Quarry School

Graphs of linear functions — quick review

Draw a line by plotting points

In plain words

Picture a city map.

Rule

Rule: Graph a linear function by plotting at least two distinct coordinate pairs (x, f(x)) and drawing the entire straight line through them. A third point checks the arithmetic.

Step

  1. 1. Choose input values. If the slope contains a fraction, try multiples of its denominator. Multiples are results of multiplying by whole numbers: for a denominator of 3, use 0 × 3 = 0, 1 × 3 = 3 and 2 × 3 = 6.

  2. 2. Substitute each input into the function to find its output.

  3. 3. Record the pairs in a values picture, then plot each input across and output up.

  4. 4. Draw a straight line through the points and extend it both ways.

  5. 5. If a third point misses the line, recalculate before drawing.

Strategy

  1. Choose convenient inputs.

  2. Compute one output per input using multiplication before addition.

  3. Plot at least two distinct points and check a third.

  4. Extend the straight line through the points.

Question

Graph the linear function f(x) = −35x + 5 by plotting points. Choose three inputs, find their outputs, record the coordinate pairs in a values picture, plot them, and draw the line. Use the third point to check the arithmetic before drawing.

Answer

The graph is the straight line through (0, 5), (5, 2) and (10, −1), extended in both directions. It crosses the y-axis at (0, 5) and falls 3 units for every 5 units to the right.

Trap

Plotting (3, 3) as output first can hide the mistake because both numbers match. Practice with (0, 5): across 0, then up 5. The input always comes first.

Term

linear function

Definition

A rule of the form f(x) = mx + b, with fixed numbers m and b. Its graph is a straight nonvertical line, and equal input changes give equal output changes.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

coordinate pair

Definition

An address written (x, y). The first number tells your horizontal position and the second tells your vertical position. On a function's graph, they are input and output.

Term

x-axis

Definition

The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.

Term

y-axis

Definition

The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

function

Definition

A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.

Term

coefficient

Definition

The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

Term

denominator

Definition

The bottom number of a fraction. It specifies the equal parts in a whole, or the divisor. A denominator cannot be zero in a defined fraction.

Term

fraction

Definition

One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

Term

order of operations

Definition

The agreed calculation order: grouping, powers, multiplication and division, then addition and subtraction. Within equal-priority operations, work left to right. A power repeats multiplication.

Term

term

Definition

One piece being added or subtracted in an expression.

Term

constant

Definition

A fixed number. A constant term has no changing variable attached.

Start at the y-intercept and walk the slope

In plain words

Picture walking along a ramp drawn on a map.

Rule

Rule: In y = mx + b, the y-intercept is (0, b) and m = riserun = y2−y1x2−x1, with x2 ≠ x1.

Step

  1. 1. Read b, then substitute 0 to verify the point (0, b).

  2. 2. Read m. Write a whole-number slope over 1.

  3. 3. Choose signed rise and run whose quotient is m.

  4. 4. Start at (0, b), move by that run and rise, and repeat.

  5. 5. Draw the line through the points. Check one point by substitution.

Strategy

  1. Identify the y-intercept (0, b).

  2. Turn m into a signed rise divided by a signed run.

  3. Walk that change at least twice.

  4. Check the plotted outputs in the original equation.

Question

Graph the line y = −32x + 6 by starting at its y-intercept and walking the slope. State the y-intercept, give a signed rise and run that match the slope, find two more points to the right of the y-axis and one point to the left of it, then draw the line and check one of your points by substitution.

Answer

The y-intercept is (0, 6). With rise −3 and run 2, the walk lands on (2, 3) and (4, 0); with rise 3 and run −2 it lands on (−2, 9). The graph is the straight line through these points. It falls 3 units for every 2 units to the right and crosses the x-axis at (4, 0).

Trap

Reading −23 as down 3 and right 2. The top is rise, the bottom is run. Write the two movements beside the fraction before plotting.

Term

linear function

Definition

A rule of the form f(x) = mx + b, with fixed numbers m and b. Its graph is a straight nonvertical line, and equal input changes give equal output changes.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

x-axis

Definition

The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.

Term

y-axis

Definition

The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.

