Power functions and polynomial functions — quick review
Power functions
The big picture. Learn to recognize and graph a power function, f(x) = k.
A power function is f(x) = k, where k is a fixed number other than 0 and p is a fixed number. The graph families below use whole-number powers p (0, 1, 2, 3, ...). Polynomial vocabulary later compares these with negative and fractional powers.
For a whole-number p: if p is even, f(−x) = f(x): the inputs x and −x give the same output, and the graph mirrors across the y-axis. If p is odd, f(−x) = −f(x): x and −x give opposite outputs, and the graph looks the same after a half turn around (0, 0).
For f(x) = 2, match the power-function form f(x) = k: k = 2 is the number in front and p = 3 is the power. The 2 multiplies ; it is not part of the power.
Use the odd-power rule: p = 3 is odd, so opposite inputs give opposite outputs. Start from the shape of y = , because cubing a negative input keeps its minus sign.
Use substitution and the order of operations to make the table. Cube each input before multiplying by 2: f(−2) = 2(−8) = −16, f(−1) = 2(−1) = −2, f(0) = 0, f(1) = 2 and f(2) = 16.
Plot (−2, −16), (−1, −2), (0, 0), (1, 2) and (2, 16) and join them smoothly in the shape of y = . Each output is 2 times the output of at the same input, so the graph is y = stretched to twice the height.
Check with the odd-power rule: the outputs at −2 and 2 are −16 and 16, and those at −1 and 1 are −2 and 2. Each pair is opposite. Also f(1) = 2 equals k, because 1 to any power is 1.
Tidy the formula: multiply out parentheses, (2x = 8; combine copies of x, 3 · = 3x⁵; and write dividing by a number as multiplying by a fraction, = . Tidy only in ways that keep the function defined for every real x.
Check that it is a single piece: no plus or minus sign joins two pieces.
For the whole-number graph families here, x must be the base of a fixed whole-number power. A negative or fractional power can be a power function too; its graph needs a different rule.
Read k, the number in front, and p, the power on x.
Sort by p: an even p means the family and an odd p the family, with p = 1 giving a straight line and p = 0 a flat line.
Check k by putting in x = 1: the output must be k.
For f(x) = x⁴, find f(−3) and f(3). (The inputs are −3 and 3; find each output.)
f(−3) = 81
f(3) = 81
Letting the power grab the number in front. In f(x) = −3 the power 2 belongs to x alone. At x = 2, square first, = 4, then multiply by −3 to get −12. Squaring −3 · 2 = −6 gives 36, which is the output of a different function, (−3x. Put the input in, do the power, and only then multiply by k.
power function
One fixed nonzero number times x raised to a fixed power, with nothing added: f(x) = k. The power can be whole, negative or fractional.
polynomial
A function built by adding or subtracting pieces, each a number times x to a whole-number power. Simplified without changing where it is defined, it has no x in the bottom of a fraction, under a root, or up in an exponent.
coefficient
The number multiplying the x part of a term, sign included. In −5 the coefficient is −5. When no number is written, it is 1, so has coefficient 1.
End behavior of a power function
The big picture. Predict both ends of a power function f(x) = k when p is a positive whole number.
For f(x) = k with p = 1, 2, 3, ... and k ≠ 0:
Right arm: k > 0 gives f(x) → ∞ as x → ∞; k < 0 gives f(x) → −∞ as x → ∞.
Left arm: if p is even it matches the right arm; if p is odd it points the opposite way.
For f(x) = −2, match f(x) = k: k = −2 and p = 5. The end-behavior rule applies because p is a positive whole number and k is not 0.
Apply the right-arm rule first. k = −2 is negative, so as x → ∞, f(x) → −∞. The reason: a large positive input has a large positive fifth power, and multiplying by −2 makes it negative.
Apply the left-arm rule. p = 5 is odd, so the left arm points the opposite way from the right arm: as x → −∞, f(x) → ∞. The reason: a large negative input has a large negative fifth power, and multiplying by −2 makes it positive.
Write the answer in arrow notation, one line for each direction of x. In arrow notation, x → ∞ means the input moves far to the right without stopping, and f(x) → −∞ means the outputs drop without stopping. So: as x → −∞, f(x) → ∞ (left arm up), and as x → ∞, f(x) → −∞ (right arm down).
