Quarry School

Trigonometry: cheat sheet

Angles and their measure

  • s = rθ and A = 12r2θ, with "θ in radians" written next to them.

    s is the arc length, the curved crust of a pizza slice, and A is the area of the slice itself, the sector. Both formulas need θ in radians because a radian angle counts radius-lengths of arc: an angle of θ radians sweeps θ radius-lengths of crust, so s = rθ. For the area, the whole pie is πr2 for a full turn of 2π, and the slice is the fraction θ2π of it: θ2π × πr2 = 12r2θ. Degrees do not count radius-lengths, so degrees put into these formulas give nonsense.

  • 1° = 60′ and 1′ = 60″. Borrowing: 90° = 89°59′60″ and 180° = 179°59′60″.

    Degrees split into smaller units the way an hour does: 1° = 60 minutes (60′) and 1′ = 60 seconds (60″), so 1° = 3600″. To subtract an angle in degrees, minutes and seconds from 90° or 180°, every column needs something to subtract from, so you borrow, the way you break a dollar into coins before paying 37 cents: 90° = 89° + 60′ = 89°59′ + 60″ = 89°59′60″. It is still exactly 90°, written so each column can be subtracted. The same move gives 180° = 179°59′60″.

  • π2≈1.57,π≈3.14,3π2≈4.71,2π≈6.28.

    These four decimals are the quarter-turn borders written as plain numbers. π ≈ 3.14159, so π2 ≈ 1.57, π ≈ 3.14, 3π2 ≈ 4.71 and 2π ≈ 6.28, each rounded to two decimals. A radian angle written without π, like 2.5 or −4, is a plain number, and these landmarks tell you where it ends without a calculator, the way mile markers tell you which stretch of highway you are on. They belong on the cheat sheet because every question of the form “which quadrant is this angle in?” uses them.

Trigonometric functions

  • The two special triangles with their side lengths.

    Two triangles hold every special-angle value. The 45°-45°-90° triangle is half of a square cut along its diagonal: legs 1 and 1, hypotenuse 2. The 30°-60°-90° triangle is half of an equilateral triangle with sides 2: short leg 1 across from 30°, long leg 3 across from 60°, hypotenuse 2. Check both with the Pythagorean theorem: 12 + 12 = 2 = (2)2, and 12 + (3)2 = 4 = 22. Any triangle with these angles is a scaled copy, like a photo enlargement: multiply all three sides by the same number.

  • The full table for 30°, 45°, 60° (all six functions).

    The copy on your sheet saves time on the test, like a multiplication table taped inside a notebook, but copy it with understanding. The rows are 30°, 45°, 60°; the columns are sin, cos, tan, then their flips csc, sec, cot, each rationalized. Patterns catch copying mistakes: down the rows, sine grows through 12, 22, 32 while cosine shrinks through the same values; 30° and 60° trade sine and cosine because they are the two acute angles of one triangle; and at 45° sine equals cosine, tangent equals cotangent, and secant equals cosecant.

  • tan θ and sec θ are undefined where x = 0 (on the y-axis); cot θ and csc θ are undefined where y = 0 (on the x-axis).

    Four of the functions are fractions with x or y on the bottom, and a fraction breaks when its bottom is 0, like a vending machine with an empty slot: you press the button and nothing comes out. tan θ = yx and sec θ = rx break where x = 0, on the y-axis: 90°, 270° and every angle 90° + n·180°, that is, π2 + nπ. cot θ = xy and csc θ = ry break where y = 0, on the x-axis: every n·180°, that is, nπ. Sine and cosine divide only by r, which is never 0, so they never break.

  • "Degree sign means DEG mode. No sign means RAD mode."

    A calculator cannot see the degree sign on your paper; it uses whatever mode it is set to, like a kitchen scale that must be told grams or ounces. The convention: an angle in degrees always shows the ° sign, and an angle in radians shows no unit. So sin 25° needs DEG mode, while sin 25, or any angle written with π, needs RAD mode. Test the mode before a problem: sin 30 should read 0.5 in DEG mode. There are no sec, csc or cot keys; use 1 ÷ cos, 1 ÷ sin and 1 ÷ tan.

Properties of the trigonometric functions

  • The domain and range table for all six functions.

    The domain is every input a function accepts; the range is every output it can give, like the buttons that work on a vending machine and the snacks that can come out. Sine and cosine accept every real number and give outputs in [−1, 1]. Tangent and secant reject t = π2 + nπ, where x = 0; cotangent and cosecant reject t = nπ, where y = 0. Tangent and cotangent can output any real number. Secant and cosecant, the flips of numbers between −1 and 1, output only (−∞, −1] ∪ [1, ∞).

  • The even and odd list.

