Quarry School

College Algebra / Power functions and polynomial functions

Power functions and polynomial functions

Subject: Mathematics

All 6 lessons, in order.

The unit at a glance

  1. Power functions

    The big picture. Learn to recognize and graph a power function, f(x) = kxp.

  2. End behavior of a power function

    The big picture. Predict both ends of a power function f(x) = kxp when p is a positive whole number.

  3. Polynomial vocabulary

    The big picture. Learn to identify a polynomial and name its parts.

  4. End behavior of a polynomial comes from its leading term

    The big picture. Predict a polynomial’s far-left and far-right directions without drawing the whole graph.

  5. Intercepts of a polynomial

    The big picture. Find where a polynomial graph meets each axis.

  6. Turning points

    The big picture. Use a graph’s changes of direction to put a lower bound on its degree.

Rules (6)
  • Power functions

    A power function is f(x) = kxp, where k is a fixed number other than 0 and p is a fixed number. The graph families below use whole-number powers p (0, 1, 2, 3, ...). Polynomial vocabulary later compares these with negative and fractional powers.
    For a whole-number p: if p is even, f(−x) = f(x): the inputs x and −x give the same output, and the graph mirrors across the y-axis. If p is odd, f(−x) = −f(x): x and −x give opposite outputs, and the graph looks the same after a half turn around (0, 0).

  • End behavior of a power function

    For f(x) = kxp with p = 1, 2, 3, ... and k ≠ 0:
    Right arm: k > 0 gives f(x) → ∞ as x → ∞; k < 0 gives f(x) → −∞ as x → ∞.
    Left arm: if p is even it matches the right arm; if p is odd it points the opposite way.

  • Polynomial vocabulary

    A polynomial is a sum of terms a·xn: each coefficient a is a real number and each power n is a whole number (0, 1, 2, 3, ...). Standard form lists the powers from highest to lowest: f(x) = anxn + ... + a2x2 + a1x + a0, with an ≠ 0; every polynomial except 0 itself can be written this way. The degree is n, the highest power. The leading term is anxn. The leading coefficient is an. The constant term is a0. The zero polynomial, 0, has no degree and no leading term.

  • End behavior of a polynomial comes from its leading term

    If f(x) = anxn + (terms with lower powers of x), where an ≠ 0 is the leading coefficient and the degree n is 1 or more, then f has the same end behavior as the power function y = anxn.
    n even, an > 0: as x → −∞, f(x) → ∞, and as x → ∞, f(x) → ∞ (both arms up).
    n even, an < 0: as x → −∞, f(x) → −∞, and as x → ∞, f(x) → −∞ (both arms down).
    n odd, an > 0: as x → −∞, f(x) → −∞, and as x → ∞, f(x) → ∞ (left arm down, right arm up).
    n odd, an < 0: as x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞ (left arm up, right arm down).

  • Intercepts of a polynomial

    y-intercept: the point (0, f(0)). When the polynomial is written term by term, f(0) is the constant term, the term with no x. x-intercepts: the points (c, 0) for every real number c with f(c) = 0. Zero product property: if A · B = 0, then A = 0 or B = 0.

  • Turning points

    A turning point is a point where the graph changes from rising to falling (a peak) or from falling to rising (a valley), read left to right.
    A polynomial of degree n, where n is 1 or more, has at most n − 1 turning points.
    Backward: a polynomial that is not constant and whose graph has t turning points has degree at least t + 1.

Recipes (6)
  • Power functions
    1. For f(x) = 2x3, match the power-function form f(x) = kxp: k = 2 is the number in front and p = 3 is the power. The 2 multiplies x3; it is not part of the power.
    2. Use the odd-power rule: p = 3 is odd, so opposite inputs give opposite outputs. Start from the shape of y = x3, because cubing a negative input keeps its minus sign.
    3. Use substitution and the order of operations to make the table. Cube each input before multiplying by 2: f(−2) = 2(−8) = −16, f(−1) = 2(−1) = −2, f(0) = 0, f(1) = 2 and f(2) = 16.
    4. Plot (−2, −16), (−1, −2), (0, 0), (1, 2) and (2, 16) and join them smoothly in the shape of y = x3. Each output is 2 times the output of x3 at the same input, so the graph is y = x3 stretched to twice the height.
    5. Check with the odd-power rule: the outputs at −2 and 2 are −16 and 16, and those at −1 and 1 are −2 and 2. Each pair is opposite. Also f(1) = 2 equals k, because 1 to any power is 1.
  • End behavior of a power function
    1. For f(x) = −2x5, match f(x) = kxp: k = −2 and p = 5. The end-behavior rule applies because p is a positive whole number and k is not 0.
    2. Apply the right-arm rule first. k = −2 is negative, so as x → ∞, f(x) → −∞. The reason: a large positive input has a large positive fifth power, and multiplying by −2 makes it negative.
    3. Apply the left-arm rule. p = 5 is odd, so the left arm points the opposite way from the right arm: as x → −∞, f(x) → ∞. The reason: a large negative input has a large negative fifth power, and multiplying by −2 makes it positive.
    4. Write the answer in arrow notation, one line for each direction of x. In arrow notation, x → ∞ means the input moves far to the right without stopping, and f(x) → −∞ means the outputs drop without stopping. So: as x → −∞, f(x) → ∞ (left arm up), and as x → ∞, f(x) → −∞ (right arm down).
    5. Check by substitution: f(10) = −2 · 100,000 = −200,000 and f(−10) = −2 · (−100,000) = 200,000. Their signs agree with the two end rules. These values check the arithmetic; the rules describe what happens as inputs grow without bound.
  • Polynomial vocabulary
    1. For g(x) = 4x2 − 9 + 3x5 − x, apply the polynomial definition. The powers of x are 2, 0, 5 and 1, all whole numbers, and each coefficient is real, so g is a polynomial. No brackets need multiplying out, and no two terms share a power of x, so nothing needs combining.
    2. Use the term and coefficient definitions. Keep each minus sign with its term: 4x2, −9, 3x5, −x have coefficients 4, −9, 3, −1. The term −x means −1 times x, and the constant −9 has power 0.
    3. Use the degree rule to choose the highest power with a nonzero coefficient: 5. Its term 3x5 is the leading term, and 3 is the leading coefficient. Position in the written formula does not determine the degree.
    4. Use standard form to reorder the terms from highest power to lowest: g(x) = 3x5 + 4x2 − x − 9. Addition allows this rearrangement when each term keeps its sign.
    5. Check the rearrangement term by term: the same four signed terms occur once each. Then substitute x = 2 into both orders: 4(2)2 − 9 + 3(2)5 − 2 = 16 − 9 + 96 − 2 = 101 and 3(2)5 + 4(2)2 − 2 − 9 = 96 + 16 − 2 − 9 = 101. Matching outputs support the check; keeping every signed term is what makes the two forms equal.
  • End behavior of a polynomial comes from its leading term
    1. For f(x) = 50x2 − x3 + 100, use the degree rule to find the highest power, 3. The leading term is −x3 and its coefficient is −1, even though it is written in the middle.
    2. Apply the leading-term rule for end behavior. Use −x3 to predict the two ends, because the lower-power terms become small compared with it far enough from zero. Keep those terms when calculating actual outputs.
    3. Apply the power-function rules to −x3. The negative coefficient sends the right end down: as x → ∞, f(x) → −∞. The odd degree makes the left end opposite: as x → −∞, f(x) → ∞.
    4. Check by substituting into the whole polynomial: f(100) = 500,000 − 1,000,000 + 100 = −499,900, and f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100. The signs match the predicted ends. Here the leading term outweighs the other terms together; f(10) = 4,100 shows why a small input can mislead.
  • Intercepts of a polynomial
    1. For f(x) = 2x2 − 4x − 30, use the y-intercept rule: set x = 0 because every point on the y-axis has that input. f(0) = −30, so the y-intercept is (0, −30).
    2. Use the x-intercept rule: set the output to zero because every point on the x-axis has height zero. Solve 2x2 − 4x − 30 = 0. Pull out the common factor 2 to get 2(x2 − 2x − 15) = 0; distributing 2 gives back all three terms.
    3. Factor x2 − 2x − 15: look for two numbers whose product is −15, the number with no x, and whose sum is −2, the number in front of x. They are 3 and −5, so x2 − 2x − 15 = (x + 3)(x − 5). Multiplying out checks it: x2 − 5x + 3x − 15 = x2 − 2x − 15.
    4. Apply the zero product property to 2(x + 3)(x − 5) = 0. The factor 2 cannot be zero, so solve x + 3 = 0 or x − 5 = 0. This gives x = −3 or x = 5. Use the x-intercept rule to write (−3, 0) and (5, 0).
    5. Check each input in the original formula: f(−3) = 18 + 12 − 30 = 0 and f(5) = 50 − 20 − 30 = 0. Both points have the required height zero. Check the y-intercept with the factored form too: 2(0 + 3)(0 − 5) = −30.
  • Turning points
    1. Use the turning-point definition on the graph described in the example. Read left to right: falling changes to rising at (−2, −13), rising changes to falling at (0, 3), and falling changes to rising at (2, −13). Count these direction changes, not the ends or a flat spot that keeps rising.
    2. Count t = 3 turns. Apply the bound t ≤ n − 1: 3 ≤ n − 1 gives n ≥ 4 after adding 1 to both sides. This is a lower bound, because a degree can allow more turns than a graph actually has.
    3. Use the end-behavior rule from the earlier lesson. Both ends point up, so the degree is even and the leading coefficient is positive. The smallest even degree allowed by the turn count is 4.
    4. Check that degree 4 can fit the stated shape with the example’s formula f(x) = x4 − 8x2 + 3. Its degree is 4 and its leading coefficient 1 is positive, so it allows at most 3 turns and both arms point up. Multiplying out (x2 − 4)2 − 13 gives x4 − 8x2 + 16 − 13 = x4 − 8x2 + 3, so f(x) = (x2 − 4)2 − 13. A square is never negative and is 0 only where x2 − 4 = 0, at x = −2 and x = 2, so the lowest outputs are −13 there. Between them, x2 − 4 runs from 0 down to −4 at x = 0 and back to 0, so its square climbs from 0 to 16 and falls back: the graph rises to (0, 3) and falls again. Outside −2 and 2 the square only grows, so both arms rise.
    5. Finish the check by substitution: f(−2) = 16 − 32 + 3 = −13, f(0) = 3 and f(2) = 16 − 32 + 3 = −13. This degree-4 polynomial has the three stated turns and both arms up, so degree 4 is possible as well as being the lower bound.
Traps (6)
  • Power functions

    Letting the power grab the number in front. In f(x) = −3x2 the power 2 belongs to x alone. At x = 2, square first, 22 = 4, then multiply by −3 to get −12. Squaring −3 · 2 = −6 gives 36, which is the output of a different function, (−3x)2. Put the input in, do the power, and only then multiply by k.

  • End behavior of a power function

    Reading −x4 as (−x)4. The power touches only x. The minus sign in front is k = −1 and is applied last. So −x4 has both arms down, while (−x)4 = x4 has both arms up. Before deciding anything, write k out with its sign: k = −1, k = −2, and so on.

  • Polynomial vocabulary

    The most common mistake is to take the first term on the page as the leading term, or to take the biggest number as the leading coefficient. In 5 + 2x − 3x4 the leading term is −3x4, not 5, and the leading coefficient is −3, sign included. Always find the highest power first. The order on the page and the size of the numbers decide nothing.

  • End behavior of a polynomial comes from its leading term

    Taking the first term on the page as the leading term. In f(x) = 6 + 2x − x4 the first term is 6, but the leading term is −x4, the one with the highest power. Before reading any sign, scan every term for its power of x and circle the highest one. Then read the sign directly in front of that term, including a bare minus sign, which means −1.

  • Intercepts of a polynomial

    The most common mistake is reading the number inside a bracket with its sign unchanged. The factor (x + 3) does not give an intercept at 3. It gives −3, because −3 is the value that makes x + 3 equal 0. To avoid it, write the small equation x + 3 = 0 every time, solve it, and plug the answer back in. If the output is not 0, the sign is wrong.

  • Turning points

    Reading 'at most' as 'exactly'. A degree 3 polynomial does not have to have 2 turning points: y = x3 has none. A graph with 3 turning points does not have to come from degree 4: it could come from degree 6. Going from a formula of degree 1 or more, say 'at most n − 1 turning points'. Going from a graph that is not a flat line, say 'degree at least t + 1'.

Lesson 1 of 6

Power functions

Subject: MathematicsLeans on: A power is repeated multiplicationLeans on: Signs when multiplying and dividingLeans on: Order of operationsLeans on: Multiplying in any orderLeans on: Multiplying fractionsLeans on: Dividing is multiplying by a fractionOpen this lesson
Leans on 0Comes back in 0

1 In plain words

The big picture. Learn to recognize and graph a power function, f(x) = kxp. The power p sets the basic shape, and the number in front, k, multiplies every height. This builds on evaluating functions and prepares you to predict where these graphs go at each end.

Picture a square floor tile. If each side is x feet long, the tile covers x · x = x2 square feet. Double the sides and it covers four times as much floor. A cube-shaped box works the same way: it holds x · x · x = x3 cubic feet, so doubling the sides makes it hold eight times as much. A power function has the form f(x) = kxp, with fixed numbers k and p. When p is a positive whole number, it multiplies p copies of x and then multiplies by k. The power p sets the basic shape. With no number in front, even powers from 2 up, such as x2, bend into a U (the power 0 gives the flat line y = 1), and odd powers such as x3 climb from the lower left, through (0, 0), to the upper right.

2 Picture it

(−1, 1)(−1, −1)(0, 0)(1, 1)−22−4−224(−1, 1)(−1, −1)(0, 0)(1, 1)−2−112−4−224
The solid U is y = x2, an even power, and the dashed curve is y = x3, an odd power.

Reminder

Reminder: A power is repeated multiplication, Signs when multiplying and dividing, Order of operations, Multiplying in any order, Multiplying fractions, Dividing is multiplying by a fraction
  • A power is repeated multiplication. xp means p copies of x multiplied together: 2⁴ = 2 · 2 · 2 · 2 = 16.
  • Signs when multiplying and dividing. Negative times negative is positive, negative times positive is negative, and dividing follows the same rules: (−3)(−3) = 9, 9 · (−3) = −27 and −8 ÷ 4 = −2.
  • Order of operations. A power acts before a multiplication and before a minus sign in front: −2⁴ = −(2⁴) = −16, but (−2)⁴ = 16 because the parentheses put the minus sign inside.
  • Multiplying in any order. A product can be regrouped: 2x · 2x = (2 · 2)(x · x) = 4x2.
  • Multiplying fractions. Multiply the tops and multiply the bottoms: 12 · 12 = 14, so (12)⁴ = 116.
  • Dividing is multiplying by a fraction. Dividing by 5 is the same as multiplying by 15: 15 · 10 = 105 = 2, and 10 ÷ 5 = 2.

3 Why

The two shapes differ because of one sign rule: a negative times a negative is positive. Raise −2 to a power and the minus signs pair off and cancel. With an even power every minus sign has a partner, so (−2)⁴ = 16, the same as 2⁴. A negative input lands at the same height as its positive twin, so the left side is a mirror copy of the right. With an odd power one minus sign is left over, so (−2)3 = −8, the opposite of 23 = 8. The left side is that mirror copy flipped upside down, so the curve comes up from below.

4 The rule

A power function is f(x) = kxp, where k is a fixed number other than 0 and p is a fixed number.source 1

The graph families below use whole-number powers p (0, 1, 2, 3, ...). Polynomial vocabulary later compares these with negative and fractional powers.
For a whole-number p: if p is even, f(−x)=f(x): the inputs x and −x give the same output, and the graph mirrors across the y-axis. If p is odd, f(−x)=−f(x): x and −x give opposite outputs, and the graph looks the same after a half turn around (0, 0).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

The same idea, five ways

Say it

Say it as: f of x equals k times x to the p. A fixed number multiplies x raised to a fixed power.

Write it

When the power p is a whole number, a power function multiplies p copies of the input together, then multiplies the result by one fixed number k.

In math
  • f(x) = kxp
  • y = kxp
  • k ≠ 0; in this unit p is one of 0, 1, 2, 3, ... (p can also be negative or a fraction, as in x−1 = 1x)
  • power functions: 3x2, −x⁵, 12x3
  • not power functions: x2 + 1, 2x
  • graph words: passes through (1, k), and through (0, 0) when p ≥ 1
Like

A pizza's area is a power function of its radius: A = πr2, with k = π and p = 2. Double the radius and you get four times as much pizza.

See it
3f(x) = 2x²: squarethe input, thenmultiply by 2inputoutput18
The power function f(x) = 2x2 works like a machine: 3 goes in, 32 = 9, and 2 · 9 = 18 comes out.

The same idea, other ways

As a picture: fold and spin

On the graph of y = x3, every point on the right has a partner on the left: (2, 8) goes with (−2, −8), and (1, 1) goes with (−1, −1). Each pair sits the same distance from (0, 0) in exactly opposite directions, so spinning the picture half a turn around (0, 0) lands the curve on itself. An even power pairs its points differently: on y = x2 the partner of (2, 4) is (−2, 4), straight across the y-axis, so folding the picture along the y-axis lands one half on the other.

(−2, −8)(−1, −1)(1, 1)(2, 8)−22−8−448
Each point on y = x3 has a partner the same distance from (0, 0) in the opposite direction.
As a story: the about-face

Start at 1 on a number line. Multiplying by −2 doubles your distance from 0 and does an about-face that sends you to the other side of 0. Do it four times and you visit −2, 4, −8 and 16. Four about-faces put you back on the positive side, so (−2)⁴ = 16; three leave you on the negative side, so (−2)3 = −8. Any even number of about-faces ends on the positive side, and any odd number ends on the negative side.

00181 < 8: 8 is further right−1−8times −1: −1 > −8, the order reversed
Multiplying by −1 is an about-face across 0.
With small numbers

The table shows y = x3 at five inputs. Look at the highlighted columns under −2 and 2: the outputs are −8 and 8, opposites. The columns under −1 and 1 hold −1 and 1, opposites again, and the column under 0 holds 0. Every pair of opposite inputs gives opposite outputs: that is the half-turn rule of an odd power. For the even power x2, the inputs −2 and 2 would both give 4.

input xoutput x³−2−8−1−1001128↓ evaluate: input given, read the output below it
The highlighted columns under −2 and 2 hold −8 and 8: opposite inputs, opposite outputs.
Why it must be true

Write (−2)p as p copies of −2 multiplied together and pair the copies off from the left. Each pair (−2)(−2) is 4, a positive number. If p is even, every copy has a partner, so the answer is positive and equals 2p. If p is odd, one −2 is left over after the pairs, so the answer is negative and equals −(2p). Nothing here depends on the 2, so for any number x, the inputs x and −x give the same output under an even power and opposite outputs under an odd power.

(−2)¹=−2

(−2)2=4

(−2)3=−8

(−2)⁴=16

(−2)⁵=−32

As a rule of thumb

Even evens out; odd leaves one out. For a power p = 1, 2, 3, ...: an even power evens out the minus signs, so its graph looks like x2, a U. An odd power leaves one minus sign out of the pairs, so its graph runs low on the left and high on the right, like x3 (and like the line y = x when p = 1). To sort a whole-number power you have not met before, put in x = −1: (−1)p is 1 for an even p and −1 for an odd p.

Even (2, 4, ...) evens out: looks like x2

Odd (1, 3, ...) leaves one out: low left, high right

(−1)p = 1 means p is even

(−1)p = −1 means p is odd

With k = 1Even p: 2, 4, 6, ...Odd p: 1, 3, 5, ...
Simplest membery=x2y = x, a straight line, then y = x3
Checkpoints(−1,1),(0,0),(1,1)(−1,−1),(0,0),(1,1)
A negative input givesa positive output: (−2)2 = 4a negative output: (−2)3 = −8
x and −x givethe same outputopposite outputs
Picture rulemirror across the y-axishalf turn around (0, 0)
Rangey ≥ 0, written [0, ∞)every real number, (−∞, ∞)
Shapea U resting on (0, 0)low on the left, high on the right, flattening at (0, 0) once p ≥ 3

Part 1: Even powers: x2, x⁴, x⁶, ...

An even power is made of copies of x that come in pairs: x2 is one pair, x⁴ is two pairs, x⁶ is three. Think of dancers who always arrive in couples. When the input is negative, every minus sign has a partner, the partners cancel, and the output comes out positive. So −3 and 3 land at the same height, and the left half of the graph is a mirror image of the right half, like the two wings of a butterfly. Every even power from x2 on bends into a U resting on (0, 0). The bigger the power, the flatter the bottom of the U and the steeper its sides.

  • Formula: f(x) = xp with p = 2, 4, 6, ...
  • Checkpoints: (−1, 1), (0, 0) and (1, 1)
  • Domain: every real number, (−∞, ∞)
  • Range: y ≥ 0, written [0, ∞); the lowest point is (0, 0)
  • Mirror rule: x and −x give the same output, for example (−2)2 = 4 = 22
  • Bigger p: for x between −1 and 1, other than 0, the graph sits closer to the x-axis; at x = −1, 0 and 1 the graphs meet; beyond −1 and 1 it sits farther away. (12)2 = 14 but (12)⁴ = 116; 22 = 4 but 2⁴ = 16
(−1, 1)(0, 0)(1, 1)y = x⁴−221234
The curve is y = x2 and the dots are points of y = x⁴.

Worked example

The same height on both sides

For f(x) = x⁴, find f(−3) and f(3). (The inputs are −3 and 3; find each output.)

Show the steps and the answer
  1. f(−3)=(−3)4=(−3)(−3)(−3)(−3).The input −3 goes in place of x inside parentheses, and the power 4 means four copies of −3 multiplied together.
  2. Pair them: (−3)(−3)=9 and (−3)(−3)=9.A negative times a negative is positive, and 3 · 3 = 9.
  3. 9·9=81, so f(−3)=81.Both pairs came out positive, so no minus sign is left.
  4. f(3)=34=3·3·3·3=81.Four copies of 3, multiplied step by step: 3 · 3 = 9, 9 · 3 = 27, 27 · 3 = 81.
Answer
  • f(−3)=81
  • f(3) = 81
Double-check Second way: split the four 3s into two pairs, 3⁴ = (3 · 3)(3 · 3) = 9 · 9 = 81. The mirror rule says an even power gives −3 and 3 the same output, and it does.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Thinking x⁴ draws the same curve as x2, because both make a U.
They meet only at x = −1, 0 and 1. At x = 2, x2 = 4 but x⁴ = 16; at x = 12, x2 = 14 but x⁴ = 116.
✓ Instead: Same family and the same three checkpoints, but x⁴ hugs the x-axis longer and then climbs faster.
Tips and tricks
  • Memory device: even evens out. In an even power the minus signs pair off, so a negative input lands at the same height as its positive twin.

Part 2: Odd powers: x, x3, x⁵, ...

An odd power always has one copy of x left over after the pairs: x3 is one pair and one extra, x⁵ is two pairs and one extra. Think of friends lining up two by two: with an odd number, someone stands alone. That lone minus sign survives, so a negative input gives a negative output, and −2 and 2 land at opposite heights; for x3 those heights are −8 and 8. The graph runs low on the left, passes through (0, 0), and runs high on the right. Spin the picture half a turn around (0, 0) and it lands on itself. The power 1 gives a straight line; from x3 on, the curve flattens as it crosses (0, 0).

  • Formula: f(x) = xp with p = 1, 3, 5, ...
  • Checkpoints: (−1, −1), (0, 0) and (1, 1)
  • Domain: every real number, (−∞, ∞)
  • Range: every real number, (−∞, ∞)
  • Half-turn rule: x and −x give opposite outputs, for example (−2)3 = −8 and 23 = 8
  • Shape: p = 1 is the straight line y = x; from p = 3 on, the curve flattens as it crosses (0, 0)
  • Bigger p: for x between −1 and 1, other than 0, the graph sits closer to the x-axis; at x = −1, 0 and 1 the graphs meet; beyond −1 and 1 it sits farther away. (12)3 = 18 but (12)⁵ = 132; 23 = 8 but 2⁵ = 32
(−1, −1)(0, 0)(1, 1)−22−4−224
The solid curve is y = x3 and the dashed line is y = x.

Worked example

Opposite heights on the two sides

For f(x) = x3, find f(−3) and f(3). (The inputs are −3 and 3; find each output.)

Show the steps and the answer
  1. f(3)=33=3·3·3=27.Three copies of 3: 3 · 3 = 9, then 9 · 3 = 27.
  2. f(−3)=(−3)3=(−3)(−3)(−3).The input −3 goes in place of x inside parentheses, so all three copies carry the minus sign.
  3. (−3)(−3)=9, then 9·(−3)=−27, so f(−3)=−27.The first pair cancels to a positive 9; the third minus sign has no partner, and a positive times a negative is negative.
Answer
  • f(3) = 27
  • f(−3)=−27
Double-check Second way: an odd power keeps one minus sign, so (−3)3 = −(33) = −27, the opposite of f(3) = 27, as the half-turn rule says.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Expecting every odd power to bend like x3.
1 is odd too, and x¹ = x draws the straight line y = x, with no flat spot at (0, 0).
✓ Instead: All odd powers share the half-turn rule and the checkpoints (−1, −1), (0, 0) and (1, 1); the flattening at (0, 0) starts at p = 3.
Tips and tricks
  • Memory device: odd leaves one out. After the minus signs pair off, one is left over, so a negative input gives a negative output.
  • Quick test: an odd power sends −1 to −1, an even power sends −1 to 1.

5 How

  1. For f(x) = 2x3, match the power-function form f(x) = kxp: k = 2 is the number in front and p = 3 is the power. The 2 multiplies x3; it is not part of the power.
  2. Use the odd-power rule: p = 3 is odd, so opposite inputs give opposite outputs. Start from the shape of y = x3, because cubing a negative input keeps its minus sign.
  3. Use substitution and the order of operations to make the table. Cube each input before multiplying by 2: f(−2) = 2(−8) = −16, f(−1) = 2(−1) = −2, f(0) = 0, f(1) = 2 and f(2) = 16.
  4. Plot (−2, −16), (−1, −2), (0, 0), (1, 2) and (2, 16) and join them smoothly in the shape of y = x3. Each output is 2 times the output of x3 at the same input, so the graph is y = x3 stretched to twice the height.
  5. Check with the odd-power rule: the outputs at −2 and 2 are −16 and 16, and those at −1 and 1 are −2 and 2. Each pair is opposite. Also f(1) = 2 equals k, because 1 to any power is 1.

Is it one of the whole-number power functions drawn here?

1
After tidying, does a plus or minus sign join two pieces, as in x3 + 1?
YesNot a power function: a power function is a single piece.
NoGo on. A minus sign in front of one piece, as in −x⁴, is part of k.
↓
2
Is x up in the exponent, as in 2x?
YesNot a power function: x must be the base and the power a fixed number.
NoGo on.
↓
3
Is x in a bottom, as in 3x2, or under a root, as in x?
YesNot one of this unit's power functions: here the formula must be a number times a whole number of copies of x multiplied together.
NoIf what is left is k times xp, with k not 0 and p a whole number, it is one of this unit's power functions: read k and p, then go on.
↓
4
Is p even?
YesThe x2 family: x and −x give the same output; the graph is a U when p ≥ 2 and a flat line when p = 0.
NoThe x3 family: x and −x give opposite outputs; the graph is a straight line when p = 1.
  1. Tidy the formula: multiply out parentheses, (2x)3 = 8x3; combine copies of x, 3x2 · x3 = 3x⁵; and write dividing by a number as multiplying by a fraction, x35 = 15x3. Tidy only in ways that keep the function defined for every real x.
  2. Check that it is a single piece: no plus or minus sign joins two pieces.
  3. For the whole-number graph families here, x must be the base of a fixed whole-number power. A negative or fractional power can be a power function too; its graph needs a different rule.
  4. Read k, the number in front, and p, the power on x.
  5. Sort by p: an even p means the x2 family and an odd p the x3 family, with p = 1 giving a straight line and p = 0 a flat line.
  6. Check k by putting in x = 1: the output must be k.