Check by substitution: f(10) = −2 · 100,000 = −200,000 and f(−10) = −2 · (−100,000) = 200,000. Their signs agree with the two end rules. These values check the arithmetic; the rules describe what happens as inputs grow without bound.
Rewrite the function as one number times one power of x, and name k and p.
Use the sign of k to set the right arm: positive is up, negative is down.
Use p to set the left arm: even copies the right arm, odd does the opposite.
Write one line for x → −∞ and one line for x → ∞.
Test x = 10 and x = −10 and compare the signs of the outputs with your arms.
Describe the end behavior of f(x) = 3.
As x → −∞, f(x) → ∞.
As x → ∞, f(x) → ∞.
Both arms up.
Reading − as (−x. The power touches only x. The minus sign in front is k = −1 and is applied last. So − has both arms down, while (−x = has both arms up. Before deciding anything, write k out with its sign: k = −1, k = −2, and so on.
power function
One fixed nonzero number times x raised to a fixed power, with nothing added: f(x) = k. The power can be whole, negative or fractional.
end behavior
What a graph does far to the left and far to the right. For a polynomial of degree 1 or more, each arm heads up forever or down forever.
Polynomial vocabulary
The big picture. Learn to identify a polynomial and name its parts.
A polynomial is a sum of terms a·: each coefficient a is a real number and each power n is a whole number (0, 1, 2, 3, ...). Standard form lists the powers from highest to lowest: f(x) = + ... + + x + , with ≠ 0; every polynomial except 0 itself can be written this way. The degree is n, the highest power. The leading term is . The leading coefficient is . The constant term is . The zero polynomial, 0, has no degree and no leading term.
For g(x) = 4 − 9 + 3 − x, apply the polynomial definition. The powers of x are 2, 0, 5 and 1, all whole numbers, and each coefficient is real, so g is a polynomial. No brackets need multiplying out, and no two terms share a power of x, so nothing needs combining.
Use the term and coefficient definitions. Keep each minus sign with its term: 4, −9, 3, −x have coefficients 4, −9, 3, −1. The term −x means −1 times x, and the constant −9 has power 0.
Use the degree rule to choose the highest power with a nonzero coefficient: 5. Its term 3 is the leading term, and 3 is the leading coefficient. Position in the written formula does not determine the degree.
Use standard form to reorder the terms from highest power to lowest: g(x) = 3 + 4 − x − 9. Addition allows this rearrangement when each term keeps its sign.
Check the rearrangement term by term: the same four signed terms occur once each. Then substitute x = 2 into both orders: 4(2 − 9 + 3(2 − 2 = 16 − 9 + 96 − 2 = 101 and 3(2 + 4(2 − 2 − 9 = 96 + 16 − 2 − 9 = 101. Matching outputs support the check; keeping every signed term is what makes the two forms equal.
For g(x) = 4 − 9 + 3 − x, list the terms and their coefficients, then give the degree, the leading term and the leading coefficient, and write g in standard form. In plain words: break the formula into the pieces being added, find the piece with the highest power of x, and put the pieces in order from highest power to lowest.
Terms: 4, −9, 3, −x
Coefficients: 4, −9, 3, −1
Degree: 5
Leading term: 3
Leading coefficient: 3
Standard form: g(x) = 3 + 4 − x − 9
The most common mistake is to take the first term on the page as the leading term, or to take the biggest number as the leading coefficient. In 5 + 2x − 3 the leading term is −3, not 5, and the leading coefficient is −3, sign included. Always find the highest power first. The order on the page and the size of the numbers decide nothing.
Make sure it is a polynomial: only whole-number powers of x, after any simplifying that keeps it defined for every real x.
Get it into expanded form: multiply out any brackets, then combine like terms.
Circle each term together with its sign.
Under each term write its coefficient and its power. Fill in the invisible 1, the power 1 on a bare x and the power 0 on a constant.
Find the largest power with a coefficient other than 0. Name the degree, the leading term and the leading coefficient from that one term. The zero polynomial has none of the three.
Write the terms from the highest power to the lowest. That is standard form, and the leading term now stands first.