Term

y-intercept

Definition

Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).

Term

initial value

Definition

The output when the input is 0. In a linear function f(x) = mx + b, it is b. It describes the amount present before input-dependent change begins.

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

rate of change

Definition

How much an output changes for each unit of input change. For a linear function it is constant and equals the slope. Its units are output units per input unit.

Term

rise

Definition

The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

Term

run

Definition

The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

Term

function

Definition

A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.

Term

domain

Definition

The collection of allowed inputs for a function. A formula may accept every real input while a practical situation permits only meaningful quantities.

Term

coefficient

Definition

The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

Term

fraction

Definition

One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

Term

ratio

Definition

A comparison made by division. Slope compares vertical change with horizontal change as the ratio rise divided by run.

Term

equation

Definition

A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

Term

vertical displacement

Definition

The signed change in vertical position. Between graph points it is the rise, y2 − y1. Going down produces a negative displacement.

Term

horizontal displacement

Definition

The signed change in horizontal position. Between graph points it is the run, x2 − x1. Going left produces a negative displacement.

Term

product

Definition

The answer to multiplication.

Term

term

Definition

One piece being added or subtracted in an expression.

Term

quotient

Definition

The answer to division.

Term

constant

Definition

A fixed number. A constant term has no changing variable attached.

Build a line by changing the identity function

In plain words

Picture a flexible drawing of a ramp.

Rule

Rule: To transform y = x into y = mx + b, multiply outputs by m, including a reflection if m < 0, then shift outputs by b. Stretch if |m| > 1; compress if 0 < |m| < 1.

Step

  1. 1. Sketch the identity function y = x using (0, 0) and (1, 1).

  2. 2. Read |m|, the size of m without its sign, to decide whether heights stretch or compress.

  3. 3. If m < 0, reflect the heights across the x-axis as part of that multiplication.

  4. 4. Add b to every new height. Positive b moves up; negative b moves down.

  5. 5. Verify a point in the final formula. Multiplication must occur before this stated shift.

Question

You need to transform y = x into y = 2x and show what happens to a point.

Answer

y = 2x.
The point (3, 3) becomes (3, 6).
The point (−3, −3) becomes (−3, −6).

Strategy

  1. Choose the stated positive factor greater than 1.

  2. Multiply each point's output by that factor, leaving its input fixed.

  3. Check a transformed point in the resulting formula.

Strategy

  1. Choose the stated positive factor between 0 and 1.

  2. Multiply each output by that factor without changing its input.

  3. Check that nonzero output distances from 0 are smaller, then substitute into the new formula.

Strategy

  1. Keep each input coordinate.

  2. Multiply each output by −1.

  3. Plot two changed points and check them in y = −f(x).

Strategy

  1. Keep each input.

  2. Add the stated signed shift to every output.

  3. Plot two moved points and substitute their inputs into f(x) + b.

Strategy

  1. Write the input as x − h and identify h, including its sign.

  2. Move an old point (u, v) to (u + h, v). The letter u names its old input and v its old output.

  3. Substitute the new input u + h into f(x − h), which sends it back to old input u.

Strategy

  1. Start with y = x.

  2. Multiply its heights by m, interpreting size and sign separately.

  3. Add b to the new heights.

  4. Substitute one input in the final formula and compare.

Trap

Doing the stated downward shift first and then halving the heights. That produces 12(x − 3) = 12x − 32, a different line.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

x-axis

Definition

The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.

Term

y-axis

Definition

The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.

Term

origin

Definition

The point (0, 0), where the x-axis and y-axis meet. It is the starting address for measuring horizontal and vertical positions.

Term

y-intercept

Definition

Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

rise

Definition

The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

Term

run

Definition

The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

Term

identity function

Definition

The function f(x) = x, whose output equals its input. Its graph passes through the origin and has slope 1.

Term

transformation

Definition

A change to a graph made by changing its rule. Shifts move it, reflections flip it, and stretches or compressions change how far points sit from an axis.

Term

vertical stretch

Definition

Multiplying every output by a positive factor greater than 1. Points move farther from the x-axis, while their inputs stay fixed. For y = x, the resulting line is steeper.