6 Worked example

Worked example

Reading and plotting f(x) = 2x3

For f(x) = 2x3, name k and p, say whether p is even or odd, find f(−2), f(−1), f(0), f(1) and f(2), and describe the graph. (Each f(number) asks: the input is that number; find the output.)

input xoutput f(x)−2−16−1−20012216
x:−2,−1,0,1,2;f(x):−16,−2,0,2,16.
Show the steps and the answer
input xoutput f(x)−2−16−1−20012216
The columns under 2 and −2 hold 16 and −16: opposite inputs give opposite outputs, as an odd power must.
(−2, −16)(−1, −2)(0, 0)(1, 2)(2, 16)−22−16−8816
The solid curve y = 2x3 runs through the five table points.
  1. k=2 and p=3.2x3 is one fixed number, 2, times x raised to the fixed whole-number power 3, with nothing added, so it is a power function of the form kxp.
  2. p=3 is odd, so expect the x3 family: opposite inputs give opposite outputs.3 is one pair and one left over, and the lone minus sign survives.
  3. f(2)=2·23=2·8=16.The input 2 goes in place of x; the power comes first, 2 · 2 · 2 = 8, then multiply by k = 2.
  4. f(1)=2·13=2·1=2.Every power of 1 is 1, so the output at 1 is k itself.
  5. f(0)=2·03=0.Any number of zeros multiplied together is 0, and 2 · 0 = 0.
  6. f(−1)=2·(−1)3=2·(−1)=−2.(−1)(−1) = 1 and 1 · (−1) = −1: three minus signs leave one over.
  7. f(−2)=2·(−2)3=2·(−8)=−16.(−2)(−2) = 4 and 4 · (−2) = −8; then a positive times a negative is negative.
  8. Write each output under its input in the table, and plot each column as a point: (−2,−16),(−1,−2), (0, 0), (1, 2), (2, 16).Each column of the table is one point: the input says how far across, the output how far up or down.
  9. Describe the graph: the shape of y=x3 with every height doubled, low on the left, flattening as it crosses (0, 0), high on the right.An odd p puts the curve in the x3 family, and k = 2 multiplies each output of x3 by 2: 8 becomes 16 and 1 becomes 2.
Answer
  • k = 2 and p = 3, an odd power
  • f(−2)=−16
  • f(−1)=−2
  • f(0) = 0
  • f(1) = 2
  • f(2) = 16
  • The graph: the shape of y = x3, stretched to twice the height
Double-check Second way, by the half-turn rule for odd powers: opposite inputs must give opposite outputs. In the table the columns under 2 and −2 hold 16 and −16, and the columns under 1 and −1 hold 2 and −2. Also 2x3 = x3 + x3, and at x = 2 that is 8 + 8 = 16, as found.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

Nothing written in front (almost trivial)

For f(x) = x⁵, find k and p, say whether p is even or odd, and find f(2). (Find k and p means: read the number in front and the power. f(2) asks: the input is 2; find the output.)

Show the steps and the answer
  1. k=1.No number is written in front, and x⁵ = 1 · x⁵, since multiplying by 1 changes nothing.
  2. p=5, which is odd.5 is two pairs and one left over.
  3. f(2)=25=2·2·2·2·2=32.The input 2 goes in place of x, and five copies of 2 multiply out step by step: 4, 8, 16, 32.
Answer
  • k = 1
  • p = 5, odd
  • f(2) = 32
Double-check Group the five 2s another way: (2 · 2)(2 · 2) · 2 = 4 · 4 · 2 = 32. And f(1) = 1⁵ = 1, which matches k = 1.

Rung 2 of 7

A negative number in front

For g(x) = −4x2, find k and p, say whether p is even or odd, and find g(3). (g(3) asks: the input is 3; find the output.)

Show the steps and the answer
  1. k=−4.The number multiplying x2 is −4, and its minus sign belongs to it.
  2. p=2, which is even.2 is one pair.
  3. 32=9.The power comes first: 3 · 3 = 9.
  4. g(3)=−4·9=−36.Then multiply by k: 4 · 9 = 36, and a negative times a positive is negative.
Answer
  • k=−4
  • p = 2, even
  • g(3)=−36
Double-check Multiply −4 · 3 · 3 in another order: 3 · (−4) = −12, then −12 · 3 = −36. And g(1) = −4 · 12 = −4, which matches k.

Rung 3 of 7

A division hiding the number in front

For h(x) = x35, find k and p, say whether p is even or odd, and find h(5). (h(5) asks: the input is 5; find the output.)

Show the steps and the answer
  1. x35=15·x3.Dividing by 5 is the same as multiplying by 15.
  2. k=15 and p=3, which is odd.Now the formula is one number, 15, times x to the power 3, and 3 is one pair and one left over.
  3. 53=5·5·5=125.The power comes first: 5 · 5 = 25, and 25 · 5 = 125.
  4. h(5)=1255=25.Then divide by 5: 125 ÷ 5 = 25.
Answer
  • k=15
  • p = 3, odd
  • h(5) = 25
Double-check Write the top as 5 · 5 · 5: dividing by 5 undoes one of the three multiplications by 5, leaving 5 · 5 = 25. And h(1) = 15, which matches k.

Rung 4 of 7

Two powers of x multiplied (gotcha: the powers add)

For r(x) = 3x2 · x3, find k and p, say whether p is even or odd, and find r(2). (r(2) asks: the input is 2; find the output.)

Show the steps and the answer

x2·x3=(x·x)(x·x·x)

= x · x · x · x · x = x⁵

3x2·x3=3x⁵

  1. x2·x3=(x·x)(x·x·x)=x5.Two copies of x times three copies of x is five copies multiplied together.
  2. r(x)=3x5, so k=3 and p=5, which is odd.The formula is now one number times one power of x, and 5 is two pairs and one left over.
  3. 25=32.The power comes first: 2 · 2 · 2 · 2 · 2 = 32.
  4. r(2)=3·32=96.Then multiply by k = 3.
Answer
  • k = 3
  • p = 5, odd
  • r(2) = 96
Double-check Use the formula as first written: 3 · 22 · 23 = 3 · 4 · 8 = 96, the same. The gotcha: p is 2 + 3 = 5, not 2 · 3 = 6.

Rung 5 of 7

A number and x inside parentheses (gotcha: k is not 2)

For m(x) = (2x)3, find k and p, say whether p is even or odd, and find m(2). (m(2) asks: the input is 2; find the output.)

Show the steps and the answer

(2x)3=(2x)(2x)(2x)

= (2 · 2 · 2)(x · x · x)

=8x3

  1. (2x)3=(2x)(2x)(2x).The power 3 reaches everything inside the parentheses, the 2 as well as the x.
  2. (2x)(2x)(2x)=(2·2·2)(x·x·x)=8x3.A product can be regrouped: the three 2s make 8 and the three x's make x3.
  3. k=8 and p=3, which is odd.8x3 is one number times one power of x.
  4. m(2)=8·23=8·8=64.The power first, 23 = 8, then times k = 8.
Answer
  • k = 8
  • p = 3, odd
  • m(2) = 64
Double-check Use the formula as first written: (2 · 2)3 = 43 = 4 · 4 · 4 = 64, the same. At x = 1, (2 · 1)3 = 8, which matches k = 8.

Rung 6 of 7

A lone minus sign and a negative input (gotcha: two different minus signs)

For n(x) = −x⁶, find k and p, say whether p is even or odd, and find n(−1). (n(−1) asks: the input is −1; find the output.)

Show the steps and the answer
  1. k=−1.A lone minus sign in front means multiplying by −1: −x⁶ = −1 · x⁶.
  2. p=6, which is even.6 is three pairs.
  3. n(−1)=−(−1)6.The input −1 goes in place of x inside parentheses, so the power acts on the whole −1; the minus sign in front waits until after the power.
  4. (−1)6=1.Six minus signs make three pairs, and each pair cancels.
  5. n(−1)=−(1)=−1.Now the minus sign in front is applied.
Answer
  • k=−1
  • p = 6, even
  • n(−1)=−1
Double-check p is even, so −1 and 1 must give the same output: n(1) = −(1⁶) = −1, the same.

Rung 7 of 7

Parentheses, a negative number and a division together (genuinely hard)

For q(x) = (−2x)34, find k and p, say whether p is even or odd, and find q(2). (q(2) asks: the input is 2; find the output.)

Show the steps and the answer

(−2x)3=(−2)(−2)(−2)·x·x·x=−8x3

−8x34=−2x3

  1. (−2x)3=(−2x)(−2x)(−2x).The power 3 reaches everything inside the parentheses: the −2 and the x.
  2. (−2x)(−2x)(−2x)=(−2)(−2)(−2)·x·x·x=−8x3.Regroup: (−2)(−2) = 4 and 4 · (−2) = −8, since three minus signs leave one over; the three x's make x3.
  3. −8x34=−2x3.Dividing by 4 is multiplying by 14, which divides the number in front: −8 ÷ 4 = −2.
  4. k=−2 and p=3, which is odd.−2x3 is one number times one power of x.
  5. q(2)=−2·23=−2·8=−16.The power first, 23 = 8, then times k = −2.
Answer
  • k=−2
  • p = 3, odd
  • q(2)=−16
Double-check Use the formula as first written: (−2 · 2)3 = (−4)3 = (−4)(−4)(−4) = 16 · (−4) = −64, and −644 = −16, the same.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Calling f(x) = 2x a power function because it has a power in it.
In 2x the base 2 is fixed and the input x sits up in the exponent. In a power function it is the other way round: x is the base and the power is a fixed number. 2x doubles every time x goes up by 1, a different kind of growth with a different graph.
✓ Instead: x2 is a power function (x is the base, 2 is the fixed power); 2x is not.
✗ Not this: Calling f(x) = x3 + 1 a power function.
A power function is one number times one power of x, with nothing added. The + 1 lifts every output by 1, so at x = 0 the output is 1, and the graph misses (0, 0), a point every power function with p ≥ 1 passes through.
✓ Instead: x3 is a power function; x3 + 1 is a sum of two pieces, a kind of function this unit names later.
✗ Not this: Reading k = 3 from f(x) = (3x)2.
The power reaches everything inside the parentheses: (3x)2 = (3x)(3x) = 3 · 3 · x · x = 9x2.
✓ Instead: k = 9 and p = 2. Check at x = 1: (3 · 1)2 = 9 and 9 · 12 = 9.
✗ Not this: Treating −x⁴ and (−x)⁴ as the same function.
In −x⁴ the power acts first and the minus sign after, so at x = 2 it gives −(2⁴) = −16. In (−x)⁴ the minus sign is inside the parentheses and gets raised to the power: (−2)⁴ = 16.
✓ Instead: −x⁴ has k = −1; (−x)⁴ is the same as x⁴, with k = 1.
✗ Not this: Expecting every even power to bend into a U.
0 is even, and x⁰ counts as 1: each step down a power divides by x once more, so 23 = 8, 22 = 4, 2¹ = 2 and 2⁰ = 1. Then kx⁰ is the flat line y = k. It still mirrors across the y-axis, as every even power does, but it never bends.
✓ Instead: The U starts at p = 2. p = 0 gives a flat line and p = 1 a slanted straight line through (0, 0).

Tips and tricks

  • Check k with x = 1: every power of 1 is 1, so f(1) = k and the graph passes through (1, k). If f(1) is not the k you read, look again.
  • Check even or odd with x = −1: (−1)p is 1 when p is even and −1 when p is odd.
  • Every power function with p ≥ 1 passes through (0, 0), because any number of zeros multiplied together is 0.
  • Memory device: even evens out, odd leaves one out. Even powers from 2 up pair off every minus sign, and y = xp looks like x2; odd powers leave one minus sign over, and y = xp runs like x3, low on the left and high on the right. A negative k turns either picture upside down.
  • Do the power before multiplying by k: for 3x2 at x = 4, square first, 42 = 16, then 3 · 16 = 48. Squaring 3 · 4 = 12 gives 144, the output of a different function, (3x)2.
  • k is never 0: 0 · xp is 0 for every input, a flat line along the x-axis with no shape to read.
  • Negative and fractional exponents also make power functions: 1x = x−1 and x = x1/2. The even/odd graph rules on this page use whole-number exponents.

7 The trap

Letting the power grab the number in front. In f(x) = −3x2 the power 2 belongs to x alone. At x = 2, square first, 22 = 4, then multiply by −3 to get −12. Squaring −3 · 2 = −6 gives 36, which is the output of a different function, (−3x)2. Put the input in, do the power, and only then multiply by k.

Keep in mind

  • Exam skills: identify a power function after simplifying, read its coefficient and exponent, and evaluate negative inputs.
  • Use even/odd symmetry only for whole-number powers. Negative and fractional powers are identified in Polynomial vocabulary.

Flash cards

Say the answer out loud, then flip.

In a power function f(x) = kxp, what job does p do and what job does k do?
  • p is the power. It says how many copies of x are multiplied together, and it sets the basic shape.
  • k is the fixed number in front. It multiplies every height: it stretches, squashes, or (when negative) flips the graph over the x-axis.
A square floor tile with sides x feet long covers x2 square feet. If you double the sides, how much floor does it cover, and why?
  • Four times as much.
  • The new sides are 2x, so the tile covers 2x · 2x = 4x2 square feet. For example, sides of 3 feet cover 9 square feet, and sides of 6 feet cover 36 square feet.
Why do x and −x give the same output for an even power, but opposite outputs for an odd power?
  • A negative times a negative is positive, so minus signs cancel in pairs.
  • Even power: every minus sign has a partner. (−2)⁴ = 16, the same as 2⁴ = 16.
  • Odd power: one minus sign is left over. (−2)3 = −8, the opposite of 23 = 8.
For f(x) = −3x2, what is f(2), and what is the tempting wrong answer?
  • f(2) = −12. Do the power first: 22 = 4. Then multiply by k: −3 · 4 = −12.
  • The wrong answer is 36, which comes from squaring −3 · 2 = −6. The power 2 belongs to x alone, not to the −3.

Sources

  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Lesson 2 of 6

End behavior of a power function

Subject: MathematicsLeans on: Arrow notationLeans on: Powers of negative numbersLeans on: Signs when multiplyingLeans on: Powers come before multiplyingLeans on: Even and odd numbersOpen this lesson
Leans on 0Comes back in 1

1 In plain words

The big picture. Predict both ends of a power function f(x) = kxp when p is a positive whole number. The sign of k sets the right end, and whether p is even or odd decides whether the left end matches the right end or points the opposite way. Next, you add power functions together to make polynomials.

Think of the graph as a person seen from a long way off. You cannot see the details near the middle. You only see where the two arms point. The end behavior of a function is that distant view: what the outputs do when the input x is very far to the right, and what they do when x is very far to the left. For a power function f(x) = kxp with p a whole number 1 or more there are only four poses: both arms up, both arms down, left down with right up, or left up with right down. Two facts choose the pose. Is the power p even or odd? Is the number k in front positive or negative?

2 Picture it

−4−224−8−448−4−3−2−11234−8−448
The solid cup y = x2 has both arms up.

Reminder

Reminder: Arrow notation, Powers of negative numbers, Signs when multiplying, Powers come before multiplying, Even and odd numbers
  • Arrow notation. x → ∞ means the inputs keep growing, far to the right. x → −∞ means far to the left. f(x) → ∞ means the graph climbs without stopping, and f(x) → −∞ means it drops without stopping.
  • Powers of negative numbers. An even count of negative factors gives a positive result, and an odd count gives a negative one: (−2)4 = 16 and (−2)3 = −8.
  • Signs when multiplying. Same signs give a positive, different signs give a negative: (−3) · (−1,000) = 3,000 and (−3) · 1,000 = −3,000.
  • Powers come before multiplying. In kxp the power is done first and k multiplies afterward. At x = 3, −x2 is −(32) = −9, not 9.
  • Even and odd numbers. Even numbers split into pairs with nothing left over: 2, 4, 6, 8. Odd numbers leave one over: 1, 3, 5, 7.

3 Why

A power xp is x multiplied by itself, p factors in all. Far from zero that product is huge, so the only open question is its sign. On the right, x is positive and so is xp. On the left, x is negative. If p is even, the negative factors pair off and each pair multiplies to a positive, so xp is positive there too. If p is odd, one negative factor is left without a partner, so xp is negative. Last, k multiplies the result. A positive k keeps each sign. A negative k reverses both, which turns the whole graph upside down.

4 The rule

For f(x)=kxp with p=1, 2, 3, ...

and k≠0:
Right arm: k > 0 gives f(x)→∞ as x→∞; k < 0 gives f(x)→−∞ as x→∞.
Left arm: if p is even it matches the right arm; if p is odd it points the opposite way.

The same idea, five ways

Say it

Say it as: as x goes to infinity, f of x goes to negative infinity. In arm language: the right arm goes down.

Write it

As the inputs move farther and farther to the right, the outputs drop lower and lower without stopping.

In math
  • as x → ∞, f(x) → ∞ (right arm up)
  • as x → ∞, f(x) → −∞ (right arm down)
  • as x → −∞, f(x) → ∞ (left arm up)
  • as x → −∞, f(x) → −∞ (left arm down)
Like

Like looking at a road from an airplane: the bumps disappear, and you only see whether each end heads uphill or downhill.

See it
x → −∞, f(x) → ∞x → ∞, f(x) → −∞−22−8−448
On y = −x3 the left arm climbs while the right arm drops, and each arm gets its own line of arrow notation.

The same idea, other ways

As a picture

Keep two graphs in your head. The cup y = x2 has both arms up. The curve y = x3 rises from left to right: left arm down, right arm up. Every kxp with p = 2, 4, 6, ... and a positive k has the arms of the cup. Every kxp with p = 1, 3, 5, ... and a positive k has the arms of y = x3. A negative k turns either picture upside down, as the dashed curve shows.

−22−8−448
The solid y = x3 has its left arm down and right arm up.
With numbers

The table cubes six inputs. Look at the output row: negative under the negative inputs, positive under the positive inputs, and growing fast in both directions. That is left arm down, right arm up. A positive even power such as x2 would erase the minus signs: (−10)2 = 100 and 102 = 100, so both ends of the row would be positive and both arms would point up.

input xoutput x³−100−1000000−10−1000−1−1111010001001000000
An odd power keeps the sign of the input.
As a story

Picture two machines in a row. The first raises x to the power p, a whole number 1 or more. The second multiplies by k. Feed in a far left input such as −10. If p is even, the first machine strips the minus sign and hands on a large positive number. If p is odd, the minus sign survives. The second machine has the last word: a positive k passes the sign along, and a negative k reverses it. With p = 4 and k = −3, the input −10 becomes 10,000 and then −30,000. The left arm is down.

−10raise to thepower 4multiply by −3firstsecond10,000−30,000
The power acts first and the number in front acts last, so k has the final say on the sign.
As a rule of thumb

k points the right arm. Even copies, odd opposes. Take p to be a whole number 1 or more. On the right side x is positive and xp grows past every bound as x grows, so the output heads off with the sign of k. On the left side an even power gives the same outputs as on the right, so the left arm copies. An odd power gives the same sizes with the signs reversed, so the left arm does the opposite.

k > 0: right arm up

k < 0: right arm down

p even: left arm copies the right arm

p odd: left arm does the opposite

Why it must be true

Count the negative factors. In (−10)4 there are four of them. They make two pairs, and each pair multiplies to +100, so the answer is 100 · 100 = 10,000, a positive number. In (−10)5 there is one more factor of −10 with no partner, so the answer is 10,000 · (−10) = −100,000, a negative number. Every even power pairs off completely. Every odd power has one factor left over.

(−10)4=(−10)(−10)·(−10)(−10)

= 100 · 100 = 10,000

(−10)5=10,000·(−10)

=−100,000

Power p (1, 2, 3, ...)Sign of kLeft arm (x → −∞)Right arm (x → ∞)Picture to keep
evenk > 0f(x) → ∞, upf(x) → ∞, upy = x2, a cup
evenk < 0f(x) → −∞, downf(x) → −∞, downy = −x2, a cup turned over
oddk > 0f(x) → −∞, downf(x) → ∞, upy = x3, rising from left to right
oddk < 0f(x) → ∞, upf(x) → −∞, downy = −x3, falling from left to right

Part 1: Even power, positive k: both arms up

This is the pose of the cup y = x2. An even power turns every input other than 0 into a positive number, on the left side as well as on the right. A positive k keeps those outputs positive. So the outputs climb without stopping in both directions.

  • Pattern: f(x) = kxp with p = 2, 4, 6, ... and k > 0
  • Left arm: as x → −∞, f(x) → ∞
  • Right arm: as x → ∞, f(x) → ∞
  • Picture to keep: y = x2
upup−4−224−2246810
On y = x2 the inputs −3 and 3 give the same output 9, so both arms point up.

Worked example

F(x)=3x4

Describe the end behavior of f(x) = 3x4.

Show the steps and the answer
  1. Say what is asked: where do the outputs go when x is far to the right, and where do they go when x is far to the left?End behavior is about the two far ends of the graph and nothing else.
  2. Name the parts: k=3 and p=4.k is the number multiplying the power, and p is the exponent on x.
  3. k=3 is positive, so the right arm goes up: as x→∞,f(x)→∞.A large positive x gives a large positive x4, and 3 times that is still large and positive.
  4. p=4 is even, so the left arm copies the right arm: as x→−∞,f(x)→∞.Four negative factors make two pairs, and each pair multiplies to a positive.
Answer
  • As x → −∞, f(x) → ∞.
  • As x → ∞, f(x) → ∞.
  • Both arms up.
Double-check f(10) = 3 · 104 = 3 · 10,000 = 30,000 and f(−10) = 3 · (−10)4 = 3 · 10,000 = 30,000. Both outputs are large and positive, so both arms are up.

Part 2: Even power, negative k: both arms down

Start from the cup and turn it over. The even power still makes every input other than 0 positive. Then the negative k multiplies each of those positive numbers and makes it negative. So the outputs drop without stopping in both directions, like an umbrella.

  • Pattern: f(x) = kxp with p = 2, 4, 6, ... and k < 0
  • Left arm: as x → −∞, f(x) → −∞
  • Right arm: as x → ∞, f(x) → −∞
  • Picture to keep: y = −x2
downdown−4−224−10−8−6−4−22
On y = −x2 the inputs −3 and 3 both give −9, so both arms point down.

Worked example

F(x)=−5x2

Describe the end behavior of f(x) = −5x2.

Show the steps and the answer
  1. Say what is asked: do the outputs climb or drop far to the right, and do they climb or drop far to the left?That pair of answers is the end behavior.
  2. Name the parts: k=−5 and p=2.The minus sign belongs to k. The power 2 touches only x.
  3. k=−5 is negative, so the right arm goes down: as x→∞,f(x)→−∞.A large positive x gives a large positive x2, and negative × positive = negative.
  4. p=2 is even, so the left arm copies the right arm: as x→−∞,f(x)→−∞.Squaring a negative input gives a positive number, the same as on the right, and −5 times it is negative again.
Answer
  • As x → −∞, f(x) → −∞.
  • As x → ∞, f(x) → −∞.
  • Both arms down.
Double-check f(10) = −5 · 102 = −5 · 100 = −500 and f(−10) = −5 · (−10)2 = −5 · 100 = −500. Both outputs are negative, so both arms are down.

Part 3: Odd power, positive k: left arm down, right arm up

This is the pose of y = x3. An odd power keeps the sign of the input: negative inputs give negative results and positive inputs give positive results. A positive k leaves those signs alone. So the graph comes up from far below on the left and climbs far above on the right.

  • Pattern: f(x) = kxp with p = 1, 3, 5, ... and k > 0
  • Left arm: as x → −∞, f(x) → −∞
  • Right arm: as x → ∞, f(x) → ∞
  • Picture to keep: y = x3
downup−22−8−448
On y = x3 the input −2 gives −8 and the input 2 gives 8, so the arms point opposite ways.

Worked example

F(x)=2x3

Describe the end behavior of f(x) = 2x3.

Show the steps and the answer
  1. Say what is asked: where do the outputs go far to the right, and where do they go far to the left?The question is about the two arms only.
  2. Name the parts: k=2 and p=3.k is the number in front and p is the exponent.
  3. k=2 is positive, so the right arm goes up: as x→∞,f(x)→∞.A large positive x gives a large positive x3, and 2 times it stays positive.
  4. p=3 is odd, so the left arm does the opposite: as x→−∞,f(x)→−∞.Three negative factors leave one without a partner, so x3 is negative for negative x, and 2 times a negative is negative.
Answer
  • As x → −∞, f(x) → −∞.
  • As x → ∞, f(x) → ∞.
  • Left arm down, right arm up.
Double-check f(10) = 2 · 103 = 2 · 1,000 = 2,000 and f(−10) = 2 · (−10)3 = 2 · (−1,000) = −2,000. Positive on the right and negative on the left, as claimed.

Part 4: Odd power, negative k: left arm up, right arm down

Start from y = x3 and turn it upside down. The odd power keeps the sign of the input, and then the negative k reverses it. Negative inputs end with positive outputs, and positive inputs end with negative outputs. So the graph starts high on the left and ends low on the right.

  • Pattern: f(x) = kxp with p = 1, 3, 5, ... and k < 0
  • Left arm: as x → −∞, f(x) → ∞
  • Right arm: as x → ∞, f(x) → −∞
  • Picture to keep: y = −x3
updown−22−8−448
On y = −x3 the input −2 gives 8 and the input 2 gives −8, so the left arm is up and the right arm is down.

Worked example

F(x)=−3x3

Describe the end behavior of f(x) = −3x3.

Show the steps and the answer
  1. Say what is asked: do the outputs climb or drop far to the right, and far to the left?End behavior needs one answer for each direction.
  2. Name the parts: k=−3 and p=3.The minus sign is part of k.
  3. k=−3 is negative, so the right arm goes down: as x→∞,f(x)→−∞.A large positive x gives a large positive x3, and negative × positive = negative.
  4. p=3 is odd, so the left arm does the opposite: as x→−∞,f(x)→∞.For a negative x, x3 is negative, and negative × negative = positive.
Answer
  • As x → −∞, f(x) → ∞.
  • As x → ∞, f(x) → −∞.
  • Left arm up, right arm down.
Double-check f(10) = −3 · 103 = −3 · 1,000 = −3,000 and f(−10) = −3 · (−10)3 = −3 · (−1,000) = 3,000. Negative on the right and positive on the left, as claimed.

5 How

  1. For f(x) = −2x5, match f(x) = kxp: k = −2 and p = 5. The end-behavior rule applies because p is a positive whole number and k is not 0.
  2. Apply the right-arm rule first. k = −2 is negative, so as x → ∞, f(x) → −∞. The reason: a large positive input has a large positive fifth power, and multiplying by −2 makes it negative.
  3. Apply the left-arm rule. p = 5 is odd, so the left arm points the opposite way from the right arm: as x → −∞, f(x) → ∞. The reason: a large negative input has a large negative fifth power, and multiplying by −2 makes it positive.
  4. Write the answer in arrow notation, one line for each direction of x. In arrow notation, x → ∞ means the input moves far to the right without stopping, and f(x) → −∞ means the outputs drop without stopping. So: as x → −∞, f(x) → ∞ (left arm up), and as x → ∞, f(x) → −∞ (right arm down).
  5. Check by substitution: f(10) = −2 · 100,000 = −200,000 and f(−10) = −2 · (−100,000) = 200,000. Their signs agree with the two end rules. These values check the arithmetic; the rules describe what happens as inputs grow without bound.

Finding the end behavior of f(x) = kxp

1
Is the function written as f(x) = kxp, one number times one power of x, with p = 1, 2, 3, ...?
YesRead off k and p, with the sign of k. Go on.
NoRewrite it first, for example (−2x)4 = 16x4. If p is 0 the graph is a flat line and this rule does not apply.
↓
2
Is k positive?
YesThe right arm goes up: as x → ∞, f(x) → ∞. Go on.
Nok is negative, so the right arm goes down: as x → ∞, f(x) → −∞. Go on.
↓
3
Is p even?
YesThe left arm copies the right arm: both up or both down.
Nop is odd, so the left arm does the opposite of the right arm.
  1. Rewrite the function as one number times one power of x, and name k and p.
  2. Use the sign of k to set the right arm: positive is up, negative is down.
  3. Use p to set the left arm: even copies the right arm, odd does the opposite.
  4. Write one line for x → −∞ and one line for x → ∞.
  5. Test x = 10 and x = −10 and compare the signs of the outputs with your arms.

6 Worked example

Worked example

Both arms of f(x) = −2x5

Describe the end behavior of f(x) = −2x5. Write it in arrow notation.

