Coterminal angles: keep the landing, change the journey — quick review
Think of a runner on a circular track.
An integer n counts complete laps and may be positive, negative, or zero. 360°n means 360° × n.
In degrees, all angles coterminal with θ have measures θ + 360°n, where n is any integer. For a one-turn representative use 0° ≤ θ < 360°: an angle that ends on the initial ray, such as 360° or −720°, has one-turn representative 0°.
Keep the initial side fixed. A shared terminal ray alone is not enough if the starting rays differ.
If the measurement is negative, add 360° until it is at least 0°.
If it is 360° or more, subtract 360° until it is less than 360°.
For two positive and two negative answers, continue adding or subtracting full turns until you have two distinct answers of each sign.
Check each answer by subtracting the original measure. The difference must be an integer multiple of 360°.
An angle of 1185° is in standard position: vertex at the origin, initial side along the positive x-axis. (a) Find the angle θ with 0° ≤ θ < 360° that is coterminal with 1185°. (b) Find two positive angles and two negative angles, other than 1185° itself, that are coterminal with 1185°, and check each one.
(a) θ = 105°, since 1185° = 105° + 360° × 3. (b) Positive: 105° and 465°. Negative: -255° and -615°. Other choices are also correct, such as 825° or -975°, because any 1185° + 360°n with n a nonzero integer is coterminal with 1185°.
Subtracting 180° to make an angle smaller. A half turn points in the opposite direction. Use a whole 360° turn when you must keep the same terminal side.
Keep the initial side fixed and write one turn as 360°.
For a one-turn representative, add 360° while the angle is negative and subtract 360° while it is at least 360°.
For several positive or negative coterminals, continue adding or subtracting full turns until every requested sign has the required number of distinct answers.
Check both the requested interval or signs and the full-turn differences.
Line
A straight path that continues forever in both directions. Two points on it can name it.
Ray
A straight path that begins at one endpoint and continues forever in one direction.
Angle
Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.
Vertex
The endpoint shared by an angle's two rays. It is the middle letter in a three-letter angle name.
Initial side
The ray where an angle's rotation begins.
Terminal side
The ray where an angle's rotation ends.
Rotation
A turn around a fixed point. Its amount can be smaller than, equal to, or larger than a full revolution.
Clockwise
Turning in the direction a clock's hands normally move.
Counterclockwise
Turning in the direction opposite to a clock's usual hand movement.
Positive angle
An angle whose recorded rotation goes counterclockwise. Its sign describes direction, not which quadrant contains its terminal side.
Negative angle
An angle whose recorded rotation goes clockwise. Its sign describes direction, not whether its terminal side points left or right.
Full revolution
One complete turn that brings a rotating ray back to its starting position. Its size is 360° or 2π radians.
Standard position
An angle placement with vertex at the origin and initial side along the positive x-axis.
Origin
The point (0, 0), where the x-axis and y-axis meet.
x-axis
The horizontal coordinate line. Points on it have y = 0.
y-axis
The vertical coordinate line. Points on it have x = 0.
Positive x-axis
The part of the horizontal axis pointing right from the origin.
Quadrant
One of the four open regions between the coordinate axes. The axes themselves belong to no quadrant.
Coterminal angles
Angles with the same initial and terminal sides whose measures differ by an integer number of full revolutions.
Right angle
An angle of 90°, which is one quarter of a full revolution.
Circle
All the points in a flat surface that are the same distance from one center point.
Center
The point inside a circle equally distant from every point on the circle.
Integer
A whole-number count, positive or negative, or zero. It has no fractional part.