College Algebra / Absolute value functions
Absolute value functions
All 10 lessons, in order.
The unit at a glance
- Absolute value measures distance
Imagine your home at 0 on a straight road.
- Distance from a center and tolerance
Now put your home at 5 instead of zero.
- Build and read the V graph
Picture your distance from a bus stop as you walk toward it and keep going.
- Write an equation from a graph
A graph can tell you the recipe that made it.
- Solve an absolute value equation
Suppose you must stand exactly eight blocks from a sign on a straight road.
- Find zeros and axis intercepts
On a road map, an intersection is where two routes meet.
- Less than B means between
Imagine a dog on a leash attached to a post on a straight path.
- More than B means outside
Picture a safety zone around a construction site on a straight road.
- Use boundaries and graphs to find positive or negative outputs
Picture a road crossing sea level.
- When B is zero or negative
Before choosing between or outside, compare the requested distance with zero.
Rules (10)
- Absolute value measures distance
|x| = x when x ≥ 0; |x| = −x when x < 0. Nonnegative means zero or positive. Opposite means the same distance from zero on the other side: the opposite of −7 is 7. Always |x| ≥ 0, and |x| = 0 exactly when x = 0. A piecewise function chooses one instruction according to the input: use the first line for zero or positive inputs, the second for negative inputs.
- Distance from a center and tolerance
Distance between two real numbers A and B is |A − B| = |B − A|. Here A and B name the two positions. For an allowed distance r ≥ 0 from center c, at most r means |x − c| ≤ r, with ends c − r and c + r included. Strictly less than r means |x − c| < r, with the ends excluded. Exactly r means |x − c| = r. At least r means |x − c| ≥ r. More than r means |x − c| > r. The sign ± is read plus or minus: c ± r names the lower limit c − r and upper limit c + r. If r = 0, the two end positions coincide at c; an exact zero distance has only that one position.
- Build and read the V graph
For f(x) = a|x − h| + k with a ≠ 0: a is the number multiplying the distance, h is its horizontal center, and k is the outside added height. Vertex: (h, k). Left slope: −a; right slope: a. It opens up if a > 0 and down if a < 0. Domain: all real numbers. Range: y ≥ k if a > 0; y ≤ k if a < 0.
- Write an equation from a graph
Vertex form is f(x) = a|x − h| + k. From vertex (h, k) and another point (p, q) with p ≠ h: a = , where horizontal distance = |p − h|. For an upward V, width at height D above the corner is 2D ÷ a, with D > 0. An x-intercept, or horizontal intercept, is a point (x, 0); its input is called a zero.
- Solve an absolute value equation
Isolate |A| = B first. For B > 0, solve A = B or A = −B. For B = 0, solve A = 0. For B < 0, there is no solution. These give two, one, or no inputs when A = mx + c and m ≠ 0. Check every input in the original equation.
- Find zeros and axis intercepts
Zeros: solve f(x) = 0 to find the inputs whose output is zero. Their x-intercepts are (x, 0). y-intercept: evaluate f(0) and write (0, f(0)). In a|x − h| + k with a ≠ 0: opposite signs for a and k give two x-intercepts; k = 0 gives one; the same nonzero sign gives none. The full V always has exactly one y-intercept.
- Less than B means between
For B > 0: |A| < B means −B < A < B; |A| ≤ B means −B ≤ A ≤ B. Both comparisons must hold: 'and'. A is everything inside the bars; B is the number on the other side.
- More than B means outside
For B > 0: |A| > B means A < −B or A > B; |A| ≥ B means A ≤ −B or A ≥ B. For an inside line with a nonzero number multiplying x, solve each alternative and join its two outside intervals with ∪.
- Use boundaries and graphs to find positive or negative outputs
Find boundaries by solving the corresponding equality. Test one input inside each interval between boundaries, or compare graph heights. For f(x) < 0, choose the portions below the x-axis; for f(x) > 0, choose those above. Negative multiplication or division flips every comparison sign. Allow a boundary only when its original comparison permits equality.
- When B is zero or negative
If B < 0: |A| = B, |A| < B, and |A| ≤ B have no solution; |A| > B and |A| ≥ B hold for every allowed input. If B = 0: |A| = 0 and |A| ≤ 0 mean A = 0; |A| < 0 has none; |A| > 0 means A ≠ 0; |A| ≥ 0 holds for every allowed input.
Recipes (10)
- Absolute value measures distance
- Calculate the entire expression inside the bars without changing its individual signs.
- If the result is zero or positive, keep it.
- If it is negative, use its opposite, the positive number the same distance from zero.
- Finish outside operations afterward. A number beside the bars multiplies: 3|x + 2| means 3 × |x + 2|.
- Distance from a center and tolerance
- Choose a letter for the actual value, such as x, a resistance R, a score S, or a temperature T. Identify the center c.
- Find the permitted distance r. For a percent tolerance, multiply the size of the stated rating by the percent divided by 100.
- Read the words carefully. At most, no more than, and ends included use an equality bar under the comparison. Strictly less than and strictly more than leave the end out.
- Write |actual value − center|, then the comparison and distance.
- Locate the two positions c − r and c + r. Nearby means the stretch between them. Farther away means the left side or the right side beyond them. Exactly that distance means the two end positions.
- Keep the units. Use a closed, filled dot or a bracket for an included end; use an open, hollow dot or a parenthesis for an excluded end.
- Build and read the V graph
- Set the entire inside equal to 0 and solve. This finds the input where its distance is zero, the corner's x-coordinate.
- Put that input into the full formula to find the corner's y-coordinate, then plot the corner.
- Choose one and two units on each side. Substitute all four inputs into the full formula, especially when a number multiplies x inside the bars.
- Draw an input and output table, plot its five points, connect each side with a straight arm, and extend the arms.
- Read domain as the graph's reach across the x-axis and range as its reach up the y-axis. For a limited input stretch, check both ends and the corner if it lies inside.
- Write an equation from a graph
- Read the corner from the grid: its horizontal position is h and its height is k.
- Write f(x) = a|x − h| + k, leaving the stretch factor a unknown.
- Read another clear point (p, q). Go to the x-axis to read p and to the y-axis to read q.
- Subtract the corner height k from q and divide by the horizontal distance |p − h|. This finds the stretch factor a.
- Put the resulting a into the formula and check it at a second point.
- For a requested x-intercept, find where the drawing reaches height 0. Algebraically, set the output to 0 to find its input. A positive distance from h has one position on each side, h minus that distance and h plus it.
- Solve an absolute value equation
- Get the bars and their complete contents alone. Undo addition or subtraction outside first, then multiplication or division.
- Name A, everything inside the bars, and B, the number on the other side. Inspect B before splitting.
- For B > 0, write A = B or A = −B. For B = 0, write only A = 0. For B < 0, stop with no solution.
- Solve each possible equation by undoing the inside operations. This finds the inputs that produce the required inside values.
- Substitute each possible answer into the original equation. Keep only inputs that make both sides equal.
- Write the answer as inputs and as a set. {−7, 3} lists two answers. {4} lists one answer. ∅ means the empty set, no answers, and can also be written { }. Braces collect answers; a comma separates them.
- Find zeros and axis intercepts
- For zeros or x-intercepts, set the output f(x) equal to 0. This asks which inputs place the graph on the horizontal axis.
- Isolate the bars. Inspect B, the number on the other side, to determine whether two, one, or no inside equations are possible.
- Solve each possible equation to find the zero inputs. Substitute each input into the original formula to confirm output 0.
- List zeros as numbers or an answer set. List x-intercepts as points with y-coordinate 0.
- For the y-intercept, substitute x = 0 into the original formula and calculate the output. Write the point (0, f(0)).
- Less than B means between
- Get the bars alone, then check that B, the number on the other side, is positive. Zero or negative B needs the final lesson's cases.
- Write the three part inequality with −B on the left and B on the right. Keep equality if the question allows it.
- Undo each inside operation on all three parts. Dividing by a negative reverses both signs.
- Read the finished bounds from smaller to larger and write the interval.
- A strict sign excludes the endpoint: use a hollow dot and a parenthesis. An inclusive sign allows equality: use a filled dot and a bracket. Check the center and both endpoints in the original question.
- More than B means outside
- Get the bars alone and inspect B, the number on the other side. Use this method when B is positive.
- Write the left outside inequality and the right outside inequality, connected by 'or'. Each alternative is a branch.
- Solve each branch separately. Multiplying or dividing by a negative flips that branch's comparison sign.
- Put the resulting intervals in order from left to right and join them with ∪.
- Infinity is a direction, not an actual endpoint, so it always uses a parenthesis. At each finite boundary, an actual number, use a bracket only when equality passes the original comparison.
- Use boundaries and graphs to find positive or negative outputs
- Decide which heights to compare, such as f(x) and 0, or |x − 5| and 4.
- Set the two heights equal and solve. This finds every input at which the graph reaches the comparison height. Substitute those inputs back to confirm the crossings.
- List the open intervals separated by those boundary inputs. Open means the boundary itself is not part of the interval being tested.
- Pick one test point inside each interval and substitute it into the original comparison.
- Keep every interval whose test point passes. Include a boundary only if substituting it into the original comparison passes too.
- State the allowed inputs as an inequality, interval, or set-builder condition. If more than one interval works, use 'or' and ∪.
- When B is zero or negative
- Get the absolute value alone. In an inequality, negative multiplication or division flips the sign. In an equation, equality remains equality.
- Inspect B, the number on the other side, after that isolation.
- If B is negative, equality or a smaller distance is impossible. A greater distance accepts every allowed input.
- If B is zero, decide whether the sign requires equality, excludes zero distance, or allows every nonnegative distance.
- For a required zero distance, solve A = 0 to find the center input. Substitute it back to confirm distance zero. For positive distance, exclude exactly the inputs where A = 0.
- If B is positive, use two equations for equality, between for a smaller distance, or outside for a greater distance. Check the answer in the original problem.
Traps (10)
- Absolute value measures distance
Making individual numbers positive before finishing the inside changes the problem. In |−3 + 5|, the wrong calculation |3 + 5| gives 8; the correct inside is 2, so the answer is 2. In |2 − 9|, changing subtraction to addition gives 11; the correct inside is −7, so the answer is 7.
- Distance from a center and tolerance
The center and permitted distance have different jobs. In |R − 680| ≤ 34, 680 names the rating, while 34 says how far the measurement may depart from it.
- Build and read the V graph
Reading x − 3 as a left shift. Find where the inside is zero: x − 3 = 0 gives x = 3, so the corner moved right. The memory device is 'inside lies, outside tells the truth'; the zero calculation explains it.
- Write an equation from a graph
Dividing by p − h instead of |p − h|. A point left of the corner has a negative coordinate difference, but its distance is positive. Keep the bars so a correctly records whether the V opens up or down.
- Solve an absolute value equation
Splitting before isolating, or keeping only the positive branch. In 3|x + 2| − 4 = 11, the needed distance is 5, not 11. Box the isolated equation, then choose its branches.
- Find zeros and axis intercepts
Substituting x = 0 when asked for zeros. That finds the y-intercept. For zeros set the output to 0 and leave x unknown.
- Less than B means between
Changing only the middle of a three-part inequality, or treating < and ≤ alike. Every algebra move acts on all three parts, and the original sign decides whether the boundary belongs.
- More than B means outside
Using 'and' for an outside condition. No x can be both less than −4 and greater than 3. Use 'or', and use ∪ to keep both permitted pieces.
- Use boundaries and graphs to find positive or negative outputs
Multiplying by −2 and keeping the less than sign would select the center, where this function is positive. Flip the sign immediately and confirm your answer with an actual output from each chosen interval.
- When B is zero or negative
Using the formulas for B positive before checking the isolated limit. |x − 6| > −2 is true for every real x, so it does not need a pair of boundary equations.
Lesson 1 of 10
Absolute value measures distance
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Imagine your home at 0 on a straight road. You can walk six blocks right to 6 or six blocks left to −6. Your direction changes, but your trip is six blocks long either way. Absolute value asks for that length. The two upright marks in |x| are called absolute value bars. Read |x| aloud as the absolute value of x. They ask for the distance from x to zero on a number line, a road of numbered positions. A distance can be zero if you stay home. It cannot be negative. Finish every operation inside the bars before measuring that distance. Then do the operations outside them.
2 Picture it
Reminder
Reminder: Order of operations, A number beside bars
- Order of operations. Grouping first, multiplication next, addition last: 2|3 − 5| + 1 = 2|−2| + 1 = 2 × 2 + 1 = 5.
- A number beside bars. 3|x + 2| means 3 × |x + 2|, so at x = 0 it is 3 × |2| = 6.
3 Why
To the right of zero, the number already tells you the distance, so |x| = x when x ≥ 0. To the left, the number carries a minus sign for direction. Multiplying that number by −1 reverses its direction and gives its positive length, so |x| = −x when x < 0. For x = −6, −x means −(−6) = 6. The bars do not erase individual signs inside an unfinished calculation. They measure the result of the whole calculation.
4 The rule
when ; when x < 0.
Nonnegative means zero or positive. Opposite means the same distance from zero on the other side: the opposite of is 7. Always , and exactly when . A piecewise function chooses one instruction according to the input: use the first line for zero or positive inputs, the second for negative inputs.
The same idea, five ways
Say the absolute value of x.
Absolute value measures how far x is from zero, without its direction.
- |x|
- |x| = x when x ≥ 0
- |x| = −x when x < 0
- |x| ≥ 0
An address says which side of home; a measuring tape says how far.
The same idea, other ways
A sign says which side of zero you are on. Absolute value counts how many unit gaps separate the destination from zero.
A measuring tape reads the length between two spots. Turning the tape around does not change a six-unit length: |−6| = |6| = 6.
|6| = 6
|0| = 0
A piecewise function selects an instruction using a condition on the input. For x ≥ 0, keep x. For x < 0, use −x. These instructions cover every real input and both give zero or a positive distance.
|x| = x, when x ≥ 0
|x| = −x, when x < 0
The column under −5 shows output 5 because −(−5) = 5. The column under 5 also shows 5. The column under 0 shows 0 because no movement separates zero from itself.
Part 1: Nonnegative input
On the right side of home, your position already says how far you walked. Zero stays zero.
- For x ≥ 0, |x| = x.
- Nonnegative means positive or zero.
Worked example
A positive position and home
Find |4| and |0|.
What it asks. Measure each input's distance from zero.
Show the steps and the answer
The plan. Both inputs are zero or positive, so keep each input.
- Plan. Both inputs are zero or positive, so keep each input.
- Zero uses the first piecewise line.
- Four unit gaps separate 4 from 0.
- .4 is already four units to the right of zero.
- .Zero is no distance from itself.
- |4| = 4.
- |0| = 0.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The equals bar in x ≥ 0 includes zero in this instruction.
Part 2: Negative input
On the left side of home, your position includes direction. Its opposite gives the length of the trip.
- For x < 0, |x| = −x.
- −x means the opposite of x.
Worked example
The opposite of a negative
Find |−5| using the piecewise rule.
What it asks. Use the correct piecewise instruction to measure the distance of −5 from zero.
Show the steps and the answer
The plan. Test the sign of the input, then replace x in −x with (−5).
- Plan. Test the sign of the input, then replace x in −x with (−5).
- −5 is negative, so use the second line.
- The opposite of a negative is positive.
- , so use .The negative-input instruction applies to positions left of zero.
- .Taking the opposite of the negative input −5 gives positive 5, the length from −5 to zero.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use parentheses around a negative substituted number.
Part 3: Multipliers and minus signs outside the bars
A sign or number outside the bars waits for the distance to be calculated. Think of measuring a length before doubling it or assigning its opposite. The measured length itself stays nonnegative, even when the completed expression becomes negative.
- 3|x + 2| means 3 × |x + 2|.
- −|u| is the opposite of the completed distance |u|; u here names the inside number.
- Outside multiplication comes before outside addition.
Worked example
A multiplier and an addition outside
Find 2|3 − 5| + 1.
What it asks. Calculate a distance, double it, and then add 1.
Show the steps and the answer
The plan. Follow the grouping from inside outward.
- Plan. Follow the grouping from inside outward.
- 3 − 5 is −2.
- Only the distance is doubled.
- , so .The inside subtraction must finish first.
- , so the expression is .The distance from −2 to zero is 2.
- .Outside multiplication comes before addition.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Underline the entire inside before doing anything outside.
5 How
- Calculate the entire expression inside the bars without changing its individual signs.
- If the result is zero or positive, keep it.
- If it is negative, use its opposite, the positive number the same distance from zero.
- Finish outside operations afterward. A number beside the bars multiplies: 3|x + 2| means 3 × |x + 2|.
Evaluate an expression with absolute value bars
- Find the one number inside the bars.
- Use its distance from zero.
- Complete outside multiplication, then outside addition or subtraction.
6 Worked example
Worked example
Calculate first, measure second
Find |−3 − 4| and then −|−3 − 4|.
What it asks. Find the value of the first expression, then find its opposite in the second expression.
Show the steps and the answer
The plan. Keep the subtraction inside unchanged. Calculate its result, measure the distance, and apply the outside minus sign last.
- Plan. Keep the subtraction inside unchanged. Calculate its result, measure the distance, and apply the outside minus sign last.
- The first minus sign is part of the input −3. The second asks you to subtract 4.
- An outside minus sign acts after the bars.
- .Starting three blocks left and moving four more left puts you at −7.
- .The location −7 is seven blocks from zero.
- .The minus sign outside the bars acts after the distance has been found.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Inside first, distance second, outside last.
- For a piecewise function, test the input against the conditions and use only the instruction it satisfies.
- A distance has size, while its original sign tells direction. Zero is an allowed distance.
7 The trap
Making individual numbers positive before finishing the inside changes the problem. In |−3 + 5|, the wrong calculation |3 + 5| gives 8; the correct inside is 2, so the answer is 2. In |2 − 9|, changing subtraction to addition gives 11; the correct inside is −7, so the answer is 7.
Lesson 2 of 10
Distance from a center and tolerance
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Now put your home at 5 instead of zero. To find how far you are from home, compare your position x with 5. The subtraction x − 5 says which side of home you are on and how far. Taking its absolute value keeps the distance. This makes |x − 5| the distance from the center 5. The same idea describes a manufactured part allowed to be a little too small or a little too large. That allowed difference is its tolerance. You name the center, measure the distance, and compare it with the permitted amount. This lets one statement cover departures in both directions.
