Quarry School

Trigonometry / Graphs of the other four functions

Graphs of the other four functions

Subject: Mathematics

All 9 lessons, in order.

The unit at a glance

  1. Four formulas and the inputs they must skip

    Think of four number machines that all begin with the same angle.

  2. Range: the output heights each graph can reach

    Imagine the graph shining a light sideways onto a wall.

  3. Even and odd: how the picture balances

    Hold a paper graph up to a mirror along the vertical axis.

  4. Period: copy the right-sized piece

    Think of a repeating wallpaper strip.

  5. Tangent and the meaning of a vertical asymptote

    Imagine walking along a ramp that climbs beside a tall fence.

  6. Cotangent: the branch that falls

    Picture a road that descends between two closed gates.

  7. Cosecant: build a reciprocal graph from sine

    Imagine a machine that keeps your position along a road but changes the height written on your sign.

  8. Secant: build a reciprocal graph from cosine

    Think of the same height-changing machine with a different starting drawing.

  9. Read, sketch and remember all four graphs

    Picture a route map with landmarks and gaps.

Rules (9)
  • Four formulas and the inputs they must skip

    tan x = sinxcosx; cot x = cosxsinx; sec x = 1cosx; csc x = 1sinx.
    For tan and sec, require x ≠ π2 + nπ; for cot and csc, require x ≠ nπ, with n any integer.

  • Range: the output heights each graph can reach

    tan x and cot x have range (−∞, ∞). sec x and csc x have range (−∞, −1] ∪ [1, ∞), meaning y ≤ −1 or y ≥ 1.

  • Even and odd: how the picture balances

    sec(−x) = sec x is even, with y-axis symmetry. tan(−x) = −tan x, cot(−x) = −cot x and csc(−x) = −csc x are odd, with origin symmetry. In each identity, x and −x must both be allowed inputs.

  • Period: copy the right-sized piece

    tan(x + π) = tan x and cot(x + π) = cot x. sec(x + 2π) = sec x and csc(x + 2π) = csc x. Their fundamental periods are π, π, 2π and 2π respectively.

  • Tangent and the meaning of a vertical asymptote

    tan x = sinxcosx, with x ≠ π2 + nπ for every integer n. The vertical asymptotes are x = π2 + nπ.
    Each branch is continuous and increasing; the central branch is on (−π2, π2) and the pattern repeats every π.

  • Cotangent: the branch that falls

    cot x = cosxsinx, with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ and its period is π.
    On (0, π), the continuous decreasing branch passes through (π4, 1), (π2, 0), and (3π4, −1).

  • Cosecant: build a reciprocal graph from sine

    csc x = 1sinx, with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and csc(−x) = −csc x.

  • Secant: build a reciprocal graph from cosine

    sec x = 1cosx, with x ≠ π2 + nπ for every integer n. Its vertical asymptotes are x = π2 + nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and sec(−x) = sec x.

  • Read, sketch and remember all four graphs

    for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote. Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.

Recipes (9)
  • Four formulas and the inputs they must skip
    1. 1. Write the formula as a fraction because the denominator identifies the restriction.
    2. 2. Set the denominator equal to 0 to find the inputs that would make the division impossible.
    3. 3. Read those angles from the unit circle and substitute them back into the denominator to verify it is 0.
    4. 4. Exclude those inputs. Keep a zero numerator when the denominator is nonzero.
  • Range: the output heights each graph can reach
    1. 1. Identify whether you have a quotient function or a reciprocal-of-sine-or-cosine function.
    2. 2. For tangent or cotangent, accept any real output because every height occurs.
    3. 3. For secant or cosecant, keep outputs at or below −1 and at or above 1.
    4. 4. Include −1 and 1; exclude only the open middle band −1 < y < 1.
  • Even and odd: how the picture balances
    1. 1. Check that the input is allowed before using symmetry.
    2. 2. If the function is secant, negate the input and keep the output height.
    3. 3. If it is tangent, cotangent or cosecant, negate both input and output.
    4. 4. On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.
  • Period: copy the right-sized piece
    1. 1. Select π for tangent or cotangent and 2π for secant or cosecant.
    2. 2. Sketch a complete piece of that width, keeping excluded endpoints out of the graph.
    3. 3. Copy its points and breaks left and right by integer multiples of the period.
    4. 4. For an exact value, add or subtract complete periods to reach a known allowed input.
  • Tangent and the meaning of a vertical asymptote
    1. 1. Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.
    2. 2. For the central branch, use x = −π2 and x = π2. Check cos(−π2) = 0 and cos(π2) = 0 before drawing the dashed vertical lines.
    3. 3. Plot (−π4, −1), (0, 0), and (π4, 1), using the exact unit-circle values in the worked example's three-column table.
    4. 4. Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.
    5. 5. Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.
  • Cotangent: the branch that falls
    1. 1. Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.
    2. 2. For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.
    3. 3. Read the three table columns to plot (π4, 1), (π2, 0), and (3π4, −1).
    4. 4. Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.
    5. 5. Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.
  • Cosecant: build a reciprocal graph from sine
    1. 1. Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.
    2. 2. Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.
    3. 3. Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.
    4. 4. Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.
    5. 5. Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.
  • Secant: build a reciprocal graph from cosine
    1. 1. Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.
    2. 2. Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.
    3. 3. Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.
    4. 4. Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.
    5. 5. Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.
  • Read, sketch and remember all four graphs
    1. 1. Write the quotient or reciprocal formula.
    2. 2. Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.
    3. 3. Plot the known key points within each allowed branch.
    4. 4. Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.
    5. 5. Repeat by the fundamental period and check the even or odd symmetry and the range.
Traps (9)

Lesson 1 of 9

Four formulas and the inputs they must skip

Subject: MathematicsLeans on: Unit-circle coordinatesLeans on: Zero numerator versus denominatorLeans on: Integer multiplesLeans on: SubstitutionOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Think of four number machines that all begin with the same angle. Each machine first reads the angle's position on a circle. Then it divides using those coordinates. A denominator is the number on the bottom of a fraction. If that number is zero, the machine cannot give an output. The Domain is the set of inputs the machine accepts. A Quadrantal angle ends on an axis, so one of its circle coordinates is zero. You will find which of the four machines uses that zero as a denominator. This gives a reason for every missing input instead of four unrelated lists to memorize. Tangent, cotangent, secant and cosecant are the full names of tan, cot, sec and csc.

Explain it like I am five

Picture sharing 1 pizza: 2 friends each get 12, but with 0 friends there is no answer, since no share times 0 makes 1. A fraction with 0 on the bottom, the denominator, is undefined: it has no value.

Each function is a fraction built from the circle point for the angle x, (cos x, sin x): tan x = sinxcosx, cot x = cosxsinx, sec x = 1cosx and csc x = 1sinx.

Example: x = 5π2, a full lap (2π) plus a quarter lap, ends straight up at (0, 1), so cosine is 0 and sine is 1. Then cot 5π2 = 01 = 0 and csc 5π2 = 1 are fine, but tan 5π2 and sec 5π2 both equal 10: undefined.

Cosine is 0 straight up and down, at x = π2 + nπ for any integer n (a whole number: positive, negative or zero), so tan and sec skip those inputs. Sine is 0 far right and far left, at x = nπ, so cot and csc skip those.

2 Picture it

domain−2π−ππ2π−4−224domain−2π−ππ2π−4−224
y = tan x.

Reminder

Reminder: Unit-circle coordinates, Zero numerator versus denominator, Integer multiples, Substitution
  • Unit-circle coordinates. Cosine first, sine second: at π2 the point (0, 1) gives cos = 0 and sin = 1.
  • Zero numerator versus denominator. 05 = 0, but 50 is undefined.
  • Integer multiples. An integer can be negative or zero: nπ with n = −2 is −2π.
  • Substitution. Check an excluded input in the bottom: sin π = 0.

3 Why

A quotient is a division. The Quotient identities are equalities writing tangent and cotangent as divisions of sine and cosine. The Reciprocal identities write secant and cosecant as one divided by cosine or sine. An identity is an equality true for all inputs where its two sides exist. Cosine is zero at vertical-axis angles, π2 + nπ. Sine is zero at horizontal-axis angles, nπ. In each family the other coordinate is 1 or −1, so the numerator stays nonzero. Thus each formula fails precisely at its stated denominator zeros.

4 The rule

tanx=sinxcosx; cotx=cosxsinx; secx=1cosx; cscx=1sinx.

For tan and sec, require x≠π2+nπ; for cot and csc, require x≠nπ, with n any integer.

The same idea, five ways

Say it

Say the domain is every accepted input. The label Dtan names tangent's domain, and Dcot, Dsec and Dcsc name the other domains. A subscript is a small label identifying which function the letter belongs to.

Write it

Each function accepts every real angle except the angles that make its denominator zero.

In math
  • Dtan = Dsec = {x | x ≠ π2 + nπ, for every integer n}
  • Dcot = Dcsc = {x | x ≠ nπ, for every integer n}
  • graph words: skip the vertical lines at those input positions
Like

A machine has a list of inputs it cannot accept.

See it
domain−2π−ππ2π−4−224
y = cot x, for x from −6.5 to 6.5.

The same idea, other ways

As a machine

The machine accepts an angle only if the division stage has a nonzero bottom.

π/21 ÷ cos xinputoutputundefined
A zero cosine stops the secant machine.
As a circle

Vertical-axis points have cosine 0. Horizontal-axis points have sine 0. Read the denominator to decide which pair stops.

x = cos θy = sin θ(−1, 0)
The zero sine at π stops cotangent and cosecant.
With multiplication

For 1 ÷ 0 to have an answer, answer × 0 would need to equal 1. It never can.

12 ÷ 3 = 412 ÷ 2 = 612 ÷ 1 = 1212 ÷ 0 = ?0 groups: nowhere to put them, so no answer
No number of zero-sized groups can give a total of one.
As a memory cue

Tip: Check the bottom. Cosine bottom means the vertical axis is forbidden; sine bottom means the horizontal axis is forbidden.

tan, sec: cosine bottom

cot, csc: sine bottom

Bottom 0 means no output

Part 1: Tangent: sine divided by cosine

Tangent compares the vertical coordinate with the horizontal coordinate of a point on the circle. Think of rise divided by run on a ramp. A zero rise can give zero steepness, but a zero run cannot sit on the bottom of a fraction. That is why tangent skips the axis angles where cosine is zero.

  • Rule: tan x = sinxcosx, with cos x ≠ 0.
  • Domain: all real x except x = π2 + nπ, with n any integer.
  • The same excluded angles in degrees are 90° + 180°n.
tan 0 = 0domain−2π−ππ2π−4−224
y = tan x, its point labelled “tan 0 = 0”.
The same idea, five ways
Say it

Say tangent is sine divided by cosine.

Write it

A tangent input is allowed when its cosine is not zero.

In math
  • tanx=sinxcosx
  • cos x ≠ 0
  • x≠π2+nπ
  • {x | x ≠ π2 + nπ, for every integer n}
Like

A ramp's rise can be zero; its run cannot be zero in a rise-over-run fraction.

See it
domain−2π−ππ2π−4−224
The same picture again: y = tan x.

Worked example

Tangent accepts a zero numerator

In plain words, enter angle zero and decide which output the formula gives. Find tan 0.

Show the steps and the answer
(0, 0)−101−4−224
y = tan x, its point labelled “(0, 0)”.
  1. At 0 the circle point is (1, 0), so sin0=0 and cos0=1.Cosine is the horizontal coordinate and sine the vertical coordinate.
  2. tan0=01=0.The denominator is nonzero, so this division has an answer.
Answer
tan 0 = 0.
Double-check Multiplication checks the division: 0 × 1 = 0.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: every quadrantal angle makes tangent undefined.
At x = 0 the denominator is 1, so nothing prevents division.
✓ Instead: Only quadrantal angles on the vertical axis make cosine zero and exclude tangent.
Tips and tricks
  • Tangent and secant share the cosine bottom, so they share forbidden inputs.

Part 2: Cotangent: cosine divided by sine

Cotangent reverses tangent's two coordinate roles. It is run divided by rise. The vertical coordinate, sine, now sits on the bottom, so the forbidden inputs move to the horizontal axis. Use this quotient directly whenever tangent itself is undefined. The formula 1 divided by tangent can only be used when tangent exists and is nonzero.

  • Rule: cot x = cosxsinx, with sin x ≠ 0.
  • Domain: all real x except x = nπ, with n any integer.
  • The excluded angles in degrees are 180°n.
domain−2π−ππ2π−4−224
The same picture again: y = cot x, for x from −6.5 to 6.5.
The same idea, five ways
Say it

Say cotangent is cosine divided by sine.

Write it

A cotangent input is allowed when its sine is not zero.

In math
  • cot x = cosxsinx
  • sin x ≠ 0
  • x ≠ nπ
  • {x | x ≠ nπ, for every integer n}
Like

Run divided by rise needs a nonzero rise.

See it
domain−2π−ππ2π−4−224
The same picture a third time: y = cot x, for x from −6.5 to 6.5.

Worked example

Cotangent rejects angle zero

In plain words, test whether angle zero has a cotangent output. Find cot 0.

Show the steps and the answer
domain−π−π/2π/2π−4−224
y = cot x, for x from −3.4 to 3.4.
  1. At 0, cos0=1 and sin0=0, so cot 0 would be 10.The quotient places sine on the bottom.
  2. There is no output at x=0.No number times 0 gives 1. This makes zero a forbidden input.
Answer
cot 0 is undefined.
Double-check The horizontal-axis circle point (1, 0) has a zero sine, exactly the bottom that cotangent requires.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: cot(π2) is undefined because tan(π2) is undefined.
The quotient for cotangent has sine, not cosine, in its denominator.
✓ Instead: cot(π2) = 01 = 0.
Tips and tricks
  • Use cos divided by sin to evaluate cotangent at an axis angle.

Part 3: Secant: reciprocal of cosine

Secant asks how many copies of the cosine number make one. If cosine is half, two copies make one, so secant is 2. If cosine is zero, no copies can make one. This makes secant fail at exactly the same angle inputs as tangent because both put cosine on the bottom.

  • Rule: sec x = 1cosx, with cos x ≠ 0.
  • Domain: all real x except x = π2 + nπ.
  • The excluded angles in degrees are 90° + 180°n.
domain−2π−ππ2π−4−224
y = sec x, solid, beside y = cos x, dashed, for x from −6.5 to 6.5.
The same idea, five ways
Say it

Say secant is one divided by cosine.

Write it

Secant exists exactly where cosine is nonzero.

In math
  • sec x = 1cosx
  • x≠π2+nπ
Like

How many pieces the size of cosine fit into one whole?

See it
domain−2π−ππ2π−4−224
y = sec x, for x from −6.5 to 6.5.

Worked example

A negative cosine gives a negative secant

In plain words, take the reciprocal of cosine at a half-turn. Find sec π.

Show the steps and the answer
(π, −1)π/2π3π/22π−4−224
y = sec x, solid, beside y = cos x, dashed, for x from −0.3 to 6.5.
  1. At π the unit-circle point is (−1,0), so cosπ=−1.Cosine is the first coordinate.
  2. secπ=1−1=−1.A negative denominator gives a negative reciprocal.
Answer
sec π = −1.
Double-check cos π × sec π = (−1) × (−1) = 1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: sec x means cos x with a minus sign.
A reciprocal changes size; a minus sign changes sign. At x = 0 cosine and secant are both 1.
✓ Instead: Compute 1 divided by the nonzero cosine.
Tips and tricks
  • The letters in sec and cos differ; remember the pair by saying secant belongs to cosine.

Part 4: Cosecant: reciprocal of sine

Cosecant asks for one divided by sine. If sine is half, its reciprocal is 2. If sine is negative, its reciprocal stays negative. If sine is zero, there is no reciprocal. The forbidden inputs are therefore the same as cotangent's: the angles on the horizontal axis, where the circle point has height zero.

  • Rule: csc x = 1sinx, with sin x ≠ 0.
  • Domain: all real x except x = nπ.
  • The excluded angles in degrees are 180°n.
domain−2π−ππ2π−4−224
y = csc x, solid, beside y = sin x, dashed, for x from −6.5 to 6.5.
The same idea, five ways
Say it

Say cosecant is one divided by sine.

Write it

Cosecant exists exactly where sine is nonzero.

In math
  • csc x = 1sinx
  • x ≠ nπ
Like

Use the height as the size of each piece when counting pieces in one whole.

See it
domain−2π−ππ2π−4−224
y = csc x, for x from −6.5 to 6.5.

Worked example

Cosecant exists on the upper vertical axis

In plain words, enter the quarter-turn and take the reciprocal of its sine. Find csc(π2).

Show the steps and the answer
(π/2, 1)π/2π3π/22π−4−224
y = csc x, solid, beside y = sin x, dashed, for x from −0.3 to 6.5.
  1. At π2 the point is (0, 1), so sin(π2)=1.Sine reads the vertical coordinate.
  2. csc(π2)=11=1.The bottom is nonzero, so the input is accepted.
Answer
csc(π2) = 1.
Double-check Its sine partner times it gives 1 × 1 = 1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: csc 0 = 0 because sin 0 = 0.
A zero output of sine becomes a zero denominator for cosecant.
✓ Instead: csc 0 is undefined.
Tips and tricks
  • Cosecant belongs to sine; cotangent shares its sine bottom.

5 How

  1. Write the formula as a fraction because the denominator identifies the restriction.
  2. Set the denominator equal to 0 to find the inputs that would make the division impossible.
  3. Read those angles from the unit circle and substitute them back into the denominator to verify it is 0.
  4. Exclude those inputs. Keep a zero numerator when the denominator is nonzero.

Find the denominator's forbidden angles

1
Is the denominator cosine?
YesExclude π2 + nπ; for n = 0, cos(π2) = 0 verifies it.
NoThe denominator is sine; exclude nπ, verified by sin 0 = 0.
↓
2
Is zero only in the numerator?
YesKeep the input; the output is zero when the bottom is nonzero.
NoIf the bottom is zero, the input has no output.
  1. Identify the denominator in the quotient or reciprocal formula.
  2. Set that denominator equal to 0 to locate failures.
  3. Find the full integer family and check a member in the denominator.
  4. Exclude that family while keeping valid zero outputs.
  5. To list forbidden inputs inside an interval, put the angle family between the two given bounds. Divide all parts by positive π, then subtract 12 from all parts if the family is π2 + nπ. Keep every integer between the resulting bounds on n. This finds exactly the family members inside the requested interval, even if the interval is far from zero. For [−π, 3π] and the cosine-zero family, this gives −32 ≤ n ≤ 52, so n = −1, 0, 1, 2. Compare the coefficients of π to check neighbors: −3π2 = −1.5π < −π.

6 Worked example

Worked example

Which machines accept a quarter-turn?

In plain words, use one angle to decide which machines have a number to return. Find tan, cot, sec and csc at x = π2.

Show the steps and the answer
x = cos θy = sin θ(0, 1)
The zero horizontal coordinate excludes tan and sec; the height 1 allows cot and csc.
  1. The point at π2 is (0, 1), so cos(π2)=0 and sin(π2)=1.The first coordinate is cosine and the second is sine.
  2. tan(π2)=10 and sec(π2)=10, so both are undefined.Their common denominator, cosine, is 0. This verifies why the angle is excluded.
  3. cot(π2)=01=0 and csc(π2)=11=1.Their denominator, sine, is 1, so both divisions are permitted.
Answer
  • tan(π2): undefined.
  • cot(π2): 0.
  • sec(π2): undefined.
  • csc(π2): 1.
Double-check At a vertical-axis angle, the two cosine-bottom functions fail and the two sine-bottom functions remain defined, exactly as the rule predicts.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 4

Zero on top

In plain words, decide whether a zero sine causes trouble. Find tan 0.

Show the steps and the answer
zero output−101−4−224
y = tan x, its point labelled “zero output”.
  1. sin0=0 and cos0=1.The point is (1, 0).
  2. tan0=01=0.The bottom is 1, so the division is allowed.
Answer
0.
Double-check 0 × 1 = 0 checks the division.

Rung 2 of 4

Zero on the bottom

In plain words, decide whether a half-turn has a cosecant output. Find csc π.

Show the steps and the answer
domainπ/2π3π/22π−4−224
y = csc x, for x from 0.1 to 6.4.
  1. sinπ=0, so cscπ would be 10.The point at π is (−1, 0).
  2. Exclude x=π.This is a verified sine zero, so the fraction has no output.
Answer
csc π is undefined.
Double-check π = nπ with n = 1, so the input belongs to the sine-zero family.

Rung 3 of 4

A negative axis angle

In plain words, turn clockwise three quarters of a full turn and evaluate both fractions. Find sec(−3π2) and cot(−3π2).

Show the steps and the answer
−3π/2terminal sideinitial side
The clockwise turn ends on the upper vertical axis.
  1. −3π2 ends at (0, 1), so cosine is 0 and sine is 1.Adding a full turn 2π reaches π2, the same circle point.
  2. sec=10 is undefined; cot=01=0.Use the actual denominators, even for a negative input.
Answer
  • sec: undefined.
  • cot: 0.
Double-check −3π2 = π2 + (−2)π, and substituting this angle into cosine indeed gives 0.

Rung 4 of 4

A whole interval of exclusions

In plain words, find every cosine-zero angle in this closed interval. List the forbidden secant inputs in [−π, 3π].

Show the steps and the answer
domain−ππ2π3π−4−224
y = sec x, for x from −3.2 to 9.5.
  1. Use x=π2+nπ because secant divides by cosine.Setting cos x = 0 locates the inputs to discard.
  2. Divide −π≤π2+nπ≤3π by positive π to get −1≤12+n≤3. Subtract 12 from all three parts: −32≤n≤52.This finds exactly which integer choices make the excluded angle lie in the requested interval. Positive division preserves order and equal subtraction preserves the bounds.
  3. Substitute n=−1, 0, 1, 2 to obtain −π2,π2,3π2,5π2. Each angle's cosine is 0.These are the vertical-axis angles inside the stated boundaries.
  4. The next angles outward are −3π2<−π and 7π2>3π, so leave them out.Checking the neighboring candidates proves the list is complete.
Answer
  • x=−π2.
  • x=π2.
  • x=3π2.
  • x=5π2.
Double-check The endpoints −π and 3π have cosine −1, so neither endpoint is forbidden.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: tan π is undefined because π is quadrantal.
At π the zero is sine, on top. Cosine is −1, on the bottom.
✓ Instead: tanπ=0−1=0.
✗ Not this: Counterexample: n must be positive in x = nπ.
The notes use an integer n; negative integers and zero are included.
✓ Instead: n = −1 gives −π, n = 0 gives 0, and both are sine zeros.

Tips and tricks

  • Write the fraction before marking a forbidden input.
  • Keep the memory cue check the bottom beside your domain rule.

7 The trap

A zero on the top is not a break. Check the bottom first: 01 = 0, while 10 is undefined.

Keep in mind

  • Write the fraction first, then ask where its bottom is 0: sec x = 1cosx, and cos x = 0 at π2, −π2, 5π2 and so on.
  • The n in π2 + nπ may be negative: n = −3 gives π2 − 3π = −5π2.
  • A 0 on top is allowed: cot x = 0 wherever cos x = 0, because the bottom, sin x, is then 1 or −1.
  • In this section x names the angle, the graph's input, not the circle point's x-coordinate: at x = π2 the point is (0, 1), so cos x = 0.

Memory hook

Co names divide by sine, plain names by cosine: cotangent and cosecant skip x = nπ; tangent and secant skip x = π2 + nπ.

Flash cards

Say the answer out loud, then flip.

