Quarry School

Graphs of the other four functions — quick review

Four formulas and the inputs they must skip

In plain words

Think of four number machines that all begin with the same angle.

Rule

Rule: tan x = sinxcosx; cot x = cosxsinx; sec x = 1cosx; csc x = 1sinx.
For tan and sec, require x ≠ π2 + nπ; for cot and csc, require x ≠ nπ, with n any integer.

Step

  1. 1. Write the formula as a fraction because the denominator identifies the restriction.

  2. 2. Set the denominator equal to 0 to find the inputs that would make the division impossible.

  3. 3. Read those angles from the unit circle and substitute them back into the denominator to verify it is 0.

  4. 4. Exclude those inputs. Keep a zero numerator when the denominator is nonzero.

Question

In plain words, use one angle to decide which machines have a number to return. Find tan, cot, sec and csc at x = π2.

Answer

tan(π2): undefined.
cot(π2): 0.
sec(π2): undefined.
csc(π2): 1.

Trap

A zero on the top is not a break. Check the bottom first: 01 = 0, while 10 is undefined.

Strategy

  1. 1. Identify the denominator in the quotient or reciprocal formula.

  2. 2. Set that denominator equal to 0 to locate failures.

  3. 3. Find the full integer family and check a member in the denominator.

  4. 4. Exclude that family while keeping valid zero outputs.

  5. 5. To list forbidden inputs inside an interval, put the angle family between the two given bounds. Divide all parts by positive π, then subtract 12 from all parts if the family is π2 + nπ. Keep every integer between the resulting bounds on n. This finds exactly the family members inside the requested interval, even if the interval is far from zero. For [−π, 3π] and the cosine-zero family, this gives −32 ≤ n ≤ 52, so n = −1, 0, 1, 2. Compare the coefficients of π to check neighbors: −3π2 = −1.5π < −π.

Term

Tangent

Definition

Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.

Term

Cotangent

Definition

Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.

Term

Secant

Definition

One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.

Term

Cosecant

Definition

One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.

Term

Sine

Definition

The vertical coordinate of the unit-circle point for an angle.

Term

Cosine

Definition

The horizontal coordinate of the unit-circle point for an angle.

Term

Unit circle

Definition

A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).

Term

Quadrantal angle

Definition

An angle whose terminal side lies on an axis. It is an integer multiple of π2 radians, equivalently an integer multiple of 90°.

Term

Integer

Definition

A whole count, including positive counts, negative counts and zero.

Term

Domain

Definition

The set of inputs for which a function has an output.

Term

Undefined

Definition

No output exists at that input. Here the formula would divide by zero.

Term

Numerator

Definition

The top of a fraction, the amount being divided.

Term

Denominator

Definition

The bottom of a fraction, the number you divide by. It must be nonzero.

Term

Zero

Definition

For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

Term

Reciprocal

Definition

One divided by a nonzero number. A number times its reciprocal equals 1.

Term

Reciprocal identities

Definition

Equalities linking sine with cosecant and cosine with secant. Cotangent and tangent are reciprocal partners wherever both sides are defined.

Term

Quotient identities

Definition

The formulas tan x = sine divided by cosine and cot x = cosine divided by sine, with nonzero denominators.

Term

Coordinate

Definition

One number in a point's address, recording a horizontal or vertical position.

Term

x-coordinate

Definition

The first coordinate of a point. On a function graph it gives the input's horizontal position.

Range: the output heights each graph can reach

In plain words

Imagine the graph shining a light sideways onto a wall.

Rule

Rule: tan x and cot x have range (−∞, ∞). sec x and csc x have range (−∞, −1] ∪ [1, ∞), meaning y ≤ −1 or y ≥ 1.

Step

  1. 1. Identify whether you have a quotient function or a reciprocal-of-sine-or-cosine function.

  2. 2. For tangent or cotangent, accept any real output because every height occurs.

  3. 3. For secant or cosecant, keep outputs at or below −1 and at or above 1.

  4. 4. Include −1 and 1; exclude only the open middle band −1 < y < 1.

Question

In plain words, check four proposed heights against the range. Decide whether sec x can equal 1, −2, 0 or 12.

Answer

1: possible.
−2: possible.
0: impossible.
12: impossible.

