College Algebra / Graphs of linear functions
Graphs of linear functions
All 10 lessons, in order.
The unit at a glance
- Draw a line by plotting points
Picture a city map.
- Start at the y-intercept and walk the slope
Picture walking along a ramp drawn on a map.
- Build a line by changing the identity function
Picture a flexible drawing of a ramp.
- Read a graph and write its equation
Picture finding the instructions for a ramp after seeing only its drawing.
- Find where the line reaches the x-axis
Picture a ramp crossing a painted line on the floor.
- Horizontal and vertical lines
Picture a shelf and a flagpole.
- Compare parallel and perpendicular lines
Picture two straight train tracks and two edges of a square tile.
- Write a parallel or perpendicular line through a point
Picture choosing a road's direction and then moving it until it passes through your house.
- Find the point shared by two lines
Picture two walkers starting at different places on straight paths.
- Use an intersection to find break-even
Picture selling notebooks at a table.
Rules (10)
- Draw a line by plotting points
Graph a linear function by plotting at least two distinct coordinate pairs (x, f(x)) and drawing the entire straight line through them. A third point checks the arithmetic.
- Start at the y-intercept and walk the slope
In y = mx + b, the y-intercept is (0, b) and m = = , with ≠ .
- Build a line by changing the identity function
To transform y = x into y = mx + b, multiply outputs by m, including a reflection if m < 0, then shift outputs by b. Stretch if |m| > 1; compress if 0 < |m| < 1.
- Read a graph and write its equation
Read b at (0, b), calculate m = , then write f(x) = mx + b. If b is hidden, use b = − m.
- Find where the line reaches the x-axis
Set f(x) = 0 to find x-intercepts. For f(x) = mx + b with m ≠ 0, x = − and the point is (−, 0).
- Horizontal and vertical lines
A horizontal line has equation y = c and slope 0. A vertical line has equation x = c, undefined slope, and is not a function of x.
- Compare parallel and perpendicular lines
Nonvertical lines are parallel when = and ≠ ; coincident when both match. Lines with finite nonzero slopes are perpendicular when = −1. Horizontal and vertical lines are perpendicular.
- Write a parallel or perpendicular line through a point
Choose m equal to the given slope for a parallel line, or m = − for a perpendicular line with nonzero finite given slope. Through (, ), use y − = m(x − ).
- Find the point shared by two lines
A solution to a system satisfies every equation. For y = f(x) and y = g(x), solve f(x) = g(x), find y, and check both. Two lines have one, no, or infinitely many shared points.
- Use an intersection to find break-even
C(x) = F + vx, R(x) = px, and profit P(x) = R(x) − C(x). Break-even satisfies C(x) = R(x). For F > 0 and p > v, x = .
Recipes (10)
- Draw a line by plotting points
- 1. Choose input values. If the slope contains a fraction, try multiples of its denominator. Multiples are results of multiplying by whole numbers: for a denominator of 3, use 0 × 3 = 0, 1 × 3 = 3 and 2 × 3 = 6.
- 2. Substitute each input into the function to find its output.
- 3. Record the pairs in a values picture, then plot each input across and output up.
- 4. Draw a straight line through the points and extend it both ways.
- 5. If a third point misses the line, recalculate before drawing.
- Start at the y-intercept and walk the slope
- 1. Read b, then substitute 0 to verify the point (0, b).
- 2. Read m. Write a whole-number slope over 1.
- 3. Choose signed rise and run whose quotient is m.
- 4. Start at (0, b), move by that run and rise, and repeat.
- 5. Draw the line through the points. Check one point by substitution.
- Build a line by changing the identity function
- 1. Sketch the identity function y = x using (0, 0) and (1, 1).
- 2. Read |m|, the size of m without its sign, to decide whether heights stretch or compress.
- 3. If m < 0, reflect the heights across the x-axis as part of that multiplication.
- 4. Add b to every new height. Positive b moves up; negative b moves down.
- 5. Verify a point in the final formula. Multiplication must occur before this stated shift.
- Read a graph and write its equation
- 1. Read the y-intercept if it is shown. Confirm that the first coordinate is 0.
- 2. Choose two clearly marked points. Keep their order the same in both subtractions.
- 3. Compute rise divided by run and reduce the fraction.
- 4. Write the slope and intercept in f(x) = mx + b.
- 5. Substitute both points to verify the recovered equation.
- Find where the line reaches the x-axis
- 1. Replace the output f(x) or y with 0. This selects points lying on the x-axis.
- 2. Solve the resulting equation for the input.
- 3. Substitute that found input into the original function. Its output must be 0.
- 4. State the input value and the coordinate point (x, 0).
- 5. If m = 0, inspect the constant output instead of dividing by zero.
- Horizontal and vertical lines
- 1. Compare the coordinates of two distinct points.
- 2. If their y-values match, keep that output fixed: y = c.
- 3. If their x-values match, keep that input fixed: x = c.
- 4. Check both given points in the equation.
- 5. Do not force a vertical line into y = mx + b.
- Compare parallel and perpendicular lines
- 1. Rewrite each nonvertical equation with y alone so its slope is visible.
- 2. Equal slopes and different intercepts mean parallel lines.
- 3. Equal slopes and equal intercepts mean coincident lines.
- 4. Otherwise multiply the slopes. A product of −1 means perpendicular lines.
- 5. Handle a vertical line separately: it is perpendicular to a horizontal line, and parallel to another distinct vertical line.
- Write a parallel or perpendicular line through a point
- 1. Find the original slope from its equation or from two points.
- 2. Choose the new slope: same for parallel, negative reciprocal for perpendicular.
- 3. Insert the new slope and the required point in point-slope form, or use b = − m.
- 4. Expand and isolate y if slope-intercept form is wanted.
- 5. Plug the supplied point into the final equation and check the slope relationship.
- Find the point shared by two lines
- 1. Graph the two lines to locate or estimate their shared point.
- 2. If both outputs are formulas in the same input, set those formulas equal.
- 3. Solve for the shared input. Watch for a contradiction or an equality true for every input.
- 4. Substitute a found input into one original formula to obtain the output.
- 5. Substitute the point into both original equations, then report both coordinates.
- Use an intersection to find break-even
- 1. Define the input quantity and its units; count sold items as nonnegative whole numbers.
- 2. Put fixed expense at the cost intercept and per-item expense at the cost slope.
- 3. Put selling price at the revenue slope, with revenue 0 before any sales.
- 4. Set cost equal to revenue and solve for the quantity.
- 5. Plug the quantity into both functions, then report quantity and dollars together.
- 6. Compare revenue with cost to tell profit from loss.
- 7. If the calculated quantity is between whole items, the model has no exact whole-item break-even. When each sale contributes a positive amount, use the next whole count to reach nonnegative profit.
Traps (10)
- Draw a line by plotting points
Plotting (3, 3) as output first can hide the mistake because both numbers match. Practice with (0, 5): across 0, then up 5. The input always comes first.
- Start at the y-intercept and walk the slope
Reading − as down 3 and right 2. The top is rise, the bottom is run. Write the two movements beside the fraction before plotting.
- Build a line by changing the identity function
Doing the stated downward shift first and then halving the heights. That produces (x − 3) = x − , a different line.
- Read a graph and write its equation
Subtracting the output coordinates in one direction and the input coordinates in the opposite direction. Write arrows between the two points, then use that same direction for both differences.
- Find where the line reaches the x-axis
Setting x = 0 to find the x-intercept. The axis name tells you which coordinate is allowed to vary: on the x-axis, x varies while y stays 0.
- Horizontal and vertical lines
Writing y = 7 for the vertical line. Say what stays fixed before choosing the letter. Fixed across position means x; fixed height means y.
- Compare parallel and perpendicular lines
Changing only the sign or only flipping the fraction for a perpendicular slope. Both moves are needed, and the product must be −1.
- Write a parallel or perpendicular line through a point
Using the old slope in a perpendicular problem, or using the old intercept after changing the slope. Choose the direction first, then use the new point to find the new intercept.
- Find the point shared by two lines
Finding the shared input and stopping. A point needs its output too. Also check both original equations; a point that fits only one is not a system solution.
- Use an intersection to find break-even
Confusing the shared revenue with profit. At break-even both cost and revenue can be large, but profit is their difference, which is 0.
Lesson 1 of 10
Draw a line by plotting points
Open this lessonLeans on 1Comes back in 0
Comes back in
No lesson links recorded.
1 In plain words
Picture a city map. A location needs two instructions: how far across, then how far up. A coordinate pair, such as (2, 5), records those two instructions in that order.
A function is a rule that gives one output for each input. Its graph is a picture of all the input and output pairs. You put the input on the horizontal x-axis and the output on the vertical y-axis.
A linear function gives a straight line. You can mark a few addresses that obey its rule and draw the line through them. Two different addresses locate the line. A third address helps you notice a calculation mistake before you draw.
2 Picture it
Reminder
Reminder: Coordinate pairs, Function notation, Order of operations, Fraction multiplication, Signed addition
- Coordinate pairs. (−2, 3) means left 2, then up 3; the input is first.
- Function notation. f(3) asks for the output at input 3; if f(x) = 2x, then f(3) = 6.
- Order of operations. Multiply before adding: 2 × 3 + 1 = 7.
- Fraction multiplication. × 6 = = 4; multiply the top, then divide.
- Signed addition. −4 + 5 = 1 because five forward steps undo four backward steps.
3 Why
For f(x) = mx + b, changing x by any amount changes the output by m times that amount. Every step right 1 changes height by m. Repeating that same step traces a straight line, so the graph never changes its slant. Two distinct points determine one straight line. A third calculated point must fall on it if the arithmetic is correct. Connecting only the marked points would leave out other accepted inputs, so an unrestricted linear function extends in both directions.
4 The rule
Graph a linear function by plotting at least two distinct coordinate pairs (x, f(x)) and drawing the entire straight line through them.
A third point checks the arithmetic.
The same idea, five ways
put an input in, find its output, and mark their address.
The graph contains every point whose output obeys the function rule.
- y = f(x)
- (x, f(x))
- f(x) = mx + b
A street map locates an address with two directions.
The same idea, other ways
The point (1, 2) means one unit across and two up. For f(x) = 2x, the address (2, 4) also fits, because twice 2 is 4.
Each chosen input makes one output. Plotting is recording the machine's answers on a map.
5 How
- Choose input values. If the slope contains a fraction, try multiples of its denominator. Multiples are results of multiplying by whole numbers: for a denominator of 3, use 0 × 3 = 0, 1 × 3 = 3 and 2 × 3 = 6.
- Substitute each input into the function to find its output.
- Record the pairs in a values picture, then plot each input across and output up.
- Draw a straight line through the points and extend it both ways.
- If a third point misses the line, recalculate before drawing.
Graph from a formula by choosing points
- Choose convenient inputs.
- Compute one output per input using multiplication before addition.
- Plot at least two distinct points and check a third.
- Extend the straight line through the points.
6 Worked example
Worked example
Plot points to graph f(x) = −x + 5
Graph the linear function f(x) = −x + 5 by plotting points. Choose three inputs, find their outputs, record the coordinate pairs in a values picture, plot them, and draw the line. Use the third point to check the arithmetic before drawing.
Show the steps and the answer
- Choose the inputs and .The slope − has denominator 5. Multiplying it by a multiple of 5 cancels the denominator, so every output is a whole number. An input such as x = 1 would give f(1) = − + 5 = = 4.4, which is hard to plot accurately.
- Substitute x = 0: .Replacing x with an input and evaluating gives that input's output. At x = 0 the slope term is 0, so the output is the constant term 5.
- Substitute x = 5: . × 5 = = 3, so the fraction clears and the output is a whole number.
- Substitute x = 10: . × 10 = = 6. Two points are enough to fix the line. This third pair is there to check the arithmetic.