What is a denominator?
The bottom of a fraction.
Which inputs do tan x and sec x skip?
x = π2 + nπ (n any integer), where cos x = 0.
Which inputs do cot x and csc x skip?
x = nπ, where sin x = 0.
Is x = −7π2 allowed in cot x?
Yes: −7π2 + 4π = π2, where sin x = 1, not 0, so cot(−7π2) = 01 = 0.
sec 9π2 = ?
Undefined: 9π2 − 4π = π2, where cos x = 0.
True or false: cot x is undefined at every quadrantal angle.
  • False: it fails only where sin x = 0
  • cot π2 = 01 = 0.

Lesson 2 of 9

Range: the output heights each graph can reach

Subject: MathematicsLeans on: Reciprocal signsLeans on: Intervals and unionLeans on: Unit-circle coordinate boundsLeans on: Vertical-axis circle reflectionOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Imagine the graph shining a light sideways onto a wall. Its shadow marks every height the graph ever reaches. That collection of output heights is the Range. Tangent and cotangent reach every real height, positive, zero or negative. Secant and cosecant leave a gap around zero because they are reciprocals of numbers no larger than one in size. Their heights can be 1 or more, or −1 or less. You need both the included edge heights and the missing middle. A graph window shows only part of the shadow; its top border does not put a ceiling on the function.

Explain it like I am five

Picture two glass elevators in an endless tower, each able to stop at any height, even between floors. The tangent and cotangent elevator reaches every height. The secant and cosecant elevator never stops strictly between −1 and 1, though it does stop at 1 and −1.

Why: sec x = 1cosx and csc x = 1sinx, and cosine and sine are never bigger than 1 in size, so 1 divided by either is at least 1 in size. Tangent is sinxcosx; near x = π2 the bottom gets tiny, so the height passes any level you name.

Example: can csc x = 3? Flip it back: sin x would be 13, about 0.33, an allowed sine, so yes. Can csc x = −0.5? Flip: sin x would be 1 ÷ (−0.5) = −2, below −1, so no.

So the range, all output heights, of tan and cot is (−∞, ∞): every real number (∞ is infinity). For sec and csc it is (−∞, −1] ∪ [1, ∞), read 'at most −1 or at least 1'.

2 Picture it

range−2π−ππ2π−4−224range−2π−ππ2π−4−224
y = sec x.

Reminder

Reminder: Reciprocal signs, Intervals and union, Unit-circle coordinate bounds, Vertical-axis circle reflection
  • Reciprocal signs. The reciprocal of −12 is −2, with the same sign.
  • Intervals and union. The bracket in [1, ∞) includes 1; ∪ joins that piece with the negative piece.
  • Unit-circle coordinate bounds. A circle of radius 1 never has a horizontal coordinate 2, so cos x ≠ 2.
  • Vertical-axis circle reflection. Reflect 60° to 120°: cos(2π3) = −12 while sine stays 32.

3 Why

Sine and cosine take every value from −1 to 1. A positive value at most 1 has a reciprocal at least 1; a negative value of magnitude at most 1 has a reciprocal at most −1. Every height in those outside bands occurs: its reciprocal is an available circle coordinate. For tangent output m, point toward (1, m) and shrink both coordinates equally to the unit circle. The nonzero horizontal coordinate ensures an allowed angle, and the ratio stays m. For cotangent use (m, 1); its nonzero vertical coordinate ensures an allowed angle and ratio m.

4 The rule

tan x and cot x have range (−∞,∞).

sec x and csc x have range (−∞,−1]∪[1,∞), meaning y≤−1 or y≥1.

The same idea, five ways

Say it

Say range means possible output heights.

Write it

The range lists outputs, while the domain lists inputs.

In math
  • range(tan) = range(cot) = (−∞, ∞)
  • range(sec) = range(csc) = (−∞, −1] ∪ [1, ∞)
  • graph words: look at the shadow on the y-axis
Like

A side lamp makes the graph's height shadow on a wall.

See it
range−2π−ππ2π−4−224
The same picture again: y = sec x.

The same idea, other ways

As a shadow

Range is the graph's shadow on the vertical axis. The secant shadow skips the middle but includes its two edges.

range−2π−ππ2π−4−224
The same picture a third time: y = sec x.
With pieces

If one piece is 14 of a whole, four pieces make one. Taking a reciprocal of a smaller positive fraction makes a larger positive number.

1/44/1
One fourth becomes four under the reciprocal operation.
From a ramp

A ramp can have any finite rise per unit run. Tangent therefore has no forbidden real output heights, even though it has forbidden angle inputs.

xyθx = 1y = 3rP(1, 3)Ox = 1 (1 right) y = 3 (3 up) r = √10.0 ≈ 3.2the ray from O through P (and beyond) = the terminal side
The direction through (1, 3) has ratio 3; any other real rise can be chosen too.

Part 1: Tangent and cotangent: every real output

Their input lists have holes, but their output lists do not. A ramp's rise can be small, large, negative or zero. Each valid ratio describes a direction on the circle. By choosing that direction you can produce the desired tangent or cotangent height.

  • Rule: range(tan) = range(cot) = (−∞, ∞).
  • Amplitude means a finite half-height of a bounded wave, half the difference between its highest and lowest outputs.
  • Tangent and cotangent have no amplitude because they have neither a highest nor a lowest output.
range−2π−ππ2π−4−224
y = tan x.
The same idea, five ways
Say it

Say every real output height is possible. Say no amplitude as no finite half-height.

Write it

There is no upper or lower limit on the quotient outputs. Without a highest and lowest output, a finite amplitude cannot be formed.

In math
  • y∈(−∞,∞)
  • {y | y is real}
  • graph words: the shadow covers the entire vertical axis
  • amplitude = highestoutput−lowestoutput2, when both finite heights exist
Like

A ramp can have any finite slope.

See it
range−2π−ππ2π−4−224
The same picture again: y = tan x.

Worked example

Zero is an allowed quotient height

In plain words, find one permitted input for each zero. Show that tangent and cotangent can both have output 0.

Show the steps and the answer
input function and inputoutput outputtan 00cot(π/2)0
Both columns show a permitted zero output.
  1. tan0=01=0.Sine is zero while cosine is nonzero.
  2. cot(π2)=01=0.Cosine is zero while sine is nonzero.
Answer
  • Tangent gives 0 at x = 0.
  • Cotangent gives 0 at x = π2.
Double-check Both numerator-zero inputs have a bottom of 1, so neither division is forbidden.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: tangent has amplitude 1 because its plotted points include ±1.
Those two points are sample heights, not highest and lowest heights.
✓ Instead: Tangent reaches past every finite height, so it has no amplitude.
Tips and tricks
  • Do not confuse the domain's missing inputs with the range's output heights.

Part 2: Secant and cosecant: two closed output bands

A reciprocal of a nonzero sine or cosine cannot be smaller than one in size. Picture pieces of at most one whole: you need at least one piece to make a whole. Negative pieces give the same size restriction below zero. Their range keeps two outside pieces and removes the middle.

  • Rule: y ≤ −1 or y ≥ 1.
  • Both endpoints ±1 occur.
  • The excluded band is (−1, 1).
  • Secant and cosecant also have no finite amplitude because their outside heights are unbounded.
−11(−∞, −1] ∪ [1, ∞)
The closed edge heights are included, with no end in either direction.
The same idea, five ways
Say it

Say at most negative one or at least one.

Write it

The reciprocal graphs occupy two separated height bands.

In math
  • y∈(−∞,−1]∪[1,∞)
  • {y | y ≤ −1 or y ≥ 1}
  • graph words: no points in the strip −1 < y < 1
Like

Two permitted roads on opposite sides of a closed middle stretch.

See it
range−2π−ππ2π−4−224
y = csc x.

Worked example

Both range endpoints occur

In plain words, prove the two edge heights belong to its range. Find inputs giving cosecant outputs 1 and −1.

Show the steps and the answer
1−1range−2π−ππ2π−4−224
y = csc x, with the points (π/2, 1) and (3π/2, −1).
  1. csc(π2)=11=1.The sine at the top of the unit circle is 1.
  2. csc(3π2)=1−1=−1.The sine at the bottom of the unit circle is −1.
Answer
  • 1 occurs at π2.
  • −1 occurs at 3π2.
Double-check Multiplying each cosecant by its sine gives 1, confirming both reciprocal outputs.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: sec x = −12 is possible because it is negative.
The condition requires at most −1, not every negative number.
✓ Instead: −12 is in the excluded middle band.
Tips and tricks
  • Keep the brackets on −1 and 1 when writing the reciprocal range.

5 How

  1. Identify whether you have a quotient function or a reciprocal-of-sine-or-cosine function.
  2. For tangent or cotangent, accept any real output because every height occurs.
  3. For secant or cosecant, keep outputs at or below −1 and at or above 1.
  4. Include −1 and 1; exclude only the open middle band −1 < y < 1.

Check a proposed output

1
Is the function tangent or cotangent?
YesEvery real candidate output is allowed.
NoFor secant or cosecant check y ≤ −1 or y ≥ 1.
↓
2
Does a reciprocal candidate lie strictly between −1 and 1?
YesReject it; that height is in the missing middle.
NoKeep it, including ±1.
  1. Read which function the output belongs to.
  2. Apply the all-real quotient range or the two-band reciprocal range.
  3. For a reciprocal candidate, optionally flip it back and check the required sine or cosine.
  4. Include allowed endpoints and explain rejections.

6 Worked example

Worked example

Which proposed secant heights are possible?

In plain words, check four proposed heights against the range. Decide whether sec x can equal 1, −2, 0 or 12.

Show the steps and the answer
−2−101/21(−∞, −1] ∪ [1, ∞)
The two allowed pieces contain 1 and −2, while the middle candidates lie in the gap.
  1. Keep 1 because sec0=1cos0=11=1.The endpoint 1 is included, and input 0 gives it.
  2. Keep −2 because cos(2π3)=−12, so sec(2π3)=1÷(−12)=−2.A reciprocal retains the negative sign. Reflection of the 60° circle point into the upper-left region changes cosine to −12.
  3. Reject 0 because 1 divided by a finite nonzero number cannot be zero.If the reciprocal equaled 0, multiplying by its denominator would give 1 = 0.
  4. Reject 12 because it would require cosx=2, outside cosine's possible coordinates.Taking the reciprocal back checks whether the proposed output could have a valid denominator.
Answer
  • 1: possible.
  • −2: possible.
  • 0: impossible.
  • 12: impossible.
Double-check The permitted heights satisfy y ≤ −1 or y ≥ 1; the two rejected heights lie in the gap.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: the range of secant is (−∞, −1) ∪ (1, ∞).
Parentheses throw away −1 and 1, even though both are actual reciprocal outputs.
✓ Instead: Use (−∞, −1] ∪ [1, ∞).

Tips and tricks

  • For a proposed reciprocal output, flip it back. If the required sine or cosine is beyond ±1, reject it.

7 The trap

Excluding ±1 along with the middle band. The gap is open: −1 < y < 1. At the edges, reciprocal values are still ±1.

Keep in mind

  • The edges count: csc x reaches 1 at the tops of the sine wave and −1 at its bottoms, so write [1, ∞) and (−∞, −1] with square brackets.
  • A graph window cuts off the picture, not the function: on a screen showing −4 ≤ y ≤ 4, tan x still reaches 100 above the top edge.
  • The graph of csc x never touches the x-axis: 1 divided by a number is never 0, even 1 ÷ 10000 = 0.0001.

Memory hook

Sec and csc skip the middle band −1 < y < 1 but touch its edges, ±1; tan and cot reach every height.

Flash cards

Say the answer out loud, then flip.

What is the range of a function?
All its outputs: every height its graph reaches.
Range of cot x?
(−∞, ∞): every real number.
Range of csc x?
(−∞,−1]∪[1,∞).
Can csc x = 34?
No: sin x would be 43 ≈ 1.33, bigger than 1.
Can sec x = −1.6?
Yes: cos x would be 1 ÷ (−1.6) = −0.625, inside [−1, 1].
Why is the range of sec x not written (−∞, −1) ∪ (1, ∞)?
Because sec x does reach −1 and 1, at the valleys and peaks of cos x, so both ends need square brackets.

Lesson 3 of 9

Even and odd: how the picture balances

Subject: MathematicsLeans on: Negative divisionLeans on: Unit-circle reflectionLeans on: Reciprocal of a root fractionLeans on: CoordinatesLeans on: Domain restrictionsLeans on: Function notationLeans on: With respect to (w.r.t.)Open this lesson
Leans on 0Comes back in 0

1 In plain words

Hold a paper graph up to a mirror along the vertical axis. If the mirror image matches the graph, it has Symmetry with respect to the y-axis. An Even function has that kind of balance. Secant is even: walking the same angle distance left or right gives the same height. For an Odd function, imagine turning the paper halfway around the origin. Every point moves to the opposite side and the opposite height. Tangent, cotangent and cosecant match after that half-turn. Even and odd name these balances; they do not say whether an output is an even or odd whole number.

Explain it like I am five

Picture a butterfly: fold it down the middle and the two wings match. A graph that matches its own mirror image across the y-axis like that belongs to an even function. Now picture a playing card such as a king: turn it upside down, a half turn about its center, and it looks the same. A graph that looks the same after a half turn about the origin, (0, 0), belongs to an odd function.

Example, with points written (input, height): a calculator set to radians gives sec 0.5 ≈ 1.14 and tan 0.5 ≈ 0.55 (≈ means about). Secant is even, so its graph also passes through about (−0.5, 1.14): opposite input, same height. Tangent is odd, so its graph also passes through about (−0.5, −0.55): opposite input, opposite height.

Why: going from x to −x mirrors the circle point (cos x, sin x) to (cos x, −sin x). Secant uses only cosine, so nothing changes. Tangent, cotangent and cosecant each contain one sine, so their sign flips.

2 Picture it

(−π/3, 2)(π/3, 2)−2π−ππ2π−4−224(−π/3, 2)(π/3, 2)−2π−ππ2π−4−224
y = sec x, its points labelled “(−π/3, 2)” and “(π/3, 2)”.

Reminder

Reminder: Negative division, Unit-circle reflection, Reciprocal of a root fraction, Coordinates, Domain restrictions, Function notation, With respect to (w.r.t.)
  • Negative division. A minus in one position changes the sign: −12 = −12.
  • Unit-circle reflection. At ±π4, cosine stays 22 while sine changes sign.
  • Reciprocal of a root fraction. 1÷22=2.
  • Coordinates. The point (−1, −2) is left and below the origin because both coordinates are negative.
  • Domain restrictions. cot 0 is undefined because sin 0 = 0, so do not substitute zero into its symmetry equation.
  • Function notation. f names a rule: f(−x) means its output at the opposite input, while −f(x) means the negative of its original output.
  • With respect to (w.r.t.). With respect to (w.r.t.) names the reference: secant's symmetry uses the y-axis as its mirror.

3 Why

Reflecting an angle across the horizontal axis keeps cosine and changes the sign of sine. Thus sec(−x) = 1 ÷ cos(−x) = 1 ÷ cos x = sec x. Tangent gets a sign change only on top; cotangent gets one only on the bottom; cosecant gets one on the bottom. Each therefore changes its output sign. Their forbidden inputs occur in opposite pairs, so reflecting an allowed input also gives an allowed input. The equalities apply wherever the functions are defined.

4 The rule

sec(−x)=secx is even, with y-axis symmetry.

tan(−x)=−tanx,cot(−x)=−cotx and csc(−x)=−cscx are odd, with origin symmetry. In each identity, x and −x must both be allowed inputs.

The same idea, five ways

Say it

Say symmetry means a picture matches a reflection or a turn.

Write it

The four parent graphs have one of two kinds of balance.

In math
  • even: f(−x) = f(x)
  • odd: f(−x) = −f(x)
  • graph words: y-axis reflection or origin half-turn
Like

A mirror or a half-turn lets you reproduce matching points.

See it
−2π−ππ2π−4−224
y = sec x.

The same idea, other ways

As a mirror

Even symmetry keeps the height and swaps left with right. Secant has that mirror balance.

leftright−2π−ππ2π−4−224
y = sec x, its points labelled “left” and “right”.
As a paper turn

Odd symmetry rotates the graph 180° about the origin. A point above and right gets a partner below and left.

(π/2, 1)(−π/2, −1)−2π−ππ2π−4−224
y = csc x, its points labelled “(π/2, 1)” and “(−π/2, −1)”.
With signs

A negative in exactly one place of a fraction makes its output negative. Sine reverses under x to −x; cosine keeps its sign.

cos(−x)=cosx

sin(−x)=−sinx

sec keeps y; tan, cot, csc reverse y

Part 1: Even function: mirror across the y-axis

The word even means f(−x) = f(x), so opposite input positions have equal outputs. The mirror sits at x = 0, the y-axis. Secant has this balance because its denominator, cosine, already has it. Both sides of the graph can be built from one side.

  • Rule: f(−x) = f(x) for an even function. The domain must also contain −x whenever it contains x.
  • Point pair: (x, y) and (−x, y).
  • Among these four functions, secant is even.
mirrororiginal−2π−ππ2π−4−224
y = sec x, its points labelled “mirror” and “original”.
The same idea, five ways
Say it

Say even means opposite inputs, same output.

Write it

Secant is symmetric with respect to the y-axis.

In math
  • f(−x)=f(x)
  • sec(−x) = sec x
  • (x, y) and (−x, y)
  • graph words: reflect left and right
Like

A mirror on the vertical axis keeps the point's height.

See it
−2π−ππ2π−4−224
The same picture again: y = sec x.

Worked example

Reflect a taller secant point

In plain words, move the known point across the y-axis. sec(π3) = 2. Find the point at input −π3.

Show the steps and the answer
mirrorknown−2π−ππ2π−4−224
y = sec x, its points labelled “mirror” and “known”.
  1. The known point is (π3,2).Coordinates record input first, output second.
  2. Reflect to (−π3,2).Even symmetry reverses the input but preserves the output.
Answer
(−π3,2).
Double-check cos(−π3) = cos(π3) = 12, so secant there is 2.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: secant is even because sec 0 = 1 is an odd integer.
The parity name concerns input reversal, not whole-number divisibility.
✓ Instead: Secant is even because sec(−x) = sec x.
Tips and tricks
  • Even means equal heights.

Part 2: Odd function: half-turn about the origin

Odd symmetry means f(−x) = −f(x). Both directions change: left replaces right and down replaces up. Tangent, cotangent and cosecant have this balance. A graph can have origin symmetry even if it has no point at the origin. Cotangent and cosecant are examples because input zero is forbidden.

  • Rule: f(−x) = −f(x) for an odd function. The domain must also contain −x whenever it contains x.
  • Point pair: (x, y) and (−x, −y).
  • Tangent, cotangent and cosecant are odd.
  • Origin symmetry does not require a value at zero.
knownopposite−2π−ππ2π−4−224
y = cot x.
The same idea, five ways
Say it

Say odd means opposite inputs, opposite outputs.

Write it

The graph matches after a half-turn about the origin.

In math
  • f(−x)=−f(x)
  • tan(−x)=−tanx
  • cot(−x) = −cot x
  • csc(−x) = −csc x
  • (x, y) and (−x, −y)
Like

A half-turn of the paper reverses both coordinates.

See it
−2π−ππ2π−4−224
y = tan x.

Worked example

Three odd partners

In plain words, reverse the signs of three known positive-input outputs. Find tan(−π4), cot(−π4) and csc(−π2).

Show the steps and the answer
1−1−2π−ππ2π−4−224
y = csc x, its points labelled “1” and “−1”.
  1. tan(π4)=cot(π4)=1.Equal sine and cosine give both ratios 1.
  2. Negate the input and output: both negative-angle quotients equal −1.Both functions are odd.
  3. csc(π2)=1, so csc(−π2)=−1.Cosecant is odd too; its input ±π2 is allowed.
Answer
  • tan(−π4)=−1.
  • cot(−π4) = −1.
  • csc(−π2) = −1.
Double-check The corresponding circle points have positive cosine and negative sine for the first two, and sine −1 for the third, confirming all three negative outputs.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: cotangent cannot be odd because cot 0 is undefined.
Odd symmetry compares opposite allowed inputs. It does not demand a plotted point at zero.
✓ Instead: cot(−x) = −cot x for every allowed x, and the excluded inputs are paired as well.
Tips and tricks
  • Write opposite input, opposite output beside the origin-symmetry rule.

5 How

  1. Check that the input is allowed before using symmetry.
  2. If the function is secant, negate the input and keep the output height.
  3. If it is tangent, cotangent or cosecant, negate both input and output.
  4. On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.

Use a negative input without recalculating

1
Is the function secant?
YesUse even symmetry: keep the output.
NoFor tan, cot or csc use odd symmetry: reverse the output.
↓
2
Is the chosen input excluded?
YesReport undefined; do not invent a symmetric number.
NoApply the symmetry identity.
  1. Find the function's even or odd rule.
  2. Verify that the input and its opposite are allowed.
  3. Keep the output for even symmetry; reverse it for odd symmetry.
  4. Check the matching coordinates on the graph.

6 Worked example

Worked example

Same input distance, different symmetry

In plain words, predict the heights at the mirror input without rebuilding the circle each time. Find sec(−π4) and tan(−π4) using the positive-angle values.

Show the steps and the answer
same heightsame height−2π−ππ2π−4−224
y = sec x, its points labelled “same height”.
  1. sec(π4)=1÷22=2, and tan(π4)=1.The equal positive circle coordinates give tangent 1 and the refreshed reciprocal gives secant 2.
  2. sec(−π4)=2.Even symmetry keeps the output height when the input changes sign.
  3. tan(−π4)=−1.Odd symmetry changes the output sign when the input changes sign.
Answer
  • sec(−π4) = 2.
  • tan(−π4)=−1.
Double-check Directly at −π4, cosine is 22 and sine is −22, so the reciprocal is 2 and the quotient is −1.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: an odd function pairs (x, y) with (−x, y).
That pair keeps the output and gives even symmetry.
✓ Instead: Odd symmetry pairs (x, y) with (−x, −y).

Tips and tricks

  • Even means equal heights. Odd means opposite input and opposite output.
  • Check the domain before inserting a negative angle into a symmetry identity.

7 The trap

Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.

Keep in mind

  • Even and odd name a balance, not a kind of number: sec 0.5 ≈ 1.14 is not an even number, yet secant is an even function.
  • For odd symmetry both coordinates flip: (0.5, 0.55) pairs with (−0.5, −0.55), never with (−0.5, 0.55).
  • f(−x) is the height at the opposite input and −f(x) is the opposite of the old height; odd means the two match, as in tan(−0.5) = −tan 0.5 ≈ −0.55.
  • Pair only allowed inputs: at an asymptote of tan x there is no point, so there is nothing to pair.

Memory hook

Butterfly or playing card: secant folds (even, mirror across the y-axis); tangent, cotangent and cosecant spin (odd, half turn about the origin).

Flash cards

Say the answer out loud, then flip.

What does 'symmetric with respect to the y-axis' mean?
Folding along the y-axis makes the two sides match: (x, y) pairs with (−x, y).
Which of tan, cot, sec and csc is even?
Only sec.
Odd symmetry pairs the point (x, y) with which point?
(−x, −y), its partner after a half turn about the origin.
csc 1.2 ≈ 1.073. What is csc(−1.2)?
About −1.073, because cosecant is odd.
sec 2.5 ≈ −1.25. Name the matching point on the graph of sec x at input −2.5.
About (−2.5, −1.25): same height, because secant is even.
Secant has branches below the x-axis. Does that make it odd?
No. Odd means f(−x) = −f(x). Secant has sec(−x) = sec x, so it is even.

