Transformation of functions — quick review
Vertical shifts: move every height by the same amount
Picture a graph drawn on a clear sheet laid over a map.
g(x) = f(x) + k sends (u, v) to (u, v + k). Positive k moves up; negative k moves down. The domain stays the same; every range value gains k.
1. Find the number added outside f. Include its sign, because −4 is a shift of k = −4.
2. Keep every horizontal coordinate, because the input sent into f has not changed.
3. Add k to every height, because g outputs the old height plus k.
4. Move several recognizable points and connect them with the original shape.
5. Substitute a point into the new formula to check its new height.
Find the new height at x = 8 for g(x) = + 2.
This asks for the new output at the stated input after the outside height change.
The old point (8, 2) becomes (8, 4).
Changing x when the added number is outside. For f(x) + 3, finish finding the old height first and then add 3; the left-to-right address stays put.
1. Find the added number after f finishes. Write it as k, including a minus sign.
2. Translate the request: you need the old height at the same input, followed by the outside addition.
3. For each old point (u, v), leave u alone and calculate v + k.
4. Move the whole familiar shape through the new points. Add k to its old range values; keep its domain.
5. Check by substituting u into g, or subtract k from the new height to recover v.
Transformation
A change to a Function that moves, flips, stretches, or compresses its Graph.
Function
A rule that gives exactly one Output for every accepted Input.
Input
The value you give a Function before its rule runs, usually labeled x.
Output
The result returned by a Function, written f(x) or y.
Graph
A picture of a Function's accepted Input and Output pairs, plotted as points (x, f(x)).
Vertical shift
Adding a Constant to every Output, moving the entire Graph up or down without changing its shape.
Outside change
A change applied after the Function returns its Output; it changes vertical coordinates.
Domain
All Inputs a Function accepts without an invalid calculation.
Range
All Outputs a Function can actually produce from its accepted Inputs.
Vertex
The turning point of a quadratic U, or the corner where an absolute value V changes direction.
Endpoint
A boundary point where a graph or interval starts or stops.
Absolute value function
The Function f(x) = |x|, returning the distance from x to 0. Its Graph is a V.
Cube root function
The toolkit Function f(x) = , returning the number whose cube is x. Negative Inputs are allowed.
Axis
One of the two reference number lines on a graph. The x-axis is horizontal; the y-axis is vertical. Together they are called axes.
Coordinate
One number in a point's address. In (x, y), x measures sideways position and y measures height from the Origin.
Cube root
The number whose cube equals the given number. It keeps the given number's sign.
Substitution
Replacing every occurrence of a letter by a chosen value or expression.
Horizontal shifts: why the inside acts in the opposite direction
Imagine a bus timetable.
g(x) = f(x − h) sends (u, v) to (u + h, v). Positive h moves right; negative h moves left. Solve new input − h = old input whenever the sign feels uncertain.
1. Find the expression inside f; it is the input the old function receives.
2. Set that expression equal to a known old input u, because this asks where the same old height appears.
3. Solve for the new input x. Add when the expression subtracts, and subtract when it adds.
4. Keep the old height v, because the function receives the same old input u.
5. Move several points and substitute their new inputs into g to check.
If f(1) = 6, locate that height on g(x) = f(x + 3).
This asks you to find the new address or height of the given graph information.
The point (1, 6) becomes (−2, 6).
Reading f(x + 3) as right 3. Set x + 3 equal to an old input: x = old input − 3, so the graph moves left. The equation explains the direction when a memorized slogan feels unreliable.
1. Translate the request: you know an old input and height, and need the new address for that same height.
2. Name the old input u. Set the expression inside f equal to u.
3. Undo the inside addition or subtraction on both sides. In x − 3 = u, add 3 to obtain x = u + 3.
4. Keep the old height v. The new point is (u + h, v).
5. Substitute the new input into the inside expression. It must give the original input u.
6. If instead asked for g at a specified input, calculate its inside value first and look up f there.
Function
A rule that gives exactly one Output for every accepted Input.
Input
The value you give a Function before its rule runs, usually labeled x.
Output
The result returned by a Function, written f(x) or y.
Graph
A picture of a Function's accepted Input and Output pairs, plotted as points (x, f(x)).
