . The equation is y = −7 sin(x).
Check at a quarter period, x = 3: the inside is × 3 = , so y = −7 × 1 = −7, the bottom. The four starts, with a the amplitude: middle up is a sin, middle down is −a sin, top is a cos, bottom is −a cos.
2 Picture it
Reminder
Reminder: Midline and maximum/minimum, Subtract a negative, Amplitude and absolute value, Sine and cosine at zero, Quarter-turn values, Solve a one-step equation, Cancel common factors, Divide by a fraction, Period and cycle, Point plotting, Negative input identities, Range and intervals
- Midline and maximum/minimum. The middle is halfway between the extremes: for 8 and −8, = 0, so the midline is y = 0.
- Subtract a negative. Subtracting −8 adds 8: 8 − (−8) = 16.
- Amplitude and absolute value. If A = −8, amplitude |A| = 8. The sign records reflection.
- Sine and cosine at zero. sin 0 = 0 and cos 0 = 1, so −8 sin 0 = 0 while −8 cos 0 = −8.
- Quarter-turn values. sin() = 1 and cos π = −1. These locate the first sine peak and halfway cosine extreme.
- Solve a one-step equation. If 10ω = 2π, divide both sides by 10 to get ω = . Substitute back: 10 × = 2π.
- Cancel common factors. = because the common nonzero factor 2π cancels.
- Divide by a fraction.
- Period and cycle. For y = sin(2x), one complete cycle has width T = π because 2 × π = 2π.
- Point plotting. A column with input 5 and output 8 plots the point (5, 8), horizontally first.
- Negative input identities. sin(−2x) = −sin(2x) chooses a positive inside multiplier; cos(−2x) = cos(2x) needs no sign change.
- Range and intervals. An amplitude of 8 around zero gives −8 ≤ y ≤ 8, written [−8, 8].
3 Why
At zero, sine is zero and cosine is 1. With ω > 0, positive sine initially rises, and negative sine initially falls. Positive cosine starts at its maximum, while negative cosine starts at its minimum. These facts identify the function and sign for the restricted unshifted family. The vertical span contains two amplitudes. A full cycle makes the inside angle advance by 2π, so ωT = 2π. Solving that equation gives ω = . Together, these measurements rebuild the wave.
4 The rule
For nonconstant or , centered at with , amplitude and .
At : middle up chooses a sin; middle down chooses ; top chooses a cos; bottom chooses .
The same idea, five ways
start chooses the wave and sign, height chooses amplitude, width chooses omega.
For an unshifted sine or cosine wave centered at zero, its start, amplitude, and period determine an equation when ω is chosen positive.
- y = A sin(ωx) or y = A cos(ωx)
- A ≠ 0, ω > 0, midline y = 0
- a = |A| =
- Range: −a ≤ y ≤ a, or [−a, a]
Identify a repeating fabric by its starting motif, height, and width.
The same idea, other ways
Read three independent features. Vertical distance gives amplitude, horizontal repeat distance gives period, and the first point with its direction gives the signed sine or cosine start.
The graph is the cooked result. Its height tells you how much outside multiplier was used. Its cycle width tells you the inside multiplier. Its start tells you which base wave and reflection were used.
A wave reaches 1 and −1, repeats every 2π, and crosses zero going up. Its amplitude is = 1, its ω is = 1, and its equation is y = sin x. Substituting x = gives 1, matching its first peak.
Choosing ω > 0 fixes the direction of the input's travel. The start then fixes the family and sign. The extreme heights fix |A|. The full cycle fixes ω because ωT = 2π. No other coefficient remains to choose in y = A sin(ωx) or y = A cos(ωx).
| Start at x = 0, with ω > 0 | Equation family |
|---|---|
| Middle going up | y = a sin(ωx) |
| Middle going down | |
| Top | y = a cos(ωx) |
| Bottom |
Part 1: Middle going up: positive sine
You see the curve cross y = 0 at x = 0 and rise immediately to the right. In the unshifted family with ω > 0, this is the positive sine start. Imagine stepping onto a swing as it passes through the middle and heads upward. The graph's direction matters because both positive and negative sine equal zero at the start. Its first quarter-cycle height tells them apart.
