Rates of change and behavior of graphs — quick review
Rate of change and average rate of change
A rate of change tells you how much one quantity changes for each single unit of another.
Average rate of change = = = , with ≠ and both outputs defined. Use the same endpoint order on top and bottom. Units are output units per input unit.
Name the input and output, including their units.
For a left-to-right calculation, call the smaller input and the larger input ; keep each output with its input.
Find Δy = − and Δx = − , using the same order.
Check Δx ≠ 0, then divide Δy by Δx.
Attach output units per input unit. With inputs in increasing order, positive means a net rise and negative a net fall.
Find two distinct input values and their outputs.
Read a table column, read a graph height, or evaluate a formula, depending on what is given.
Subtract the two outputs and the two inputs in matching order.
Divide and state units; keep exact fractions until a rounded answer is requested.
A regional energy office records the average price of one gallon of regular gasoline each year. Let P(t) be the price in dollars per gallon in year t. The table gives these values.
Year t: 2014, 2016, 2019, 2021
Price P(t) ($/gal): 3.36, 2.14, 2.60, 3.01
(a) Find the average rate of change of the gas price from 2014 to 2021. Give units and say what the sign means.
(b) Find the average rate of change from 2016 to 2021. Explain why the signs in (a) and (b) differ, even though both intervals end in 2021.
(a) = = −0.05 dollars per gallon per year, a net fall of 5 cents per gallon per year from 2014 to 2021. (b) = = 0.174 dollars per gallon per year, a net rise of about 17.4 cents per gallon per year from 2016 to 2021.
Subtracting in different orders on top and bottom flips the sign. Point 2 minus point 1 must be used for both output and input changes.
Rate of change
How much an output changes per unit change in the input. Units are output units per input unit, such as miles per hour, dollars per year, or amperes per volt.
Average rate of change
The output change divided by the matching nonzero input change between two inputs. It is the slope of the straight ruler line joining their graph points, regardless of the path between.
Increasing
A function is increasing on an interval when bigger inputs always give bigger outputs there. Its graph climbs as you move from left to right.
Decreasing
A function is decreasing on an interval when bigger inputs always give smaller outputs there. Its graph drops as you move from left to right.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Evaluate
Find an output by substituting an allowed input into every variable position and following the operations.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Endpoint
A boundary of a graph piece or interval. A finite endpoint can be included or excluded. Course local comparisons need inputs on both sides.
Rise
The signed vertical change between two points, using the same end-minus-start order as the run.
Run
The signed horizontal change between two points, using the same end-minus-start order as the rise.
Subscript
A small lower label naming a quantity. It is a name tag, not a power or multiplication.
Superscript
A small raised symbol. When it is an exponent, it tells how many equal factors are multiplied.
Δx
The signed change in input: ending input minus starting input. It must be nonzero in an average-rate denominator.
Δy
The signed change in output: ending output minus starting output.
Δf
Another name for the change in a function’s output values. It refers to the same function at two inputs.
Difference
The result of subtraction, retaining its sign. In a rate it measures an end value minus a start value.
Quotient
The result of division. A rate quotient divides output change by a nonzero input change.
Denominator
The bottom of a fraction. It names the equal-piece size and must be nonzero.
Reduce
Rename a fraction by dividing numerator and denominator by the same nonzero shared factor. The value stays the same.
Power
A repeated multiplication of the same base. The exponent records how many factors are used for a positive whole-number power.
Undefined
Having no value under the rule being used. Division by zero is undefined.
Per
For each one unit of another quantity. It names the division used in a rate.
Quarter
In a time-rate problem, one fourth of a year, equal to three months. In money, the same word can mean a 25-cent coin.
On a graph, the average rate of change is a slope
On a graph, each input and its output make a point: the input tells you how far across, the output tells you how high.
For [a, b] = [left end, right end], with a < b and both outputs defined, average rate = . This is the slope of the straight ruler through (a, f(a)) and (b, f(b)).
Locate both interval endpoints on the horizontal axis.
At each input, move vertically to the solid graph and read its height. Count grid steps; estimate if it lies between lines.
Subtract right height minus left height, then right input minus left input.
Divide rise by run and interpret the sign.
Read two curve heights before doing arithmetic.
Write the paired points or function values so the endpoint order is visible.
Compute vertical change divided by horizontal change.
Describe the average net rise or fall per unit.
The graph of f(x) = − 1 is drawn on a grid where each square is 1 unit. Read the graph to find the average rate of change of f over [−1, 3]. Say what the sign means.
Average rate of change = = = 2. On average, f increases by 2 units for each 1-unit increase in x over [−1, 3].
Putting right-minus-left on top and left-minus-right on the bottom reverses the sign. Keep each input paired with its output and use one order twice.
Rate of change
How much an output changes per unit change in the input. Units are output units per input unit, such as miles per hour, dollars per year, or amperes per volt.
Average rate of change
The output change divided by the matching nonzero input change between two inputs. It is the slope of the straight ruler line joining their graph points, regardless of the path between.
Decreasing
A function is decreasing on an interval when bigger inputs always give smaller outputs there. Its graph drops as you move from left to right.