Show the steps and the answer
input xoutput f(x)−10200000−12001−210−200000↓ evaluate: input given, read the output below it
The column under −10 holds a large positive output and the column under 10 holds a large negative one.
  1. Say what the question asks: when the input x is very far to the right, do the outputs climb or drop? When x is very far to the left, do they climb or drop?End behavior means the far ends of the graph only. Nothing near the middle matters here.
  2. Match the function to f(x)=kxp: k=−2 and p=5.k is the number multiplying the power, with its sign. p is the exponent on x.
  3. Right arm first. k=−2 is negative, so as x→∞,f(x)→−∞.For a large positive x, x5 is a large positive number. Multiplying it by −2 gives a large negative number, since negative × positive = negative.
  4. Left arm next. p=5 is odd, so the left arm does the opposite of the right arm: as x→−∞,f(x)→∞.For a large negative x, x5 has five negative factors. Four of them pair off into positives and one is left over, so x5 is a large negative number. Then negative × negative = positive.
  5. Put the two lines together. In words: left arm up, right arm down.A full end behavior answer always has two statements, one for each direction of x.
Answer
  • As x → −∞, f(x) → ∞ (left arm up).
  • As x → ∞, f(x) → −∞ (right arm down).
Double-check Test one large input on each side, the two marked columns of the table. f(10) = −2 · 105 = −2 · 100,000 = −200,000, far below the x-axis, so the right arm is down. f(−10) = −2 · (−10)5 = −2 · (−100,000) = 200,000, far above the x-axis, so the left arm is up. Both match.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 7

The hidden 1 in front

Describe the end behavior of f(x) = x6.

Show the steps and the answer
  1. Say what is asked: where the outputs go far to the right and far to the left.That is the meaning of end behavior.
  2. Write the hidden number: x6=1x6, so k=1 and p=6.When no number is written in front, the power is multiplied by 1.
  3. k=1 is positive, so the right arm goes up.The sign of k sets the right arm.
  4. p=6 is even, so the left arm copies the right arm and goes up too.Six negative factors make three pairs, and every pair is positive.
Answer
  • As x → −∞, f(x) → ∞.
  • As x → ∞, f(x) → ∞.
  • Both arms up.
Double-check f(10) = 106 = 1,000,000 and f(−10) = (−10)6 = 1,000,000. Both are large and positive.

Rung 2 of 7

The hidden power 1

Describe the end behavior of f(x) = 7x.

Show the steps and the answer
  1. Say what is asked: do the outputs climb or drop at each far end?Even a straight line has two ends that go somewhere.
  2. Write the hidden power: 7x=7x1, so k=7 and p=1.A bare x means x to the power 1.
  3. k=7 is positive, so the right arm goes up.The sign of k sets the right arm.
  4. p=1 is odd, so the left arm does the opposite and goes down.An odd power keeps the sign of x, so negative inputs give negative outputs.
Answer
  • As x → −∞, f(x) → −∞.
  • As x → ∞, f(x) → ∞.
  • Left arm down, right arm up.
Double-check f(100) = 7 · 100 = 700 and f(−100) = 7 · (−100) = −700. This is a straight line that rises from left to right, which agrees.

Rung 3 of 7

A lone minus sign

Describe the end behavior of f(x) = −x4.

Show the steps and the answer
  1. Say what is asked: where the outputs go far to the right and far to the left.Two answers are needed, one for each arm.
  2. Write the hidden number: −x4=−1x4, so k=−1 and p=4.The power 4 touches only x. The minus sign is a multiplication by −1 that happens after the power.
  3. k=−1 is negative, so the right arm goes down.A large positive x4 times −1 is a large negative number.
  4. p=4 is even, so the left arm copies the right arm and goes down too.x4 is positive for negative x as well, and −1 times it is negative.
Answer
  • As x → −∞, f(x) → −∞.
  • As x → ∞, f(x) → −∞.
  • Both arms down.
Double-check f(10) = −(104) = −10,000. f(−10) = −((−10)4) = −(10,000) = −10,000. Both are negative, so both arms are down.

Rung 4 of 7

A fraction in front

Describe the end behavior of f(x) = 12x5.

Show the steps and the answer
  1. Say what is asked: do the outputs climb or drop at each far end?That is the end behavior.
  2. Name the parts: k=12 and p=5.A fraction in front is still the number k.
  3. k=12 is positive, so the right arm goes up.Only the sign of k matters. Half of a huge positive number is still a huge positive number.
  4. p=5 is odd, so the left arm does the opposite and goes down.An odd power of a negative input is negative, and half of a negative number is negative.
Answer
  • As x → −∞, f(x) → −∞.
  • As x → ∞, f(x) → ∞.
  • Left arm down, right arm up.
Double-check f(10) = 12 · 100,000 = 50,000 and f(−10) = 12 · (−100,000) = −50,000. Positive on the right, negative on the left.

Rung 5 of 7

A tiny negative k

Describe the end behavior of f(x) = −0.01x6.

Show the steps and the answer
  1. Say what is asked: where the outputs go far to the right and far to the left.The question is about the arms, not about how flat the graph looks near 0.
  2. Name the parts: k=−0.01 and p=6.The decimal with its minus sign is k.
  3. k=−0.01 is negative, so the right arm goes down.The size of k changes how fast the outputs drop, not whether they drop. Only the sign decides the direction.
  4. p=6 is even, so the left arm copies the right arm and goes down too.x6 is positive on both sides, and a negative k makes both sides negative.
Answer
  • As x → −∞, f(x) → −∞.
  • As x → ∞, f(x) → −∞.
  • Both arms down.
Double-check f(10) = −0.01 · 1,000,000 = −10,000 and f(−10) = −0.01 · 1,000,000 = −10,000. Near the middle the graph is almost flat, since f(1) = −0.01, but farther out f(100) = −0.01 · 1,000,000,000,000 = −10,000,000,000. The tiny k delays the drop and cannot stop it.

Rung 6 of 7

Backward, from the arms to the formula

The graph of a power function f(x) = kxp has its left arm going up and its right arm going down. What can you say about k and p?

Show the steps and the answer
  1. Say what is asked: the arms are given and the formula is the unknown. Find the sign of k and whether p is even or odd.This is the usual question run backward, so the same two facts are used in reverse.
  2. The right arm goes down, so k is negative.The right arm always follows the sign of k.
  3. The two arms point opposite ways, so p is odd.An even power would make the left arm copy the right arm.
  4. Give one function that fits, such as f(x)=−x3.A concrete example lets you test the conclusion.
Answer
  • k is negative.
  • p is odd.
  • One function that fits: f(x) = −x3.
Double-check For f(x) = −x3: f(10) = −1,000, so the right arm is down, and f(−10) = −(−1,000) = 1,000, so the left arm is up. The arms cannot tell you the exact values of k and p, only the sign of k and whether p is even or odd.

Rung 7 of 7

A minus sign inside the parentheses

Describe the end behavior of f(x) = (−2x)4.

Show the steps and the answer
  1. Say what is asked: where the outputs go far to the right and far to the left.Same question as before. The new part is the way the formula is written.
  2. Notice that the power 4 sits on the whole parentheses. Write it out: (−2x)4=(−2x)(−2x)(−2x)(−2x).A power on parentheses repeats everything inside, the −2 included.
  3. Gather the numbers and gather the x's: (−2)(−2)(−2)(−2)=16 and x·x·x·x=x4. So f(x)=16x4.Multiplication can be done in any order. Four factors of −2 make two pairs, each equal to 4, and 4 · 4 = 16.
  4. Now k=16 and p=4. k is positive, so the right arm goes up. p is even, so the left arm copies it.The rule reads k and p from the form kxp, which is why the rewriting came first.
Answer
  • As x → −∞, f(x) → ∞.
  • As x → ∞, f(x) → ∞.
  • Both arms up.
Double-check Use the original form. f(10) = (−2 · 10)4 = (−20)4 = 160,000. f(−10) = (−2 · (−10))4 = 204 = 160,000. Both are large and positive. Compare with −2x4, where the minus sign is outside the power: there f(10) = −20,000 and both arms go down.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: f(x) = −x4 has an even power, and an even power makes everything positive, so both arms go up.
The even power makes x4 positive, but the minus sign in front is k = −1 and it multiplies after the power. Positive × negative = negative.
✓ Instead: Both arms go down. f(10) = −10,000 and f(−10) = −10,000.
✗ Not this: f(x) = −2x3 has a negative k, so f(x) → −∞ on both sides.
On the left, x3 is already negative because the power is odd. Multiplying by the negative k gives negative × negative = positive.
✓ Instead: As x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞. Left arm up, right arm down. f(−10) = 2,000 and f(10) = −2,000.
✗ Not this: f(x) = 0.001x3 has such a small k that the arms flatten out and stop rising.
The size of k changes how fast the outputs grow, not where they end up. f(1,000) = 0.001 · 1,000,000,000 = 1,000,000.
✓ Instead: Same arms as y = x3: left arm down, right arm up.
✗ Not this: For f(x) = x2, as x → −∞ the outputs must go to −∞ as well, because x is negative there.
x → −∞ says where you are standing, far to the left. It says nothing yet about the height of the graph there. (−100)2 = 10,000, a large positive output.
✓ Instead: As x → −∞, f(x) → ∞. The arrow on x and the arrow on f(x) are two separate statements.
✗ Not this: f(x) = 5x0 has an even power (0 is even) and a positive k, so both arms go up.
This is a case where the rule does not apply. Any number other than 0 raised to the power 0 is 1, so f(x) = 5 for those inputs. The graph is a flat line at height 5 and its ends go neither up nor down.
✓ Instead: The rule needs p = 1, 2, 3, ... With p = 0 the outputs stay at k.

Tips and tricks

  • Memory device: k points the right arm. Even copies, odd opposes. Positive k, right arm up. Negative k, right arm down. Then an even p makes the left arm copy the right arm, and an odd p makes it do the opposite.
  • Two pictures cover everything: the cup y = x2 for even powers and the rising curve y = x3 for odd powers. If k is negative, turn the picture upside down.
  • Check any answer with x = 10 and x = −10. You only need the signs of the two outputs: positive means that arm is up, negative means it is down.
  • The size of k and the size of p never change the direction of an arm. Only the sign of k and whether p is even or odd matter.
  • Write the hidden numbers before you decide: x6 is 1x6, −x4 is −1x4, and 7x is 7x1.
  • Do not memorize the four rows of the table. Rebuild them from the memory device or from the two pictures whenever you need them.

7 The trap

Reading −x4 as (−x)4. The power touches only x. The minus sign in front is k = −1 and is applied last. So −x4 has both arms down, while (−x)4 = x4 has both arms up. Before deciding anything, write k out with its sign: k = −1, k = −2, and so on.

Keep in mind

  • Exam skills: write both end-behavior arrows and work backward from the ends to the sign and exponent parity.
  • A minus outside an even power flips the outputs. A minus inside that power is raised with the base.

Flash cards

Say the answer out loud, then flip.

What does the end behavior of a function tell you?
It is the view from a long way off, like a person so distant that you only see where the two arms point. It says what the outputs do when x is very far to the right, and what they do when x is very far to the left.
For a power function f(x) = kxp with p = 1, 2, 3, ..., which fact sets the right arm and which sets the left arm?
  • Right arm: the sign of k. Positive k points it up, negative k points it down.
  • Left arm: the power p. Even p makes it match the right arm. Odd p makes it point the opposite way.
Where do the two arms of f(x) = −2x3 point?
  • Here k = −2 and p = 3.
  • Right arm: k is negative, so as x → ∞, f(x) → −∞. The arm points down.
  • Left arm: p is odd, so it does the opposite. As x → −∞, f(x) → ∞. The arm points up.
  • Check: f(10) = −2000 and f(−10) = 2000.
Do −x4 and (−x)4 have the same end behavior?
  • No.
  • In −x4 the power touches only x, and k = −1 is applied last. Both arms point down.
  • In (−x)4 the minus sign is inside the power, so it equals x4. Both arms point up.
  • Check with x = 10: −x4 gives −10000, and (−x)4 gives 10000.

Lesson 3 of 6

Polynomial vocabulary

Subject: MathematicsLeans on: Subtracting is adding a negativeLeans on: The invisible 1Leans on: Power 1 and power 0Leans on: Multiplying powers of xLeans on: DistributingLeans on: Multiplying two bracketsLeans on: Combining like termsLeans on: Signs when multiplyingOpen this lesson
Leans on 0Comes back in 0

1 In plain words

The big picture. Learn to identify a polynomial and name its parts. Build on power functions by adding terms with whole-number exponents. The highest power determines the degree and leading term, which the next lesson uses to predict the graph’s ends.

A polynomial is a sum of pieces, and each piece is a number times x raised to a whole-number power. Picture a team lined up for a photo. Each player is one piece, called a term. The number on a player's shirt is the coefficient: the number that multiplies the power of x. The player's height is the exponent on x. The tallest player is the leading term. That player's height is the degree of the whole polynomial, and that player's shirt number is the leading coefficient. The tallest player is still the tallest when standing in the middle of the row. So you find the leading term by height, not by position in the line.

2 Picture it

f(x)=−2x4+x3−7x+5

terms: −2x4, x3, −7x, 5

coefficients: −2, 1, −7, 5

degree: 4 (the highest power)

leading term: −2x4

leading coefficient: −2

constant term: 5

Reminder

Reminder: Subtracting is adding a negative, The invisible 1, Power 1 and power 0, Multiplying powers of x, Distributing, Multiplying two brackets, Combining like terms, Signs when multiplying
  • Subtracting is adding a negative. 8 − 3 is the same as 8 + (−3). In the same way x2 − 4x is x2 + (−4x), so the term is −4x.
  • The invisible 1. x means 1·x and −x means −1·x, the way one apple is still 1 apple when no number is said.
  • Power 1 and power 0. x alone is x1. Any nonzero number to the power 0 is 1: going down the list 23 = 8, 22 = 4, 21 = 2, each step halves, so 20 = 1. That is why 7 = 7·x0.
  • Multiplying powers of x. Add the exponents: x2·x3 = x5, because (x·x)·(x·x·x) is five x's multiplied together. Numbers multiply numbers and x's multiply x's: 2x·3x = 6x2.
  • Distributing. The number outside multiplies every term inside: 3(x + 4) = 3x + 12. Test with x = 1: 3·5 = 15 and 3 + 12 = 15.
  • Multiplying two brackets. Every term in the first bracket multiplies every term in the second: (x + 2)(x + 3) = x2 + 3x + 2x + 6 = x2 + 5x + 6.
  • Combining like terms. Terms with the same power of x add by adding their coefficients: 3x + 2x = 5x, like 3 apples plus 2 apples. Different powers stay apart: 3x2 + 2x cannot be combined.
  • Signs when multiplying. Same signs give a positive, different signs give a negative: (−2)(−5) = 10 and (3)(−4) = −12.

3 Why

A polynomial is built by adding the power functions kxp from earlier in this unit, so the vocabulary names the two numbers each piece carries: the coefficient k and the power p. The sign travels with the coefficient because subtracting is adding a negative: 3x2 − 5x means 3x2 + (−5x), so the second term is −5x. Writing the highest power first is a convention called standard form. Adding in any order gives the same total, so nothing breaks in the arithmetic if you ignore it. What breaks is communication: the first term and the leading term stop matching, and people read off the wrong one.

4 The rule

A polynomial is a sum of terms a·xn: each coefficient a is a real number and each power n is a whole number (0, 1, 2, 3, ...).

Standard form lists the powers from highest to lowest: f(x) = anxn + ... + a2x2 + a1x + a0, with an ≠ 0; every polynomial except 0 itself can be written this way. The degree is n, the highest power. The leading term is anxn. The leading coefficient is an.source 1 The constant term is a0. The zero polynomial, 0, has no degree and no leading term.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

The same idea, five ways

Say it

f of x equals negative two x to the fourth, plus x cubed, minus seven x, plus five. It is a polynomial of degree four with leading coefficient negative two.

Write it

The polynomial f has four terms. Its degree is 4, its leading term is −2x4, its leading coefficient is −2 and its constant term is 5.

In math
  • f(x)=−2x4+x3−7x+5
  • f(x) = anxn + ... + a1x + a0, with an ≠ 0
  • degree of f = 4
  • leading term: −2x4
  • leading coefficient: a4 = −2
Like

A team lined up tallest first: each player is a term, the shirt number is the coefficient, and the tallest player's height is the degree.

See it

anxn+...+a1x+a0

degree: n

leading term: anxn

leading coefficient: an

constant term: a0

The same idea, other ways

As a picture

Draw a row of slots, one for each power of x from the top power down to 0, and drop each coefficient into its slot. For f(x) = −2x4 + x3 − 7x + 5 the slots hold −2, 1, 0, −7 and 5. The 0 marks the missing x2 term. The first slot shows the degree on top (4) and the leading coefficient underneath (−2).

input power of xoutput coefficient4−231201−705↓ evaluate: input given, read the output below it
The highlighted column is the leading term: power 4 on top, leading coefficient −2 underneath.
With numbers you already know

The number 4,073 is a polynomial in disguise: 4·103 + 0·102 + 7·10 + 3. Replace 10 with x and you get 4x3 + 0x2 + 7x + 3. The digits are the coefficients. The first digit, 4, is the leading coefficient. The top exponent on ten, the 3 in 103, is the degree. The 0 digit holds the place of the missing x2 term. Writing thousands before hundreds before tens is standard form, and you have used it all your life.

4073=4·103+0·102+7·10+3

4x3 + 0x2 + 7x + 3 at x = 10

digits 4, 0, 7, 3 = coefficients

first digit 4 = leading coefficient

top exponent 3 = degree

As a rule of thumb

Combine like terms first, so that no power appears twice. Then, for any polynomial other than 0, ask three questions, in this order. What is the highest power whose coefficient is not 0? That is the degree. Which term carries it? That is the leading term. What number multiplies it? That is the leading coefficient. The order on the page and the size of the numbers never enter.

Why the bracket shortcut must be true

When brackets are multiplied, every term of one multiplies every term of the other, and the exponents add. The largest exponent can come from one product only: the highest power in each bracket times the highest power in the others. In (2x + 3)(x − 4) the four products are 2x2, −8x, 3x and −12. Only 2x·x reaches power 2, so nothing can cancel it, and 2x2 is the leading term.

2x²−8x2x3x−12+3x−4
Only the top-left cell, leading term times leading term, reaches the power 2.
Term of f(x) = −2x4 + x3 − 7x + 5CoefficientPower of xWhat to notice
−2x4−24Highest power, so this is the leading term. The degree is 4 and the leading coefficient is −2.
x313No number is written, so the coefficient is 1.
−7x−71The minus sign belongs to the coefficient, and x alone means x1.
550No x at all, so the power is 0. This is the constant term.

Part 1: Polynomial

A polynomial is a sum of power functions. Every piece is a number times x to a whole-number power. The powers work like the floors of a building with no basement and no half floors: 0, 1, 2, 3 and up. The numbers in front, the coefficients, can be any real numbers, including negatives, fractions and roots of numbers.

  • Allowed powers of x: 0, 1, 2, 3, ... (whole numbers only).
  • Allowed coefficients: any real number, such as −4, 23 or 5.
  • Not a polynomial: x in the bottom of a fraction, as in 3x; x under a root that does not simplify away, as in x; x as an exponent, as in 2x.
  • A single power function with a whole-number power, such as 3x4, is a polynomial with one term.

polynomial: 5x3 − 12x + 2

polynomial: 7

not a polynomial: 4x2 + 3x

not a polynomial: 2x + 1

Worked example

Polynomial or not

Which of these are polynomials? (a) 5x3 − 12x + 2 (b) 4x2 + 3x (c) 2x + 1 (d) 7. In plain words: for each one, decide whether every piece is a number times a whole-number power of x.

Show the steps and the answer
  1. (a) List the powers of x: 3, 1 and 0. It is a polynomial.x alone is x1, and 2 has no x, so it is 2·x0. All three powers are whole numbers. The fraction and the root sit in the coefficients, which is allowed.
  2. (b) Look at 3x: x is in the bottom of a fraction. It is not a polynomial.Dividing by x is not multiplying by a whole-number power of x.
  3. (c) Look at 2x: x is the exponent. It is not a polynomial.In a polynomial x is the base and a fixed whole number sits on top. Here the roles are swapped.
  4. (d) Write 7 as 7·x0. It is a polynomial with one term.x0 = 1, so a plain number is a number times the power 0 of x.
Answer
  • (a) polynomial
  • (b) not a polynomial
  • (c) not a polynomial
  • (d) polynomial
Double-check Second way: try to rewrite each one as numbers times whole-number powers. (a) is 5·x3 + (−12)·x1 + 2·x0 and (d) is 7·x0, so both fit the pattern. For (b) and (c) no such rewriting exists: one divides by x and the other has x as the exponent.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: 12x2 + 3 is not a polynomial because it contains a fraction.
The fraction is the coefficient. Only the power of x has to be a whole number, and here the powers are 2 and 0.
✓ Instead: 12x2 + 3 is a polynomial. Compare 1x2 + 3, which is not, because there x is in the bottom.

Part 2: Term

A term is one of the pieces being added. Cut the polynomial at each plus or minus sign, the way you tear a strip of tickets at the perforations. The sign at the tear stays with the ticket to its right, so a minus sign is part of the term that follows it.

  • Terms are separated by + and − signs.
  • A minus sign belongs to the term after it: in x2 − 4x the terms are x2 and −4x.
  • The term with no x is called the constant term.
  • Count the terms only after like terms have been combined.

p(x)=6x3−4x+11−x2

as a sum: 6x3 + (−4x) + 11 + (−x2)

terms: 6x3, −4x, 11, −x2

constant term: 11

Worked example

Listing the terms

List the terms of p(x) = 6x3 − 4x + 11 − x2. In plain words: tear the formula into the pieces that are being added.

Show the steps and the answer
  1. Rewrite as a sum: 6x3+(−4x)+11+(−x2).Subtracting is adding a negative, so every piece is now joined by a plus sign.
  2. Read the pieces: 6x3,−4x, 11 and −x2.Each piece of the sum is one term, with its sign.
Answer
Four terms: 6x3, −4x, 11 and −x2.
Double-check Put x = 1 into the formula: 6 − 4 + 11 − 1 = 12. Add the four terms at x = 1: 6 + (−4) + 11 + (−1) = 12. The terms add back to the polynomial.

Part 3: Coefficient

The coefficient is the number multiplying the power of x in a term. In 5x3 it is 5. It counts copies, like the 6 in a six-pack: 5x3 is five copies of x3. When no number is written, one copy is meant, so the coefficient is 1. When a power of x is missing from the polynomial, there are zero copies of it.

  • Nothing written in front: the coefficient is 1.
  • Only a minus sign in front: the coefficient is −1.
  • A power that does not appear has coefficient 0.
  • The constant term is its own coefficient.

q(x)=x4−3x3+25x−8

x4: coefficient 1

x3: coefficient −3

x2: coefficient 0 (missing)

x: coefficient 25

constant: −8

Worked example

Reading every coefficient, including the hidden ones

For q(x) = x4 − 3x3 + 25x − 8, name the coefficient of each power of x from x4 down to the constant. In plain words: for each power, say what number multiplies it.

Show the steps and the answer
  1. x4: the coefficient is 1.No number is written, and x4 means 1·x4.
  2. x3: the coefficient is −3.The minus sign belongs to the term that follows it.
  3. x2: the coefficient is 0.No x2 term appears. Zero copies of x2 add nothing, since 0·x2 = 0.
  4. x: the coefficient is 25.A fraction in front of x is a number multiplying x1.
  5. Constant term: −8.The constant term is −8·x0, so it is its own coefficient.
Answer
  • x4:1
  • x3:−3
  • x2:0
  • x:25
  • Constant term: −8
Double-check Rebuild from the coefficients: 1·x4 + (−3)·x3 + 0·x2 + 25·x + (−8) = x4 − 3x3 + 25x − 8, the original. With x = 5 both give 625 − 375 + 2 − 8 = 244.

Part 4: Degree

The degree is the highest power of x in the polynomial, once it is expanded and like terms are combined. It is one number for the whole polynomial. Think of the height of a building: it is the top floor, no matter how many floors sit below it or which of them are empty.

  • Degree = the largest exponent on x whose coefficient is not 0.
  • Degree 0: a nonzero constant such as 7. Degree 1: a line such as 3x − 2. Degree 2: a quadratic such as x2 + 1. Degree 3: a cubic such as 2x3 − x.
  • The degree counts the power, not the number of terms: x5 + 1 has two terms and degree 5.
  • Powers are never added across terms: x3 + x2 has degree 3, not 5.

7: degree 0

3x − 2: degree 1

x2 + 1: degree 2

2x3 − x: degree 3

x5 + 1: degree 5

Worked example

A degree that hides until like terms are combined

Find the degree of r(x) = 2x3 + 5x2 − 2x3 + x − 1. In plain words: find the highest power of x that is still there after the formula is tidied up.

Show the steps and the answer
  1. Spot the like terms: 2x3 and −2x3 have the same power of x.Terms with the same power of x can be combined into one term.
  2. Combine them: 2x3−2x3=0x3=0.Add the coefficients: 2 + (−2) = 0. Zero copies of x3 is nothing.
  3. Write what is left: r(x)=5x2+x−1.The x3 terms cancelled, so they drop out.
  4. The highest power left is 2, so the degree is 2.The degree is the highest power with a coefficient that is not 0.
Answer
Degree 2.
Double-check Put x = 2 into both forms. Original: 16 + 20 − 16 + 2 − 1 = 21. Tidied: 20 + 2 − 1 = 21. They agree, and the tidied form has no power above 2.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: r(x) = 2x3 + 5x2 − 2x3 + x − 1 has degree 3 because x3 appears in it.
The two x3 terms cancel. A power with coefficient 0 is not there.
✓ Instead: Combine like terms first: r(x) = 5x2 + x − 1, degree 2.

Part 5: Leading term

The leading term is the term with the highest power of x. It is the whole piece: sign, coefficient and power together. In a parade the leader walks in front, and standard form puts this term in front. When the polynomial is written out of order, the leader is somewhere in the row and you find it by its power.

  • Leading term = the term whose power equals the degree.
  • It includes its sign: in 4 − x2 the leading term is −x2.
  • In standard form it is the first term.
  • For a single power function kxp with k ≠ 0 and a whole-number power p, the leading term is the whole function.

s(x)=12+5x−12x3+4x2

powers as written: 0, 1, 3, 2

leading term: −12x3

standard form: −12x3 + 4x2 + 5x + 12

Worked example

Finding a leading term that is not written first

Find the leading term of s(x) = 12 + 5x − 12x3 + 4x2. In plain words: find the piece with the highest power of x and report the whole piece.

Show the steps and the answer
  1. Write the power of x in each term: 0, 1, 3 and 2.12 is 12·x0 and 5x is 5·x1.
  2. The largest power is 3, carried by −12x3.The leading term is chosen by its power, and the minus sign in front belongs to it.
  3. Write standard form: s(x)=−12x3+4x2+5x+12.Powers fall 3, 2, 1, 0, and the leading term now stands first.
Answer
Leading term: −12x3.
Double-check Put x = 2 into both orders. As written: 12 + 10 − 4 + 16 = 34, since 12·8 = 4. Standard form: −4 + 16 + 10 + 12 = 34. Same polynomial, and its first term in standard form is −12x3.

Part 6: Leading coefficient

The leading coefficient is the coefficient of the leading term: the number multiplying the highest power of x. It is one number, with its sign. If the leading term is the tallest player in the team photo, the leading coefficient is the number on that player's shirt.

  • Leading coefficient = the coefficient of the highest power of x.
  • It can be negative, a fraction or 1. It is never 0, because then that term would vanish and a lower power would lead.
  • It need not be the biggest coefficient: in 2x5 + 9x2 it is 2.
  • For a power function kxp with k ≠ 0 and a whole-number power p, it is k, the number whose sign you used earlier in this unit to see where the arms point.

t(x)=3x2−x5+8

leading term: −x5 = −1·x5

leading coefficient: −1

Worked example

A leading coefficient that is not printed

Find the leading coefficient of t(x) = 3x2 − x5 + 8. In plain words: find the piece with the highest power of x, then say what number multiplies that power.

Show the steps and the answer
  1. Write the powers: 2, 5 and 0. The largest is 5.The leading term is the one with the highest power.
  2. The leading term is −x5.The minus sign in front of x5 belongs to that term.
  3. Write −x5 as −1·x5. The leading coefficient is −1.A lone minus sign means the coefficient is −1.
Answer
Leading coefficient: −1.
Double-check Standard form is −x5 + 3x2 + 8, and the number multiplying its first term is −1. Test with x = 2: −x5 = −32, and −1·25 = −1·32 = −32, the same.

Part 7: Factored form and expanded form

The same polynomial can be written two ways. Expanded form is a sum of terms, like a receipt with every item listed. Factored form is a product of brackets, like a sealed carton marked 3 packs of 4. The brackets being multiplied are called factors. Terms and coefficients are read from the expanded form, so a factored polynomial is multiplied out to list them: every term in one bracket multiplies every term in the other. The degree can also be found without that, by adding the degrees of the factors.