Trap

Excluding ±1 along with the middle band. The gap is open: −1 < y < 1. At the edges, reciprocal values are still ±1.

Strategy

  1. 1. Read which function the output belongs to.

  2. 2. Apply the all-real quotient range or the two-band reciprocal range.

  3. 3. For a reciprocal candidate, optionally flip it back and check the required sine or cosine.

  4. 4. Include allowed endpoints and explain rejections.

Term

Tangent

Definition

Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.

Term

Cotangent

Definition

Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.

Term

Secant

Definition

One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.

Term

Cosecant

Definition

One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.

Term

Sine

Definition

The vertical coordinate of the unit-circle point for an angle.

Term

Cosine

Definition

The horizontal coordinate of the unit-circle point for an angle.

Term

Unit circle

Definition

A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).

Term

Domain

Definition

The set of inputs for which a function has an output.

Term

Range

Definition

The set of output values a function actually reaches.

Term

Real number

Definition

A number on the ordinary number line, including integers, fractions and square roots of nonnegative numbers.

Term

Numerator

Definition

The top of a fraction, the amount being divided.

Term

Denominator

Definition

The bottom of a fraction, the number you divide by. It must be nonzero.

Term

Zero

Definition

For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

Term

Reciprocal

Definition

One divided by a nonzero number. A number times its reciprocal equals 1.

Term

Unbounded

Definition

Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.

Term

Infinity

Definition

A symbol describing unlimited continuation, not a real output or an included endpoint.

Term

x-axis

Definition

The horizontal coordinate line, whose points have output coordinate y = 0.

Term

y-axis

Definition

The vertical coordinate line, whose points have input coordinate x = 0.

Term

Union

Definition

Joining two sets: a value in either set is allowed. The symbol is ∪.

Term

Amplitude

Definition

A finite half-height between a bounded wave's highest and lowest outputs. None of these four whole graphs has a finite amplitude.

Term

Coordinate

Definition

One number in a point's address, recording a horizontal or vertical position.

Term

Magnitude

Definition

A number's distance from zero, ignoring its sign.

Term

Ratio

Definition

One number compared with another by division, with a nonzero divisor.

Term

Reflection

Definition

A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.

Term

Radius

Definition

The distance from a circle's center to any point on its rim.

Even and odd: how the picture balances

In plain words

Hold a paper graph up to a mirror along the vertical axis.

Rule

Rule: sec(−x) = sec x is even, with y-axis symmetry. tan(−x) = −tan x, cot(−x) = −cot x and csc(−x) = −csc x are odd, with origin symmetry. In each identity, x and −x must both be allowed inputs.

Step

  1. 1. Check that the input is allowed before using symmetry.

  2. 2. If the function is secant, negate the input and keep the output height.

  3. 3. If it is tangent, cotangent or cosecant, negate both input and output.

  4. 4. On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.

Question

In plain words, predict the heights at the mirror input without rebuilding the circle each time. Find sec(−π4) and tan(−π4) using the positive-angle values.

Answer

sec(−π4) = 2.
tan(−π4) = −1.

Trap

Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.

Strategy

  1. 1. Find the function's even or odd rule.

  2. 2. Verify that the input and its opposite are allowed.

  3. 3. Keep the output for even symmetry; reverse it for odd symmetry.

  4. 4. Check the matching coordinates on the graph.

Term

Tangent

Definition

Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.

Term

Cotangent

Definition

Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.

Term

Secant

Definition

One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.

Term

Cosecant

Definition

One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.

Term

Sine

Definition

The vertical coordinate of the unit-circle point for an angle.

Term

Cosine

Definition

The horizontal coordinate of the unit-circle point for an angle.

Term

Integer

Definition

A whole count, including positive counts, negative counts and zero.

Term

Domain

Definition

The set of inputs for which a function has an output.

Term

Undefined

Definition

No output exists at that input. Here the formula would divide by zero.

Term

Denominator

Definition

The bottom of a fraction, the number you divide by. It must be nonzero.

Term

Zero

Definition

For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

Term

Reciprocal

Definition

One divided by a nonzero number. A number times its reciprocal equals 1.

Term

Even function

Definition

A function whose domain includes opposite inputs together and has f(−x) = f(x). Its graph has y-axis symmetry.

Term

Odd function

Definition

A function whose domain includes opposite inputs together and has f(−x) = −f(x). Its graph has origin symmetry.