Constant
A function is constant on an interval when its output stays the same for every input there. Its graph is a flat, horizontal piece.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Horizontal axis
The graph’s left-to-right reference line. It usually shows inputs, such as x or time t.
Vertical axis
The graph’s up-and-down reference line. It usually measures outputs, such as y or distance.
Scale
The amount represented by one marked spacing on an axis. Read its labels before counting spaces.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Endpoint
A boundary of a graph piece or interval. A finite endpoint can be included or excluded. Course local comparisons need inputs on both sides.
Hollow dot
An unfilled marker showing that a displayed endpoint or point is excluded from the graph or set.
Slope
A line’s vertical change divided by the matching horizontal change. It is undefined when the horizontal change is zero.
Rise
The signed vertical change between two points, using the same end-minus-start order as the run.
Run
The signed horizontal change between two points, using the same end-minus-start order as the rise.
Quotient
The result of division. A rate quotient divides output change by a nonzero input change.
Estimate
Read or calculate an approximate value when an exact value is unavailable. Mark it with ≈ and state the precision when needed.
Parabola
The U-shaped graph of a quadratic function, opening upward or downward.
Numerator
The top of a fraction. It counts how many equal pieces are being represented.
Denominator
The bottom of a fraction. It names the equal-piece size and must be nonzero.
Undefined
Having no value under the rule being used. Division by zero is undefined.
Average speed
Distance traveled divided by elapsed time. If distance from home increases throughout a trip without reversals, its rate gives the same average speed.
Per
For each one unit of another quantity. It names the division used in a rate.
Average rate of change from a formula
When the function is given as a formula, you build a small table of your own.
On [a, b] = [left end, right end], with a < b and both outputs defined, average rate = . Evaluate the two endpoint outputs first, then subtract and divide. Preserve all nonzero-bottom and square-root restrictions.
Check that both inputs are allowed: no bottom may be zero, and a real square root needs a nonnegative inside.
Evaluate f(a), placing the whole input in parentheses at every variable position.
Evaluate f(b) the same way.
Subtract f(b) − f(a). If fractions occur, make their bottoms match first.
Divide by b − a. Simplify exact fractions and attach units.
Check endpoint restrictions.
Evaluate the formula twice using powers before multiplication, then addition and subtraction.
Compute the output difference with parentheses around a negative starting output.
Divide by the matching input difference and keep the result exact.
Two small charged spheres repel each other. The size of the force between them is F(r) = newtons, where r is the distance between the spheres in meters. Find the average rate of change of F on the interval [2, 4]. Give an exact answer with units.
The average rate of change is − N per m, which is −3.375 N/m. On average, the force drops by newtons for each meter of extra separation.
Stopping after subtracting gives only the output change. Divide by the input change to get the average rate.
Rate of change
How much an output changes per unit change in the input. Units are output units per input unit, such as miles per hour, dollars per year, or amperes per volt.
Average rate of change
The output change divided by the matching nonzero input change between two inputs. It is the slope of the straight ruler line joining their graph points, regardless of the path between.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Evaluate
Find an output by substituting an allowed input into every variable position and following the operations.
Range
The set of output values the function actually reaches. A nearby height or a limiting height need not belong to it.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Endpoint
A boundary of a graph piece or interval. A finite endpoint can be included or excluded. Course local comparisons need inputs on both sides.
Slope
A line’s vertical change divided by the matching horizontal change. It is undefined when the horizontal change is zero.
Rise
The signed vertical change between two points, using the same end-minus-start order as the run.
Run
The signed horizontal change between two points, using the same end-minus-start order as the rise.
Difference
The result of subtraction, retaining its sign. In a rate it measures an end value minus a start value.
Exact value
A value without rounding error, such as a fraction or an unevaluated radical.
Numerator
The top of a fraction. It counts how many equal pieces are being represented.
Denominator
The bottom of a fraction. It names the equal-piece size and must be nonzero.
Common denominator
A matching nonzero denominator used to rewrite fractions before adding or subtracting them.
Reciprocal
The multiplicative inverse of a nonzero number. A nonzero fraction’s reciprocal swaps its numerator and denominator.
Expand
Multiply out a product or power and combine like terms. Every factor must reach every term it multiplies.
Term
A piece of an expression separated from other pieces by plus or minus signs. Its sign belongs with it.
Square root
The nonnegative number whose square is the number inside . A real square root requires a nonnegative inside.
Power
A repeated multiplication of the same base. The exponent records how many factors are used for a positive whole-number power.
Newton
A unit that measures force, a push or pull. The force example treats newtons as output units, so no physics calculation is needed.
Force
A push or pull, measured in newtons in the section’s distance example.
Per
For each one unit of another quantity. It names the division used in a rate.
Secant line
A straight line through two distinct points on a graph. Its slope is the average rate between the two inputs.
Nonnegative
Zero or positive. It includes 0 and excludes every negative real number.
Variable
A letter standing for a number, which can vary or be unknown.
When an endpoint is a letter, the answer is an expression
Sometimes one end of the interval is a letter, like [0, a] or [5, a].