Term

vertical compression

Definition

Multiplying every output by a positive factor between 0 and 1. Points move closer to the x-axis, while their inputs stay fixed. For y = x, the resulting line is flatter.

Term

vertical reflection

Definition

Multiplying every output by −1. Each point keeps its input but reverses its height, so the graph flips across the x-axis.

Term

vertical shift

Definition

Adding the same number to every output. A positive addition moves a graph up; a negative addition moves it down. For a line, its slope stays the same.

Term

absolute value

Definition

A number's distance from 0, so it is never negative. For a slope, its absolute value measures steepness without recording whether the line rises or falls.

Term

function

Definition

A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.

Term

coefficient

Definition

The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

Term

fraction

Definition

One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

Term

order of operations

Definition

The agreed calculation order: grouping, powers, multiplication and division, then addition and subtraction. Within equal-priority operations, work left to right. A power repeats multiplication.

Term

horizontal shift

Definition

Moving a graph left or right without changing its shape. The rule g(x) = f(x − h) moves points right h when h is positive.

Term

equation

Definition

A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

Term

factor

Definition

One of the numbers multiplied to make a product. A whole-number factor of a positive whole number divides it with nothing left over.

Term

product

Definition

The answer to multiplication.

Read a graph and write its equation

In plain words

Picture finding the instructions for a ramp after seeing only its drawing.

Rule

Rule: Read b at (0, b), calculate m = y2−y1x2−x1, then write f(x) = mx + b. If b is hidden, use b = y1 − mx1.

Step

  1. 1. Read the y-intercept if it is shown. Confirm that the first coordinate is 0.

  2. 2. Choose two clearly marked points. Keep their order the same in both subtractions.

  3. 3. Compute rise divided by run and reduce the fraction.

  4. 4. Write the slope and intercept in f(x) = mx + b.

  5. 5. Substitute both points to verify the recovered equation.

Strategy

  1. Find two readable points and compute slope.

  2. Find b from a visible y-intercept or from b = y − mx.

  3. For matching, compare b, slope sign, then slope size.

  4. Verify the chosen equation at a point other than the intercept.

Question

The graph shows a straight line. It crosses the y-axis at the marked point (0, −2) and passes through the marked points (−4, −5) and (4, 1). Write the equation of the line in the form f(x) = mx + b. Read the y-intercept, find the slope from the two marked points (−4, −5) and (4, 1) and reduce it, write the function, and substitute both points to verify it.

Answer

f(x) = 34x − 2, with slope 34 and y-intercept (0, −2).

Trap

Subtracting the output coordinates in one direction and the input coordinates in the opposite direction. Write arrows between the two points, then use that same direction for both differences.

Strategy

  1. Choose two points in order from left to right.

  2. Subtract ending output minus starting output.

  3. Use the change's sign to name increasing or decreasing; zero change means constant.

Strategy

  1. Read the y-intercept.

  2. Check slope sign.

  3. Measure slope if several choices remain.

  4. Substitute a marked point into the chosen formula.

Term

linear function

Definition

A rule of the form f(x) = mx + b, with fixed numbers m and b. Its graph is a straight nonvertical line, and equal input changes give equal output changes.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

y-axis

Definition

The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.

Term

origin

Definition

The point (0, 0), where the x-axis and y-axis meet. It is the starting address for measuring horizontal and vertical positions.

Term

y-intercept

Definition

Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

rise

Definition

The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

Term

run

Definition

The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

Term

slope-intercept form

Definition

The writing y = mx + b, or f(x) = mx + b. It displays the slope m and the initial value b, giving the y-intercept point (0, b).

Term

increasing function

Definition

A function whose outputs grow as its inputs grow over the input values being discussed. A linear function with positive slope is increasing across its whole domain.

Term

decreasing function

Definition

A function whose outputs shrink as its inputs grow over the input values being discussed. A linear function with negative slope is decreasing across its whole domain.

Term

function

Definition

A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.

Term

coefficient

Definition

The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

Term

fraction

Definition

One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

Term

equation

Definition

A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

Term

factor

Definition

One of the numbers multiplied to make a product. A whole-number factor of a positive whole number divides it with nothing left over.