- Record the pairs in a values picture: the inputs 0, 5 and 10 have the outputs 5, 2 and . This gives the points (0, 5), (5, 2) and .Writing each output beside its input keeps the pairs together, and each point is written (input, output).
- Draw axes from to 12 across and from to 9 up. Plot each point by going across by the input and up by the output: (0, 5) is 5 up on the y-axis, (5, 2) is 5 across and 2 up, and is 10 across and 1 down.The input is the horizontal coordinate and the output is the vertical one, so a negative output means moving down. The axes leave room to extend the line past the points on both sides.
- Lay a ruler through (0, 5) and (5, 2) and look at . It sits on the ruler's edge: each move from one point to the next is 5 across and 3 down.Equal steps in input along a line give equal steps in output, and 3 down for every 5 across is the slope −. If the third point had missed the ruler, the outputs would be recalculated before drawing.
- Draw the straight line through the three points. Extend it to the edges of the grid in both directions and put an arrow at each end.The graph of a linear function is a straight line. Also, f has an output for every input, not just 0, 5 and 10, so the line continues both ways.
Work to write
- Inputs are multiples of 5: x = 0, 5, 10
- Values picture: x = 0, 5, 10; f(x) = 5, 2, −1
- Points (0, 5), (5, 2), (10, −1) plotted; (10, −1) lies on the line through the other two
- Straight line drawn through the points and extended both ways
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Choose 0 as one input when possible. Multiplication by 0 leaves the starting value.
7 The trap
Plotting (3, 3) as output first can hide the mistake because both numbers match. Practice with (0, 5): across 0, then up 5. The input always comes first.
Lesson 2 of 10
Start at the y-intercept and walk the slope
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture walking along a ramp drawn on a map. You need a starting address and instructions for each move. The y-intercept is the point where the line meets the upright y-axis. That axis has input 0, so the starting address is (0, b). The slope tells you how the height changes as you move across. Rise is vertical displacement, meaning change in height, negative when you go down. Run is horizontal displacement, meaning change across. A slope of two thirds tells you to go up 2 for every 3 right. A slope of negative two thirds sends you down 2 for every 3 right. Repeating the same move keeps you on the line.
2 Picture it
Reminder
Reminder: Substitution, Reducing fractions, Subtracting a negative, Signs in division, Axis position
- Substitution. At x = 0, 3x + 7 becomes 3 × 0 + 7 = 7.
- Reducing fractions. = because both top and bottom divide by 2.
- Subtracting a negative. 4 − (−2) = 6; removing a backward amount adds a forward amount.
- Signs in division. is negative, while is positive.
- Axis position. A point (0, 5) is on the y-axis because it has no horizontal move.
3 Why
Substitute x = 0 into y = mx + b. The product m × 0 disappears, leaving y = b. This output at input 0 is called the initial value; its graph point is the y-intercept. For two points, subtract their equations: − = m( − ). Divide by their nonzero horizontal change to obtain the slope formula. This explains why the walk is rise divided by run. You may reverse both directions because a negative divided by a negative gives the same slope. Reversing only one changes the slope.
4 The rule
In mx , the y-intercept is (0, b) and , with .
The same idea, five ways
slope is height change for each change across.
A linear function has a constant rate of change and starts at output b when the input is 0.
- y = mx + b
- b = f(0)
A ramp has a fixed climb for each distance forward.
The same idea, other ways
For m = −, start at (0, 5), go right 3 and down 2 to (3, 3). Reverse both moves to go left 3 and up 2 to (−3, 7).
If you pay $2 per mile, three more miles add $6. The rate is = 2. The fixed starting charge is separate from that rate.
For y = 2x + 1, input 0 gives output 1. Moving from input 0 to input 1 changes the output from 1 to 3: a rise of 2 for a run of 1.
The same b is added to both outputs. Subtracting them cancels b, leaving only m times the input change.
− = (m + b) − (m + b)
5 How
- Read b, then substitute 0 to verify the point (0, b).
- Read m. Write a whole-number slope over 1.
- Choose signed rise and run whose quotient is m.
- Start at (0, b), move by that run and rise, and repeat.
- Draw the line through the points. Check one point by substitution.
Graph using one point and the slope
- Identify the y-intercept (0, b).
- Turn m into a signed rise divided by a signed run.
- Walk that change at least twice.
- Check the plotted outputs in the original equation.
6 Worked example
Worked example
Walk a negative fraction slope from the y-intercept
Graph the line y = −x + 6 by starting at its y-intercept and walking the slope. State the y-intercept, give a signed rise and run that match the slope, find two more points to the right of the y-axis and one point to the left of it, then draw the line and check one of your points by substitution.
Show the steps and the answer
- Read b: in the constant term is 6, so . Substitute to verify: . Plot the y-intercept (0, 6).The y-intercept is the point where x = 0. There the term mx is zero, so y = b. Substituting 0 confirms that (0, 6) is on the line before every later step is built on it.
- Read m: the coefficient of x is , so . It is already a fraction, so it needs no rewriting. (Only a whole-number slope needs rewriting: for example, 5 would become .)The slope is , so it has to be seen as a top number over a bottom number before it can be walked. The minus sign in front belongs to m and must not be dropped.
- Put the minus sign on the top number: , so rise and run . On the grid that is 2 units right and 3 units down. The same slope can be written : 2 units left and 3 units up.The rise is the vertical change and the run is the horizontal change, and their quotient must be m. A negative quotient needs exactly one negative part: and both equal −, but = , which would make the line climb.
- Start at (0, 6) and add the run to x and the rise to y: . Repeat from (2, 3): . For a point on the left, return to (0, 6) and use run , rise 3: .For any two points on the line, = m. Each step changes x by the run and y by the rise, so that ratio stays − and every landing point is on the line. A second step gives a third point, which makes the line easier to draw accurately.
- Draw one straight line through , (0, 6), (2, 3) and (4, 0) and extend it past both end points. Check (4, 0) by substitution: , which is its y-coordinate.Two points fix a line, so the other points test the walk: if they were not in one straight row, a step went wrong. Substitution tests a point against the equation itself, not against the walk that produced it.
- The y-intercept is (0, 6). With rise −3 and run 2, the walk lands on (2, 3) and (4, 0)
- with rise 3 and run −2 it lands on (−2, 9). The graph is the straight line through these points. It falls 3 units for every 2 units to the right and crosses the x-axis at (4, 0).
Work to write
- y = −(0) + 6 = 6, so the y-intercept is (0, 6)
- m = − = , so rise = −3 and run = 2
- (0 + 2, 6 − 3) = (2, 3) and (2 + 2, 3 − 3) = (4, 0)
- Line drawn through (−2, 9), (0, 6), (2, 3) and (4, 0)
- Check: −(4) + 6 = −6 + 6 = 0, so (4, 0) is on the line
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
A whole-number slope
You need to draw y = x + 2 from one starting point and a one-unit move.
Show the steps and the answer
- At input 0, , so plot (0, 2).This verifies the y-intercept.
- Write the slope 1 as . Go right 1 and up 1 to (1, 3), then to (2, 4).Each move has rise divided by run equal to 1.
Rung 2 of 4
A positive fractional slope
You need to draw y = x − 1 using whole-number movements.
Show the steps and the answer
- At input 0, , so plot .The product with 0 vanishes.
- Use rise 1 and run 2. Move to (2, 0), then (4, 1).The fraction measures the two-unit run, so no fractional coordinate is needed.
Rung 3 of 4
A negative slope
You need to draw y = −x + 4 and keep the downward direction correct.
Show the steps and the answer
- Input 0 gives output 4. Plot (0, 4).This finds the starting point on the y-axis.
- Move right 2 and down 3 to (2, 1), then .The signed quotient is the given slope.
Rung 4 of 4
A negative input
You need a point to the left of the y-axis on f(x) = −x + 5.
Show the steps and the answer
- Start at (0, 5). Reverse the rightward move: go left 3 and up 2.Changing both directions preserves = −.
- The new point is (−3, 7). Substitute −3: .Plugging the found input back in checks that the point is on the original graph.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: rise over run. Say the top movement before the bottom movement.
- A downward line from left to right must have negative slope; compare the picture with your sign.
- Each unrestricted linear function has a y-intercept because input 0 is allowed. A context may restrict inputs, so check its stated domain.
7 The trap
Reading − as down 3 and right 2. The top is rise, the bottom is run. Write the two movements beside the fraction before plotting.
Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.
Lesson 3 of 10
Build a line by changing the identity function
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a flexible drawing of a ramp. You can make every height twice as large, flatten every height to half its size, turn the drawing upside down, or lift the whole drawing upward. Those changes are transformations. Start with the identity function, f(x) = x, whose output repeats its input. To make f(x) = mx + b, first multiply each height by m, then add b to that new height. Multiplying changes the slant. Adding lifts or lowers the entire line without changing the slant. When m is negative, multiplying also puts each height on the opposite side of the horizontal axis. The order matters because lifting before multiplying would multiply the lift too.
2 Picture it
Reminder
Reminder: Absolute-value bars, Order of operations, Distribution, Absolute value, Coordinate pairs, Multiplying signed numbers
- Absolute-value bars. |−3| = 3, |3| = 3 and |0| = 0. Say absolute value of the number; the bars ask for distance from 0.
- Order of operations. × 2 − 3 = 1 − 3 = −2; multiply before subtracting.
- Distribution. 2(x − 3) = 2x − 6 because 2 multiplies both terms.
- Absolute value. |−| = measures size without sign.
- Coordinate pairs. Changing (2, 3) to (2, 6) changes height only.
- Multiplying signed numbers. −2 × (−2) = 4; two negative factors give a positive product.
3 Why
A point (x, x) on the identity graph becomes (x, mx) after its height is multiplied. It then becomes (x, mx + b) after the shift. That is exactly the requested formula. Reversing those operations gives m(x + b) = mx + mb, which usually has a different intercept. Absolute value means size without sign, so |m| controls steepness while the sign of m controls reflection. These descriptions use the same arithmetic that evaluates the function.
4 The rule
To transform into mx , multiply outputs by m, including a reflection if m < 0, then shift outputs by b.
Stretch if |m| > 1; compress if 0 < |m| < 1.
The same idea, five ways
multiply the old height, then move it up or down.
The line y = mx + b is a transformed copy of the identity graph.
- f(x) = x
- g(x) = mf(x) + b
- g(x) = mx + b
- (x, x) becomes (x, mx + b)
Resize a ramp drawing's heights, turn it over if needed, then slide the drawing.
The same idea, other ways
At input 2, the identity output is 2. Multiplication by makes it 1. Subtracting 3 makes it −2. The final point is (2, −2).
The line y = x is flatter than y = x. Moving that whole flatter line down 3 gives y = x − 3; its slope remains .
Input 0 is a fast check: multiply 0 by any m, then add b, and the output is b. If your graph starts somewhere else, the stated operations were not followed.
Part 1: Vertical stretch
Picture pulling a drawing taller while keeping its width fixed. A vertical stretch multiplies every height by the same positive factor greater than 1. Each nonzero height moves farther from the x-axis. A height below the axis stays below during this positive multiplication, but its distance from the axis grows.
- Rule: Multiplication by a positive factor a > 1 stretches heights vertically.
- Rule: In y = mx, |m| > 1 includes a vertical stretch; if m < 0, reflection also occurs.
- Rule: |m| = 1 preserves height size. Multiplication by 0 sends all heights to 0, after which adding b gives y = b.
Reminder
Reminder: Absolute value
- Absolute value. |−3| = 3 is the distance of −3 from 0, with no direction sign.
The same idea, five ways
multiply every height by the same size greater than 1.
A vertical stretch enlarges output distances from the x-axis while keeping inputs fixed.
- g(x) = af(x), a > 1
- (x, y) becomes (x, ay)
A copier changes the drawing's height while its width stays fixed.
Worked example
Double the height
You need to transform y = x into y = 2x and show what happens to a point.
Show the steps and the answer
- The old point at input 3 is (3, 3).The identity output equals its input.