Vertical shift
Adding a Constant to every Output, moving the entire Graph up or down without changing its shape.
Horizontal shift
Replacing x by x − h moves the Graph right h; a negative h moves it left.
Inside change
A change to the Input expression before the Function runs; it changes horizontal coordinates.
Domain
All Inputs a Function accepts without an invalid calculation.
Range
All Outputs a Function can actually produce from its accepted Inputs.
Vertex
The turning point of a quadratic U, or the corner where an absolute value V changes direction.
Coordinate
One number in a point's address. In (x, y), x measures sideways position and y measures height from the Origin.
Substitution
Replacing every occurrence of a letter by a chosen value or expression.
Set
A collection of values specified together.
Combine shifts and read the domain and range
Take the same clear drawing and slide it sideways, then raise or lower it.
g(x) = f(x − h) + k sends (u, v) to (u + h, v + k). These shifts commute, meaning either order gives the same graph, because each changes a different coordinate.
1. Recognize the original toolkit shape before changing it.
2. Read h from x − h. If you see x + 2, write h = −2.
3. Read k from the addition outside the function.
4. Move the landmark and at least two other points by (h, k).
5. Check allowed inputs using the original function's restrictions, then translate the heights to obtain the range.
6. Substitute a new point into the formula and compare with its transformed height.
Find the corner of |x − 2| − 4.
This asks you to find the new address or height of the given graph information.
Corner: (2, −4).
Moving the corner correctly but leaving the old domain and range. For + 3, the allowed inputs start at −2 and the heights start at 3. Check the inside restriction and the lowest height separately.
1. Recognize the basic shape and recall its allowed inputs and outputs.
2. Read h from x − h and k from the outside addition. For x + 2, h = −2.
3. Move each old point to (u + h, v + k), including the landmark.
4. For a square root, require its inside ≥ 0 and solve. Set the inside to 0 to find the endpoint input, then substitute it to find its height.
5. For a reciprocal, set the denominator to 0 to find the forbidden input. Substitute that input into the denominator to show the zero, and exclude it.
6. Translate every original range height by k. A root's lowest height 0 becomes k; a reciprocal's missing height 0 becomes k.
7. Write each requested answer on its own line and check a moved point directly in the new formula.
Function
A rule that gives exactly one Output for every accepted Input.
Input
The value you give a Function before its rule runs, usually labeled x.
Output
The result returned by a Function, written f(x) or y.
Graph
A picture of a Function's accepted Input and Output pairs, plotted as points (x, f(x)).
Toolkit function
A familiar starting Function whose basic Graph you use to recognize and build transformed graphs.
Vertical shift
Adding a Constant to every Output, moving the entire Graph up or down without changing its shape.
Horizontal shift
Replacing x by x − h moves the Graph right h; a negative h moves it left.
Domain
All Inputs a Function accepts without an invalid calculation.
Range
All Outputs a Function can actually produce from its accepted Inputs.
Vertex
The turning point of a quadratic U, or the corner where an absolute value V changes direction.
Endpoint
A boundary point where a graph or interval starts or stops.
Asymptote
A line a Graph approaches as Inputs approach a boundary or grow without bound. Reciprocal graphs approach their asymptotes without meeting them.
Vertical reflection
Taking the opposite of every Output, so the Graph flips across the x-axis.
Reflection
A flip across a line that places each point the same distance on the opposite side.
Reciprocal
One divided by a nonzero number. Multiplying the number by its Reciprocal gives 1.
Absolute value function
The Function f(x) = |x|, returning the distance from x to 0. Its Graph is a V.
Quadratic function
A Function built from a nonzero term, an optional x term, and a Constant. The toolkit example is f(x) = .
Square root function
The toolkit Function f(x) = , returning the nonnegative number whose square is x.
Reciprocal function
The toolkit Function f(x) = . It accepts every real Input except 0 and never produces Output 0.
Axis
One of the two reference number lines on a graph. The x-axis is horizontal; the y-axis is vertical. Together they are called axes.
Translation
A slide that moves every graph point the same distance and direction. A horizontal or vertical shift is a Translation.
Coordinate
One number in a point's address. In (x, y), x measures sideways position and y measures height from the Origin.