Lesson 4 of 9

Period: copy the right-sized piece

Subject: MathematicsLeans on: Signs in divisionLeans on: Fractions of πLeans on: Unit-circle half-turnLeans on: DomainOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Think of a repeating wallpaper strip. You draw one complete design, then slide a copy sideways by the width of that design. A Period is that horizontal repeat distance on a function graph. A Periodic function keeps giving the same output after a fixed input step, wherever the input is allowed. The Fundamental period is the smallest positive repeat distance. Tangent and cotangent need only a half-turn, π radians. Secant and cosecant need a full turn, 2π radians. Repeating the same height once is not enough; the entire pattern, including its missing inputs, must repeat.

Explain it like I am five

Picture a rubber stamp that prints one piece of a wallpaper pattern. Stamp once, slide sideways by exactly the stamp's width, stamp again, forever in both directions. That width is the period: the smallest sideways slide that makes the whole graph repeat, gaps included.

For tangent and cotangent the stamp is π wide (half a lap, 180°). Adding π moves the circle point to the opposite side: (cos x, sin x) becomes (−cos x, −sin x). Tangent and cotangent divide one by the other, so the two minus signs cancel. Secant and cosecant have 1 on top and one coordinate on the bottom, so after π their sign flips; they need the full 2π.

Example: cot 5π4. Slide back one period: 5π4 − π = 5π4 − 4π4 = π4. So cot 5π4 = cot π4 = 1, since cosine and sine are equal there. Check with signs: 5π4 is in Quadrant III, where cotangent is positive.

2 Picture it

−2π−ππ2π−4−224−2π−ππ2π−4−224
y = tan x.

Reminder

Reminder: Signs in division, Fractions of π, Unit-circle half-turn, Domain
  • Signs in division. −2−3 = 23, but 1−3 = −13.
  • Fractions of π. 5π4−π=5π4−4π4=π4.
  • Unit-circle half-turn. A half-turn sends (1, 0) to (−1, 0), reversing both coordinates.
  • Domain. Periodicity does not create a value at a forbidden input: tan(π2 + π) remains undefined.

3 Why

Adding π moves a unit-circle point to its opposite, reversing both sine and cosine. Tangent and cotangent divide one by the other, so the two minus signs cancel. Secant and cosecant reverse their outputs because their numerator stays 1 while the denominator changes sign. They need another half-turn to return to their original outputs. Sine and cosine already repeat after 2π, so their reciprocals do too. Smaller steps fail to match the full patterns, as their repeating zeros or ±1 points show.

4 The rule

tan(x+π)=tanx and cot(x+π)=cotx.

sec(x+2π)=secx and csc(x+2π)=cscx. Their fundamental periods are π,π,2π and 2π respectively.

The same idea, five ways

Say it

Say period is the horizontal distance to the same complete pattern. P names the fundamental period here; Ptan means tangent's fundamental period, and the other subscripts name the other functions.

Write it

A periodic function has identical outputs at inputs separated by a repeat distance.

In math
  • f(x + P) = f(x)
  • P > 0
  • fundamental period: smallest such P
  • graph words: slide the whole graph left or right by P
Like

A wallpaper strip repeats after the width of one whole design.

See it
−2π−ππ2π−4−224
The same picture again: y = tan x.

The same idea, other ways

As wallpaper

A copy of one tangent branch fits after a slide of π. A cosecant copy needs both a positive and a negative branch, a width of 2π.

−2π−ππ2π−4−224
y = csc x, for x from −6.5 to 6.5.
On the circle

A half-turn changes (cos x, sin x) into (−cos x, −sin x). Ratios keep their value; reciprocals reverse their sign.

x = cos θy = sin θopposite the 45° point
Both coordinates reverse after a half-turn.
With small numbers

A ratio 12 becomes −1−2 after both signs reverse, still 12. A reciprocal 12 becomes 1−2, which is −12.

−1−2=12

1−2=−12

Quotients repeat after π; reciprocals need 2π

As a checking rule

A true period matches every allowed input, not one convenient pair of points. Check the guide denominator and its sign.

input xoutput sec x01π−12π1
The heights after π differ; after 2π they match.

Part 1: Tangent and cotangent: a half-turn is enough

Their outputs compare two circle coordinates. After a half-turn both coordinates have reversed signs. The ratio is unchanged, so a sideways shift of π returns the same branch shape and height. This is also the smallest positive repeat distance: consecutive tangent zeros are π apart, and so are consecutive cotangent zeros.

  • Rule: tan(x + π) = tan x and cot(x + π) = cot x.
  • Fundamental period: π radians = 180°.
  • Tangent's zeros are exactly nπ. A positive period must carry the zero at 0 to another zero; the smallest possible step is π, and π does repeat the graph.
  • Cotangent's zeros are exactly π2 + nπ. A period must carry one zero to another; the smallest positive spacing is π, and π repeats the graph.
−2π−ππ2π−4−224
y = cot x.
The same idea, five ways
Say it

Say tangent and cotangent repeat every half-turn.

Write it

Adding π to an allowed input keeps the quotient output unchanged.

In math
  • Ptan = Pcot = π
  • tan(x + nπ) = tan x
  • cot(x + nπ) = cot x
  • n any integer
Like

A wallpaper tile the width of one branch repeats immediately.

See it
−2π−ππ2π−4−224
The same picture again: y = cot x.

Worked example

One extra half-turn keeps a tangent value

In plain words, add one half-turn and see whether the quotient changes. Find tan(5π4) from tan(π4).

Show the steps and the answer
knownπ later−2π−ππ2π−4−224
y = tan x, with the points (π/4, 1) and (5π/4, 1).
  1. 5π4=π4+π.Four fourths of π make a half-turn.
  2. The sine and cosine both reverse sign, so their quotient is still 1.Two negatives divide to a positive.
  3. tan(5π4)=tan(π4)=1.The half-turn is a tangent period.
Answer
1.
Double-check At 5π4, sine and cosine are both −22, so direct division also gives 1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: tangent's fundamental period is 2π because a full turn returns to the same circle point.
A full turn does repeat tangent, but a half-turn already repeats the quotient.
✓ Instead: Its smallest positive period is π; 2π is two copies.
Tips and tricks
  • Quotients keep their value when both coordinates reverse.

Part 2: Secant and cosecant: a full turn is needed

Their numerator stays 1. After a half-turn, the denominator changes sign, so the output changes sign. That gives the opposite-height branch. You need a second half-turn to recover the starting denominator and output. For a reciprocal wave, one complete repeating piece therefore includes both its positive and negative parts.

  • Rule: sec(x + 2π) = sec x and csc(x + 2π) = csc x.
  • Fundamental period: 2π radians = 360°.
  • A half-turn gives sec(x + π) = −sec x and csc(x + π) = −csc x.
  • Secant next returns to output 1 after x = 0 at x = 2π; cosecant next returns to output 1 after π2 at 5π2.
−2π−ππ2π−4−224
y = sec x.
The same idea, five ways
Say it

Say secant and cosecant repeat every full turn.

Write it

A shift of π reverses their height; a shift of 2π keeps it.

In math
  • Psec = Pcsc = 2π
  • sec(x + 2nπ) = sec x
  • csc(x + 2nπ) = csc x
Like

Two differently colored wallpaper tiles together make the repeating design.

See it
−2π−ππ2π−4−224
The same picture again: y = sec x.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: the distance between cosecant's asymptotes is π, so its period is π.
The neighboring branches have opposite signs, so the full graph does not match after π.
✓ Instead: Two neighboring branches make a period of 2π.
Tips and tricks
  • Same breaks do not prove the same graph; compare output signs too.

5 How

  1. Select π for tangent or cotangent and 2π for secant or cosecant.
  2. Sketch a complete piece of that width, keeping excluded endpoints out of the graph.
  3. Copy its points and breaks left and right by integer multiples of the period.
  4. For an exact value, add or subtract complete periods to reach a known allowed input.

Choose a complete repeating piece

1
Is the function tangent or cotangent?
YesUse P = π.
NoFor secant or cosecant use P = 2π.
↓
2
Does the proposed shorter shift change the output sign?
YesIt is not a period; include the opposite-sign piece too.
NoCheck that the whole pattern, including forbidden inputs, matches.
  1. Read the function name and choose its fundamental period.
  2. Find a familiar allowed input by adding or subtracting an integer number of periods.
  3. Check the reduced input in the denominator.
  4. Evaluate there or copy the entire graph piece, including its breaks.

6 Worked example

Worked example

Use a period to reach a familiar input

In plain words, remove complete repeating pieces until each input is an angle you know. Find tan(9π4) and csc(5π2).

Show the steps and the answer
knownone period laterπ/23π/25π/2−4−224
y = csc x, for x from 0 to 8.3.
  1. 9π4−2π=9π4−8π4=π4.2π is two tangent periods, so subtracting it preserves tangent's output.
  2. tan(9π4)=tan(π4)=1.The remaining input has equal positive sine and cosine.
  3. 5π2−2π=5π2−4π2=π2.2π is one cosecant period, so subtracting it preserves cosecant's output.
  4. csc(5π2)=csc(π2)=1.The remaining input has sine 1, whose reciprocal is 1.
Answer
  • tan(9π4)=1.
  • csc(5π2) = 1.
Double-check Both original inputs end at the same circle points as the reduced inputs after complete turns. Their denominators are nonzero, so each calculation is permitted.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 4

Remove one quotient period

Find cot(7π4). In plain words, remove one repeat of width π, then find the output at the remaining angle.

Show the steps and the answer
(7π/4, −1)π3π/22π−22
One π-wide cotangent branch contains the point of height −1.
  1. Subtract π=4π4: 7π4−π=3π4.Cotangent repeats every π, so this subtraction preserves its output.
  2. At 3π4, cosine is −22 and sine is 22.This angle is π − π4, so vertical-axis reflection reverses cosine and keeps sine.
  3. Divide to obtain cot(7π4)=cot(3π4)=−1.Equal magnitudes with opposite signs divide to −1, and the sine denominator is nonzero.
Answer
cot(7π4) = −1.
Double-check At 7π4 = −π4 + 2π, cosine is positive and sine negative with equal magnitudes; direct division also gives −1.

Rung 2 of 4

Move a negative input to a familiar angle

Find tan(−7π4). In plain words, add complete tangent repeats until the input becomes a familiar positive angle.

Show the steps and the answer
−7π/4terminal sideinitial side
The clockwise turn ends on the same ray as 45°.
  1. Add 2π=8π4: −7π4+2π=π4.Two tangent periods preserve the output and make the remaining angle familiar.
  2. At π4, sine and cosine are both 22, so tangent is 1.Equal nonzero numbers divide to 1.
Answer
tan(−7π4)=1.
Double-check The original angle reaches the same unit-circle point as π4 after a full turn; its cosine is nonzero, confirming that evaluation is allowed.

Rung 3 of 4

Several reciprocal periods

Find sec(17π3). In plain words, subtract full turns, then use the mirror input to take a known cosine reciprocal.

Show the steps and the answer
−π/3terminal sideinitial side
After three full repeats, the reduced ray has cosine 12.
  1. Subtract 6π=18π3: 17π3−6π=−π3.6π is three full secant periods, so this finds a familiar input with unchanged output.
  2. Use cos(−π3)=cos(π3)=12.Reflecting across the horizontal axis preserves cosine.
  3. Take the reciprocal: 1÷12=2.The denominator is nonzero and secant is its reciprocal.
Answer
sec(17π3) = 2.
Double-check The reduced ray is at −60°, where the horizontal coordinate is positive one half. Multiplying that coordinate by the output gives 12 × 2 = 1.

Rung 4 of 4

A negative reciprocal input and a forbidden input

Find csc(−13π6) and sec(11π2). In plain words, reduce each input by complete periods, then check its own denominator before calculating.

Show the steps and the answer
input reduced function and inputoutput outputcsc(−π/6)−2sec(3π/2)undefined
The two reduced inputs require different denominators; only the sine denominator is nonzero.
  1. Add 2π=12π6 to −13π6, giving −π6.A full cosecant period gives the same output at a familiar negative angle.
  2. sin(−π6)=−12, so csc(−13π6)=−2.Horizontal-axis reflection reverses sine, and the reciprocal of a negative half is −2.
  3. Subtract 4π=8π2 from 11π2, giving 3π2.Two secant periods find an equivalent input for the denominator check.
  4. cos(3π2)=0, so sec(11π2) is undefined.The reduction finds a cosine-zero input, and substituting it into secant's denominator verifies that division is impossible.
Answer
  • csc(−13π6) = −2.
  • sec(11π2) is undefined.
Double-check The first denominator is a nonzero sine, checked by (−12) × (−2) = 1. The second reduced point is (0, −1), whose exact cosine is zero, so no secant output can be assigned.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: every trig function's fundamental period is 2π.
Both coordinates reverse after π, and tangent and cotangent cancel those two sign changes.
✓ Instead: Use π for the quotients and 2π for the reciprocals.
✗ Not this: Counterexample: matching one pair of heights proves a period.
One pair can agree without the rest of the graph matching.
✓ Instead: A period must preserve all allowed outputs and the pattern of excluded inputs.

Tips and tricks

  • Quotients cancel two sign changes; reciprocals have only one to carry.
  • Copy one branch for tan or cot and a positive-negative pair for sec or csc.

7 The trap

Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.

Keep in mind

  • Shifting sec or csc by π flips the sign instead of repeating it: sec 240° = sec(60° + 180°) = −2, the opposite of sec 60° = 2.
  • Periodicity copies the gaps too: every asymptote of tan x sits exactly π from the next one.
  • Only whole periods may be removed: tan(x + 5π) = tan x, but csc(x + 5π) = −csc x.

Memory hook

Tangent is in a hurry: tan and cot repeat every π; sec and csc, like the sin and cos they come from, take the full 2π.

Flash cards

Say the answer out loud, then flip.

What is the fundamental period?
The smallest positive shift that makes the whole graph repeat.
Periods of tan, cot, sec and csc?
  • tan: π
  • cot: π
  • sec: 2π
  • csc: 2π
csc 13π6 = ?
2: 13π6 − 2π = π6, and csc π6 = 2.
tan17π4=?
1: 17π4 − 4π = π4, and tan π4 = 1.
Tangent repeats every π. Does secant repeat every π too?
No: sec(x + π) = −sec x, so secant needs 2π.

Lesson 5 of 9

Tangent and the meaning of a vertical asymptote

Subject: MathematicsLeans on: Coordinates and plottingLeans on: Radian fractions and common denominatorsLeans on: Integer multiplesLeans on: Unit-circle valuesLeans on: Fraction division and signsLeans on: Zero numerator and zero denominatorLeans on: Inequalities and interval endpointsLeans on: Substitution checksLeans on: Quadrant signsOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Imagine walking along a ramp that climbs beside a tall fence. You can move closer to the fence while your height becomes greater than any height you name. The fence marks an input to watch, not a height you reach. A vertical asymptote works that way: nearby outputs grow without bound on at least one side of a vertical line. Unbounded means the outputs pass every fixed ceiling or every fixed floor. Tangent has separate pieces called branches. Each branch is continuous, with no break inside it, and rises as you move right. Its excluded boundary inputs separate those pieces.

Explain it like I am five

Picture cutting 1 pizza into slices: slices of 0.1 pizza make 1 ÷ 0.1 = 10 slices, slices of 0.01 make 100. Tiny divisors give huge answers, and dividing by exactly 0 gives no answer.

Tangent is tan x = sinxcosx. As x creeps up toward π2 ≈ 1.5708 (≈ means about), sin x nears 1 while cos x shrinks toward 0. A calculator in radians shows it: tan 1.5 ≈ 14.10, tan 1.55 ≈ 48.08, tan 1.57 ≈ 1255.77. The heights pass any ceiling you name, so they are unbounded. Right after π2, cos x is tiny and negative, so the heights are hugely negative. At x = π2 itself cos x = 0, and there is no height at all.

So the dashed line x = π2 is a vertical asymptote: a vertical line the graph hugs while its heights grow without bound, with no point on it. Tangent has one wherever cos x = 0, at x = π2 + nπ, and each piece between two of them, a branch, rises from left to right.

2 Picture it

input x in radiansoutput tan x, rounded1.45.79791.514.10141.5548.07851.5692.62051.571255.7656↓ evaluate: input given, read the output below it
These original inputs in radians approach π2 ≈ 1.570796 from the left.

Reminder

Reminder: Coordinates and plotting, Radian fractions and common denominators, Integer multiples, Unit-circle values, Fraction division and signs, Zero numerator and zero denominator, Inequalities and interval endpoints, Substitution checks, Quadrant signs
  • Coordinates and plotting. An ordered pair is (input, output): tan(π4) = 1 gives (π4, 1), with the horizontal coordinate first.
  • Radian fractions and common denominators. To copy a point by π, use π = 4π4: −π4 + π = 3π4.
  • Integer multiples. An integer can be negative, zero, or positive: n = −1 in π2 + nπ gives −π2.
  • Unit-circle values. The circle point lists (cos x, sin x): at π2 it is (0, 1), so tangent divides 1 by 0.
  • Fraction division and signs. Equal nonzero numbers divide to 1; a negative divided by a positive is negative: −22 ÷ 22 = −1.
  • Zero numerator and zero denominator. 01 = 0 is allowed; 10 is undefined because no real number multiplied by 0 gives 1.
  • Inequalities and interval endpoints. (−π2, π2) means −π2 < x < π2, with both endpoints excluded.
  • Substitution checks. After finding a forbidden input, plug it back into the denominator: cos(π2) = 0 verifies the exclusion.
  • Quadrant signs. Quadrant I is upper right, with positive sine and cosine. Quadrant II is upper left, with positive sine and negative cosine.

3 Why

On the unit circle, tan x is the vertical coordinate divided by the horizontal coordinate. Near π2 from the left, sine approaches 1 while positive cosine shrinks toward 0. Dividing a number near 1 by a very small positive number makes a very large positive output. From the right, cosine is small and negative, so the output is very negative. At π2 itself the denominator is zero, so there is no output. Infinity describes unbounded behavior; it is not a value of tangent.

4 The rule

tanx=sinxcosx, with x≠π2+nπ for every integer n.

The vertical asymptotes are x=π2+nπ.Each branch is continuous and increasing; the central branch is on (−π2,π2) and the pattern repeats every π.

The same idea, five ways

Say it

a vertical asymptote is a vertical line near which the outputs become unbounded on at least one side.

Write it

x = π2 is a vertical asymptote of tangent because its nearby outputs become arbitrarily large in magnitude.

In math
  • x=π2
  • x < π2, x approaches π2: tan x grows without bound
  • x > π2, x approaches π2: tan x becomes negative without bound
  • tan(π2) is undefined
  • ∞ is not a real output
Like

You can approach a fence while climbing beyond every height you name; the fence is an input boundary, not the top of the ramp.

See it
(0, 0)(π/4, 1)(−π/4, −1)−π/2π/2−6−4−2246
The x-coordinates are in radians.

The same idea, other ways

As a graph

A vertical asymptote is a vertical line, not a point with an output. The rising central branch runs between x = −π2 and x = π2. It leaves any fixed drawing window near either end, so the edge of the picture is not an endpoint of the function.

−π/2π/2−4−224
In radians, the central branch leaves the visible window as it approaches its two boundary lines.
As smaller portions

One whole divided into tenths gives 10 portions. Divided into hundredths it gives 100 portions. Tangent near π2 behaves similarly because its numerator stays near 1 while its positive denominator becomes tiny. No calculation ever divides by zero or produces an actual infinity.

1 ÷ 0.1 = 10

1 ÷ 0.01 = 100

1 ÷ 0.001 = 1000

Division by 0 is undefined

With nearby inputs

Read the column under 1.4: its output is about 5.7979. The column under 1.57 has output about 1255.7656. Both inputs are less than π2 ≈ 1.570796. They show the approach from the left. Each output is rounded to four decimal places; the table illustrates growth near the boundary, while the shrinking-denominator argument explains why it continues without bound.

input x in radiansoutput tan x, rounded1.45.79791.514.10141.5548.07851.5692.62051.571255.7656↓ evaluate: input given, read the output below it
Compare the highlighted columns in this original table of radian inputs.
As a turning ray

In the central interval, the unit-circle point is on the right half of the circle. The ray from the origin turns from almost straight down to horizontal to almost straight up. Its vertical coordinate divided by its positive horizontal coordinate is tangent. That ratio increases throughout the interval, matching the rising graph.

x = cos θy = sin θtan(π/4) = y ÷ x = 1
At π4 radians, equal positive vertical and horizontal coordinates give tangent 1.
x in radianstan x, rounded to four decimal places
1.45.7979
1.514.1014
1.5548.0785
1.5692.6205
1.571255.7656

Part 1: Vertical asymptote: nearby outputs become unbounded

A one-sided approach means moving toward an input while staying entirely on its left or entirely on its right. You can approach a doorway from either side without standing in the doorway. Near a vertical asymptote, watch the outputs along that approach. For tangent at π2, the left-side outputs grow positively without bound and the right-side outputs grow negatively without bound. That statement concerns nearby accepted inputs. It does not give tangent an output at π2.

  • One-sided approach: stay on one specified side of the input.
  • At π2: tangent grows positively without bound from the left and negatively without bound from the right.
  • Infinity: a description of unbounded growth, not a real output.
  • Not continuous (discontinuous): the complete tangent picture has breaks at its excluded inputs.
  • Continuous: within each branch, the tangent curve has no break.
π/2−12−8−44812
The vertical line is at π2 radians; neither neighboring piece gives an output on that line.
The same idea, five ways
Say it

approach π2 from the left means use smaller and smaller gaps below π2; from the right means use gaps above it.

Write it

tangent has opposite unbounded behavior on the two sides of π2, and it has no value at π2.

In math
  • x<π2
  • x>π2
  • x≠π2
  • tan(π2) is undefined
  • Graph words: unbounded above from the left, unbounded below from the right
Like

Approach a doorway along the hall from its left side or its right side; the direction of approach matters.

See it
π/2−12−8−44812
Around π2 radians, the left piece rises out of the window while the right piece falls out of it.

Worked example

A zero denominator and nearby finite values

Explain tangent at π2, at 1.56, and at 1.58 radians. This asks you to separate the excluded input from accepted inputs on either side of it.

Show the steps and the answer
input x in radiansoutput tan x1.56≈ 92.6205π/2undefined1.58≈ −108.6492↓ evaluate: input given, read the output below it
The middle column is excluded; the nearby radian inputs have finite outputs with opposite signs.
  1. At x=π2, write tanx=10.The unit-circle values are sin(π2) = 1 and cos(π2) = 0; this substitution checks the excluded input.
  2. Reject 10 as undefined.No real output multiplied by 0 gives 1.
  3. Since 1.56 < 1.570796 < 1.58, classify 1.56 as left-side and 1.58 as right-side.π2 is approximately 1.570796 radians, so the inequalities identify the direction of each approach.
  4. Read the two columns: tan(1.56)≈92.6205 and tan(1.58)≈−108.6492.Both denominators are nonzero, so both accepted inputs have finite outputs; these outputs are rounded to four decimal places.
Answer
  • tan(π2) is undefined.
  • tan(1.56) ≈ 92.6205, on the left.
  • tan(1.58) ≈ −108.6492, on the right.
Double-check The supplied coordinate approximations provide a numerical cross-check: at 1.56, sine ≈ 0.9999417202 and cosine ≈ 0.0107961171 give ≈ 92.6205. At 1.58, sine ≈ 0.9999576465 and cosine ≈ −0.0092035433 give ≈ −108.6492. These coordinates are rounded to ten decimal places and supplied for illustration. Your independent circle check is the sign: sine is positive on both sides, cosine is positive on the left and negative on the right. At π2, the exact cosine is 0, so that input is still excluded.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: tan(π2) = ∞.
Infinity is not a real output, and the quotient at this exact input divides by zero.
✓ Instead: tan(π2) is undefined; nearby left-side outputs grow without bound.
Tips and tricks
  • write the side of the approach before deciding whether outputs grow positively or negatively.