- Multiply the height by 2: , so the new point is (3, 6).A vertical stretch changes the second coordinate only.
- At input the old point is . Multiply its height by 2: becomes .A positive stretch preserves which side of the axis the point occupies while doubling its distance from the axis.
- y = 2x.
- The point (3, 3) becomes (3, 6).
- The point (−3, −3) becomes (−3, −6).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- A size above 1 spreads heights away from the axis; a size between 0 and 1 pulls them closer.
Part 2: Vertical compression
Picture pressing a drawing shorter while leaving its width alone. A vertical compression multiplies each height by a positive factor between 0 and 1. Heights move toward the x-axis without crossing it. Half of a height of 2 is 1; half of a height of −6 is −3. Both points become closer to zero.
- Rule: Multiplication by 0 < a < 1 compresses heights vertically.
- Rule: In y = mx, 0 < |m| < 1 includes a compression; a negative m also reflects.
- Rule: Factor 0 is not an ordinary compression: it collapses every output to 0.
Reminder
Reminder: Fraction multiplication
- Fraction multiplication. × (−6) = −3, half of the signed amount.
The same idea, five ways
take the same fractional share of every height.
A vertical compression shrinks output distances from the x-axis without changing inputs.
- g(x) = af(x), 0 < a < 1
- (x, y) becomes (x, ay)
Press a drawing shorter without changing its width.
Worked example
Compress y = x by a factor of , then shift up 2
The graph shows the line y = x + 2, which passes through (0, 2) and (4, 3). Start with the identity function y = x. Describe, in order, the transformations that turn the graph of y = x into this line. Say whether the heights stretch or compress, whether there is a reflection, and how far and in which direction the line shifts. Track the points (0, 0), (1, 1) and (4, 4) of y = x through each step, then verify a point in the final formula.
Show the steps and the answer
- Sketch the identity function through (0, 0) and (1, 1), and also mark (4, 4).On y = x every height equals its input, so these points are easy to plot. (4, 4) is added because one quarter of its height is 1, a whole number, which makes the new line easy to read.
- Read , so . Since , the heights compress, so multiply every height by . (0, 0) stays (0, 0), (1, 1) becomes , and (4, 4) becomes (4, 1).The rule says the heights compress when 0 < |m| < 1. Multiplying by a number between 0 and 1 pulls every point toward the x-axis, so the line gets flatter. It now rises 1 unit for every 4 units to the right instead of 1 for 1. A height of 0 stays 0, so (0, 0) does not move.
- Check the sign of m. is positive, so there is no reflection, and the compressed line still rises from left to right.A reflection across the x-axis is part of the multiplication only when m < 0. A positive multiplier keeps every height on the same side of the x-axis.
- Add to every compressed height. (0, 0) moves to (0, 2), moves to , and (4, 1) moves to (4, 3). Draw the line through (0, 2) and (4, 3).b = 2 is positive, so the whole line moves up 2 units. The 2 is added after the heights have been multiplied, so the multiplier never acts on it.
- Verify a point in . For , which matches (4, 3).Every point built by the transformations must satisfy the final formula. The order matters. Shifting first would give y = x + 2, and compressing that gives y = (x + 2) = x + . On that line x = 4 gives , not 3, so the compression must come before the shift.
Work to write
- |m| = and 0 < < 1, so the heights compress by a factor of
- Compression: (0, 0) → (0, 0), (1, 1) → (1, ), (4, 4) → (4, 1)
- m = > 0, so there is no reflection
- b = 2 > 0, so shift up 2 units, after the compression
- Shift: (0, 0) → (0, 2), (1, ) → (1, ), (4, 1) → (4, 3)
- Check: (4) + 2 = 1 + 2 = 3, so (4, 3) is on y = x + 2
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Between 0 and 1 means a share smaller than the whole, so distances shrink.
Part 3: Reflection across the x-axis
Think of the horizontal axis as a mirror lying on a table. A vertical reflection moves a point the same distance to the opposite side of that mirror. The across coordinate stays fixed. Multiplication by a negative number includes this turn as well as any stretch or compression.
- Rule: A vertical reflection sends (x, y) to (x, −y).
- Rule: In y = mx + b, m < 0 reflects the identity graph before the shift.
Reminder
Reminder: Negative multiplication
- Negative multiplication. −2 × (−3) = 6 because reversing a backward direction makes it forward.
The same idea, five ways
keep the across position and reverse the height's sign.
A vertical reflection exchanges above and below the x-axis.
- (x, y) becomes (x, −y)
A horizontal mirror puts a point equally far on the opposite side, exchanging above and below.
Worked example
Reflect without changing the size
You need to reflect y = x across the x-axis. Keep each input and reverse only its height.
Show the steps and the answer
- At input 2 the identity gives (2, 2). Keep and change to , making .A reflection across the horizontal axis changes above to below at the same distance.
- At input the old point is . Its reflection is .A point starting below the axis moves equally far above it; the input remains −2.
- The new rule is . Draw it through (0, 0) and .Every old identity output x has been multiplied by −1, and two distinct points locate the resulting line.
- Reflected rule: y = −x.
- (2, 2) becomes (2, −2).
- (−2, −2) becomes (−2, 2).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The axis named in a reflection is the mirror. Across the x-axis, x stays fixed.
Part 4: Vertical shift
Think of lifting the entire ramp drawing without bending it. A vertical shift adds the same amount to every height. The difference between any two heights stays the same, so the slope stays the same.
- Rule: Adding b sends (x, y) to (x, y + b).
- Rule: b > 0 shifts up; b < 0 shifts down; b = 0 makes no vertical shift.
Reminder
Reminder: Signed addition
- Signed addition. 1 + (−3) = −2 means move three downward from 1.
The same idea, five ways
move every height by the same signed amount.
A vertical shift changes the intercept while preserving slope.
- g(x) = f(x) + b
- (x, y) becomes (x, y + b)
Lift a straight board without tilting it.
Worked example
Stretch by 3, then shift down 4: from y = x to y = 3x − 4
Start with the identity function y = x. Describe, in order, the transformations that turn its graph into the graph of y = 3x − 4. Say whether the heights stretch or compress, whether there is a reflection, and how far and in which direction the line shifts. Track the points (0, 0) and (1, 1) through each transformation and give where each one ends up.
Show the steps and the answer
- Sketch the identity function by plotting (0, 0) and (1, 1) and drawing the line through them.On y = x each output equals its input, so these two points are easy to locate, and two points fix a line. Tracking them through every change shows where the new line must go.
- Read from . Its size is , which is greater than 1, so stretch the heights by a factor of 3. (0, 0) stays at , and (1, 1) moves to . The graph is now .The coefficient m multiplies every output. When |m| > 1, each height moves farther from the x-axis, which is a vertical stretch and makes the line steeper. Multiplying a height of 0 still gives 0, so the origin stays fixed.
- Check the sign of m. Here is positive, so there is no reflection. The graph stays through (0, 0) and (1, 3).A reflection across the x-axis is part of the multiplication only when m < 0, because a negative multiplier flips the sign of every height. A positive multiplier keeps each point on the same side of the x-axis.
- Read and add it to every new height: and . The line slides down 4 units and becomes .b is added to the output after the multiplication, so every point moves the same vertical distance. Since b is negative, each point moves down, here by 4 units. Because all points move equally, the steepness stays 3 and only the y-intercept changes, from 0 to −4.
- Verify in the final formula. At , which matches . At , which matches .The tracked points must land on the target line. The order matters. Shifting first and then stretching would give y = 3(x − 4) = 3x − 12, which sends (1, 1) to (1, −3) and then to (1, −9) instead of (1, −1). Multiplying before the shift is what produces y = 3x − 4.
Work to write
- |m| = 3 > 1, so stretch vertically by a factor of 3
- (0, 0) stays at (0, 0) and (1, 1) → (1, 3) after multiplying heights by 3
- m = 3 > 0, so no reflection
- b = −4, so shift down 4 units
- (0, 0) → (0, −4) and (1, 3) → (1, −1)
- Check: 3(1) − 4 = −1, so (1, −1) lies on y = 3x − 4
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Outside addition moves the whole graph, so it does not change rise over run.
Part 5: A note on left and right shifts
You can slide a graph sideways too. When you move a point right h units, its new input address is the old input plus h. To use that new address in the old rule, subtract h first. This section's standard method needs vertical changes, but the source also mentions sideways changes.
- Rule: g(x) = f(x − h) shifts the old graph right h units when h > 0; h < 0 shifts it left.
- Rule: For a line, m(x − h) + b = mx + (b − mh), so a horizontal shift can also be described with a new vertical intercept.
Reminder
Reminder: Substitution
- Substitution. If f(u) = u, then f(x − 2) = x − 2; the whole new input replaces u.
The same idea, five ways
move each address right, then undo that move when reading the old rule.
Subtracting a positive amount inside the input shifts right; adding a positive amount shifts left.
- (x, y) becomes (x + h, y)
A relocated address is two blocks farther right, so subtract two to find its old address.
Worked example
Recognize a sideways shift
You need to describe g(x) = f(x − 2) when f(x) = x. Then move f(x) = 2x + 5 left 3 and find its new rule.
Show the steps and the answer
- Replace the old input by x − 2: .The identity rule outputs whichever input it receives.
- At the moved address .This plugs the new address back in to confirm the point moved from (0, 0) to (2, 0).
- Moving left 3 uses , so . Write .The new address must be increased by 3 to recover its old address.
- Replace the whole input in 2x + 5: .The factor 2 acts on the entire substituted input.
- Distribute: .Both parts of x + 3 are multiplied before the outside addition.
- The old point at x = 0 is (0, 5). Moving it left 3 gives (−3, 5). Substitute: .Plugging the moved address into the new rule verifies the shift direction.
- A shift right 2.
- For the identity line this also equals a shift down 2.
- Left-shift case: g(x) = 2x + 11.
- The old point (0, 5) becomes (−3, 5).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Verify an old point at its moved address when an inside sign feels backward.
5 How
- Sketch the identity function y = x using (0, 0) and (1, 1).
- Read |m|, the size of m without its sign, to decide whether heights stretch or compress.
- If m < 0, reflect the heights across the x-axis as part of that multiplication.
- Add b to every new height. Positive b moves up; negative b moves down.
- Verify a point in the final formula. Multiplication must occur before this stated shift.
Use transformations in formula order
- Start with y = x.
- Multiply its heights by m, interpreting size and sign separately.
- Add b to the new heights.
- Substitute one input in the final formula and compare.
6 Worked example
Worked example
Stretch, reflect, then shift: building y = −4x + 7 from y = x
The graph shows the line y = −4x + 7, which passes through (0, 7) and (2, −1). Build this line from the identity function y = x, whose graph passes through (0, 0) and (1, 1). List the changes in the order they must be made: say whether the heights stretch or compress and by what factor, whether there is a reflection, and how far and in which direction the line shifts. Follow the points (0, 0) and (1, 1) through every change, and finish by verifying one of the final points in the formula.
Show the steps and the answer
- Sketch the identity function through (0, 0) and (1, 1). From , read and .On y = x every height equals its input, so it is the plain line that every other line is built from. Matching y = −4x + 7 to y = mx + b shows what to multiply the heights by (m) and what to add to them (b).
- Drop the sign of m to get its size: . Because 4 > 1, the heights stretch by a factor of 4. (0, 0) stays at (0, 0) and (1, 1) rises to (1, 4), so the line is now .Stretch or compress depends on |m|, not on m. As a number −4 is less than 1, but its size is 4, so the heights get 4 times as far from the x-axis rather than closer to it. A height of 0 times 4 is still 0, which is why the origin does not move.
- Since is negative, reflect the stretched heights across the x-axis: (1, 4) flips to and (0, 0) stays where it is. The line is now .Multiplying by −4 is the same as multiplying by 4 and then changing each height to its opposite, so the reflection is part of the multiplication, not an extra move. Heights that were above the x-axis are now the same distance below it, so the line falls from left to right.