Interval notation
A compact way to name stretches of real numbers. Brackets include endpoints, parentheses exclude them, and ∪ joins separate stretches.
Square root
The nonnegative number whose square equals the number inside the square root sign. A negative inside has no real Square root.
Term
One piece of a sum, with its attached sign.
Substitution
Replacing every occurrence of a letter by a chosen value or expression.
Denominator
The bottom of a fraction, naming the divisor. It cannot be zero.
Set
A collection of values specified together.
Nonnegative
At least zero: zero and positive real numbers.
Reflections: the minus sign tells you which coordinate changes
Imagine tracing a drawing on clear plastic and turning it over along one edge.
Vertical reflection: g(x) = −f(x), with (u, v) becoming (u, −v).
Horizontal reflection: h(x) = f(−x), with (u, v) becoming (−u, v).
1. Locate the minus sign. Outside the function means negate the output; inside with x means negate the input coordinate.
2. Choose points on the original graph. Change only the coordinate named by the reflection.
3. Check the Domain, the allowed inputs, and the Range, the resulting outputs. A horizontal reflection negates the domain values; a vertical reflection negates the range values.
4. Substitute a transformed point into the new formula. Confirm that it gives the transformed height.
Write the vertical and horizontal reflections of s(t) = 2. Give each domain and range.
This asks you to change the coordinate named by each mirror move and keep the other coordinate.
V(t) = −2
domain [0, ∞)
range (−∞, 0].
H(t) = 2
domain (−∞, 0], meaning t ≤ 0
range [0, ∞).
Choosing the mirror axis from the coordinate that changes. A vertical reflection changes y but reflects across the x-axis. A horizontal reflection changes x but reflects across the y-axis. Name the mirror line and the moving coordinate separately.
Substitute the changed input into the specified old formula.
Apply each outside operation in order.
Substitute a meaningful allowed practice amount to calculate its percentage.
Use the context to restrict inputs before reporting attainable heights.
1. Translate the request: identify the mirror line or locate the minus sign in the formula.
2. For an outside minus, keep each old input and negate its output. For an inside minus, negate each old input and keep its output.
3. Write the reflected formula by negating the whole original output, or by replacing every occurrence of its input with (−x).
4. Track the original restrictions. A horizontal flip negates the allowed input addresses; a vertical flip negates the possible heights.
5. If another outside shift follows, negate the old height first, then add the shift.
6. Substitute a reflected point into the formula. Check both its new height and that its input is allowed.
Transformation
A change to a Function that moves, flips, stretches, or compresses its Graph.
Function
A rule that gives exactly one Output for every accepted Input.
Input
The value you give a Function before its rule runs, usually labeled x.
Output
The result returned by a Function, written f(x) or y.
Graph
A picture of a Function's accepted Input and Output pairs, plotted as points (x, f(x)).
Inside change
A change to the Input expression before the Function runs; it changes horizontal coordinates.
Outside change
A change applied after the Function returns its Output; it changes vertical coordinates.
Domain
All Inputs a Function accepts without an invalid calculation.
Range
All Outputs a Function can actually produce from its accepted Inputs.
Vertex
The turning point of a quadratic U, or the corner where an absolute value V changes direction.
Vertical reflection
Taking the opposite of every Output, so the Graph flips across the x-axis.
Horizontal reflection
Replacing the Input by its opposite, so the Graph flips across the y-axis.
Reflection
A flip across a line that places each point the same distance on the opposite side.
Odd function
A Function with opposite Inputs allowed and opposite Outputs: f(−x) = −f(x). Its Graph is symmetric about the origin.
Symmetric about the y-axis
Reflecting left to right across the y-axis leaves the Graph unchanged.
Reciprocal
One divided by a nonzero number. Multiplying the number by its Reciprocal gives 1.
Point rule
The coordinate recipe for moving each graph point through a Transformation.
Constant
A fixed number that does not vary with the Input. The toolkit Constant function returns 1 for every Input.
Quadratic function
A Function built from a nonzero term, an optional x term, and a Constant. The toolkit example is f(x) = .
Axis
One of the two reference number lines on a graph. The x-axis is horizontal; the y-axis is vertical. Together they are called axes.