2 Picture it
Reminder
Reminder: Subtracting a negative, Endpoint notation, Set-builder notation
- Subtracting a negative. x − (−6) = x + 6. Keep parentheses around a negative center before simplifying.
- Endpoint notation. A filled dot and bracket include an end. A hollow dot and parenthesis leave it out: [7, 11] includes 7 and 11; (7, 11) leaves both out.
- Set-builder notation. {x | x ≥ 5} and {x : x ≥ 5} both mean all x such that x ≥ 5. A colon helps distinguish set notation from absolute value bars.
3 Why
Subtracting the center makes its own position count as zero difference: at x = 5, x − 5 = 0. At x = 8 the difference is 3; at x = 2 it is −3. Both positions are three units away. Reversing the subtraction reverses the direction, while the bars keep the distance. Thus |x − 5| = |5 − x|. To stay within an allowed distance r of a center c, you cannot go below c − r or above c + r. This follows by walking r units each way from c.
4 The rule
Distance between two real numbers A and B is .
Here A and B name the two positions. For an allowed distance from center c, at most r means , with ends and included. Strictly less than r means , with the ends excluded. Exactly r means . At least r means . More than r means . The sign is read plus or minus: names the lower limit and upper limit . If , the two end positions coincide at c; an exact zero distance has only that one position.
The same idea, five ways
Say the distance between x and c. Read |x − c| as the absolute value of x minus c.
Subtract the center, then measure the size of the difference.
Move the home address before measuring how far away a house is.
The same idea, other ways
Start at 5 and walk 3 right to 8. The difference 8 − 5 is 3, so |8 − 5| = 3. A walk 3 left reaches 2 and gives |2 − 5| = 3.
The output is the size of the difference. In the table, the columns under 2 and 8 both show 3 because these positions are equally far from 5.
A part can be slightly smaller or larger than its intended size. A tolerance puts a limit on the distance between the measured size and the intended center.
| Words | Absolute value statement, r > 0 | Street picture |
|---|---|---|
| Exactly r; at a distance of r | Only c − r and c + r | |
| At most r; no more than r; within r, ends included | Between the ends, both included | |
| Less than r; strictly within r | Between the ends, both left out | |
| At least r; no closer than r | Outside either end, ends included | |
| More than r; farther than r | Outside either end, ends left out | |
| c ± r; margin of error r | Between c − r and c + r, ends included |
Part 1: Distance from a center
Subtract the address of home before measuring how far away you are. Either order of subtraction gives the same distance.
- Distance from c is |x − c|.
- |x| ≤ 4 means within or including four units of zero: −4 ≤ x ≤ 4, the interval [−4, 4].
Worked example
Compare two subtraction orders
Find the distance between 1 and 5.
What it asks. Find the length of the trip between positions 1 and 5.
Show the steps and the answer
The plan. Subtract the positions and measure the size of that difference, then reverse the subtraction to check.
- Plan. Subtract the positions and measure the size of that difference, then reverse the subtraction to check.
- Keep the subtraction inside intact.
- Distance has no negative sign.
- .Moving from 5 to 1 changes position by −4 but travels four units.
- .Reversing the trip changes its direction but keeps its length.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Either subtraction order gives the same distance once the bars are applied.
Part 2: Absolute tolerance
A tolerance stated in centimeters tells you directly how far a measured length may differ from the intended center. Think of a marked ruler with a short acceptable stretch on each side of 3.5 cm. Two hundredths can be added or subtracted because lengths have decimal parts too.
- At most 0.02 from 3.5: |x − 3.5| ≤ 0.02.
- The boundary values are included when the maximum error is allowed.
Worked example
A bolt within two hundredths
A bolt must be within 0.02 cm of 3.5 cm, ends included. Write the condition and limits.
What it asks. Find the acceptable bolt lengths, including their two limits.
Show the steps and the answer
The plan. Write distance from 3.5, then walk 0.02 cm below and above the center.
- Plan. Write distance from 3.5, then walk 0.02 cm below and above the center.
- Within, ends included means at most.
- Write 3.5 as 3.50 when subtracting hundredths.
- .The bars measure the distance of the actual length from the intended 3.5 cm center; at most permits the maximum difference.
- and .The two positions exactly two hundredths from 3.5 mark the acceptable ends.
- Write , or [3.48, 3.52].Every length between the ends is close enough, and both ends are allowed.
- 3.48 ≤ x ≤ 3.52 cm
- Interval: [3.48, 3.52] cm
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Keep the same measurement unit in the center, allowed distance, and answer.
Part 3: Percent tolerance
A percent tolerance makes the permitted difference depend on the stated rating. Five percent of a larger rating is a larger amount. A resistor is a part that limits how much electricity flows, and ohms measure its resistance. A capacitor stores electric charge, an electrical amount. Its capacitance is stored charge per unit of voltage, the electrical push. Only the measurements and units matter for this calculation.
- Nominal value means the intended rating; actual value means the measured value.
- Tolerance distance = size of rating × percent ÷ 100.
- Resistance and capacitance are different measurements; use the units given.
- A tolerance ±p% permits the same percentage below and above the rating. Common stated tolerances include ±1%, ±5%, and ±10%.
Center: 680 ohms
Allowed distance: 34 ohms
646 ≤ R ≤ 714
Reminder
Reminder: Percent
- Percent. 2% = = 0.02. Multiply the center's size by this fraction.
Worked example
A two percent tolerance
A 250-unit rating allows 2% variation. Find the limits.
What it asks. Find the smallest and largest allowed values for a 250-unit rating.
Show the steps and the answer
The plan. Convert 2% of 250 to units, then subtract and add that amount.
- Plan. Convert 2% of 250 to units, then subtract and add that amount.
- Percent is a fraction out of 100.
- Both ends are permitted.
- units.Multiplying the rating by two hundredths gives its permitted distance.
- Write .The measured value may differ from the rating by no more than 5 units.
- and , so .Walking the allowed distance each way locates the included ends.
- Allowed difference: 5 units.
- Allowed values: [245, 255].
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Convert the percent to a measured distance before writing the bars.
Part 4: Negative centers and plus or minus
The home address can be negative. Subtract that entire address before measuring. Plus or minus, written ±, gives two directions from a center. For a tolerance it names a lower and an upper allowed limit. For a short list such as ±2, it names the numbers 2 and −2.
- Distance from −2 is |x − (−2)| = |x + 2|.
- 680 ± 34 gives limits 646 and 714.
- ±2 means 2 and −2.
- A margin of error is the largest stated distance allowed from a reported value.
- A percentage point is a change of 1 in a percentage number: 52% to 53% changes by one percentage point. A margin stated in percentage points uses subtraction of these numbers, rather than a percent of the center.
Reminder
Reminder: Subtracting a negative
- Subtracting a negative.
Worked example
Within three of negative two
Describe all numbers within 3 of −2, including the ends.
What it asks. Find the permitted positions near a center left of zero.
Show the steps and the answer
The plan. Subtract the negative center correctly, then locate the two end positions by walking 3 each way.
- Plan. Subtract the negative center correctly, then locate the two end positions by walking 3 each way.
- x minus negative 2 becomes x + 2.
- The allowed ends are included.
- Write , which is .The difference must be measured from center −2, and the distance can be at most 3.
- The left end is . The right end is .These positions are exactly three units each way from the center.
- All positions between the ends work: , or .They are no farther from −2 than the included two ends.
- |x + 2| ≤ 3
- Interval: [−5, 1]
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Put a negative center in parentheses until the subtraction is simplified.
5 How
- Choose a letter for the actual value, such as x, a resistance R, a score S, or a temperature T. Identify the center c.
- Find the permitted distance r. For a percent tolerance, multiply the size of the stated rating by the percent divided by 100.
- Read the words carefully. At most, no more than, and ends included use an equality bar under the comparison. Strictly less than and strictly more than leave the end out.
- Write |actual value − center|, then the comparison and distance.
- Locate the two positions c − r and c + r. Nearby means the stretch between them. Farther away means the left side or the right side beyond them. Exactly that distance means the two end positions.
- Keep the units. Use a closed, filled dot or a bracket for an included end; use an open, hollow dot or a parenthesis for an excluded end.
Translate a distance statement
- Identify the actual value, center, and permitted distance.
- Write the absolute value of actual value minus center.
- Choose the sign using the exact words.
- Use the street endpoints center minus distance and center plus distance to describe allowed positions.
6 Worked example
Worked example
A resistor's permitted resistance
A resistor has nominal resistance 680 ohms, ±5%. Express its allowable actual resistance R using absolute value and an interval.
What it asks. Find how far the measured resistance may depart from 680, and write all the allowed values.
Show the steps and the answer
The plan. Convert five percent to an allowed distance. Walk that distance below and above 680, including both ends.
- Plan. Convert five percent to an allowed distance. Walk that distance below and above 680, including both ends.
- Nominal value is the stated rating. Actual value is the measured number.
- ±5% permits the same percentage below and above the rating.
- Let R be the actual resistance in ohms. The center is 680 ohms.R names the measurement that varies, while 680 is the fixed rating.
- 5% .Percent means out of one hundred.
- ; then ohms.Five hundredths of 680 is the permitted distance from the rating.
- Write .The distance from the actual measurement to its rating can be at most 34 ohms.
- The lower end is . The upper end is .Walking 34 units either way from the center finds the two furthest allowed values.
- Write , or the interval [646, 714].Every value between these limits is close enough, and the equals bar includes both limits.
- 646 ≤ R ≤ 714 ohms
- Interval: [646, 714] ohms
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 6
Exactly six from a negative center
Describe all numbers exactly 6 from −1.
What it asks. Find the two positions whose distance from −1 is exactly 6.
Show the steps and the answer
The plan. Write the distance statement, then walk six units each way from the center.
- Plan. Write the distance statement, then walk six units each way from the center.
- Subtracting −1 gives x + 1.
- Exactly uses an equals sign.
- Write , or .The center is −1 and the required distance is 6.
- Walk left to and right to .On a straight line these are the two positions at that exact positive distance.
- |x + 1| = 6
- x = −7 or x = 5
- Set: {−7, 5}
Rung 2 of 6
At most two from nine
Describe all numbers at most 2 from 9.
What it asks. Find the stretch of nearby positions, including the allowed limit.
Show the steps and the answer
The plan. Walk two units each way from 9 and keep the stretch between the ends.
- Plan. Walk two units each way from 9 and keep the stretch between the ends.
- At most permits equality.
- Nearby positions lie between the two ends.
- Write .At most 2 means distance 2 or less from center 9.
- The two end positions are and .They are the furthest permitted positions on the two sides.
- Keep , or [7, 11].Every position between them is no farther than 2, including the two ends.
- 7 ≤ x ≤ 11
- Interval: [7, 11]
Rung 3 of 6
Strictly less than half a unit
Describe all numbers less than 0.5 from 12.
What it asks. Find nearby positions with the two maximum-distance ends excluded.
Show the steps and the answer
The plan. Locate 12 minus and plus 0.5, then keep positions strictly between them.
- Plan. Locate 12 minus and plus 0.5, then keep positions strictly between them.
- Less than leaves out equality.
- Half a unit is 0.5.
- Write .The distance must be smaller than the stated half unit.
- The end positions are and .These are exactly half a unit from the center.
- Keep 11.5 < x < 12.5, or (11.5, 12.5).The two ends have distance exactly 0.5 and must be left out, while every position between them is nearer.
- 11.5 < x < 12.5
- Interval: (11.5, 12.5)
Rung 4 of 6
At least five from twelve
Describe all numbers at least 5 from 12.
What it asks. Find faraway positions in either direction, including distance exactly 5.
Show the steps and the answer
The plan. Locate the positions five each way from 12, then keep the outward sides.
- Plan. Locate the positions five each way from 12, then keep the outward sides.
- At least allows equality.
- Nearer positions in the middle fail.
- Write .The phrase at least requires distance 5 or greater.
- The two boundary positions are and .These are exactly five units from the center.
- Keep or .Positions to the left of 7 or to the right of 17 are far enough. Positions between them are too near.
- x ≤ 7 or x ≥ 17
- Interval: (−∞, 7] ∪ [17, ∞)
Rung 5 of 6
A thermostat's strict departure
A thermostat switches on when temperature T is more than 3 degrees from 70. Describe the switching temperatures.
What it asks. Find when the temperature is too far below or above the center.
Show the steps and the answer
The plan. Write the strict distance comparison, find the boundary temperatures, and keep the outward regions.
- Plan. Write the strict distance comparison, find the boundary temperatures, and keep the outward regions.
- T is the actual temperature; 70 is the center.
- More than excludes a difference of exactly 3.
- Write .The distance from temperature T to 70 must exceed 3.
- The two boundary temperatures are and .They are exactly three degrees from the center.
- Keep T < 67 or T > 73.Those temperatures are farther away, while the two boundary temperatures are excluded by more than.
- T < 67 or T > 73
- Interval: (−∞, 67) ∪ (73, ∞)
Rung 6 of 6
A poll's margin of error
A poll reports 52% with a margin of error of 3 percentage points. Let p be the percentage number, such as 52. Describe the permitted values.
What it asks. Find percentages within the stated departure from the reported center.
Show the steps and the answer
The plan. Treat p as a number on a percent scale and walk three percentage points each way from 52.
- Plan. Treat p as a number on a percent scale and walk three percentage points each way from 52.
- Here p = 52 means 52%, rather than the decimal 0.52.
- A margin of error includes its stated limits.
- Write .The distance from the reported percentage number is at most three percentage points.
- and .These give the lower and upper percentage-number limits.
- Keep .Every percentage number between the ends is within the margin, including both ends.
- 49 ≤ p ≤ 55
- Interval for p: [49, 55]
- Percentages: 49% through 55%
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Read |x − c| as the distance between x and c.
- The textbook uses within with both interpretations. Its Try It answers include the ends, while its $200 discussion means strictly less. If wording is only within, state whether you include the ends; use a strict sign when it says less than or strictly.
- A margin of error permits the same maximum departure on either side of the reported value.
7 The trap
The center and permitted distance have different jobs. In |R − 680| ≤ 34, 680 names the rating, while 34 says how far the measurement may depart from it.
Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.
Lesson 3 of 10
Build and read the V graph
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture your distance from a bus stop as you walk toward it and keep going. The stop is 5 blocks ahead, and you walk 1 block each minute. Your distance after t minutes is |t − 5|. It decreases until minute 5, then increases. Draw time across the page and distance upward, and you get two straight ramps meeting in a V. That meeting point is the corner point, or vertex. The plain y = |x| is the parent function, the shape before any changes. Moving its corner shifts the V. Multiplying its distance heights changes its steepness. Taking their opposites makes both arms go down.
2 Picture it
Reminder
Reminder: Slope, Coordinates and graph shadows, Substitution
- Slope. Slope = rise ÷ run. A rise of 2 for 1 step right gives slope 2; a fall of 2 gives slope −2.
- Coordinates and graph shadows. (x, y) records horizontal position first, height second. Domain is the shadow on the x-axis; range is the shadow on the y-axis.
- Substitution. Keep a negative input together: at x = −2, 2x + 2 means 2(−2) + 2 = −4 + 2 = −2.
3 Why
Start with the tables below. Subtracting 3 puts zero distance under x = 3. Multiplying those distances by 2 doubles their heights. Adding 4 raises every height by 4. Thus 2|x − 3| + 4 has corner (3, 4). The parent rule draws y = −x on the left of zero and y = x on the right. For a|x − h| + k, zero distance occurs at h and leaves height k. Each unit farther from h changes height by a. A negative a makes that change downward.
4 The rule
For with : a is the number multiplying the distance, h is its horizontal center, and k is the outside added height.
Vertex: (h, k). Left slope: ; right slope: a. It opens up if a > 0 and down if a < 0. Domain: all real numbers. Range: if a > 0; if a < 0.
The same idea, five ways
Say a times the absolute value of x minus h, plus k.
For a ≠ 0, the formula draws a V whose corner is (h, k). Positive a makes the arms rise away from it; negative a makes them fall.
- Vertex: (3, 4)
- Domain: (−∞, ∞)
- Range: [4, ∞)
- {y : y ≥ 4}
Place two ramps at a meeting point, then choose how much each step changes their height.
The same idea, other ways
One straight arm goes toward the corner from the left; the other goes away to the right. Both are straight because each unit of horizontal distance changes the height by the same amount.
The zero moves under input 3 first. Then double the distance row. Then raise it by 4. Follow the column under 1: distance 2, doubled distance 4, final height 8.
For 2|x − 3| + 4, subtract 3, measure the distance, multiply by 2, then add 4. At x = 4 the machine gives 2 × |1| + 4 = 6.
At the center h, the distance is zero. Multiplying that zero gives zero, and adding k gives k. One unit either side has the same distance 1, so both heights are k + a. This explains the matching arms.
f(h) = a × 0 + k = k
f(h + 1) = a + k
Part 1: Parent function
A toolkit function is a basic shape you reuse. The parent function is the unchanged y = |x|: two matching ramps meeting at the origin, the point (0, 0). Moving one unit farther from zero adds one unit to the height.
- f(x) = |x|.
- Vertex: (0, 0). Slopes: −1 on the left and 1 on the right.
- Domain: (−∞, ∞). Range: [0, ∞).
Worked example
Three parent points
Find the outputs at x = −1, 0, 1.
What it asks. Find the heights corresponding to inputs −1, 0, and 1.
Show the steps and the answer
The plan. Measure each input's distance from zero and read the table columns.
- Plan. Measure each input's distance from zero and read the table columns.
- Opposite inputs have matching distances.
- The column under 0 has output 0.
- and .Both positions are one unit from zero.
- .Home has distance zero.
- The output table gives the three plotted points.
- Vertex: (0, 0)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Keep the original parent shape in mind before describing a shift or stretch.
Part 2: Horizontal shift
Changing the home address moves the V sideways. Find the address that makes the inside zero.
- |x − h| shifts right h when h > 0.
- |x + c| shifts left c when c > 0.
Worked example
A left shift
Where is the vertex of |x + 2|?
What it asks. Find the horizontal position and height where this V turns.
Show the steps and the answer
The plan. Set the inside to zero, solve for the input, and substitute it.
- Plan. Set the inside to zero, solve for the input, and substitute it.
- x + 2 is x minus negative 2.
- No number outside raises or lowers the corner.