- Add to every height: (0, 0) moves up to (0, 7) and moves up to (1, 3). The line is now .b is positive, so every point moves up, and all by the same 7 units. Sliding the whole line does not change how steep it is; it only moves where the line crosses the y-axis, from 0 to 7.
- Verify a final point in the formula. At : , which matches (1, 3). At : , which matches (0, 7).The formula multiplies by −4 first and adds 7 second, the same order as the changes on the graph, so the tracked points must satisfy it. The order cannot be swapped: adding 7 first and then multiplying gives −4(1 + 7) = −32 at x = 1, which belongs to the line y = −4x − 28, not y = −4x + 7.
- Three changes, in this order: (1) stretch the heights of y = x by a factor of 4, because |−4| = 4 > 1
- (2) reflect them across the x-axis, because m = −4 is negative
- (3) shift every point up 7, because b = 7 is positive. The point (0, 0) stays at (0, 0) through the stretch and the reflection, then moves up to (0, 7). The point (1, 1) goes to (1, 4), then (1, −4), then (1, 3). The result is the line y = −4x + 7.
Work to write
- m = −4 and b = 7
- |m| = |−4| = 4 > 1, so the heights stretch by a factor of 4: y = x becomes y = 4x
- m < 0, so reflect across the x-axis: y = 4x becomes y = −4x
- b = 7 > 0, so shift up 7: y = −4x becomes y = −4x + 7
- (0, 0) ends at (0, 7); (1, 1) goes to (1, 4), then (1, −4), then (1, 3)
- Check: −4(1) + 7 = 3, so (1, 3) is on y = −4x + 7
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 3
Stretch only
You need to make y = 3x from y = x.
Show the steps and the answer
- Multiply every old output by 3; (1, 1) becomes (1, 3).The size 3 is greater than 1, so it stretches vertically.
- Keep (0, 0), and draw through (0, 0) and (1, 3).Multiplying height 0 by 3 keeps it 0.
Rung 2 of 3
Compress only
You need to make y = x from y = x.
Show the steps and the answer
- Multiply each height by ; (3, 3) becomes (3, 1).A factor between 0 and 1 pulls each height toward the x-axis.
- Draw through (0, 0) and (3, 1).The horizontal input positions stay unchanged.
Rung 3 of 3
Reflection, stretch and shift
You need to make y = −2x + 3 from the identity line.
Show the steps and the answer
- Multiply the height 2 at input 2 by to obtain .The negative sign reflects and the size 2 stretches.
- Add 3 to obtain , so the final point is .The upward shift comes after multiplying.
- The origin becomes (0, 3); draw the line through both final points.The point at input 0 checks the intercept independently.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: multiply, then move. That is the order used to evaluate mx + b.
- Use input 0 to catch an accidentally multiplied shift.
- Understand, then rebuild it when needed: the transformation description follows the equation's arithmetic; you do not need to memorize each graph.
7 The trap
Doing the stated downward shift first and then halving the heights. That produces (x − 3) = x − , a different line.
Lesson 4 of 10
Read a graph and write its equation
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture finding the instructions for a ramp after seeing only its drawing. First find where it crosses the upright axis. That gives its starting height. Next choose two marked addresses and count how far across and how far up you travel between them. Those changes tell you the slope. Put the starting height and slope into y = mx + b. If you are matching several drawings with equations, compare their starting heights first, then their directions and steepness. An increasing function climbs as you look from left to right. A decreasing function descends. A graph with a bigger slope size climbs or descends more for the same distance across.
2 Picture it
Reminder
Reminder: Slope, Substitution, Solving an equation, Signed subtraction, Reducing fractions
- Slope. From (0, 1) to (2, 5), rise 4 divided by run 2 gives m = 2.
- Substitution. If y = 2x + b and the point is (3, 8), write 8 = 2 × 3 + b.
- Solving an equation. 8 = 6 + b gives b = 2 by subtracting 6 from both sides; 6 + 2 = 8 checks it.
- Signed subtraction. 4 − 7 = −3, a downward change.
- Reducing fractions. = 2, because 8 ÷ 4 = 2.
3 Why
A line with a specified slope and y-intercept has only one possible graph: start at that intercept and repeat the required slope move. Therefore recovering m and b recovers its equation. If the intercept is not visible, any known point supplies the missing starting height through b = y − mx. When comparing steepness in a picture, the axes must use the same scales between graphs. Enlarging one axis alone can make a line appear steeper without changing its slope number.
4 The rule
Read b at (0, b), calculate , then write mx .
If b is hidden, use .
The same idea, five ways
read the starting height, then measure the climb per step across.
Two points on a graph let you recover the linear function that produced it.
- b = − m
- f(x) = mx + b
- m > 0: increasing
- m < 0: decreasing
- m = 0: constant
You infer a road's starting elevation and grade from two map markers.
The same idea, other ways
A graph through (0, 7) starts at 7. A second point (4, 4) tells you the output falls by 3 while the input rises by 4.
If slope is 2 and a point is (3, 8), substitute 8 = 2 × 3 + b. Subtracting 6 gives b = 2, and putting it back gives 8 = 6 + 2.
8 = 2 × 3 + b
Check: 8 = 6 + 2
Part 1: Increasing and decreasing directions
Think of walking right along a ramp. If your height grows, the function is increasing. If your height falls, it is decreasing. For a line, the sign of slope tells you which happens. These words always compare outputs while inputs increase.
- Rule: m > 0 makes a linear function increasing; m < 0 makes it decreasing.
- Rule: m = 0 gives constant outputs, so the function neither rises nor falls.
Reminder
Reminder: Signed subtraction
- Signed subtraction. 1 − (−2) = 3 is an upward change.
The same idea, five ways
when inputs grow, do the outputs grow or shrink?
A line's slope sign gives its direction from left to right.
- m > 0: increasing
- m < 0: decreasing
- m = 0: constant
Walking right on a ramp can carry you upward, downward, or at one height.
Worked example
Read direction from output changes
You need to decide whether y = 3x − 2 rises or falls as you move right, and compare it with y = −2x − 2.
Show the steps and the answer
- At inputs 0 and 1, the first rule gives and 1: and .Evaluate by substituting the inputs, multiplying, then subtracting.
- The output change is , for input change . The first function is increasing.Its output grows when input grows, so its positive slope describes a rightward climb.
- At inputs 0 and 1, the second rule gives and . Its output change is .A negative change means a lower ending height at a larger input.
- The second function is decreasing. Its slope is for this one-unit run.Decreasing means outputs get smaller when inputs get larger.
- y = 3x − 2: increasing.
- y = −2x − 2: decreasing.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Read direction from left to right, and distinguish output sign from slope sign.
Part 2: Match equations to labeled graphs
Think of identifying roads from their starting elevation and grade. First compare starting heights. When two roads start together, compare whether they climb or descend. If both climb, measure how much each climbs for the same trip across. A graph match needs all these clues to agree.
- Rule: Match y-intercept, slope sign, then slope size.
- Rule: Use matching axis scales when comparing steepness by appearance; calculating rise divided by run avoids scale guessing.
Reminder
Reminder: Subtracting a negative
- Subtracting a negative. −1 − (−2) = 1 finds D's rise.
The same idea, five ways
match the start, direction and climb per step.
The matching equation must reproduce both marked graph points.
- y = mx + b
- b = f(0)
- m =
Roads may start at one elevation but have different grades.
Worked example
Match lines that can share an intercept
You need to attach an equation to each labeled line. Line A passes through (0, −2) and (1, 1). Line B passes through (0, 4) and (1, 7). Line C passes through (0, −2) and (1, −4). Line D passes through (0, −2) and (3, −1). Match A, B, C and D to y = 3x − 2, y = 3x + 4, y = −2x − 2, and y = x − 2.
Show the steps and the answer
- Line B starts at height 4, so it matches y = 3x + 4. Its second point checks the slope: .Only that equation has intercept 4. The slope calculation checks that the remaining feature agrees too.
- A, C and D all start at . Intercept alone cannot distinguish them.The same starting height may belong to several different line directions.
- Line C falls to the right: . Match C to .The negative slope is the one falling option.
- Both A and D rise to the right. For A, . For D, .Both have positive slope and intercept −2. Counting rise and run distinguishes their steepness without guessing from the drawing.
- Match A to and D to .Their different slope numbers select different equations even though their intercept and direction match.
- B: y = 3x + 4.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- State each graph label with its full equation; direction alone is not a complete match.
5 How
- Read the y-intercept if it is shown. Confirm that the first coordinate is 0.
- Choose two clearly marked points. Keep their order the same in both subtractions.
- Compute rise divided by run and reduce the fraction.
- Write the slope and intercept in f(x) = mx + b.
- Substitute both points to verify the recovered equation.
Recover or match a line equation
- Find two readable points and compute slope.
- Find b from a visible y-intercept or from b = y − mx.
- For matching, compare b, slope sign, then slope size.
- Verify the chosen equation at a point other than the intercept.
6 Worked example
Worked example
Writing the equation of a line from its graph
The graph shows a straight line. It crosses the y-axis at the marked point (0, −2) and passes through the marked points (−4, −5) and (4, 1). Write the equation of the line in the form f(x) = mx + b. Read the y-intercept, find the slope from the two marked points (−4, −5) and (4, 1) and reduce it, write the function, and substitute both points to verify it.
Show the steps and the answer
- Read the y-intercept at the marked point , where the line crosses the y-axis. Its first coordinate is 0, so .b is the output when the input is 0, since f(0) = m · 0 + b = b. Confirming that the first coordinate is 0 makes sure the point lies on the y-axis and not merely near it.
- Choose the two marked points and (4, 1) and name them in a fixed order: and .Both points have exact labels, so nothing has to be estimated from the grid. Naming them before subtracting keeps the same order on the top and the bottom of the slope fraction. Mixing the order would flip the sign of the slope.
- Compute rise over run: .The slope is the change in output divided by the change in input. Subtracting a negative is the same as adding its opposite, so the rise is 1 + 5 = 6 and the run is 4 + 4 = 8. Dividing top and bottom by their common factor 2 reduces to . A positive slope fits the graph, which rises from left to right.
- Put and into mx : , which is written .In slope-intercept form the coefficient of x is the slope and the constant term is the y-intercept. Adding −2 is the same as subtracting 2.
- Substitute both points. , which matches . , which matches (4, 1).The slope came from these two points, but b came from a separate reading at (0, −2). Only one line passes through both points, so if both outputs match, the equation is that line. A misread intercept or a slip in the slope would make at least one output miss.
Work to write
- b = −2, read from the point (0, −2)
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 3
Graph through the origin
You need the equation through (0, 0) and (1, 1).
Show the steps and the answer
- and .The first point is the intercept and the second gives one up for one right.
- Write .Slope 1 and intercept 0 give y = 1x + 0.
Rung 2 of 3
A visible nonzero intercept
You need the equation through (0, 2) and (2, 6).
Show the steps and the answer
- and .Read the starting value and calculate the common rate.
- Write .These are the slope and intercept.
- At input 2, .Plugging the recovered values back in verifies the second point.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- When two graphs share an intercept, the larger |m| is steeper if their axes use matching scales.
- A graph that rises to the right is increasing; one that falls is decreasing. Check the sign before accepting your equation.
7 The trap
Subtracting the output coordinates in one direction and the input coordinates in the opposite direction. Write arrows between the two points, then use that same direction for both differences.
Lesson 5 of 10
Find where the line reaches the x-axis
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a ramp crossing a painted line on the floor. At the crossing, its height is zero. On a coordinate graph, the floor line is the x-axis. An x-intercept is the input where the graph has output 0, and its point looks like (x, 0). To find it, make the output equal to 0 and ask which input produces that output. You are finding where the line reaches the floor, so you do not set the across coordinate to 0. That would find the upright-axis crossing instead. A flat line above or below the floor never reaches it. A line lying on the floor has output 0 everywhere.