- Rule: With A ≠ 0 and ω > 0, an unshifted zero-midline wave that starts at the middle going up has y = a sin(ωx), where a is its positive amplitude.
The same idea, five ways
middle and up means positive sine.
A positive sine curve starts at zero and first moves upward.
- y = a sin(ωx), a > 0, ω > 0
- f(0) = 0
Begin a ride at the middle while it is climbing.
Worked example
Middle going up gives positive sine
The pictured unshifted wave centered at y = 0 has a maximum of 3, a minimum of −3, a full cycle of 2π, and is at the middle going up at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Show the steps and the answer
- Confirm that the highest and lowest heights are 3 and . Their middle is .Their sum is zero, so = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
- Find the amplitude: .The distance from bottom to top contains two equal amplitudes.
- At the graph is at the middle going up. Choose positive sine, so .Sine begins at zero. The positive parent first rises, so a positive multiplier gives the observed direction.
- Read one complete repeat as . Find . Choose .A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
- Write .The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
- For a second check, split the period into quarters: . Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
- Amplitude = 3
- Period T = 2π
- ω = 1
- y = 3 sin x
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Check one quarter period after zero. A positive height confirms positive sine.
Part 2: Middle going down: negative sine
You see the curve cross y = 0 at x = 0 and fall immediately to the right. It starts at the same height as positive sine but travels in the opposite direction. Think of a swing passing through the middle on its way downward. With ω chosen positive, the negative outside multiplier creates that reflection. The amplitude still measures a positive distance from the middle to an extreme.
- Rule: With ω > 0, an unshifted zero-midline wave that starts at the middle going down has y = −a sin(ωx), where a > 0 is the amplitude.
The same idea, five ways
middle and down means negative sine.
A negative sine curve begins at zero and first moves below the middle.
- f(0) = 0
Begin a ride at the middle while it is descending.
Worked example
Middle going down gives negative sine
The pictured unshifted wave centered at y = 0 has a maximum of 5, a minimum of −5, a full cycle of 4π, and is at the middle going down at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Show the steps and the answer
- Confirm that the highest and lowest heights are 5 and . Their middle is .Their sum is zero, so = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
- Find the amplitude: .The distance from bottom to top contains two equal amplitudes.
- At the graph is at the middle going down. Choose negative sine, so .Sine begins at zero. The positive parent first rises, so a negative multiplier gives the observed direction.
- Read one complete repeat as . Find . Choose .A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
- Write .The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
- For a second check, split the period into quarters: . Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
- Amplitude = 5
- Period T = 4π
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write both amplitude and A. They have different jobs when the wave is reflected.
Part 3: Top: positive cosine
You see the curve at its highest point when x = 0. It then heads down toward the middle. Think of a ride beginning with its seat at the very top. In the unshifted family, cosine provides this start because cos 0 = 1. Multiplying by a positive amplitude places that first point at the top of the wave. The period changes how far you travel horizontally before returning to that same top.
- Rule: With ω > 0, an unshifted zero-midline wave that starts at the top has y = a cos(ωx), where a > 0 is its amplitude.
The same idea, five ways
top means positive cosine.
A positive cosine curve starts at its maximum height.
- y = a cos(ωx), a > 0, ω > 0
- f(0) = a
- f(T) = a
Begin a ride in its highest seat.
Worked example
A top start gives positive cosine
The pictured unshifted wave centered at y = 0 has a maximum of 4, a minimum of −4, a full cycle of 6π, and is at the top at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Show the steps and the answer
- Confirm that the highest and lowest heights are 4 and . Their middle is .Their sum is zero, so = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
- Find the amplitude: .The distance from bottom to top contains two equal amplitudes.
- At the graph is at the top. Choose positive cosine, so .Cosine at zero is 1, so A cos 0 = A. The start is the maximum, 4.
- Read one complete repeat as . Find . Choose .A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
- Write .The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
- For a second check, split the period into quarters: . Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
- Amplitude = 4
- Period T = 6π
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Measure between consecutive peaks. Skipping a peak counts more than one period.