- Set and subtract 2 to find .This locates the input where the distance is zero and the V changes direction.
- , so the vertex is .Substitution finds the height at the turning input.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Find the inside zero instead of guessing from its sign.
Part 3: Vertical shift
Adding the same height to every point raises the entire road. Subtracting lowers it.
- |x| + k shifts up k if k > 0.
- The added number is also the vertex height.
Worked example
A downward shift
Find the vertex of |x| − 3.
What it asks. Find where the lowered V turns.
Show the steps and the answer
The plan. Use the parent corner input 0 and compute its new height.
- Plan. Use the parent corner input 0 and compute its new height.
- The inside still becomes zero at x = 0.
- Subtract 3 after taking absolute value.
- At .Zero remains the position of minimum distance, meaning the smallest possible distance. The outside subtraction changes the height, rather than the input where the distance is zero.
- The vertex is .Every height of the parent V was lowered by 3.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- An outside addition or subtraction changes every output by the same amount.
Part 4: Vertical stretch and compression
Multiplying distance heights changes the ramp's steepness. A factor above 1 makes the V narrower; a factor between 0 and 1 makes it wider.
- |a| > 1 gives a vertical stretch.
- 0 < |a| < 1 gives a vertical compression.
- The 2 in 2|x − 3| + 4 doubles the distance part alone: at x = 4, 2 × 1 + 4 = 6, rather than 2 × (1 + 4) = 10.
Worked example
Same input, different steepness
At x = 2, compare 2|x| with |x|.
What it asks. Find and compare two outputs at the same input 2.
Show the steps and the answer
The plan. Take the same distance |2|, then apply each multiplier separately.
- Plan. Take the same distance |2|, then apply each multiplier separately.
- The distance is 2 for both formulas.
- The factor asks for half the distance height.
- .The stretch doubles the parent height.
- .The compression halves the parent height.
- Stretch output: 4.
- Compression output: 1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Compare heights above or below the corner, rather than multiplying the final corner height.
Part 5: Reflection
A vertical reflection flips the distance heights upside down across the horizontal x-axis. A minus sign in front of the bars takes the opposite of each height. After that flip, adding 3 raises every point by 3. The order matters because flipping after a lift would also flip the added height.
- a < 0 reflects the distance part across the x-axis before the vertical shift.
- For −|x − h| + k, the vertex is a maximum, the greatest output.
- Vertically reflected means upside down across the x-axis, rather than a sideways reflection.
Worked example
Left two, upside down, then up three
Shift |x| left 2, reflect vertically, and shift up 3.
What it asks. Write the formula obtained by performing the three changes in the stated order.
Show the steps and the answer
The plan. Move the distance center, take opposite distance heights, then add the upward shift.
- Plan. Move the distance center, take opposite distance heights, then add the upward shift.
- A left shift 2 makes the center −2.
- A vertical reflection puts a minus sign in front of the bars.
- Left 2 gives .The inside becomes zero at −2.
- Reflection gives , and raising 3 gives .Taking the opposite turns the distance heights downward. Adding 3 afterward raises every resulting height.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Keep the upward shift outside the reflected bars when the instruction says reflect, then shift up.
Part 6: Horizontal scaling
A number multiplying the whole inside distance can be moved outside as its positive size. Multiplying by −2 reverses a trip and doubles its length; the bars keep the doubled length. The product rule allows this for multiplication. It does not allow splitting an addition or subtraction into separate absolute values. Here b is the number multiplying the entire inside, and h is still its center.
- For real numbers u and v, |uv| = |u| × |v|: multiplication multiplies lengths while the bars remove direction.
- For b ≠ 0, horizontal widths are multiplied by 1 ÷ |b|. If |b| > 1 this compresses them; if 0 < |b| < 1 this stretches them.
- An inside negative reverses left and right; the absolute value graph has matching sides, so the shape is unchanged.
- 2x − 6 = 2(x − 3), because distributing 2 gives 2x − 6. Therefore |2x − 6| − 2 = 2|x − 3| − 2.
Reminder
Reminder: Factoring a number
- Factoring a number. 2x − 6 = 2(x − 3), since 2 × x = 2x and 2 × (−3) = −6. Multiply back to check.
Worked example
Equivalent scalings
Rewrite |−2(x − 3)| − 2 with the multiplying number outside the bars. Also compare |2x − 6| − 2 with 2|x − 3| − 2.
What it asks. Show which inside multiplication can be moved outside, and verify two equal formulas with their output table.
Show the steps and the answer
The plan. Use the length product rule, keep the outside subtraction, and factor 2x − 6 before applying the same rule.
- Plan. Use the length product rule, keep the outside subtraction, and factor 2x − 6 before applying the same rule.
- The positive size of −2 is 2.
- Products may move outside; sums cannot be split.
- .Multiplying a trip by −2 doubles its length and reverses direction. The bars retain the length 2 times the original distance.
- Thus .The subtraction outside the bars stays after the distance multiplication.
- Factor . Then too.Distributing the 2 checks the factoring, and the product rule removes its positive factor.
- In the column under 1, both formulas give 2; under 3, both give . Every remaining column matches too.Factoring and the product rule preserve the result for every input, and these columns check its numerical effect.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Factor multiplication before moving a number outside. Keep sums together.
Part 7: Build the transformed output table
Treat the formula as a short measuring job. The first row finds distance from the new center. The next row doubles each distance. The last row adds the new corner height. Follow the same input column through these stages so you can see why the corner moved sideways and upward.
- For inputs 1 through 5, subtracting 3 centers the zero distance at input 3.
- Multiplying the distance heights by 2 changes steepness.
- Adding 4 to each result raises the entire graph.
Worked example
Three stages of 2|x − 3| + 4
Build the distance, doubled distance, and final output tables for inputs 1 through 5.
What it asks. See exactly what each operation changes in the table.
Show the steps and the answer
The plan. Evaluate the distance first, double its outputs, and add 4 last.
- Plan. Evaluate the distance first, double its outputs, and add 4 last.
- The zero distance is under 3.
- The doubling acts before the addition.
- At and 5, . At and 4 it is 1. At it is 0.These are the inputs' distances from 3, shown in the first table.
- Double every distance output to fill the second table.The outside multiplier 2 acts on the bars alone.
- Add 4 to every doubled output to fill the third table.The outside addition lifts each height equally.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Follow the same column through all three stages.
Part 8: Range on a limited input stretch
A viewing window is the stretch of inputs a calculator screen shows. Imagine looking at only part of a long road through a window. The full V may rise forever, while the visible part reaches only certain heights. To find the range for a stated input stretch, check both ends and the corner if it is inside that stretch.
- A viewing window [a, b] shows inputs from a to b. A stated restricted domain uses only those inputs.
- For an upward V, the lowest output is at the corner if the corner lies inside the stretch; otherwise it is at the end nearest the corner.
- For an upward V, the highest output over a closed limited stretch is at the end farther from the corner.
- For a downward V, greatest and smallest switch roles.
Worked example
A range inside a viewing window
Find the range of f(x) = 2|x − 5| when 3 ≤ x ≤ 6.
What it asks. Find every output reached while inputs stay in the stated stretch.
Show the steps and the answer
The plan. Check the left end, the included corner, and the right end, then compare their heights.
- Plan. Check the left end, the included corner, and the right end, then compare their heights.
- The corner input 5 lies between 3 and 6.
- The greatest distance from 5 occurs at the left end 3.
- Set to find the turning input . It lies in [3, 6], and .This checks whether the lowest point of the full V belongs to the allowed stretch.
- ; .Each straight arm has its other extreme at the permitted endpoint.
- The smallest output is 0 and the largest is 4, so write [0, 4].The connected arms reach every height between those two, and both extreme points are included.
- Domain in this question: [3, 6]
- Range: [0, 4]
- Output statement: 0 ≤ y ≤ 4
- Set-builder: {y : 0 ≤ y ≤ 4}
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Check the corner before choosing only endpoint outputs. A V can turn between them.
Part 9: A distance graph for passing a bus stop
A V can tell a time story. Start 5 blocks before a bus stop and walk 1 block each minute. Before you pass the stop, the distance shrinks. After you pass it, distance grows. The corner tells you the moment you are at the stop.
- For t ≥ 0 minutes, d(t) = |t − 5| blocks.
- The corner is (5, 0), meaning at minute 5 the distance is zero.
- Time in this story starts at zero, so only t ≥ 0 is part of the model.
Worked example
Five times in the walking model
Find the distances at times 0, 3, 5, 7, and 10 minutes for d(t) = |t − 5|.
What it asks. Find your distance from the stop at each stated time.
Show the steps and the answer
The plan. Substitute the time into the distance formula and record the results in a table.
- Plan. Substitute the time into the distance formula and record the results in a table.
- Times equally spaced from 5 give the same distance.
- Minute 5 gives the corner output zero.
- At and 10, the differences from 5 are and 5, so both distances are 5.The bars keep distance without the direction of the difference.
- At and 7, the differences are and 2, so both distances are 2.These times are equally far from the moment you pass the stop.
- At .At the passing time you stand at the stop itself.
- The table gives distance in blocks for each time in minutes.
- Corner: (5, 0)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The corner's input is the moment you reach the center; its output is the distance there.
5 How
- Set the entire inside equal to 0 and solve. This finds the input where its distance is zero, the corner's x-coordinate.
- Put that input into the full formula to find the corner's y-coordinate, then plot the corner.
- Choose one and two units on each side. Substitute all four inputs into the full formula, especially when a number multiplies x inside the bars.
- Draw an input and output table, plot its five points, connect each side with a straight arm, and extend the arms.
- Read domain as the graph's reach across the x-axis and range as its reach up the y-axis. For a limited input stretch, check both ends and the corner if it lies inside.
Graph a V, including a number multiplying x inside
- Make the inside zero to locate the corner input.
- Substitute that input to find the corner height.
- Evaluate four inputs surrounding the corner and record all five outputs.
- Plot and connect the arms. Read the input and output reach.
6 Worked example
Worked example
Move and stretch the parent graph
Graph f(x) = 2|x − 3| + 4. Give its vertex, arm slopes, domain, and range.
What it asks. Draw the V and describe its turning point, the steepness of each arm, and all allowed inputs and outputs.
Show the steps and the answer
The plan. Find the corner by making the inside zero. Calculate four surrounding points, then use their heights to read the arms and range.
- Plan. Find the corner by making the inside zero. Calculate four surrounding points, then use their heights to read the arms and range.
- Only the distance part is doubled. Add 4 afterward.
- The column under 3 contains the corner height 4.
- Set and add 3 to find . Then , so the vertex is (3, 4).Zero distance marks where the left and right instructions meet. Substituting that input finds the corner height.
- At and , so .Positions equally far from the center have equal outputs.
- At and , so .The two-step distance gives a doubled distance height of 4, followed by the upward shift 4.
- Use the five columns of the output table to plot the points. Connect each arm with a straight line.Each side uses a straight-line instruction, and the shared corner connects them.
- From (2, 6) to (3, 4), go 1 right and 2 down, giving slope . From (3, 4) to (4, 6), go 1 right and 2 up, giving slope 2.Slope is change in height divided by change across. These changes are −2 ÷ 1 and 2 ÷ 1.
- The domain is , and the range is .The formula accepts every real input. The lowest height is 4 and the arms rise without an upper limit.
- Vertex: (3, 4).
- Left slope: −2.
- Right slope: 2.
- Domain: (−∞, ∞).
- Range: [4, ∞).
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
The basic V
Graph y = |x| using five points.
What it asks. Draw the V and find its turning point and output heights.
Show the steps and the answer
The plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- Plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- The corner occurs at zero inside distance.
- Each table column gives one plotted point.
- At .Zero has no distance from itself, so this is the corner.
- At inputs and 1, the distance is 1. At inputs and 2, the distance is 2.Each pair is equally far from zero.
- Read the five table columns, plot their inputs and output heights, and connect two straight arms through the corner.The piecewise rules are straight lines on their respective sides.
- Vertex: (0, 0)
- Domain: (−∞, ∞)
- Range: [0, ∞)
Rung 2 of 5
Move the home address
Graph y = |x + 4|.
What it asks. Draw the V and find its turning point and output heights.
Show the steps and the answer
The plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- Plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- The corner occurs at zero inside distance.
- Each table column gives one plotted point.
- Set and subtract 4 to get . Then .The inside zero locates the corner input; substituting finds its height.
- At and . At and .These pairs are one and two units from the center −4.
- Use all five table columns to plot the points, then extend two straight arms from the corner.Only the center moved; each extra unit of distance still adds one to the height.
- Vertex: (−4, 0)
- Domain: (−∞, ∞)
- Range: [0, ∞)
Rung 3 of 5
Stretch and shift
Graph y = 3|x − 1| − 2.
What it asks. Draw the V and find its turning point and output heights.
Show the steps and the answer
The plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- Plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- The corner occurs at zero inside distance.
- Each table column gives one plotted point.
- Set and add 1 to get . Then .This finds and verifies the corner (1, −2).
- One unit away, . Two units away, .The factor 3 triples each distance height before subtracting 2.
- Plot all five table columns. The left arm drops 3 per step right and the right arm rises 3 per step right.Distance shrinks toward the corner and grows away from it, so the slopes are −3 and 3.
- Vertex: (1, −2)
- Left slope: −3
- Right slope: 3
- Domain: (−∞, ∞)
- Range: [−2, ∞)
Rung 4 of 5
Reflect and compress
Graph y = −|x + 3| + 5. Use points two units from the vertex.
What it asks. Draw the V and find its turning point and output heights.
Show the steps and the answer
The plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- Plan. Make the inside zero to find the corner input, substitute to find its height, and plot the surrounding table columns.
- The corner occurs at zero inside distance.
- Each table column gives one plotted point.
- Set and subtract 3 to get . Then .The inside zero finds the turning input, and substitution gives corner height 5.
- At and , distance is 2, so .The negative half multiplier turns two units of distance into a one-unit fall.
- At and 1, distance is 4, so .Four units of distance produce a two-unit fall from the corner.
- Plot the five table columns and connect the downward arms. The domain is all real numbers and the range is .Every nonzero distance subtracts from the greatest height 5, and the arms keep falling.
- Vertex: (−3, 5)
- Left slope:
- Right slope: −
- Domain: (−∞, ∞)
- Range: (−∞, 5]
Rung 5 of 5
A number multiplying x inside
Graph y = |2x + 2| − 1 using five points.
What it asks. Draw a V whose inside changes by two each time x changes by one.
Show the steps and the answer
The plan. Find the turning input, evaluate two inputs on each side, and connect the plotted table points.
- Plan. Find the turning input, evaluate two inputs on each side, and connect the plotted table points.
- Use the entire inside 2x + 2.
- The inside multiplying number affects steepness.
- Set . Subtract 2 to get , then divide by 2 to get .This finds the input where the inside distance is zero and the V turns.
- At .Substitution checks the turning input and locates its height.
- At and 0, the inside is and 2, so .These are one unit each side of the corner, and the inside changes by 2 per input unit.
- At and 1, the inside is and 4, so .Two input steps each way give inside distance 4.
- Plot all five table columns and connect straight arms. The left slope is and right slope is 2.Each step toward the corner lowers height by 2; each step away raises it by 2.
- Vertex: (−1, −1)
- Left slope: −2
- Right slope: 2
- Domain: (−∞, ∞)
- Range: [−1, ∞)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use five points: the corner, then one and two steps each side.
- Inside lies, outside tells the truth is a memory cue for shifts. Find the input that makes the inside zero to verify its direction: x − 3 becomes zero at positive 3.
- Domain is the horizontal reach. Range is the vertical reach. A plotted five-point table locates the V; its arms continue beyond the table unless the domain is limited.
7 The trap
Reading x − 3 as a left shift. Find where the inside is zero: x − 3 = 0 gives x = 3, so the corner moved right. The memory device is 'inside lies, outside tells the truth'; the zero calculation explains it.
Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.
Lesson 4 of 10
Write an equation from a graph
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
A graph can tell you the recipe that made it. Think of inspecting two ramps at a building entrance. Their meeting point tells you where they begin and at what height. One other point tells you how steep they are. For a V, write a|x − h| + k using the corner's address (h, k). The missing number a is the stretch factor: height change per unit of distance from the corner. Read a point's horizontal position and height from the grid, and put both numbers into your recipe. This also recovers a distance model from measurements. A graph of distance from a bus stop can reveal where you pass the stop.
2 Picture it
Reminder
Reminder: Reading coordinates, Subtracting a negative center, Dividing by a fraction
- Reading coordinates. Read the horizontal x position first and the vertical y height second. A point at x = 1, y = 2 is (1, 2).
- Subtracting a negative center. x − (−1) = x + 1, so a corner at x = −1 uses |x + 1|.
- Dividing by a fraction. 6 ÷ = 6 × = 4. The flipped fraction undoes multiplication by .
3 Why
At another point (p, q), |p − h| is its horizontal distance from the corner, and q − k is its height change. The recipe says q − k = a|p − h|, so dividing by that distance finds a. A point directly on the corner has distance zero and gives no steepness information. For an upward V, a horizontal cut D units above the corner meets each arm D ÷ a units from the center. The total width is 2D ÷ a. A narrower width at the same relative height therefore means a greater stretch factor.
4 The rule
Vertex form is .
From vertex (h, k) and another point (p, q) with : , where horizontal distance . For an upward V, width at height D above the corner is , with D > 0. An x-intercept, or horizontal intercept, is a point (x, 0); its input is called a zero.
The same idea, five ways
Say find the formula from the corner and a point on the V.
The corner determines the two shifts; another point determines the stretch factor.
- a =
- horizontal distance = |p − h|
Inspect a ramp's starting address and compare its rise with the distance walked.
The same idea, other ways
Step 1 to the right of the corner. The change in height is a. From (3, −2) to (4, 0), the rise is 2, so the formula uses a = 2.
A point (1, 2) means input 1 must produce output 2. In a|x − 3| − 2, this gives 2 = 2a − 2. Add 2 and divide by 2 to obtain a = 2.
At 4 above the corner, the parent V reaches 4 each side, giving width 8. This V reaches 2 each side, giving width 4. It reaches the same height in half the horizontal distance, so each unit must rise twice as much.
Height above corner: 4
Parent width: 8
Observed width: 4
Stretch factor: 8 ÷ 4 = 2
Part 1: Recover the bus-stop distance rule
A distance graph can be a set of measurements rather than a formula. When its corner says minute 5 and distance 0, that tells you when you passed the stop. If one minute later the distance is 1 block, the distance rises one block per minute away from that moment.