2 Picture it
Reminder
Reminder: Solving equations, Dividing by a fraction, Axis coordinates, Division by zero, Negative multiplication
- Solving equations. 0 = 5x − 10 becomes 10 = 5x, then x = 2; 5 × 2 − 10 = 0 checks it.
- Dividing by a fraction. 3 ÷ = 3 × 2 = 6 because six halves fit in 3.
- Axis coordinates. (6, 0) has height 0, so it is on the x-axis.
- Division by zero. 1 ÷ 0 has no value because 0 times any number is 0, never 1.
- Negative multiplication. (−) × (−) = 2; matching signs give a positive product.
3 Why
Every point on the x-axis has second coordinate 0. A point on the graph also obeys y = mx + b, so a crossing must obey 0 = mx + b. Subtract b to get −b = mx, then divide by m to obtain x = −. This division requires m ≠ 0. If m = 0, the output stays at b. A nonzero b never becomes 0, while b = 0 makes every input an intercept.
4 The rule
Set to find x-intercepts.
For mx with and the point is .
The same idea, five ways
find the input that makes the height zero.
The x-intercept is where the graph meets the horizontal axis.
- f(x) = 0
- mx + b = 0
- (x, 0)
The spot where a ramp reaches the floor has no height.
The same idea, other ways
For y = x − 1, the point (1, 0) sits on the horizontal axis. Its output is zero even though its input is not.
Evaluating f(6) asks what comes out of input 6. Solving f(x) = 0 reverses the question: the output is 0, so which input must go in?
5 How
- Replace the output f(x) or y with 0. This selects points lying on the x-axis.
- Solve the resulting equation for the input.
- Substitute that found input into the original function. Its output must be 0.
- State the input value and the coordinate point (x, 0).
- If m = 0, inspect the constant output instead of dividing by zero.
Find an axis crossing
- Choose the axis: output 0 for x-axis, input 0 for y-axis.
- For an x-intercept, solve mx + b = 0.
- Check the found input in the original formula.
- Include the 0 coordinate in the answer point.
6 Worked example
Worked example
Where f(x) = 5x + 8 reaches the x-axis
The graph shows the line f(x) = 5x + 8, which passes through the marked points (−2, −2), (−1, 3) and (0, 8). (a) Use the graph and the marked points to estimate where the line reaches the x-axis. Then find the x-intercept exactly by setting f(x) = 0, check it by substitution, and state it both as an x-value and as a point. (b) Keep the y-intercept 8 but change the slope to 0, giving g(x) = 0x + 8. Decide whether the graph of g reaches the x-axis, and explain why the rule x = − cannot be used for g.
Show the steps and the answer
- (a) Estimate from the graph. The marked point is below the x-axis and is above it, so the line crosses the x-axis between and , nearer to .The outputs −2 and 3 have opposite signs, so the line must pass through output 0 between those inputs. A line's output changes at a steady rate, so the crossing is nearer the input whose output is closer to 0, and −2 is closer to 0 than 3 is. Knowing the rough size and sign of the answer in advance makes a slip in the algebra easy to spot.
- Read the slope and y-intercept from : and . Since , the line is not horizontal.A line that is not horizontal crosses the x-axis exactly once. The solving below ends with a division by m, which is allowed only when m ≠ 0. A slope of 0 needs the different approach shown in part (b).
- Replace the output f(x) with 0: .Every point on the x-axis has output (height) 0, so the x-intercept is the input that makes the output 0.
- Subtract 8 from both sides: .This undoes the + 8 and leaves the x-term by itself. Doing the same thing to both sides keeps the equation true.
- Divide both sides by 5: , which is as a decimal.Dividing by 5 undoes the multiplication by 5. The result matches the rule x = − with b = 8 and m = 5. It is negative because b and m have the same sign.
- Substitute into the original function: .A point lies on the x-axis only when its output is 0. Getting exactly 0 confirms that no sign or arithmetic slip happened while solving.
- Compare with the estimate: lies between and , and it is nearer to .The exact value agrees with the graph. An answer of +1.6 would signal a sign error. For every positive x the output 5x + 8 is greater than 8, so the line is well above the x-axis to the right of the y-axis.
- State the result: the x-intercept is , and the line reaches the x-axis at the point .An x-intercept is a point on the x-axis, so its y-coordinate is 0 and its x-coordinate is the input just found. The question asks for both the value and the point.
- (b) Inspect g instead of dividing. Its slope is , and simplifies to , the same output for every input.The rule would give x = −, a division by zero, which has no value. When m = 0, the constant output alone decides whether the line touches the x-axis.
- Replace the output with 0: . This is false, and it contains no x that could be changed to make it true.Since g(x) equals 8 for every input, no input can make the output 0.
- Conclude: g has no x-intercept. Its graph is the horizontal line , which stays 8 units above the x-axis and never meets it.A horizontal line y = k reaches the x-axis only when k = 0. In that case it is the x-axis itself, so every point is on it. Here k = 8, which is not 0.
Work to write
- Estimate: between x = −2 and x = −1, since f(−2) = −2 and f(−1) = 3
- m = 5 ≠ 0
- 5x + 8 = 0
- x-intercept: (−, 0)
- g(x) = 0x + 8 = 8 for every x
- 8 = 0 is false, so g has no x-intercept
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 2
The intercept is the origin
You need the x-intercept of y = x.
Show the steps and the answer
- Set : , so .The identity output equals its input, so only input 0 gives output 0.
- Check the found input: .Substitution verifies the point's zero height.
Rung 2 of 2
A negative slope and negative intercept
You need the x-intercept of y = −x − 2.
Show the steps and the answer
- Set , then add 2 to get .This selects zero height and isolates the product.
- Multiply by : .The reciprocal of the coefficient is −, and their product is 1.
- Plug back in: .The two negative factors give a positive product; the found input truly reaches the axis.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: at an x-intercept, the other letter y is 0; at a y-intercept, the other letter x is 0.
- Write both the input and its point if the question's wording is unclear.
- Put on the cheat sheet: x = − requires m ≠ 0. You can rebuild it by solving 0 = mx + b.
7 The trap
Setting x = 0 to find the x-intercept. The axis name tells you which coordinate is allowed to vary: on the x-axis, x varies while y stays 0.
Lesson 6 of 10
Horizontal and vertical lines
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a shelf and a flagpole. Every place on the shelf has the same height, even when you move across it. A horizontal line does that: y stays fixed while x can vary. Every place on the flagpole has the same across position, even when you move up it. A vertical line does that: x stays fixed while y can vary. These descriptions tell you which letter belongs in each equation. A horizontal line is a function because each input gives one height. A vertical line gives several heights at the same input, so it is a line but not a function of x.
2 Picture it
HOY: Horizontal, 0 slope, Y equation
VUX: Vertical, Undefined slope, X equation
Reminder
Reminder: Coordinate order, Subtracting a negative, Zero in a fraction, Function requirement, Slope formula
- Coordinate order. In (7, 5), x = 7 and y = 5.
- Subtracting a negative. 5 − (−3) = 8 is the horizontal distance between those inputs.
- Zero in a fraction. = 0, while is undefined.
- Function requirement. One input may give one output: input 7 cannot give both 0 and 5 in a function.
- Slope formula. Slope = ; a rise of 0 over a run of 8 gives 0.
3 Why
For a horizontal line through two distinct points, the height change is 0 and the across change is nonzero, so slope = 0 divided by a nonzero number = 0. For a vertical line, the across change is 0 while the height changes. Its slope would divide by 0, which has no value. It also breaks the function requirement of one output per input. The vertical line test records that failure: a vertical probe meets more than one point.
4 The rule
A horizontal line has equation and slope 0.
A vertical line has equation , undefined slope, and is not a function of x.
The same idea, five ways
horizontal keeps height; vertical keeps across position.
A constant coordinate identifies a horizontal or vertical line.
- horizontal: y = c
- vertical: x = c
- horizontal: m = 0
- vertical: slope undefined
A shelf holds one height; a flagpole holds one across position.
Horizontal: y = −4, points (−3, −4) and (5, −4)
Vertical: x = 7, points (7, 0) and (7, 5)
The same idea, other ways
Walking horizontally changes only x. Walking vertically changes only y. The other coordinate must stay fixed.
The equation y = −4 assigns height −4 to every input. The equation x = 7 permits many heights at one input, so no single output rule can describe it as y = f(x).
| Line | Equation | Slope |
|---|---|---|
| Horizontal through (−3, 2) and (5, 2) | y = 2 | 0 |
| Horizontal through (−3, −4) and (5, −4) | 0 | |
| Vertical through (7, 0) and (7, 5) | x = 7 | undefined |
Part 1: Horizontal line
A horizontal line is like a level shelf. Its height is unchanged no matter how far you move left or right. A constant function gives that same output for every input. You can write it as f(x) = c or y = c.
- Rule: y = c = 0x + c has slope 0.
- Rule: Its y-intercept is (0, c). If c ≠ 0, it has no x-intercept.
- Rule: y = 0 is the x-axis itself, so every point on it has output 0.
Reminder
Reminder: Zero multiplication
- Zero multiplication. 0 × 7 − 4 = −4, which is why a constant function ignores the input.
The same idea, five ways
every input gets the same height.
A horizontal line is the graph of a constant function.
- y = c
- f(x) = c
- m = 0
Every spot on a level shelf is the same height.
Worked example
A level line through two points
You need the line through (−3, −4) and (5, −4).
Show the steps and the answer
- Both heights are , so write .The output stays constant while the input changes.
- Compute .There is no vertical change over the nonzero horizontal change.
- Check each point: its second coordinate is .The equation describes both original addresses.
- Slope: 0.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device HOY: Horizontal, slope 0, equation uses Y. A shelf's fixed height explains the Y.
Part 2: Vertical line
A vertical line is like a flagpole planted at one across position. Heights change but the across position never does. Its equation fixes x. Calling its slope undefined means there is no slope number, not a very large number and not zero.
- Rule: x = c has undefined slope because the run is 0.
- Rule: A vertical line fails the vertical line test and is not a function of x.
- Rule: x = c meets the x-axis at (c, 0). If c ≠ 0, it never meets the y-axis; x = 0 is the y-axis itself.
Vertical line: x = 7
Run between any two points: 0
Reminder
Reminder: Function requirement, Division by zero
- Function requirement. A rule assigning both 0 and 5 to input 7 is not a function.
- Division by zero. has no value because no number multiplied by 0 makes 5.
The same idea, five ways
every height uses the same across position.
A vertical line fixes the input and permits many outputs.
- x = c
- run = 0
- is undefined
Different places up a flagpole are all above its same base.
x = 7
(7, 0), (7, 5)
rise = 5, run = 0
slope: undefined
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device VUX: Vertical, Undefined slope, equation uses X. The flagpole fixes the across position.
5 How
- Compare the coordinates of two distinct points.
- If their y-values match, keep that output fixed: y = c.
- If their x-values match, keep that input fixed: x = c.
- Check both given points in the equation.
- Do not force a vertical line into y = mx + b.
Identify the fixed coordinate
- Read the coordinates of at least two distinct points.
- Keep the repeated coordinate letter and value in the equation.
- Compute rise and run if a slope is requested.
- Use the function requirement to decide whether it can be y = f(x).
6 Worked example
Worked example
Keep the correct coordinate fixed
You need equations for the horizontal line through (−3, −4) and (5, −4), and the vertical line through (7, 0) and (7, 5).
Show the steps and the answer
Horizontal: y = −4
Vertical: x = 7
- For the horizontal pair, both outputs are −4: .The second coordinate stays fixed, as on a shelf.
- Its slope is .Zero rise over a nonzero run is zero.
- For the vertical pair, both inputs are 7: .The first coordinate stays fixed, as on a flagpole.