Check by putting x = 2 into the starting formula and into your standard form. The outputs must match.
power function
One fixed nonzero number times x raised to a fixed power, with nothing added: f(x) = k. The power can be whole, negative or fractional.
polynomial
A function built by adding or subtracting pieces, each a number times x to a whole-number power. Simplified without changing where it is defined, it has no x in the bottom of a fraction, under a root, or up in an exponent.
term
One piece of a polynomial, cut off from the others at each plus or minus sign. The sign in front stays with its piece.
coefficient
The number multiplying the x part of a term, sign included. In −5 the coefficient is −5. When no number is written, it is 1, so has coefficient 1.
degree
The highest power of x in a polynomial once it is multiplied out and like terms are combined, counting only terms whose coefficient is not 0. The zero polynomial has no degree. It is not the number of terms, nor the biggest coefficient. A plain number counts as power 0.
leading term
The term with the highest power of x, sign and coefficient included. It need not be written first. When x is far from 0, it outweighs all the other terms.
leading coefficient
The coefficient of the leading term, its sign included. Together with the degree, it decides where the graph's two ends point. In 3 + 2x − 7x⁴ it is −7.
End behavior of a polynomial comes from its leading term
The big picture. Predict a polynomial’s far-left and far-right directions without drawing the whole graph.
If f(x) = + (terms with lower powers of x), where ≠ 0 is the leading coefficient and the degree n is 1 or more, then f has the same end behavior as the power function y = .
n even, > 0: as x → −∞, f(x) → ∞, and as x → ∞, f(x) → ∞ (both arms up).
n even, < 0: as x → −∞, f(x) → −∞, and as x → ∞, f(x) → −∞ (both arms down).
n odd, > 0: as x → −∞, f(x) → −∞, and as x → ∞, f(x) → ∞ (left arm down, right arm up).
n odd, < 0: as x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞ (left arm up, right arm down).
For f(x) = 50 − + 100, use the degree rule to find the highest power, 3. The leading term is − and its coefficient is −1, even though it is written in the middle.
Apply the leading-term rule for end behavior. Use − to predict the two ends, because the lower-power terms become small compared with it far enough from zero. Keep those terms when calculating actual outputs.
Apply the power-function rules to −. The negative coefficient sends the right end down: as x → ∞, f(x) → −∞. The odd degree makes the left end opposite: as x → −∞, f(x) → ∞.
Check by substituting into the whole polynomial: f(100) = 500,000 − 1,000,000 + 100 = −499,900, and f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100. The signs match the predicted ends. Here the leading term outweighs the other terms together; f(10) = 4,100 shows why a small input can mislead.
Say what is asked: where does the graph go far to the right (x → ∞) and far to the left (x → −∞)?
Find the leading term, the term with the highest power of x. If the polynomial is a product of brackets, multiply the highest-power piece of each bracket to get it.
Read the leading coefficient, including a hidden 1 or −1, and read the degree. If the degree is 0, the polynomial is a constant c and both ends stay at height c: stop there.
Sign of the leading coefficient gives the right arm: positive up, negative down.
Even degree: the left arm matches the right arm. Odd degree: the left arm is the opposite.
Write the two arrow statements.
Check by putting 100 and −100 (or 10 and −10 when the coefficients are small) into the whole polynomial and looking at the signs; they agree with the arms wherever the leading term outweighs all the other terms together.
Find the end behavior of f(x) = 50 − + 100. In plain words: say where the graph goes far to the right and far to the left.
As x → −∞, f(x) → ∞ (left arm up).
As x → ∞, f(x) → −∞ (right arm down).
Taking the first term on the page as the leading term. In f(x) = 6 + 2x − the first term is 6, but the leading term is −, the one with the highest power. Before reading any sign, scan every term for its power of x and circle the highest one. Then read the sign directly in front of that term, including a bare minus sign, which means −1.
power function
One fixed nonzero number times x raised to a fixed power, with nothing added: f(x) = k. The power can be whole, negative or fractional.
polynomial
A function built by adding or subtracting pieces, each a number times x to a whole-number power. Simplified without changing where it is defined, it has no x in the bottom of a fraction, under a root, or up in an exponent.
term
One piece of a polynomial, cut off from the others at each plus or minus sign. The sign in front stays with its piece.
coefficient
The number multiplying the x part of a term, sign included. In −5 the coefficient is −5. When no number is written, it is 1, so has coefficient 1.
degree
The highest power of x in a polynomial once it is multiplied out and like terms are combined, counting only terms whose coefficient is not 0. The zero polynomial has no degree. It is not the number of terms, nor the biggest coefficient. A plain number counts as power 0.
leading term
The term with the highest power of x, sign and coefficient included. It need not be written first. When x is far from 0, it outweighs all the other terms.
leading coefficient
The coefficient of the leading term, its sign included. Together with the degree, it decides where the graph's two ends point. In 3 + 2x − 7x⁴ it is −7.
end behavior
What a graph does far to the left and far to the right. For a polynomial of degree 1 or more, each arm heads up forever or down forever.