Term

Symmetry

Definition

A picture matches itself after a specified reflection or rotation.

Term

With respect to (w.r.t.)

Definition

In relation to a specified reference. For symmetry, it names the axis or point used.

Term

x-axis

Definition

The horizontal coordinate line, whose points have output coordinate y = 0.

Term

y-axis

Definition

The vertical coordinate line, whose points have input coordinate x = 0.

Term

Origin

Definition

The crossing of the axes, with coordinates (0, 0).

Term

Function notation

Definition

A name followed by an input in parentheses, recording the output of that rule at that input.

Term

Reflection

Definition

A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.

Period: copy the right-sized piece

In plain words

Think of a repeating wallpaper strip.

Rule

Rule: tan(x + π) = tan x and cot(x + π) = cot x. sec(x + 2π) = sec x and csc(x + 2π) = csc x. Their fundamental periods are π, π, 2π and 2π respectively.

Step

  1. 1. Select π for tangent or cotangent and 2π for secant or cosecant.

  2. 2. Sketch a complete piece of that width, keeping excluded endpoints out of the graph.

  3. 3. Copy its points and breaks left and right by integer multiples of the period.

  4. 4. For an exact value, add or subtract complete periods to reach a known allowed input.

Question

In plain words, remove complete repeating pieces until each input is an angle you know. Find tan(9π4) and csc(5π2).

Answer

tan(9π4) = 1.
csc(5π2) = 1.

Trap

Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.

Strategy

  1. 1. Read the function name and choose its fundamental period.

  2. 2. Find a familiar allowed input by adding or subtracting an integer number of periods.

  3. 3. Check the reduced input in the denominator.

  4. 4. Evaluate there or copy the entire graph piece, including its breaks.

Term

Tangent

Definition

Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.

Term

Cotangent

Definition

Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.

Term

Secant

Definition

One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.

Term

Cosecant

Definition

One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.

Term

Sine

Definition

The vertical coordinate of the unit-circle point for an angle.

Term

Cosine

Definition

The horizontal coordinate of the unit-circle point for an angle.

Term

Integer

Definition

A whole count, including positive counts, negative counts and zero.

Term

Domain

Definition

The set of inputs for which a function has an output.

Term

Undefined

Definition

No output exists at that input. Here the formula would divide by zero.

Term

Numerator

Definition

The top of a fraction, the amount being divided.

Term

Denominator

Definition

The bottom of a fraction, the number you divide by. It must be nonzero.

Term

Zero

Definition

For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

Term

Reciprocal

Definition

One divided by a nonzero number. A number times its reciprocal equals 1.

Term

Branch

Definition

One connected piece of a graph. Here consecutive asymptotes bound each branch.

Term

Period

Definition

A positive horizontal input distance after which the whole pattern repeats.

Term

Fundamental period

Definition

The smallest positive period of a function.

Term

Periodic function

Definition

A function whose outputs and allowed-input pattern repeat after a fixed positive input distance.

Term

Coordinate

Definition

One number in a point's address, recording a horizontal or vertical position.

Term

Ratio

Definition

One number compared with another by division, with a nonzero divisor.

Term

Ray

Definition

A line that starts at one point and extends without end in one direction.

Term

Quadrant

Definition

One of the four regions between the coordinate axes, numbered counterclockwise from upper right.

Term

Reflection

Definition

A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.

Tangent and the meaning of a vertical asymptote

In plain words

Imagine walking along a ramp that climbs beside a tall fence.

Rule

Rule: tan x = sinxcosx, with x ≠ π2 + nπ for every integer n. The vertical asymptotes are x = π2 + nπ.
Each branch is continuous and increasing; the central branch is on (−π2, π2) and the pattern repeats every π.

Step

  1. 1. Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.

  2. 2. For the central branch, use x = −π2 and x = π2. Check cos(−π2) = 0 and cos(π2) = 0 before drawing the dashed vertical lines.

  3. 3. Plot (−π4, −1), (0, 0), and (π4, 1), using the exact unit-circle values in the worked example's three-column table.

  4. 4. Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.

  5. 5. Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.

Rule

Rule: a vertical asymptote x = c has unbounded nearby output behavior on at least one side. For these parent trigonometric functions, the denominator is zero at c and the input c is excluded.