Term

term

Definition

One piece being added or subtracted in an expression.

Term

constant

Definition

A fixed number. A constant term has no changing variable attached.

Find where the line reaches the x-axis

In plain words

Picture a ramp crossing a painted line on the floor.

Rule

Rule: Set f(x) = 0 to find x-intercepts. For f(x) = mx + b with m ≠ 0, x = −bm and the point is (−bm, 0).

Step

  1. 1. Replace the output f(x) or y with 0. This selects points lying on the x-axis.

  2. 2. Solve the resulting equation for the input.

  3. 3. Substitute that found input into the original function. Its output must be 0.

  4. 4. State the input value and the coordinate point (x, 0).

  5. 5. If m = 0, inspect the constant output instead of dividing by zero.

Strategy

  1. Choose the axis: output 0 for x-axis, input 0 for y-axis.

  2. For an x-intercept, solve mx + b = 0.

  3. Check the found input in the original formula.

  4. Include the 0 coordinate in the answer point.

Question

The graph shows the line f(x) = 5x + 8, which passes through the marked points (−2, −2), (−1, 3) and (0, 8). (a) Use the graph and the marked points to estimate where the line reaches the x-axis. Then find the x-intercept exactly by setting f(x) = 0, check it by substitution, and state it both as an x-value and as a point. (b) Keep the y-intercept 8 but change the slope to 0, giving g(x) = 0x + 8. Decide whether the graph of g reaches the x-axis, and explain why the rule x = −bm cannot be used for g.

Answer

(a) x = −85 (that is, −1.6). The line reaches the x-axis at the point (−85, 0). (b) g(x) = 8 is never 0, so the horizontal line y = 8 has no x-intercept. The rule −bm fails for g because m = 0 would mean dividing by zero.

Trap

Setting x = 0 to find the x-intercept. The axis name tells you which coordinate is allowed to vary: on the x-axis, x varies while y stays 0.

Term

linear function

Definition

A rule of the form f(x) = mx + b, with fixed numbers m and b. Its graph is a straight nonvertical line, and equal input changes give equal output changes.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

x-axis

Definition

The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.

Term

y-axis

Definition

The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.

Term

origin

Definition

The point (0, 0), where the x-axis and y-axis meet. It is the starting address for measuring horizontal and vertical positions.

Term

y-intercept

Definition

Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

rise

Definition

The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

Term

run

Definition

The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

Term

x-intercept

Definition

Where a graph meets the x-axis. The output there is 0. The intercept value is the input x, and its full point is (x, 0).

Term

horizontal line

Definition

A line with the same vertical coordinate at every point. Its equation is y = c for a fixed number c, and its slope is 0.

Term

reciprocal

Definition

The number that multiplies with a given nonzero number to make 1. For a fraction, exchange its numerator and denominator while keeping its sign. Zero has no reciprocal.

Term

function

Definition

A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.

Term

coefficient

Definition

The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

Term

fraction

Definition

One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

Term

equation

Definition

A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

Term

product

Definition

The answer to multiplication.

Term

term

Definition

One piece being added or subtracted in an expression.

Term

constant

Definition

A fixed number. A constant term has no changing variable attached.

Horizontal and vertical lines

In plain words

Picture a shelf and a flagpole.

Rule

Rule: A horizontal line has equation y = c and slope 0. A vertical line has equation x = c, undefined slope, and is not a function of x.

Step

  1. 1. Compare the coordinates of two distinct points.

  2. 2. If their y-values match, keep that output fixed: y = c.

  3. 3. If their x-values match, keep that input fixed: x = c.

  4. 4. Check both given points in the equation.

  5. 5. Do not force a vertical line into y = mx + b.

Question

You need the line through (−3, −4) and (5, −4).

Answer

y = −4.
Slope: 0.

Strategy

  1. Read the coordinates of at least two distinct points.

  2. Keep the repeated coordinate letter and value in the equation.

  3. Compute rise and run if a slope is requested.

  4. Use the function requirement to decide whether it can be y = f(x).

Trap

Writing y = 7 for the vertical line. Say what stays fixed before choosing the letter. Fixed across position means x; fixed height means y.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

x-axis

Definition

The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.