Intercepts of a polynomial
The big picture. Find where a polynomial graph meets each axis.
y-intercept: the point (0, f(0)). When the polynomial is written term by term, f(0) is the constant term, the term with no x. x-intercepts: the points (c, 0) for every real number c with f(c) = 0. Zero product property: if A · B = 0, then A = 0 or B = 0.
For f(x) = 2 − 4x − 30, use the y-intercept rule: set x = 0 because every point on the y-axis has that input. f(0) = −30, so the y-intercept is (0, −30).
Use the x-intercept rule: set the output to zero because every point on the x-axis has height zero. Solve 2 − 4x − 30 = 0. Pull out the common factor 2 to get 2( − 2x − 15) = 0; distributing 2 gives back all three terms.
Factor − 2x − 15: look for two numbers whose product is −15, the number with no x, and whose sum is −2, the number in front of x. They are 3 and −5, so − 2x − 15 = (x + 3)(x − 5). Multiplying out checks it: − 5x + 3x − 15 = − 2x − 15.
Apply the zero product property to 2(x + 3)(x − 5) = 0. The factor 2 cannot be zero, so solve x + 3 = 0 or x − 5 = 0. This gives x = −3 or x = 5. Use the x-intercept rule to write (−3, 0) and (5, 0).
Check each input in the original formula: f(−3) = 18 + 12 − 30 = 0 and f(5) = 50 − 20 − 30 = 0. Both points have the required height zero. Check the y-intercept with the factored form too: 2(0 + 3)(0 − 5) = −30.
Find the y-intercept and the x-intercepts of f(x) = 2 − 4x − 30.
y-intercept: (0, −30)
x-intercepts: (−3, 0) and (5, 0)
The most common mistake is reading the number inside a bracket with its sign unchanged. The factor (x + 3) does not give an intercept at 3. It gives −3, because −3 is the value that makes x + 3 equal 0. To avoid it, write the small equation x + 3 = 0 every time, solve it, and plug the answer back in. If the output is not 0, the sign is wrong.
y-intercept: put 0 in for every x and compute. Write the point (0, f(0)).
x-intercepts: write f(x) = 0, with 0 alone on one side.
Pull out anything every term shares: a number, a power of x, or both.
Factor what is left: a square minus a square, or three terms by the multiply and add search.
Set each factor that contains x equal to 0 and solve. Skip any factor that can never be 0.
Write each answer as a point (c, 0), then plug each one back into the original formula.
polynomial
A function built by adding or subtracting pieces, each a number times x to a whole-number power. Simplified without changing where it is defined, it has no x in the bottom of a fraction, under a root, or up in an exponent.
term
One piece of a polynomial, cut off from the others at each plus or minus sign. The sign in front stays with its piece.
coefficient
The number multiplying the x part of a term, sign included. In −5 the coefficient is −5. When no number is written, it is 1, so has coefficient 1.
degree
The highest power of x in a polynomial once it is multiplied out and like terms are combined, counting only terms whose coefficient is not 0. The zero polynomial has no degree. It is not the number of terms, nor the biggest coefficient. A plain number counts as power 0.
leading term
The term with the highest power of x, sign and coefficient included. It need not be written first. When x is far from 0, it outweighs all the other terms.
leading coefficient
The coefficient of the leading term, its sign included. Together with the degree, it decides where the graph's two ends point. In 3 + 2x − 7x⁴ it is −7.
end behavior
What a graph does far to the left and far to the right. For a polynomial of degree 1 or more, each arm heads up forever or down forever.
Turning points
The big picture. Use a graph’s changes of direction to put a lower bound on its degree.