- A graph with corner (5, 0) and height 1 at t = 6 gives d(t) = |t − 5|.
- For this walking story, the time domain is t ≥ 0.
Worked example
A formula from distance measurements
The distance graph has corner (5, 0) and passes through (6, 1). Recover the distance formula for nonnegative times.
What it asks. Write the distance rule from the turning time and pace shown by the graph.
Show the steps and the answer
The plan. Use the corner for the center, then divide the height change by the time difference.
- Plan. Use the corner for the center, then divide the height change by the time difference.
- Zero distance occurs at time 5.
- One block per minute gives factor 1.
- Write .The corner's time is 5 and its height is 0.
- Insert (6, 1): , so .The measured output is one block at a time one minute from the corner.
- Write for .The model's measurements start at time zero.
- Time domain: [0, ∞)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- A recovered formula must reproduce the measured corner time and one other measurement.
5 How
- Read the corner from the grid: its horizontal position is h and its height is k.
- Write f(x) = a|x − h| + k, leaving the stretch factor a unknown.
- Read another clear point (p, q). Go to the x-axis to read p and to the y-axis to read q.
- Subtract the corner height k from q and divide by the horizontal distance |p − h|. This finds the stretch factor a.
- Put the resulting a into the formula and check it at a second point.
- For a requested x-intercept, find where the drawing reaches height 0. Algebraically, set the output to 0 to find its input. A positive distance from h has one position on each side, h minus that distance and h plus it.
Recover a V formula from a graph
- Read the corner (h, k).
- Write a|x − h| + k.
- Read a different point and find its height change and horizontal distance from the corner.
- Divide height change by distance to find a.
- Check the formula at a second point.
6 Worked example
Worked example
Read a V from its picture
Write the equation of the V in the picture and find its x-intercepts.
What it asks. Read the turning point and steepness from the grid, then identify where the graph has height zero.
Show the steps and the answer
The plan. Locate the corner, count a one-step rise, write the formula, check another point, and find ground-level positions.
- Plan. Locate the corner, count a one-step rise, write the formula, check another point, and find ground-level positions.
- The lowest point is the corner. Read horizontal position first and height second.
- One step right from the corner reveals a when the rise is readable.
- The lowest point reads , so and . Write .The V turns where its distance part is zero; its grid address gives both shifts.
- From the corner move 1 right to . The graph height is 0, which is above the corner. Thus .The stretch factor measures height change per unit of distance from the corner.
- Write .The corner and one-step height have supplied all three numbers in vertex form.
- Check the point (1, 2): .Another readable point must agree with the formula, including on the left arm.
- Set the output to zero: . Add 2, then divide by 2 to get .A horizontal intercept has height zero. Undoing the outside operations identifies its required distance from 3.
- A distance of 1 from 3 occurs at or . Equivalently, or .The distance picture places one input on each side of the center.
- At height , the graph meets and . Its width is , and that height is above the corner.For a second steepness check, compare widths at a fixed height above the corner. The parent V is 8 wide at height 4 above its corner, so this V is half as wide and twice as steep.
- Zeros: x = 2 and x = 4
- x-intercepts: (2, 0) and (4, 0)
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
The stretch factor is given
An upward V has vertex (2, 1) and the same steepness as |x|. Write its formula.
What it asks. Find the formula of the V from its corner and the supplied information.
Show the steps and the answer
The plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- Plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- The corner supplies both shifts.
- Divide the height change by horizontal distance, which is positive.
- .The parent graph has one unit of rise per unit of distance.
- Use and to write .These numbers place the corner at the stated address.
Rung 2 of 5
One point reveals the stretch factor
Find a V with vertex (−1, 2) passing through (1, 8).
What it asks. Find the formula of the V from its corner and the supplied information.
Show the steps and the answer
The plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- Plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- The corner supplies both shifts.
- Divide the height change by horizontal distance, which is positive.
- .The center is −1, and x − (−1) = x + 1. The corner height is 2.
- Put (1, 8) into the formula: .That point requires input 1 to give output 8, and the distance from −1 to 1 is 2.
- Subtract 2 on both sides: . Divide by 2 to get .Removing the corner height leaves the rise, and dividing by distance finds the stretch factor.
Rung 3 of 5
The graph opens down
Find a V with vertex (4, 6) passing through (0, 4).
What it asks. Find the formula of the V from its corner and the supplied information.
Show the steps and the answer
The plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- Plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- The corner supplies both shifts.
- Divide the height change by horizontal distance, which is positive.
- .The corner fixes center 4 and height 6.
- Insert (0, 4): .The given point lies four units horizontally from the corner.
- Subtract 6: . Divide by 4: .The height change is a fall of 2 over distance 4. Dividing those numbers finds the signed stretch factor.
Rung 4 of 5
Fractional coordinates
Find a V with vertex (, −1) passing through (2, 5).
What it asks. Find the formula of the V from its corner and the supplied information.
Show the steps and the answer
The plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- Plan. Use the corner to write vertex form, find the stretch factor from the other information, and check a point.
- The corner supplies both shifts.
- Divide the height change by horizontal distance, which is positive.
- .The corner supplies center and height −1.
- Write 2 as , so .Matching fraction bottoms allows subtraction, and the positive result is the horizontal distance.
- Insert (2, 5): . Add 1 to obtain .The point gives the output equation, and adding 1 removes the downward shift.
- .The reciprocal undoes multiplication by , isolating the stretch factor.
Rung 5 of 5
Read a downward V from a picture
Read the downward V in the picture and write its formula.
What it asks. Recover the center, highest height, and signed stretch factor directly from the grid.
Show the steps and the answer
The plan. Read the corner and one step to its right. Check a point on the other arm.
- Plan. Read the corner and one step to its right. Check a point on the other arm.
- The corner is the highest point for a downward V.
- A fall gives a negative stretch factor.
- The highest point reads , so write .The corner gives h = −2, and x − (−2) = x + 2.
- One step right reaches . The height change is over distance 1, so .A downward change is negative, while horizontal distance is positive.
- Write .The corner and one-step fall determine the V.
- Check the left point (−3, 1): .The recovered formula must fit the other arm too.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- From the corner, one step right gives a directly if that point is readable.
- A second point checks the entire formula. Always choose a point away from the corner to find a.
- For an upward V, compare widths at the same height above each corner, rather than at the same y-coordinate when corner heights differ.
7 The trap
Dividing by p − h instead of |p − h|. A point left of the corner has a negative coordinate difference, but its distance is positive. Keep the bars so a correctly records whether the V opens up or down.
Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.
Lesson 5 of 10
Solve an absolute value equation
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Suppose you must stand exactly eight blocks from a sign on a straight road. You can stand on its right or its left. An absolute value equation asks for every position with an exact distance. The unknown sits inside the bars, perhaps after several operations. First clear away the operations outside the bars until the distance stands alone. Then ask whether that distance is possible. Positive gives two directions. Zero means standing at the sign. Negative cannot describe a distance. In our rules, A is a nickname for everything inside the bars, and B is the number on the other side. In |2x − 6| = 8, A means 2x − 6 and B means 8.
2 Picture it
Reminder
Reminder: Multiplication beside bars, Equation balance, Fractions multiplying x, Negative substitution, Answer sets
- Multiplication beside bars. 3|x + 2| means 3 × |x + 2|. The bars group the whole inside, so finish x + 2 before multiplying.
- Equation balance. Subtract or add the same amount to both sides. Dividing an equation by a negative changes no equality sign: −2u = −8 becomes u = 4.
- Fractions multiplying x. x = 4 becomes x = 4 × = 6. The reciprocal cancels because their product is 1.
- Negative substitution. At x = −1, write 2(−1) − 6 = −2 − 6 = −8. Parentheses keep the negative input together.
- Answer sets. {−7, 3} means the set containing −7 and 3. {4} has one answer. ∅ and { } have none.
3 Why
For a positive B, only B and −B have distance B from zero. So |A| = B has exactly the same answers as A = B or A = −B. Each of those equations is a branch, one case to solve. They concern the entire inside A, never each term separately. At B = 0, both directions meet at A = 0. At B < 0, no real number has that distance. For A = mx + c, m and c are fixed numbers and m ≠ 0. Undoing addition and multiplication gives one input per branch. Other inside expressions can have different counts.
4 The rule
Isolate first.
For B > 0, solve or . For , solve . For B < 0, there is no solution. These give two, one, or no inputs when mx and . Check every input in the original equation.
The same idea, five ways
the absolute value of A equals B. A names the whole inside, and B is the number on the other side.
Find every input whose whole inside has exactly the required distance from zero.
- |A| = B
- For B > 0: A = B or A = −B
- |2x − 6| = 8 gives x = −1 or x = 7
- Set notation: {−1, 7}
- One answer: {4}
- No answers: ∅, also written { }
Find both houses exactly eight blocks from one sign. Zero distance means the sign itself; negative distance cannot occur.
The same idea, other ways
An exact positive distance from a landmark places you that far left or that far right. Neither direction can be discarded.
Absolute value sends both −5 and 5 to 5. Reversing it must consider both possible inputs. Then reverse the earlier addition or multiplication to recover x.
The graph y = |x + 2| crosses y = 5 twice, at −7 and 3. The line y = 0 meets the corner once. A line below zero never meets this distance graph because every output is zero or positive.
An inside value between −5 and 5 has distance less than 5; an inside value outside that span has distance greater than 5. Only its two boundary values can give distance exactly 5.
| B, the number on the other side | Inside equation or equations | If A = mx + c and m ≠ 0 |
|---|---|---|
| B > 0 | A = B or A = −B | Two solutions |
| B = 0 | A = 0 | One solution |
| B < 0 | No possible inside value | No solution: ∅ |
Part 1: B positive
Two opposite positions give the same positive distance. Solve both equations.
- For B > 0, |A| = B means A = B or A = −B.
- When A = mx + c and m ≠ 0, each inside equation gives one input and the two inputs differ.
- For |x| = 3, the answer set is {−3, 3}.
Worked example
An exact three-unit distance
Solve |x| = 3.
What it asks. Find every number whose distance from zero is exactly 3.
Show the steps and the answer
The plan. Choose the position three units left and the position three units right, then check them.
- Plan. Choose the position three units left and the position three units right, then check them.
- The distance is positive.
- Both directions count.
- or .These are the two positions three units from zero.
- Keep both possible inputs after checking and .An equation needs every input that makes it true.
- x = −3 or x = 3
- Set: {−3, 3}
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use the word or between the two input values. You are listing alternatives, not requiring one x to be both numbers.
Part 2: B zero
You have distance zero only when you are at the center. Left and right give the same position, so do not count it twice.
- |A| = 0 means A = 0.
- Do not list +0 and −0 as different solutions.
Worked example
One solution
Solve |x − 4| = 0.
What it asks. Find the input exactly zero units from 4.
Show the steps and the answer
The plan. Set the whole inside to zero, solve for the center, and substitute it back.
- Plan. Set the whole inside to zero, solve for the center, and substitute it back.
- Only an inside value of zero has absolute value zero.
- Add 4 to both sides to find that input.
- Set .This asks for the input where the inside vanishes, the only way the distance can be zero.
- Add 4 to both sides: .This finds the center input by undoing subtracting 4.
- Check , then write {4}.The input satisfies the original equation, and the braces list its one answer.
- x = 4
- Set: {4}
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- When B is zero, solve one inside equation. There is only one zero-distance position.
Part 3: B negative
A negative required distance is impossible. You stop when isolation reveals it.
- |A| ≥ 0 for every real A.
- If isolation gives B < 0, no input can satisfy |A| = B. The answer set is ∅.
Worked example
A distance cannot equal −3
Solve |3x + 1| + 5 = 2.
What it asks. Find whether any x can make |3x + 1| + 5 equal 2.
Show the steps and the answer
The plan. Remove the outside +5, inspect the resulting distance, and stop if it is negative.
- Plan. Remove the outside +5, inspect the resulting distance, and stop if it is negative.
- Subtract 5 from both sides.
- Distance can be zero or positive, but never negative.
- Subtract 5 from both sides: .This isolates the bars so the required distance can be inspected.
- There is no solution. Write .No value inside the bars produces distance −3; the equation cannot hold for any input.
- No solution
- Set: ∅
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Inspect B after isolation. An outside negative can turn a negative starting number into a positive B.
Part 4: The bars may be on the right
A balanced scale can be read from either side. Swap the complete sides if it helps you see the bars on the left. Then undo the outside operations in the usual order.
- The left side equals the right side also means the right side equals the left side. You can swap the two complete expressions.
- Swapping sides changes no signs inside either expression.
- In an equation, dividing by a negative keeps equality. The inequality flip rule concerns inequality signs.
Worked example
A zero on the left
Solve 0 = −|x + 5| + 6.
What it asks. Find every input that makes the right side equal zero.
Show the steps and the answer
The plan. Swap sides, subtract 6, divide by −1, then solve two inside equations.
- Plan. Swap sides, subtract 6, divide by −1, then solve two inside equations.
- Read 0 = −|x + 5| + 6 from the right side to the left side.
- Division by a negative keeps the equals sign.
- The isolated distance will be 6.
- Swap the complete sides: .Equal amounts can be written in either order without changing the equation.
- Subtract 6 from both sides: .This removes the addition outside the bars.
- Divide both sides by −1: .This cancels the outside minus. Equality stays equality.
- Write or .The positive distance 6 can come from inside value 6 or −6.
- Subtract 5 in each equation: or .This finds the inputs that produce the two possible inside values.
- x = −11 or x = 1
- Set: {−11, 1}
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write the whole equation in reverse order before doing algebra. Keep every sign attached to its expression.
5 How
- Get the bars and their complete contents alone. Undo addition or subtraction outside first, then multiplication or division.
- Name A, everything inside the bars, and B, the number on the other side. Inspect B before splitting.
- For B > 0, write A = B or A = −B. For B = 0, write only A = 0. For B < 0, stop with no solution.
- Solve each possible equation by undoing the inside operations. This finds the inputs that produce the required inside values.
- Substitute each possible answer into the original equation. Keep only inputs that make both sides equal.
- Write the answer as inputs and as a set. {−7, 3} lists two answers. {4} lists one answer. ∅ means the empty set, no answers, and can also be written { }. Braces collect answers; a comma separates them.
Solve an absolute value equation
- Isolate the bars by undoing what happens outside them. The resulting B is the actual distance to inspect.
- Check whether B is negative, zero, or positive before writing inside equations.
- Solve every possible inside equation, then substitute into the original and list the complete answer set.
6 Worked example
Worked example
Isolate before choosing directions
Solve 3|x + 2| − 4 = 11.
What it asks. Find every x that makes the left side equal 11, then write those inputs as a set.
Show the steps and the answer
The plan. Undo minus 4, then times 3 outside the bars. Solve two equations for the whole inside and check both inputs.
- Plan. Undo minus 4, then times 3 outside the bars. Solve two equations for the whole inside and check both inputs.
- The outside operations are times 3, then minus 4. Undo them in reverse order.
- After isolation, |x + 2| = 5 means x + 2 equals 5 or −5.
- A positive distance has a left position and a right position.
- Add 4 to both sides: , so .This removes the outside subtraction while keeping the sides equal.
- Divide both sides by 3: .Division cancels the outside multiplication. Now B, the number on the other side, is the true distance 5.
- Write or .The complete inside must be one of the two numbers whose absolute value is 5.
- In the first equation subtract 2 from both sides: .This finds the input that produces inside value 5.
- In the second equation subtract 2 from both sides: .This finds the input that produces inside value −5. Both possible directions must be checked.
- Substitute 3 and into the original equation and keep both. Write .Both give original left side 11, so both inputs belong to the answer set.
- x = −7 or x = 3
- Set: {−7, 3}
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 8
Bare bars
Solve |x| = 6.
What it asks. Find every number exactly six units from zero.
Show the steps and the answer
The plan. Use both directions from zero and check both.
- Plan. Use both directions from zero and check both.
- The bars are already alone.
- A positive B gives two inside values.
- The bars are isolated and .There are no outside operations to undo.
- or .Both directions have distance six from zero.
- x = −6 or x = 6
- Set: {−6, 6}
Rung 2 of 8
Undo an inside shift
Solve |x − 2| = 3.
What it asks. Find every number exactly three units from 2.
Show the steps and the answer
The plan. Split the inside into 3 or −3, then add 2 and check both inputs.
- Plan. Split the inside into 3 or −3, then add 2 and check both inputs.
- Keep x − 2 together as the whole inside.
- The center is 2.
- Write or .A positive distance 3 can come from either whole inside value.
- Add 2 in the first equation: .This finds the input three units right of 2.
- Add 2 in the second equation: .This finds the input three units left of 2.
- x = −1 or x = 5
- Set: {−1, 5}
Rung 3 of 8
Subtraction from a number
Solve |7 − x| = 3.
What it asks. Find every input whose distance from 7 is exactly 3.
Show the steps and the answer
The plan. Set the whole inside equal to 3 and −3, then undo subtraction of x in each equation.
- Plan. Set the whole inside equal to 3 and −3, then undo subtraction of x in each equation.
- Keep 7 − x together.
- |7 − x| = |x − 7| because reversing a difference keeps its distance.
- Write or .The whole inside has to be one of the two values whose absolute value is 3.
- In the first equation subtract 7: . Divide by : .This finds the input that makes the inside 3. Division keeps equality.
- In the second equation subtract 7: . Divide by : .This finds the input that makes the inside −3.
- x = 4 or x = 10
- Set: {4, 10}
Rung 4 of 8
A number multiplying x inside
Solve |2x − 6| = 8.
What it asks. Find every x whose whole inside 2x − 6 has distance 8 from zero.
Show the steps and the answer
The plan. Write the inside equal to 8 and −8, then solve and check each equation.
- Plan. Write the inside equal to 8 and −8, then solve and check each equation.
- A is 2x − 6, not x alone.
- Add 6, then divide by 2, in both branches.
- Write or .B = 8 > 0, so the complete inside has two possible values.
- In the first equation add 6 to both sides: .This removes the inside subtraction while keeping both sides equal.
- Divide by 2: .This finds the input that makes the inside 8.
- In the second equation add 6: .This removes the same subtraction for the other possible direction.
- Divide by 2: .This finds the input that makes the inside −8.