For a fixed input 5 and an endpoint a, rate = , with a ≠ 5 and both outputs defined. On [5, a], a > 5; if a < 5, use the sorted interval [a, 5]. Factor a polynomial numerator before canceling a matching whole factor.
Evaluate the fixed numerical endpoint.
Substitute the endpoint letter to write the other output.
Subtract the outputs and write the matching input difference.
For a polynomial, factor the numerator and verify by multiplying back.
Cancel only a matching factor multiplying the whole numerator, preserving the original restrictions.
If the rate is given, set the simplified rate expression equal to that number, solve, and check the endpoint in the original quotient.
Build the endpoint quotient before simplifying.
Record all excluded inputs from function bottoms and the input difference.
Use common factors, a difference of squares, or the sum-and-product factor puzzle when applicable.
If requested, solve the rate equation and check the candidate in the original quotient.
Let f(x) = − 2x − 2. (a) Write the average rate of change of f between the inputs 5 and a, where a ≠ 5, as a simplified expression in a. (b) The average rate of change of f between 5 and a equals 7. Find a and state the interval.
(a) The rate is a + 3, for a ≠ 5. (b) a = 4, and the interval is [4, 5].
Canceling pieces of sums instead of whole multiplied factors, or forgetting the excluded endpoint after cancellation.
Rate of change
How much an output changes per unit change in the input. Units are output units per input unit, such as miles per hour, dollars per year, or amperes per volt.
Average rate of change
The output change divided by the matching nonzero input change between two inputs. It is the slope of the straight ruler line joining their graph points, regardless of the path between.
Difference quotient
The average rate from a starting input x to an ending input x + h: . The signed step h is nonzero, and both inputs must be allowed.
Increasing
A function is increasing on an interval when bigger inputs always give bigger outputs there. Its graph climbs as you move from left to right.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Evaluate
Find an output by substituting an allowed input into every variable position and following the operations.
Solve
Find every allowed input that makes an equation true.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Endpoint
A boundary of a graph piece or interval. A finite endpoint can be included or excluded. Course local comparisons need inputs on both sides.
Slope
A line’s vertical change divided by the matching horizontal change. It is undefined when the horizontal change is zero.
Difference
The result of subtraction, retaining its sign. In a rate it measures an end value minus a start value.
Quotient
The result of division. A rate quotient divides output change by a nonzero input change.
Parabola
The U-shaped graph of a quadratic function, opening upward or downward.
Numerator
The top of a fraction. It counts how many equal pieces are being represented.
Denominator
The bottom of a fraction. It names the equal-piece size and must be nonzero.
Reciprocal
The multiplicative inverse of a nonzero number. A nonzero fraction’s reciprocal swaps its numerator and denominator.
Factor
One of the quantities being multiplied in a product. A factor can cancel only when it multiplies an entire numerator or denominator.
Factoring
Rewriting a sum or difference as a product. It reverses distribution and makes shared factors visible.
Term
A piece of an expression separated from other pieces by plus or minus signs. Its sign belongs with it.
Difference of squares
One square subtracted from another. It factors as a matching minus and plus pair because the middle products cancel.
Undefined
Having no value under the rule being used. Division by zero is undefined.
Linear equation
An equation whose variable appears only to the first power. Equal operations on both sides isolate its unknown.
Per
For each one unit of another quantity. It names the division used in a rate.
Secant line
A straight line through two distinct points on a graph. Its slope is the average rate between the two inputs.
Polynomial
An expression formed by adding constants and numerical multiples of positive whole-number powers of its variable. Its expanded form has no variable in a denominator or root.
Coefficient
The numerical multiplier of a term, including its sign.
Expression
Numbers, variables, and operations that describe a value. An equation sets two expressions equal.
The difference quotient: average rate of change from x to x + h
The difference quotient has two ordinary actions hidden in its name.
Difference quotient = , with h ≠ 0 and both outputs defined. It is the average rate on [x, x + h] if h > 0, and on the sorted interval [x + h, x] if h < 0.
1. Plug in: replace every x in the formula by the whole input (x + h); multiply out the needed products.
2. Subtract: write −(f(x)) with parentheses, then let that minus reach every term.
3. Simplify: combine like terms; for a fully expanded polynomial, the terms independent of h cancel.
4. Cancel h: when h multiplies the entire numerator, divide that nonzero factor out; keep every original restriction.
Plug in the whole input x + h.
Subtract the whole starting output f(x).
Simplify using the right arithmetic for the formula.
Cancel only a whole nonzero common factor, and state the restrictions.
This asks for the average rate over any nonzero input step h starting at any input x. Find for g(x) = 6 − 2x. The plan is plug in, subtract, simplify, then cancel h.
−2, with h ≠ 0.
For each 1 unit right, g drops 2 output units. This rate holds for both positive and negative signed steps.
Adding h to the old output, treating f as a multiplier, or allowing a zero input step. Substitute x + h into the whole function formula and keep h ≠ 0.
Rate of change
How much an output changes per unit change in the input. Units are output units per input unit, such as miles per hour, dollars per year, or amperes per volt.