Coordinate
One number in a point's address. In (x, y), x measures sideways position and y measures height from the Origin.
Square root
The nonnegative number whose square equals the number inside the square root sign. A negative inside has no real Square root.
Mastery
The amount of a skill learned in a model. A percentage reports it out of one hundred.
Term
One piece of a sum, with its attached sign.
Substitution
Replacing every occurrence of a letter by a chosen value or expression.
Denominator
The bottom of a fraction, naming the divisor. It cannot be zero.
Percentage
A share expressed out of one hundred.
Nonnegative
At least zero: zero and positive real numbers.
Nonpositive
At most zero: zero and negative real numbers.
Even, odd, or neither: test the whole formula
Think of folding a paper drawing along its vertical center line.
On a domain symmetric about zero: even means f(−x) = f(x); odd means f(−x) = −f(x), for every allowed x.
If neither identity holds for all allowed inputs, the function is neither. The zero-valued function on a symmetric domain satisfies both identities.
1. Check that every allowed input x has its opposite −x in the domain. A domain that fails this condition rules out both symmetries.
2. Replace every x in the formula with (−x), including x inside powers and multiplied terms.
3. Simplify. For an even power, the minus signs cancel in pairs. For an odd power, one minus sign remains.
4. Compare the entire result with f(x). If they match for every allowed input, the function is even.
5. Separately write −f(x), distributing its minus to every term. If f(−x) matches this expression for every allowed input, the function is odd. If only the even comparison succeeded, it is even. If neither comparison succeeded, it is neither. If both succeed, it is both; the zero function on a symmetric domain does this.
Let f(x) = + 2 − 2x + 5, defined for all real numbers. A student evaluates f(1) = 6 and f(−1) = 6, sees that the two outputs match, and concludes that f is even. (a) Test the whole formula to decide whether f is even, odd, or neither. (b) Find every real x for which f(−x) = f(x), and use the result to explain why the student's check did not settle the question.
(a) Neither. f(−x) = − 2 + 2x + 5. That is not identical to f(x) = + 2 − 2x + 5, and it is not identical to −f(x) = − − 2 + 2x − 5. For example, f(2) = 33 while f(−2) = 9, and 9 is neither 33 nor −33. (b) f(−x) = f(x) only for x = −1, 0 and 1. The matching outputs at x = 1 are a coincidence and do not show the even identity for every x.
Calling a function odd because some terms change sign. Odd means the entire output changes sign, including its constant term. Compare with −f(x) written in full. A few matching number pairs can check a proof, but cannot replace an identity that covers every input.
1. Inspect the Domain to see whether every allowed x has an allowed −x. This establishes whether the symmetry tests can apply at all.
2. Replace every x by (−x), then simplify. This computes the height at the opposite address using the same rule.
3. Write −f(x), changing every term's sign. This gives the entire opposite output needed for the odd test.
4. Compare f(−x) with f(x) and with −f(x) as identities. Matching only the first means even; matching only the second means odd; matching neither means neither; matching both means both.
5. Check the result with opposite inputs, while keeping the identity as the proof. For + 2x, inputs 1 and −1 give 3 and −3, confirming the odd pairing.
Function
A rule that gives exactly one Output for every accepted Input.
Input
The value you give a Function before its rule runs, usually labeled x.
Output
The result returned by a Function, written f(x) or y.
Graph
A picture of a Function's accepted Input and Output pairs, plotted as points (x, f(x)).
Domain
All Inputs a Function accepts without an invalid calculation.
Vertex
The turning point of a quadratic U, or the corner where an absolute value V changes direction.
Horizontal reflection
Replacing the Input by its opposite, so the Graph flips across the y-axis.
Reflection
A flip across a line that places each point the same distance on the opposite side.
Even function
A Function with opposite Inputs allowed and equal Outputs: f(−x) = f(x). Its Graph is symmetric about the y-axis.
Odd function
A Function with opposite Inputs allowed and opposite Outputs: f(−x) = −f(x). Its Graph is symmetric about the origin.
Neither even nor odd
A Function that fails both required symmetry tests, including the requirement that opposite Inputs belong to its Domain.
Symmetric about the y-axis
Reflecting left to right across the y-axis leaves the Graph unchanged.