- x = −1 or x = 7
- Set: {−1, 7}
Rung 5 of 8
Isolate two outside operations
Solve 2|x − 1| + 3 = 11.
What it asks. Find every x that makes twice the distance from 1, plus 3, equal 11.
Show the steps and the answer
The plan. Subtract 3 and divide by 2 before choosing the two inside values.
- Plan. Subtract 3 and divide by 2 before choosing the two inside values.
- Undo the outside operations in reverse order.
- After isolation, B is 4.
- Subtract 3 from both sides: .This removes the outside addition.
- Divide both sides by 2: .The bars now stand alone, revealing the required distance.
- Write or .The whole inside must have distance 4 from zero.
- Add 1 in the first equation: .This finds the input on the right.
- Add 1 in the second equation: .This finds the input on the left.
- x = −3 or x = 5
- Set: {−3, 5}
Rung 6 of 8
Compare zero and negative B
Solve |2x − 8| = 0 and |2x − 8| = −1.
What it asks. Solve two separate equations. First find zero distance; then decide whether negative distance is possible.
Show the steps and the answer
The plan. For B = 0 solve one inside equation. For B = −1 stop with no solution.
- Plan. For B = 0 solve one inside equation. For B = −1 stop with no solution.
- Zero is a possible distance.
- Negative one is not a possible distance.
- For , set .This finds the input where the inside vanishes, the only way to have distance zero.
- Add 8 to both sides: .This removes the inside subtraction.
- Divide by 2: . Check .This isolates the input and confirms it in the original zero-distance equation.
- For , there is no solution: .Every distance is at least zero, so no input gives −1.
- |2x − 8| = 0: x = 4; set {4}
- |2x − 8| = −1: no solution; set ∅
Rung 7 of 8
A fraction multiplying x inside
Solve |x − 1| = 3.
What it asks. Find every x that makes the entire inside exactly three units from zero.
Show the steps and the answer
The plan. Set the inside equal to 3 and −3. Add 1, then multiply by the reciprocal in each equation.
- Plan. Set the inside equal to 3 and −3. Add 1, then multiply by the reciprocal in each equation.
- x means × x.
- Multiplying by gives 1.
- Keep exact fractions until the calculation finishes.
- Write or .The positive B = 3 allows two whole inside values.
- In the first equation add 1: .This removes the inside subtraction.
- Multiply both sides by : .The reciprocal cancels the multiplier of x and finds the first possible input.
- In the second equation add 1: .This removes the same subtraction in the other branch.
- Multiply both sides by : .The reciprocal finds the input that produces the negative inside value.
- x = −3 or x = 6
- Set: {−3, 6}
Rung 8 of 8
A negative outside multiplier and fractional answer
Solve −2|3x − 1| + 5 = −3.
What it asks. Find every x that makes the whole expression equal −3.
Show the steps and the answer
The plan. Remove +5, divide by −2, then solve the two inside equations and check the fractional input exactly.
- Plan. Remove +5, divide by −2, then solve the two inside equations and check the fractional input exactly.
- An equation keeps its equals sign when divided by a negative.
- The isolated distance becomes positive 4.
- The coefficient is the number multiplying a letter or the bars. Here −2 multiplies the bars and 3 multiplies x.
- Subtract 5 from both sides: .This removes the outside addition before inspecting the distance.
- Divide both sides by −2: .This cancels the outside multiplier. Equality stays equality; no inequality sign is present to flip.
- Write or .The positive B = 4 allows two whole inside values.
- In the first equation add 1: . Divide by 3: .These moves find the input that produces inside value 4. The fraction is exact.
- In the second equation add 1: . Divide by 3: .These moves find the input that produces inside value −4.
- x = −1 or x =
- Set: {−1, }
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Box the isolated |A| = B before choosing cases. Inspect B there, rather than the number in the starting equation.
- Two answers: list both in braces, smaller first. One answer: use one number in braces. No answers: use ∅.
- The textbook may write the second case as −A = B. Multiplying both sides by −1 gives A = −B, so the two versions have the same answers.
- Memory cue: alone, then two roads. First isolate the bars; take both roads only when B is positive.
7 The trap
Splitting before isolating, or keeping only the positive branch. In 3|x + 2| − 4 = 11, the needed distance is 5, not 11. Box the isolated equation, then choose its branches.
Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.
Lesson 6 of 10
Find zeros and axis intercepts
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
On a road map, an intersection is where two routes meet. On a graph, an x-intercept, also called a horizontal intercept, is where the graph meets the x-axis, the horizontal line at height zero. A zero is the input that makes that happen. A y-intercept, or vertical intercept, is where the graph meets the y-axis, the vertical line with horizontal position zero. To find zeros, ask for output zero and solve for the unknown input. To find the y-intercept, the input is already zero, so calculate its output. For distance from a bus stop, the zero tells you the time you reach the stop. That is why this input can matter.
2 Picture it
Reminder
Reminder: A and B, Coordinates, Negative substitution, Exact fractions, Equation balance
- A and B. In |4x + 1| = 7, A names the whole inside 4x + 1 and B is 7. Solve A = 7 or A = −7.
- Coordinates. A point (x, y) lists input first and output second. (2, 0) is on the x-axis; (0, 2) is on the y-axis.
- Negative substitution. For x = −2, write 4(−2) + 1 = −8 + 1 = −7 before taking absolute value.
- Exact fractions. = because dividing top and bottom by 2 keeps the same number.
- Equation balance. Dividing −3u = −6 by −3 gives u = 2. Equality stays equality.
3 Why
For a|x − h| + k with a ≠ 0, zero height requires a|x − h| = −k, then |x − h| = −k ÷ a. Opposite signs for a and k make that distance positive, giving two crossings. If k = 0, the distance is zero, giving one. Matching nonzero signs make it negative, giving none. Every real input works in the formula, including zero, so there is always one y-intercept. A zero is a number, such as 2. Its x-intercept is the point (2, 0). Distinguishing the number from the point keeps your answer in the requested form.
4 The rule
Zeros: solve to find the inputs whose output is zero.
Their x-intercepts are (x, 0). y-intercept: evaluate f(0) and write (0, f(0)). In with : opposite signs for a and k give two x-intercepts; gives one; the same nonzero sign gives none. The full V always has exactly one y-intercept.
The same idea, five ways
a zero is an input that gives output zero. An x-intercept is its point on the horizontal axis. The y-intercept is the point at input zero.
Finding an x-intercept means finding where the graph reaches height zero; finding a y-intercept means finding its height directly over input zero.
- Zero: f(x) = 0
- x-intercept: (x, 0)
- y-intercept: (0, f(0))
- For f(x) = |4x + 1| − 7, zero set {−2, }
- x-intercepts: (−2, 0) and (, 0)
- y-intercept: (0, −6)
Find where a road meets ground level, or where it crosses one fixed road running north and south. Those are different map questions.
The same idea, other ways
Every point on the horizontal axis has height zero. A zero input is where your road reaches that height. A bus-stop distance |t − 5| has zero t = 5 because that is the minute you reach the stop.
For f(x) = |4x + 1| − 7, look for zero in the output row. The column under −2 and the column under have output 0, so those inputs are zeros. The column under 0 has output −6, giving the y-intercept (0, −6).
In 2|x − 5| − 6, a = 2 is positive and k = −6 is negative, so the lowest point is below zero and both arms rise through zero. In −2|x + 6| − 1, both a and k are negative, so its highest point is below zero and no arm reaches zero.
Opposite signs: two crossings
k = 0: one crossing
Same nonzero sign: no crossing
| Graph | Position relative to height 0 | Number of x-intercepts |
|---|---|---|
| |x| + 2 | Entirely above | 0 |
| |x| | Corner at zero | 1 |
| Corner below, arms rise above | 2 | |
| Corner above, arms drop below | 2 | |
| Entirely below | 0 |
Part 1: Horizontal intercepts
Look for the inputs where the road reaches ground level. Each such input is a zero.
- x-intercept and horizontal intercept mean the same point.
- The point has coordinates (x, 0).
Worked example
Two ground-level positions
Find the x-intercepts of |x| − 1.
What it asks. Find the points where this V reaches height zero.
Show the steps and the answer
The plan. Set the output equal to zero, isolate the bars, solve both inside cases, and attach y-coordinate 0.
- Plan. Set the output equal to zero, isolate the bars, solve both inside cases, and attach y-coordinate 0.
- The input is unknown.
- The intercept's output is fixed at zero.
- Set the output equal to zero: .This asks which inputs place the graph on the horizontal axis.
- Add 1 to both sides: .This isolates the distance and reveals positive B = 1.
- Write or , then check and .Both inside values have distance 1, and both inputs give zero in the original formula.
- Write and (1, 0).An intercept is a point, so include its output coordinate 0.
- Zero inputs: x = −1 and x = 1
- Zero set: {−1, 1}
- x-intercepts: (−1, 0) and (1, 0)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write y-coordinate 0 in every x-intercept point.
Part 2: Vertical intercept
Stand on the vertical axis, where the horizontal address is zero. Read the height of the graph there.
- y-intercept and vertical intercept mean the same point.
- The point has coordinates (0, f(0)).
Worked example
The vertical-axis height
Find the y-intercept of |x − 2| + 1.
What it asks. Find the graph point whose horizontal input coordinate is zero.
Show the steps and the answer
The plan. Put input zero into the original formula, compute the output, and write the two coordinates.
- Plan. Put input zero into the original formula, compute the output, and write the two coordinates.
- Every point on the y-axis has x = 0.
- There is no equation to solve for x here; x is already given.
- Use input 0: .This finds the height over the vertical axis.
- Compute , then .Evaluate the entire inside before taking its distance.
- Add 1: . Write (0, 3).The output is 3 at input 0, and an intercept answer is a point.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write x = 0 before calculating a y-intercept so the two intercept tasks stay distinct.
Part 3: Count x-intercepts without graphing
Imagine the corner of a V as a ramp's lowest or highest landing. Whether that landing lies above or below ground, and whether the ramps rise or fall away from it, determines how many times the road can reach ground level.
- For a|x − h| + k with a ≠ 0, a sets opening direction and k sets corner height.
- a and k with opposite signs give two x-intercepts. k = 0 gives one. Matching nonzero signs give none.
- Algebra checks the same count: solving output 0 gives a distance −k ÷ a. Positive gives two, zero gives one, negative gives none.
Worked example
A positive a and negative corner height
Without graphing, decide how many x-intercepts f(x) = 2|x − 5| − 6 has. Then find them.
What it asks. Count the graph's zero-height points from its formula, then find their exact coordinates.
Show the steps and the answer
The plan. Compare a and k, then solve output zero and check the two inputs.
- Plan. Compare a and k, then solve output zero and check the two inputs.
- a = 2 and k = −6 have opposite signs.
- The required distance after isolation is 3.
- Read and . There are two x-intercepts.The corner is below zero, and the two arms rise without stopping, so each arm crosses zero once.
- Set the output to zero: .This asks for the inputs where the graph reaches the horizontal axis.
- Add 6 to both sides: .This removes the outside subtraction while keeping the two sides equal.
- Divide both sides by 2: .This isolates the distance and reveals positive B = 3.
- Write or .Both whole inside values have absolute value 3.
- Add 5 in each equation: or .This finds the two zero inputs. Check them in the original formula before writing the intercept points.
- Number of x-intercepts: 2
- Zeros: x = 2 and x = 8
- Zero set: {2, 8}
- x-intercepts: (2, 0) and (8, 0)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Inspect a and k together. Opening direction alone does not decide the crossing count.
5 How
- For zeros or x-intercepts, set the output f(x) equal to 0. This asks which inputs place the graph on the horizontal axis.
- Isolate the bars. Inspect B, the number on the other side, to determine whether two, one, or no inside equations are possible.
- Solve each possible equation to find the zero inputs. Substitute each input into the original formula to confirm output 0.
- List zeros as numbers or an answer set. List x-intercepts as points with y-coordinate 0.
- For the y-intercept, substitute x = 0 into the original formula and calculate the output. Write the point (0, f(0)).
Zeros, intercepts, and how many crossings
- Read whether the question asks for inputs, points, or a count of crossings.
- For zeros or horizontal intercepts, require output 0, isolate the bars, and solve the possible inside equations.
- For the vertical intercept, use input 0 and evaluate the original formula.
- For a crossing count without graphing, inspect the signs of a and k in a|x − h| + k, or inspect B after isolation.
6 Worked example
Worked example
Find zeros and intercepts
Find the zeros and both kinds of axis intercepts of f(x) = |4x + 1| − 7.
What it asks. Zeros: the output is 0, so find every input that gives it. x-intercepts: write those zero-input points. y-intercept: the input is 0, so calculate the output.
Show the steps and the answer
The plan. Set the function equal to zero and solve the two inside equations. Then separately put input zero into the original function.
- Plan. Set the function equal to zero and solve the two inside equations. Then separately put input zero into the original function.
- Output zero and input zero are different instructions.
- Add 7 before splitting the inside.
- Use parentheses around a negative input during substitution.
- Set the output equal to 0: .This finds the inputs whose graph points lie on the horizontal axis.
- Add 7 to both sides: .This removes the outside subtraction and reveals positive B = 7.
- Write or .The complete inside can be either of the two numbers with absolute value 7.
- In the first equation subtract 1: . Divide by 4: .These steps find the input whose inside is 7. Dividing the fraction's top and bottom by 2 reduces it.
- In the second equation subtract 1: . Divide by 4: .These steps find the input whose inside is −7.
- Check both zero inputs in the original formula and write points and .Both substitutions give output 0, so both points are x-intercepts.
- For the y-intercept use input 0: .Points on the vertical axis have x-coordinate 0. This calculation finds the height there.
- Zeros: x = −2 and x =
- Zero set: {−2, }
- x-intercepts: (−2, 0) and (, 0)
- y-intercept: (0, −6)
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
One touching point
Find all intercepts of f(x) = |x − 3|.
What it asks. Find every point where the V meets either coordinate axis.
Show the steps and the answer
The plan. Require output zero for the x-intercept; put in input zero for the y-intercept.
- Plan. Require output zero for the x-intercept; put in input zero for the y-intercept.
- A zero-distance V has one horizontal touching point.
- Input zero is a separate substitution.
- Set : . Set the inside .This finds where the graph has height zero. Only inside zero has distance zero.
- Add 3 to both sides: . Check .This finds and verifies the one zero input.
- For the y-intercept use input 0: .This calculates the height on the vertical axis.
- Zero: x = 3
- Zero set: {3}
- x-intercept: (3, 0)
- y-intercept: (0, 3)
Rung 2 of 5
Two crossings
Find all intercepts of f(x) = |x + 1| − 2.
What it asks. Find all zero inputs, their horizontal-axis points, and the vertical-axis point.
Show the steps and the answer
The plan. Solve the zero-output equation with both inside signs, then compute the output at input zero.
- Plan. Solve the zero-output equation with both inside signs, then compute the output at input zero.
- Add 2 before splitting the bars.
- Subtract 1 to solve each inside equation.
- Set the output equal to zero: . Add 2: .This asks which inputs put the graph on the x-axis and isolates the required distance.
- Write or .The positive distance 2 has two possible whole inside values.
- Subtract 1 in each equation: or .This finds both zero inputs.
- For the y-intercept use x = 0: .This finds the graph's height on the vertical axis.
- Zeros: x = −3 and x = 1
- Zero set: {−3, 1}
- x-intercepts: (−3, 0) and (1, 0)
- y-intercept: (0, −1)
Rung 3 of 5
No crossing
Find all intercepts of f(x) = 2|x − 1| + 3.
What it asks. Determine whether the V reaches output zero, and find its output at input zero.
Show the steps and the answer
The plan. Set output zero and inspect the distance after isolation. Compute f(0) separately.
- Plan. Set output zero and inspect the distance after isolation. Compute f(0) separately.
- A negative isolated distance cannot occur.
- The y-intercept still exists even if there are no x-intercepts.
- Set output zero: . Subtract 3: .This asks which inputs reach the horizontal axis and removes the outside addition.
- Divide by 2: .This isolates the distance so its possibility can be checked.
- There are no zero inputs or x-intercepts: .A distance cannot equal −. Every original output is at least 3.
- Use x = 0 for the y-intercept: .This calculates the height over the vertical axis, where the input is zero.
- Zeros: none; zero set ∅
- x-intercepts: none
- y-intercept: (0, 5)
Rung 4 of 5
Reflected V and fractions
Find all intercepts of f(x) = −3|2x + 1| + 6.
What it asks. Find the two possible zero inputs of this downward V and the height at input zero.
Show the steps and the answer
The plan. Solve output zero, dividing by the negative outside multiplier, then compute the y-intercept separately.
- Plan. Solve output zero, dividing by the negative outside multiplier, then compute the y-intercept separately.
- Dividing this equation by −3 keeps equality.
- Fractional zero inputs are exact.
- Do the absolute value before multiplying by −3.
- Set output zero: . Subtract 6: .This finds the inputs whose graph points reach the horizontal axis.
- Divide both sides by −3: .This isolates the distance. Equality stays equality under negative division.
- Write or .B = 2 > 0 permits two whole inside values.
- In the first equation subtract 1: . Divide by 2: .This finds the zero input on the right.
- In the second equation subtract 1: . Divide by 2: .This finds the zero input on the left.
- For the y-intercept use input 0: .This calculates the height on the vertical axis. The outside minus acts after the distance is found.
- Zeros: x = − and x =
- Zero set: {−, }
- x-intercepts: (−, 0) and (, 0)
- y-intercept: (0, 3)
Rung 5 of 5
Which constant removes the crossings?
For which real c does g(x) = −4|x + 6| + c have no x-intercepts?
What it asks. Find every choice of the constant c that keeps the graph from reaching height zero for any input x.
Show the steps and the answer
The plan. Set the output equal to zero, isolate the distance, and find when the number on the other side is negative.
- Plan. Set the output equal to zero, isolate the distance, and find when the number on the other side is negative.
- c is a constant choosing the corner height, rather than an input x to solve for.
- The largest output is c because the graph opens down.
- Dividing by positive 4 keeps the sign of c.
- Require zero height: .This tests whether any input can place the graph on the horizontal axis.
- Subtract c: . Divide by : .This isolates the distance. Its sign decides whether crossing inputs exist.
- No x-intercepts occur when , which is exactly c < 0.A negative distance has no solution. Since 4 is positive, c and c ÷ 4 have the same sign.