Question

Explain tangent at π2, at 1.56, and at 1.58 radians. This asks you to separate the excluded input from accepted inputs on either side of it.

Answer

tan(π2) is undefined.
tan(1.56) ≈ 92.6205, on the left.
tan(1.58) ≈ −108.6492, on the right.

Rule

Rule: on −π2 < x < π2, tangent is continuous and increasing, with key points (−π4, −1), (0, 0), and (π4, 1).

Rule

Rule: tan(x + π) = tan x whenever tangent is defined. Copy the central branch by integer multiples of π; the boundary lines become x = π2 + nπ.

Strategy

  1. Find and check the zeros of cosine to locate excluded inputs.

  2. Draw two consecutive boundary lines and mark the zero halfway between them.

  3. Use quarter-π offsets from that zero to place heights −1 and 1.

  4. Draw one continuous rising branch, then repeat it every π.

Trap

Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.

Term

Tangent

Definition

Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.

Term

Sine

Definition

The vertical coordinate of the unit-circle point for an angle.

Term

Cosine

Definition

The horizontal coordinate of the unit-circle point for an angle.

Term

Unit circle

Definition

A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).

Term

Radian

Definition

An angle unit based on arc length divided by radius. A half-turn is π radians, equal to 180°.

Term

Integer

Definition

A whole count, including positive counts, negative counts and zero.

Term

Multiple

Definition

A number obtained by multiplying a given number by an integer.

Term

Domain

Definition

The set of inputs for which a function has an output.

Term

Real number

Definition

A number on the ordinary number line, including integers, fractions and square roots of nonnegative numbers.

Term

Undefined

Definition

No output exists at that input. Here the formula would divide by zero.

Term

Numerator

Definition

The top of a fraction, the amount being divided.

Term

Denominator

Definition

The bottom of a fraction, the number you divide by. It must be nonzero.

Term

Zero

Definition

For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

Term

x-intercept

Definition

A graph point on the horizontal axis, where the output is zero.

Term

y-intercept

Definition

A graph point on the vertical axis, where the input is zero.

Term

Vertical asymptote

Definition

A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.

Term

Not continuous (discontinuous)

Definition

A graph with a break. These four full graphs have breaks at excluded angles, while each branch is continuous.

Term

Continuous

Definition

Having no break within an allowed interval. Each branch here is continuous even though excluded inputs separate branches.

Term

Branch

Definition

One connected piece of a graph. Here consecutive asymptotes bound each branch.

Term

Unbounded

Definition

Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.

Term

Infinity

Definition

A symbol describing unlimited continuation, not a real output or an included endpoint.

Term

Period

Definition

A positive horizontal input distance after which the whole pattern repeats.

Term

Symmetry

Definition

A picture matches itself after a specified reflection or rotation.

Term

Origin

Definition

The crossing of the axes, with coordinates (0, 0).

Term

Increasing

Definition

Within an interval, a larger input gives a larger output.

Term

One-sided approach

Definition

Moving toward an input while keeping every nearby input entirely on its left or entirely on its right.

Term

Coordinate

Definition

One number in a point's address, recording a horizontal or vertical position.

Term

Magnitude

Definition

A number's distance from zero, ignoring its sign.

Term

Ratio

Definition

One number compared with another by division, with a nonzero divisor.

Term

Ray

Definition

A line that starts at one point and extends without end in one direction.

Term

Quadrant

Definition

One of the four regions between the coordinate axes, numbered counterclockwise from upper right.

Cotangent: the branch that falls

In plain words

Picture a road that descends between two closed gates.

Rule

Rule: cot x = cosxsinx, with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ and its period is π.
On (0, π), the continuous decreasing branch passes through (π4, 1), (π2, 0), and (3π4, −1).

Step

  1. 1. Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.

  2. 2. For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.

  3. 3. Read the three table columns to plot (π4, 1), (π2, 0), and (3π4, −1).

  4. 4. Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.

  5. 5. Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.

Strategy

  1. Locate and check the sine zeros to draw boundary lines at consecutive multiples of π.

  2. Mark the zero halfway between the boundaries.

  3. Mark height 1 one quarter-period after the left boundary and height −1 one quarter-period before the right boundary.

  4. Draw the falling continuous branch, then copy it every π.

Question

Graph the branch of y = cot x that passes through the point (3π2, 0), then extend the graph using the period. The three-column table gives exact values on this branch: cot(4π3) = 33, cot(3π2) = 0 and cot(5π3) = −33. The table lists each input as a count of sixths of π, so 8, 9 and 10 stand for 8π6, 9π6 and 10π6. It rounds the outputs to two decimal places: 0.58, 0 and −0.58.