    Even: cosine and secant, f(−t) = f(t), so the minus sign disappears. Odd: sine, cosecant, tangent and cotangent, f(−t) = −f(t), so the minus sign comes out front. The reason fits on one line: P(−t) = (x, −y), the mirror image of P(t) across the x-axis. A function built from x alone (cos t = x, sec t = 1x) cannot notice the flip, so it is even; a function with one y in it (sin, csc, tan, cot) changes sign, so it is odd. Even graphs mirror across the y-axis like a face; odd graphs match themselves after a half turn about the origin, like a pinwheel.

  • The four-step method, written out.

    Copy the method as four numbered lines, so under test pressure you follow a checklist instead of improvising, like a pilot's preflight list. 1. Minus sign inside? cos and sec drop it; sin, csc, tan and cot move it out front. 2. Too big? Subtract 2π (360°) for sin, cos, sec and csc, or π (180°) for tan and cot, until the angle is less than one period. 3. Find the quadrant; it gives the sign. 4. Finish with a known value, special or quadrantal. For a sign-only question, stop after step 3.

Graphs of sine and cosine

  • T = 2π|ω| and ω = 2πT.

  • Start positions: middle going up is sin, top is cos, middle going down is −sin, bottom is −cos.

  • Cofunctions: sin x = cos(π2 − x), tan x = cot(π2 − x), sec x = csc(π2 − x).

Graphs of the other four functions

  • The summary table: asymptotes, range, period, even or odd.

  • A small sketch of each of the four graphs.

Sinusoidal functions

  • amplitude = |A|, period = 2πω, phase shift = φω, midline y = B.

  • |A| = 12(max − min) and B = 12(max + min).

  • Range: B − |A| to B + |A|.

Inverse trigonometric functions

  • Domain and range: arcsin takes [−1, 1] and gives [−π2, π2]; arccos takes [−1, 1] and gives [0, π]; arctan takes (−∞, ∞) and gives (−π2, π2), with horizontal asymptotes y = −π2 and y = π2.

  • Negative inputs: arcsin(−x) = −arcsin x; arctan(−x) = −arctan x; arccos(−x) = π − arccos x.

  • Backward values, sine: arcsin 0 = 0, arcsin 12 = π6, arcsin 22 = π4, arcsin 32 = π3, arcsin 1 = π2.

  • Backward values, cosine: arccos 1 = 0, arccos 32 = π6, arccos 22 = π4, arccos 12 = π3, arccos 0 = π2, arccos(−1) = π.

  • Backward values, tangent: arctan 0 = 0, arctan 33 = π6, arctan 1 = π4, arctan 3 = π3.

  • Radians and degrees: π6 = 30°, π4 = 45°, π3 = 60°, π2 = 90°, π = 180°.

  • Undoing: sin(arcsin x) = x and cos(arccos x) = x for −1 ≤ x ≤ 1; arcsin(sin x) = x only for −π2 ≤ x ≤ π2; arccos(cos x) = x only for 0 ≤ x ≤ π; otherwise answer with the angle in the range that has the same value.

  • Triangle: sin θ = opphyp, cos θ = adjhyp, tan θ = oppadj, adj2 + opp2 = hyp2; a leg pointing left or down is negative; cos(arcsin x) = 1−x2 for −1 ≤ x ≤ 1.

  • Every answer on [0, 2π): α = the key pressed on the number without its minus sign; try α, π − α, π + α and 2π − α (in degrees α, 180° − α, 180° + α, 360° − α); keep the ones in quadrants with the right sign: sine positive in I and II, cosine positive in I and IV, tangent positive in I and III; for 0, and for 1 or −1 with sine or cosine, keep instead each different one in [0, 2π) that solves the equation.

  • How many on [0, 2π): sin t = k or cos t = k has two answers when −1 < k < 1, one when k = 1 or k = −1, none when k > 1 or k < −1; tan t = k has two for every k.

  • Calculator: set degrees or radians before pressing sin⁻¹, cos⁻¹ or tan⁻¹ (check: sin⁻¹ 0.5 shows 30 in degrees, about 0.5236 in radians); the screen shows only the principal value.

Trigonometric equations

  • Reference angles for sine: 12 gives π6, 22 gives π4, 32 gives π3.

  • Reference angles for cosine: 12 gives π3, 22 gives π4, 32 gives π6.

  • Reference angles for tangent: 33 gives π6, 1 gives π4, 3 gives π3.

  • Placing the reference angle α on one turn: α in I, π − α in II, π + α in III, 2π − α in IV.

  • Answers on the axes, on one turn: sin t = 0 at 0 and π; sin t = 1 at π2; sin t = −1 at 3π2; cos t = 0 at π2 and 3π2; cos t = 1 at 0; cos t = −1 at π; tan t = 0 at 0 and π.