Term

y-axis

Definition

The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.

Term

y-intercept

Definition

Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

rise

Definition

The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

Term

run

Definition

The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

Term

x-intercept

Definition

Where a graph meets the x-axis. The output there is 0. The intercept value is the input x, and its full point is (x, 0).

Term

horizontal line

Definition

A line with the same vertical coordinate at every point. Its equation is y = c for a fixed number c, and its slope is 0.

Term

vertical line

Definition

A line with the same horizontal coordinate at every point. Its equation is x = c. Its slope is undefined, and it is not a function of x.

Term

constant function

Definition

A function that gives the same output for every input in its domain. Its graph is horizontal, and its rate of change is 0.

Term

undefined slope

Definition

The situation on a vertical line: its run is 0, so rise divided by run requires division by 0. No numerical slope exists. Undefined slope is different from slope 0.

Term

vertical line test

Definition

A graph represents y as a function of x exactly when every vertical line meets it at most once. Two meetings would give one input two different outputs.

Term

function

Definition

A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.

Term

numerator

Definition

The top number of a fraction. It counts how many of the denominator's equal-sized parts you have, or names the amount being divided.

Term

denominator

Definition

The bottom number of a fraction. It specifies the equal parts in a whole, or the divisor. A denominator cannot be zero in a defined fraction.

Term

fraction

Definition

One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

Term

equation

Definition

A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

Term

constant

Definition

A fixed number. A constant term has no changing variable attached.

Compare parallel and perpendicular lines

In plain words

Picture two straight train tracks and two edges of a square tile.

Rule

Rule: Nonvertical lines are parallel when m1 = m2 and b1 ≠ b2; coincident when both match. Lines with finite nonzero slopes are perpendicular when m1m2 = −1. Horizontal and vertical lines are perpendicular.

Step

  1. 1. Rewrite each nonvertical equation with y alone so its slope is visible.

  2. 2. Equal slopes and different intercepts mean parallel lines.

  3. 3. Equal slopes and equal intercepts mean coincident lines.

  4. 4. Otherwise multiply the slopes. A product of −1 means perpendicular lines.

  5. 5. Handle a vertical line separately: it is perpendicular to a horizontal line, and parallel to another distinct vertical line.

Question

You need to decide whether y = x + 1 and y = x − 2 are parallel.

Answer

They are parallel.

Strategy

  1. Isolate y in each nonvertical equation.

  2. Check equal slopes and then intercepts.

  3. For unequal finite nonzero slopes, multiply and compare with −1.

  4. Check horizontal/vertical pairs separately.

Trap

Changing only the sign or only flipping the fraction for a perpendicular slope. Both moves are needed, and the product must be −1.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

rise

Definition

The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

Term

run

Definition

The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

Term

slope-intercept form

Definition

The writing y = mx + b, or f(x) = mx + b. It displays the slope m and the initial value b, giving the y-intercept point (0, b).

Term

horizontal line

Definition

A line with the same vertical coordinate at every point. Its equation is y = c for a fixed number c, and its slope is 0.

Term

vertical line

Definition

A line with the same horizontal coordinate at every point. Its equation is x = c. Its slope is undefined, and it is not a function of x.

Term

undefined slope

Definition

The situation on a vertical line: its run is 0, so rise divided by run requires division by 0. No numerical slope exists. Undefined slope is different from slope 0.

Term

parallel lines

Definition

Distinct lines in the same plane that never meet. Nonvertical parallel lines have equal slopes and different y-intercepts. Two distinct vertical lines are parallel too.

Term

coincident lines

Definition

Two line equations whose graphs are the same line. For slope-intercept equations, both the slopes and y-intercepts match. Every point on one is also on the other.

Term

perpendicular lines

Definition

Lines that meet at a right angle. For finite nonzero slopes, one is the negative reciprocal of the other, and their product is −1. Horizontal and vertical lines are also perpendicular.

Term

right angle

Definition

An angle measuring 90°, which is one quarter of a full turn. Perpendicular lines form right angles where they meet.