Answer

The branch lies between the dashed asymptotes x = π and x = 2π. It passes through (4π3, 33), (3π2, 0) and (5π3, −33) and falls from left to right. It rises without bound as x approaches π from the right and falls without bound as x approaches 2π from the left. The full graph repeats this branch between x = nπ and x = (n + 1)π for every integer n, with a dashed asymptote at each x = nπ.

Trap

Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at π2 that gives the valid output 0.

Term

Tangent

Definition

Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.

Term

Cotangent

Definition

Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.

Term

Sine

Definition

The vertical coordinate of the unit-circle point for an angle.

Term

Cosine

Definition

The horizontal coordinate of the unit-circle point for an angle.

Term

Radian

Definition

An angle unit based on arc length divided by radius. A half-turn is π radians, equal to 180°.

Term

Integer

Definition

A whole count, including positive counts, negative counts and zero.

Term

Multiple

Definition

A number obtained by multiplying a given number by an integer.

Term

Domain

Definition

The set of inputs for which a function has an output.

Term

Range

Definition

The set of output values a function actually reaches.

Term

Undefined

Definition

No output exists at that input. Here the formula would divide by zero.

Term

Numerator

Definition

The top of a fraction, the amount being divided.

Term

Denominator

Definition

The bottom of a fraction, the number you divide by. It must be nonzero.

Term

Zero

Definition

For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

Term

Reciprocal

Definition

One divided by a nonzero number. A number times its reciprocal equals 1.

Term

Vertical asymptote

Definition

A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.

Term

Continuous

Definition

Having no break within an allowed interval. Each branch here is continuous even though excluded inputs separate branches.

Term

Branch

Definition

One connected piece of a graph. Here consecutive asymptotes bound each branch.

Term

Unbounded

Definition

Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.

Term

Period

Definition

A positive horizontal input distance after which the whole pattern repeats.

Term

Symmetry

Definition

A picture matches itself after a specified reflection or rotation.

Term

Origin

Definition

The crossing of the axes, with coordinates (0, 0).

Term

Amplitude

Definition

A finite half-height between a bounded wave's highest and lowest outputs. None of these four whole graphs has a finite amplitude.

Term

Increasing

Definition

Within an interval, a larger input gives a larger output.

Term

Decreasing

Definition

Within an interval, a larger input gives a smaller output.

Term

Coordinate

Definition

One number in a point's address, recording a horizontal or vertical position.

Term

Ratio

Definition

One number compared with another by division, with a nonzero divisor.

Term

Ray

Definition

A line that starts at one point and extends without end in one direction.

Term

Quadrant

Definition

One of the four regions between the coordinate axes, numbered counterclockwise from upper right.

Cosecant: build a reciprocal graph from sine

In plain words

Imagine a machine that keeps your position along a road but changes the height written on your sign.

Rule

Rule: csc x = 1sinx, with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and csc(−x) = −csc x.

Step

  1. 1. Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.

  2. 2. Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.

  3. 3. Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.

  4. 4. Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.

  5. 5. Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.

Strategy

  1. 1. Find sine's zeros to locate excluded inputs and asymptotes.

  2. 2. Mark the shared points where sine is 1 or −1.

  3. 3. Use one reciprocal point on each side of a shared point to guide the curve.

  4. 4. Keep the sine sign, bend away from the x-axis, and repeat every 2π.

Question

You need the graph pieces across one full turn, including the locations where no point exists. Sketch y = csc x on 0 ≤ x ≤ 2π using sine as the guide.

Answer

Asymptotes in the interval: x = 0, π, 2π.
Positive branch: 0 < x < π, vertex (π2, 1).
Negative branch: π < x < 2π, vertex (3π2, −1).
Repeat the pattern every 2π.

Trap

Trap: taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.

Term

Cosecant

Definition

One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.

Term

Sine

Definition

The vertical coordinate of the unit-circle point for an angle.

Term

Unit circle

Definition

A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).

Term

Integer

Definition

A whole count, including positive counts, negative counts and zero.