  • General solution of sin t = c, cos t = c or tan t = c, k any integer: t = a + 2kπ for each answer a on one turn for sine or cosine; t = a + kπ for tangent, with a the answer in [0, π). With nt inside, write nt = a + 2kπ (a + kπ for tangent) first, then divide every term by n.

  • Multiple angle, for sin(nt) = c, cos(nt) = c or tan(nt) = c: find every u = nt with 0 ≤ u < 2nπ, then divide each by n.

  • Calculator, in radian mode: α = arcsin c, arccos c or arctan c. Second answer: π − α for sine, 2π − α for cosine, α + π for tangent. Add 2π to a negative answer. Round at the end, to four decimal places, and write ≈.

  • Identity swaps, from sin2 t + cos2 t = 1: cos2 t = 1 − sin2 t and sin2 t = 1 − cos2 t. From tan t = sintcost: a·sin t = b·cos t, with a ≠ 0, becomes tan t = ba once π2 and 3π2 are checked.

  • Checks: for sine and cosine, cross out any value above 1 or below −1. After squaring, put every candidate back into the original equation.

Trigonometric identities

  • Reciprocal identities: csc t = 1sint, sec t = 1cost, cot t = 1tant.

  • Quotient identities: tan t = sintcost, cot t = costsint.

  • Undefined: tan t and sec t where cos t = 0, at t = π2 + kπ (90° + k · 180°); csc t and cot t where sin t = 0, at t = kπ (k · 180°); k is any integer.

  • Pythagorean identities: sin2t + cos2t = 1; 1 + tan2t = sec2t; 1 + cot2t = csc2t.

  • The same, rearranged: sin2t = 1 − cos2t; cos2t = 1 − sin2t; tan2t = sec2t − 1; cot2t = csc2t − 1; sec2t − tan2t = 1; csc2t − cot2t = 1.

  • Negative angles: cos(−t) = cos t and sec(−t) = sec t (even); sin(−t) = −sin t, tan(−t) = −tan t, csc(−t) = −csc t, cot(−t) = −cot t (odd).

  • Simplify: rewrite in sine and cosine; put fractions over one bottom; trade sin2t + cos2t for 1; factor; cancel only a factor that multiplies the whole top and the whole bottom.

  • Conjugates: (1 − sin t)(1 + sin t) = 1 − sin2t = cos2t; (1 − cos t)(1 + cos t) = 1 − cos2t = sin2t.

  • Prove: start with the more complicated side; change only that side; name the identity at each step; stop when it reads exactly as the other side. Do not start from the claim and work both sides, square both sides, or divide by an expression that can be 0.

  • Check or disprove: try one angle where both sides are defined. Different values prove it is not an identity; equal values prove nothing.

Sum and difference formulas

  • The special-angle table: the sine, cosine and tangent of 0°, 30°, 45°, 60° and 90°, the pieces every split is built from.

  • Exact values to check your work against: sin 15° = cos 75° = 6−24 ≈ 0.2588 and cos 15° = sin 75° = 6+24 ≈ 0.9659, the decimals rounded; tan 15° = 2 − 3 and tan 75° = 2 + 3.

  • tan(a + b) = tana+tanb1−tanatanb and tan(a − b) = tana−tanb1+tanatanb: the top keeps the sign inside, the bottom flips it. Both need tan a and tan b to exist, and when the bottom is 0 the result is undefined. Look these up rather than memorize them.

  • The other value of the same angle, from sin2θ + cos2θ = 1: cos θ = ±1−sin2θ and sin θ = ±1−cos2θ, with the sign picked by the quadrant.

Double-angle and half-angle formulas

  • sin 2t = 2 sin t cos t

  • cos2t=cos2t−sin2t=2cos2t−1=1−2sin2t

  • tan 2t = 2tant1−tan2t, when tan t exists and tan t ≠ 1, tan t ≠ −1

  • sin2 t = 1−cos2t2; cos2 t = 1+cos2t2; tan2 t = 1−cos2t1+cos2t when cos 2t ≠ −1

  • sint2=±1−cost2;cost2=±1+cost2

  • tan t2 = ±1−cost1+cost = sint1+cost = 1−costsint, each where its bottom is not 0; the two fractions carry their own sign

  • Which sign for ±: the sign of that function in the quadrant of t2, not of t; find that quadrant by halving both ends of the range of t

  • Signs by quadrant (All Students Take Calculus): I all three positive, II sine, III tangent, IV cosine

  • Equations: rewrite so only t appears, move every term to one side, factor, set each factor equal to 0; never divide by sin t or cos t

  • Check values: sin 22.5° = 2−22 ≈ 0.383; cos 105° = −2−32 ≈ −0.259 (decimals rounded)