Part 4: Bottom: negative cosine
You see the curve at its lowest point when x = 0. It then moves up toward the middle. Think of starting a ride in its lowest seat. Negative cosine supplies this start because cos 0 = 1 and a negative outside multiplier turns that output into a negative height. You still find the positive amplitude from half the total vertical span. Keep the negative sign only in A and in the equation.
- Rule: With ω > 0, an unshifted zero-midline wave that starts at the bottom has y = −a cos(ωx), where a > 0 is the amplitude.
The same idea, five ways
bottom means negative cosine.
A negative cosine curve begins at its minimum height.
Begin a ride in its lowest seat.
Worked example
A bottom start gives negative cosine
The pictured unshifted wave centered at y = 0 has a maximum of 7, a minimum of −7, a full cycle of 9, and is at the bottom at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Show the steps and the answer
- Confirm that the highest and lowest heights are 7 and . Their middle is .Their sum is zero, so = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
- Find the amplitude: .The distance from bottom to top contains two equal amplitudes.
- At the graph is at the bottom. Choose negative cosine, so .Cosine at zero is 1, so A cos 0 = A. The start is the minimum, −7.
- Read one complete repeat as . Find . Choose .A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
- Write .The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
- For a second check, split the period into quarters: . Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
- Amplitude = 7
- Period T = 9
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Substitute x = 0 first. Cosine returns A, and sine returns zero.
5 How
- Confirm that the midline is y = 0 and that the problem uses an unshifted sine or cosine wave. This is the family the four-start method identifies.
- Find the amplitude from half the vertical span. It is positive for a changing wave.
- At x = 0, choose sine or cosine and the sign of A from the starting height and direction. Set |A| equal to the amplitude.
- Measure the horizontal distance from one point to the next matching point with the same direction. That distance is T.
- Solve ωT = 2π by dividing both sides by T. Choose ω = > 0 and write the equation.
- Substitute the five quarter-period inputs into the equation. Compare all five outputs with the graph, and verify ωT = 2π.
Write an equation from a sine or cosine graph
- Confirm the family and y = 0 midline. Choose positive ω.
- Measure amplitude, read the starting position and direction, and choose signed A with sine or cosine.
- Measure one complete repeat T and calculate ω = .
- Write the equation and check all five quarter-period points.
6 Worked example
Worked example
Read a bottom-start graph with a plain-number period
The pictured unshifted wave centered at y = 0 has a maximum of 8, a minimum of −8, a full cycle of 10, and is at the bottom at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Show the steps and the answer
- Confirm that the highest and lowest heights are 8 and . Their middle is .Their sum is zero, so = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
- Find the amplitude: .The distance from bottom to top contains two equal amplitudes.
- At the graph is at the bottom. Choose negative cosine, so .Cosine at zero is 1, so A cos 0 = A. The start is the minimum, −8.
- Read one complete repeat as . Find . Choose .A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
- Write .The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
- For a second check, split the period into quarters: . Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
- Amplitude = 8
- Period T = 10
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
Read a taller middle-up graph
The pictured unshifted wave centered at y = 0 has a maximum of 3, a minimum of −3, a full cycle of 2π, and is at the middle going up at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Show the steps and the answer
- Confirm that the highest and lowest heights are 3 and . Their middle is .Their sum is zero, so = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
- Find the amplitude: .The distance from bottom to top contains two equal amplitudes.
- At the graph is at the middle going up. Choose positive sine, so .Sine begins at zero. The positive parent first rises, so a positive multiplier gives the observed direction.
- Read one complete repeat as . Find . Choose .A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
- Write .The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
- For a second check, split the period into quarters: . Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
- Amplitude = 3
- Period T = 2π
- ω = 1
- y = 3 sin x
Rung 2 of 5
Read a reflected wave with a long period
The pictured unshifted wave centered at y = 0 has a maximum of 5, a minimum of −5, a full cycle of 4π, and is at the middle going down at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Show the steps and the answer
- Confirm that the highest and lowest heights are 5 and . Their middle is .Their sum is zero, so = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
- Find the amplitude: .The distance from bottom to top contains two equal amplitudes.