- Check the other choices: gives , so ; c > 0 gives two inside equations and two crossings.This shows that no zero or positive c belongs to the requested no-crossing choices.
- c < 0
- Interval for c: (−∞, 0)
- Set-builder notation: {c : c < 0}
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Zeros: output 0, solve for input. y-intercept: input 0, calculate output.
- For a|x − h| + k with a ≠ 0, opposite signs for a and k mean two crossings. k = 0 means one. Matching nonzero signs mean none. This gives the count without graphing.
- On an exam, answer the requested object. A zero is an x-value. An intercept is a point with two coordinates.
7 The trap
Substituting x = 0 when asked for zeros. That finds the y-intercept. For zeros set the output to 0 and leave x unknown.
Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.
Lesson 7 of 10
Less than B means between
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Imagine a dog on a leash attached to a post on a straight path. If the leash reaches four units, the dog can be on either side, but it must stay between the two farthest reachable positions. An absolute value inequality describes a whole set of positions. A less than sign means closer than the allowed distance. A less than or equal sign permits the farthest positions too. A compound inequality joins two comparisons. For a between answer, both comparisons must be true for the same position. This is the word 'and'. The answer is one uninterrupted stretch of the number line, called an interval. Its endpoint symbols tell you whether the ends belong.
2 Picture it
Reminder
Reminder: Letters naming whole expressions, Changing all three parts, Flipping after negative division, Endpoint notation
- Letters naming whole expressions. In |2x − 1| < 5, A names 2x − 1 and B names 5. Keep that whole A together.
- Changing all three parts. −4 ≤ x − 5 ≤ 4 becomes 1 ≤ x ≤ 9 after adding 5 everywhere.
- Flipping after negative division. −2x < 6 becomes x > −3. A three part chain has two signs to flip.
- Endpoint notation. 1 < x < 9 uses hollow dots and (1, 9); 1 ≤ x ≤ 9 uses filled dots and [1, 9].
3 Why
For B > 0, let A name the whole expression inside the bars. A distance less than B cannot reach B on the right or −B on the left. Both A > −B and A < B must hold, giving −B < A < B. Allowing equality includes the two boundary positions. Addition slides every quantity by the same amount and preserves order. Division by a negative turns the line around and reverses both comparisons, so the final chain may need reading from right to left.
4 The rule
For B > 0: |A| < B means ; means .
Both comparisons must hold: 'and'. A is everything inside the bars; B is the number on the other side.
The same idea, five ways
x is at most four units from five
x is between one and nine, including both ends.
- 1 ≤ x ≤ 9
- [1, 9]
- {x | 1 ≤ x ≤ 9}
- {x : 1 ≤ x ≤ 9}
A four unit leash attached at position five reaches positions one through nine.
The same idea, other ways
A post at 5 and a four-unit leash allow movement left to 1 and right to 9. You may stand anywhere in between; you cannot skip past either limit.
−4 ≤ A says the inside value cannot go too far left. A ≤ 4 says it cannot go too far right. Both guards must approve the same A, so the connector is 'and'.
The graph y = |x − 5| lies at or below y = 4 exactly between its two crossings. This turns a vertical comparison of outputs into a horizontal interval of inputs.
At x = 1 and x = 9 the distance is exactly 4. The condition |x − 5| ≤ 4 accepts equality. The condition |x − 5| < 4 rejects it. Interior inputs satisfy either condition.
| Form (B > 0) | Means | Write | Picture |
|---|---|---|---|
| |A| < B | Closer than B: between | One piece, open endpoints | |
| |A| ≤ B | At most B away: between | One piece, closed endpoints |
Part 1: Strict between
A shorter leash stops before either farthest position. A strict inequality uses < or > and leaves its boundary out. For a closer than question, both ends are excluded.
- For B > 0, |A| < B means −B < A < B.
- Strict endpoints use hollow dots and parentheses.
- For example, |x| < 2 gives −2 < x < 2; the harder shifted example follows.
Reminder
Reminder: Strict comparison
- Strict comparison. 3 < 4 is true; 4 < 4 is false. Equal distance fails a strict comparison.
Worked example
Strictly less than four from five
Solve |x − 5| < 4.
What it asks. Find every input closer than four units to five, with the ends left out.
Show the steps and the answer
The plan. Use a strict between chain and undo the subtraction of five.
- Plan. Use a strict between chain and undo the subtraction of five.
- The middle expression is x − 5.
- Distance exactly four does not pass a strict condition.
- Write .The whole inside must stay farther right than −4 and farther left than 4.
- Add 5 everywhere: , giving 1 < x < 9.This removes the subtraction and finds the allowed inputs without changing either strict sign.
- Write (1, 9).Parentheses say neither equality boundary is included.
- 1 < x < 9.
- Interval: (1, 9).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- A hollow dot means the boundary number is left out.
Part 2: Inclusive between
A full length leash permits standing at either farthest position. An inclusive inequality uses an equals bar, as in ≤ or ≥ with the numbers around it. The endpoint is allowed along with the positions inside.
- For B > 0, |A| ≤ B means −B ≤ A ≤ B.
- Finite endpoints are actual numbers, rather than infinity. Include an allowed finite endpoint with a filled dot and a bracket.
- For example, |x| ≤ 2 gives [−2, 2]; the score example uses the same idea around 80.
Reminder
Reminder: Names for variables
- Names for variables. In |S − 80| ≤ 20, S is a score, as R represented a resistance earlier.
Worked example
Scores near eighty
Scores within 20 points of 80 pass. Include the maximum distance. Write the condition and score interval.
What it asks. Write every score no more than twenty points from eighty, including the limits.
Show the steps and the answer
The plan. Measure the score's distance from eighty, use a between chain, and add eighty to each part.
- Plan. Measure the score's distance from eighty, use a between chain, and add eighty to each part.
- Use S for the score; a variable can have a letter other than x.
- The word 'include' permits equality at the two ends.
- Let S be the score and write .The bars measure the distance from the score to 80, and a passing distance can equal 20.
- Write .The score's signed difference must fit between the two permitted distance limits.
- Add 80 to every part: , giving .This restores the score itself and finds the lowest and highest passing scores.
- Write [60, 100].The filled endpoint choice records equality at both passing limits.
- 60 ≤ S ≤ 100
- Interval: [60, 100]
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- An equals bar means the end number counts.
Part 3: Read the same solution in three notations
Think of writing the same street address in words, in a map label, and on an envelope. Inequality notation, interval notation, and set-builder notation describe the same allowed numbers with different symbols. A set is a collection of numbers. Set-builder notation describes that collection by a condition. The vertical bar or the colon inside the braces means 'such that'; it has a different job from a pair of absolute value bars.
- {x | 1 ≤ x ≤ 9} reads 'the set of all real numbers x such that x is between 1 and 9, ends included'.
- {x : 1 ≤ x ≤ 9} has the same meaning; the colon avoids confusing the divider with absolute value bars.
- 1 ≤ x ≤ 9, [1, 9], and {x : 1 ≤ x ≤ 9} all name the same collection.
Reminder
Reminder: Set notation for individual answers
- Set notation for individual answers. {4} contains one number. A condition in {x : 1 ≤ x ≤ 9} selects every number in a whole interval.
Worked example
Put a between answer into set-builder notation
Write the solution 1 ≤ x ≤ 9 in interval notation and set-builder notation.
What it asks. Name the same allowed stretch using two other ways of writing it.
Show the steps and the answer
The plan. Keep the endpoints and their inclusion, then place the condition after 'such that'.
- Plan. Keep the endpoints and their inclusion, then place the condition after 'such that'.
- The interval runs from the smaller endpoint to the larger.
- Both comparison signs allow equality.
- Write [1, 9].Both end numbers belong, so both ends use brackets.
- Write {x | }, or {x : }.The condition after the divider selects exactly the same real numbers as the interval.
- Interval: [1, 9]
- Set-builder: {x | 1 ≤ x ≤ 9}
- Equivalent colon form: {x : 1 ≤ x ≤ 9}
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use a colon when an absolute value condition already contains a pair of bars.
5 How
- Get the bars alone, then check that B, the number on the other side, is positive. Zero or negative B needs the final lesson's cases.
- Write the three part inequality with −B on the left and B on the right. Keep equality if the question allows it.
- Undo each inside operation on all three parts. Dividing by a negative reverses both signs.
- Read the finished bounds from smaller to larger and write the interval.
- A strict sign excludes the endpoint: use a hollow dot and a parenthesis. An inclusive sign allows equality: use a filled dot and a bracket. Check the center and both endpoints in the original question.
Solve a between inequality
- Get the bars alone, then check that B, the number on the other side, is positive. Zero or negative B needs the final lesson's cases.
- Write the three part inequality with −B on the left and B on the right. Keep equality if the question allows it.
- Undo each inside operation on all three parts. Dividing by a negative reverses both signs.
- Read the finished bounds from smaller to larger and write the interval.
- A strict sign excludes the endpoint: use a hollow dot and a parenthesis. An inclusive sign allows equality: use a filled dot and a bracket. Check the center and both endpoints in the original question.
6 Worked example
Worked example
A distance interval with included endpoints
Solve |x − 5| ≤ 4.
What it asks. Find every number that is four or fewer units from five.
Show the steps and the answer
The plan. Write the between chain, add five to all three parts, and show whether the two ends count.
- Plan. Write the between chain, add five to all three parts, and show whether the two ends count.
- The center is five. The distance limit B is four.
- Less distance requires both a left limit and a right limit.
- The equals bar means the endpoints count.
- Write .A signed difference whose distance is at most 4 must be at least −4 and at most 4.
- Add 5 to all three parts: .This undoes the subtraction from x while sliding both comparison limits by the same amount.
- Simplify: .−4 + 5 = 1, −5 + 5 = 0, and 4 + 5 = 9. This finds every input that passes both limits.
- Write [1, 9].At either end the distance equals 4, and the stated inequality allows equality.
- 1 ≤ x ≤ 9.
- Interval: [1, 9].
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Strictly near zero
Solve |x| < 2.
What it asks. Find all positions fewer than two units from zero.
Show the steps and the answer
The plan. Use the strict between rule directly.
- Plan. Use the strict between rule directly.
- The inside expression is x itself.
- Distance exactly two is excluded.
- .These are all positions strictly less than two units from zero.
- Write .Strict comparisons exclude both finite endpoints.
Rung 2 of 4
Include shifted endpoints
Solve |x + 3| ≤ 2.
What it asks. Find all positions at most two units from −3.
Show the steps and the answer
The plan. Use an inclusive between chain and subtract three from every part.
- Plan. Use an inclusive between chain and subtract three from every part.
- x + 3 is x − (−3), so the center is −3.
- The ends count.
- .The limit is positive and equality is allowed, so the inside lies from −2 through 2.
- Subtract 3 everywhere: .Subtracting 3 from all three parts isolates x, so these bounds describe the allowed input positions instead of the inside difference.
Rung 3 of 4
A scaled inside expression
Solve |2x − 1| < 5.
What it asks. Find every input making the distance of 2x − 1 from zero smaller than five.
Show the steps and the answer
The plan. Use between, then undo subtracting one and multiplying by two.
- Plan. Use between, then undo subtracting one and multiplying by two.
- Treat 2x − 1 as one inside expression.
- A positive divisor keeps both signs.
- .Strictly less distance means a strict between inequality.
- Add 1: .Undo the subtraction on all three parts.
- Divide by 2: .Dividing every part by the positive 2 preserves order and isolates x, giving the allowed input interval.
Rung 4 of 4
Isolate, then reverse order
Solve 2|1 − 3x| + 1 ≤ 9.
What it asks. Find inputs making the whole expression at most nine.
Show the steps and the answer
The plan. Undo the operations outside the bars, then solve the between chain. The negative inside multiplier flips both signs.
- Plan. Undo the operations outside the bars, then solve the between chain. The negative inside multiplier flips both signs.
- Subtract one first, then divide by two.
- Divide every part by −3 and reverse both signs.
- Write the final bounds from smaller to larger.
- Subtract 1: .This removes the outside addition and keeps the comparison.
- Divide by 2: .This leaves the whole absolute value alone, and the positive divisor preserves order.
- Write .Distance at most 4 gives two simultaneous inside limits.
- Subtract 1 everywhere: .This undoes the inside addition while changing every part equally.
- Divide every part by −3: .The negative divisor reverses both signs. −5 ÷ (−3) = and 3 ÷ (−3) = −1.
- Read in increasing order: .This identifies every allowed input in the order used by interval notation.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: less thAND. A smaller distance stays between two limits, and both limits must hold.
- Write the same arithmetic underneath all three parts. This prevents leaving one endpoint unmoved.
- Check an endpoint in the original inequality before choosing its bracket or parenthesis.
7 The trap
Changing only the middle of a three-part inequality, or treating < and ≤ alike. Every algebra move acts on all three parts, and the original sign decides whether the boundary belongs.
Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.
Lesson 8 of 10
More than B means outside
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a safety zone around a construction site on a straight road. If you must stay more than seven units from its center, you may go far left or far right. You cannot stand between the two boundary positions. A greater than absolute value inequality makes this outside choice. Its answer has two separate stretches when the inside is a line with x in it. The word 'or' says either stretch is acceptable. You do not have to stand in both at once. In interval notation, the union symbol ∪ collects the two permitted stretches into one solution set. If the sign includes an equals bar, standing on the safety boundary is allowed too. Each outside stretch is a ray: it continues forever in one direction.
2 Picture it
Reminder
Reminder: Letters naming whole expressions, Union and endpoint notation, Negative multiplication
- Letters naming whole expressions. For |2x + 1| > 7, A means 2x + 1 and B means 7.
- Union and endpoint notation. (−∞, −4) ∪ (3, ∞) accepts either outside ray. Parentheses leave −4 and 3 out.
- Negative multiplication. −4x ≤ −7 becomes x ≥ after dividing by −4.
3 Why
If B > 0 and A is farther than B from zero, A is either to the left of −B or to the right of B. That is A < −B or A > B. A value between those boundaries has distance at most B and cannot satisfy the strict outside condition. The two outside conditions cannot both hold for the same A because −B < B. Asking for 'and' would reject every input. The union collects all inputs accepted by either branch, which is why it matches 'or'.
4 The rule
For B > 0: |A| > B means or A > B; means or .
For an inside line with a nonzero number multiplying x, solve each alternative and join its two outside intervals with .
The same idea, five ways
two x plus one is more than seven units from zero
x is less than negative four or greater than three.
- |2x + 1| > 7
- 2x + 1 < −7 or 2x + 1 > 7
- x < −4 or x > 3
- {x | x < −4 or x > 3}
- {x : x < −4 or x > 3}
You can clear a safety zone by moving beyond its left edge or beyond its right edge.
The same idea, other ways
Beyond the left edge or beyond the right edge is safe. The middle is forbidden. These are alternatives, so use 'or'.
For |2x + 1| > 7, compare the V's height with the flat line at 7. Only the distant arms stand above that line.
For |x| > 3, x = 4 and x = −4 work because each has distance 4. x = 3 fails because its distance equals 3. x = 0 fails because its distance is 0.
| Form (B > 0) | Means | Write | Picture |
|---|---|---|---|
| |A| > B | Farther than B: outside | A < −B or A > B | Two pieces, joined by ∪ |
| |A| ≥ B | At least B away: outside | A ≤ −B or A ≥ B | Two pieces, boundaries included |
Part 1: Strict outside
Farther than the limit permits either distant side but rejects the boundary itself.
- For B > 0, |A| > B gives A < −B or A > B.
- Strict finite boundaries, actual end numbers, use hollow dots and parentheses.
Reminder
Reminder: Strict signs
- Strict signs. 4 > 3 passes, while 3 > 3 fails.
Worked example
Beyond three units
Solve |x| > 3.
What it asks. Find all numbers farther than three units from zero.
Show the steps and the answer
The plan. Select the left and right rays and exclude the distance three endpoints.
- Plan. Select the left and right rays and exclude the distance three endpoints.
- The word 'farther' requires a greater distance.
- Only one of the outside alternatives has to hold.
- or x > 3.The distance must exceed three on one side of zero.
- Write .Either outside interval is allowed, so join them with ∪. The boundary distance equals 3 and fails the strict greater than comparison.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- A strict outside answer uses two hollow boundary dots.
Part 2: Inclusive outside
At least the limit allows the boundary as well as the more distant positions.
- |A| ≥ B gives A ≤ −B or A ≥ B when B > 0.
- Infinity is a direction without an endpoint, so it always uses a parenthesis.
Reminder
Reminder: Infinity
- Infinity. ∞ means continuing without an end number. It always takes a parenthesis, even when the finite end is included.
Worked example
Include both outside boundaries
Solve |x| ≥ 5.
What it asks. Find every number five or more units from zero.
Show the steps and the answer
The plan. Select both outside rays and include the two distance five boundaries.
- Plan. Select both outside rays and include the two distance five boundaries.
- At least includes equality.
- Infinity never receives a bracket.
- or .Both distances equal to five and larger than five are allowed.
- Write .Finite endpoints are included; infinity cannot be included as a number.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- At least means a filled dot at each outside boundary.
5 How
- Get the bars alone and inspect B, the number on the other side. Use this method when B is positive.
- Write the left outside inequality and the right outside inequality, connected by 'or'. Each alternative is a branch.
- Solve each branch separately. Multiplying or dividing by a negative flips that branch's comparison sign.
- Put the resulting intervals in order from left to right and join them with ∪.
- Infinity is a direction, not an actual endpoint, so it always uses a parenthesis. At each finite boundary, an actual number, use a bracket only when equality passes the original comparison.
Solve an outside inequality
- Get the bars alone and inspect B, the number on the other side. Use this method when B is positive.
- Write the left outside inequality and the right outside inequality, connected by 'or'. Each alternative is a branch.
- Solve each branch separately. Multiplying or dividing by a negative flips that branch's comparison sign.
- Put the resulting intervals in order from left to right and join them with ∪.
- Infinity is a direction, not an actual endpoint, so it always uses a parenthesis. At each finite boundary, an actual number, use a bracket only when equality passes the original comparison.
6 Worked example
Worked example
Two outside solution intervals
Solve |2x + 1| > 7.
What it asks. Find every input for which 2x plus one is more than seven units from zero.
Show the steps and the answer
The plan. Write two outside alternatives, solve each, and join the two allowed intervals.