- Its slope would be , so it is undefined.A zero denominator has no division value.
- Check the pairs in their equations: the first pair has , and the second pair has .Each equation must include both given points.
- Horizontal equation: y = −4.
- Horizontal slope: 0.
- Vertical equation: x = 7.
- Vertical slope: undefined.
- The vertical line is not a function of x.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use HOY and VUX, then check a supplied point to make sure the remembered letter fits.
- The y-axis x = 0 does not have one special crossing with itself. Every point on it is already on the y-axis.
7 The trap
Writing y = 7 for the vertical line. Say what stays fixed before choosing the letter. Fixed across position means x; fixed height means y.
Lesson 7 of 10
Compare parallel and perpendicular lines
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture two straight train tracks and two edges of a square tile. The tracks keep the same direction and never meet. Parallel lines do that. The tile's edges meet at a square corner, called a right angle, which measures 90 degrees, written 90°. Perpendicular lines do that. To compare equations, look at their slopes. Equal slopes keep the same slant. A perpendicular slope comes from turning the slant through a quarter turn, so the up-and-across movements trade roles and one direction changes sign. If two equations have both the same slope and the same starting height, they describe one line twice. Those are coincident lines, meaning the very same line.
2 Picture it
Reminder
Reminder: Isolating y, Fraction multiplication, Slope and intercept, Vertical lines, Reciprocals
- Isolating y. 6x − 2y = 8 becomes y = 3x − 4 by subtracting 6x and dividing every term by −2.
- Fraction multiplication. × (−2) = −1 because = −1.
- Slope and intercept. In y = 2x − 6, m = 2 and b = −6.
- Vertical lines. x = 7 has no slope number and must be handled separately.
- Reciprocals. × = 1; reversing one sign makes the product −1.
3 Why
For parallel nonvertical lines, subtracting outputs gives (mx + ) − (mx + ) = − . Their vertical separation stays constant and nonzero, so they cannot meet. For perpendicular lines, a right-angle turn changes a move right r and up s into a move left s and up r. The new slope is , the negative reciprocal of . This argument needs nonzero finite slopes. A horizontal and a vertical line still make a right angle, but the vertical slope is undefined.
4 The rule
Nonvertical lines are parallel when and ; coincident when both match.
Lines with finite nonzero slopes are perpendicular when . Horizontal and vertical lines are perpendicular.
The same idea, five ways
the same direction and different lines means parallel; a square corner means perpendicular; the same drawing twice means coincident.
Slopes identify the relationship once vertical-line exceptions are handled.
- parallel: = , ≠
- coincident: = , =
- perpendicular: = −
Rail tracks keep a gap; square-tile edges make a right angle.
The same idea, other ways
For y = x + 1 and y = x − 2, the first output is always 3 larger. Matching slopes make that gap stay fixed.
A move right 2, up 1 has slope . Turn it through a right angle to get left 1, up 2, with slope −2. The product × (−2) is −1.
Slopes 3 and − give product −1. Slopes 3 and −3 give product −9, so opposite signs alone are not enough.
3 × () = −1: perpendicular
3 × (−3) = −9: neither parallel nor perpendicular
Part 1: Parallel lines
Parallel lines keep the same direction and never meet. For nonvertical lines, the starting heights must differ as well as the slopes matching. Distinct vertical lines are also parallel because their fixed across positions differ.
- Rule: y = mx + and y = mx + are parallel if ≠ .
- Rule: x = a and x = c are parallel if a ≠ c.
Reminder
Reminder: Slope-intercept form
- Slope-intercept form. In y = 3x − 4, the slope is 3 and the intercept is −4.
The same idea, five ways
same direction, different lines.
Parallel lines do not share any point.
- vertical case: x = a and x = c, a ≠ c
Two straight rails never join.
Worked example
Equal slopes with a real gap
You need to decide whether y = x + 1 and y = x − 2 are parallel.
Show the steps and the answer
- Both slopes are 1, and their intercepts are 1 and .Their directions match but their starting heights differ.
- Their output difference is .A nonzero gap at every input means no shared point.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Parallel slopes match, then check that the intercepts differ.
Part 2: Coincident lines
Coincident lines are one line described twice, like two transparent copies laid exactly on top of each other. Every point of one is on the other. They are not two separated tracks.
- Rule: Equal slopes and equal intercepts give coincident lines.
- Rule: Different-looking equations can describe the same line after simplification.
Reminder
Reminder: Division on both sides
- Division on both sides. 2y = 4x + 6 becomes y = 2x + 3 after every term divides by 2.
The same idea, five ways
the same line twice.
Coincident lines share all their points.
- y = x + 1 and 2y = 2x + 2
Two identical tracings overlap completely.
Worked example
Different writing, same line
You need to compare y = 2x + 3 and 2y = 4x + 6.
Show the steps and the answer
- Divide every term of the second equation by 2: .Balanced division reveals its slope and intercept.
- Both slopes are 2 and both intercepts are 3.They have the same start and the same movement.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: coincide means occupy the same place.
Part 3: Perpendicular lines and negative reciprocals
A negative reciprocal means the flip with its sign reversed. A reciprocal alone is the number that multiplies the old number to make 1. Changing its sign makes the product −1. That is the slope needed for a right-angle meeting when neither slope is zero or undefined.
- Rule: For nonzero m, the negative reciprocal is −.
- Rule: becomes −; 3 becomes −; − becomes 6.
- Rule: A horizontal line and a vertical line are perpendicular without a slope-product calculation.
Reminder
Reminder: Reciprocals, Fraction signs
- Reciprocals. × = 1 because numerator and denominator both equal 10.
- Fraction signs. The negative reciprocal of a negative slope is positive: − becomes 6.
The same idea, five ways
flip a nonzero slope, then reverse its sign.
Perpendicular nonvertical lines have slopes whose product is −1.
- becomes −
Turning a ramp a quarter turn exchanges rise and run and reverses one direction.
Worked example
Flip and reverse the sign
You need the perpendicular slope when the original slope is , and when it is −.
Show the steps and the answer
Each pair multiplies to −1
- For , flip to , then change the sign to .The flip makes a product of 1; changing its sign makes −1.
- Check: .The product verifies the perpendicular relationship.
- For , flip to , then change its sign to 6. Check .A negative slope has a positive negative reciprocal.
- For : −.
- For −: 6.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Check the product before accepting a perpendicular slope.
- A picture can distort a right angle if one horizontal unit and one vertical unit have different screen lengths. Use the slope test or equal axis scales.
5 How
- Rewrite each nonvertical equation with y alone so its slope is visible.
- Equal slopes and different intercepts mean parallel lines.
- Equal slopes and equal intercepts mean coincident lines.
- Otherwise multiply the slopes. A product of −1 means perpendicular lines.
- Handle a vertical line separately: it is perpendicular to a horizontal line, and parallel to another distinct vertical line.
Classify two lines
- Isolate y in each nonvertical equation.
- Check equal slopes and then intercepts.
- For unequal finite nonzero slopes, multiply and compare with −1.
- Check horizontal/vertical pairs separately.
6 Worked example
Worked example
Sort four lines into the pair that never meets and the pair that meets squarely
Four lines are given by a(x) = 3x − 2, b(x) = −3x + 7, c(x) = x + 1 and d(x) = 3x + 4. Which two never meet, and which two cross at a right angle?
Show the steps and the answer
- Read each slope from the coefficient of x: a has 3, b has , c has , d has 3.In slope-intercept form the slope is the number multiplying x, and slope is what decides parallel and perpendicular.
- a and d share the slope 3 and have different intercepts, and 4.Two lines with the same slope rise at the same rate, so they never meet unless they are the same line; different intercepts rule that out.
- Multiply the slopes of b and c: .Two nonvertical lines are perpendicular exactly when their slopes multiply to −1.
- Try the other pairs: and , neither is , and no other pair shares a slope.Checking every pair, not only the likely ones, is what makes the answer complete.
- Parallel: a and d.
- Perpendicular: b and c.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Matching slopes and different starts
You need to decide whether y = 5x + 8 and y = 5x − 3 are parallel, perpendicular, coincident, or neither.
Show the steps and the answer
- Both coefficients of x are 5, so the slopes match.The equations already have y alone, making the slope numbers visible.
- The intercepts are 8 and , which differ. The lines are parallel.Equal slopes give the same direction; different starting heights make them distinct.
- .The x terms cancel, leaving a nonzero gap at every input.
- Parallel.
- Both slopes are 5; intercepts are 8 and −3.
Rung 2 of 4
Different-looking equations of one line
You need to compare y = −x + 6 with 7y = −4x + 42.
Show the steps and the answer
- Divide every term of the second equation by 7: .Equal division preserves the same line points and isolates y.
- , so the second equation becomes .Seven groups of 6 total 42, so the constants match too.
- The slopes and intercepts both match. These equations are coincident.Matching direction and placement describe the same line, rather than separated parallel lines.
Rung 3 of 4
A fraction pair needs both tests
You need to decide whether y = x − 5 and y = −x + 11 are perpendicular.
Show the steps and the answer
- The slopes are and , and they are unequal.Unequal slopes rule out parallel and coincident lines.
- Multiply: .The top products and bottom products both equal 24; the signs differ.
- The lines are perpendicular.Finite nonzero slopes with product −1 make a right-angle meeting.
Rung 4 of 4
Isolate y and handle an undefined slope
You need two classifications. First compare 8x + 3y = 29 with y = x − 17. Then compare x = 9 with y = −8.
Show the steps and the answer
x = 9: vertical
y = −8: horizontal
Meeting point: (9, −8)
Perpendicular by directions
- Subtract 8x from both sides of 8x + 3y = 29: .This removes the x term from beside y so the slope can be exposed.
- Divide every term by 3: .Division leaves y alone and must apply to both terms on the other side.
- The first pair has slopes and . Their product is .This uses the slopes of the rewritten equations, rather than the coefficient 8 before y was isolated.
- The first pair is perpendicular.The finite nonzero slope product passes the right-angle test.
- The second pair is a vertical line and a horizontal line . They meet at .One fixes the first coordinate, and the other fixes the second coordinate.
- The second pair is also perpendicular. Do not form a slope product.The directions form a square corner, but the vertical line has no slope number to multiply.
- First pair: perpendicular.
- Second pair: perpendicular, with meeting point (9, −8).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Equal slopes need the intercept check; opposite signs need the product check.
- State the relationship and the numbers that prove it on an exam.
7 The trap
Changing only the sign or only flipping the fraction for a perpendicular slope. Both moves are needed, and the product must be −1.
Lesson 8 of 10
Write a parallel or perpendicular line through a point
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture choosing a road's direction and then moving it until it passes through your house. The direction alone does not pick one road; many separated roads can share it. The house address finishes the choice. For a parallel line, keep the given slope. For a perpendicular line, use its negative reciprocal. Then use the supplied point to find the starting height. Point-slope form is a way to write this immediately: measure every new point's across and upward changes from the supplied point. Those changes must follow the chosen slope. You can leave the answer in that form or expand it to y = mx + b.
2 Picture it
Reminder
Reminder: Slope from two points, Negative reciprocal, Point-slope form, Distribution, Solving for the intercept, Multiplying signed numbers
- Slope from two points. From (−2, 6) to (4, 5), run = 4 − (−2) = 6 and rise = 5 − 6 = −1.
- Negative reciprocal. − becomes 6; their product is −1.
- Point-slope form. Through (4, 5) at slope 6: y − 5 = 6(x − 4).
- Distribution. 6(x − 4) = 6x − 24 because 6 multiplies both terms.
- Solving for the intercept. 5 = 24 + b gives b = −19; plugging back gives 5 = 24 − 19.
- Multiplying signed numbers. (−) × (−3) = 1, so distributing the negative slope can produce a positive constant.