Part 2: One tangent branch: three points and two boundary lines

A branch is one connected piece of the graph. Think of one stretch of a road between two closed gates. You may travel inside that stretch without jumping a gap. That is what continuous means here. Increasing means that moving to a larger input within this branch gives a larger output. The central tangent branch starts below every fixed height near its left gate, passes through the origin, and climbs above every fixed height near its right gate. The gates are the excluded inputs −π2 and π2.

  • Branch: one continuous piece between consecutive vertical asymptotes.
  • Increasing: larger inputs within the same branch give larger outputs.
  • Central interval: (−π2, π2), with both endpoints excluded.
  • The central tangent branch passes through the origin, so (0, 0) is both an x-intercept and a y-intercept.
(−π/4, −1)(0, 0)(π/4, 1)−π/2π/2−4−224
On the central radian interval, the graph rises smoothly through the three points.
The same idea, five ways
Say it

one branch is one unbroken piece; increasing means farther right gives higher outputs on that piece.

Write it

the central tangent branch rises continuously between its two excluded boundary inputs.

In math
  • −π2<x<π2
  • (−π2,π2)
  • {x|−π2<x<π2}
  • If −π2 < x1 < x2 < π2, then tan x1 < tan x2.
  • Graph words: one rising branch through the origin
Like

Follow one climbing road between two closed gates without jumping any gap inside the road.

See it
(−π/4, −1)(0, 0)(π/4, 1)−π/2π/2−4−224
The x-coordinates are radians; the three marked points guide a single continuous rising branch.

Worked example

The tangent branch through (−π, 0)

Graph the branch of y = tan x that passes through the point (−π, 0). The three-column table gives exact values on this branch: tan(−4π3) = −3, tan(−π) = 0 and tan(−2π3) = 3. The table lists each input as a count of thirds of π, so −4, −3 and −2 stand for −4π3, −π and −2π3. It shows 3 rounded to 1.732. Find and check the two boundary lines of this branch, plot the three points and draw the branch. Then copy the branch π units right and π units left.

Show the steps and the answer
input x (thirds of π)output tan x−4−1.732−30−21.732↓ evaluate: input given, read the output below it
Three points on the branch of y = tan x through (−π, 0).
  1. Solve cosx=0: x=π2+nπ. The solutions just on either side of −π come from n=−2, giving x=π2−2π=−3π2, and n=−1, giving x=π2−π=−π2. Since −3π2<−π<−π2 and the two are exactly π apart, no other excluded input lies between them. So this branch lives on −3π2<x<−π2.tan x = sinxcosx, so every input with cos x = 0 makes the denominator zero and must be excluded. Two neighboring excluded inputs are the boundary lines of one branch.
  2. Check both boundary inputs on the unit circle. −3π2 is coterminal with −3π2+2π=π2, the point (0, 1), so cos(−3π2)=0 and sin(−3π2)=1. −π2 is the point (0,−1), so cos(−π2)=0 and sin(−π2)=−1. Now draw the dashed vertical lines x=−3π2 and x=−π2.A boundary line is drawn only after the denominator is confirmed to be zero there. At each line the numerator is 1 or −1, not 0. So next to each line, tan x is a nonzero number divided by a number close to zero. There is no value on the line itself, and the values beside it grow without bound.
  3. Confirm the table values as sinx÷cosx. −4π3 is coterminal with 2π3, the point (−12,32), so tan(−4π3)=32÷(−12)=−3. −π is the point (−1,0), so tan(−π)=0÷(−1)=0. −2π3 is coterminal with 4π3, the point (−12,−32), so tan(−2π3)=(−32)÷(−12)=3. Plot (−4π3,−3),(−π,0) and (−2π3,3), placing 3 at about 1.732.Exact unit-circle values give the correct heights. The table's −4, −3 and −2 are thirds of π, so they are exactly these three inputs. All three inputs lie strictly between the boundary lines, so they belong to this branch: −3π2 = −9π6 < −8π6 = −4π3, and −2π3 = −4π6 < −3π6 = −π2.
  4. Draw one smooth rising curve through the three points, kept between the dashed lines. As x approaches −3π2 from the right, the curve drops without bound. As x approaches −π2 from the left, it rises without bound. It never touches either line.Each branch is continuous and increasing. On −3π2 < x < −π2, the matching unit-circle points lie on the left half of the circle, so cos x is negative there. Near x = −3π2, tan x is about 1 divided by a tiny negative number, which is a large negative value. Near x = −π2, it is about −1 divided by a tiny negative number, which is a large positive value.
  5. Add π to every input for the right copy and subtract π for the left copy. Right copy: dashed lines x=−π2 and x=π2, points (−π3,−3), (0, 0) and (π3,3). Left copy: dashed lines x=−5π2 and x=−3π2, points (−7π3,−3),(−2π,0) and (−5π3,3). Draw each copy as its own rising branch between its two lines.The tangent pattern repeats every π. A point moved π units left or right is still on the graph at the same height, and each boundary line x = π2 + nπ moves onto the next one. Neighboring branches share the lines x = −3π2 and x = −π2. Those inputs are excluded, so the branches stay separate and no curve crosses a dashed line.
Answer
The boundary lines (vertical asymptotes) are x = −3π2 and x = −π2. The branch is the continuous increasing curve on −3π2 < x < −π2 through (−4π3, −3), (−π, 0) and (−2π3, 3). It falls without bound as x approaches −3π2 from the right and rises without bound as x approaches −π2 from the left. Copied π units right, it is the branch on −π2 < x < π2 through (−π3, −3), (0, 0) and (π3, 3). Copied π units left, it is the branch on −5π2 < x < −3π2 through (−7π3, −3), (−2π, 0) and (−5π3, 3).
Double-check Recompute two copied points directly. tan(π3) = 32 ÷ 12 = 3, the same height as at −2π3. tan(−π3) = (−32) ÷ 12 = −3, the same height as at −4π3. The zero sits halfway between the boundary lines: (−3π2 − π2) ÷ 2 = −2π ÷ 2 = −π. In decimals, −3π2 ≈ −4.712 < −4π3 ≈ −4.189 < −π ≈ −3.142 < −2π3 ≈ −2.094 < −π2 ≈ −1.571. The heights −1.732, 0 and 1.732 increase in the same order, so all three points are inside the branch and the curve rises. Finally, cos(−4π3) = cos(−2π3) = −12 ≠ 0, so no plotted input is an excluded one.

Work to write

  1. cos x = 0 when x = π2 + nπ; on either side of −π this gives x = −3π2 (n = −2) and x = −π2 (n = −1).
  2. cos(−3π2) = 0 and cos(−π2) = 0, so x = −3π2 and x = −π2 are the dashed boundary lines (vertical asymptotes).
  3. tan(−4π3)=32÷(−12)=−3,tan(−π)=0÷(−1)=0,tan(−2π3)=(−32)÷(−12)=3.
  4. Points plotted: (−4π3, −3), (−π, 0), (−2π3, 3).
  5. One increasing branch on −3π2 < x < −π2: it falls without bound toward x = −3π2 and rises without bound toward x = −π2, never touching either line.
  6. Copies: π right on −π2 < x < π2 through (0, 0); π left on −5π2 < x < −3π2 through (−2π, 0); each copy has its own boundary lines.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: connect the central branch to the next branch across x = π2.
At π2 there is no tangent output, and the neighboring branches have opposite unbounded behavior near that line.
✓ Instead: Keep the branches separate; draw a dashed vertical asymptote at x = π2.
Tips and tricks
  • place the zero between the two boundary lines before drawing the curve.

Part 3: Complete tangent graph: repeat by π

Think of wallpaper made from one repeated panel. Once you draw one panel correctly, you can place identical panels beside it. Tangent works the same way: its period is π, so an input moved π units left or right keeps the same output. The copying refers to pieces of the parent graph, not to making a new function. Every copied branch still rises. Between neighboring branches, the excluded input gives a vertical asymptote. The complete graph is not continuous across those excluded inputs, even though every individual branch is continuous.

  • Period: π.
  • Zeros: x = nπ, because sine is 0 and cosine is 1 or −1 there.
  • Vertical asymptotes: x = π2 + nπ, because cosine is 0 there.
  • Here n is an integer, including negative integers and 0.
−ππ−4−224
The radian graph repeats rising branches and excludes every dashed vertical line.
The same idea, five ways
Say it

move one branch π units sideways and its heights repeat.

Write it

the complete tangent graph repeats each continuous rising branch every π radians.

In math
  • tan(x + π) = tan x
  • tan(x + nπ) = tan x, n an integer
  • x = π2 + nπ: vertical asymptotes
  • x = nπ: zeros
  • Graph words: repeated rising branches
Like

Identical wallpaper panels repeat at a fixed spacing, with a seam between panels.

See it
−ππ−4−224
With the horizontal axis in radians, consecutive rising branches repeat π units apart.

Worked example

The next tangent branch to the right

Sketch the tangent branch on (π2, 3π2). This asks you to copy the central branch one period to the right while keeping all its heights.

Show the steps and the answer
input x in radiansoutput tan x3π/4−1π05π/41↓ evaluate: input given, read the output below it
These copied radian inputs keep the central branch's three output heights.
(3π/4, −1)(π, 0)(5π/4, 1)π/2π3π/2−4−224
The branch is a copy π radians to the right of the central branch.
  1. Move the left boundary from −π2 to −π2+π=π2, and the right boundary to π2+π=3π2.A period of π moves every input π units right without changing its output behavior.
  2. Add π=4π4 to −π4, 0, and π4, giving 3π4,π, and 5π4.Fractions with the same denominator add by their numerators; the copied inputs remain in the same left-to-right order.
  3. Keep the outputs −1, 0, and 1, then draw a rising branch through the corresponding table columns.Tangent's period preserves each output, and the copied branch has the same shape.
  4. Check both boundaries in cosine: cos(π2)=0 and cos(3π2)=0.Substitution verifies that the copied boundary inputs still make the original denominator zero and must be excluded.
Answer
  • Interval: (π2, 3π2).
  • Boundary lines: x = π2, x = 3π2.
  • Points: (3π4, −1), (π, 0), (5π4, 1).
  • Shape: one continuous rising branch.
Double-check Check the points directly on the unit circle: at 3π4 sine and cosine have equal magnitudes and opposite signs, giving −1; at π the numerator is 0 and the denominator is −1; at 5π4 both coordinates are equal and negative, giving 1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: put tangent's vertical asymptotes at x = nπ.
At those inputs cosine is 1 or −1, while sine is 0, so tangent has output 0.
✓ Instead: Put tangent's zeros at x = nπ and its vertical asymptotes at x = π2 + nπ.
Tips and tricks
  • tangent's zero is halfway between consecutive asymptotes.

5 How

  1. Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.
  2. For the central branch, use x = −π2 and x = π2. Check cos(−π2) = 0 and cos(π2) = 0 before drawing the dashed vertical lines.
  3. Plot (−π4, −1), (0, 0), and (π4, 1), using the exact unit-circle values in the worked example's three-column table.
  4. Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.
  5. Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.

Sketch tangent from its denominator, points, and period

1
Is cos x = 0 at the input?
YesExclude the input and draw its vertical asymptote; the quotient is undefined there.
NoThe input is accepted; evaluate sine divided by cosine.
↓
2
Does the question ask for only one branch?
YesStay between the two specified consecutive asymptotes.
NoCopy the branch by π to cover the requested interval.
↓
3
Does the question ask what happens near an asymptote?
YesChoose the left or right side, then use the numerator and denominator signs.
NoGive the exact accepted values or the sketch requested.
  1. Find and check the zeros of cosine to locate excluded inputs.
  2. Draw two consecutive boundary lines and mark the zero halfway between them.
  3. Use quarter-π offsets from that zero to place heights −1 and 1.
  4. Draw one continuous rising branch, then repeat it every π.

6 Worked example

Worked example

The tangent branch through (π, 0) and its vertical asymptotes

Graph the branch of y = tan x that passes through the point (π, 0). The three-column table gives exact values on this branch: tan(3π4) = −1, tan(π) = 0 and tan(5π4) = 1. The table lists the inputs as multiples of π, so 0.75, 1 and 1.25 stand for 3π4, π and 5π4. (a) Use cos x = 0 to find the two vertical asymptotes that bound this branch, and check that cos x = 0 at each one. (b) Confirm the three table values from the unit-circle values of sin x and cos x, then plot the three points. (c) Describe what the graph does as x approaches each asymptote from inside the branch, and explain why the graph never meets the line x = 3π2. (d) Copy the branch π units left and π units right, and list every vertical asymptote in the three-branch sketch.

Show the steps and the answer
input x (as a multiple of π)output tan x0.75−1101.251↓ evaluate: input given, read the output below it
Three-column table for the branch of y = tan x through (π, 0).
  1. Solve cosx=0. On the unit circle, cos x is 0 only at the top point (0, 1) and the bottom point (0,−1), so x=π2+nπ for every integer n: …, −π2,π2,3π2,5π2, … The nearest of these on each side of π are x=π2 on the left and x=3π2 on the right.tan x = sinxcosx, so any input that makes the denominator cos x equal 0 has no tangent value and must be excluded. The branch through (π, 0) runs from the nearest excluded input on the left of π to the nearest excluded input on the right of π.
  2. Check both boundary inputs before drawing: cos(π2)=0 (with sin(π2)=1) and cos(3π2)=0 (with sin(3π2)=−1). Then draw dashed vertical lines x=π2 and x=3π2. They are 3π2−π2=π apart, which is the width of one branch.A dashed line belongs only where the denominator really is 0. Do not draw one where sin x = 0. At x = π, tan(π) = 0 ÷ (−1) = 0, so that input gives a point on the graph and does not give an asymptote.
  3. Confirm the table with exact unit-circle values. At 3π4: cosx=−22 and sinx=22, so tan(3π4)=22÷(−22)=−1. At π: cosx=−1 and sinx=0, so tan(π)=0÷(−1)=0. At 5π4: cosx=−22 and sinx=−22, so tan(5π4)=(−22)÷(−22)=1. Plot (3π4,−1),(π,0) and (5π4,1).Exact values give exact points. 3π4 is halfway between π2 and π, and 5π4 is halfway between π and 3π2. The three points therefore mark the center of the branch and one point on each side of it.
  4. Find the sign of tan x close to each line. Just right of π2 (Quadrant II), sin x is close to 1 and cos x is a small negative number, so the quotient is a large negative number. Just left of 3π2 (Quadrant III), sin x is close to −1 and cos x is a small negative number, so the quotient is a large positive number.Dividing a number near 1 or −1 by a number shrinking toward 0 gives outputs that grow past any bound. The signs of sin x and cos x decide whether the curve heads down or up.
  5. Draw one smooth rising curve through the three points. As x approaches π2 from the right, the curve drops without bound beside that dashed line. As x approaches 3π2 from the left, the curve rises without bound beside the other dashed line. The curve gets ever closer to each line but never touches or crosses it.Each branch of tangent is continuous and increasing on its open interval. The inputs x = π2 and x = 3π2 are outside the domain, so no point of the graph can lie on those lines. That is the meaning of a vertical asymptote: an excluded input where the outputs grow without bound as the inputs close in on it.
  6. Copy the branch π units left and π units right. Subtract π from each point to get (−π4,−1), (0, 0) and (π4,1) between x=−π2 and x=π2. Add π to each point to get (7π4,−1),(2π,0) and (9π4,1) between x=3π2 and x=5π2. Draw the new dashed lines x=−π2 and x=5π2, and keep every curve separate from every line.Tangent repeats every π, so tan(x + π) = tan x and tan(x − π) = tan x. Moving every point of one branch by π gives the neighboring branch. Moving a line x = π2 + nπ by π gives another line of the same form.
Answer
The branch lies between the vertical asymptotes x = π2 and x = 3π2, where cos x = 0. It passes through (3π4, −1), (π, 0) and (5π4, 1) and rises from left to right. It drops without bound as x approaches π2 from the right and rises without bound as x approaches 3π2 from the left. It never meets x = 3π2 because cos(3π2) = 0, which leaves tan x = sinxcosx undefined there. The three-branch sketch has vertical asymptotes x = −π2, x = π2, x = 3π2 and x = 5π2. The copied branches pass through (−π4, −1), (0, 0), (π4, 1) and through (7π4, −1), (2π, 0), (9π4, 1).
Double-check Shift check: 3π4 − π = −π4, and tan(−π4) = (−22) ÷ 22 = −1, which matches tan(3π4). Also 5π4 − π = π4, and tan(π4) = 1, which matches tan(5π4). Rising check: the outputs −1, 0, 1 increase as the inputs 3π4, π, 5π4 increase. Asymptote check on a calculator in radian mode: π2 ≈ 1.571 and tan(1.6) ≈ −34.23, a large negative value just right of the left line. Also 3π2 ≈ 4.712 and tan(4.7) ≈ 80.71, a large positive value just left of the right line. Both match the drawn ends.

Work to write

  1. cos x = 0 when x = π2 + nπ, so the branch through (π, 0) lies between x = π2 and x = 3π2
  2. cos(π2) = 0 and cos(3π2) = 0, so the dashed asymptotes are x = π2 and x = 3π2
  3. tan(3π4)=22÷(−22)=−1
  4. tan(π)=0÷(−1)=0
  5. tan(5π4)=(−22)÷(−22)=1
  6. Plot (3π4, −1), (π, 0) and (5π4, 1), then draw one smooth rising curve through them
  7. As x approaches π2 from the right, tan x drops without bound; as x approaches 3π2 from the left, tan x rises without bound
  8. x = 3π2 is not in the domain because cos(3π2) = 0, so the graph never touches that line
  9. Copies: (−π4, −1), (0, 0), (π4, 1) and (7π4, −1), (2π, 0), (9π4, 1)
  10. Asymptotes in the sketch: x = −π2, x = π2, x = 3π2, x = 5π2

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 4

Plot the central zero

Find and plot tan 0. This means use the input 0 radians, find its output, and place that input and output on the graph.

Show the steps and the answer
(0, 0)−π/2π/2−22
The input 0 radians gives the point at the origin.
  1. Use sin0=0 and cos0=1.The unit-circle point at 0 is (1, 0), with cosine first and sine second.
  2. Divide 01=0 and plot (0, 0).A zero numerator divided by a nonzero denominator is 0; graph coordinates put the input first.
Answer
  • tan 0 = 0.
  • Point: (0, 0).
Double-check On the turning-ray picture, the point on a horizontal ray has vertical coordinate 0 and a positive horizontal coordinate, so its tangent ratio is 0.

Rung 2 of 4

Add the quarter-π points

Add tan(−π4) and tan(π4) to the central sketch. This asks for the heights at the two inputs on either side of 0.

Show the steps and the answer
input x in radiansoutput tan x−π/4−100π/41↓ evaluate: input given, read the output below it
The highlighted radian inputs add the two heights beside the zero.
−101−π/2π/2−4−224
In radians, these three points lie on one rising branch.
  1. At π4, divide 22 by 22 to get 1.Sine and cosine are equal and nonzero there.
  2. At −π4, divide −22 by 22 to get −1.Sine is negative and cosine positive, with equal magnitudes.
  3. Plot (−π4,−1), (0, 0), and (π4,1), then connect them with a smooth rising curve inside the boundary lines.The accepted inputs and outputs in the table guide the continuous increasing branch.
Answer
  • tan(−π4)=−1.
  • tan(π4)=1.
  • Central branch: rises through the three points.
Double-check A half-turn about the origin sends (π4, 1) to (−π4, −1), which matches tangent's odd symmetry.

Rung 3 of 4

Copy one full tangent branch

Copy the central tangent branch one period to the right. This asks you to add π to its inputs, keep its outputs, and identify the new boundary lines.

Show the steps and the answer
input x in radiansoutput tan x3π/4−1π05π/41↓ evaluate: input given, read the output below it
The copied radian inputs retain the original output row.
−101π/2π3π/2−4−224
This rising branch is one period, π radians, to the right.
  1. Move the interval endpoints: −π2+π=π2 and π2+π=3π2.A horizontal copy by the period adds π to every input.
  2. Move the key inputs: −π4+4π4=3π4,0+π=π, and π4+4π4=5π4.Common denominators let you add the π fractions while preserving their order.
  3. Keep the respective outputs −1, 0, and 1 and draw the rising branch.Period π means tangent's outputs repeat after π.
  4. Check cos(π2)=0 and cos(3π2)=0.Plugging the endpoints into the denominator confirms that both are excluded rather than plotted points.
Answer
  • New interval: (π2, 3π2).
  • Boundary lines: x = π2, x = 3π2.
  • Key points: (3π4, −1), (π, 0), (5π4, 1).
Double-check Use unit-circle signs at 3π4 and 5π4: equal magnitudes with opposite signs give −1, and equal negative signs give 1. At π, sine is 0 and cosine is −1, giving the zero at the branch's center.

Rung 4 of 4

Explain both sides near π2

Use the original near-asymptote table and tan(1.58) ≈ −108.6492 to explain the behavior at π2. This asks why nearby finite outputs become large, why their signs differ across the line, and whether π2 itself has an output.

input x in radiansoutput tan x, rounded1.45.79791.514.10141.5548.07851.5692.62051.571255.7656π/2undefined1.58−108.6492
A table of 7 values of tan x, rounded, for x in radians from 1.4 to 1.58.
Show the steps and the answer
input x in radiansoutput tan x, rounded1.45.79791.514.10141.5548.07851.5692.62051.571255.7656π/2undefined1.58−108.6492↓ evaluate: input given, read the output below it
The radian table distinguishes the last left input, the excluded boundary, and a right-side input.
π/2−12−8−44812
The curve's opposite unbounded behavior is visible on the two sides of π2 radians.
  1. Compare each input in the main table with π2≈1.570796: all five are smaller, and the gaps shrink from left to right.This identifies a one-sided approach from below; the inputs remain accepted radian inputs.
  2. Read the output row from the column under 1.4 to the column under 1.57: the rounded heights rise from 5.7979 to 1255.7656.The shrinking positive cosine denominator makes the quotient increasingly large.
  3. Compare 1.58 > 1.570796 and use quadrant II signs to explain its output ≈−108.6492.Right of π2, sine stays positive but cosine becomes negative, so tangent is negative; this output is rounded to four decimal places.
  4. At π2, substitute cos(π2)=0 and reject the quotient.The denominator check excludes the boundary input. Neither the table nor the phrase unbounded gives it a real value.
Answer
  • Left approach: tangent grows positively without bound.
  • Right approach: tangent grows negatively without bound.
  • At π2: tangent is undefined.
  • The displayed nearby outputs are finite and rounded to four decimal places.
Double-check Rebuild the reason without the table: sine tends toward 1, and cosine tends toward 0 with a positive sign on the left and a negative sign on the right. The supplied ten-decimal approximations sin(1.57) ≈ 0.9999996829 and cos(1.57) ≈ 0.0007963267 also give a quotient ≈ 1255.7656. You do not need to calculate a decimal-angle sine or cosine on your own to explain this growth.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: a vertical asymptote means only that a curve never touches a vertical line.
Avoiding a line does not say that nearby outputs are unbounded. A missing point at an ordinary finite height would also leave a line untouched.
✓ Instead: Define a vertical asymptote by unbounded nearby outputs on at least one side; for these parent graphs, the input on that line is excluded.
✗ Not this: Counterexample: tan(π2) = ∞ because the table values are large.
Every displayed accepted input has a finite output. At π2 the denominator is exactly 0, and infinity is not a real value.
✓ Instead: tan(π2) is undefined; its nearby outputs become unbounded.
✗ Not this: Counterexample: tangent is increasing across its entire domain, including across an asymptote.
Increasing applies within each branch. A point immediately left of π2 has a large positive output, while a larger input immediately right has a large negative output.
✓ Instead: Each tangent branch is increasing; compare inputs within the same branch when using that statement.
✗ Not this: Counterexample: every zero denominator proves a vertical asymptote. The formula xx has a zero denominator at x = 0.
For every nonzero x the quotient is 1: at 0.1 it is 0.1 ÷ 0.1 = 1, and at 0.01 it is 0.01 ÷ 0.01 = 1. The nearby outputs stay finite because the numerator shrinks too.
✓ Instead: A denominator zero locates an excluded input. To establish a vertical asymptote, also show unbounded nearby outputs. For tan, cot, sec and csc the numerator stays nonzero at each denominator zero.