  • Expanded form: a sum, for example x2 + 3x − 4.
  • Factored form: a product, for example (x + 4)(x − 1).
  • Both name the same function: they give the same output for every input.
  • Shortcut for the degree and leading term only: multiply the leading terms of all the factors.
x²−xx4x−4+4x−1
The four cells are the four products, and they add up to the expanded form x2 + 3x − 4.

Worked example

From brackets to a sum of terms

Expand k(x) = (x + 4)(x − 1), then give its degree, leading term and leading coefficient. In plain words: multiply the brackets out into a sum, then name the piece with the highest power.

Show the steps and the answer
  1. Multiply each term of the first bracket by each term of the second: x·x=x2,x·(−1)=−x,4·x=4x,4·(−1)=−4.Every term in one bracket multiplies every term in the other. These are the four cells of the picture.
  2. Add the four products: x2−x+4x−4.The product of the brackets is the sum of the four cells.
  3. Combine like terms: −x+4x=3x, so k(x)=x2+3x−4.Both terms have x to the power 1, so their coefficients add: −1 + 4 = 3.
  4. Read the highest power: 2. Degree 2, leading term x2, leading coefficient 1.x2 with no number in front means 1·x2.
Answer
  • Expanded form: k(x) = x2 + 3x − 4
  • Degree: 2
  • Leading term: x2
  • Leading coefficient: 1
Double-check Put x = 2 into both forms. Factored: (2 + 4)(2 − 1) = 6·1 = 6. Expanded: 4 + 6 − 4 = 6. They match. The shortcut agrees too: leading term times leading term is x·x = x2.

Part 8: Sorting function types

Think of two labels on a storage box. A formula can earn both labels. The power label asks for one fixed multiple of one fixed power. The polynomial label asks for whole-number powers of x. Read the formula after simplifying, the way you unpack a box before naming its contents.

  • Why: (x3)2 repeats x3 twice, so it contains six copies of x. Simplifying can reveal one power that was hidden.
  • Power function: kxp, with k ≠ 0 and p fixed. Negative and fractional p are allowed where the expression is real and defined.
  • Polynomial: a sum of real coefficients times xn, with n = 0, 1, 2, ...; it is defined for every real x.
  • Method: simplify; check for one power; check every exponent and the domain; report both labels when both tests pass.
  • A root of a number can be a coefficient. A root of x changes its exponent. Cancelling a denominator does not fill a missing input.

one fixed power → power function

only whole-number powers → polynomial

16x⁶ → both

7x−5 → power only

Worked example

One formula can belong to both groups

Sort A: (−4x3)2; B: 7x⁵; C: x2 + 8; D: 6x−2. Use Both, Power only, Polynomial only or Neither for each.

What it asks. Sort A: (−4x3)2; B: 7x⁵; C: x2 + 8; D: 6x−2. Use Both, Power only, Polynomial only or Neither for each.

Show the steps and the answer

The plan. Simplify first. Test the one-power rule and the polynomial rule separately.

one fixed power → power function

only whole-number powers → polynomial

16x⁶ → both

7x−5 → power only

  1. Plan. Simplify first. Test the one-power rule and the polynomial rule separately.
  2. Simplify first. Test the one-power rule and the polynomial rule separately.
  1. A: (−4x3)2=(−4)2(x3)2=16x6. Both.Squaring multiplies two copies. There are six x factors, and 16 is a fixed coefficient.
  2. B: 7x⁵=7x−5. Power only; x≠0.A negative exponent means take the reciprocal. The exponent is fixed, but it is not a whole number.
  3. C: x2+8 is Polynomial only.Its powers are 2 and 0. Two nonzero terms remain, so it is not one fixed multiple of a single power.
  4. D: 6x−2 is Neither.The variable is in the exponent. That makes an exponential function; a power function has a fixed exponent.
Answer
  • A: Both
  • B: Power only
  • C: Polynomial only
  • D: Neither
Double-check At x = 2, A gives (−32)2 = 1024 and 16 · 2⁶ = 1024. B gives 7/32 in either form. The fixed-power and whole-power tests agree with all four labels.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Any expression with a fraction or a root is neither kind.
A fraction can be a constant coefficient, and a root of x is a fractional power.
✓ Instead: Check what is raised to a power and where the variable occurs.
Tips and tricks
  • For an exam, practice this method with the answer folded. Check each step against the reason beside it.

5 How

  1. For g(x) = 4x2 − 9 + 3x5 − x, apply the polynomial definition. The powers of x are 2, 0, 5 and 1, all whole numbers, and each coefficient is real, so g is a polynomial. No brackets need multiplying out, and no two terms share a power of x, so nothing needs combining.
  2. Use the term and coefficient definitions. Keep each minus sign with its term: 4x2, −9, 3x5, −x have coefficients 4, −9, 3, −1. The term −x means −1 times x, and the constant −9 has power 0.
  3. Use the degree rule to choose the highest power with a nonzero coefficient: 5. Its term 3x5 is the leading term, and 3 is the leading coefficient. Position in the written formula does not determine the degree.
  4. Use standard form to reorder the terms from highest power to lowest: g(x) = 3x5 + 4x2 − x − 9. Addition allows this rearrangement when each term keeps its sign.
  5. Check the rearrangement term by term: the same four signed terms occur once each. Then substitute x = 2 into both orders: 4(2)2 − 9 + 3(2)5 − 2 = 16 − 9 + 96 − 2 = 101 and 3(2)5 + 4(2)2 − 2 − 9 = 96 + 16 − 2 − 9 = 101. Matching outputs support the check; keeping every signed term is what makes the two forms equal.

Naming the parts of any polynomial

1
After simplifying without changing where it is defined, does x still appear in the bottom of a fraction, under a root, or as an exponent?
YesIt is not a polynomial. Stop: it has no degree and no leading term.
NoGo on.
↓
2
Are brackets multiplied together, or does a number or a power of x multiply a bracket?
YesMultiply out to get a sum of terms. If only the degree and leading term are wanted, multiply the leading term of every factor.
NoGo on.
↓
3
Do two or more terms have the same power of x?
YesCombine them into one term by adding their coefficients. Drop any term whose coefficient becomes 0.
NoGo on.
↓
4
Is the highest power written first?
YesThe first term is the leading term. Read the degree and the leading coefficient from it.
NoFind the highest power wherever it sits, read the degree, leading term and leading coefficient from that term, then rewrite in standard form. If every term cancels, the polynomial is 0 and has no degree.
  1. Make sure it is a polynomial: only whole-number powers of x, after any simplifying that keeps it defined for every real x.
  2. Get it into expanded form: multiply out any brackets, then combine like terms.
  3. Circle each term together with its sign.
  4. Under each term write its coefficient and its power. Fill in the invisible 1, the power 1 on a bare x and the power 0 on a constant.
  5. Find the largest power with a coefficient other than 0. Name the degree, the leading term and the leading coefficient from that one term. The zero polynomial has none of the three.
  6. Write the terms from the highest power to the lowest. That is standard form, and the leading term now stands first.
  7. Check by putting x = 2 into the starting formula and into your standard form. The outputs must match.

6 Worked example

Worked example

Naming every part of a polynomial written out of order

For g(x) = 4x2 − 9 + 3x5 − x, list the terms and their coefficients, then give the degree, the leading term and the leading coefficient, and write g in standard form. In plain words: break the formula into the pieces being added, find the piece with the highest power of x, and put the pieces in order from highest power to lowest.

Show the steps and the answer

g(x)=4x2−9+3x5−x

powers as written: 2, 0, 5, 1

highest power: 5

standard form: 3x5 + 4x2 − x − 9

  1. Rewrite every subtraction as adding a negative: g(x)=4x2+(−9)+3x5+(−x).Subtracting is the same as adding a negative, so each minus sign belongs to the term that follows it.
  2. Read off the terms: 4x2,−9,3x5 and −x. There are four terms.A term is one of the pieces being added.
  3. Read off the coefficients: 4, −9, 3 and −1.The coefficient is the number multiplying the power of x. −x means −1·x, and the constant −9 is its own coefficient.
  4. Write the power of x in each term: 2, 0, 5 and 1.x alone is x1. The constant −9 is −9·x0, since x0 = 1.
  5. Pick the largest power: 5. The degree is 5.The degree of a polynomial is the highest power of x that appears.
  6. The term carrying the power 5 is 3x5. That is the leading term, and its coefficient 3 is the leading coefficient.The leading term is chosen by its power, not by where it is written. Here it is the third term on the page.
  7. Write the terms from highest power to lowest: g(x)=3x5+4x2−x−9.Standard form lists the powers in falling order: 5, 2, 1, 0.
Answer
  • Terms: 4x2, −9, 3x5, −x
  • Coefficients: 4, −9, 3, −1
  • Degree: 5
  • Leading term: 3x5
  • Leading coefficient: 3
  • Standard form: g(x) = 3x5 + 4x2 − x − 9
Double-check Put x = 2 into both orders. As written: 4·4 − 9 + 3·32 − 2 = 16 − 9 + 96 − 2 = 101. Standard form: 96 + 16 − 2 − 9 = 101. The outputs match, so reordering changed nothing, and in standard form the first term is 3x5, the leading term found above.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 9

Already in standard form

Name the terms, the coefficients, the degree, the leading term and the leading coefficient of f(x) = 2x3 + 5x2 + x + 7. In plain words: break the formula into its pieces and name them.

Show the steps and the answer
  1. Split at the plus signs: 2x3,5x2, x and 7.Terms are the pieces being added.
  2. Read the coefficients: 2, 5, 1 and 7.x with no number in front means 1·x, and the constant term is its own coefficient.
  3. Read the powers: 3, 2, 1 and 0.x alone is x1, and 7 is 7·x0.
  4. The highest power is 3: the degree is 3, the leading term is 2x3 and the leading coefficient is 2.All three are read from the term with the highest power.
Answer
  • Terms: 2x3, 5x2, x, 7
  • Coefficients: 2, 5, 1, 7
  • Degree: 3
  • Leading term: 2x3
  • Leading coefficient: 2
Double-check The powers 3, 2, 1, 0 already fall from left to right, so this is standard form and its first term, 2x3, must be the leading term. Also, putting x = 1 into the formula adds the coefficients: 2 + 5 + 1 + 7 = 15, which matches 2·1 + 5·1 + 1 + 7 = 15.

Rung 2 of 9

Minus signs and coefficients that are not printed

Name the terms, the coefficients, the degree, the leading term and the leading coefficient of g(x) = −x4 + 6x2 − x − 3. Also give the coefficient of x3. In plain words: name the pieces, taking care with the signs and the hidden numbers.

Show the steps and the answer
  1. Rewrite as a sum: −x4+6x2+(−x)+(−3).Each minus sign belongs to the term that follows it.
  2. Terms: −x4,6x2,−x and −3.These are the pieces of the sum.
  3. Coefficients: −1, 6, −1 and −3.A lone minus sign means −1: −x4 = −1·x4 and −x = −1·x.
  4. The coefficient of x3 is 0.No x3 term appears, so there are zero copies of x3.
  5. Powers: 4, 2, 1, 0. The highest is 4: degree 4, leading term −x4, leading coefficient −1.The leading term keeps its sign, and its coefficient is the hidden −1.
Answer
  • Terms: −x4, 6x2, −x, −3
  • Coefficients: −1, 6, −1, −3
  • Coefficient of x3: 0
  • Degree: 4
  • Leading term: −x4
  • Leading coefficient: −1
Double-check Rebuild from the coefficients at x = 2: (−1)·16 + 0·8 + 6·4 + (−1)·2 + (−3) = −16 + 0 + 24 − 2 − 3 = 3. The formula gives −16 + 24 − 2 − 3 = 3. They match.

Rung 3 of 9

Out of order, with a fraction

Write h(x) = 8 − 34x2 + 5x6 − 2x3 in standard form and give its degree, leading term and leading coefficient. In plain words: sort the pieces from highest power to lowest and name the first one.

Show the steps and the answer
  1. Write the power in each term as written: 0, 2, 6 and 3.8 is 8·x0. The order on the page is not the order of the powers.
  2. The highest power is 6, carried by 5x6. Degree 6, leading term 5x6, leading coefficient 5.The leading term is chosen by its power, wherever it sits.
  3. Sort the terms by falling power, each with its sign: 5x6−2x3−34x2+8.Standard form runs from the highest power to the lowest: 6, 3, 2, 0.
Answer
  • Standard form: h(x) = 5x6 − 2x3 − 34x2 + 8
  • Degree: 6
  • Leading term: 5x6
  • Leading coefficient: 5
Double-check Put x = 2 into both orders, using 34·4 = 3, 5·64 = 320 and 2·8 = 16. As written: 8 − 3 + 320 − 16 = 309. Standard form: 320 − 16 − 3 + 8 = 309. They match.

Rung 4 of 9

Distribute a number, then combine like terms

Find the degree, the leading term and the leading coefficient of p(x) = 3(2x2 − x) + 5x − 6x2. In plain words: tidy the formula into a sum with one term for each power, then name the highest power left.

Show the steps and the answer
  1. Distribute the 3: 3·2x2=6x2 and 3·(−x)=−3x, so p(x)=6x2−3x+5x−6x2.The number outside a bracket multiplies every term inside it.
  2. Combine the x2 terms: 6x2−6x2=0.Same power, so add the coefficients: 6 + (−6) = 0. The x2 terms cancel.
  3. Combine the x terms: −3x+5x=2x.Same power, so add the coefficients: −3 + 5 = 2.
  4. What is left is p(x)=2x. Degree 1, leading term 2x, leading coefficient 2.x alone is x1, and it is the only power left.
Answer
  • p(x) = 2x
  • Degree: 1
  • Leading term: 2x
  • Leading coefficient: 2
Double-check Put x = 2 into the original: 3(8 − 2) + 10 − 24 = 18 + 10 − 24 = 4. The tidied form gives 2·2 = 4. With x = 3: 3(18 − 3) + 15 − 54 = 45 + 15 − 54 = 6, and 2·3 = 6. They match both times.

Rung 5 of 9

Two brackets

Expand q(x) = (2x + 3)(x − 4) and name its terms, coefficients, degree, leading term and leading coefficient. In plain words: multiply the brackets out into a sum, then name the pieces.

Show the steps and the answer
2x²−8x2x3x−12+3x−4
The two middle cells, −8x and 3x, are like terms and combine into −5x.
  1. Multiply each term of the first bracket by each term of the second: 2x·x=2x2,2x·(−4)=−8x,3·x=3x,3·(−4)=−12.Every term in one bracket multiplies every term in the other. These are the four cells of the picture.
  2. Add the products: 2x2−8x+3x−12.The product of the brackets is the sum of the four cells.
  3. Combine like terms: −8x+3x=−5x, so q(x)=2x2−5x−12.Both have x to the power 1, and −8 + 3 = −5.
  4. Terms: 2x2,−5x,−12. Coefficients: 2, −5,−12.Each minus sign belongs to the term that follows it.
  5. Highest power 2: degree 2, leading term 2x2, leading coefficient 2.All three are read from the term with the highest power.
Answer
  • Expanded form: q(x) = 2x2 − 5x − 12
  • Terms: 2x2, −5x, −12
  • Coefficients: 2, −5, −12
  • Degree: 2
  • Leading term: 2x2
  • Leading coefficient: 2
Double-check Put x = 2 into both forms. Factored: (4 + 3)(2 − 4) = 7·(−2) = −14. Expanded: 8 − 10 − 12 = −14. They match. The shortcut agrees: leading term times leading term is 2x·x = 2x2.

Rung 6 of 9

A number and x in front of two brackets

Expand r(x) = −3x(x − 2)(x + 5) and name its terms, degree, leading term and leading coefficient. In plain words: multiply everything out into a sum, then name the pieces.

Show the steps and the answer
x²5xx−2x−10−2x+5
The two brackets give x2 + 3x − 10 before the −3x in front multiplies every term.
  1. Multiply the two brackets first: x·x=x2,x·5=5x,−2·x=−2x,−2·5=−10, so (x−2)(x+5)=x2+5x−2x−10.Every term in one bracket multiplies every term in the other.
  2. Combine like terms: 5x−2x=3x. The product is x2+3x−10.Both have x to the power 1, and 5 − 2 = 3.
  3. Multiply every term by −3x: −3x·x2=−3x3,−3x·3x=−9x2,−3x·(−10)=30x.The factor outside multiplies each term inside. Exponents add when powers of x are multiplied, and a negative times a negative is positive.
  4. r(x)=−3x3−9x2+30x. Terms: −3x3,−9x2, 30x. There is no constant term.Every term kept at least one x, so the coefficient of x0 is 0.
  5. Highest power 3: degree 3, leading term −3x3, leading coefficient −3.All three are read from the term with the highest power, sign included.
Answer
  • Expanded form: r(x) = −3x3 − 9x2 + 30x
  • Terms: −3x3, −9x2, 30x
  • Degree: 3
  • Leading term: −3x3
  • Leading coefficient: −3
Double-check Put x = 1 into both forms. Factored: −3·1·(1 − 2)·(1 + 5) = −3·(−1)·6 = 18. Expanded: −3 − 9 + 30 = 18. With x = 3: factored −9·1·8 = −72, expanded −81 − 81 + 90 = −72. The shortcut agrees: −3x·x·x = −3x3.

Rung 7 of 9

Degree and leading term of a long product, without expanding

Without multiplying everything out, find the degree, the leading term and the leading coefficient of u(x) = −4x2(x − 1)(3x + 2)(5 − x). In plain words: find only the piece with the highest power that the full expansion would have.

Show the steps and the answer
  1. List the four factors: −4x2, (x−1), (3x+2) and (5−x).The highest power of the product can only come from multiplying the highest power of every factor.
  2. Pick the leading term of each factor: −4x2, x, 3x and −x.In (5 − x) the highest power is on −x, not on the 5 written first. This is the gotcha.
  3. Multiply the coefficients: (−4)·(1)·(3)·(−1)=12.Numbers multiply numbers. Two negatives make a positive.
  4. Multiply the powers of x: x2·x·x·x=x5.Exponents add when powers are multiplied: 2 + 1 + 1 + 1 = 5.
  5. The leading term is 12x5, so the degree is 5 and the leading coefficient is 12.Every other product in the expansion uses at least one lower power, so it cannot reach x5 or cancel this term.
Answer
  • Degree: 5
  • Leading term: 12x5
  • Leading coefficient: 12
Double-check Second way, the long way: (x − 1)(3x + 2) = 3x2 − x − 2. Times (5 − x): −3x3 + 16x2 − 3x − 10. Times −4x2: 12x5 − 64x4 + 12x3 + 40x2. The first term is 12x5. With x = 2 the factored form gives −16·1·8·3 = −384 and the expanded form gives 384 − 1024 + 96 + 160 = −384.

Rung 8 of 9

Sort after simplifying

Sort A: (−2x⁴)3; B: 9x⁴; C: 13x2 − 7; D: 8x+3. Use Both, Power only, Polynomial only or Neither for each.

What it asks. Sort A: (−2x⁴)3; B: 9x⁴; C: 13x2 − 7; D: 8x+3. Use Both, Power only, Polynomial only or Neither for each.

Show the steps and the answer

The plan. Simplify first. Test the one-power rule and the polynomial rule separately.

  1. Plan. Simplify first. Test the one-power rule and the polynomial rule separately.
  2. Simplify first. Test the one-power rule and the polynomial rule separately.
  1. A=−8x12: Both.Cube the coefficient: (−2)3 = −8. Cubing x⁴ multiplies its exponent by 3: 4 · 3 = 12.
  2. B=9x−4: Power only, with x≠0.One fixed negative power is allowed for a power function, but not for a polynomial.
  3. C: Polynomial only.13 is a fixed real coefficient. The powers of x are 2 and 0.
  4. D: Neither.The exponent changes with x.
Answer
  • A: Both
  • B: Power only
  • C: Polynomial only
  • D: Neither
Double-check A at x = 1 gives (−2)3 = −8. B at x = 2 gives 9/16 from division and from the negative power. In C the root is on a number, not on x.

Rung 9 of 9

Roots, constants and a fraction

Sort A: 5x; B: 11; C: (x − 6)(x + 2); D: x2+8x2+3. Use Both, Power only, Polynomial only or Neither for each.

What it asks. Sort A: 5x; B: 11; C: (x − 6)(x + 2); D: x2+8x2+3. Use Both, Power only, Polynomial only or Neither for each.

Show the steps and the answer

The plan. Simplify first. Test the one-power rule and the polynomial rule separately.

  1. Plan. Simplify first. Test the one-power rule and the polynomial rule separately.
  2. Simplify first. Test the one-power rule and the polynomial rule separately.
  1. A=5x1/2: Power only, with x≥0.The exponent 1/2 means square root. It is fixed, but not a whole number.
  2. B: Both.A nonzero constant is a power function with exponent 0 and a polynomial of degree 0.
  3. C=x2−4x−12: Polynomial only.Multiplying out leaves three terms with whole-number powers.
  4. D: Neither. Rewrite it as 1+5x2+3.This extra fraction never vanishes. Its values approach 1 at both ends, while a nonconstant polynomial cannot do that. A single power approaching 1 at infinity would have exponent 0 and be constant.
Answer
  • A: Power only
  • B: Both
  • C: Polynomial only
  • D: Neither
Double-check A at x = 9 is 15. C at x = 0 is −12 in both forms. D at x = 0 is 8/3, and at x = 1 is 9/4, so it is not the constant 1 it approaches.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: For f(x) = 7 + 2x − 3x4: the leading term is 7 because it is written first.
Leading means highest power, not first on the page. The powers here are 0, 1 and 4, and this formula is not in standard form.
✓ Instead: The leading term is −3x4, the degree is 4 and the leading coefficient is −3. Standard form: −3x4 + 2x + 7.
✗ Not this: For f(x) = 2x5 + 9x2: the leading coefficient is 9 because 9 is the biggest number.
The leading coefficient belongs to the highest power, whatever its size. The size of a coefficient plays no part in choosing the leading term.
✓ Instead: The highest power is 5, so the leading term is 2x5 and the leading coefficient is 2.
✗ Not this: For f(x) = 3x3 − x2 + 4: the coefficient of x2 is 1, since no number is written.
No number written means one copy, but the minus sign in front belongs to this term. −x2 means −1·x2.
✓ Instead: The coefficient of x2 is −1.
✗ Not this: The degree of x3 + x2 is 5, because 3 + 2 = 5.
Exponents add only when powers are multiplied: x3·x2 = x5. Here the two terms are added, and adding terms never raises a power.
✓ Instead: The degree is 3, the larger of the two powers. Test with x = 2: x3 + x2 = 8 + 4 = 12, while x5 = 32.
✗ Not this: f(x) = (x + 2)(x − 5) has degree 1, because the highest power showing is x.
The degree is read from the expanded form. Multiplying the brackets multiplies x by x, which makes x2.
✓ Instead: (x + 2)(x − 5) = x2 − 5x + 2x − 10 = x2 − 3x − 10, so the degree is 2.
✗ Not this: g(x) = 3x2 + 2x is a polynomial of degree 2.
The piece 2x divides by x. That is not a number times a whole-number power of x, so the formula is not a polynomial and this vocabulary does not apply to it.
✓ Instead: Not a polynomial. Compare 3x2 + 25x, which is one: there the fraction is the coefficient and x is not in the bottom.

Tips and tricks

  • Memory device: top power, its term, its number. The top power is the degree, the term that carries it is the leading term, and the number on that term is the leading coefficient.
  • Before reading anything, circle each term together with the sign in front of it. The circles stop a minus sign from getting lost.
  • Fill in the invisible numbers: x means 1x1, −x means −1x1, and a plain 5 means 5x0.
  • Check any reordering or expansion by putting the same small number into the starting formula and into your result. The two outputs must match. x = 2 is a good choice because it tells the powers apart: 22 = 4 but 23 = 8.
  • Putting x = 1 into a polynomial adds up its coefficients, because 1 to any power is 1. For 2x3 + 5x2 + x + 7 that gives 2 + 5 + 1 + 7 = 15.
  • For a product of brackets, when only the degree and leading term are wanted, multiply the leading term of each factor: (2x + 3)(x − 4) leads with 2x·x = 2x2. Watch for a bracket written backwards, such as (5 − x), whose leading term is −x.
  • The small numbers below the letter a are name tags, not powers: a2 is the coefficient that goes with x2.
  • Coefficient starts with co, meaning together: it is the number that travels together with the power of x.

7 The trap

The most common mistake is to take the first term on the page as the leading term, or to take the biggest number as the leading coefficient. In 5 + 2x − 3x4 the leading term is −3x4, not 5, and the leading coefficient is −3, sign included. Always find the highest power first. The order on the page and the size of the numbers decide nothing.

Keep in mind

  • Exam skills: sort power functions, polynomials, both and neither; simplify powers before deciding.
  • Find degree and leading coefficient in a sum or a product, including repeated factors and factors written in reverse order.

Flash cards

Say the answer out loud, then flip.

In 7x − 2x3 + 4, which term is the leading term, and what is the degree?
  • The leading term is −2x3, because 3 is the highest power.
  • The degree is 3.
  • Like the tallest player in a team photo, the leading term is found by height, not by where it stands in the line.
What is the coefficient of each term in x⁴ − x + 6?
  • x⁴ has coefficient 1, because nothing written in front means 1.
  • −x has coefficient −1, because a lone minus sign means −1.
  • 6 is the constant term, with coefficient 6: it is 6 · x0, a plain number with power 0.
Why is the second term of 3x2 − 5x read as −5x and not 5x?
  • Subtracting is adding a negative, so 3x2 − 5x means 3x2 + (−5x).
  • The sign travels with the term that follows it.
  • The coefficient is −5, sign included.
Is 4x2 + 3x a polynomial?
  • No. Every power of x in a polynomial must be a whole number (0, 1, 2, 3, ...).
  • That rules out an x left in the bottom of a fraction, under a root, or in an exponent after simplifying.
  • Here x sits in the bottom of a fraction, and nothing cancels it.

Sources

  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

Lesson 4 of 6

End behavior of a polynomial comes from its leading term

Subject: MathematicsLeans on: Leading term, leading coefficient and degreeLeans on: Powers of negative numbersLeans on: Arrow notationLeans on: End behavior of a power functionLeans on: Dividing and multiplying powers of xLeans on: Multiplying two bracketsOpen this lesson
Leans on 1Comes back in 0

1 In plain words

The big picture. Predict a polynomial’s far-left and far-right directions without drawing the whole graph. The leading term controls both ends. Use the vocabulary from the previous lesson and the power-function end rules; next, find where the graph meets the axes.

Picture a footrace. One runner is slow but gets a huge head start. The other starts far behind but runs faster. Early in the race the head start is all you see. Wait long enough and the fast runner passes, and after that the gap only grows. A polynomial is a race between its terms. The leading term, the one with the highest power of x, is the fast runner. Close to x = 0 the other terms can be ahead. Far to the right or far to the left, the leading term is so much larger in size than the rest that it alone decides whether the graph heads up or down. The end behavior of a polynomial is the end behavior of its leading term.

2 Picture it

−1818−21600−108001080021600−24−121224−21600−108001080021600
Solid is y = x3 − 6x2 + 12x − 5, which is (x − 2)3 + 3 multiplied out, and dashed is its leading term y = x3.

Reminder

Reminder: Leading term, leading coefficient and degree, Powers of negative numbers, Arrow notation, End behavior of a power function, Dividing and multiplying powers of x, Multiplying two brackets
  • Leading term, leading coefficient and degree. The leading term is the term with the highest power of x. In 4 + 2x − 5x3 it is −5x3, so the leading coefficient is −5 and the degree is 3.
  • Powers of negative numbers. An even power of a negative number is positive and an odd power is negative: (−10)2 = 100, but (−10)3 = −1,000.
  • Arrow notation. The line as x → ∞, f(x) → −∞ is read: as x moves farther and farther right, the outputs drop lower and lower without stopping. The symbol x → −∞ means moving farther and farther left.
  • End behavior of a power function. For y = kxp, the sign of k gives the right arm, and an even p makes the left arm match while an odd p makes it opposite: y = −x2 has both arms down, y = x3 has left arm down and right arm up.
  • Dividing and multiplying powers of x. Count the factors of x. x3 ÷ x2 = x, because three x's over two x's leaves one. x3 · x2 = x5, because three x's times two x's is five. With numbers: 1,000 ÷ 100 = 10.
  • Multiplying two brackets. Multiply each term of the first bracket by each term of the second, then combine: (x − 3)(x + 4) = x2 + 4x − 3x − 12 = x2 + x − 12.