- At the graph is at the middle going down. Choose negative sine, so .Sine begins at zero. The positive parent first rises, so a negative multiplier gives the observed direction.
- Read one complete repeat as . Find . Choose .A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
- Write .The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
- For a second check, split the period into quarters: . Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
- Amplitude = 5
- Period T = 4π
Rung 3 of 5
Bottom start and a plain-number period
The pictured unshifted wave centered at y = 0 has a maximum of 8, a minimum of −8, a full cycle of 10, and is at the bottom at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Show the steps and the answer
- Confirm that the highest and lowest heights are 8 and . Their middle is .Their sum is zero, so = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
- Find the amplitude: .The distance from bottom to top contains two equal amplitudes.
- At the graph is at the bottom. Choose negative cosine, so .Cosine at zero is 1, so A cos 0 = A. The start is the minimum, −8.
- Read one complete repeat as . Find . Choose .A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
- Write .The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
- For a second check, split the period into quarters: . Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
- Amplitude = 8
- Period T = 10
Rung 4 of 5
Bottom start and a fractional period
The pictured unshifted wave centered at y = 0 has a maximum of 4, a minimum of −4, a full cycle of , and is at the bottom at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.
Show the steps and the answer
- Confirm that the highest and lowest heights are 4 and . Their middle is .Their sum is zero, so = 0. This checks the zero-midline requirement. The question already specifies an unshifted wave.
- Find the amplitude: .The distance from bottom to top contains two equal amplitudes.
- At the graph is at the bottom. Choose negative cosine, so .Cosine at zero is 1, so A cos 0 = A. The start is the minimum, −4.
- Read one complete repeat as . Find . Choose .A full cycle advances the inside angle by 2π, so ωT = 2π and dividing both sides by T finds the inside multiplier.
- Write .The outside multiplier gives the correct heights and start; the inside multiplier gives the observed period.
- For a second check, split the period into quarters: . Use the five-column picture to compare the equation with the graph.Checking the start, both extremes, the middle crossings, and the end tests more than the starting height alone.
- Amplitude = 4
- Period T =
Rung 5 of 5
Measure the period from the picture
Use the labeled graph of an unshifted sine or cosine wave centered at y = 0. Read its highest and lowest heights, choose the function and its sign, measure one complete repeat, and write its equation with positive ω. In plain words, use the picture's labels to find the wave's height and width before choosing its rule.
Show the steps and the answer
- Read the height labels at the top and bottom points: the highest output is 11 and the lowest output is . Their middle is .A point's second coordinate is its output height. The average of the two extremes locates the midline and confirms that this wave is centered at y = 0.
- Find the full height gap: . Halve it: amplitude .Subtracting the bottom height from the top height measures both equal middle-to-extreme distances together. Amplitude measures only one of them.
- At , the graph is at its top. Choose positive cosine, with .Cosine at zero is 1, so 11 cos 0 = 11 gives the observed top. Sine would give output 0 at zero, which would miss the starting point.
- Read the horizontal labels of two consecutive tops: and . Subtract their input positions: . The picture also shows the previous top at . Using that pair gives , so subtracting the left input from the right input works even when the first top is not at zero.The period is the horizontal distance between consecutive matching positions in the wave. Top to next top includes both the descent to the bottom and the return to the top.
- Reject 7 as the period. The distance from the top at to the bottom at is , which is half of 14.The bottom has output −11, while the start has output 11. These positions have different heights, so they do not mark a complete repeat.
- Set to find the positive inside multiplier. Divide both sides by 14: . Substitute back: .The measured input distance 14 must advance the inside angle by one full turn. Division isolates the missing multiplier, and substitution checks that it gives the intended full turn.
- Write .Positive cosine supplies the top start, 11 supplies the amplitude, and supplies the measured cycle width.
- Build the check inputs from the measured period. One quarter is . Two quarters give . Three quarters give . Four quarters give .Four equal horizontal gaps span one complete cycle. Calculating the multiples gives the five input columns from the starting input 0 to the ending input 14.