- Plan. Write two outside alternatives, solve each, and join the two allowed intervals.
- The right side B is positive seven.
- Use 'or', because either outside direction works.
- The divisor two is positive, so each comparison sign stays.
- Write or .An inside value more than seven units from zero must lie beyond one of the two signed boundaries.
- Left branch: subtract 1 to get .This removes the inside addition without changing order.
- Divide by 2: .The positive divisor leaves the sign unchanged and isolates every input passing the left alternative.
- Right branch: subtract 1 to get 2x > 6.The same subtraction removes the inside addition in the other alternative.
- Divide by 2: x > 3.This finds every input passing the right alternative.
- Write .Either alternative qualifies, and both finite boundaries fail the strict comparison.
- x < −4 or x > 3
- Interval: (−∞, −4) ∪ (3, ∞)
- Set-builder: {x : x < −4 or x > 3}
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Outside around zero
Solve |x| > 2.
What it asks. Find every position farther than two units from zero.
Show the steps and the answer
The plan. Use the strict outside rule directly.
- Plan. Use the strict outside rule directly.
- Keep both directions.
- The two distance two boundaries do not count.
- or x > 2.Distances greater than two lie on the two outside rays.
- Write .The strict sign excludes the two-unit boundaries.
Rung 2 of 4
Shifted inclusive outside
Solve |x + 2| ≥ 3.
What it asks. Find all numbers at least three units from −2.
Show the steps and the answer
The plan. Use inclusive outside alternatives and subtract two in each.
- Plan. Use inclusive outside alternatives and subtract two in each.
- x + 2 measures from −2.
- Equality includes both boundaries.
- or .The distance includes the boundary and both farther sides.
- Subtract 2: or .Subtracting 2 from both sides of each branch undoes the + 2 inside the bars.
Rung 3 of 4
Isolate an outside scale
Solve 2|3x − 2| − 1 > 7.
What it asks. Find inputs for which the whole expression is greater than seven.
Show the steps and the answer
The plan. Undo outside operations, use two outside alternatives, and solve each.
- Plan. Undo outside operations, use two outside alternatives, and solve each.
- Undo minus one before times two.
- All divisors in this problem are positive.
- Add 1: .This removes the outside subtraction and reveals the scaled distance.
- Divide by 2: .The bars now stand alone; positive division preserves the comparison.
- Write or .A distance greater than 4 requires either outside alternative.
- Add 2 in both alternatives: or 3x > 6.This removes the inside subtraction.
- Divide each by 3: or x > 2.Positive division isolates the allowed inputs in both branches without flipping either sign.
Rung 4 of 4
An inside negative reverses each branch
Solve |2 − 4x| ≥ 5.
What it asks. Find inputs making 2 minus four x at least five units from zero.
Show the steps and the answer
The plan. Write inclusive outside alternatives, then undo two and divide by negative four.
- Plan. Write inclusive outside alternatives, then undo two and divide by negative four.
- Dividing by −4 flips each branch's comparison.
- Put the left ray first in the final union.
- or .The inclusive outside condition uses two alternatives.
- Subtract 2: or .Both branches need the same addition undone.
- Divide by : or .Negative division reverses each branch's order.
- Write the left piece first.The smaller boundary belongs at the left in interval notation.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: greatOR. Greater distance accepts a far left position or a far right position.
- Draw both allowed rays before writing the union. This catches a missing branch.
- Test one input on each ray and one in the rejected middle.
7 The trap
Using 'and' for an outside condition. No x can be both less than −4 and greater than 3. Use 'or', and use ∪ to keep both permitted pieces.
Lesson 9 of 10
Use boundaries and graphs to find positive or negative outputs
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Picture a road crossing sea level. To find where it lies underwater, mark where it meets sea level. Those crossings separate the road into stretches. Then inspect a spot in each stretch to see whether the road is above or below. A boundary point plays that separating role in an inequality. A test point is a sample input in a stretch. A V has connected arms with no jumps, so it cannot move from above a comparison height to below it without crossing that height. The same method tells a shop which prices leave money after costs and which lose money. Positive output lies above zero. Negative output lies below zero.
2 Picture it
Reminder
Reminder: Negative fractions, Flipping inequalities, Set-builder notation, Points on the axes
- Negative fractions. − × 9 = −, and 3 = , so − + = −.
- Flipping inequalities. Multiplying both sides of −|A| < −3 by −2 gives |A| > 6.
- Set-builder notation. {x | x < 1} and {x : x < 1} both mean all real x such that x < 1. One divider is different from two absolute value bars.
- Points on the axes. An x-intercept has output 0. Its input is the boundary number used in the interval answer.
3 Why
For a V and a horizontal line, their height difference has no jumps or breaks. This is called continuous. If that difference changed from positive to negative within an interval, it would have to pass through zero there. Solving their equality finds all such zero points first. With those points removed, a test point reveals the sign on each remaining interval. The graphical approach compares heights; the algebraic approach locates exact boundaries. A negative multiplier flips the comparison because it reverses number order. A downward V is negative outside its crossings because its arms descend away from its top.
4 The rule
Find boundaries by solving the corresponding equality.
Test one input inside each interval between boundaries, or compare graph heights. For f(x) < 0, choose the portions below the x-axis; for f(x) > 0, choose those above. Negative multiplication or division flips every comparison sign. Allow a boundary only when its original comparison permits equality.
The same idea, five ways
f of x is less than zero
Find the inputs whose outputs are negative, so their graph points lie below the x-axis.
- f(x) < 0
- x < − or x >
- {x | x < − or x > }
- {x : x < − or x > }
Find the stretches of a road that lie below sea level.
The same idea, other ways
Zero height is sea level. Above it means positive output; below it means negative output. The crossing inputs mark where the sign can change.
Read a test input from the top row and its output directly underneath. A negative output selects that input's whole interval once every equality boundary has been found.
Hold the input fixed, then compare graph heights vertically. A V below the line y = 4 has an output smaller than 4. Its crossing inputs are where the heights match.
| Interval for x | Test input x | Inside 4x − 5 | Output f(x) | Passes f(x) < 0? |
|---|---|---|---|---|
| Yes | ||||
| 1 | No | |||
| 3 | 7 | Yes |
Part 1: Boundary and test-point method
Fenceposts divide a road into stretches. Solve the equality first to place every fencepost, then sample one input in each open stretch. The samples tell which stretches pass because these connected arms cannot cross the comparison height without another equality point.
- For |x − 5| < 4, solve the equality |x − 5| = 4 to find boundaries 1 and 9.
- The three open intervals are (−∞, 1), (1, 9), and (9, ∞).
- The test inputs 0, 6, and 11 are shown in columns of the distance table.
- For |x − 5| ≤ 4, the same interior interval works and its two boundaries are included.
Reminder
Reminder: Reading a table
- Reading a table. An input is in the top row. Its output is directly beneath it in the same column.
Worked example
Read the three interval tests
Use test inputs 0, 6, and 11 to solve |x − 5| < 4.
What it asks. Use one sample in each interval to find where the distance from five is smaller than four.
Show the steps and the answer
The plan. Find the equality boundaries, read the sample columns, then keep only intervals with distance below four.
- Plan. Find the equality boundaries, read the sample columns, then keep only intervals with distance below four.
- Equality finds the boundaries; it does not decide which side passes.
- A strict comparison excludes the boundary itself.
- Set to find equality boundaries. Write or .A comparison can switch sides only where the V reaches height 4, and inside values −4 and 4 reach that height.
- Add 5 in each equation: or . Check .This finds and confirms the two boundary inputs.
- Test the left interval using : . Read 5 in the column under 0.0 lies below 1, and 5 is greater than 4, so that interval fails.
- Test the middle using : . Read 1 in the column under 6.6 lies between 1 and 9, and 1 is smaller than 4, so the middle interval passes.
- Test the right interval using : . Read 6 in the column under 11.11 lies above 9, and 6 is greater than 4, so that interval fails.
- Keep (1, 9) and exclude the boundaries.Only the middle test passes, and the boundary distance equals 4 rather than being smaller than 4.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Pick test inputs with short arithmetic, but make sure each is inside its own interval.
Part 2: Graphical comparison
Compare two road heights at the same horizontal position. The lower graph has the smaller output. Equality means the two heights meet, so inclusive comparisons keep their crossing inputs. A drawing shows the shape of the solution, while algebra supplies exact fractions when a screen is unclear.
- Graphical approach: read relative heights.
- Algebraic approach: solve the distance comparison exactly.
- Use exact algebra for fractions that a sketch cannot locate precisely.
Reminder
Reminder: Input and output
- Input and output. At x = 6, the V has output 1 and the horizontal line has output 4, so 1 < 4.
Worked example
At or below a comparison height
Where is y = |x − 5| at or below y = 4?
What it asks. Find where the V's height is no higher than the flat height four.
Show the steps and the answer
The plan. Find the crossing inputs and read where the V lies at or below the comparison line.
- Plan. Find the crossing inputs and read where the V lies at or below the comparison line.
- Both heights must be compared at the same input.
- At or below includes the crossings.
- Find crossings from : or , so adding 5 gives or .This locates every input at which the two heights are equal.
- Substitute the crossing inputs: .Both proposed boundaries really lie on the comparison line.
- Read the picture between the crossings. At ; the rising arms remain below the line until they reach 1 and 9.The V's lowest point lies in the middle and its two straight arms reach height 4 only at the boundaries.
- Keep , giving [1, 9].At or below includes equality at both crossings.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use a graph for the regions and algebra for exact boundary fractions.
Part 3: Positive and negative function outputs
Sea level separates above from below. For a graph, the horizontal axis has output zero. Positive output is above that axis and negative output is below it. A vertical reflection turns an upward V upside down, so its distant arms can be negative even when its middle is positive.
- f(x) > 0 means graph above the x-axis.
- f(x) < 0 means graph below the x-axis.
- f(x) = 0 is a boundary for these strict sign questions.
Reminder
Reminder: Reflection
- Reflection. The outside minus in −|x| takes the opposite after the distance has been measured.
Worked example
Both signs of a reflected graph
Where is f(x) = −|x| + 2 positive, and where is it negative?
What it asks. Find the intervals where the reflected V has positive height and the intervals where it has negative height.
Show the steps and the answer
The plan. Find both zero inputs and test a sample in each of the three intervals.
- Plan. Find both zero inputs and test a sample in each of the three intervals.
- A zero separates regions; it is not positive or negative itself.
- Use zero as a middle sample and −3 and 3 as outside samples.
- Set to find the crossings. Subtract 2: . Multiply by : .A crossing has output zero. Undoing the outside operations exposes its exact distance.
- The inside x equals or 2. Check .Both positions have distance 2, and substitution confirms both crossing inputs.
- Test : . Read that negative output under .−3 is in the left interval and its output is below zero.
- Test : . Read the positive output under 0.0 is in the middle interval and its output is above zero.
- Test : . Read the negative output under 3.3 is in the right interval and its output is below zero.
- Select the middle for positive output and the two outside intervals for negative output. Exclude both zeros in both answers.The sample signs select their intervals, and zero fails either strict sign question.
- Positive: (−2, 2).
- Negative: (−∞, −2) ∪ (2, ∞).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Read positive and negative vertically, above and below the horizontal axis.
Part 4: Prices that make a shop lose money
A shop can sell too cheaply or price an item so high that sales disappear. A model of its profit can rise toward one best price and fall on either side. Profit means money left after costs. A negative profit is a loss. In this model, finding negative outputs tells you which prices lose money.
- P(x) = −2|x − 50| + 40 models a best profit of 40 at price 50.
- P(x) < 0 asks for loss regions; it does not ask for negative prices.
Reminder
Reminder: Domain
- Domain. The domain is the permitted input set. Here it is x ≥ 0, so a negative price is not allowed.
Worked example
Loss on either side of the best price
A shop models profit by P(x) = −2|x − 50| + 40 for nonnegative prices x in dollars. Which prices make its profit negative?
What it asks. Find the allowed prices at which the shop loses money.
Show the steps and the answer
The plan. Solve the negative output comparison, then keep only prices zero or more because the model restricts the inputs.
- Plan. Solve the negative output comparison, then keep only prices zero or more because the model restricts the inputs.
- Subtract forty first.
- Dividing by negative two flips the sign.
- Keep only algebra answers also allowed by the stated nonnegative price domain.
- Write and subtract 40: .A negative profit is a loss, and subtraction removes the outside addition.
- Divide by : .Negative division reverses the sign and leaves the distance alone.
- Write or . Add 50: x < 30 or x > 70.Distance greater than 20 accepts either far side. Adding 50 finds the price limits.
- Check the boundaries: .These prices cover costs exactly and do not make a negative profit.
- Keep or x > 70, giving .The model permits only nonnegative prices, so drop the negative inputs from the first algebra interval.
- 0 ≤ x < 30 or x > 70
- Price intervals: [0, 30) ∪ (70, ∞)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- After solving a word problem, keep the answer inside the input restrictions stated in the question.
5 How
- Decide which heights to compare, such as f(x) and 0, or |x − 5| and 4.
- Set the two heights equal and solve. This finds every input at which the graph reaches the comparison height. Substitute those inputs back to confirm the crossings.
- List the open intervals separated by those boundary inputs. Open means the boundary itself is not part of the interval being tested.
- Pick one test point inside each interval and substitute it into the original comparison.
- Keep every interval whose test point passes. Include a boundary only if substituting it into the original comparison passes too.
- State the allowed inputs as an inequality, interval, or set-builder condition. If more than one interval works, use 'or' and ∪.
Find positive or negative output regions
- Decide which heights to compare, such as f(x) and 0, or |x − 5| and 4.
- Set the two heights equal and solve. This finds every input at which the graph reaches the comparison height. Substitute those inputs back to confirm the crossings.
- List the open intervals separated by those boundary inputs. Open means the boundary itself is not part of the interval being tested.
- Pick one test point inside each interval and substitute it into the original comparison.
- Keep every interval whose test point passes. Include a boundary only if substituting it into the original comparison passes too.
- State the allowed inputs as an inequality, interval, or set-builder condition. If more than one interval works, use 'or' and ∪.
6 Worked example
Worked example
A reflected function below zero
For f(x) = −|4x − 5| + 3, find where f(x) < 0.
What it asks. Find every input whose output from this downward V is below zero.
Show the steps and the answer
The plan. Get the bars alone, find the equality crossings, test the three intervals, and exclude the zeros.
- Plan. Get the bars alone, find the equality crossings, test the three intervals, and exclude the zeros.
- Subtract three before multiplying by negative two.
- The negative multiplier flips the less than sign.
- The first and third output columns are negative.
- Subtract 3 from : .This undoes the outside vertical shift before comparing the distance.
- Multiply both sides by : .−2 × (−) = 1 and −2 × (−3) = 6. The negative multiplier flips the comparison.
- To find the crossing boundaries, solve the equality .At distance 6 the original output is − × 6 + 3 = 0, exactly the comparison height.
- Write or .Only inside values −6 and 6 give distance 6.
- Add 5: or . Divide by 4: or .These operations undo the inside shift and multiplier to find both crossing inputs.
- Check the crossings: , and . Each gives .Substitution confirms that both boundary inputs actually meet the horizontal axis.
- Separate the inputs into , and .With every zero found, an output cannot change sign inside one of these intervals without another crossing.
- Left test : , so the inside table's column under holds . Its distance is 9. Then .Multiplying by negative one half gives −, and writing 3 as lets the halves subtract. The negative result selects the left interval.
- Middle test : . Then . Read the positive output in the column under 1.1 is between the exact boundaries, and its positive output rejects that entire middle interval.
- Right test : . Then . Read the negative output in the column under 3.3 is beyond the right boundary, and the negative result selects the right interval.
- Find the corner by setting : add 5 and divide by 4 to obtain . Substitute: .Zero inside identifies the V's turning input. Substitution gives its height and explains the graph's corner (, 3).
- Moving one unit farther from the corner changes by 4. The height change is .Factoring 4x − 5 = 4(x − ) gives the same function as −2|x − | + 3, so the picture's arms descend two units per step away.
- Keep the two outside intervals and leave their boundary inputs out.The outside tests are negative, while each boundary output equals zero and fails the strict question.
- x < − or x >
- Interval: (−∞, −) ∪ (, ∞)
- Set-builder: {x : x < − or x > }
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Parent graph above zero
Where is f(x) = |x| positive?
What it asks. Find where the basic distance graph is above zero.
Show the steps and the answer
The plan. Find its only zero and exclude that one input.
- Plan. Find its only zero and exclude that one input.
- Every input other than zero has positive distance.
- The word positive excludes output zero.
- gives .Setting the output to zero finds the only point separating the two positive stretches. Zero distance occurs only at x = 0; substitution gives |0| = 0.
- Every x < 0 and every x > 0 gives positive distance.Every position other than zero has positive distance from the origin.
Rung 2 of 4
Upward V below zero
Where is f(x) = |x − 2| − 3 negative?
What it asks. Find where the upward V lies below the horizontal axis.
Show the steps and the answer
The plan. Find its two crossings and test the middle and both outside intervals.
- Plan. Find its two crossings and test the middle and both outside intervals.
- Set output zero to find boundary inputs.
- The center lies in the middle interval.
- Set |x − 2| − 3 = 0 to find the crossings. Add 3: .Output zero marks the boundaries where the sign can change.
- Write or . Add 2: or .These are the only inside values at distance 3, so solving finds both boundary inputs.
- Check and .Both proposed boundaries really lie on the horizontal axis.
- Read the test columns: , and .The table shows a positive left sample, a negative middle sample, and a positive right sample.
- Keep .Only the middle interval has negative output, and its zero endpoints do not pass the strict comparison.
Rung 3 of 4
Downward V above zero
Where is f(x) = −3|x + 2| + 6 positive?
What it asks. Find inputs making the downward V above zero.
Show the steps and the answer
The plan. Isolate the distance, flip after negative division, and solve the resulting between chain.
- Plan. Isolate the distance, flip after negative division, and solve the resulting between chain.
- Undo the plus six first.
- Negative three outside the bars reverses the comparison.
- Subtract 6 from : .This removes the outside shift before inspecting the distance.
- Divide by : .The negative divisor flips the greater than sign to a less than sign.
- Write .Distance less than two requires both inside limits.
- Subtract 2 everywhere: .This removes the inside addition and identifies every input giving positive output.