3 Why

Compare the sizes of two terms by dividing. Take f(x) = x3 − 10x2 − 100 and a positive x. The size of the leading term divided by the size of the next term is x3 ÷ 10x2 = x10. At x = 10 that is 1: the two terms are tied. At x = 1,000 it is 100: the leading term is 100 times as big. A higher power carries at least one more factor of x than a lower one, and x has no ceiling, so no fixed coefficient can keep up. Far out, the other terms are pocket change, and the total takes the leading term's sign.

4 The rule

If f(x)=anxn+ (terms with lower powers of x), where an≠0 is the leading coefficient and the degree n is 1 or more, then f has the same end behavior as the power function y=anxn.source 1

n even, an>0: as x→−∞,f(x)→∞, and as x→∞,f(x)→∞ (both arms up).
n even, an<0: as x→−∞,f(x)→−∞, and as x→∞,f(x)→−∞ (both arms down).
n odd, an>0: as x→−∞,f(x)→−∞, and as x→∞,f(x)→∞ (left arm down, right arm up).
n odd, an<0: as x→−∞,f(x)→∞, and as x→∞,f(x)→−∞ (left arm up, right arm down).

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

The same idea, five ways

Say it

Far from zero, a polynomial acts like its leading term.

Write it

The end behavior of a polynomial is the same as the end behavior of its leading term, so for degree 1 or more the degree and the leading coefficient tell where both arms of the graph point.

In math
  • f(x) = anxn + ... + a1x + a0, with an ≠ 0 and degree n ≥ 1
  • end behavior of f = end behavior of y = anxn
  • for n ≥ 1: as x → ∞, f(x) → ∞ or f(x) → −∞
  • for n ≥ 1: as x → −∞, f(x) → ∞ or f(x) → −∞
  • example: f(x) = −2x3 + 7x − 1 has as x → −∞, f(x) → ∞ and as x → ∞, f(x) → −∞
Like

A mountain seen from an airplane: the boulders and gullies vanish, and only the one big slope still shows.

See it

even degree (2, 4, ...), positive leading coefficient: up on the left, up on the right

even degree (2, 4, ...), negative leading coefficient: down on the left, down on the right

odd degree (1, 3, ...), positive leading coefficient: down on the left, up on the right

odd degree (1, 3, ...), negative leading coefficient: up on the left, down on the right

The same idea, other ways

As a picture

This picture shows the same two curves as the lesson's main picture, but up close. Solid is y = x3 − 6x2 + 12x − 5. Dashed is its leading term alone, y = x3. Up close they are clearly different: the smaller terms −6x2 + 12x − 5 have moved the solid curve. Now look at the main picture again, where the window is thousands of units tall. The difference has shrunk to almost nothing and both left arms go down and both right arms go up. Zooming out shrinks everything the smaller terms do. Only the leading term survives the zoom.

−2246−40−20204060
Up close, the solid polynomial and its dashed leading term y = x3 are two different curves.
As a story

A chain of shops earns x3 dollars and spends 10x2 + 100 dollars, where x is the number of shops. Its profit is x3 − 10x2 − 100. With 5 shops it earns 125 and spends 350, a loss of 225. With 10 shops it earns 1,000 and spends 1,100, a loss of 100. With 100 shops it earns 1,000,000 and spends 100,100, a profit of 899,900. The costs never went away. They grew too. But the earnings grew faster, and from then on the earnings decide the story. The costs change the amount a little. They never again change the direction.

With numbers

Read the table in this lesson one row at a time. At x = 1 the leading term is 1 and the rest is −110, so the rest wins and f(1) = −109. At x = 10 the rest still wins, barely: f(10) = −100. At x = 100 the leading term is 1,000,000 and the rest is only −100,100. At x = 1,000 the rest is about one hundredth of the leading term. The last column divides f(x) by x3. It closes in on 1, which says f(x) and x3 are becoming almost the same size. The row for x = −1,000 shows the same thing on the left side.

input xoutput f(x) ÷ x³1−10910−0.11000.899910000.9899999−10001.0100001
The bottom row closes in on 1 as x grows, and it is near 1 again at x = −1,000.
Why it must be true

For any x other than 0, pull the leading term out in front: x3 − 10x2 − 100 = x3 · (1 − 10x − 100x3). Multiply it back to see that nothing changed: x3 · 1 = x3, x3 · 10x = 10x2, and x3 · 100x3 = 100. Now let x grow. A fraction with a fixed top and a growing bottom shrinks toward 0, so the bracket is squeezed toward 1. At x = 1,000 the bracket is 1 − 0.01 − 0.0000001 = 0.9899999, the same number as in the table. So f(x) is x3 times a number close to 1. It has the sign of x3, and it is huge whenever x3 is huge.

As a rule of thumb

For a polynomial of degree 1 or more, two questions settle everything. First: what is the sign of the leading coefficient? That sign is the direction of the right arm, plus for up and minus for down. Second: is the degree even or odd? Even means the left arm copies the right arm. Odd means the left arm does the opposite. Say it as: even, twins. Odd, opposites.

Right arm: the sign of the leading coefficient

positive → right arm up

negative → right arm down

Left arm: look at the degree

even → same as the right arm

odd → opposite of the right arm

xleading term x3all the rest: −10x2 − 100f(x)=x3−10x2−100f(x)÷x3
11−110−109−109
101,000−1,100−100−0.1
1001,000,000−100,100899,900≈ 0.90
1,0001,000,000,000−10,000,100989,999,900≈ 0.99
10,0001,000,000,000,000−1,000,000,100998,999,999,900≈ 0.999
−1,000−1,000,000,000−10,000,100−1,010,000,100≈ 1.01

Part 1: Build a table for both ends

A table is a set of snapshots along a road. One nearby snapshot cannot show where the road goes. Choose inputs far from 0 on each side. Compute the whole formula, then compare those outputs with the leading term. The table checks your arithmetic and supports the rule; finitely many samples do not prove what happens forever.

  • Method: choose two negative inputs and two positive inputs, with larger distances from 0. Substitute into every term or factor.
  • Read the left end by moving toward more negative inputs. Read the right end by moving toward more positive inputs.
  • Why: dividing lower powers by the leading power produces fractions that shrink toward 0. This proves the end behavior beyond any finite table.
  • If nearby outputs disagree with the leading term, choose farther inputs. Do not change the leading-term prediction to match a small window.
input xoutput f(x)−1219728−414441441219728
x:−12,−4,4,12;f(x):19728,144,144,19728.

Worked example

A table on both sides

For f(x) = x⁴ − 7x2, make a table at x = −12, −4, 4, 12. Use the table and the leading term to describe both ends.

What it asks. For f(x) = x⁴ − 7x2, make a table at x = −12, −4, 4, 12. Use the table and the leading term to describe both ends.

Show the steps and the answer

The plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.

input xoutput f(x)−1219728−414441441219728
The same picture again: x: −12, −4, 4, 12; f(x): 19728, 144, 144, 19728.
  1. Plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
  2. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
  1. At x = 4: f(4)=256−112=144.Powers come first: 42 = 16 and 4⁴ = 256.
  2. At x = 12: f(12)=20,736−1,008=19,728.122 = 144, then square 144 to get 20,736.
  3. f(−4)=144 and f(−12)=19,728.Only even powers occur, so opposite inputs give equal outputs.
  4. Both ends rise: as x→−∞,f(x)→∞; as x→∞,f(x)→∞.The leading term x⁴ has even degree and positive coefficient. It decides the trend beyond the table.
Answer
  • As x → −∞, f(x) → ∞.
  • As x → ∞, f(x) → ∞.
Double-check Factor to check the arithmetic: x2(x2 − 7). At ±4: 16 · 9 = 144. At ±12: 144 · 137 = 19,728.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Positive outputs at two small inputs prove the right end rises.
A lower power with a large coefficient can dominate those inputs.
✓ Instead: Use the leading term for the conclusion and farther inputs for support.
Tips and tricks
  • For an exam, practice this method with the answer folded. Check each step against the reason beside it.

5 How

  1. For f(x) = 50x2 − x3 + 100, use the degree rule to find the highest power, 3. The leading term is −x3 and its coefficient is −1, even though it is written in the middle.
  2. Apply the leading-term rule for end behavior. Use −x3 to predict the two ends, because the lower-power terms become small compared with it far enough from zero. Keep those terms when calculating actual outputs.
  3. Apply the power-function rules to −x3. The negative coefficient sends the right end down: as x → ∞, f(x) → −∞. The odd degree makes the left end opposite: as x → −∞, f(x) → ∞.
  4. Check by substituting into the whole polynomial: f(100) = 500,000 − 1,000,000 + 100 = −499,900, and f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100. The signs match the predicted ends. Here the leading term outweighs the other terms together; f(10) = 4,100 shows why a small input can mislead.

Finding the end behavior of a polynomial

1
Is the polynomial written as a product of brackets?
YesMultiply the highest-power piece of each bracket. That product is the leading term.
NoGo on. If the polynomial is a constant c, both ends stay at height c, so stop here.
↓
2
Is the term with the highest power written first?
YesThat first term is the leading term.
NoSearch every term for the highest power. That term is the leading term, wherever it sits.
↓
3
Is the leading coefficient positive?
YesRight arm up: as x → ∞, f(x) → ∞.
NoRight arm down: as x → ∞, f(x) → −∞.
↓
4
Is the degree even?
YesThe left arm does the same as the right arm.
NoThe degree is odd, so the left arm does the opposite of the right arm.
  1. Say what is asked: where does the graph go far to the right (x → ∞) and far to the left (x → −∞)?
  2. Find the leading term, the term with the highest power of x. If the polynomial is a product of brackets, multiply the highest-power piece of each bracket to get it.
  3. Read the leading coefficient, including a hidden 1 or −1, and read the degree. If the degree is 0, the polynomial is a constant c and both ends stay at height c: stop there.
  4. Sign of the leading coefficient gives the right arm: positive up, negative down.
  5. Even degree: the left arm matches the right arm. Odd degree: the left arm is the opposite.
  6. Write the two arrow statements.
  7. Check by putting 100 and −100 (or 10 and −10 when the coefficients are small) into the whole polynomial and looking at the signs; they agree with the arms wherever the leading term outweighs all the other terms together.

6 Worked example

Worked example

A leading term hiding in the middle

Find the end behavior of f(x) = 50x2 − x3 + 100. In plain words: say where the graph goes far to the right and far to the left.

input xoutput f(x)−1001500100−106100104100100−499900
x:−100,−10,10,100;f(x):1500100,6100,4100,−499900.
Show the steps and the answer
input xoutput f(x)−1001500100−106100104100100−499900↓ evaluate: input given, read the output below it
The outputs under −100 and 100 have the signs the leading term −x3 predicts.
  1. Restate the question. As x→∞ (far right), does f(x) go to ∞ or to −∞? Then answer the same for x→−∞ (far left).End behavior is only about the two arms of the graph. It says nothing about the middle.
  2. List each term with its power of x: 50x2 has power 2, −x3 has power 3, and 100 has no x at all.The leading term is the term with the highest power, so every power has to be in view before choosing.
  3. Choose the leading term: −x3. The degree is 3 and the leading coefficient is −1.3 is the highest power present. A bare minus sign in front of x3 means the coefficient is −1.
  4. Set 50x2 and 100 aside for this question.Dividing shows who is bigger: 50x2 ÷ x3 = 50x. Once x passes 50 this is less than 1, and it keeps shrinking, so far out 50x2 is small beside x3. The 100 never grows at all.
  5. Right arm: the leading coefficient −1 is negative, so as x→∞,f(x)→−∞.A large positive number cubed is a large positive number, and multiplying by −1 makes it a large negative: −(1003) = −1,000,000.
  6. Left arm: the degree 3 is odd, so the left arm does the opposite of the right arm. As x→−∞,f(x)→∞.A negative number cubed stays negative, and −1 times a negative is positive: −(−100)3 = −(−1,000,000) = 1,000,000.
Answer
  • As x → −∞, f(x) → ∞ (left arm up).
  • As x → ∞, f(x) → −∞ (right arm down).
Double-check Second way: put large inputs into the whole formula, as in the table. Under 100: f(100) = 50 · 10,000 − 1,000,000 + 100 = −499,900, a large negative, so the right arm is heading down. Under −100: f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100, a large positive, so the left arm is heading up. Both agree with the answer. Now look at the column under 10: f(10) = 5,000 − 1,000 + 100 = 4,100, which is positive. Close to 0 the term 50x2 is still ahead, so a small test input would have pointed the right arm the wrong way.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 10

Leading term first, everything positive in front

Find the end behavior of f(x) = 3x2 + 5x − 7. In plain words: where do the two arms of the graph point?

Show the steps and the answer
  1. Find the leading term: 3x2.The powers of x are 2, 1 and 0. The highest is 2.
  2. Read it: leading coefficient 3 (positive), degree 2 (even).These two facts are all that end behavior needs.
  3. Right arm up: as x→∞,f(x)→∞.The leading coefficient is positive, and a large number squared times 3 is large and positive.
  4. Left arm up as well: as x→−∞,f(x)→∞.The degree is even, and an even power of a negative number is positive, so the left arm copies the right arm.
Answer
  • As x → −∞, f(x) → ∞.
  • As x → ∞, f(x) → ∞.
  • Both arms point up.
Double-check Use the whole polynomial. f(100) = 3 · 10,000 + 500 − 7 = 30,493. f(−100) = 30,000 − 500 − 7 = 29,493. Both are large and positive, which agrees with both arms heading up.

Rung 2 of 10

Odd degree, positive leading coefficient

Find the end behavior of g(x) = 2x5 − 9x4 + x − 6.

Show the steps and the answer
  1. Find the leading term: 2x5.The powers are 5, 4, 1 and 0. The highest is 5. The coefficient −9 is larger in size than 2, but its power is lower, so it is not the leading term.
  2. Read it: leading coefficient 2 (positive), degree 5 (odd).Sign and even-or-odd are the two facts needed.
  3. Right arm up: as x→∞,g(x)→∞.The leading coefficient is positive.
  4. Left arm down: as x→−∞,g(x)→−∞.The degree is odd, and an odd power of a negative number is negative, so the left arm does the opposite of the right arm.
Answer
  • As x → −∞, g(x) → −∞.
  • As x → ∞, g(x) → ∞.
  • Left arm down, right arm up.
Double-check g(10) = 2 · 100,000 − 9 · 10,000 + 10 − 6 = 200,000 − 90,000 + 4 = 110,004, positive. g(−10) = −200,000 − 90,000 − 10 − 6 = −290,016, negative. The signs match the arrows.

Rung 3 of 10

The leading term is written last, with a hidden coefficient

Find the end behavior of h(x) = 8x + 12x3 − x4.

Show the steps and the answer
  1. List the powers: 8x has power 1, 12x3 has power 3, −x4 has power 4.The terms are written from lowest power to highest, so the first term is not the leading term.
  2. Leading term: −x4. Leading coefficient −1, degree 4.4 is the highest power, and a bare minus sign means −1.
  3. Right arm down: as x→∞,h(x)→−∞.The leading coefficient is negative.
  4. Left arm down: as x→−∞,h(x)→−∞.The degree is even, so the left arm copies the right arm.
Answer
  • As x → −∞, h(x) → −∞.
  • As x → ∞, h(x) → −∞.
  • Both arms point down.
Double-check h(100) = 800 + 12 · 1,000,000 − 100,000,000 = −87,999,200. h(−100) = −800 − 12,000,000 − 100,000,000 = −112,000,800. Both are large and negative. Gotcha: h(10) = 80 + 12,000 − 10,000 = 2,080 is positive, because at x = 10 the term 12x3 is still ahead of x4.

Rung 4 of 10

A large coefficient delays the leading term but cannot stop it

Find the end behavior of p(x) = x4 − 100x3 + 5. Then say roughly how far out the leading term takes over on the right side.

Show the steps and the answer
input xoutput p(x)−1011000510−8999510051000900000000005↓ evaluate: input given, read the output below it
The output is negative under 10, nearly zero under 100, and enormous under 1,000.
  1. Leading term: x4. Leading coefficient 1 (positive), degree 4 (even).4 is the highest power. The coefficient 100 belongs to a lower power.
  2. Both arms up: as x→−∞,p(x)→∞, and as x→∞,p(x)→∞.Positive leading coefficient sends the right arm up, and even degree makes the left arm copy it.
  3. Compare the top two terms by dividing: x4÷(100x3)=x100.This fraction tells how many times bigger the leading term is than the next term.
  4. x100 is more than 1 when x > 100, so the leading term is ahead once x passes 100.Before 100 the term 100x3 is the bigger one. At 100 they tie. After 100 the leading term wins by more and more.
Answer
  • As x → −∞, p(x) → ∞.
  • As x → ∞, p(x) → ∞.
  • Both arms point up. On the right side the leading term takes over once x passes 100.
Double-check Read the table. Under 10: p(10) = 10,000 − 100,000 + 5 = −89,995, still negative. Under 100: p(100) = 100,000,000 − 100,000,000 + 5 = 5, the tie. Under 1,000: p(1,000) = 1,000,000,000,000 − 100,000,000,000 + 5 = 900,000,000,005, large and positive. Under −10: p(−10) = 10,000 + 100,000 + 5 = 110,005, positive. Far out on both sides the outputs are positive, as the leading term said.

Rung 5 of 10

A product of brackets, multiplied out in full

Find the end behavior of q(x) = −2x(x − 3)(x + 4).

Show the steps and the answer
x²4xx−3x−12−3x+4
The four products of (x − 3)(x + 4): only the top-left cell, x times x, makes the highest power.
  1. Multiply the two brackets: (x−3)(x+4)=x2+4x−3x−12=x2+x−12.Multiplying out puts every term in view, which makes the leading term easy to read. The area picture shows the four products.
  2. Multiply by −2x: −2x·x2=−2x3,−2x·x=−2x2, and −2x·(−12)=24x. So q(x)=−2x3−2x2+24x.−2x multiplies every term inside, and a negative times a negative gives the positive 24x.
  3. Leading term: −2x3. Leading coefficient −2 (negative), degree 3 (odd).3 is the highest power in the multiplied-out form.
  4. Right arm down: as x→∞,q(x)→−∞. Left arm up: as x→−∞,q(x)→∞.Negative leading coefficient sends the right arm down, and odd degree makes the left arm do the opposite.
Answer
  • As x → −∞, q(x) → ∞.
  • As x → ∞, q(x) → −∞.
  • Left arm up, right arm down.
Double-check Use the original bracket form, which never passed through the expansion. q(10) = −20 · 7 · 14 = −1,960, negative. q(−10) = 20 · (−13) · (−6) = 20 · 78 = 1,560, positive. The expanded form agrees: −2,000 − 200 + 240 = −1,960 and 2,000 − 200 − 240 = 1,560.

Rung 6 of 10

A product of brackets, using the shortcut

Find the end behavior of k(x) = (5 − x2)(3x2 + 1) without multiplying everything out.

Show the steps and the answer
  1. Pick the highest-power piece in each bracket: −x2 in the first, 3x2 in the second.When two brackets are multiplied, the highest power in the result can only come from the highest power in each bracket. Every other product has fewer factors of x.
  2. Multiply those two pieces: (−x2)(3x2)=−3x4. This is the leading term.−1 · 3 = −3, and x2 · x2 is four factors of x, which is x4.
  3. Read it: leading coefficient −3 (negative), degree 4 (even).The numbers 5 and 3 that catch the eye first are both positive, but the leading coefficient is negative.
  4. Both arms down: as x→−∞,k(x)→−∞, and as x→∞,k(x)→−∞.Negative leading coefficient sends the right arm down, and even degree makes the left arm copy it.
Answer
  • As x → −∞, k(x) → −∞.
  • As x → ∞, k(x) → −∞.
  • Both arms point down.
Double-check Multiply everything out as a second way: 5 · 3x2 + 5 · 1 − x2 · 3x2 − x2 · 1 = 15x2 + 5 − 3x4 − x2 = −3x4 + 14x2 + 5. The leading term is −3x4, the same as the shortcut gave. With numbers: k(10) = (5 − 100)(300 + 1) = (−95)(301) = −28,595, and k(−10) is the same because every power of x here is even. Both are negative.

Rung 7 of 10

Working backward from one arm

A polynomial has degree 6. Far to the right its graph goes down. What is the sign of its leading coefficient, and where does the graph go far to the left?

Show the steps and the answer
  1. Restate what is known: the degree is 6, and as x→∞,f(x)→−∞.The question gives the degree and one arm, and asks for the other two facts.
  2. The leading coefficient is negative.The right arm follows the sign of the leading coefficient. For a large positive x, x6 is positive, so the leading term can only be negative if its coefficient is negative.
  3. The left arm also goes down: as x→−∞,f(x)→−∞.6 is even, and an even power of a negative number is positive, so the leading term has the same sign on the left as on the right.
Answer
  • The leading coefficient is negative.
  • As x → −∞, f(x) → −∞ (the left arm points down too).
Double-check Test the simplest polynomial that fits, y = −x6. At x = 2 it gives −64 and at x = −2 it gives −64: both down. Try the other sign, y = x6: at x = 2 it gives 64, which goes up on the right and contradicts what was given. So a negative leading coefficient is the only choice.

Rung 8 of 10

Brackets raised to powers

Find the end behavior of f(x) = (2 − x)3(x + 1)2.

Show the steps and the answer
  1. Highest-power piece of (2−x)3: the piece with x inside the bracket is −x, and (−x)3=−x3.Cubing means three copies of the bracket multiplied together. The highest power comes from taking −x out of each copy: (−x)(−x)(−x) = −x3, negative because three minus signs are multiplied.
  2. Highest-power piece of (x + 1)2: x·x=x2.Two copies of the bracket, taking x from each.
  3. Multiply the pieces: (−x3)(x2)=−x5. This is the leading term.Three factors of x times two factors of x is five factors of x.
  4. Read it: leading coefficient −1 (negative), degree 5 (odd).The degree is the sum of the bracket powers, 3 + 2 = 5.
  5. Right arm down: as x→∞,f(x)→−∞. Left arm up: as x→−∞,f(x)→∞.Negative leading coefficient sends the right arm down, and odd degree makes the left arm do the opposite.
Answer
  • As x → −∞, f(x) → ∞.
  • As x → ∞, f(x) → −∞.
  • Left arm up, right arm down.
Double-check Put numbers into the original form. f(10) = (2 − 10)3(10 + 1)2 = (−8)3 · 112 = −512 · 121 = −61,952, negative. f(−10) = (2 + 10)3(−10 + 1)2 = 123 · (−9)2 = 1,728 · 81 = 139,968, positive. The signs match the arrows.

Rung 9 of 10

Make an even-degree table

For f(x) = 2x⁴ − 18x2, make a table at x = −10, −4, 4, 10. Use the table and the leading term to describe both ends.

What it asks. For f(x) = 2x⁴ − 18x2, make a table at x = −10, −4, 4, 10. Use the table and the leading term to describe both ends.

Show the steps and the answer

The plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.

input xoutput f(x)−1018200−422442241018200
x:−10,−4,4,10;f(x):18200,224,224,18200.
  1. Plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
  2. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
  1. f(4)=2·256−18·16=512−288=224.Apply both coefficients after evaluating the powers.
  2. f(10)=20,000−1,800=18,200.10⁴ = 10,000 and 102 = 100.
  3. The negative inputs give the same values.Both exponents are even.
  4. As x→−∞,f(x)→∞; as x→∞,f(x)→∞.The leading term 2x⁴ sends both ends up.
Answer
  • As x → −∞, f(x) → ∞.
  • As x → ∞, f(x) → ∞.
Double-check Use 2x2(x2 − 9): at ±4 it is 32 · 7 = 224; at ±10 it is 200 · 91 = 18,200. Both forms agree.

Rung 10 of 10

Make a table from factors

For f(x) = (x + 4)(x − 6)(1 − x), make a table at x = −20, −10, 10, 20. Use the table and the leading term to describe both ends.

What it asks. For f(x) = (x + 4)(x − 6)(1 − x), make a table at x = −20, −10, 10, 20. Use the table and the leading term to describe both ends.

Show the steps and the answer

The plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.

input xoutput f(x)−208736−10105610−50420−6384
x:−20,−10,10,20;f(x):8736,1056,−504,−6384.
  1. Plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
  2. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
  1. f(−20)=(−16)(−26)(21)=8736. f(−10)=(−6)(−16)(11)=1056.Substitute into each bracket, then multiply. Two negative factors give a positive product.
  2. f(10)=(14)(4)(−9)=−504. f(20)=(24)(14)(−19)=−6384.One negative factor gives a negative product.
  3. The leading term is x·x·(−x)=−x3.The highest power comes from the variable part of every bracket.
  4. As x→−∞,f(x)→∞; as x→∞,f(x)→−∞.Odd degree makes the ends opposite; the negative leading coefficient puts the right end down.
Answer
  • As x → −∞, f(x) → ∞.
  • As x → ∞, f(x) → −∞.
Double-check Expansion gives −x3 + 3x2 + 22x − 24. At x = 10: −1000 + 300 + 220 − 24 = −504. At x = −20: 8000 + 1200 − 440 − 24 = 8736. At x = −10: 1000 + 300 − 220 − 24 = 1056, also (−6)(−16)(11) = 96 · 11 = 1056.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: For f(x) = 6 + 2x − x4: the first term is 6, which is positive, so both arms go up.
The leading term is the term with the highest power, not the term written first. Here the highest power is 4, and its term is −x4.
✓ Instead: Leading term −x4: even degree, negative leading coefficient, so both arms go down. Numbers agree: f(10) = 6 + 20 − 10,000 = −9,974 and f(−10) = 6 − 20 − 10,000 = −10,014.
✗ Not this: For f(x) = x3 − 900x2: the coefficient 900 is far bigger than 1, so −900x2 controls the ends and both arms go down.
A coefficient is a fixed number. A higher power keeps gaining: x3 ÷ (900x2) = x900, which passes 1 once x > 900 and never stops growing. Size of coefficient delays the leading term. It does not replace it.
✓ Instead: Leading term x3: left arm down, right arm up. f(100) = 1,000,000 − 9,000,000 = −8,000,000 is misleading, but f(1,000) = 1,000,000,000 − 900,000,000 = 100,000,000 is positive, and f(−1,000) = −1,000,000,000 − 900,000,000 = −1,900,000,000 is negative.
✗ Not this: Since f(x) = x3 − 10x2 − 100 acts like x3, f(2) is about 23 = 8.
The leading term wins only far from 0. Near 0 the other terms can be larger. The true value is f(2) = 8 − 40 − 100 = −132, which does not even have the same sign.
✓ Instead: Use the leading term for the direction of the arms and nothing else. For an actual output, put the input into every term.
✗ Not this: For f(x) = 50x2 − x3 + 100: I tried x = 10 and got 4,100, a positive number, so the right arm goes up.
10 is not far enough out. At x = 10 the term 50x2 = 5,000 is still larger than x3 = 1,000.
✓ Instead: Decide from the leading term −x3: the right arm goes down. If you test with a number, go far past the point where the top two terms tie (here x = 50): f(100) = −499,900.
✗ Not this: For f(x) = −x2 + 1,000,000: the million is so large that it holds the graph up, so the arms go up.
A constant term does not grow. However large it is, x2 passes it: at x = 1,000 they tie, and after that x2 is bigger.
✓ Instead: Leading term −x2: both arms go down. f(10,000) = −100,000,000 + 1,000,000 = −99,000,000.

Tips and tricks

  • Memory cue: the right arm follows the sign of the leading coefficient. Then even, twins (the left arm copies it). Odd, opposites (the left arm does the reverse).
  • Fast check on the leading term alone: put in 10 and −10. For −2x3 that gives −2,000 and 2,000, so right arm down, left arm up.
  • Safer check when coefficients are big: go farther out, to 1,000 and −1,000 or beyond. A small input can sit in the zone where lower terms are still ahead; the leading term decides only where it outweighs all of them together.
  • To compare the leading term with the next term, divide one by the other. For x4 and 100x3 the result is x100, so x4 outweighs 100x3 once x > 100. With more terms, the leading term is in charge only where it outweighs all the others added together.
  • A bare xn has leading coefficient 1, and a bare −xn has leading coefficient −1. Write the 1 in if it helps you see the sign.
  • For a polynomial of degree 1 or more, the constant term never changes where the arms point. It only slides the whole graph up or down by a fixed amount.
  • The leading term tells you about the two arms only. What the graph does in the middle depends on all the terms.