Tips and tricks

  • tangent rises on every branch. Put its zero halfway between its two boundary lines.
  • write undefined at the exact asymptote input. Write unbounded for the nearby behavior.
  • rebuild the boundary locations from cos x = 0 instead of guessing from the shape.

7 The trap

Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.

Keep in mind

  • Infinity is not an output: tan 1.57 ≈ 1255.77 is huge but finite, and at the asymptote input itself there is no value.
  • Rising holds inside one branch only: tan 1.57 ≈ 1255.77, yet the larger input 1.58 gives about −108.65, across the asymptote.
  • Tangent's zeros sit halfway between neighboring asymptotes, at x = nπ, so never draw a wall at a zero.

Memory hook

Tangent climbs toward walls it never touches; the walls stand where cosine is 0, at π2 + nπ, and each branch crosses 0 halfway between two walls.

Flash cards

Say the answer out loud, then flip.

What is a vertical asymptote?
  • A vertical line x = a near which the graph's heights grow without bound
  • for tan, cot, sec and csc the graph has no point on it.
What does unbounded mean?
The heights pass every ceiling, or every floor, you could name.
Name the asymptotes of tan x between 2π and 4π.
x = 5π2 and x = 7π2.
Is tan 1.6 positive or negative?
  • Negative: 1.6 is past π2 ≈ 1.5708, in Quadrant II
  • tan1.6≈−34.2.
True or false: tan 5π2 = ∞.
False: cos 5π2 = 0, so tan 5π2 is undefined. ∞ is not a number.

Lesson 6 of 9

Cotangent: the branch that falls

Subject: MathematicsLeans on: Coordinates and plottingLeans on: Radian fractionsLeans on: Integer multiplesLeans on: Unit-circle coordinatesLeans on: Fraction division and signsLeans on: Zero numerator and denominatorLeans on: Inequalities and interval endpointsLeans on: Substitution checksLeans on: Odd symmetryLeans on: Quadrant signsOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Picture a road that descends between two closed gates. Near the first gate it is higher than any height you name. As you walk right, it drops through height 1, then 0, then −1, and keeps dropping near the second gate. That is one cotangent branch. Decreasing means a larger input gives a smaller output within that branch. The gates sit at 0 and π radians because those inputs make sine zero. Inside the gates, cotangent is continuous. At the midpoint π2, it has the ordinary output 0, even though tangent has no output there.

Explain it like I am five

Picture a playground slide squeezed between two walls. Near the left wall it starts higher than any ladder; it slopes down, passes ground level exactly halfway, and near the right wall it drops deeper than any pit. That is one branch (one unbroken piece) of cotangent, cot x = cosxsinx, cosine divided by sine.

The walls stand where the bottom, sin x, is 0: at x = 0, at x = π, and at every multiple nπ (n any integer). Between them sine is positive while cosine slides from 1 to −1, so the fraction falls. Three points, with 22 (root 2 over 2, about 0.71):
at π4, 22 ÷ 22 = 1;
at π2, 0 ÷ 1 = 0;
at 3π4, −22 ÷ 22 = −1.

So the branch passes (π4, 1), (π2, 0) and (3π4, −1), falling from left to right. Decreasing means exactly this: a bigger input gives a smaller output. The same branch repeats every π.

2 Picture it

input x in radiansoutput cot x0undefinedπ/41π/203π/4−1πundefined↓ evaluate: input given, read the output below it
The highlighted radian inputs give falling heights; the two endpoint columns are excluded.

Reminder

Reminder: Coordinates and plotting, Radian fractions, Integer multiples, Unit-circle coordinates, Fraction division and signs, Zero numerator and denominator, Inequalities and interval endpoints, Substitution checks, Odd symmetry, Quadrant signs
  • Coordinates and plotting. Put input first: cot(3π4) = −1 gives the point (3π4, −1).
  • Radian fractions. To copy left, subtract π with a common denominator: π4 − 4π4 = −3π4.
  • Integer multiples. x = nπ includes −π, 0, and π by taking n = −1, 0, and 1.
  • Unit-circle coordinates. At π2 the circle point is (0, 1), so cosine is 0 and sine is 1; cotangent uses 0 ÷ 1.
  • Fraction division and signs. A negative divided by a positive is negative: −22 ÷ 22 = −1.
  • Zero numerator and denominator. 01 = 0 is allowed, but 10 is undefined. Check the denominator before dividing.
  • Inequalities and interval endpoints. (0, π) excludes both endpoints; (0, π2] excludes 0 and includes π2.
  • Substitution checks. After locating a boundary, put it back into the denominator: sin π = 0 confirms that π must be excluded.
  • Odd symmetry. A half-turn changes both coordinates: (π4, 1) pairs with (−π4, −1).
  • Quadrant signs. Quadrant I is upper right, so cos ÷ sin is positive. Quadrant II is upper left, so negative cos ÷ positive sin is negative.

3 Why

Cotangent divides cosine by sine. On 0 < x < π, sine is positive. Cosine changes from positive to 0 to negative, so cotangent passes from positive through 0 to negative. The unit-circle ray turns from almost horizontal right to vertical to almost horizontal left; horizontal coordinate divided by positive vertical coordinate decreases throughout. Near 0 the quotient grows positively without bound; near π it grows negatively without bound. Adding π changes both signs and leaves their quotient unchanged.

4 The rule

cotx=cosxsinx, with x≠nπ for every integer n.

Its vertical asymptotes are x=nπ and its period is π.
On (0,π), the continuous decreasing branch passes through (π4,1),(π2,0), and (3π4,−1).

The same idea, five ways

Say it

cotangent decreases within each branch, so farther right gives a lower output before the next asymptote.

Write it

the cotangent branch on (0, π) falls continuously from unbounded positive heights to unbounded negative heights.

In math
  • cot x = cosxsinx
  • 0 < x < π
  • (0, π)
  • {x | 0 < x < π}
  • If 0 < x1 < x2 < π, then cot x1 > cot x2.
  • cot(π2) = 0
  • x = nπ: vertical asymptotes
  • Graph words: separate falling branches
Like

Walk down a road between two closed gates; every move right within this stretch puts you lower.

See it
(π/4, 1)(π/2, 0)(3π/4, −1)π/2π−4−224
With x in radians, the branch falls through the three marked points between 0 and π.

The same idea, other ways

As a falling road

Begin immediately right of 0, where the branch is high and positive. Move right through the point of height 1, cross the horizontal axis at π2, and continue through height −1. The curve stays continuous inside the interval and drops without bound near π from the left.

10−1π/2π−4−224
The radian branch travels from positive heights through zero to negative heights.
As a unit-circle ratio

Cotangent is horizontal coordinate divided by vertical coordinate. At π2 the point is (0, 1), so the quotient is 0 ÷ 1 = 0. Tangent reverses that order and would divide 1 by 0. The two formulas do not have the same domain.

x = cos θy = sin θcot(π/2) = 0 ÷ 1 = 0
At π2 radians, cotangent divides the horizontal coordinate 0 by the vertical coordinate 1.
As three columns

The output under π4 is 1, the output under π2 is 0, and the output under 3π4 is −1. Read the highlighted columns from left to right: their heights fall. The graph extends beyond those three sample heights without a highest or lowest output, so its range is all real numbers.

input x in radiansoutput cot xπ/41π/203π/4−1↓ evaluate: input given, read the output below it
Increasing radian inputs on this branch give the three decreasing output heights.
x in radianscot x
0undefined
π41
π20
3π4−1
πundefined

5 How

  1. Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.
  2. For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.
  3. Read the three table columns to plot (π4, 1), (π2, 0), and (3π4, −1).
  4. Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.
  5. Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.

Sketch cotangent from sine zeros and a falling branch

1
Is sin x = 0 at the requested input?
YesThe cotangent output is undefined; use the input as a vertical asymptote.
NoUse cosine divided by sine to evaluate the accepted input.
↓
2
Is tangent undefined at this input?
YesStill use cosine divided by sine. Cotangent can be defined even when tangent is undefined.
NoThe quotient formula remains valid; do not replace its domain check.
↓
3
Does the question ask for more than the branch on (0, π)?
YesCopy the falling branch every π and retain separate asymptotes.
NoDraw only the continuous branch between 0 and π.
  1. Locate and check the sine zeros to draw boundary lines at consecutive multiples of π.
  2. Mark the zero halfway between the boundaries.
  3. Mark height 1 one quarter-period after the left boundary and height −1 one quarter-period before the right boundary.
  4. Draw the falling continuous branch, then copy it every π.

6 Worked example

Worked example

The cotangent branch between π and 2π

Graph the branch of y = cot x that passes through the point (3π2, 0), then extend the graph using the period. The three-column table gives exact values on this branch: cot(4π3) = 33, cot(3π2) = 0 and cot(5π3) = −33. The table lists each input as a count of sixths of π, so 8, 9 and 10 stand for 8π6, 9π6 and 10π6. It rounds the outputs to two decimal places: 0.58, 0 and −0.58.

Show the steps and the answer
input x (sixths of π)output cot x (to 2 decimal places)80.589010−0.58↓ evaluate: input given, read the output below it
Table of y = cot x on the branch between π and 2π.
  1. Solve sinx=0. Sine is zero at x= …, −π, 0, π,2π,3π, …, which is x=nπ for every integer n. Exclude these inputs, so the domain of y=cotx is x≠nπ.cot x = cosxsinx has sin x in the denominator, and division by 0 is undefined. At x = nπ the numerator cos x is 1 or −1, not 0. So the size of the quotient grows without bound near x = nπ, which makes each line x = nπ a vertical asymptote.
  2. Since π<3π2<2π, the branch through (3π2,0) lies between π and 2π, two neighboring zeros of sine. Draw dashed vertical lines at x=π and x=2π. Plug the endpoints back into sine: sinπ=0 and sin2π=0.A cotangent branch runs from one asymptote to the next. No multiple of π lies strictly between π and 2π, so the curve is unbroken there. Checking sine at both endpoints confirms that the dashed lines sit exactly where the denominator is zero.
  3. Read the three table columns. Convert each input: 8π6=4π3,9π6=3π2 and 10π6=5π3. Pair them with the exact outputs 33, 0 and −33, which the table shows as 0.58, 0 and −0.58. Plot (4π3,33),(3π2,0) and (5π3,−33).The table counts sixths of π so that every input is a whole number. Dividing a count by 6 and simplifying turns it back into an angle. All three inputs lie between π and 2π. The zero sits exactly halfway between the asymptotes, because (π + 2π) ÷ 2 = 3π2.
  4. Draw one smooth curve through the three points that falls from left to right. On the right side of x=π the curve rises without bound along the dashed line. On the left side of x=2π it falls without bound.On the interval (π, 2π), sin x is negative. Just right of π, cos x is near −1 and sin x is a tiny negative number, so cosxsinx is a large positive number. Just left of 2π, cos x is near 1 and sin x is a tiny negative number, so the quotient is a large negative number. The table agrees: as x increases, the outputs go 33, then 0, then −33.
  5. Copy the branch every π units. Moving the three points π to the left gives (π3,33),(π2,0) and (2π3,−33) between x=0 and x=π. Moving them π to the right gives (7π3,33),(5π2,0) and (8π3,−33) between x=2π and x=3π. Draw a dashed asymptote at every x=nπ and keep each copy separate there.Cotangent has period π, so cot(x + π) = cot x. Every branch is therefore the same falling curve shifted by a multiple of π. The function is undefined at each x = nπ, so no copy is joined to its neighbor across an asymptote.
Answer
The branch lies between the dashed asymptotes x = π and x = 2π. It passes through (4π3, 33), (3π2, 0) and (5π3, −33) and falls from left to right. It rises without bound as x approaches π from the right and falls without bound as x approaches 2π from the left. The full graph repeats this branch between x = nπ and x = (n + 1)π for every integer n, with a dashed asymptote at each x = nπ.
Double-check Compute the table values from cot x = cosxsinx. First, cos(4π3) = −12 and sin(4π3) = −32, so cot(4π3) = (−12) ÷ (−32) = 13 = 33 ≈ 0.58. Next, cos(3π2) = 0 and sin(3π2) = −1, so cot(3π2) = 0. Last, cos(5π3) = 12 and sin(5π3) = −32, so cot(5π3) = −33 ≈ −0.58. The left copy also agrees with the rule's branch on (0, π). The point (π3, 33) falls between (π4, 1) and (π2, 0), and (2π3, −33) falls between (π2, 0) and (3π4, −1).

Work to write

  1. sin x = 0 at x = nπ, so cot x is undefined there: x ≠ nπ
  2. Asymptotes x = π and x = 2π; sin π = 0 and sin 2π = 0
  3. 8π6=4π3,9π6=3π2,10π6=5π3
  4. Plot (4π3, 33), (3π2, 0), (5π3, −33)
  5. Falling branch: rises without bound just right of x = π, falls without bound just left of x = 2π
  6. Period π: copy the branch between each x = nπ and x = (n + 1)π, kept separate at x = nπ

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 4

Evaluate the midpoint zero

Find cot(π2). This asks for the output at the accepted input π2, so use cotangent's own denominator rather than tangent's domain.

Show the steps and the answer
x = cos θy = sin θcos = 0, sin = 1
The point at π2 radians verifies cotangent's allowed zero output.
  1. Read cos(π2)=0 and sin(π2)=1 from the unit-circle point (0, 1).The first coordinate is cosine, and the second is sine.
  2. Check that the denominator 1 is nonzero, then calculate 01=0.Division is allowed when the denominator is nonzero, including when the numerator is 0.
Answer
cot(π2) = 0.
Double-check The unit-circle point on the vertical ray at π2 has horizontal coordinate 0 and positive vertical coordinate 1. Their cotangent ratio is therefore 0.

Rung 2 of 4

Draw the positive half of the branch

Sketch cotangent for 0 < x ≤ π2, including its point at π4. This asks for the positive half of a branch and the midpoint zero, while excluding 0.

Show the steps and the answer
input x in radiansoutput cot x0undefinedπ/41π/20↓ evaluate: input given, read the output below it
The radian input 0 is excluded, while the highlighted columns provide two allowed points.
(π/4, 1)(π/2, 0)π/21234
The positive half-branch falls from the asymptote to its included zero at π2 radians.
  1. Exclude 0 because sin0=0; draw the dashed line x=0.Substitution finds and verifies the zero denominator at the left boundary.
  2. At π4, divide 22 by itself to get 1, then plot (π4,1).Equal nonzero cosine and sine values give the quotient 1.
  3. Include (π2,0) and draw a falling curve toward it from high positive heights near 0.The denominator is positive inside this half-interval, and the quotient decreases toward its allowed zero.
Answer
  • Excluded boundary: x = 0.
  • Points: (π4, 1), (π2, 0).
  • Shape: positive and falling on (0, π2), with the zero at π2 included.
Double-check Quadrant I has positive sine and cosine, so cotangent must stay positive before π2; the axis point at π2 supplies the included zero.

Rung 3 of 4

Complete the falling branch

Complete the cotangent sketch on (0, π). This asks you to add the negative half and explain why π, like 0, is excluded.

Show the steps and the answer
input x in radiansoutput cot xπ/41π/203π/4−1↓ evaluate: input given, read the output below it
The last highlighted radian column supplies the point that completes the branch.
10−1π/2π−4−224
The complete radian branch falls through all three points toward its right asymptote.
  1. At 3π4, divide −22 by 22 to get −1.Cosine is negative and sine positive, with equal nonzero magnitudes.
  2. Plot (3π4,−1) after the midpoint zero and continue the smooth falling curve.The output row falls from 1 to 0 to −1 as the radian inputs increase.
  3. Check sinπ=0 and draw x=π as the right vertical asymptote.This denominator check excludes the endpoint rather than assigning it a value.
  4. Extend the curve negatively without bound near π from the left.Cosine is near −1 while sine is tiny and positive, so their quotient is very negative.
Answer
  • Points: (π4, 1), (π2, 0), (3π4, −1).
  • Boundary lines: x = 0, x = π.
  • Shape: one continuous falling branch with unbounded ends.
Double-check In quadrant II cosine is negative and sine positive, so the added half must be negative. That independent sign check agrees with the point at 3π4 and the downward right end.

Rung 4 of 4

Repeat left and check origin symmetry

Sketch the cotangent branch on (−π, 0) and check its points using odd symmetry. This asks you to copy the known branch one period left, then verify it by a half-turn about the origin.

Show the steps and the answer
input x in radiansoutput cot x−3π/41−π/20−π/4−1↓ evaluate: input given, read the output below it
The negative radian inputs retain the falling output pattern 1, 0, −1.
(−3π/4, 1)(−π/2, 0)(−π/4, −1)(π/4, 1)(3π/4, −1)−π−π/2π/2π−4−224
The radian branches repeat by π and pair under a half-turn about the origin.
  1. Subtract π from the boundaries 0 and π to get −π and 0.Period π preserves the branch's output pattern one π unit left.
  2. Subtract π=4π4 from the key inputs: π4−π=−3π4,π2−π=−π2, and 3π4−π=−π4.Common denominators let you subtract the π fractions exactly.
  3. Keep the corresponding outputs 1, 0, and −1, and draw one falling branch.The copied input columns retain the original output row.
  4. Check sin(−π)=0 and sin0=0, so both new boundary inputs remain excluded.Plugging the boundaries into cotangent's denominator confirms the two vertical asymptotes.
  5. Rotate (π4,1) to (−π4,−1), and (3π4,−1) to (−3π4,1).Odd symmetry changes the signs of both coordinates and checks the copied points a second way.
Answer
  • Interval: (−π, 0).
  • Boundary lines: x = −π, x = 0.
  • Points: (−3π4, 1), (−π2, 0), (−π4, −1).
  • Shape: a continuous falling branch, matching origin symmetry.
Double-check Use the quotient directly at −π4: cosine is positive and sine negative with equal magnitudes, so cotangent is −1. At −3π4, both cosine and sine are −22, so their quotient is 1, agreeing with the copied and rotated points.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: cot(π2) is undefined because tan(π2) is undefined.
Cotangent's quotient has sine in the denominator, and sine at π2 equals 1. The expression 1 divided by tangent is unavailable when tangent itself is undefined.
✓ Instead: Use cosine divided by sine: cot(π2) = 01 = 0. The reciprocal identity cot x = 1tanx requires both sides to be defined.
✗ Not this: Counterexample: draw a rising cotangent branch through (π4, 1), (π2, 0), and (3π4, −1).
Those outputs decrease from 1 to 0 to −1 as the inputs increase. A rising curve contradicts its own plotted points.
✓ Instead: Draw a falling branch between consecutive multiples of π.

Tips and tricks

  • cotangent falls, and its zero is midway between consecutive multiples of π.
  • use cotangent's own quotient cos x divided by sin x when checking whether an input is allowed.
  • the whole branch reaches every real output, so cotangent has no highest or lowest height and no amplitude.

7 The trap

Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at π2 that gives the valid output 0.

Keep in mind

  • Cotangent's walls are sine's zeros, x = nπ, not cosine's: cot x is fine at π2, where it equals 0.
  • Do not compute cot x as 1 ÷ tan x where tan x is undefined; cosxsinx gives cot π2 = 01 = 0 directly.
  • Near the left wall the heights are huge and positive, near the right wall huge and negative: cot 0.1 ≈ 9.97 and cot 3 ≈ −7.02.

Memory hook

Tangent climbs, cotangent slides: tan rises between its walls, while cot falls between walls at 0, π, 2π, crossing zero halfway.

Flash cards

Say the answer out loud, then flip.

Where are cotangent's vertical asymptotes?
x = nπ, where sin x = 0.
Does a cotangent branch rise or fall from left to right?
It falls: cotangent is decreasing on each branch.
Is cot 2.8 positive or negative?
Negative: 2.8 is between π2 ≈ 1.57 and π ≈ 3.14, where cosine is negative and sine positive.
cot 7π4 = ?
−1: 7π4 − π = 3π4, and the branch passes (3π4, −1).
True or false: cot 5π2 is undefined because tan 5π2 is.
False: sin 5π2 = 1, not 0, so cot 5π2 = 01 = 0.

Lesson 7 of 9

Cosecant: build a reciprocal graph from sine

Subject: MathematicsLeans on: CoordinatesLeans on: RadiansLeans on: Unit-circle sineLeans on: Reciprocals and fraction divisionLeans on: Negative divisionLeans on: Rationalizing a denominatorLeans on: Zero denominatorLeans on: Integer multiplesLeans on: Intervals and unionLeans on: RangeLeans on: Odd symmetryLeans on: PeriodLeans on: Vertical asymptoteOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Imagine a machine that keeps your position along a road but changes the height written on your sign. A height of one stays one. A height of one half becomes two. A negative height stays negative when the machine takes its reciprocal, meaning one divided by that height. Cosecant uses the sine wave as its starting picture. You keep every horizontal input and change its vertical output. Where sine has height zero, the machine cannot produce an answer. Those missing inputs separate the finished graph into curved pieces called branches. The pieces bend away from the road, which represents the x-axis. The branch's turning point nearest the x-axis is its vertex.

Explain it like I am five

Picture buying gum with 1 dollar. At 50 cents a piece you get 2 pieces; at 25 cents, 4; at 10 cents, 10. Pieces = 1 ÷ price in dollars, so cheaper gum means more pieces, and a price of 0 has no answer. That 1 ÷ number is the number's reciprocal, and cosecant is the reciprocal of sine: csc x = 1sinx.

Start from the sine wave and keep every input x. Change each height h to 1 ÷ h: height 1 stays 1, 12 becomes 2, −12 becomes −2; the sign never changes. Where sine is 0, at x = nπ (0, π, 2π and so on), draw a dashed vertical asymptote, a line the graph approaches but never reaches, instead of a point.

One full turn: between 0 and π sine is a positive hump, so cosecant is a U opening upward with lowest point (π2, 1). Between π and 2π sine is a negative dip, so cosecant is an upside-down U with highest point (3π2, −1). No point lands strictly between −1 and 1.

2 Picture it

(π/2, 1)(3π/2, −1)rangeπ/2π3π/22π−4−224(π/2, 1)(3π/2, −1)rangeπ/2π3π/22π−4−224
y = csc x, solid, beside y = sin x, dashed, for y from −4 to 4.