Term

reciprocal

Definition

The number that multiplies with a given nonzero number to make 1. For a fraction, exchange its numerator and denominator while keeping its sign. Zero has no reciprocal.

Term

negative reciprocal

Definition

The opposite of a nonzero number's reciprocal. Flip the fraction, then reverse its sign. Its product with the original number is −1, which connects finite nonzero perpendicular slopes.

Term

coefficient

Definition

The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

Term

numerator

Definition

The top number of a fraction. It counts how many of the denominator's equal-sized parts you have, or names the amount being divided.

Term

denominator

Definition

The bottom number of a fraction. It specifies the equal parts in a whole, or the divisor. A denominator cannot be zero in a defined fraction.

Term

fraction

Definition

One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

Term

equation

Definition

A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

Term

product

Definition

The answer to multiplication.

Term

term

Definition

One piece being added or subtracted in an expression.

Term

constant

Definition

A fixed number. A constant term has no changing variable attached.

Write a parallel or perpendicular line through a point

In plain words

Picture choosing a road's direction and then moving it until it passes through your house.

Rule

Rule: Choose m equal to the given slope for a parallel line, or m = −1mgiven for a perpendicular line with nonzero finite given slope. Through (x1, y1), use y − y1 = m(x − x1).

Step

  1. 1. Find the original slope from its equation or from two points.

  2. 2. Choose the new slope: same for parallel, negative reciprocal for perpendicular.

  3. 3. Insert the new slope and the required point in point-slope form, or use b = y1 − mx1.

  4. 4. Expand and isolate y if slope-intercept form is wanted.

  5. 5. Plug the supplied point into the final equation and check the slope relationship.

Strategy

  1. Keep the old slope.

  2. Substitute the supplied point to find b.

  3. Plug b back in and verify different intercepts.

Strategy

  1. Check for a horizontal or vertical given line.

  2. Otherwise take the negative reciprocal of its slope.

  3. Use the point to find b and plug it back in.

Strategy

  1. Find the given slope.

  2. Decide same direction or right-angle direction.

  3. Choose the new slope or the appropriate horizontal/vertical equation.

  4. Anchor the new line at the supplied point.

  5. Check the point and relationship in the original conditions.

Question

The graph shows the line x + 2y = 6, which crosses the axes at (0, 3) and (6, 0), and the point P(−4, −1), which is not on the line. (a) Write, in slope-intercept form, an equation of the line through P that is parallel to x + 2y = 6. (b) Write, in slope-intercept form, an equation of the line through P that is perpendicular to x + 2y = 6. Check each answer by substituting P and by comparing slopes.

Answer

(a) Parallel: y = −12x − 3. (b) Perpendicular: y = 2x + 7.

Trap

Using the old slope in a perpendicular problem, or using the old intercept after changing the slope. Choose the direction first, then use the new point to find the new intercept.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

y-intercept

Definition

Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

rise

Definition

The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

Term

run

Definition

The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

Term

slope-intercept form

Definition

The writing y = mx + b, or f(x) = mx + b. It displays the slope m and the initial value b, giving the y-intercept point (0, b).

Term

horizontal line

Definition

A line with the same vertical coordinate at every point. Its equation is y = c for a fixed number c, and its slope is 0.

Term

vertical line

Definition

A line with the same horizontal coordinate at every point. Its equation is x = c. Its slope is undefined, and it is not a function of x.

Term

parallel lines

Definition

Distinct lines in the same plane that never meet. Nonvertical parallel lines have equal slopes and different y-intercepts. Two distinct vertical lines are parallel too.

Term

right angle

Definition

An angle measuring 90°, which is one quarter of a full turn. Perpendicular lines form right angles where they meet.

Term

reciprocal

Definition

The number that multiplies with a given nonzero number to make 1. For a fraction, exchange its numerator and denominator while keeping its sign. Zero has no reciprocal.

Term

negative reciprocal

Definition

The opposite of a nonzero number's reciprocal. Flip the fraction, then reverse its sign. Its product with the original number is −1, which connects finite nonzero perpendicular slopes.