A turning point is a point where the graph changes from rising to falling (a peak) or from falling to rising (a valley), read left to right.
A polynomial of degree n, where n is 1 or more, has at most n − 1 turning points.
Backward: a polynomial that is not constant and whose graph has t turning points has degree at least t + 1.
Use the turning-point definition on the graph described in the example. Read left to right: falling changes to rising at (−2, −13), rising changes to falling at (0, 3), and falling changes to rising at (2, −13). Count these direction changes, not the ends or a flat spot that keeps rising.
Count t = 3 turns. Apply the bound t ≤ n − 1: 3 ≤ n − 1 gives n ≥ 4 after adding 1 to both sides. This is a lower bound, because a degree can allow more turns than a graph actually has.
Use the end-behavior rule from the earlier lesson. Both ends point up, so the degree is even and the leading coefficient is positive. The smallest even degree allowed by the turn count is 4.
Check that degree 4 can fit the stated shape with the example’s formula f(x) = − 8 + 3. Its degree is 4 and its leading coefficient 1 is positive, so it allows at most 3 turns and both arms point up. Multiplying out ( − 4 − 13 gives − 8 + 16 − 13 = − 8 + 3, so f(x) = ( − 4 − 13. A square is never negative and is 0 only where − 4 = 0, at x = −2 and x = 2, so the lowest outputs are −13 there. Between them, − 4 runs from 0 down to −4 at x = 0 and back to 0, so its square climbs from 0 to 16 and falls back: the graph rises to (0, 3) and falls again. Outside −2 and 2 the square only grows, so both arms rise.
Finish the check by substitution: f(−2) = 16 − 32 + 3 = −13, f(0) = 3 and f(2) = 16 − 32 + 3 = −13. This degree-4 polynomial has the three stated turns and both arms up, so degree 4 is possible as well as being the lower bound.
Trace the graph left to right with a finger or a pencil tip.
Mark every peak (rising, then falling) and every valley (falling, then rising).
Count the marks. Call the count t.
Add 1 to t for a lower bound. Check the whole graph before naming the least degree: curvature or a level crossing can rule out a line.
Use the end behavior to check the degree parity. If the question gives only turns and end directions, report the least degree those clues allow.
Read the right arm: up means a positive leading coefficient, down means a negative one.
A polynomial f has this graph, read left to right: it comes down from the upper left to a valley at (−2, −13), climbs to a peak at (0, 3), drops to a valley at (2, −13), and then climbs to the upper right forever. The table lists seven points on the graph. How many turning points does the graph have? What is the least possible degree of f? Is the leading coefficient positive or negative?
Turning points: 3, at (−2, −13), (0, 3) and (2, −13).
Least possible degree: 4 (the degree is even and at least 4).
Leading coefficient: positive.
Reading 'at most' as 'exactly'. A degree 3 polynomial does not have to have 2 turning points: y = has none. A graph with 3 turning points does not have to come from degree 4: it could come from degree 6. Going from a formula of degree 1 or more, say 'at most n − 1 turning points'. Going from a graph that is not a flat line, say 'degree at least t + 1'.
polynomial
A function built by adding or subtracting pieces, each a number times x to a whole-number power. Simplified without changing where it is defined, it has no x in the bottom of a fraction, under a root, or up in an exponent.
term
One piece of a polynomial, cut off from the others at each plus or minus sign. The sign in front stays with its piece.
coefficient
The number multiplying the x part of a term, sign included. In −5 the coefficient is −5. When no number is written, it is 1, so has coefficient 1.
degree
The highest power of x in a polynomial once it is multiplied out and like terms are combined, counting only terms whose coefficient is not 0. The zero polynomial has no degree. It is not the number of terms, nor the biggest coefficient. A plain number counts as power 0.
leading term
The term with the highest power of x, sign and coefficient included. It need not be written first. When x is far from 0, it outweighs all the other terms.
leading coefficient
The coefficient of the leading term, its sign included. Together with the degree, it decides where the graph's two ends point. In 3 + 2x − 7x⁴ it is −7.
end behavior
What a graph does far to the left and far to the right. For a polynomial of degree 1 or more, each arm heads up forever or down forever.
turning point
A spot where the graph, read left to right, switches between rising and falling: a hilltop or a valley floor. A polynomial of degree n, n at least 1, has at most n − 1.