Average rate of change
The output change divided by the matching nonzero input change between two inputs. It is the slope of the straight ruler line joining their graph points, regardless of the path between.
Difference quotient
The average rate from a starting input x to an ending input x + h: . The signed step h is nonzero, and both inputs must be allowed.
Constant
A function is constant on an interval when its output stays the same for every input there. Its graph is a flat, horizontal piece.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Solve
Find every allowed input that makes an equation true.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Endpoint
A boundary of a graph piece or interval. A finite endpoint can be included or excluded. Course local comparisons need inputs on both sides.
Slope
A line’s vertical change divided by the matching horizontal change. It is undefined when the horizontal change is zero.
Rise
The signed vertical change between two points, using the same end-minus-start order as the run.
Difference
The result of subtraction, retaining its sign. In a rate it measures an end value minus a start value.
Quotient
The result of division. A rate quotient divides output change by a nonzero input change.
Parabola
The U-shaped graph of a quadratic function, opening upward or downward.
Vertex
The turning point of a parabola, or the corner of a V-shaped absolute-value graph. Its coordinates give both location and height.
Numerator
The top of a fraction. It counts how many equal pieces are being represented.
Factor
One of the quantities being multiplied in a product. A factor can cancel only when it multiplies an entire numerator or denominator.
Factoring
Rewriting a sum or difference as a product. It reverses distribution and makes shared factors visible.
Expand
Multiply out a product or power and combine like terms. Every factor must reach every term it multiplies.
Distributive property
A multiplier outside parentheses multiplies each term inside. It works with positive and negative multipliers.
Term
A piece of an expression separated from other pieces by plus or minus signs. Its sign belongs with it.
Like terms
Terms with the same variable factors and powers. Their numerical multipliers can combine; different variable patterns cannot.
Power
A repeated multiplication of the same base. The exponent records how many factors are used for a positive whole-number power.
Undefined
Having no value under the rule being used. Division by zero is undefined.
Average speed
Distance traveled divided by elapsed time. If distance from home increases throughout a trip without reversals, its rate gives the same average speed.
Per
For each one unit of another quantity. It names the division used in a rate.
Secant line
A straight line through two distinct points on a graph. Its slope is the average rate between the two inputs.
Constant function
A function returning one fixed output c for every allowed input. c names one chosen number.
Polynomial
An expression formed by adding constants and numerical multiples of positive whole-number powers of its variable. Its expanded form has no variable in a denominator or root.
Coefficient
The numerical multiplier of a term, including its sign.
Expression
Numbers, variables, and operations that describe a value. An equation sets two expressions equal.
Constant term
A term with no changing variable. It stays fixed as the input changes.
Difference quotient of a quadratic
A quadratic polynomial uses constants, multiples of the input, and a nonzero multiple of the squared input.
(x + h = + 2xh + . For f(x) = , the difference quotient is 2x + h, with h ≠ 0. Multiply any outside coefficient into every expanded term, subtract all of f(x), then factor the whole numerator before canceling h.
1. Plug in: replace every x by (x + h), multiply out the square, and apply each outside multiplier.
2. Subtract: keep all of f(x) in parentheses after a minus, then flip every term's sign.
3. Simplify: combine matching polynomial terms; the terms independent of h cancel.
4. Cancel h: write every remaining term as h times something, factor h from the whole numerator, and cancel only for h ≠ 0.
Plug in and multiply the square into four products.
Subtract the complete original formula with parentheses.
Simplify by grouping like terms.
Factor a whole nonzero h and keep the original restriction.
A rectangular garden plot is x meters wide and 2x meters long. A 2 square-meter corner is set aside for a compost bin, so the planted area is A(x) = 2 − 2 square meters. The graph of y = 2 − 2 passes through (2, 6) and (3, 16), and its lowest point is (0, −2). (a) Find and simplify the difference quotient for h ≠ 0. (b) Use your result with x = 2 and h = 1 to find the average rate of change of the planted area as the width grows from 2 m to 3 m.
(a) = 4x + 2h, for h ≠ 0. (b) 10 square meters per meter. The planted area grows by 10 for each meter of added width, on average, from 2 m to 3 m.
Losing the middle term, squaring an outside coefficient, or forgetting that ÷ h = h. Show the full square expansion before subtracting.
Rate of change
How much an output changes per unit change in the input. Units are output units per input unit, such as miles per hour, dollars per year, or amperes per volt.
Average rate of change
The output change divided by the matching nonzero input change between two inputs. It is the slope of the straight ruler line joining their graph points, regardless of the path between.
Difference quotient
The average rate from a starting input x to an ending input x + h: . The signed step h is nonzero, and both inputs must be allowed.
Constant
A function is constant on an interval when its output stays the same for every input there. Its graph is a flat, horizontal piece.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Evaluate
Find an output by substituting an allowed input into every variable position and following the operations.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Slope
A line’s vertical change divided by the matching horizontal change. It is undefined when the horizontal change is zero.
Difference
The result of subtraction, retaining its sign. In a rate it measures an end value minus a start value.
Quotient
The result of division. A rate quotient divides output change by a nonzero input change.
Parabola
The U-shaped graph of a quadratic function, opening upward or downward.