Symmetric about the origin
Turning a Graph half a turn around (0, 0) leaves it unchanged.
Origin
The point (0, 0), where the x-axis and y-axis meet.
Reciprocal
One divided by a nonzero number. Multiplying the number by its Reciprocal gives 1.
Constant
A fixed number that does not vary with the Input. The toolkit Constant function returns 1 for every Input.
Absolute value function
The Function f(x) = |x|, returning the distance from x to 0. Its Graph is a V.
Cubic function
A Function built from a nonzero term and optional lower powers. The toolkit example is f(x) = .
Reciprocal function
The toolkit Function f(x) = . It accepts every real Input except 0 and never produces Output 0.
Axis
One of the two reference number lines on a graph. The x-axis is horizontal; the y-axis is vertical. Together they are called axes.
Coordinate
One number in a point's address. In (x, y), x measures sideways position and y measures height from the Origin.
Coefficient
A fixed number multiplying a letter or expression.
Identity
An equation true for every allowed input, rather than a single numerical coincidence.
Polynomial
A finite sum of whole-number powers of the input multiplied by fixed coefficients.
Real number
A number represented by a point on the number line, including negative numbers, zero, fractions, and square roots of nonnegative numbers.
Term
One piece of a sum, with its attached sign.
Substitution
Replacing every occurrence of a letter by a chosen value or expression.
Set
A collection of values specified together.
Integer
A whole number or its negative, including zero.
Vertical stretch and compression: multiply the heights
Imagine a drawing on a rubber sheet fastened along a horizontal line.
For g(x) = a·f(x), (u, v) becomes (u, a·v). If |a| > 1, stretch vertically; if 0 < |a| < 1, compress vertically.
If a < 0, also reflect across the x-axis. If a = 0, all defined outputs become zero; this is a collapse, not an ordinary stretch or compression.
1. Find the multiplier a outside the function. Its magnitude |a| sets the size change, and its sign tells you whether to reflect.
2. Keep every input coordinate. Multiply each entire signed output by a, including outputs below zero.
3. If a shift is added outside afterward, multiply the original height first and then add the shift. The shifted graph is scaled relative to the line y = k in a·f(x) + k.
4. Keep the original domain. Multiply the original range values by a, reversing their order when a is negative.
5. Check a transformed point by substituting its unchanged input into the new formula.
Let f(x) = − 2. Its domain is [−4, ∞) and its range is [−2, ∞). The table lists five points on the graph of f: (−4, −2), (−3, −1), (0, 0), (5, 1) and (12, 2). Let g(x) = −3·f(x). (a) Identify the multiplier and describe how the graph of g is obtained from the graph of f. (b) Find the five corresponding points on the graph of g, and write g(x) as a formula in x. (c) State the domain and range of g. (d) Let h(x) = −3·f(x) + 1. Find the point on the graph of h that comes from (12, 2), and state the range of h.
(a) a = −3: a vertical stretch by a factor of 3 and a reflection across the x-axis. (b) (−4, 6), (−3, 3), (0, 0), (5, −3), (12, −6); g(x) = −3 + 6. (c) Domain [−4, ∞), range (−∞, 6]. (d) The point is (12, −5); the range of h is (−∞, 7].
Saying a stretch moves every point upward. A positive scale larger than 1 sends positive outputs up and negative outputs down, increasing distance from the x-axis. Also keep a·f(x) separate from f(ax): the bottom two table rows preview the horizontal-coordinate changes explained in lesson 7.
1. Identify the outside factor a. Its magnitude gives the distance change and its sign gives the reflection.
2. Keep each known input and multiply its output by a. This finds the new height at that same address; for (2, 5) and a = 3, the new height is 3 × 5 = 15.
3. If there is a final outside shift k, add it to the scaled height. This finishes the change in the written order; for old height 5 in −2f(x) + 3, compute −10 + 3 = −7.
4. Keep the original Domain and apply the same height calculation to the Range. A negative multiplier reverses ordered endpoints; [1, 5] scaled by −2 becomes [−10, −2].
5. Substitute an unchanged input into the transformed formula to check its output. For c(x) = f(x) and f(2) = 5, c(2) = , and doubling this result recovers 5.