Term

Domain

Definition

The set of inputs for which a function has an output.

Term

Range

Definition

The set of output values a function actually reaches.

Term

Undefined

Definition

No output exists at that input. Here the formula would divide by zero.

Term

Numerator

Definition

The top of a fraction, the amount being divided.

Term

Denominator

Definition

The bottom of a fraction, the number you divide by. It must be nonzero.

Term

Zero

Definition

For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

Term

x-intercept

Definition

A graph point on the horizontal axis, where the output is zero.

Term

Reciprocal

Definition

One divided by a nonzero number. A number times its reciprocal equals 1.

Term

Reciprocal graph

Definition

A graph made by keeping each input and replacing every nonzero output y with 1 divided by y.

Term

Vertical asymptote

Definition

A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.

Term

Branch

Definition

One connected piece of a graph. Here consecutive asymptotes bound each branch.

Term

Period

Definition

A positive horizontal input distance after which the whole pattern repeats.

Term

Symmetry

Definition

A picture matches itself after a specified reflection or rotation.

Term

x-axis

Definition

The horizontal coordinate line, whose points have output coordinate y = 0.

Term

Origin

Definition

The crossing of the axes, with coordinates (0, 0).

Term

Union

Definition

Joining two sets: a value in either set is allowed. The symbol is ∪.

Term

Vertex

Definition

An angle's corner, where its rays start, or a reciprocal branch's turning point closest to the x-axis. The surrounding problem tells you which meaning applies.

Term

Coordinate

Definition

One number in a point's address, recording a horizontal or vertical position.

Term

Magnitude

Definition

A number's distance from zero, ignoring its sign.

Term

Reflection

Definition

A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.

Secant: build a reciprocal graph from cosine

In plain words

Think of the same height-changing machine with a different starting drawing.

Rule

Rule: sec x = 1cosx, with x ≠ π2 + nπ for every integer n. Its vertical asymptotes are x = π2 + nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and sec(−x) = sec x.

Step

  1. 1. Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.

  2. 2. Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.

  3. 3. Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.

  4. 4. Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.

  5. 5. Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.

Strategy

  1. 1. Identify cosine zeros, because they are forbidden secant inputs.

  2. 2. Mark cosine's heights 1 and −1 as the secant vertices.

  3. 3. Take reciprocal heights at one or two additional inputs on each branch.

  4. 4. Connect the points with curves facing away from the x-axis and copy the pattern by 2π.

Question

You need one complete positive branch and one complete negative branch. Sketch y = sec x on −π2 ≤ x ≤ 3π2 using cosine as the guide.

Answer

Asymptotes in the interval: x = −π2, π2, 3π2.
Positive branch: −π2 < x < π2, vertex (0, 1).
Negative branch: π2 < x < 3π2, vertex (π, −1).
The interval length and the repeating pattern are 2π.

Trap

Trap: secant uses cosine zeros, which lie at odd multiples of π2. Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.

Term

Secant

Definition

One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.

Term

Cosecant

Definition

One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.

Term

Sine

Definition

The vertical coordinate of the unit-circle point for an angle.

Term

Cosine

Definition

The horizontal coordinate of the unit-circle point for an angle.

Term

Integer

Definition

A whole count, including positive counts, negative counts and zero.

Term

Domain

Definition

The set of inputs for which a function has an output.

Term

Range

Definition

The set of output values a function actually reaches.

Term

Undefined

Definition

No output exists at that input. Here the formula would divide by zero.

Term

Denominator

Definition

The bottom of a fraction, the number you divide by. It must be nonzero.

Term

Zero

Definition

For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

Term

x-intercept

Definition

A graph point on the horizontal axis, where the output is zero.

Term

Reciprocal

Definition

One divided by a nonzero number. A number times its reciprocal equals 1.

Term

Reciprocal graph

Definition

A graph made by keeping each input and replacing every nonzero output y with 1 divided by y.

Term

Vertical asymptote

Definition

A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.

Term

Branch

Definition

One connected piece of a graph. Here consecutive asymptotes bound each branch.

Term

Unbounded

Definition

Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.

Term

Period

Definition

A positive horizontal input distance after which the whole pattern repeats.

Term

Even function

Definition

A function whose domain includes opposite inputs together and has f(−x) = f(x). Its graph has y-axis symmetry.