3 Why
If the line must pass through (, ), its slope equation is m = for other points with a different input. Multiplying gives y − = m(x − ). This equation also includes the supplied point because both changes are 0 there. It is point-slope form. Alternatively substitute that point in y = mx + b and solve for b. Both methods force the chosen slope and the required point to belong to one line.
4 The rule
Choose m equal to the given slope for a parallel line, or for a perpendicular line with nonzero finite given slope.
Through , use .
The same idea, five ways
choose the direction, then anchor it at the supplied address.
One point and one slope determine one nonvertical line.
- b = − m
- parallel: m =
- perpendicular: m = −
Slide a road with the correct direction until it passes through your house.
The same idea, other ways
Through (1, 7) at slope 3, every new rise y − 7 equals three times the new run x − 1. That gives y − 7 = 3(x − 1).
rise from the point = slope × run from the point
Write y = 3x + b and insert (1, 7): 7 = 3 + b, so b = 4. Plug back in: 3 × 1 + 4 = 7.
Part 1: Parallel through a point
Keep the old line's slope, then adjust the starting height until the new line reaches the required address. If that address is already on the old line, this construction gives the old line itself; a distinct parallel line cannot pass through a point of the old line.
- Rule: A parallel construction uses the same slope.
- Rule: b = − m selects the intercept that fits the point.
- Rule: Different intercepts are required for distinct parallel lines.
Reminder
Reminder: Distribution, Substitution
- Distribution.
- Substitution. The point (1, 7) means use x = 1 and y = 7 together.
The same idea, five ways
keep the direction and find the starting height.
A parallel line through a point outside the given line has the same slope and a different intercept.
- m =
Move a straight rail sideways without turning it.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Same slope does not mean same intercept. Use the point to find the intercept.
Part 2: Perpendicular through a point
Turn the direction through a right angle, then use the address to position the turned line. For an ordinary nonzero slope, the direction change is flip and sign. The supplied point fixes the intercept after that change.
- Rule: Use the negative reciprocal, then solve for the new intercept.
- Rule: Perpendicular to y = c through (p, q) is x = p.
- Rule: Perpendicular to x = c through (p, q) is y = q.
Reminder
Reminder: Negative reciprocal, Signs
- Negative reciprocal. 3 = becomes −.
- Signs. (−) × (−3) = 1 because two negative factors give a positive product.
The same idea, five ways
turn the direction, then fit the address.
The new line makes a right angle and passes through the required point.
- = −
- y − = (x − )
Turn a street into a cross street that passes through one location.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Check the slope product and the point separately. Either condition can fail on its own.
5 How
- Find the original slope from its equation or from two points.
- Choose the new slope: same for parallel, negative reciprocal for perpendicular.
- Insert the new slope and the required point in point-slope form, or use b = − m.
- Expand and isolate y if slope-intercept form is wanted.
- Plug the supplied point into the final equation and check the slope relationship.
Write the requested related line
- Find the given slope.
- Decide same direction or right-angle direction.
- Choose the new slope or the appropriate horizontal/vertical equation.
- Anchor the new line at the supplied point.
- Check the point and relationship in the original conditions.
6 Worked example
Worked example
Lines through P(−4, −1) parallel and perpendicular to x + 2y = 6
The graph shows the line x + 2y = 6, which crosses the axes at (0, 3) and (6, 0), and the point P(−4, −1), which is not on the line. (a) Write, in slope-intercept form, an equation of the line through P that is parallel to x + 2y = 6. (b) Write, in slope-intercept form, an equation of the line through P that is perpendicular to x + 2y = 6. Check each answer by substituting P and by comparing slopes.
Show the steps and the answer
- Find the given slope. Solve for y. Subtract x from both sides to get . Divide every term by 2 to get . So . The marked points (0, 3) and (6, 0) agree: .In y = mx + b the coefficient of x is the slope, so the equation has to be solved for y first. Rise over run between any two points on the same line gives that same slope.
- Choose the new slopes. (a) Parallel: keep the same slope, so . (b) Perpendicular: . The reciprocal of is , and changing its sign gives 2. Test: .Parallel lines rise at the same rate, so they share a slope. Two lines with nonzero, finite slopes are perpendicular exactly when the product of their slopes is −1, and the negative reciprocal is the slope that makes that product −1.
- Insert each slope and into . (a) , which is . (b) , which is .Point-slope form gives the line with slope m through (, ) directly. Subtracting a negative coordinate is the same as adding, so y − (−1) becomes y + 1 and x − (−4) becomes x + 4.
- Expand and isolate y. (a) and , so . Subtract 1 to get . (b) and , so . Subtract 1 to get .Slope-intercept form is wanted. Distribute the slope over (x + 4), then subtract 1 from both sides so that y stands alone.
- Check with P and with the slopes. (a) . The slope matches the given line, and the y-intercept differs from 3. (b) , and .Each new line must contain P, so x = −4 has to return y = −1. A parallel answer must keep the slope without being the same line. A perpendicular answer must give a slope product of −1.
Work to write
- 2y = −x + 6, so y = −x + 3 and = −
- Parallel: m = −
- Perpendicular: m = −1 ÷ (−) = 2, since (−)(2) = −1
- (a) y + 1 = −(x + 4), so y = −x − 3
- (b) y + 1 = 2(x + 4), so y = 2x + 7
- Check: −(−4) − 3 = −1 and 2(−4) + 7 = −1
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 3
Parallel with a fractional slope
You need a line parallel to y = x − 1 through (3, 4).
Show the steps and the answer
- Keep and write .The point must fit the new slope.
- Subtract 2: . Plug back in: .This determines and verifies the starting output.
- Write .Same slope and different intercepts give the parallel relationship.
Rung 2 of 3
Perpendicular to a negative slope
You need the perpendicular line to y = −x + 4 through (2, −1).
Show the steps and the answer
- The negative reciprocal is . Substitute .A negative original slope gives a positive perpendicular slope.
- Subtract 5 to obtain b = −6. Plug back in: .The required point selects and verifies the intercept.
- Write .The chosen direction is now positioned correctly.
Rung 3 of 3
Horizontal and vertical exceptions
You need the perpendicular line to y = 1 through (−4, 9), and the perpendicular line to x = 7 through that same point.
Show the steps and the answer
Given point: (−4, 9)
Against y = 1: x = −4
Against x = 7: y = 9
- Perpendicular to the horizontal is vertical. Through , keep x fixed at .Horizontal and vertical directions make a square corner; no reciprocal of zero is needed.
- Perpendicular to the vertical is horizontal. Through , keep y fixed at 9.The undefined vertical slope is handled by direction instead of division.
- Check the required point has and .Both constructed equations must contain that point.
- Perpendicular to y = 1: x = −4.
- Perpendicular to x = 7: y = 9.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Underline the supplied point; it belongs to the requested line.
- Use point-slope form to avoid losing the point while expanding.
- If the point is on the old line and distinct parallel lines are requested, no such line exists; the same-slope construction is coincident.
7 The trap
Using the old slope in a perpendicular problem, or using the old intercept after changing the slope. Choose the direction first, then use the new point to find the new intercept.
Lesson 10 of 10
Use an intersection to find break-even
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture selling notebooks at a table. Before you sell anything, you pay for the table. Each notebook also costs money to make. Cost is all the money you spend. Revenue is all the money customers pay you. The break-even point is where those two amounts match: sales have paid for the expenses, and no profit remains yet. Profit means revenue minus cost, the amount left after expenses. On a graph, quantity goes across and dollars go up. The cost and revenue lines meet at break-even. Their common height is the dollar amount, while the across coordinate tells you how many items you must sell.
2 Picture it
Reminder
Reminder: Linear model, Decimal division, Systems, Substitution, Parallel lines, Signed subtraction
- Linear model. A $10 fixed fee plus $3 per item is 10 + 3x.
- Decimal division. 25,000 ÷ 0.01 = 2,500,000 because multiplying both numbers by 100 makes the divisor 1.
- Systems. C(x) = R(x) selects a shared output at the same input.
- Substitution. R(5) = 5 × 5 = 25 when the selling-price rule is R(x) = 5x.
- Parallel lines. Equal rates and different starting fees keep the same gap at every input.
- Signed subtraction. 20 − 22 = −2, a deficit of 2; 15 − 14 = 1, an excess of 1.
3 Why
If fixed cost is F and each item costs v to produce, total cost is C(x) = F + vx: the starting expense plus x repeated item expenses. If each sells for p, revenue is R(x) = px. Equating them gives F = (p − v)x. The difference p − v is each sale's contribution toward the fixed expense. Once enough contributions cover F, cost equals revenue. A positive fixed cost cannot be covered by sales when p ≤ v, because each contribution is zero or negative.
4 The rule
vx, px, and profit .
Break-even satisfies . For F > 0 and p > v, .
The same idea, five ways
find how many sales pay for all the expenses.
At the break-even point, revenue equals cost and profit is zero.
- C(x) = F + vx
- R(x) = px
- C(x) = R(x)
Each sale puts a little money toward paying back the table fee.
The same idea, other ways
At break-even, the cost and revenue graphs have the same dollar height at the same quantity.
If an item sells for $5 and costs $3 to make, each sale leaves $2 toward a $10 setup fee. Five sales contribute 5 × $2 = $10.
Part 1: Cost function
Fixed cost is a bill you pay once even if you make no items. Variable cost changes with quantity, such as buying paper for each notebook. A cost function adds those two expenses. In a linear model, per-item production cost is the cost slope, and fixed cost is the initial value.
- Rule: C(x) = F + vx.
- Rule: Fixed cost F is paid at quantity 0; variable cost vx grows with quantity.
- Rule: Production models usually use x ≥ 0, with whole-number quantities for individual items.
Reminder
Reminder: Order of operations, Initial value
- Order of operations. 10 + 3 × 4 = 10 + 12 = 22.
- Initial value. C(0) = 10 is the starting expense before production.
The same idea, five ways
starting bill plus the bill for each item.
Total cost combines fixed and variable cost.
- fixed cost: F
- variable cost: vx
- C(x) = F + vx
- C(0) = F
The table fee plus the paper bill for your notebooks.
Worked example
Build a small cost model
You need the cost rule for a $10 setup fee and $3 per item, then the cost of 4 items.
Show the steps and the answer
- Write .The fixed cost is paid once, and per-item cost repeats x times.
- .Four item expenses total 12 before adding the setup fee.
- C(x) = 10 + 3x.
- C(4) = $22.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The fixed bill belongs outside the multiplication by quantity.
Part 2: Revenue function
Revenue is the money coming in from sales before subtracting expenses. If each item sells for the same price, multiply the number sold by that price. Receiving money is different from keeping money; some of the revenue pays the cost.
- Rule: R(x) = px when each of x items sells for price p.
- Rule: In this model R(0) = 0 because no sales bring in no money.
Reminder
Reminder: Repeated addition
- Repeated addition. 5 × 4 is four payments of 5.
The same idea, five ways
sale price times number sold.
Revenue records total sales money before expenses.
- R(x) = px
- R(0) = 0
The contents of the payment box before paying the bills.
Worked example
Separate sales money from profit
You need revenue from selling 4 items at $5 each.
Show the steps and the answer
- Write .The same selling price repeats for each item.
- .This is sales money before paying production or setup expenses.
- R(x) = 5x.
- R(4) = $20.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Revenue means money in; profit means money left after cost.
Part 3: Break-even, profit and loss
At break-even, all the sales money pays all the bills. Profit is zero. If revenue is larger, the difference is profit. If revenue is smaller, the negative difference records a loss. For item sales, use only quantities that make sense in the situation. Sometimes the graphs meet between two whole counts. You cannot sell part of an individual item, so, when each sale brings in more than it costs to make, the first whole count above that crossing is the first that covers the cost.
- Rule: Solve C(x) = R(x) to find break-even.
- Rule: P(x) > 0 means profit; P(x) < 0 means loss; P(x) = 0 means break-even.
- Rule: With a positive fixed cost and selling price no greater than per-item cost, there is no nonnegative break-even quantity.