Vertex
The turning point of a parabola, or the corner of a V-shaped absolute-value graph. Its coordinates give both location and height.
Numerator
The top of a fraction. It counts how many equal pieces are being represented.
Denominator
The bottom of a fraction. It names the equal-piece size and must be nonzero.
Factor
One of the quantities being multiplied in a product. A factor can cancel only when it multiplies an entire numerator or denominator.
Expand
Multiply out a product or power and combine like terms. Every factor must reach every term it multiplies.
Term
A piece of an expression separated from other pieces by plus or minus signs. Its sign belongs with it.
Like terms
Terms with the same variable factors and powers. Their numerical multipliers can combine; different variable patterns cannot.
Power
A repeated multiplication of the same base. The exponent records how many factors are used for a positive whole-number power.
Per
For each one unit of another quantity. It names the division used in a rate.
Secant line
A straight line through two distinct points on a graph. Its slope is the average rate between the two inputs.
Polynomial
An expression formed by adding constants and numerical multiples of positive whole-number powers of its variable. Its expanded form has no variable in a denominator or root.
Coefficient
The numerical multiplier of a term, including its sign.
Expression
Numbers, variables, and operations that describe a value. An equation sets two expressions equal.
Linear term
A numerical multiple of the input to the first power.
Constant term
A term with no changing variable. It stays fixed as the input changes.
Difference quotient of a fraction
When the input sits in the bottom of a fraction, the output change becomes one fraction minus another with different bottoms.
For f(x) = , combine the output difference over x(x + h), then divide by h to obtain . Require h ≠ 0, x ≠ 0, and x + h ≠ 0. Other fraction bottoms need their own product as the common bottom.
1. Plug in: replace every input occurrence, including those below a fraction bar, by the whole new input.
2. Subtract: use the product of the original bottoms as a common bottom, multiply each top by its missing factor, and keep the second top grouped.
3. Simplify: distribute the outside minus and combine the numerator terms.
4. Cancel a valid h factor: multiply by , cancel only a whole nonzero factor, and keep all original restrictions.
Plug in and record every nonzero-bottom condition.
Subtract using a common bottom for the two output fractions.
Simplify the combined top while leaving the bottom as a product.
Divide by the step through multiplication by , and cancel only a whole factor.
This asks for a reusable average-rate formula when the input is in a fraction bottom. Find for f(x) = .
, with h ≠ 0, x ≠ 0, and x + h ≠ 0.
Subtracting bottoms, splitting a denominator sum, or losing the minus on the second numerator. Use a common bottom, subtract the whole second top, then divide by h.
Difference quotient
The average rate from a starting input x to an ending input x + h: . The signed step h is nonzero, and both inputs must be allowed.
Constant
A function is constant on an interval when its output stays the same for every input there. Its graph is a flat, horizontal piece.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Domain
The entire set of inputs a function accepts, including any stated restrictions. A chosen averaging interval can be only part of it.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Endpoint
A boundary of a graph piece or interval. A finite endpoint can be included or excluded. Course local comparisons need inputs on both sides.
Slope
A line’s vertical change divided by the matching horizontal change. It is undefined when the horizontal change is zero.
Difference
The result of subtraction, retaining its sign. In a rate it measures an end value minus a start value.
Quotient
The result of division. A rate quotient divides output change by a nonzero input change.
Numerator
The top of a fraction. It counts how many equal pieces are being represented.
Denominator
The bottom of a fraction. It names the equal-piece size and must be nonzero.
Common denominator
A matching nonzero denominator used to rewrite fractions before adding or subtracting them.
Reciprocal
The multiplicative inverse of a nonzero number. A nonzero fraction’s reciprocal swaps its numerator and denominator.
Factor
One of the quantities being multiplied in a product. A factor can cancel only when it multiplies an entire numerator or denominator.
Term
A piece of an expression separated from other pieces by plus or minus signs. Its sign belongs with it.
Undefined
Having no value under the rule being used. Division by zero is undefined.
Reciprocal function
The toolkit function f(x) = , defined for x ≠ 0. It decreases on each separate side of 0.
Polynomial
An expression formed by adding constants and numerical multiples of positive whole-number powers of its variable. Its expanded form has no variable in a denominator or root.
Expression
Numbers, variables, and operations that describe a value. An equation sets two expressions equal.
Increasing, decreasing, and constant
Picture a hiking trail seen from the side.
On an interval, whenever a < b: increasing means f(a) < f(b); decreasing means f(a) > f(b); constant means f(a) = f(b). This course reports intervals of behavior with open endpoints. These are comparisons between inputs, not a direction assigned to one point.
Begin at the left of the whole given graph. Read the horizontal-axis label: the input might be x or t.
Mark turning inputs, flat boundaries, and breaks.
Mark actual domain ends. A finite end dot gives a finite boundary; arrows or stated continuation can justify infinity.
Move right within each separate stretch. Name it increasing, decreasing, or constant.
Write open intervals of inputs. Keep pieces on opposite sides of a break separate.
Give each requested behavior on its own line. Say 'and' between stretches; ∪ joins the listed stretches piece by piece.