- Substitute the five inputs into the inside angle. The products are , and .These products identify the circle angle reached at each graph input. They are the five quarter-turn angles whose cosine values are already known.
- Evaluate each output: , and . Compare them with the graph and the check table.Cosine reads the circle's horizontal coordinate. Multiplying its parent outputs by 11 gives the graph's observed top, middle, bottom, middle, and top.
- Amplitude = 11
- Period T = 14
- The top-to-bottom distance 7 is half a cycle.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Know cold: The graph input uses radians unless a degree sign is written. Memory cue: π is a half turn; 2π is a full turn.
- Know cold: Amplitude is |A|. Memory cue: amplitude is a distance, so drop the coefficient's direction sign.
- Know cold: T = for A ≠ 0 and ω ≠ 0. Memory cue: faster inside, shorter outside distance.
- Know cold: With A > 0 and ω > 0, sine starts at the center rising and cosine starts at the crest. Memory cue: sine at center, cosine at crest.
- Know cold: Sine is odd with origin symmetry; cosine is even with y-axis symmetry. Memory cue: odd changes both point signs; even keeps equal heights at opposite inputs.
- Memory cue: center means sine, crest means cosine. Then choose the sign from the first direction or extreme.
- Amplitude is the positive height measure. Write signed A on a separate line.
- Plain-number periods still produce radian inside angles. If T = 10, ω = , because × 10 = 2π.
- Rebuild the equation from three graph measurements rather than memorize individual worksheet curves.
- Cheat sheet tip: Keep the four-start rule, a = , ω = , and a note that the shortcut uses unshifted y = 0 waves.
- Understand, then rebuild it when needed: Rebuild exact sine values from the circle and the two special triangles. Rebuild the five key points by dividing T into four gaps. Rebuild amplitude from half the vertical span. Rebuild ω from ωT = 2π. Rebuild a cofunction argument by subtracting from one quarter turn. Do not memorize individual transformed graphs or long value tables; each can be reconstructed from these ideas.
- Put on the cheat sheet: Keep the amplitude, period, range and inverse-period formulas, the four starts, the five-point pattern pictures, and the six cofunction identities. Look these up while studying; practice rebuilding them for a closed-book exam.
- One-page cheat sheet: For y = A sin(ωx) or y = A cos(ωx), A ≠ 0 and ω ≠ 0.
Amplitude = |A| = .
Domain = (−∞, ∞); range = [−|A|, |A|]; midline y = 0.
T = , quarter period = , |ω| = .
Choose ω > 0 when reading a graph. At x = 0: center rising means positive sine; center falling means negative sine; top means positive cosine; bottom means negative cosine.
Use the sine and cosine key-point table pictures, not a memorized set of transformed curves.
Sine: sin(−x) = −sin x. Cosine: cos(−x) = cos x.
Both repeat after a full inside turn of 2π.
sin x = cos( − x); cos x = sin( − x).
tan x = cot( − x); cot x = tan( − x).
sec x = csc( − x); csc x = sec( − x).
Use 90° in place of for degree arguments; values must be defined.
cos x = sin(x + ): cosine is sine shifted left.
This four-start graph method uses an unshifted wave with midline y = 0.
7 The trap
The four-start method assumes an unshifted wave centered at y = 0 and a positive ω. A wave with another midline or an arbitrary horizontal shift needs the later transformation method.
Keep in mind
- The amplitude is half the gap, not the whole gap: from −7 to 7 the gap is 14 and the amplitude is 7.
- Measure the period between two points that match in height and direction, such as top to next top, because top to bottom is only half a period.
- ω comes from the period through ω = , never the period itself: a period of 30 gives ω = = , not 30.
- The four starts work only for waves centered on y = 0 with no sideways shift; a shifted wave needs the transformation method of 5-6.
Memory hook
Look at x = 0: middle going up is sin, middle going down is −sin, top is cos, bottom is −cos.
Flash cards
Say the answer out loud, then flip.
What is the midline of a wave?
- The level line halfway between its top and bottom
- here y = 0.