Reminder

Reminder: Coordinates, Radians, Unit-circle sine, Reciprocals and fraction division, Negative division, Rationalizing a denominator, Zero denominator, Integer multiples, Intervals and union, Range, Odd symmetry, Period, Vertical asymptote
  • Coordinates. The first coordinate is input and the second is height: (π6, 2) means input π6, output 2.
  • Radians. Graph inputs are radians: π2 = 90° and 2π = 360°.
  • Unit-circle sine. Sine is the vertical coordinate on the unit circle: sin(π6) = 12.
  • Reciprocals and fraction division. Divide by a fraction by multiplying by its reciprocal: 1 ÷ 12 = 1 × 21 = 2.
  • Negative division. A positive divided by a negative is negative: 1 ÷ (−12) = −2.
  • Rationalizing a denominator. Multiply top and bottom by the same nonzero root: 22 = 222 = 2.
  • Zero denominator. A fraction cannot have zero in its denominator: sin π = 0 makes 1sinπ undefined.
  • Integer multiples. An integer n includes negative integers, zero and positive integers: x = nπ includes −π, 0 and π.
  • Intervals and union. Open parentheses exclude endpoints and ∪ joins pieces: (0, π) ∪ (π, 2π) excludes 0, π and 2π.
  • Range. Range names usable output heights: csc x ≥ 1 or csc x ≤ −1 includes 1 and −1 but excludes 0.
  • Odd symmetry. Odd symmetry changes both signs: (π6, 2) gives (−π6, −2).
  • Period. A period repeats outputs at shifted inputs: csc(x + 2π) = csc x wherever defined.
  • Vertical asymptote. Nearby outputs grow without bound at an asymptote: near x = 0, the small sine denominator makes cosecant's magnitude large.

3 Why

The reciprocal identity csc x = 1sinx changes only the output, so an input cannot move sideways. Sine lies between −1 and 1. A positive sine height becomes at least 1 after reciprocation, and a negative height becomes at most −1. Heights 1 and −1 keep their values. Near a sine zero, division by a tiny nonzero height produces outputs of growing magnitude. This makes the vertical asymptotes and the curved branches follow directly from the sine guide.

4 The rule

cscx=1sinx, with x≠nπ for every integer n.

Its vertical asymptotes are x=nπ, its range is (−∞,−1]∪[1,∞), its period is 2π, and csc(−x)=−cscx.

The same idea, five ways

Say it

Cosecant of x is one divided by sine of x.

Write it

A reciprocal graph keeps each input and replaces its nonzero output with one divided by that output.

In math
  • (x, y) becomes (x, 1y) when y ≠ 0
  • csc x = 1sinx
  • Domain: {x | x is real and x ≠ nπ, for every integer n}
  • Range: y ≤ −1 or y ≥ 1
  • Range: (−∞, −1] ∪ [1, ∞)
  • Graph words: two curved branches per 2π, opening away from the x-axis
Like

Like: a machine changes a sign's height but leaves its address alone.

See it
(π/2, 1)(3π/2, −1)rangeπ/2π3π/22π−4−224
The same picture again: y = csc x, solid, beside y = sin x, dashed, for y from −4 to 4.

The same idea, other ways

As a picture

Start with the dashed sine wave. Every zero becomes a vertical boundary. The top at 1 and bottom at −1 become the nearest points of cosecant to the x-axis. All other nonzero heights move farther from the axis.

(π/2, 1)(3π/2, −1)rangeπ/2π3π/22π−4−224
The same picture a third time: y = csc x, solid, beside y = sin x, dashed, for y from −4 to 4.
As a height-changing machine

Keep the input π6 on its road sign. Sine writes 12 on that sign. The reciprocal machine changes the height to 2 because 1 ÷ 12 = 2. The input is still π6.

sin(π/6) = 1/2take the reciprocalinputoutputcsc(π/6) = 2
Only the height changes; the angle remains π6 radians.
With shrinking heights

A sine height of 110 would produce a cosecant height of 10. A height of 1100 would produce 100. The closer a nonzero sine height gets to zero, the farther its reciprocal moves from the x-axis.

1÷110=10

1÷1100=100

sin x = 0: csc x is undefined

Why the nearest heights stay fixed

One divided by 1 is 1, and one divided by −1 is −1. These are the shared guide-wave points. No sine height has magnitude larger than 1, so no cosecant height can have magnitude smaller than 1.

11=1

1−1=−1

csc x ≥ 1 or csc x ≤ −1

Part 1: Reciprocal graph: keep x and replace the height

Think of the input as an address and the output as a measurement delivered there. Taking a reciprocal changes the measurement, not the address. At one address sine might deliver one half; cosecant delivers two at that same address. At another address sine might deliver negative one half; cosecant delivers negative two. An address where sine delivers zero cannot receive a cosecant measurement, because dividing one by zero is undefined.

  • Rule: a nonzero guide point (x, y) becomes (x, 1y).
  • Rule: guide height 0 produces an excluded input, not a point.
  • Rule: reciprocal heights keep their sign; heights ±1 stay fixed.
(π/2, 1)(3π/2, −1)rangeπ/2π3π/22π−4−224
The same picture, shown 4 times now: y = csc x, solid, beside y = sin x, dashed, for y from −4 to 4.
Reminder
Reminder: Reciprocal signs
  • Reciprocal signs. 1 ÷ 12 = 2, and 1 ÷ (−12) = −2; the sign stays the same.
The same idea, five ways
Say it

Keep the angle and take one divided by the height.

Write it

Each nonzero sine output is replaced by its reciprocal at the same input.

In math
  • (x, sin x) becomes (x, csc x)
  • csc x = 1sinx
  • sin x × csc x = 1 when sin x ≠ 0
Like

Like: changing the measurement delivered to an address while keeping the address.

See it
(π/2, 1)(3π/2, −1)rangeπ/2π3π/22π−4−224
The same picture, shown 5 times now: y = csc x, solid, beside y = sin x, dashed, for y from −4 to 4.

Worked example

A reciprocal point rather than a reflected point

You need the cosecant point at the same input as a known sine point. Convert (π6, 12) from the sine guide to cosecant.

Show the steps and the answer
(π/6, 2)π/2π−1123
y = csc x, solid, beside y = sin x, dashed, with the point (π/6, 2), for y from −1 to 3.
  1. Keep x=π6.A reciprocal graph changes the height and does not change the input.
  2. Calculate 1÷12=1×21=2.Dividing by a fraction multiplies by its reciprocal.
  3. Plot (π6,2).The cosecant point has the original input and the new height.
Answer
(π6,2).
Double-check Multiplication check: 12 × 2 = 1. A reflected height of −12 would instead give a product of −14, so it fails the reciprocal check.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Change the input π6 to 2 when taking a reciprocal.
The angle is an address, not the height being divided into 1.
✓ Instead: Keep the input π6 and change its sine height 12 to cosecant height 2.
Tips and tricks
  • Write the original input again before computing the new height.

Part 2: The positive cosecant branch on (0, π)

Picture a curved bowl above a road. Its lowest point is one unit above the road. The sides climb steeply as they approach two boundary lines. Sine is positive between zero and π, so cosecant stays positive throughout that interval. Sine reaches its highest value at the middle, where its reciprocal reaches the positive branch's lowest value. The middle point is called the vertex, meaning the turning point of this branch.

  • Rule: on 0 < x < π, csc x ≥ 1.
  • Rule: the vertex is (π2, 1), shared with sine.
  • Rule: the branch approaches x = 0 and x = π without reaching either line.
(π/6, 2)(π/2, 1)(5π/6, 2)π/2π1234
y = csc x, solid, beside y = sin x, dashed, for y from −0.25 to 4.
Reminder
Reminder: Reciprocal signs
  • Reciprocal signs. 1 ÷ 12 = 2, and 1 ÷ (−12) = −2; the sign stays the same.
The same idea, five ways
Say it

Between zero and pi, cosecant is one or greater.

Write it

The positive branch has its lowest point at pi over two.

In math
  • 0 < x < π
  • x ∈ (0, π)
  • csc x ≥ 1
  • Vertex: (π2, 1)
  • Graph words: upward-opening curved branch
Like

Like: a bowl above a road, with its bottom one unit above the road.

See it
(π/6, 2)(π/2, 1)(5π/6, 2)π/2π1234
The same picture again: y = csc x, solid, beside y = sin x, dashed, for y from −0.25 to 4.

Worked example

Three points on the positive branch

You need the middle and two supporting points for the positive piece. Sketch the cosecant branch on 0 < x < π.

Show the steps and the answer
(π/6, 2)(π/2, 1)(5π/6, 2)π/2π1234
The same picture a third time: y = csc x, solid, beside y = sin x, dashed, for y from −0.25 to 4.
  1. Draw boundary lines x=0 and x=π, after checking sin0=sinπ=0.These zeros would make the denominator zero, so they mark excluded inputs and asymptotes.
  2. Mark (π2,1).The unit-circle sine value is sin(π2) = 1, whose reciprocal is 1.
  3. Mark (π6,2) and (5π6,2).Both unit-circle sine values are 12, so both reciprocal heights are 2. In particular, 5π6 = π − π6, and vertical-axis reflection preserves sine.
  4. Draw a smooth upward-opening curve through these points, approaching each boundary line.Sine stays positive and approaches zero at both ends, so cosecant grows positive without bound there.
Answer
  • Interval: (0, π).
  • Vertex: (π2, 1).
  • Supporting points: (π6, 2) and (5π6, 2).
  • Shape: one upward-opening positive branch.
Double-check Independent range check: all three marked heights satisfy y ≥ 1. Multiplication check at 5π6: 12 × 2 = 1.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The positive cosecant branch has its lowest output 0.
That would require a sine reciprocal of 0, and no nonzero finite sine has that reciprocal.
✓ Instead: Its lowest output is 1 at π2; it stays in y ≥ 1.
Tips and tricks
  • The largest positive sine height gives the smallest positive cosecant height.

Part 3: The negative cosecant branch on (π, 2π)

Now picture an upside-down bowl below the road. Its highest point is one unit below the road. The sides fall as they approach the boundary lines. Sine is negative from π to two π, so cosecant is negative there too. The sine wave's bottom is negative one, which becomes negative one again after taking the reciprocal. This is the vertex of the negative branch. Its sides head downward, away from the x-axis, rather than upward through it.

  • Rule: on π < x < 2π, csc x ≤ −1.
  • Rule: the vertex is (3π2, −1), shared with sine.
  • Rule: the branch approaches x = π and x = 2π, opening downward away from the x-axis.
(7π/6, −2)(3π/2, −1)(11π/6, −2)π3π/22π−4−3−2−1
y = csc x, solid, beside y = sin x, dashed, for y from −4 to 0.25.
Reminder
Reminder: Reciprocal signs
  • Reciprocal signs. 1 ÷ 12 = 2, and 1 ÷ (−12) = −2; the sign stays the same.
The same idea, five ways
Say it

From pi to two pi, cosecant is negative one or less.

Write it

The negative branch has its highest point at three pi over two.

In math
  • π < x < 2π
  • x ∈ (π, 2π)
  • csc x ≤ −1
  • Vertex: (3π2, −1)
  • Graph words: downward-opening curved branch
Like

Like: an upside-down bowl hanging below a road.

See it
(7π/6, −2)(3π/2, −1)(11π/6, −2)π3π/22π−4−3−2−1
The same picture again: y = csc x, solid, beside y = sin x, dashed, for y from −4 to 0.25.

Worked example

Three points on the negative branch

You need the turning point and two supporting points for the negative piece. Sketch the cosecant branch on π < x < 2π.

Show the steps and the answer
(7π/6, −2)(3π/2, −1)(11π/6, −2)π3π/22π−4−3−2−1
The same picture a third time: y = csc x, solid, beside y = sin x, dashed, for y from −4 to 0.25.
  1. Draw boundary lines x=π and x=2π, checking sinπ=sin2π=0.This confirms that the two boundary inputs make the denominator zero and must be excluded.
  2. Mark (3π2,−1).Sine is −1 at that input, and 1−1 = −1.
  3. Mark (7π6,−2) and (11π6,−2).Both sine values are −12, so their reciprocal heights are −2. 7π6 = π + π6 reverses sine after a half-turn; 11π6 = −π6 + 2π keeps the reflected negative sine after a full turn.
  4. Draw the downward-opening curved branch through the three points.Its outputs remain negative and grow in magnitude near both zero-denominator boundaries.
Answer
  • Interval: (π, 2π).
  • Vertex: (3π2, −1).
  • Supporting points: (7π6, −2) and (11π6, −2).
  • Shape: one downward-opening negative branch.
Double-check Independent period and symmetry check: (π6, 2) gives (−π6, −2) by odd symmetry; adding 2π to that input gives (11π6, −2), the plotted right-side point.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: The negative cosecant branch opens upward through the x-axis.
A negative denominator gives a negative reciprocal of magnitude at least 1; crossing the axis would enter the forbidden band.
✓ Instead: It opens downward, with highest output −1 at 3π2.
Tips and tricks
  • On a negative branch, closest to the x-axis means highest, because −1 is above −2.

5 How

  1. Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.
  2. Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.
  3. Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.
  4. Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.
  5. Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.

Build cosecant from a sine guide

1
Is the sine height zero?
YesSet sin x = 0 to locate a forbidden denominator input, plug the input back into sine to verify zero, then draw an asymptote rather than a point.
NoKeep x and compute one divided by the sine height.
↓
2
Is the nonzero sine height positive?
YesPlace cosecant at height 1 or above and draw an upward-opening branch.
NoPlace cosecant at height −1 or below and draw a downward-opening branch.
↓
3
Is the sine height 1 or −1?
YesKeep that point unchanged as the branch's nearest point to the x-axis.
NoMove the point to its reciprocal height.
  1. Find sine's zeros to locate excluded inputs and asymptotes.
  2. Mark the shared points where sine is 1 or −1.
  3. Use one reciprocal point on each side of a shared point to guide the curve.
  4. Keep the sine sign, bend away from the x-axis, and repeat every 2π.

6 Worked example

Worked example

A complete cosecant period

You need the graph pieces across one full turn, including the locations where no point exists. Sketch y = csc x on 0 ≤ x ≤ 2π using sine as the guide.

Show the steps and the answer
(π/2, 1)(3π/2, −1)rangeπ/2π3π/22π−4−224
The same picture, shown 6 times now: y = csc x, solid, beside y = sin x, dashed, for y from −4 to 4.
input xoutput sin x00π/61/2π/215π/61/2π07π/6−1/23π/2−111π/6−1/22π0
Read each output directly below its input; the inputs are angles in radians and sin x is the output height.
input xoutput csc x0undefinedπ/62π/215π/62πundefined7π/6−23π/2−111π/6−22πundefined
Read each output directly below its input; the inputs are angles in radians and csc x is the output height.
  1. Draw the sine guide from x=0 to x=2π, using the sine fntable visual.The sine row gives the starting height under each angle, and the reciprocal construction keeps that angle fixed.
  2. Set sinx=0 to find denominator zeros: x=0,π,2π in this interval. Plug them back in: sin0=0,sinπ=0,sin2π=0.This finds the inputs that cannot be used in 1sinx, so each gets an asymptote and no cosecant point.
  3. Keep (π2,1) and (3π2,−1).The sine guide has height 1 and −1 there, and 11 = 1 while 1−1 = −1.
  4. Read the columns under π6 and 5π6 in the sine table. Replace their 12 heights by 1÷12=2.These two reciprocal points guide the positive branch on (0, π). Rebuild the farther input: 5π6 = π − π6, so reflection across the vertical axis keeps sine 12.
  5. Read the columns under 7π6 and 11π6. Replace their −12 heights by 1÷(−12)=−2.A positive numerator divided by a negative denominator gives a negative output, guiding the negative branch on (π, 2π). Here 7π6 = π + π6, so a half-turn reverses sine. Also 11π6 = 2π − π6, so reflecting to −π6 and adding a full turn gives the same negative sine.
  6. Draw an upward-opening curved branch through (π2,1), and a downward-opening curved branch through (3π2,−1), approaching their boundary lines.As sine approaches zero from the branch's sign, the reciprocal magnitude grows without bound. Neither branch enters −1 < y < 1.
Answer
  • Asymptotes in the interval: x = 0, π, 2π.
  • Positive branch: 0 < x < π, vertex (π2, 1).
  • Negative branch: π < x < 2π, vertex (3π2, −1).
  • Repeat the pattern every 2π.
Double-check Independent symmetry check: the point (π6, 2) turns about the origin into (−π6, −2). Adding the period 2π gives (11π6, −2), which matches the negative branch. Both vertices have magnitude 1, so the range check also agrees.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 4

A shared height stays put

You need the output at the positive sine peak. Evaluate csc(π2) and locate its point.

Show the steps and the answer
(π/2, 1)π/2π123
y = csc x, solid, beside y = sin x, dashed, with the point (π/2, 1), for y from −0.5 to 3.
  1. Use sin(π2)=1.The unit-circle point at 90° has vertical coordinate 1.
  2. Take the reciprocal: csc(π2)=11=1.Cosecant is one divided by sine.
  3. Plot (π2,1).The input stays π2 and the output is 1.
Answer
  • csc(π2) = 1.
  • Point: (π2, 1).
Double-check Multiplication check: sin(π2) × 1 = 1 × 1 = 1, so the two heights are reciprocals.

Rung 2 of 4

A positive fraction moves outward

You need the output at a sine height of one half. Evaluate csc(π6) and locate its point.

Show the steps and the answer
(π/6, 2)π/2π123
y = csc x, solid, beside y = sin x, dashed, with the point (π/6, 2), for y from −0.5 to 3.
  1. Use sin(π6)=12.The 30° unit-circle vertical coordinate is one half.
  2. Compute 1÷12=1×21=2.Dividing by a fraction means multiplying by its reciprocal.
  3. Plot (π6,2), above the vertex's height of 1.The positive reciprocal height stays positive and moves farther from the x-axis.
Answer
  • csc(π6) = 2.
  • Point: (π6, 2).
Double-check Multiplication check: 12 × 2 = 1. The height 2 also fits the positive range y ≥ 1.

Rung 3 of 4

A negative radical height

You need a negative cosecant output in exact form. Evaluate csc(7π4) and locate its point.

Show the steps and the answer
(7π/4, −√2)π3π/22π−3−2−1
y = csc x, solid, beside y = sin x, dashed, with the point (7π/4, −1.4142), for y from −3 to 0.5.
  1. Use sin(7π4)=−22.7π4 = −π4 + 2π. A full turn keeps the sine, and reflecting π4 across the horizontal axis gives sine −22.
  2. Write csc(7π4)=1÷(−22)=−22.Taking the reciprocal exchanges the numerator and denominator of the sine height and keeps its negative sign.
  3. Multiply numerator and denominator by 2: −222=−2.Since 2 × 2 = 2, this removes the root from the denominator without changing the fraction.
  4. Plot (7π4,−2).The input stays fixed and the output belongs on the negative branch.
Answer
  • csc(7π4) = −2.
  • Point: (7π4, −2).
Double-check Multiplication check: (−22) × (−2) = 22 = 1. The answer is below −1, as the negative branch requires.

Rung 4 of 4

Rebuild a full period across zero

You need both graph pieces across a full turn that includes negative inputs. Sketch y = csc x on −π ≤ x ≤ π and state the usable inputs within that interval.

Show the steps and the answer
(−π/2, −1)(π/2, 1)−π−π/2π/2π−4−224
y = csc x, solid, beside y = sin x, dashed, with the points (−π/2, −1) and (π/2, 1), for y from −4 to 4.
  1. Lightly sketch sine on the interval, then solve sinx=0 to locate forbidden inputs: −π, 0, π. Plug them back in: sin(−π)=sin0=sinπ=0.This identifies every zero denominator in the interval so those inputs can be excluded and used as asymptote locations.
  2. Keep (−π2,−1) and (π2,1) from the guide wave.Their sine heights are −1 and 1, whose reciprocals are unchanged.
  3. Add (−π6,−2) and (π6,2).The corresponding sine heights are −12 and 12, giving reciprocal heights −2 and 2.
  4. Draw a negative downward-opening branch on (−π,0) and a positive upward-opening branch on (0,π).Each branch keeps the sine sign and heads away from the x-axis as the sine denominator approaches zero.
  5. Write the usable inputs as (−π,0)∪(0,π).The three zero-denominator inputs are excluded, and the union joins the two remaining open intervals.
Answer
  • Asymptotes: x = −π, 0, π.
  • Vertices: (−π2, −1) and (π2, 1).
  • Usable inputs in the requested interval: (−π, 0) ∪ (0, π).
Double-check Independent odd-symmetry check: turning (π2, 1) and (π6, 2) about the origin gives both listed negative points. The interval length is 2π, so the two pieces form a full period.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample, wrong: sine height 12 becomes −12 on cosecant.
Why it fails: that is a reflection of the height. A reciprocal must multiply with the original nonzero height to make 1, but 12 × (−12) = −14.
✓ Instead: Right: sine height 12 becomes cosecant height 2 at the same input, because 12 × 2 = 1.
✗ Not this: Counterexample, wrong: draw a cosecant point (0, 0) where sine crosses the axis.
Why it fails: sin 0 = 0 would make csc 0 = 10, which is undefined. A zero denominator cannot become an output of zero.
✓ Instead: Right: draw the asymptote x = 0 and leave that input without a cosecant point.
✗ Not this: Counterexample: a U shaped cosecant branch may enter −1 < y < 1.
Cosecant is a reciprocal sine curve. Its reciprocal heights satisfy y ≥ 1 or y ≤ −1, including the vertices ±1.
✓ Instead: Right: draw curved branches approaching the asymptotes, with vertices at ±1 and all other points farther from the x-axis.

Tips and tricks

  • write 'keep x, take 1 ÷ height' beside the sine guide before changing any point.
  • sine's zeros give cosecant's asymptotes; sine's heights ±1 give cosecant's vertices.
  • 'same sign, farther from zero' describes every nonzero sine height with magnitude below 1.
  • one positive and one negative branch make the 2π period. Cosecant is odd, so opposite inputs give opposite heights.

7 The trap

taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.

Keep in mind

  • A reciprocal is not a reflection: height 12 becomes 2, not −12.
  • Heights smaller than 1 in size move away from the axis: 0.04 becomes 25 and −0.02 becomes −50.
  • The asymptotes of csc x sit at sine's zeros, x = nπ, and its turning points sit at sine's peaks and valleys, where csc x = 1 or −1.

Memory hook

Cosecant sits on sine: its U shapes rest on the tops and bottoms of the sine wave, and its walls stand where sine crosses zero.

Flash cards

Say the answer out loud, then flip.

What is a reciprocal?
1 divided by the number: the reciprocal of 0.5 is 2.
Where are the vertical asymptotes of csc x?
x = nπ, where sin x = 0.
What is the vertex of a cosecant branch?
Its turning point nearest the x-axis, at height 1 or −1.
sin x = 0.1. What is csc x?
10, because 1 ÷ 0.1 = 10.
sin x = −25. What is csc x?
−52=−2.5.
Where sine is 0, is the cosecant point (x, 0)?
No: 1 ÷ 0 is undefined, so there is no point. Draw an asymptote there.

Lesson 8 of 9

Secant: build a reciprocal graph from cosine

Subject: MathematicsLeans on: CoordinatesLeans on: RadiansLeans on: Unit-circle cosineLeans on: Reciprocal graphLeans on: Fraction divisionLeans on: Negative divisionLeans on: Rationalizing a denominatorLeans on: Zero denominatorLeans on: Integer multiplesLeans on: Intervals and unionLeans on: RangeLeans on: Even symmetryLeans on: PeriodLeans on: Vertical asymptoteOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Think of the same height-changing machine with a different starting drawing. This time you feed it cosine heights. It leaves each horizontal position alone and replaces the height with one divided by that height. At the center, cosine has height one, so secant also has height one. Half a turn farther along, cosine has height negative one, so secant has height negative one. Zero heights still cannot pass through the machine. The finished picture has a curved positive branch centered at zero and a curved negative branch centered at π. The pattern repeats after a full turn.

Explain it like I am five

Picture laying tracing paper over the cosine wave and redrawing it with one rule: keep each input x and replace each height h with 1 ÷ h, its reciprocal. The new drawing is secant, sec x = 1cosx.