The graph shows y = f(x), where f(x) = -(x - 2 + 3. The horizontal axis is labeled x. The graph is a parabola that opens downward. Its highest point (turning point) is at (2, 3). It also passes through (0, -1), (1, 2), (3, 2) and (4, -1). Arrows on both ends show that the graph continues forever to the left and to the right, so the domain is all real numbers. State the open interval(s) on which f is increasing, the open interval(s) on which it is decreasing, and any interval on which it is constant.
Increasing on (-∞, 2). Decreasing on (2, ∞). Constant on no interval.
Writing the intervals in y-values, for example 'increasing from −2 to 5' because the heights run from −2 to 5. Intervals of increase and decrease are always inputs (x-values or t-values), read along the horizontal axis.
Find the input axis and actual domain ends.
Split at turns, flat boundaries, and gaps.
Read left to right on each separate piece.
Write open intervals of inputs.
Rate of change
How much an output changes per unit change in the input. Units are output units per input unit, such as miles per hour, dollars per year, or amperes per volt.
Average rate of change
The output change divided by the matching nonzero input change between two inputs. It is the slope of the straight ruler line joining their graph points, regardless of the path between.
Increasing
A function is increasing on an interval when bigger inputs always give bigger outputs there. Its graph climbs as you move from left to right.
Decreasing
A function is decreasing on an interval when bigger inputs always give smaller outputs there. Its graph drops as you move from left to right.
Constant
A function is constant on an interval when its output stays the same for every input there. Its graph is a flat, horizontal piece.
Open interval
A stretch of inputs that excludes its finite endpoints, written with parentheses. In this course, intervals of increase and decrease are reported as open stretches.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Solve
Find every allowed input that makes an equation true.
Horizontal axis
The graph’s left-to-right reference line. It usually shows inputs, such as x or time t.
Domain
The entire set of inputs a function accepts, including any stated restrictions. A chosen averaging interval can be only part of it.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Interval notation
A compact way to name a number-line stretch using its ends, parentheses for exclusions, and square brackets for inclusions.
Endpoint
A boundary of a graph piece or interval. A finite endpoint can be included or excluded. Course local comparisons need inputs on both sides.
Union
Combining sets so a number belongs if it belongs to at least one piece. The symbol is ∪.
Infinity
The symbol ∞ describes continuing without a finite end. It is not a real endpoint that can be included.
Slope
A line’s vertical change divided by the matching horizontal change. It is undefined when the horizontal change is zero.
Rise
The signed vertical change between two points, using the same end-minus-start order as the run.
Run
The signed horizontal change between two points, using the same end-minus-start order as the rise.
Turning point
An interior point where a graph switches from rising to falling or from falling to rising. A flattening point need not turn.
Parabola
The U-shaped graph of a quadratic function, opening upward or downward.
Vertex
The turning point of a parabola, or the corner of a V-shaped absolute-value graph. Its coordinates give both location and height.
Vertical asymptote
A vertical line approached as a graph’s outputs grow without bound near that input. It is not part of the function graph.
Branch
One separate connected piece of a graph. A break can separate pieces that must be read individually.
Per
For each one unit of another quantity. It names the division used in a rate.
Nonnegative
Zero or positive. It includes 0 and excludes every negative real number.
Bound
A height or number that a set of values never passes. A bound need not be attained.
Variable
A letter standing for a number, which can vary or be unknown.
Local maxima and minima
Think of one hill on a roller coaster.
A local maximum at input b has f(b) ≥ f(x) for every x in some open interval around b contained in the domain. A local minimum has f(b) ≤ f(x) there. Its value is f(b); its location is b; its point is (b, f(b)). Equal nearby heights are allowed by these nonstrict inequalities. A strict local extremum uses > or < for every nearby x ≠ b.
Scan the given graph for changes from rising to falling or falling to rising.
Rising then falling identifies an isolated local maximum; falling then rising identifies an isolated local minimum.
Also inspect flat stretches and shoulders when applying the formal nonstrict rule. Compare both sides, including any equal heights.
Require a domain neighborhood on both sides. An end of the graph is considered separately for absolute extrema.
Read the horizontal input as the location and the vertical output as the value.
Give value and location in a full sentence; give the ordered pair if the question asks for the point.
The graph shows f(x) = -(x - 2 + 5, defined for all real numbers. Points read from the graph are (0, 1), (1, 4), (2, 5), (3, 4) and (4, 1). The curve keeps falling to the left of (0, 1) and to the right of (4, 1). Find every local maximum and local minimum of f. Give each value and location in a sentence, and give the point.
f has a local maximum value of 5 at x = 2. The point is (2, 5). f has no local minimum.
Saying 'the maximum is x = 1'. The maximum is the output, 2; x = 1 is where it happens. On the exam write both: 'local maximum of 2 at x = 1'.
Check changes of direction and any level stretches.
Compare close domain points on both sides.
Name maximum or minimum using the correct output comparison.
Read the value and input separately and report both.
Increasing
A function is increasing on an interval when bigger inputs always give bigger outputs there. Its graph climbs as you move from left to right.