Transformation
A change to a Function that moves, flips, stretches, or compresses its Graph.
Function
A rule that gives exactly one Output for every accepted Input.
Input
The value you give a Function before its rule runs, usually labeled x.
Output
The result returned by a Function, written f(x) or y.
Graph
A picture of a Function's accepted Input and Output pairs, plotted as points (x, f(x)).
Domain
All Inputs a Function accepts without an invalid calculation.
Range
All Outputs a Function can actually produce from its accepted Inputs.
Endpoint
A boundary point where a graph or interval starts or stops.
Vertical reflection
Taking the opposite of every Output, so the Graph flips across the x-axis.
Reflection
A flip across a line that places each point the same distance on the opposite side.
Vertical stretch
Multiplying every height by a factor greater than 1 in magnitude, increasing distances from the x-axis. A negative factor also reflects.
Vertical compression
Multiplying heights by a nonzero factor smaller than 1 in magnitude, reducing distances from the x-axis. A negative factor also reflects.
Horizontal stretch
Multiplying sideways distances by a factor greater than 1. In f(bx), use 0 < |b| < 1; a negative b also reflects.
Horizontal compression
Multiplying sideways distances by a factor between 0 and 1. In f(bx), use |b| > 1; a negative b also reflects.
Scale factor
The positive multiplier describing how distances change. Vertical distance scales by |a|; horizontal distance scales by the Reciprocal of |b|.
Identity function
The Function f(x) = x, which returns its Input unchanged.
Cubic function
A Function built from a nonzero term and optional lower powers. The toolkit example is f(x) = .
Axis
One of the two reference number lines on a graph. The x-axis is horizontal; the y-axis is vertical. Together they are called axes.
Reference point
A recognizable point you track to identify or sketch a Transformation.
Order of operations
The agreed sequence for reading arithmetic: parentheses, powers, multiplication and division, then addition and subtraction; tied operations go left to right.
Coordinate
One number in a point's address. In (x, y), x measures sideways position and y measures height from the Origin.
Identity
An equation true for every allowed input, rather than a single numerical coincidence.
Magnitude
The size of a number without its sign, measured as distance from zero.
Substitution
Replacing every occurrence of a letter by a chosen value or expression.
Denominator
The bottom of a fraction, naming the divisor. It cannot be zero.
Nonnegative
At least zero: zero and positive real numbers.
Nonpositive
At most zero: zero and negative real numbers.
Ratio
A comparison made by dividing one quantity by another nonzero quantity.
x-intercept
A graph point on the x-axis, where its output is zero.
Horizontal stretch and compression: divide the input coordinates
Imagine playing a recording at double speed.
g(x) = f(bx), b ≠ 0, sends (u, v) to (, v). |b| > 1 compresses horizontally; 0 < |b| < 1 stretches horizontally. If b < 0, also reflect across the y-axis.
1. Find b, the multiplier of the input before f receives it.
2. Set bx = u for each known old input u, because this recreates its old height.
3. Divide the old input by b, including the sign. A fractional b calls for division by a fraction.
4. Keep the old height unless an outside change is also present.
5. Move endpoints, corners, and several other points before drawing the curve.
6. Substitute the new input into bx to check that it returns u.
Move old point (4, 2) of to g(x) = .
This asks you to change the coordinate named by each mirror move and keep the other coordinate.
Calling f(2x) a horizontal stretch because 2 is bigger than 1. The multiplier is bigger, but the coordinate must be smaller: 2x = u gives x = u ÷ 2. Also, f(2x) and 2f(x) generally give different graphs.
1. Identify b and verify b ≠ 0 before using the coordinate division rule. This prevents dividing by zero.
2. Set bx = u for a known old input u. This equation finds the new address that reproduces its old height.
3. Divide both sides by b, including its sign. For u = 4 and b = −2, x = −2, and substituting back gives −2 × (−2) = 4.
4. Keep the matching old output. For old point (4, 2) of , this gives new point (−2, 2) on .
5. Move the other landmarks using the same division, and rebuild the Domain from the allowed old inputs. In , require −2x ≥ 0 to find valid inputs, then divide by −2 and reverse the comparison: x ≤ 0.