Walk along it. At x = 0 cosine is 1, so secant is 1: the bottom of an upward U. As x moves toward π2 (about 1.57), cosine shrinks through 0.5, 0.1 and 0.01, and secant grows through 2, 10 and 100. At x = π2 cosine is 0, so secant has no value: draw a dashed vertical asymptote there. Past it cosine is negative, so secant is negative; at x = π cosine is −1, so secant is −1, the top of an upside-down U.

Asymptotes stand wherever cos x = 0, at x = π2 + nπ. The branches never enter the band between −1 and 1, the pattern repeats every 2π, and the graph matches its mirror image across the y-axis because secant is even.

2 Picture it

(0, 1)(π, −1)range−π/2π/2π3π/2−4−224(0, 1)(π, −1)range−π/2π/2π3π/2−4−224
y = sec x, solid, beside y = cos x, dashed, for x from −1.8708 to 5.0124.

Reminder

Reminder: Coordinates, Radians, Unit-circle cosine, Reciprocal graph, Fraction division, Negative division, Rationalizing a denominator, Zero denominator, Integer multiples, Intervals and union, Range, Even symmetry, Period, Vertical asymptote
  • Coordinates. A point lists input then height: (π, −1) means input π and output −1.
  • Radians. Graph inputs use radians: π = 180° and 3π2 = 270°.
  • Unit-circle cosine. Cosine is the unit-circle horizontal coordinate: cos(π3) = 12.
  • Reciprocal graph. Keep the input and take one divided by a nonzero height: (π3, 12) becomes (π3, 2).
  • Fraction division. Dividing by a fraction multiplies by its reciprocal: 1 ÷ 12 = 1 × 21 = 2.
  • Negative division. One divided by a negative stays negative: 1 ÷ (−12) = −2.
  • Rationalizing a denominator. Multiply top and bottom by the same root: 22 = 222 = 2.
  • Zero denominator. Exclude an input that makes the bottom zero: cos(π2) = 0 makes sec(π2) undefined.
  • Integer multiples. In π2 + nπ, n may be any integer: n = −1 gives −π2, and n = 1 gives 3π2.
  • Intervals and union. Parentheses exclude boundaries, and ∪ joins permitted pieces: (−π2, π2) excludes both asymptote inputs.
  • Range. The reciprocal range includes its edge heights: y ≤ −1 or y ≥ 1 allows −1 and 1 but excludes 12.
  • Even symmetry. An even function keeps its height at opposite inputs: sec(−π3) = sec(π3) = 2.
  • Period. A 2π period repeats a height: sec(−π + 2π) = sec π = −1.
  • Vertical asymptote. A shrinking nonzero denominator produces unbounded nearby heights: cosine approaching zero makes secant's magnitude grow.

3 Why

Secant comes from sec x = 1cosx. Cosine is zero at x = π2 + nπ, so those inputs make the denominator zero and create the asymptotes. Its heights stay between −1 and 1, giving reciprocal heights at or beyond ±1. Cosine is even, so opposite inputs have equal cosine values and equal reciprocals. Cosine repeats every 2π, and its reciprocal repeats with it. A shift by π changes the sign instead of repeating a nonzero height.

4 The rule

secx=1cosx, with x≠π2+nπ for every integer n.

Its vertical asymptotes are x=π2+nπ, its range is (−∞,−1]∪[1,∞), its period is 2π, and sec(−x)=secx.

The same idea, five ways

Say it

Secant of x is one divided by cosine of x.

Write it

A secant graph takes reciprocal cosine heights at unchanged inputs.

In math
  • sec x = 1cosx
  • Domain: {x | x is real and x ≠ π2 + nπ, for every integer n}
  • Range: y ≤ −1 or y ≥ 1
  • Range: (−∞, −1] ∪ [1, ∞)
  • sec(x + 2π) = sec x
  • sec(−x) = sec x
  • Graph words: reciprocal cosine branches with symmetry about the y-axis
Like

Like: using a different set of height measurements in the same reciprocal machine.

See it
(0, 1)(π, −1)range−π/2π/2π3π/2−4−224
The same picture again: y = sec x, solid, beside y = cos x, dashed, for x from −1.8708 to 5.0124.

The same idea, other ways

As a cosine-guided picture

The cosine wave begins at (0, 1), so secant's positive vertex begins there too. The zeros at −π2 and π2 frame that branch. Cosine's bottom at (π, −1) locates the next negative vertex.

(0, 1)(π, −1)range−π/2π/2π3π/2−4−224
The same picture a third time: y = sec x, solid, beside y = cos x, dashed, for x from −1.8708 to 5.0124.
With a changed measurement

Cosine height 12 becomes secant height 2 because 12 × 2 = 1. Cosine height −12 becomes −2 because (−12) × (−2) = 1. Neither input nor sign changes.

cos x = 12 → sec x = 2

cos x = −12 → sec x = −2

As a mirror check

Cosine gives the same height at x and −x. Taking the reciprocal of equal heights gives equal answers. Thus the secant points (π3, 2) and (−π3, 2) match across the y-axis.

(−π/3, 2)(0, 1)(π/3, 2)−π/2π/21234
y = sec x, solid, beside y = cos x, dashed, for x from −1.6708 to 1.6708.

Part 1: The positive secant branch centered at 0

Picture a bowl directly above the origin. Its lowest point sits at height one, and the two sides match across the y-axis. This comes from the cosine wave, whose highest point is at input zero. As you walk left or right from zero toward the nearest cosine zeros, the positive cosine height shrinks. Its reciprocal therefore rises. The boundary inputs are negative π over two and positive π over two, and neither is part of secant's branch.

  • Rule: on −π2 < x < π2, sec x ≥ 1.
  • Rule: the vertex is (0, 1), shared with cosine.
  • Rule: x = −π2 and x = π2 are the bounding asymptotes; opposite inputs have equal heights.
(−π/3, 2)(0, 1)(π/3, 2)−π/2π/21234
The same picture again: y = sec x, solid, beside y = cos x, dashed, for x from −1.6708 to 1.6708.
Reminder
Reminder: Reciprocal signs
  • Reciprocal signs. 1 ÷ 12 = 2, and 1 ÷ (−12) = −2; the sign stays the same.
The same idea, five ways
Say it

Between negative pi over two and pi over two, secant is one or greater.

Write it

The positive branch has its lowest point at input zero and is symmetric about the y-axis.

In math
  • −π2<x<π2
  • x∈(−π2,π2)
  • sec x ≥ 1
  • Vertex: (0, 1)
  • sec(−x) = sec x
  • Graph words: upward-opening curved branch centered at 0
Like

Like: a bowl centered above the origin, with its bottom one unit above the road.

See it
(−π/3, 2)(0, 1)(π/3, 2)−π/2π/21234
The same picture a third time: y = sec x, solid, beside y = cos x, dashed, for x from −1.6708 to 1.6708.

Worked example

Three points on secant's central branch

You need the central turning point and a matching point on each side. Sketch the secant branch on −π2 < x < π2.

Show the steps and the answer
(−π/3, 2)(0, 1)(π/3, 2)−π/2π/21234
The same picture, shown 4 times now: y = sec x, solid, beside y = cos x, dashed, for x from −1.6708 to 1.6708.
  1. Draw the two boundary lines and check cos(−π2)=cos(π2)=0.These two zero-denominator inputs are excluded and locate the asymptotes.
  2. Mark (0, 1).The guide height is cos 0 = 1, whose reciprocal is 1.
  3. Mark (π3,2).Cosine at 60° is 12, and 1 ÷ 12 = 2.
  4. Mark (−π3,2) and connect both sides through (0, 1), bending upward toward the boundary lines.Secant is even, so the opposite input has the same height; both sides grow as the positive cosine denominator shrinks.
Answer
  • Interval: (−π2, π2).
  • Vertex: (0, 1).
  • Supporting points: (−π3, 2) and (π3, 2).
  • Shape: one upward-opening positive branch.
Double-check Independent unit-circle check: the point at −60° has horizontal coordinate 12, giving sec(−π3) = 2 directly. That agrees with the point found using even symmetry.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Put the positive secant vertex at (π2, 1).
Cosine is zero there, so secant is undefined at that input.
✓ Instead: The central positive vertex is (0, 1), where cosine equals 1.
Tips and tricks
  • Start at the cosine peak (0, 1), then build matching reciprocal points on both sides.

Part 2: The negative secant branch centered at π

Picture an upside-down bowl whose middle sits below the input π. Its highest point has height negative one. The cosine guide is negative between π over two and three π over two, so all the reciprocal heights there are negative too. At π the guide reaches negative one, which keeps its value after reciprocation. To either side, cosine moves toward zero while staying negative. Secant then moves downward, farther from the x-axis, approaching the two boundary lines.

  • Rule: on π2 < x < 3π2, sec x ≤ −1.
  • Rule: the vertex is (π, −1), shared with cosine.
  • Rule: x = π2 and x = 3π2 are the bounding asymptotes, and the branch opens downward.
(2π/3, −2)(π, −1)(4π/3, −2)π/2π3π/2−4−3−2−1
y = sec x, solid, beside y = cos x, dashed, for x from 1.4708 to 4.8124.
Reminder
Reminder: Reciprocal signs
  • Reciprocal signs. 1 ÷ 12 = 2, and 1 ÷ (−12) = −2; the sign stays the same.
The same idea, five ways
Say it

Between pi over two and three pi over two, secant is negative one or less.

Write it

The negative branch has its highest point at input pi.

In math
  • π2<x<3π2
  • x∈(π2,3π2)
  • sec x ≤ −1
  • Vertex: (π, −1)
  • Graph words: downward-opening curved branch centered at π
Like

Like: an upside-down bowl hanging below the input pi.

See it
(2π/3, −2)(π, −1)(4π/3, −2)π/2π3π/2−4−3−2−1
The same picture again: y = sec x, solid, beside y = cos x, dashed, for x from 1.4708 to 4.8124.

Worked example

Three points on secant's negative branch

You need the turning point and two supporting points for the negative piece. Sketch the secant branch on π2 < x < 3π2.

Show the steps and the answer
(2π/3, −2)(π, −1)(4π/3, −2)π/2π3π/2−4−3−2−1
The same picture a third time: y = sec x, solid, beside y = cos x, dashed, for x from 1.4708 to 4.8124.
  1. Draw the two boundary lines and verify cos(π2)=cos(3π2)=0.This confirms the denominator zeros that separate the negative branch from neighboring branches.
  2. Mark (π,−1).Cos π = −1, and 1−1 = −1.
  3. Mark (2π3,−2) and (4π3,−2).At 120° and 240° the unit-circle horizontal coordinates are −12, whose reciprocal is −2. Rebuild them from π3: 2π3 = π − π3 reverses the horizontal coordinate; 4π3 = −2π3 + 2π keeps that negative cosine.
  4. Connect the points with a downward-opening curve approaching both boundary lines.Cosine stays negative and approaches zero at both ends, so secant becomes negative with unbounded magnitude.
Answer
  • Interval: (π2, 3π2).
  • Vertex: (π, −1).
  • Supporting points: (2π3, −2) and (4π3, −2).
  • Shape: one downward-opening negative branch.
Double-check Independent symmetry and period check: reflecting (2π3, −2) across the y-axis gives (−2π3, −2). Adding 2π to that input gives (4π3, −2), which matches the other supporting point.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Secant's negative branch can reach −12.
That height would require cosine −2, beyond a unit-circle coordinate.
✓ Instead: The branch stays at or below −1, with its highest point (π, −1).
Tips and tricks
  • Check negative supporting points by multiplying their height by the cosine guide height.

5 How

  1. Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.
  2. Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.
  3. Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.
  4. Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.
  5. Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.

Build secant from a cosine guide

1
Is the cosine height zero?
YesSet cos x = 0 to find the forbidden input, plug it back into cosine to verify zero, then draw a vertical asymptote rather than a secant point.
NoKeep the input and take one divided by the cosine height.
↓
2
Is cosine positive on this interval?
YesDraw a positive upward-opening branch with heights y ≥ 1.
NoDraw a negative downward-opening branch with heights y ≤ −1.
↓
3
Is the point reflected to the opposite input?
YesKeep its secant height unchanged, because secant is even.
NoUse the reciprocal cosine height at the original input.
  1. Identify cosine zeros, because they are forbidden secant inputs.
  2. Mark cosine's heights 1 and −1 as the secant vertices.
  3. Take reciprocal heights at one or two additional inputs on each branch.
  4. Connect the points with curves facing away from the x-axis and copy the pattern by 2π.

6 Worked example

Worked example

A full cosine-guided secant period

You need one complete positive branch and one complete negative branch. Sketch y = sec x on −π2 ≤ x ≤ 3π2 using cosine as the guide.

Show the steps and the answer
(0, 1)(π, −1)range−π/2π/2π3π/2−4−224
The same picture, shown 4 times now: y = sec x, solid, beside y = cos x, dashed, for x from −1.8708 to 5.0124.
input xoutput cos x−π/20−π/31/201π/31/2π/202π/3−1/2π−14π/3−1/23π/20
Read the cos x height under its input angle; all inputs in this picture are radians.
input xoutput sec x−π/2undefined−π/3201π/32π/2undefined2π/3−2π−14π/3−23π/2undefined
Read the sec x height under its input angle; all inputs in this picture are radians.
  1. Draw the cosine guide using the cosine fntable visual.The starting heights appear directly below the angle inputs.
  2. Set cosx=0 to locate forbidden inputs: −π2,π2,3π2. Plug them back in: cos(−π2)=cos(π2)=cos(3π2)=0.These values make the secant denominator zero, so each is excluded and receives an asymptote.
  3. Keep (0, 1) and (π,−1).Cosine has heights 1 and −1 there, and their reciprocals have the same values.
  4. Read the columns under −π3 and π3. Change each cosine height 12 to secant height 2.The positive branch lies between −π2 and π2, and these points guide its two sides.
  5. Read the columns under 2π3 and 4π3. Change each cosine height −12 to secant height −2.The negative branch lies between π2 and 3π2, and both support points remain negative. 2π3 = π − π3, so vertical-axis reflection reverses cosine. 4π3 = −2π3 + 2π; reflection across the horizontal axis and a full turn both keep that cosine.
  6. Draw an upward-opening curved branch centered at 0 and a downward-opening curved branch centered at π.Near either boundary the cosine height approaches zero with the branch's sign, so the reciprocal moves away from the x-axis without bound.
Answer
  • Asymptotes in the interval: x = −π2, π2, 3π2.
  • Positive branch: −π2 < x < π2, vertex (0, 1).
  • Negative branch: π2 < x < 3π2, vertex (π, −1).
  • The interval length and the repeating pattern are 2π.
Double-check Independent symmetry check: reflecting (π3, 2) across the y-axis gives (−π3, 2), the plotted positive point. Reflecting (π, −1) gives (−π, −1); adding the period 2π returns to (π, −1). The heights also satisfy the two allowed range bands.

Ladder: from easy to exam-hard

Try each rung before you open its steps.

Rung 1 of 3

Secant at the origin's input

You need the secant height at input zero. Evaluate sec 0 and locate its point.

Show the steps and the answer
(0, 1)−π/2π/2123
y = sec x, solid, beside y = cos x, dashed, for x from −π/2 to π/2.
  1. Use cos0=1.The unit-circle point at 0° is (1, 0), and cosine is its horizontal coordinate.
  2. Compute sec0=11=1.Secant is the reciprocal of cosine.
  3. Plot (0, 1).The unchanged input is zero and the new output is 1.
Answer
  • sec 0 = 1.
  • Point: (0, 1).
Double-check Multiplication check: cos 0 × sec 0 = 1 × 1 = 1. This point also lies on the y-axis, so even symmetry leaves it in place.

Rung 2 of 3

The negative branch at and beside its vertex

You need the negative branch's central height and one neighboring height. Evaluate sec π and sec(2π3).

Show the steps and the answer
(π, −1)(2π/3, −2)π/2π3π/2−3−2−1
y = sec x, solid, beside y = cos x, dashed, for x from π/2 to 3π/2.
  1. Use cosπ=−1 and cos(2π3)=−12.The unit-circle horizontal coordinates at 180° and 120° give these exact cosine values.
  2. Compute secπ=1−1=−1.The reciprocal of −1 is −1, locating the negative vertex.
  3. Compute sec(2π3)=1÷(−12)=−2.Dividing one by a negative half gives a negative output of magnitude 2.
  4. Plot (π,−1) and (2π3,−2) below the x-axis.Both inputs lie in the cosine-negative interval (π2, 3π2), so their secant heights are negative.
Answer
  • sec π = −1.
  • sec(2π3) = −2.
Double-check Multiplication checks: (−1) × (−1) = 1 and (−12) × (−2) = 1. The second point is farther below the axis than the vertex, as required.

Rung 3 of 3

A full period with a negative-input branch

You need two complete secant branches including the one centered at negative pi. Sketch y = sec x on −3π2 ≤ x ≤ π2 and state the usable inputs within this interval.

Show the steps and the answer
(−π, −1)(0, 1)−3π/2−π−π/2π/2−4−224
y = sec x, solid, beside y = cos x, dashed, for x from −4.9624 to 1.8208.
  1. Lightly sketch cosine, then solve cosx=0 to locate the forbidden inputs −3π2,−π2,π2. Plug them back into cosine and verify that all three values are zero.This finds the zero-denominator inputs so they can be excluded and marked as asymptotes.
  2. Keep the guide-wave points (−π,−1) and (0, 1).Cosine has heights −1 and 1 there, so the reciprocal heights remain −1 and 1.
  3. Add (−2π3,−2) on the negative branch and (−π3,2) on the positive branch.The guide heights are −12 and 12, and their reciprocals are −2 and 2.
  4. Draw a downward-opening branch centered at −π and an upward-opening branch centered at 0, each approaching its bounding asymptotes.The branches keep cosine's signs and stay outside the band −1 < y < 1.
  5. Write the usable inputs as (−3π2,−π2)∪(−π2,π2).Open endpoints remove the three denominator zeros while keeping all remaining inputs in the interval.
Answer
  • Asymptotes: x = −3π2, −π2, π2.
  • Vertices: (−π, −1) and (0, 1).
  • Usable inputs: (−3π2, −π2) ∪ (−π2, π2).
Double-check Independent repetition check: adding 2π to (−π, −1) gives (π, −1), the previously drawn negative vertex. Even symmetry also matches (−π3, 2) with (π3, 2). The requested interval has length 2π.

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample, wrong: put secant's asymptotes at x = 0 and x = π because those are sine zeros.
Why it fails: secant divides by cosine. Cos 0 = 1 and cos π = −1, so both denominators are nonzero and both inputs are allowed.
✓ Instead: Right: x = 0 and x = π give vertices with heights 1 and −1. Secant's asymptotes are at x = π2 + nπ.
✗ Not this: Counterexample, wrong: reflect (π3, 2) to (−π3, −2) for secant.
Why it fails: that changes both signs and would use odd symmetry. Secant is even because cosine at opposite inputs is equal.
✓ Instead: Right: reflection across the y-axis gives (−π3, 2), with the same height.
✗ Not this: Counterexample: repeat a positive secant branch after π with its height unchanged.
sec 0 = 1 but sec π = −1, so π changes the sign. The same-height pattern returns after 2π.
✓ Instead: Right: use a full 2π period containing one positive branch and one negative branch, each bending away from the x-axis toward its boundary lines.

Tips and tricks

  • 'sec pairs with cos' identifies the guide wave and the denominator to check.
  • the first secant vertex is (0, 1); the next is (π, −1). These two points distinguish secant from cosecant.
  • opposite secant inputs have the same height. Use this y-axis symmetry to check the central branch.
  • touching the guide at ±1 does not make the whole curves equal. All smaller nonzero guide magnitudes produce reciprocal magnitudes greater than 1.
  • mark all cosine zeros before drawing any branch, then keep every branch outside −1 < y < 1.

7 The trap

secant uses cosine zeros, which lie at odd multiples of π2. Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.

Keep in mind

  • Secant's asymptotes come from cosine's zeros, π2 + nπ, not sine's: x = 0 is a vertex of secant, not an asymptote.
  • Secant is even, so its graph is its own mirror image across the y-axis: sec(−1.2) = sec 1.2 ≈ 2.76.
  • Secant and cosecant have the same U shapes, shifted: secant's first upward vertex is at x = 0, cosecant's at x = π2.

Memory hook

Secant sits on cosine: its U shapes rest on cosine's peaks and valleys, and its walls stand where cosine crosses zero, at π2 + nπ.

Flash cards

Say the answer out loud, then flip.

Which wave is the guide for sec x, and why?
cos x, because sec x = 1cosx.
Where are secant's vertical asymptotes?
x = π2 + nπ, where cos x = 0.
cos x = 0.4. What is sec x?
2.5, because 1 ÷ 0.4 = 2.5.
cos x = −58. What is sec x?
−85=−1.6.
Is sec x even or odd, and what does that do to its graph?
Even: the graph matches its mirror image across the y-axis.
True or false: secant's asymptotes are at x = nπ, like cosecant's.
False: secant divides by cosine, which is 0 at π2 + nπ. At nπ, cosine is 1 or −1.

Lesson 9 of 9

Read, sketch and remember all four graphs

Subject: MathematicsLeans on: Denominator checkLeans on: Interval endpointsLeans on: Fractions of πLeans on: Exact circle valuesLeans on: PeriodLeans on: RangeLeans on: SymmetryOpen this lesson
Leans on 0Comes back in 0

1 In plain words

Picture a route map with landmarks and gaps. Before drawing a route, you mark where it cannot go. Then you add a few known points and connect each allowed piece with its correct shape. The same plan works for all four graphs. Your denominator locates the gaps, your exact values locate the landmarks, and your period tells you how to copy the pattern. The summary below gathers facts you can now explain. Some facts deserve quick recall, but long lists of angles and points can be rebuilt from the circle. Practice rebuilding them instead of trying to memorize every row.

Explain it like I am five

Picture building a fence: set the posts, hang a panel between each pair, then repeat the section down the line. Sketching tan, cot, sec or csc works the same way.

Posts: write the function as a fraction and find where its bottom is 0; each such input gets a dashed vertical asymptote. Panels: plot a few known points and draw the right shape between posts, rising for tan, falling for cot, U shapes for sec and csc. Repeat: copy by the period, π for tan and cot, 2π for sec and csc.

Example: the posts of sec x = 1cosx from 0 to 3π. Cosine is 0 at π2 + nπ, for any integer n. Try n = 0, 1, 2: π2, 3π2, 5π2. The next, 7π2, is past 3π, which equals 6π2. At the ends cosine is 1 and −1, not 0, so no post there. Three posts.

Nothing here needs memorizing as a list: the bottom of each fraction gives the posts, and the circle gives the points.

2 Picture it

−2π−ππ2π−4−224−2π−ππ2π−4−224
y = tan x.

Reminder

Reminder: Denominator check, Interval endpoints, Fractions of π, Exact circle values, Period, Range, Symmetry
  • Denominator check. sec(π2) fails because cos(π2) = 0.
  • Interval endpoints. [−2π, 2π] includes ±2π; (−2π, 2π) would not.
  • Fractions of π. π2+π=3π2.
  • Exact circle values. At π the point is (−1, 0), so sec π = −1.
  • Period. tan(x + π) = tan x; csc(x + π) changes sign.
  • Range. A reciprocal height 12 is impossible because −1 < 12 < 1.
  • Symmetry. An odd pair is (x, y) and (−x, −y); secant instead keeps the height.