Decreasing
A function is decreasing on an interval when bigger inputs always give smaller outputs there. Its graph drops as you move from left to right.
Constant
A function is constant on an interval when its output stays the same for every input there. Its graph is a flat, horizontal piece.
Open interval
A stretch of inputs that excludes its finite endpoints, written with parentheses. In this course, intervals of increase and decrease are reported as open stretches.
Local maximum
An output at least as high as all outputs in some open neighborhood on both sides of an interior input. A strict hilltop beats its neighbors; flat stretches can satisfy the nonstrict definition.
Local minimum
An output at most as high as all outputs in some open neighborhood on both sides of an interior input. A strict valley lies below its neighbors; flat stretches can satisfy the nonstrict definition.
Local extrema
The local maxima and local minima of a function, taken together. A single one is called an extremum. Many books call them relative extrema instead.
Absolute maximum
The greatest output a function reaches anywhere on its entire domain, if such a value exists. It can occur at more than one x.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Ordered pair
Two coordinates written (x, y): the input first and its output second. It names one graph point.
Horizontal axis
The graph’s left-to-right reference line. It usually shows inputs, such as x or time t.
Vertical axis
The graph’s up-and-down reference line. It usually measures outputs, such as y or distance.
Domain
The entire set of inputs a function accepts, including any stated restrictions. A chosen averaging interval can be only part of it.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Endpoint
A boundary of a graph piece or interval. A finite endpoint can be included or excluded. Course local comparisons need inputs on both sides.
Slope
A line’s vertical change divided by the matching horizontal change. It is undefined when the horizontal change is zero.
Rise
The signed vertical change between two points, using the same end-minus-start order as the run.
Turning point
An interior point where a graph switches from rising to falling or from falling to rising. A flattening point need not turn.
Relative maximum
Another name for a Local maximum: an output that beats or ties all outputs in a two-sided neighborhood of an interior input.
Relative minimum
Another name for a Local minimum: an output below or equal to all outputs in a two-sided neighborhood of an interior input.
Local maxima
The plural of Local maximum. A function can have several locally highest output values, each compared with nearby inputs.
Extremum
One maximum or minimum value. State whether it is local or absolute, and give where it occurs.
Extrema
The plural of Extremum: maximum and minimum values considered together. They can be local or absolute.
Strict local maximum
An output greater than every other output in some two-sided neighborhood of an interior input. It does not tie nearby outputs.
Strict local minimum
An output less than every other output in some two-sided neighborhood of an interior input. It does not tie nearby outputs.
Neighborhood
A small open interval around an input, containing nearby allowed inputs on both sides. Local extrema compare outputs inside one such interval.
Parabola
The U-shaped graph of a quadratic function, opening upward or downward.
Vertex
The turning point of a parabola, or the corner of a V-shaped absolute-value graph. Its coordinates give both location and height.
Branch
One separate connected piece of a graph. A break can separate pieces that must be read individually.
Integer
A whole number or the negative of a whole number. Fractions between whole numbers are not integers.
Per
For each one unit of another quantity. It names the division used in a rate.
Constant function
A function returning one fixed output c for every allowed input. c names one chosen number.
Absolute extrema
The greatest and least attained output values on the entire domain, if they exist. One value can occur at several inputs.
Coefficient
The numerical multiplier of a term, including its sign.
Toolkit behavior, then absolute maximum and minimum
Think of a toolkit as the basic shapes you keep in a drawer.
The absolute maximum is f(c) when c is in the domain and f(c) ≥ f(x) for every domain input x. The absolute minimum is f(d) when d is in the domain and f(d) ≤ f(x) for every domain input x. The value must be attained, meaning reached at an accepted input.
Review the nine toolkit shapes and their domain restrictions before using the summary table.
Look at the whole stated domain, including included endpoint dots and any arrows or stated continuation.
If outputs rise without bound, there is no absolute maximum; if they fall without bound, there is no absolute minimum.
A height approached but never reached is not an absolute extremum. Check excluded hollow dots and unattained levels.
Compare the remaining reached heights with every domain piece. Find the greatest and least reached outputs and every input producing each.
Answer with the value and location on separate lines. A viewing-window edge does not establish a domain endpoint.
Find the absolute maximum and absolute minimum of f(x) = 4 − on its whole real-number domain, if they exist.
Absolute maximum: 4 at x = 0.
Absolute minimum: none.
Calling the highest point visible in a picture the absolute maximum when an arrow shows the graph keeps rising beyond the window. Check how the graph behaves at its ends before you name an absolute maximum or minimum.
Identify the exact domain and its included or excluded endpoints.
Check every branch for outputs without an upper or lower bound.
Check whether a proposed record height is actually reached.
Compare all reached candidate heights, including included endpoints.
List every input that reaches each absolute value.
Increasing
A function is increasing on an interval when bigger inputs always give bigger outputs there. Its graph climbs as you move from left to right.
Decreasing
A function is decreasing on an interval when bigger inputs always give smaller outputs there. Its graph drops as you move from left to right.
Constant
A function is constant on an interval when its output stays the same for every input there. Its graph is a flat, horizontal piece.