Term

point-slope form

Definition

The equation y − y1 = m(x − x1). It describes a nonvertical line using slope m and a known point (x1, y1). Each change is measured from that point.

Term

coefficient

Definition

The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

Term

equation

Definition

A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

Term

product

Definition

The answer to multiplication.

Term

term

Definition

One piece being added or subtracted in an expression.

Term

constant

Definition

A fixed number. A constant term has no changing variable attached.

Find the point shared by two lines

In plain words

Picture two walkers starting at different places on straight paths.

Rule

Rule: A solution to a system satisfies every equation. For y = f(x) and y = g(x), solve f(x) = g(x), find y, and check both. Two lines have one, no, or infinitely many shared points.

Step

  1. 1. Graph the two lines to locate or estimate their shared point.

  2. 2. If both outputs are formulas in the same input, set those formulas equal.

  3. 3. Solve for the shared input. Watch for a contradiction or an equality true for every input.

  4. 4. Substitute a found input into one original formula to obtain the output.

  5. 5. Substitute the point into both original equations, then report both coordinates.

Question

You need the shared point, if any, of y = x + 1 and y = x + 4.

Answer

No solution.

Strategy

  1. Put each nonvertical equation in output form.

  2. Set the formulas equal and solve.

  3. If a variable value remains, find its output and check both equations.

  4. If the variable disappears, decide whether the remaining equality is false or always true.

  5. Use the graph to interpret the result.

Trap

Finding the shared input and stopping. A point needs its output too. Also check both original equations; a point that fits only one is not a system solution.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

x-axis

Definition

The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.

Term

y-axis

Definition

The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.

Term

y-intercept

Definition

Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

x-intercept

Definition

Where a graph meets the x-axis. The output there is 0. The intercept value is the input x, and its full point is (x, 0).

Term

vertical line

Definition

A line with the same horizontal coordinate at every point. Its equation is x = c. Its slope is undefined, and it is not a function of x.

Term

parallel lines

Definition

Distinct lines in the same plane that never meet. Nonvertical parallel lines have equal slopes and different y-intercepts. Two distinct vertical lines are parallel too.

Term

coincident lines

Definition

Two line equations whose graphs are the same line. For slope-intercept equations, both the slopes and y-intercepts match. Every point on one is also on the other.

Term

system of linear equations

Definition

Two or more linear equations considered together. A solution must make every equation true at the same time. For two equations in x and y, shared graph points show the solutions.

Term

solution to a system

Definition

A set of variable values that makes every equation in the system true. In two variables, write a full coordinate pair and check it in both equations.

Term

point of intersection

Definition

A point shared by two graphs. It has the same horizontal and vertical coordinates on both. For two line equations, such a point is a solution to their system.

Term

contradiction

Definition

A statement that cannot be true, such as 0 = 4. If correct equation steps produce a contradiction, no values satisfy the original equations together.

Term

infinitely many solutions

Definition

A system has infinitely many solutions when an unlimited collection of variable values satisfies every equation. Two coincident lines share every point on their line.

Term

coefficient

Definition

The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

Term

denominator

Definition

The bottom number of a fraction. It specifies the equal parts in a whole, or the divisor. A denominator cannot be zero in a defined fraction.

Term

fraction

Definition

One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

Term

equation

Definition

A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

Term

variable

Definition

A letter representing a number that may change or is unknown. The same letter has the same value everywhere within one equation.

Term

term

Definition

One piece being added or subtracted in an expression.

Use an intersection to find break-even

In plain words

Picture selling notebooks at a table.

Rule

Rule: C(x) = F + vx, R(x) = px, and profit P(x) = R(x) − C(x). Break-even satisfies C(x) = R(x). For F > 0 and p > v, x = Fp−v.

Step

  1. 1. Define the input quantity and its units; count sold items as nonnegative whole numbers.

  2. 2. Put fixed expense at the cost intercept and per-item expense at the cost slope.

  3. 3. Put selling price at the revenue slope, with revenue 0 before any sales.

  4. 4. Set cost equal to revenue and solve for the quantity.

  5. 5. Plug the quantity into both functions, then report quantity and dollars together.

  6. 6. Compare revenue with cost to tell profit from loss.