- Rule: A continuous model permits every nonnegative real input, including fractions between whole counts. A fractional break-even input is a crossing in that model. For whole items, there is no exact break-even count unless that input is whole; the next whole count is the first with nonnegative profit when p > v.
Reminder
Reminder: System of equations, Signed subtraction
- System of equations. Cost equals revenue uses the same method as setting two line outputs equal.
- Signed subtraction. 20 − 22 = −2 records a loss of 2.
The same idea, five ways
money in minus money spent tells what remains.
Break-even has no profit and no loss because cost equals revenue.
- P(x) = 0
- R(x) > C(x): profit
- R(x) < C(x): loss
You have paid back the table fee when each sale's contribution has added up to it.
Worked example
A small break-even point
You need the number of $5 sales that cover a $10 setup fee and $3 production cost per item. Then repeat the interpretation if the setup fee is $5 instead of $10.
Show the steps and the answer
- Set .The same quantity must make cost and revenue equal.
- Subtract 3x: . Divide by 2 to find .Each sale contributes $2 toward the fixed fee.
- Plug in: and .Both original dollar amounts must match at the found quantity.
- Compute .The equality means no money remains after expenses.
- For a $5 setup fee, set 5 + 3x = 5x. Subtract 3x to get 5 = 2x and divide by 2: .Equality finds the continuous-model crossing, even when it falls between actual whole-item counts.
- Plug in 2.5: and .Substitution confirms the model's fractional crossing; 2.5 is exact, not rounded.
- At 2 whole items, profit is . At 3, profit is .Only whole sales counts are allowed. Two sales still lose money; the next whole count, 3, covers the expense.
- With the $10 setup fee: 5 items.
- Cost = revenue = $25.
- Profit = $0.
- With a $5 setup fee: the model crosses at 2.5 items.
- Model cost = revenue = $12.50.
- There is no exact whole-item break-even.
- Three sales first give nonnegative profit, namely $1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Label the two coordinates with units so you do not exchange quantity and dollars.
5 How
- Define the input quantity and its units; count sold items as nonnegative whole numbers.
- Put fixed expense at the cost intercept and per-item expense at the cost slope.
- Put selling price at the revenue slope, with revenue 0 before any sales.
- Set cost equal to revenue and solve for the quantity.
- Plug the quantity into both functions, then report quantity and dollars together.
- Compare revenue with cost to tell profit from loss.
- If the calculated quantity is between whole items, the model has no exact whole-item break-even. When each sale contributes a positive amount, use the next whole count to reach nonnegative profit.
Build and solve a break-even model
- Identify fixed cost F, per-item cost v and sale price p.
- Write C(x) = F + vx and R(x) = px.
- Set F + vx = px, then solve for x.
- Plug the found quantity into both functions.
- Report quantity, common dollar amount and zero profit.
- If whole items are required, distinguish an exact whole crossing from a fractional model crossing.
6 Worked example
Worked example
Break-even for a craft-fair bracelet table
A school art club rents a table at a one-day craft fair to sell friendship bracelets. The table rental is a flat $22, the materials for each bracelet cost $2, and the club sells each bracelet for $6. Let x be the number of bracelets sold. The graph shows the club's cost line, which meets the vertical axis at (0, 22) and passes through (8, 38). (a) Write the cost function C(x) and the revenue function R(x), and confirm that C(x) fits both marked points. (b) Sketch the revenue line on the same axes and estimate where the two lines cross. (c) Find the break-even point exactly by setting C(x) = R(x). Check it in both functions, and give both the quantity and the dollar amount. (d) Compare revenue with cost on each side of the break-even point. Bracelets are sold only in whole numbers, so decide whether the club can break even exactly. Then find the fewest bracelets it must sell so that its profit is not negative.
Show the steps and the answer
- Let the number of bracelets sold during the fair. Since x counts bracelets, the real sales are whole numbers , 1, 2, 3, …, and both C(x) and R(x) are measured in dollars.Cost and revenue must use the same input and the same money unit before they can be compared, and a club cannot sell a negative or fractional bracelet.
- The $22 table fee is owed even if nothing sells, so the cost intercept is . Each bracelet adds $2 of materials, so the cost slope is . This gives . Check it against the graph: and . The slope between the marked points is .A fixed expense is the cost at x = 0, which is where a line meets the vertical axis. A per-item expense is how much the cost rises for each extra item, which is the slope.
- Each bracelet brings in $6, and no sales bring in $0, so . Sketch this line on the same axes through (0, 0), (5, 30) and (10, 60).Revenue is price times quantity, so its line starts at the origin and its slope is the selling price p = 6.
- Read the sketch. At the revenue line sits $22 below the cost line. At the revenue line is at 30 and the cost line is at 32, so revenue is still lower. At they are at 36 and 34, so revenue is now higher. The lines cross between 5 and 6 bracelets, at a height a little above $30.Break-even is where the two lines meet, and a graph estimate gives a target that the exact answer must agree with. The $22 gap shrinks by 6 − 2 = $4 for each bracelet, so it takes a little more than 5 bracelets to close it.
- Set cost equal to revenue: . Subtract 2x from both sides: . Divide both sides by 4: .Where the lines intersect they have the same height, so the two expressions are equal there. The result matches the rule x = = = 5.5, because each bracelet earns $4 toward the $22 fee.
- Put into both functions: and . The lines meet at (5.5, 33). That is 5.5 bracelets, with $33 of cost and $33 of revenue.Equal outputs confirm that 5.5 solves the equation, and the shared output is the dollar coordinate. A break-even point is reported as a quantity together with its dollars.
- Profit is . For x < 5.5, P(x) < 0, so R(x) < C(x) and the club has a loss. For x > 5.5, P(x) > 0, so R(x) > C(x) and the club has a profit. On the graph, the revenue line lies below the cost line to the left of the crossing and above it to the right.The sign of R(x) − C(x) tells profit from loss, and which line is on top shows the same thing on the graph.
- 5.5 lies between the whole counts 5 and 6, so no whole number of bracelets breaks even exactly. At and , a $2 loss. At and , a $2 profit. Each bracelet adds $4 to profit, so every count from 6 upward is profitable. The club must sell at least 6 bracelets.Only whole bracelets can be sold. When each sale contributes a positive amount, profit increases with x, so the next whole count above the break-even quantity is the fewest sales with nonnegative profit.
Work to write
- x = number of bracelets sold; x = 0, 1, 2, …
- C(x) = 22 + 2x
- R(x) = 6x
- 22 + 2x = 6x
- 22 = 4x, so x = = 5.5
- C(5.5) = 22 + 2(5.5) = 33 and R(5.5) = 6(5.5) = 33
- Break-even point (5.5, 33): 5.5 bracelets and $33
- x = 5: R(5) = 30 < C(5) = 32, a $2 loss
- x = 6: R(6) = 36 > C(6) = 34, a $2 profit
- No exact whole-bracelet break-even; sell at least 6 bracelets
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
A small setup bill
You need to find how many sales cover a $6 setup fee when each item costs $2 to make and sells for $5. Assume each item made is sold.
Show the steps and the answer
- Write and .The one-time bill starts the cost; repeated item costs and sale prices multiply the quantity.
- Set .This selects a quantity at which money spent equals money received.
- Subtract 2x from both sides: .Each sale contributes 5 − 2 = 3 dollars toward the setup bill.
- Divide by 3: .This finds how many $3 contributions cover the $6 fixed expense.
- Check and .Both original rules must return the same dollar amount.
- 2 items.
- Cost = revenue = $10.
- Break-even point: (2, 10).
- Profit: $0.
Rung 2 of 4
Prices with decimals
You need the break-even quantity with an $84 setup fee, production cost $1.50 per item, and sale price $3.25 per item. Assume every item produced is sold.
Show the steps and the answer
- Write and . Set .A common input must give equal costs and revenue at break-even.
- Multiply every term by 100: 8,.This clears the two-place decimal coefficients and scales the fixed fee too.
- Subtract 150x: 8,.The remaining coefficient corresponds to each sale's $1.75 contribution, measured in cents.
- Divide by 175: , because ,400.This finds the quantity paying the setup bill.
- Check .The original cost formula verifies the total expense.
- Check .The original revenue formula gives the same total, so the solved count works.
- 48 items.
- Cost = revenue = $156.
- Break-even point: (48, 156).
Rung 3 of 4
A fraction is not a sale count
You need the model crossing and the first whole-item count covering costs when setup is $19, production is $4 per item, and sale price is $7. All produced items are sold.
Show the steps and the answer
- Write and , then set .The equality selects equal dollar amounts at the same quantity.
- Subtract 4x: . Divide by 3: .Each sale contributes $3, and six contributions do not yet cover $19.
- At the model input , and .Equal thirds verify the continuous-model crossing exactly, without rounding.
- At 6 items, and . Profit is .The lower whole count has not covered costs.
- At 7 items, and . Profit is .The next whole count covers costs because each extra sale adds a positive $3 contribution.
- Model crossing: (, ).
- No exact whole-item break-even exists.
- First whole count covering costs: 7 items.
- At 7 items: cost $47.
- At 7 items: revenue $49.
- At 7 items: profit $2.
Rung 4 of 4
Sales that cannot cover the bill
You need to decide whether a $21 setup fee can be covered if each item costs $4 to make. Check a $4 sale price, then a $3 sale price. Assume all produced items are sold and x is nonnegative.
Show the steps and the answer
- With a $4 sale price, and . Set .Break-even still asks for equal dollar outputs.
- Subtract 4x from both sides: . There is no solution.The contribution is $4 − $4 = $0, so no sale pays any part of the positive setup bill.
- Check : cost is , revenue is 8, and profit is .The original formulas show the same unpaid setup bill; it remains at every quantity.
- With a $3 sale price, use R(x) = 3x. Set 21 + 4x = 3x, then subtract 4x: .Each sale now costs $1 more than it brings in.
- Divide by : . Reject this input because item quantity must be 0 or greater.The algebraic crossing lies outside the context's domain, so it is not a break-even sales count.
- Plug into both algebraic formulas: and . Then check an allowed quantity: and .The first check verifies the algebra but does not make negative items meaningful. The allowed count still loses money.
- For every allowed x, profit is .The initial loss of $21 grows as nonnegative quantity grows; no allowed input breaks even.
- Sale price $4: no break-even quantity.
- Sale price $3: no nonnegative break-even quantity.
- The algebraic crossing at x = −21 is outside the allowed sales domain.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: break-even means the difference breaks even at 0.
- Before solving, say what x counts and what each output measures.
- Understand, then rebuild it when needed: the formula F ÷ (p − v) comes from cost equals revenue; the reason matters more than memorizing the division.
- Know cold
Coordinate order: across, then up or down; x comes before y.
Slope: rise over run.
Axis crossings: the other coordinate is 0.
HOY: Horizontal, 0 slope, Y equation. VUX: Vertical, Undefined slope, X equation.
Parallel: match slopes, compare intercepts. Perpendicular: flip and sign, then check product −1, except horizontal against vertical.
System solutions: shared input, shared output. - Understand, then rebuild it when needed
Tables come from substituting inputs, so you do not need to memorize individual coordinates.
Transformation order comes from multiplication before addition.
An x-intercept comes from solving output = 0.
A line through a point comes from measuring changes from that point.
An intersection comes from equal outputs.
Break-even comes from cost equals revenue. - Put on the cheat sheet
y = mx + b.
m = , ≠ .
y − = m(x − ).
b = − m.
x-intercept: x = −, m ≠ 0.
Perpendicular slope: −, m ≠ 0 and slope finite.
C(x) = F + vx; R(x) = px; profit = R(x) − C(x).
Break-even: C(x) = R(x).
These are also the compact printable formulas for this section. For the closed-book exam, practice rebuilding each from its reason.
7 The trap
Confusing the shared revenue with profit. At break-even both cost and revenue can be large, but profit is their difference, which is 0.