Local maximum
An output at least as high as all outputs in some open neighborhood on both sides of an interior input. A strict hilltop beats its neighbors; flat stretches can satisfy the nonstrict definition.
Local minimum
An output at most as high as all outputs in some open neighborhood on both sides of an interior input. A strict valley lies below its neighbors; flat stretches can satisfy the nonstrict definition.
Local extrema
The local maxima and local minima of a function, taken together. A single one is called an extremum. Many books call them relative extrema instead.
Absolute maximum
The greatest output a function reaches anywhere on its entire domain, if such a value exists. It can occur at more than one x.
Absolute minimum
The least output a function reaches anywhere on its entire domain, if such a value exists. It can occur at more than one x.
Toolkit functions
The nine basic functions whose graphs you should recognize on sight: constant, identity, absolute value, quadratic, cubic, reciprocal, reciprocal squared, square root, and cube root.
Input
The value you feed into a function. On its graph, it is the horizontal coordinate.
Output
The value a function returns for an allowed input. On its graph, it is the vertical coordinate.
Function
A rule that assigns exactly one output to each allowed input.
Evaluate
Find an output by substituting an allowed input into every variable position and following the operations.
Solve
Find every allowed input that makes an equation true.
Horizontal axis
The graph’s left-to-right reference line. It usually shows inputs, such as x or time t.
Domain
The entire set of inputs a function accepts, including any stated restrictions. A chosen averaging interval can be only part of it.
Range
The set of output values the function actually reaches. A nearby height or a limiting height need not belong to it.
Interval
A stretch of real numbers between boundaries. It may include or exclude a finite endpoint and may continue without bound.
Closed interval
A finite interval that includes both endpoints, written with square brackets.
Endpoint
A boundary of a graph piece or interval. A finite endpoint can be included or excluded. Course local comparisons need inputs on both sides.
Hollow dot
An unfilled marker showing that a displayed endpoint or point is excluded from the graph or set.
Filled dot
A solid marker showing that the displayed point or endpoint is included.
Slope
A line’s vertical change divided by the matching horizontal change. It is undefined when the horizontal change is zero.
Rise
The signed vertical change between two points, using the same end-minus-start order as the run.
Difference
The result of subtraction, retaining its sign. In a rate it measures an end value minus a start value.
Turning point
An interior point where a graph switches from rising to falling or from falling to rising. A flattening point need not turn.
Extremum
One maximum or minimum value. State whether it is local or absolute, and give where it occurs.
Extrema
The plural of Extremum: maximum and minimum values considered together. They can be local or absolute.
Neighborhood
A small open interval around an input, containing nearby allowed inputs on both sides. Local extrema compare outputs inside one such interval.
Attain
Actually reach a value at an allowed input. Approaching a height forever or drawing a hollow dot there does not attain it.
Parabola
The U-shaped graph of a quadratic function, opening upward or downward.
Vertex
The turning point of a parabola, or the corner of a V-shaped absolute-value graph. Its coordinates give both location and height.
Numerator
The top of a fraction. It counts how many equal pieces are being represented.
Denominator
The bottom of a fraction. It names the equal-piece size and must be nonzero.
Reciprocal
The multiplicative inverse of a nonzero number. A nonzero fraction’s reciprocal swaps its numerator and denominator.
Factor
One of the quantities being multiplied in a product. A factor can cancel only when it multiplies an entire numerator or denominator.
Term
A piece of an expression separated from other pieces by plus or minus signs. Its sign belongs with it.
Square root
The nonnegative number whose square is the number inside . A real square root requires a nonnegative inside.
Cube root
The real number whose cube is the input. Negative inputs have negative cube roots.
Branch
One separate connected piece of a graph. A break can separate pieces that must be read individually.
Identity function
The toolkit function f(x) = x. It returns the input unchanged and increases on all real inputs.
Absolute value
A number’s distance from 0, always nonnegative. The bars |x| measure distance and do not mean an absolute maximum or minimum.
Quadratic function
A polynomial function of degree 2. Its graph is a parabola; is the basic toolkit example.
Cubic function
A polynomial function of degree 3. The basic toolkit example rises on all real inputs.
Reciprocal function
The toolkit function f(x) = , defined for x ≠ 0. It decreases on each separate side of 0.
Per
For each one unit of another quantity. It names the division used in a rate.
Nonnegative
Zero or positive. It includes 0 and excludes every negative real number.
Bound
A height or number that a set of values never passes. A bound need not be attained.
Decreasing function
A function whose outputs strictly fall whenever its inputs rise within the interval being discussed. Read each separated branch on its own.
Constant function
A function returning one fixed output c for every allowed input. c names one chosen number.
Absolute value function
The toolkit function f(x) = |x|. It returns the distance of x from 0, falls toward 0, and then rises.
Square root function
The toolkit function f(x) = , with domain [0, ∞). It rises from its included endpoint and has absolute minimum 0.
Cube root function
The toolkit function f(x) = . It accepts every real input and increases throughout its domain.
Absolute extrema
The greatest and least attained output values on the entire domain, if they exist. One value can occur at several inputs.