  7. 7. If the calculated quantity is between whole items, the model has no exact whole-item break-even. When each sale contributes a positive amount, use the next whole count to reach nonnegative profit.

Question

You need the cost rule for a $10 setup fee and $3 per item, then the cost of 4 items.

Answer

C(x) = 10 + 3x.
C(4) = $22.

Strategy

  1. Construct cost and revenue functions.

  2. Set them equal and solve for quantity.

  3. Plug that quantity into both original functions.

  4. Subtract cost from revenue to interpret other quantities.

Strategy

  1. Identify fixed cost F, per-item cost v and sale price p.

  2. Write C(x) = F + vx and R(x) = px.

  3. Set F + vx = px, then solve for x.

  4. Plug the found quantity into both functions.

  5. Report quantity, common dollar amount and zero profit.

  6. If whole items are required, distinguish an exact whole crossing from a fractional model crossing.

Trap

Confusing the shared revenue with profit. At break-even both cost and revenue can be large, but profit is their difference, which is 0.

Term

graph

Definition

A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

Term

input

Definition

The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

Term

output

Definition

The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

Term

origin

Definition

The point (0, 0), where the x-axis and y-axis meet. It is the starting address for measuring horizontal and vertical positions.

Term

initial value

Definition

The output when the input is 0. In a linear function f(x) = mx + b, it is b. It describes the amount present before input-dependent change begins.

Term

slope

Definition

A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

Term

rise

Definition

The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

Term

run

Definition

The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

Term

transformation

Definition

A change to a graph made by changing its rule. Shifts move it, reflections flip it, and stretches or compressions change how far points sit from an axis.

Term

x-intercept

Definition

Where a graph meets the x-axis. The output there is 0. The intercept value is the input x, and its full point is (x, 0).

Term

undefined slope

Definition

The situation on a vertical line: its run is 0, so rise divided by run requires division by 0. No numerical slope exists. Undefined slope is different from slope 0.

Term

parallel lines

Definition

Distinct lines in the same plane that never meet. Nonvertical parallel lines have equal slopes and different y-intercepts. Two distinct vertical lines are parallel too.

Term

break-even point

Definition

The quantity and money amount where total revenue equals total cost. It is the intersection of their graphs. At that quantity, profit is 0.

Term

fixed cost

Definition

A cost that stays the same as the number of items changes within a model. It is present even at quantity 0 and contributes the cost function's initial value.

Term

variable cost

Definition

The part of cost that changes with the number of items. In a linear model, a constant cost per item multiplied by quantity gives the total variable cost.

Term

cost function

Definition

A rule giving total cost for an input quantity. In a linear model, C(x) = vx + F adds total variable cost vx to fixed cost F.

Term

revenue

Definition

The money received from sales before subtracting costs. If every item sells for the same price, total revenue is price multiplied by the number sold.

Term

revenue function

Definition

A rule giving sales money for an input quantity. With a constant selling price p and quantity x sold, R(x) = px. Selling 0 items then produces revenue 0.

Term

profit

Definition

Revenue minus total cost. A positive result is money remaining after costs. A negative result is a loss, and 0 means break-even.

Term

function

Definition

A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.

Term

domain

Definition

The collection of allowed inputs for a function. A formula may accept every real input while a practical situation permits only meaningful quantities.

Term

coefficient

Definition

The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

Term

fraction

Definition

One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

Term

order of operations

Definition

The agreed calculation order: grouping, powers, multiplication and division, then addition and subtraction. Within equal-priority operations, work left to right. A power repeats multiplication.

Term

equation

Definition

A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

Term

variable

Definition

A letter representing a number that may change or is unknown. The same letter has the same value everywhere within one equation.

Term

product

Definition

The answer to multiplication.

Term

term

Definition

One piece being added or subtracted in an expression.

Term

divisor

Definition

The number you divide by. It must be nonzero in defined division.

Term

nonnegative

Definition

Zero or positive. Nonnegative numbers include 0 and exclude every negative number.

Term

continuous model

Definition

A model allowing inputs between whole-number counts. A drawn line may cross at a fractional input even when actual sales require whole items.