6. Check a new input inside the formula and use only known table entries. For g(x) = f(x), g(12) = f(6) = 7 is known, while g(2) needs the unavailable f(1).
Transformation
A change to a Function that moves, flips, stretches, or compresses its Graph.
Function
A rule that gives exactly one Output for every accepted Input.
Input
The value you give a Function before its rule runs, usually labeled x.
Output
The result returned by a Function, written f(x) or y.
Graph
A picture of a Function's accepted Input and Output pairs, plotted as points (x, f(x)).
Horizontal shift
Replacing x by x − h moves the Graph right h; a negative h moves it left.
Inside change
A change to the Input expression before the Function runs; it changes horizontal coordinates.
Outside change
A change applied after the Function returns its Output; it changes vertical coordinates.
Domain
All Inputs a Function accepts without an invalid calculation.
Range
All Outputs a Function can actually produce from its accepted Inputs.
Vertex
The turning point of a quadratic U, or the corner where an absolute value V changes direction.
Endpoint
A boundary point where a graph or interval starts or stops.
Horizontal reflection
Replacing the Input by its opposite, so the Graph flips across the y-axis.
Reflection
A flip across a line that places each point the same distance on the opposite side.
Horizontal stretch
Multiplying sideways distances by a factor greater than 1. In f(bx), use 0 < |b| < 1; a negative b also reflects.
Horizontal compression
Multiplying sideways distances by a factor between 0 and 1. In f(bx), use |b| > 1; a negative b also reflects.
Reciprocal
One divided by a nonzero number. Multiplying the number by its Reciprocal gives 1.
Point rule
The coordinate recipe for moving each graph point through a Transformation.
Square root function
The toolkit Function f(x) = , returning the nonnegative number whose square is x.
Axis
One of the two reference number lines on a graph. The x-axis is horizontal; the y-axis is vertical. Together they are called axes.
Coordinate
One number in a point's address. In (x, y), x measures sideways position and y measures height from the Origin.
Square root
The nonnegative number whose square equals the number inside the square root sign. A negative inside has no real Square root.
Coefficient
A fixed number multiplying a letter or expression.
Magnitude
The size of a number without its sign, measured as distance from zero.
Substitution
Replacing every occurrence of a letter by a chosen value or expression.
Set
A collection of values specified together.
Nonnegative
At least zero: zero and positive real numbers.
Put everything together: factor first, then move points
Think of moving a printed map after changing its size on a copier.
For g(x) = a·f(b(x − h)) + k with b ≠ 0, the Point rule is (u, v) to ( + h, a·v + k). Factor first; scale or reflect each coordinate before shifting that coordinate.
1. Recognize f and its domain, range, and landmarks.
2. Factor the entire input into b(x − h). Distribute it back out to verify the factoring.
3. Label a, b, h, and k, keeping every sign.
4. For each old point (u, v), compute new x = u ÷ b + h.
5. Compute new y = a·v + k. Multiply before adding because that is the outside formula's order.
6. Move at least three points and any asymptotes or endpoints; draw the transformed shape.
7. Find the new domain from b(x − h) belonging to the old domain, and the new range from a·v + k over old range values.
8. Substitute a moved point into the original unfactored formula as a second check.
Let f(x) = − 2x, defined for all real numbers. Its graph is an upward-opening parabola with vertex (2, −2) that passes through the five points (−2, 6), (0, 0), (2, −2), (4, 0) and (6, 6). Let g(x) = −·f(−2x + 8) + 1. (a) Factor the input −2x + 8 into the form b(x − h), and state a, b, h and k. (b) Find the five points on the graph of g that correspond to the five given points of f. (c) Give the vertex of g, say which way its graph opens, and state the domain and range of g. (d) Check one of your new points by substituting it into the original formula g(x) = −·f(−2x + 8) + 1.
(a) −2x + 8 = −2(x − 4), so a = −, b = −2, h = 4, k = 1. (b) (−2, 6) → (5, −2), (0, 0) → (4, 1), (2, −2) → (3, 2), (4, 0) → (2, 1), (6, 6) → (1, −2). (c) The vertex is (3, 2) and the graph opens downward. The domain of g is (−∞, ∞) and the range is (−∞, 2]. (d) At x = 5: −2(5) + 8 = −2, f(−2) = 6, and −(6) + 1 = −2, so (5, −2) is on the graph of g ✓.