Term

Symmetry

Definition

A picture matches itself after a specified reflection or rotation.

Term

x-axis

Definition

The horizontal coordinate line, whose points have output coordinate y = 0.

Term

y-axis

Definition

The vertical coordinate line, whose points have input coordinate x = 0.

Term

Origin

Definition

The crossing of the axes, with coordinates (0, 0).

Term

Union

Definition

Joining two sets: a value in either set is allowed. The symbol is ∪.

Term

Vertex

Definition

An angle's corner, where its rays start, or a reciprocal branch's turning point closest to the x-axis. The surrounding problem tells you which meaning applies.

Term

Coordinate

Definition

One number in a point's address, recording a horizontal or vertical position.

Term

Magnitude

Definition

A number's distance from zero, ignoring its sign.

Term

Reflection

Definition

A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.

Read, sketch and remember all four graphs

In plain words

Picture a route map with landmarks and gaps.

Rule

Rule: for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote. Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.

Step

  1. 1. Write the quotient or reciprocal formula.

  2. 2. Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.

  3. 3. Plot the known key points within each allowed branch.

  4. 4. Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.

  5. 5. Repeat by the fundamental period and check the even or odd symmetry and the range.

Question

Graph the branch of y = sec x that passes through the point (2π, 1), then sketch the neighboring downward branch through (3π, −1). Extend the graph using the period and the even symmetry of secant, and state the range. The three-column table gives exact values on the first branch: sec(7π4) = 2, sec(2π) = 1 and sec(9π4) = 2. The table lists each input as a multiple of π, so 1.75, 2 and 2.25 stand for 7π4, 2π and 9π4, and it shows 2 rounded to 1.414.

Answer

The branch through (2π, 1) is an upward U between the vertical asymptotes x = 3π2 and x = 5π2. Its lowest point is (2π, 1), and it passes through (7π4, 2) and (9π4, 2). Beside it is a downward U between x = 5π2 and x = 7π2 with highest point (3π, −1). The graph repeats every 2π, has vertical asymptotes x = π2 + kπ for every integer k, and is symmetric about the y-axis because sec(−x) = sec x. The range is (−∞, −1] ∪ [1, ∞).

Trap

Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.

Strategy

  1. 1. Write its defining formula and find the forbidden denominator-zero inputs.

  2. 2. Substitute into the denominator to confirm every marked asymptote.

  3. 3. Place the known key points and use the correct branch shape.

  4. 4. Repeat by its fundamental period.

  5. 5. Check its range and its even or odd point pairs.

Term

Tangent

Definition

Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.

Term

Cotangent

Definition

Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.

Term

Secant

Definition

One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.

Term

Cosecant

Definition

One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.

Term

Sine

Definition

The vertical coordinate of the unit-circle point for an angle.

Term

Cosine

Definition

The horizontal coordinate of the unit-circle point for an angle.

Term

Integer

Definition

A whole count, including positive counts, negative counts and zero.

Term

Multiple

Definition

A number obtained by multiplying a given number by an integer.

Term

Domain

Definition

The set of inputs for which a function has an output.

Term

Range

Definition

The set of output values a function actually reaches.

Term

Undefined

Definition

No output exists at that input. Here the formula would divide by zero.

Term

Numerator

Definition

The top of a fraction, the amount being divided.

Term

Denominator

Definition

The bottom of a fraction, the number you divide by. It must be nonzero.

Term

Zero

Definition

For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

Term

Reciprocal

Definition

One divided by a nonzero number. A number times its reciprocal equals 1.

Term

Vertical asymptote

Definition

A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.

Term

Branch

Definition

One connected piece of a graph. Here consecutive asymptotes bound each branch.

Term

Unbounded

Definition

Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.

Term

Period

Definition

A positive horizontal input distance after which the whole pattern repeats.

Term

Fundamental period

Definition

The smallest positive period of a function.

Term

Symmetry

Definition

A picture matches itself after a specified reflection or rotation.

Term

x-axis

Definition

The horizontal coordinate line, whose points have output coordinate y = 0.

Term

y-axis

Definition

The vertical coordinate line, whose points have input coordinate x = 0.

Term

Origin

Definition

The crossing of the axes, with coordinates (0, 0).

Term

Ratio

Definition

One number compared with another by division, with a nonzero divisor.