7 The trap

Taking the first term on the page as the leading term. In f(x) = 6 + 2x − x4 the first term is 6, but the leading term is −x4, the one with the highest power. Before reading any sign, scan every term for its power of x and circle the highest one. Then read the sign directly in front of that term, including a bare minus sign, which means −1.

Keep in mind

  • Exam skills: read both ends from the leading term, even when factors or term order hide it.
  • Build a two-sided table of the whole formula and explain why it supports the prediction.

Flash cards

Say the answer out loud, then flip.

Which one term of a polynomial decides its end behavior, and why?
The leading term, the term with the highest power of x. It is the fast runner in a footrace: far to the right or far to the left it is so much larger in size than the other terms that it alone decides whether the graph heads up or down.
What does the sign of the leading coefficient tell you, and what does the degree tell you?
  • For a polynomial of degree 1 or more, the sign gives the right arm. Positive: the right arm goes up. Negative: the right arm goes down.
  • The degree gives the left arm. Even: the left arm does the same as the right arm. Odd: the left arm does the opposite.
  • A constant f(x) = c has both ends level at height c.
Find the end behavior of f(x) = 5 + 3x2 − 2x3.
  • The leading term is −2x3, the term with the highest power, not the 5 written first.
  • The leading coefficient is −2, which is negative, so the right arm goes down.
  • The degree is 3, which is odd, so the left arm does the opposite and goes up.
  • As x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞.
How do you check your end behavior arrows with numbers?
  • Put one large positive input and one large negative input into the whole polynomial, far enough out that the leading term outweighs all the other terms together; 100 and −100 do for this one. The signs of the two outputs then show where the arms point.
  • For f(x) = 5 + 3x2 − 2x3: at x = 100 the leading term is −2,000,000 and the rest is only 30,005. f(100) = −1,969,995, which is negative, so the right arm goes down. f(−100) = 2,030,005, which is positive, so the left arm goes up.

Sources

  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

From earlier

End behavior of a power function

What does the end behavior of a function tell you?
Show answer
It is the view from a long way off, like a person so distant that you only see where the two arms point. It says what the outputs do when x is very far to the right, and what they do when x is very far to the left.

End behavior of a power function

For a power function f(x) = kxp with p = 1, 2, 3, ..., which fact sets the right arm and which sets the left arm?
Show answer
Right arm: the sign of k. Positive k points it up, negative k points it down.
Left arm: the power p. Even p makes it match the right arm. Odd p makes it point the opposite way.

Lesson 5 of 6

Intercepts of a polynomial

Subject: MathematicsLeans on: Reading an intercept from a formulaLeans on: Solving a small equationLeans on: Multiplying two bracketsLeans on: Signs when multiplyingLeans on: Powers of negative numbersLeans on: Zero times anythingLeans on: DegreeOpen this lesson
Leans on 0Comes back in 0

1 In plain words

The big picture. Find where a polynomial graph meets each axis. Set the input to zero for the y-intercept and the output to zero for x-intercepts. Add these points to the end behavior you already know; next, use turns to narrow the possible degree.

Picture a hiking trail drawn on graph paper. The x-axis is sea level. The y-axis is a signpost standing at the start, where x is 0. The y-intercept is the spot where the trail passes the signpost, and you find its height by putting 0 in for x. The x-intercepts are the spots where the trail touches sea level, so the height there is 0. Finding them means solving f(x) = 0, which is harder, because x sits inside powers. The way in is factoring: rewriting the polynomial as pieces multiplied together. Each piece is called a factor. A product can be 0 only when one of its factors is 0, so each factor hands you one small equation you can solve.

2 Picture it

(−1, 0)(3, 0)(0, −3)−224−4−2246(−1, 0)(3, 0)(0, −3)−3−2−112345−4−2246
The graph of f(x) = x2 − 2x − 3 = (x + 1)(x − 3) meets the x-axis at −1 and 3 and passes the y-axis at −3.

Reminder

Reminder: Reading an intercept from a formula, Solving a small equation, Multiplying two brackets, Signs when multiplying, Powers of negative numbers, Zero times anything, Degree
  • Reading an intercept from a formula. Set x = 0 for the y-intercept and set the output to 0 for the x-intercepts. For y = 2x − 6: x = 0 gives y = −6, and y = 0 gives x = 3.
  • Solving a small equation. Undo what is done to x, the same on both sides. x + 3 = 0 becomes x = −3. For 2x − 3 = 0, add 3 to get 2x = 3, then divide by 2 to get x = 32.
  • Multiplying two brackets. Each term in the first bracket multiplies each term in the second: (x + 2)(x + 5) = x2 + 5x + 2x + 10 = x2 + 7x + 10.
  • Signs when multiplying. Two negatives multiply to a positive, and a negative times a positive is negative: (−4)(−5) = 20 and 3 · (−5) = −15.
  • Powers of negative numbers. An even power of a negative is positive and an odd power is negative: (−3)2 = 9 and (−2)3 = −8.
  • Zero times anything. Any number times 0 is 0, and every power 0n with n of 1 or more is 0: 0 · 57 = 0 and 03 = 0.
  • Degree. The degree of a polynomial is its highest power of x. For x3 + 2x2 − 8x the degree is 3.

3 Why

Every point on the y-axis has x = 0, so the graph can meet that axis only at (0, f(0)). Every point on the x-axis has y = 0, so the graph meets that axis only where f(x) = 0. Factoring works because of a fact about zero: two numbers that are both not zero never multiply to zero. So when a product is 0, at least one factor must be 0. No other number behaves this way. A product of 6 could be 1 · 6, 2 · 3 or many other pairs, so it fixes neither factor's value; it tells you only that neither factor is 0.

4 The rule

y-intercept: the point (0, f(0)).

When the polynomial is written term by term, f(0) is the constant term, the term with no x. x-intercepts: the points (c, 0) for every real number c with f(c)=0. Zero product property: if A·B=0, then A=0 or B=0.

The same idea, five ways

Say it

f has x-intercepts at negative 2 and 2, and its y-intercept is negative 4.

Write it

The graph of f(x) = x2 − 4 meets the x-axis where x is −2 and where x is 2, and it crosses the y-axis at a height of −4.

In math
  • f(0)=−4
  • f(x) = 0 when x = −2 or x = 2
  • y-intercept: (0, −4)
  • x-intercepts: (−2, 0) and (2, 0)
  • x2−4=(x−2)(x+2)
Like

On a trail map, the y-intercept is the height at the starting signpost, and the x-intercepts are the places where the trail touches sea level.

See it
(−2, 0)(2, 0)(0, −4)−4−224−4−2246
For f(x) = x2 − 4, the two points on the x-axis have y = 0 and the one point on the y-axis has x = 0.

The same idea, other ways

As a picture

Put a finger on the y-axis and slide it up or down until it touches the curve. There is one meeting point, and that is the y-intercept. Now slide a finger along the x-axis from left to right. Every place it touches the curve is an x-intercept. For f(x) = x2 − 6x + 5 the finger on the y-axis stops at height 5, and the finger on the x-axis stops twice, at 1 and at 5. The formula agrees: f(0) = 5, and x2 − 6x + 5 = (x − 1)(x − 5).

(1, 0)(5, 0)(0, 5)246−4−2246
The graph of f(x) = x2 − 6x + 5 has one point on the y-axis and two points on the x-axis.
As a story

A scoreboard shows two dials multiplied together. Tonight the board reads 0. You cannot see the dials, but you know one of them is set to 0, because any two settings that are not 0 multiply to something that is not 0. Tomorrow the board reads 12. Now you know almost nothing: the dials could be 3 and 4, or 2 and 6, or 1 and 12. That is why, to solve with factors, you first move everything to one side so the other side reads 0. Zero is the only reading that names a value some dial must hold.

With small numbers

Take f(x) = (x − 1)(x − 4) and try the inputs 0 through 5. In the table, the output row reads 4, 0, −2, −2, 0, 4. The two 0s sit under the inputs 1 and 4. Those are exactly the inputs that make one bracket 0: at x = 1 the product is 0 · (−3), and at x = 4 it is 3 · 0. At every other input both brackets are nonzero, so the product is nonzero. The column for x = 0 holds 4, which is the y-intercept: (−1)(−4) = 4.

input xoutput f(x)04102−23−24054↑ solve: output given, read every input above it
The output is 0 only under x = 1 and x = 4, the two inputs that make a bracket of (x − 1)(x − 4) equal 0.
As a rule of thumb

For the y-intercept, cover every term that has an x. What is left, the constant term, is the height. For the x-intercepts, read each bracket and flip the sign: (x − 5) gives 5, and (x + 3) gives −3. The flip works only when the bracket is x plus or minus a number. When a number multiplies x, as in (2x − 3), do not guess. Solve 2x − 3 = 0 to get x = 32.

Questiony-interceptx-intercepts
What is set to 0the input: x = 0the output: f(x) = 0
What you doput 0 in for x and computefactor, set each factor to 0, and keep the real solutions
How many there areexactly onefor a polynomial other than 0: none, one, or several, never more than its degree; for the zero polynomial, every x
How it is written(0, f(0))(c, 0)
Shortcutthe constant termeach real value that makes a factor 0, a lone x out front included

Part 1: The y-intercept: put in 0

The y-intercept answers one question: what does the polynomial give when x is 0? Think of a vending machine. You press the button marked 0 and read what drops out. No solving is needed, only arithmetic.

  • Formula: the y-intercept is the point (0, f(0)).
  • Written term by term: f(0) is the constant term, the term with no x, because every other term has an x and turns into 0.
  • No constant term showing: the constant is 0, so the graph passes through (0, 0).
  • Factored form: put 0 in every bracket and multiply. For 2(x + 3)(x − 5) that is 2 · 3 · (−5) = −30.
  • How many: exactly one, because 0 is always an allowed input for a polynomial and each input has one output.
04x³ − 7x² + x − 9inputoutput−9
The input 0 wipes out every term that has an x, so only the constant term −9 comes out.

Worked example

A y-intercept from a formula written term by term

Find the y-intercept of g(x) = 4x3 − 7x2 + x − 9.

Show the steps and the answer
  1. Say what is asked: the input is 0, find the output.The y-intercept is the point of the graph on the y-axis, and there x = 0.
  2. Replace every x with 0: g(0)=4(0)3−7(0)2+0−9.Putting in 0 means every x in the formula becomes 0.
  3. Compute each term: 4·0=0,7·0=0, and 0 stays 0. So g(0)=0−0+0−9=−9.Every power 0n with n of 1 or more is 0, and any number times 0 is 0.
  4. Write the point: (0,−9).The first coordinate is the input 0 and the second is the output −9.
Answer
The y-intercept is (0, −9).
Double-check Second way: look for the term with no x. It is −9, the constant term, and it matches the computed value.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The y-intercept of g(x) = 4x3 − 7x2 + x − 9 is 4, the first number in the formula.
4 is the leading coefficient. It multiplies x3, and when x = 0 that whole term is 0.
✓ Instead: The y-intercept comes from the constant term: (0, −9).

Part 2: Already factored: read each bracket

When the polynomial already comes as brackets multiplied together, most of the work is done. Think of a string of lights wired so that one dead bulb turns the whole string dark. Each bracket is a bulb. Find the x that makes one bracket 0, and the whole product is 0.

  • Rule: if A · B · C = 0, then A = 0 or B = 0 or C = 0.
  • A bracket (x − c) gives the x-intercept c. A bracket (x + c) gives −c.
  • A bracket with a number on x, such as (2x − 3), needs its small equation solved: 2x − 3 = 0, so 2x = 3, so x = 32.
  • A number out front other than 0, such as the 2 in 2(x + 3)(x − 5), gives no intercept.

h(x)=(x−4)(x+1)(2x−3)

x − 4 = 0 gives x = 4

x + 1 = 0 gives x = −1

2x − 3 = 0 gives x = 32

Worked example

Three brackets, three x-intercepts

Find the x-intercepts of h(x) = (x − 4)(x + 1)(2x − 3).

Show the steps and the answer
  1. Say what is asked: the output is 0, find every input that gives it. Write (x−4)(x+1)(2x−3)=0.The graph meets the x-axis only where the output is 0.
  2. Set the first bracket to 0: x−4=0. Add 4 to both sides: x=4.If this bracket is 0, the whole product is 0. This finds the one input that makes this bracket 0.
  3. Set the second bracket to 0: x+1=0. Subtract 1 from both sides: x=−1.The same reasoning applies to each bracket in turn.
  4. Set the third bracket to 0: 2x−3=0. Add 3 to both sides: 2x=3. Divide both sides by 2: x=32.A number sits on x here, so the sign flip shortcut is not enough. The equation has to be solved.
  5. Plug each back in. h(4)=(0)(5)(5)=0. h(−1)=(−5)(0)(−5)=0. At x=32 the last bracket is 2·32−3=0, so the product is 0.Each value makes one bracket 0, and 0 times anything is 0.
Answer
x-intercepts: (4, 0), (−1, 0) and (32, 0)
Double-check Second way: multiply the brackets out. (x − 4)(x + 1) = x2 − 3x − 4, and times (2x − 3) that is 2x3 − 9x2 + x + 12. In this form h(4) = 128 − 144 + 4 + 12 = 0 and h(−1) = −2 − 9 − 1 + 12 = 0. The degree is 3 and three x-intercepts were found, which is the most a degree 3 polynomial can have.

Part 3: Pull out what every term shares

Sometimes every term carries the same passenger: a number that divides every coefficient, or an x that appears in every term. Pulling it out front is like noticing that every item on a receipt was bought in packs of 3, and writing 3 × (the list) instead. It is the first thing to try, every time.

  • Pattern: ab + ac = a(b + c). The shared piece a goes out front, and each term is divided by a.
  • Shared number: when the coefficients are integers, not all 0, use their greatest common factor, the largest positive integer that divides every one of them.
  • Shared x: use the lowest power of x that appears in every term.
  • When the shared piece contains x, then x = 0 is one of the x-intercepts.
  • Test: multiply the front piece back through the bracket. You must get the original polynomial.
3x²−12x3xx−4
An area model where a part can count as negative.

Worked example

A shared factor with x in it

Find the x-intercepts of p(x) = 3x2 − 12x.

Show the steps and the answer
  1. Say what is asked: the output is 0, find every input that gives it. Write 3x2−12x=0.x-intercepts are the points where the output is 0.
  2. Find what both terms share. 3 divides 3 and 12, and each term has at least one x. The shared piece is 3x.3x2 = 3x · x and 12x = 3x · 4.
  3. Pull it out: 3x(x−4)=0.Multiply back to test: 3x · x = 3x2 and 3x · (−4) = −12x.
  4. Set each factor to 0. 3x=0 gives x=0, after dividing both sides by 3. x−4=0 gives x=4.The front piece 3x contains x, so it is a factor that can be 0. Together the two equations find every input with output 0.
  5. Plug back into the original: p(0)=3(0)2−12(0)=0, and p(4)=3(16)−12(4)=48−48=0.Both outputs are 0, so both points are on the x-axis.
Answer
x-intercepts: (0, 0) and (4, 0)
Double-check Second way: test a point between the intercepts in both forms. At x = 1 the original gives 3 − 12 = −9, and the factored form gives 3 · 1 · (1 − 4) = −9. The two forms agree, as they must; multiplying 3x back through (x − 4) gives 3x2 − 12x, which proves the factoring.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: 3x2 − 12x = 0, so divide both sides by x to get 3x − 12 = 0, and the only answer is x = 4.
Dividing by x is allowed only when x is not 0, and here x = 0 is one of the answers. The division throws it away.
✓ Instead: Factor instead: 3x(x − 4) = 0, so x = 0 or x = 4.

Part 4: Three terms: x2 + bx + c

When a three-term polynomial x2 + bx + c factors, it comes from two brackets, (x + m)(x + n). Multiplying them out gives x2 + (m + n)x + mn. So the last number c is the two mystery numbers multiplied, and the middle number b is the same two numbers added. Factoring is that puzzle run backwards: find two numbers that multiply to c and add to b. Some, such as x2 + 1, have no such pair of real numbers.

  • Pattern: x2 + bx + c = (x + m)(x + n), where m · n = c and m + n = b.
  • c positive: m and n have the same sign, and it is the sign of b.
  • c negative: m and n have different signs, and the one farther from 0 takes the sign of b; when b = 0 they are opposites, such as 4 and −4.
  • Method, for integers b and c: list the pairs of integers that multiply to c, then pick the pair with the right sum. When no pair has that sum, as for x2 − 2, there is no factoring with integers, and another method is needed.
  • If a number other than 1 sits on x2, first try to pull it out as a shared factor.
x²5xx2x102x5
The area picture shows (x + 2)(x + 5) as four parts, x2, 5x, 2x and 10, which add up to x2 + 7x + 10.

Worked example

Multiply to 10, add to 7

Find the x-intercepts of q(x) = x2 + 7x + 10.

Show the steps and the answer
  1. Say what is asked: the output is 0, find every input that gives it. Write x2+7x+10=0.x-intercepts are where the output is 0.
  2. Look for two numbers that multiply to 10 and add to 7. The pairs that multiply to 10 are 1 with 10, which add to 11, and 2 with 5, which add to 7. Use 2 and 5.The last number 10 is positive and the middle number 7 is positive, so both numbers are positive.
  3. Write the brackets: (x+2)(x+5)=0.Multiply back to test: x2 + 5x + 2x + 10 = x2 + 7x + 10.
  4. Set each bracket to 0. x+2=0 gives x=−2. x+5=0 gives x=−5.A product is 0 only when one of its factors is 0. These find every input with output 0.
  5. Plug back into the original: q(−2)=4−14+10=0, and q(−5)=25−35+10=0.(−2)2 = 4 and (−5)2 = 25, since a negative number squared is positive.
Answer
x-intercepts: (−2, 0) and (−5, 0)
Double-check Second way: the y-intercept must agree in both forms. From the original, q(0) = 10. From the brackets, (0 + 2)(0 + 5) = 10. They match, and the degree 2 polynomial has two x-intercepts, the most it can have.

Part 5: Two terms: a square minus a square

A square minus a square, such as x2 − 49, has only two terms and no middle term. It still comes from two brackets: the same two things, once with a minus and once with a plus. When you multiply the brackets out, the two middle terms cancel each other, like one step forward and one step back.

  • Pattern: a2 − b2 = (a − b)(a + b).
  • Why: (a − b)(a + b) = a2 + ab − ab − b2, and the middle terms ab and −ab cancel.
  • Squares to recognize: 1, 4, 9, 16, 25, 36, 49, 64, 81, 100.
  • A square plus a positive number, such as x2 + 49, does not split this way, and for real x it is never 0: x2 + 49 is at least 49.
x²7xx−7x−49−7x+7
The two middle parts 7x and −7x cancel, leaving x2 − 49.

Worked example

A square minus a square

Find the x-intercepts of r(x) = x2 − 49.

Show the steps and the answer
  1. Say what is asked: the output is 0, find every input that gives it. Write x2−49=0.x-intercepts are where the output is 0.
  2. Recognize the shape: x2 is a square and 49=72 is a square, with a minus between them.That is the pattern a2 − b2 with a = x and b = 7.
  3. Factor: (x−7)(x+7)=0.Multiply back to test: x2 + 7x − 7x − 49 = x2 − 49.
  4. Set each bracket to 0. x−7=0 gives x=7. x+7=0 gives x=−7.A product is 0 only when one of its factors is 0.
  5. Plug back: r(7)=49−49=0 and r(−7)=49−49=0.(−7)2 = 49, since a negative number squared is positive.
Answer
x-intercepts: (7, 0) and (−7, 0)
Double-check Second way: test a different input in both forms. At x = 8 the original gives 64 − 49 = 15, and the brackets give (8 − 7)(8 + 7) = 1 · 15 = 15. The forms agree.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: x2 + 49 = (x + 7)(x − 7), so its x-intercepts are 7 and −7.
(x + 7)(x − 7) multiplies out to x2 − 49, not x2 + 49. And x2 is never negative, so x2 + 49 is always at least 49.
✓ Instead: f(x) = x2 + 49 has no x-intercepts. Its only intercept is the y-intercept (0, 49).

Part 6: Fourth powers and real intercepts

A fourth power can hide two layers of squares. Picture opening a box and finding a smaller box inside. First split a difference of squares in x2. Then split the factor that is a difference of squares in x. Stop to check whether the other factor can be zero for a real input.

  • Why: (A − B)(A + B) = A2 − B2 because the middle products cancel.
  • Rule: x⁴ − b⁴ = (x − b)(x + b)(x2 + b2). For b ≠ 0, the last factor is positive for every real x.
  • Method: find f(0), set f(x) = 0, remove a nonzero common coefficient, factor twice, and substitute the real zeros back.
  • Degree limits the number of real intercepts; it does not promise that many.

x⁴−625=(x2−25)(x2+25)

x2−25=(x−5)(x+5)

x2 + 25 > 0 for real x

Worked example

Factor twice to find real intercepts

Find the y-intercept and every real x-intercept of f(x) = x⁴ − 625.

What it asks. Find the y-intercept and every real x-intercept of f(x) = x⁴ − 625.

Show the steps and the answer

The plan. Treat x⁴ as the square of x2. Factor twice, then ask whether each factor can be zero for real x.

x⁴−625=(x2−25)(x2+25)

x2−25=(x−5)(x+5)

x2 + 25 > 0 for real x

  1. Plan. Treat x⁴ as the square of x2. Factor twice, then ask whether each factor can be zero for real x.
  2. Treat x⁴ as the square of x2. Factor twice, then ask whether each factor can be zero for real x.
  1. f(0)=−625. The y-intercept is (0,−625).Every positive power of 0 is 0.
  2. Set f(x) = 0: x4−625=0.An x-intercept is an input where the output is 0. Here the leading coefficient is 1, so there is no number to divide out.
  3. x4−625=(x2−25)(x2+25).This is a difference of squares: (x2)2 − (25)2.
  4. x2−25=(x−5)(x+5).Factor the difference of squares again, using 25 = 52.
  5. The real zeros are −5 and 5; x2+25 gives none.For real x, x2 + 25 ≥ 25 > 0, so it cannot equal 0.
  6. x-intercepts: (−5,0) and (5, 0).Every x-intercept has output 0. Complex zeros are not points on this real graph.
Answer
  • y-intercept: (0, −625)
  • x-intercepts: (−5, 0) and (5, 0)
Double-check The complete factorization is (x − 5)(x + 5)(x2 + 25). Multiply back: (x − 5)(x + 5) = x2 − 25, and (x2 − 25)(x2 + 25) = x⁴ − 625. At x = 5 or x = −5, x⁴ = 625, so f(x) = 625 − 625 = 0. These are the only real zeros because x2 + 25 is always positive.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: A degree-4 polynomial must have four real x-intercepts.
Some of its zeros may be nonreal. An always-positive factor has no real zero.
✓ Instead: List only real points on the x-axis.
Tips and tricks
  • For an exam, practice this method with the answer folded. Check each step against the reason beside it.

Part 7: Build a formula from its intercepts

Reading intercepts from factors can be run backward. Think of each factor as a switch that turns the output to zero at one input. Build one switch for each given intercept. The sign in front points the far ends. The y-intercept checks the height of the whole graph.

  • Why: x − r equals 0 when x = r. A product containing that factor also equals 0 there.
  • When n distinct zeros are given for degree n, use f(x) = a(x − r₁)···(x − rₙ). These factors use the whole degree.
  • Method: write the factors, choose a from the right end if a is restricted to 1 or −1, then substitute 0 to check the given y-intercept.
  • If the multiplier is unrestricted, solve for it using the given point. If fewer zeros than the degree are supplied, extra information may be needed.
(−5, 0)(7, 0)(0, −35)−448−28−141428
y=(x−1)2−36.

Worked example

Build the formula from graph clues

A degree-2 polynomial has x-intercepts (−5, 0) and (7, 0), y-intercept (0, −35), and both ends rising. Its leading coefficient is 1 or −1. Find its formula.

What it asks. A degree-2 polynomial has x-intercepts (−5, 0) and (7, 0), y-intercept (0, −35), and both ends rising. Its leading coefficient is 1 or −1. Find its formula.

Show the steps and the answer

The plan. Translate each zero into a factor. Pick the leading sign from the right end, then check the y-intercept.

(−5, 0)(7, 0)(0, −35)−448−28−141428
The same picture again: y = (x − 1)2 − 36.
  1. Plan. Translate each zero into a factor. Pick the leading sign from the right end, then check the y-intercept.
  2. Translate each zero into a factor. Pick the leading sign from the right end, then check the y-intercept.
  1. Start with f(x)=a(x+5)(x−7).Each intercept r requires the factor x − r. Two distinct zeros use the two factors allowed by degree 2.
  2. Choose a=1.The right end rises, so the leading coefficient is positive. The allowed choices are 1 and −1.
  3. Check the height: f(0)=(5)(−7)=−35.The given y-intercept must agree; it is a separate requirement.
  4. Expand: f(x)=x2−2x−35.The middle products are −7x and 5x, which combine to −2x.
Answer
f(x)=(x+5)(x−7)=x2−2x−35.
Double-check Substitution: f(−5) = 25 + 10 − 35 = 0; f(7) = 49 − 14 − 35 = 0. The leading term x2 gives both ends up.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The zero −5 gives the factor x − 5.
At x = −5, x − 5 equals −10, not 0.
✓ Instead: Use x − (−5) = x + 5.
Tips and tricks
  • For an exam, practice this method with the answer folded. Check each step against the reason beside it.

5 How

  1. For f(x) = 2x2 − 4x − 30, use the y-intercept rule: set x = 0 because every point on the y-axis has that input. f(0) = −30, so the y-intercept is (0, −30).
  2. Use the x-intercept rule: set the output to zero because every point on the x-axis has height zero. Solve 2x2 − 4x − 30 = 0. Pull out the common factor 2 to get 2(x2 − 2x − 15) = 0; distributing 2 gives back all three terms.
  3. Factor x2 − 2x − 15: look for two numbers whose product is −15, the number with no x, and whose sum is −2, the number in front of x. They are 3 and −5, so x2 − 2x − 15 = (x + 3)(x − 5). Multiplying out checks it: x2 − 5x + 3x − 15 = x2 − 2x − 15.
  4. Apply the zero product property to 2(x + 3)(x − 5) = 0. The factor 2 cannot be zero, so solve x + 3 = 0 or x − 5 = 0. This gives x = −3 or x = 5. Use the x-intercept rule to write (−3, 0) and (5, 0).
  5. Check each input in the original formula: f(−3) = 18 + 12 − 30 = 0 and f(5) = 50 − 20 − 30 = 0. Both points have the required height zero. Check the y-intercept with the factored form too: 2(0 + 3)(0 − 5) = −30.

Finding the intercepts of a polynomial

1
Are you looking for the y-intercept?
YesPut 0 in for every x. The point is (0, f(0)). No factoring is needed.
NoYou want the x-intercepts. If the polynomial is 0 itself, every x is one. Otherwise write f(x) = 0 and go on.
↓
2
Is the polynomial already written as brackets multiplied together?
YesSet each factor that contains x, a lone x out front included, to 0 and solve each small equation.
NoGo on.
↓
3
Does every term share a number or a power of x?
YesPull it out front. If the shared piece contains x, then x = 0 is one x-intercept. Then go on with what is left in the bracket.
NoGo on.
↓
4
Does a bracket have two terms, a square minus a square?
YesSplit it: a2 − b2 = (a − b)(a + b).
NoGo on.
↓
5
Does a bracket have three terms in the shape x2 + bx + c?
YesFind two numbers that multiply to c and add to b, if there are any, and write (x + m)(x + n). If there are none, the bracket does not split this way.
NoGo on.
↓
6
Is a leftover factor always positive, such as x2 + 4, or a plain number other than 0, such as 3?
YesIt is never 0. It gives no x-intercept, so skip it.
NoSet it to 0 and solve.
  1. y-intercept: put 0 in for every x and compute. Write the point (0, f(0)).
  2. x-intercepts: write f(x) = 0, with 0 alone on one side.
  3. Pull out anything every term shares: a number, a power of x, or both.
  4. Factor what is left: a square minus a square, or three terms by the multiply and add search.
  5. Set each factor that contains x equal to 0 and solve. Skip any factor that can never be 0.
  6. Write each answer as a point (c, 0), then plug each one back into the original formula.

6 Worked example

Worked example

Both kinds of intercept for f(x) = 2x2 − 4x − 30

Find the y-intercept and the x-intercepts of f(x) = 2x2 − 4x − 30.