Rung 4 of 4
A fractional reflected graph including its zeros
Where is f(x) = −|2x − 6| + 3 at least zero?
What it asks. Find every input making the output zero or positive.
Show the steps and the answer
The plan. Undo the outside shift and negative half, solve between, and include the two crossing inputs.
- Plan. Undo the outside shift and negative half, solve between, and include the two crossing inputs.
- At least zero allows equality.
- Multiplying by negative two flips the sign.
- Keep both ends after solving the between chain.
- Write and subtract 3: .The question compares the entire output with zero, and subtraction removes the shift.
- Multiply by −2: .The multiplier cancels the negative half and reverses the sign, while retaining equality.
- Write .Distance at most six gives a between chain with both boundaries included.
- Add 6 everywhere: .This removes the inside subtraction from all comparisons.
- Divide every part by 2: .The positive divisor isolates the inputs whose outputs are at least zero.
- Write [0, 6].Both endpoint outputs are zero and therefore pass the stated inclusive comparison.
- 0 ≤ x ≤ 6
- Interval: [0, 6]
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- One test point per interval, after every crossing is found.
- Check the test point in the original formula. That catches an incorrect sign flip made while isolating.
- Negative output means below the x-axis. It does not mean a negative input.
7 The trap
Multiplying by −2 and keeping the less than sign would select the center, where this function is positive. Flip the sign immediately and confirm your answer with an actual output from each chosen interval.
Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.
Lesson 10 of 10
When B is zero or negative
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Before choosing between or outside, compare the requested distance with zero. Think of a ruler that begins at zero and has no negative lengths. A length smaller than a negative number is impossible. Every length is greater than a negative number, including a length of zero. Zero itself needs care. A distance at most zero forces you to stay at the center. A distance greater than zero allows every place except the center. A distance at least zero allows every place. These cases follow from what the ruler can measure. Inspect B, the number on the other side, after clearing operations outside the bars, because that arithmetic can change it.
2 Picture it
Reminder
Reminder: Letters in the rules, Nonnegative, Equality versus inequality, One answer and no answers
- Letters in the rules. A names the whole inside, and B names the number on the other side. In |2x − 1| ≤ 0, A is 2x − 1 and B is 0.
- Nonnegative. Nonnegative means zero or positive. Every absolute value has that property.
- Equality versus inequality. Dividing −2x = 6 by −2 gives x = −3; equality stays equality. Dividing −2x < 6 gives x > −3.
- One answer and no answers. {6} is the set containing the number 6. ∅ is the empty set, with no numbers in it.
3 Why
Every inside expression A has |A| ≥ 0 wherever A is defined. If B < 0, every such distance is larger than B, so smaller than or equal to B is impossible. At B = 0, equality holds exactly when A = 0; every other distance is positive. These facts cover all four inequality signs. They also explain the equation cases: negative B is impossible, and zero B requires A = 0. Our inside lines are defined for all real inputs, so a condition that is always true gives the whole real line, (−∞, ∞).
4 The rule
If B < 0: , |A| < B, and have no solution; |A| > B and hold for every allowed input.
If : and mean ; |A| < 0 has none; |A| > 0 means ; holds for every allowed input.
The same idea, five ways
the distance is at most zero, so the inside must be zero
Only the center has zero distance; every other position has positive distance.
- x = 6
- {6}
- |x − 6| > 0 means x ≠ 6
- {x : x ≠ 6}
A leash of length zero keeps you at its post. Being a positive distance from the post means standing anywhere else.
The same idea, other ways
The first possible ruler length is zero. A negative comparison number sits below every measurable length. So a smaller distance is impossible and a greater distance is automatic.
For |x − 2| > −1, try the smallest distance at x = 2: |0| = 0 > −1. Larger distances also pass, so every real input works.
|x − 2| ≤ 0 forces x = 2. |x − 2| > 0 permits every x except 2. |x − 2| < 0 permits none. |x − 2| ≥ 0 permits all real x.
| Comparison | Negative B | B = 0 |
|---|---|---|
| |A| < B | No solution | No solution |
| |A| ≤ B | No solution | Solve A = 0 |
| |A| > B | Every allowed input | All allowed inputs except A = 0 |
| |A| ≥ B | Every allowed input | Every allowed input |
Part 1: B negative
Every length sits at zero or above. A negative B lies below the whole ruler. Equality and a smaller distance cannot reach it. A greater distance is larger than it even at zero.
- |A| < B or |A| ≤ B with B < 0: no solution.
- |A| > B or |A| ≥ B with B < 0: all allowed inputs.
- |A| = B with B < 0 also has no solution, because it requires a negative distance.
Reminder
Reminder: Comparing negative numbers
- Comparing negative numbers. 0 > −1, so any number zero or greater is also greater than −1.
Worked example
Opposite comparisons with negative B
Solve |x − 2| ≤ −1 and |x − 2| > −1.
What it asks. First find inputs giving distance at most negative one. Then find inputs giving distance greater than negative one.
Show the steps and the answer
The plan. Compare the smallest possible distance, zero, with negative one.
- Plan. Compare the smallest possible distance, zero, with negative one.
- No distance is negative.
- A greater than sign can pass even when a negative equality cannot.
- The first has no solution.Every absolute value is at least 0, and 0 is larger than −1.
- The second holds for every real x.Even the smallest possible distance 0 exceeds −1.
- For |x − 2| ≤ −1: no solution
- Set: ∅
- For |x − 2| > −1: every real x
- Interval: (−∞, ∞)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Say the comparison aloud: a distance greater than a negative number is always possible.
Part 2: B zero
A zero length leash keeps you at its post. A requirement for positive distance sends you anywhere except the post. At a zero B, inspect whether equality is required, forbidden, or allowed along with every positive distance.
- |A| = 0 and |A| ≤ 0 both mean A = 0.
- |A| > 0 means A ≠ 0. The symbol ≠ means 'not equal to'.
- |A| < 0 is impossible. |A| ≥ 0 accepts every input where A is defined.
Reminder
Reminder: Nonzero
- Nonzero. Nonzero means any number except 0. Its absolute value is positive.
Worked example
All positions except the center
Solve |x − 2| > 0.
What it asks. Find all positions whose distance from two is positive.
Show the steps and the answer
The plan. Find the single zero distance input and leave it out of the real line.
- Plan. Find the single zero distance input and leave it out of the real line.
- ≠ means not equal to.
- The excluded center separates two open rays.
- Find the zero distance input from : add 2 to obtain .Positive distance excludes exactly the inputs whose inside equals zero, so solving locates the one input to remove.
- Check .The proposed excluded input really has zero distance and fails the question.
- Keep every , meaning x < 2 or x > 2.Every other real number has a nonzero inside and therefore positive absolute value.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Solve the inside equal to zero to locate the center. Then decide whether this question keeps or removes it.
Part 3: When the outside factor is zero
If you flatten both ramps completely, they stop making a V. In a|x − h| + k, choosing a = 0 removes the distance part. Every input then gives the same height k. This is a constant function, a flat horizontal line. The choice of h cannot create a corner because zero times any distance is still zero.
- If a = 0, f(x) = 0|x − h| + k = k, a constant function with no unique corner.
- Domain: (−∞, ∞). Range: {k}, a set containing the one output k.
- If k ≠ 0 there are no zeros. If k = 0, every real input is a zero.
Reminder
Reminder: One member set
- One member set. {3} lists the single produced output 3; it does not mean an interval.
The same idea, five ways
zero times the distance plus k
Every allowed input produces the same output k.
- Domain: (−∞, ∞)
- Range: {k}
A flattened pair of ramps becomes one level road.
Worked example
A flattened V
For f(x) = 0|x − 7| + 3, find the domain, range, and zeros. What changes if the outside addition 3 is replaced by 0?
What it asks. Describe the permitted inputs, produced outputs, and output zero inputs when the distance term is multiplied by zero.
Show the steps and the answer
The plan. Reduce each function to its constant output before finding the requested sets.
- Plan. Reduce each function to its constant output before finding the requested sets.
- Zero times any distance is zero.
- A constant graph reaches output zero only if its constant height is zero.
- Reduce .Every distance is multiplied by zero, leaving only the outside addition.
- The domain is every real number and the range is {3}.Every input is permitted, and every one produces the same single output 3.
- There are no zeros because solving would require .Setting the output to zero asks for horizontal-axis crossings, but the height never equals zero.
- Replacing the addition by zero gives . Its domain is every real input, its range is {0}, and every real input is a zero.The flat graph now lies on the horizontal axis, and substituting any input gives output zero.
- For f(x) = 3: domain (−∞, ∞)
- Range: {3}
- Zeros: none
- For g(x) = 0: domain (−∞, ∞)
- Range: {0}
- Zeros: every real input
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The usual zero, one, or two x-intercepts rule describes a genuine V, with a ≠ 0. Check a before applying that count.
Part 4: Study priorities and a printable reference after the lessons
Pack for this section the way you pack for a short trip. Keep the few ideas you need constantly in your pocket. Learn how to rebuild the details from those ideas. Keep a compact reference for checking notation during practice. The three lists below separate those jobs. For a closed-book exam, use the reference while studying, then cover it and explain each line. You do not need to memorize every worked answer or every transformed V. You can rebuild them from distance, the corner, and the two straight arms.
- know cold
Absolute value is nonnegative distance. Memory device: distance has size, direction has sign. This explains |−6| = 6 and |0| = 0.
Isolate before splitting. Memory device: alone, then two roads. This keeps outside arithmetic from entering the two cases.
A positive number B gives two inside values, a number B equal to 0 gives one, and a negative number B gives none. Memory device: two, one, none. This follows from the two sides of home.
Less than means between with and; greater than means outside with or, for a positive limit. Memory device: less thAND, greatOR. This remembers whether one region or two regions work.
Multiplying or dividing an inequality by a negative reverses its sign. Memory device: a negative turns the street around. This remembers that left and right trade places.
A bracket includes an endpoint; a parenthesis excludes it. Memory device: a bracket grabs. This remembers whether equality is allowed. - understand, then rebuild it when needed
Rebuild |x| = x for x ≥ 0 and |x| = −x for x < 0 from distance, because the negative address needs its direction removed.
Rebuild the corner and arm slopes of a|x − h| + k from x = h and a one-unit step, because zero inside the bars marks the turn.
Rebuild shifts, reflection, horizontal scaling, domain, and range from the parent V, because these describe movements or changes in its two arms.
Rebuild an equation from a corner and a second point by substitution, because the point supplies the missing stretch factor a.
Rebuild zeros and positive or negative regions from boundaries and a graph or test point, because outputs can change sign only through a zero.
Do not memorize each finished graph or individual answer. These can be rebuilt from the picture and a few arithmetic steps. - put on the cheat sheet
Keep the V formula, the equation cases, the between and outside cases, and endpoint notation together, because these are the short lines you compare during practice.
Keep the zero and negative limit cases beside them, because the positive-limit shortcuts do not cover those cases.
Keep slope, percent tolerance, and the reciprocal of a negative fraction visible, because arithmetic slips can spoil an otherwise correct solution.
Use the printable reference below as one page. For a closed-book exam, practice rebuilding it from memory rather than bringing it. - A small set of pictures explains the whole reference. Distance explains the cases. A corner and one step explain the V. Number-line order explains inequalities and endpoints. The compact sheet records the results so you can compare your reasoning during practice.
One-page cheat sheet: absolute value functions
Meaning: |x| is distance from 0. |x − c| is distance from c. Distance is always ≥ 0.
Piecewise: |x| = x for x ≥ 0; |x| = −x for x < 0.
Graph: f(x) = a|x − h| + k, a ≠ 0. Corner (h, k). Right arm slope a; left arm slope −a. Up if a > 0; down if a < 0. Domain (−∞, ∞). Range [k, ∞) if a > 0; (−∞, k] if a < 0.
Scaling: |b(x − h)| = |b|·|x − h|. A nonzero inside factor b changes widths by 1 ÷ |b|.
Equation: isolate |A| = B. For B > 0, A = B or A = −B. For B = 0, A = 0. For B < 0, no solution. Check the original.
For B > 0: |A| < B means −B < A < B. |A| ≤ B means −B ≤ A ≤ B.
For B > 0: |A| > B means A < −B or A > B. |A| ≥ B means A ≤ −B or A ≥ B.
For B < 0: |A| < B and |A| ≤ B have no solution; |A| > B and |A| ≥ B hold for every allowed input.
For B = 0: |A| < 0 has no solution; |A| ≤ 0 means A = 0; |A| > 0 means A ≠ 0; |A| ≥ 0 holds for every allowed input.
Inequalities: add or subtract everywhere. Multiply or divide by a negative and reverse every sign.
Intervals: (p, q) excludes both ends; [p, q] includes both. Mix symbols as needed. Infinity always takes a parenthesis. ∪ means union, combining allowed regions.
Intercepts: set output y = 0 for horizontal intercepts; set input x = 0 for the vertical intercept.
Slope = . Percent amount = × center.
Arithmetic: divide by − by multiplying by −2. Fractions must have matching bottoms before addition or subtraction.
Distance: size without direction
Alone, then two roads
Less thAND, greatOR
A bracket grabs the endpoint
Reminder
Reminder: Reference letters
- Reference letters. A is the whole inside calculation; B is the isolated number on the other side. The V uses h for the corner's horizontal coordinate, k for its height, and a for the outside multiplier.
Worked example
Rebuild a formula instead of memorizing the drawing
A V has corner (2, 1) and rises 3 units for each unit you move away. What rule belongs on your practice sheet?
What it asks. Use the corner and steepness to rebuild the formula, then check one point.
Show the steps and the answer
The plan. Put h = 2 and k = 1 into the V formula, use a = 3, and substitute the corner and one nearby input.
- Plan. Put h = 2 and k = 1 into the V formula, use a = 3, and substitute the corner and one nearby input.
- Distance from 2 is |x − 2|.
- A height increase of 3 per unit means multiply that distance by 3.
- .The distance is zero at x = 2; multiplying by 3 sets the rise and adding 1 sets the corner height.
- and .These checks recover the corner and a three-unit rise one unit to its right.
- Formula: f(x) = 3|x − 2| + 1.
- Corner: (2, 1).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use this reference after the lessons, then cover it and rebuild each line for closed-book practice.
5 How
- Get the absolute value alone. In an inequality, negative multiplication or division flips the sign. In an equation, equality remains equality.
- Inspect B, the number on the other side, after that isolation.
- If B is negative, equality or a smaller distance is impossible. A greater distance accepts every allowed input.
- If B is zero, decide whether the sign requires equality, excludes zero distance, or allows every nonnegative distance.
- For a required zero distance, solve A = 0 to find the center input. Substitute it back to confirm distance zero. For positive distance, exclude exactly the inputs where A = 0.
- If B is positive, use two equations for equality, between for a smaller distance, or outside for a greater distance. Check the answer in the original problem.
Solving any absolute value problem
- Isolate the bars and preserve the equation or comparison.
- Inspect the sign of B, the number on the other side.
- Choose the equation, between, outside, zero, or negative case from the decision map.
- Solve for every allowed input, then substitute into the original question.
- Write the requested notation, keeping individual answers as a set and intervals as intervals.
6 Worked example
Worked example
A negative coefficient hides a zero limit
Solve −2|x − 6| + 4 ≥ 4, and then solve −2|x − 6| + 4 > 4.
What it asks. For the same function, first find inputs with output at least four. Then find inputs with output strictly greater than four.
Show the steps and the answer
The plan. Undo the outside addition and negative multiplier in each comparison, then inspect whether the distance can be at most zero or below zero.
- Plan. Undo the outside addition and negative multiplier in each comparison, then inspect whether the distance can be at most zero or below zero.
- Dividing by negative two reverses either comparison.
- At most zero allows distance zero.
- Below zero allows no distance.
- For the first condition, subtract 4: .This undoes the outside addition before inspecting the isolated distance.
- Divide by −2: .The negative divisor changes the at least comparison into an at most comparison.
- Set x − 6 = 0 and add 6: .A nonnegative distance at most zero must equal zero, so this finds the only center input.
- Substitute x = 6 into the original: .The result confirms that this input passes the first inclusive comparison.
- For the second condition, subtract 4: .The outside addition is removed in the same way, but the comparison remains strict.
- Divide by : .Negative division changes greater than into less than.
- There is no solution to the second condition.No distance can be below zero, so no input can make the original output exceed four.
- For output at least 4: x = 6
- Set for that answer: {6}
- For output greater than 4: no solution
- Set for that answer: ∅
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Impossible negative length
Solve |x| < −3.
What it asks. Find whether any distance from zero can be smaller than negative three.
Show the steps and the answer
The plan. Compare every possible distance with its minimum value zero.
- Plan. Compare every possible distance with its minimum value zero.
- The bars are already alone.
- No distance lies below zero.
- for every real x.Distance cannot be negative.
- There is no solution.A value at least 0 cannot be smaller than −3.
- No solution
- Set: ∅
Rung 2 of 4
Every distance beats a negative limit
Solve |2x − 1| ≥ −3.
What it asks. Find all inputs whose distance expression is at least negative three.
Show the steps and the answer
The plan. Use nonnegative distance instead of splitting into two branches.
- Plan. Use nonnegative distance instead of splitting into two branches.
- Zero is already greater than negative three.
- The inside expression is defined for every real input.
- .All values of the bars are nonnegative.
- Every real x satisfies the condition.The linear expression is defined at every real input.
Rung 3 of 4
Exactly zero distance
Solve |2x − 1| ≤ 0.
What it asks. Find inputs making the distance at most zero.
Show the steps and the answer
The plan. Force the inside to zero, solve for x, and substitute back.
- Plan. Force the inside to zero, solve for x, and substitute back.
- The distance cannot be negative, so at most zero means exactly zero.
- Add one, then divide by two.
- Set .A nonnegative distance at most zero must equal zero. This equation locates the required center input.
- Add 1: . Divide by 2: .Undoing both inside operations isolates the one input with zero distance.
- Substitute: .The original comparison accepts this zero distance, confirming the answer.
- Set: {}
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Inspect B after isolating, not before. A negative outside multiplier can change its sign.
- Use the smallest possible distance, zero, to reason about a negative B.
- For one answer, write a set containing that one number, such as {6}. For no answers, write ∅. For every real input, write (−∞, ∞).
7 The trap
Using the formulas for B positive before checking the isolated limit. |x − 6| > −2 is true for every real x, so it does not need a pair of boundary equations.