Using 6 as the final shift in f(2x − 6), or shifting a height before scaling it. Factor the input and write the two coordinate equations. For a·f(b(x − h)) + k, divide then add h horizontally, and multiply then add k vertically.
1. Name the original Function and its available points. Record restrictions before moving the graph so a forbidden input cannot become a supplied value.
2. Factor the inside into b(x − h), with b ≠ 0. This reveals the shift after the horizontal scale; 2x − 6 = 2(x − 3) identifies b = 2 and h = 3. Distribute to check the rewrite.
3. Solve b(X − h) = u for each old input u. This finds where its old output appears: divide by b and add h to obtain X = + h.
4. Compute Y = a·v + k from its matching old output v. This applies the outside scale before the final shift.
5. Move landmarks and several other points, or build the transformed table column by column. Keep every old input paired with its own old output.
6. Rebuild the Domain from the inner restrictions and the Range from the transformed heights. For −2(x − 3 + 4, all inputs remain allowed and the nonnegative square shows that heights cannot exceed 4; the vertex reaches 4.
7. Check using the original expression. For old point (4, 1) and g(x) = f(2x − 6), new input 5 gives g(5) = f(4) = 1, confirming the moved point.
Transformation
A change to a Function that moves, flips, stretches, or compresses its Graph.
Function
A rule that gives exactly one Output for every accepted Input.
Input
The value you give a Function before its rule runs, usually labeled x.
Output
The result returned by a Function, written f(x) or y.
Graph
A picture of a Function's accepted Input and Output pairs, plotted as points (x, f(x)).
Vertical shift
Adding a Constant to every Output, moving the entire Graph up or down without changing its shape.
Horizontal shift
Replacing x by x − h moves the Graph right h; a negative h moves it left.
Outside change
A change applied after the Function returns its Output; it changes vertical coordinates.
Domain
All Inputs a Function accepts without an invalid calculation.
Range
All Outputs a Function can actually produce from its accepted Inputs.
Vertex
The turning point of a quadratic U, or the corner where an absolute value V changes direction.
Endpoint
A boundary point where a graph or interval starts or stops.
Asymptote
A line a Graph approaches as Inputs approach a boundary or grow without bound. Reciprocal graphs approach their asymptotes without meeting them.
Reflection
A flip across a line that places each point the same distance on the opposite side.
Even function
A Function with opposite Inputs allowed and equal Outputs: f(−x) = f(x). Its Graph is symmetric about the y-axis.
Odd function
A Function with opposite Inputs allowed and opposite Outputs: f(−x) = −f(x). Its Graph is symmetric about the origin.
Horizontal stretch
Multiplying sideways distances by a factor greater than 1. In f(bx), use 0 < |b| < 1; a negative b also reflects.
Horizontal compression
Multiplying sideways distances by a factor between 0 and 1. In f(bx), use |b| > 1; a negative b also reflects.
Sequence of transformations
The ordered changes used to redraw a Graph. Two changes on the same coordinate can give different results when reversed.
Point rule
The coordinate recipe for moving each graph point through a Transformation.
Constant
A fixed number that does not vary with the Input. The toolkit Constant function returns 1 for every Input.
Axis
One of the two reference number lines on a graph. The x-axis is horizontal; the y-axis is vertical. Together they are called axes.
Factoring
Rewriting an expression as a product without changing its value. For transformations, this exposes the actual inside shift.
Coordinate
One number in a point's address. In (x, y), x measures sideways position and y measures height from the Origin.
Square root
The nonnegative number whose square equals the number inside the square root sign. A negative inside has no real Square root.
Coefficient
A fixed number multiplying a letter or expression.
Radicand
The whole expression inside a root sign.
Real number
A number represented by a point on the number line, including negative numbers, zero, fractions, and square roots of nonnegative numbers.
Term
One piece of a sum, with its attached sign.
Substitution
Replacing every occurrence of a letter by a chosen value or expression.
Set
A collection of values specified together.
Nonnegative
At least zero: zero and positive real numbers.
Nonpositive
At most zero: zero and negative real numbers.