3 Why

A denominator zero identifies a missing angle input, while nearby signs explain the branch's direction. Exact values anchor the curve so a rough sketch has the right height. The range prevents reciprocal branches from entering the middle strip. Period checks horizontal repetition, and symmetry checks opposite sides of the drawing. These checks use different information, so agreement among them helps catch errors. No single sample point can verify the whole graph, but the combined structure makes a reliable parent-function sketch.

4 The rule

for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote.

Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.

The same idea, five ways

Say it

Say build the graph, then check it from several directions.

Write it

Each parent graph must agree with its formula, domain, range, period and symmetry.

In math
  • cosine-bottom family: tan, sec
  • sine-bottom family: cot, csc
  • odd: tan, cot, csc
  • even: sec
  • graph words: mark breaks, anchor branches, repeat and check
Like

A route map needs correct gaps, landmarks and repeated sections.

See it
−2π−ππ2π−4−224
y = sec x.

The same idea, other ways

As a list of forbidden inputs

Read a function's column in the picture. The cosine-bottom pair shares one family, and the sine-bottom pair shares the other. Here n is any integer.

input functionoutput excluded xtan xπ/2 + nπcot xnπsec xπ/2 + nπcsc xnπ
The shared denominator explains the repeated entries.
As a list of heights

The quotient functions reach all real heights. The reciprocal functions stay outside the open strip between −1 and 1.

input functionoutput rangetan x(−∞, ∞)cot x(−∞, ∞)sec x(−∞, −1] ∪ [1, ∞)csc x(−∞, −1] ∪ [1, ∞)
Match each range to the kind of fraction that defines the function.
As repeating pieces

Quotients copy after one branch of width π. Reciprocal functions need two opposite-sign branches, totaling 2π.

input functionoutput fundamental periodtan xπcot xπsec x2πcsc x2π
The repeat distances come from the half-turn sign argument.
As opposite-side checks

Secant has equal heights at opposite inputs; the other three have opposite heights.

input functionoutput symmetrytan xodd: origincot xodd: originsec xeven: y−axiscsc xodd: origin
Even and odd describe the paired points on the graph.
FunctionUndefined inputs and vertical asymptotesRangeFundamental periodEven or odd
tan xx=π2+nπ(−∞,∞)πodd
cot xx = nπ(−∞,∞)πodd
sec xx=π2+nπ(−∞,−1]∪[1,∞)2πeven
csc xx = nπ(−∞,−1]∪[1,∞)2πodd

Part 1: Know cold, with memory devices

These few facts should come to mind quickly because they start every problem. Keep the denominator check, the quotient and reciprocal pairs, and the two period sizes ready. Use each short memory device with a worked case so the phrase points to a reason instead of replacing it.

  • Know cold: check the bottom. Bottom 0 means undefined; top 0 over a nonzero bottom means output 0.
  • Know cold: tan and sec have a cosine bottom; cot and csc have a sine bottom. Memory device: pair by the bottom.
  • Know cold: quotients cancel two sign changes, so their fundamental period is π; reciprocals carry one sign change and need 2π.
  • Know cold: even means equal heights; odd means opposite input and opposite output. Sec is even; tan, cot and csc are odd.

Check the bottom

Pair by the bottom

Quotients: π; reciprocals: 2π

Even: equal heights; odd: opposite heights

The same idea, five ways
Say it

Say the cue, then show why it works. The arrow ⇒ means if the statement on its left holds, then the statement on its right follows.

Write it

The short cues help you start a calculation without memorizing a long angle list.

In math
  • bottom = 0 ⇒ undefined
  • top = 0 and bottom ≠ 0 ⇒ output 0
  • Ptan = Pcot = π
  • Psec = Pcsc = 2π
Like

A route's few main landmarks are easier to remember than every street address.

See it

cos bottom: tan and sec

sin bottom: cot and csc

Worked example

Use check the bottom

In plain words, apply the same memory cue to two different denominators. Decide whether cot(π2) and sec(π2) have outputs.

Show the steps and the answer
x = cos θy = sin θ(0, 1)
Check each function's bottom even when the angle is the same.
  1. cot(π2)=01=0.Its sine bottom is nonzero.
  2. sec(π2) would be 10, so it is undefined.Its cosine bottom is zero.
Answer
  • cot(π2) = 0.
  • sec(π2) is undefined.
Double-check The shared circle point (0, 1) supplies both denominators and confirms why the outcomes differ.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: check the bottom means any zero makes the function undefined.
The cue distinguishes the position of the zero.
✓ Instead: 01 has output zero; 10 has no output.
Tips and tricks
  • Practice saying the cue and naming its denominator in the same sentence.

Part 2: Understand, then rebuild it when needed

You can rebuild long lists of axis angles, exact values and graph points from a few circle positions. Do not spend memory on a list that takes a few steps to recover. Start with the formula, find the denominator zeros, then use the circle's coordinates for the points between them. Rebuilding also gives you a check when you doubt a remembered answer.

  • Rebuild forbidden angle lists from cos x = 0 or sin x = 0 and integer multiples of π.
  • Rebuild exact heights from circle coordinates, then divide or take a reciprocal.
  • Rebuild asymptote behavior from the denominator's sign near zero and the nonzero numerator.
  • Rebuild full graphs by copying a period and checking the symmetry; the U-shaped branches come from reciprocal heights.
1−1−2π−ππ2π−4−224
y = csc x, solid, beside y = sin x, dashed.
The same idea, five ways
Say it

Say start with the formula and rebuild the picture.

Write it

The graph follows from its denominator, a few exact heights and repetition.

In math
  • tanx=sinxcosx
  • cot x = cosxsinx
  • sec x = 1cosx
  • csc x = 1sinx
Like

Use a map's main roads to recover the smaller turns.

See it
−2π−ππ2π−4−224
y = cot x.

Worked example

Rebuilding y = csc x from its downward branch on (−π, 0)

Graph the branch of y = csc x that passes through the point (−π2, −1). Then extend the graph using the period and the odd symmetry of cosecant, and state the range. The three-column table gives exact values on this branch: csc(−5π6) = −2, csc(−π2) = −1 and csc(−π6) = −2. The table lists each input as a count of sixths of π, so −5, −3 and −1 stand for −5π6, −π2 and −π6.

Show the steps and the answer
input x (sixths of π)output csc x−5−2−3−1−1−2↓ evaluate: input given, read the output below it
Values of y = csc x on the branch between the asymptotes x = −π and x = 0.
  1. Write the reciprocal formula: y=cscx=1sinx.Cosecant is defined as the reciprocal of sine, so sin x is the denominator. Any input that makes sin x equal 0 cannot be used.
  2. Set the denominator equal to 0. sinx=0 when x=kπ for an integer k. The multiples of π on either side of −π2 are x=−π and x=0. Substitute to verify: sin(−π)=0 and sin(0)=0. Test just inside the branch: csc(−0.01)=1sin(−0.01)≈1−0.0099998≈−100.0. Similarly, sin(−π+0.01)=−sin(0.01), so csc(−π+0.01)≈−100.0. Draw dashed vertical asymptotes at x=−π and x=0.Both inputs make the denominator 0, so they are excluded from the domain. Right beside them sin x is a tiny negative number, so its reciprocal is a huge negative number. An excluded input whose nearby outputs are unbounded gives a vertical asymptote. No multiple of π lies strictly between −π and 0, so this branch has no other asymptote.
  3. Convert the table inputs: −5,−3 and −1 sixths of π are −5π6,−π2 and −π6. Confirm each output with the formula. sin(−5π6)=−12, so csc(−5π6)=−2. sin(−π2)=−1, so csc(−π2)=−1. sin(−π6)=−12, so csc(−π6)=−2. Plot (−5π6,−2),(−π2,−1) and (−π6,−2).Each plotted point must satisfy y = 1sinx and stay in the allowed outputs y ≤ −1 or y ≥ 1. All three outputs are at most −1. All three inputs lie strictly between −π and 0, so they belong to the same branch.
  4. Draw a downward-opening U between the asymptotes. Start far below the x-axis just right of x=−π. Rise through (−5π6,−2) to the highest point (−π2,−1). Then fall through (−π6,−2) and drop toward −∞ as x approaches 0 from the left. The branch is symmetric about x=−π2: the inputs −5π6 and −π6 are each π3 from it and share the output −2.On (−π, 0), sin x is negative. It equals −1 at x = −π2 and rises toward 0 at both ends. Its reciprocal is therefore at most −1 and reaches −1 only at x = −π2. Its size grows without bound as sin x shrinks toward 0.
  5. Repeat by the fundamental period 2π. Adding 2π to each key point gives (7π6,−2),(3π2,−1) and (11π6,−2), on a copy between x=π and x=2π. Subtracting 2π gives a copy between x=−3π and x=−2π with top (−5π2,−1). Next, check the odd symmetry: csc(−x)=1sin(−x)=1−sinx=−cscx, so each point (a, b) pairs with (−a,−b). Reflecting the key points through the origin gives (5π6,2),(π2,1) and (π6,2). These form an upward U on (0,π) with lowest point (π2,1), which also repeats every 2π. Range: (−∞,−1]∪[1,∞).Sine has period 2π, so csc(x + 2π) = 1sin(x+2π) = 1sinx = csc x, and shifted points stay on the graph. Sine is odd, so its reciprocal is odd and the graph is symmetric about the origin. Because |sin x| ≤ 1, every output has |csc x| ≥ 1, so no point lies strictly between y = −1 and y = 1.
Answer
The vertical asymptotes x = −π and x = 0 bound the branch. It is a downward-opening U with highest point (−π2, −1). It passes through (−5π6, −2) and (−π6, −2) and falls toward −∞ beside both asymptotes. By odd symmetry, the next branch is an upward U on (0, π) with lowest point (π2, 1), passing through (π6, 2) and (5π6, 2). Repeating every 2π gives the whole graph: asymptotes x = kπ (k any integer), tops (−π2 + 2kπ, −1), bottoms (π2 + 2kπ, 1), and range (−∞, −1] ∪ [1, ∞).
Double-check Test an input that is not in the table. x = −π4 lies between −π2 and −π6, so the sketch puts its output between −1 and −2. The formula gives sin(−π4) = −22, so csc(−π4) = −22 = −2 ≈ −1.41, which is between −2 and −1. Period: sin(3π2) = −1, so csc(3π2) = −1, matching the shifted top (3π2, −1). Symmetry: sin(π6) = 12, so csc(π6) = 2, the opposite of csc(−π6) = −2. Asymptote: csc(−0.01) ≈ −100.0, so the branch does plunge beside x = 0.

Work to write

  1. y = csc x = 1sinx
  2. sin x = 0 ⇒ x = kπ; sin(−π) = 0 and sin(0) = 0
  3. vertical asymptotes x = −π and x = 0 (csc(−0.01) ≈ −100)
  4. points (−5π6, −2), (−π2, −1), (−π6, −2), all with y ≤ −1
  5. downward U on (−π, 0), highest point (−π2, −1), y → −∞ at both asymptotes
  6. period 2π: copy on (π, 2π) through (7π6, −2), (3π2, −1), (11π6, −2)
  7. odd: csc(−x) = −csc x ⇒ upward U on (0, π), lowest point (π2, 1)
  8. range (−∞, −1] ∪ [1, ∞)
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: memorizing sec π = 1 from a picture is enough.
A picture can be misread, and cosine at π is −1.
✓ Instead: Rebuild sec π = 1 ÷ (−1) = −1.
Tips and tricks
  • Do not memorize every point. Keep the circle and the four formulas ready to rebuild them.

Part 3: Put on the cheat sheet: printable summary

This compact card is the information to look up while studying or to put on an allowed cheat sheet. The longer derivations above tell you why each entry is true. On a closed-book exam you can recreate the card from the denominator pairs, the circle and the period argument. Here n always means any integer, including negative integers and zero.

  • tan: sinxcosx. Exclude π2 + nπ. Range (−∞, ∞). Fundamental period π. Odd; each branch rises.
  • cot: cosxsinx. Exclude nπ. Range (−∞, ∞). Fundamental period π. Odd; each branch falls.
  • sec: 1cosx. Exclude π2 + nπ. Range (−∞, −1] ∪ [1, ∞). Fundamental period 2π. Even; reciprocal of cosine.
  • csc: 1sinx. Exclude nπ. Range (−∞, −1] ∪ [1, ∞). Fundamental period 2π. Odd; reciprocal of sine.

tan: cos bottom; P = π; odd

cot: sin bottom; P = π; odd

sec: cos bottom; P = 2π; even

csc: sin bottom; P = 2π; odd

The same idea, five ways
Say it

Say use the card for a quick structure check.

Write it

The summary gathers the four parent graphs in one place.

In math
  • cosine zeros: π2 + nπ
  • sine zeros: nπ
  • quotient range: (−∞, ∞)
  • reciprocal range: (−∞, −1] ∪ [1, ∞)
Like

A small map key helps you read a larger map.

See it
input pairoutput denominator zerostan and secπ/2 + nπcot and cscnπ
The key organizes the four functions into two families.

Worked example

Check a reciprocal sketch using the card

A sketch labeled csc x has a branch passing through (π, 0). Is that possible? In plain words, check one claimed point against both domain and range.

Show the steps and the answer
rangeπ/2π3π/22π−4−224
y = csc x.
  1. Input π is excluded because sinπ=0.Setting the denominator equal to zero locates a forbidden input, and substitution verifies it.
  2. Output 0 is outside the range of cosecant.Every valid cosecant output is at least 1 or at most −1.
  3. Replace the claimed point with the asymptote x=π and keep each neighboring branch away from the x-axis.The graph approaches that input with unbounded outputs; it never has an output there.
Answer
  • The point (π, 0) is impossible.
  • Draw the vertical asymptote x = π instead.
Double-check Two independent checks fail: the proposed input is forbidden and the proposed output is in the missing range band.
Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: a U-shaped secant branch can dip to y = 12.
The summary's reciprocal range rejects that height.
✓ Instead: The positive branch has its lowest height at 1.
Tips and tricks
  • A summary card is a check, not a substitute for the denominator and reciprocal explanations.

5 How

  1. Write the quotient or reciprocal formula.
  2. Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.
  3. Plot the known key points within each allowed branch.
  4. Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.
  5. Repeat by the fundamental period and check the even or odd symmetry and the range.

Sketch a parent graph and audit the result

1
Is this a secant or cosecant graph?
YesUse the corresponding cosine or sine guide; keep reciprocal branches outside the middle band.
NoUse three ratio anchors and the rising tangent or falling cotangent shape.
↓
2
Would a drawn line cross an asymptote?
YesStop it and start a separate branch on the other side.
NoCheck period and symmetry.
  1. Write its defining formula and find the forbidden denominator-zero inputs.
  2. Substitute into the denominator to confirm every marked asymptote.
  3. Place the known key points and use the correct branch shape.
  4. Repeat by its fundamental period.
  5. Check its range and its even or odd point pairs.

6 Worked example

Worked example

Secant: the upward branch through (2π, 1) and its neighbor

Graph the branch of y = sec x that passes through the point (2π, 1), then sketch the neighboring downward branch through (3π, −1). Extend the graph using the period and the even symmetry of secant, and state the range. The three-column table gives exact values on the first branch: sec(7π4) = 2, sec(2π) = 1 and sec(9π4) = 2. The table lists each input as a multiple of π, so 1.75, 2 and 2.25 stand for 7π4, 2π and 9π4, and it shows 2 rounded to 1.414.

Show the steps and the answer
input x (multiple of π)output sec x1.751.414212.251.414↓ evaluate: input given, read the output below it
Three-column table of y = sec x on the branch through (2π, 1).
  1. Write secant as a reciprocal formula: y=secx=1cosx.Secant is the reciprocal of cosine, so each output is 1 divided by cos x. The formula has a value only where its denominator cos x is not 0.
  2. Set the denominator equal to 0: cosx=0 gives x=π2+kπ for any integer k. The two zeros on either side of 2π are x=3π2 and x=5π2. Substitute them back: cos(3π2)=0, and cos(5π2)=cos(π2+2π)=cos(π2)=0.A denominator-zero input is excluded. Just beside it cos x is close to 0, so 1cosx grows without bound, which makes each such vertical line a vertical asymptote. Consecutive zeros are π apart, so no other asymptote lies between 3π2 and 5π2, and these two lines bound the branch through (2π, 1).
  3. Find the allowed outputs of this branch. For 3π2<x<5π2, the angle x−2π is between −π2 and π2, so 0<cosx≤1. Therefore secx=1cosx≥1, and secx=1 only where cosx=1, which is at x=2π.The reciprocal of a positive number no greater than 1 is at least 1. So every point of this branch must lie on or above the line y = 1, and the branch opens upward.
  4. Verify and plot the table points. cos(2π)=1 gives sec(2π)=1. cos(7π4)=22 gives sec(7π4)=22=2≈1.414. cos(9π4)=cos(π4+2π)=22 gives sec(9π4)=2. Plot (2π,1),(7π4,2) and (9π4,2), at x≈6.28, 5.50 and 7.07.Each plotted point must agree with sec x = 1cosx and with the allowed outputs y ≥ 1. The two 2 points sit π4 either side of 2π at the same height, so the branch is symmetric about the line x = 2π.
  5. Draw the upward U. Start high beside x=3π2, fall through (7π4,2) to the lowest point (2π,1), rise through (9π4,2), and climb beside x=5π2 without ever touching either asymptote.From x = 3π2 to x = 2π, cos x increases from 0 to 1, so its reciprocal falls from unbounded values down to 1. From x = 2π to x = 5π2, cos x decreases from 1 toward 0, so sec x increases without bound. Near both asymptotes cos x approaches 0 through positive values, so the outputs head to +∞.
  6. Sketch the neighboring branch. The next zero of cos x is x=7π2, since cos(7π2)=cos(3π2+2π)=0. For 5π2<x<7π2,−1≤cosx<0. cos3π=cos(π+2π)=−1 gives sec3π=−1. cos(11π4)=cos(13π4)=−22 gives sec(11π4)=sec(13π4)=−2. Draw a downward U between x=5π2 and x=7π2 through (11π4,−2), the highest point (3π,−1), and (13π4,−2).The reciprocal of a negative number between −1 and 0 is at most −1, so this branch lies on or below y = −1. Near its asymptotes cos x approaches 0 through negative values, so the outputs fall without bound.
  7. Repeat by the fundamental period 2π. The window from x=3π2 to x=7π2 holds one upward and one downward branch, and copies of it shifted by 2π,4π, … in both directions give the whole graph. For example, shifting the first branch left by 2π gives the upward branch between x=−π2 and x=π2 through (−π4,2), (0, 1) and (π4,2). For integers k, the asymptotes are x=π2+kπ, the lowest points of the upward branches are (2kπ,1), and the highest points of the downward branches are ((2k+1)π,−1).cos(x + 2π) = cos x, so sec(x + 2π) = sec x and every point (x, y) repeats at (x + 2π, y). The period is 2π and not π because sec(x + π) = −sec x, so a shift of π carries an upward branch onto a downward one.
  8. Check the even symmetry. sec(−x)=1cos(−x)=1cosx=secx, so the graph is symmetric about the y-axis. The mirror image of (7π4,2) is (−7π4,2), and cos(−7π4)=22 gives sec(−7π4)=2. The period gives the same value: −7π4=9π4−4π, and sec(9π4)=2.Even symmetry pairs each point (x, y) with (−x, y). The paired point agrees with both the formula and the period, so the extended graph is consistent. The copy through (0, 1) is its own mirror image.
  9. State the range. Wherever sec x is defined, either 0<cosx≤1, giving secx≥1 (the upward branches), or −1≤cosx<0, giving secx≤−1 (the downward branches). The range is (−∞,−1]∪[1,∞).cos x always lies between −1 and 1, so no output of sec x lies strictly between −1 and 1. The values 1 and −1 are reached at x = 2π and x = 3π, and the branches climb or fall without bound near the asymptotes.
Answer
The branch through (2π, 1) is an upward U between the vertical asymptotes x = 3π2 and x = 5π2. Its lowest point is (2π, 1), and it passes through (7π4, 2) and (9π4, 2). Beside it is a downward U between x = 5π2 and x = 7π2 with highest point (3π, −1). The graph repeats every 2π, has vertical asymptotes x = π2 + kπ for every integer k, and is symmetric about the y-axis because sec(−x) = sec x. The range is (−∞, −1] ∪ [1, ∞).
Double-check Test an input that is not in the table. x = 11π6 lies between 7π4 and 2π, and cos(11π6) = 32, so sec(11π6) = 23 = 233 ≈ 1.155. This lies between 1 and 2 ≈ 1.414, as the falling left half of the U requires. Just right of the asymptote, x = 3π2 + 0.01 gives cos x = sin 0.01 ≈ 0.0100 and sec x ≈ 100, a very large positive output. The pair (7π4, 2) and (−7π4, 2) agrees with both the even symmetry and the period 2π. Every plotted output (1, 2, −1 and −2) satisfies y ≥ 1 or y ≤ −1.

Work to write

  1. sec x = 1cosx
  2. cos x = 0 gives x = π2 + kπ; check: cos(3π2) = 0 and cos(5π2) = 0
  3. Vertical asymptotes of the branch: x = 3π2 and x = 5π2
  4. sec(2π) = 1, sec(7π4) = 22 = 2, sec(9π4) = 2
  5. Upward U with lowest point (2π, 1); sec x ≥ 1 on this branch
  6. Downward U between x = 5π2 and x = 7π2 with highest point (3π, −1)
  7. Period 2π: sec(x + 2π) = sec x; asymptotes x = π2 + kπ
  8. Even: sec(−x) = sec x, so sec(−7π4) = 2
  9. Range: (−∞, −1] ∪ [1, ∞)

Counterexamples

What it is not, and the tempting wrong moves.

✗ Not this: Counterexample: tangent's zeros x = nπ are its asymptotes.
At those inputs, cosine is ±1 and the quotient is defined with output zero.
✓ Instead: Its asymptotes are the shifted family x = π2 + nπ.
✗ Not this: Counterexample: join a negative reciprocal branch to a positive one through y = 0.
You would cross a forbidden input and enter the missing range band.
✓ Instead: Keep the branches separate, each facing away from the x-axis.

Tips and tricks

  • Before sketching, mark forbidden inputs. Before accepting the sketch, check its heights and repeat distance.
  • In the summary, n is any integer; +nπ includes every angle in the notation ±nπ because negative integers supply the minus cases.

7 The trap

Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.

Keep in mind

  • On a one-page handwritten cheat sheet, the summary table (asymptotes, range, period, even or odd) and a thumbnail of each graph cover this section, and the rest rebuilds from the four fractions.
  • Test the endpoints of a closed interval too: on [0, 3π], cot x has posts at both ends, since sine is 0 at 0 and at 3π.
  • Tangent's zeros, x = nπ, are not its posts; its posts sit halfway between, at π2 + nπ.
  • Check a finished sketch three ways: sec and csc never enter −1 < y < 1, the pattern repeats at the right period, and only sec is symmetric about the y-axis.

Memory hook

Posts, panels, repeat: bottom zeros are posts, key points and shape make panels, the period repeats them. Tan climbs, cot slides, sec and csc cup.

Flash cards

Say the answer out loud, then flip.

What is a branch?
One unbroken piece of the graph between two neighboring asymptotes.
Which two functions share the asymptotes x = nπ?
cot x and csc x: both divide by sin x.
Which of the four graphs is symmetric about the y-axis?
sec x, the only even one.
List the asymptotes of csc x on [π, 3π].
x = π, 2π and 3π. The endpoints count, since sine is 0 there.
List the asymptotes of tan x on [4π, 6π].
x = 9π2 and x = 11π2.
True or false: tangent's asymptotes sit at its zeros.
False: its zeros are at nπ, and its asymptotes are at π2 + nπ.