Show the steps and the answer
input xoutput f(x)−418−30−2−140−302−304−1450618↑ solve: output given, read every input above it
The output is 0 in exactly two columns.
  1. Say what is asked. For the y-intercept: the input is 0, find the output. For the x-intercepts: the output is 0, find every input that gives it.The two questions set different things to zero, so they are two separate jobs.
  2. Put 0 in for x: f(0)=2(0)2−4(0)−30=0−0−30=−30. The y-intercept is (0,−30).Every point on the y-axis has x = 0. Each term that has an x becomes 0, so only the constant term −30 is left.
  3. Write the equation 2x2−4x−30=0.The graph meets the x-axis only where the output is 0.
  4. Pull the shared 2 out front: 2(x2−2x−15)=0.2 divides all three coefficients: 2, −4 and −30. Multiply back to test it: 2 · x2 = 2x2, 2 · (−2x) = −4x, 2 · (−15) = −30.
  5. Find two numbers that multiply to −15 and add to −2. They are 3 and −5.The product is negative, so the two signs differ. The sum is negative, so the number farther from 0 carries the minus. The pairs that make 15 are 1 with 15 and 3 with 5. Only 3 and −5 add to −2.
  6. Write the factored form: 2(x+3)(x−5)=0.Multiplying out confirms it: (x + 3)(x − 5) = x2 − 5x + 3x − 15 = x2 − 2x − 15, the bracket from the step before.
  7. Set each factor that contains x equal to 0. x+3=0 gives x=−3. x−5=0 gives x=5. The factor 2 is never 0, so it gives nothing.A product is 0 only when one of its factors is 0. These two small equations find every input that makes the output 0.
  8. Plug each value back into the original formula. f(−3)=2(9)−4(−3)−30=18+12−30=0. f(5)=2(25)−4(5)−30=50−20−30=0.Plugging back shows that each value really gives an output of 0. It uses the original formula, so it would catch a factoring mistake.
  9. Write the x-intercepts as points: (−3,0) and (5, 0).An intercept is a point on the graph, and on the x-axis the second coordinate is 0.
Answer
  • y-intercept: (0, −30)
  • x-intercepts: (−3, 0) and (5, 0)
Double-check Second way, from the factored form: putting 0 into 2(x + 3)(x − 5) gives 2 · 3 · (−5) = −30, the same y-intercept. In the table, the two 0s in the output row sit under the inputs −3 and 5, and the column for x = 0 holds −30. The leading term 2x2 says both arms point up, and a graph that sits at −30 when x = 0 with both arms up must meet the x-axis once on each side of 0, which matches −3 and 5.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 11

Already factored

Find the y-intercept and the x-intercepts of f(x) = (x − 2)(x + 6).

Show the steps and the answer
  1. Say what is asked: first the output when the input is 0, then every input whose output is 0.These are the two intercept questions, and each sets a different thing to 0.
  2. Put 0 in each bracket: f(0)=(0−2)(0+6)=(−2)(6)=−12. The y-intercept is (0,−12).On the y-axis x is 0. A negative times a positive is negative.
  3. Set each bracket to 0. x−2=0 gives x=2. x+6=0 gives x=−6.The polynomial is already a product, and a product is 0 only when one of its factors is 0. This finds every input with output 0.
  4. Plug back: f(2)=(0)(8)=0 and f(−6)=(−8)(0)=0.Each value makes one bracket 0, and 0 times anything is 0.
Answer
  • y-intercept: (0, −12)
  • x-intercepts: (2, 0) and (−6, 0)
Double-check Second way: multiply the brackets out. (x − 2)(x + 6) = x2 + 6x − 2x − 12 = x2 + 4x − 12. The constant term is −12, matching the y-intercept. In this form f(2) = 4 + 8 − 12 = 0 and f(−6) = 36 − 24 − 12 = 0.

Rung 2 of 11

A shared x

Find the y-intercept and the x-intercepts of f(x) = x2 − 5x.

Show the steps and the answer
  1. Put 0 in for x: f(0)=02−5(0)=0. The y-intercept is (0, 0).There is no constant term showing, so the constant is 0 and the graph passes through the origin.
  2. Write x2 − 5x = 0 and pull out the shared x: x(x−5)=0.Each term has at least one x. Multiply back to test: x · x = x2 and x · (−5) = −5x.
  3. Set each factor to 0. The lone x gives x=0. The bracket x−5=0 gives x=5.The x out front is a factor too, and it can be 0. Leaving it out would lose an intercept.
  4. Plug back: f(0)=0 and f(5)=25−25=0.Both outputs are 0, so both points are on the x-axis.
Answer
  • y-intercept: (0, 0)
  • x-intercepts: (0, 0) and (5, 0)
Double-check The origin (0, 0) sits on both axes, so it is the y-intercept and one of the x-intercepts at the same time. Second way: test x = 1 in both forms. The original gives 1 − 5 = −4, and the factored form gives 1 · (1 − 5) = −4.

Rung 3 of 11

Three terms, both numbers negative

Find the y-intercept and the x-intercepts of f(x) = x2 − 9x + 20.

Show the steps and the answer
  1. Put 0 in for x: f(0)=0−0+20=20. The y-intercept is (0, 20).The terms with x become 0, leaving the constant term.
  2. Write x2−9x+20=0. Look for two numbers that multiply to 20 and add to −9.A three-term x2 + bx + c factors as (x + m)(x + n) with m · n = c and m + n = b.
  3. The product 20 is positive and the sum −9 is negative, so both numbers are negative. Try the pairs: −1 with −20 adds to −21,−2 with −10 adds to −12,−4 with −5 adds to −9. Use −4 and −5.Two negatives multiply to a positive and add to a negative, which is what this polynomial needs.
  4. Write (x−4)(x−5)=0.Multiply back to test: x2 − 5x − 4x + 20 = x2 − 9x + 20.
  5. Set each bracket to 0: x−4=0 gives x=4, and x−5=0 gives x=5.A product is 0 only when one of its factors is 0. This finds every input with output 0.
  6. Plug back into the original: f(4)=16−36+20=0 and f(5)=25−45+20=0.Both outputs are 0.
Answer
  • y-intercept: (0, 20)
  • x-intercepts: (4, 0) and (5, 0)
Double-check Second way: put 0 into the factored form. (0 − 4)(0 − 5) = (−4)(−5) = 20, the same y-intercept the original gave.

Rung 4 of 11

A shared number, then a square minus a square

Find the y-intercept and the x-intercepts of f(x) = 3x2 − 75.

Show the steps and the answer
  1. Put 0 in for x: f(0)=3(0)2−75=−75. The y-intercept is (0,−75).The term with x becomes 0, leaving the constant term.
  2. Write 3x2 − 75 = 0 and pull out the shared 3: 3(x2−25)=0.3 divides both coefficients, and 75 ÷ 3 = 25. Always look for a shared factor first.
  3. Recognize x2 − 25 as x2 − 52, a square minus a square. Factor: 3(x−5)(x+5)=0.a2 − b2 = (a − b)(a + b) with a = x and b = 5. The middle terms 5x and −5x cancel.
  4. Set each bracket to 0: x−5=0 gives x=5, and x+5=0 gives x=−5. The 3 out front is never 0.Only a factor that contains x can be made 0 by choosing x.
  5. Plug back into the original: f(5)=3(25)−75=0 and f(−5)=3(25)−75=0.(−5)2 = 25, the same as 52.
Answer
  • y-intercept: (0, −75)
  • x-intercepts: (5, 0) and (−5, 0)
Double-check Second way: put 0 into the factored form. 3(0 − 5)(0 + 5) = 3 · (−5) · 5 = −75, matching the y-intercept from the original.

Rung 5 of 11

Degree 3, a shared x and then three terms

Find the y-intercept and the x-intercepts of f(x) = x3 + 2x2 − 8x.

Show the steps and the answer
  1. Put 0 in for x: f(0)=0+0−0=0. The y-intercept is (0, 0).Every term has an x, so every term becomes 0.
  2. Write x3 + 2x2 − 8x = 0 and pull out the shared x: x(x2+2x−8)=0.The lowest power of x in every term is x. Multiply back to test: x · x2 = x3, x · 2x = 2x2, x · (−8) = −8x.
  3. Factor the bracket. Two numbers that multiply to −8 and add to 2 are 4 and −2. So x(x+4)(x−2)=0.The product is negative, so the signs differ. The sum is positive, so the bigger number is the positive one. Test: (x + 4)(x − 2) = x2 − 2x + 4x − 8 = x2 + 2x − 8.
  4. Set each factor to 0: x=0, then x+4=0 gives x=−4, then x−2=0 gives x=2.There are three factors that contain x, and any one of them being 0 makes the product 0.
  5. Plug back into the original: f(−4)=−64+32+32=0,f(2)=8+8−16=0, and f(0)=0.(−4)3 = −64 because an odd power of a negative is negative, and (−4)2 = 16 because an even power is positive.
Answer
  • y-intercept: (0, 0)
  • x-intercepts: (−4, 0), (0, 0) and (2, 0)
Double-check Second way: test x = 1 in both forms. The original gives 1 + 2 − 8 = −5, and the factored form gives 1 · (1 + 4) · (1 − 2) = 1 · 5 · (−1) = −5. The degree is 3 and three x-intercepts were found, the most possible.

Rung 6 of 11

A factor that is never 0

Find the y-intercept and the x-intercepts of f(x) = x4 − 16.

Show the steps and the answer
  1. Put 0 in for x: f(0)=0−16=−16. The y-intercept is (0,−16).The term with x becomes 0, leaving the constant term.
  2. Write x4−16=0. See it as a square minus a square: x4=(x2)2 and 16=42. Factor: (x2−4)(x2+4)=0.a2 − b2 = (a − b)(a + b) with a = x2 and b = 4.
  3. The first bracket is again a square minus a square: x2−4=(x−2)(x+2). So (x−2)(x+2)(x2+4)=0.x2 − 22 splits the same way. Keep factoring until no bracket can be split further.
  4. Set the first two brackets to 0: x−2=0 gives x=2, and x+2=0 gives x=−2.These find the inputs that make those brackets 0.
  5. Look at x2+4. It gives no x-intercept.x2 is never negative, so x2 + 4 is always 4 or more. It can never be 0.
  6. Plug back into the original: f(2)=16−16=0 and f(−2)=(−2)4−16=16−16=0.An even power of a negative number is positive, so (−2)4 = 16.
Answer
  • y-intercept: (0, −16)
  • x-intercepts: (2, 0) and (−2, 0)
Double-check Second way: put 0 into the factored form. (0 − 2)(0 + 2)(0 + 4) = (−2)(2)(4) = −16, matching the y-intercept. Also test x = 1 in both forms: 1 − 16 = −15, and (−1)(3)(5) = −15. The degree is 4 but there are only 2 x-intercepts. That is allowed: the degree is the most there can be, not a promise.

Rung 7 of 11

A negative out front and x2 treated as one block

Find the y-intercept and the x-intercepts of f(x) = −2x4 + 20x2 − 18.

Show the steps and the answer

−2x4+20x2−18

=−2(x4−10x2+9)

=−2(x2−1)(x2−9)

=−2(x−1)(x+1)(x−3)(x+3)

  1. Put 0 in for x: f(0)=−2(0)+20(0)−18=−18. The y-intercept is (0,−18).The terms with x become 0, leaving the constant term.
  2. Write −2x4+20x2−18=0 and pull out −2: −2(x4−10x2+9)=0.−2 divides −2, 20 and −18. Taking the negative out makes the first term inside positive. Each sign inside flips: 20 ÷ (−2) = −10 and −18 ÷ (−2) = 9.
  3. Treat x2 as one block. Since x4=(x2)2, the bracket reads block2−10· block +9. Two numbers that multiply to 9 and add to −10 are −1 and −9. So −2(x2−1)(x2−9)=0.The three-term method works on any block, not only on a plain x. Test: (x2 − 1)(x2 − 9) = x4 − 9x2 − x2 + 9 = x4 − 10x2 + 9.
  4. Each bracket is a square minus a square. x2−1=(x−1)(x+1) and x2−9=(x−3)(x+3). So −2(x−1)(x+1)(x−3)(x+3)=0.1 = 12 and 9 = 32, so the pattern a2 − b2 = (a − b)(a + b) applies twice.
  5. Set each bracket to 0: x=1,x=−1,x=3,x=−3. The −2 out front is never 0.Four brackets contain x, and each gives one small equation. Together they find every input with output 0.
  6. Plug back into the original: f(1)=−2+20−18=0, and f(3)=−2(81)+20(9)−18=−162+180−18=0. The inputs −1 and −3 give the same outputs.Every power of x in this polynomial is even, so a negative input gives the same result as its positive partner.
Answer
  • y-intercept: (0, −18)
  • x-intercepts: (−3, 0), (−1, 0), (1, 0) and (3, 0)
Double-check Second way: put 0 into the factored form. −2(−1)(1)(−3)(3) = −2 · 9 = −18, matching the y-intercept. Then test x = 2 in both forms: the original gives −32 + 80 − 18 = 30, and the factored form gives −2(1)(3)(−1)(5) = −2 · (−15) = 30. The degree is 4 and four x-intercepts were found, the most possible.

Rung 8 of 11

A fourth power with a positive factor

Find the y-intercept and every real x-intercept of f(x) = 3x⁴ − 3888.

What it asks. Find the y-intercept and every real x-intercept of f(x) = 3x⁴ − 3888.

Show the steps and the answer

The plan. Treat x⁴ as the square of x2. Factor twice, then ask whether each factor can be zero for real x.

x⁴−1296=(x2−36)(x2+36)

x2−36=(x−6)(x+6)

x2 + 36 > 0 for real x

  1. Plan. Treat x⁴ as the square of x2. Factor twice, then ask whether each factor can be zero for real x.
  2. Treat x⁴ as the square of x2. Factor twice, then ask whether each factor can be zero for real x.
  1. f(0)=−3888. The y-intercept is (0,−3888).Every positive power of 0 is 0.
  2. Set f(x)=0. Divide by 3 to get x4−1296=0.A nonzero constant factor cannot create or remove a zero.
  3. x4−1296=(x2−36)(x2+36).This is a difference of squares: (x2)2 − (36)2.
  4. x2−36=(x−6)(x+6).Factor the difference of squares again, using 36 = 62.
  5. The real zeros are −6 and 6; x2+36 gives none.For real x, x2 + 36 ≥ 36 > 0, so it cannot equal 0.
  6. x-intercepts: (−6,0) and (6, 0).Every x-intercept has output 0. Complex zeros are not points on this real graph.
Answer
  • y-intercept: (0, −3888)
  • x-intercepts: (−6, 0) and (6, 0)
Double-check The complete factorization is 3(x − 6)(x + 6)(x2 + 36). Multiply back: (x − 6)(x + 6) = x2 − 36, and 3(x2 − 36)(x2 + 36) = 3(x⁴ − 1296) = 3x⁴ − 3888. At x = 6 or x = −6, x⁴ = 1296, so f(x) = 3 · 1296 − 3888 = 0. These are the only real zeros because x2 + 36 is always positive.

Rung 9 of 11

A fourth power with a negative factor

Find the y-intercept and every real x-intercept of f(x) = −2x⁴ + 512.

What it asks. Find the y-intercept and every real x-intercept of f(x) = −2x⁴ + 512.

Show the steps and the answer

The plan. Treat x⁴ as the square of x2. Factor twice, then ask whether each factor can be zero for real x.

x⁴−256=(x2−16)(x2+16)

x2−16=(x−4)(x+4)

x2 + 16 > 0 for real x

  1. Plan. Treat x⁴ as the square of x2. Factor twice, then ask whether each factor can be zero for real x.
  2. Treat x⁴ as the square of x2. Factor twice, then ask whether each factor can be zero for real x.
  1. f(0)=512. The y-intercept is (0, 512).Every positive power of 0 is 0.
  2. Set f(x)=0. Divide by −2 to get x4−256=0.A nonzero constant factor cannot create or remove a zero.
  3. x4−256=(x2−16)(x2+16).This is a difference of squares: (x2)2 − (16)2.
  4. x2−16=(x−4)(x+4).Factor the difference of squares again, using 16 = 42.
  5. The real zeros are −4 and 4; x2+16 gives none.For real x, x2 + 16 ≥ 16 > 0, so it cannot equal 0.
  6. x-intercepts: (−4,0) and (4, 0).Every x-intercept has output 0. Complex zeros are not points on this real graph.
Answer
  • y-intercept: (0, 512)
  • x-intercepts: (−4, 0) and (4, 0)
Double-check The complete factorization is −2(x − 4)(x + 4)(x2 + 16). Multiply back: (x − 4)(x + 4) = x2 − 16, and −2(x2 − 16)(x2 + 16) = −2(x⁴ − 256) = −2x⁴ + 512. At x = 4 or x = −4, x⁴ = 256, so f(x) = −2 · 256 + 512 = 0. These are the only real zeros because x2 + 16 is always positive.

Rung 10 of 11

Build a downward quadratic

A degree-2 polynomial has x-intercepts (−4, 0) and (9, 0), y-intercept (0, 36), and both ends falling. Its leading coefficient is 1 or −1. Find its formula.

What it asks. A degree-2 polynomial has x-intercepts (−4, 0) and (9, 0), y-intercept (0, 36), and both ends falling. Its leading coefficient is 1 or −1. Find its formula.

Show the steps and the answer

The plan. Use a factor for each zero and a minus sign to make the right end fall.

zero −4 → x + 4

zero 9 → x − 9

right end down → a = −1

f(0) must be 36

  1. Plan. Use a factor for each zero and a minus sign to make the right end fall.
  2. Use a factor for each zero and a minus sign to make the right end fall.
  1. f(x)=a(x+4)(x−9).The two zeros give two linear factors, which use the full degree.
  2. a=−1, so f(x)=−(x+4)(x−9).The right end falls, so the leading coefficient must be negative.
  3. f(0)=−(4)(−9)=36.This checks the given y-intercept.
  4. f(x)=−x2+5x+36.Expand the two brackets, then apply the minus sign to every term.
Answer
f(x)=−(x+4)(x−9)=−x2+5x+36.
Double-check The expanded form gives f(−4) = −16 − 20 + 36 = 0 and f(9) = −81 + 45 + 36 = 0. Its leading term −x2 sends both ends down.

Rung 11 of 11

Build a cubic from all its intercepts

A degree-3 polynomial has x-intercepts (−6, 0), (2, 0) and (5, 0), y-intercept (0, −60), left end rising and right end falling. Its leading coefficient is 1 or −1. Find its formula.

What it asks. A degree-3 polynomial has x-intercepts (−6, 0), (2, 0) and (5, 0), y-intercept (0, −60), left end rising and right end falling. Its leading coefficient is 1 or −1. Find its formula.

Show the steps and the answer

The plan. Three distinct intercepts require three factors. After choosing the sign, test x = 0.

zeros −6, 2, 5 → (x + 6)(x − 2)(x − 5)

right end down → multiply by −1

degree 3 → three linear factors

f(0)=−60

  1. Plan. Three distinct intercepts require three factors. After choosing the sign, test x = 0.
  2. Three distinct intercepts require three factors. After choosing the sign, test x = 0.
  1. f(x)=a(x+6)(x−2)(x−5).The three distinct zeros require three linear factors. They use the full degree.
  2. a=−1.The right end falls, so use the negative allowed coefficient.
  3. f(0)=−(6)(−2)(−5)=−60.This agrees with the required y-intercept.
  4. (x−2)(x−5)=x2−7x+10. Then (x+6)(x2−7x+10)=x3−7x2+10x+6x2−42x+60=x3−x2−32x+60. So f(x)=−x3+x2+32x−60.Multiply x and then 6 by each term of the quadratic, combine like terms, then apply the minus sign to every term.
Answer
f(x)=−(x+6)(x−2)(x−5)=−x3+x2+32x−60.
Double-check At −6: 216 + 36 − 192 − 60 = 0. At 2: −8 + 4 + 64 − 60 = 0. At 5: −125 + 25 + 160 − 60 = 0. Odd degree and a negative leading term give the stated opposite ends.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: (x − 2)(x + 3) = 6, so x − 2 = 6 or x + 3 = 6, which gives x = 8 or x = 3.
Only a product of 0 forces one factor to be 0. A product of 6 fixes neither factor; it only rules out 0 for each. Test x = 8: (6)(11) = 66, not 6.
✓ Instead: Get 0 on one side first. Multiply out: x2 + x − 6 = 6, so x2 + x − 12 = 0, so (x + 4)(x − 3) = 0, so x = −4 or x = 3. Test: (−6)(−1) = 6 and (1)(6) = 6.
✗ Not this: x2 − 5x = 0, so divide both sides by x to get x − 5 = 0. The only x-intercept is 5.
Dividing by x assumes x is not 0, but x = 0 is one of the answers: 02 − 5(0) = 0. The division throws that intercept away.
✓ Instead: Factor instead of dividing: x(x − 5) = 0, so x = 0 or x = 5.
✗ Not this: f(x) = (x + 3)(x − 5) has x-intercepts at 3 and −5.
Test it: f(3) = (6)(−2) = −12, not 0. The intercept is the value that makes the bracket 0, which has the opposite sign from the number you see.
✓ Instead: x + 3 = 0 gives x = −3, and x − 5 = 0 gives x = 5. The x-intercepts are (−3, 0) and (5, 0).
✗ Not this: Every polynomial has x-intercepts, so f(x) = x2 + 9 must cross the x-axis somewhere.
x2 is never negative, so x2 + 9 is always 9 or more. The output is never 0. Here the rule 'set f(x) = 0 and solve' has no solution to find.
✓ Instead: f(x) = x2 + 9 has no x-intercepts. It still has its one y-intercept, (0, 9).
✗ Not this: The y-intercept of f(x) = x2 − 2x − 3 is (−3, 0).
The point (−3, 0) has y = 0, so it is on the x-axis, not the y-axis. The coordinates are in the wrong order.
✓ Instead: The input is 0 and the output is −3, so the y-intercept is (0, −3).

Tips and tricks

  • Memory cue: to find one letter's intercept, set the other letter to zero. For the y-intercept, x is 0. For the x-intercepts, y is 0.
  • Check a factoring by multiplying it back out. Check an x-intercept by plugging it into the original formula, not the factored one, because a wrong factoring would agree with itself.
  • Sign cue for x2 + bx + c: when c is positive, the two numbers share the sign of b. When c is negative, the signs differ and the number farther from 0 takes the sign of b (when b = 0 the two numbers are opposites, such as 4 and −4).
  • Count check: a polynomial of degree n has at most n x-intercepts. Each x-intercept c matches a factor (x − c), and more than n such factors multiplied together would produce a power higher than xn. Three x-intercepts for a degree 2 polynomial means there is an error.
  • End behavior check: if the leading term says both arms point up and the y-intercept is below the x-axis, the graph must meet the x-axis at least once on each side of 0.
  • Two views of the y-intercept: it is the constant term when the polynomial is written term by term, and it is what you get by putting 0 in every bracket of the factored form. The two must agree.

7 The trap

The most common mistake is reading the number inside a bracket with its sign unchanged. The factor (x + 3) does not give an intercept at 3. It gives −3, because −3 is the value that makes x + 3 equal 0. To avoid it, write the small equation x + 3 = 0 every time, solve it, and plug the answer back in. If the output is not 0, the sign is wrong.

Keep in mind

  • Exam skills: find both kinds of intercepts, keep the zero from a common x factor, and factor fourth powers.
  • Build a polynomial from its intercepts, degree, end directions and y-intercept. Accept equivalent factored or expanded formulas.

Flash cards

Say the answer out loud, then flip.

How do you find the y-intercept of a polynomial f(x)?
Put 0 in for every x and do the arithmetic. The point is (0, f(0)). When the polynomial is written term by term, f(0) is the constant term, the term with no x. For f(x) = x2 − 5x + 6, the y-intercept is (0, 6).
Think of the graph as a hiking trail and the x-axis as sea level. What equation finds the x-intercepts, and why that one?
Solve f(x) = 0. The x-intercepts are the spots where the trail touches sea level, and the height there is 0. Each solution c is written as the point (c, 0).
A polynomial factors as (x + 3)(x − 2). What are its x-intercepts?
  • (−3, 0) and (2, 0).
  • Write each small equation: x + 3 = 0 gives x = −3, and x − 2 = 0 gives x = 2.
  • The sign flips from what you see in the bracket. Plug each answer back in. The output must be 0.
Why can you set each factor to 0 when the product equals 0, but read no factor off when the product is some other number such as 6?
  • Two numbers that are both not zero never multiply to zero. So a product of 0 means at least one factor is 0, and each factor gives one small equation to solve. A product of 6 could be 1
  • 6, 2
  • 3, 4
  • 1.5 or endless other pairs, so it pins neither factor to a value; you learn only that neither one is 0.

Lesson 6 of 6

Turning points

Subject: MathematicsLeans on: DegreeLeans on: End behaviorLeans on: Rising and fallingLeans on: At most and at leastLeans on: Adding to both sides of an inequalityLeans on: A minus sign in front of a powerOpen this lesson
Leans on 0Comes back in 0

1 In plain words

The big picture. Use a graph’s changes of direction to put a lower bound on its degree. The degree limits how many turns are possible. Combine this with intercepts and end behavior from earlier lessons to prepare for sketching polynomial graphs in the next unit.

Picture the graph as a hiking trail that you walk from left to right. Sometimes you climb and sometimes you go down. A hilltop is a spot where climbing switches to going down. The bottom of a dip is a spot where going down switches to climbing. Each of those spots is a turning point: a place where the graph turns around. A polynomial cannot have as many hilltops and dips as it likes. Its degree sets a limit. A polynomial of degree n, where n is 1 or more, has at most n − 1 turning points. Degree 2 allows 1. Degree 5 allows 4. Read backward, a graph with 3 turning points needs a degree of 4 or more.

2 Picture it

turning point (0, 0)−222468turning point (0, 0)−3−2−11232468
The graph of y = x2 falls, bottoms out at (0, 0) and rises.

Reminder

Reminder: Degree, End behavior, Rising and falling, At most and at least, Adding to both sides of an inequality, A minus sign in front of a power
  • Degree. The degree is the highest power of x once the polynomial is multiplied out: 4x2 − x5 + 1 has degree 5, even though x5 is not written first.
  • End behavior. Even degree: both arms point the same way. Odd degree: the arms point opposite ways. The right arm points up when the leading coefficient is positive: y = −x2 has both arms down.
  • Rising and falling. Read a graph left to right, like a line of text. Rising means the outputs get larger as x gets larger: y = x2 falls until x = 0 and rises after.
  • At most and at least. At most 3 means 3 or fewer: 0, 1, 2 or 3. At least 4 means 4 or more: 4, 5, 6 and so on.
  • Adding to both sides of an inequality. Adding the same number to both sides keeps an inequality true: 3 ≤ n − 1 becomes 4 ≤ n.
  • A minus sign in front of a power. Do the power first, then the minus sign: for −x4 at x = −2, (−2)4 = 16, so the value is −16.

3 Why

At a turning point the graph is level for an instant: at a peak it has stopped climbing and has not started down yet, and at a valley it has stopped falling and has not started up yet. Calculus proves that, for a polynomial of degree n of 1 or more, the steepness is described by a polynomial of degree n − 1. Take that one fact on trust here. A polynomial of degree n − 1 has at most n − 1 x-intercepts, because each x-intercept c uses up one factor (x − c). So the steepness can be zero in at most n − 1 places, and every turning point needs one. Some level spots do not turn, which is why the rule says at most.

4 The rule

A turning point is a point where the graph changes from rising to falling (a peak) or from falling to rising (a valley), read left to right.source 1

A polynomial of degree n, where n is 1 or more, has at most n−1 turning points.source 1
Backward: a polynomial that is not constant and whose graph has t turning points has degree at least t+1.

Sources (1)
  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

The same idea, five ways

Say it

'the graph turns around here.' For the rule, say: 'a polynomial of degree n, with n at least 1, has at most n minus 1 turning points.'

Write it

A turning point is a point on a graph where the graph changes from rising to falling or from falling to rising. For a polynomial of degree 1 or more, the number of turning points is at most one less than its degree.

In math
  • degree n ≥ 1: number of turning points ≤ n − 1
  • n ≥ t + 1 for a polynomial that is not constant, where t is the number of turning points
  • degree 2: at most 1. degree 3: at most 2. degree 4: at most 3
  • graph words: a peak (rising, then falling) or a valley (falling, then rising)
Like

A hilltop or the bottom of a dip on a trail: the spot where uphill becomes downhill, or downhill becomes uphill.

See it
peak (0, 4)−22−4−224
The graph of y = −x2 + 4 rises to (0, 4) and then falls: the peak is its one turning point.

The same idea, other ways

With small numbers

Take f(x) = x3 − 3x and read the output row of the table left to right: −18, −2, 2, 0, −2, 2, 18. The outputs climb to 2 (the column under −1), drop through 0 to −2 (the column under 1), then climb again. Two switches of direction, so two turning points: a peak at (−1, 2) and a valley at (1, −2). The degree is 3 and 3 − 1 = 2, so this graph uses its full allowance. A table can miss a turn that sits between two columns, so a graph is the safer place to count. Here the graph agrees with the table.

input xoutput f(x)−3−18−2−2−12001−222318↓ evaluate: input given, read the output below it
The outputs rise to 2 under −1, fall to −2 under 1, then rise again.
As a story

Think of the temperature over one day. It climbs through the morning, tops out in the middle of the afternoon, and drops through the night until dawn, when it starts climbing again. The afternoon high and the dawn low are the turning points of the day's temperature graph. Nothing special happens at noon, when the temperature is still climbing, even if it passes a round number like 70 degrees on the way up. Passing a level is not turning around. In the same way, a graph crossing the x-axis is not a turning point unless the graph also switches direction there.

The rule is a limit, not a count

Look at y = x3. Its degree is 3, so it is allowed up to 3 − 1 = 2 turning points. It uses none. The graph climbs, levels off for an instant at (0, 0), and keeps climbing. It never comes back down, so nothing turned around. The degree tells you the most turning points a graph can have. The graph is free to have fewer.

level, but no turn−22−8−448
The graph of y = x3 flattens at (0, 0) and keeps rising, so a degree 3 graph can have zero turning points.
Rule of thumb

Forward, subtract. Backward, add for a lower bound. For a nonconstant polynomial, degree minus 1 is the most turns. Turns plus 1 is the degree bound from that count alone. Look at the whole picture too: a curved graph with a level crossing cannot be a line, even when it has zero turns. The parabola y = x2 anchors the count: degree 2, one turn.

Degree n ≥ 1: at most n − 1 turning points

Not constant, t turning points: degree at least t + 1

Anchor: y = x2 has degree 2 and 1 turn

Why the count matches the arms

Suppose both arms point up. Reading left to right, the graph starts out falling, because it is coming down from the upper left, and it ends up rising. To start falling and end rising, it must switch direction an odd number of times: 1, 3, 5 and so on. For a polynomial that is not constant, arms pointing the same way mean an even degree, so an even degree goes with an odd number of turning points. Now suppose the arms point opposite ways. Then the graph starts and ends going the same direction, so it switches an even number of times: 0, 2, 4 and so on. That is an odd degree. This gives a free check on every count.

Degree nLimit: n − 1 turning pointsCounts that can happenExamples
100y = 2x + 1 has 0: a line never turns
211y = x2 has 1: one valley
320 or 2y = x3 has 0
y = x3 − 3x has 2
431 or 3y = x4 has 1
y = x4 − 8x2 + 3 has 3
540, 2 or 4y = x5 has 0
y = x5 − 5x3 + 4x has 4

Part 1: Could this be a polynomial graph?

Before counting hills, check whether the road is the right kind of road. A polynomial graph is smooth and unbroken for every real input. You can reject a corner, a hole, a jump or a vertical asymptote. An asymptote is a line the graph approaches; a vertical one can have heights grow without bound near one input.

  • Why: a finite sum of whole-number powers is defined and continuous for every real x. Its slope is a polynomial too, so it has no sharp corner.
  • Rule: any missing real input, jump, corner or vertical asymptote rules out a polynomial.
  • A nonconstant polynomial also grows without bound at both far ends. A nonconstant curve that approaches a fixed height at an end is not a polynomial.
  • Method: check the domain and joins, check the ends, then count turns only if a polynomial is possible.
  • A smooth unbroken picture can be consistent with a polynomial. Those features alone do not prove that its formula is a polynomial.
corner246846810
y=|x−4|+6.

Worked example

A corner rules a polynomial out

The graph shown has a sharp corner at (4, 6). Could it be a polynomial graph? Explain.

What it asks. The graph shown has a sharp corner at (4, 6). Could it be a polynomial graph? Explain.

corner246846810
The same picture again: y = |x − 4| + 6.
Show the steps and the answer

The plan. Inspect the joins in the curve before counting its turns.

  1. Plan. Inspect the joins in the curve before counting its turns.
  2. Inspect the joins in the curve before counting its turns.
  1. The curve has no gap, but it has a sharp corner.Its two straight sides meet with different directions at one point.
  2. It cannot be a polynomial graph.A polynomial has a smooth graph at every real input; its direction cannot jump at a corner.
Answer
No. The sharp corner rules out a polynomial.
Double-check The drawing is y = |x − 4| + 6. For x < 4 the slope is −1, and for x > 4 it is 1. Those slopes jump at 4, which a polynomial cannot do.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Any unbroken graph must be a polynomial.
An absolute-value graph is unbroken but has a corner; smooth nonpolynomial graphs exist too.
✓ Instead: Use these features to reject impossible graphs. Give a polynomial formula when you need proof of possibility.
Tips and tricks
  • For an exam, practice this method with the answer folded. Check each step against the reason beside it.

Part 2: Reading the whole graph

Turn counts are like a minimum ticket price: they give a starting bound, and extra requirements can raise it. First count each change of direction. Then read the ends and any clear shape information. A straight line and a curved flat crossing can both have zero turns, but only the line can have degree 1.

  • Rule: t turns imply n ≥ t + 1 for a nonconstant polynomial. That statement is a lower bound, not a formula for every visible graph.
  • Method: count turns, add 1, check even or odd degree from the ends, then rule out degrees that cannot show the remaining features.
  • Why: a line has constant slope. A curved graph with an isolated level spot cannot be linear. A cubic can rise or fall through a level spot without turning.
  • If the question gives only the turn count, t + 1 is the least degree allowed by that count alone. A flat horizontal graph is the separate constant case.
level crossing246−4481216
y=(x−4)3+6.

Worked example

A curved crossing with no turn

The graph shown is smooth, rises throughout, has a level crossing at (4, 6), and has opposite ends. Find the number of turning points and the least polynomial degree consistent with these features.

What it asks. The graph shown is smooth, rises throughout, has a level crossing at (4, 6), and has opposite ends. Find the number of turning points and the least polynomial degree consistent with these features.

level crossing246−4481216
The same picture again: y = (x − 4)3 + 6.
Show the steps and the answer

The plan. Count direction changes first. Then ask whether a line could have the visible shape.

  1. Plan. Count direction changes first. Then ask whether a line could have the visible shape.
  2. Count direction changes first. Then ask whether a line could have the visible shape.
  1. There are 0 turning points.The graph rises before and after its level spot, so it never switches direction.
  2. The turn count gives n≥0+1=1.This is a lower bound from turns alone.
  3. Degree 1 is impossible because the graph is curved and has a level spot.A nonconstant degree-1 polynomial is a straight line with the same nonzero slope everywhere.
  4. Opposite ends require odd degree. The least remaining choice is 3.Degree 2 has matching ends. The cubic (x − 4)3 + 6 has all the stated features.
Answer
  • Turning points: 0
  • Least possible degree: 3
Double-check For (x − 4)3 + 6, inputs 3, 4 and 5 give 5, 6 and 7. The cube increases through 4 without turning. Its leading term x3 gives the opposite ends.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Zero turning points mean the graph has degree 1.
A monotone cubic has no turns but is curved.
✓ Instead: Zero turns give a lower bound of 1. The visible shape may require a higher degree.
Tips and tricks
  • For an exam, practice this method with the answer folded. Check each step against the reason beside it.

5 How

  1. Use the turning-point definition on the graph described in the example. Read left to right: falling changes to rising at (−2, −13), rising changes to falling at (0, 3), and falling changes to rising at (2, −13). Count these direction changes, not the ends or a flat spot that keeps rising.
  2. Count t = 3 turns. Apply the bound t ≤ n − 1: 3 ≤ n − 1 gives n ≥ 4 after adding 1 to both sides. This is a lower bound, because a degree can allow more turns than a graph actually has.
  3. Use the end-behavior rule from the earlier lesson. Both ends point up, so the degree is even and the leading coefficient is positive. The smallest even degree allowed by the turn count is 4.
  4. Check that degree 4 can fit the stated shape with the example’s formula f(x) = x4 − 8x2 + 3. Its degree is 4 and its leading coefficient 1 is positive, so it allows at most 3 turns and both arms point up. Multiplying out (x2 − 4)2 − 13 gives x4 − 8x2 + 16 − 13 = x4 − 8x2 + 3, so f(x) = (x2 − 4)2 − 13. A square is never negative and is 0 only where x2 − 4 = 0, at x = −2 and x = 2, so the lowest outputs are −13 there. Between them, x2 − 4 runs from 0 down to −4 at x = 0 and back to 0, so its square climbs from 0 to 16 and falls back: the graph rises to (0, 3) and falls again. Outside −2 and 2 the square only grows, so both arms rise.
  5. Finish the check by substitution: f(−2) = 16 − 32 + 3 = −13, f(0) = 3 and f(2) = 16 − 32 + 3 = −13. This degree-4 polynomial has the three stated turns and both arms up, so degree 4 is possible as well as being the lower bound.

Bounding the degree from a graph

1
Do you have the formula?
YesFind the degree n. If n is 1 or more, the graph has at most n − 1 turning points; a constant has none. You are done.
NoYou have a graph. Go on.
↓
2
At this spot, does the graph switch between rising and falling?
YesCount it as a turning point.
NoDo not count it. A level spot that keeps going the same way is not a turning point, and neither is a crossing of the x-axis where the graph keeps rising or keeps falling.
↓
3
Have you traced the whole graph and counted t turning points?
YesThe degree is at least t + 1, unless the graph is a flat line.
NoKeep tracing to the right.
↓
4
Do both arms point the same way?
YesThe degree is even, so t should be odd. If it is not, recount, and look for turns outside the picture.
NoThe degree is odd, so t should be even (zero counts as even). If it is not, recount, and look for turns outside the picture.
  1. Trace the graph left to right with a finger or a pencil tip.
  2. Mark every peak (rising, then falling) and every valley (falling, then rising).
  3. Count the marks. Call the count t.
  4. Add 1 to t for a lower bound. Check the whole graph before naming the least degree: curvature or a level crossing can rule out a line.
  5. Use the end behavior to check the degree parity. If the question gives only turns and end directions, report the least degree those clues allow.
  6. Read the right arm: up means a positive leading coefficient, down means a negative one.

6 Worked example

Worked example

Bound the degree from a graph with three turning points

A polynomial f has this graph, read left to right: it comes down from the upper left to a valley at (−2, −13), climbs to a peak at (0, 3), drops to a valley at (2, −13), and then climbs to the upper right forever. The table lists seven points on the graph. How many turning points does the graph have? What is the least possible degree of f? Is the leading coefficient positive or negative?

input xoutput f(x)−312−2−13−1−4031−42−13312
x:−3,−2,−1,0,1,2,3;f(x):12,−13,−4,3,−4,−13,12.
Show the steps and the answer
input xoutput f(x)−312−2−13−1−4031−42−13312↓ evaluate: input given, read the output below it
The outputs fall, rise, fall and rise again: the three marked columns are where the direction switches.
  1. Say what is asked. Count the places where the graph turns around, use that count to find the smallest degree the polynomial could have, then read the sign of the leading coefficient from the arms.The rule connects the number of turning points to the degree, so the count comes first.
  2. Trace left to right. In the table the outputs fall from 12 (the column under −3) to −13 (the column under −2), then rise to −4 and 3. The graph switches from falling to rising at (−2,−13). Mark it: a valley.A turning point is a place where falling changes to rising, or rising changes to falling.
  3. Keep tracing. The outputs rise to 3 (the column under 0), then fall to −4 and −13. The graph switches from rising to falling at (0, 3). Mark it: a peak.Rising, then falling, is the other kind of turning point.
  4. Keep tracing. The outputs fall to −13 (the column under 2), then rise to 12 (the column under 3) and keep rising. The graph switches from falling to rising at (2,−13). Mark it: a valley.Every switch counts, including a second valley at the same height as the first.
  5. Count the marks: t=3 turning points.There are three switches of direction and no others. The two arms are not turning points, because the graph does not turn around there.
  6. Use the rule backward. A degree n allows at most n−1 turning points, so 3≤n−1. Add 1 to both sides: 4≤n. This step finds the smallest degree that has room for 3 turning points: the degree is at least 4.Adding the same number to both sides of an inequality keeps it true.
  7. Read the arms. The left arm points up and the right arm points up. Arms pointing the same way mean an even degree, and a right arm pointing up means a positive leading coefficient.End behavior comes from the leading term: an even power with a positive coefficient is large and positive at both ends.
  8. Put the two facts together. The degree is at least 4 and it is even, so the least possible degree is 4, and it cannot be 5.The graph shows how many turning points the formula must allow, and 4 is the smallest even degree with room for three.
Answer
  • Turning points: 3, at (−2, −13), (0, 3) and (2, −13).
  • Least possible degree: 4 (the degree is even and at least 4).
  • Leading coefficient: positive.
Double-check Second way: try the small degrees one at a time. Degree 1 allows 0 turning points, degree 2 allows 1, degree 3 allows 2. None has room for 3. Degree 4 allows 3, so 4 is the smallest that works. To see that degree 4 really can do it, test f(x) = x4 − 8x2 + 3 against the table: f(−2) = 16 − 32 + 3 = −13, f(0) = 3, f(3) = 81 − 72 + 3 = 12. All three match.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 9

The limit from a formula

At most how many turning points can the graph of g(x) = 7x5 − 2x3 + x − 9 have?

Show the steps and the answer
  1. Say what is asked: find the degree, then subtract 1 to get the largest number of turning points the graph could have.The rule goes from the degree to a limit on turning points.
  2. Find the degree. The powers of x are 5, 3 and 1, and the constant −9 has no x. The highest power is 5, so n=5.The degree is the highest power of x in the polynomial.
  3. Subtract 1: n−1=5−1=4.A polynomial of degree n has at most n − 1 turning points.
Answer
At most 4 turning points.
Double-check Count up from the parabola: degree 2 allows 1, degree 3 allows 2, degree 4 allows 3, degree 5 allows 4. Same answer. The graph may have fewer than 4, but never more.

Rung 2 of 9

The degree is hidden in factors

At most how many turning points can the graph of h(x) = −2x(x − 3)(x + 1)2 have?

Show the steps and the answer
  1. Say what is asked: find the degree of h, then subtract 1.The limit on turning points is the degree minus 1, so the degree is needed first.
  2. Find the highest power each factor contributes: −2x contributes x, (x−3) contributes x, and (x+1)2 contributes x2.When the factors are multiplied out, the highest power comes from multiplying the highest power in each factor.
  3. Multiply them: x·x·x2=x4. The leading term is −2x4, so the degree is 4.Multiplying powers of x adds the exponents: 1 + 1 + 2 = 4.
  4. Subtract 1: 4−1=3.A polynomial of degree 4 has at most 4 − 1 turning points.
Answer
At most 3 turning points.
Double-check Multiply it out. (x + 1)2 = x2 + 2x + 1, and x(x − 3) = x2 − 3x. Then (x2 − 3x)(x2 + 2x + 1) = x4 + 2x3 + x2 − 3x3 − 6x2 − 3x = x4 − x3 − 5x2 − 3x. Times −2: h(x) = −2x4 + 2x3 + 10x2 + 6x. The highest power is 4, so the degree is 4 and the limit is 3. A spot check at x = 1: the factored form gives −2 · 1 · (−2) · 4 = 16, and the expanded form gives −2 + 2 + 10 + 6 = 16.

Rung 3 of 9

Two turning points on a graph

A polynomial's graph, read left to right, comes up from the lower left to a peak at (−1, 7), falls to a valley at (2, −20), and then rises to the upper right forever. The table lists seven points on it. What is the least possible degree?

input xoutput f(x)−2−4−17001−132−203−9432
x:−2,−1,0,1,2,3,4;f(x):−4,7,0,−13,−20,−9,32.
Show the steps and the answer
input xoutput f(x)−2−4−17001−132−203−9432↓ evaluate: input given, read the output below it
The outputs rise to 7, fall to −20, then rise again: the two marked columns are the two turning points.
  1. Say what is asked: count the turning points, then find the smallest degree that allows that many.A graph gives the count, and the count gives the least degree.
  2. Trace left to right. The outputs rise from −4 (the column under −2) to 7 (the column under −1), then fall. The switch from rising to falling at (−1,7) is a peak. Mark it.Rising, then falling, is a turning point.
  3. Keep tracing. The outputs fall through 0 and −13 to −20 (the column under 2), then rise to −9 and 32. The switch from falling to rising at (2,−20) is a valley. Mark it.Falling, then rising, is a turning point. Passing through 0 on the way down is a crossing of the x-axis, not a turn.
  4. Count: t=2. Add 1: the degree is at least 2+1=3.A graph with t turning points has degree at least t + 1.
Answer
Least possible degree: 3.
Double-check Use the arms. The left arm points down and the right arm points up. Arms pointing opposite ways mean an odd degree, and 3 is odd, so the two readings agree. A real degree 3 polynomial fits the table: f(x) = 2x3 − 3x2 − 12x gives f(−1) = −2 − 3 + 12 = 7 and f(2) = 16 − 12 − 24 = −20.

Rung 4 of 9

Can this degree draw this graph?

A polynomial graph has 4 turning points. Someone says the polynomial has degree 4. Can that be right?

Show the steps and the answer
  1. Say what is asked: decide whether a degree of 4 has room for 4 turning points.The degree sets a limit, so compare the count with the limit.
  2. Find the limit for degree 4: 4−1=3 turning points.A polynomial of degree n has at most n − 1 turning points.
  3. Compare. The graph has 4 turning points, and 4 is more than 3. Degree 4 cannot draw this graph.At most 3 means 3 or fewer.
  4. Find the smallest degree that can: t+1=4+1=5.A graph with t turning points has degree at least t + 1.
Answer
  • No. Degree 4 allows at most 3 turning points.
  • The degree is at least 5.
Double-check Use the arms. With 4 switches of direction the graph ends going the same direction it started: rising, falling, rising, falling, rising. Starting and ending in the same direction means the arms point opposite ways, which means an odd degree. 4 is even, so it is ruled out a second way, and 5 is odd.

Rung 5 of 9

Turning points and x-intercepts disagree

A polynomial's graph rises from the lower left to a peak at (−1, 4), dips to a valley at (0, 3), rises to a second peak at (1, 4), and then falls to the lower right forever. It crosses the x-axis only twice. The table lists five points on it. Find the least possible degree, say whether the degree is even or odd, and give the sign of the leading coefficient.

input xoutput f(x)−2−5−1403142−5
x:−2,−1,0,1,2;f(x):−5,4,3,4,−5.
Show the steps and the answer
input xoutput f(x)−2−5−1403142−5↓ evaluate: input given, read the output below it
The outputs go up, down, up, down.
  1. Say what is asked: count the turning points to get the least degree, then use the arms to decide even or odd and the sign of the leading coefficient.Turning points bound the degree, and end behavior gives the rest.
  2. Trace and mark. Rising to (−1,4), then falling: a peak. Falling to (0, 3), then rising: a valley. Rising to (1, 4), then falling: a peak. In the output row of the table: −5, 4, 3, 4, −5.Each switch between rising and falling is a turning point.
  3. Count: t=3. The valley at (0, 3) counts even though it is shallow and sits above the x-axis.A turning point is about the direction changing, not about how deep the dip is or whether it reaches the x-axis.
  4. Add 1: the degree is at least 3+1=4.A graph with t turning points has degree at least t + 1.
  5. Set aside the tempting count. Two x-intercepts might suggest degree 2, but a degree 2 polynomial allows only 2−1=1 turning point, and this graph has 3.The number of x-intercepts can be smaller than the degree, so it cannot be used to pin the degree down here.
  6. Read the arms. Both arms point down. Arms pointing the same way mean an even degree, and a right arm pointing down means a negative leading coefficient.An even power with a negative coefficient is large and negative at both ends.
Answer
  • Least possible degree: 4.
  • The degree is even.
  • The leading coefficient is negative.
Double-check The polynomial f(x) = −x4 + 2x2 + 3 fits every column of the table: f(−2) = −16 + 8 + 3 = −5, f(−1) = −1 + 2 + 3 = 4, f(0) = 3, f(1) = −1 + 2 + 3 = 4, f(2) = −16 + 8 + 3 = −5. Its degree is 4 and its leading coefficient is −1, as predicted. Also, both arms down means the graph starts rising and ends falling, which takes an odd number of switches, and 3 is odd.

Rung 6 of 9

Check a graph with a missing input

The graph shown follows y = 7x − 13 except that the open circle at (3, 8) is missing. Could it be a polynomial graph? Explain.

What it asks. The graph shown follows y = 7x − 13 except that the open circle at (3, 8) is missing. Could it be a polynomial graph? Explain.

missing point246−881624
The open circle removes one input from an otherwise straight graph.
Show the steps and the answer

The plan. A straight shape alone is not enough. Check whether any input is missing.

  1. Plan. A straight shape alone is not enough. Check whether any input is missing.
  2. A straight shape alone is not enough. Check whether any input is missing.
  1. There is no output at x=3.An open circle marks a point left out of the graph.
  2. It cannot be a polynomial function on its stated domain.A polynomial is defined and continuous at every real input; the hole violates that requirement.
Answer
No. The missing input rules out a polynomial function.
Double-check The complete line gives 7 · 3 − 13 = 8. A second check uses the neighboring points (2, 1) and (4, 15): their midpoint is (3, 8). The function in the question omits that point.

Rung 7 of 9

Check a graph with separated branches

The graph shown has two branches, with no output at x = 3. The heights grow without bound beside that line. Could it be a polynomial graph? Explain.

What it asks. The graph shown has two branches, with no output at x = 3. The heights grow without bound beside that line. Could it be a polynomial graph? Explain.

246−8−44812
The branches approach x = 3 without giving that input an output.
Show the steps and the answer

The plan. Check whether the branches join at every input. A polynomial cannot shoot to infinity at a finite input.

  1. Plan. Check whether the branches join at every input. A polynomial cannot shoot to infinity at a finite input.
  2. Check whether the branches join at every input. A polynomial cannot shoot to infinity at a finite input.
  1. The branches do not join at x=3.The graph has no finite value at that input.
  2. It cannot be a polynomial graph.Polynomials have a finite value at every finite real input and have no gaps or vertical asymptotes.
Answer
No. The missing input and vertical asymptote rule out a polynomial.
Double-check The drawing is y = 2/(x − 3) + 1. At x = 2.9 the output is −19; at x = 3.1 it is 21. At x = 3 division by zero is undefined.

Rung 8 of 9

Read a line from its graph

The graph shown is a nonconstant straight line that falls throughout. Find its turning points and least possible polynomial degree.

What it asks. The graph shown is a nonconstant straight line that falls throughout. Find its turning points and least possible polynomial degree.

(0, 2)(1, −1)−22−8−44812
This graph falls at a constant rate and has no turning point.
Show the steps and the answer

The plan. Unlike a curved flat crossing, a straight nonhorizontal line fits degree 1.

  1. Plan. Unlike a curved flat crossing, a straight nonhorizontal line fits degree 1.
  2. Unlike a curved flat crossing, a straight nonhorizontal line fits degree 1.
  1. It has 0 turning points.It never switches from falling to rising.
  2. The least possible degree is 1.A nonconstant line has the form mx + b with m ≠ 0, which has degree 1. A constant would be horizontal.
Answer
  • Turning points: 0
  • Least possible degree: 1
Double-check The drawing is y = −3x + 2. The points (0, 2) and (1, −1) give slope (−1 − 2)/(1 − 0) = −3; the same slope applies everywhere.

Rung 9 of 9

Read a falling curve from its graph

The graph shown is smooth, curved and falling throughout. It levels at (−3, 2) without turning, and its ends point opposite ways. Find its turning points and least possible polynomial degree.

What it asks. The graph shown is smooth, curved and falling throughout. It levels at (−3, 2) without turning, and its ends point opposite ways. Find its turning points and least possible polynomial degree.

level crossing−4−2−8−44812
The graph flattens at (−3, 2) and keeps falling.
Show the steps and the answer

The plan. Do not count a flat spot as a turn. Do use it to rule out a straight line.

  1. Plan. Do not count a flat spot as a turn. Do use it to rule out a straight line.
  2. Do not count a flat spot as a turn. Do use it to rule out a straight line.
  1. It has 0 turning points.Falling continues on both sides of the level spot.
  2. The count gives degree at least 1, but the curved shape excludes degree 1.A degree-1 graph has constant slope and cannot flatten at one isolated point.
  3. The least possible degree is 3.The opposite ends need odd degree, and degree 3 is the smallest odd choice after 1.
Answer
  • Turning points: 0
  • Least possible degree: 3
Double-check The polynomial −2(x + 3)3 + 2 fits. At x = −4, −3 and −2 it gives 4, 2 and 0. Its leading term −2x3 gives left end up and right end down.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: f(x) = x3 has degree 3, so its graph has 2 turning points.
The rule gives a limit, not a count. The graph of y = x3 climbs the whole way. It levels off for an instant at (0, 0) and keeps climbing, so it never turns around.
✓ Instead: A degree 3 polynomial has at most 2 turning points. y = x3 has 0, and y = x3 − 3x has 2.
✗ Not this: The graph has 3 turning points, so the degree is 3 − 1 = 2.
Subtracting 1 goes from the degree to the turning points. Going the other way, from turning points to the degree, you add 1. A degree 2 graph is a parabola and turns only once.
✓ Instead: 3 turning points mean the degree is at least 3 + 1 = 4.
✗ Not this: The graph crosses the x-axis 3 times, so it has 3 turning points.
x-intercepts and turning points are different things. y = x2 + 1 never touches the x-axis and still has one turning point at (0, 1). y = x3 crosses the x-axis once and has no turning point.
✓ Instead: Count the places where the graph switches between rising and falling. Ignore where it crosses the x-axis.
✗ Not this: The graph has 3 turning points, so the degree is exactly 4.
A higher degree can draw the same number of turns. y = x6 − 3x2 has degree 6 and exactly 3 turning points, at x = −1, x = 0 and x = 1.
✓ Instead: Say 'the degree is at least 4', or 'the least possible degree is 4'.

Tips and tricks

  • Anchor on the parabola. Degree 2, one turning point. If you forget whether the rule is n − 1 or n + 1, picture y = x2: it turns once, and 2 − 1 = 1. This rule can be rebuilt in ten seconds, so there is no need to memorize it as a formula.
  • Forward, subtract for the maximum turns. Backward, add for a degree lower bound. Then use any extra graph features before naming the least degree.
  • Even and odd check, for a polynomial that is not constant: an even degree has an odd number of turning points, and an odd degree has an even number (zero counts as even). If the turns you see and the arms disagree, recount, and look for turns outside the picture.
  • Trace with a finger, left to right, and say 'up' or 'down' as you go. Each time the word changes, you passed a turning point.
  • A graph shows one window. Turning points can hide outside it, so a graph gives the least possible degree, never the exact degree.
  • Other names you will see: a peak is called a local maximum and a valley is called a local minimum. 'Local' means highest or lowest compared with the points right around it, not on the whole graph.

7 The trap

Reading 'at most' as 'exactly'. A degree 3 polynomial does not have to have 2 turning points: y = x3 has none. A graph with 3 turning points does not have to come from degree 4: it could come from degree 6. Going from a formula of degree 1 or more, say 'at most n − 1 turning points'. Going from a graph that is not a flat line, say 'degree at least t + 1'.

Keep in mind

  • Exam skills: rule out graphs with corners, gaps or vertical asymptotes; count turns on graphs that can be polynomials.
  • Use turns for a lower bound on degree. Then check the ends and visible shape before naming the least degree.

Flash cards

Say the answer out loud, then flip.

On the hiking trail picture, what is a turning point?
  • A spot where the graph turns around, read left to right.
  • A hilltop: climbing switches to going down.
  • The bottom of a dip: going down switches to climbing.
A polynomial has degree 6. How many turning points can its graph have?
  • At most 5, because the limit is n − 1 and 6 − 1 = 5.
  • It can have fewer. The rule says at most, not exactly.
You trace a polynomial graph and count 4 turning points. What does that say about the degree?
  • The degree is at least 5, because t + 1 = 4 + 1 = 5.
  • 5 is the least possible degree. The real degree could be higher.
When you count turning points on a graph, which spots do you leave out?
  • The two arms.
  • Any level spot where the graph keeps going the same way, like the flat spot on y = x3, which has no turning points.

Sources

  1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.